BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

7 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

Gravitas Laboratories Private Limited, Greater Noida

8182606

IS 10238 (2001)

Fasteners - Threaded steel fasteners - Step bolts for steel structures - Specification (First Revision)

Step Bolts for Steel Structures

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GRADES)	-	0	-
5(MECHANICAL PROPERTIES)	-	22000	-
6-6.1(Nuts)	-	21999.99	-
6-6.2.1(Washers)	-	22000	-
6-.6.2.2(Washers)	-	22000	-
7(GENERAL REQUIREMENTS)	-	22000	-
8.1(FINISH)	-	22000	-
8.2()	-	22000	-
8.3()	-	22000	-
9(SAMPLING, INSPECTION AND ACCEPTANCE CRITERIA)	-	22000	-
10.1.1(TESTS)	-	22000	-
12(MARKING)	-	22000	-
13(PACKAGING)	-	22000	-
Table 3 (i)(Tensile strength, Rm, MPa)	-	22000	-
Table 3 (ii)(Lower yield strength)	-	22000	-
Table 3 (iii)(Stress at 0,2 % non-proportional elongation)	-	22000	-
table 3 (iv)(Stress at 0,0048d non-proportional elongation for full-size fasteners)	-	22000	-
Table 3 (v)((i) Stress under proof load (ii) Proof strength ratio)	-	22000	-
Table (vi)(Percentage elongation after fracture for machined test pieces)	-	22000	-
Table 3 (viii)(Elongation after fracture for full-size fasteners,)	-	22000	-
Table 3 (ix)(Head soundness)	-	22000	-
Table 3 (x)(Vickers hardness)	-	22000	-
table 3 (xi)(Brinell hardness)	-	22000	-
table 3()	-	22000	-
table 3 (xii)(Rockwell hardness, HRB Rockwell hardness, HRC)	-	22000	-
Table 3 (xiv)(Surface hardness)	-	22000	-
Table 3 (xv)(Height of non-decarburized thread zone,)	-	22000	-
Table 3 (xv)(Height of non-decarburized thread zone, Depth of complete decarburization in the thread,)	-	22000	-
table 3 (xvi)(Reduction of hardness after retempering HV)	-	22000	-
table 3 (xvii)(Breaking torque)	-	22000	-
table 3 (xviii)(Impact strength, KV)	-	22000	-
Table3 (xix)(Surface integrity in accordance with)	-	22000	-
table 3 (xvii)(Breaking torque Nm)	-	22000	-
3(DIMENSIONS AND TOLERANCES)	-	22000	-
CL 8(Finish)	-	22000	-
5(Torsion test)	-	22000	-
Clause 3(Thread Requirements)	-	22000	-
Clause 11(Designation)	-	0	-
Clause 13(Packaging)	-	0	-
CL 3(Dimensions and Tolerances)	-	22000	-
Table 3 (vii)(Percentage reduction of area after fracture for machined test pieces,)	-	22000	-

-
Included w.e.f. 17.08.2026

Standard Testing Laboratory Private Limited

8170106

IS 10238 (2001)

