BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15263 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

11131

IRCLASS Systems And Solutions Private Limited, Jaipur

8179206

IS 13334 : Part 1 (2014)

Skimmed milk powder - Specification: Part 1 standard grade (Second Revision)

21050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.6(Listeria monocytogenes)	-	1400	NA
5.6(Salmonella)	-	1000	NA
5.6(Coagulase positive Staphylococcus aureus)	-	1200	NA
5.6(Spore count, Anaerobic (Sulfite reducing Clostridia))	-	1500	NA
5.6(Spore count, Aerobic (Bacillus cereus))	-	600	NA
5.6(Escherichia coli)	-	1000	NA
5.6(Coliform count )	-	500	NA
5.6(Bacterial count)	-	500	NA
5.6(Scorched particles)	-	1000	NA
5.6(Insolubility index)	-	300	NA
5.6(Milk fat)	-	350	NA
5.6(Milk protein in milk solids not fat)	-	500	NA
5.6(Moisture)	-	200	NA
5.7(Pesticides, Heavy metals, toxins & contaminants)	-	11000	NA

06 Aug, 2027

-
-

11132

BIS, Central Laboratory (CL)

None

IS/ISO 22702 (2003)

Uitility lighters - General consumer - Safety requirements

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Structural-integrity requirements- general)	-
8.0 (marking )	-

-
-

11133

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

21690.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Raw Material)	-	3050.00	Optional (Applicable on Raw Material) Material Identification = 1050 Overall Migration = 1700 Specimen Charge= 300
3.2(Tapes – Width )	-	500.00	-
3.2(Tapes – Linear Density )	-	700.00	-
3.3(Tying Cord)	-	3850.00	Optional (Applicable on Tying Cord) Material Identification of Tying Cord= 1050 Type of Rope =500 Linear density = 700 Minimum Breaking Strength= 1100 Construction = 500
3.4.1(Seam)	-	500.00	-
4.1 and Table 1 i a(Dimensions Outside Length)	-	500.00	-
4.1 and Table 1 i b(Dimensions Outside Width)	-	500.00	-
4.1 and Table 1 ii(Ends per dm )	-	500.00	-
4.1 and Table 1 iii(Picks per dm )	-	500.00	-
4.2 and Table 1 iv(Mass of sack )	-	500.00	-
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	1100.00	-
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	1100.00	-
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	1100.00	-
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	12540.00	Testing Charge- 2200.00 Conditioning Charge= 10340.00
4.1 and Table 1 ix(Ash content )	-	1200.00	-
3.3(Tying Cord)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
3.4(Sack)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
3.4.1(Seam)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
3.4.1(Seam)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
3.4.1(Seam)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
3.1(Raw Material)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
3.2(Tapes – Width )	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
3.2(Tapes – Linear Density )	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
3.3(Tying Cord)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
3.3(Tying Cord)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
3.3(Tying Cord)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
3.4(Sack)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
3.4.1(Seam)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
3.4.1(Seam)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
3.4.1(Seam)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
3.4.1(Seam)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
4.1 and Table 1 i b(Dimensions Outside Width)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
4.1 and Table 1 iii(Picks per dm )	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
4.2 and Table 1 iv(Mass of sack )	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
4.1 and Table 1 v a(Average breaking strength of fabric Warpway )	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
4.1 and Table 1 v b(Average breaking strength of fabric Weftway )	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
4.1 and Table 1 vi(Average Breaking strength of bottom seam )	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
4.1 and Table 1 vii a(Elongation at break of fabric Lengthwise)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
4.1 and Table 1 vii b(Elongation at break of fabric Widthwise )	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
4.1 and Table 1 viii(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
4.1 and Table 1 ix(Ash content )	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
3.3(Tying Cord)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
4.1 and Table 1 i a(Dimensions Outside Length)	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
4.1 and Table 1 ii(Ends per dm )	-	0.00	ALREADY CHARGES TAKLEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.

24 Apr, 2027

-
-

11134

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 21 (1992)

Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)

All Type

5700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Bend Test (Radius of Bend))	-	700	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm))	-	1000	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(Tensile Strength)	-	1500	-
4.2, Table 2 of IS:21 (Designation & Condition 64430, WP')(0.2 Percent Proof Stress)	-	1000	-
4.2, Table 1of IS:21 (Designation 64430)(Aluminium)	-	300	-
4.2, Table 1of IS:21 (Designation 64430)(Lead)	-	300	-
4.2, Table 1of IS:21 (Designation 64430)(Chromium)	-	300	-
4.2, Table 1of IS:21 (Designation 64430)(Titanium and or other grain refining elements)	-	300	-
4.2, Table 1of IS:21 (Designation 64430)(Zinc)	-	300	-
4.2, Table 1of IS:21 (Designation 64430)(Manganese)	-	300	-
4.2, Table 1of IS:21 (Designation 64430)(Iron)	-	300	-
4.2, Table 1of IS:21 (Designation 64430)(Silicon)	-	300	-
4.2, Table 1of IS:21 (Designation 64430)(Magnesium)	-	300	-
4.2, Table 1of IS:21 (Designation 64430)(Copper)	-	300	-
4.2, Table 1of IS:21 (Designation 19600)(Cu+Si+Fe+Mn+Zn)	-	300	-
4.2, Table 1of IS:21 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn)	-	300	-
5(Marking)	-	200	-

-
-

11135

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 16720 (2018)

Pulverized Fuel Ash-Cement Bricks- Specification

All Type

8450 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1 and fig.1A &1B(Dimensions- Length (L) )	-	300	-
4.1 and fig.1A &1B(Dimensions- Width (B) )	-	300	-
4.1 and fig.1A &1B(Dimensions- Height (H))	-	300	-
4.1 & 4.3 and fig.1A &1B(Dimensions - Depth)	-	300	-
4.1 and fig.1A &1B(Dimensions)	-	0	-
4.1 and fig.1A &1B(Dimensions)	-	0	-
5 and Tanle 1 (CLASSIFICATION)	-	0	-
8.1(GENERAL)	-	500	-
8.3(Density Annex C of IS 2185 (Part 1))	-	750	-
8.4 and Table 1(Compressive Strength - Individual IS 3495 (Part 1))	-	2000	-
8.4 and Table 1(Compressive Strength - Average IS 3495 (Part 1))	-	500	-
8.5(Drying Shrinkage IS 4139)	-	2500	-
8.6(Water Absorption IS 3495 (Part 2))	-	1000	-

-
-

11136

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 16011 (2012)

