BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

61 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

Stellar Test House, Noida

8171606

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	200	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	500	-
Cl-7.2.3(Grain Direction)	-	500	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	100	-
Cl-8.1(Dimensions -length)	-	1000	-
Cl-8.2(Thickness of the plywood boards)	-	500	-
Cl-8.3(Squareness)	-	1000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1000	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-

26 Sep, 2028

-
Included w.e.f 08.05.2025 Exclusion: Cl-11.6 (Formaldehyde Content Test), Cl-11.7 (Steady-State Formaldehyde Emission Test)

Precision Laboratories LLP, Ahmedabad

7174106

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	3000	-
Cl-5.2, Table- 1 (i)(Blister)	-	3000	-
Cl-5.2, Table- 1 (ii)(Checks)	-	3000	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	3000	-
Cl-5.2, Table- 1 (iv)(Dote)	-	3000	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	3000	-
Cl-5.2, Table- 1 (vi)(Joints)	-	3000	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	3000	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	3000	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	3000	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	3000	-
Cl-5.2, Table- 1 (xi)(Patches)	-	3000	-
Cl-5.2, Table- 1 (xii)(Splits)	-	3000	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	3000	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	3000	-
Cl-6.1(Timber)	-	3000	-
Cl-6.2(Adhesive)	-	3000	-
Cl-7.2.1(Thickness of veneers)	-	3000	-
Cl-7.2.3(Grain Direction)	-	3000	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	3000	-
Cl-7.2.5.2(Splits)	-	3000	-
Cl-7.2.5.3(Overlap)	-	3000	-
Cl-8.1(Dimensions -length)	-	3000	-
Cl-8.2(Thickness of the plywood boards)	-	3000	-
Cl-8.3(Squareness)	-	3000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	3000	-
Cl-11.3.2(Mycological Test)	-	3000	-
Cl-11.4(Moisture Content)	-	3000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	3000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	3000	-
Cl-11.6(Formaldehyde Content Test)	-	3000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	3000	-
Cl-9(WORKMANSHIP AND FINISH)	-	3000	-
Cl-7.2.4(Scarf Joints)	-	3000	-
Cl-5.1(Classification by appearance)	-	3000	-
Cl-5.2, Table- 1 (i)(Blister)	-	3000	-
Cl-5.2, Table- 1 (ii)(Checks)	-	3000	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	3000	-
Cl-5.2, Table- 1 (iv)(Dote)	-	3000	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	3000	-
Cl-5.2, Table- 1 (vi)(Joints)	-	3000	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	3000	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	3000	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	3000	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	3000	-
Cl-5.2, Table- 1 (xi)(Patches)	-	3000	-
Cl-5.2, Table- 1 (xii)(Splits)	-	3000	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	3000	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	3000	-
Cl-6.1(Timber)	-	3000	-
Cl-6.2(Adhesive)	-	3000	-
Cl-7.2.1(Thickness of veneers)	-	3000	-
Cl-7.2.3(Grain Direction)	-	3000	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	3000	-
Cl-7.2.5.2(Splits)	-	3000	-
Cl-7.2.5.3(Overlap)	-	3000	-
Cl-8.1(Dimensions -length)	-	3000	-
Cl-8.2(Thickness of the plywood boards)	-	3000	-
Cl-8.3(Squareness)	-	3000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	3000	-
Cl-11.3.2(Mycological Test)	-	3000	-
Cl-11.4(Moisture Content)	-	3000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	3000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	3000	-
Cl-11.6(Formaldehyde Content Test)	-	3000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	3000	-
Cl-9(WORKMANSHIP AND FINISH)	-	3000	-
Cl-7.2.4(Scarf Joints)	-	3000	-

31 Oct, 2029

-
Included w.e.f 04.03.2025 Exclusion:Cl-11.7 (Steady-State Formaldehyde Emission Test)

CIPET, KOCHI

6137634

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

22759 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	225	25% discount on test charges
Cl-5.2, Table- 1 (i)(Blister)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (ii)(Checks)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (iv)(Dote)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (vi)(Joints)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (xi)(Patches)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (xii)(Splits)	-	0	Included in classification by appearance
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	Included in classification by appearance
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	Included in classification by appearance
Cl-6.1(Timber)	-	0	Included in classification by appearance
Cl-6.2(Adhesive)	-	0	Included in classification by appearance
Cl-7.2.1(Thickness of veneers)	-	0	Included in classification by appearance
Cl-7.2.3(Grain Direction)	-	0	Included in classification by appearance
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	Included in classification by appearance
Cl-7.2.5.2(Splits)	-	0	Included in classification by appearance
Cl-7.2.5.3(Overlap)	-	0	Included in classification by appearance
Cl-8.1(Dimensions -length)	-	375	25% discount on test charges
Cl-8.2(Thickness of the plywood boards)	-	187.5	25% discount on test charges
Cl-8.3(Squareness)	-	375	25% discount on test charges
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	2400	Specimen Preparation charges included and 25 % discount on test charges
Cl-11.3.2(Mycological Test)	-	3750	25% discount on test charges
Cl-11.4(Moisture Content)	-	675	25% discount on test charges
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	2650	Specimen Preparation charges included and 25 % discount on test charges
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	2650	Specimen Preparation charges included and 25 % discount on test charges
Cl-11.6(Formaldehyde Content Test)	-	2250	25% discount on test charges
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	3750	25% discount on test charges
Cl-9(WORKMANSHIP AND FINISH)	-	0	Included in classification by appearance
Cl-7.2.4(Scarf Joints)	-	0	Included in classification by appearance
Cl-5.1(Classification by appearance)	-	225	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	375	-
Cl-8.2(Thickness of the plywood boards)	-	187.5	-
Cl-8.3(Squareness)	-	375	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	2400	-
Cl-11.3.2(Mycological Test)	-	3750	-
Cl-11.4(Moisture Content)	-	375	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	2650	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	2650	-
Cl-11.6(Formaldehyde Content Test)	-	2250	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	3750	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-

