BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11372 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

10831

BIS, Northern Regional Laboratory (NRL)

None

IS 3650 (1981)

Specification for combination side cutting pliers (Second Revision)

- View breakup
Rs 2850/- + Materials as per respective ISS Excluding Hard Wire Cutting Test, Soft Wire Cutting Test, Torsion Test, Handle Load Test and Bend Test

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 Table 1 (Dimensions- L)	-
3 Table 1 (Dimensions- a)	-
3 Table 1 (Dimensions- b)	-
3 Table 1 (Dimensions- c1)	-
3 Table 1 (Dimensions- e)	-
3 Table 1 (Dimensions- h)	-
3 Table 1 (Dimensions- h1)	-
3 Table 1 (Dimensions- t)	-
4 (Hardness- Near cutting edges)	-
4 (Hardness- Body gripping surfce)	-
3 Table 1 (Dimensions- t)	-

-
Excluding Tortion , handle load, bend test and Hard wire cutting test

10832

BIS, Central Laboratory (CL)

None

IS 4398 (1994)

Carbon - Chromium steel for the manufacture of balls, rollers and bearing races - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

10833

BIS, Central Laboratory (CL)

None

IS 10243 (1993)

2,4 - D ethyl ester EC- Specificationn (First Revision)

Rs.2750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 (Identity Test)	-
3.4.1 (Cold Test)	-
3.4.2 (Flash Point (Abel))	-
3.4.3 (Emulsion Stability)	-
3.5.1 (2,4-D Ethyl Ester EC content)	-
3.5.2 (Fee 2,4-D)	-

-
-

10834

BIS, Western Regional Laboratory (WRL)

None

IS 1029 (1970)

Specification for hot-rolled steel strip (Baling) (First Revision)

Rs.750/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4 (Sulphur -IS 228 or method specified in relevant ISO standard)	-
Cl.4 (Phosphorus -IS 228 or method specified in relevant ISO standard)	-

-
-

10835

BIS, Central Laboratory (CL)

None

IS 4397 (1999)

Cold - Rolled carbon steel strips for ball and roller bearing cages retainers - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

10836

BIS, Central Laboratory (CL)

None

IS 4224 (1972)

Specification for steel wire for staples, pins and clips (First Revision)

525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.1, Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

10837

BIS, Central Laboratory (CL)

None

IS 4223 (1975)

Steel Wire For Umbrella Ribs

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.1 (Sulphur- Appropriate parts of IS 228.)	-
Cl 6.1 (Phosphorus- Appropriate parts of IS 228.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

10838

BIS, Northern Regional Laboratory (NRL)

None

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 9 (Press)	-
Cl 10 (Sudden Load Applied)	-
Cl 11 (Expansion Test)	-
Cl 14 (Weldability)	-
Cl 15 (Length, Width & Thickness)	-
Cl 13 (Workmanship)	-
7.1 (Carbon %)	-
7.1 (Manganese %)	-
7.1 (Phosphorus %)	-
7.1 (Sulphur %)	-
7.1 (Silicon %)	-
7.1 (CE)	-
7.1 ( Nitrogen%)	-

-
Excluding Microalloying Elements

10839

BIS, Western Regional Laboratory (WRL)

None

IS 15961 (2012)

Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain)

Rs.4990 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 9 & Table 2 (Workmanship)	-
Cl 12 (Weight)	-
Cl 10 (Coating Adhesion )	-
Cl 13 (Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-
Cl 11 (Workmanship)	-
Cl. 13.7 (Deviation from Flatness (Steepness))	-
Cl. 13.6 (Deviation from Squareness (Out of Square))	-
Cl. 13.5 (Camber)	-
4, 5 (CARBON)	-
4, 5 (SULPHUR)	-
4, 5 (PHOSPHURS)	-
4.5 (MANGANESE)	-
Clause 9 (Coating Test (Triple Spot Test) (Total Both Surface))	-
Clause 9 (Coating Test (Single Spot Test) (Total Both Surface))	-
Clause 9 (Coating Test (Single Spot Test) (One Surface))	-

