BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15324 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 9873 (Part 2) (2025)

SAFETY OF TOYS PART 2 FLAMMABILITY (Fourth Revision)

ALL

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General)	-	2000	-
4.2,4.2.2(a) -5.2(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude 50 mm or more from the surface of the toy))	-	2000	-
4.2,4.2.2(b) -5.2(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude 50 mm or more from the surface of the toy))	-	2000	-
4.2,4.2.3 -5.3(Toys to be worn on the head (Beards,moustaches,wigs,etc.made from pile or flowing elements which protrude less than 50 mm from the surface of the toy))	-	2000	-
4.2,4.2.4 -5.3(Toys to be worn on the head (Full or partial moulded head masks))	-	2000	-
4.2,4.2.5 -5.4(Toys to be worn on the head (hood & headdresses,including upward -protruding items & mask not covered by 4.2.4 which partially or fully cover the head (e.g fabric & paperboard masks,eye masks,face masks), but excluding those items covered by 4.3))	-	2000	-
4.2,4.2.5 -5.4(Toys to be worn on the head (hood & headdresses,including upward -protruding items & mask not covered by 4.2.4 which partially or fully cover the head (e.g fabric & paperboard masks,eye masks,face masks), but excluding those items covered by 4.3))	-	2000	-
4.3 -5.5(Toy disguise costumes & toys intended to be worn by a child in play)	-	2000	-
4.3 -5.5(Toy disguise costumes & toys intended to be worn by a child in play)	-	2000	-
4.3 -5.4(Toy disguise costumes & toys intended to be worn by a child in play)	-	2000	-
4.3 -5.4(Toy disguise costumes & toys intended to be worn by a child in play)	-	2000	-
4.4 -5.4(Toys intended to be entered by a child)	-	2000	-
4.4 -5.4(Toys intended to be entered by a child)	-	2000	-
4.4 -5.4(Toys intended to be entered by a child Warning)	-	2000	-
4.5 -5.5(Soft-filled toys)	-	2000	-
4.5 -5.5(Soft-filled toys)	-	2000	-

08 May, 2028

-
Included w.e.f 01.04.2026

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 16286 (2014)

Spoons - Specification

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(food grade stainless steel.)	-	15000	-
3.2 (i)(Brass as parent material)	-	15000	-
3.2(ii)(Brass plated with pure silver)	-	15000	-
3.3(Plastic handle)	-	15000	-
4(Shapes and Dimensions)	-	15000	-
5.1(Manufacture)	-	15000	-
5.2(Workmanship)	-	15000	-
5.3(Finish)	-	15000	-
8(Marking)	-	15000	-
9(Packing)	-	15000	-
Cl-6.1(Staining Test)	-	15000	-
Cl-6.2(Bending Test)	-	15000	-
Cl-6.3(Load Test)	-	15000	-
Cl-6.4.1(Boiling)	-	15000	-
Cl-6.4.2(Impact)	-	15000	-
Cl-6.4.3(Staining)	-	15000	-
3.1(food grade stainless steel.)	-	-	-
3.2 (i)(Brass as parent material)	-	-	-
3.2(ii)(Brass plated with pure silver)	-	-	-
3.3(Plastic handle)	-	-	-
4(Shapes and Dimensions)	-	-	-
5.1(Manufacture)	-	-	-
5.2(Workmanship)	-	-	-
5.3(Finish)	-	-	-
8(Marking)	-	-	-
9(Packing)	-	-	-
Cl-6.1(Staining Test)	-	-	-
Cl-6.2(Bending Test)	-	-	-
Cl-6.3(Load Test)	-	-	-
Cl-6.4.1(Boiling)	-	-	-
Cl-6.4.2(Impact)	-	-	-
Cl-6.4.3(Staining)	-	-	-

-
Included w.e.f 01.04.2026

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 15355 (2018)

Rubber hoses and hose assemblies for liquefied petroleum gas (L.p.g) in motor vehicles - Specification (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 ,TABLE 1(Internal diameter)	-	40000	* 5,000 for dimensional tests * 10,000 for complete mechanical tests * 10,000 for complete pressure tests * 7500 for ozone test *7500 for other qualitative tests
5.2(Concentricity)	-	40000	-
5.3(Length)	-	40000	-
6.1(Performance requirements)	-	40000	-
6.2(Visual examination)	-	40000	-
6.3(Rubber compounds)	-	40000	-
6.4(Finished hose)	-	40000	-
7.1(Requirements for fittings)	-	40000	-
7.2(Requirements for fittings)	-	40000	-
8.1(Gas leakage)	-	40000	-
8.2(Minimum burst pressure)	-	40000	-
8.3(Visual examination)	-	40000	-
9.1(Marking)	-	40000	-
9.2(Marking)	-	40000	-
6.3, Table 2(Minimum Tensile Strength-Lining - ISO 37)	-	40000	-
6.3, Table 2(Minimum Tensile Strength-Cover - ISO 37)	-	40000	-
6.3, Table 2(Minimum Elongation at Break -Lining - ISO 37)	-	40000	-
6.3, Table 2(Minimum Elongation at Break -Cover - ISO 37)	-	40000	-
6.3, Table 2(Resistance to Ageing (3 days at (100±1)²C using the air-oven method in ISO 188:2007- Change in Tensile strength from original value -Lining (±, max) - ISO 37)	-	40000	-
6.3, Table 2(Resistance to Ageing (3 days at (100±1)²C using the air-oven method in ISO 188:2007- Change in Tensile strength from original value -Cover (±, max) - ISO 37)	-	40000	-
6.3, Table 2(Resistance to Ageing (3 days at (100±1)²C using the air-oven method in ISO 188:2007- Change in Elongation at break from original value -Lining - ISO 37)	-	40000	-
6.3, Table 2(Resistance to Ageing (3 days at (100±1)²C using the air-oven method in ISO 188:2007- Change in Elongation at break from original value -Cover - ISO 37)	-	40000	-
6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Tensile strength from original value -Lining (±, max) - ISO 37)	-	40000	-
6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Tensile strength from original value -Cover (±, max) - ISO 37)	-	40000	-
6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Elongation at break from original value -Lining (±, max) - ISO 37)	-	40000	-
6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Elongation at break from original value -Cover (±, max) - ISO 37)	-	40000	-
6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Volume-Lining (±, max) - ISO 37)	-	40000	-
6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Volume-Cover (±, max) - ISO 37)	-	40000	-
6.4, Table 3(Proof Pressure- ISO 1402, hold for 10 miniute)	-	40000	-
6.4, Table 3(Minimum Burst Pressure -ISO 1402)	-	40000	-
6.4, Table 3(Adhesion between lining and reinforcement and between reinforcement and cover (min) - ISO 8033)	-	40000	-
6.4, Table 3(Ozone Resistance -ISO 7326:2006, method 2 ; Ozone concentration (100±5) parts per million ; Temperature (40±1) °C and 50±5 % Relative Humidity for 72 h at 20% Elongation)	-	40000	-
6.4, Table 3(Low Temperature flexibility - ISO 4672-1997, method B at ( -40 ± 2 )°C)	-	40000	-
6.4, Table 3(Permeability to propane gas (max) - ISO 4080-2009, method 3 ; use hose size 19 for test , adjust waterbath temperature to maintain a hose pressure of ( 1 ± 0.02 ) Mpa (0.007 cm³/(m².s) or 36.0 cm³/m of hose in 24 h)	-	40000	-
5.1 ,TABLE 1(Internal diameter)	-	0	-
5.2(Concentricity)	-	0	-
5.3(Length)	-	0	-
6.1(Performance requirements)	-	0	-
6.2(Visual examination)	-	0	-
6.3(Rubber compounds)	-	0	-
6.4(Finished hose)	-	0	-
7.1(Requirements for fittings)	-	0	-
7.2(Requirements for fittings)	-	0	-
8.1(Gas leakage)	-	0	-
8.2(Minimum burst pressure)	-	0	-
8.3(Visual examination)	-	0	-
9.1(Marking)	-	0	-
9.2(Marking)	-	0	-
6.3, Table 2(Minimum Tensile Strength-Lining - ISO 37)	-	0	-
6.3, Table 2(Minimum Tensile Strength-Cover - ISO 37)	-	0	-
6.3, Table 2(Minimum Elongation at Break -Lining - ISO 37)	-	0	-
6.3, Table 2(Minimum Elongation at Break -Cover - ISO 37)	-	0	-
6.3, Table 2(Resistance to Ageing (3 days at (100±1)²C using the air-oven method in ISO 188:2007- Change in Tensile strength from original value -Lining (±, max) - ISO 37)	-	0	-
6.3, Table 2(Resistance to Ageing (3 days at (100±1)²C using the air-oven method in ISO 188:2007- Change in Tensile strength from original value -Cover (±, max) - ISO 37)	-	0	-
6.3, Table 2(Resistance to Ageing (3 days at (100±1)²C using the air-oven method in ISO 188:2007- Change in Elongation at break from original value -Lining - ISO 37)	-	0	-
6.3, Table 2(Resistance to Ageing (3 days at (100±1)²C using the air-oven method in ISO 188:2007- Change in Elongation at break from original value -Cover - ISO 37)	-	0	-
6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Tensile strength from original value -Lining (±, max) - ISO 37)	-	0	-
6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Tensile strength from original value -Cover (±, max) - ISO 37)	-	0	-
6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Elongation at break from original value -Lining (±, max) - ISO 37)	-	0	-
6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Elongation at break from original value -Cover (±, max) - ISO 37)	-	0	-
6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Volume-Lining (±, max) - ISO 37)	-	0	-
6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Volume-Cover (±, max) - ISO 37)	-	0	-
6.4, Table 3(Proof Pressure- ISO 1402, hold for 10 miniute)	-	0	-
6.4, Table 3(Minimum Burst Pressure -ISO 1402)	-	0	-
6.4, Table 3(Adhesion between lining and reinforcement and between reinforcement and cover (min) - ISO 8033)	-	0	-
6.4, Table 3(Ozone Resistance -ISO 7326:2006, method 2 ; Ozone concentration (100±5) parts per million ; Temperature (40±1) °C and 50±5 % Relative Humidity for 72 h at 20% Elongation)	-	0	-
6.4, Table 3(Low Temperature flexibility - ISO 4672-1997, method B at ( -40 ± 2 )°C)	-	0	-
6.4, Table 3(Permeability to propane gas (max) - ISO 4080-2009, method 3 ; use hose size 19 for test , adjust waterbath temperature to maintain a hose pressure of ( 1 ± 0.02 ) Mpa (0.007 cm³/(m².s) or 36.0 cm³/m of hose in 24 h)	-	0	-

-
Included w.e.f 01.04.2026

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 10908 (2023)

FLEXIBLE RUBBER TUBING FOR LIQUEFIED PETROLEUM GAS SPECIFICATION Second Revision

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(The materials used in the manufacture of tubing shall be homogeneous and shall be resistant to outdoor exposure.)	-	20000	2000 For complete dimensional and qualitative tests 5000 for complete mechanical tests 2500 for pressure test 1500 for ageing test 4500 for ozon test *4500 for other fire related tests
4.1(The tubing made out of this material shall be green in colour and shall be supplied normally in cut lengths or in rolls of running length)	-	20000	2000 For complete dimensional and qualitative tests 5000 for complete mechanical tests 2500 for pressure test 1500 for ageing test 4500 for ozon test *4500 for other fire related tests
4.1("when supplied in cut lengths, the pieces shall be of minimum 1.0 m to maximum of 1.5 m in length. ")	-	20000	-
4.2(The walls shall be seamless and free from all visible defects, such as lumps, blow-holes, cracks etc and the bore shall be clean and free from loose particles which might be carried forward by the gas.)	-	20000	-
4.3.1(The tubing when supplied in 6.4 mm inside diameter; the tolerance as per table-1)	-	20000	-
4.3.1(The tubing when supplied in 7.00 mm inside diameter; the tolerance as per table-1)	-	20000	-
4.3.2(It shall comply with thickness as given in Table 1, when measured according to IS 443 (Part 8). The readings shall be taken on a set of six test pieces cut from different sample sections.(For Wall thickness 3.20 mm))	-	20000	-
4.3.2(It shall comply with thickness as given in Table 1, when measured according to IS 443 (Part 8). The readings shall be taken on a set of six test pieces cut from different sample sections.(For Wall thickness 3.50 mm))	-	20000	-
4.4.1(When tested in accordance with the method given in Annex B, the tubing shall fit over the standard and oversize metal nozzle shown in Fig. 1, 2 and 3.)	-	20000	-
4.4.2("When tested in accordance with the method given in Annex B, the tubing shall remain attached to both nozzles throughout the test period. ")	-	20000	-
4.5(When immersed in water for 5 min under an internal air pressure of 0.25 MPa or 250 kPa (2.5 bar), the increase in the outside diameter or the tubing shall not be more than 15 percent.)	-	20000	-
4.12("When tested in accordance with the method described in Annex F, the tubing shall not burn to either of the outer marks within the test period of 45 s")	-	20000	-
4.11("When tested in accordance with the method described in Annex E, the slit tube shall not show any breakage on surface or cracks or defects.")	-	20000	-
4.10(When tested in accordance with Annex D, the npentane absorbed shall not exceed 15 percent of the initial mass of the tubing and the amount of npentane extractable matter shall not exceed 10 percent of the initial mass of tubing.)	-	20000	-
4.9(60 cm long tubing shall be subjected to a crushing force of 350 N applied on the middle of the tubing evenly over a length of 25 mm for 5 minutes, and 30 min after removal of the force it shall not show any deformation or collapse, nor shall it leak when subjected to an internal air pressure of 250 kPa)	-	20000	-
4.8.2(The tubing shall be so flexible that it will make contact with a cylindrical former of radius 68 mm for at least 110° of its circumference when the immersed tubing is placed over the former and a mass of 1.6 kg is attached to each end.)	-	20000	-
4.8.1("The tubing shall be immersed for 72 h in liquid pentane and then conditioned at room temperature for 24 h, after which it shall be tested in accordance with the method prescribed in Annex C, the gas pressure shown on the manometer shall not drop by more than 1 kPa")	-	20000	-
4.7("The flexible tubing or suitable portion of the tubing shall be subjected to accelerated ageing at a temperature of 100 °C for 72 h in accordance with the normal method prescribed in IS 3400 (Part 4). It shall not show a change of + 10° A of its original shore hardness value (see 4.6) after accelerated ageing")	-	20000	-
4.6(The hardness on the flat surface of the cut/slit tubing shall be measured as prescribed in IS 3400 (Part 2/Sec 4), the shore hardness shall be 60 ± 5°A.)	-	20000	-
4.5(When immersed in water for 5 min under an internal air pressure of 0.25 MPa or 250 kPa (2.5 bar), there shall be no sign of leakage in the tubing. Also the same shall not burst when the pressure is increased to 0.5 MPa or 500 kPa (5 bar), The test shall be carried out on a length of 60 cm.)	-	20000	-