31 Dec, 2026

-
Included w.e.f. 13.02.2025

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	1000	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	800	-
Cl-8.2(Thickness of the plywood boards)	-	800	-
Cl-8.3(Squareness)	-	400	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	500	-
Cl-11.3.2(Mycological Test)	-	500	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	500	-
Cl-9(WORKMANSHIP AND FINISH)	-	500	-
Cl-7.2.4(Scarf Joints)	-	0	-
Cl-11.6(Formaldehyde Content Test)	-	2000	-
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	0	-
Cl-8.2(Thickness of the plywood boards)	-	0	-
Cl-8.3(Squareness)	-	0	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	0	-
Cl-11.3.2(Mycological Test)	-	0	-
Cl-11.4(Moisture Content)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-
Cl-11.6(Formaldehyde Content Test)	-	0	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	0	Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	0	-
Cl-8.2(Thickness of the plywood boards)	-	0	-
Cl-8.3(Squareness)	-	0	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	0	-
Cl-11.3.2(Mycological Test)	-	0	-
Cl-11.4(Moisture Content)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-
Cl-11.6(Formaldehyde Content Test)	-	0	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	0	-
Cl-5.1(Classification by appearance)	-	-	-
Cl-5.2, Table- 1 (i)(Blister)	-	-	-
Cl-5.2, Table- 1 (ii)(Checks)	-	-	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	-	-
Cl-5.2, Table- 1 (iv)(Dote)	-	-	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	-	-
Cl-5.2, Table- 1 (vi)(Joints)	-	-	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	-	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	-	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	-	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	-	-
Cl-5.2, Table- 1 (xi)(Patches)	-	-	-
Cl-5.2, Table- 1 (xii)(Splits)	-	-	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	-	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	-	-
Cl-6.1(Timber)	-	-	-
Cl-6.2(Adhesive)	-	-	-
Cl-7.2.1(Thickness of veneers)	-	-	-
Cl-7.2.3(Grain Direction)	-	-	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	-	-
Cl-7.2.5.2(Splits)	-	-	-
Cl-7.2.5.3(Overlap)	-	-	-
Cl-8.1(Dimensions -length)	-	-	-
Cl-8.2(Thickness of the plywood boards)	-	-	-
Cl-8.3(Squareness)	-	-	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	-	-
Cl-11.3.2(Mycological Test)	-	-	-
Cl-11.4(Moisture Content)	-	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	-	-
Cl-9(WORKMANSHIP AND FINISH)	-	-	-
Cl-7.2.4(Scarf Joints)	-	-	-
Cl-11.6(Formaldehyde Content Test)	-	-	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	-	-

15 Aug, 2028

-
Included w.e.f. 25.03.2025 Exclusion: Cl-11.7 Steady-State Formaldehyde Emission Test

GUJARAT TEST HOUSE, AHMEDABAD

7109836

IS 303 (1989)

Plywood for General Purposes -

BWR/MR, AA/AB/BB

3050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Squareness - Annexure C)	-	20	Squareness
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	100	Quality requirement
5.1(Type - For AA Type)	-	40	AA
5.1(Type - For BB Type)	-	30	BB
5.1(Type - For AB Type)	-	30	AB
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	20	Thickness
8(Dimensions & Tolerances - Length - Cl. 8)	-	20	Length
8(Dimensions & Tolerances - Width - Cl. 8)	-	20	Width
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	20	Edge Straightness
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	50	Workmanship
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	50	Workmanship
11.3(Moisture Content - Part 1 of IS 1734)	-	150	Moisture contnent
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	250	MR
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	250	BWR
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1000	Mycological
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	125	MOR -Along-Avg.
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	125	MOR-Along-Min.
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	125	MOR-Across-Avg
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	125	MOR-Across-Min
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	125	MOE-Along-Avg
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	125	MOE-Along-Min
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	125	MOE-Across-Avg.
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	125	MOE-Across-Min

15 Jul, 2027

-
-

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

All Type

10450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	300	-
Cl-5.2, Table- 1 (i)(Blister)	-	300	-
Cl-5.2, Table- 1 (ii)(Checks)	-	300	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	300	-
Cl-5.2, Table- 1 (iv)(Dote)	-	300	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	300	-
Cl-5.2, Table- 1 (vi)(Joints)	-	300	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	300	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	300	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	300	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	300	-
Cl-5.2, Table- 1 (xi)(Patches)	-	300	-
Cl-5.2, Table- 1 (xii)(Splits)	-	300	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	300	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	300	-
Cl-6.1(Timber)	-	300	-
Cl-6.2(Adhesive)	-	300	-
Cl-7.2.1(Thickness of veneers)	-	300	-
Cl-7.2.3(Grain Direction)	-	300	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	300	-
Cl-7.2.5.2(Splits)	-	300	-
Cl-7.2.5.3(Overlap)	-	300	-
Cl-8.1(Dimensions -length)	-	700	-
Cl-8.2(Thickness of the plywood boards)	-	300	-
Cl-8.3(Squareness)	-	700	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1500	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-11.6(Formaldehyde Content Test)	-	2000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	2000	-
Cl-9(WORKMANSHIP AND FINISH)	-	300	-
Cl-7.2.4(Scarf Joints)	-	300	-
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	8500	-
Cl-7.2.1(Thickness of veneers)	-	300	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	200	-
Cl-8.1(Dimensions -length)	-	600	-
Cl-8.2(Thickness of the plywood boards)	-	300	-
Cl-8.3(Squareness)	-	750	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1500	-
Cl-11.4(Moisture Content)	-	750	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	750	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	750	-
Cl-11.6(Formaldehyde Content Test)	-	2500	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	2500	-
Cl-9(WORKMANSHIP AND FINISH)	-	500	-
Cl-7.2.4(Scarf Joints)	-	0	-

-
Included w.e.f 20.05.2025

Universal Testing and Research Centre (Division of Sustainable Stewardship Private Limited)

8169306

IS 303 (1989)

