BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

143 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

ALL

15300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	450	Testing Charges for Conductor sizes upto and including 100 sq mm are Rs. 15,300/- & for sizes above 100 sq mm are Rs. 59,850/-
Cl-6.1.1(chemical composition of high carbon steel)	-	450	-
Cl-6.2(zinc used for galvanizing)	-	450	-
Cl-7(Freedom From Defects)	-	450	-
Cl-8.1(Wires-Nominal Sizes)	-	900	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	450	-
Cl-9.1(Joint in Wires)	-	450	-
Cl-9.2(Aluminium Wires)	-	450	-
Cl-9.3(Galvanized Steel Wires)	-	450	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	900	-
Cl-13.3(Conductor- Visual examination)	-	450	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	900	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	4500	-
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	18000	-
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	18000	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	450	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	1350	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	1350	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	1350	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	450	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	450	-
Cl- 13.6(Steel wires- Breaking load test)	-	1350	-
Cl- 13.7(Steel wires- Ductility test)	-	1350	-
Cl- 13.8(Steel wires- Wrapping test)	-	1350	-
Cl- 13.10(Steel wires- Galvanizing test)	-	450	-
Cl-13.7.1(Torsion Test)	-	900	-
Cl-13.7.2(Elongation Test)	-	900	-
Cl-11.1(Standard Length)	-	450	-
Cl-11.2(Random Lengths)	-	450	-

11 Apr, 2028

-
Included w.e.f 12.11.2025 Exclusion:Cl- 13.15 (Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.)) Cl-13.16 (Conductor- Radio interference voltage test)

KC INDIA TEST LABORATORIES LLP, GHAZIABAD

9140406

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	1000	NIL
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	1000	NIL
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	1000	NIL
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	1000	NIL
10 (elec)(Stranding)	-	1000	NIL
10 (elec)(Stranding)	-	1000	NIL
10 (elec)(Stranding)	-	1000	NIL
10 (mech)(Stranding)	-	1000	NIL
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1000	NIL
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1000	NIL
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1000	NIL
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1000	NIL
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1000	NIL
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1000	NIL
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1000	NIL
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1000	NIL
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	1000	NIL
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	1000	NIL
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	NIL
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	1000	NIL
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	NIL
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	NIL
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	1000	NIL
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	1000	NIL
13.7.2 (chem)(Mass of Zinc coating)	-	1000	NIL
13.7.2 (chem)(Uniformity of Zinc coating)	-	1000	NIL
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	NIL
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	NIL
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	NIL
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	NIL
13.9 (elec)(Surface condition test)	-	20000	NIL
13.10 (elec)(Ultimate breaking load)	-	20000	NIL
13.11 (elec)(Stress-strain test)	-	80000	NIL
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	NIL
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	NIL
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	NIL
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	NIL
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	NIL
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	NIL
13.7.2 (elec)(Mass of Zinc coating)	-	1000	NIL
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	NIL
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	NIL
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1000	NIL
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	NIL
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	NIL
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	NIL
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	NIL
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	NIL
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	NIL
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	NIL
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	NIL
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	NIL
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1000	NIL
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1000	NIL
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1000	NIL
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1000	NIL
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	NIL
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	NIL
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	NIL
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	NIL
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	NIL
13.7.2 (elec)(Mass of Zinc coating)	-	1000	NIL
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	NIL
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	NIL
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1000	NIL
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	NIL
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	NIL
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	NIL
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1000	NIL
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1000	NIL
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	NIL
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	1000	NIL
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	NIL
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	1000	NIL
10 (elec)(Stranding)	-	1000	NIL
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1000	NIL
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1000	NIL
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1000	NIL
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1000	NIL
4.1(Resistivity)	-	2000	NIL
4.2(Density)	-	2000	NIL
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	2000	NIL
4.4(Coefficient of Linear Expansion)	-	2000	NIL
5.1(Density)	-	2000	NIL
5.2(Coefficient of Linear Expansion)	-	2000	NIL
14.2(a), 8.2.1(Sizes)	-	2000	NIL
7(FREEDOM FROM DEFECTS)	-	2000	NIL
6.2(zinc Purity)	-	2000	NIL
9(Joint in wires)	-	2000	NIL
6.1.1(Aluminum wires shall conform to IS 5484)	-	2000	NIL
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	1000	NIL
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	1000	NIL
8.2.2(Calculated resistance)	-	1000	NIL
Cl-9.2.5(Welded joint strength)	-	1000	NIL
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires Before Stranding)	-	1000	NIL
8.1.1 & 13.2 Table 2(Diameter of Steel Wires Before Stranding)	-	1000	NIL
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires After Stranding)	-	1000	NIL
8.1.1 & 13.2 Table 2(Diameter of Steel Wires After Stranding)	-	1000	NIL
10(Stranding)	-	1000	NIL
13.3 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	1000	NIL
13.3 Table 2(Breaking Load of Steel Wires Before Stranding)	-	1000	NIL
13.3 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	1000	NIL
13.3 Table 2(Breaking Load of Steel Wires After Stranding)	-	1000	NIL
13.4.1(Ductility by Torsion Test before stranding)	-	1000	NIL
13.4.1(Ductility by Torsion Test before stranding)	-	1000	NIL
13.4.1(Ductility by Torsion Test after stranding)	-	1000	NIL
13.4.1(Ductility by Torsion Test after stranding)	-	1000	NIL
13.5.1(Wrapping Test Aluminium Wires Before Stranding)	-	1000	NIL
13.5.1(Wrapping Test Aluminium Wires After Stranding)	-	1000	NIL
13.5.2(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	NIL
13.5.2(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	NIL
13.8 Table-4(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	NIL
13.8 Table-4(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	NIL
13.8 Table-4(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	NIL
13.8 Table-4(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	NIL
13.7(Galvanising test Dip test for uniformity of coating)	-	1000	NIL
13.7(Galvanising test Dip test for uniformity of coating)	-	1000	NIL
13.7(Weight of Zinc Coating [g/m²])	-	1000	NIL
13.7(Weight of Zinc Coating [g/m²])	-	1000	NIL
7.1(Freedom from Defects)	-	1000	NIL
9(Joint in Wire)	-	1000	NIL

06 Jun, 2027

-
-

RTRC LIMITED, GURUGRAM

9177406

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

Aluminium Conductor for Overhead Transmission Purposes — Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	1000	Type Test-Rs 18000 up to 100 sq mm. Rs 100000 (150 Sq mm to 200 sq mm). Rs 150000 (400 sq mm to 560 sq mm).
Cl-6.1.1(chemical composition of high carbon steel)	-	0	-
Cl-6.2(zinc used for galvanizing)	-	0	-
Cl-7(Freedom From Defects)	-	1000	Type Test-Rs 18000 up to 100 sq mm. Rs 100000 (150 Sq mm to 200 sq mm). Rs 150000 (400 sq mm to 560 sq mm).
Cl-8.1(Wires-Nominal Sizes)	-	1000	Type Test-Rs 18000 up to 100 sq mm. Rs 100000 (150 Sq mm to 200 sq mm). Rs 150000 (400 sq mm to 560 sq mm).
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	1000	-
Cl-9.1(Joint in Wires)	-	0	-
Cl-9.2(Aluminium Wires)	-	0	-
Cl-9.3(Galvanized Steel Wires)	-	0	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	5000	-
Cl-13.3(Conductor- Visual examination)	-	1000	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	5000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	5000	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	2000	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	5000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	2500	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	5000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	0	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	2000	-
Cl- 13.6(Steel wires- Breaking load test)	-	2000	-
Cl- 13.7(Steel wires- Ductility test)	-	2000	-
Cl- 13.8(Steel wires- Wrapping test)	-	2000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	2500	-
Cl-13.7.1(Torsion Test)	-	2500	-
Cl-13.7.2(Elongation Test)	-	2500	-
Cl-11.1(Standard Length)	-	1000	-
Cl-11.2(Random Lengths)	-	0	-

03 Apr, 2027

-
Included w.e.f 11.09.2025 Exclusion: Cl- 13.13 (Conductor- Surface condition test on stranded conductor),Cl- 13.14 (Conductor- Ultimate tensile strength test on stranded conductor),Cl- 13.15 (Conductor- Corona test) and Cl-13.16 (Conductor- Radio interference voltage test)