-
Included w.e.f 01.04.2026

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 4454 (Part 2) (2025)

Steel wire for mechanical springs - Specification : Part 2 oil hardened and tempered steel wire

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General requirements)	-	14000	7000 - For complete mechanical tests 5000 - For complete chemical tests 2000 for Dimensional and other qualitative tests
Cl-6(Manufacture)	-	14000	-
Cl-7.2 & 7.2, Table 2(C)	-	14000	-
Cl-7.2 & 7.2, Table 2(Si)	-	14000	-
Cl-7.2 & 7.2, Table 2(Mn)	-	14000	-
Cl-7.2 & 7.2, Table 2(S Max)	-	14000	-
Cl-7.2 & 7.2, Table 2(P Max)	-	14000	-
Cl-7.2 & 7.2, Table 2(Cr)	-	14000	-
Cl-7.2 & 7.2, Table 2(V)	-	14000	-
Cl-7.2 & 7.2, Table 2(Cu Max)	-	14000	-
Cl-7.2, Table-3 (i)(Carbon)	-	14000	-
Cl-7.2, Table-3 (ii)(Silicon)	-	14000	-
Cl-7.2, Table-3 (iii)(Manganese)	-	14000	-
Cl-7.2, Table-3 (iv)(Sulphur)	-	14000	-
Cl-7.2, Table-3 (v)(Phosphorus)	-	14000	-
Cl-7.2, Table-3 (vi)(Copper)	-	14000	-
Cl-7.2, Table-3 (vii)(Chromium)	-	14000	-
Cl-7.2, Table-3 (viii)(Vanadium)	-	14000	-
Cl-8(Freedom from Defects)	-	14000	-
Cl-9(Dimensions and Tolerance)	-	14000	-
Cl-9.1, 9.4 and 9.4(Nominal Dimeter of Wire,- Over)	-	14000	-
Cl-9.1, 9.4 and 9.4(Nominal Dimeter of Wire,- Up to and including)	-	14000	-
Cl-9.3, Table 5(Flattened Wire-Tolerance on width)	-	14000	-
Cl-9.3, Table 5(Flattened Wire-Tolerance on thickness)	-	14000	-
Cl-10.1, Table 6 (A)(Tensile Strength for Grades, Mpa-FDC)	-	14000	-
Cl-10.1, Table 6 (A)(Tensile Strength for Grades, Mpa- FDCrV-A)	-	14000	-
Cl-10.1, Table 6 (A)(Tensile Strength for Grades, Mpa- FDCrV-B)	-	14000	-
Cl-10.1, Table 6 (A)(Tensile Strength for Grades, Mpa-FDSiCr)	-	14000	-
Cl-10.1, Table 6 (B)(Tensile Strength for Grades, Mpa-FDSiCrV)	-	14000	-
Cl-10.1, Table 7 (A)(Tensile Strength for Grades, Mpa-TDC)	-	14000	-
Cl-10.1, Table 7 (A)(Tensile Strength for Grades, Mpa-VDc)	-	14000	-
Cl-10.1, Table 7 (A)(Tensile Strength for Grades, Mpa -TDCrV-A)	-	14000	-
Cl-10.1, Table 7 (A)(Tensile Strength for Grades, Mpa- VDCrV-A)	-	14000	-
Cl-10.1, Table 7 (A)(Tensile Strength for Grades, Mpa- TDCrV-B)	-	14000	-
Cl-10.1, Table 7 (A)(Tensile Strength for Grades, Mpa- VDCrV-B)	-	14000	-
Cl-10.1, Table 7 (A)(Tensile Strength for Grades, Mpa- TDSiCr)	-	14000	-
Cl-10.1, Table 7 (A)(Tensile Strength for Grades, Mpa- VDSiCr)	-	14000	-
Cl-10.1, Table 7 (B)(Tensile Strength for Grades, Mpa- TDSiCrV)	-	14000	-
Cl-10.1, Table 7 (B)(Tensile Strength for Grades, Mpa- VDSiCrV)	-	14000	-
Cl-10.2(Wrapping Test)	-	14000	-
Cl-10.3.1(Torsion Test)	-	14000	-
Cl-10.3.2, Table-8(Minimum No. of Twist for Grades-TDC,)	-	14000	-
Cl-10.3.2, Table-8(Minimum No. of Twist for Grades-VDC)	-	14000	-
Cl-10.3.2, Table-8(Minimum No. of Twist for Grades-TDCrV,)	-	14000	-
Cl-10.3.2, Table-8(Minimum No. of Twist for Grades-VDCrV)	-	14000	-
Cl-10.3.2, Table-8(Minimum No. of Twist for Grades-TDSiCr,)	-	14000	-
Cl-10.3.2, Table-8(Minimum No. of Twist for Grades-VDSiCr)	-	14000	-
Cl-10.3.2, Table-8(Minimum No. of Twist for Grades-TDSiCrV,)	-	14000	-
Cl-10.3.2, Table-8(Minimum No. of Twist for Grades-VDSiCrV)	-	14000	-
Cl-10.5(Coiling and Stretching Test)	-	14000	-
Cl-10.6.1, Table-9(Permissible Depth of Surface Defects for Wire Grades- VD)	-	14000	-
Cl-10.6.1, Table-9(Permissible Depth of Surface Defects for Wire Grades- TD)	-	14000	-
Cl-10.6.1, Table-9(Permissible Depth of Surface Defects for Wire Grades- FD)	-	14000	-
Cl-10.6.1, Table-9(Nominal Dimeter of Wire,- From)	-	14000	-
Cl-10.7(Eddy Current Test)	-	14000	-
Cl-10.8, Table-10(Decarburization Test- VD)	-	14000	-
Cl-10.8, Table-10(Decarburization Test-TD)	-	14000	-
Cl-10.8, Table-10(Decarburization Test-FD)	-	14000	-
Cl-11(Surface Finish)	-	14000	-
Cl-15(Marking)	-	14000	-

-
Included w.e.f 01.04.2026

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 4308 (2019)

Dry Chemical Powders for Fire Fighting — BC, ABC and D Types — Specification ( Third Revision )

48500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5 Table 1(i)(Main Chemical constituent-Sodium/Potassium bicarbonate )	-	10000	-
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	10000	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	10000	-
Clause 5 Table 1(vi)(Water repellency)	-	10000	-
Clause 5 Table 1(vii)(Moisture content)	-	10000	-
Clause 5 Table 1(viii)(Rate of flow)	-	10000	-
Clause 5 Table 1(ix)(Foam compatibility (required if declared by the manufacturer))	-	10000	-
Clause 5 Table 1(x)(Fire test)	-	40000	-
Clause 5 Table 1(xi)(Temperature resistance test)	-	10000	-
Clause 5 Table 1(xii)(colour)	-	5000	-
Clause 5 Table 1(i)(Main chemical constituent-(Monoammonuim phosphate))	-	10000	-
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	10000	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	10000	-
Clause 5 Table 1(vi)(Water repellency)	-	10000	-
Clause 5 Table 1(vii)(Moisture content)	-	10000	-
Clause 5 Table 1(viii)(Rate of flow)	-	10000	-
Clause 5 Table 1(ix)(Foam compatibility (required if declared by the manufacturer))	-	10000	-
Clause 5 Table 1(x)(Fire test)	-	40000	-
Clause 5 Table 1(xi)(Temperature resistance test)	-	10000	-
Clause 5 Table 1(xii)(colour)	-	5000	-
Clause 5 Table 1(i)(Main chemical constituent(Eutectic mixture of chlorides of sodium, potassium and barium))	-	10000	-
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	10000	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	10000	-
Clause 5 Table 1(vi)(Water repellency)	-	10000	-
Clause 5 Table 1(vii)(Moisture content)	-	10000	-
Clause 5 Table 1(viii)(Rate of flow)	-	10000	-
Clause 5 Table 1(x)(Fire test)	-	40000	-
Clause 5 Table 1(xi)(Temperature resistance test)	-	10000	-
Clause 5 Table 1(xii)(colour)	-	5000	-
Clause No. 5, Sr. No. XII of Table 1(Colour of 'D' Powder)	-	1000	-
Clause No. 5, Sr. No. XII of Table 1(Colour of 'BC' Powder)	-	1000	-
Clause No. 5, Sr. No. XII of Table 1(Colour of 'ABC' Powder)	-	1000	-
Clause No. 5, Sr. No. XI of Table 1, Annex-K(Temperature Resistance Test)	-	10000	-
Clause No. 5, Sr. No. X of Table 1, Annex-J(Fire test for Class 'D')	-	40000	-
Clause No. 5, Sr. No. X of Table 1, Annex-J(Fire test for Class 'B')	-	40000	-
Clause No. 5, Sr. No. X of Table 1, Annex-J(Fire test for Class 'A')	-	40000	-
Clause No. 5, Sr. No. IX of Table 1, Annex-H(Foam Compatibility)	-	10000	-
Clause No. 5, Sr. No. VIII of Table 1, Annex-G(Rate of flow/ Free flowing Characteristic for Class D Powder)	-	10000	-
Clause No. 5, Sr. No. VIII of Table 1, Annex-G(Rate of flow/ Free flowing Characteristic)	-	10000	-
Clause No. 5, Sr. No. VII of Table 1, Annex-F(Moisture Content)	-	10000	-
Clause No. 5, Sr. No. VI of Table 1, Annex-E(Water Repellency)	-	10000	-
Clause No. 5, Sr. No. V of Table 1, Annex-D(Hygroscopicity)	-	10000	-
Clause No. 5, Sr. No. IV of Table 1, Annex-C(Particle Size/ Sieve Analysis)	-	10000	-
Clause No. 5, Sr. No. III of Table 1, Annex-B(Aparent Denisty)	-	10000	-
Clause No. 5, Sr. No. II of Table 1, Annex-A(Minimum Main Chemical Constituent for D Powder)	-	10000	-
Clause No. 5, Sr. No. II of Table 1, Annex-A(Minimum Main Chemical Constituent for BC Powder)	-	10000	-
Clause No. 5, Sr. No. II of Table 1, Annex-A(Minimum Main Chemical Constituent for ABC Powder)	-	10000	-
Clause No. 5, Sr. No. I of Table 1, Annex-A(Main Chemical Constituent for D Powder)	-	10000	-
Clause No. 5, Sr. No. I of Table 1, Annex-A(Main Chemical Constituent for BC Powder)	-	10000	-
Clause No. 5, Sr. No. I of Table 1, Annex-A(Main Chemical Constituent of ABC Powder)	-	10000	-
Clause 5 Table 1(iv)(Particle size / sieve analysis (Declared value by the manufacturer))	-	10000	-
Clause 5 Table 1(i)(Minimum main chemical constituent)	-	10000	-
Clause 5 Table 1(iii)(Apparent density (Declared value by the manufacturer))	-	10000	-
Clause 5 Table 1(v)(Hygroscopicity)	-	10000	-
Clause 5 Table 1(vi)(Water repellency)	-	10000	-
Clause 5 Table 1(vii)(Moisture Content)	-	10000	-
Clause 5 Table 1(xii)(Colour)	-	5000	-

-
Included w.e.f 01.04.2026

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 16647 (2017)

Oriented unplasticized polyvinyl chloride (Pvc - O) pipes for water supply - Specification

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.5( Density, g/cc)	-	500	-
9 /9.1 / 27 degree centigrate(MECHANICAL CHARACTERISTICS OF PIPES9./ Resistance to Hydrostatic Pressure)	-	10000	-
7.3( Opacity)	-	1000	-
9.2, table -11( Resistance to External Blows at 0 °C)	-	2000	-
8.2 table-9( Pipe Ends)	-	500	-
5 / 5.1(MATERIALS )	-	5000	-
5.3(VCM Content)	-	5000	-
5.4( K-Value)	-	3000	-
5.6 / 5.6.1( Material Classification, table -1)	-	5000	-
7, see 8.3 and fig-1( GENERAL REQUIREMENTS OF PIPES/ visual appearance)	-	500	-
7.2( Colour)	-	500	-
6.0(CLASSIFICATION OF PIPES, table-2)	-	500	-
8.1.1, 8.1.1.2, table-3(Dimension of Pipes / Diameter/8.1.1.2 Diameter at any point)	-	1000	-
8.1.2, table 4 to 7(Wall Thickness)	-	500	-
8.1.3 (Length, meter)	-	500	-
8.2 table-9(Dimensions of Integral Socket)	-	1000	-
9.3 table-12( Ring Stiffness)	-	5000	-
9.4, annexure-E( Orientation Factor)	-	3000	-
10, table-13( PHYSICAL AND 1CHARACTERISTICS)	-	10000	-
11,11.1( MECHANICAL CHARACTERISTICS OF ASSEMBLIES INCLUDING JOINTS/ 11.1 Assemblies with Non-End-Load-Bearing Joints)	-	2000	-
11.2 / 11.2.1( Short-Term Pressure Test for Leak Tightness of Assemblies)	-	2000	-
11.3( Short-Term Negative Pressure Test for Leak Tightness of Assemblies)	-	2000	-
12(a)( ELASTOMERIC SEALS)	-	3000	-
12(b)( ELASTOMERIC SEALS)	-	3000	-
Cl.10, Table 10/1(Vicat Softening Temp (C))	-	1000	-
Cl.10, Table 10/2(Effect on Water)	-	5000	-
Cl.10, Table 10/3(Resistant to di-chloromethane (Degree of gelation))	-	2000	-
Cl.10, Table 10/4(Alternate Test (Tensile test))	-	2000	-

-
Included w.e.f 01.04.2026

LPG Equipment Research Centre (LERC), Bengaluru

6141034

IS 447 (1988)