Aluminium and aluminium alloy foil for pharmaceutical packaging - Specification

All Type

4100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5- Table-1(Pin hole count- IS 16011)	-	300	-
6(Freedom from defects- IS 16011)	-	500	-
7.1(Al - IS 504)	-	300	-
7.1(Cu - IS 504)	-	300	-
7.1(Mn - IS 504)	-	300	-
7.1(Si - IS 504)	-	300	-
7.1(Fe- IS 504)	-	300	-
7.1(Mn- IS 504)	-	300	-
7.1(Zn- IS 504)	-	300	-
7.1(Cr- IS 504)	-	300	-
7.1(Ti- IS 504)	-	300	-
11(AVERAGE THICKNESS OF BARE FOIL - IS 16011)	-	200	-
13.2(Width- IS 16011)	-	200	-
6(Freedom from defects- IS 16011)	-	500	-
18.1(marking)	-	200	-
16.2.2 ,table -7(SAMPLING)	-	200	-
16.2.1 , table -7(SAMPLING)	-	200	-
15.2(SURFACE CONDITION)	-	200	-
15.1(SURFACE CONDITION)	-	500	-
14.3 table -6(Sealing Strength (for Coated Blister Pack Foil and Pharma Laminate))	-	500	-
14.2 table -5(Peel Strength (for Pharma Laminate))	-	500	-
14.1.1(Bursting Strength)	-	500	-
14.1 table -4(Bursting Strength)	-	500	-
13.2 table 3(DIMENSIONS AND TOLERANCES)	-	200	-
13.1(DIMENSIONS AND TOLERANCES)	-	200	-
12.3(Winding)	-	200	-
12.2(Coated Blister Pack Foil)	-	500	-
12.1(Pharma Laminate)	-	500	-
11.2(AVERAGE THICKNESS OF BARE FOIL)	-	200	-
10 TABLE -2(PREFERRED THICKNESSES)	-	200	-
9(LUBRICANTS)	-	500	-
8(SUPPLY OF MATERIAL)	-	500	-
7.5(MATERIAL)	-	200	-
7.4(MATERIAL)	-	200	-
7.3(MATERIAL)	-	200	-
7.2(MATERIAL)	-	200	-
7.1(MATERIAL)	-	200	-
6(FREEDOM FROM DEFECTS)	-	500	-
5 table -1(PINHOLE COUNT)	-	200	-
15.2(SURFACE CONDITION- IS 16011)	-	500	-
15.1(SURFACE CONDITION- IS16011)	-	500	-
14.3-Tsable 6(Sealing Strength (for Pharma Laminate))	-	500	-
14.3-Tsable 6(Sealing Strength (for Coated Blister Pack Foil ))	-	500	-
14.2-Tsable 5(Peel Strength (for Pharma Laminate))	-	500	-
14.1-Tsable 4(Bursting strength for pharma laminate)	-	500	-
14.1-Tsable 4(Bursting strength for bare strip pack foil )	-	500	-
13.2(Width- IS 16011)	-	200	-
13.1(thickness of laminated products - IS 16011)	-	200	-
12.3(Winding- IS 16011)	-	200	-
12.2(Coated Blister Pack Foil- IS 16011)	-	200	-
12.1(Pharma Laminate - IS 16011)	-	200	-
9(LUBRICANTS- IS 16011)	-	500	-
7.5(Material - IS 16011)	-	500	-
7.4(Material - IS 16011)	-	500	-
7.3(Material - IS 16011)	-	500	-
7.2(Material - IS 16011)	-	500	-
7.1(Ti- IS 504)	-	300	-
7.1(Cr- IS 504)	-	300	-
7.1(Zn- IS 504)	-	300	-
7.1(Mn- IS 504)	-	300	-
7.1(Fe- IS 504)	-	300	-
7.1(Si - IS 504)	-	300	-
7.1(Mn - IS 504)	-	300	-
7.1(Cu - IS 504)	-	300	-
7.1(Al - IS 504)	-	300	-
5- Table-1(Pin hole count- IS 16011)	-	300	-
15.2(SURFACE CONDITION- IS 16011)	-	200	-
15.1(SURFACE CONDITION- IS16011)	-	200	-
14.3-Tsable 6(Sealing Strength (for Pharma Laminate))	-	500	-
14.3-Tsable 6(Sealing Strength (for Coated Blister Pack Foil ))	-	500	-
14.2-Tsable 5(Peel Strength (for Pharma Laminate))	-	500	-
14.1-Tsable 4(Bursting strength for pharma laminate)	-	500	-
14.1-Tsable 4(Bursting strength for bare strip pack foil )	-	500	-
7.2(Material - IS 16011)	-	200	-
7.3(Material - IS 16011)	-	200	-
7.4(Material - IS 16011)	-	200	-
7.5(Material - IS 16011)	-	200	-
9(LUBRICANTS- IS 16011)	-	200	-
11(AVERAGE THICKNESS OF BARE FOIL - IS 16011)	-	200	-
12.1(Pharma Laminate - IS 16011)	-	200	-
12.2(Coated Blister Pack Foil- IS 16011)	-	200	-
12.3(Winding- IS 16011)	-	200	-
13.1(thickness of laminated products - IS 16011)	-	200	-

-
-

11137

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 736 (1986)

Specification for wrought aluminium and aluminium alloy plate for general engineering purposes (Third Revision)

All Type

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Freedom from defect)	-	400	-
5(chemical composition)	-	2700	-
6.1 table 2(0.2% proof strength)	-	1000	-
6.1 table 2(tensile strength)	-	1500	-
6.1 table 2(Elongation)	-	1000	-
8(Dimensions & Tolerances)	-	600	-

-
-

11138

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 2590 (1987)

Specification for primary aluminium ingots for remelting for general engineering purposes (Second Revision)

All Type

4300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General requirements )	-	0	-
4(Manufacture )	-	0	-
5(Grades)	-	0	-
6.1(Chemical composition )	-	3500	-
7.1(Shapes and sizes)	-	600	-
9(Marking)	-	200	-

-
-

11139

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 4026 (2007)

Aluminium ingots, billets and wire bars (Ec Grade) (Fourth Revision)

All Type

3600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Shapes and Sizes)	-	600	-
Clause 8 Table 1(CHEMICAL COMPOSITION 1) Aluminium ,& min)	-	500	-
Clause 8 Table 1(2) Silicon)	-	500	-
Clause 8 Table 1(Chemical Composition 3) Iron)	-	500	-
Clause 8 Table 1(Chemical Composition 4) Copper)	-	500	-
Clause 8 Table 1(Chemical Composition 5) Titanium+ Vanadiun)	-	500	-
Clause 8 Table 1(Chemical Composition 6) Manganese, Zirconium and Chromium)	-	500	-

-
-

11140

GLOBAL COMPLIANCE LABORATORY INDIA, GHAZIABAD

5172706

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

Class-1 / Class-2 / Class-3

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	4000	-
1.7(Markings and instructions)	-	1000	-
2.1(Protection from electric shock and energy hazards)	-	2000	-
2.2(SELV circuits)	-	2000	-
2.3(TNV circuits)	-	2500	-
2.4(Limited current circuits)	-	3000	-
2.5(Limited power sources .)	-	2500	-
2.6(Provisions for earthing and bonding)	-	3000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	1000	-
2.8(Safety interlocks)	-	3000	-
2.9(Electrical insulation)	-	7000	-
2.10(Clearances, creepage distances and distances through insulation)	-	2500	-
3.1(General)	-	1000	-
3.2(Connection to a mains supply)	-	2000	-
3.3(Wiring terminals for connection of external conductors)	-	3000	-
3.4(Disconnection from the mains supply)	-	3000	-
3.5(Interconnection of equipment)	-	2000	-
4.1(Stability)	-	3000	-
4.2(Mechanical strength)	-	2000	-
4.3(Design and construction)	-	2000	-
4.4(Protection against hazardous moving parts)	-	2000	-
4.5(Thermal requirements)	-	5000	-
4.6(Openings in enclosures)	-	2000	-
4.7(Resistance to fire)	-	2500	-
5.1(Touch current and protective conductor curren)	-	2500	-
5.2(Electric strength)	-	2500	-
5.3(Abnormal operating and fault conditions)	-	1000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1250	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1250	-
7.1(General)	-	625	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	625	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	625	-
7.4(Insulation between primary circuits and cable distribution systems)	-	625	-
1.5(Components)	-	1000	Facility not available
1.5(Components)	-	1000	-

20 Jun, 2029

-
Exclusion: Cl. 1.5 (Components), Cl. 2.8.5 (Moving parts), Cl. 2.8.7 (Switches and relays), Cl. 2.10.5.4 (Semiconductor devices), Cl. 2.10.8.1 (Tests on coated printed boards and coated components), Cl. 3.2.5.1 (AC Power supply cords), Cl. 4.2.8 (cathode ray Tube), Cl. 4.3.8 (Batteries), Cl. 4.3.12 (Flammable liquids), Cl. 4.3.13.2 (Ionizing Radiation), Cl. 4.3.13.3 (Effect of ultraviolet (UV) radiation on material), Cl. 4.3.13.4 (Human exposure to ultraviolet (UV) radiation), Cl. 4.3.13.5 (Effect of Lasers (including LEDs)), Annex-U (Insulating winding wires).

