BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

61 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

CHOKSI LABORATORIES LIMITED, INDORE

8136916

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Carbon %)	-	100	-
4.1(Silicon %)	-	100	-
4.1(Sulphur %)	-	100	-
4.1(Manganese %)	-	100	-
4.1(Phosphorus %)	-	100	-
4.1(Cr)	-	100	-
4.1(Mo)	-	150	-
4.1(V)	-	150	-
4.1( Copper %)	-	150	-
4.1(Ni)	-	150	-
4.1( Nitrogen%)	-	150	-
4.1( Aluminium %)	-	150	-
4.1( Ti)	-	150	-
4.1( Nb)	-	150	-
Cl 5(Deformations and Surface Characteristics)	-	150	-
Cl. 7.2 Table -2 (Nominal Mass)	-	150	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	200	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	300	-
Cl. 9.3, Table 4(Bend Test )	-	300	-
Cl. 8.1 Table 3(Elongation, percentage)	-	300	-
Cl. 8.1 Table 3(TS/YS ratio)	-	0	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	400	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	300	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	200	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	200	-
8.18.1 Table 3(Total elongation at maximum force)	-	300	-
5.7(PullOut (Bond Test))	-	2500	-
Cl. 6.1(Nominal Size)	-	0	-
Cl. 4.3(Visual Inspection.)	-	0	-
Cl. 5.2(Surface Characteristics)	-	150	-
Cl. 5.7(Average compressive strength of cubes at 28 days)	-	0	-
Cl. 5.7(Bond Strength at 0.25 mm slip)	-	0	-
Cl. 5.7(Date of testing of concrete cubes)	-	0	-
Cl. 5.7(Date of casting of concrete cubes)	-	0	-
4.1(Sulphur and phosphorous)	-	0	-
4.1(CE)	-	0	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	100	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	100	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	150	-
4.2(Niobium (Nb))	-	150	-
4.2(Boron (B))	-	150	-

31 Dec, 2026

-
-

MSME TESTING STATION, PUDUCHERRY

6183904

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

size upto 32 mm

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7.2(Weight)	-	500	--
Cl 9.3(Load In One Direction)	-	600	-
Cl 9.4(Load In Other Direction From Bend)	-	1000	-
Cl 6.1(Length, Width & Thickness)	-	600	-
Cl 8.1(UTM)	-	1200	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	300	-
4.1(Sulphur and phosphorous)	-	300	-
4.1(CE)	-	300	-
4.1( Nitrogen%)	-	300	-
4.1(Ni)	-	300	-
4.1(Mo)	-	300	-
4.1(Cr)	-	300	-
4.1( Ti)	-	300	-
4.1(V)	-	300	-
Cl 9.3(Load In One Direction)	-	300	-
4.1( Aluminium %)	-	300	-
4.1( Copper %)	-	300	-
4.1(Silicon %)	-	300	-
4.1(Sulphur %)	-	300	-
4.1(Phosphorus %)	-	300	-
4.1(Manganese %)	-	300	-
4.1(Carbon %)	-	300	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1000	-
Cl. 9.3, Table 4(Bend Test )	-	600	-
Cl. 8.1 Table 3(Elongation, percentage)	-	600	-
Cl. 8.1 Table 3(TS/YS ratio)	-	500	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1200	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	600	-
Cl. 7.2 Table -2 (Nominal Mass)	-	500	-
Cl. 6.1(Nominal Size)	-	500	-
4.1( Nb)	-	300	-

-
Exclusion: Cl 5 (Deformations and Surface Characteristics) Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar)) Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), ) 8.18.1 Table 3 (Total elongation at maximum force) 5.7 (PullOut (Bond Test)) 4.2 (Niobium (Nb)) 4.2 (Boron (B))

Shriram Research Institute

6104206

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

All Grades

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Nominal Size)	-	500	-
Cl. 7.2 Table -2 (Nominal Mass)	-	500	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	2000	-
Cl. 9.3, Table 4(Bend Test )	-	2000	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	2000	-
Cl 5(Deformations and Surface Characteristics)	-	3000	-
4.1(Carbon %)	-	5000	-
4.1(Sulphur %)	-	0	-
4.1(Phosphorus %)	-	0	-
4.1(Manganese %)	-	0	-
4.1( Nitrogen%)	-	0	-
4.1(Ni)	-	0	-
4.1(Cr)	-	0	-
4.1(Mo)	-	0	-
4.1(Silicon %)	-	0	-
4.1( Copper %)	-	0	-
4.1( Nb)	-	0	-
4.1( Ti)	-	0	-
4.1( Aluminium %)	-	0	-
4.1(V)	-	0	-

-
-

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

High strength deformed steel bars and wires

16500 View breakup
For BIS samples: 1.5 times of BIS testing charges,

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Carbon %)	-	700	5% discount for BIS
4.1(Manganese %)	-	700	5% discount for BIS
4.1(Phosphorus %)	-	700	5% discount for BIS
4.1(Sulphur %)	-	700	5% discount for BIS
4.1(Silicon %)	-	700	5% discount for BIS
4.1( Copper %)	-	700	5% discount for BIS
4.1(Cr)	-	700	5% discount for BIS
4.1(Mo)	-	700	5% discount for BIS
4.1(Ni)	-	700	5% discount for BIS
4.1( Nitrogen%)	-	700	5% discount for BIS
4.1(CE)	-	0	Nil
4.1(Sulphur and phosphorous)	-	1400	5% discount for BIS
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	700	5% discount for BIS
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	700	5% discount for BIS
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	700	5% discount for BIS
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	1400	5% discount for BIS
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	700	5% discount for BIS
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	700	5% discount for BIS
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	700	5% discount for BIS
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	700	5% discount for BIS
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	700	5% discount for BIS
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	700	5% discount for BIS
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	700	5% discount for BIS
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	0	Nil
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	0	Nil
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	0	Nil
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	0	Nil
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	0	Nil
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	0	Nil
Cl 5(Deformations and Surface Characteristics)	-	0	Nil
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	0	Nil
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	0	Nil
Cl 6.1(Length, Width & Thickness)	-	700	5% discount for BIS
Cl 7.2(Weight)	-	0	Nil
Cl 8.1(UTM)	-	0	Nil
Cl. 8.1 Table 3(Elongation, percentage)	-	0	5% discount for BIS
Cl. 8.1 Table 3(TS/YS ratio)	-	0	Nil
Cl. 8.1 Table 3(Tensile Strength (TS))	-	0	5% discount for BIS
Cl. 8.1 Table 3(Yield Stress (YS))	-	0	5% discount for BIS
Cl 9.3(Load In One Direction)	-	700	5% discount for BIS
Cl. 9.3, Table 4(Bend Test )	-	700	5% discount for BIS
Cl 9.4(Load In Other Direction From Bend)	-	700	5% discount for BIS
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	700	5% discount for BIS
4.2(Niobium (Nb))	-	700	5% discount for BIS
4.2(Boron (B))	-	700	5% discount for BIS
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	700	5% discount for BIS
Cl. 6.1(Nominal Size)	-	700	5% discount for BIS
Cl 7.2(Weight)	-	700	5% discount for BIS
9.2(Tensile test,IS:1608(Pt1)-2018)	-	700	5% discount for BIS
Clause 9.4(Rebend Test)	-	700	5% discount for BIS

-
EXCLUSIONS: Pull out test. The scope may be restricted upto 12 mm.