MSME TESTING CENTRE, CHENNAI

6106704

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-7(Freedom From Defects)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-8.1(Wires-Nominal Sizes)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-9.1(Joint in Wires)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-9.2(Aluminium Wires)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-9.3(Galvanized Steel Wires)	-	2000	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	400	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-13.3(Conductor- Visual examination)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	400	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	700	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-13.4(Aluminium wires-Measurement of diameter)	-	600	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.6(Aluminium wires -Breaking load test)	-	1285	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.8(Aluminium wires- Wrapping test)	-	600	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	700	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.4(Steel wires- Measurement of diameter)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.6(Steel wires- Breaking load test)	-	215	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.7(Steel wires- Ductility test)	-	550	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.8(Steel wires- Wrapping test)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.10(Steel wires- Galvanizing test)	-	2000	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-13.7.1(Torsion Test)	-	550	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-13.7.2(Elongation Test)	-	550	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-6.1.1(chemical composition of high carbon steel)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-6.2(zinc used for galvanizing)	-	2000	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-11.1(Standard Length)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-11.2(Random Lengths)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-6(Material)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-7(Freedom From Defects)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-8.1(Wires-Nominal Sizes)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-9.1(Joint in Wires)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-9.2(Aluminium Wires)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-9.3(Galvanized Steel Wires)	-	2000	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	400	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-13.3(Conductor- Visual examination)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	400	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	700	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-13.4(Aluminium wires-Measurement of diameter)	-	600	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.6(Aluminium wires -Breaking load test)	-	1285	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.8(Aluminium wires- Wrapping test)	-	600	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	700	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.4(Steel wires- Measurement of diameter)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.6(Steel wires- Breaking load test)	-	215	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.7(Steel wires- Ductility test)	-	550	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.8(Steel wires- Wrapping test)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.10(Steel wires- Galvanizing test)	-	2000	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-13.7.1(Torsion Test)	-	550	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-13.7.2(Elongation Test)	-	550	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-6.1.1(chemical composition of high carbon steel)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-6.2(zinc used for galvanizing)	-	2000	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-11.1(Standard Length)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-11.2(Random Lengths)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-6(Material)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-7(Freedom From Defects)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-8.1(Wires-Nominal Sizes)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-9.1(Joint in Wires)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-9.2(Aluminium Wires)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-9.3(Galvanized Steel Wires)	-	2000	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	400	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-13.3(Conductor- Visual examination)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	400	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	700	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-13.4(Aluminium wires-Measurement of diameter)	-	600	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.6(Aluminium wires -Breaking load test)	-	1285	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.8(Aluminium wires- Wrapping test)	-	600	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	700	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.4(Steel wires- Measurement of diameter)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.6(Steel wires- Breaking load test)	-	215	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.7(Steel wires- Ductility test)	-	550	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.8(Steel wires- Wrapping test)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.10(Steel wires- Galvanizing test)	-	2000	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-13.7.1(Torsion Test)	-	550	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-13.7.2(Elongation Test)	-	550	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-6.1.1(chemical composition of high carbon steel)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-6.2(zinc used for galvanizing)	-	2000	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-11.1(Standard Length)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).
Cl-11.2(Random Lengths)	-	100	Other than exempted test: Rs 8000 (up to 80 sq mm), Rs13000(100 sq mm), Rs 33000 (130 sq mm), Rs 37000 (150 sq mm to 400 sq mm for 33 Strands), Rs 49000 (400 sq mm,520 sq mm,560 sq mm,690 sq mm for 49 Strands), Rs 61000 (420 sq mm,530 sq mm,810 sq mm).

31 Dec, 2026

-
Included w.e.f. 29.10.2025 "Cl- 13.14 (Conductor- Ultimate tensile strength test on stranded conductor) Cl- 13.13 (Conductor- Surface condition test on stranded conductor) Cl- 13.15 (Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.)) Cl-13.16 (Conductor- Radio interference voltage test)"

ALAIPURIA TEST HOUSE PRIVATE LIMITED, GHAZIABAD

8180426

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	100	For 22, 34, 55, 80,100 Rs. 10,000/- each 125, 148, 173, 200 525, 570, 604, 642, 695,767 sq.mm Rs. 15,500/- each
7.1 Table-1(Dimensional measurement of wires)	-	500	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	500	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	100	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	100	-
9.1(Stranding)	-	200	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	100	-
9.3(Direction of Lay)	-	200	-
9.4(Multiple layers of wires)	-	400	-
11(Packing and Marking)	-	100	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	500	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	500	-
12.3 Table 1(Elongation Test- Before Stranding)	-	500	-
12.3 Table 1(Elongation Test- After Stranding)	-	500	-
12.4 Table 1(Resistance of Aluminium wire)	-	200	-
9.2(Lay Ratio 24 wire layer)	-	200	-
9.2(Lay Ratio 18 wire layer)	-	500	-
9.2(Lay Ratio 12 wire layer)	-	300	-
9.2(Lay Ratio 3/6 wire layer)	-	300	-
7.2.1(Sizes)	-	200	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	500	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	500	-
6.1(Freedom from Defects)	-	0	-
7.1 Table-1(Dimensional measurement of wires)	-	0	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	0	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	-
9.1(Stranding)	-	0	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	0	-
9.3(Direction of Lay)	-	0	-
9.4(Multiple layers of wires)	-	0	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	0	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	0	-
12.3 Table 1(Elongation Test- Before Stranding)	-	0	-
12.3 Table 1(Elongation Test- After Stranding)	-	0	-
12.4 Table 1(Resistance of Aluminium wire)	-	0	-
9.2(Lay Ratio 24 wire layer)	-	0	-
9.2(Lay Ratio 18 wire layer)	-	0	-
9.2(Lay Ratio 12 wire layer)	-	0	-
9.2(Lay Ratio 3/6 wire layer)	-	0	-
7.2.1(Sizes)	-	0	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	0	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	0	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	0	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	0	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	0	-
6.1(Freedom from Defects)	-	0	-
7.1 Table-1(Dimensional measurement of wires)	-	0	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	0	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	-
9.1(Stranding)	-	0	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	0	-
9.3(Direction of Lay)	-	0	-
9.4(Multiple layers of wires)	-	0	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	0	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	0	-
12.3 Table 1(Elongation Test- Before Stranding)	-	0	-
12.3 Table 1(Elongation Test- After Stranding)	-	0	-
12.4 Table 1(Resistance of Aluminium wire)	-	0	-
9.2(Lay Ratio 24 wire layer)	-	0	-
9.2(Lay Ratio 18 wire layer)	-	0	-
9.2(Lay Ratio 12 wire layer)	-	0	-
9.2(Lay Ratio 3/6 wire layer)	-	0	-
7.2.1(Sizes)	-	0	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	0	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	0	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	0	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	0	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	0	-

03 Oct, 2027

-
Incuded w.e.f. 14.10.2025

KC INDIA TEST LABORATORIES LLP, GHAZIABAD

9140406

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

120000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	1000	NIL
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	NIL
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	NIL
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	NIL
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	NIL
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	2000	NIL
16.5, Table 2(Breaking Load Test - before stranding)	-	1000	NIL
16.5, Table 2(Breaking Load Test - after stranding)	-	11000	NIL
16.6, Table 1(Elongation Test - before stranding)	-	2500	NIL
16.6, Table 1(Elongation Test - after stranding)	-	4500	NIL
16.7, Table 2(Resistivity Test)	-	12500	NIL
16.8(Wrapping Test)	-	4000	NIL
11(Stranding)	-	2000	NIL
8(Freedom from defects)	-	1000	NIL
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	25000	NIL
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	10000	NIL
16.11(Stress-strain Test)	-	40000	NIL
16.2(Visual Examination)	-	1000	NIL
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	NIL
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	NIL
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	NIL
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	NIL
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	2000	NIL
16.5, Table 2(Breaking Load Test - before stranding)	-	1000	NIL
16.5, Table 2(Breaking Load Test - after stranding)	-	11000	NIL
16.6, Table 1(Elongation Test - before stranding)	-	2500	NIL
16.6, Table 1(Elongation Test - after stranding)	-	4500	NIL
16.7, Table 2(Resistivity Test)	-	12500	NIL
16.8(Wrapping Test)	-	4000	NIL
11(Stranding)	-	2000	NIL
8(Freedom from defects)	-	1000	NIL
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	25000	NIL
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	10000	NIL
16.11(Stress-strain Test)	-	40000	NIL

06 Jun, 2027

-
Included w.e.f. 16.10.2025

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

9138006

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

38450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	500	-
Cl-6.1.1(chemical composition of high carbon steel)	-	2000	-
Cl-6.2(zinc used for galvanizing)	-	1000	-
Cl-7(Freedom From Defects)	-	500	-
Cl-8.1(Wires-Nominal Sizes)	-	500	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	500	-
Cl-9.1(Joint in Wires)	-	500	-
Cl-9.2(Aluminium Wires)	-	500	-
Cl-9.3(Galvanized Steel Wires)	-	1000	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	750	-
Cl-13.3(Conductor- Visual examination)	-	200	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	2500	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	3500	-
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	5000	-
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	6000	-
Cl- 13.15(Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.))	-	0	-
Cl-13.16(Conductor- Radio interference voltage test)	-	0	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	1000	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	1000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	500	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	2000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	500	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	500	-
Cl- 13.6(Steel wires- Breaking load test)	-	1000	-
Cl- 13.7(Steel wires- Ductility test)	-	1000	-
Cl- 13.8(Steel wires- Wrapping test)	-	1000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	3000	-
Cl-13.7.1(Torsion Test)	-	500	-
Cl-13.7.2(Elongation Test)	-	500	-
Cl-11.1(Standard Length)	-	500	-
Cl-11.2(Random Lengths)	-	500	-

31 Dec, 2026

-
Included w.e.f 09.10.2025 Exclusion: Cl- 13.15 (Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.)), Cl-13.16 (Conductor- Radio interference voltage test)

IEC TEST LABS LLP

8165726

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

140000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	1000	Rs. 20000/- [Up to 100 Sq.mm], Rs. 110000/- [150 & 200 Sq.mm] Rs. 120000/- [400 & 560 Sq.mm] Rs. 140000/- [420 & 520 Sq.mm]
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	1000	-
10 (elec)(Stranding)	-	1000	-
10 (elec)(Stranding)	-	1000	-
10 (elec)(Stranding)	-	1000	-
10 (mech)(Stranding)	-	1000	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	1000	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	1000	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	1000	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	1000	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	1000	-
13.7.2 (chem)(Mass of Zinc coating)	-	1000	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.9 (elec)(Surface condition test)	-	20000	-
13.10 (elec)(Ultimate breaking load)	-	20000	-
13.11 (elec)(Stress-strain test)	-	80000	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	1000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	1000	-
10 (elec)(Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1000	-
4.1(Resistivity)	-	2000	-
4.2(Density)	-	2000	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	2000	-
4.4(Coefficient of Linear Expansion)	-	2000	-
5.1(Density)	-	2000	-
5.2(Coefficient of Linear Expansion)	-	2000	-
14.2(a), 8.2.1(Sizes)	-	2000	-
7(FREEDOM FROM DEFECTS)	-	2000	-
6.2(zinc Purity)	-	2000	-
9(Joint in wires)	-	2000	-
6.1.1(Aluminum wires shall conform to IS 5484)	-	2000	-
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	1000	-
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	1000	-
8.2.2(Calculated resistance)	-	1000	-
Cl-9.2.5(Welded joint strength)	-	2000	-

07 Sep, 2026

-
-

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

Aluminum conductors for overhead transmission purposes.

