BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15324 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

EMC Testing and Compliance LLP, Gurugram

8141526

IS 17524 (2021)

Castors and Wheels - Requirements for Castors for Swivel Chairs

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1(Characteristics)	-	500	-
Clause 4.2(Fixing system)	-	500	-
Clause 4.3(Castor type)	-	500	-
Clause 4.4(Dimensions)	-	1000	-
Clause 5.1(General)	-	1000	-
Clause 5.3(Impact performance)	-	5000	-
Clause 5.4(Electrical resistance)	-	5000	-
Clause 5.5(Contact pressure)	-	5000	-
Clause 5.6(Stem retention)	-	5000	-
Clause 5.7("Static load performance")	-	5000	-
Clause 5.8(Brake performance)	-	5000	-
Clause 5.9(Dynamic)	-	5000	-
Clause 5.10(Castors and Wheels - Requirements for Castors for Swivel Chairs)	-	5000	-
Clause 5.11(Rolling resistance)	-	5000	-
Clause 5.12(Swivel resistance)	-	5000	-
Clause 7(Marking)	-	1000	-

19 Jul, 2027

-
Included w.e.f.01.04.2026

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 12701 (1996)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

UPTO 20000 LTR

18375.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Density)	-	700.00	-
4.2.2(MFI)	-	1100.00	-
4.2.3(Carbon Black Content )	-	925.00	-
4.2.3(Carbon Dispersion Test)	-	700.00	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500.00	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500.00	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500.00	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500.00	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500.00	-
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	500.00	-
5.3(Types and Features )	-	500.00	-
5.4(Wall Thickness)	-	500.00	-
5.2 Table 2 (7)(Minimum Wall Thickness)	-	500.00	-
6.1(Finish)	-	500.00	-
7.1.1(Resistance to Deformation)	-	700.00	-
7.2(Resistance to Impact)	-	1100.00	-
7.3(Test for Top Load Resistance)	-	900.00	-
7.4(Tensile Strength)	-	1800.00	Test Charge- 1300.00 SAMPLE PREPARATION - 500.00
7.5(Flexural Modulus)	-	1600.00	Test Charge- 1100.00 SAMPLE PREPARATION - 500.00
7.6(overall Migration)	-	2200.00	Test Charge- 1700.00 SAMPLE PREPARATION - 500.00
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	500.00	-
5(Types and Features )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.2 Table 2(Dimensions of Rectangular Loft Tanks)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.6(Types and Features )	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
7.1.2(Resistance to Deformation)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
7.6(overall Migration)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
9.2.1(Man-Hole and Hand-Hole Lids)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
9.2(Man-Hole and Hand-Hole Lids)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
9.1(Man-Hole and Hand-Hole Lids)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
9.1(Lid Thickness)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
7.3(Test for Top Load Resistance)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
6.1(Finish)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.4(Wall Thickness above effective height)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.1 Table 1 (7)(Minimum Weight of Tank (Without Lid))	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
4.1(MATERIALS)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
4.2.1(Density)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
10(MARKING)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
Cl-7.6(Overall Migration)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
4.2.2(MFR)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.
5.1 Table 1(Dimensioas of Cylinderical Vertical Tank)	-	0.00	TEST CHARGES FOR ABOVE PARAMETER ALREADY TAKEN.

24 Apr, 2027

-
-

JBS TESTING SOLUTIONS (Unit-2) (24), Jalandhar

9172306

IS 8472 (2019)

Centrifugal regenerative pumps for clear, cold water - Specification (Second Revision)

Upto 2.2 KW

10200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
16.1(Marking)	-	10200	For complete testing
12.1(Pump Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	10200	For complete testing
12.1(Pump Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	10200	For complete testing
12.1(Pump Tests Cl.8 of IS 11346-2002 Efficiency Cl.8.3 of IS 11346-2002)	-	10200	For complete testing
12.3(Hydrostatic Pressure Test)	-	10200	For complete testing
12.3.1(Hydrostatic Pressure Test)	-	10200	For complete testing
12.4(Pump tests)	-	10200	For complete testing
12.5(Self-Priming Test for Self-Priming Pumps)	-	10200	For complete testing
15.1(Guarantee of Workmanship and Material)	-	10200	For complete testing
13.1.2(No Load Test at Rated Voltage)	-	10200	For complete testing
13.1.2.1.1(Temperature Rise Test at Rated Voltage)	-	10200	For complete testing
13.1.2.1.2(Temperature Rise Test at Reduced Voltage)	-	10200	For complete testing
13.1.2(Break away torque Pull up torque)	-	10200	For complete testing
13.1.2(High Voltage test)	-	10200	For complete testing
13.1.2(Insulation Resistance)	-	10200	For complete testing
8(Direction of Rotation)	-	10200	For complete testing
7(Material of Constructional)	-	10200	For complete testing
11.1(General Requirements)	-	10200	For complete testing
13.1.2(Measurement of stator resistance)	-	10200	For complete testing
13.1(Single phase monoset pumps)	-	10200	For complete testing
13.1.2(Locked rotor test(cl.6.2(d) of IS 14582))	-	10200	For complete testing
13(Tests for Electrical Performance)	-	10200	For complete testing
7(Materials of Construction ( Casing/Chamber))	-	10200	For complete testing
7(Materials of Construction ( Impeller))	-	10200	For complete testing
7(Materials of Construction ( Shaft))	-	10200	For complete testing
8.1, 8.2(The direction of rotation of pumps)	-	10200	For complete testing
8.3(The direction of inlet and outlet flow passages)	-	10200	For complete testing
10.1(Design Features)	-	10200	For complete testing
10.1(a)(Design Features(Voltage Rangings))	-	10200	For complete testing
10.1(b)(Design Features(Frequency Rangings))	-	10200	For complete testing
10.1(c)(Design Features(Combination of Voltage and frequency variation))	-	10200	For complete testing
15.2(Guarantee of Performance)	-	10200	For complete testing
15(Guarntee on pump performance and tolerances)	-	10200	For complete testing
11(General Requirements)	-	10200	For complete testing
11.1(The pump shaft should be of adequate size to transmit the required power over the entire head range.)	-	10200	For complete testing
11.2(The pump casing should be of robust construction and shall be tested to withstand hydrostatic pressure as specified in 12.3.)	-	10200	For complete testing
11.3(The nominal size of suction and delivery pipe of the pump shall be as specified in IS 1239 (Part 1),IS 4984, IS 4985 and IS 12231)	-	10200	For complete testing
13.2(Three phase monoset pumps)	-	10200	For complete testing
13.2.2(Measurement of stator resistance test (cl.22.3.1(b) of IS 7538))	-	10200	For complete testing
13.2.2(No load test (cl.22.3.1cb) of IS 7538))	-	10200	For complete testing
13.2.2(Reduced voltage running test (cl.22.3.1(d) of IS 7538))	-	10200	For complete testing
13.2.2(Locked Rotor test (cl.22.3.1(e) of IS 7538))	-	10200	For complete testing
13.2.2(Insulation Resistance test (cl.22.3.1(m) of IS 7538))	-	10200	For complete testing
13.2.2(High Voltage test (cl.22.3.1(n) of IS 7538))	-	10200	For complete testing
15.2.1(Monoset pumps)	-	10200	For complete testing
15.2.1(a)(Discharge, total head, current and input power at the Guarnteed duty point)	-	10200	For complete testing
15.2.1(b)(Non overloading of the prime-mover I the declared operating head range)	-	10200	For complete testing
15.2.1(c)(Rated output of motor)	-	10200	For complete testing
15.2.1(d)(Full load speed of motor)	-	10200	For complete testing
15.2.2(Bare pumps)	-	10200	For complete testing
15.2.1(e)(Overall efficiency of pumpset)	-	10200	For complete testing
15.2.1(f)(Max.self.priming time)	-	10200	For complete testing
15.2.2(a)(Discharge, total head as per Guarnteed duty point at rated voltage and speed)	-	10200	For complete testing
15.2.2(b)(Non overloading of the prime-mover I the declared operating head range)	-	10200	For complete testing
15.2.2(c)(Non-over-rated prime mover recommended by the manufacturer)	-	10200	For complete testing
15.2.2(d)(Max.self.priming time)	-	10200	For complete testing
13.2.2.1.1(Temperature rise test at rated voltage)	-	10200	For complete testing
13.2.2.1.2(Temperature rise test at reduce voltage)	-	10200	For complete testing
13(Type of Enclosures)	-	10200	For complete testing

22 May, 2029

-
Included w.e.f 01.04.2026

BIS, Central Laboratory (CL)

None

IS 9550 (2024)