Arihant Analytical Laboratory Pvt. Ltd., Sonipat

9167906

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Diameter 8mm to 32mm TMT Steel

15500.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.2 Table -2 (Nominal Mass)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
Cl. 8.1 Table 3(Yield Stress (YS))	-	800.00	We have declared our charges. However we shall accept BIS approved rates.
Cl. 8.1 Table 3(Elongation, percentage)	-	0.00	We have declared our charges. However we shall accept BIS approved rates.
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1200.00	We have declared our charges. However we shall accept BIS approved rates.
Cl. 9.3, Table 4(Bend Test )	-	1000.00	We have declared our charges. However we shall accept BIS approved rates.
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1000.00	We have declared our charges. However we shall accept BIS approved rates.
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	1000.00	We have declared our charges. However we shall accept BIS approved rates.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	1000.00	We have declared our charges. However we shall accept BIS approved rates.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	1000.00	We have declared our charges. However we shall accept BIS approved rates.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	1000.00	We have declared our charges. However we shall accept BIS approved rates.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	6500.00	We have declared our charges. However we shall accept BIS approved rates.
5.7(Pull-out test - IS:2770(P1))	-	5000.00	We have declared our charges. However we shall accept BIS approved rates.
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500.00	We have declared our charges. However we shall accept BIS approved rates.

02 Jun, 2027

-
Pull out test is already under exclusion, and the same will be under exclusion in the renewed scope Exclusion: Pull out test

CEG Test House & Research Centre Private Limited, Jaipur

8119706

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Fe - 415, 415D, 415S, 500, 500D, 500S, 600, 650, 700

6300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	6300	All Physical Test , Chemical Test
Cl 7.2(Weight)	-	1	NA
Cl 9.3(Load In One Direction)	-	1	NA
Cl 9.4(Load In Other Direction From Bend)	-	1	NA
Cl 9.3(Load In One Direction)	-	6300	Na
4.1(CE)	-	6300	Na
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	6300	Na
Cl 5(Deformations and Surface Characteristics)	-	1000	Na
Cl. 6.1(Nominal Size)	-	1000	Na
7.1(Specified length)	-	1000	Na
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	1000	NA
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	1000	NA
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	1000	Na
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	1000	NA
5.7(PullOut (Bond Test))	-	1000	Na
Clause 6.3(Effective Cross-sectional Area)	-	1000	NA
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	1000	Na
Cl. 8.1 Table 3(Yield Stress (YS))	-	1000	Na
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	Na
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1000	Na
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	Na

31 Dec, 2026

-
Upto 32 mm only. Except Cr, Mn, Mo,V, N, Cu, Ni, Nb, B, Nb+V+B+Ti, AL

RITES Eastern Region Laboratory, Kolkata

5135804

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

5600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1(Nominal Size)	-	100	PER SAMPLE
Cl 7.2(Weight)	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness
Cl 6.1(Length, Width & Thickness)	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness
Cl 5(Deformations and Surface Characteristics)	-	0	Pull test test Facility not available.
Cl. 8.1 Table 3(Elongation, percentage)	-	1500	Testing charges Rs.1500/- for UTS,YS,%E
Cl. 8.1 Table 3(TS/YS ratio)	-	0	Testing charges Rs.1500/- for UTS,YS,%E
Cl. 8.1 Table 3(Tensile Strength (TS))	-	0	Testing charges Rs.1500/- for UTS,YS,%E
Cl. 8.1 Table 3(Yield Stress (YS))	-	0	Testing charges Rs.1500/- for UTS,YS,%E
Cl. 7.2 Table -2 (Nominal Mass)	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness, projected area
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	0	Rs.100 includes for both Nominal Size ,weight, length, width, thickness, mean area
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1000	Rs.1000/- for both bend and Re-bend test
Cl. 9.3, Table 4(Bend Test )	-	0	Rs.1000/- for both bend and Re-bend test
Cl 9.3(Load In One Direction)	-	500	per sample
Cl 8.1(UTM)	-	0	UTS CHARGE
Cl 9.4(Load In Other Direction From Bend)	-	1000	PER SAMPLE
4.1(Sulphur and phosphorous)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(CE)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1( Nitrogen%)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Ni)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Mo)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Cr)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1( Ti)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(V)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1( Aluminium %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1( Copper %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Silicon %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Sulphur %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Phosphorus %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Manganese %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1(Carbon %)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
4.1( Nb)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	800	Testing charges Rs.800/- for all elements - as per IS through Spectrometer
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	500	including
Cl. 4.3(Visual Inspection.)	-	500	including
Cl. 5.2(Surface Characteristics)	-	100	per sample
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	500	The ribs contributing the projected area - Transverse Ribs & Longitudinal Ribs
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	0	The ribs contributing the projected area - Transverse Ribs & Longitudinal Ribs
Clause 6.3(Effective Cross-sectional Area)	-	100	per sample
4.2(Boron (B))	-	800	for all chemical analysis

19 Mar, 2026

-
Except Pull out test

MSME TESTING STATION, HYDERABAD

6181104

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Grade: Fe 415,to 600D, Sizes: up to and including 25mm

14500 View breakup
-

Clause No.	Exclusion	Remark
Cl 9.4(Load In Other Direction From Bend)	-	-
Cl 9.3(Load In One Direction)	-	-
Cl 7.2(Weight)	-	-
Cl 6.1(Length, Width & Thickness)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-
Cl 9.3(Load In One Direction)	-	-
Cl 7.2(Weight)	-	-
Cl 6.1(Length, Width & Thickness)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-
Cl 9.3(Load In One Direction)	-	-
Cl 8.1(UTM)	-	-
Cl 7.2(Weight)	-	-
Cl 6.1(Length, Width & Thickness)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	-
4.1(Sulphur and phosphorous)	-	-
4.1(CE)	-	-
4.1(Ni)	-	-
4.1(Mo)	-	-
4.1(Cr)	-	-
4.1( Ti)	-	-
4.1(V)	-	-
4.1( Nb)	-	-
4.1( Aluminium %)	-	-
4.1( Copper %)	-	-
4.1(Silicon %)	-	-
4.1(Sulphur %)	-	-
4.1(Phosphorus %)	-	-
4.1(Manganese %)	-	-
4.1(Carbon %)	-	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	-
Cl. 9.3, Table 4(Bend Test )	-	-
Cl. 8.1 Table 3(Elongation, percentage)	-	-
Cl. 8.1 Table 3(TS/YS ratio)	-	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	-
Cl. 7.2 Table -2 (Nominal Mass)	-	-
Cl. 6.1(Nominal Size)	-	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	-
8.18.1 Table 3(Total elongation at maximum force)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
4.2(Niobium (Nb))	-	-
4.2(Boron (B))	-	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	-
Cl. 8.1 Table 3(Maximum Extension)	-	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	-
Cl. 4.3(Visual Inspection.)	-	-
Cl. 5.2(Surface Characteristics)	-	-
Clause 9.4(Rebend Test)	-	-
Clause 6.3(Effective Cross-sectional Area)	-	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-
Cl 9.3(Load In One Direction)	-	-
Cl 8.1(UTM)	-	-
Cl 7.2(Weight)	-	-
Cl 6.1(Length, Width & Thickness)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
Cl 6.1(Length, Width & Thickness)	-	-
Cl 7.2(Weight)	-	-
Cl 8.1(UTM)	-	-
Cl 9.3(Load In One Direction)	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	-
4.3(Rolling and cold working of bars/wire)	-	-
7.1(Specified length)	-	-
9.1(Preparation of test sample)	-	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	-
9.5(Retest)	-	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	-
4.1( Nitrogen%)	-	-
13(Identification and marking)	-	-
12(Inspection)	-	-
1()	-	-

17 Oct, 2027

-
Excluding Pull-Out Test.