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	750	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	750	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	750	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	750	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1000	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1000	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1000	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1000	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	500	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	500	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	500	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	100	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	100	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	100	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	1000	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	1000	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.7.2 (chem)(Mass of Zinc coating)	-	750	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.7.2 (chem)(Uniformity of Zinc coating)	-	750	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	200	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	200	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	200	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	200	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
10 (mech)(Stranding)	-	0	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.9 (elec)(Surface condition test)	-	25000	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.10 (elec)(Ultimate breaking load)	-	25000	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)
13.11 (elec)(Stress-strain test)	-	25000	Type test: Rs. 7500/- (upto 100 sq. mm), Rs. 90000/- (150 sqmm to 200 sq. mm), Rs. 130000/-(400sqmm to 560 sq mm)

11 Apr, 2028

-
-

Robust Testing Solutions Private Limited, Alwar

8173526

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	1000	Type test: Rs. 18000/- (upto 100 sq. mm), Rs. 100000/- (150 sqmm to 200 sq. mm), Rs. 150000/-(400sqmm to 560 sq mm)
Cl-7(Freedom From Defects)	-	1000	Type test: Rs. 18000/- (upto 100 sq. mm), Rs. 100000/- (150 sqmm to 200 sq. mm), Rs. 150000/-(400sqmm to 560 sq mm)
Cl-8.1(Wires-Nominal Sizes)	-	1000	Type test: Rs. 18000/- (upto 100 sq. mm), Rs. 100000/- (150 sqmm to 200 sq. mm), Rs. 150000/-(400sqmm to 560 sq mm)
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	1000	-
Cl-9.1(Joint in Wires)	-	0	-
Cl-9.2(Aluminium Wires)	-	0	-
Cl-9.3(Galvanized Steel Wires)	-	0	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	5000	-
Cl-13.3(Conductor- Visual examination)	-	1000	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	5000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	5000	-
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	10000	-
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	10000	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	2000	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	5000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	2500	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	5000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	0	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	2000	-
Cl- 13.6(Steel wires- Breaking load test)	-	2000	-
Cl- 13.7(Steel wires- Ductility test)	-	2000	-
Cl- 13.8(Steel wires- Wrapping test)	-	2000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	2500	-
Cl-13.7.1(Torsion Test)	-	2500	-
Cl-13.7.2(Elongation Test)	-	2500	-
Cl-11.1(Standard Length)	-	1000	-
Cl-11.2(Random Lengths)	-	0	-
Cl-6.2(zinc used for galvanizing)	-	0	-
Cl-6.1.1(chemical composition of high carbon steel)	-	0	-
Cl-6(Material)	-	0	-
Cl-7(Freedom From Defects)	-	1000	-
Cl-8.1(Wires-Nominal Sizes)	-	1000	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	0	-
Cl-9.1(Joint in Wires)	-	5000	-
Cl-9.2(Aluminium Wires)	-	0	-
Cl-9.3(Galvanized Steel Wires)	-	1000	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	2000	-
Cl-13.3(Conductor- Visual examination)	-	2000	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	2000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	5000	-
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	15000	-
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	10000	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	10000	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	10000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	10000	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	10000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	0	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	2000	-
Cl- 13.6(Steel wires- Breaking load test)	-	5000	-
Cl- 13.7(Steel wires- Ductility test)	-	2000	-
Cl- 13.8(Steel wires- Wrapping test)	-	2000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	2000	-
Cl-13.7.1(Torsion Test)	-	5000	-
Cl-13.7.2(Elongation Test)	-	5000	-
Cl-11.1(Standard Length)	-	0	-
Cl-11.2(Random Lengths)	-	0	-
Cl-6.1.1(chemical composition of high carbon steel)	-	0	-
Cl-6.2(zinc used for galvanizing)	-	5000	-
Cl-6(Material)	-	5000	-
Cl-7(Freedom From Defects)	-	5000	-
Cl-8.1(Wires-Nominal Sizes)	-	1000	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	1000	-
Cl-9.1(Joint in Wires)	-	1500	-
Cl-9.2(Aluminium Wires)	-	1500	-
Cl-9.3(Galvanized Steel Wires)	-	1500	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	1500	-
Cl-13.3(Conductor- Visual examination)	-	1500	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	2000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	2000	-
Cl- 13.14(Conductor- Ultimate tensile strength test on stranded conductor)	-	5000	-
Cl- 13.13(Conductor- Surface condition test on stranded conductor)	-	5000	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	1500	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	1500	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	3500	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	4000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	5000	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	5000	-
Cl- 13.6(Steel wires- Breaking load test)	-	10000	-
Cl- 13.7(Steel wires- Ductility test)	-	5000	-
Cl- 13.8(Steel wires- Wrapping test)	-	5000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	4500	-
Cl-13.7.1(Torsion Test)	-	4000	-
Cl-13.7.2(Elongation Test)	-	4000	-
Cl-11.1(Standard Length)	-	1500	-
Cl-11.2(Random Lengths)	-	4500	-
Cl-6.1.1(chemical composition of high carbon steel)	-	4000	-
Cl-6.2(zinc used for galvanizing)	-	4000	-

02 Aug, 2029

-
Included w.e.f 18.08.2025 Exclusion: Cl- 13.15 (Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.)) Cl-13.16 (Conductor- Radio interference voltage test)

ARYAVRAT TEST HOUSE PRIVATE LIMITED

5191706

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

15 mm² to 767 mm²

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	100	-
7.1 Table-1(Dimensional measurement of wires)	-	100	( For Each Wire )
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	500	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	100	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	300	-
9.1(Stranding)	-	500	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	250	( For Each Layer )
9.3(Direction of Lay)	-	100	-
9.4(Multiple layers of wires)	-	100	-
11(Packing and Marking)	-	100	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	500	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	500	-
12.3 Table 1(Elongation Test- Before Stranding)	-	500	-
12.3 Table 1(Elongation Test- After Stranding)	-	500	-
12.4 Table 1(Resistance of Aluminium wire)	-	500	-
9.2(Lay Ratio 24 wire layer)	-	100	-
9.2(Lay Ratio 18 wire layer)	-	100	-
9.2(Lay Ratio 12 wire layer)	-	100	-
9.2(Lay Ratio 3/6 wire layer)	-	100	-
7.2.1(Sizes)	-	500	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	100	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	500	-

28 Nov, 2028

-
-

AADIDEV TEST & RESEARCH CENTRE LLP

8194926

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	500	-
10 (elec)(Stranding)	-	0	-
10 (elec)(Stranding)	-	0	-
10 (elec)(Stranding)	-	0	-
10 (mech)(Stranding)	-	0	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	500	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	500	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	200	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	200	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	500	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	500	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	500	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	500	-
13.7.2 (chem)(Mass of Zinc coating)	-	1000	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	500	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	500	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	500	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	500	-
10 (elec)(Stranding)	-	0	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	200	-
4.1(Resistivity)	-	500	-
4.2(Density)	-	500	-
5.1(Density)	-	500	-
14.2(a), 8.2.1(Sizes)	-	0	-
7(FREEDOM FROM DEFECTS)	-	500	-
9(Joint in wires)	-	0	-
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	1000	-
8.2.2(Calculated resistance)	-	1000	-
Cl-9.2.5(Welded joint strength)	-	500	-
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table 2(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2(Diameter of Steel Wires After Stranding)	-	500	-
10(Stranding)	-	0	-
13.3 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	500	-
13.3 Table 2(Breaking Load of Steel Wires Before Stranding)	-	500	-
13.3 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	500	-
13.3 Table 2(Breaking Load of Steel Wires After Stranding)	-	500	-
13.4.1(Ductility by Torsion Test before stranding)	-	500	-
13.4.1(Ductility by Torsion Test before stranding)	-	500	-
13.4.1(Ductility by Torsion Test after stranding)	-	500	-
13.4.1(Ductility by Torsion Test after stranding)	-	500	-
13.5.1(Wrapping Test Aluminium Wires Before Stranding)	-	500	-
13.5.1(Wrapping Test Aluminium Wires After Stranding)	-	500	-
13.5.2(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.2(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.8 Table-4(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.8 Table-4(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.7(Galvanising test Dip test for uniformity of coating)	-	1000	-
13.7(Galvanising test Dip test for uniformity of coating)	-	1000	-
13.7(Weight of Zinc Coating [g/m²])	-	1000	-
13.7(Weight of Zinc Coating [g/m²])	-	1000	-
7.1(Freedom from Defects)	-	500	-
9(Joint in Wire)	-	0	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	0	-
4.4(Coefficient of Linear Expansion)	-	0	-
5.2(Coefficient of Linear Expansion)	-	0	-
6.1.1(Aluminum wires shall conform to IS 5484)	-	0	-
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	0	-
6.2(zinc Purity)	-	0	-

29 Dec, 2028

-
13.9 (elec) (Surface condition test), 13.10 (elec) (Ultimate breaking load), 13.11 (elec) (Stress-strain test)

AADIDEV TEST & RESEARCH CENTRE LLP

8194926

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	500	-
7.1 Table-1(Dimensional measurement of wires)	-	1000	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	1500	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	500	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	500	-
9.1(Stranding)	-	500	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	1000	-
9.3(Direction of Lay)	-	500	-
9.4(Multiple layers of wires)	-	500	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1500	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	1500	-
12.3 Table 1(Elongation Test- Before Stranding)	-	1000	-
12.3 Table 1(Elongation Test- After Stranding)	-	1000	-
12.4 Table 1(Resistance of Aluminium wire)	-	1000	-
9.2(Lay Ratio 24 wire layer)	-	1000	-
9.2(Lay Ratio 18 wire layer)	-	1000	-
9.2(Lay Ratio 12 wire layer)	-	1000	-
9.2(Lay Ratio 3/6 wire layer)	-	1000	-
7.2.1(Sizes)	-	0	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	500	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	2000	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	2000	-