11141

GLOBAL COMPLIANCE LABORATORY INDIA, GHAZIABAD

5172706

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

Class-1, 2 and 3

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	10000	-
7(Heating under normal operating conditions)	-	10000	-
8(Constructional requirements with regard to the protection against electric shock)	-	4000	-
9(Electric shock hazard under normal operating conditions)	-	5000	-
10(Insulation requirements)	-	8000	-
11(Fault conditions)	-	5000	-
12(Mechanical strength)	-	5000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	5000	-
15(TERMINALS)	-	3000	-
16(External flexible cords)	-	4000	-
17(Electrical connections and mechanical fixings)	-	5000	-
19(Stability and mechanical hazards)	-	5000	-
20(Resistance to fire)	-	5000	-
6.3()	-	2000	-

20 Jun, 2029

-
Exclusion: Cl. 6.1 (Ionizing radiation), Cl. 6.2 (Laser Radiation), Cl. 8.17 (Wound Components), Cl.13.5 (Printed boards), Cl. 14 (Components), Cl. 14.10 (Motor testing), Cl. 18 (Mechanical strength of picture tubes and protection against the effects of implosion), Cl.19.6 (Mechanical strength of Glass).

11142

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 16703 (2017)

Textiles - High density polyethylene (HDPE) polypropylene (PP) woven sacks for packaging of 25 kg polymer materials - Specification

23680.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2 Table 1(Mass of sack, Gusseted type, g - IS 1964)	-	500.00	-
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N) (kgf): - IS 1969 (Part 1))	-	2700.00	Testing Charge-2200.00 Specimen/Conditioning Charge - 500.00
5.2 Table 1(Breaking strength of bottom seam (Ravelled strip method), Min, N) (kgf) - IS 9030)	-	1600.00	Testing Charge-1100.00 Specimen/Conditioning Charge - 500.00
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0.00	Breaking Strength & elongation have single Charge.
5.2 Table 1(Drop impact strength)	-	1100.00	-
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,a) For UV stabilized sacks)	-	1200.00	-
5.2 Table 1(Ends per dm)	-	500.00	-
5.2 Table 1(Dimensions)	-	2500	-
5.1(Mass of Bale)	-	0.00	ALREADY TEST CHARGE TAKEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
5.2 Table 1(Dimensions)	-	0.00	ALREADY TEST CHARGE TAKEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
5.2 Table 1(Dimensions)	-	0.00	ALREADY TEST CHARGE TAKEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
5.2 Table 1(Dimensions)	-	0.00	ALREADY TEST CHARGE TAKEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
5.2 Table 1(Picks per dm)	-	0.00	ALREADY TEST CHARGE TAKEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
5.2 Table 1(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70mm1)] Min, N2) (kgf): - IS 1969 (Part 1))	-	0.00	ALREADY TEST CHARGE TAKEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
5.2 Table 1(Elongation at break of fabric (Ravelled strip method), percent : IS 1969 (Part 1))	-	0.00	ALREADY TEST CHARGE TAKEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
(Clauses 4.2, 5.1, 5.2, 5.3 and 5.4) Table 1 (Ash Content ,b) For non- UV stabilized sacks)	-	0.00	ALREADY TEST CHARGE TAKEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
4.6(Capacity)	-	500.00	-
4.3.1(Bottom Seam)	-	500.00	-
4.3(Sacks)	-	0.00	ALREADY TEST CHARGE TAKEN ABOVE. THIS PARAMETER REPEATED IN DROPDOWN.
4.2,5.1,5.2,5.3,5.4(Breaking strenght after U.V. Exposure (Warp/Weft))	-	2200.00	-
4.2,5.1,5.2,5.3,5.4,(UV Resistance (192 hrs)(100 x 65+92x40))	-	10180	-
4.2(Linear Density)	-	700	-
4.2(Width of tape)	-	500.00	-

24 Apr, 2027

-
-

11143

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 2745 (1983)

Specification for non - Metal helmet for firemen and civil defence personnel (Second Revision)

All Type

17200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3(Shell, Protective padding, Retention System & Neck protector)	-	2500	-
Cl 4.1(Size Of Helmet)	-	1000	-
Cl 5( Shell, Protective Padding, Brim, Head band, Chin Strap, Cradle, Neck Protector & Visor)	-	4500	-
Cl 6(Workmanship & Finish)	-	1500	-
Cl 7(Mass)	-	500	-
Cl 9(Shock absorption test, Penitration resistance, Strength of Retention system, Electrical resistance, Water Absorption & Flammability resistance)	-	7200	-
Cl 3(Shell, Protective padding, Retention System & Neck protector)	-	2500	-
Cl 4.1(Size Of Helmet)	-	1000	-
Cl 5( Shell, Protective Padding, Brim, Head band, Chin Strap, Cradle, Neck Protector & Visor)	-	4500	-
Cl 6(Workmanship & Finish)	-	1500	-
Cl 7(Mass)	-	500	-
Cl 9(Shock absorption test, Penitration resistance, Strength of Retention system, Electrical resistance, Water Absorption & Flammability resistance)	-	7200	For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS)

-
-

11144

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 9562 (1980)

Specification for non - Metal helmet for police force

All Type

16400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 3(Shell, Protective padding & Retention System)	-	2500	-
Cl 4.1(Size Of Helmet)	-	1000	-
Cl 5( Shell, Protective Padding, Brim, Head band, Chin Strap, Cradle, Neck Protector & Visor)	-	4500	-
Cl 6(Workmanship & Finish)	-	700	-
Cl 7(Mass)	-	500	-
Cl 9(Shock absorption test, Penitration resistance, Strength of Retention system, Rigidity test, Water Absorption, Flammability resistance & Firing Test)	-	7200	-
Cl 3(Shell, Protective padding & Retention System)	-	2500	-
Cl 4.1(Size Of Helmet)	-	1000	-
Cl 5( Shell, Protective Padding, Brim, Head band, Chin Strap, Cradle, Neck Protector & Visor)	-	4500	-
Cl 6(Workmanship & Finish)	-	700	-
Cl 7(Mass)	-	500	-
Cl 9(Shock absorption test, Penitration resistance, Strength of Retention system, Rigidity test, Water Absorption, Flammability resistance & Firing Test)	-	7200	For BIS samples: 1.5 times of BIS testing charges (10% discount to BIS)

-
Cl 9 (Shock absorption test, Penetration resistance, Strength of Retention system, Rigidity test, Water Absorption, Flammability resistance & Firing Test)

11145

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 9103 (1999)

Specification for Concrete Admixtures -

All Type

30200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 9, Table- 2(Dry material content )	-	1000	-
Clause 9, Table- 2(Ash content)	-	750	-
Clause 9, Table- 2(Relative density)	-	750	-
Clause 9, Table- 2(Chloride ion content)	-	1200	-
Clause 9, Table- 2( pH)	-	500	-
Clause 9, Table- 2(Dry material content )	-	1000	-
Clause 9, Table- 2(Ash content)	-	750	-
Clause 9, Table- 2(Relative density)	-	750	-
Clause 9, Table- 2(Chloride ion content)	-	1200	-
Clause 9, Table- 2( pH)	-	500	-
Cl 4, Table 1A(Slump)	-	2500	-
Cl 4, Table 1 B(Flow, Loss of workability on satnding, Minimum compressive strength ( 7 Days,28 Days, 6 Month and 1 Year))	-	5500	-
Cl 4, Table 1A(Water Content, percent of control sample, Max)	-	2000	-
Cl 4, Table 1 B(Flow)	-	5500	-
Cl 4, Table 1A(Time of setting, allowable deviation from control sample hours)	-	3000	-
Cl 4, Table 1A(Compressive strength, percent of control sample, Min)	-	5500	-
Cl 4, Table 1A(Flexural strength, percent of control sample, Min)	-	4000	-
Cl 4, Table 1A(Length change, percent increase over control sample, Max)	-	4000	-
Cl 4, Table 1A(Bleeding, percent increase over control sample, Max)	-	4000	-
Cl 4, Table 1A(Loss of workability)	-	3500	-
Cl 4, Table 1A(Air content (%), Max, over control)	-	2500	-
Cl 4, Table 1 B(Loss of workability on standing)	-	3500	-
Cl 4, Table 1 B(Minimum compressive strength ( 7 Days,28 Days, 6 Month and 1 Year))	-	5500	-
Clause 4, Table 1B, SI no. (iii) (1 year minimum compressive strength, percent of control mix concrete)	-	0	-
Clause 4, Table 1B, SI no. (iii) (6 months minimum compressive strength, percent of control mix concrete)	-	0	-
Clause 4, Table 1B, SI no. (iii) (28 days minimum compressive strength, percent of control mix concrete)	-	0	-
Clause 4, Table 1B, SI no. (iii) (7 days minimum compressive strength, percent of control mix concrete)	-	0	-
Clause 4, Table 1A, SI no. (v) (28 days flexural strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (v) (7 days flexural strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (v) (3 days flexural strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (1 year compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (6 months compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (28 days compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (7 days compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (3 days compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iv) (1 day compressive strength, percent of control sample)	-	0	-
Clause 4, Table 1A, SI no. (iii) (Final time of setting allowable deviation from control sample)	-	0	-
Clause 4, Table 1A, SI no. (iii) (Initial time of setting allowable deviation from control sample)	-	0	-
Cl 9 Table 2(Dry material content ( a-For liquid admixture, b- For solid admixture), Ash content, Relative density, Chloride ion content, pH)	-	0	-