Bright Steel Bars â Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause. 6.0 (Sillicon)	-
Clause. 6.0 (Carbon)	-
Clause. 6.0 (Copper)	-
Clause. 6.0 (Manganese)	-
Clause. 6.0 (Molybdenum)	-
Clause. 6.0 (Chromium)	-
Clause. 6.0 (Phosphorus)	-
Clause. 6.0 (Nickel)	-
Clause. 7.0 (Tensile test)	-
Clause. 7.0 (Yeild stress)	-
Clause. 7.0 (Elongation)	-
Clause. 7.0 (Brinell Hardness)	-
Clause. 8.0 (Dimension)	-
Cl-8.1 (Dimensions)	-
clause. 9.0 (Surface condition)	-
clause. 9.0 (Decarburization)	-

-
-

BIS, Central Laboratory (CL)

None

IS 8088 (2025)

Tricycle Hand Propelled - Specification (Second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5, Table 1 (SHAPE AND DIMENSIONS (i) Overall length)	-
5, Table 1 (SHAPE AND DIMENSIONS (ii) Overall Width)	-
5, Table 1 (SHAPE AND DIMENSIONS (iii) Overall Height)	-
5, Table 1 (SHAPE AND DIMENSIONS (iv) Width of foot rest)	-
5, Table 1 (SHAPE AND DIMENSIONS (v) Length of Foot rest)	-
5, Table 1 (SHAPE AND DIMENSIONS (vi) Clearance of foot rest from gorund)	-
5, Table 1 (SHAPE AND DIMENSIONS (vii) Arm rest from seat)	-
5, Table 1 (SHAPE AND DIMENSIONS (viii) Seat length)	-
5, Table 1 (SHAPE AND DIMENSIONS (ix) Seat width)	-
5, Table 1 (SHAPE AND DIMENSIONS (x) back height from seat)	-
5, Table 1 (SHAPE AND DIMENSIONS (xi) Length of steering handle)	-
5, Table 1 (SHAPE AND DIMENSIONS (xii) Height of rear wheel supporting frame)	-
5, Table 2 (SHAPE AND DIMENSIONS (xiii) Leaverage od steeing handle)	-
6.1 (Frame)	-
6.2 (Steering Handle Bar)	-
6.3 (Tyres and Tubes)	-
6.4 (Wheel Rims)	-
6.5 (Mudguards)	-
6.6 (Brakes)	-
6.7 (Sprocket and Free Wheel)	-
6.8 (Front Wheel Hub)	-
6.9 (Rear Wheel Hub)	-
6.1 (Drive Chain)	-
6.11 (Chain Cover)	-
6.12 (Armrests)	-
6.13 (Tool Box)	-
6.14 (Lock)	-
6.16 (Lubrication)	-
6.17 (Keeping for crutches or walking sticks.)	-
6.18 (Accessories)	-
7.2 (FINISH)	-
8.1 (Load Test)	-
8.2 (Maneuverability)	-
8.3 (Static Load Test)	-
8.4.1 (Brake Test)	-
8.4.2 (Brake Test)	-
8.5 (Test for Finish)	-
6.15 (Hood)	-

-
-

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 734 (1975)

Specification for wrought aluminium and aluminium alloy forging stock and forgings (For General Engineering Purposes) (Second Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1 table 1(chemical composition)	-	2000	-
5.1 table 2(0.2% proof strength)	-	2000	-
5.1 table 2(Tensile strength)	-	1000	-
5.1 table 2(Elongation)	-	1000	-
Cl.5.1(Aluminium - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Copper - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Magnesium - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Silicon - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Iron - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Manganese - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Zinc - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Titanium And/or Other Grain Refining Elements - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Chromium - IS 504 and its parts or any other intrumental/chemical methods)	-	500	-
Cl.5.1(Remarks (Cu + Mg + Si + Fe + Mn + Zn) - IS 504 and its parts or any other intrumental/chemical methods)	-	3000	-
4.1(Freedom from defects)	-	250	-
9.1(Tensile test)	-	2000	-

-
included w.e.f 24.03.2026

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 17803 (2022)

POTABLE WATER BOTTLES (COPPER, STAINLESS STEEL, ALUMINIUM) SPECIFICATION

31500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Manufacture and Workmanship)	-	5000	For complete Qualitative tests
5.3(Manufacture and Workmanship)	-	5000	For complete Qualitative tests
7.1(Materials)	-	3500	For complete chemical tests
7.1.1(copper bottle - copper)	-	3500	For complete chemical tests
7.1.1(copper bottle – lead)	-	3500	For complete chemical tests
7.1.1(copper bottle – bismuth)	-	3500	For complete chemical tests
7.1.1(copper bottle – oxygen)	-	2500	additional testing charges if required
7.1.1(copper bottle – total impurities)	-	3500	For complete chemical tests
7.1.3.3(o-ring or washer - Defects)	-	5000	For complete Qualitative tests
7.1.4(Auxillary closure- Bisphenol A (BPA))	-	5000	For complete Qualitative tests
7.1.8(Anodic coating)	-	2500	-
7.1.8(Hard Anodized)	-	5000	For complete Dimensions and Qualitative tests
7.1.9(External coating– Limit of Lead)	-	2500	-
7.1.9(External coating– Limit of Cadmium)	-	3500	For complete chemical tests
7.2(Capacity)	-	5000	For complete Dimensions and Qualitative tests
7.3, 7.3.1, 7.3.2(Impact resistance Test/ Drop Impact Test/ Pendulum Impact test)	-	1000	-
7.4(Test for strength of shoulder strap)	-	1000	-
7.5(Test for cord)	-	1000	-
7.7(Leakage test)	-	1500	-
7.8(Staining test)	-	1000	-
7.9(Lever, device for operating or Regulating flow test)	-	5000	For complete qualitative tests
7.10(Stability test)	-	1000	-
7.11(Load test)	-	1500	-
7.12(Food safe test/Leaching test)	-	5000	For complete qualitative tests
7.12(Water potability)	-	5000	For complete qualitative tests
7.13(Turbidity)	-	1000	-
7.13(pH value)	-	1000	-
7.13(Taste threshold)	-	750	-
7.13(Colour, Hazen units)	-	750	-
7.13(Odour)	-	1000	-
7.13(Total dissolved solids)	-	1000	-
9.1(Marking)	-	5000	For complete qualitative tests
7.1.3(Overall Migration test (IS 9845 : 1998))	-	5000	For complete qualitative tests
Cl. 7.1.5(PERFORMANCE TEST (Lever device ))	-	1000	-
7.1.1.1(copper bottle – Thickness)	-	5000	For complete dimensions and qualitative tests
7.1.2.1(Stainless steel bottle (thickness))	-	5000	For complete dimensions and qualitative tests
7.1.2.1(Stainless steel bottle (material))	-	3500	For complete chemical tests
7.1.2 Note 2(Aluminium bottle (Material))	-	3500	For complete chemical tests
7.1.3.1(Stopper Material)	-	3500	For complete chemical tests
7.1.3.2(o-ring or washer Overall migration)	-	5000	For complete dimensions and qualitative tests.
7.1.4(Auxillary closure - Material)	-	3500	For complete chemical tests
7.1.9(External coating - Thickness test)	-	1000	-
7.1.9(External coating - Salt water corrosion test)	-	1000	-
7.1.9(External coating - Adhesion test)	-	1000	-
7.3.1.3 (Amendment 1)(Drop impact test - Free fall test)	-	1000	-
7.3.1.2 (Amendment 1)(Drop impact test - Vertical hang)	-	1000	-
7.3.1.1 (Amendment 1)(Drop impact test - Horizontal Hang)	-	1000	-
Cl 7.6(Test for cord chain)	-	5000	For complete dimensions and qualitative tests.
7.1.2 (Note 1), Annex B (Amendment 1)- Sensorial test(Annex B (Amendment 1)- Sensorial test)	-	0	-
15. 7.1.2 (Note 1), Annex A (Amendment 1)- Leaching of food grade stainless steel(Annex A (Amendment 1)- Leaching of food grade stainless steel)	-	0	-

-
included w.e.f 24.03.2026

Atckon Laboratories LLP, Bahadurgarh

8186436

IS/ISO 22702 (2018)

Utility lighters Safety specifications First Revision

ALL

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Flame generation)	-	1000	-
4.2(Flame heights)	-	1000	-
4.3(Flame- height adjustment)	-	1000	-
4.4("Resistance to Spitting or Sputtering and flaring")	-	1000	-
4.5(Flame extinction)	-	1000	-
4.6(Volumetric Displacement)	-	4500	-
5.2(Resistance to dropping)	-	1000	-
5.3(Resistance to elevated temperature)	-	1000	-
5.4(Burning behavior)	-	1000	-
5.5(Resistance to continuous burn)	-	1000	-
5.6(Resistance to cyclic burn)	-	1000	-
5.7(External Finish)	-	1000	-
5.8(Compatibility with fuel)	-	1000	-
5.9(Resistance to internal pressure)	-	1000	-
6(Refilling Test)	-	1000	-