Specification for rubber hose for welding (Fourth Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 3.2 - Table 1(Bore size)	-	500	-
Cl. 3.2 - Table 1(Lining Thickness)	-	500	-
Cl. 3.2 - Table 1(Cover Thickness)	-	500	-
Cl. 3.2 - Table 1(Length %)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Lining MPA)	-	1000	-
Cl. 3.3 - Table 2(Tensile strength - Cover Mpa)	-	1000	-
Cl. 3.3 - Table 2(Elongation at break - Lining %)	-	1000	-
Cl. 3.3 - Table 2(Elongation at break - Cover %)	-	1000	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Lining %)	-	1000	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Cover %)	-	1000	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Lining %)	-	1000	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Cover %)	-	1000	-
Cl. 3.4 - Table3(Pressure Tests)	-	2000	-
Cl. 3.4 - Table3(Adhesion KN/m Min)	-	1500	-
Cl. 3.2 - Table 1(Bore size, mm)	-	500	-
Cl. 3.2 - Table 1(Lining Thickness, mm)	-	500	-
Cl. 3.2 - Table 1(Cover Thickness, mm)	-	500	-
Cl. 3.2 - Table 1(Length)	-	500	-
Cl. 3.3 - Table 2(Tensile strength - Lining, Mpa)	-	1000	-
Cl. 3.3 - Table 2(Tensile strength - Cover, Mpa)	-	1000	-
Cl. 3.3 - Table 2(Elongation at break - Lining)	-	1000	-
Cl. 3.3 - Table 2(Elongation at break - Cover)	-	1000	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Lining)	-	1000	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Cover)	-	1000	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Lining)	-	1000	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Cover)	-	1000	-
Cl. 3.4 - Table3(Pressure Tests)	-	500	-
Cl. 3.4 - Table3(Adhesion, KN/m Min)	-	1500	-
Cl. 3.4 - Table3(Adhesion)	-	500	-
Cl. 3.4 - Table3(Pressure Tests)	-	500	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Cover)	-	0	-
Cl. 3.3 - Table 2(After Ageing Elongation at break - Lining)	-	0	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Cover)	-	0	-
Cl. 3.3 - Table 2(After Ageing Tensile strength - Lining)	-	0	-
Cl. 3.3 - Table 2(Elongation at break - Cover)	-	0	-
Cl. 3.3 - Table 2(Elongation at break - Lining)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Cover)	-	0	-
Cl. 3.3 - Table 2(Tensile strength - Lining)	-	0	-
Cl. 3.2 - Table 1(Length)	-	0	-
Cl. 3.2 - Table 1(Cover Thickness)	-	0	-
Cl. 3.2 - Table 1(Lining Thickness)	-	0	-
Cl. 3.2 - Table 1(Bore size)	-	0	-

-
Included w.e.f 01.04.2026

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

All

34680 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material)	-	4200	1. Material Identification= 2000 2. Overall Migration= 1700 3. Specimen Charges= 500 Discount of 25 % is applicable on total test charges only for BIS.
3.2(Tapes – Width )	-	5300	1. Fabric= 500 2. Tape Width= 500 3. Thickness of the Tape= 500 4. Material Identification= 2000 5.Density= 700 6. Melt Flow Index= 1100 Discount of 25 % is applicable on total test charges only for BIS.
3.2(Tapes – Linear Density )	-	5500	1. Linear Density= 700 2. Tenacity & Elongation of Tape= 1100 3. Tenacity After UV Exposure= 1100 4. Ash Content= 1200 5. Shrinakge(700 x 2)= 1400 Discount of 25 % is applicable on total test charges only for BIS.
3.3(Tying Cord)	-	4000	1. Construction of Rope= 500 2. Yarn Material Identification= 2000 3. Construction & Structure= 1000 4. No. of Yarns in Ropes= 500 Discount of 25 % is applicable on total test charges only for BIS.
3.3(Tying Cord)	-	1200	1. Workmanship= 500 2. Linear Density= 700 Discount of 25 % is applicable on total test charges only for BIS.
3.3(Tying Cord)	-	1100	1. Breaking Strength= 1100 Discount of 25 % is applicable on total test charges only for BIS.
3.4(Sack)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.1 and Table 1 i b(Dimensions Outside Width)	-	0	-
4.1 and Table 1 ii(Ends per dm )	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.1 and Table 1 iii(Picks per dm )	-	0	-
4.2 and Table 1 iv(Mass of sack )	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1600	(Test Charge 1100 + Specimen Charge 500) Discount of 25 % is applicable on total test charges only for BIS.
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	1100	Discount of 25 % is applicable on total test charges only for BIS.
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	1100	(Test Charge 1100 + Specimen Charge 500) Discount of 25 % is applicable on total test charges only for BIS.
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0	-
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12880	(UV Exposure Charge 10180 + Test charges 2200 + specimen charges 500) Discount of 25 % is applicable on total test charges only for BIS. 1. Breaking strength of fabric after UV radiation Warpway & weft way = 2200
4.1 and Table 1 ix(Ash content )	-	1200	Discount of 25 % is applicable on total test charges only for BIS.
3.1(Raw Material)	-	0	-
3.2(Tapes – Width )	-	0	-
3.2(Tapes – Linear Density )	-	0	-
3.3(Tying Cord)	-	0	-
3.3(Tying Cord)	-	0	-
3.3(Tying Cord)	-	0	-
3.4(Sack)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
3.4.1(Seam)	-	0	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	0	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	0	-
4.1 and Table 1 ii(Ends per dm )	-	0	-
4.1 and Table 1 iii(Picks per dm )	-	0	-
4.2 and Table 1 iv(Mass of sack )	-	0	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	0	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	0	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	0	-
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0	-
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
4.1 and Table 1 ix(Ash content )	-	0	-
3.2 (Mesh size and weight is g/cm2) (amendment 3)(Mesh size and weight is g/cm2)	-	500	Discount of 25 % is applicable on total test charges only for BIS.

-
-

Samridhi Test House Pvt. Ltd.

8184706

IS 2925 (1984)

Specification for industrial safety helmets (Second Revision)

7800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6(Performance Requirements)	-	5700	-
8.5(Performance Requirements)	-	750	-
8.4(Performance Requirements)	-	950	-
8.3(Performance Requirements)	-	950	-
8.2(Performance Requirements)	-	1150	-
8.1(Performance Requirements)	-	1150	-
7.1(Construction)	-	200	-
6.1(Construction)	-	100	-
5.5(Construction)	-	100	-
5.4(Construction)	-	100	-
5.3(Construction)	-	200	-
5.2(Construction)	-	1000	-
5.1(Construction)	-	100	-
4.1(Sizes)	-	100	-
3.3(Material)	-	100	-
3.2(Material)	-	100	-
3.1(Material)	-	100	-

-
-

Samridhi Test House Pvt. Ltd.

8184706

IS 9573 : Part 2 (2017)

Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 2 domestic and commercial application (Fourth Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1(General)	-	250	-
Clause 4.2(Material)	-	300	-
Clause 4.2.1(Lining)	-	250	-
Clause 4.2.2 (a)(Reinforcement)	-	200	-
Clause 4.2.2 (b)(Reinforcement)	-	200	-
Clause 4.2.3(Cover)	-	300	-
Clause 4.3 Sub Clause 4.3.1 Table 1(Bore Size)	-	200	-
Clause 4.3 Sub Clause 4.3.2 (a)(Thickness of Lining and Cover)	-	300	-
Clause 4.3 Sub Clause 4.3.2 (b)(Thickness of Lining and Cover)	-	300	-
Clause 4.3 Sub Clause 4.3.3(Length)	-	300	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (a)(Tensile Strength- Lining)	-	400	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (b)(Tensile Strength- cover)	-	350	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (a)(Elongation at break- Lining)	-	400	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (b)(Elongation at break- Cover)	-	300	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test lining)	-	400	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test lining)	-	350	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test cover)	-	350	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test cover)	-	350	-
Clause 4.4 Sub Clause 4.4.3 (a)(Resistance of Lining to n-pentane)	-	500	-
Clause 4.4 Sub Clause 4.4.3 (b)(Resistance of Lining to n-pentane)	-	500	-
Clause 4.5 Sub clause 4.5.1(Adhesion)	-	300	-
Clause 4.5 Sub clause 4.5.2(Low Temperature Flexibility)	-	400	-
Clause 4.5 Sub clause 4.5.3(Flexibility of Hose)	-	350	-
Clause 4.5 Sub clause 4.5.4(Ozone Resistance)	-	3000	-
Clause 4.5 Sub clause 4.5.5 4.5.5.1(Proof pressure test)	-	350	-
Clause 4.5 Sub clause 4.5.5 4.5.5.2(Bursting pressure)	-	350	-
Clause 4.5 Sub clause 4.5.6(Grip Strength Test)	-	400	-
Clause 4.5 Sub clause 4.5.7(Burning Behaviour)	-	300	-
Clause 5.2 (a)(Marking Manufacturer’s name or trade-mark, if any )	-	100	-
Clause 5.2 (b)(Marking Words LPG, Max W.P. 1.0 MPa; )	-	100	-
Clause 5.2 (c)(Marking Nominal bore, 1000111)	-	100	-
Clause 5.2 (d)(Marking Batch/Lot No. )	-	100	-
Clause 5.2 (e)(Marking Month and year of manufacture )	-	100	-
Clause 5.2 (f)(Marking IS 9573 (Part 2) )	-	100	-
Clause 5.2 (f)(Marking ecommended to replace before (MONTH/YEAR) )	-	100	-
Clause 5.2.1(BIS Certification Marking )	-	100	-

-
-

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 9755 (2021)

Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers

All

40630 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.6(Drop Impact Test)	-	1600	(Test Charges 1100 + Specimen Charges 500) Discount of 25 % is applicable on total test charges only for BIS.
4.1(Raw Meterial)	-	2000	Discount of 25 % is applicable on total test charges only for BIS.
4.2("Fabric a) Width of Tape")	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.2("Fabric b) Linear Density")	-	700	Discount of 25 % is applicable on total test charges only for BIS.
4.2("Fabric c) Mesh")	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.2("Fabric c) Mesh")	-	8400	1. Material Identification= 2000 2. Melt Flow Rate= 1100 3. Tenacity & Elongation= 1100 4. Tenacity & Elongation= 1100 (After UV Exposure) 5. Thickness of the Tape= 500 6. Ash Content= 1200 7. Heat Shrinkage(700 x 2)= 1400
4.2("Fabric d) Unlaminated Fabric Mass")	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.3(Sacks)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.4.1(Loose Liner)	-	2000	Discount of 25 % is applicable on total test charges only for BIS. 1. Identification of loose liner = 2000
4.4.1(Thickness of Linear)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.4.2(Visual Observation)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.4.3(Bottom Seam of Loose Liner)	-	0	-
4.5(Mass of The Lamination)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.5(Laminated Fabric)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.5(Lamination Over Hang of the fabric after trimming)	-	2500	1. Material Identification of Lamination= 2000 2. Lamination Construction= 500 Discount of 25 % is applicable on total test charges only for BIS.
4.6.1(Distance between the Two Row of Stitches)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.6.1(Distance of outer stitch from the edge of the bag)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.6.1(Depth of the Stitch( Double fold))	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.6.1(No.of Stitches/dm)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.6.2(Breaking Load of the stitching material Non UV Stabilized sack)	-	1600	(Test Charges 1100 + Specimen Charges 500) Discount of 25 % is applicable on total test charges only for BIS.
4.6.2(Breaking Load for UV Stabilized sack)	-	2000	Discount of 25 % is applicable on total test charges only for BIS. 1. Identification of stitching yarn= 2000
4.7(Mouth of the Sack)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension a) Inside Length Type 1 & Type 2 ")	-	500	Discount of 25 % is applicable on total test charges only for BIS.
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension b) Inside Width ")	-	0	-
"Table 1 of Cl. No.5.1 Sl. No. ii"(Ends/dm ( Type 1 & Type 2))	-	500	Discount of 25 % is applicable on total test charges only for BIS.
"Table 1 of Cl. No.5.1 Sl. No. iii"(Picks /dm ( Type 1 & Type 2))	-	0	-
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric a) Unlaminated Sack( Type 1 & Type 2)")	-	500	Discount of 25 % is applicable on total test charges only for BIS.
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric b) Laminated Sack( Type 1 & Type 2)")	-	0	-
"Table 1 of Cl. No.5.3 Sl. No. v"(Mass of Sack( Type 1 & Type 2))	-	500	Discount of 25 % is applicable on total test charges only for BIS.
"Table 1 of Cl. No.5.4 Sl. No. vi"(Avg. Breaking Strength Of fabric (Ravelled strip method)( 325mm X 25 mm))	-	4300	(Test charges 3300 + specimen charges 1000) 1. Avg. Breaking Strength of Fabric(Lengthwise &Widthwise)= 2200 2. Breaking strength of lamination Joint= 1100 3. Specimen Charges= 1000 Discount of 25 % is applicable on total test charges only for BIS.
"Table 1 of Cl. No.5.4 Sl. No. vii"(Breaking Strength of Bottom Seam (Ravelled strip method))	-	1600	(Test charges 1100 + specimen charges 500) 1. Breaking strength of lamination Joint= 1100 2. Specimen Charges= 500 Discount of 25 % is applicable on total test charges only for BIS.
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric a)Length(Type 1 & Type 2)")	-	0	-
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric b) Width(Type 1 & Type 2)")	-	0	-
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content a) For UV Stabilized Sack")	-	1200	Discount of 25 % is applicable on total test charges only for BIS.
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content b) For Non- UV Stabilized Sack")	-	0	-
"Table 1 of Cl. No.5.6 Sl. No. x"(Drop Impact Strength)	-	0	-
Cl. No.5.2(Visual Observation)	-	500	Discount of 25 % is applicable on total test charges only for BIS.
Cl. No.5.3(Mass of Bale)	-	0	-
Cl. No.5.4(Breaking Strength of Fabric)	-	0	-
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	0	-
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	0	-
Cl. No.5.5("Ash Content b) For Non- UV Stabilized Sack")	-	0	-
Cl. No.5.6(Drop Impact testing of filled sack)	-	0	-
Cl. No.5.7(UV Resistance)	-	12880	1. Avg. Breaking Strength of Fabric(Lengthwise & Widthwise)= 2200 2. Specimen Charges= 500 3. UV Exposure= 10180 Discount of 25 % is applicable on total test charges only for BIS.
Cl. No.6.1(Printing on Sacks)	-	0	-
Cl. No.6.2.(Packaging)	-	0	-
Cl. No.6.3.(Marking on the Bale)	-	0	-
Cl. No.6.4.(BIS Certification Marking)	-	0	-
Cl. No.6.5.(Storage)	-	0	-

-
-

ALPHA TEST HOUSE PVT LTD, BAHADURGARH

8185306

IS 9873 : Part 1 (2025)