MSME-TESTING STATION, KOLHAPUR

7179134

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Fe415, Fe415D, Fe500, Fe500D, Fe550, Fe550D, Fe600

6400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	1	(Complete test charges applicable)
Cl 7.2(Weight)	-	1	(Complete test charges applicable)
Cl. 7.2 Table -2 (Nominal Mass)	-	1	(Complete test charges applicable)
Cl 8.1(UTM)	-	1	(Complete test charges applicable)
Cl. 8.1 Table 3(Yield Stress (YS))	-	1	(Complete test charges applicable)
Cl. 8.1 Table 3(Elongation, percentage)	-	1	(Complete test charges applicable)
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1	(Complete test charges applicable)
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1	(Complete test charges applicable)
Cl. 9.3, Table 4(Bend Test )	-	1	(Complete test charges applicable)
Cl 9.4(Load In Other Direction From Bend)	-	1	(Complete test charges applicable)
Cl 9.3(Load In One Direction)	-	1	(Complete test charges applicable)
Cl 7.2(Weight)	-	1	(Complete test charges applicable)
Cl 7.2(Weight)	-	1	(Complete test charges applicable)
Cl 7.2(Weight)	-	1	(Complete test charges applicable)
Cl 9.4(Load In Other Direction From Bend)	-	1	(Complete test charges applicable)
Cl 9.4(Load In Other Direction From Bend)	-	1	(Complete test charges applicable)
Clause 9.4(Rebend Test)	-	1	(Complete test charges applicable)
Cl 9.4(Load In Other Direction From Bend)	-	1	(Complete test charges applicable)
Cl 9.4(Load In Other Direction From Bend)	-	1	(Complete test charges applicable)
9.2(Tensile test,IS:1608(Pt1)-2018)	-	1	(Complete test charges applicable)
Cl 7.2(Weight)	-	1	(Complete test charges applicable)
Clause 6.3(Effective Cross-sectional Area)	-	1	(Complete test charges applicable)

30 Jul, 2027

-
For Mechanical Parameters only.

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

fe415,415d,415s,500,500d,500s,550,550d,600

38500 View breakup
Pull out Test-Rs.20000/-, Micro alloying elements-Rs.8500-, for Physical test-Rs.10000/- (15% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl 9.3(Load In One Direction)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl 9.4(Load In Other Direction From Bend)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl 5(Deformations and Surface Characteristics)	-	6666.66	FOR BIS SAMPLES:15% DISCOUNT
Cl 6.1(Length, Width & Thickness)	-	0	FOR BIS SAMPLES:15% DISCOUNT
Cl 7.2(Weight)	-	0	FOR BIS SAMPLES:15% DISCOUNT
4.1(Sulphur and phosphorous)	-	0	FOR BIS SAMPLES:15% DISCOUNT
4.1(CE)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1( Nitrogen%)	-	2000	FOR BIS SAMPLES:15% DISCOUNT
4.1(Ni)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(Mo)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(Cr)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1( Ti)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(V)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1( Nb)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
4.1( Aluminium %)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1( Copper %)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(Silicon %)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(Sulphur %)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
4.1(Phosphorus %)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
4.1(Manganese %)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(Carbon %)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	500	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	0	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	500	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	2000	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl. 8.1 Table 3(TS/YS ratio)	-	0	FOR BIS SAMPLES:15% DISCOUNT
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1500	FOR BIS SAMPLES:15% DISCOUNT
Cl. 8.1 Table 3(Yield Stress (YS))	-	1500	FOR BIS SAMPLES:15% DISCOUNT
Cl. 7.2 Table -2 (Nominal Mass)	-	0	FOR BIS SAMPLES:15% DISCOUNT
Cl. 6.1(Nominal Size)	-	0	FOR BIS SAMPLES:15% DISCOUNT
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	6666.66	FOR BIS SAMPLES:15% DISCOUNT
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	6666.66	FOR BIS SAMPLES:15% DISCOUNT

31 Dec, 2026

-
-

Spectro Analytical Labs Private Limited, Gautam Buddha Nagar

8130426

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

UPTO 32 MM DIA

10100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5(Deformations and Surface Characteristics)	-	1000	NA
Cl 6.1(Length, Width & Thickness)	-	1000	NA
Cl 7.2(Weight)	-	1000	NA
Cl 8.1(UTM)	-	1500	NA
Cl 9.3(Load In One Direction)	-	1000	NA
Cl 9.4(Load In Other Direction From Bend)	-	1000	NA
8.18.1 Table 3(Total elongation at maximum force)	-	1500	NA
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	1500	complete chemical composition is 1500 INR individual element is 300 INR
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	1500	complete chemical composition is 1500 INR individual element is 300 INR
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	1500	complete chemical composition is 1500 INR individual element is 300 INR
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	1500	complete chemical composition is 1500 INR individual element is 300 INR
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	1500	complete chemical composition is 1500 INR individual element is 300 INR
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	1500	complete chemical composition is 1500 INR individual element is 300 INR
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1500	NA
Cl. 9.3, Table 4(Bend Test )	-	1000	NA
Clause 9.4(Rebend Test)	-	1000	NA
Cl. 8.1 Table 3(Yield Stress (YS))	-	1500	NA
Cl. 8.1 Table 3(Elongation, percentage)	-	1500	NA
Cl. 8.1 Table 3(TS/YS ratio)	-	1000	NA
4.1(CE)	-	1500	complete chemical composition is 1500 INR individual element is 300 INR
4.1( Nb)	-	1500	complete chemical composition is 1500 INR individual element is 300 INR
4.1(V)	-	1500	complete chemical composition is 1500 INR individual element is 300 INR
4.2(Boron (B))	-	1500	complete chemical composition is 1500 INR individual element is 300 INR
4.1( Ti)	-	1500	complete chemical composition is 1500 INR individual element is 300 INR
4.1(Cr)	-	1500	complete chemical composition is 1500 INR individual element is 300 INR
4.1( Copper %)	-	1500	complete chemical composition is 1500 INR individual element is 300 INR
4.1(Ni)	-	1500	complete chemical composition is 1500 INR individual element is 300 INR
4.1(Mo)	-	1500	complete chemical composition is 1500 INR individual element is 300 INR
4.1( Aluminium %)	-	1500	complete chemical composition is 1500 INR individual element is 300 INR
Cl. 6.1(Nominal Size)	-	1000	NA
Clause 6.3(Effective Cross-sectional Area)	-	1000	NA
Cl 7.2(Weight)	-	1000	NA
5.7(PullOut (Bond Test))	-	0	Facility not available
Cl. 4.3(Visual Inspection.)	-	1000	NA