19 Jun, 2028

-
Included w.e.f 24.03.2026

CIPET:CSTS Amritsar

9120034

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

17725 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	1050	-
Cl-4.2(Carbon content of finished PE lateral pipe)	-	925	-
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	500	-
Cl-6.0(Visual Appearance)	-	500	-
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	1000	-
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	3000	-
Cl-7.2(Reversion Test)	-	1200	Test Charges Rs.700 + Specimen Charges Rs. 500
Cl-7.3(Tensile Test)	-	1800	Test Charges Rs.1300 + Specimen Charges Rs. 500
Cl-7.3.1(Test Piece)	-	0	-
Cl-7.3.2(Procedure)	-	0	-
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1200	-
Cl-8.0(Supply of pipes)	-	500	-
Cl-9.0(Coiling)	-	0	-
Cl-10.0(Sampling and criteria for conformity)	-	0	-
3(Class of Pipe)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	0	-
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	0	-
6(Visual Appearance)	-	500	-
7.1 & Table 2(Hydraulic Characteristics)	-	1000	-
7.1 & Table 2(Hydraulic Characteristics)	-	3000	-
7.2(Reversion Test)	-	1200	Test Charges Rs.700 + Specimen Charges Rs. 500
7.3(Tensile Strength)	-	1800	Test Charges Rs.1300 + Specimen Charges Rs. 500
7.3(Elongation at Break)	-	0	-
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1200	-
4.2(a)(Carbon Black Content-IS 2530)	-	925	-
4.2(b)(Carbon Black Dispersion-IS 2530)	-	700	-
Cl-11(Marking)	-	0	-

06 Jan, 2027

-
Included w.e.f 24.03.2026

Standard Testing and Compliance Private Limited

6178726

IS 16805 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Secondary Lithium Cells and Batteries, for Use in Industrial Applications

450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General Safety Considerations)	-	5000	-
7.1(Charging Procedures For Test Purposes)	-	50000	-
7.2.1(External Short-Circuit Test)	-	30000	-
7.2.2(Impact Test)	-	30000	-
7.2.3(Drop Test)	-	30000	-
7.2.4(Thermal Abuse Test)	-	30000	-
7.2.5(Overcharge Test)	-	50000	-
7.2.6(Forced Discharge Test)	-	50000	-
8(Battery System Safety)	-	75000	-
9(Information For Safety)	-	40000	-
10(Marking and Designation)	-	10000	-
7.3.2(Internal short-circuit test)	-	50000	-
7.3.3(Propagation Test)	-	5000	-

10 Jul, 2027

-
-

Northern Centre For Research And Testing Pvt Ltd

8174806

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	12000	-
Clause 7.3, Annex G(Average Breaking Load)	-	12000	-
Clause 7.3, Annex G(Individual Breaking Load)	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	12000	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	12000	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	12000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	12000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	12000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	12000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	12000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	12000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	12000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	12000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	12000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	12000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	12000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	12000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	12000	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	12000	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	12000	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	12000	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	12000	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	12000	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	12000	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	12000	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	12000	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	12000	-
Clause 7.1.3 (Colour and Texture)	-	12000	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	12000	-
Clause 7.1.1 (General Quality)	-	12000	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	12000	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	12000	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	12000	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	12000	-
Clause 3.20(Spacer nibs)	-	12000	-

23 Nov, 2026

-
-

Northern Centre For Research And Testing Pvt Ltd

8174806

IS 383 (2016)

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1 (a)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	10000	-
5.4.1 (b)(mechanical properties- Aggregate Crushing Value/Ten Percent Fines Value)	-	10000	-
5.4.2(a)( Aggregates Impact Value)	-	10000	-
5.4.2(b)( Aggregates Impact Value)	-	10000	-
5.4.3(a)( Aggregate Abrasion Value)	-	10000	-
5.4.3(b)( Aggregate Abrasion Value)	-	10000	-
6.1-Table 7(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Nominal Size of aggregate)	-	10000	-
6.1-Table 7(ii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 63 mm sieve )	-	10000	-
6.1-Table 7(iii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 40 mm sieve )	-	10000	-
6.1-Table 7(iv)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 20 mm sieve )	-	10000	-
6.1-Table 7(v)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 16 mm sieve )	-	10000	-
6.1-Table 7(vi)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 12.5 mm sieve )	-	10000	-
6.1-Table 7(vii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 10 mm sieve )	-	10000	-
6.1-Table 7(viii)(SIZE AND GRADING OF AGGREGATES-Single-Sized Coarse Aggregates-Percentage Passing through 4.75 mm sieve )	-	10000	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Class)	-	10000	-
6.1.1-Table 8(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Size)	-	10000	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 160 mm Sieve)	-	10000	-
6.1.1-Table 8(i)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 80 mm Sieve)	-	10000	-
6.1.1-Table 8(ii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 40 mm Sieve)	-	10000	-
6.1.1-Table 8(iii)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 20 mm Sieve)	-	10000	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 4.75 mm Sieve)	-	10000	-
6.1.1-Table 8(iv)(SIZE AND GRADING OF AGGREGATES- Sizes of Coarse Aggregates for Mass Concrete- Percentage Passing through 2.36 mm Sieve)	-	10000	-
6.3-Table 9(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Grading Zone)	-	10000	-
6.3-Table 9(i)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 10mm Sieve )	-	10000	-
6.3-Table 9(ii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 4.75mm Sieve )	-	10000	-
6.3-Table 9(iii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 2.36mm Sieve )	-	10000	-
6.3-Table 9(iv)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 1.18mm Sieve )	-	10000	-
6.3-Table 9(v)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 600µm Sieve )	-	10000	-
6.3-Table 9(vi)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 300µm Sieve )	-	10000	-
6.3-Table 9(vii)(SIZE AND GRADING OF AGGREGATES-Fine Aggregate-Percentage Passing through 150µm Sieve )	-	10000	-
6.4-Table 10(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Nominal Size )	-	10000	-
6.4-Table 10(i)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 80mm Sieve )	-	10000	-
6.4-Table 10(ii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 40mm Sieve )	-	10000	-
6.4-Table 10(iii)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 20mm Sieve )	-	10000	-
6.4-Table 10(iv)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 4.75mm Sieve )	-	10000	-
6.4-Table 10(v)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 600µm Sieve )	-	10000	-
6.4-Table 10(vi)(SIZE AND GRADING OF AGGREGATES- All-in-Aggregate Grading-Percentage Passing through 150µm Sieve )	-	10000	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(fine aggregate))	-	10000	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (fine aggregate))	-	10000	-
5.7-Table-3-(III) IS:14959 (P-2)(Water soluble chloride content (fine aggregate))	-	10000	-
5.7-Table-3-(II) IS:4032(Total sulphate content (fine aggregate))	-	10000	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (fine aggregate))	-	10000	-
5.5-IS: 2386 (P-5)(Soundness (fine aggregate))	-	10000	-
5.2- TABLE-2- (Note-4) IS-2386 (P-2)(Organic impurities (fine aggregate))	-	10000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (fine aggregate))	-	10000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (fine aggregate))	-	10000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (fine aggregate ))	-	10000	-
5.2- TABLE-2- (i) IS-2386 (P-2)(Coal and Lignite (fine aggregate ))	-	10000	-
5.7-Table-3-(v) IS: 2386 (P-3)(specific gravity(coarse aggregate))	-	10000	-
5.7-Table-3-(Iv) IS: 2386 (P-3)(Water absorption (coarse aggregate))	-	10000	-
5.7-Table-3-(III) BN EN: 1744(Water soluble chloride content (coarse aggregate))	-	10000	-
5.7-Table-3-(II) BN EN: 1744(Total sulphate content (coarse aggregate))	-	10000	-
5.6-IS: 2386 (P-7)(Alkali Aggregate Reaction (coarse aggregate))	-	10000	-
5.5-IS: 2386 (P-5)(Soundness (coarse aggregate))	-	10000	-
5.3-IS: 2386 (P-1)(Combined elongation & flakiness index (coarse aggregate))	-	10000	-
5.2- TABLE-2- (vi) IS-2386 (P-2)(Total deleterious material (coarse aggregate))	-	10000	-
5.2- TABLE-2- (iv) IS-2386 (P-2)(Soft fragments (coarse aggregate))	-	10000	-
5.2- TABLE-2- (iii) IS-2386 (P-1)(Material fine aggregater than 75 micron (coarse aggregate))	-	10000	-
5.2- TABLE-2- (ii) IS-2386 (P-2)(Clay lumps (coarse aggregate ))	-	10000	-
5.5(Soundness By Magnesium Sulphate)	-	10000	-
7.2(Bulking Of Fine Aggregate)	-	10000	-
7.2(Bulk Density loose)	-	10000	-
7.2(Bulk Density Rodded)	-	10000	-
5.3(Elongation Index)	-	10000	-
5.3(Flakiness Index)	-	10000	-
Clause 5.7- Table 3 (i) (TotalAlkali content as Na2O equivalent )	-	10000	-
Clause 5.6(Dissolved Silica)	-	10000	-
Clause 5.6(Reduction in Alkalinity)	-	10000	-
Clause 5.1(General)	-	10000	-