29 Dec, 2028

-
-

AADIDEV TEST & RESEARCH CENTRE LLP

8194926

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	800	-
12.3, Table-1(Breaking load before stranding)	-	1500	-
12.3, Table-1(Breaking load after stranding)	-	1500	-
12.4(Wrapping test)	-	500	-
12.5, Table 1(Resistance test)	-	1500	-
12.6, Table 3(Measurement of lay ratio)	-	500	-
9.3(Stranding)	-	500	-
6(Freedom from defects)	-	800	-
7.2.1(Sizes)	-	500	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	500	-
9.2(Lay ratio)	-	1000	-
9.4(Multiple layer of wires)	-	500	-
4.1(Resistivity)	-	1000	-
4.2(Density)	-	0	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	0	-
4.4(Coefficient of Linear Expansion)	-	0	-
5(Material)	-	0	-
7.1.1(Nominal Sizes)	-	800	-
7.2.2(Resistance)	-	1000	-

29 Dec, 2028

-
-

National Test House (NWR) - NTH, Jaipur

8122904

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

10 to 560 sq, mm

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	500	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	500	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	500	-
10 (elec)(Stranding)	-	500	-
10 (elec)(Stranding)	-	500	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	4000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	4000	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	4000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	4000	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	2000	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	2000	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	2000	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	2000	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	2000	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	2000	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	2000	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	2000	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	4000	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	4000	-
13.7.2 (chem)(Mass of Zinc coating)	-	2000	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	-
13.9 (elec)(Surface condition test)	-	5000	-
13.10 (elec)(Ultimate breaking load)	-	5000	-
13.11 (elec)(Stress-strain test)	-	10000	-
10 (mech)(Stranding)	-	500	-
7.1(Freedom from Defects)	-	500	-
9(Joint in wires)	-	0	-
7(FREEDOM FROM DEFECTS)	-	500	-

31 Dec, 2026

-
-

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

9138006

IS 398 : Part 5 (1992)

Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 (elec)(Freedom from defects)	-	100	-
13.2 (mech)(Visual Examination)	-	100	-
13.3 Table-1 (mech)(Diameter-Aluminium wires)	-	200	-
13.3 Table-2 (mech)(Diameter-Galvanized Steel wires)	-	200	-
13.5.1 Table 3 (elec)(Breaking Load on Complete conductor)	-	700	-
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	100	-
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	100	-
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	700	-
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	300	-
13.6.1 (mech)(Ductility by Torsion Test before stranding)	-	100	-
13.6.1 (mech)(Ductility by Torsion Test after stranding)	-	500	-
13.6.2 (mech)(Ductility by Elongation Test before stranding)	-	100	-
13.6.2 (mech)(Ductility by Elongation Test after stranding)	-	500	-
13.7.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	100	-
13.7.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	300	-
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	100	-
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	200	-
13.8 (elec)(Resistance test-Aluminium wire before Stranding)	-	500	-
14.8 (elec)(Resistance test-Aluminium wire after stranding)	-	2000	-
13.9.2 (chem)(Mass of Zinc coating)	-	500	-
13.9.2 (chem)(Uniformity of Zinc coating)	-	500	-
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	200	-
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	200	-
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-	200	-
13.4 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	200	-
13.10 (elec)(Surface condition test)	-	3700	-
13.11 (elec)(Corona Test)	-	0	-
13.12 (elec)(Radio Interference Voltage Test)	-	0	-
10.4 (mech)(Direction of lay)	-	100	-
13.5.2 & Table 2 (mech)(Breaking load of steel wire before stranding)	-	100	-
13.9 (elec)(The test of galvanising)	-	100	-
8.2.1 (elec)(Size of complete conductor)	-	100	-
8.2.2 (elec)(Resistance of complete conductor)	-	1000	-
10.4 (elec)(Direction of lay)	-	100	-
13.5.2 & Table 2 (elec)(Breaking load of steel wire before stranding)	-	100	-
13.4 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	200	-
13.4 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	200	-
13.4 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-	200	-
13.4 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	200	-
13.9.2 (elec)(Uniformity of Zinc coating)	-	500	-
13.9.2 (elec)(Mass of Zinc coating)	-	500	-
13.7.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	200	-
13.7.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	500	-
13.7.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	300	-
13.7.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	100	-
13.6.2 (elec)(Ductility by Elongation Test after stranding)	-	500	-
13.6.2 (elec)(Ductility by Elongation Test before stranding)	-	100	-
13.6.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.6.1 (elec)(Ductility by Torsion Test before stranding)	-	100	-
13.5.2 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	300	-
13.5.2 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	700	-
13.5.2 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	100	-
13.5.2 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	100	-
13.3 Table-2 (elec)(Diameter-Galvanized Steel wires)	-	200	-
13.3 Table-1 (elec)(Diameter-Aluminium wires)	-	200	-
13.2 (elec)(Visual Examination)	-	100	-
13.2(Visual Examination)	-	100	-
13.2(Visual Examination)	-	100	-
13.3(Diameter(mm), Aluminium wire)	-	200	-
13.3(Diameter(mm), Aluminium wire)	-	200	-
13.3(Diameter(mm), Steel Wire)	-	100	-
13.3(Diameter(mm), Steel Wire)	-	100	-
10(Stranding)	-	100	-
10(Stranding, Direction of Outermost layer)	-	100	-
10(Stranding, Ratio of diameter of Aluminium)	-	100	-
10.2, table 4(Lay Ratio, Aluminium Wire Outer of Layer)	-	300	-
10.2, table 4(Lay Ratio, Aluminium Wire, Layer immediately)	-	200	-
10.2, table 4(Lay Ratio, Aluminium Wire, Inner most layer of three Aluminium wire)	-	250	-
10.2, table 4(Lay Ratio, Steel wire, (6 wire layar))	-	250	-
13.5.2(Breaking Load, Aluminium wire(Before Stranding))	-	100	-
13.5.2(Breaking Load, Steel wire (Before Stranding))	-	100	-
13.5.2(Breaking Load Steel wire (After Stranding))	-	300	-
13.5.2(Breaking Load Aluminium wire (After Stranding))	-	700	-
13.6("Ductility Test on steel wire, Torsion Test ")	-	500	-
13.6(Ductility Test on steel wire, Torsion Test)	-	500	-
13.6(Ductility Test on steel wire, Elongation Test)	-	500	-
13.6(Ductility Test on steel wire, Elongation Test)	-	500	-
13.7(Wrapping Test, Aluminium wire)	-	300	-
13.7(Wrapping Test, Steel wire)	-	300	-
13.9(Galvanizing Test on steel wire, uniformity of coating)	-	500	-
13.9(Galvanizing Test on steel wire, uniformity of coating)	-	500	-
13.9(Galvanizing Test on steel wire,Weight of zinc coating)	-	500	-
13.9(Galvanizing Test on steel wire,Weight of zinc coating)	-	500	-
9(Joint in wires,)	-	200	-
9(Joint in wires,)	-	200	-
13.1(Surface Condition Test)	-	3700	-
13.11(Corona Test)	-	0	-
13.12(Radio Interference Voltage Test)	-	0	-

31 Dec, 2026

-
Included w.e.f 28.07.2025 Exclusion: Cl 13.11 (Corona Test), Cl 13.12 (Radio Interference Voltage Test)

AJEO TESTING LABS PVT LTD, GHAZIABAD

8178606

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	250	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.1 Table-1(Dimensional measurement of wires)	-	1200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	1200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1(Joints in wires-Conductors Containing Seven Wires)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.1(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.3(Direction of Lay)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.4(Multiple layers of wires)	-	250	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
11(Packing and Marking)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.2 Table 1(Breaking Load Test- After Stranding)	-	1250	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.3 Table 1(Elongation Test- Before Stranding)	-	1250	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.3 Table 1(Elongation Test- After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.4 Table 1(Resistance of Aluminium wire)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 24 wire layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 18 wire layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 12 wire layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 3/6 wire layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.2.1(Sizes)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Freedom from Defects)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.1 Table-1(Dimensional measurement of wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1(Joints in wires-Conductors Containing Seven Wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.1(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.3(Direction of Lay)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.4(Multiple layers of wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
11(Packing and Marking)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.2 Table 1(Breaking Load Test- After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.3 Table 1(Elongation Test- Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.3 Table 1(Elongation Test- After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.4 Table 1(Resistance of Aluminium wire)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 24 wire layer)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 18 wire layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 12 wire layer)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 3/6 wire layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.2.1(Sizes)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.2 Table 1(Breaking Load Test- Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Freedom from Defects)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.1 Table-1(Dimensional measurement of wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1(Joints in wires-Conductors Containing Seven Wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.1(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.3(Direction of Lay)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.4(Multiple layers of wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
11(Packing and Marking)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.2 Table 1(Breaking Load Test- After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.3 Table 1(Elongation Test- Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.3 Table 1(Elongation Test- After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.4 Table 1(Resistance of Aluminium wire)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 24 wire layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 18 wire layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 12 wire layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 3/6 wire layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.2.1(Sizes)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.2 Table 1(Breaking Load Test- Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1(Freedom from Defects)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.1 Table-1(Dimensional measurement of wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1(Joints in wires-Conductors Containing Seven Wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.1(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.3(Direction of Lay)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.4(Multiple layers of wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
11(Packing and Marking)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.2 Table 1(Breaking Load Test- After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.3 Table 1(Elongation Test- Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.3 Table 1(Elongation Test- After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.4 Table 1(Resistance of Aluminium wire)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 24 wire layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 18 wire layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 12 wire layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 3/6 wire layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.2.1(Sizes)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.2 Table 1(Breaking Load Test- Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra

-
Included w.e.f 16.07.2025

AJEO TESTING LABS PVT LTD, GHAZIABAD

8178606

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

10500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (mech)(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (chem)(Mass of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (chem)(Uniformity of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.9 (elec)(Surface condition test)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Uniformity of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Mass of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Uniformity of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Mass of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra1500
4.1(Resistivity)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.2(Density)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.4(Coefficient of Linear Expansion)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.1(Density)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.2(Coefficient of Linear Expansion)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
14.2(a), 8.2.1(Sizes)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7(FREEDOM FROM DEFECTS)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9(Joint in wires)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1.1(Aluminum wires shall conform to IS 5484)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.2.2(Calculated resistance)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl-9.2.5(Welded joint strength)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2(Diameter of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2(Diameter of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10(Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2(Wrapping Test Galvanized Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Galvanising test Dip test for uniformity of coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Galvanising test Dip test for uniformity of coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Weight of Zinc Coating [g/m²])	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Weight of Zinc Coating [g/m²])	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.1(Freedom from Defects)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9(Joint in Wire)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (mech)(Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	10000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1550	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1550	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1550	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (chem)(Mass of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (chem)(Uniformity of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.9 (elec)(Surface condition test)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Uniformity of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Mass of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1200	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Uniformity of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Mass of Zinc coating)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.1(Resistivity)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.2(Density)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.4(Coefficient of Linear Expansion)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.1(Density)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.2(Coefficient of Linear Expansion)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
14.2(a), 8.2.1(Sizes)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7(FREEDOM FROM DEFECTS)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9(Joint in wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1.1(Aluminum wires shall conform to IS 5484)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.2.2(Calculated resistance)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl-9.2.5(Welded joint strength)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2(Diameter of Steel Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2(Diameter of Steel Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2(Breaking Load of Steel Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2(Breaking Load of Steel Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test before stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Steel Core (6 Wire Layer))	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Galvanising test Dip test for uniformity of coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Galvanising test Dip test for uniformity of coating)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Weight of Zinc Coating [g/m²])	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Weight of Zinc Coating [g/m²])	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.1(Freedom from Defects)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9(Joint in Wire)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (mech)(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (chem)(Mass of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (chem)(Uniformity of Zinc coating)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.9 (elec)(Surface condition test)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Mass of Zinc coating)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Uniformity of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7.2 (elec)(Mass of Zinc coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10 (elec)(Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.1(Resistivity)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.2(Density)	-	1000	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	0	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.4(Coefficient of Linear Expansion)	-	0	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.1(Density)	-	0	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5.2(Coefficient of Linear Expansion)	-	0	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
14.2(a), 8.2.1(Sizes)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7(FREEDOM FROM DEFECTS)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9(Joint in wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1.1(Aluminum wires shall conform to IS 5484)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.2.2(Calculated resistance)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl-9.2.5(Welded joint strength)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2(Diameter of Steel Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8.1.1 & 13.2 Table 2(Diameter of Steel Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
10(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2(Breaking Load of Steel Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.3 Table 2(Breaking Load of Steel Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test before stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test before stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test after stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.4.1(Ductility by Torsion Test after stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1(Wrapping Test Aluminium Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.1(Wrapping Test Aluminium Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2(Wrapping Test Galvanized Steel Wires Before Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.5.2(Wrapping Test Galvanized Steel Wires After Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.8 Table-4(Lay Ratio- Steel Core (6 Wire Layer))	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Galvanising test Dip test for uniformity of coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Galvanising test Dip test for uniformity of coating)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Weight of Zinc Coating [g/m²])	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
13.7(Weight of Zinc Coating [g/m²])	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.1(Freedom from Defects)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9(Joint in Wire)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra

-
Included w.e.f 22.07.2025 Exclusion: Cl 13.9 (elec) (Surface condition test), Cl 13.10 (elec) (Ultimate breaking load), Cl 13.11 (elec) (Stress-strain test), Cl 6.2 (zinc Purity), Cl 6.2 (It shall conform to and satisfy all the requirements of IS 209)

AJEO TESTING LABS PVT LTD, GHAZIABAD

8178606

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.3, Table-1(Breaking load before stranding)	-	700	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.3, Table-1(Breaking load after stranding)	-	700	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.4(Wrapping test)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.5, Table 1(Resistance test)	-	2500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.6, Table 3(Measurement of lay ratio)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.3(Stranding)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6(Freedom from defects)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.2.1(Sizes)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8, 8.1, 8.2(Joint in wires, except during stranding)	-	100	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay ratio)	-	400	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.4(Multiple layer of wires)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.1(Resistivity)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.2(Density)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.4(Coefficient of Linear Expansion)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5(Material)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.1.1(Nominal Sizes)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.2.2(Resistance)	-	2500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.3, Table-1(Breaking load before stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.3, Table-1(Breaking load after stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.4(Wrapping test)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.5, Table 1(Resistance test)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.6, Table 3(Measurement of lay ratio)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.3(Stranding)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
6(Freedom from defects)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.2.1(Sizes)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
8, 8.1, 8.2(Joint in wires, except during stranding)	-	300	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay ratio)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.4(Multiple layer of wires)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.1(Resistivity)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.2(Density)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
4.4(Coefficient of Linear Expansion)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
5(Material)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.1.1(Nominal Sizes)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
7.2.2(Resistance)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra

-
Included w.e.f. 29.07.2025

AADHAR TESTING SOLUTIONS LLP, GHAZIABAD

8185026

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	0	-
7.1 Table-1(Dimensional measurement of wires)	-	200	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	200	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	-
9.1(Stranding)	-	0	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	200	-
9.3(Direction of Lay)	-	100	-
9.4(Multiple layers of wires)	-	100	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	200	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	200	-
12.3 Table 1(Elongation Test- Before Stranding)	-	200	-
12.3 Table 1(Elongation Test- After Stranding)	-	200	-
12.4 Table 1(Resistance of Aluminium wire)	-	200	-
9.2(Lay Ratio 24 wire layer)	-	200	-
9.2(Lay Ratio 18 wire layer)	-	200	-
9.2(Lay Ratio 12 wire layer)	-	200	-
9.2(Lay Ratio 3/6 wire layer)	-	200	-
7.2.1(Sizes)	-	100	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	100	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	100	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	100	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	200	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	200	-
6.1(Freedom from Defects)	-	0	-
7.1 Table-1(Dimensional measurement of wires)	-	200	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	200	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	-
9.1(Stranding)	-	0	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	200	-
9.3(Direction of Lay)	-	100	-
9.4(Multiple layers of wires)	-	0	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	200	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	200	-
12.3 Table 1(Elongation Test- Before Stranding)	-	200	-
12.3 Table 1(Elongation Test- After Stranding)	-	200	-
12.4 Table 1(Resistance of Aluminium wire)	-	200	-
9.2(Lay Ratio 24 wire layer)	-	200	-
9.2(Lay Ratio 18 wire layer)	-	200	-
9.2(Lay Ratio 12 wire layer)	-	200	-
9.2(Lay Ratio 3/6 wire layer)	-	200	-
7.2.1(Sizes)	-	100	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	100	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	100	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	200	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	200	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	200	-
6.1(Freedom from Defects)	-	0	-
7.1 Table-1(Dimensional measurement of wires)	-	100	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	200	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	-
9.1(Stranding)	-	0	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	200	-
9.3(Direction of Lay)	-	100	-
9.4(Multiple layers of wires)	-	0	-
11(Packing and Marking)	-	0	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	0	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	200	-
12.3 Table 1(Elongation Test- Before Stranding)	-	200	-
12.3 Table 1(Elongation Test- After Stranding)	-	200	-
12.4 Table 1(Resistance of Aluminium wire)	-	200	-
9.2(Lay Ratio 24 wire layer)	-	200	-
9.2(Lay Ratio 18 wire layer)	-	200	-
9.2(Lay Ratio 12 wire layer)	-	200	-
9.2(Lay Ratio 3/6 wire layer)	-	200	-
7.2.1(Sizes)	-	100	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	100	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	100	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	200	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	200	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	200	-