Plywood for General Purposes -

MR & BWR

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	300	10% Discount For BIS Sample
8(Dimensions & Tolerances - Width - Cl. 8)	-	300	10% Discount For BIS Sample
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	300	10% Discount For BIS Sample
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	300	10% Discount For BIS Sample
8(Dimensions & Tolerances - Squareness - Annexure C)	-	300	10% Discount For BIS Sample
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	200	10% Discount For BIS Sample
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	500	10% Discount For BIS Sample
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	500	10% Discount For BIS Sample
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	2000	10% Discount For BIS Sample
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1600	10% Discount For BIS Sample
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1600	10% Discount For BIS Sample
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1600	10% Discount For BIS Sample
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1600	10% Discount For BIS Sample
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1600	10% Discount For BIS Sample
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1600	10% Discount For BIS Sample
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1600	10% Discount For BIS Sample
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1600	10% Discount For BIS Sample
11.3(Moisture Content - Part 1 of IS 1734)	-	500	10% Discount For BIS Sample
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	0	ok
5.1(Type - For BB Type)	-	0	ok
5.1(Type - For AB Type)	-	0	ok
5.1(Type - For AA Type)	-	0	ok
4(Grade - For MR grade)	-	0	ok
4(Grade - For BWR grade)	-	0	ok
cl. 13.1(marking)	-	0	ok
cl. 13.2(marking)	-	0	ok

28 Nov, 2027

-
-

CHOKSI LABORATORIES LIMITED, INDORE

8136916

IS 303 (1989)

Plywood for General Purposes -

BWR AND MR/ AA TYPE/AB TYPE/BB TYPE

6300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	350	NA
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	350	NA
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	350	NA
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	350	NA
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	350	NA
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	350	NA
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	350	NA
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	350	NA
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	500	NA
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	500	NA
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	500	NA
11.3(Moisture Content - Part 1 of IS 1734)	-	350	NA
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	200	NA
8(Dimensions & Tolerances - Squareness - Annexure C)	-	200	NA
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	100	NA
8(Dimensions & Tolerances - Width - Cl. 8)	-	100	NA
8(Dimensions & Tolerances - Length - Cl. 8)	-	100	NA
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	100	NA
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	0	NA
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	250	NA
5.1(Type - For BB Type)	-	100	NA
5.1(Type - For AB Type)	-	100	NA
5.1(Type - For AA Type)	-	100	NA
4(Grade - For MR grade)	-	100	NA
4(Grade - For BWR grade)	-	100	NA
cl. 13.1(marking)	-	100	NA

31 Dec, 2026

-
-

BIS, Southern Regional Laboratory (SRL)

None

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Classification by appearance)	-
Cl-5.2, Table- 1 (i) (Blister)	-
Cl-5.2, Table- 1 (ii) (Checks)	-
Cl-5.2, Table- 1 (iii) (Discolouration)	-
Cl-7.2.1 (Thickness of veneers)	-
Cl-8.1 (Dimensions -length)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-5.2, Table- 1 (iv) (Dote)	-
Cl-5.2, Table- 1 (v) (Insect hole)	-
Cl-5.2, Table- 1 (vi) (Joints)	-
Cl-5.2, Table- 1 (vii) (Knots (dead))	-
Cl-5.2, Table- 1 (viii) (Pin knots (dead))	-
Cl-5.2, Table- 1 (ix) (Pin knots (live))	-
Cl-5.2, Table- 1 (x) (Knots (tight))	-
Cl-5.2, Table- 1 (xi) (Patches)	-
Cl-5.2, Table- 1 (xii) (Splits)	-
Cl-5.2, Table- 1 (xiii) (Swirl)	-
Cl-8.2 (Thickness of the plywood boards)	-
Cl.8, 8.3 & Annex C (Edge Squareness)	-
Cl.8, 8.3 & Annex C (Edge Straightness)	-
Cl-9 (WORKMANSHIP AND FINISH)	-
Cl-11.3.1, 11.3.1.1 (Water Resistance Test)	-
Cl-11.3.2 (Mycological Test)	-
Cl-11.4 (Moisture Content)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-11.5, Table-4, (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-13 (Marking)	-
Cl-11.6 (Formaldehyde Content Test)	-
Cl.8.1 (Dimensions -width)	-

-
Quantity Required: 2 Nos of Full Sheets Steady-state Formaldehyde emission (optional test) as per Cl.11.7

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

Plywood for General Purposes-Specification

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	500	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	2700	-
Cl-7.2.1(Thickness of veneers)	-	100	-
Cl-7.2.3(Grain Direction)	-	100	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	100	-
Cl-7.2.5.2(Splits)	-	100	-
Cl-7.2.5.3(Overlap)	-	100	-
Cl-8.1(Dimensions -length)	-	700	-
Cl-8.2(Thickness of the plywood boards)	-	700	-
Cl-8.3(Squareness)	-	600	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	5500	-
Cl-11.3.2(Mycological Test)	-	10000	-
Cl-11.4(Moisture Content)	-	1800	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	3000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	3000	-
Cl-11.6(Formaldehyde Content Test)	-	2000	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	0	-
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	0	-
Cl-8.2(Thickness of the plywood boards)	-	0	-
Cl-8.3(Squareness)	-	0	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	0	-
Cl-11.3.2(Mycological Test)	-	0	-
Cl-11.4(Moisture Content)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.6(Formaldehyde Content Test)	-	0	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	500	-
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	0	-
Cl-8.2(Thickness of the plywood boards)	-	0	-
Cl-8.3(Squareness)	-	0	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	0	-
Cl-11.3.2(Mycological Test)	-	0	-
Cl-11.4(Moisture Content)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.6(Formaldehyde Content Test)	-	0	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	0	-
Cl-8.2(Thickness of the plywood boards)	-	0	-
Cl-8.3(Squareness)	-	0	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	0	-
Cl-11.3.2(Mycological Test)	-	0	-
Cl-11.4(Moisture Content)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.6(Formaldehyde Content Test)	-	0	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	0	-
Cl-9(WORKMANSHIP AND FINISH)	-	0	-
Cl-7.2.4(Scarf Joints)	-	0	-

-
Included w.e.f.19.05.2025

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

All Grade / Type / Size / Designation etc.