23 Nov, 2026

-
-

Northern Centre For Research And Testing Pvt Ltd

8174806

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Physical requirments)	-	25000	-
8.2(Physical requirments-Dimensions-Length)	-	25000	-
8.2(Physical requirments-Dimensions-Height)	-	25000	-
8.2(Physical requirments-Dimensions-Width)	-	25000	-
8.3(Physical requirments- Block density)	-	25000	-
8.4(Physical requirments- Compressive strength)	-	25000	-
8.5(Thermal Conductivity)	-	25000	-
8.6( Drying Shrinkage )	-	25000	-
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	25000	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	25000	-
3.2 & 8.2(Indivisual Height)	-	25000	-
3.2 & 8.2(Indivisual Width)	-	25000	-
3.2 & 8.2(Indivisual Length)	-	25000	-
8.6, 9.4 & 11.5(Grade)	-	25000	-
3.4(Special Faces)	-	25000	-
3.3(Faces & Arises)	-	25000	-
3.1(Shape)	-	25000	-
8.1.1(General (Exposed wall construction))	-	25000	-
7(SURFACE TEXTURE AND FINISH)	-	25000	-
9.3(Thermal Conductivity)	-	25000	-

23 Nov, 2026

-
-

Northern Centre For Research And Testing Pvt Ltd

8174806

IS 13801 (2013)

Chequered Cement Concrete Tiles -

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	7000	-
Cl 12.1(Concavity & Convexity )	-	7000	-
Cl 12.2(Longest gap between the arms of the square and the edge of the title shall not exceed 2 percent of the length.)	-	7000	-
Cl 12.3(Shall not exceed 1 percent of the length of the edge.)	-	7000	-
Cl 12.4(Water absorption)	-	7000	-
Cl 12.5(Wet transverse strength)	-	7000	-
Cl 12.6(Resistance to wear)	-	7000	-
Cl 11(Finish)	-	7000	-

23 Nov, 2026

-
-

Northern Centre For Research And Testing Pvt Ltd

8174806

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	4000	-
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	4000	-
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	4000	-
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	4000	-
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	4000	-
5.4.2-IS: 3025(P-11)(Ph)	-	4000	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	4000	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	4000	-
16.1(Average Compressive Strength)	-	4000	-
16.1(Compressive Strength of Individual Samples )	-	4000	-
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	750	-
5.4-Table-1 (iv)-IS: 3025(P-32)(Chloride)	-	1000	-
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	750	-
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	750	-
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	750	-
5.4.2-IS: 3025(P-11)(Ph)	-	750	-
5.4-(b)-IS: 3025 (P-23)(Volume of 0.02 N H2SO4 to neutralized 100 ml of water using mixed indicator)	-	750	-
5.4-(a)-IS: 3025 (P-22)(Volume of 0.02 N NaOH to neutralized 100 ml of water using phenolphthalein indicator)	-	750	-
16.1(Average Compressive Strength)	-	1500	-
16.1(Compressive Strength of Individual Samples )	-	500	-

23 Nov, 2026

-
-

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING & TECHNOLOGY - CIPET, HALDIA

5116334

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

All

30330 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	1000	Discount of 25 % is applicable on total test charges only for BIS.
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	700	Discount of 25 % is applicable on total test charges only for BIS.
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	2200	Test Charges= 1100 + 1100 (Before and after UV Exposure) Discount of 25 % is applicable on total test charges only for BIS.
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	1400	Discount of 25 % is applicable on total test charges only for BIS.
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	0	-
3.2(Unlaminated Fabric Mass )	-	500	Discount of 25 % is applicable on total test charges only for BIS.
3.3.1(Bottom seam (IS 10789))	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.2 and Table 1 ii(Dimensions )	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.2 and Table 1 iii(Ends per dm )	-	500	Discount of 25 % is applicable on total test charges only for BIS.
5.2 and Table 1 iv(Picks per dm )	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.2 and Table 1 v(Mass of sack )	-	500	Discount of 25 % is applicable on total test charges only for BIS.
4.2 and Table 1 vi(Average breaking strength of fabric )	-	2700	Test Charges= 2200 & Secimen Charge 500 Discount of 25 % is applicable on total test charges only for BIS.
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	1600	Test Charges= 1100 & Secimen Charge 500 Discount of 25 % is applicable on total test charges only for BIS.
4.2 and Table 1 viii(Elongation at break of fabric )	-	0	Discount of 25 % is applicable on total test charges only for BIS.
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12880	(Test charges 2200 + specimen charges 500+ 10180) Discount of 25 % is applicable on total test charges only for BIS.
4.2 and Table 1 x(Ash content )	-	2400	Test Charges= 1200 + 1200 (Tape and Sack) Discount of 25 % is applicable on total test charges only for BIS.
3.2(Tapes – Width and Thickness ( IS 6192/IS 11197))	-	0	-
3.2(Tapes – Linear Density (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Tenacity (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Elongation at point of rupture (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Heat Shrinkage (HDPE) (Cl. 3.2 and IS 6192))	-	0	-
3.2(Tapes – Colour Fastness for pigmented tapes (IS 6192/IS 11197))	-	0	-
3.2(Tapes – Dimensional stability (PP) (IS 11197))	-	0	-
3.2(Unlaminated Fabric Mass )	-	0	-
3.3.1(Bottom seam (IS 10789))	-	0	-
4.1 and 3.4(Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-	0	-
4.2 and Table 1 ii(Dimensions )	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	0	-
5.2 and Table 1 iv(Picks per dm )	-	0	-
4.2 and Table 1 v(Mass of sack )	-	0	-
4.2 and Table 1 vi(Average breaking strength of fabric )	-	0	-
4.2 and Table 1 vi(Breaking strength of bottom seam )	-	0	-
4.2 and Table 1 viii(Elongation at break of fabric )	-	0	-
4.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0	-
4.2 and Table 1 x(Ash content )	-	0	-
3.1(Material Identification)	-	4000	Test Charges= 2000+2000 (Raw Material + Fabric) Discount of 25 % is applicable on total test charges only for BIS.
3.1(Overall Migration)	-	2200	Test Charges= 1700 & Secimen Charge 500 Discount of 25 % is applicable on total test charges only for BIS.
3.2(Density)	-	700	Discount of 25 % is applicable on total test charges only for BIS.
3.2(MFI)	-	1100	Discount of 25 % is applicable on total test charges only for BIS.
Cl 3.2 (Mesh size)(Mesh size)	-	0	-
Cl 3.2 (Weight in g/m2) (Amendment 3)(Weight in g/m2)	-	0	-
3.3.2(Mouth)	-	0	-