SAFETY OF TOYS PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES (Fifth Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1,4.1.1 &4.1.2 -5.1 to 5.23(General)	-	10000	-
4.2-5.24.2(Reasonably foreseeable abuse, Drop test)	-	10000	-
4.2-5.24.3(Reasonably foreseeable abuse, Tip-over test for large and bulky toys)	-	10000	-
4.2-5.24.4(Reasonably foreseeable abuse, Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	10000	-
4.2-5.24.5(Reasonably foreseeable abuse, Torque test)	-	10000	-
4.2-5.24.6.1(Reasonably foreseeable abuse, Tension test (General))	-	10000	-
4.2-5.24.6.2(Reasonably foreseeable abuse, Tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys)	-	10000	-
4.2-5.24.6.3(Reasonably foreseeable abuse, Tension test for pompoms)	-	10000	-
4.2-5.24.6.4(Reasonably foreseeable abuse, Tension test for protective components)	-	10000	-
4.2-5.24.6.5(Reasonably foreseeable abuse, Tension test for a projectile with a suction cup)	-	10000	-
4.2-5.24.6.6(Reasonably foreseeable abuse, Perpendicular Tension test for rotor blades)	-	10000	-
4.2-5.24.6.7(Reasonably foreseeable abuse, Tension test for rotor blades)	-	10000	-
4.2-5.24.7(Reasonably foreseeable abuse, Compression test)	-	10000	-
4.2-5.24.8(Reasonably foreseeable abuse, Flexure test)	-	10000	-
4.3, 4.3.1(Material , Material quality)	-	10000	-
4.3.2 -5.21(Expanding materials,)	-	10000	-
4.4 , 4.4.1 -5.24.2(Small parts(for children under 36 months) Drop test)	-	10000	-
4.4 , 4.4.1 -5.24.3(Small parts(for children under 36 months) , Tip-over test for large and bulky toys)	-	10000	-
4.4 , 4.4.10-5.24.4(Small parts(for children under 36 months) , Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	10000	-
4.4 , 4.4.1 -5.24.5(Small parts(for children under 36 months) , Torque test)	-	10000	-
4.4 , 4.4.1-5.24.6.1(Small parts(for children under 36 months) , Tension test (General))	-	10000	-
4.4 , 4.4.1-5.24.6.2(Small parts(for children under 36 months) , Tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys)	-	10000	-
4.4 , 4.4.1-5.24.6.3(Small parts(for children under 36 months) , Tension test for pompoms)	-	10000	-
4.4 , 4.4.1-5.24.6.4(Small parts(for children under 36 months) , Tension test for protective components)	-	10000	-
4.4 , 4.4.1-5.24.6.5(Small parts(for children under 36 months) , Tension test for a projectile with a suction cup)	-	10000	-
4.4 , 4.4.1-5.24.6.6(Small parts(for children under 36 months) , Perpendicular Tension test for rotor blades)	-	10000	-
4.4 , 4.4.1-5.24.6.7(Small parts(for children under 36 months) , Tension test for rotor blades)	-	10000	-
4.4 , 4.4.1-5.24.7(Small parts(for children under 36 months) , Compression test)	-	10000	-
4.4 , 4.4.1(Small parts(for children under 36 months) , Flexure test)	-	10000	-
4.4 , 4.4.1-5.2(Small parts(for children under 36 months) , Small parts test)	-	10000	-
4.4 , 4.4.2-5.2(Small parts(for children 36 months and over but under 72 months) , Small parts test)	-	10000	-
4.5,4.5.1 & 4.5.1.2 -5.3(Shape, size & strength of certain toys(Squeeze toys,rattles & certain other toys & components of toys), Test for shape & size of certain toys)	-	10000	-
4.5 ,4.5.1 & 4.5.1.3-5.3(Shape, size & strength of certain toys(Other toys or components of toys with nearly spherical,hemispherical,circular flared or dome-shaped ends of toys having a mass less than 0.5 kg & intended for children under 18 months), Test for shape & size of certain toys)	-	10000	-
4.5 ,4.5.1 & 4.5.1.4-5.3(Shape, size & strength of certain toys (Toys fasteners(e.g.nails ,bolts ,screws & pegs) with nearly spherical, hemispherical or dome-shaped ends intended for children 18 months & over but under 48 months), Test for shape & size of certain toys)	-	10000	-
4.5 ,4.5.2-5.4(Small balls (for children under 36 months), Small balls test)	-	10000	-
4.5 ,4.5.2(Small balls (for children 36 months and over but under 96 months), Warning)	-	10000	-
4.5 ,4.5.3-5.24.6.3(Pompoms (for children under 36 months), Tension test for pompoms)	-	10000	-
4.5 ,4.5.3-5.5(Pompoms (for children under 36 months), Test for pompoms)	-	10000	-
4.5 ,4.5.4-5.6(Pre-school play figures(for children under 36 months), Test for pre-school play figures)	-	10000	-
4.5 ,4.5.5(Toys pacifiers (for children under 36 months), Nipple length)	-	10000	-
4.5 ,4.5.6-5.10(Balloons, Determination of thickness of plastic film & sheeting (Individual thickness))	-	10000	-
4.5 ,4.5.6-5.10(Balloons, Determination of thickness of plastic film & sheeting (Average thickness))	-	10000	-
4.5 ,4.5.6-5.2(Balloons, Small part test)	-	10000	-
4.5 ,4.5.6-5.24.5(Balloons, Torque test)	-	10000	-
4.5 ,4.5.6-5.24.6.1(Balloons, Tension test)	-	10000	-
4.5 ,4.5.6(Balloons, Warning)	-	10000	-
4.5,4.5.7-5.24.2(Marbles, Drop test)	-	10000	-
4.5,4.5.7-5.24.3(Marbles, Tip-over test for large and bulky toys)	-	10000	-
4.5,4.5.7-5.24.4(Marbles, Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	10000	-
4.5,4.5.7-5.24.5(Marbles, Torque test)	-	10000	-
4.5,4.5.7-5.24.6.1(Marbles, Tension test (General))	-	10000	-
4.5,4.5.7-5.24.6.2(Marbles, Tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys)	-	10000	-
4.5,4.5.7-5.24.6.3(Marbles, Tension test for pompoms)	-	10000	-
4.5,4.5.7 -5.24.6.4(Marbles, Tension test for protective components)	-	10000	-
4.5,4.5.7-5.24.6.5(Marbles, Tension test for a projectile with a suction cup)	-	10000	-
4.5,4.5.7-5.24.6.6(Marbles, Perpendicular Tension test for rotor blades)	-	10000	-
4.5,4.5.7-5.24.6.7(Marbles, Tension test for rotor blades)	-	10000	-
4.5,4.5.7-5.24.7(Marbles, Compression test)	-	10000	-
4.5,4.5.7-5.24.8(Marbles, Flexure test)	-	10000	-
4.5,4.5.7(Marbles, Warning)	-	10000	-
4.5,4.5.8 (a)(Hemispheric-shaped toys, Number of opening)	-	10000	-
4.5,4.5.8(a)(Hemispheric-shaped toys, Opening distance from the rim)	-	10000	-
4.5,4.5.8(a)(Hemispheric-shaped toys, Two opening position)	-	10000	-
4.5,4.5.8(b)(Hemispheric-shaped toys, Rib-through-cup centre)	-	10000	-
4.5,4.5.8(c)(Hemispheric-shaped toys, Number of opening)	-	10000	-
4.5,4.5.8(c)(Hemispheric-shaped toys, Opning located from the rim)	-	10000	-
4.5,4.5.8(c)(Hemispheric-shaped toys, Apart measured along the outside contour)	-	10000	-
4.5,4.5.8(d)(Hemispheric-shaped toys, Repeated scalloped-edge pattern around the entire rim)	-	10000	-
4.5,4.5.8(d)(Hemispheric-shaped toys, Max distance between centre lines of adjacent peaks)	-	10000	-
4.5,4.5.8(d)(Hemispheric-shaped toys, Minimum depth)	-	10000	-
4.6, 4.6.1-5.8(Edges, (Accessible sharp edges of glass or metal) Sharp-edge test)	-	10000	-
4.6, 4.6.2(a)(Edges, (Functional sharp egdes for children under 36 months))	-	10000	-
4.6, 4.6.2(b)(Edges, (Functional sharp egdes for children 36 months & over but under 96 months))	-	10000	-
4.6, 4.6.3-5.8(Edges, (Edges on metal toys for children under 96 months) , Sharp-edge test)	-	10000	-
4.6, 4.6.4(Edges, (Edges on moulded toys for children under 96 months) ,)	-	10000	-
4.6, 4.6.5-5.24.7(Edges, (Edges on exposed bolts or threaded rods) , Compression test)	-	10000	-
4.6, 4.6.5-5.24.5(Edges, (Edges on exposed bolts or threaded rods) , Torque test)	-	10000	-
4.6, 4.6.5-5.24.6.1(Edges, (Edges on exposed bolts or threaded rods) , Tension test)	-	10000	-
4.6, 4.6.5(Edges, (Edges on exposed bolts or threaded rods) ,)	-	10000	-
4.7, 4.7.1(a)-5.9(Points (Accessible sharp points), Sharp-Point test)	-	10000	-
4.7, 4.7.2(a)(Functional sharp points (for children under 36 months))	-	10000	-
4.7, 4.7.2(b)(Functional sharp points(for children 36 months & over but under 96 months), Warning)	-	10000	-
4.7, 4.7.3(Wooden toys)	-	10000	-
4.8 ,4.8.1-5.24.2(Projections(General requirements), Drop test)	-	10000	-
4.8 ,4.8.1-5.24.3(Projections(General requirements), Tip-over test for large and bulky toys)	-	10000	-
4.8 ,4.8.1-5.24.4(Projections(General requirements), Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	10000	-
4.8 ,4.8.1-5.24.5(Projections(General requirements), Torque test)	-	10000	-
4.8 ,4.8.1-5.24.6.1(Projections(General requirements), Tension test (General))	-	10000	-
4.8 ,4.8.1-5.24.6.2(Projections(General requirements), Tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys)	-	10000	-
4.8 ,4.8.1-5.24.6.3(Projections(General requirements), Tension test for pompoms)	-	10000	-
4.8 ,4.8.1-5.24.6.4(Projections(General requirements), Tension test for protective components)	-	10000	-
4.8 ,4.8.1-5.24.6.5(Projections(General requirements), Tension test for a projectile with a suction cup)	-	10000	-
4.8 ,4.8.1-5.24.6.6(Projections(General requirements), Perpendicular Tension test for rotor blades)	-	10000	-
4.8 ,4.8.1-5.24.6.7(Projections(General requirements), Tension test for rotor blades)	-	10000	-
4.8 ,4.8.1-5.24.7(Projections(General requirements), Compression test)	-	10000	-
4.8 ,4.8.1-5.24.8(Projections(General requirements), Flexure test)	-	10000	-
4.9(a)-5.24.8.2(Metal wires and rods, Flexure test(wires & other metallic components intended to be bent))	-	10000	-
4.9(b)-5.24.8.3(Metal wires and rods, Flexure test(wires likely to be bent))	-	10000	-
4.9(c) -5.24.6.4(Metal wires and rods, Tension test for protective components)	-	10000	-
4.9(c) -5.8(Metal wires and rods, Sharp-edge test)	-	10000	-
4.9(c) -5.9(Metal wires and rods, Sharp-point test)	-	10000	-
4. 10 -5.10(Plastic film or plastic bags in packaging and in toys, Determination of thickness of plastic film and sheeting(Individual thickness))	-	10000	-
4. 10 -5.10(Plastic film or plastic bags in packaging and in toys, Determination of thickness of plastic film and sheeting(Average thickness))	-	10000	-
4.11.2 ,4.11.2.1(a)-5.11.2(Cords in toys intended for children under 18 months (Cords with the potential to tangle)- Length of cords & electrical cable)	-	10000	-
4.11.2 ,4.11.2.1(b)-5.11.3(Cords in toys intended for children under 18 months (Cords with the potential to tangle)- Breakway feature separation test)	-	10000	-
4.11.2 ,4.11.2.2 -5.11.2(Cords in toys intended for children under 18 months (Other cords)- Length of cords & electrical cable)	-	10000	-
4.11.3 ,4.11.3.1(a)-5.11.2(Cords in toys intended for children 18 months & over but under 36 months cords with the potential to tangle)- Length of cords & electrical cable)	-	10000	-
4.11.3 ,4.11.3.1(b)-5.11.3(Cords in toys intended for children 18 months & over but under 36 months cords with the potential to tangle)- Breakway feature separation test)	-	10000	-
4.11.3 ,4.11.3.2 -5.11.2(Cords in toys intended for children 18 months & over but under 36 months Other cords)- Length of cords & electrical cable)	-	10000	-
4.11.3 ,4.11.3.2(Cords in toys intended for children 18 months & over but under 36 months Other cords)- Warning)	-	10000	-
4.11.3 ,4.11.3.3 -5.11.2(Cords in toys intended for children 18 months & over but under 36 months Other cords without a free end)- Length of cords & electrical cable)	-	10000	-
4.11.3 ,4.11.3.3(Cords in toys intended for children 18 months & over but under 36 months Other cords without a free end)- Warning)	-	10000	-
4.11.4(a)-5.11.4(Fixed loops and nooses intended for children under 36 months- Test for fixed loops and nooses)	-	10000	-
4.11.4(b)-5.11.3(Fixed loops and nooses intended for children under 36 months- Breakway feature separation test)	-	10000	-
4.11.5 -5.11.2(Cords on pull toys - Length of cords & electrical cables)	-	10000	-
4.11.6(Electrical cables- Warning)	-	10000	-
4.11.7- 5.11.1(Diameter of certain cords intended for children under 36 months- Cord cross-sectional dimension)	-	10000	-
4.11.8- 5.11.5(Self-retracting cords intended for children under 36 months- Self-retracting cords)	-	10000	-
4.11.9.1(Toys intended to be strung across a cradle,cot ,perambulator or carriage- Warning & instruction)	-	10000	-
4.11.9.2(Toys otherwise intended to be attached to a cradle, cot, perambulator or carriage or intended to be suspended over a cot from a wall or ceiling- Warning & instruction)	-	10000	-
4.11.10(Cords on toy bags)	-	10000	-
4.11.11 -5.11.6(Cords, strings & lines for flying toys- Electrical resistance of cords)	-	10000	-
4.11.11 -5.11.6(Cords, strings & lines for flying toys- Warning)	-	10000	-
4.12, 4.12.1(a)(Toy pushchairs,perambulators & similar toys(toys with a handle or other structural member which can fold down over a child)- Number of main locking device & locking device which automatikally engages)	-	10000	-
4.12, 4.12.1-5.22.2(Toy pushchairs,perambulators & similar toys(toys with a handle or other structural member which can fold down over a child)- Toys puchchairs & perambulators)	-	10000	-
4.12, 4.12.1(Toy pushchairs,perambulators & similar toys(toys with a handle or other structural member which can fold down over a child)-- If the toys comprises two locking devices)	-	10000	-
4.12, 4.12.1(b)(Toy pushchairs,perambulators & similar toys(Toy pushchairs & perambulators that do not present a hazard of a handle or other structural member folding down over a child)- Number of locking device or safety stop)	-	10000	-
4.12, 4.12.1(b)(Toy pushchairs,perambulators & similar toys(Toy pushchairs & perambulators that do not present a hazard of a handle or other structural member folding down over a child)- Toys puchchairs & perambulators)	-	10000	-
4.12, 4.12.2(a)(Other toys with folding mechanism(Play furniture & other toys in which a folding mechanism,armor brace)- Other toys with folding mechanisms)	-	10000	-
4.12, 4.12.2(b)(Other toys with folding mechanism(Play furniture & other toys in which a folding mechanism,armor brace)- Adequate clearance between moving parts)	-	10000	-
4.12 ,4.12.3(Hinge-line clearance- Gap or clearance along the hinge line between a stationary portion and a movable portion)	-	10000	-
4.13 ,4.13.1(Circular holes in rigid materials for children under 60 months- Circular hole clearance)	-	10000	-
4.13 ,4.13.2(Accessible clearances for movable segments-)	-	10000	-
4.13 ,4.13.3 -5.7(Chains or belts in ride-on toys- Accessibility of a part or component)	-	10000	-
4.13. ,4.13.4(Other driving mechanisms)	-	10000	-
4.13 ,4.13.5(Winding keys for children under 36 months- Clearance)	-	10000	-
4.14(a)(Springs - Gap between two consecutive spirals)	-	10000	-
4.14(b)(Springs - Gap between two consecutive extension helical)	-	10000	-
4.14(c)(Springs - Gap between two consecutive compression helical)	-	10000	-
4.15.1.2-5.12.2(Sideways stability,feet available for stabilization - Sideways stability test,feet available for stabilization)	-	10000	-
4.15.1.3-5.12.3(Sideways stability,feet unavailable for stabilization - Sideways stability test,feet unavailable for stabilization)	-	10000	-
4.15.1.4-5.12.4(Fore & aft stability - Fore & aft stability test)	-	10000	-
4.15.2-5.12.5(Overload requirements for ride-on toys & seats- Overload test for ride-on toys & seats)	-	10000	-
4.15.2-5.24.4(Overload requirements for ride-on toys & seats- Dynamic strength test for wheeled ride -on toys other than toy scooter)	-	10000	-