01 May, 2028

-
Included w.e.f 13.10.2025

AADHAR TESTING SOLUTIONS LLP, GHAZIABAD

8185026

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	300	25% Discount for BIS
10 (elec)(Stranding)	-	0	-
10 (elec)(Stranding)	-	0	-
10 (elec)(Stranding)	-	0	-
10 (mech)(Stranding)	-	0	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	500	25% Discount for BIS
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	500	25% Discount for BIS
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	500	25% Discount for BIS
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	500	25% Discount for BIS
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	25% Discount for BIS
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	25% Discount for BIS
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	300	25% Discount for BIS
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	300	25% Discount for BIS
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	300	25% Discount for BIS
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	300	25% Discount for BIS
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	300	25% Discount for BIS
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	300	25% Discount for BIS
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	750	25% Discount for BIS
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	750	25% Discount for BIS
13.7.2 (chem)(Mass of Zinc coating)	-	750	25% Discount for BIS
13.7.2 (chem)(Uniformity of Zinc coating)	-	750	25% Discount for BIS
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	300	25% Discount for BIS
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	300	25% Discount for BIS
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	300	25% Discount for BIS
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	300	25% Discount for BIS
13.9 (elec)(Surface condition test)	-	0	-
13.10 (elec)(Ultimate breaking load)	-	0	-
13.11 (elec)(Stress-strain test)	-	0	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	300	25% Discount for BIS
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	300	25% Discount for BIS
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	300	25% Discount for BIS
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	300	25% Discount for BIS
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	300	25% Discount for BIS
13.7.2 (elec)(Uniformity of Zinc coating)	-	750	25% Discount for BIS
13.7.2 (elec)(Mass of Zinc coating)	-	750	25% Discount for BIS
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	300	25% Discount for BIS
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	300	25% Discount for BIS
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	300	25% Discount for BIS
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	300	25% Discount for BIS
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	750	25% Discount for BIS
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	750	25% Discount for BIS
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	750	25% Discount for BIS
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	750	25% Discount for BIS
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	300	25% Discount for BIS
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	300	25% Discount for BIS
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	300	25% Discount for BIS
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	300	25% Discount for BIS
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	300	25% Discount for BIS
13.7.2 (elec)(Uniformity of Zinc coating)	-	750	25% Discount for BIS
13.7.2 (elec)(Mass of Zinc coating)	-	750	25% Discount for BIS
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	300	25% Discount for BIS
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	300	25% Discount for BIS
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	300	25% Discount for BIS
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	300	25% Discount for BIS
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	25% Discount for BIS
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	25% Discount for BIS
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	25% Discount for BIS
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	500	25% Discount for BIS
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	25% Discount for BIS
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	500	25% Discount for BIS
10 (elec)(Stranding)	-	0	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	300	25% Discount for BIS
4.1(Resistivity)	-	750	25% Discount for BIS
4.2(Density)	-	500	25% Discount for BIS
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	25% Discount for BIS
4.4(Coefficient of Linear Expansion)	-	500	25% Discount for BIS
5.1(Density)	-	500	25% Discount for BIS
5.2(Coefficient of Linear Expansion)	-	500	25% Discount for BIS
14.2(a), 8.2.1(Sizes)	-	300	25% Discount for BIS
7(FREEDOM FROM DEFECTS)	-	0	-
6.2(zinc Purity)	-	750	25% Discount for BIS
9(Joint in wires)	-	0	-
6.1.1(Aluminum wires shall conform to IS 5484)	-	0	-
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	500	25% Discount for BIS
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	0	-
8.2.2(Calculated resistance)	-	750	25% Discount for BIS
Cl-9.2.5(Welded joint strength)	-	0	-
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires Before Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table 2(Diameter of Steel Wires Before Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires After Stranding)	-	300	25% Discount for BIS
8.1.1 & 13.2 Table 2(Diameter of Steel Wires After Stranding)	-	300	25% Discount for BIS
10(Stranding)	-	0	-
13.3 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	500	25% Discount for BIS
13.3 Table 2(Breaking Load of Steel Wires Before Stranding)	-	500	25% Discount for BIS
13.3 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	500	25% Discount for BIS
13.3 Table 2(Breaking Load of Steel Wires After Stranding)	-	500	25% Discount for BIS
13.4.1(Ductility by Torsion Test before stranding)	-	500	25% Discount for BIS
13.4.1(Ductility by Torsion Test before stranding)	-	500	25% Discount for BIS
13.4.1(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.4.1(Ductility by Torsion Test after stranding)	-	500	25% Discount for BIS
13.5.1(Wrapping Test Aluminium Wires Before Stranding)	-	300	25% Discount for BIS
13.5.1(Wrapping Test Aluminium Wires After Stranding)	-	300	25% Discount for BIS
13.5.2(Wrapping Test Galvanized Steel Wires Before Stranding)	-	300	25% Discount for BIS
13.5.2(Wrapping Test Galvanized Steel Wires After Stranding)	-	300	25% Discount for BIS
13.8 Table-4(Lay Ratio- Aluminium Wire Outermost Layer)	-	300	25% Discount for BIS
13.8 Table-4(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	300	25% Discount for BIS
13.8 Table-4(Lay Ratio- Steel Core (6 Wire Layer))	-	300	25% Discount for BIS
13.7(Galvanising test Dip test for uniformity of coating)	-	750	25% Discount for BIS
13.7(Weight of Zinc Coating [g/m²])	-	750	25% Discount for BIS
13.7(Weight of Zinc Coating [g/m²])	-	750	25% Discount for BIS
7.1(Freedom from Defects)	-	0	-
9(Joint in Wire)	-	0	-
13.8 Table-4(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	300	25% Discount for BIS
13.7(Galvanising test Dip test for uniformity of coating)	-	750	25% Discount for BIS

01 May, 2028

-
Included w.e.f 18.08.2025 Exclusion: Cl 13.9 (elec) (Surface condition test), Cl 13.10 (elec) (Ultimate breaking load) , Cl 13.11 (elec) (Stress-strain test)

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 398 : Part 5 (1992)

Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision)

COMPLETE

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 (elec)(Freedom from defects)	-	0	-
13.2 (mech)(Visual Examination)	-	0	-
13.3 Table-1 (mech)(Diameter-Aluminium wires)	-	100	-
13.3 Table-2 (mech)(Diameter-Galvanized Steel wires)	-	100	-
13.5.1 Table 3 (elec)(Breaking Load on Complete conductor)	-	500	-
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	500	-
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	500	-
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	500	-
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	500	-
13.6.1 (mech)(Ductility by Torsion Test before stranding)	-	500	-
13.6.1 (mech)(Ductility by Torsion Test after stranding)	-	500	-
13.6.2 (mech)(Ductility by Elongation Test before stranding)	-	500	-
13.6.2 (mech)(Ductility by Elongation Test after stranding)	-	500	-
13.7.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	0	-
13.7.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	0	-
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	0	-
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	0	-
13.8 (elec)(Resistance test-Aluminium wire before Stranding)	-	500	-
14.8 (elec)(Resistance test-Aluminium wire after stranding)	-	500	-
13.9.2 (chem)(Mass of Zinc coating)	-	500	-
13.9.2 (chem)(Uniformity of Zinc coating)	-	500	-
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	100	-
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	100	-
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-	100	-
13.4 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	100	-
13.10 (elec)(Surface condition test)	-	5000	-
10.4 (mech)(Direction of lay)	-	100	-
13.5.2 & Table 2 (mech)(Breaking load of steel wire before stranding)	-	100	-
13.9 (elec)(The test of galvanising)	-	100	-
8.2.1 (elec)(Size of complete conductor)	-	100	-
8.2.2 (elec)(Resistance of complete conductor)	-	100	-
10.4 (elec)(Direction of lay)	-	100	-
13.5.2 & Table 2 (elec)(Breaking load of steel wire before stranding)	-	100	-
13.4 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	100	-
13.4 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	100	-
13.4 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-	100	-
13.4 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	100	-
13.9.2 (elec)(Uniformity of Zinc coating)	-	100	-
13.9.2 (elec)(Mass of Zinc coating)	-	100	-
13.7.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	100	-
13.7.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	100	-
13.7.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	100	-
13.7.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	100	-
13.6.2 (elec)(Ductility by Elongation Test after stranding)	-	200	-
13.6.2 (elec)(Ductility by Elongation Test before stranding)	-	200	-
13.6.1 (elec)(Ductility by Torsion Test after stranding)	-	200	-
13.6.1 (elec)(Ductility by Torsion Test before stranding)	-	200	-
13.5.2 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	-
13.5.2 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	500	-
13.5.2 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	-
13.5.2 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	500	-
13.3 Table-2 (elec)(Diameter-Galvanized Steel wires)	-	500	-
13.3 Table-1 (elec)(Diameter-Aluminium wires)	-	500	-
13.2 (elec)(Visual Examination)	-	0	-
13.2(Visual Examination)	-	0	-
13.2(Visual Examination)	-	0	-
13.3(Diameter(mm), Aluminium wire)	-	200	-
13.3(Diameter(mm), Aluminium wire)	-	100	-
13.3(Diameter(mm), Steel Wire)	-	200	-
13.3(Diameter(mm), Steel Wire)	-	200	-
10(Stranding)	-	100	-
10(Stranding, Direction of Outermost layer)	-	100	-
10(Stranding, Ratio of diameter of Aluminium)	-	100	-
10.2, table 4(Lay Ratio, Aluminium Wire Outer of Layer)	-	100	-
10.2, table 4(Lay Ratio, Aluminium Wire, Layer immediately)	-	100	-
10.2, table 4(Lay Ratio, Aluminium Wire, Inner most layer of three Aluminium wire)	-	100	-
10.2, table 4(Lay Ratio, Steel wire, (6 wire layar))	-	100	-
13.5.2(Breaking Load, Aluminium wire(Before Stranding))	-	500	-
13.5.2(Breaking Load, Steel wire (Before Stranding))	-	500	-
13.5.2(Breaking Load Steel wire (After Stranding))	-	500	-
13.5.2(Breaking Load Aluminium wire (After Stranding))	-	500	-
13.6("Ductility Test on steel wire, Torsion Test ")	-	500	-
13.6(Ductility Test on steel wire, Torsion Test)	-	500	-
13.6(Ductility Test on steel wire, Elongation Test)	-	500	-
13.6(Ductility Test on steel wire, Elongation Test)	-	500	-
13.7(Wrapping Test, Aluminium wire)	-	0	-
13.7(Wrapping Test, Steel wire)	-	0	-
13.9(Galvanizing Test on steel wire, uniformity of coating)	-	500	-
13.9(Galvanizing Test on steel wire, uniformity of coating)	-	500	-
13.9(Galvanizing Test on steel wire,Weight of zinc coating)	-	500	-
13.9(Galvanizing Test on steel wire,Weight of zinc coating)	-	500	-
9(Joint in wires,)	-	0	-
9(Joint in wires,)	-	0	-
13.1(Surface Condition Test)	-	5000	-

11 Apr, 2028

-
Included w.e.f.16.07.2025

POWERONIC TEST & RESEARCH CENTRE PRIVATE LIMITED, GREATER NOIDA

8170206

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

COMPLETE

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	1000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	4000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	3000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	2000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.5, Table 2(Breaking Load Test - before stranding)	-	1000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.5, Table 2(Breaking Load Test - after stranding)	-	12000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.6, Table 1(Elongation Test - before stranding)	-	2000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.6, Table 1(Elongation Test - after stranding)	-	5000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.7, Table 2(Resistivity Test)	-	13000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.8(Wrapping Test)	-	5000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
11(Stranding)	-	3000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
8(Freedom from defects)	-	1000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	25000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	10000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-
16.11(Stress-strain Test)	-	40000	Up to 100 mm² = RS. 9000/- Above100 mm² to 200 mm² = RS. 95000/- Above 200 mm² to 276 mm² = RS. 115000/- Above 276 mm² to 744 mm² = RS. 135000/-

11 Apr, 2028

-
Included w.e.f 02.07.2025

Robust Testing Solutions Private Limited, Alwar

8173526

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

Aluminium Conductor for overhead Transmission Purposes.

