| 1 |
NATIONAL TEST HOUSE-SR (NTH), Chennai
| 6122704
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
- |
10500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Chemical Composition) |
- |
2500 |
|
Rs 4000/- with micro elements, Rs 2500/- without micro elements. |
| Cl 8(UTM) |
- |
3000 |
|
(i) Cl. 8.1, Tensile Test, Rs 3000 |
| Cl. 8.3 Table 6(Hardness Test
( Only for CR0 & CR1)) |
- |
2000 |
|
Included in complete test charges. |
| Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
3000 |
|
Additional charges not included in complete test charges. |
| Cl. 8.5
Table 5A, 5B & 5C(Plastic Strain Ratio
(r bar/r-90)) |
- |
3000 |
|
Additional charges not included in complete test charges. |
| Cl. 8.6
Table 5A, 5B & 5C(Tensile Strain Hardening Component
(n-Value)) |
- |
3000 |
|
Additional charges not included in complete test charges. |
| Cl. 8.7(Bake Hardening Index) |
- |
3000 |
|
Additional charges not included in complete test charges. |
| Cl 10(Workmanship) |
- |
1000 |
|
- |
| Cl 9(Workmanship) |
- |
4000 |
|
Additional charges (i) Cl. 9.3, Strain Ageing, Test Fee, Rs 3000.00, (ii) Cl. 9.5, Surface Finish, Test Fee, Rs 1000.00 |
| Cl. 9 Table 8(Surface roughness) |
- |
1000 |
|
- |
|
28 Nov, 2028 |
-
- |
| 2 |
NATIONAL TEST HOUSE-SR (NTH), Chennai
| 6122704
| IS 513 : Part 2 (2016) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
- |
8500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 9(Workmanship) |
- |
1000 |
|
- |
| Cl 7(UTM) |
- |
3000 |
|
- |
| Cl. 7.2 Table 7(Bend Test) |
- |
1000 |
|
- |
| Cl 10(Length, Width & Thickness) |
- |
1000 |
|
- |
| Cl. 7.3 Table 4A & 4B(Tensile Strain Hardening) |
- |
3000 |
|
Additional Charges |
| Cl. 8.5.3 Table 6(Surface Roughness) |
- |
1000 |
|
Additional Charges |
|
28 Nov, 2028 |
-
- |
| 3 |
QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED
| 5197006
| IS 513_1 (2016) |
Cold reduced low carbon steel sheets and strips |
Cold Rolled Steel Sheets & Strips |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8.5(Workmanship) |
- |
500 |
|
- |
| 11(Dimensions & tolerances) |
- |
500 |
|
- |
| 13.1(Marking) |
- |
500 |
|
- |
| 13.1(Marking) |
- |
500 |
|
- |
| 7.0 & table 3(Chromium as Cr) |
- |
500 |
|
- |
| 7.0 & table 3(Nickel as Ni) |
- |
500 |
|
- |
| 7.0 & table 3(Niobium as Nb) |
- |
500 |
|
- |
| 7.0 & table 3(Vanadium as V) |
- |
500 |
|
- |
| 7.0 & table 3(Titanium as Ti) |
- |
500 |
|
- |
| 7.0 & table 3(Molybdenum as Mp) |
- |
500 |
|
- |
| 7.0 & table 3(Boron as B) |
- |
500 |
|
- |
| 7.0 & table 3(Calcium as Ca) |
- |
500 |
|
- |
| 8.2(Erichson cupping test - IS 10175 for CR2, CR3, CR4 Grades from 0.5 - 2.0 mm Thickness) |
- |
10000 |
|
- |
| 8.3(Rockwell Hardness test -HRB - IS:1586) |
- |
1000 |
|
- |
| 8.5(Plastic strain ratio - IS: 11999) |
- |
1000 |
|
- |
| 8.6(Tensile strain hardening component - IS 15756) |
- |
1000 |
|
- |
| 9.5.3(Surface Roughness) |
- |
1000 |
|
- |
| 9.6(Oiling) |
- |
500 |
|
- |
| 10(FREEDOM FROM DEFECTS) |
- |
500 |
|
- |
| 11(Width - SOP MT-23) |
- |
500 |
|
- |
| 11(Thickness - SOP MT-23) |
- |
500 |
|
- |
| 5(Non-ageing Characteritics) |
- |
1000 |
|
- |
| 9(Freedom from defects) |
- |
500 |
|
- |
| 12(Marking and Packing) |
- |
500 |
|
- |
| 5(Non-ageing Characteritics) |
- |
1000 |
|
- |
|
- |
-
Included w.e.f 16.03.2026 |
| 4 |
QUALITY INTERNATIONAL RESEARCH & LABORATORIES PRIVATE LIMITED
| 5197006
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
Cold Rolled Sheet, Strips |
12500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Chemical Composition) |
- |
500 |
|
- |
| 8(Mechanical and Physical Properties) |
- |
2500 |
|
- |
| Cl 8(UTM) |
- |
2500 |
|
- |
| Cl 9(Workmanship) |
- |
500 |
|
- |
| Cl 9.6(Workmanship) |
- |
500 |
|
- |
| Cl 10(Workmanship) |
- |
500 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
500 |
|
- |
| Cl 8(UTM) |
- |
2500 |
|
- |
| Cl 9.5(Workmanship) |
- |
500 |
|
- |
| Cl 9.6(Workmanship) |
- |
500 |
|
- |
| Cl 10(Workmanship) |
- |
500 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
500 |
|
- |
| Cl 8(UTM) |
- |
2500 |
|
- |
| Cl 9(Workmanship) |
- |
500 |
|
- |
| Cl 9.6(Workmanship) |
- |
500 |
|
- |
| Cl 10(Workmanship) |
- |
500 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
500 |
|
- |
| 7.0(ALUMINIUM) |
- |
500 |
|
- |
| 7.0(MICRO ALLOYS) |
- |
500 |
|
- |
| 7.0(NITROGEN) |
- |
2500 |
|
- |
| 7.0(SILICON) |
- |
500 |
|
- |
| 7.0(MANGANESE) |
- |
500 |
|
- |
| 7.0(PHOSPHORUS) |
- |
500 |
|
- |
| 7.0(SULPHUR) |
- |
500 |
|
- |
| 7.0(CARBON) |
- |
500 |
|
- |
| Cl. 11(Out of square) |
- |
500 |
|
- |
| Cl. 11(Flatness) |
- |
500 |
|
- |
| Cl. 11(Camber) |
- |
500 |
|
- |
| Cl. 11(Width) |
- |
500 |
|
- |
| Cl. 11(Thickness) |
- |
500 |
|
- |
| Cl. 8.7(Bake Hardening Index) |
- |
2500 |
|
- |
| Cl. 8.6
Table 5A, 5B & 5C(Tensile Strain Hardening Component
(n-Value)) |
- |
2500 |
|
- |
| Cl. 8.5
Table 5A, 5B & 5C(Plastic Strain Ratio
(r bar/r-90)) |
- |
2500 |
|
- |
| Cl. 8.4(Bend Test) |
- |
500 |
|
- |
| Cl. 8.3 Table 6(Hardness Test
( Only for CR0 & CR1)) |
- |
1000 |
|
- |
| Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
1000 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 80 mm gauge length) |
- |
1000 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 50 mm gauge length) |
- |
1000 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Yield Stress) |
- |
1000 |
|
- |
| Cl. 9 Table 8(Surface roughness) |
- |
1000 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
500 |
|
- |
| Cl 10(Workmanship) |
- |
500 |
|
- |
| Cl 9.6(Workmanship) |
- |
500 |
|
- |
| Cl 9(Workmanship) |
- |
500 |
|
- |
| Cl 8(UTM) |
- |
2500 |
|
- |
| Cl 8(UTM) |
- |
2500 |
|
- |
| Cl 9(Workmanship) |
- |
500 |
|
- |
| Cl 9.6(Workmanship) |
- |
500 |
|
- |
| Cl 10(Workmanship) |
- |
500 |
|
- |
| Cl 11(Thickness (08)) |
- |
500 |
|
- |
| Cl 7(UTM) |
- |
2500 |
|
- |
| 8.1(Mechanical) |
- |
2500 |
|
- |
| 8.2(Cupping test) |
- |
1000 |
|
- |
| 8.3(Hardness HRB/HV) |
- |
1000 |
|
- |
| 8.4(Bend Test) |
- |
500 |
|
- |
| 8.5(Plastic strain ratio) |
- |
1000 |
|
- |
| 8.6(Tensile strain Hardening component) |
- |
1000 |
|
- |
| 8.7(Black Hardening Index) |
- |
1000 |
|
- |
| 9(Surface finish) |
- |
500 |
|
- |
| 10(Freedom from defects) |
- |
500 |
|
- |
| 13(Marking) |
- |
500 |
|
- |
| Cl. 7.3(Carbon) |
- |
500 |
|
- |
| Cl. 7.3(Manganese) |
- |
500 |
|
- |
| Cl. 7.3(Suphur) |
- |
500 |
|
- |
| Cl. 7.3(Phosphorus) |
- |
500 |
|
- |
| Cl. 7.3(Silicon) |
- |
500 |
|
- |
| CL 11.0(Width (04)) |
- |
500 |
|
- |
| Cl 7.1 table 3(Chromium) |
- |
500 |
|
- |
| Cl 7.1 table 3(Nickel) |
- |
500 |
|
- |
| Cl 7.1 table 3(Calcium) |
- |
500 |
|
- |
| Cl 7.1 table 3(Niobium) |
- |
500 |
|
- |
| Cl 7.1 table 3(Vanadium) |
- |
500 |
|
- |
| Cl 7.1 table 3(Titanium) |
- |
500 |
|
- |
| Cl 7.1 table 3(Boron) |
- |
500 |
|
- |
| Cl 7.1 table 3(Molybdenum) |
- |
500 |
|
- |
| Cl 7.1 table 3(Calcium) |
- |
500 |
|
- |
|
- |
-
included w.e.f 09.03.2026 |
| 5 |
National Institute of secondary steel technology
| 9135004
| IS 513 : Part 2 (2016) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
ALL GRADES ALL SIZE ALL DESIGNATION AVAILABLE |