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (i)(Blister)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (ii)(Checks)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (iv)(Dote)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (vi)(Joints)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (xi)(Patches)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (xii)(Splits)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-6.1(Timber)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-6.2(Adhesive)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2.1(Thickness of veneers)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2.3(Grain Direction)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2.5.2(Splits)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2.5.3(Overlap)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.1(Dimensions -length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.2(Thickness of the plywood boards)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.3(Squareness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.3.2(Mycological Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.4(Moisture Content)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.6(Formaldehyde Content Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f 27.11.2024

INDIAN TEST HOUSE PRIVATE LIMITED, MURADNAGAR

8183336

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR/BWR/BWP/E1/E2

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	500	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	500	-
Cl-8.2(Thickness of the plywood boards)	-	500	-
Cl-8.3(Squareness)	-	500	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	-
Cl-11.3.2(Mycological Test)	-	1000	-
Cl-11.4(Moisture Content)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	1500	-

30 Dec, 2027

-
Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

DELHI TEST HOUSE, Azadhpur

8131406

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

ALL

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.2, Table- 1 (i)(Blister)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (ii)(Checks)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (iv)(Dote)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (v)(Insect hole)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (vi)(Joints)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (xi)(Patches)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (xii)(Splits)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	100	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	100	TESTING CHARGES - Rs.29000/-
Cl-8.1(Dimensions -length)	-	1000	TESTING CHARGES - Rs.29000/-
Cl-8.2(Thickness of the plywood boards)	-	1000	TESTING CHARGES - Rs.29000/-
Cl-8.3(Squareness)	-	1000	TESTING CHARGES - Rs.29000/-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	5000	TESTING CHARGES - Rs.29000/-
Cl-11.3.2(Mycological Test)	-	10000	TESTING CHARGES - Rs.29000/-
Cl-11.4(Moisture Content)	-	2000	TESTING CHARGES - Rs.29000/-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	3000	TESTING CHARGES - Rs.29000/-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	3000	TESTING CHARGES - Rs.29000/-
Cl-11.6(Formaldehyde Content Test)	-	1500	TESTING CHARGES - Rs.29000/-
Cl-5.1(Classification by appearance)	-	500	TESTING CHARGES - Rs.29000/-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	100	TESTING CHARGES - Rs.29000/-

17 Jun, 2027

-
Included w.e.f 15.10.2024 Excluding Cl-11.7 (Steady-State Formaldehyde Emission Test)

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

8000 View breakup
-

Clause No.	Exclusion	Remark
Cl-5.1(Classification by appearance)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (i)(Blister)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (ii)(Checks)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (iv)(Dote)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (v)(Insect hole)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (vi)(Joints)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (xi)(Patches)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (xii)(Splits)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-6.1(Timber)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-6.2(Adhesive)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-7.2.1(Thickness of veneers)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-7.2.3(Grain Direction)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-7.2.5.2(Splits)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-7.2.5.3(Overlap)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-8.1(Dimensions -length)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-8.2(Thickness of the plywood boards)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-8.3(Squareness)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-11.3.2(Mycological Test)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-11.4(Moisture Content)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-11.6(Formaldehyde Content Test)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	For BWR Grade - Rs. 8,000/- BWP Grade – Rs. 7000/- MR Grade – Rs. 6,500/-
Cl-5.1(Classification by appearance)	-	-
Cl-5.2, Table- 1 (i)(Blister)	-	-
Cl-5.2, Table- 1 (ii)(Checks)	-	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	-
Cl-5.2, Table- 1 (iv)(Dote)	-	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	-
Cl-5.2, Table- 1 (vi)(Joints)	-	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	-
Cl-5.2, Table- 1 (xi)(Patches)	-	-
Cl-5.2, Table- 1 (xii)(Splits)	-	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	-
Cl-6.1(Timber)	-	-
Cl-6.2(Adhesive)	-	-
Cl-7.2.1(Thickness of veneers)	-	-
Cl-7.2.3(Grain Direction)	-	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	-
Cl-7.2.5.2(Splits)	-	-
Cl-7.2.5.3(Overlap)	-	-
Cl-8.1(Dimensions -length)	-	-
Cl-8.2(Thickness of the plywood boards)	-	-
Cl-8.3(Squareness)	-	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	-
Cl-11.3.2(Mycological Test)	-	-
Cl-11.4(Moisture Content)	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	-
Cl-11.6(Formaldehyde Content Test)	-	-
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	-

-
Included w.e.f 08.10.2024 Exclusion: Cl.11.7 (Steady-State Formaldehyde Emission Test)

Elutech Laboratory and Calibration Services, Jaipur

9179806

IS 303 (1989)