04 Jan, 2027

-
-

TATA STEEL, Jamshedpur

5182706

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Fe 600/Rebar/ 45 mm

10460 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	4000	-
Cl 9.3(Load In One Direction)	-	4000	-
Cl 8.1(UTM)	-	4000	-
Cl 7.2(Weight)	-	4000	-
Cl 6.1(Length, Width & Thickness)	-	2460	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
Cl 9.4(Load In Other Direction From Bend)	-	4000	-
Cl 9.3(Load In One Direction)	-	4000	-
Cl 8.1(UTM)	-	4000	-
Cl 7.2(Weight)	-	4000	-
Cl 6.1(Length, Width & Thickness)	-	2460	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
Cl 9.4(Load In Other Direction From Bend)	-	4000	-
Cl 9.3(Load In One Direction)	-	4000	-
Cl 8.1(UTM)	-	4000	-
Cl 7.2(Weight)	-	4000	-
Cl 6.1(Length, Width & Thickness)	-	2460	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	4000	-
4.1(Sulphur and phosphorous)	-	4000	-
4.1(CE)	-	4000	-
4.1( Nitrogen%)	-	4000	-
4.1(Ni)	-	4000	-
4.1(Mo)	-	4000	-
4.1(Cr)	-	4000	-
4.1( Ti)	-	4000	-
4.1(V)	-	4000	-
4.1( Nb)	-	4000	-
4.1( Aluminium %)	-	4000	-
4.1( Copper %)	-	4000	-
4.1(Silicon %)	-	4000	-
4.1(Sulphur %)	-	4000	-
4.1(Phosphorus %)	-	4000	-
4.1(Manganese %)	-	4000	-
4.1(Carbon %)	-	4000	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	4000	-
Cl. 9.3, Table 4(Bend Test )	-	4000	-
Cl. 8.1 Table 3(Elongation, percentage)	-	4000	-
Cl. 8.1 Table 3(TS/YS ratio)	-	4000	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	4000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	4000	-
Cl. 7.2 Table -2 (Nominal Mass)	-	4000	-
Cl. 6.1(Nominal Size)	-	4000	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	4000	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	4000	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	4000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	4000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	4000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	4000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	4000	-
8.18.1 Table 3(Total elongation at maximum force)	-	4000	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
4.2(Niobium (Nb))	-	4000	-
4.2(Boron (B))	-	4000	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	4000	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	4000	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	4000	-
Cl. 8.1 Table 3(Maximum Extension)	-	4000	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	4000	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	4000	-
Cl. 4.3(Visual Inspection.)	-	2460	-
Cl. 5.2(Surface Characteristics)	-	2460	-
Clause 9.4(Rebend Test)	-	4000	-
Clause 6.3(Effective Cross-sectional Area)	-	4000	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	4000	-
Cl 9.4(Load In Other Direction From Bend)	-	4000	-
Cl 9.3(Load In One Direction)	-	4000	-
Cl 8.1(UTM)	-	4000	-
Cl 7.2(Weight)	-	4000	-
Cl 6.1(Length, Width & Thickness)	-	2460	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
Cl 6.1(Length, Width & Thickness)	-	2460	-
Cl 7.2(Weight)	-	4000	-
Cl 8.1(UTM)	-	4000	-
Cl 9.3(Load In One Direction)	-	4000	-
Cl 9.4(Load In Other Direction From Bend)	-	4000	-
13(Identification and marking)	-	4000	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	2460	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	4000	-
4.3(Rolling and cold working of bars/wire)	-	0	-
7.1(Specified length)	-	4000	-
9.1(Preparation of test sample)	-	2460	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	4000	-
9.5(Retest)	-	4000	-
12(Inspection)	-	2460	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	4000	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	4000	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	4000	-
1()	-	0	-

25 Nov, 2027

-
Exclusion: Cl.5.7 (Pull Out (Bond Test))

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

All Grade / Type / Size / Designation

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Load In One Direction)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8.1(UTM)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7.2(Weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.1(Length, Width & Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5(Deformations and Surface Characteristics)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.4(Load In Other Direction From Bend)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Load In One Direction)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8.1(UTM)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7.2(Weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.1(Length, Width & Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5(Deformations and Surface Characteristics)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.4(Load In Other Direction From Bend)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Load In One Direction)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8.1(UTM)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7.2(Weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.1(Length, Width & Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5(Deformations and Surface Characteristics)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Sulphur and phosphorous)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(CE)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1( Nitrogen%)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Ni)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Mo)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Cr)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1( Ti)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(V)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1( Nb)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1( Aluminium %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1( Copper %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Silicon %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Sulphur %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Phosphorus %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Manganese %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Carbon %)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.3, Table 4(Bend Test )	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.1 Table 3(TS/YS ratio)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.1 Table 3(Yield Stress (YS))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.2 Table -2 (Nominal Mass)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6.1(Nominal Size)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.18.1 Table 3(Total elongation at maximum force)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5(Deformations and Surface Characteristics)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.7(PullOut (Bond Test))	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Niobium (Nb))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Boron (B))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.7(Average compressive strength of cubes at 28 days)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.7(Bond Strength at 0.25 mm slip)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.7(Date of testing of concrete cubes)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.7(Date of casting of concrete cubes)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.1 Table 3(TS/YS Ratio)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.1 Table 3(Maximum Extension)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 4.3(Visual Inspection.)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.2(Surface Characteristics)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 9.4(Rebend Test)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 6.3(Effective Cross-sectional Area)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.4(Load In Other Direction From Bend)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Load In One Direction)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8.1(UTM)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7.2(Weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.1(Length, Width & Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5(Deformations and Surface Characteristics)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5(Deformations and Surface Characteristics)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.1(Length, Width & Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7.2(Weight)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8.1(UTM)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.3(Load In One Direction)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9.4(Load In Other Direction From Bend)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13(Identification and marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.7(Pull-out test - IS:2770(P1))	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.0 & 7.1(Specified lengths - SOP MT-23)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.3(Rolling and cold working of bars/wire)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Specified length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Preparation of test sample)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Tensile test,IS:1608(Pt1)-2018)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.5(Retest)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12(Inspection)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
1()	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

Atmy Analytical Labs Pvt. Ltd., Faridabad

8167506

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	25000	With pullout test
Cl 9.3(Load In One Direction)	-	25000	With pullout test
Cl 8.1(UTM)	-	25000	With pullout test
Cl 7.2(Weight)	-	25000	With pullout test
Cl 6.1(Length, Width & Thickness)	-	25000	With pullout test
Cl 5(Deformations and Surface Characteristics)	-	25000	With pullout test
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	25000	With pullout test
4.1(Sulphur and phosphorous)	-	25000	With pullout test
4.1(CE)	-	25000	With pullout test
4.1( Nitrogen%)	-	25000	With pullout test
4.1(Silicon %)	-	25000	With pullout test
4.1(Ni)	-	25000	With pullout test
4.1(Mo)	-	25000	With pullout test
4.1(Cr)	-	25000	With pullout test
4.1( Ti)	-	25000	With pullout test
4.1(V)	-	25000	With pullout test
4.1( Nb)	-	25000	With pullout test
4.1( Aluminium %)	-	25000	With pullout test
4.1( Copper %)	-	25000	With pullout test
4.1(Sulphur %)	-	25000	With pullout test
4.1(Phosphorus %)	-	25000	With pullout test
4.1(Manganese %)	-	25000	With pullout test
4.1(Carbon %)	-	25000	With pullout test
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	25000	With pullout test
Cl. 9.3, Table 4(Bend Test )	-	25000	With pullout test
Cl. 8.1 Table 3(Elongation, percentage)	-	25000	With pullout test
Cl. 8.1 Table 3(Tensile Strength (TS))	-	25000	With pullout test
Cl. 8.1 Table 3(Yield Stress (YS))	-	25000	With pullout test
Cl. 7.2 Table -2 (Nominal Mass)	-	25000	With pullout test
Cl. 6.1(Nominal Size)	-	25000	With pullout test
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	25000	With pullout test
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	25000	With pullout test
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	25000	With pullout test
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	25000	With pullout test
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	25000	With pullout test
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	25000	With pullout test
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	25000	With pullout test
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	25000	With pullout test
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	25000	With pullout test
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	25000	With pullout test
8.18.1 Table 3(Total elongation at maximum force)	-	25000	With pullout test
5.7(PullOut (Bond Test))	-	25000	With pullout test
4.2(Niobium (Nb))	-	25000	With pullout test
4.2(Boron (B))	-	25000	With pullout test
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	25000	With pullout test
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	25000	With pullout test
Cl. 8.1 Table 3(TS/YS Ratio)	-	25000	With pullout test
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	25000	With pullout test
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	25000	With pullout test
Cl. 4.3(Visual Inspection.)	-	25000	With pullout test
Cl. 5.2(Surface Characteristics)	-	25000	With pullout test
13(Identification and marking)	-	25000	With pullout test