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	1000	Type test: Rs. 15000/- (upto 100 sq. mm), Rs. 100000/- (150 sqmm to 200 sq. mm), Rs. 150000/-(400sqmm to 560 sq mm)
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	1000	Type test: Rs. 15000/- (upto 100 sq. mm), Rs. 100000/- (150 sqmm to 200 sq. mm), Rs. 150000/-(400sqmm to 560 sq mm)
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	1000	Type test: Rs. 15000/- (upto 100 sq. mm), Rs. 100000/- (150 sqmm to 200 sq. mm), Rs. 150000/-(400sqmm to 560 sq mm)
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	1000	Type test: Rs. 15000/- (upto 100 sq. mm), Rs. 100000/- (150 sqmm to 200 sq. mm), Rs. 150000/-(400sqmm to 560 sq mm)
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	Type test: Rs. 15000/- (upto 100 sq. mm), Rs. 100000/- (150 sqmm to 200 sq. mm), Rs. 150000/-(400sqmm to 560 sq mm)
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1000	Type test: Rs. 15000/- (upto 100 sq. mm), Rs. 100000/- (150 sqmm to 200 sq. mm), Rs. 150000/-(400sqmm to 560 sq mm)
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1000	Type test: Rs. 15000/- (upto 100 sq. mm), Rs. 100000/- (150 sqmm to 200 sq. mm), Rs. 150000/-(400sqmm to 560 sq mm)
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1000	Type test: Rs. 15000/- (upto 100 sq. mm), Rs. 100000/- (150 sqmm to 200 sq. mm), Rs. 150000/-(400sqmm to 560 sq mm)
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	Type test: Rs. 15000/- (upto 100 sq. mm), Rs. 100000/- (150 sqmm to 200 sq. mm), Rs. 150000/-(400sqmm to 560 sq mm)
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	Type test: Rs. 15000/- (upto 100 sq. mm), Rs. 100000/- (150 sqmm to 200 sq. mm), Rs. 150000/-(400sqmm to 560 sq mm)
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	500	10% Discount on BIS Testing
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	500	10% Discount on BIS Testing
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	500	10% Discount on BIS Testing
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	500	10% Discount on BIS Testing
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	500	10% Discount on BIS Testing
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	1000	10% Discount on BIS Testing
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	1000	10% Discount on BIS Testing
13.7.2 (elec)(Uniformity of Zinc coating)	-	2000	10% Discount on BIS Testing
13.7.2 (elec)(Mass of Zinc coating)	-	1500	10% Discount on BIS Testing
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	500	10% Discount on BIS Testing
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	500	10% Discount on BIS Testing
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	500	10% Discount on BIS Testing
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	500	10% Discount on BIS Testing
13.9 (elec)(Surface condition test)	-	25000	-
13.10 (elec)(Ultimate breaking load)	-	25000	-
13.11 (elec)(Stress-strain test)	-	25000	-

02 Aug, 2029

-
-

IEC TEST LABS LLP

8165726

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	2000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	2000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	2000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	2000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	2000	-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	2000	-
16.5, Table 2(Breaking Load Test - before stranding)	-	2000	-
16.5, Table 2(Breaking Load Test - after stranding)	-	3000	-
16.6, Table 1(Elongation Test - before stranding)	-	2000	-
16.6, Table 1(Elongation Test - after stranding)	-	3000	-
16.7, Table 2(Resistivity Test)	-	5000	-
16.8(Wrapping Test)	-	2000	-
11(Stranding)	-	2000	-
8(Freedom from defects)	-	2000	-
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	30000	-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	5000	-
16.11(Stress-strain Test)	-	100000	-
16.2(Visual Examination)	-	2000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	2000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	2000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	2000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	2000	-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	2000	-
16.5, Table 2(Breaking Load Test - before stranding)	-	3000	-
16.5, Table 2(Breaking Load Test - after stranding)	-	3000	-
16.6, Table 1(Elongation Test - before stranding)	-	3000	-
16.6, Table 1(Elongation Test - after stranding)	-	3000	-
16.7, Table 2(Resistivity Test)	-	5000	-
16.8(Wrapping Test)	-	3000	-
11(Stranding)	-	2000	-
8(Freedom from defects)	-	2000	-
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	30000	-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	5000	-
16.11(Stress-strain Test)	-	100000	-

07 Sep, 2026

-
Included w.e.f.27.06.2025

ATCC TEST LABS LLP

8172626

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	500	Rs. 7000/- for 7 strands, Rs. 10000/- for 19 strands, Rs. 12000/- for 37 strands and Rs. 15000/- for 61 strands
7.1 Table-1(Dimensional measurement of wires)	-	1000	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	1000	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	1000	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	1000	-
9.1(Stranding)	-	500	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	1000	-
9.3(Direction of Lay)	-	1000	-
9.4(Multiple layers of wires)	-	1000	-
11(Packing and Marking)	-	1000	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	2000	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	2000	-
12.3 Table 1(Elongation Test- Before Stranding)	-	1000	-
12.3 Table 1(Elongation Test- After Stranding)	-	1000	-
12.4 Table 1(Resistance of Aluminium wire)	-	2000	-
9.2(Lay Ratio 24 wire layer)	-	1000	-
9.2(Lay Ratio 18 wire layer)	-	1000	-
9.2(Lay Ratio 12 wire layer)	-	1000	-
9.2(Lay Ratio 3/6 wire layer)	-	1000	-
7.2.1(Sizes)	-	500	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	500	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	1000	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	1000	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	1000	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	1000	-
6.1(Freedom from Defects)	-	500	-
7.1 Table-1(Dimensional measurement of wires)	-	1000	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	1000	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	1000	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	1000	-
9.1(Stranding)	-	500	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	1000	-
9.3(Direction of Lay)	-	1000	-
9.4(Multiple layers of wires)	-	1000	-
11(Packing and Marking)	-	500	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	2000	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	2000	-
12.3 Table 1(Elongation Test- Before Stranding)	-	1000	-
12.3 Table 1(Elongation Test- After Stranding)	-	1000	-
12.4 Table 1(Resistance of Aluminium wire)	-	2000	-
9.2(Lay Ratio 24 wire layer)	-	1000	-
9.2(Lay Ratio 18 wire layer)	-	1000	-
9.2(Lay Ratio 12 wire layer)	-	1000	-
9.2(Lay Ratio 3/6 wire layer)	-	1000	-
7.2.1(Sizes)	-	1000	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	1000	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	1000	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	1000	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	1000	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	1000	-
6.1(Freedom from Defects)	-	500	-
7.1 Table-1(Dimensional measurement of wires)	-	2000	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	2000	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	1000	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	1000	-
9.1(Stranding)	-	500	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	1000	-
9.3(Direction of Lay)	-	1000	-
9.4(Multiple layers of wires)	-	1000	-
11(Packing and Marking)	-	500	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1000	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	2000	-
12.3 Table 1(Elongation Test- Before Stranding)	-	1000	-
12.3 Table 1(Elongation Test- After Stranding)	-	2000	-
12.4 Table 1(Resistance of Aluminium wire)	-	2000	-
9.2(Lay Ratio 24 wire layer)	-	1000	-
9.2(Lay Ratio 18 wire layer)	-	1000	-
9.2(Lay Ratio 12 wire layer)	-	1000	-
9.2(Lay Ratio 3/6 wire layer)	-	1000	-
7.2.1(Sizes)	-	1000	-
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	1000	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	1000	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	1000	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	1000	-
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	1000	-