Fasteners - Threaded steel fasteners - Step bolts for steel structures - Specification (First Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GRADES)	-	12500	-
5(MECHANICAL PROPERTIES)	-	12500	-
6-6.1(Nuts)	-	12500	-
6-6.2.1(Washers)	-	12500	-
6-.6.2.2(Washers)	-	12500	-
7(GENERAL REQUIREMENTS)	-	12500	-
8.1(FINISH)	-	12500	-
8.2()	-	12500	-
8.3()	-	12500	-
9(SAMPLING, INSPECTION AND ACCEPTANCE CRITERIA)	-	12500	-
10.1.1(TESTS)	-	12500	-
12(MARKING)	-	12500	-
13(PACKAGING)	-	12500	-
Table 3 (i)(Tensile strength, Rm, MPa)	-	12500	-
Table 3 (ii)(Lower yield strength)	-	12500	-
Table 3 (iii)(Stress at 0,2 % non-proportional elongation)	-	12500	-
table 3 (iv)(Stress at 0,0048d non-proportional elongation for full-size fasteners)	-	12500	-
Table 3 (v)((i) Stress under proof load (ii) Proof strength ratio)	-	12500	-
Table (vi)(Percentage elongation after fracture for machined test pieces)	-	12500	-
Table 3 (vii)(Percentage reduction of area after fracture for machined test pieces,)	-	12500	-
Table 3 (viii)(Elongation after fracture for full-size fasteners,)	-	12500	-
Table 3 (ix)(Head soundness)	-	12500	-
Table 3 (x)(Vickers hardness)	-	12500	-
table 3 (xi)(Brinell hardness)	-	12500	-
table 3()	-	12500	-
table 3 (xii)(Rockwell hardness, HRB Rockwell hardness, HRC)	-	12500	-
Table 3 (xiv)(Surface hardness)	-	12500	-
Table 3 (xv)(Height of non-decarburized thread zone,)	-	12500	-
Table 3 (xv)(Height of non-decarburized thread zone, Depth of complete decarburization in the thread,)	-	12500	-
table 3 (xvi)(Reduction of hardness after retempering HV)	-	12500	-
table 3 (xvii)(Breaking torque)	-	12500	-
table 3 (xviii)(Impact strength, KV)	-	12500	-
Table3 (xix)(Surface integrity in accordance with)	-	12500	-
table 3 (xvii)(Breaking torque Nm)	-	12500	-
3(DIMENSIONS AND TOLERANCES)	-	12500	-
CL 3(Dimensions and Tolerances)	-	12500	-
CL 8(Finish)	-	12500	-
5(Torsion test)	-	12500	-
Clause 3(Thread Requirements)	-	12500	-
Clause 11(Designation)	-	12500	-
Clause 13(Packaging)	-	12500	-
4(GRADES)	-	12500	-
5(MECHANICAL PROPERTIES)	-	12500	-
6-6.1(Nuts)	-	12500	-
6-6.2.1(Washers)	-	12500	-
6-.6.2.2(Washers)	-	12500	-
7(GENERAL REQUIREMENTS)	-	12500	-
8.1(FINISH)	-	12500	-
8.2()	-	12500	-
8.3()	-	12500	-
9(SAMPLING, INSPECTION AND ACCEPTANCE CRITERIA)	-	12500	-
10.1.1(TESTS)	-	12500	-
12(MARKING)	-	12500	-
13(PACKAGING)	-	12500	-
Table 3 (i)(Tensile strength, Rm, MPa)	-	12500	-
Table 3 (ii)(Lower yield strength)	-	12500	-
Table 3 (iii)(Stress at 0,2 % non-proportional elongation)	-	12500	-
table 3 (iv)(Stress at 0,0048d non-proportional elongation for full-size fasteners)	-	12500	-
Table 3 (v)((i) Stress under proof load (ii) Proof strength ratio)	-	12500	-
Table (vi)(Percentage elongation after fracture for machined test pieces)	-	12500	-
Table 3 (vii)(Percentage reduction of area after fracture for machined test pieces,)	-	12500	-
Table 3 (viii)(Elongation after fracture for full-size fasteners,)	-	12500	-
Table 3 (ix)(Head soundness)	-	12500	-
Table 3 (x)(Vickers hardness)	-	12500	-
table 3 (xi)(Brinell hardness)	-	12500	-
table 3()	-	12500	-
table 3 (xii)(Rockwell hardness, HRB Rockwell hardness, HRC)	-	12500	-
Table 3 (xiv)(Surface hardness)	-	12500	-
Table 3 (xv)(Height of non-decarburized thread zone,)	-	12500	-
Table 3 (xv)(Height of non-decarburized thread zone, Depth of complete decarburization in the thread,)	-	12500	-
table 3 (xvi)(Reduction of hardness after retempering HV)	-	12500	-
table 3 (xvii)(Breaking torque)	-	12500	-
table 3 (xviii)(Impact strength, KV)	-	12500	-
Table3 (xix)(Surface integrity in accordance with)	-	12500	-
table 3 (xvii)(Breaking torque Nm)	-	12500	-
3(DIMENSIONS AND TOLERANCES)	-	12500	-
CL 3(Dimensions and Tolerances)	-	12500	-
CL 8(Finish)	-	12500	-
5(Torsion test)	-	12500	-
Clause 3(Thread Requirements)	-	12500	-
Clause 11(Designation)	-	12500	-
Clause 13(Packaging)	-	12500	-

10 Apr, 2028

-
Included w.e.f 09.02.2026

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 10238 (2001)

Fasteners - Threaded steel fasteners - Step bolts for steel structures - Specification (First Revision)