4.15.3-5.12.6(Stability of stationary floor toys- Stability test of stationary floor toys)	-	10000	-
4.16, 4.16.1(Enclosures(Ventilation)- volume)	-	10000	-
4.16, 4.16.1(Enclosures(Ventilation)- All internal dimensions)	-	10000	-
4.16, 4.16.1(Enclosures(Ventilation)- opening /ventilation)	-	10000	-
4.16, 4.16.1(Enclosures(Ventilation)- Each opening area)	-	10000	-
4.16, 4.16.1(Enclosures(Ventilation)- Two group of opening :each group)	-	10000	-
4.16.2 , 4.16.2.1-5.13.1(Closures(Lid, doors & similar devices)- Closures)	-	10000	-
4.16.2 , 4.16.2.2(a)-5.13.2.2(Lid support for toy chests & similar toys- Lid support)	-	10000	-
4.16.2 , 4.16.2.2(a)-5.13.2.3(Lid support for toy chests & similar toys- Durability test for toy chest-lids)	-	10000	-
4.16.2 , 4.16.2.2(b)-5.13.2.3(Lid support for toy chests & similar toys- Durability test for toy chest-lids)	-	10000	-
4.16.2 , 4.16.2.2(c(Lid support for toy chests & similar toys-)	-	10000	-
4.16.3(Toys that enclose the head - Ventilation,opening)	-	10000	-
4.16.3(Toys that enclose the head - Each opening area)	-	10000	-
4.16.3(Toys that enclose the head - Two group of opening :each group)	-	10000	-
4.17 -5.14(Item that cover the face and simulated protective equipment- Impact test for toys that cover the face)	-	10000	-
4.18.2(a)-5.36(Projectiles(projectile toy)- Tip assessment of rigid projectiles)	-	10000	-
4.18.2(b)(Projectiles(projectile toy)- Leading edges)	-	10000	-
4.18.2(c)(Projectiles(projectile toy)- corner of the projectile)	-	10000	-
4.18.2(d)- 5.37(Projectiles(projectile with suction sup)- Length of suction cup projectile)	-	10000	-
4.18.2(d)-5.24.5(Projectiles(projectile with suction sup)- Torque test)	-	10000	-
4.18.2(d)-5.24.6.5(Projectiles(projectile with suction sup)- Tension test for a projectile with a suction cup)	-	10000	-
4.18.2(e)-5.24.5(Projectiles(projectile with suction sup)- Torque test)	-	10000	-
4.18.2(e)-5.24.6.5(Projectiles(projectile with suction sup)- Tension test for a projectile with a suction cup)	-	10000	-
4.18.2(e)-5.4(Projectiles(projectile with suction sup)- Small balls test)	-	10000	-
4.18.3(a) -5.2(Projectile toys with stored energy - Small part test)	-	10000	-
4.18.3(a) -5.24.2(Projectile toys with stored energy - Drop test)	-	10000	-
4.18.3(a) -5.24.3(Projectile toys with stored energy - Tip-over test for large and bulky toys)	-	10000	-
4.18.3(a) -5.24.4(Projectile toys with stored energy - Dynamic strength test for wheeled ride-on toys other than toy scooters)	-	10000	-
4.18.3(a) -5.24.5(Projectile toys with stored energy - Torque test)	-	10000	-
4.18.3(a) -5.24.6.1(Projectile toys with stored energy - Tension test (General))	-	10000	-
4.18.3(a) -5.24.6.2(Projectile toys with stored energy - Tension test for seams in soft-filled (stuffed) toys, beanbag-type toys and other similar filled toys)	-	10000	-
4.18.3(a) -5.24.6.3(Projectile toys with stored energy - Tension test for pompoms)	-	10000	-
4.18.3(a) -5.24.6.4(Projectile toys with stored energy - Tension test for protective components)	-	10000	-
4.18.3(a) -5.24.6.5(Projectile toys with stored energy - Tension test for a projectile with a suction cup)	-	10000	-
4.18.3(a) -5.24.6.6(Projectile toys with stored energy - Perpendicular Tension test for rotor blades)	-	10000	-
4.18.3(a) -5.24.6.7(Projectile toys with stored energy - Tension test for rotor blades)	-	10000	-
4.18.3(a) -5.24.7(Projectile toys with stored energy - Compression test)	-	10000	-
4.18.3(a) -5.24.8(Projectile toys with stored energy - Flexure test)	-	10000	-
4.18.3(a)-5.15.2(Projectile toys with stored energy - Wall impact test for projectiles)	-	10000	-
4.18.3(b)-5.15.1(Projectile toys with stored energy - Kinetic energy of projectiles)	-	10000	-
4.18.3(b)-5.15.1(Projectile toys with stored energy - Contact surface risilient material)	-	10000	-
4.18.3(b)-5.15.1(Projectile toys with stored energy - Instructions)	-	10000	-
4.18.3(b)-5.15.1.3.3(Projectile toys with stored energy - Determination of kinetic energy per area of contact)	-	10000	-
4.18.3(c)-5.24.5(Projectile toys with stored energy - Torque test)	-	10000	-
4.18.3(c)-5.24.6.4(Projectile toys with stored energy - Tension test for protective components)	-	10000	-
4.18.3(d)-5.15.2(Projectile toys with stored energy - Wall impact test for projectiles)	-	10000	-
4.18.4.2-5.20(Projectiles toys without stored energy(Mouth-actuated projectile toys)- Durability of mouth-actuated toys)	-	10000	-
4.18.4.3(a)(Projectiles toys without stored energy(Projectile in the form of a dart)- Contact area of the dart)	-	10000	-
4.18.4.3(b)(Projectiles toys without stored energy(Projectile in the form of a dart)- Dart have a protective cap)	-	10000	-
4.18.4.3(b)(Projectiles toys without stored energy(Projectile in the form of a dart)- Dart have a blunted front end)	-	10000	-
4.18.4.3(b)(Projectiles toys without stored energy(Projectile in the form of a dart)- Dart have a blunted front end)	-	10000	-
4.18.4.3(b)(Projectiles toys without stored energy(Projectile in the form of a dart)- Dart made of resilient material)	-	10000	-
4.18.4.3(c)- 5.24.5(Projectiles toys without stored energy(Projectile in the form of a dart)- Torque test)	-	10000	-
4.18.4.3(c)- 5.24.6.4(Projectiles toys without stored energy(Projectile in the form of a dart)- Tension test for protective component)	-	10000	-
4.18.4.4- 5.15.1.3.3(Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Determination of kinetic energy per area of contact)	-	10000	-
4.18.4.4- 5.15.2(Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Wall impact test for projectiles)	-	10000	-
4.18.4.4(a)(Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Arrow have a protective cap)	-	10000	-
4.18.4.4(b)(Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Arrow have a blunted front end)	-	10000	-
4.18.4.4(c)(Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Arrow made of resilient material)	-	10000	-
4.18.4.4-5.24.5(Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Torque test)	-	10000	-
4.18.4.4-5.24.6.4(Projectiles toys without stored energy(Arrows e.g. bow & arrow set)- Tension test for protective components)	-	10000	-
4.19,4.19.1 -5.36(Flying toys (General) - Tip assessment of rigid projectiles)	-	10000	-
4.19.2(a)(Rotor blades on flying toys)	-	10000	-
4.19.2(b) -5.24.6.6(Rotor blades on flying toys - Perpendicular tension test for rotor blades)	-	10000	-
4.19.2(c)(Rotor blades on flying toys)	-	10000	-
4.19.2(d)(Rotor blades on flying toys)	-	10000	-
4.19.2(d)(Rotor blades on flying toys)	-	10000	-
4.19.3(a)(Rotor blades on remote-controlled flying toys)	-	10000	-
4.19.3(b)-5.24.6.7(Rotor blades on remote-controlled flying toys - Tension test for rotor blades)	-	10000	-
4.2 0(a-c)(Aquatic toys)	-	10000	-
4.2 0(d)(Aquatic toys - Stopper)	-	10000	-
4.21(a)-5.16.1(Braking - Determination of freewheeling facility)	-	10000	-
4.21(a)-5.16.2(Braking - Braking performance for mechanically or electrically powered ride-on toys other than toy bicycles)	-	10000	-
4.22.1(Toys bicycles (General)- Warning)	-	10000	-
4.22.2(Toys bicycles - Instruction for use)	-	10000	-
4.22.3(Toys bicycles - Determination of maximum saddle height)	-	10000	-
4.22.4 -5.16.1(Toys bicycles (Braking requirements)- Determination of freewheeling facility)	-	10000	-
4.22.4(Toys bicycles (Braking requirements)- Brake lever dimension ,d)	-	10000	-
4.22.4(Toys bicycles (Braking requirements)- lever length)	-	10000	-
4.22.4 -5.16.3(Toys bicycles (Braking requirements)- Brake performance for toy bicycles)	-	10000	-
4.23-5.17(Speed limitation of electrically driven ride-on toys for children under 3 years- Determination of speed of electrically driven ride-on toys)	-	10000	-
4.23-5.17(Speed limitation of electrically driven ride-on toys for children 3 years & over & under 6 years- Determination of speed of electrically driven ride-on toys)	-	10000	-
4.23-5.17(Speed limitation of electrically driven ride-on toys for children 6 years & over- Determination of speed of electrically driven ride-on toys)	-	10000	-
4.24(a) -5.18(Toys containing a heat source- Ignition)	-	10000	-
4.24(b) -5.18(Toys containing a heat source(Part made of metal handle,knob &similar parts)- Determination of temperature increases)	-	10000	-
4.24(b) -5.18(Toys containing a heat source(Part made Of glass or porcelain handle,knob &similar parts)- Determination of temperature increases)	-	10000	-
4.24(b) -5.18(Toys containing a heat source(Part made Of plastic or wood handle,knob &similar parts)- Determination of temperature increases)	-	10000	-
4.24(c) -5.18(Toys containing a heat source(Part made Of metal other accessible parts of the toy)- Determination of temperature increases)	-	10000	-
4.24(c) -5.18(Toys containing a heat source(Part made Of other material other accessible parts of the toy)- Determination of temperature increases)	-	10000	-
4.25 -5.19(Liquid -filled toys - Leakage of liquid-filled toys)	-	10000	-
4.25 -5.19(Liquid -filled toys - Instruction)	-	10000	-
4.26(a) -5.2(Mouth-actuated toys- Small part test)	-	10000	-
4.26(b) -5.24.5(Mouth-actuated toys- Torque test)	-	10000	-
4.26(b) -5.24.6.1(Mouth-actuated toys- Tension test)	-	10000	-
4.26(b) -5.2(Mouth-actuated toys- Small part test)	-	10000	-
4.26(c) -5.20(Mouth-actuated toys- Durability of mouth-actuated toys)	-	10000	-
4.26(c) -5.2(Mouth-actuated toys- Small part test)	-	10000	-
4.26(d) -5.2(Mouth-actuated toys- Small part test)	-	10000	-
4.26(d) -5.24.5(Mouth-actuated toys- Torque test)	-	10000	-
4.26(d) -5.24.6.1(Mouth-actuated toys- Tension test)	-	10000	-
4.27(Toy roller skates,toy inline skates and toy skatesboards - Warning)	-	10000	-
4.28(Percussion caps specifically designed for use in toys- Warning)	-	10000	-
4.29(a) 5.25(Acoustic requirements - Determination of sound pressure levels(LpAeq))	-	10000	-
4.29(b) 5.25(Acoustic requirements - Determination of sound pressure levels(LAFmax))	-	10000	-
4.29(c) 5.25(Acoustic requirements - Determination of sound pressure levels(LAFmax))	-	10000	-
4.29(d) 5.25(Acoustic requirements - Determination of sound pressure levels(LpAeq))	-	10000	-
4.29(e) 5.25(Acoustic requirements - Determination of sound pressure levels(Lpcpeak))	-	10000	-
4.29(f) 5.25(Acoustic requirements - Determination of sound pressure levels(Lpcpeak))	-	10000	-
4.29(g) 5.25(Acoustic requirements - Determination of sound pressure levels(Lpcpeak))	-	10000	-
4.29(h) 5.25(Acoustic requirements - Determination of sound pressure levels(Lpcpeak))	-	10000	-
4.29(h) 5.25(Acoustic requirements - Warning)	-	10000	-
4.30 ,4.30.1(Toys scooters - General)	-	10000	-
4.30.2(Toys scooters - Warning & instructions for use)	-	10000	-
4.30.3 -5.26(Toys scooters (Strength) - Static strength for toy scooters)	-	10000	-
4.30.3 -5.27(Toys scooters (Strength) - Dynamic strength for toy scooters)	-	10000	-
4.30.3 -5.8(Toys scooters (Strength) - Sharp-edge test)	-	10000	-
4.30.3 -5.9(Toys scooters (Strength) - Sharp-point test)	-	10000	-
4.30.3 -5.29(Toys scooters (Strength) - Strength of toy scooter steering tubes)	-	10000	-
4.30.4 -5.12.2(Toys scooters (Stability) - Sideways stability test,feet available for stabilization)	-	10000	-
4.30.5(Toys scooters (Adjustable & folding steering tubes and handlebars) -)	-	10000	-
4.30.6 -5.28(Toys scooters(Braking) - Brake performance for toy scooters)	-	10000	-
4.30.7(Toys scooters - Wheel size)	-	10000	-
4.30.8(Toys scooters (Projections) - Handlebars on toy scooters)	-	10000	-
4.30.8(Toys scooters (Projections) - Diameter of handlebar)	-	10000	-
4.31.2(Magnetic or electrical experimental sets intended for children 8 years & over- Warning)	-	10000	-
4.31.3(a) -5.32(All other toys with magnets & magnetic components - Magnetic flux index)	-	10000	-
4.31.3(a) -5.2(All other toys with magnets & magnetic components - Small part test)	-	10000	-
4.31.3(b) -5.34(All other toys with magnets & magnetic components(wooden toys) - Soaking test for magnets)	-	10000	-
4.31.3(c) -5.32(All other toys with magnets & magnetic components Magnetic flux index)	-	10000	-
4.31.3(c) -5.2(All other toys with magnets & magnetic components - Small part test)	-	10000	-
4.31.3(c) -5.31(All other toys with magnets & magnetic components - Tension test for magnets)	-	10000	-
4.31.3(c) -5.24.2(All other toys with magnets & magnetic components - Drop test)	-	10000	-
4.31.3(c) -5.24.3(All other toys with magnets & magnetic components - Tip-over test for large & bulky toys)	-	10000	-
4.31.3(c) -5.24.5(All other toys with magnets & magnetic components - Torque test)	-	10000	-
4.31.3(c) -5.24.6.2(All other toys with magnets & magnetic components - Tension test for seams in soft-filled toys, beanbag-type toys &other similarfilled toys)	-	10000	-
4.31.3(c) -5.24.6.1(All other toys with magnets & magnetic components - Tension test)	-	10000	-
4.31.3(c) -5.33(All other toys with magnets & magnetic components - Impact test for magnets)	-	10000	-
4.31.3(c) -5.24.7(All other toys with magnets & magnetic components - Compression test)	-	10000	-
4.31.3(c) -5.31(All other toys with magnets & magnetic components - Tension test for magnets)	-	10000	-
4.32 -5.38.2(Yo-yo balls - Measurement of initial length,lo)	-	10000	-
4.32 -5.38.1(Yo-yo balls - Measurement of elastic constant,k)	-	10000	-
4.33 -5.11.3(Staps intended to be worn fully or partially around the neck for children under 36 months - Breakaway feature separation test)	-	10000	-
4.34(Sledges and toboggans with cords for pulling - Warning)	-	10000	-
4.35,4.35.2,4.35.3 -5.39(Jaw entrapment in handles and steering wheels for children under 18 months - Jaw entrapment test)	-	10000	-
4.36, 4.36.1(Assembly (General))	-	10000	-
4.36.2(Toys intended to be assembled by a child)	-	10000	-
4.36.3(Toys intended to be assembled by an adult)	-	10000	-
4.36.4(Toys that are intended to be disassembled between uses)	-	10000	-
4.37(Functional toys)	-	10000	-
4.38(Toys intended to come into contact with food)	-	10000	-
4.39 -5.2(Inflatable toys - Small part test)	-	10000	-
9873 (Part - 3) Cl 4.1 - Table 1(Selenium (Se))	-	10000	-
9873 (Part - 3) Cl 4.1 - Table 1(Mercury (Hg))	-	10000	-
9873 (Part - 3) Cl 4.1 - Table 1(Lead (Pb))	-	10000	-
9873 (Part - 3) Cl 4.1 - Table 1(Chromium (Cr))	-	10000	-
9873 (Part - 3) Cl 4.1 - Table 1(Cadmium (Cd))	-	10000	-
9873 (Part - 3) Cl 4.1 - Table 1(Barium (Ba))	-	10000	-
9873 (Part - 3) Cl 4.1 - Table 1(Arsenic (As))	-	10000	-
9873 (Part - 3) Cl 4.1 - Table 1(Antimony (Sb))	-	10000	-
9873 (Part - 9) Cl 3(Vinyl in any part of the toy or childcare article that can be placed in mouth of a child under 4 years of age - a) Di-iso-Nonyl Phthalate (DINP), b) Di-iso-Decyl Phthalate (DIDP), c) Di-n-Octyl Phthalate (DNOP))	-	10000	-
9873 (Part - 9) Cl 3(Vinyl in toys or childcare articles - a) Bis-(2-ethlyhexyl) Phthalates (DEHP), b) Di-Butyl phthalate (DBP), c) Benzyl butyl Phthalate (BBP))	-	10000	-