-
-

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	100	10% for each extra core
11.2(Legibility)	-	100	10% for each extra core
11.1(Durability)	-	100	10% for each extra core
11(Identification)	-	100	10% for each extra core
10.4(Flammability test- Unaffected portion)	-	250	10% for each extra core
10.4(Flammability test-Burning after flame removal)	-	250	10% for each extra core
table 1 e) 3) (IR constant- max. Temp)	-	500	10% for each extra core
table 1 e) 3) (IR constant- Room temp )	-	500	10% for each extra core
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	500	10% for each extra core
table 1 e) 3) (Volume Resistivity - Room temp )	-	500	10% for each extra core
10.2(HV (room temperature))	-	1000	10% for each extra core
10.1(HV (water immersion))	-	1500	10% for each extra core
10.8(Smoke density rating)	-	3500	10% for each extra core
10.6(Halogen evolution)	-	3500	10% for each extra core
10.7(Temperature index)	-	3500	10% for each extra core
10.5(Oxygen index)	-	3500	10% for each extra core
Table 1 iii) d) 9)(Cold impact for sheath)	-	0	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	0	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	0	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	0	-
Table 1(Category Code)	-	100	10% for each extra core
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	500	10% for each extra core
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	500	10% for each extra core
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	500	10% for each extra core
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	500	10% for each extra core
Table 1 iii) d) 5)(Heat shock-Sheath )	-	500	10% for each extra core
Table 1 iii) c) 5)(Heat shock-Insulation )	-	500	10% for each extra core
Table 1 iii) d) 4)(Cracks Observed)	-	250	10% for each extra core
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	250	10% for each extra core
Table 1 iii) c) 4)(Cracks Observed)	-	250	10% for each extra core
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	250	10% for each extra core
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	500	10% for each extra core
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	500	10% for each extra core
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	250	10% for each extra core
Table 1 iii) d) 3)(Sheath- TS variation)	-	250	10% for each extra core
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	250	10% for each extra core
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	250	10% for each extra core
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	350	10% for each extra core
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	350	10% for each extra core
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	350	10% for each extra core
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	50	10% for each extra core
8.3(Thickness of Sheath)	-	100	10% for each extra core
9.1(Ovality)	-	100	10% for each extra core
9(Overall dimensions)	-	100	10% for each extra core
10.11(Per sulphate test (for tinned Cu cable only))	-	100	10% for each extra core
4.2(Conductor resistance test)	-	1500	10% for each extra core
4.1(Wrapping test (for Al))	-	500	-
4.1(Tensile test (for Al)- After Stranding)	-	1000	-
4.1(Tensile test (for Al)-Before Stranding)	-	300	-
4.1(Annealing test (for copper))	-	1000	-
Cl. 8.2(Application of Sheath)	-	100	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	2000	-
10.1(High Voltage Test (Water Immersion Test))	-	1000	10% for each extra core
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	250	10% for each extra core
Table 1 iii) c) 3)(Elongation variation)	-	250	10% for each extra core
Table 1 iii) c) 3)(TS variation)	-	250	10% for each extra core
Table 1 iii) c) 3)(Elongation (After ageing))	-	250	10% for each extra core
Table 1 iii) c) 1)(Elongation (Without ageing))	-	350	10% for each extra core
5.2(Application )	-	100	-
5.3(Thickness of Insulation)	-	100	10% for each extra core
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	50	-
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	50	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	50	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	50	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	50	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	50	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	50	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	50	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	50	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	100	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	100	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	100	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	100	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	100	-
12(CONSTRUCTION Core Identification)	-	100	-
8.1(Sheath Material )	-	100	-
7(Binder Tape)	-	100	-
6.2(Filler)	-	100	-
6.1(Filler)	-	100	-
5.1(Insulation)	-	100	-
4.4(Joints in Conductor)	-	100	-
4.4(Joints in Conductor)	-	100	-
4.1(Conductor - Material)	-	100	-
4.1(Conductor - Material)	-	100	-
10.11(Persulphate Test )	-	500	-
12.0(Core identification)	-	100	-
4, IS 8130(Construction of conductor)	-	100	-
Table 2, IS 8130(No fo wire in a conductor)	-	100	-
8.3(Minimum thickness of Sheath)	-	100	-
8.3(Avarage thickness of Sheath)	-	100	-
5.3(Minimum thickness of insulation)	-	100	10% for each extra core
5.3(Avarage thickness of insulation)	-	100	10% for each extra core
Table 4(Copper purity test)	-	500	-
10.3(Spark test)	-	0	-
table 1, 4.2(insulation resistance test)	-	100	10% for each extra core
5.4(Mechanical properties before and after ageing)	-	100	10% for each extra core
10.3(Spark Test)	-	0	-
4.1(Material)	-	100	-
4.2(Electrical Resistance)	-	1500	10% for each extra core
5(INSULATION)	-	100	-
6(FILLER)	-	100	-
7(BINDER TAPE)	-	100	-
8(SHEATH)	-	100	-
9(OVERALL DIMENSIONS)	-	100	-
10.2(High Voltage Test (at Room Temperature))	-	500	10% for each extra core
10.3(Spark Test)	-	0	-
10.4(Flammability Test)	-	200	-
10.5(Oxygen Index Test)	-	3500	-
10.6(Test for Halogen Acid Gas Evolution)	-	3500	-
10.7(Test for Temperature Index)	-	3500	-
10.8(Smoke Density Rating)	-	3500	-
10.11(Persulphate Test)	-	500	-
11(IDENTIFICATION)	-	100	-
12(CORE IDENTIFICATION)	-	100	-
13(CABLE CODE)	-	100	-
15(PACKING AND MARKING)	-	50	-
16.1(Construction)	-	100	-
16.2(Tests)	-	0	-
17(SINGLE CORE NON-SHEATHED CABLES WITH FLEXIBLE CONDUCTOR FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	100	-
18(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-	100	-
19(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES/CORDS WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	100	-
20(MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	100	-
21(ARALLEL TWIN AND TWISTED TWIN FLEXIBLE PVC INSULATED UNSHEATHED CORDS (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	100	-
22(TWO AND THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED (CLASS 2 OR 5) FOR GENERAL PURPOSE( FOR MAXIMUM CONDUCTOR TEMPERA TURE 70°C OR 85°C))	-	100	-
(4.3 of IS 8130:2013)(Form of Conductor)	-	100	-
( 4.4.1 of IS 8130:2013)(Joints in Conductor)	-	100	-
(4.4.2 of IS 8130:2013)(Joints in Conductor Solid Conductors (Aluminium Conductors only))	-	100	-
(Cl.6.1.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	100	-
(Cl.6.1.2 of IS 8130:2013)(Solid Conductor (Class 1))	-	100	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	100	-
(6.2.1 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	100	-
(6.2.2 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	100	-
(6.2.3 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	100	-
(6.3.1 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	100	-
(6.3.2 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	100	-
(6.3.3 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	100	-
( 6.4.1 of IS 8130:2013)(Flexible Conductors (Class 5))	-	100	-
(6.4.2 of IS 8130:2013)(Flexible Conductors (Class 5))	-	100	-
( 6.4.3 of IS 8130:2013)(Flexible Conductors (Class 5))	-	100	-
Cl.19.1.4(Assembly of Cores)	-	100	-
10.1(HV (water immersion))	-	1500	10% for each extra core
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	2000	-

08 Apr, 2027

-
-

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	0	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	0	-
5.1(Insulation)	-	0	-
6.1(Flexibility class)	-	0	-
6.2(Compactness)	-	0	-
6.2(No of strands)	-	0	-
6.2(Surface)	-	0	-
6.3(Protective barrier)	-	0	-
6.4(size of street lighting conductor)	-	0	-
6.5(Size of messenger conductor )	-	0	-
6.6(Joints in messenger conductor )	-	0	-
6.6(Direction of outer layer)	-	0	-
7.1(Insulation)	-	0	-
7.2( Thickness of insulation)	-	250	10% EXTRA FOR EACH CORE
7.3(Tolerance on thickness of insulation )	-	250	10% EXTRA FOR EACH CORE
7.4(Aplication of the insulation )	-	0	-
7.5(Colour of the insulation )	-	0	-
8.1(Core identification)	-	0	-
8.2(Core identification)	-	0	-
8.3(Identification by other means)	-	0	-
9.1(Assembly (Laying up))	-	0	-
9.2(Assembly (Laying up))	-	0	-
9.3(Direction of lay)	-	0	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	0	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	1000	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	1000	10% EXTRA FOR EACH CORE
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	250	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	250	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	250	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	250	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	250	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	250	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	250	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	250	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	250	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	1500	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	1500	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	1000	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	250	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	250	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	0	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	0	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	1000	10% EXTRA FOR EACH CORE
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	1000	10% EXTRA FOR EACH CORE
10.1 g)(High voltage test - IS10810:Part 45)	-	1000	10% EXTRA FOR EACH CORE
6.1(Construction of phase conductor)	-	0	-
6.1(Number of wires (phase conductor))	-	0	-
6.1(Construction of Street Lighting conductor)	-	0	-
6.1(Number of wires (Street Lighting conductor))	-	0	-
12.1(Manufacturer's Identification)	-	0	-
12.2(Cable Identification)	-	0	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	0	-
11.4(Bending Test on the Completed Cable ( Optional))	-	0	-