25 Feb, 2027

-
Included w.e.f. 07.10.2022 Inclusive of Pull-out test

Adityapur Auto Cluster, Adityapur

5178506

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	12000	-
Cl 9.3(Load In One Direction)	-	12000	-
Cl 8.1(UTM)	-	12000	-
Cl 7.2(Weight)	-	12000	-
Cl 6.1(Length, Width & Thickness)	-	12000	-
Cl 5(Deformations and Surface Characteristics)	-	12000	-
Cl 9.4(Load In Other Direction From Bend)	-	12000	-
Cl 9.3(Load In One Direction)	-	12000	-
Cl 8.1(UTM)	-	12000	-
Cl 7.2(Weight)	-	12000	-
Cl 6.1(Length, Width & Thickness)	-	12000	-
Cl 5(Deformations and Surface Characteristics)	-	12000	-
Cl 9.4(Load In Other Direction From Bend)	-	12000	-
Cl 9.3(Load In One Direction)	-	12000	-
Cl 8.1(UTM)	-	12000	-
Cl 7.2(Weight)	-	12000	-
Cl 6.1(Length, Width & Thickness)	-	12000	-
Cl 5(Deformations and Surface Characteristics)	-	12000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	12000	-
4.1(Sulphur and phosphorous)	-	12000	-
4.1(CE)	-	12000	-
4.1( Nitrogen%)	-	12000	-
4.1(Ni)	-	12000	-
4.1(Mo)	-	12000	-
4.1(Cr)	-	12000	-
4.1( Ti)	-	12000	-
4.1(V)	-	12000	-
4.1( Nb)	-	12000	-
4.1( Aluminium %)	-	12000	-
4.1( Copper %)	-	12000	-
4.1(Silicon %)	-	12000	-
4.1(Sulphur %)	-	12000	-
4.1(Phosphorus %)	-	12000	-
4.1(Manganese %)	-	12000	-
4.1(Carbon %)	-	12000	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	12000	-
Cl. 9.3, Table 4(Bend Test )	-	12000	-
Cl. 8.1 Table 3(Elongation, percentage)	-	12000	-
Cl. 8.1 Table 3(TS/YS ratio)	-	12000	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	12000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	12000	-
Cl. 7.2 Table -2 (Nominal Mass)	-	12000	-
Cl. 6.1(Nominal Size)	-	12000	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	12000	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	12000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	12000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	12000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	12000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	12000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	12000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	12000	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	12000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	12000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	12000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	12000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	12000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	12000	-
8.18.1 Table 3(Total elongation at maximum force)	-	12000	-
Cl 5(Deformations and Surface Characteristics)	-	12000	-
5.7(PullOut (Bond Test))	-	12000	-
4.2(Niobium (Nb))	-	12000	-
4.2(Boron (B))	-	12000	-
Cl. 5.7(Average compressive strength of cubes at 28 days)	-	12000	-
Cl. 5.7(Bond Strength at 0.25 mm slip)	-	12000	-
Cl. 5.7(Date of testing of concrete cubes)	-	12000	-
Cl. 5.7(Date of casting of concrete cubes)	-	12000	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	12000	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	12000	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	12000	-
Cl. 8.1 Table 3(Maximum Extension)	-	12000	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	12000	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	12000	-
Cl. 4.3(Visual Inspection.)	-	12000	-
Cl. 5.2(Surface Characteristics)	-	12000	-
Clause 9.4(Rebend Test)	-	12000	-
Clause 6.3(Effective Cross-sectional Area)	-	12000	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	12000	-
Cl 9.4(Load In Other Direction From Bend)	-	12000	-
Cl 9.3(Load In One Direction)	-	12000	-
Cl 8.1(UTM)	-	12000	-
Cl 7.2(Weight)	-	12000	-
Cl 6.1(Length, Width & Thickness)	-	12000	-
Cl 5(Deformations and Surface Characteristics)	-	12000	-
Cl 5(Deformations and Surface Characteristics)	-	12000	-
Cl 6.1(Length, Width & Thickness)	-	12000	-
Cl 7.2(Weight)	-	12000	-
Cl 8.1(UTM)	-	12000	-
Cl 9.3(Load In One Direction)	-	12000	-
Cl 9.4(Load In Other Direction From Bend)	-	12000	-
13(Identification and marking)	-	12000	-
5.7(Pull-out test - IS:2770(P1))	-	12000	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	12000	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	12000	-
4.3(Rolling and cold working of bars/wire)	-	12000	-
7.1(Specified length)	-	12000	-
9.1(Preparation of test sample)	-	12000	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	12000	-
9.5(Retest)	-	12000	-
12(Inspection)	-	12000	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	12000	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	12000	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	12000	-
1()	-	12000	-