Plywood for General Purposes -

Grade - MR & BWR, Type – AA, AB & BB

5200 View breakup
Testing charges (excluding raw material) for BMR grade Rs. 4800/-, MR grade Rs. 5200/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	5200	Testing Charges (excluding raw material) for BWR Grade Rs 4800, MR Grade Rs 5200.
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	5200	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	5200	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	5200	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	5200	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	5200	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	5200	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	5200	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	5200	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	5200	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	5200	-
11.3(Moisture Content - Part 1 of IS 1734)	-	5200	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	5200	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	5200	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	5200	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	5200	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	5200	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	5200	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	5200	-
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	5200	-
5.1(Type - For BB Type)	-	5200	-
5.1(Type - For AB Type)	-	5200	-
5.1(Type - For AA Type)	-	5200	-
4(Grade - For MR grade)	-	5200	-
4(Grade - For BWR grade)	-	5200	-
cl. 13.1(marking)	-	5200	-
cl. 13.2(marking)	-	5200	-
Cl-12 (Amendment No-2 OF IS 303)(OPTIONAL REQUIREMENT FOR ECO MARK)	-	5200	-
cl. 13.1(marking)	-	0	-
cl. 13.2(marking)	-	0	-
Cl-12 (Amendment No-2 OF IS 303)(OPTIONAL REQUIREMENT FOR ECO MARK)	-	0	-
cl. 13.1(marking)	-	0	-
cl. 13.2(marking)	-	0	-
Cl-12 (Amendment No-2 OF IS 303)(OPTIONAL REQUIREMENT FOR ECO MARK)	-	0	-
cl. 13.1(marking)	-	0	-
cl. 13.2(marking)	-	0	-
Cl-12 (Amendment No-2 OF IS 303)(OPTIONAL REQUIREMENT FOR ECO MARK)	-	0	-
CL-6.2(Adhesive)	-	5200	-
CL-7.2.3(Grain Direction)	-	5200	-
CL-7.2.1(Thickness)	-	5200	-
CL-7.2.5.1(Gaps in cores and cross-bands)	-	5200	-
CL-8.2(Thickness)	-	5200	-

26 Aug, 2027

-
Included w.e.f. 19.09.2024

ALPHA TEST HOUSE SERVICES LLP (Unit-1), MOHALI

9184906

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

Plywood

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	15000	GST excluded
Cl-5.2, Table- 1 (i)(Blister)	-	15000	GST excluded
Cl-5.2, Table- 1 (ii)(Checks)	-	15000	GST excluded
Cl-5.2, Table- 1 (iii)(Discolouration)	-	15000	GST excluded
Cl-5.2, Table- 1 (iv)(Dote)	-	15000	GST excluded
Cl-5.2, Table- 1 (v)(Insect hole)	-	15000	GST excluded
Cl-5.2, Table- 1 (vi)(Joints)	-	15000	GST excluded
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	15000	GST excluded
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	15000	GST excluded
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	15000	GST excluded
Cl-5.2, Table- 1 (x)(Knots (tight))	-	15000	GST excluded
Cl-5.2, Table- 1 (xi)(Patches)	-	15000	GST excluded
Cl-5.2, Table- 1 (xii)(Splits)	-	15000	GST excluded
Cl-5.2, Table- 1 (xiii)(Swirl)	-	15000	GST excluded
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	15000	GST excluded
Cl-6.1(Timber)	-	15000	GST excluded
Cl-6.2(Adhesive)	-	15000	GST excluded
Cl-7.2.1(Thickness of veneers)	-	15000	GST excluded
Cl-7.2.3(Grain Direction)	-	15000	GST excluded
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	15000	GST excluded
Cl-7.2.5.2(Splits)	-	15000	GST excluded
Cl-7.2.5.3(Overlap)	-	15000	GST excluded
Cl-8.1(Dimensions -length)	-	15000	GST excluded
Cl-8.2(Thickness of the plywood boards)	-	15000	GST excluded
Cl-8.3(Squareness)	-	15000	GST excluded
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	15000	GST excluded
Cl-11.3.2(Mycological Test)	-	15000	GST excluded
Cl-11.4(Moisture Content)	-	15000	GST excluded
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	15000	GST excluded
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	15000	GST excluded
Cl-11.6(Formaldehyde Content Test)	-	15000	GST excluded
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	15000	GST excluded
Cl-9(WORKMANSHIP AND FINISH)	-	15000	GST excluded
Cl-7.2.4(Scarf Joints)	-	15000	GST excluded

25 Apr, 2028

-
Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

CIPET, KOCHI

6137634

IS 303 (1989)

Plywood for General Purposes -

13287.5 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	800	Visual Appearance, length & width
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	250	Thickness
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	Squareness & edge Straightness
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	2600	Water resistance test (Including Specimen preparation)
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	5000	Mycological test
11.3(Moisture Content - Part 1 of IS 1734)	-	900	Moisture Content
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	6400	Static Bending Strength - MOE& MOR (Along Face Grain & Across face grain

31 Dec, 2026

-
Thickness: 3 mm to 19 mm

AANKAN CALIBRATION AND TESTING CENTRE LLP, DANTLI

7184406

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

GRADE:MR/BWR/BWP,TYPE AA/AB/BB,t:max 25 mm,Class:E1/E2

8100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	100	ok
Cl-5.2, Table- 1 (i)(Blister)	-	100	ok
Cl-5.2, Table- 1 (ii)(Checks)	-	100	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	100	-
Cl-5.2, Table- 1 (iv)(Dote)	-	100	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	100	-
Cl-5.2, Table- 1 (vi)(Joints)	-	100	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	100	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	100	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	100	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	100	-
Cl-5.2, Table- 1 (xi)(Patches)	-	100	-
Cl-5.2, Table- 1 (xii)(Splits)	-	100	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	100	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	100	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	4000	ok
Cl-7.2.1(Thickness of veneers)	-	300	ok
Cl-7.2.3(Grain Direction)	-	0	ok
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	ok
Cl-7.2.5.2(Splits)	-	0	ok
Cl-7.2.5.3(Overlap)	-	0	ok
Cl-8.1(Dimensions -length)	-	300	ok
Cl-8.2(Thickness of the plywood boards)	-	300	0k
Cl-8.3(Squareness)	-	300	0k
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	ok
Cl-11.3.2(Mycological Test)	-	1500	ok
Cl-11.4(Moisture Content)	-	750	ok
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	3000	OK
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	0	OK

-
Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

BIS, Northern Regional Laboratory (NRL)

None

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Classification by appearance)	-
Cl-8.1 (Dimensions -length)	-
Cl-8.2 (Thickness of the plywood boards)	-
Cl-8.3 (Squareness)	-
Cl-11.3.1, 11.3.1.1 (Water Resistance Test)	-
Cl-11.3.2 (Mycological Test)	-
Cl-11.4 (Moisture Content)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9 (WORKMANSHIP AND FINISH)	-
Cl-11.6 (Formaldehyde Content Test)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-11.5, Table-4, (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-13 (Marking)	-
Cl.8.1 (Dimensions -width)	-
Cl-5.2, Table-2 (Maximum Number of Categories of Permissible Defects, per m2)	-
Cl-8.3 (Edge Straightness)	-