08 May, 2028

-
Included w.e.f 01.04.2026

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 3564 (2025)

Hydraulically Regulated Door Closers - Specification Fifth Revision of IS 3564 Amalgamating IS 14912

1 to 7 (750 to 1600)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Closing Force)	-	20000	-
5.1 Table 1(Closing Moment Between 0° to 4°)	-	20000	-
5.1 Table 1(Closing Moment Between 88° to 92°)	-	20000	-
5.1 Table 1(Closing MomentAny Other Angle of Opening)	-	20000	-
5.1 Table 1(Opening Moment Between 0° to 60°, Nm)	-	20000	-
5.1 Table 1(Door Closer Efficiency Between 0° and 4°)	-	20000	-
5.2(Closing Speed)	-	20000	-
5.3(Latching Speed)	-	20000	-
5.4(Back Check)	-	20000	-
5.5(Delayed Closing)	-	20000	-
6 Table 1(Nominal Size ( Test Door Weight))	-	20000	-
6 Table 1(Nominal Size (Recommended Door Leaf Width))	-	20000	-
7.1(Material)	-	20000	-
7.2(Finish and Workmanship)	-	20000	-
9.1.2, 9.2(Angle of Operation)	-	20000	-
9.1.2, 9.3(Durability)	-	20000	-
9.1.2, 9.4, Table 1(Efficiency)	-	20000	-
9.1.2, 9.4,5.1 Table 1(Closing Moment Between 0° to 4°)	-	20000	-
9.1.2, 9.4,5.1 Table 1(Closing Moment Between 88° to 92°)	-	20000	-
9.1.2, 9.4,5.1 Table 1(Closing MomentAny Other Angle of Opening)	-	20000	-
9.1.2, 9.4,5.1 Table 1(Opening Moment Between 0° to 60°, Nm)	-	20000	-
9.1.2, 9.4,5.1 Table 1(Door Closer Efficiency Between 0° and 4°)	-	20000	-
9.1.2, 9.5(Fire Resistance)	-	20000	-
9.1.2, 9.5.2.1(Fire Resistance)	-	20000	-
9.1.2, 9.5.2.2(Hold open unit)	-	20000	-
9.1.2, 9.5.2.3(Control Regulator)	-	20000	-
9.1.2, 9.5.2.4(Closing Action)	-	20000	-
9.1.2, 9.5.2.5(Delayed Action)	-	20000	-
9.1.2, 9.5.2.6(Arm Assemblies)	-	20000	-
9.1.2, 9.6(Safety)	-	20000	-
9.1.2, 9.7(Corrosion Resistance)	-	20000	-
9.1.2, 9.7,5.1 Table 1(Door Closer Efficiency Between 0° and 4°)	-	20000	-
9.1.2, 9.8(Operation at extremes temperature)	-	20000	-
9.1.2, 9.8(Variation in closing time after extremes temperature ( -10°C ± 2°C))	-	20000	-
9.1.2, 9.8(Variation in closing time after extremes temperature ( 40°C ± 2°C))	-	20000	-
As per Clause 4(Types of hyraulic door closers)	-	20000	-
As per Clause 4.1 and Fig 1(A)/Fig 1(B)/Fig 1()C(Types of hyraulic door closers)	-	20000	-
As per Clause 4.2 and Fig (2)and Fig(3)(Types of hyraulic door closers)	-	20000	-
As per Clause 4.3(Types of hyraulic door closers)	-	20000	-
As per Clause 5.1(Functional Controls Of Door Closers)	-	20000	-
As per Clause 5.2(Functional Controls Of Door Closers)	-	20000	-
As per Clause 5.3 and Fig 5(Functional Controls Of Door Closers)	-	20000	-
As per Clause 5.4 and Fig 5(Functional Controls Of Door Closers)	-	20000	-
As per Clause 5.5 and Fig 5(Functional Controls Of Door Closers)	-	20000	-
As per Clause 6 And Table 1(Nominal Sizes)	-	20000	-
As per Clause 7(Materials , Finish and Workmanship)	-	20000	-
As per Clause 8.1(Classification Code)	-	20000	-
As per Clause 8.2(Classification Code)	-	20000	-
As per Clause 8.3(Classification Code)	-	20000	-
As per Clause 8.4(Classification Code)	-	20000	-
As per Clause 8.5(Classification Code)	-	20000	-
As per Clause 8.6(Classification Code)	-	20000	-
As per Clause 8.7(Classification Code)	-	20000	-
As per Clause 9.1(PERFORMANCE REQUIREMENTS)	-	20000	-
As per Clause 9.2(PERFORMANCE REQUIREMENTS)	-	20000	-
As per Clause 9.3(PERFORMANCE REQUIREMENTS)	-	20000	-
As per Clause 9.4(PERFORMANCE REQUIREMENTS)	-	20000	-
As per Clause 9.5(PERFORMANCE REQUIREMENTS)	-	20000	-
As per Clause 9.6(PERFORMANCE REQUIREMENTS)	-	20000	-
As per Clause 9.7(PERFORMANCE REQUIREMENTS)	-	20000	-
As per Clause 9.8(PERFORMANCE REQUIREMENTS)	-	20000	-
As per Clause 11(Marking)	-	20000	-
5.1(Closing Force)	-	-	-
5.1 Table 1(Closing Moment Between 0° to 4°)	-	-	-
5.1 Table 1(Closing Moment Between 88° to 92°)	-	-	-
5.1 Table 1(Closing MomentAny Other Angle of Opening)	-	-	-
5.1 Table 1(Opening Moment Between 0° to 60°, Nm)	-	-	-
5.1 Table 1(Door Closer Efficiency Between 0° and 4°)	-	-	-
5.2(Closing Speed)	-	-	-
5.3(Latching Speed)	-	-	-
5.4(Back Check)	-	-	-
5.5(Delayed Closing)	-	-	-
6 Table 1(Nominal Size ( Test Door Weight))	-	-	-
6 Table 1(Nominal Size (Recommended Door Leaf Width))	-	-	-
7.1(Material)	-	-	-
7.2(Finish and Workmanship)	-	-	-
9.1.2, 9.2(Angle of Operation)	-	-	-
9.1.2, 9.3(Durability)	-	-	-
9.1.2, 9.4, Table 1(Efficiency)	-	-	-
9.1.2, 9.4,5.1 Table 1(Closing Moment Between 0° to 4°)	-	-	-
9.1.2, 9.4,5.1 Table 1(Closing Moment Between 88° to 92°)	-	-	-
9.1.2, 9.4,5.1 Table 1(Closing MomentAny Other Angle of Opening)	-	-	-
9.1.2, 9.4,5.1 Table 1(Opening Moment Between 0° to 60°, Nm)	-	-	-
9.1.2, 9.4,5.1 Table 1(Door Closer Efficiency Between 0° and 4°)	-	-	-
9.1.2, 9.5(Fire Resistance)	-	-	-
9.1.2, 9.5.2.1(Fire Resistance)	-	-	-
9.1.2, 9.5.2.2(Hold open unit)	-	-	-
9.1.2, 9.5.2.3(Control Regulator)	-	-	-
9.1.2, 9.5.2.4(Closing Action)	-	-	-
9.1.2, 9.5.2.5(Delayed Action)	-	-	-
9.1.2, 9.5.2.6(Arm Assemblies)	-	-	-
9.1.2, 9.6(Safety)	-	-	-
9.1.2, 9.7(Corrosion Resistance)	-	-	-
9.1.2, 9.7,5.1 Table 1(Door Closer Efficiency Between 0° and 4°)	-	-	-
9.1.2, 9.8(Operation at extremes temperature)	-	-	-
9.1.2, 9.8(Variation in closing time after extremes temperature ( -10°C ± 2°C))	-	-	-
9.1.2, 9.8(Variation in closing time after extremes temperature ( 40°C ± 2°C))	-	-	-
As per Clause 4(Types of hyraulic door closers)	-	-	-
As per Clause 4.1 and Fig 1(A)/Fig 1(B)/Fig 1()C(Types of hyraulic door closers)	-	-	-
As per Clause 4.2 and Fig (2)and Fig(3)(Types of hyraulic door closers)	-	-	-
As per Clause 4.3(Types of hyraulic door closers)	-	-	-
As per Clause 5.1(Functional Controls Of Door Closers)	-	-	-
As per Clause 5.2(Functional Controls Of Door Closers)	-	-	-
As per Clause 5.3 and Fig 5(Functional Controls Of Door Closers)	-	-	-
As per Clause 5.4 and Fig 5(Functional Controls Of Door Closers)	-	-	-
As per Clause 5.5 and Fig 5(Functional Controls Of Door Closers)	-	-	-
As per Clause 6 And Table 1(Nominal Sizes)	-	-	-
As per Clause 7(Materials , Finish and Workmanship)	-	-	-
As per Clause 8.1(Classification Code)	-	-	-
As per Clause 8.2(Classification Code)	-	-	-
As per Clause 8.3(Classification Code)	-	-	-
As per Clause 8.4(Classification Code)	-	-	-
As per Clause 8.5(Classification Code)	-	-	-
As per Clause 8.6(Classification Code)	-	-	-
As per Clause 8.7(Classification Code)	-	-	-
As per Clause 9.1(PERFORMANCE REQUIREMENTS)	-	-	-
As per Clause 9.2(PERFORMANCE REQUIREMENTS)	-	-	-
As per Clause 9.3(PERFORMANCE REQUIREMENTS)	-	-	-
As per Clause 9.4(PERFORMANCE REQUIREMENTS)	-	-	-
As per Clause 9.5(PERFORMANCE REQUIREMENTS)	-	-	-
As per Clause 9.6(PERFORMANCE REQUIREMENTS)	-	-	-
As per Clause 9.7(PERFORMANCE REQUIREMENTS)	-	-	-
As per Clause 9.8(PERFORMANCE REQUIREMENTS)	-	-	-
As per Clause 11(Marking)	-	-	-