28 Jun, 2027

-
scope restricted upto 40mm Exclusion: Pull out test

MICRO ENGINEERING AND TESTING LABORATORY OPC PRIVATE LIMITED, SONIPAT

9186006

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

High Strength Deformed Steel Bars and Wires

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	300	-
4.1(Sulphur and phosphorous)	-	500	-
4.1(CE)	-	300	-
4.1( Nitrogen%)	-	300	-
4.1(Ni)	-	300	-
4.1(Mo)	-	300	-
4.1(Cr)	-	300	-
4.1( Ti)	-	300	-
4.1(V)	-	300	-
4.1( Nb)	-	300	-
4.1( Aluminium %)	-	300	-
4.1( Copper %)	-	300	-
4.1(Silicon %)	-	300	-
4.1(Sulphur %)	-	300	-
4.1(Phosphorus %)	-	300	-
4.1(Manganese %)	-	300	-
4.1(Carbon %)	-	300	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	800	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	800	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	800	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	800	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	800	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	800	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	300	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	500	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	300	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	300	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	300	-
4.2(Niobium (Nb))	-	300	-
4.2(Boron (B))	-	300	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	0	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	1500	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	1500	-
1()	-	0	-
Cl 9.4(Load In Other Direction From Bend)	-	400	-
Cl 9.3(Load In One Direction)	-	400	-
Cl 7.2(Weight)	-	250	-
Cl 6.1(Length, Width & Thickness)	-	400	-
Cl 5(Deformations and Surface Characteristics)	-	0	-
Cl 9.4(Load In Other Direction From Bend)	-	400	-
Cl 9.3(Load In One Direction)	-	400	-
Cl 7.2(Weight)	-	250	-
Cl 6.1(Length, Width & Thickness)	-	400	-
Cl 5(Deformations and Surface Characteristics)	-	0	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	400	-
Cl. 9.3, Table 4(Bend Test )	-	400	-
Cl. 8.1 Table 3(Elongation, percentage)	-	800	-
Cl. 8.1 Table 3(TS/YS ratio)	-	400	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1100	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	500	-
Cl. 7.2 Table -2 (Nominal Mass)	-	250	-
Cl. 6.1(Nominal Size)	-	250	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	800	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	800	-
8.18.1 Table 3(Total elongation at maximum force)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	0	-
5.7(PullOut (Bond Test))	-	0	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	400	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	400	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	400	-
Cl. 8.1 Table 3(Maximum Extension)	-	500	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	500	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	250	-
Cl. 4.3(Visual Inspection.)	-	250	-
Cl. 5.2(Surface Characteristics)	-	250	-
Clause 9.4(Rebend Test)	-	400	-
Clause 6.3(Effective Cross-sectional Area)	-	250	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	500	-
Cl 9.4(Load In Other Direction From Bend)	-	400	-
Cl 9.3(Load In One Direction)	-	400	-
Cl 7.2(Weight)	-	250	-
Cl 6.1(Length, Width & Thickness)	-	400	-
Cl 5(Deformations and Surface Characteristics)	-	0	-
Cl 5(Deformations and Surface Characteristics)	-	0	-
Cl 6.1(Length, Width & Thickness)	-	400	-
Cl 7.2(Weight)	-	250	-
Cl 8.1(UTM)	-	2000	-
Cl 9.3(Load In One Direction)	-	400	-
Cl 9.4(Load In Other Direction From Bend)	-	400	-
13(Identification and marking)	-	300	-
5.7(Pull-out test - IS:2770(P1))	-	0	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	500	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	500	-
4.3(Rolling and cold working of bars/wire)	-	0	-
7.1(Specified length)	-	500	-
9.1(Preparation of test sample)	-	200	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	1100	-
9.5(Retest)	-	0	-
12(Inspection)	-	300	-
Cl 8.1(UTM)	-	2000	-
Cl 8.1(UTM)	-	2000	-
Cl 8.1(UTM)	-	2000	-
Cl 8.1(UTM)	-	2000	-
Cl 9.3(Load In One Direction)	-	400	-
Cl 7.2(Weight)	-	250	-
Cl 6.1(Length, Width & Thickness)	-	400	-
Cl 9.4(Load In Other Direction From Bend)	-	400	-
Cl 5(Deformations and Surface Characteristics)	-	0	-

04 Jun, 2028

-
-

TCR ENGINEERING SERVICES PVT.LTD., NAVI MUMBAI

7103506

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

As per table 2 ,3 & 4

7380 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	480	10 % Discount to BIS on total invoiced value
Cl 9.3(Load In One Direction)	-	420	10 % Discount to BIS on total invoiced value
Cl 8.1(UTM)	-	780	10 % Discount to BIS on total invoiced value
Cl 6.1(Length, Width & Thickness)	-	300	10 % Discount to BIS on total invoiced value
Cl 7.2(Weight)	-	300	10 % Discount to BIS on total invoiced value
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	300	10 % Discount to BIS on total invoiced value
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	300	10 % Discount to BIS on total invoiced value
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	300	10 % Discount to BIS on total invoiced value
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	300	10 % Discount to BIS on total invoiced value
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	300	10 % Discount to BIS on total invoiced value
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	300	10 % Discount to BIS on total invoiced value
Cl 5(Deformations and Surface Characteristics)	-	600	10 % Discount to BIS on total invoiced value
Cl. 4.3(Visual Inspection.)	-	300	10 % Discount to BIS on total invoiced value
4.3(Rolling and cold working of bars/wire)	-	300	10 % Discount to BIS on total invoiced value
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	10 % Discount to BIS on total invoiced value
4.2(Niobium (Nb))	-	300	10 % Discount to BIS on total invoiced value
4.1( Ti)	-	300	10 % Discount to BIS on total invoiced value

31 Dec, 2026

-
Exclusion : Pull out test, Clause 5.7

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

18000 View breakup
Without pull out test= Rs. 8500/- for pull out test only = Rs. 8500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.2 Table -2 (Nominal Mass)	-	400	Total testing charges are Rs. 18000/- including Pull Out test Testing charges for Pull Out test only Rs. 8000/-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	500	Testing charges for Freedom from defects are Rs. 200/-
Cl. 8.1 Table 3(Elongation, percentage)	-	500	NA
Cl. 8.1 Table 3(TS/YS ratio)	-	500	NA
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	700	NA
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	0	Testing charges already mentioned above at Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar) i.e. Rs. 700/-
Cl. 6.1(Nominal Size)	-	200	NA
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	300	Testing charges for Carbon content.
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	300	NA
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	300	NA
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	300	NA
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	300	NA
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	0	NA
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	0	NA
Cl 5(Deformations and Surface Characteristics)	-	0	Testing charges already mentioned above Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), i.e. Rs. 700/-
Cl 5(Deformations and Surface Characteristics)	-	0	Testing charges already mentioned above Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), i.e. Rs. 700/-
Cl 5(Deformations and Surface Characteristics)	-	0	Testing charges already mentioned above Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), i.e. Rs. 700/-
Cl. 8.1 Table 3(Yield Stress (YS))	-	500	NA
Cl. 9.3, Table 4(Bend Test )	-	500	NA
Clause 9.4(Rebend Test)	-	500	NA
Clause 6.3(Effective Cross-sectional Area)	-	500	NA
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	500	NA
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	0	Testing charges already mentioned above Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), i.e. Rs. 700/-
4.1(Ni)	-	300	NA
4.1(Mo)	-	300	NA
4.1(Cr)	-	300	NA
4.1( Ti)	-	300	NA
4.1(V)	-	300	NA
4.1( Nb)	-	300	NA
4.1( Copper %)	-	300	NA
4.2(Boron (B))	-	300	NA
4.1( Aluminium %)	-	300	NA
4.1(Sulphur and phosphorous)	-	0	NA
4.1(Silicon %)	-	300	NA
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	NA
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	NA
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	NA
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	0	NA
4.2(Niobium (Nb))	-	0	NA
5.7(Pull-out test - IS:2770(P1))	-	8000	NA

31 Dec, 2026

-
Pull Out test included w.e.f. 13.10.2023

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

All Type

15500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	500	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 8.1(UTM)	-	1000	-
Cl 7.2(Weight)	-	500	-
Cl 6.1(Length, Width & Thickness)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	200	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	500	-
Cl. 9.3, Table 4(Bend Test )	-	500	-
Cl. 8.1 Table 3(Elongation, percentage)	-	500	-
Cl. 8.1 Table 3(TS/YS ratio)	-	30	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	500	-
Cl. 7.2 Table -2 (Nominal Mass)	-	500	-
Cl. 6.1(Nominal Size)	-	500	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	1200	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	1200	-
8.18.1 Table 3(Total elongation at maximum force)	-	300	-
5.7(PullOut (Bond Test))	-	3500	-
Cl. 5.7(Average compressive strength of cubes at 28 days)	-	2500	-
Cl. 5.7(Bond Strength at 0.25 mm slip)	-	2500	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	500	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	500	-
Cl. 8.1 Table 3(Maximum Extension)	-	500	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	500	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	1000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	300	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	300	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	300	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	300	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	300	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	300	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	500	-
4.2(Niobium (Nb))	-	500	-
4.2(Boron (B))	-	500	-
4.1( Aluminium %)	-	500	-
4.1(Silicon %)	-	300	-
4.1( Ti)	-	500	-