13200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GRADES)	-	13200	For complete testing
5(MECHANICAL PROPERTIES)	-	13200	For complete testing
6-6.1(Nuts)	-	13200	For complete testing
6-6.2.1(Washers)	-	13200	For complete testing
6-.6.2.2(Washers)	-	13200	For complete testing
7(GENERAL REQUIREMENTS)	-	13200	For complete testing
8.1(FINISH)	-	13200	For complete testing
8.2()	-	13200	For complete testing
8.3()	-	13200	For complete testing
9(SAMPLING, INSPECTION AND ACCEPTANCE CRITERIA)	-	13200	For complete testing
10.1.1(TESTS)	-	13200	For complete testing
12(MARKING)	-	13200	For complete testing
13(PACKAGING)	-	13200	For complete testing
Table 3 (i)(Tensile strength, Rm, MPa)	-	13200	For complete testing
Table 3 (ii)(Lower yield strength)	-	13200	For complete testing
Table 3 (iii)(Stress at 0,2 % non-proportional elongation)	-	13200	For complete testing
table 3 (iv)(Stress at 0,0048d non-proportional elongation for full-size fasteners)	-	13200	For complete testing
Table 3 (v)((i) Stress under proof load (ii) Proof strength ratio)	-	13200	For complete testing
Table (vi)(Percentage elongation after fracture for machined test pieces)	-	13200	For complete testing
Table 3 (vii)(Percentage reduction of area after fracture for machined test pieces,)	-	13200	For complete testing
Table 3 (viii)(Elongation after fracture for full-size fasteners,)	-	13200	For complete testing
Table 3 (ix)(Head soundness)	-	13200	For complete testing
Table 3 (x)(Vickers hardness)	-	13200	For complete testing
table 3 (xi)(Brinell hardness)	-	13200	For complete testing
table 3()	-	13200	For complete testing
table 3 (xii)(Rockwell hardness, HRB Rockwell hardness, HRC)	-	13200	For complete testing
Table 3 (xiv)(Surface hardness)	-	13200	For complete testing
Table 3 (xv)(Height of non-decarburized thread zone,)	-	13200	For complete testing
Table 3 (xv)(Height of non-decarburized thread zone, Depth of complete decarburization in the thread,)	-	13200	For complete testing
table 3 (xvi)(Reduction of hardness after retempering HV)	-	13200	For complete testing
table 3 (xvii)(Breaking torque)	-	13200	For complete testing
table 3 (xviii)(Impact strength, KV)	-	13200	For complete testing
Table3 (xix)(Surface integrity in accordance with)	-	13200	For complete testing
table 3 (xvii)(Breaking torque Nm)	-	13200	For complete testing
3(DIMENSIONS AND TOLERANCES)	-	13200	For complete testing
CL 3(Dimensions and Tolerances)	-	13200	For complete testing
CL 8(Finish)	-	13200	For complete testing
5(Torsion test)	-	13200	For complete testing
Clause 3(Thread Requirements)	-	13200	For complete testing
Clause 11(Designation)	-	13200	For complete testing
Clause 13(Packaging)	-	13200	For complete testing

-
Included w.e.f.03.07.2025

BIS, Eastern Regional Laboratory (ERL)

None

IS 10238 (2001)

Fasteners - Threaded steel fasteners - Step bolts for steel structures - Specification (First Revision)

For all sizes except for the tests mentioned in remarks

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (DIMENSIONS AND TOLERANCES)	-
8.1 (FINISH)	-
Table 3 (x) (Vickers hardness)	-
table 3 (xi) (Brinell hardness)	-
Table 3 (xiv) (Surface hardness)	-

-
Mech: Not available for Lower Yield Strength, Stress under proof load, Proof Load and Minimum Breaking Torque

BIS, Central Laboratory (CL)

None

IS 10238 (2001)

Fasteners - Threaded steel fasteners - Step bolts for steel structures - Specification (First Revision)

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (MECHANICAL PROPERTIES)	-
8.1 (FINISH)	-
8.2 ()	-
8.3 ()	-
7 (GENERAL REQUIREMENTS)	-
6-6.1 (Nuts)	-
6-6.2.1 (Washers)	-
6-.6.2.2 (Washers)	-

-
Complete for galvanized coating. Sample Size- 10 pcs. Ecluding Cl 5 - Tensile Test ("Tensile strength, lower yield strength, Stress under proof load, Spf; Proof strength ratio; Percentage elongation after fracture for min. machined test pieces, A, %; Percentage reduction of area after min. fracture for machined test pieces, Z, %;"); Head soundness; Surface integrity in accordance with ISO 6157-1; Torsional test; Tensile test under wedge loading; Surface hardness HV0.3; Non-carburization; Height of non-decarburized thread zone; Depth of complete decarburization in the thread; Reduction of hardness after retempering.