31 Dec, 2026

-
Included w.e.f 01.04.2026

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 6315 (2025)

Hydraulically Regulated Floor Springs - Specification Third Revision of IS 6315 ICS 91190

1 to 7(750 to 1600) mm

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As per Clause 4.1.1(TYPES OF HYDRAULIC FLOOR SPRINGS)	-	20000	-
As per Clause 4.1.2(TYPES OF HYDRAULIC FLOOR SPRINGS)	-	20000	-
As per Clause 5(CONSTRUCTION OF FLOOR SPRING AND ACCESSORIES)	-	20000	-
As per Clause 6.1(FUNCTIONAL CONTROLS OF FLOOR SPRINGS)	-	20000	-
As per Clause 6.2(FUNCTIONAL CONTROLS OF FLOOR SPRINGS)	-	20000	-
As per Clause 6.3(FUNCTIONAL CONTROLS OF FLOOR SPRINGS)	-	20000	-
As per Clause 6.4(FUNCTIONAL CONTROLS OF FLOOR SPRINGS)	-	20000	-
As per Clause 6.5(FUNCTIONAL CONTROLS OF FLOOR SPRINGS)	-	20000	-
As per Clause 7 And Table 1(Nominal Sizes)	-	20000	-
As per Clause 8(Materials , Finish and Workmanship)	-	20000	-
As per Clause 9.1(Classification Code)	-	20000	-
As per Clause 9.2(Classification Code)	-	20000	-
As per Clause 9.3(Classification Code)	-	20000	-
As per Clause 9.4(Classification Code)	-	20000	-
As per Clause 9.5(Classification Code)	-	20000	-
As per Clause 9.6(Classification Code)	-	20000	-
As per Clause 9.7(Classification Code)	-	20000	-
As per Clause 10.1(PERFORMANCE REQUIREMENTS)	-	20000	-
As per Clause 10.2(PERFORMANCE REQUIREMENTS)	-	20000	-
As per Clause 10.3(PERFORMANCE REQUIREMENTS)	-	20000	-
As per Clause 10.4(PERFORMANCE REQUIREMENTS)	-	20000	-
As per Clause 10.5(PERFORMANCE REQUIREMENTS)	-	20000	-
As per Clause 10.6(PERFORMANCE REQUIREMENTS)	-	20000	-
As per Clause 10.7(PERFORMANCE REQUIREMENTS)	-	20000	-
As per Clause 10.8(PERFORMANCE REQUIREMENTS)	-	20000	-
As per Clause 12(Marking)	-	20000	-

31 Dec, 2026

-
Included w.e.f 01.04.2026

Kailtech Test and Research Centre Pvt. Ltd., Indore

8125636

IS 16047 : Part 3 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Secondary Lithium Cells and Batteries for Portable Applications Part 3 Prismatic and Cylindrical Lithium Secondary Cells, and Batteries Made From Them ( First Revision )

350000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3.1(Discharge Performance at 20°C (Rated Capacity))	-	10000	-
7.1, 7.2(Charging Procedure for Test Purpose)	-	5000	-
5(Cell Designation and Marking)	-	1000	-
7.3.2("Discharge Performance at -20°C ")	-	12000	-
7.3.3(High Rate Discharge Performance at 20°C)	-	12000	-
7.4(Charge (capacity) Retention and Recovery)	-	15000	-
7.5(Charge (Capacity) Recovery After Long Term Storage)	-	20000	-
7.6.2(Endurance In Cycles at a Rate of 0.2It A)	-	160000	-
7.6.3("Endurance in Cycles at a Rate of 0.5It A (Accelerated Test Procedure) ")	-	160000	-
7.7(Battery Internal Resistance)	-	7000	-

18 Dec, 2027

-
Included w.e.f 01.04.2026 Exclusion: 7.8 (Electrostatic Discharge (ESD))

CIPET, KOCHI

6137634

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

20555 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Mass of Bale)	-	0	-
5.2 Table 1(Dimensions)	-	375	25% discount on test charges
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Dimensions)	-	0	-
5.2 Table 1(Picks per dm)	-	375	25% discount on test charges
5.2 Table 1(Ends per dm)	-	0	-
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	375	25% discount on test charges
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	1075	25% discount on test charges+ specimen preparation charges
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	1075	25% discount on test charges+ specimen preparation charges
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1075	25% discount on test charges+ specimen preparation charges
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0	-
5.2 Table 1(Drop impact strength)	-	825	25% discount on test charges
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	900	25% discount on test charges
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	0	-
4.6(Capacity)	-	375	25% discount on test charges
4.3.1(Bottom Seam)	-	375	25% discount on test charges
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	1075	25% discount on test charges+ specimen preparation charges
4.3(Sacks)	-	375	25% discount on test charges
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	10180	-
4.2(Linear Density)	-	525	25% discount on test charges
4.2(Width of tape)	-	375	25% discount on test charges
Cl-4.4(Lamination Mass)	-	0	-
Cl-4.5(Liner- Thickness)	-	0	-
Cl-4.2 (Amendment No-2)(un-laminated fabric mass)	-	0	-
Cl-4.5(Liner- Width)	-	0	-
Cl-4.5(Liner- Visible defects)	-	0	-

31 Dec, 2026

-
Included w.e.f.01.04.2026

JBS TESTING SOLUTIONS (Unit-2) (24), Jalandhar

9172306

IS 4665 : Part 2 : Sec 6 (2023)

Hand-Held Motor-Operated Electric Tools - Safety Part 2 Particular Requirements Section 6 Hammers

120000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Requirements)	-	0	-
5(General Conditions for the test )	-	0	-
7(Void )	-	0	-
8(Marking and Instructions)	-	2000	-
9(Protection against access to live parts)	-	5000	-
10(Starting)	-	5000	-
11(Input and current)	-	5000	-
12(Heating)	-	8000	-
13(Leakage current)	-	5000	-
14(Moisture resistance)	-	8000	-
15( Electric strength)	-	5000	-
16(Overload protection of transformers and associated circuits)	-	5000	-
17(Endurance)	-	10000	-
18(Abnormal operation)	-	7000	-
19(Mechanical hazards)	-	5000	-
20(Mechanical strength)	-	10000	-
21(Construction)	-	6000	-
22(Internal wiring)	-	5000	-
23(Components)	-	5000	-
24(Supply connection and external flexible cords)	-	5000	-
25(Terminals for external conductors)	-	3000	-
26(Provision for earthing)	-	4000	-
27(Screws and connections)	-	2000	-
28(Creepage distances, clearances and distances through insulation)	-	2000	-
29(Resistance to heat, fire and tracking)	-	6000	-
30(Resistance to rusting)	-	4000	-
31(Radiation, toxicity and similar hazards)	-	0	-

22 May, 2029

-
Included w.e.f 01.04.2026

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 6913 (2023)

Stainless steel tubes for the food, beverage, dairy and pharmaceutical industry ï¿½ Specification

22200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Manufacture)	-	500	-
Cl-7(Heat Treatment)	-	0	-
Cl-8.1, 8.2, Table-2(C Max)	-	500	-
Cl-8.1, 8.2, Table-2(Si Max)	-	500	-
Cl-8.1, 8.2, Table-2(Mn Max)	-	500	-
Cl-8.1, 8.2, Table-2(Ni)	-	500	-
Cl-8.1, 8.2, Table-2(Cr)	-	500	-
Cl-8.1, 8.2, Table-2(Mo)	-	500	-
Cl-8.1, 8.2, Table-2(S Max)	-	500	-
Cl-8.1, 8.2, Table-2(P Max)	-	500	-
Cl-8.1, 8.2, Table-2(N Max)	-	500	-
Cl-8.1, 8.2, Table-2(Cu Max)	-	500	-
Cl-9.1, Table-4(Thickness- Welded/heavily cold worked)	-	1000	-
Cl-9.1, Table-4(Thickness-Seamless)	-	1000	-
Cl-10.1(Outside Diameter)	-	1000	-
Cl-10.2(Wall Thickness)	-	500	-
Cl-11.1(Finished tubes)	-	1500	-
Cl-11.3(Critical Surface Finish)	-	1500	-
Cl-11.4(Types of Surface Finishes)	-	0	-
Cl-12(Tensile and hardness tests)	-	5000	-
Cl-13(Reverse flattening test)	-	2500	-
Cl-14(hydrostatic test)	-	3000	-
Cl-15.1(Intergranular Corrosion Test)	-	3500	-
Cl-15.2(Flaring Test (for Seamless Tubes))	-	1500	-
Cl-15.3(Flange Test (for Welded Tubes))	-	1500	-
Cl-15.4(Flattening Test)	-	1500	-
Cl-15.5(chemical cleaning or passivation)	-	1500	-
Cl-16(Retests)	-	0	-
Cl-17(Hygienic Conditions)	-	0	-
Cl-19(Marking)	-	0	-

-
Included w.e.f 01.04.2026

JBS TESTING SOLUTIONS (Unit-2) (24), Jalandhar

9172306

IS 4665 : Part 2 : Sec 3 (2023)

Hand-held motor-operated electric tools - Safety Part 2 Particular requirements Section 3 grinders polishers and disk-type sanders

120000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General Requirements)	-	0	-
6(Void)	-	0	-
8(Marking and Instructions )	-	2000	-
9(Protection against access to live parts)	-	5000	-
10(Starting)	-	5000	-
11(Input and current)	-	5000	-
12(Heating)	-	8000	-
13(Leakage current)	-	5000	-
14(Moisture resistance)	-	8000	-
15( Electric strength)	-	5000	-
16(Overload protection of transformers and associated circuits)	-	5000	-
17(Endurance)	-	10000	-
18(Abnormal operation)	-	7000	-
19(Mechanical hazards)	-	5000	-
20(Mechanical strength)	-	10000	-
21(Construction)	-	6000	-
22(Internal wiring)	-	5000	-
23(Components)	-	5000	-
24(Supply connection and external flexible cords)	-	5000	-
25(Terminals for external conductors)	-	3000	-
26(Provision for earthing)	-	4000	-
27(Screws and connections)	-	2000	-
28(Creepage distances, clearances and distances through insulation)	-	2000	-
29(Resistance to heat, fire and tracking)	-	6000	-
30(Resistance to rusting)	-	4000	-
31(Radiation, toxicity and similar hazards)	-	0	-

22 May, 2029

-
Included w.e.f 01.04.2026

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 1470 (2025)

Silicomanganese Specification ( Fifth Revision )

High carbon, medium carbon, Low Carbon

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause. 7.2.1, 7.2.2, 7.2.3(Carbon)	-	18000	-
Clause. 7.2.1, 7.2.2, 7.2.3(Manganese)	-	18000	-
Clause. 7.2.1, 7.2.2, 7.2.3(Silicon)	-	18000	-
Clause. 7.2.1, 7.2.2, 7.2.3(Sulphur)	-	18000	-
Clause. 7.2.1, 7.2.2, 7.2.3(Phosphorus)	-	18000	-
Clause. 7.2.1, 7.2.2, 7.2.3(Aluminium)	-	18000	-
Clause. 7.2.1, 7.2.2, 7.2.3(Titanium)	-	18000	-
Clause. 7.2.1, 7.2.2, 7.2.3(Boron)	-	18000	-
Clause. 8.1(Partical size)	-	18000	-

31 Dec, 2026

-
Included w.e.f 01.04.2026

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 738 (1994)

Wrought aluminium alloys, drawn tube for general engineering purposes - Specification (Third Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6(Freedom from Defects- Cl.6)	-	500	-
Cl.7, IS 2678(Wall Thickness at any point)	-	500	-
Cl.7, IS 2678(Mean Wall Thickness)	-	500	-
Cl.7, IS 2678(Straightness)	-	500	-
Cl. 9.1 Table 2(0.2 percent proof stress- IS 2657)	-	3000	-
Cl. 9.1 Table 2(Tensile Strength- IS 2657)	-	3000	-
Cl. 9.1 Table 2(Elongation on guage length of 50 mm)	-	3000	-
Cl. 9.1.2(Flattening Test- IS 2328)	-	3000	-
Cl. 8.1, Table 1(Aluminium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Copper- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Magnesium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Silicon- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Iron- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Manganese- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Zinc- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Titanium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Chromium- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 1(Ti+ V (Remarks)- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 2(T. I.(Remarks)- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 3(Ti+ Cr (Remarks)- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
Cl. 8.1, Table 4(Cr+ Mn (Remarks)- IS 504 : 1963 or 1S 11085 : 1984 or any other established instrumental/chemical method. )	-	1000	-
10(Marking)	-	1000	-

-
Included w.e.f 01.04.2026

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 737 (2024)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Ordering Information - IS 737)	-	0	-
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	0	-
Cl. 4 (b)(Condition - IS 737)	-	0	-
Cl. 4 (c)(Quantity in Kg - IS 737)	-	0	-
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	0	-
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	0	-
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	0	-
Cl. 4 (g)(Packing Mode - IS 737)	-	0	-
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	0	-
Cl. 6(Freedom from Defects - IS 737)	-	500	-
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	-
Cl. 7(Al - IS 504)	-	500	-
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	1500	-
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	1500	-
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	1500	-
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	1500	-
Cl. 8.2(Bend Test - IS 1599)	-	1500	-
Cl. 9(Condition - IS 737/ IS 5052)	-	0	-
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	1500	-
Cl. 11(Selection of Test Samples - IS 737)	-	0	-
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	500	-
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	500	-
Cl. 12(Retests - IS 737/ IS 10259)	-	0	-
Cl. 13(Packaging - IS 737/ IS 10259)	-	0	-
Cl. 13.1(Marking - IS 737)	-	0	-