-
-

10840

BIS, Central Laboratory (CL)

None

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

Rs 2700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 6.1, Table-1 (Sulphur)	-
Clause 6.1, Table-1 (Phosphorus)	-
7 (Dimensions)	-
11 (Freedom from defects)	-
9.1 (Galvanizing Requirements )	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.2 (Mechanical Properties (as per IS 1717))	-
8.3 (Mechanical Properties (as per IS 1755))	-
14 (Marking)	-
14 (a) (Marking)	-
14 (b) (Marking)	-
14 (c) (Marking)	-
14 (d) (Marking)	-
14 (e) (Marking)	-
14 (f) (Marking)	-
14 (g) (Marking)	-
14.2 (Marking)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
11 (Freedom from defects)	-
9.1 (Galvanizing Requirements )	-
9.2 (Galvanizing Requirements )	-
9.3 (Galvanizing Requirements )	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.2 (Mechanical Properties (as per IS 1717))	-
8.3 (Mechanical Properties (as per IS 1755))	-
8.4 (Mechanical Properties (as per IS 10810(Part- 42)))	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding Except coating;

10841

BIS, Central Laboratory (CL)

None

IS 11646 : Part 2 (1986)

Specification for cane for visually handicapped: Part 2 folding type

Rs 4350/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (. Shape and Dimensions - As shown in Fig. 1.)	-
3.1 (Shaft/Tube)	-
3.2 (Grip)	-
3.3 (Tip)	-
3.4 (Coating)	-
3.5 (Inner Element)	-
2 (. Shape and Dimensions - As shown in Fig. 1.)	-
4.2 (GripThe grip may preferably be made of rubber compound. It may be moulded as shown in Fig. 1. The moulded grip shall have broader end at the top and gradually tapering at the lower end. The grip shall have flat surface in one bf the segment and the remaining portion may have a few ( 2 or 3 ) serrations for better grip. The weight of the grip shall be 70 to 90 g and length 175 to 225 mm. The grip shall be fixed on one end of the shaft with a strong adhesive. The hollowness may be filled in with a plastic button peg. The grip may have an elastic loop for handle at the top of)	-
4.1 (Shaft shall be made of tube of high tensile strength and ductility. The wall thickness of the tu-bes shall be minimum of 1 mm and outside~diameter of the tube at the centre shall be 12’5 mm minimum. The total length of the cane shall vary between 1 000 and 1 450 mm in steps of 50 mm.There may be 2 to 4 shafts which make it foldable)	-
4.3 (Ths tip may be made from suitable plastics as applicable to plastics for gear specified in IS : 7078-1973 ‘Specification for plastics used in instrument industry’ or any other material having property of good auditory impulse. The length of the tip outside the cane shall be 30 to 50 mm. The tip may have a peg hole at one end which shall be fixed into the other end of the shaft by either inserting or screwing it into the tube. The diameter of the tip shall be 12’5 mm minimum, and maybe half round at the bottom.)	-
4.4 ( Joints - The joints shall be such that it shall be easily fittable after disassembling. The joints may~be of taper type or peg type. In case of taper joint one end of the shaft is tapering and the other is done shaped. In case of peg type joint, either one end of the shaft is reduced in diameter by turning or a peg button is tightly fixed in the shaft to enable it to be fitted it in the female end of the shaft. The male and female parts shall fit into each other firmly (see Fig. 3 ). The shaft shall remain attached to when a single or double elastic cord is passed through. The elastic cord shall be fixed at the grip and the other end at the peg hold at the tip.)	-
5 (. Workmanship and Finish)	-
6.1 ( Endurance Test)	-

-
-

10842

BIS, Central Laboratory (CL)

None

IS 8708 (2006)

Mancozeb wettable powder - Specification (First Revision)