08 Apr, 2027

-
-

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	0	-
4(INSULATION : MATERIALS)	-	0	-
5.1(FILLER AND INNER SHEATH)	-	0	-
5.2(FILLER AND INNER SHEATH)	-	0	-
6(ARMOURING)	-	0	-
7(OUTER SHEATH)	-	0	-
8.1(CONDUCTOR: CONSTRUCTION)	-	0	-
8.2(PROTECTIVE BARRIER)	-	0	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	0	-
9.1(Insulation Applied by extrusicn)	-	0	-
9.2(Thickness of Insulation - Average)	-	1000	10% extra for each core
9.3(Thickness of Insulation - Minimum)	-	500	10% extra for each core
9.4(Application of Insulation)	-	0	-
10.1(Core Identification)	-	0	-
10.2(Core Identification- Neutral)	-	0	-
10.3(Core Identification by number )	-	0	-
10.4(Core Identification by number - Neutral )	-	0	-
11(LAVING UP OF CORES)	-	0	-
12.1 & 12.2(Inner sheath : Application)	-	0	-
12.3(Thickness of Inner Sheath)	-	1000	-
13.1(Armouring: Application)	-	0	-
13.1.2(Armouring: Coverage )	-	0	-
13.1.3(Armouring: Direction of Lay )	-	0	-
13.4(Armour: Joint)	-	0	-
13.5(Armouring : Resistance Test)	-	2000	-
13.6 a)(ARMOURING: Tensile Strength)	-	1000	-
13.6 b)(ARMOURING: Elongation )	-	1000	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	2000	-
13.6 g)(ARMOURING: Resistivity)	-	2000	-
14.1(Outer Sheath : Application)	-	0	-
14.2(Colour of outer sheath)	-	0	-
14.3(Thickness of outer sheath - AVERAGE)	-	1000	-
14.3(Thickness of outer sheath - minimum)	-	500	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	1000	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	1000	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	1000	-
15.1 a) iii)(Wrapping test (for aluminium))	-	500	-
15.1 a) iv)(Resistance test - Main conductor)	-	2000	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	0	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	750	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	750	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1000	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1000	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	500	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	500	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	1000	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	1000	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	500	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	500	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	500	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	500	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	500	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	500	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	1000	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	500	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 e) v) (Sheath : Hot deformation)	-	500	-
15.1 e) vi) (Sheath : Heat shock test)	-	500	-
15.1 e) vii) (Sheath : Thermalstability)	-	1000	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	2000	10% extra for each core
16.2(HIGH VOLTAGE TEST )	-	2000	10% extra for each core
16.3(FLAMMABILITY TEST : Period of Burning )	-	250	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	250	-
16.9(Oxygen Index Test)	-	5000	-
16.1(Flame Retardance Test on Single Cables)	-	5000	-
16.11(Flame Retardance Test on Bunched Cables)	-	5000	-
16.13(Test for Halogen Acid Gas Evolution)	-	5000	-
16.14(Temperature Index)	-	5000	-
17.1(Manufacturer'. identification)	-	0	-
17.2(cable Indentification )	-	0	-
17.3(cable Code )	-	0	-
15.4 (a)(Cold bend)	-	500	-
15.4 (b)(Cold impact)	-	500	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	500	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	500	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	500	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	500	-
Table 4(Copper purity test)	-	500	-
Cl No. 16.15(Smoke density test)	-	5000	-
Table 2(Cold Impact test for Outer sheath)	-	500	-
Table 2(Cold bend test for Outer sheath)	-	500	-
Cl 16(Halogen Acid Gas Test)	-	5000	-
Cl 16(Halogen Acid Gas Test)	-	5000	-
Cl 16(Halogen Acid Gas Test)	-	5000	-
Cl.8(Conductor)	-	0	-
Cl.8(Conductor)	-	0	-
Cl.8(Conductor)	-	0	-
Cl.15.4(Cold Bend Test (for outer sheath))	-	500	-
Cl.15.4(Cold Impact Test (For outer sheath))	-	500	-
Cl.13.5.1 and Table 7(Resistance Test for Armouring (other than mining Cables))	-	2000	-
13.2(Type of armour )	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	500	-
13.3(Armouring : Dimensions -Formed wire )	-	500	-

08 Apr, 2027

-
-

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 15549 (2005)

Stationary valve regulated lead acid batteries - Specification

120000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.1(Test for C 10 Capacity)	-	20000	----
12.2(Test for C 1 Capacity)	-	20000	----
12.4(Ampere Hour Efficiency)	-	10000	---
12.5(Watt Hour Efficiency)	-	10000	----
12.6(Test for Retention of Charge)	-	10000	----
12.9 & Annex C(Test for Oxygen Recombination Efficiency)	-	10000	----
12.1(Endurance Life Cycle Test)	-	40000	-----

08 Apr, 2027

-
-

National Test House (NTH), Alipore, Kolkata-700027

5123904

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13.1(Marking (Rating Plates))	-	1000	-
13.2(Terminal Marking Plate)	-	0	-
13.3(Marking )	-	1000	-
13.4(Marking)	-	1000	-
13.4.1(Marking)	-	1000	-
21.2 a)(Measurement of winding resistance )	-	1000	-
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	1500	-
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	6000	-
21.2 d)(Measurement of no-load loss and current)	-	5500	-
21.2 e)(Measurement of insulation resistance)	-	1000	-
21.2 f)(Induced over-voltage withstand test)	-	2500	-
21.2 g)( Separate-source voltage withstand test)	-	2500	-
21.5.3.3(Oil leakage test)	-	7000	-
21.3(b)(Temperature-rise test)	-	30000	-
21.4 a)( Determination of sound levels)	-	6000	-
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	10000	-
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	5000	-
21.5.2.1(Type test : For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	10000	-
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	5000	-
21.5.2.3( Oil leakage test (routine test))	-	7000	-
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	5000	-
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	5000	-
21.4 c(No load current at 112.5 percent voltage.)	-	2000	-
21.4 d(Paint adhesion tests)	-	5000	-
6.9, 7.9, 8.9(Permissible Flux Density and Over Fluxing)	-	10000	-
11(Minimum clearance in Air)	-	1000	-
21.5.1.3(Oil leakage test upto 200 KVA)	-	7000	-
6.8 (50%)(Total losses at 50 % load (Watts))	-	0	-
7.8 (50%)(Total losses at 50 % load (Watts))	-	0	-
8.8 (50%)(Total losses at 50 % load (Watts))	-	0	-
6.8 (100%)(Total losses at 100 % load (Watts))	-	0	-
7.8 (100%)(Total losses at 100 % load (Watts))	-	0	-
8.8 (100%)(Total losses at 100 % load (Watts))	-	0	-
21.5.3.3(Oil leakage test (routine test))	-	7000	-
6.9(Permissible Flux Density and Over Fluxing )	-	10000	-
6.1(Limits of Temperature-rise)	-	30000	-
11(Minimum Clearnaces air )	-	1000	-

08 Apr, 2027

-
-

Shri Krishna Test House

8122336

IS 2347 (2023)

DOMESTIC PRESSURE COOKER ï¿½ SPECIFICATION

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Gross capacity)	-	1500	-
4.2(Body Capacity)	-	1500	-
5.1(Body, Lid, Containers and Grid)	-	1500	-
5.1.2(Body and Lid )	-	1500	-
5.1.3(Stainless steel pressure cooker)	-	5000	-
5.1.4(Aluminium cooker )	-	5000	-
5.3(Gasket)	-	7000	-
5.4(Handles and Knobs)	-	15000	-
5.5(Pressure Regulating Device )	-	2000	-
5.6(Vent Seal Pin for Pressure Regulating Device )	-	2000	-
5.7(Vent Pipe )	-	2000	-
5.8(Vent Pipe Nut )	-	2000	-
5.9(Spring )	-	200	-
5.1(Material of Rim )	-	2000	-
5.11(Visual Pressure Indicator)	-	3000	-
5.12(Gasket Release System)	-	3000	-
6(Construction)	-	5000	-
7(Workmanship and Finish )	-	5000	-
8.1(Air Pressure Test )	-	5000	-
8.2(Proof Pressure Test )	-	5000	-
8.3(Operating Test for Pressure Regulating Device )	-	5000	-
8.4(Test for Safety Relief Device )	-	5000	-
8.5(Bursting Pressure Test )	-	5000	-
8.6(Test for Removal of Lid under Pressure )	-	5000	-
8.7(Test for Spring Loaded Mechanism )	-	5000	-
8.8(Composite Cooker Base )	-	5000	-
8.9(Aluminium induction compatible Base )	-	5000	-
8.1(Handles of cooker )	-	5000	-
8.11(External Coating)	-	5000	-
8.12(Internal Coating )	-	5000	-
8.13(Integral electrical heating)	-	7500	-
8.14(Ply construction cooker Body )	-	7500	-
8.15.1(Fragmentation Test )	-	1000	-
8.15.2(Ball Drop Test )	-	1000	-
8.15.3(Thermal Shock Test )	-	2000	-
8.15.4(Free Fall Test)	-	2000	-
8.17(Test for Effectiveness for Induction Bottom)	-	2500	-
11(Marking )	-	100	-
12(Packing )	-	100	-
5.2(Safety Relief Device)	-	2500	-

05 Oct, 2028

-
-

Alpha Test House Private Limited, Delhi

8131026

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

90000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General)	-	1000	Nil
5.2(Insulation and Wiring)	-	3000	Nil
6(Type Test and Sample Size)	-	4000	Nil
7.1(Charging procedure for test purposes)	-	7000	Nil
7.2(Intended Use)	-	8000	Nil
7.3(Reasonably foreseeable misuse)	-	11000	Nil
8.2(Small Cell and battery safety information)	-	2000	Nil
4(Parameter Measurement Tolerances)	-	2000	Nil
5(General Safety Considerations)	-	2000	Nil
5.3(Venting)	-	2000	Nil
5.4(Temperature, Voltage and Current Management)	-	2000	Nil
5.5(Terminal Contacts)	-	2000	Nil
5.6(Assembly of Cells into batteries)	-	2000	Nil
5.7(Quality Plan)	-	2000	Nil
5.8(Battery Safety Components)	-	2000	Nil
7(Specific requirements and tests)	-	2000	Nil
8(Information for safety)	-	2000	Nil
8.1(General)	-	2000	Nil
9(Marking)	-	2000	Nil
9.1(Cell Marking)	-	2000	Nil
9.2(Battery Marking)	-	2000	Nil
9.3(Caution for ingestion of small cells and batteries)	-	2000	Nil
9.4(Other information)	-	2000	Nil
10(Packaging)	-	2000	Nil
clause 7.3.1 of IS 16047: Part 3(Discharge performance at 20 °C (rated capacity))	-	20000	Nil
clause 7.3.1 of IS 16047: Part 3(Discharge performance at 20 °C (rated capacity))	-	20000	-