-
Included w.e.f 01.04.2026

Alpha Test House Services LLP (160), Sahibzada Ajit Singh Nagar

9138706

IS 13387 (1992)

Tool steel forgings for metal forming - Specification

UP to 200 Dia

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11(Hardness)	-	17000	-
9.1 Table 1(machining allowance)	-	17000	-
8(Freedom from defect)	-	17000	-
Cl. 10(Tin)	-	17000	-
Cl. 10(Copper)	-	17000	-
Cl. 10(Boron)	-	17000	-
Cl. 10(Vanadium)	-	17000	-
Cl. 10(Oxygen)	-	0	-
Cl. 10(Tungsten)	-	17000	-
Cl. 10(Molybdenum)	-	17000	-
Cl. 10(Nickel)	-	17000	-
Cl. 10(Chromium)	-	17000	-
Cl. 10(Phosphorus)	-	17000	-
Cl. 10(Sulphur)	-	17000	-
Cl. 10(Manganese)	-	17000	-
Cl. 10(Silicon)	-	17000	-
Cl. 10(Carbon)	-	17000	-

31 Dec, 2026

-
Included w.e.f 01.04.2026 Exclusion- Cl. 10 (Oxygen)

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 736 (1986)

Specification for wrought aluminium and aluminium alloy plate for general engineering purposes (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Freedom from defect)	-	500	-
5(chemical composition)	-	5000	-
6.1 table 2(0.2% proof strength)	-	1500	-
6.1 table 2(tensile strength)	-	1500	-
6.1 table 2(Elongation)	-	1500	-
8(Dimensions & Tolerances)	-	1500	-
5.1, Table 1(Aluminium)	-	1500	-
5.1, Table 1(Copper)	-	1500	-
5.1, Table 1(Magnesium)	-	1500	-
5.1, Table 1(Silicon)	-	1500	-
5.1, Table 1(Iron)	-	1500	-
5.1, Table 1(Mangnese)	-	1500	-
5.1, Table 1(Zinc)	-	1500	-
5.1, Table 1(Titanium and /or other grain refining element)	-	1500	-
5.1, Table 1(Chromium)	-	1500	-
5.1, Table 1(Vanadium)	-	1500	-
Cl. 5.1 Table 1,(Chromium + Manganese)	-	1500	-
Cl. 5.1 Table 1,(Copper + Silicon + Iron + Manganese)	-	1500	-

-
Included w.e.f 01.04.2026

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 6649 (1985)

Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision)

all sizes

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3 Table-1(Dimensions Type A- d1)	-	2000	-
3 Table-1(Dimensions Type A- d2)	-	2000	-
3 Table-1(Dimensions Type A- S)	-	2000	-
3 Table-2(Dimensions Type B&C- d)	-	2000	-
3 Table-2(Dimensions Type B&C- a)	-	2000	-
3 Table-2(Dimensions Type B&C- t)	-	2000	-
3 Table-2(Dimensions Type B&C- θ)	-	2000	-
3.1(Deviation)	-	2000	-
3.2(Concentric)	-	2000	-
3.3(Clearance)	-	2000	-
5(Chemical Composition- Sulphur)	-	8000	-
5(Chemical Composition- Phosphorus)	-	8000	-
7(Hardness)	-	1000	-
8(Finish)	-	1000	-
8.1(Freedom from defect)	-	1000	-
8.1(Uniformity of zinc coating)	-	1000	-
8.1(Mass of zinc coating)	-	1000	-
8.1(Knife test (Adhesion of coating))	-	1000	-

19 Jun, 2028

-
Included w.e.f 24.03.2026

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 3063 (1994)

Fasteners - Single coil rectangular section spring lock washers specification (Second Revision)

ALL SIZES

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Dimensions & Tolerance)	-	2000	-
5(Material Testing)	-	4000	-
11(Hardness (HV))	-	1000	-
11.2(Permanent set test)	-	1000	-
11.3(Permanent Load test)	-	1000	-
11.4(Twist test)	-	1000	-

19 Jun, 2028

-
Included w.e.f 24.03.2026

Atckon Laboratories LLP, Bahadurgarh

8186436

IS 2016 (1967)

Specification for plain washers (First Revision)

ALL SIZES

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Material)	-	1000	-
2.2(Workmanship)	-	1000	-
3(Designation)	-	1000	-
4(Dimensions)	-	1000	-
5(Finish)	-	1000	-
7(Marking)	-	1000	-

19 Jun, 2028

-
Included w.e.f 24.03.2026

CIPET, KOCHI

6137634

IS 9755 (2021)

Textiles - High Density Polyethylene (HDPE) / Polypropylene (pp) Woven Sacks for Packing Fertilizers

29568 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.6(Drop Impact Test)	-	825	25% discount on test charges
4.1(Raw Meterial)	-	1500	25% discount on test charges
4.2("Fabric a) Width of Tape")	-	375	25% discount on test charges
4.2("Fabric b) Linear Density")	-	375	25% discount on test charges
4.2("Fabric c) Mesh")	-	375	25% discount on test charges
4.2("Fabric c) Mesh")	-	0	-
4.2("Fabric d) Unlaminated Fabric Mass")	-	375	25% discount on test charges
4.3(Sacks)	-	225	25% discount on test charges
4.4.1(Loose Liner)	-	1500	25% discount on test charges
4.4.1(Thickness of Linear)	-	375	25% discount on test charges
4.4.2(Visual Observation)	-	225	25% discount on test charges
4.4.3(Bottom Seam of Loose Liner)	-	225	25% discount on test charges
4.5(Mass of The Lamination)	-	375	25% discount on test charges
4.5(Laminated Fabric)	-	375	25% discount on test charges
4.5(Lamination Over Hang of the fabric after trimming)	-	375	25% discount on test charges
4.6.1(Distance between the Two Row of Stitches)	-	375	25% discount on test charges
4.6.1(Distance of outer stitch from the edge of the bag)	-	375	25% discount on test charges
4.6.1(Depth of the Stitch( Double fold))	-	375	25% discount on test charges
4.6.1(No.of Stitches/dm)	-	375	25% discount on test charges
4.6.2(Breaking Load of the stitching material Non UV Stabilized sack)	-	975	25% discount on test charges
4.6.2(Breaking Load for UV Stabilized sack)	-	0	25% discount on test charges
4.7(Mouth of the Sack)	-	188	25% discount on test charges
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension a) Inside Length Type 1 & Type 2 ")	-	375	25% discount on test charges
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension b) Inside Width ")	-	375	25% discount on test charges
"Table 1 of Cl. No.5.1 Sl. No. ii"(Ends/dm ( Type 1 & Type 2))	-	375	25% discount on test charges
"Table 1 of Cl. No.5.1 Sl. No. iii"(Picks /dm ( Type 1 & Type 2))	-	0	-
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric a) Unlaminated Sack( Type 1 & Type 2)")	-	375	25% discount on test charges
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric b) Laminated Sack( Type 1 & Type 2)")	-	0	-
"Table 1 of Cl. No.5.3 Sl. No. v"(Mass of Sack( Type 1 & Type 2))	-	375	25% discount on test charges
"Table 1 of Cl. No.5.4 Sl. No. vi"(Avg. Breaking Strength Of fabric (Ravelled strip method)( 325mm X 25 mm))	-	1225	25% discount on test charges +specimen preparation charges
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric a)Length(Type 1 & Type 2)")	-	0	-
"Table 1 of Cl. No.5.4 Sl. No. vii"(Breaking Strength of Bottom Seam (Ravelled strip method))	-	1225	25% discount on test charges +specimen preparation charges
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric b) Width(Type 1 & Type 2)")	-	1225	25% discount on test charges +specimen preparation charges
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content a) For UV Stabilized Sack")	-	900	25% discount on test charges
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content b) For Non- UV Stabilized Sack")	-	0	-
"Table 1 of Cl. No.5.6 Sl. No. x"(Drop Impact Strength)	-	0	-
Cl. No.5.2(Visual Observation)	-	225	25% discount on test charges
Cl. No.5.3(Mass of Bale)	-	0	-
Cl. No.5.4(Breaking Strength of Fabric)	-	0	-
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	0	-
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	0	-
Cl. No.5.5("Ash Content b) For Non- UV Stabilized Sack")	-	0	-
Cl. No.5.6(Drop Impact testing of filled sack)	-	0	-
Cl. No.5.7(UV Resistance)	-	12380	Specimen conditioning charge+ breaking strength test charges
Cl. No.6.1(Printing on Sacks)	-	225	25% discount on test charges
Cl. No.6.3.(Marking on the Bale)	-	0	-
Cl. No.6.4.(BIS Certification Marking)	-	0	-
Cl. No.6.5.(Storage)	-	0	-
Cl. No.6.2.(Packaging)	-	0	-
5.6(Drop Impact Test)	-	-	-
4.1(Raw Meterial)	-	-	-
4.2("Fabric a) Width of Tape")	-	-	-
4.2("Fabric b) Linear Density")	-	-	-
4.2("Fabric c) Mesh")	-	-	-
4.2("Fabric c) Mesh")	-	-	-
4.2("Fabric d) Unlaminated Fabric Mass")	-	-	-
4.3(Sacks)	-	-	-
4.4.1(Loose Liner)	-	-	-
4.4.1(Thickness of Linear)	-	-	-
4.4.2(Visual Observation)	-	-	-
4.4.3(Bottom Seam of Loose Liner)	-	-	-
4.5(Mass of The Lamination)	-	-	-
4.5(Laminated Fabric)	-	-	-
4.5(Lamination Over Hang of the fabric after trimming)	-	-	-
4.6.1(Distance between the Two Row of Stitches)	-	-	-
4.6.1(Distance of outer stitch from the edge of the bag)	-	-	-
4.6.1(Depth of the Stitch( Double fold))	-	-	-
4.6.1(No.of Stitches/dm)	-	-	-
4.6.2(Breaking Load of the stitching material Non UV Stabilized sack)	-	-	-
4.6.2(Breaking Load for UV Stabilized sack)	-	-	-
4.7(Mouth of the Sack)	-	-	-
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension a) Inside Length Type 1 & Type 2 ")	-	-	-
"Table 1 of Cl. No.5.1 Sl. No. i"("Dimension b) Inside Width ")	-	-	-
"Table 1 of Cl. No.5.1 Sl. No. ii"(Ends/dm ( Type 1 & Type 2))	-	-	-
"Table 1 of Cl. No.5.1 Sl. No. iii"(Picks /dm ( Type 1 & Type 2))	-	-	-
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric a) Unlaminated Sack( Type 1 & Type 2)")	-	-	-
"Table 1 of Cl. No.5.3 Sl. No. iv"("Mass of Fabric b) Laminated Sack( Type 1 & Type 2)")	-	-	-
"Table 1 of Cl. No.5.3 Sl. No. v"(Mass of Sack( Type 1 & Type 2))	-	-	-
"Table 1 of Cl. No.5.4 Sl. No. vi"(Avg. Breaking Strength Of fabric (Ravelled strip method)( 325mm X 25 mm))	-	-	-
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric a)Length(Type 1 & Type 2)")	-	-	-
"Table 1 of Cl. No.5.4 Sl. No. vii"(Breaking Strength of Bottom Seam (Ravelled strip method))	-	-	-
"Table 1 of Cl. No.5.1 Sl. No. viii"("Elongation at Break of fabric b) Width(Type 1 & Type 2)")	-	-	-
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content a) For UV Stabilized Sack")	-	-	-
"Table 1 of Cl. No.5.5 Sl. No. ix"("Ash Content b) For Non- UV Stabilized Sack")	-	-	-
"Table 1 of Cl. No.5.6 Sl. No. x"(Drop Impact Strength)	-	-	-
Cl. No.5.2(Visual Observation)	-	-	-
Cl. No.5.3(Mass of Bale)	-	-	-
Cl. No.5.4(Breaking Strength of Fabric)	-	-	-
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	-	-
Cl. No.5.5("Ash Content a) For UV Stabilized Sack")	-	-	-
Cl. No.5.5("Ash Content b) For Non- UV Stabilized Sack")	-	-	-
Cl. No.5.6(Drop Impact testing of filled sack)	-	-	-
Cl. No.5.7(UV Resistance)	-	-	-
Cl. No.6.1(Printing on Sacks)	-	-	-
Cl. No.6.3.(Marking on the Bale)	-	-	-
Cl. No.6.4.(BIS Certification Marking)	-	-	-
Cl. No.6.5.(Storage)	-	-	-
Cl. No.6.2.(Packaging)	-	-	-

31 Dec, 2026

-
Included w.e.f.01.04.2026

INDIAN TESTING LABORATORY PRIVATE LIMITED, GREATER NOIDA

8171306

IS 5758 (2020)

Precast Concrete Kerbs, Channels, Edging, Quadrants and Other Associated Fittings - Specification ( Second Revision )

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Shape and Dimensions)	-	200	-
4.4(Manufacturing of Units)	-	200	-
4.5(Units with Special Faces)	-	200	-
4.6(End Treatment)	-	200	-
5(Designation and Size)	-	200	-
6.2(Deviations on Flatness and Straightness)	-	500	-
7.1(Cement)	-	500	-
7.2.1(Fine and coarse aggregates)	-	500	-
7.2.2(The maximum size of coarse aggregates)	-	500	-
7.3(Pulverized Fuel Ash)	-	500	-
7.4(Ground Granulated Blast Furnace Slag)	-	500	-
7.5(Additives or Admixtures)	-	500	-
7.6.1(Green pigment)	-	500	-
7.6.1(Blue pigment)	-	500	-
7.6.1(White pigment)	-	500	-
9.1(General)	-	500	-
9.2(Dimensions)	-	500	-
9.3(Bending Strength)	-	1000	-
9.4(Water Absorption)	-	1000	-
11(CRITERIA FOR CONFORMITY)	-	500	-
12(RETESTS)	-	500	-
13(Facilities for Sampling and Testing)	-	500	-
14(MANUFACTURER’S CERTIFICATE)	-	500	-
15(Marking)	-	500	-
7.6.1(Black or Red or Brown pigment)	-	500	-
7.6.1(Yellow pigment)	-	500	-

15 Aug, 2028

-
Included w.e.f.01.04.2026

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number