Rs 3900/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Sieving Requirement)	-
3.2.3 (Suspensibility)	-
3.2.4 (Wettability)	-
3.3.1 (Mancozeb Content)	-
3.3.2 (Zinc Content)	-
3.3.3 (Manganese Content)	-

-
Excluding Cl. 3.3.2 & Cl. 3.3.3 Zinc & Manganese Content;

10843

BIS, Northern Regional Laboratory (NRL)

None

IS 459 (1992)

Corrugated and semi - Corrugated asbestos cement sheets - Specification (Third Revision)

- View breakup
Hence, testing charges (rounded to nearest Rs. 50.00) for the product is : 6000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Depth of Corrugation, D - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Pitch of Corrugation, P - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Overall width, B - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Effective Width, C - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Nominal Thickness, T - Cl. 5)	-

-
Excluding load bearing test

10844

BIS, Central Laboratory (CL)

None

IS 3885 : Part 2 (1992)

Steel for the manufacture of laminated springs (Railway Rollingstock): Part 2 rib and groove sections (Second Revision)

Rs. 900 Chemical View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.1, 6.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding Except vanadiium as per table 1;

10845

BIS, Central Laboratory (CL)

None

IS 3885 : Part 1 (1992)

Steel for the manufacture of laminated springs (Railway Rolling Stock): Part 1 flat sections - Specification (Second Revision)

Rs. 975/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.1, 6.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

10846

BIS, Northern Regional Laboratory (NRL)

None

IS 12109 (1987)

General requirements for light duty sewing machine heads for industrial use

Rs 5880/- + Materials as per respective ISS View breakup
Rs 5880/- + Materials as per respective ISS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.5 (Construction and Function)	-
6.2 Table 1 (Accuracy Requirement Needle Bar - Measuring Condition - Needle bar at lowermost position)	-
6.2 Table 1 (Accuracy Requirement Needle Bar - Measuring Condition - Needle bar at lowermost position)	-
6.2 Table 1 (Accuracy Requirement Thread takeup lever - Measuring Condition - Thread take up lever at top and intermediate position of motion)	-
6.1 (Accuracy Requirement)	-
6.2 Table 1 (Accuracy Requirement Thread takeup lever - Measuring Condition - Thread take up lever at top and intermediate position of motion)	-
6.2 Table 1 (Accuracy Requirement Rotating hook- Measuring Condition - With bobbin-case removed, play of rotating hook bobbin case holder )	-
6.2 Table 1 (Accuracy Requirement Rotating hook- Measuring Condition - With bobbin-case removed, play of rotating hook bobbin case holder )	-
7 Table 1 (Durability Requirements Feed machanlsm- Measuring Condition - Feed dog at the highest position above the needle plate )	-
7 Table 1 (Durability Requirements Rotating hook- Measuring Condition - With bobbin-case removed, play of rotating hook bobbin case holder )	-
7 Table 1 (Durability Requirements Arm shaft - Measuring Condition - Shaft end )	-
7 Table 1 (Durability Requirements Rotating hook shaft- Measuring Condition - Shaft end )	-
8 Table 2 (Sewing Requirement)	-
8 Table 3 (Sewing Requirement)	-
8 Table 2 (Sewing Requirement)	-
8 Table 2 (Sewing Requirement)	-
8 Table 2 (Sewing Requirement)	-
2.5 (Construction and Function)	-
2.1 (Construction and Function)	-
2.3 (Construction and Function)	-
2.4 (Construction and Function)	-
2.6 (Construction and Function)	-
2.7 (Construction and Function)	-
3.1 (Finish)	-
3.2 (Finish)	-
5 (Lubrication)	-
10 (Marking)	-
10 (Marking)	-
3.1 (Finish)	-

-
Test facility is complete

10847

BIS, Northern Regional Laboratory (NRL)

None

IS 362 (1991)