-
Exclusion : Clause 7.3.1 of IS 16047: Part 3

LPG Equipment Research Centre (LERC), Bengaluru

6141034

IS 14643 (1999)

Unsintered polytetrafluoroethylene (Ptfe)Tape for thread sealing applications - Specification

10000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1.1(Manufacture)	-	2000.00	-
3.2.1(Appearance)	-	500.00	-
3.3.1(Length)	-	300.00	-
3.3.2(Width)	-	300.00	-
3.3.3(Thickness)	-	300.00	-
3.4(Thread Wrapping Properties)	-	500.00	-
3.5(Sealing)	-	4600.00	-
5(Packing and Marking)	-	1000.00	-
3.2.2(Finish)	-	500	-
3.1.1(Manufacture)	-	-	-
3.2.1(Appearance)	-	-	-
3.3.1(Length)	-	-	-
3.3.2(Width)	-	-	-
3.3.3(Thickness)	-	-	-
3.4(Thread Wrapping Properties)	-	-	-
3.5(Sealing)	-	-	-
5(Packing and Marking)	-	-	-
3.2.2(Finish)	-	-	-

-
Included w.e.f 01.04.2026

BIS, Eastern Regional Laboratory (ERL)

None

IS 3196 : Part 1 (2013)

Welded low carbon steel cylinders exceeding 5 litres water capacity for low pressure liquefiable gases: Part 1 cylinders for liquefied petroleum gases (Lpg) - Specification (Sixth Revision)

For all sizes except for the test mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9 (Valve Protection)	-
10 (Foot Ring)	-
14 (Bung)	-
14 (Water Capacity)	-
15 (Hydrostatic Test)	-
16 (Pneumatic Leakage Test)	-
17 (Burst Test under Hydraulic Pressure)	-
18 (Parent Metal Longitudinal Tensile Strength)	-
18 (Parent Metal Circumferential Tensile Strength)	-
18 (Weld Metal Tensile Strength)	-
18 (Bend Test across weld)	-
18 (Root Bend Test)	-
18 (Face Bend Test)	-
18 (Minimum Thickness Test)	-
21 (Colour Identification)	-
23.2 (Protective Coatings)	-
9.0 (Valve Connection)	-
10.0 (Handle)	-

-
Mech: Test facility not available for Fatigue test and Radiographic examination

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 5204 (1969)

Specifiction for research microscope

26800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.3(Dimension)	-	8000	-
Cl. No.4(General requirenment)	-	8000	-
Cl. No.5(Functional requirement)	-	5000	-
Cl. No.6.1(Mechanical test)	-	6000	-
Cl. No.6.2(Optical test)	-	8500	-
Cl. No.7(Marking)	-	400	-
Cl. No.3(Dimension)	-	0	-
Cl. No.4(General requirenment)	-	0	-
Cl. No.5(Functional requirement)	-	0	-
Cl. No.6.1(Mechanical test)	-	0	-
Cl. No.6.2(Optical test)	-	0	-
Cl. No.7(Marking)	-	0	-

-
included w.e.f 24.03.2026

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

15900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(TYPES)	-	500	-
4.1(Raw Material)	-	9500	ALL TEST INCLUDED
4.2(Tapes – Width IS 6192 and IS 11197)	-	500	-
4.2(Tapes – Linear Density )	-	500	-
4.2(Construction)	-	500	-
4.3(Sacks)	-	900	-
4.3.1(Bottom Seam)	-	0	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	1000	-
4.4(Liner IS 10146 or IS 10910.)	-	500	-
4.4(Mass of the loose liner )	-	0	-
4.4(Width of the loose liner)	-	0	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	500	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	500	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	500	-
5.2 and Table 1 iii(Ends per dm )	-	500	-
5.2 and Table 1 iv(Picks per dm )	-	500	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	500	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	500	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	500	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	2000	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1500	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	1500	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	2000	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	4000	-
5.2 and Table 1 x(Ash content )	-	1500	-
3(TYPES)	-	0	-
4.1(Raw Material)	-	9500	ALL TEST INCLUDED
4.2(Tapes – Width IS 6192 and IS 11197)	-	0	-
4.2(Tapes – Linear Density )	-	0	-
4.2(Construction)	-	0	-
4.3(Sacks)	-	0	-
4.3.1(Bottom Seam)	-	0	-
4.3.1(The two rows of stitches shall be separated from each other)	-	0	-
4.3.1( The outer stitch)	-	0	-
4.3.1( The stitching shall be done with double fold over seam to a depth )	-	0	-
4.3.1(Stitches pass through a minimum of six layers of the fabric. )	-	0	-
4.3.1(stitches/dm)	-	0	-
4.3.2(Mouth)	-	0	-
4.4(Liner IS 10146 or IS 10910.)	-	0	-
4.4(Mass of the loose liner )	-	0	-
4.4(Width of the loose liner)	-	0	-
4.4(Length of the line)	-	0	-
4.4(Bottom seam of the loose liner)	-	0	-
4.4.1(Liner)	-	0	-
4.5 and Table 1 i(Capacity)	-	0	-
5.2 and Table 1 ii a(Dimensions Inside Length)	-	0	-
5.2 and Table 1 ii b(Dimensions Inside Width)	-	0	-
5.2 and Table 1 iii(Ends per dm )	-	0	-
5.2 and Table 1 iv(Picks per dm )	-	0.02	-
5.1 and Table 1 v a(Mass of unlaminated sack IS 1964)	-	0	-
5.1 and Table 1 v b(Mass of unlaminated sack with liner )	-	0	-
5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-	0	-
5.2 and Table 1 vi(Breaking strength of bottom seam IS 9030 )	-	1500	-
5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-	2000	-
5.2 and Table 1 viii b(Elongation at break of fabric Widthwise IS 1969 (Part 1))	-	2000	-
5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	4000	-
5.2 and Table 1 x(Ash content )	-	0	-
4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2)	-	0	-
5.3(UV Resistance)	-	2000.01	-
Cl-4.4 (Amendment-3)(Thickness of liner)	-	0.02	-

-
included w.e.f 24.03.2026

LPG Equipment Research Centre (LERC), Bengaluru

6141034

IS 742 (1981)

Specification for zinc bash alloy dih castings (Second Revision)

2850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 3.1(Manufacture)	-	0	-
Clause 5(DIMENSIONS)	-	100	-
Clause 4.1("CHEMICAL COMPOSITION")	-	100	-
Clause 6("Freedom from defects")	-	100	-
Clause 7("CONDITION OF SUPPLY")	-	100	-
Clause 10(WEIGHT TEST)	-	100	-
Clause 11(STEAM TEST)	-	250	-
Clause 12(Marking)	-	100	-
Cl 4.1(Aluminium)	-	200	-
Cl 4.1(Copper)	-	200	-
Cl 4.1(Magnesium)	-	200	-
Cl 4.1(Iron)	-	200	-
Cl 4.1(Lead)	-	200	-
Cl 4.1(Cadmium)	-	200	-
Cl 4.1(Tin)	-	200	-
Cl 4.1(Thalium+ Indium)	-	200	-
Cl 4.1(Nickel)	-	200	-
Cl 4.1(Zinc)	-	200	-

-
1. Clause 2 (Supply of material) Supply of Material Applicable to manufacturer.