9500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7(UTM) |
- |
1500 |
|
- |
| Cl 10(Length, Width & Thickness) |
- |
500 |
|
- |
| Cl 8.5(Workmanship) |
- |
500 |
|
- |
| 6.0(NITROGEN) |
- |
2000 |
|
- |
| 6.0(CARBON) |
- |
1000 |
|
- |
| 6.0(SILICON) |
- |
1000 |
|
- |
| 6.0(MANGANESE) |
- |
1000 |
|
- |
| 6.0(SULPHUR) |
- |
1000 |
|
- |
| 6.0(PHOSPHORUS) |
- |
1000 |
|
- |
|
24 Oct, 2028 |
-
- |
| 6 |
National Institute of secondary steel technology
| 9135004
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
All Grades/ All Sizes/All Designation |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 10(Workmanship) |
- |
1500 |
|
- |
| Cl 8(UTM) |
- |
1500 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
500 |
|
- |
| 7.0(CARBON) |
- |
1000 |
|
- |
| 7.0(NITROGEN) |
- |
2000 |
|
- |
| 7.0(SILICON) |
- |
1000 |
|
- |
| 7.0(MANGANESE) |
- |
1000 |
|
- |
| 7.0(PHOSPHORUS) |
- |
1000 |
|
- |
| 7.0(SULPHUR) |
- |
1000 |
|
- |
| 8(Mechanical and Physical Properties) |
- |
1500 |
|
- |
|
24 Oct, 2028 |
-
- |
| 7 |
Bharat Test House Pvt. Ltd. 1668 Sonipat
| 9168306
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
- |
7500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Chemical Composition) |
- |
500 |
|
- |
| 8(Mechanical and Physical Properties) |
- |
0 |
|
- |
| Cl 8(UTM) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
500 |
|
- |
| Cl 8(UTM) |
- |
0 |
|
- |
| Cl 9.5(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
0 |
|
- |
| Cl 8(UTM) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
0 |
|
- |
| 7.0(ALUMINIUM) |
- |
0 |
|
- |
| 7.0(MICRO ALLOYS) |
- |
0 |
|
- |
| 7.0(NITROGEN) |
- |
0 |
|
- |
| 7.0(SILICON) |
- |
500 |
|
- |
| 7.0(MANGANESE) |
- |
500 |
|
- |
| 7.0(PHOSPHORUS) |
- |
500 |
|
- |
| 7.0(SULPHUR) |
- |
500 |
|
- |
| 7.0(CARBON) |
- |
500 |
|
- |
| Cl. 11(Out of square) |
- |
0 |
|
- |
| Cl. 11(Flatness) |
- |
0 |
|
- |
| Cl. 11(Camber) |
- |
0 |
|
- |
| Cl. 11(Width) |
- |
0 |
|
- |
| Cl. 11(Thickness) |
- |
0 |
|
- |
| Cl. 8.7(Bake Hardening Index) |
- |
400 |
|
- |
| Cl. 8.6
Table 5A, 5B & 5C(Tensile Strain Hardening Component
(n-Value)) |
- |
400 |
|
- |
| Cl. 8.5
Table 5A, 5B & 5C(Plastic Strain Ratio
(r bar/r-90)) |
- |
500 |
|
- |
| Cl. 8.4(Bend Test) |
- |
500 |
|
- |
| Cl. 8.3 Table 6(Hardness Test
( Only for CR0 & CR1)) |
- |
500 |
|
- |
| Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
500 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 80 mm gauge length) |
- |
400 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 50 mm gauge length) |
- |
0 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Yield Stress) |
- |
400 |
|
- |
| Cl. 9 Table 8(Surface roughness) |
- |
500 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 8(UTM) |
- |
0 |
|
- |
| Cl 8(UTM) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 11(Thickness (08)) |
- |
0 |
|
- |
| Cl 7(UTM) |
- |
0 |
|
- |
| 8.1(Mechanical) |
- |
0 |
|
- |
| 8.2(Cupping test) |
- |
0 |
|
- |
| 8.3(Hardness HRB/HV) |
- |
500 |
|
- |
| 8.4(Bend Test) |
- |
0 |
|
- |
| 8.5(Plastic strain ratio) |
- |
500 |
|
- |
| 8.6(Tensile strain Hardening component) |
- |
0 |
|
- |
| 8.7(Black Hardening Index) |
- |
400 |
|
- |
| 9(Surface finish) |
- |
0 |
|
- |
| 10(Freedom from defects) |
- |
200 |
|
- |
| 13(Marking) |
- |
200 |
|
- |
| Cl. 7.3(Carbon) |
- |
0 |
|
- |
| Cl. 7.3(Manganese) |
- |
0 |
|
- |
| Cl. 7.3(Suphur) |
- |
0 |
|
- |
| Cl. 7.3(Phosphorus) |
- |
0 |
|
- |
| Cl. 7.3(Silicon) |
- |
0 |
|
- |
|
26 Jul, 2027 |
-
Included w.e.f. 12.11.2025 |
| 8 |
Unique Test House LLP
| 9134536
| IS 513 : Part 2 (2016) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
ALL |
6800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7(UTM) |
- |
1000 |
|
... |
| Cl 8.5(Workmanship) |
- |
100 |
|
... |
| Cl 8.6(Workmanship) |
- |
100 |
|
... |
| Cl 9(Workmanship) |
- |
100 |
|
... |
| Cl 10(Length, Width & Thickness) |
- |
500 |
|
... |
| 6.0(ALUMINIUM) |
- |
700 |
|
... |
| 6.0(MICRO ALLOYS) |
- |
100 |
|
... |
| 6.0(NITROGEN) |
- |
4000 |
|
... |
| 6.0(SILICON) |
- |
700 |
|
... |
| 6.0(MANGANESE) |
- |
700 |
|
... |
| 6.0(PHOSPHORUS) |
- |
700 |
|
... |
| 6.0(SULPHUR) |
- |
700 |
|
... |
| 6.0(CARBON) |
- |
700 |
|
... |
| Cl. 10(Out of square) |
- |
100 |
|
... |
| Cl. 10(Flatness) |
- |
100 |
|
... |
| Cl. 10(Camber) |
- |
100 |
|
... |
| Cl. 10(Width (04)) |
- |
100 |
|
... |
| Cl. 10(Thickness (08)) |
- |
100 |
|
.... |
| Cl. 8.5.3 Table 6(Surface Roughness) |
- |
500 |
|
.... |
| Cl. 7.3 Table 4A & 4B(Tensile Strain Hardening) |
- |
1000 |
|
... |
| Cl. 7.2 Table 7(Bend Test) |
- |
500 |
|
... |
| Cl 10(Length, Width & Thickness) |
- |
200 |
|
.... |
|
07 Sep, 2028 |
-
- |
| 9 |
Unique Test House LLP
| 9134536
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
ALL |
8500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8(Mechanical and Physical Properties) |
- |
100 |
|
.... |
| Cl 8(UTM) |
- |
1000 |
|
.... |
| Cl 9(Workmanship) |
- |
200 |
|
.... |
| Cl 9.6(Workmanship) |
- |
200 |
|
.... |
| Cl 10(Workmanship) |
- |
200 |
|
.... |
| Cl 11(Length, Width & Thickness) |
- |
500 |
|
.... |
| 7.0(ALUMINIUM) |
- |
800 |
|
.... |
| 7.0(MICRO ALLOYS) |
- |
800 |
|
.... |
| 7.0(NITROGEN) |
- |
800 |
|
... |
| 7.0(SILICON) |
- |
800 |
|
... |
| 7.0(MANGANESE) |
- |
800 |
|
... |
| 7.0(PHOSPHORUS) |
- |
800 |
|
... |
| 7.0(SULPHUR) |
- |
800 |
|
... |
| 7.0(CARBON) |
- |
800 |
|
... |
|
07 Sep, 2028 |
-
- |
| 10 |
National Test House (WR) - NTH, Mumbai
| 7107604
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
Genral Purpose CR0, 1,2,3,4,5 and all new designations |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.0(ALUMINIUM) |
- |
500 |
|
- |
| 7.0(MICRO ALLOYS) |
- |
500 |
|
- |
| 7.0(NITROGEN) |
- |
500 |
|
- |
| 7.0(SILICON) |
- |
500 |
|
- |
| 7.0(MANGANESE) |
- |
500 |
|
- |
| 7.0(PHOSPHORUS) |
- |
500 |
|
- |
| 7.0(SULPHUR) |
- |
500 |
|
- |
| 7.0(CARBON) |
- |
500 |
|
- |
| Cl 9(Workmanship) |
- |
500 |
|
- |
| Cl 8(UTM) |
- |
3000 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
1000 |
|
- |
| Cl 9.6(Workmanship) |
- |
500 |
|
- |
| Cl 10(Workmanship) |
- |
500 |
|
- |
| Cl. 8.7(Bake Hardening Index) |
- |
3000 |
|
- |
| Cl. 8.6
Table 5A, 5B & 5C(Tensile Strain Hardening Component
(n-Value)) |
- |
3000 |
|
- |
| Cl. 8.5
Table 5A, 5B & 5C(Plastic Strain Ratio
(r bar/r-90)) |
- |
3000 |
|
- |
| Cl. 8.4(Bend Test) |
- |
1500 |
|
- |
| Cl. 8.3 Table 6(Hardness Test
( Only for CR0 & CR1)) |
- |
2000 |
|
- |
| Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
1500 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 80 mm gauge length) |
- |
1000 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 50 mm gauge length) |
- |
1000 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Yield Stress) |
- |
1000 |
|
- |
|
- |
-
- |
| 11 |
PAAM Testing Labs Private Limited, Greater Noida
| 8185506
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
- |
6500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Chemical Composition) |
- |
5000 |
|
- |
| 8(Mechanical and Physical Properties) |
- |
5000 |
|
- |
| Cl 8(UTM) |
- |