-
-

11146

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 12171 (2019)

Cotton bales – Specification (third revision)

2900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.3(Moisture Content)	-	500	-
5.2.1(Dimensions)	-	200	-
5.2.2(Mass (Weight))	-	200	-
5.2.3.1(a) Cotton fabric)	-	200	-
5.2.3.1(b) Baling hoops)	-	400	-
5.2.3.1(c) Cotton twine)	-	1400	-
5.1.4(Strength of Fibre)	-	0	-

14 Dec, 2026

-
-

11147

The Synthetic and Art Silk Mills' Research Association (SASMIRA), MUMBAI

7175004

IS 16089 (2013)

Jute agro-textile – Sapling bags for growth of seedling/ sapling – Specification

2200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4, Table 1, (i)(Mass, g/m², Min)	-	200	-
Clause 4, Table 1, (ii)(Thickness, mm)	-	200	-
Clause 4, Table 1, (iii)(Open area, percent)	-	0	-
Clause 4, Table 1, (iv) a(Threads/dm, Warp)	-	200	-
Clause 4, Table 1, (iv) b(Threads/dm, Weft)	-	0	-
Clause 4, Table 1, (v)(Width of Hessian fabric, cm)	-	200	-
Clause 4, Table 1, (vi)(Length and width of sapling bags, cm, Min)	-	400	-
Clause 4, Table 1, (vii)(Water holding capacity, percent)	-	500	-
Clause 4, Table 1, (viii) a(Tensile strength, kN/m, Warp)	-	500	-
Clause 4, Table 1, (viii) b(Tensile strength, kN/m, Weft)	-	0	-

14 Dec, 2026

-
-

11148

BIS, Central Laboratory (CL)

None

IS 3521 : Part 2 (2021)

Personal Fall Arrest Systems Specification Part 2 Lanyards and Energy Absorbers

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2.6 (Static strength)	-
4.3.5 (Dynamic performance)	-
5.2.4 (Corrosion resistance)	-
6.2 (Marking)	-
4.2.4 (Fittings)	-

-
Excluding Test Facility only for clauses 4.1, 4.2, 4.3

11149

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 16098 Part 2 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

57450.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table -1 Cl. No. 5.1, i)(Base Density)	-	500.00	-
Table -1 Cl. No. 5.1, ii)(Melt Flow Rate (MFR) at (190ºC, 5kg load))	-	1100.00	-
Table -1 Cl. No. 5.1, iii)(Thermal Stability (Oxidation Induction Test, OIT) at 200ºC)	-	2200.00	-
" 5.1 Table-2 ", i)(Resistance to Internal Pressure 165hrs)	-	4800.00	-
" 5.1 Table-2 ", ii)(Resistance to Internal Pressure 1000hrs)	-	11000.00	-
6.3.3(Out Side Diameter)	-	1000.00	-
7.1(Appearance)	-	1000.00	-
7.2 Table-6 (i)(Resistance to Heating oven test at (110±2ºC for 30 minute))	-	1100.00	-
9 Table-12 (i)(Tightness of elastomeric ring seal Joint)	-	1000.00	-
8.1.1 Table-10 (i)(Ring Stiffness)	-	0.00	Test Charge for this parameter taken above.
8.1.1 Table-10 (ii)(Impact Strength at (0±1 ºC))	-	0.00	Test Charge for this parameter taken above.
8.1.1, 8.1.2 Table-10 (iii)(Ring flexibility 30% of dem)	-	0.00	Test Charge for this parameter taken above.
6.3.1 & Table-5(Dim (min.) E4 (min) E5 (min.) Socket Length)	-	0.00	Test Charge for this parameter taken above.
6.3.2(Length of Pipe)	-	0.0	Test Charge for this parameter taken above.
6.3.5.1.1(Ring Stiffness of Spigot + socket)	-	0.00	Test Charge for this parameter taken above.
"6.3.5.1.5 Table-5 "(Socket thickness Avg. (min.) Avg.)	-	0.00	Test Charge for this parameter taken above.
6.3.5.2(Wall Thickness(e4 min))	-	0.00	Test Charge for this parameter taken above.
9 Table 12 (ii)(Water tightness)	-	0.00	Test Charge for this parameter taken above.
7.1.1(Color of Finished Pipes)	-	0.00	Test Charge for this parameter taken above.
6.3.5.2("Construction Height of body wall(ec) Wall Thickness (emin) ")	-	0.00	Test Charge for this parameter taken above.

24 Apr, 2027

-
Exclusion: Cl 8.1.1 Table-10 (iv) (Creep ratio) Cl 9 Table- 12 (iii) (Resistance to combined temperature cycling and external loading)

11150

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 16098 Part 1 (2013)