15 Jun, 2026

-
included w.e.f.18.06.2025

ATCC TEST LABS LLP

8172626

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	1000	-
10 (elec)(Stranding)	-	500	-
10 (elec)(Stranding)	-	500	-
10 (elec)(Stranding)	-	500	-
10 (mech)(Stranding)	-	500	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	1000	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	1000	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	1000	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	1000	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	1000	-
13.7.2 (chem)(Mass of Zinc coating)	-	1000	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.9 (elec)(Surface condition test)	-	1000	-
13.10 (elec)(Ultimate breaking load)	-	1000	-
13.11 (elec)(Stress-strain test)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	1000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	1000	-
10 (elec)(Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1000	-
4.1(Resistivity)	-	1000	-
4.2(Density)	-	1000	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	-
4.4(Coefficient of Linear Expansion)	-	1000	-
5.1(Density)	-	1000	-
5.2(Coefficient of Linear Expansion)	-	1000	-
7(FREEDOM FROM DEFECTS)	-	1000	-
14.2(a), 8.2.1(Sizes)	-	1000	-
6.2(zinc Purity)	-	1000	-
9(Joint in wires)	-	1000	-
6.1.1(Aluminum wires shall conform to IS 5484)	-	1000	-
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	1000	-
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	1000	-
8.2.2(Calculated resistance)	-	1000	-
Cl-9.2.5(Welded joint strength)	-	1000	-
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table 2(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2(Diameter of Steel Wires After Stranding)	-	1000	-
10(Stranding)	-	1000	-
13.3 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	1000	-
13.3 Table 2(Breaking Load of Steel Wires Before Stranding)	-	1000	-
13.3 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	1000	-
13.3 Table 2(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.4.1(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1(Ductility by Torsion Test after stranding)	-	1000	-
13.5.1(Wrapping Test Aluminium Wires Before Stranding)	-	1000	-
13.5.1(Wrapping Test Aluminium Wires After Stranding)	-	1000	-
13.5.2(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.2(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.8 Table-4(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.8 Table-4(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.7(Galvanising test Dip test for uniformity of coating)	-	1000	-
13.7(Galvanising test Dip test for uniformity of coating)	-	1000	-
13.7(Weight of Zinc Coating [g/m²])	-	1000	-
13.7(Weight of Zinc Coating [g/m²])	-	1000	-
7.1(Freedom from Defects)	-	1000	-
9(Joint in Wire)	-	1000	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	1000	-
10 (elec)(Stranding)	-	500	-
10 (elec)(Stranding)	-	500	-
10 (elec)(Stranding)	-	500	-
10 (mech)(Stranding)	-	500	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	1000	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	1000	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	1000	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	1000	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	1000	-
13.7.2 (chem)(Mass of Zinc coating)	-	1000	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.9 (elec)(Surface condition test)	-	25000	-
13.10 (elec)(Ultimate breaking load)	-	25000	-
13.11 (elec)(Stress-strain test)	-	50000	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	1000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	1000	-
10 (elec)(Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1000	-
4.1(Resistivity)	-	1000	-
4.2(Density)	-	1000	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	1000	-
4.4(Coefficient of Linear Expansion)	-	1000	-
5.1(Density)	-	1000	-
5.2(Coefficient of Linear Expansion)	-	1000	-
7(FREEDOM FROM DEFECTS)	-	1000	-
14.2(a), 8.2.1(Sizes)	-	500	-
6.2(zinc Purity)	-	2000	-
9(Joint in wires)	-	1000	-
6.1.1(Aluminum wires shall conform to IS 5484)	-	1000	-
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	1000	-
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	1000	-
8.2.2(Calculated resistance)	-	1000	-
Cl-9.2.5(Welded joint strength)	-	1000	-
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table 2(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2(Diameter of Steel Wires After Stranding)	-	1000	-
10(Stranding)	-	500	-
13.3 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	1000	-
13.3 Table 2(Breaking Load of Steel Wires Before Stranding)	-	1000	-
13.3 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	1000	-
13.3 Table 2(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.4.1(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1(Ductility by Torsion Test after stranding)	-	1000	-
13.5.1(Wrapping Test Aluminium Wires Before Stranding)	-	1000	-
13.5.1(Wrapping Test Aluminium Wires After Stranding)	-	1000	-
13.5.2(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.2(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.8 Table-4(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.8 Table-4(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.7(Galvanising test Dip test for uniformity of coating)	-	1000	-
13.7(Galvanising test Dip test for uniformity of coating)	-	1000	-
13.7(Weight of Zinc Coating [g/m²])	-	1000	-
13.7(Weight of Zinc Coating [g/m²])	-	1000	-
7.1(Freedom from Defects)	-	1000	-
9(Joint in Wire)	-	1000	-

15 Jun, 2026

-
Included w.e.f.10.07.2025 Exclusion Cl 13.9 (elec) (Surface condition test) Cl 13.10 (elec) (Ultimate breaking load) Cl 13.11 (elec) (Stress-strain test)

Robust Testing Solutions Private Limited, Alwar

8173526

IS 398 : Part 5 (1992)

Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision)

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 (elec)(Freedom from defects)	-	0	-
13.2 (mech)(Visual Examination)	-	0	-
13.3 Table-1 (mech)(Diameter-Aluminium wires)	-	1000	-
13.3 Table-2 (mech)(Diameter-Galvanized Steel wires)	-	1000	-
13.5.1 Table 3 (elec)(Breaking Load on Complete conductor)	-	1500	-
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1500	-
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	0	-
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	0	-
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	0	-
13.6.1 (mech)(Ductility by Torsion Test before stranding)	-	1000	-
13.6.1 (mech)(Ductility by Torsion Test after stranding)	-	0	-
13.6.2 (mech)(Ductility by Elongation Test before stranding)	-	1000	-
13.6.2 (mech)(Ductility by Elongation Test after stranding)	-	0	-
13.7.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	-
13.7.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	0	-
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	0	-
13.8 (elec)(Resistance test-Aluminium wire before Stranding)	-	2000	-
14.8 (elec)(Resistance test-Aluminium wire after stranding)	-	0	-
13.9.2 (chem)(Mass of Zinc coating)	-	1500	-
13.9.2 (chem)(Uniformity of Zinc coating)	-	1000	-
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-	1000	-
13.4 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.10 (elec)(Surface condition test)	-	5000	-
10.4 (mech)(Direction of lay)	-	0	-
13.5.2 & Table 2 (mech)(Breaking load of steel wire before stranding)	-	0	-
13.9 (elec)(The test of galvanising)	-	1500	-
8.2.1 (elec)(Size of complete conductor)	-	500	-
8.2.2 (elec)(Resistance of complete conductor)	-	1000	-
10.4 (elec)(Direction of lay)	-	0	-
13.5.2 & Table 2 (elec)(Breaking load of steel wire before stranding)	-	1500	-
13.4 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	0	-
13.4 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	0	-
13.4 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-	0	-
13.4 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	0	-
13.9.2 (elec)(Uniformity of Zinc coating)	-	1500	-
13.9.2 (elec)(Mass of Zinc coating)	-	1500	-
13.7.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	500	-
13.7.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	500	-
13.7.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	500	-
13.7.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	500	-
13.6.2 (elec)(Ductility by Elongation Test after stranding)	-	0	-
13.6.2 (elec)(Ductility by Elongation Test before stranding)	-	0	-
13.6.1 (elec)(Ductility by Torsion Test after stranding)	-	0	-
13.6.1 (elec)(Ductility by Torsion Test before stranding)	-	0	-
13.5.2 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	0	-
13.5.2 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	0	-
13.5.2 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	0	-
13.5.2 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	0	-
13.3 Table-2 (elec)(Diameter-Galvanized Steel wires)	-	0	-
13.3 Table-1 (elec)(Diameter-Aluminium wires)	-	0	-
13.2 (elec)(Visual Examination)	-	0	-
13.2(Visual Examination)	-	0	-
13.2(Visual Examination)	-	0	-
13.3(Diameter(mm), Aluminium wire)	-	0	-
13.3(Diameter(mm), Aluminium wire)	-	0	-
13.3(Diameter(mm), Steel Wire)	-	0	-
13.3(Diameter(mm), Steel Wire)	-	0	-
10(Stranding)	-	0	-
10(Stranding, Direction of Outermost layer)	-	0	-
10(Stranding, Ratio of diameter of Aluminium)	-	0	-
10.2, table 4(Lay Ratio, Aluminium Wire Outer of Layer)	-	0	-
10.2, table 4(Lay Ratio, Aluminium Wire, Layer immediately)	-	0	-
10.2, table 4(Lay Ratio, Aluminium Wire, Inner most layer of three Aluminium wire)	-	0	-
10.2, table 4(Lay Ratio, Steel wire, (6 wire layar))	-	0	-
13.5.2(Breaking Load, Aluminium wire(Before Stranding))	-	500	-
13.5.2(Breaking Load, Steel wire (Before Stranding))	-	500	-
13.5.2(Breaking Load Steel wire (After Stranding))	-	500	-
13.5.2(Breaking Load Aluminium wire (After Stranding))	-	500	-
13.6("Ductility Test on steel wire, Torsion Test ")	-	500	-
13.6(Ductility Test on steel wire, Torsion Test)	-	500	-
13.6(Ductility Test on steel wire, Elongation Test)	-	500	-
13.6(Ductility Test on steel wire, Elongation Test)	-	500	-
13.7(Wrapping Test, Aluminium wire)	-	500	-
13.7(Wrapping Test, Steel wire)	-	500	-
13.9(Galvanizing Test on steel wire, uniformity of coating)	-	1500	-
13.9(Galvanizing Test on steel wire, uniformity of coating)	-	1500	-
13.9(Galvanizing Test on steel wire,Weight of zinc coating)	-	1500	-
13.9(Galvanizing Test on steel wire,Weight of zinc coating)	-	1500	-
9(Joint in wires,)	-	500	-
9(Joint in wires,)	-	500	-
13.1(Surface Condition Test)	-	5000	-

02 Aug, 2029

-
Included w.e.f 04.06.2025 Exclusion: Cl 13.11 Corona Test, Cl 13.12 Radio Interference Voltage Test

Robust Testing Solutions Private Limited, Alwar

8173526

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	1000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	12000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.5, Table 2(Breaking Load Test - before stranding)	-	2000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.5, Table 2(Breaking Load Test - after stranding)	-	15000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.6, Table 1(Elongation Test - before stranding)	-	2000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.6, Table 1(Elongation Test - after stranding)	-	5000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.7, Table 2(Resistivity Test)	-	13000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.8(Wrapping Test)	-	5000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
11(Stranding)	-	3000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
8(Freedom from defects)	-	2000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	25000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	15000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.11(Stress-strain Test)	-	40000	Up to 100 mm² = RS. 10000/- Above100 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-

02 Aug, 2029

-
Included w.e.f 04.06.2025

Ghaziabad Testing Laboratories Pvt Ltd, Ghaziabad

8125006

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 Table-1(Dimensional measurement of wires)	-	2500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2 Table 3(Lay Ratio of stranded conductors)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.2 Table 1(Breaking Load Test- After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.3 Table 1(Elongation Test- Before Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.3 Table 1(Elongation Test- After Stranding)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
12.4 Table 1(Resistance of Aluminium wire)	-	2500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 24 wire layer)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 18 wire layer)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 12 wire layer)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
9.2(Lay Ratio 3/6 wire layer)	-	800	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	1500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	500	GST @ 18% will be charged extra as applicable presently any change by the Govt either increase or decrease will be charged extra

30 Sep, 2027

-
-

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number