1000 |
|
- |
| Cl 9(Workmanship) |
- |
100 |
|
- |
| Cl 9.6(Workmanship) |
- |
100 |
|
- |
| Cl 10(Workmanship) |
- |
100 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
1000 |
|
- |
| Cl 8(UTM) |
- |
1000 |
|
- |
| Cl 9.5(Workmanship) |
- |
100 |
|
- |
| Cl 9.6(Workmanship) |
- |
100 |
|
- |
| Cl 10(Workmanship) |
- |
100 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
1000 |
|
- |
| Cl 8(UTM) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
0 |
|
- |
| 7.0(ALUMINIUM) |
- |
500 |
|
- |
| 7.0(MICRO ALLOYS) |
- |
2500 |
|
- |
| 7.0(NITROGEN) |
- |
1000 |
|
- |
| 7.0(SILICON) |
- |
500 |
|
- |
| 7.0(MANGANESE) |
- |
500 |
|
- |
| 7.0(PHOSPHORUS) |
- |
500 |
|
- |
| 7.0(SULPHUR) |
- |
500 |
|
- |
| 7.0(CARBON) |
- |
500 |
|
- |
| Cl. 11(Out of square) |
- |
100 |
|
- |
| Cl. 11(Flatness) |
- |
100 |
|
- |
| Cl. 11(Camber) |
- |
100 |
|
- |
| Cl. 11(Width) |
- |
100 |
|
- |
| Cl. 11(Thickness) |
- |
500 |
|
- |
| Cl. 8.7(Bake Hardening Index) |
- |
800 |
|
- |
| Cl. 8.6
Table 5A, 5B & 5C(Tensile Strain Hardening Component
(n-Value)) |
- |
800 |
|
- |
| Cl. 8.5
Table 5A, 5B & 5C(Plastic Strain Ratio
(r bar/r-90)) |
- |
800 |
|
- |
| Cl. 8.4(Bend Test) |
- |
800 |
|
- |
| Cl. 8.3 Table 6(Hardness Test
( Only for CR0 & CR1)) |
- |
1000 |
|
- |
| Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
1000 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 80 mm gauge length) |
- |
1000 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 50 mm gauge length) |
- |
1000 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Yield Stress) |
- |
1000 |
|
- |
| Cl. 9 Table 8(Surface roughness) |
- |
1000 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
1000 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 8(UTM) |
- |
0 |
|
- |
| Cl 8(UTM) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 11(Thickness (08)) |
- |
0 |
|
- |
| Cl 7(UTM) |
- |
0 |
|
- |
| 8.1(Mechanical) |
- |
0 |
|
- |
| 8.2(Cupping test) |
- |
0 |
|
- |
| 8.3(Hardness HRB/HV) |
- |
0 |
|
- |
| 8.4(Bend Test) |
- |
0 |
|
- |
| 8.5(Plastic strain ratio) |
- |
0 |
|
- |
| 8.6(Tensile strain Hardening component) |
- |
0 |
|
- |
| 8.7(Black Hardening Index) |
- |
0 |
|
- |
| 9(Surface finish) |
- |
0 |
|
- |
| 10(Freedom from defects) |
- |
100 |
|
- |
| 13(Marking) |
- |
100 |
|
- |
| Cl. 7.3(Carbon) |
- |
0 |
|
- |
| Cl. 7.3(Manganese) |
- |
0 |
|
- |
| Cl. 7.3(Suphur) |
- |
0 |
|
- |
| Cl. 7.3(Phosphorus) |
- |
0 |
|
- |
| Cl. 7.3(Silicon) |
- |
500 |
|
- |
|
08 May, 2028 |
-
- |
| 12 |
National Test House (WR) - NTH, Mumbai
| 7107604
| IS 513 : Part 2 (2016) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
All ISC Grades and product range up to 3.00 mm |
7500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7(UTM) |
- |
3000 |
|
NA |
| Cl. 7.2 Table 7(Bend Test) |
- |
1000 |
|
NA |
| Cl 9(Workmanship) |
- |
1000 |
|
NA |
| Cl 10(Length, Width & Thickness) |
- |
1000 |
|
NA |
| 8.2(Erichson cupping test - IS 10175 for CR2, CR3, CR4 Grades from 0.5 - 2.0 mm Thickness) |
- |
1500 |
|
- |
| 8.3(Rockwell Hardness test -HRB - IS:1586) |
- |
2000 |
|
- |
| 7.3(Tensile strain hardening component - IS 15756) |
- |
3000 |
|
- |
| 9(Freedom from defects) |
- |
1000 |
|
- |
| 6.0(CARBON) |
- |
500 |
|
- |
| 6.0(MANGANESE) |
- |
500 |
|
- |
| 6.0(SILICON) |
- |
500 |
|
- |
| 6.0(SULPHUR) |
- |
500 |
|
- |
| 6.0(PHOSPHORUS) |
- |
500 |
|
- |
| 6.0(MICRO ALLOYS) |
- |
500 |
|
- |
| 6.0(ALUMINIUM) |
- |
500 |
|
- |
| 6.0(NITROGEN) |
- |
500 |
|
- |
|
- |
-
- |
| 13 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
- |
7000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Chemical Composition) |
- |
7000 |
|
For complete testing |
| 8(Mechanical and Physical Properties) |
- |
7000 |
|
For complete testing |
| Cl 8(UTM) |
- |
7000 |
|
For complete testing |
| Cl 9(Workmanship) |
- |
7000 |
|
For complete testing |
| Cl 9.6(Workmanship) |
- |
7000 |
|
For complete testing |
| Cl 10(Workmanship) |
- |
7000 |
|
For complete testing |
| Cl 11(Length, Width & Thickness) |
- |
7000 |
|
For complete testing |
| Cl 8(UTM) |
- |
7000 |
|
For complete testing |
| Cl 9.5(Workmanship) |
- |
7000 |
|
For complete testing |
| Cl 9.6(Workmanship) |
- |
7000 |
|
For complete testing |
| Cl 10(Workmanship) |
- |
7000 |
|
For complete testing |
| Cl 11(Length, Width & Thickness) |
- |
7000 |
|
For complete testing |
| Cl 8(UTM) |
- |
7000 |
|
For complete testing |
| Cl 9(Workmanship) |
- |
7000 |
|
For complete testing |
| Cl 9.6(Workmanship) |
- |
7000 |
|
For complete testing |
| Cl 10(Workmanship) |
- |
7000 |
|
For complete testing |
| Cl 11(Length, Width & Thickness) |
- |
7000 |
|
For complete testing |
| 7.0(ALUMINIUM) |
- |
7000 |
|
For complete testing |
| 7.0(MICRO ALLOYS) |
- |
7000 |
|
For complete testing |
| 7.0(NITROGEN) |
- |
7000 |
|
For complete testing |
| 7.0(SILICON) |
- |
7000 |
|
For complete testing |
| 7.0(MANGANESE) |
- |
7000 |
|
For complete testing |
| 7.0(PHOSPHORUS) |
- |
7000 |
|
For complete testing |
| 7.0(SULPHUR) |
- |
7000 |
|
For complete testing |
| 7.0(CARBON) |
- |
7000 |
|
For complete testing |
| Cl. 11(Out of square) |
- |
7000 |
|
For complete testing |
| Cl. 11(Flatness) |
- |
7000 |
|
For complete testing |
| Cl. 11(Camber) |
- |
7000 |
|
For complete testing |
| Cl. 11(Width) |
- |
7000 |
|
For complete testing |
| Cl. 11(Thickness) |
- |
7000 |
|
For complete testing |
| Cl. 8.7(Bake Hardening Index) |
- |
7000 |
|
For complete testing |
| Cl. 8.6
Table 5A, 5B & 5C(Tensile Strain Hardening Component
(n-Value)) |
- |
7000 |
|
For complete testing |
| Cl. 8.5
Table 5A, 5B & 5C(Plastic Strain Ratio
(r bar/r-90)) |
- |
7000 |
|
For complete testing |
| Cl. 8.4(Bend Test) |
- |
7000 |
|
For complete testing |
| Cl. 8.3 Table 6(Hardness Test
( Only for CR0 & CR1)) |
- |
7000 |
|
For complete testing |
| Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
7000 |
|
For complete testing |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 80 mm gauge length) |
- |
7000 |
|
For complete testing |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 50 mm gauge length) |
- |
7000 |
|
For complete testing |
| Cl. 8.1 & Table
5A, 5B & 5C(Yield Stress) |
- |
7000 |
|
For complete testing |
| Cl. 9 Table 8(Surface roughness) |
- |
7000 |
|
For complete testing |
| Cl 11(Length, Width & Thickness) |
- |
7000 |
|
For complete testing |
| Cl 10(Workmanship) |
- |
7000 |
|
For complete testing |
| Cl 9.6(Workmanship) |
- |
7000 |
|
For complete testing |
| Cl 9(Workmanship) |
- |
7000 |
|
For complete testing |
| Cl 8(UTM) |
- |
7000 |
|
For complete testing |
| Cl 8(UTM) |
- |
7000 |
|
For complete testing |
| Cl 9(Workmanship) |
- |
7000 |
|
For complete testing |
| Cl 9.6(Workmanship) |
- |
7000 |
|
For complete testing |
| Cl 10(Workmanship) |
- |
7000 |
|
For complete testing |
| Cl 11(Thickness (08)) |
- |
7000 |
|
For complete testing |
| Cl 7(UTM) |
- |
7000 |
|
For complete testing |
| 8.1(Mechanical) |
- |
7000 |
|
For complete testing |
| 8.2(Cupping test) |
- |
7000 |
|
For complete testing |
| 8.3(Hardness HRB/HV) |
- |
7000 |
|
For complete testing |
| 8.4(Bend Test) |