Parliament Hinges -specification

- View breakup
Rs.2250/- and material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-A)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-B)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-C)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-D)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-d)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-E)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-Thickness of Flap)	-
5.1-Table 4 (Dimensions for Mild Steel Parliament Hinges-A)	-
5.1-able 3 (Dimensions for Cast Brass Parliament Hinges-B)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-C)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-D)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-d)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-E)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-Thickness of Flap)	-
6.1 (MANUFACTURE-General)	-
6.1 (MANUFACTURE-General)	-
6.1 (MANUFACTURE-General)	-
6.2 (MANUFACTURE-Knuckles)	-
6.2 (MANUFACTURE-Knuckles)	-
6.2 (MANUFACTURE-Knuckles)	-
6.2 (MANUFACTURE-Knuckles)	-
6.3 (MANUFACTURE-Pins)	-
6.3 (MANUFACTURE-Pins)	-
6.3 (MANUFACTURE-Pins)	-
6.3 (MANUFACTURE-Pins)	-
6.4 (MANUFACTURE-Screw Holes)	-
6.5 (MANUFACTURE-Position of Holes)	-
6.5 (MANUFACTURE-Position of Holes)	-
6.5 (MANUFACTURE-Position of Holes-minimum distance from the ends of the flap)	-
6.5 (MANUFACTURE-Position of Holes-minimum distance from the inner edge)	-
6.5 (MANUFACTURE-Position of Holes)	-
7.1 (FINISH)	-
7.3 (FINISH)	-

-
Facility for chemical testing is not available

10848

BIS, Western Regional Laboratory (WRL)

None

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

- View breakup
Rs. 6375/- excluding composition, effect on water, hydrostatic characteristics and thermal stability by hydrostatic pressure testing.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 IS 12235 (Part 1) Table 2 (Dimension of Pipes: Mean outside Diameter)	-
7.1,7.1.1 IS 12235 (Part 1) Table 2 (Outside Diameter at any point)	-
7.1.2 IS 12235 (Part 1) Table 2 (Wall Thickness )	-
9.2 IS 12235 (Part 3) (Opacity)	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2) (Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-
9.5 IS 12235(Part 2) (Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-
9.6 IS 12235(Part 14) (Density)	-
10.3 IS 4985 Table 4 (Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-
10.4 IS 12235(Part 19) (Flattening Test)	-
10.5 IS 12235(Part 13) (Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-
7.1,7.1.1 IS 12235 (Part 1) Table 2 (Outside Diameter at any point)	-
7.1.2 IS 12235 (Part 1) Table 2 (Wall Thickness )	-

-
The following test facilities are not available: (1) Verification of the Malfunction temperature Cl 6.3.2 (2) Effect on water Cl.9.3 (3) Hyd. characteristics Cl.10.1 for 165 Hr and 1000 Hr (4) thermal stability test.Cl.10.2

10849

BIS, Western Regional Laboratory (WRL)

None

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

- View breakup
Rs. 3450/- excluding composition of material, ring stiffness, resistance to external blows at 0 degree C, acceptance test, type test, internal hydrostatic pressure, internal negative hydrostatic pressure (Cl. 10.1.2 & Cl. 10.2.2).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1,6.1.1 IS 12235 (Part 1) Table 1 (Dimension of Pipes: Mean outside Diameter, dem)	-
6.1,6.1.1 IS 12235 (Part 1) Table 1 (Outside Diameter at any point, de)	-
6.1.2 IS 4985 Table 2 (Wall Thickness, e )	-
6.1.4, Table 3 (Dimensions of integral sockets and spigot ends :- a) Elastomeric Sealing Ringsockets and spigot ends i)Meean inside dia. Of socket, dsm)	-
6.1.4, Table 3 (ii) Min. depth of engagement, A. )	-
6.1.4 Table 3 (iii) Depth of sealing Zone C )	-
6.1.4, Table 3 (iv) Length of spigot, l1)	-
6.1.4, Table 3 (v) Chamfer length, H : Approx.)	-
6.1.4.1 (wall thickness of sockets e2 min=0.9e )	-
6.1.4, Table 4 (b) Solvent Cement Joint sockets and spigot ends i) Mean inside dia. Of socket, dsm)	-
6.1.4, Table 4 (ii) Length of Solvent Cement socket, l2 )	-
6.1.4, Table 4 (iii) Length of spigot, l1, 100 mm Min.)	-
6.1.4, Table 4 (iv) Chamfer length, H, 7 mm Approx.)	-
7.3 IS 1223S ( Part 2) (Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-
7.4 IS 1223S ( Part 5) (Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6 (Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-
6.1.3 (Length of Pipe)	-
8.1 Annex B (Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-