-
-

AADCO TESTING & RESEARCH LABORATORY PVT LTD (F28), GHAZIABAD

8141606

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 8.1 Table 3(Tensile Strength (TS))	-	150	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	150	-
Cl. 8.1 Table 3(Elongation, percentage)	-	150	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	150	-
Cl. 7.2 Table -2 (Nominal Mass)	-	200	-
Cl. 9.3, Table 4(Bend Test )	-	300	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	300	-
Cl 5(Deformations and Surface Characteristics)	-	350	-
5.7(Pull-out test - IS:2770(P1))	-	5000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	250	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	250	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	250	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	250	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
4.2(Niobium (Nb))	-	250	-
4.2(Boron (B))	-	250	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	250	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	2000	-
Cl. 5.7(Bond Strength at 0.25 mm slip)	-	250	-
Cl. 8.1 Table 3(TS/YS ratio)	-	250	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	250	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	250	-
4.3(Rolling and cold working of bars/wire)	-	250	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	250	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	250	-
4.1( Aluminium %)	-	250	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	250	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	250	-

26 Jul, 2027

-
-

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Group 1-6

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	500	-
Cl 9.3(Load In One Direction)	-	500	-
Cl 7.2(Weight)	-	500	-
Cl 6.1(Length, Width & Thickness)	-	500	-
Cl 5(Deformations and Surface Characteristics)	-	500	-
Cl 8.1(UTM)	-	1500	-
4.1(Sulphur and phosphorous)	-	500	-
4.1(CE)	-	250	-
4.1( Nitrogen%)	-	500	-
4.1(Ni)	-	500	-
4.1(Mo)	-	500	-
4.1(Cr)	-	500	-
4.1( Ti)	-	500	-
4.1(V)	-	500	-
4.1( Nb)	-	500	-
4.1( Aluminium %)	-	500	-
4.1( Copper %)	-	500	-
4.1(Silicon %)	-	500	-
4.1(Sulphur %)	-	500	-
4.1(Phosphorus %)	-	500	-
4.1(Manganese %)	-	500	-
4.1(Carbon %)	-	500	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1000	-
Cl. 9.3, Table 4(Bend Test )	-	1000	-
Cl. 8.1 Table 3(Elongation, percentage)	-	500	-
Cl. 8.1 Table 3(TS/YS ratio)	-	250	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	1000	-
Cl. 7.2 Table -2 (Nominal Mass)	-	500	-
Cl. 6.1(Nominal Size)	-	250	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	250	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	250	-
8.18.1 Table 3(Total elongation at maximum force)	-	250	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	250	-
Cl. 4.3(Visual Inspection.)	-	250	-

15 Aug, 2028

-
Except- Pull out test

National Test House (NR) - NTH, Ghaziabad

8101304

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

24000 View breakup
i) Size 8-12mm: Rs.8000/- All test + Rs.10000/- for Pullout Test ii) Size 16-28mm: Rs.9000/- All test + Rs.15000/- for Pullout Test iii) Size 32mm: Rs.10000/- All test + Rs.15000/- for Pullout Test. [Additional fee Rs.2000/- for micro element]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	1000	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	0	-
Cl 7.2(Weight)	-	1000	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	1000	-
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	-
Cl. 8.1 Table 3(TS/YS ratio)	-	0	-
Cl. 9.3, Table 4(Bend Test )	-	1000	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	1000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	1000	-
Cl 5(Deformations and Surface Characteristics)	-	15000	-
4.1(Sulphur and phosphorous)	-	500	-
4.1(CE)	-	1000	-
4.1( Nitrogen%)	-	500	-
4.1(Ni)	-	500	-
4.1(Mo)	-	500	-
4.1(Cr)	-	500	-
4.1( Ti)	-	500	-
4.1(V)	-	500	-
4.1( Copper %)	-	500	-
4.1(Silicon %)	-	500	-
4.1(Sulphur %)	-	500	-
4.1(Phosphorus %)	-	500	-
4.1(Manganese %)	-	500	-
4.1(Carbon %)	-	500	-
4.1( Aluminium %)	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	500	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	500	-

26 Oct, 2028

-
-

MSME Testing Centre, New Delhi

8101204

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Upto 32mm

10756 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	3795	-
Cl 5(Deformations and Surface Characteristics)	-	2195	-
Cl 7.2(Weight)	-	520	-
Cl 8.1(UTM)	-	1444	Tensile Test
Cl 9.3(Load In One Direction)	-	1358	Bend Test
Cl 9.4(Load In Other Direction From Bend)	-	1444	Rebend Test

31 Dec, 2026

-
Cl 5.7 Pull out test

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

fe415,415d,415s,500,500d,500s,550,550d,600

38500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8.1(UTM)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl 9.3(Load In One Direction)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl 9.4(Load In Other Direction From Bend)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl 5(Deformations and Surface Characteristics)	-	6666.66	FOR BIS SAMPLES:15% DISCOUNT
Cl 6.1(Length, Width & Thickness)	-	0	FOR BIS SAMPLES:15% DISCOUNT
Cl 7.2(Weight)	-	0	FOR BIS SAMPLES:15% DISCOUNT
4.1(Sulphur and phosphorous)	-	0	FOR BIS SAMPLES:15% DISCOUNT
4.1(CE)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1( Nitrogen%)	-	2000	FOR BIS SAMPLES:15% DISCOUNT
4.1(Ni)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(Mo)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(Cr)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1( Ti)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(V)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1( Nb)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
4.1( Aluminium %)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1( Copper %)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(Silicon %)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(Sulphur %)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
4.1(Phosphorus %)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
4.1(Manganese %)	-	500	FOR BIS SAMPLES:15% DISCOUNT
4.1(Carbon %)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	500	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	0	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	500	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	2000	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl. 8.1 Table 3(Elongation, percentage)	-	1000	FOR BIS SAMPLES:15% DISCOUNT
Cl. 8.1 Table 3(TS/YS ratio)	-	0	FOR BIS SAMPLES:15% DISCOUNT
Cl. 8.1 Table 3(Tensile Strength (TS))	-	1500	FOR BIS SAMPLES:15% DISCOUNT
Cl. 8.1 Table 3(Yield Stress (YS))	-	1500	FOR BIS SAMPLES:15% DISCOUNT
Cl. 7.2 Table -2 (Nominal Mass)	-	0	FOR BIS SAMPLES:15% DISCOUNT
Cl. 6.1(Nominal Size)	-	0	FOR BIS SAMPLES:15% DISCOUNT
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	6666.66	FOR BIS SAMPLES:15% DISCOUNT
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	6666.66	FOR BIS SAMPLES:15% DISCOUNT

31 Dec, 2026

-
-

BIS, Central Laboratory (CL)