-
Excluding Steady State Formaldehyde Emission Test (Cl. 11.7)

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

MR/BWR/BWP

14400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	0	Testing charges-8900 (MR)/10600 (BWR)/11100 (BWP) 20% discount to BIS GSTIN as per govt rule.
Cl-5.2, Table- 1 (i)(Blister)	-	400	Clause 5.2, Table 1-Testing charges-400
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	Separate testing charges as per BIS scope of Testing
Cl-7.2.1(Thickness of veneers)	-	0	Separate testing charges-400
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	200	-
Cl-8.2(Thickness of the plywood boards)	-	200	-
Cl-8.3(Squareness)	-	200	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	6300	Testing charges-800 (MR)/2500 (BWR)/3000 (BWP)
Cl-11.3.2(Mycological Test)	-	2500	-
Cl-11.4(Moisture Content)	-	600	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
Cl-11.6(Formaldehyde Content Test)	-	2000	-
Cl-5.1(Classification by appearance)	-	0	-
Cl-5.2, Table- 1 (i)(Blister)	-	0	-
Cl-5.2, Table- 1 (ii)(Checks)	-	0	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	-
Cl-5.2, Table- 1 (iv)(Dote)	-	0	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	-
Cl-5.2, Table- 1 (vi)(Joints)	-	0	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	-
Cl-5.2, Table- 1 (xi)(Patches)	-	0	-
Cl-5.2, Table- 1 (xii)(Splits)	-	0	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	0	-
Cl-6.1(Timber)	-	0	-
Cl-6.2(Adhesive)	-	0	-
Cl-7.2.1(Thickness of veneers)	-	0	-
Cl-7.2.3(Grain Direction)	-	0	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	-
Cl-7.2.5.2(Splits)	-	0	-
Cl-7.2.5.3(Overlap)	-	0	-
Cl-8.1(Dimensions -length)	-	0	-
Cl-8.2(Thickness of the plywood boards)	-	0	-
Cl-8.3(Squareness)	-	0	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	0	-
Cl-11.3.2(Mycological Test)	-	0	-
Cl-11.4(Moisture Content)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
Cl-11.6(Formaldehyde Content Test)	-	0	-

12 Sep, 2028

-
Included w.e.f. 25.09.2024 Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test)

Unique Test House LLP

9134536

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

GRADE-MR/BWR/BWP/ TYPE- AA/AB/BB/ SIZE- ALL SIZES

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	500	-
Cl-5.2, Table- 1 (i)(Blister)	-	100	-
Cl-5.2, Table- 1 (ii)(Checks)	-	100	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	100	-
Cl-5.2, Table- 1 (iv)(Dote)	-	100	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	100	-
Cl-5.2, Table- 1 (vi)(Joints)	-	100	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	100	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	100	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	100	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	100	-
Cl-5.2, Table- 1 (xi)(Patches)	-	100	-
Cl-5.2, Table- 1 (xii)(Splits)	-	100	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	100	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	100	-
Cl-6.1(Timber)	-	5000	for Face Veneer and Core Veneer Only
Cl-6.2(Adhesive)	-	9000	Grade -MR- 8500, Grade -BWR-9000, Grade -BWP-9500/-
Cl-7.2.1(Thickness of veneers)	-	100	-
Cl-7.2.3(Grain Direction)	-	100	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	100	-
Cl-7.2.5.2(Splits)	-	100	-
Cl-7.2.5.3(Overlap)	-	100	-
Cl-8.1(Dimensions -length)	-	250	-
Cl-8.2(Thickness of the plywood boards)	-	250	-
Cl-8.3(Squareness)	-	250	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	2000	-
Cl-11.3.2(Mycological Test)	-	2000	-
Cl-11.4(Moisture Content)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	2500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	2500	-
Cl-11.6(Formaldehyde Content Test)	-	2000	-
Cl-5.1(Classification by appearance)	-	200	-
Cl-5.2, Table- 1 (i)(Blister)	-	200	-
Cl-5.2, Table- 1 (ii)(Checks)	-	200	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	-
Cl-5.2, Table- 1 (iv)(Dote)	-	200	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	-
Cl-5.2, Table- 1 (vi)(Joints)	-	200	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	-
Cl-5.2, Table- 1 (xi)(Patches)	-	200	-
Cl-5.2, Table- 1 (xii)(Splits)	-	200	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	200	-
Cl-6.1(Timber)	-	200	-
Cl-6.2(Adhesive)	-	8500	-
Cl-7.2.1(Thickness of veneers)	-	200	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	200	-
Cl-8.1(Dimensions -length)	-	200	-
Cl-8.2(Thickness of the plywood boards)	-	200	-
Cl-8.3(Squareness)	-	2000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	2000	-
Cl-11.3.2(Mycological Test)	-	2000	-
Cl-11.4(Moisture Content)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	500	-
Cl-11.6(Formaldehyde Content Test)	-	3000	-
Cl-5.1(Classification by appearance)	-	500	-
Cl-5.2, Table- 1 (i)(Blister)	-	500	-
Cl-5.2, Table- 1 (ii)(Checks)	-	500	-
Cl-5.2, Table- 1 (iii)(Discolouration)	-	500	-
Cl-5.2, Table- 1 (iv)(Dote)	-	500	-
Cl-5.2, Table- 1 (v)(Insect hole)	-	500	-
Cl-5.2, Table- 1 (vi)(Joints)	-	500	-
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	500	-
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	500	-
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	500	-
Cl-5.2, Table- 1 (x)(Knots (tight))	-	500	-
Cl-5.2, Table- 1 (xi)(Patches)	-	500	-
Cl-5.2, Table- 1 (xii)(Splits)	-	500	-
Cl-5.2, Table- 1 (xiii)(Swirl)	-	500	-
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	500	-
Cl-6.1(Timber)	-	500	-
Cl-6.2(Adhesive)	-	9500	-
Cl-7.2.1(Thickness of veneers)	-	200	-
Cl-7.2.3(Grain Direction)	-	200	-
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	-
Cl-7.2.5.2(Splits)	-	200	-
Cl-7.2.5.3(Overlap)	-	200	-
Cl-8.1(Dimensions -length)	-	200	-
Cl-8.2(Thickness of the plywood boards)	-	200	-
Cl-8.3(Squareness)	-	2000	-
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1500	-
Cl-11.3.2(Mycological Test)	-	1500	-
Cl-11.4(Moisture Content)	-	1000	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1500	-
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1500	-
Cl-11.6(Formaldehyde Content Test)	-	3000	-