- |
7000 |
|
For complete testing |
| 8.5(Plastic strain ratio) |
- |
7000 |
|
For complete testing |
| 8.6(Tensile strain Hardening component) |
- |
7000 |
|
For complete testing |
| 8.7(Black Hardening Index) |
- |
7000 |
|
For complete testing |
| 9(Surface finish) |
- |
7000 |
|
For complete testing |
| 10(Freedom from defects) |
- |
7000 |
|
For complete testing |
| 13(Marking) |
- |
7000 |
|
For complete testing |
| Cl. 7.3(Carbon) |
- |
7000 |
|
For complete testing |
| Cl. 7.3(Manganese) |
- |
7000 |
|
For complete testing |
| Cl. 7.3(Suphur) |
- |
7000 |
|
For complete testing |
| Cl. 7.3(Phosphorus) |
- |
7000 |
|
For complete testing |
| Cl. 7.3(Silicon) |
- |
7000 |
|
For complete testing |
|
- |
-
Included w.e.f.21.05.2025 |
| 14 |
LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD
| 6121636
| IS 513 : Part 2 (2016) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
- |
8500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0(CARBON) |
- |
500 |
|
- |
| 6.0(MANGANESE) |
- |
500 |
|
- |
| 6.0(SULPHUR) |
- |
500 |
|
- |
| 6.0(PHOSPHORUS) |
- |
500 |
|
- |
| 6.0(SILICON) |
- |
250 |
|
- |
| 6.0(ALUMINIUM) |
- |
250 |
|
- |
| 6.0(MICRO ALLOYS) |
- |
500 |
|
- |
| 6.0(NITROGEN) |
- |
1500 |
|
- |
| Cl 7(UTM) |
- |
1500 |
|
- |
| Cl 8.5(Workmanship) |
- |
500 |
|
- |
| Cl 8.6(Workmanship) |
- |
500 |
|
- |
| Cl 9(Workmanship) |
- |
500 |
|
- |
| Cl 10(Length, Width & Thickness) |
- |
1000 |
|
- |
|
19 Apr, 2028 |
-
- |
| 15 |
LUCID LABORATORIES PRIVATE LIMITED, HYDERABAD
| 6121636
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
- |
8500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.0(CARBON) |
- |
0 |
|
- |
| 7.0(SULPHUR) |
- |
0 |
|
- |
| 7.0(PHOSPHORUS) |
- |
0 |
|
- |
| 7.0(MANGANESE) |
- |
0 |
|
- |
| 7.0(SILICON) |
- |
0 |
|
- |
| 7.0(NITROGEN) |
- |
0 |
|
- |
| 7.0(ALUMINIUM) |
- |
0 |
|
- |
| 7.0(MICRO ALLOYS) |
- |
0 |
|
- |
| Cl 8(UTM) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
0 |
|
- |
|
19 Apr, 2028 |
-
- |
| 16 |
Gravitas Laboratories Private Limited, Greater Noida
| 8182606
| IS 513 : Part 2 (2016) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
- |
12500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7(UTM) |
- |
1200 |
|
- |
| Cl 8.5(Workmanship) |
- |
500 |
|
- |
| Cl 8.6(Workmanship) |
- |
500 |
|
- |
| Cl 9(Workmanship) |
- |
500 |
|
- |
| Cl 10(Length, Width & Thickness) |
- |
500 |
|
- |
| Cl 7(UTM) |
- |
1200 |
|
- |
| Cl 8.5(Workmanship) |
- |
500 |
|
- |
| Cl 8.6(Workmanship) |
- |
500 |
|
- |
| Cl 9(Workmanship) |
- |
500 |
|
- |
| Cl 10(Length, Width & Thickness) |
- |
500 |
|
- |
| Cl 7(UTM) |
- |
1200 |
|
- |
| Cl 8.5(Workmanship) |
- |
500 |
|
- |
| Cl 8.6(Workmanship) |
- |
500 |
|
- |
| Cl 9(Workmanship) |
- |
500 |
|
- |
| Cl 10(Length, Width & Thickness) |
- |
500 |
|
- |
| 6.0(ALUMINIUM) |
- |
500 |
|
- |
| 6.0(MICRO ALLOYS) |
- |
500 |
|
- |
| 6.0(NITROGEN) |
- |
500 |
|
- |
| 6.0(SILICON) |
- |
500 |
|
- |
| 6.0(MANGANESE) |
- |
500 |
|
- |
| 6.0(PHOSPHORUS) |
- |
500 |
|
- |
| 6.0(SULPHUR) |
- |
500 |
|
- |
| 6.0(CARBON) |
- |
500 |
|
- |
| Cl. 10(Out of square) |
- |
500 |
|
- |
| Cl. 10(Flatness) |
- |
500 |
|
- |
| Cl. 10(Camber) |
- |
500 |
|
- |
| Cl. 10(Width (04)) |
- |
500 |
|
- |
| Cl. 10(Thickness (08)) |
- |
500 |
|
- |
| Cl. 8.5.3 Table 6(Surface Roughness) |
- |
500 |
|
- |
| Cl. 7.3 Table 4A & 4B(Tensile Strain Hardening) |
- |
1500 |
|
- |
| Cl. 7.2 Table 7(Bend Test) |
- |
500 |
|
- |
| Cl 10(Length, Width & Thickness) |
- |
500 |
|
- |
| Cl 9(Workmanship) |
- |
500 |
|
- |
| Cl 8.6(Workmanship) |
- |
500 |
|
- |
| Cl 8.5(Workmanship) |
- |
500 |
|
- |
| Cl 7(UTM) |
- |
1500 |
|
- |
| Cl 7(UTM) |
- |
1500 |
|
- |
| Cl 8.5(Workmanship) |
- |
500 |
|
- |
| Cl 8.6(Workmanship) |
- |
500 |
|
- |
| Cl 9(Workmanship) |
- |
500 |
|
- |
| Cl 10(Length, Width & Thickness) |
- |
500 |
|
- |
| 7.0 & table 3(Chromium as Cr) |
- |
500 |
|
- |
| 7.0 & table 3(Nickel as Ni) |
- |
500 |
|
- |
| 7.0 & table 3(Niobium as Nb) |
- |
500 |
|
- |
| 7.0 & table 3(Vanadium as V) |
- |
500 |
|
- |
| 7.0 & table 3(Titanium as Ti) |
- |
500 |
|
- |
| 7.0 & table 3(Molybdenum as Mp) |
- |
500 |
|
- |
| 7.0 & table 3(Boron as B) |
- |
500 |
|
- |
| 7.0 & table 3(Calcium as Ca) |
- |
500 |
|
- |
| 7.2(Bend test - IS 1599) |
- |
500 |
|
- |
| 8.2(Erichson cupping test - IS 10175 for CR2, CR3, CR4 Grades from 0.5 - 2.0 mm Thickness) |
- |
500 |
|
- |
| 8.3(Rockwell Hardness test -HRB - IS:1586) |
- |
500 |
|
- |
| 7.3(Tensile strain hardening component - IS 15756) |
- |
500 |
|
- |
| 8.0(Surface Roughness) |
- |
500 |
|
- |
| 9(Freedom from defects) |
- |
500 |
|
- |
| Cl. 10(Out of square) |
- |
0 |
|
- |
| Cl. 10(Flatness) |
- |
0 |
|
- |
| Cl. 10(Camber) |
- |
0 |
|
- |
| Cl. 10(Width (04)) |
- |
0 |
|
- |
| Cl. 10(Thickness (08)) |
- |
0 |
|
- |
| Cl. 8.5.3 Table 6(Surface Roughness) |
- |
0 |
|
- |
| Cl. 7.3 Table 4A & 4B(Tensile Strain Hardening) |
- |
0 |
|
- |
| Cl. 7.2 Table 7(Bend Test) |
- |
0 |
|
- |
| Cl 10(Length, Width & Thickness) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 8.6(Workmanship) |
- |
0 |
|
- |
| Cl 8.5(Workmanship) |
- |
0 |
|
- |
| Cl 7(UTM) |
- |
0 |
|
- |
| Cl 7(UTM) |
- |
0 |
|
- |
| Cl 8.5(Workmanship) |
- |
0 |
|
- |
| Cl 8.6(Workmanship) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 10(Length, Width & Thickness) |
- |
0 |
|
- |
| 7.0 & table 3(Chromium as Cr) |
- |
0 |
|
- |
| 7.0 & table 3(Nickel as Ni) |
- |
0 |
|
- |
| 7.0 & table 3(Niobium as Nb) |
- |
0 |
|
- |
| 7.0 & table 3(Vanadium as V) |
- |
0 |
|
- |
| 7.0 & table 3(Titanium as Ti) |
- |
0 |
|
- |
| 7.0 & table 3(Molybdenum as Mp) |
- |
0 |
|
- |
| 7.0 & table 3(Boron as B) |
- |
0 |
|
- |
| 7.0 & table 3(Calcium as Ca) |
- |
0 |
|
- |
| 7.2(Bend test - IS 1599) |
- |
0 |
|
- |
| 7.3(Tensile strain hardening component - IS 15756) |
- |
0 |
|
- |
| 8.0(Surface Roughness) |
- |
0 |
|
- |
| 9(Freedom from defects) |
- |
0 |
|
- |
|
- |
-
Included w.e.f 02.06.2025 |
| 17 |
BUNITECH METALLURGICAL SERVICES PRIVATE LIMITED
| 7188906
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
Grade- ( CR0 to ISC440W), Thickness- (0.50 to 4.00 mm) |
14000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Chemical Composition) |
- |
2500 |
|
For BIS samples: 1.5 times of BIS testing charges, For others:Rs.14000.00 |
| 8(Mechanical and Physical Properties) |
- |
1500 |
|
- |
| Cl 8(UTM) |
- |
1500 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
100 |
|
- |
| Cl 8(UTM) |
- |
1500 |
|
- |
| Cl 9.5(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
100 |
|
- |
| Cl 8(UTM) |
- |
1500 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
100 |
|
- |
| 7.0(ALUMINIUM) |
- |
500 |
|
- |
| 7.0(MICRO ALLOYS) |
- |
500 |
|
- |
| 7.0(NITROGEN) |
- |
500 |
|
- |
| 7.0(SILICON) |
- |
500 |
|
- |
| 7.0(MANGANESE) |
- |
500 |
|
- |
| 7.0(PHOSPHORUS) |
- |
500 |
|
- |
| 7.0(SULPHUR) |
- |
500 |
|
- |
| 7.0(CARBON) |
- |
500 |
|
- |
| Cl. 11(Out of square) |
- |
200 |
|
- |
| Cl. 11(Flatness) |
- |
200 |
|
- |
| Cl. 11(Camber) |
- |
200 |
|
- |
| Cl. 11(Width) |
- |
200 |
|
- |
| Cl. 11(Thickness) |
- |
200 |