-
The following test facilities are not available: (1) Ring Stiffness (2)Elastomeric Sealing ring (3)Internal Hydrostatic Pressure for sealing ring joints (4)Intenal negative hydrostatic pressure set up. (5)Effect on water (6) TF above 250 mm

10850

BIS, Western Regional Laboratory (WRL)

None

IS 14899 (2014)

Liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision)

- View breakup
Rs. 21363/- (excluding Out of roundness, Hardness test, Pneumatic test, Radiographic examination, Bonfire test, Crash test and Strength assessment) + testing charges as per referred ISS.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.1.5 (Inner surface in tension)	-
10.1.5 (Outer surface in tension)	-
10.1.8 (Water Capacity)	-
10.1.6 (Macroscopic Examination On Circumferential Weld )	-
10.1.6 (Macroscopic Examination On longitudinal Weld)	-
10.1.6.1 (Macroscopic Examination, m1,Through valve boss )	-
10.1.6.1 (Macroscopic Examination, m2,Through valve plate welds)	-
11 (Surface coating and colour)	-

-
Test facilities are not available for the following: (1) ( Cl. 10.5.1) - Radiographic examinations, (2) (Cl.10.6.1) Bonfire test, (3) (Cl.10.6.3) - Crash test, (4) (cl.10.6.2) - Fatigue Test (5) Chemical composition( Ni, Cr, N )

10851

BIS, Bengaluru Branch Laboratory (BNBL)

None

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

Rs.12900/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 ii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
4.1 - Table - 1 iii (Magnesia - Cl 4.8 of IS 4032:1985)	-
4.1 - Table - 1 iv (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
4.1 - Table - 1 vi (Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate ( C4AF + 2C3A ) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 vii (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
4.1 - Table - 1 v (Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-
5.1 (Fineness 4031 Part 2)	-
5.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
5.2.1.1 (Expansion after aeration- 4031 Part 3)	-
5.2.1 (Expansion by Autoclave- 4031 Part 3)	-
5.2.1.1 (Expansion after aeration- 4031 Part 3)	-
5.3 a) (Setting Time Initial- 4031 Part 5)	-
5.3 b) (Setting Time Final- 4031 Part 5)	-
5.5 i) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
5.5 ii) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
5.5 iii) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-

-
Expect Transverse Strength

10852

BIS, Western Regional Laboratory (WRL)

None

IS 13997 (2014)

Drums, large open top - Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5, Table 1 (Dimensions-D2)	-
5, Table 1 (Dimensions-D3)	-
5, Table 1 (Dimensions-D4)	-
5, Table 1 (Dimensions-H1)	-
5, Table 1 (Dimensions-H5)	-
5, Table 1 (Dimensions-h2)	-
5, Table 1 (Dimensions-h3)	-
5, Table 1 (Dimensions-h4)	-
5, Table 1 (Dimensions-p1)	-
6.2 (The nominal thickness of steel sheets for body and ends )	-
7.2 ( CONSTRUCTION)	-
7.3 ( CONSTRUCTION- Double Seam/Spiral Seam/Triple Seam Construction for Grade A Drums)	-
7.4 ( CONSTRUCTION-Spiral Seam/Triple Seam Construction for Grade B Drums)	-
7.4 ( CONSTRUCTION-Spiral Seam/Triple Seam Construction for Grade B Drums-Seam rolling layers)	-
7.5 ( CONSTRUCTION)	-
7.6 ( CONSTRUCTION)	-
7.7 ( CONSTRUCTION)	-
7.8 ( CONSTRUCTION- crest to trough gap)	-
7.8 ( CONSTRUCTION- no of corrugations on the body Each side)	-
7.9 (Closures)	-
7.10(a) (Closures)	-
7.10(b) (Closures)	-
7.10(c) (Closures)	-
7.10(d) (Closures)	-
7.11 ( Locking Ring)	-
8.1 (FINISH )	-
9 (leakage test)	-