JBS TESTING SOLUTIONS (Unit-2) (24), Jalandhar

9172306

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13(Cable code)	-	500	-
11.2(Legibility)	-	500	-
11.1(Durability)	-	500	-
11(Identification)	-	500	-
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	3500	-
10.4(Flammability test- Unaffected portion)	-	750	-
10.4(Flammability test-Burning after flame removal)	-	750	-
table 1 e) 3) (IR constant- max. Temp)	-	2000	-
table 1 e) 3) (IR constant- Room temp )	-	2000	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	2000	-
table 1 e) 3) (Volume Resistivity - Room temp )	-	2000	-
10.2(HV (room temperature))	-	2000	-
10.1(HV (water immersion))	-	2000	-
10.1(HV (water immersion))	-	3500	-
10.8(Smoke density rating)	-	3500	-
10.6(Halogen evolution)	-	2500	-
10.7(Temperature index)	-	2500	-
10.5(Oxygen index)	-	2500	-
Table 1 iii) d) 9)(Cold impact for sheath)	-	2500	-
Table 1 iii) d) 8)(Cold bend for sheath)	-	1850	-
Table 1 iii) c) 9)(Cold impact for insulation)	-	1850	-
Table 1 iii) c) 8)(Cold bend for insulation)	-	1850	-
Table 1(Category Code)	-	500	-
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	750	-
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	750	-
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	1000	-
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	1000	-
Table 1 iii) d) 5)(Heat shock-Sheath )	-	500	-
Table 1 iii) c) 5)(Heat shock-Insulation )	-	500	-
Table 1 iii) d) 4)(Cracks Observed)	-	500	-
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	500	-
Table 1 iii) c) 4)(Cracks Observed)	-	500	-
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	500	-
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	1500	-
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	1500	-
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	500	-
Table 1 iii) d) 3)(Sheath- TS variation)	-	500	-
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	500	-
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	500	-
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	500	-
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	500	-
Table 1 iii) c) 3)(Elongation variation)	-	1000	-
Table 1 iii) c) 3)(TS variation)	-	1000	-
Table 1 iii) c) 3)(Elongation (After ageing))	-	1000	-
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	1000	-
Table 1 iii) c) 1)(Elongation (Without ageing))	-	500	-
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	500	-
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	250	-
8.3(Thickness of Sheath)	-	250	-
5.2(Application )	-	250	-
5.3(Thickness of Insulation)	-	250	-
9.1(Ovality)	-	250	-
9(Overall dimensions)	-	250	-
10.11(Per sulphate test (for tinned Cu cable only))	-	500	-
4.2(Conductor resistance test)	-	1500	-
4.1(Wrapping test (for Al))	-	350	-
4.1(Tensile test (for Al)- After Stranding)	-	500	-
4.1(Tensile test (for Al)-Before Stranding)	-	2500	-
4.1(Annealing test (for copper))	-	350	-
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	250	-
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	250	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	250	-
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	250	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	250	-
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	250	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	250	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	250	-
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	250	-
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	250	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	250	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	250	-
(Cl.16.1) (Cl.19.1)(Conductor)	-	250	-
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	250	-
12(CONSTRUCTION Core Identification)	-	250	-
8.1(Sheath Material )	-	250	-
7(Binder Tape)	-	250	-
6.2(Filler)	-	250	-
6.1(Filler)	-	250	-
5.1(Insulation)	-	250	-
4.4(Joints in Conductor)	-	250	-
4.4(Joints in Conductor)	-	250	-
4.1(Conductor - Material)	-	250	-
4.1(Conductor - Material)	-	250	-
10.11(Persulphate Test )	-	250	-
12.0(Core identification)	-	250	-
4, IS 8130(Construction of conductor)	-	250	-
Table 2, IS 8130(No fo wire in a conductor)	-	250	-
8.3(Minimum thickness of Sheath)	-	250	-
8.3(Avarage thickness of Sheath)	-	250	-
5.3(Minimum thickness of insulation)	-	250	-
5.3(Avarage thickness of insulation)	-	250	-
Table 4(Copper purity test)	-	250	-
10.3(Spark test)	-	250	-
table 1, 4.2(insulation resistance test)	-	2000	-
5.4(Mechanical properties before and after ageing)	-	1000	-
10.3(Spark Test)	-	250	-
4.1(Material)	-	250	-
4.2(Electrical Resistance)	-	2500	-
5(INSULATION)	-	250	-
6(FILLER)	-	250	-
7(BINDER TAPE)	-	250	-
8(SHEATH)	-	250	-
9(OVERALL DIMENSIONS)	-	250	-
10.1(High Voltage Test (Water Immersion Test))	-	2500	-
10.2(High Voltage Test (at Room Temperature))	-	1000	-
10.3(Spark Test)	-	250	-
10.4(Flammability Test)	-	750	-
10.5(Oxygen Index Test)	-	2500	-
10.6(Test for Halogen Acid Gas Evolution)	-	2500	-
10.7(Test for Temperature Index)	-	2500	-
10.8(Smoke Density Rating)	-	2500	-
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	3500	-
10.1(Flex Test)	-	250	-
10.11(Persulphate Test)	-	250	-
11(IDENTIFICATION)	-	250	-
12(CORE IDENTIFICATION)	-	250	-
13(CABLE CODE)	-	250	-
15(PACKING AND MARKING)	-	250	-
16.1(Construction)	-	250	-
16.2(Tests)	-	250	-
17(SINGLE CORE NON-SHEATHED CABLES WITH FLEXIBLE CONDUCTOR FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	250	-
18(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-	250	-
19(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES/CORDS WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	250	-
20(MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	250	-
21(ARALLEL TWIN AND TWISTED TWIN FLEXIBLE PVC INSULATED UNSHEATHED CORDS (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	250	-
22(TWO AND THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED (CLASS 2 OR 5) FOR GENERAL PURPOSE( FOR MAXIMUM CONDUCTOR TEMPERA TURE 70°C OR 85°C))	-	250	-
(4.3 of IS 8130:2013)(Form of Conductor)	-	250	-
( 4.4.1 of IS 8130:2013)(Joints in Conductor)	-	250	-
(4.4.2 of IS 8130:2013)(Joints in Conductor Solid Conductors (Aluminium Conductors only))	-	250	-
(Cl.6.1.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	250	-
(Cl.6.1.2 of IS 8130:2013)(Solid Conductor (Class 1))	-	250	-
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	250	-
(6.2.1 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	250	-
(6.2.2 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	250	-
(6.2.3 of IS 8130:2013)(Stranded Circular Non-compacted Conductors (Class 2))	-	250	-
(6.3.1 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	250	-
(6.3.2 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	250	-
(6.3.3 of IS 8130:2013)(Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-	250	-
( 6.4.1 of IS 8130:2013)(Flexible Conductors (Class 5))	-	250	-
(6.4.2 of IS 8130:2013)(Flexible Conductors (Class 5))	-	250	-
( 6.4.3 of IS 8130:2013)(Flexible Conductors (Class 5))	-	250	-
Cl.19.1.4(Assembly of Cores)	-	250	-
Cl. 8.2(Application of Sheath)	-	250	-

22 May, 2029

-
included w.e.f 24.03.2026

JBS TESTING SOLUTIONS PVT LTD (27), JALANDHAR

9164606

IS 17404 (2020)

Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheets and Strips ” Specification

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(C -IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Mn - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(P - IS 228 )	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(S - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(N - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Al - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Si - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Cu - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Micro alloy element- IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Boron in micro alloy element- IS 228)	-	500	-
7.1 (As per IS 5986)(CE- IS 228)	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Yield strength - IS 1608(Pt-1))	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Tensile Strength - IS 1608(Pt-1))	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Elongation - IS 1608(Pt-1))	-	500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Min - IS 12860 & IS 6745)	-	500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Max - IS 12860 & IS 6746)	-	500	-
10.1(Coil Internal Diameter-IS17404)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Width)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Length)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Thickness)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(C -IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Mn - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(P - IS 228 )	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(S - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(N - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Al - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Si - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Cu - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Micro alloy element- IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Boron in micro alloy element- IS 228)	-	500	-
7.1 (As per IS 5986)(CE- IS 228)	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Yield strength - IS 1608(Pt-1))	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Tensile Strength - IS 1608(Pt-1))	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Elongation - IS 1608(Pt-1))	-	500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Min - IS 12860 & IS 6745)	-	500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Max - IS 12860 & IS 6746)	-	500	-
9.2.2-Table 2(Coating Adhesion Test- IS 17404)	-	500	-
10.1(Coil Internal Diameter-IS17404)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Width)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Length)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Thickness)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(C -IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Mn - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(P - IS 228 )	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(S - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(N - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Al - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Si - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Cu - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Micro alloy element- IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Boron in micro alloy element- IS 228)	-	500	-
7.1 (As per IS 5986)(CE- IS 228)	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Yield strength - IS 1608(Pt-1))	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Tensile Strength - IS 1608(Pt-1))	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Elongation - IS 1608(Pt-1))	-	500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Min - IS 12860 & IS 6745)	-	500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Max - IS 12860 & IS 6746)	-	500	-
9.2.2-Table 2(Coating Adhesion Test- IS 17404)	-	500	-
10.1(Coil Internal Diameter-IS17404)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Width)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Length)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Thickness)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(C -IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Mn - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(P - IS 228 )	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(S - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(N - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Al - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Si - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Cu - IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Micro alloy element- IS 228)	-	500	-
7.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Boron in micro alloy element- IS 228)	-	500	-
7.1 (As per IS 5986)(CE- IS 228)	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Yield strength - IS 1608(Pt-1))	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Tensile Strength - IS 1608(Pt-1))	-	500	-
8.3.1 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Elongation - IS 1608(Pt-1))	-	500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Min - IS 12860 & IS 6745)	-	500	-
9.1, 9.1.1-Table 1(Coating Mass per Surface, Max - IS 12860 & IS 6746)	-	500	-
9.2.2-Table 2(Coating Adhesion Test- IS 17404)	-	500	-
10.1(Coil Internal Diameter-IS17404)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Width)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Length)	-	500	-
10.2 (As per IS 1079, IS 5986, IS 513(pt-1 & 2))(Thickness)	-	500	-
13.1(Marking)	-	500	-
13.1(Marking)	-	500	-
9.2.2-Table 2(Coating Adhesion Test- IS 17404)	-	500	-

-
included w.e.f 24.03.2026

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number