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A

60950.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2 Table 1(Composition of the material- Resistance to internal hydrostatic Pipe material (1) 1 000 IS 12235 No seepage, cracking, pressure at 60ºC)	-	11500.00	Resistance to Internal Hydrostatic Pressure at 60 °C/1000h. (pipes & Fittings) = 11000 Specimen/Conditioning Charge= 500
6.1(Wall Construction Designated as Type A)	-	500.00	-
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	500.00	-
7.1(Appearance)	-	500.00	-
7.2(Colour )	-	0.00	Appearance and color have single charge.
7.3(Vicat softening temperature of pipes)	-	1100.00	-
7.4(Resistance to Dichloromethane)	-	1000.00	-
7.5(longitudinal reversion)	-	1200.00	Test Charge= 700.00 Specimen/Conditioning Charge- 500.00
8.1(Appearance and colour)	-	500.00	-
8.2(Vicat softening temperature of fittings)	-	1100.00	-
8.3(Effect of Heating (Stress Relief Test))	-	1200.00	Test Charge= 700.00 Specimen Charge= 500.00
9.1(Ring stiffness)	-	1600.00	Test Charge= 1100.00 Specimen Charge= 500.00
9.2(Resistance to external blows at o C)	-	1600.00	Test Charge= 1100.00 Specimen Charge= 500.00
9.3(Ring flexibility)	-	1100.00	-
10.1(Impact Strength of Injection Moulded and Fabricated Fittings)	-	1100.00	-
12.1(Elastomeric Sealing Ring Joints)	-	1350.00	test Charge= 850.00 specimen Charge = 500.00
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vaccum ))	-	2500.00	Internal Negative Hydrostatic Pressure test (internal Vacuum) for Elastomeric Sealing ring joint = 2000.00 Specimen Charge= 500.00
6.3.2(Dimension of Pipes and Fittings Lengths of Pipe)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
6.3.3(Dimension of Pipes and Fittings Diameters of Pipes and Spigots of Pipes orFittings)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
7.0(Physical characteristics for pipes and fittings Appearance)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
7.1.1(Physical characteristics for pipes and fittings Colour of Finished Pipes)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
7.2(Physical characteristics for pipes and fittings )	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
7.3(Physical characteristics for pipes and fittings )	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
8.1.1(Mechanical Characteristics of Pipes General)	-	0.00	-
8.1.1(Mechanical Characteristics of Pipes General)	-	0.00	-
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
8.1.2 (b)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
8.1.2 (c)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
8.1.2 (d)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
8.1.2 (e)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
8.2.1(Mechanical Characteristics of Fittings General)	-	0.00	-
8.2.1(Mechanical Characteristics of Fittings General)	-	0.00	-
8.2.2(Mechanical Characteristics of Fittings)	-	0.00	-
8.3(Joints)	-	0.00	-
9 (Table 12)(Performance Requirements)	-	0.00	-
9 (Table 12)(Performance Requirements)	-	0.00	-
9 (Table 12)(Performance Requirements)	-	0.00	-
11.1(Marking General)	-	0.00	-
11.2.1(Minimum Required Marking Pipes)	-	0.00	-
11.2.1(Minimum Required Marking Pipes)	-	0.00	-
11.2.1(Minimum Required Marking Pipes)	-	0.00	-
11.2.1(Minimum Required Marking Pipes)	-	0.00	-
11.2.1(Minimum Required Marking Pipes)	-	0.00	-
11.2.2(Minimum Required Marking Fittings)	-	0.00	-
11.2.2(Minimum Required Marking Fittings)	-	0.00	-
11.2.2(Minimum Required Marking Fittings)	-	0.00	-
11.2.2(Minimum Required Marking Fittings)	-	0.00	-
11.2.2(Minimum Required Marking Fittings)	-	0.00	-
11.2.2(Minimum Required Marking Fittings)	-	0.00	-
5.0(Composition of the material)	-	0.00	-
5.1(Composition of the material)	-	0.00	-
5.3(Composition of the material)	-	0.00	-
5.4(Composition of the material)	-	0.00	-
6.0(DESIGNATION OF WALL CONSTRUCTIONS AND EXAMPLES OF TYPICAL JOINTING METHODS )	-	0.00	-
6.2(Deswignation)	-	0.00	-
6.3(Dimensions of pipes and fittings)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
6.3.1 Table 2(Mean outside diameter)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
6.3.2 Table 3(Wall thickness)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
6.3.3 Fig 2(Length of pipe)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
6.3.4,Table 4,5(Dimensions of Integral sckets and spigot ends)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
6.3.4.1(Wall thickness of sockets)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
6.3.4.2(Fabricated fittings)	-	0.00	-
6.3.4.3(Rotational moulded fittings)	-	0.00	-
6.3.4.4(Type of fittings)	-	0.00	-
7.0(Physical characteristics of pipes)	-	0.00	-
8.0(Physical characteristics of fittings)	-	0.00	-
9.0(Mechanical characteristics ofpipes)	-	0.00	-
10.0(Mechanical Characteristics of fittings)	-	0.00	-
11.0(Joints)	-	0.00	-
11.1(Elastomeric Sealing Rings)	-	0.00	-
11.2(Solvent cement)	-	0.00	-
12.0(PERFORMANCE REQUIREMENTS)	-	0.00	-
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water pressure))	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
12.2(Solvent cement joints)	-	0.00	-
12.2.1(Tightness of Solvent cemented Ring Joints )	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
12.2.2(Tightness of Solvent cemented Ring Joints (Vaccum pressure))	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
6.3.1(Dimension of Pipes and Fittings Diameter of pipe)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
6.3.2(Dimension of Pipes and Fittings Lengths of Pipe)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
6.3.3(Dimension of Pipes and Fittings Diameters of Pipes and Spigots of Pipes orFittings)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
7.0(Physical characteristics for pipes and fittings Appearance)	-	0.00	-
7.1.1(Physical characteristics for pipes and fittings Colour of Finished Pipes)	-	0.00	-
7.2(Physical characteristics for pipes and fittings )	-	0.00	-
7.3(Physical characteristics for pipes and fittings )	-	0.00	-
8.1.1(Mechanical Characteristics of Pipes General)	-	0.00	-
8.1.1(Mechanical Characteristics of Pipes General)	-	0.00	-
8.1.2 (a)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
8.1.2 (b)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
8.1.2 (c)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
8.1.2 (d)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
8.1.2 (e)(Mechanical Characteristics of Pipes Ring Flexibility)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
8.2.1(Mechanical Characteristics of Fittings General)	-	0.00	-
8.2.1(Mechanical Characteristics of Fittings General)	-	0.00	-
8.3(Joints)	-	0.00	-
9 (Table 12)(Performance Requirements)	-	0.00	-
9 (Table 12)(Performance Requirements)	-	0.00	-
9 (Table 12)(Performance Requirements)	-	0.00	-
11.1(Marking General)	-	0.00	-
11.2.1(Minimum Required Marking Pipes)	-	0.00	-
11.2.1(Minimum Required Marking Pipes)	-	0.00	-
11.2.1(Minimum Required Marking Pipes)	-	0.00	-
11.2.1(Minimum Required Marking Pipes)	-	0.00	-
11.2.1(Minimum Required Marking Pipes)	-	0.00	-
11.2.2(Minimum Required Marking Fittings)	-	0.00	-
11.2.2(Minimum Required Marking Fittings)	-	0.00	-
11.2.2(Minimum Required Marking Fittings)	-	0.00	-
11.2.2(Minimum Required Marking Fittings)	-	0.00	-
11.2.2(Minimum Required Marking Fittings)	-	0.00	-
11.2.2(Minimum Required Marking Fittings)	-	0.00	-
6.3.4 Table 4 & 5(Dimensions of Integral Socket and spigot ends)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
6.3.4 Table 4 & 5(Outside diameter (dsm) min)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
6.3.4 Table 4 & 5(C max)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
7.1.1(Colour of finished pipes)	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
12.1.1(Tightness of Elastomeric Sealing Ring Joints (Water Pressure))	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
12.1.2(Tightness of Elastomeric Sealing Ring Joints (Internal Vacuum))	-	0.00	ALREADY TEST CHARGE TAKEN FOR ABOVE PARAMETER.
8.2.2(Mechanical Characteristics of Fittings)	-	0.00	-

24 Apr, 2027

-
Exclusion: Cl 9.4 (Creep ratio) Cl 12.1.3 (Resistance to Combined Temperature Cycling and External Loading)

11151

BIS, Eastern Regional Laboratory (ERL)

None

IS 12254 (2021)