|
- |
| Cl. 8.7(Bake Hardening Index) |
- |
1000 |
|
- |
| Cl. 8.6
Table 5A, 5B & 5C(Tensile Strain Hardening Component
(n-Value)) |
- |
1000 |
|
- |
| Cl. 8.5
Table 5A, 5B & 5C(Plastic Strain Ratio
(r bar/r-90)) |
- |
1000 |
|
- |
| Cl. 8.4(Bend Test) |
- |
400 |
|
- |
| Cl. 8.3 Table 6(Hardness Test
( Only for CR0 & CR1)) |
- |
600 |
|
- |
| Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
300 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 80 mm gauge length) |
- |
1000 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 50 mm gauge length) |
- |
1000 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Yield Stress) |
- |
1000 |
|
- |
| Cl. 9 Table 8(Surface roughness) |
- |
300 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
100 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 8(UTM) |
- |
1000 |
|
- |
| Cl 8(UTM) |
- |
1000 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 11(Thickness (08)) |
- |
100 |
|
- |
| Cl 7(UTM) |
- |
1000 |
|
- |
| 8.1(Mechanical) |
- |
1000 |
|
- |
| 8.2(Cupping test) |
- |
300 |
|
- |
| 8.3(Hardness HRB/HV) |
- |
500 |
|
- |
| 8.4(Bend Test) |
- |
400 |
|
- |
| 8.5(Plastic strain ratio) |
- |
1000 |
|
- |
| 8.6(Tensile strain Hardening component) |
- |
1000 |
|
- |
| 8.7(Black Hardening Index) |
- |
1000 |
|
- |
| 9(Surface finish) |
- |
0 |
|
- |
| 10(Freedom from defects) |
- |
0 |
|
- |
| 13(Marking) |
- |
0 |
|
- |
| Cl. 7.3(Carbon) |
- |
500 |
|
- |
| Cl. 7.3(Manganese) |
- |
500 |
|
- |
| Cl. 7.3(Suphur) |
- |
500 |
|
- |
| Cl. 7.3(Phosphorus) |
- |
500 |
|
- |
| Cl. 7.3(Silicon) |
- |
500 |
|
- |
|
24 Oct, 2028 |
-
- |
| 18 |
Gravitas Laboratories Private Limited, Greater Noida
| 8182606
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
All sizes |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Chemical Composition) |
- |
7500 |
|
- |
| 8(Mechanical and Physical Properties) |
- |
7500 |
|
- |
| Cl 8(UTM) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
0 |
|
- |
| Cl 8(UTM) |
- |
0 |
|
- |
| Cl 9.5(Workmanship) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
0 |
|
- |
| Cl 8(UTM) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
0 |
|
- |
| 7.0(MICRO ALLOYS) |
- |
0 |
|
- |
| 7.0(ALUMINIUM) |
- |
0 |
|
- |
| 7.0(NITROGEN) |
- |
0 |
|
- |
| 7.0(SILICON) |
- |
0 |
|
- |
| 7.0(MANGANESE) |
- |
0 |
|
- |
| 7.0(PHOSPHORUS) |
- |
0 |
|
- |
| 7.0(SULPHUR) |
- |
0 |
|
- |
| 7.0(CARBON) |
- |
0 |
|
- |
| Cl. 11(Out of square) |
- |
0 |
|
- |
| Cl. 11(Flatness) |
- |
0 |
|
- |
| Cl. 11(Camber) |
- |
0 |
|
- |
| Cl. 11(Width) |
- |
0 |
|
- |
| Cl. 11(Thickness) |
- |
0 |
|
- |
| Cl. 8.7(Bake Hardening Index) |
- |
0 |
|
- |
| Cl. 8.6
Table 5A, 5B & 5C(Tensile Strain Hardening Component
(n-Value)) |
- |
0 |
|
- |
| Cl. 8.5
Table 5A, 5B & 5C(Plastic Strain Ratio
(r bar/r-90)) |
- |
0 |
|
- |
| Cl. 8.4(Bend Test) |
- |
0 |
|
- |
| Cl. 8.3 Table 6(Hardness Test
( Only for CR0 & CR1)) |
- |
0 |
|
- |
| Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
0 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 80 mm gauge length) |
- |
0 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 50 mm gauge length) |
- |
0 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Yield Stress) |
- |
0 |
|
- |
| Cl. 9 Table 8(Surface roughness) |
- |
0 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 8(UTM) |
- |
0 |
|
- |
| Cl 8(UTM) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 11(Thickness (08)) |
- |
0 |
|
- |
| Cl 7(UTM) |
- |
0 |
|
- |
| 8.1(Mechanical) |
- |
0 |
|
- |
| 8.2(Cupping test) |
- |
0 |
|
- |
| 8.3(Hardness HRB/HV) |
- |
0 |
|
- |
| 8.4(Bend Test) |
- |
0 |
|
- |
| 8.5(Plastic strain ratio) |
- |
0 |
|
- |
| 8.6(Tensile strain Hardening component) |
- |
0 |
|
- |
| 8.7(Black Hardening Index) |
- |
0 |
|
- |
| 10(Freedom from defects) |
- |
0 |
|
- |
| Cl. 7.3(Carbon) |
- |
0 |
|
- |
| Cl. 7.3(Manganese) |
- |
0 |
|
- |
| Cl. 7.3(Suphur) |
- |
0 |
|
- |
| Cl. 7.3(Phosphorus) |
- |
0 |
|
- |
| Cl. 7.3(Silicon) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| 9(Surface finish) |
- |
0 |
|
- |
| 7(Chemical Composition) |
- |
0 |
|
- |
| 8(Mechanical and Physical Properties) |
- |
0 |
|
- |
| Cl. 11(Out of square) |
- |
0 |
|
- |
| Cl. 11(Flatness) |
- |
0 |
|
- |
| Cl. 11(Camber) |
- |
0 |
|
- |
| Cl. 11(Width) |
- |
0 |
|
- |
| Cl. 11(Thickness) |
- |
0 |
|
- |
| Cl. 8.7(Bake Hardening Index) |
- |
0 |
|
- |
| Cl. 8.6
Table 5A, 5B & 5C(Tensile Strain Hardening Component
(n-Value)) |
- |
0 |
|
- |
| Cl. 8.5
Table 5A, 5B & 5C(Plastic Strain Ratio
(r bar/r-90)) |
- |
0 |
|
- |
| Cl. 8.4(Bend Test) |
- |
0 |
|
- |
| Cl. 8.3 Table 6(Hardness Test
( Only for CR0 & CR1)) |
- |
0 |
|
- |
| Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
0 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 80 mm gauge length) |
- |
0 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 50 mm gauge length) |
- |
0 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Yield Stress) |
- |
0 |
|
- |
| Cl. 9 Table 8(Surface roughness) |
- |
0 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 8(UTM) |
- |
0 |
|
- |
| Cl 8(UTM) |
- |
0 |
|
- |
| Cl 10(Workmanship) |
- |
0 |
|
- |
| Cl 11(Thickness (08)) |
- |
0 |
|
- |
| Cl 7(UTM) |
- |
0 |
|
- |
| 8.1(Mechanical) |
- |
0 |
|
- |
| 8.2(Cupping test) |
- |
0 |
|
- |
| 8.3(Hardness HRB/HV) |
- |
0 |
|
- |
| 8.4(Bend Test) |
- |
0 |
|
- |
| 8.5(Plastic strain ratio) |
- |
0 |
|
- |
| 8.6(Tensile strain Hardening component) |
- |
0 |
|
- |
| 8.7(Black Hardening Index) |
- |
0 |
|
- |
| 10(Freedom from defects) |
- |
0 |
|
- |
| Cl. 7.3(Carbon) |
- |
0 |
|
- |
| Cl. 7.3(Manganese) |
- |
0 |
|
- |
| Cl. 7.3(Suphur) |
- |
0 |
|
- |
| Cl. 7.3(Phosphorus) |
- |
0 |
|
- |
| Cl. 7.3(Silicon) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 9(Workmanship) |
- |
0 |
|
- |
| Cl 9.6(Workmanship) |
- |
0 |
|
- |
| 9(Surface finish) |
- |
0 |
|
- |
|
- |
-
Included w.e.f 11.07.2025 |
| 19 |
YORLAB LLP
| 7188606
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
- |
8800 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7(Chemical Composition) |
- |
8800 |
|
- |
| 8(Mechanical and Physical Properties) |
- |
8800 |
|
- |
| Cl 8(UTM) |
- |
8800 |
|
- |
| Cl 9(Workmanship) |
- |
8800 |
|
- |
| Cl 9.6(Workmanship) |
- |
8800 |
|
- |
| Cl 10(Workmanship) |
- |
8800 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
8800 |
|
- |
| Cl 8(UTM) |
- |
8800 |
|
- |
| Cl 9.5(Workmanship) |
- |
8800 |
|
- |
| Cl 9.6(Workmanship) |
- |
8800 |
|
- |
| Cl 10(Workmanship) |
- |
8800 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
8800 |
|
- |
| Cl 8(UTM) |
- |
8800 |
|
- |
| Cl 9(Workmanship) |
- |
8800 |
|
- |
| Cl 9.6(Workmanship) |
- |
8800 |
|
- |
| Cl 10(Workmanship) |
- |
8800 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
8800 |
|
- |
| 7.0(ALUMINIUM) |
- |
8800 |
|
- |
| 7.0(MICRO ALLOYS) |
- |
8800 |
|
- |
| 7.0(NITROGEN) |
- |
8800 |
|
- |
| 7.0(SILICON) |
- |
8800 |
|
- |
| 7.0(MANGANESE) |
- |
8800 |
|
- |
| 7.0(PHOSPHORUS) |
- |
8800 |
|
- |
| 7.0(SULPHUR) |
- |
8800 |
|
- |
| 7.0(CARBON) |
- |
8800 |
|
- |
| Cl. 11(Out of square) |
- |
8800 |