07 Sep, 2028

-
Included w.e.f. 30.10.2024 Exclusion Cl-11.7 (Steady-State Formaldehyde Emission Test)

Elutech Laboratory and Calibration Services, Jaipur

9179806

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

Grade - MR, BWR & BWP, Type – AA, AB & BB. E1 & E2

9100 View breakup
For BWR Grade - Rs. 9,100/- BWP Grade – Rs. 8,900/- MR Grade – Rs. 6,900/- (Excluding Raw Materials Testing) 10 % discount to BIS.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	300	Testing Charges (excluding raw material) for BWR Grade Rs 9100, BWP Grade Rs 8900, MR Grade Rs 6900.
Cl-5.2, Table- 1 (i)(Blister)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (ii)(Checks)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (iii)(Discolouration)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (iv)(Dote)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (v)(Insect hole)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (vi)(Joints)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (x)(Knots (tight))	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (xi)(Patches)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (xii)(Splits)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table- 1 (xiii)(Swirl)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	300	10 % discount to BIS GSTIN extra as per Government Rule
Cl-8.1(Dimensions -length)	-	100	10 % discount to BIS GSTIN extra as per Government Rule
Cl-8.2(Thickness of the plywood boards)	-	100	10 % discount to BIS GSTIN extra as per Government Rule
Cl-8.3(Squareness)	-	200	10 % discount to BIS GSTIN extra as per Government Rule
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	3000	3000 for BWR Grade, 2800 for BWP Grade, 800 for MR Grade.10 % discount to BIS
Cl-11.3.2(Mycological Test)	-	1900	10 % discount to BIS GSTIN extra as per Government Rule
Cl-11.4(Moisture Content)	-	400	10 % discount to BIS GSTIN extra as per Government Rule
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	500	10 % discount to BIS GSTIN extra as per Government Rule
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	500	10 % discount to BIS GSTIN extra as per Government Rule
Cl-11.6(Formaldehyde Content Test)	-	2000	10 % discount to BIS GSTIN extra as per Government Rule
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	0	Optional Test as per cl 11.7 of IS 303: 2024
Cl-6.1(Timber)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-6.2(Adhesive)	-	7800	Resin testing charges extra from IS 303 for BWP Grade Rs 7800, BWR Rs 7800 and MR Rs 7000
Cl-7.2.1(Thickness of veneers)	-	500	Rs 100 for thickness of veneer and Rs 400 for moisture of veneer
Cl-7.2.3(Grain Direction)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-7.2.5.2(Splits)	-	0	10 % discount to BIS GSTIN extra as per Government Rule
Cl-7.2.5.3(Overlap)	-	0	10 % discount to BIS GSTIN extra as per Government Rule

26 Aug, 2027

-
Exclusion: Cl-11.7 (Steady-State Formaldehyde Emission Test) Optional Test as per cl 11.7 of IS 303: 2024

NAWaL Analytical Labs India Private Limited, Hosur

6126416

IS 303 (1989)

Plywood for General Purposes -

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1000	+18 % GST Extra
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	+18 % GST Extra
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	+18 % GST Extra
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1000	+18 % GST Extra
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	+18 % GST Extra
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1000	+18 % GST Extra
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	+18 % GST Extra
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	+18 % GST Extra
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1000	+18 % GST Extra
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	500	+18 % GST Extra
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	500	+18 % GST Extra
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	+18 % GST Extra
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	100	+18 % GST Extra
8(Dimensions & Tolerances - Squareness - Annexure C)	-	100	+18 % GST Extra
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	100	+18 % GST Extra
8(Dimensions & Tolerances - Width - Cl. 8)	-	100	+18 % GST Extra
8(Dimensions & Tolerances - Length - Cl. 8)	-	100	+18 % GST Extra

21 Mar, 2028

-
Included w.e.f 22.01.2025 Exclusion : Cl-12 (Amendment No-2 OF IS 303) (OPTIONAL REQUIREMENT FOR ECO MARK)

Bharat Test House Pvt. Ltd. 1668 Sonipat

9168306

IS 303 (1989)

Plywood for General Purposes -

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	500	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	500	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	500	-
11.3(Moisture Content - Part 1 of IS 1734)	-	500	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	500	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	500	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	500	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	500	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	100	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	100	-
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	100	-
5.1(Type - For BB Type)	-	100	-
5.1(Type - For AB Type)	-	100	-
5.1(Type - For AA Type)	-	100	-
4(Grade - For MR grade)	-	100	-
4(Grade - For BWR grade)	-	100	-
cl. 13.1(marking)	-	100	-
cl. 13.2(marking)	-	100	-

-
Included w.e.f 12.12.2024

Delta Testing and Research Laboratories Private Limited (C5)

9179506

IS 303 (1989)

Plywood for General Purposes -

BWR & MR Grade

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	750	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Squareness - Annexure C)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Width - Cl. 8)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Dimensions & Tolerances - Length - Cl. 8)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Type - For BB Type)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Type - For AB Type)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Type - For AA Type)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Grade - For MR grade)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4(Grade - For BWR grade)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
cl. 13.1(marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
cl. 13.2(marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 303 (1989)