POLYVINYLCHLORIDE PVC INDUSTRIAL BOOTS - SPECIFICATION Second Revision

For all type and variety

20400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.4.8.1 (Conductive Footwear)	-
Cl.6.1 (Volatility- IS 12240 (Part 4))	-
Cl.6.2 (Lead Content-IS 12240 (Part 5),)	-
Table 1 as per IS 17011 2018 (pH)	-
Table 1 as per IS 17011 2018 (Phthalates (each individual phthalate))	-
Table 1 as per IS 17011 2018 (Nickel, on skin contact)	-
Table 1 as per IS 17011 2018 (Allergenic and carcinogenic disperse dyes)	-
Table 1 as per IS 17011 2018 (Aromatic amines released from Azo dyes (each individual amine))	-
Table 1 as per IS 17011 2018 (Chromium (VI))	-
5.2 (Size)	-
5.3 (Height)	-
5.4.2 (Ergonomic feature)	-
5.4.3 (Sole bond)	-
5.4.5 (Leak proofness)	-
5.4.6.2 (Internal length of toecaps)	-
5.4.6.4 (Impact resistance)	-
5.4.6.5 (Compression resistance)	-
5.4.7 (Colour)	-
5.4.8.3.2 (Penetration resistance)	-
5.4.8.4 (Cut resistance)	-
5.4.8.6 (Outsole resistance to fuel oil)	-
5.5.1 (Upper material)	-
5.5.2 (Upper tensile strength)	-
5.5.3 (Upper flexing)	-
5.5.4 (Upper Hardness)	-
5.6.1 (Lining material)	-
5.6.2 (Lining Tear strength)	-
5.6.3 (Lining abrasion)	-
5.6.4 (Lining adhesion with upper)	-
5.7.1 (Insole material)	-
5.7.2 (Insole abrasion)	-
5.7.3 (Water absorption and desorption)	-
5.9.1 (Insock material)	-
5.9.2 (Inscok abrasion resistance)	-
5.9.3 (Insock water absorption and desorption)	-
5.11.1 (Outsole material)	-
5.11.2 (Outsole density)	-
5.11.3 (Outsole Interlayer bond)	-
5.11.4 (Outsole tear)	-
5.11.5 (Outsole Abrasion)	-
5.11.6 (Outsole hardness)	-
5.11.7 (Outsole flexing)	-
Cl..4.1 of IS 17011 (Phthallate: DEHP)	-
Cl..4.1 of IS 17011 (Phthallate: DIBP)	-
Cl..4.1 of IS 17011 (Phthallate: DOP)	-
Cl..4.1 of IS 17011 (Phthallate: DBP)	-
Cl..4.1 of IS 17011 (Phthallate: BBP)	-
Cl..4.1 of IS 17011 (Phthallate: DINP)	-
Cl..4.1 of IS 17011 (Phthallate: DIDP)	-
Cl..4.1 of IS 17011 (Organotin: Dibutyltin)	-
Cl..4.1 of IS 17011 (Organotin: Dibutyltin Dichloride)	-
Cl..4.1 of IS 17011 (Organotin: Dioctyltin)	-
Cl..4.1 of IS 17011 (Organotin: Monobutyltin)	-
Cl..4.1 of IS 17011 (Organotin: Tributyltin)	-
Cl..4.1 of IS 17011 (Organotin: Triphenyltin)	-
Cl..4.1 of IS 17011 (Organotin: Monoctyltin)	-
Cl..4.1 of IS 17011 (Organotin: Bis (tributyltin) oxide)	-
Cl.4.1 (Table B-1 Sl I) (Aromatic Amines: 4-aminobiphenyl)	-
Cl.4.1 (Table B-1 Sl II) (Aromatic Amines: Benzidine)	-
Cl.4.1 (Table B-1 Sl III) (Aromatic Amines: 4-chloro-o-toluidine)	-
Cl.4.1 (Table B-1 Sl IV) (Aromatic Amines: 2-naphthylamine)	-
Cl.4.1 (Table B-1 Sl V) (Aromatic Amines :o-aminoazotoluene)	-
Cl.4.1 (Table B-1 Sl VI) (Aromatic Amines: 2-amino-4-nitrotoluenem)	-
Cl.4.1 (Table B-1 Sl VII) (Aromatic Amines: p-chloroaniline)	-
Cl.4.1 (Table B-1 Sl VIII) (Aromatic Amines: 2,4-diaminoanisole)	-
Cl.4.1 (Table B-1 Sl IX) (Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-
Cl.4.1 (Table B-1 Sl X) (Aromatic Amines : 3,3’-dichlorobenzidine)	-
Cl.4.1 (Table B-1 Sl XI) (Aromatic Amines : 3,3’-dimethoxybenzidine)	-
Cl.4.1 (Table B-1 Sl XII) (Aromatic Amines : 3,3’-dimethylbenzidine)	-
Cl.4.1 (Table B-1 Sl XIII) (Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-
Cl.4.1 (Table B-1 Sl XIV) (Aromatic Amines : p-cresidine)	-
Cl.4.1 (Table B-1 Sl XV) (Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-
Cl.4.1 (Table B-1 Sl XVI) (Aromatic Amines :4,4’-oxydianiline)	-
Cl.4.1 (Table B-1 Sl XVII) (Aromatic Amines:4,4’-thiodianiline)	-
Cl.4.1 (Table B-1 Sl XVIII) (Aromatic Amines :o-toluidine:)	-
Cl.4.1 (Table B-1 Sl XIX) (Aromatic Amines: 2,4-toluylendiamine)	-
Cl.4.1 (Table B-1 Sl XX) (Aromatic Amines: 2,4,5-trimethylaniline)	-
Cl.4.1 (Table B-1 Sl XXI) (Aromatic Amines :2,4-dimethylaniline)	-
Cl.4.1 (Table B-1 Sl XXII) (Aromatic Amines: 2,6-dimethylaniline:)	-
Cl.4.1 (Table B-1 Sl XXIII) (Aromatic Amines :2-methoxyaniline)	-
Cl.4.1 (Table B-1 Sl XXIV) (Aromatic Amines :4-aminoazobenzene)	-
Cl. No.4.1,Table 1 of IS 17011 (Formaldehyde (free or released by partial hydrolysis))	-
Cl. 4.1 of IS 17011 (DMFU)	-
Cl. No.4.1,Table 1 of IS 17011 (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-
Cl. No.4.1,Table 1 of IS 17011 (Allergenic and Carcinogenic Disperse Dyes)	-
Cl.No5.3.6(IS 17011),Table 1(ix) (PCP-TeCP-TriCP polychorophenols)	-

-
Chem- Complete, Material declaration required for Innocuousness test. Mech- Except Cold Flex Resistance as per Cl. 5.5.5. Classification, design and protection level to be declared. Separate raw material for upper, lining, insole to be provided.

11152

International Testing Centre, MSME Technology Development Centre, Meerut

8177804

IS 10702 (2023)

Hawai Chappal-Specification

39000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Material)	-	1000	-
4.2(Length)	-	300	-
4.3(Thickness)	-	300	-
4.4 , Table No. 1 , i)(Density)	-	300	-
4.4 , Table No. 1 , ii)(2Compression set at constant stress)	-	500	-
4.4 , Table No. 1 , iii)(3Split tear strength)	-	500	-
4.4 , Table No. 1 , iv)("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber")	-	500	-
4.4 , Table No. 1 , v)(5Abrasion resistance at applied force)	-	500	-
4.4 , Table No. 1 , vi)(Flexing resistance: Maximum cut growth at 50 000 flexes)	-	500	-
4.4 , Table No. 1 , vii)(7 Hydrolysis resistance, Maximum cut growth at 50 000 flexes)	-	1500	-
4.4 , Table No . 2 , i)(Density , Solid strap, Cellular strap)	-	300	-
4.4 , Table No . 2 , ii)("Breaking strength , Strap to strap and Toe portion to strap , Elongation at break")	-	500	-
4.4 , Table No . 2 , iii)(Minimum cross section of the stud)	-	300	-
4.4 , Table No . 3 , i)(Toe post attachment strength)	-	500	-
4.4 , Table No . 3 , ii)(Attachment strength of rear strap)	-	500	-
4.4 , Table No . 3 , iii)(Inter layer bond strength)	-	500	-
5(CHEMICAL REQUIREMENT FOR HAWAI CHAPPAL)	-	35000	-
Cl. No.5.1,Table no.1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	8000	-
Cl. No.5.1,Table no.1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	8000	-
Cl. No.5.1,Table no.1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	8000	-
Cl. No.5.1,Table no.1 of IS 17011(iv)(Chromium (VI))	-	1000	-
Cl. No.5.1,Table no.1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	5000	-
Cl. No.5.1,Table no.1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	800	-
Cl. No.5.1,Table no.1 of IS 17011(vii)(Formaldehyde)	-	800	-
Cl. No.5.1,Table no.1 of IS 17011(viii)(Organotin compounds)	-	4500	-
Cl. No.5.1,Table no.1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	4500	-
Cl. No.5.1,Table no.1 of IS 17011(x)(pH)	-	500	-
Cl. No.5.1,Table no.1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	4500	-
Cl. No.5.1,Table no.1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	800	-
Cl.No. 5.2(lead content)	-	1000	-
Clause 4.1 - 4.1.1(Bottom Material)	-	1500	-
Clause 4.1 - 4.1.2(Strap Material)	-	1000	-
Clause 4.1 - 4.1.3(Material)	-	1000	-
Clause 4.1 - 4.1.4(Material)	-	1000	-
Clause 4.2(Material)	-	1000	-
Clause 4.3 - 4.3.1(Thickness)	-	300	-
Clause 4.3 - 4.3.2(Thickness)	-	300	-
Clause 4.4 Table 1 -i)(Density, g/cm3, Min)	-	300	-
Clause 4.4 Table 1 -iii)(Split tear strength, kg, Min)	-	500	-
Clause 4.4 Table 1 -iv) - a("Shrinkage at 50 ºC ± 1 ºC for 24 h for polymeric material, percent, Max")	-	500	-
Clause 4.4 Table 1 -iv) - b(Shrinkage at 100 ºC ± 1 ºC for 1 h for rubber, percent, Max)	-	500	-
Clause 4.4 Table 1 -v)(Abrasion resistance at applied force 5 N)	-	800	-
Clause 4.4 Table 2 -i) - a("Density, g/cm3 Solid strap ")	-	300	-
Clause 4.4 Table 2 -i) - b(Density, g/cm3 Cellular strap)	-	300	-
Clause 4.4 Table 2 -ii) - a - 1("Breaking strength, kgf, Min Strap to strap(Solid Strap)")	-	500	-
Clause 4.4 Table 2 -ii) - a - 2("Breaking strength, kgf, Min Strap to strap(Cellular Strap)")	-	500	-
Clause 4.4 Table 2 -ii) - a - 3("Breaking strength, kgf, Min Toe portion to strap(Solid Strap)")	-	500	-
Clause 4.4 Table 2 -ii) - a - 4("Breaking strength, kgf, Min Toe portion to strap(Cellular Strap)")	-	500	-
Clause 4.4 Table 2 -ii) - b - 1("Elongation at break, percent (Applicable to strap to strap (V shape) Solid Strap")	-	500	-
Clause 4.4 Table 2 -ii) - b - 2("Elongation at break, percent (Applicable to strap to strap (V shape) Cellular Strap")	-	500	-
Clause 4.4 Table 2 -iii) - a("Minimum cross section of the stud, mm, Size 1 to 13 (Adult)")	-	500	-
Clause 4.4 Table 2 -iii) - b("Minimum cross section of the stud, mm, Size 3 to 13 (Children)")	-	500	-
Clause 4.4 Table 2 -iv) - a("Stud bolt, mm Diameter/edge to edge length")	-	300	-
Clause 4.4 Table 2 -iv) - b("Stud bolt, mm Thickness")	-	300	-
Clause 4.4 Table 3 -i)("Toe post attachment strength, N, Min")	-	500	-
Clause 4.4 Table 3 -ii)("Attachment strength of rear strap, N, Min")	-	500	-
Clause 4.4 Table 3 -iii)("Inter layer bond strength, N/mm, Min")	-	500	-