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 10238 (2001)

Fasteners - Threaded steel fasteners - Step bolts for steel structures - Specification (First Revision)

Grade C

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GRADES)	-	500	-
5(MECHANICAL PROPERTIES)	-	17200	-
6-6.1(Nuts)	-	1000	-
6-6.2.1(Washers)	-	1000	-
6-.6.2.2(Washers)	-	1000	-
7(GENERAL REQUIREMENTS)	-	500	-
8.1(FINISH)	-	500	-
8.2()	-	500	-
8.3()	-	500	-
9(SAMPLING, INSPECTION AND ACCEPTANCE CRITERIA)	-	100	-
10.1.1(TESTS)	-	1000	-
12(MARKING)	-	100	-
13(PACKAGING)	-	100	-
4(GRADES)	-	500	-
5(MECHANICAL PROPERTIES)	-	17200	-
6-6.1(Nuts)	-	1000	-
6-6.2.1(Washers)	-	1000	-
6-.6.2.2(Washers)	-	1000	-
7(GENERAL REQUIREMENTS)	-	500	-
8.1(FINISH)	-	500	-
8.2()	-	500	-
8.3()	-	500	-
9(SAMPLING, INSPECTION AND ACCEPTANCE CRITERIA)	-	100	-
10.1.1(TESTS)	-	1000	-
12(MARKING)	-	100	-
13(PACKAGING)	-	100	-
Table 3 (i)(Tensile strength, Rm, MPa)	-	1500	-
Table 3 (ii)(Lower yield strength)	-	1000	-
Table 3 (iii)(Stress at 0,2 % non-proportional elongation)	-	500	-
table 3 (iv)(Stress at 0,0048d non-proportional elongation for full-size fasteners)	-	500	-
Table 3 (v)((i) Stress under proof load (ii) Proof strength ratio)	-	500	-
Table (vi)(Percentage elongation after fracture for machined test pieces)	-	500	-
Table 3 (vii)(Percentage reduction of area after fracture for machined test pieces,)	-	500	-
Table 3 (viii)(Elongation after fracture for full-size fasteners,)	-	500	-
Table 3 (ix)(Head soundness)	-	1500	-
Table 3 (x)(Vickers hardness)	-	500	-
table 3 (xi)(Brinell hardness)	-	500	-
table 3()	-	100	-
table 3 (xii)(Rockwell hardness, HRB Rockwell hardness, HRC)	-	500	-
Table 3 (xiv)(Surface hardness)	-	500	-
Table 3 (xv)(Height of non-decarburized thread zone,)	-	500	-
Table 3 (xv)(Height of non-decarburized thread zone, Depth of complete decarburization in the thread,)	-	500	-
table 3 (xvi)(Reduction of hardness after retempering HV)	-	500	-
table 3 (xvii)(Breaking torque)	-	1600	-
table 3 (xviii)(Impact strength, KV)	-	3000	-
Table3 (xix)(Surface integrity in accordance with)	-	1000	-
table 3 (xvii)(Breaking torque Nm)	-	1600	-
3(DIMENSIONS AND TOLERANCES)	-	1000	-
4(GRADES)	-	500	-
5(MECHANICAL PROPERTIES)	-	17200	-
6-6.1(Nuts)	-	1000	-
6-6.2.1(Washers)	-	1000	-
6-.6.2.2(Washers)	-	1000	-
7(GENERAL REQUIREMENTS)	-	500	-
8.1(FINISH)	-	500	-
8.2()	-	500	-
8.3()	-	500	-
9(SAMPLING, INSPECTION AND ACCEPTANCE CRITERIA)	-	100	-
10.1.1(TESTS)	-	1000	-
12(MARKING)	-	100	-
13(PACKAGING)	-	100	-
Table 3 (i)(Tensile strength, Rm, MPa)	-	1500	-
Table 3 (ii)(Lower yield strength)	-	1000	-
Table 3 (iii)(Stress at 0,2 % non-proportional elongation)	-	500	-
table 3 (iv)(Stress at 0,0048d non-proportional elongation for full-size fasteners)	-	500	-
Table 3 (v)((i) Stress under proof load (ii) Proof strength ratio)	-	500	-
Table (vi)(Percentage elongation after fracture for machined test pieces)	-	500	-
Table 3 (vii)(Percentage reduction of area after fracture for machined test pieces,)	-	500	-
Table 3 (viii)(Elongation after fracture for full-size fasteners,)	-	500	-
Table 3 (ix)(Head soundness)	-	1500	-
Table 3 (x)(Vickers hardness)	-	500	-
table 3 (xi)(Brinell hardness)	-	500	-