|
- |
| Cl. 11(Flatness) |
- |
8800 |
|
- |
| Cl. 11(Camber) |
- |
8800 |
|
- |
| Cl. 11(Width) |
- |
8800 |
|
- |
| Cl. 11(Thickness) |
- |
8800 |
|
- |
| Cl. 8.7(Bake Hardening Index) |
- |
8800 |
|
- |
| Cl. 8.6
Table 5A, 5B & 5C(Tensile Strain Hardening Component
(n-Value)) |
- |
8800 |
|
- |
| Cl. 8.5
Table 5A, 5B & 5C(Plastic Strain Ratio
(r bar/r-90)) |
- |
8800 |
|
- |
| Cl. 8.4(Bend Test) |
- |
8800 |
|
- |
| Cl. 8.3 Table 6(Hardness Test
( Only for CR0 & CR1)) |
- |
8800 |
|
- |
| Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
8800 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 80 mm gauge length) |
- |
8800 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 50 mm gauge length) |
- |
8800 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Yield Stress) |
- |
8800 |
|
- |
| Cl. 9 Table 8(Surface roughness) |
- |
8800 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
8800 |
|
- |
| Cl 10(Workmanship) |
- |
8800 |
|
- |
| Cl 9.6(Workmanship) |
- |
8800 |
|
- |
| Cl 9(Workmanship) |
- |
8800 |
|
- |
| Cl 8(UTM) |
- |
8800 |
|
- |
| Cl 8(UTM) |
- |
8800 |
|
- |
| Cl 9(Workmanship) |
- |
8800 |
|
- |
| Cl 9.6(Workmanship) |
- |
8800 |
|
- |
| Cl 10(Workmanship) |
- |
8800 |
|
- |
| Cl 11(Thickness (08)) |
- |
8800 |
|
- |
| Cl 7(UTM) |
- |
8800 |
|
- |
| 8.1(Mechanical) |
- |
8800 |
|
- |
| 8.2(Cupping test) |
- |
8800 |
|
- |
| 8.3(Hardness HRB/HV) |
- |
8800 |
|
- |
| 8.4(Bend Test) |
- |
8800 |
|
- |
| 8.5(Plastic strain ratio) |
- |
8800 |
|
- |
| 8.6(Tensile strain Hardening component) |
- |
8800 |
|
- |
| 8.7(Black Hardening Index) |
- |
8800 |
|
- |
| 9(Surface finish) |
- |
8800 |
|
- |
| 10(Freedom from defects) |
- |
8800 |
|
- |
| 13(Marking) |
- |
8800 |
|
- |
| Cl. 7.3(Carbon) |
- |
8800 |
|
- |
| Cl. 7.3(Manganese) |
- |
8800 |
|
- |
| Cl. 7.3(Suphur) |
- |
8800 |
|
- |
| Cl. 7.3(Phosphorus) |
- |
8800 |
|
- |
| Cl. 7.3(Silicon) |
- |
8800 |
|
- |
|
- |
-
- |
| 20 |
MSME-TESTING STATION, KOLHAPUR
| 7179134
| IS 513_1 (2016) |
Cold reduced low carbon steel sheets and strips |
CR0, CR1, CR2, CR3, CR4, CR5 & all |
1400 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.3(Rockwell Hardness test -HRB - IS:1586) |
- |
900 |
|
- |
| 11(Thickness - SOP MT-23) |
- |
500 |
|
- |
|
30 Jul, 2027 |
-
For mechanical parameters only
For Thickness and Rockwell Hardness test only |
| 21 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 513_1 (2016) |
Cold reduced low carbon steel sheets and strips |
- |
7000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8.5(Workmanship) |
- |
1000 |
|
For complete Cl 5,8.5,10,11,12,13.1 |
| 11(Dimensions & tolerances) |
- |
5000 |
|
For complete Mechanical Test |
| 13.1(Marking) |
- |
0 |
|
For complete Cl 5,8.5,10,11,12,13.1 |
| 7.0 & table 3(Chromium as Cr) |
- |
2000 |
|
For complete Chemical Test |
| 7.0 & table 3(Nickel as Ni) |
- |
2000 |
|
For complete Chemical Test |
| 7.0 & table 3(Niobium as Nb) |
- |
2000 |
|
For complete Chemical Test |
| 7.0 & table 3(Vanadium as V) |
- |
2000 |
|
For complete Chemical Test |
| 7.0 & table 3(Titanium as Ti) |
- |
2000 |
|
For complete Chemical Test |
| 7.0 & table 3(Molybdenum as Mp) |
- |
2000 |
|
For complete Chemical Test |
| 7.0 & table 3(Boron as B) |
- |
2000 |
|
For complete Chemical Test |
| 7.0 & table 3(Calcium as Ca) |
- |
2000 |
|
For complete Chemical Test |
| 8.2(Erichson cupping test - IS 10175 for CR2, CR3, CR4 Grades from 0.5 - 2.0 mm Thickness) |
- |
5000 |
|
For complete Mechanical tests |
| 8.3(Rockwell Hardness test -HRB - IS:1586) |
- |
5000 |
|
For complete Mechanical Test |
| 8.5(Plastic strain ratio - IS: 11999) |
- |
5000 |
|
For complete Mechanical Test |
| 8.6(Tensile strain hardening component - IS 15756) |
- |
5000 |
|
For complete Mechanical Test |
| 9.5.3(Surface Roughness) |
- |
5000 |
|
For complete Mechanical Test |
| 9.6(Oiling) |
- |
2000 |
|
For complete Mechanical tests |
| 10(FREEDOM FROM DEFECTS) |
- |
0 |
|
For complete Cl 5,8.5,10,11,12,13.1 |
| 11(Width - SOP MT-23) |
- |
5000 |
|
For complete Mechanical tests |
| 11(Thickness - SOP MT-23) |
- |
5000 |
|
For complete Mechanical tests |
| 5(Non-ageing Characteritics) |
- |
5000 |
|
For complete Mechanical tests |
| 12(Marking and Packing) |
- |
0 |
|
For complete Cl 5,8.5,10,11,12,13.1 |
|
- |
-
Included w.e.f. 06-07-2023. |
| 22 |
JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR
| 9164606
| IS 513 : Part 2 (2016) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
- |
7000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7(UTM) |
- |
5000 |
|
For complete Mechanical tests |
| Cl 8.5(Workmanship) |
- |
5000 |
|
For complete Mechanical tests |
| Cl 8.6(Workmanship) |
- |
5000 |
|
For complete Mechanical tests |
| Cl 9(Workmanship) |
- |
5000 |
|
For complete Mechanical tests |
| Cl 10(Length, Width & Thickness) |
- |
5000 |
|
For complete Mechanical tests |
| 6.0(ALUMINIUM) |
- |
2000 |
|
For complete Mechanical tests |
| 6.0(MICRO ALLOYS) |
- |
2000 |
|
For complete Mechanical tests |
| 6.0(NITROGEN) |
- |
2000 |
|
For complete Mechanical tests |
| 6.0(SILICON) |
- |
2000 |
|
For complete Mechanical tests |
| 6.0(MANGANESE) |
- |
2000 |
|
For complete Mechanical tests |
| 6.0(PHOSPHORUS) |
- |
2000 |
|
For complete Mechanical tests |
| 6.0(SULPHUR) |
- |
2000 |
|
For Complete Chemical Test |
| 6.0(CARBON) |
- |
2000 |
|
For Complete Chemical Test |
| Cl. 10(Out of square) |
- |
5000 |
|
For complete mechanical test |
| Cl. 10(Flatness) |
- |
5000 |
|
For complete mechanical test |
| Cl. 10(Camber) |
- |
5000 |
|
For complete mechanical test |
| Cl. 10(Width (04)) |
- |
5000 |
|
For complete mechanical test |
| Cl. 10(Thickness (08)) |
- |
5000 |
|
For complete mechanical test |
| Cl. 8.5.3 Table 6(Surface Roughness) |
- |
5000 |
|
For complete mechanical test |
| Cl. 7.3 Table 4A & 4B(Tensile Strain Hardening) |
- |
5000 |
|
For complete mechanical test |
| Cl. 7.2 Table 7(Bend Test) |
- |
5000 |
|
For complete mechanical test |
| 7.0 & table 3(Chromium as Cr) |
- |
2000 |
|
For Complete Chemical Test |
| 7.0 & table 3(Nickel as Ni) |
- |
2000 |
|
For Complete Chemical Test |
| 7.0 & table 3(Niobium as Nb) |
- |
2000 |
|
For Complete Chemical Test |
| 7.0 & table 3(Vanadium as V) |
- |
2000 |
|
For Complete Chemical Test |
| 7.0 & table 3(Titanium as Ti) |
- |
2000 |
|
For Complete Chemical Test |
| 7.0 & table 3(Molybdenum as Mp) |
- |
2000 |
|
For Complete Chemical Test |
| 7.0 & table 3(Boron as B) |
- |
2000 |
|
For Complete Chemical Test |
| 7.0 & table 3(Calcium as Ca) |
- |
2000 |
|
For Complete Chemical Test |
| 7.2(Bend test - IS 1599) |
- |
5000 |
|
For complete mechanical test |
| 8.2(Erichson cupping test - IS 10175 for CR2, CR3, CR4 Grades from 0.5 - 2.0 mm Thickness) |
- |
5000 |
|
For complete mechanical test |
| 8.3(Rockwell Hardness test -HRB - IS:1586) |
- |
50000 |
|
For complete mechanical test |
| 7.3(Tensile strain hardening component - IS 15756) |
- |
5000 |
|
For complete mechanical test |
| 8.0(Surface Roughness) |
- |
5000 |
|
For complete mechanical test |
| 8.6(Oiling) |
- |
0 |
|
- |
| 9(Freedom from defects) |
- |
0 |