15 Apr, 2027

-
-

11153

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 16205 : Part 24 (2017)

Conduit Systems for Cable Management part 24 Particular Requirements Conduit Systems Buried Under Ground

20350.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.1(Classification - Resistance to Compression)	-	1600.00	Test Charge- 1100.00 specimen Charge- 500.00
6.1.2(Classification - Resistance to Impact)	-	1600.00	Test Charge- 1100.00 specimen Charge- 500.00
6.1.3(Classification - Resistance to Bending)	-	2000.00	-
6.5 of IS 16205 (Part 1) : 2017(Classification - According to Resistance to Flame Propogation)	-	3650.00	Spread of Fire 750 Spread of Fire Glow Wire 2900
14.0(External Influences)	-	10000.00	-
15.0(Electromagnetic Compatibility)	-	500.00	-
8 Table 101(Dimensions)	-	500.00	-
9.1 of IS 16205 (Part 1) : 2017(Construction)	-	500	-
6.1.4 of IS 16205 (Part 1) : 2017(Classification - Tensile Strength)	-	0.00	-
6.1.5 of IS 16205 (Part 1) : 2017(Classification - Suspended Load Capacity)	-	0.00	-
6.3 of IS 16205 (Part 1) : 2017(Classification - According to Electrical Characteristics)	-	0.00	-
6.4 of IS 16205 (Part 1) : 2017(Classification - According to Resistance to External Influences)	-	0.00	-
7.1(Marking and Documentation)	-	0.00	-
7.1.2(Marking and Documentation)	-	0.00	-
7.1.3(Marking and Documentation)	-	0.00	-
7.1.101(Marking and Documentation)	-	0.00	-
7.2(Marking and Documentation)	-	0.00	-
7.5 of IS 16205 (Part 1) : 2017(Marking and Documentation)	-	0.00	-
7.6 of IS 16205 (Part 1) : 2017(Marking and Documentation)	-	0.00	-
7.101(Marking and Documentation)	-	0.00	-
7.102(Marking and Documentation)	-	0.00	-
8 Table 101(Dimensions)	-	0.00	-
9.2 of IS 16205 (Part 1) : 2017(Construction)	-	0.00	-
9.4 of IS 16205 (Part 1) : 2017(Construction)	-	0.00	-
9.5 of IS 16205 (Part 1) : 2017(Construction)	-	0.00	-
9.6 of IS 16205 (Part 1) : 2017(Construction)	-	0.00	-
10.1(Mechanical Strength)	-	0.00	-
10.2(Compression Test)	-	0.00	-
10.3(Impact Test)	-	0.00	-
10.4(Bending Test)	-	0.00	-
13.1.3(Spread of fire)	-	0.00	-
13.1.3.1(Spread of fire)	-	0.00	-
13.1.3.2(Spread of fire)	-	0.00	-
14.2 of IS 16205 (Part 1) : 2017(Resistance against corrosion)	-	0.00	-
15(Mech)(Electromagnetic Compatibility)	-	0.00	-
14.2 of IS 16205 (Part 1) : 2017(Mech)(Resistance against corrosion)	-	0.00	-
14(Mech)(External Influences)	-	0.00	-
13.1.3.2(Mech)(Spread of fire)	-	0.00	-
13.1.3.1(Mech)(Spread of fire)	-	0.00	-
10.4(Mech)(Bending Test)	-	0.00	-
10.3(Mech)(Impact Test)	-	0.00	-
10.2(Mech)(Compression Test)	-	0.00	-
10.1(Mech)(Mechanical Strength )	-	0.00	-
9.6 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	0.00	-
9.5 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	0.00	-
9.4 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	0.00	-
9.2 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	0.00	-
9.1 of IS 16205 (Part 1) : 2017(Mech)(Construction)	-	0.00	-
8 Table 101(Mech)(Dimensions)	-	0.00	-
8 Table 101(Mech)(Dimensions)	-	0.00	-
7.102(Mech)(Marking and Documentation)	-	0.00	-
7.5 of IS 16205 (Part 1) : 2017(Mech)(Marking and Documentation)	-	0.00	-
7.2(Mech)(Marking and Documentation)	-	0.00	-
7.1.101(Mech)(Marking and Documentation)	-	0.00	-
7.1.3(Mech)(Marking and Documentation)	-	0.00	-
7.1.2(Mech)(Marking and Documentation)	-	0.00	-
7.1(Mech)(Marking and Documentation)	-	0.00	-
6.5 of IS 16205 (Part 1) : 2017(Mech)(Classification - According to Resistance to Flame Propogation)	-	0.00	-
6.4 of IS 16205 (Part 1) : 2017(Mech)(Classification - According to Resistance to External Influences)	-	0.00	-
6.3 of IS 16205 (Part 1) : 2017(Mech)(Classification - According to Electrical Characteristics)	-	0.00	-
6.1.5 of IS 16205 (Part 1) : 2017(Mech)(Classification - Suspended Load Capacity)	-	0.00	-
6.1.4 of IS 16205 (Part 1) : 2017(Mech)(Classification - Tensile Strength)	-	0.00	-
6.1.3(Mech)(Classification - Resistance to Bending)	-	0.00	-
6.1.2(Mech)(Classification - Resistance to Impact)	-	0.00	-
6.1.1 (Mech)(Classification - Resistance to Compression)	-	0.00	-
13.1.3(Mech)(Spread of fire)	-	0.00	-
7.101(Mech)(Marking and Documentation)	-	0.00	-
7.6 of IS 16205 (Part 1) : 2017(Mech)(Marking and Documentation)	-	0.00	-