table 3()	-	100	-
table 3 (xii)(Rockwell hardness, HRB Rockwell hardness, HRC)	-	500	-
Table 3 (xiv)(Surface hardness)	-	500	-
Table 3 (xv)(Height of non-decarburized thread zone,)	-	500	-
Table 3 (xv)(Height of non-decarburized thread zone, Depth of complete decarburization in the thread,)	-	500	-
table 3 (xvi)(Reduction of hardness after retempering HV)	-	500	-
table 3 (xvii)(Breaking torque)	-	1600	-
table 3 (xviii)(Impact strength, KV)	-	3000	-
Table3 (xix)(Surface integrity in accordance with)	-	1000	-
table 3 (xvii)(Breaking torque Nm)	-	1600	-
3(DIMENSIONS AND TOLERANCES)	-	1000	-
4(GRADES)	-	500	-
5(MECHANICAL PROPERTIES)	-	17200	-
6-6.1(Nuts)	-	1000	-
6-6.2.1(Washers)	-	1000	-
6-.6.2.2(Washers)	-	1000	-
7(GENERAL REQUIREMENTS)	-	500	-
8.1(FINISH)	-	500	-
8.2()	-	500	-
8.3()	-	500	-
9(SAMPLING, INSPECTION AND ACCEPTANCE CRITERIA)	-	100	-
10.1.1(TESTS)	-	1000	-
12(MARKING)	-	100	-
13(PACKAGING)	-	100	-
Table 3 (i)(Tensile strength, Rm, MPa)	-	1500	-
Table 3 (ii)(Lower yield strength)	-	1000	-
Table 3 (iii)(Stress at 0,2 % non-proportional elongation)	-	500	-
table 3 (iv)(Stress at 0,0048d non-proportional elongation for full-size fasteners)	-	500	-
Table 3 (v)((i) Stress under proof load (ii) Proof strength ratio)	-	500	-
Table (vi)(Percentage elongation after fracture for machined test pieces)	-	500	-
Table 3 (vii)(Percentage reduction of area after fracture for machined test pieces,)	-	500	-
Table 3 (viii)(Elongation after fracture for full-size fasteners,)	-	500	-
Table 3 (ix)(Head soundness)	-	1500	-
Table 3 (x)(Vickers hardness)	-	500	-
table 3 (xi)(Brinell hardness)	-	500	-
table 3()	-	100	-
table 3 (xii)(Rockwell hardness, HRB Rockwell hardness, HRC)	-	500	-
Table 3 (xiv)(Surface hardness)	-	500	-
Table 3 (xv)(Height of non-decarburized thread zone,)	-	500	-
Table 3 (xv)(Height of non-decarburized thread zone, Depth of complete decarburization in the thread,)	-	500	-
table 3 (xvi)(Reduction of hardness after retempering HV)	-	500	-
table 3 (xvii)(Breaking torque)	-	1600	-
table 3 (xviii)(Impact strength, KV)	-	3000	-
Table3 (xix)(Surface integrity in accordance with)	-	1000	-
table 3 (xvii)(Breaking torque Nm)	-	1600	-
3(DIMENSIONS AND TOLERANCES)	-	1000	-
CL 3(Dimensions and Tolerances)	-	1000	-
5(Torsion test)	-	1600	-
CL 8(Finish)	-	500	-

31 Dec, 2029

-
Included w.e.f. 04.04.2024

Institute for Auto Parts and Hand Tools Technology, Ludhiana

9126034

IS 10238 (2001)

Fasteners - Threaded steel fasteners - Step bolts for steel structures - Specification (First Revision)

All Grade/Type/Size/Designation etc. standard

13300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MECHANICAL PROPERTIES)	-	10600	Charges for all tests as per IS 1367-3 for Property class-4.6.
8.1(FINISH)	-	500	-
10.1.1(TESTS)	-	1000	Cantilever Test
5(MECHANICAL PROPERTIES)	-	0	-
8.1(FINISH)	-	0	-
10.1.1(TESTS)	-	0	-
4(GRADES)	-	0	-
6-6.1(Nuts)	-	0	-
6-6.2.1(Washers)	-	0	-
6-.6.2.2(Washers)	-	0	-
7(GENERAL REQUIREMENTS)	-	1200	Dimension
8.2()	-	0	-
8.3()	-	0	-
9(SAMPLING, INSPECTION AND ACCEPTANCE CRITERIA)	-	0	-
12(MARKING)	-	0	-
13(PACKAGING)	-	0	-

17 Feb, 2028

-
Included w.e.f. 22.02.2024

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number