None

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

25780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Deformations and Surface Characteristics)	-
Cl 7.2 (Weight)	-
4.1 (Carbon %)	-
4.1 (Sulphur %)	-
4.1 (Phosphorus %)	-
4.1 (Manganese %)	-
4.1 ( Nitrogen%)	-
4.1 (Sulphur and phosphorous)	-
4.1 (CE)	-
Cl 5 (Deformations and Surface Characteristics)	-
Clause 8.1(Table 3) (Total Elongation at Maximum Force)	-
Cl. 8.1 Table 3 (TS/YS ratio)	-
Cl. 8.1 Table 3 (Elongation, percentage)	-
Cl. 8.1 Table 3 (Yield Stress (YS))	-
Cl.9.4 & Cl. 9.4.1 (Rebend test)	-
Cl. 9.3, Table 4 (Bend Test )	-
Cl. 8.1 Table 3 (Tensile Strength (TS))	-

-
Microalloying element/type of killing (element)/any other element to be declared; Excluding -; Pull out test,

BIS, Northern Regional Laboratory (NRL)

None

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

25780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7.2 (Weight)	-
Cl 9.4 (Load In Other Direction From Bend)	-
Cl 9.3 (Load In One Direction)	-
Cl 9.4 (Load In Other Direction From Bend)	-
Cl 5 (Deformations and Surface Characteristics)	-
4.1 (Carbon %)	-
4.1 (Sulphur %)	-
4.1 (Silicon %)	-
4.1 (Manganese %)	-
4.1 (Phosphorus %)	-
4.1 ( Nitrogen%)	-
4.1 (Sulphur and phosphorous)	-
4.1 (CE)	-
Cl. 8.1 Table 3 (Tensile Strength (TS))	-
Cl. 8.1 Table 3 (Yield Stress (YS))	-
Cl. 8.1 Table 3 (Elongation, percentage)	-
Cl. 8.1 Table 3 (TS/YS ratio)	-

-
Except Pull out test, Microalloying Elements

BIS, Southern Regional Laboratory (SRL)

None

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

25780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 9.4 (Load In Other Direction From Bend)	-
Cl 7.2 (Weight)	-
Cl 5 (Deformations and Surface Characteristics)	-
Cl 6.1 (Length, Width & Thickness)	-
Cl.9.4 & Cl. 9.4.1 (Rebend test)	-
Cl. 9.3, Table 4 (Bend Test )	-
Cl. 8.1 Table 3 (Elongation, percentage)	-
Cl. 8.1 Table 3 (TS/YS ratio)	-
Cl. 8.1 Table 3 (Tensile Strength (TS))	-
Cl. 8.1 Table 3 (Yield Stress (YS))	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-
Clause 4.2 Note 2, Amendment 1 & 3 (Nb+V+B+Ti)	-
Clause 4.2 Note 3, Amendment 1 & 3 (Cr+Cu+Ni+Mo+P)	-
Clause 4.2, Amendment 3 Note 4 ("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-
4.2 (Boron (B))	-
4.2 (Niobium (Nb))	-
4.1 (Carbon %)	-
4.1 (Manganese %)	-
4.1 (Phosphorus %)	-
4.1 (Silicon %)	-
4.1 (Sulphur %)	-
4.1 ( Copper %)	-
4.1 ( Aluminium %)	-
4.1 ( Nitrogen%)	-
4.1 ( Nb)	-
4.1 (V)	-
4.1 ( Ti)	-
4.1 (Cr)	-
4.1 (Mo)	-
4.1 (Ni)	-
4.1 (CE)	-
4.1 (Sulphur and phosphorous)	-

-
" 1 mtr x3pcS. Chemical facility is available. Excluding EXCEPT Pullout TEST, Bend and Rebend, 0.2 percent proof stress/ yield stress, Total elongation at maximum force, bar size restricted upto 20 mm for TENSILE TEST

BIS, Eastern Regional Laboratory (ERL)

None

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

For all grades except for the tests mentioned in remarks

25780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-
Cl 7.2 (Weight)	-
Cl. 8.1 Table 3 (Yield Stress (YS))	-
Cl. 8.1 Table 3 (Tensile Strength (TS))	-
Cl. 8.1 Table 3 (TS/YS ratio)	-
Cl. 8.1 Table 3 (Elongation, percentage)	-
4.1 (Sulphur and phosphorous)	-
Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-
Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-
Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-
Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-
Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-
Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-
Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-
Cl. 8.1 Table 3 (Elongation, percentage)	-
Cl. 9.3, Table 4 (Bend Test )	-
Cl.9.4 & Cl. 9.4.1 (Rebend test)	-
8.18.1 Table 3 (Total elongation at maximum force)	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
4.2 (Niobium (Nb))	-
4.2 (Boron (B))	-
4.1 ( Ti)	-
Clause 4.2 Note 3, Amendment 1 & 3 (Cr+Cu+Ni+Mo+P)	-
Clause 4.2 Note 2, Amendment 1 & 3 (Nb+V+B+Ti)	-

-
Mech - Facility not available for pull out test, total elongation at maximum force. Chem- Declarations to be provided regarding type of 'Killed' material/Micro-alloys/low-alloys/Nitrogen content or any other parameter to be analysed additionally

BIS, Patna Branch Laboratory (PBL)

None

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

25780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 5 (Deformations and Surface Characteristics)	-
Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-
Cl.9.4 & Cl. 9.4.1 (Rebend test)	-
Cl. 9.3, Table 4 (Bend Test )	-
Cl. 8.1 Table 3 (Elongation, percentage)	-
Cl. 8.1 Table 3 (TS/YS ratio)	-
Cl. 8.1 Table 3 (Tensile Strength (TS))	-
Cl. 8.1 Table 3 (Yield Stress (YS))	-
Cl. 7.2 Table -2 (Nominal Mass)	-
Cl. 6.1 (Nominal Size)	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-
Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-
Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-
Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-
Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-
Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-
Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-
Cl. 5.3 (a) (The ribs contributing the projected area - Longitudinal Ribs)	-
Cl. 5.3 (b) (The ribs contributing the projected area - Transverse Ribs)	-

-
All test facilities are available as per the IS except- i. Bond/Pull Out Test (Clause 5.7) ii. Total Elongation at Maximum Force (Clause 8.1 and Table 3) iii. Tensile Test of Sizes > 16mm (Clause 8.1 and Table 3) iv. Tests for microalloying elements (Ti, Nb, B, V), Cr, Mo, Cu, Ni and Al (Clause 4.2)

BIS, Western Regional Laboratory (WRL)

None

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

25780 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6.1 (Nominal Size)	-
Cl 7.2 (Weight)	-
Cl. 8.1 Table 3 (Elongation, percentage)	-
Cl. 8.1 Table 3 (TS/YS ratio)	-
Cl. 8.1 Table 3 (Tensile Strength (TS))	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-
Cl. 9.3, Table 4 (Bend Test )	-
Cl.9.4 & Cl. 9.4.1 (Rebend test)	-
4.1 (Silicon %)	-
4.1 (Sulphur %)	-
4.1 (Phosphorus %)	-
4.1 (Manganese %)	-
4.1 (Carbon %)	-
Cl. 8.1 Table 3 (Yield Stress (YS))	-
4.1 (Sulphur and phosphorous)	-

-
Test facilities are not available for the following: (1) Total elongation at maximum force, (2) Pull out test (Type test) (3) Sizes above 25 mm, (4) Micro-alloy/low alloys, Nb, V, B and Ti, Cr, Cu, Ni, Mo, Nirogen and nitrogen binding elements, like Nb, V, Ti, Al

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number