-
-

10853

BIS, Central Laboratory (CL)

None

IS 3829 : Part 3 (1985)

Specification for steam sterilizers: Part 3 pressure sterilizers, vertical cylindrical type

- View breakup
Rs.3822/- and material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (Carbon- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Sulphur- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Manganese- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Silicon- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Nitrogen- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Nickel- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Chromium- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Titanium- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Niobium- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Molybdenum- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (Copper- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (As per IS 513- Relevant parts of IS 228 or any other established instrumental/Chemicall method)	-
5.1 (As per IS 737- Relevant parts of IS 504 or any other established instrumental/Chemicall method)	-
5.1 (As per IS 306 or IS 318- Relevant parts of IS 4027 or any other established instrumental/Chemicall method)	-
4.1 (Shape)	-
4.2 (Size)	-
6.1 (as per Cl. 6.1)	-
6.1.2 (Shell)	-
6.1.3 (as per Cl. 6.1.3)	-
6.2 (Lid)	-
6.3 (Lid Gasket)	-
7.1.2 (Safety Valve- Cl. 7.1.2)	-
7.1.3 (as per Cl. 7.1.3)	-
7.1.4 (as per Cl. 7.1.4)	-
8.1 (Hydrostatic Test- as per Cl 8.1.1)	-

-
-

10854

BIS, Central Laboratory (CL)

None

IS 9471 : Part 6 (2000)

Modular lower limb orthotic components part 6 orthotic hip joint (Joint Unit, Hip Drop Lock) - Specification

Rs.1050/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Shape and Dimensions)	-
4.2 (Joint Hip Lower)	-
5.1 (Workmanship and Finish)	-
6 (Functional Requirements)	-
7 (Bend Test)	-
Cl.4.1 of IS 9471(Part-6) & IS 6911 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-6) & IS 6911 (Sulphur- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-6) & IS 6911 (Phosphorus- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-6) & IS 6911 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-6) & IS 6911 (Nitrogen- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.3 of IS 9471(Part-6) & IS 6911 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.3 of IS 9471(Part-6) & IS 6911 (Sulphur- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.3 of IS 9471(Part-6) & IS 6911 (Phosphorus- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.3 of IS 9471(Part-6) & IS 6911 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.3 of IS 9471(Part-6) & IS 6911 (Nitrogen- Relevant parts of IS 228 or by other instrumental and chemical method)	-

-
-

10855

BIS, Western Regional Laboratory (WRL)

None

IS 13983 (1994)

Stainless Steel Sinks For Domestic Purposes

Rs.14635/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Thickness of sheet/strip)	-
6 (Depth of bowl)	-
6 (Internal dimensions of the bowl)	-
6 (Bowl locating limits)	-
6 (Co-ordinating sizes)	-
7.5 (Tap holes)	-
7.6 (Overflows)	-

-
Test facilities are not available for the following: 1. Ni, Cr, Nitrogen as per IS 5522

10856

BIS, Northern Regional Laboratory (NRL)

None

IS 623 (2008)

Bicycle - Bicycle frames - Specification (Third Revision)

Rs. 3477/- excluding Threads. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4 (DIMENSIONS)	-
6 (FINISH)	-
7.1 (a) TRUENESS OF FRAME)	-
7.3 (d) TEST FOR FINISH)	-
7.2.1 (b) IMPACT TEST (Falling Mass))	-
7.2.2 (c) IMPACT TEST (Falling Frame & Fork Assembly))	-
3.2, 3.3 (sulphur)	-
3.2, 3.4 (phosphorus)	-
7.3 (d) TEST FOR FINISH)	-