|
- |
| 12(Marking and Packing) |
- |
0 |
|
- |
|
- |
-
Included w.e.f. 06-07-2023. |
| 23 |
TCR ENGINEERING SERVICES PVT.LTD., NAVI MUMBAI
| 7103506
| IS 513 : Part 2 (2016) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
- |
14880 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0(CARBON) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| 6.0(SULPHUR) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| 6.0(PHOSPHORUS) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| 6.0(MANGANESE) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| 6.0(SILICON) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| 6.0(ALUMINIUM) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| 6.0(NITROGEN) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| Cl 7(UTM) |
- |
10080 |
|
Tensile test 780/-
Bend test 300/-
Tensile strain hardening component 9000/- |
| Cl 8.5(Workmanship) |
- |
600 |
|
10 % Discount to BIS on total invoiced value |
| Cl 9(Workmanship) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| Cl 10(Length, Width & Thickness) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
|
31 Dec, 2026 |
-
- |
| 24 |
TCR ENGINEERING SERVICES PVT.LTD., NAVI MUMBAI
| 7103506
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
- |
28220 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.0(CARBON) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| 7.0(SULPHUR) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| 7.0(PHOSPHORUS) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| 7.0(MANGANESE) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| 7.0(SILICON) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| 7.0(ALUMINIUM) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| Cl 8(UTM) |
- |
780 |
|
10 % Discount to BIS on total invoiced value |
| Cl 9(Workmanship) |
- |
600 |
|
10 % Discount to BIS on total invoiced value |
| Cl 10(Workmanship) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| Cl 11(Length, Width & Thickness) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| 8(Mechanical and Physical Properties) |
- |
23420 |
|
10 % Discount to BIS on total invoiced value |
| 8.2(Cupping test) |
- |
540 |
|
10 % Discount to BIS on total invoiced value |
| Cl. 8.3 Table 6(Hardness Test
( Only for CR0 & CR1)) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| 8.4(Bend Test) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| 8.5(Plastic strain ratio) |
- |
9000 |
|
10 % Discount to BIS on total invoiced value |
| Cl. 8.6
Table 5A, 5B & 5C(Tensile Strain Hardening Component
(n-Value)) |
- |
9000 |
|
10 % Discount to BIS on total invoiced value |
| 8.7(Black Hardening Index) |
- |
3500 |
|
10 % Discount to BIS on total invoiced value |
| 7.0(MICRO ALLOYS) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
| 7.0(NITROGEN) |
- |
300 |
|
10 % Discount to BIS on total invoiced value |
|
31 Dec, 2026 |
-
- |
| 25 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 513 : Part 2 (2016) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
All TYpe |
9500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7(UTM) |
- |
1500 |
|
- |
| Cl 8.5(Workmanship) |
- |
300 |
|
- |
| Cl 8.6(Workmanship) |
- |
300 |
|
- |
| Cl 9(Workmanship) |
- |
300 |
|
- |
| Cl 10(Length, Width & Thickness) |
- |
900 |
|
- |
| 6.0(ALUMINIUM) |
- |
300 |
|
- |
| 6.0(MICRO ALLOYS) |
- |
900 |
|
- |
| 6.0(NITROGEN) |
- |
300 |
|
- |
| 6.0(SILICON) |
- |
300 |
|
- |
| 6.0(MANGANESE) |
- |
300 |
|
- |
| 6.0(PHOSPHORUS) |
- |
300 |
|
- |
| 6.0(SULPHUR) |
- |
300 |
|
- |
| 6.0(CARBON) |
- |
300 |
|
- |
| Cl. 10(Out of square) |
- |
400 |
|
- |
| Cl. 10(Flatness) |
- |
400 |
|
- |
| Cl. 10(Camber) |
- |
500 |
|
- |
| Cl. 10(Width (04)) |
- |
300 |
|
- |
| Cl. 10(Thickness (08)) |
- |
300 |
|
- |
| Cl. 8.5.3 Table 6(Surface Roughness) |
- |
500 |
|
- |
| Cl. 7.3 Table 4A & 4B(Tensile Strain Hardening) |
- |
1500 |
|
- |
| Cl. 7.2 Table 7(Bend Test) |
- |
500 |
|
- |
| 7.0 & table 3(Chromium as Cr) |
- |
300 |
|
- |
| 7.0 & table 3(Nickel as Ni) |
- |
300 |
|
- |
| 7.0 & table 3(Niobium as Nb) |
- |
300 |
|
- |
| 7.0 & table 3(Vanadium as V) |
- |
300 |
|
- |
| 7.0 & table 3(Titanium as Ti) |
- |
300 |
|
- |
| 7.0 & table 3(Molybdenum as Mp) |
- |
300 |
|
- |
| 7.0 & table 3(Boron as B) |
- |
300 |
|
- |
| 7.0 & table 3(Calcium as Ca) |
- |
300 |
|
- |
| 8.2(Erichson cupping test - IS 10175 for CR2, CR3, CR4 Grades from 0.5 - 2.0 mm Thickness) |
- |
1000 |
|
- |
| 8.3(Rockwell Hardness test -HRB - IS:1586) |
- |
1500 |
|
- |
| 7.3(Tensile strain hardening component - IS 15756) |
- |
1500 |
|
- |
| 8.0(Surface Roughness) |
- |
500 |
|
- |
| 8.6(Oiling) |
- |
500 |
|
- |
| 9(Freedom from defects) |
- |
300 |
|
- |
| 12(Marking and Packing) |
- |
300 |
|
- |
|
10 Mar, 2030 |
-
- |
| 26 |
PIONEER TESTING LABORATORY PRIVATE LIMITED
| 8176806
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
All Type |
12750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 8(UTM) |
- |
1500 |
|
- |
| Cl 9(Workmanship) |
- |
300 |
|
- |
| Cl 9.6(Workmanship) |
- |
300 |
|
- |
| Cl 10(Workmanship) |
- |
300 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
900 |
|
- |
| 7.0(ALUMINIUM) |
- |
300 |
|
- |
| 7.0(MICRO ALLOYS) |
- |
1200 |
|
- |
| 7.0(NITROGEN) |
- |
400 |
|
- |
| 7.0(SILICON) |
- |
300 |
|
- |
| 7.0(MANGANESE) |
- |
300 |
|
- |
| 7.0(PHOSPHORUS) |
- |
300 |
|
- |
| 7.0(SULPHUR) |
- |
300 |
|
- |
| 7.0(CARBON) |
- |
300 |
|
- |
| Cl. 11(Out of square) |
- |
350 |
|
- |
| Cl. 11(Flatness) |
- |
350 |
|
- |
| Cl. 11(Camber) |
- |
500 |
|
- |
| Cl. 11(Width) |
- |
300 |
|
- |
| Cl. 11(Thickness) |
- |
300 |
|
- |
| Cl. 8.7(Bake Hardening Index) |
- |
500 |
|
- |
| Cl. 8.6
Table 5A, 5B & 5C(Tensile Strain Hardening Component
(n-Value)) |
- |
1000 |
|
- |
| Cl. 8.5
Table 5A, 5B & 5C(Plastic Strain Ratio
(r bar/r-90)) |
- |
1000 |
|
- |
| Cl. 8.4(Bend Test) |
- |
500 |
|
- |
| Cl. 8.3 Table 6(Hardness Test
( Only for CR0 & CR1)) |
- |
1200 |
|
- |
| Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
1500 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 80 mm gauge length) |
- |
1000 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 50 mm gauge length) |
- |
1000 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Yield Stress) |
- |
1000 |
|
- |
| Cl. 9 Table 8(Surface roughness) |
- |
350 |
|
- |
| 13(Marking) |
- |
200 |
|
- |
|
10 Mar, 2030 |
-
- |
| 27 |
Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar
| 9138706
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
- |
7500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.0(ALUMINIUM) |
- |
100 |
|
15% DISCOUNT TO BIS |
| 7.0(MICRO ALLOYS) |
- |
100 |
|
15% DISCOUNT TO BIS |
| 7.0(NITROGEN) |
- |
200 |
|
15% DISCOUNT TO BIS |
| 7.0(SILICON) |
- |
100 |
|
15% DISCOUNT TO BIS |
| 7.0(MANGANESE) |
- |
100 |
|
15% DISCOUNT TO BIS |
| 7.0(PHOSPHORUS) |
- |
100 |
|
15% DISCOUNT TO BIS |
| 7.0(SULPHUR) |
- |
100 |
|
15% DISCOUNT TO BIS |
| 7.0(CARBON) |
- |
200 |
|
15% DISCOUNT TO BIS |
| Cl. 11(Out of square) |
- |
100 |
|
15% DISCOUNT TO BIS |
| Cl. 11(Flatness) |
- |
100 |
|
15% DISCOUNT TO BIS |
| Cl. 11(Camber) |