Plywood for General Purposes -

BWR and MR

7800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	200	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	200	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	200	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	200	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	200	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	200	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	200	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	200	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1500	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1000	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	1200	-
11.3(Moisture Content - Part 1 of IS 1734)	-	500	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	200	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	100	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	100	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	100	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	100	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	100	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	100	-
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	500	-
5.1(Type - For BB Type)	-	100	-
5.1(Type - For AB Type)	-	100	-
5.1(Type - For AA Type)	-	100	-
4(Grade - For MR grade)	-	100	-
4(Grade - For BWR grade)	-	100	-
cl. 13.1(marking)	-	100	-
cl. 13.2(marking)	-	100	-
cl. 13.1(marking)	-	0	-
cl. 13.2(marking)	-	0	-
Cl-12 (Amendment No-2 OF IS 303)(OPTIONAL REQUIREMENT FOR ECO MARK)	-	0	-
cl. 13.1(marking)	-	0	-
cl. 13.2(marking)	-	0	-
Cl-12 (Amendment No-2 OF IS 303)(OPTIONAL REQUIREMENT FOR ECO MARK)	-	0	-
cl. 13.1(marking)	-	0	-
cl. 13.2(marking)	-	0	-
Cl-12 (Amendment No-2 OF IS 303)(OPTIONAL REQUIREMENT FOR ECO MARK)	-	0	-

15 Aug, 2028

-
Included w.e.f. 24.07.2024

WELL TECH TEST AND RESEARCH CENTER, DERABASSI

9177306

IS 303 (1989)

Plywood for General Purposes -

MR/BWR

4750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	4750	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	4750	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	4750	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	4750	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	4750	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	4750	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	4750	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	4750	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	4750	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	4750	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	4750	-
11.3(Moisture Content - Part 1 of IS 1734)	-	4750	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	4750	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	4750	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	4750	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	4750	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	4750	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	4750	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	4750	-
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	4750	-

30 Mar, 2027

-
-

Hindustaan Testing Solutions LLP, Ambala

9122136

IS 303 (1989)

Plywood for General Purposes -

MR-BWR

5400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Grade - For BWR grade)	-	0	For MR Grade-4900 & BWR Grade-5400 20% discount to BIS GSTIN extra as per govt rule
4(Grade - For MR grade)	-	0	20% discount to BIS GSTIN extra as per govt rule
5.1(Type - For AA Type)	-	0	20% discount to BIS GSTIN extra as per govt rule
5.1(Type - For AB Type)	-	0	20% discount to BIS GSTIN extra as per govt rule
5.1(Type - For BB Type)	-	0	20% discount to BIS GSTIN extra as per govt rule
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	300	20% discount to BIS GSTIN extra as per govt rule
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	50	20% discount to BIS GSTIN extra as per govt rule
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	50	20% discount to BIS GSTIN extra as per govt rule
8(Dimensions & Tolerances - Length - Cl. 8)	-	50	20% discount to BIS GSTIN extra as per govt rule
8(Dimensions & Tolerances - Width - Cl. 8)	-	50	20% discount to BIS GSTIN extra as per govt rule
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	100	20% discount to BIS GSTIN extra as per govt rule
8(Dimensions & Tolerances - Squareness - Annexure C)	-	100	20% discount to BIS GSTIN extra as per govt rule
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	100	20% discount to BIS GSTIN extra as per govt rule
11.3(Moisture Content - Part 1 of IS 1734)	-	400	20% discount to BIS GSTIN extra as per govt rule
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	3200	20% discount to BIS GSTIN extra as per govt rule
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	800	20% discount to BIS GSTIN extra as per govt rule
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1900	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	100	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	150	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	100	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	150	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	100	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	150	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	100	20% discount to BIS GSTIN extra as per govt rule
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	150	20% discount to BIS GSTIN extra as per govt rule
cl. 13.1(marking)	-	0	20% discount to BIS GSTIN extra as per govt rule
cl. 13.2(marking)	-	0	20% discount to BIS GSTIN extra as per govt rule

12 Sep, 2028

-
-

National Test House (NR) - NTH, Ghaziabad

8101304

IS 303 (1989)

Plywood for General Purposes -

Grade BWR/Type AA/AB/BB

13000 View breakup
For BIS samples: BIS approved testing charges, for others: Rs.13000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	0	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	750	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	0	-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	750	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	0	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	750	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	0	-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	750	-
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	1500	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	3000	-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	3000	-
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	500	-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	500	-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	500	-
8(Dimensions & Tolerances - Width - Cl. 8)	-	500	-
8(Dimensions & Tolerances - Length - Cl. 8)	-	500	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	0	-
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	0	-
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	1000	-
5.1(Type - For BB Type)	-	0	-
5.1(Type - For AB Type)	-	0	-
5.1(Type - For AA Type)	-	0	-
4(Grade - For MR grade)	-	0	-
4(Grade - For BWR grade)	-	0	-

-
-

DELHI TEST HOUSE, Azadhpur

8131406

IS 303 (1989)

Plywood for General Purposes -

7000 View breakup
For BIS samples: 1.5 times of BIS testing charges, For others:

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	100	For BIS samples: 1.5 times of BIS testing charges
8(Dimensions & Tolerances - Width - Cl. 8)	-	100	For BIS samples: 1.5 times of BIS testing charges
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	100	For BIS samples: 1.5 times of BIS testing charges
8(Dimensions & Tolerances - Squareness - Annexure C)	-	100	For BIS samples: 1.5 times of BIS testing charges
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	100	For BIS samples: 1.5 times of BIS testing charges
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	250	For BIS samples: 1.5 times of BIS testing charges
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	2000	For BIS samples: 1.5 times of BIS testing charges
11.3(Moisture Content - Part 1 of IS 1734)	-	1000	For BIS samples: 1.5 times of BIS testing charges
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	500	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	0	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	0	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	0	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	1000	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	0	For BIS samples: 1.5 times of BIS testing charges
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	1000	For BIS samples: 1.5 times of BIS testing charges

17 Jun, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number