-
For complete testing compatible fork and inflated tyre with rim may be provided

10857

BIS, Eastern Regional Laboratory (ERL)

None

IS 963 (1958)

Specification for chrome molybdenum steel bars and rods for aircraft purposes

All grades except for the tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
6.1 (Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4 (Freedom from defects)	-
7.5 (Hardness)	-
7.6.2 (i) Yield stess/.2% Proof stress, Mpa)	-
7.6.2 (ii)Ultimate Tensile Strength, Mpa)	-
7.6.2 (iii)Elongation, %)	-
7.6.2 (iv) Reduction in area)	-
7.2 (Grain Size)	-
7.3 (Macro examination)	-
7.4 (Decarburisation)	-
7.1 (Hardenability)	-
9 (Rolling Tolerances)	-

-
Chem- Facility not available for Mo.

10858

BIS, Western Regional Laboratory (WRL)

None

IS 13487 (1992)

Irrigation equipment - Emitters - Specification

Rs.4200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.2 (Flow path in emitters)	-
7.3.1 (Resistance to Hydrostatic pressure)	-
7.3.2 (Resistance to Hydrostatic pressure)	-
7.1 (Construction and workmanship)	-
7.4.2 (Emitter Pull Out On-line emitters)	-
8.1.2 (Uniformity of Emission Rate Unregulated emitters)	-
8.2.2 (Emission rate as a function of inlet pressure Unregulated emitters)	-
8.3 (Determination of Emitter Exponent)	-
4 (Classification)	-

-
-

10859

BIS, Central Laboratory (CL)

None

IS 9471 : Part 5 (1980)

Specification for modular lower limb orthotic components: Part 5 joint unit, knee

Rs. 1800/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Dimensions. L(±0.5))	-
3.2 (Overall Dimensions. Fig. 1)	-
3.3 (In the case of free motion, limited motion and foot drop ankle joint unit, the inside (medical) joints shall be contoured to 15 f l”, as shown in Fig. 2 and the outside ( lateral) joints shall be straight, mm)	-
3.4 (Depth of Slot)	-
3.5 (A rivet of minimum 4 mm diameter shall be used)	-
4.4 (The rivet shall be manufactured from a suitable aluminum alloy.)	-
5.1 (Workmanship and Finish)	-
Cl.4.1 of IS 9471(Part-5) & IS 6911 (Carbon- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-5) & IS 6911 (Sulphur- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-5) & IS 6911 (Phosphorus- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-5) & IS 6911 (Manganese- Relevant parts of IS 228 or by other instrumental and chemical method)	-
Cl.4.1 of IS 9471(Part-5) & IS 6911 (Nitrogen- Relevant parts of IS 228 or by other instrumental and chemical method)	-

-
-

10860

BIS, Western Regional Laboratory (WRL)

None

IS 13422 (1992)

Disposable surgical rubber gloves specification

Rs.6900.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.2 and Table 1 Fig. 1 (Dimensions - Length)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Width)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Thickness of Finger)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Thickness of Palm)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Thickness of Cuff)	-
5.3 and Table 2 ( Tensile Strength Before Ageing)	-
5.3 and Table 2 ( Elongation at Break Before Ageing)	-
5.3 and Table 2 (Stress at 500% Elongation at Break Before Ageing)	-
5.3 and Table 2 ( Tensile StrengthAfter Accelerated Ageing)	-
5.3 and Table 2 ( Elongation at Break After Accelerated Ageing)	-
5.5 (Airtight Test)	-
4 (TYPES)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Thickness of Cuff)	-
5.3 and Table 2 (Stress at 500% Elongation at Break Before Ageing)	-
5.2.1 (General Characteristics and Dimensions)	-

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number