- |
100 |
|
15% DISCOUNT TO BIS |
| Cl. 11(Width) |
- |
100 |
|
15% DISCOUNT TO BIS |
| Cl. 11(Thickness) |
- |
100 |
|
15% DISCOUNT TO BIS |
| Cl. 8.7(Bake Hardening Index) |
- |
150 |
|
15% DISCOUNT TO BIS |
| Cl. 8.6
Table 5A, 5B & 5C(Tensile Strain Hardening Component
(n-Value)) |
- |
150 |
|
15% DISCOUNT TO BIS |
| Cl. 8.5
Table 5A, 5B & 5C(Plastic Strain Ratio
(r bar/r-90)) |
- |
150 |
|
15% DISCOUNT TO BIS |
| Cl. 8.4(Bend Test) |
- |
940 |
|
15% DISCOUNT TO BIS |
| Cl. 8.3 Table 6(Hardness Test
( Only for CR0 & CR1)) |
- |
500 |
|
15% DISCOUNT TO BIS |
| Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
1000 |
|
15% DISCOUNT TO BIS |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 80 mm gauge length) |
- |
700 |
|
15% DISCOUNT TO BIS |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 50 mm gauge length) |
- |
700 |
|
15% DISCOUNT TO BIS |
| Cl. 8.1 & Table
5A, 5B & 5C(Yield Stress) |
- |
700 |
|
15% DISCOUNT TO BIS |
| Cl. 9 Table 8(Surface roughness) |
- |
500 |
|
15% DISCOUNT TO BIS |
| Cl 10(Workmanship) |
- |
250 |
|
15% DISCOUNT TO BIS |
| Cl 9.6(Workmanship) |
- |
250 |
|
15% DISCOUNT TO BIS |
| Cl. 11(Out of square) |
- |
100 |
|
15% DISCOUNT TO BIS |
| Cl. 11(Flatness) |
- |
100 |
|
15% DISCOUNT TO BIS |
| Cl. 11(Camber) |
- |
100 |
|
15% DISCOUNT TO BIS |
| Cl. 11(Width) |
- |
100 |
|
15% DISCOUNT TO BIS |
| Cl. 11(Thickness) |
- |
100 |
|
15% DISCOUNT TO BIS |
| Cl. 8.7(Bake Hardening Index) |
- |
150 |
|
15% DISCOUNT TO BIS |
| Cl. 8.6
Table 5A, 5B & 5C(Tensile Strain Hardening Component
(n-Value)) |
- |
150 |
|
15% DISCOUNT TO BIS |
| Cl. 8.5
Table 5A, 5B & 5C(Plastic Strain Ratio
(r bar/r-90)) |
- |
150 |
|
15% DISCOUNT TO BIS |
| Cl. 8.4(Bend Test) |
- |
940 |
|
15% DISCOUNT TO BIS |
| Cl. 8.3 Table 6(Hardness Test
( Only for CR0 & CR1)) |
- |
500 |
|
15% DISCOUNT TO BIS |
| Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
1000 |
|
15% DISCOUNT TO BIS |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 80 mm gauge length) |
- |
700 |
|
15% DISCOUNT TO BIS |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 50 mm gauge length) |
- |
700 |
|
15% DISCOUNT TO BIS |
| Cl. 8.1 & Table
5A, 5B & 5C(Yield Stress) |
- |
700 |
|
15% DISCOUNT TO BIS |
| Cl. 9 Table 8(Surface roughness) |
- |
500 |
|
15% DISCOUNT TO BIS |
| Cl 10(Workmanship) |
- |
250 |
|
15% DISCOUNT TO BIS |
| Cl 9.6(Workmanship) |
- |
250 |
|
15% DISCOUNT TO BIS |
|
31 Dec, 2029 |
-
Included w.e.f. 07.11.2023 |
| 28 |
MATERIAL TESTING LABORATORY LLP
| 8176306
| IS 513 : Part 2 (2016) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
All Grades |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0(CARBON) |
- |
250 |
|
- |
| 6.0(SULPHUR) |
- |
250 |
|
- |
| 6.0(PHOSPHORUS) |
- |
250 |
|
- |
| 6.0(MANGANESE) |
- |
250 |
|
- |
| 6.0(SILICON) |
- |
250 |
|
- |
| 6.0(MICRO ALLOYS) |
- |
0 |
|
- |
| 6.0(ALUMINIUM) |
- |
250 |
|
- |
| 6.0(NITROGEN) |
- |
500 |
|
- |
| Cl 7(UTM) |
- |
1500 |
|
- |
| Cl. 7.2 Table 7(Bend Test) |
- |
500 |
|
- |
| Cl 10(Length, Width & Thickness) |
- |
500 |
|
- |
| Cl. 8.5.3 Table 6(Surface Roughness) |
- |
1000 |
|
- |
| Cl. 7.3 Table 4A & 4B(Tensile Strain Hardening) |
- |
1000 |
|
- |
| 9(Freedom from defects) |
- |
500 |
|
- |
| 12(Marking and Packing) |
- |
500 |
|
- |
| 7.0 & table 3(Chromium as Cr) |
- |
250 |
|
- |
| 7.0 & table 3(Nickel as Ni) |
- |
250 |
|
- |
| 7.0 & table 3(Molybdenum as Mp) |
- |
250 |
|
- |
| 7.0 & table 3(Vanadium as V) |
- |
250 |
|
- |
| 7.0 & table 3(Titanium as Ti) |
- |
250 |
|
- |
| 7.0 & table 3(Niobium as Nb) |
- |
250 |
|
- |
| 7.0 & table 3(Boron as B) |
- |
250 |
|
- |
| 8.6(Oiling) |
- |
250 |
|
- |
| Cl. 10(Out of square) |
- |
250 |
|
- |
| Cl. 10(Flatness) |
- |
250 |
|
- |
| Cl. 10(Camber) |
- |
250 |
|
- |
|
- |
-
Scope restricted to Sheets and Strips thickness greater than or equal to 0.5 mm |
| 29 |
MATERIAL TESTING LABORATORY LLP
| 8176306
| IS 513 : Part 1 (2016) |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
All Grades |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.0(CARBON) |
- |
250 |
|
- |
| 7.0(SULPHUR) |
- |
250 |
|
- |
| 7.0(PHOSPHORUS) |
- |
250 |
|
- |
| 7.0(MANGANESE) |
- |
250 |
|
- |
| 7.0(SILICON) |
- |
250 |
|
- |
| 7(Chemical Composition) |
- |
0 |
|
- |
| 7.0(ALUMINIUM) |
- |
500 |
|
- |
| 7.0(NITROGEN) |
- |
500 |
|
- |
| Cl 8(UTM) |
- |
500 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Yield Stress) |
- |
500 |
|
- |
| Cl. 8.1 & Table
5A, 5B & 5C(Elongation at 50 mm gauge length) |
- |
500 |
|
- |
| Cl. 8.2(Cupping Test(Only for sheet and coils CR2, CR3, CR4(having thickness 0.5 mm-2.0 mm)) |
- |
1000 |
|
- |
| Cl. 8.3 Table 6(Hardness Test
( Only for CR0 & CR1)) |
- |
500 |
|
- |
| Cl. 8.4(Bend Test) |
- |
500 |
|
- |
| 7.0(MICRO ALLOYS) |
- |
2000 |
|
- |
| Cl 11(Length, Width & Thickness) |
- |
500 |
|
- |
| 8.5(Plastic strain ratio) |
- |
1000 |
|
- |
| 8.6(Tensile strain Hardening component) |
- |
1000 |
|
- |
| 8.7(Black Hardening Index) |
- |
1000 |
|
- |
| 9(Surface finish) |
- |
250 |
|
- |
| 10(Freedom from defects) |
- |
250 |
|
- |
| 13(Marking) |
- |
250 |
|
- |
| Cl. 11(Out of square) |
- |
250 |
|
- |
| Cl. 11(Flatness) |
- |
250 |
|
- |
| Cl. 11(Camber) |
- |
250 |
|
- |
|
- |
-
Scope Restricted to Sheets and Strips thickness greater than or equal to 0.5 mm, Grades all other than CR2, CR3, CR4, of thickness from 0.5 mm upto 2.0 mm, ISC390B, ISC360B, ISC320B, ISC300B, ISC270B, ISC340B and ISC440B. |
| 30 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 513 : Part 2 (2016) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
For all grades except the tests mentioned in remarks |
- View breakup
for Chemical Rs. 3750/-
Testing charges for each of the elements other than Table (Aluminum, Silicon, Nitrogen, Chromium,
Nickel, Niobium, Vanadium, Titanium, Molybdenum, Boron, Calcium & other) will be Rs.1004/-
For Mechanical Rs. 6900/-
Tensile Strain Hardening component, Bake
hardening and Surface finished test and Rs.1004/- for each of the elements other than carbon, sulphur,
phosphorus and manganese.
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0 (CARBON) |
- |
|
|
|
| 6.0 (SULPHUR) |
- |
|
|
|
| 6.0 (PHOSPHORUS) |
- |
|
|
|
| 6.0 (MANGANESE) |
- |
|
|
|
| 6.0 (SILICON) |
- |
|
|
|
| 6.0 (NITROGEN) |
- |
|
|
|
| Cl 7 (UTM) |
- |
|
|
|
| Cl 9 (Workmanship) |
- |
|
|
|
| Cl 10 (Length, Width & Thickness) |
- |
|
|
|
| 6.0 (ALUMINIUM) |
- |
|
|
|
| 8.2 (Erichson cupping test - IS 10175 for CR2, CR3, CR4 Grades from 0.5 - 2.0 mm Thickness) |
- |
|
|
|
| 8.3 (Rockwell Hardness test -HRB - IS:1586) |
- |
|
|
|
| 8.0 (Surface Roughness) |
- |
|
|
|
| Cl. 10 (Thickness (08)) |
- |
|
|
|
| Cl. 10 (Width (04)) |
- |
|
|
|
| 7.0 & table 3 (Boron as B) |
- |
|
|
|
| 7.0 & table 3 (Chromium as Cr) |
- |
|
|
|
| 7.0 & table 3 (Nickel as Ni) |
- |
|
|
|
| 7.0 & table 3 (Molybdenum as Mp) |
- |
|
|
|
| 7.0 & table 3 (Niobium as Nb) |
- |
|
|
|
| 7.0 & table 3 (Vanadium as V) |
- |
|
|
|
| 7.0 & table 3 (Titanium as Ti) |
- |
|
|
|
| 7.0 & table 3 (Calcium as Ca) |
- |
|
|
|
|
- |
-
Mech: Except Tensile Strain Hardening Component – n-Value |