24 Apr, 2027

-
-

11154

BIS, Eastern Regional Laboratory (ERL)

None

IS 17043 (2018)

Derby shoes - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.5.5.1 (Electrical Properties Antistatic )	-
5.0 (Innocuosness test IS 17011)	-

-
Chem - Excluding Allergenic & Carcinogenic Dyes, Organotin Compounds, Polychlorophenols Mech- Tag retention (Cl 4.15.2), Pull out test of eyelet (Cl 4.14)

11155

BIS, Eastern Regional Laboratory (ERL)

None

IS 17012 (2018)

High ankle tactical boots with pu - Rubber sole - Specification

For all design and size

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.5.5 (Antistatic test)	-
5.0 (Innocuousness Test IS 17011)	-
4.2 (Design )	-
4.3.1 (Size)	-
4.3.2 (Weight)	-
4.4 (Height of upper )	-
4.5.1 (Construction)	-
4.5.2 (Ergonomic Feature)	-
4.5.3.1 (Upper/outsole bond strength)	-
4.5.3.2 (Interayer bond strength)	-
4.6.1 (Thickness )	-
4.6.2 (Tear Strength)	-
4.6.3 (Water Penetration and water absorption )	-
4.7.1 (Material vamp & Quarter)	-
4.7.3 (Tear Strength)	-
4.7.4 (Abrasion resistance )	-
4.7.5 (Water Vapour permeability & coefficient )	-
4.8 (Thickness Toe puff & counter stiffener)	-
4.9.1 (Thickness)	-
4.9.2 (Abrasion resistance )	-
4.9.3 (Water absorption & desorption percent)	-
4.10.2 (Abrasion resistance )	-
4.10.3 (Water absorption & desorption percent)	-
4.11.1 (Thickness )	-
4.11.2 (Tear Strength)	-
4.12.1 (Thickness )	-
4.12.2 (Tear Strength)	-
4.13 (Breaking Strength of thread )	-
4.14.2 (Thickness)	-
4.14.3 (Sole Density )	-
4.14.4 (Tear Strength)	-
4.14.5 (Abrasion resistance )	-
4.14.6 (Hardness (IRHD))	-
4.14.7 (Ageing test)	-
4.14.8 (Flexing resistance )	-
4.14.9 (Resistance to hot contact )	-
4.15 (D-ring & Hooks )	-
4.16.1 (Length of lace )	-
4.16.2 (Breaking Strength of lace )	-
4.5.4 (Slip Resitance)	-
Cl.4.1 (Table B-1 Sl I) (Aromatic Amines: 4-aminobiphenyl)	-
Cl.4.1 (Table B-1 Sl II) (Aromatic Amines: Benzidine)	-
Cl.4.1 (Table B-1 Sl III) (Aromatic Amines: 4-chloro-o-toluidine)	-
Cl.4.1 (Table B-1 Sl IV) (Aromatic Amines: 2-naphthylamine)	-
Cl.4.1 (Table B-1 Sl V) (Aromatic Amines :o-aminoazotoluene)	-
Cl.4.1 (Table B-1 Sl VI) (Aromatic Amines: 2-amino-4-nitrotoluenem)	-
Cl.4.1 (Table B-1 Sl VII) (Aromatic Amines: p-chloroaniline)	-
Cl.4.1 (Table B-1 Sl VIII) (Aromatic Amines: 2,4-diaminoanisole)	-
Cl.4.1 (Table B-1 Sl IX) (Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-
Cl.4.1 (Table B-1 Sl X) (Aromatic Amines : 3,3’-dichlorobenzidine)	-
Cl.4.1 (Table B-1 Sl XI) (Aromatic Amines : 3,3’-dimethoxybenzidine)	-
Cl.4.1 (Table B-1 Sl XII) (Aromatic Amines : 3,3’-dimethylbenzidine)	-
Cl.4.1 (Table B-1 Sl XIII) (Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-
Cl.4.1 (Table B-1 Sl XIV) (Aromatic Amines : p-cresidine)	-
Cl.4.1 (Table B-1 Sl XV) (Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-
Cl.4.1 (Table B-1 Sl XVI) (Aromatic Amines :4,4’-oxydianiline)	-
Cl.4.1 (Table B-1 Sl XVII) (Aromatic Amines:4,4’-thiodianiline)	-
Cl.4.1 (Table B-1 Sl XVIII) (Aromatic Amines :o-toluidine:)	-
Cl.4.1 (Table B-1 Sl XIX) (Aromatic Amines: 2,4-toluylendiamine)	-
Cl.4.1 (Table B-1 Sl XX) (Aromatic Amines: 2,4,5-trimethylaniline)	-
Cl.4.1 (Table B-1 Sl XXI) (Aromatic Amines :2,4-dimethylaniline)	-
Cl.4.1 (Table B-1 Sl XXII) (Aromatic Amines: 2,6-dimethylaniline:)	-
Cl.4.1 (Table B-1 Sl XXIII) (Aromatic Amines :2-methoxyaniline)	-
Cl.4.1 (Table B-1 Sl XXIV) (Aromatic Amines :4-aminoazobenzene)	-
Cl.4.1 (Table B-11) (PCP-TeCP-TriCP polychlorophenols)	-
Cl.1.4.1 of IS 17011 (DMFU)	-
Cl.1.4.1 of IS 17011 (Table B Sl I ) (Phthalate: DINP)	-
Cl.1.4.1 of IS 17011 (Table B Sl II ) (Phthalate:: DNOP)	-
Cl.1.4.1 of IS 17011 (Table B Sl III ) (Phthalate: DEHP)	-
Cl.1.4.1 of IS 17011 (Table B Sl IV ) (Phthalate: DIDP)	-
Cl.1.4.1 of IS 17011 (Table B Sl V) (Phthalate: BBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VI ) (Phthalate:DBP)	-
Cl.1.4.1 of IS 17011 (Table B Sl VII ) (Phthalate: DIBP)	-
Cl.4.1 (Annex-A Sl I ) (Organotin: Dibutyltin)	-
Cl.4.1 (Annex-A Sl II ) (Organotin: Dibutyltin Dichloride)	-
Cl.4.1 (Annex-A Sl III ) (Organotin: Dioctyltin)	-
Cl.4.1 (Annex-A Sl IV) (Organotin: Monobutyltin)	-
Cl.4.1 (Annex-A Sl V ) (Organotin: Tributyltin)	-
Cl.4.1 (Annex-A Sl VI) (Organotin: Triphenyltin)	-
Cl.4.1 (Annex-A Sl VII ) (Organotin: Monoctyltin)	-
Cl.4.1 (Annex-A Sl VIII) (Organotin: Bis (tributyltin) oxide)	-
Cl.1.4.1 of IS 17011 (pH)	-
Cl. No.8.6.1,Table 1 of IS 17011 (Chromium (VI))	-
Cl. No.8.6.1,Table 1 of IS 17011 (Formaldehyde (free or released by partial hydrolysis))	-
Cl. No.8.6.1,Table 1 of IS 17011 (Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-
Cl.8 - Table No 1 (Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-
Cl.4.1 (Table B-3) (Allergenic and Carcinogenic Disperse Dyes)	-

-
Mech Quantity:- 5 Pairs + Raw material of upper, Lining, Insole, Toe puff, Counter stiffener, closing thread, outsole, midsole, collar Chem- Material declaration required for Innocuousness test.

11156

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 446 (2017)

Rubber hoses, textile - Reinforced, for compressed air - Specification (Fifth Revision)

All Type

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.3(Cut Lengths)	-	300	-
5.2(Thickness of Cover)	-	300	-
5.2(Thickness of Lining)	-	300	-
5.1, Table-1(Internal Diameter)	-	300	-
7.2, Table 3(Low temperature Flexibility)	-	2000	-
7.2, Table 3(Flexibility at 23°C)	-	1500	-
7.2, Table 3(Ozone Resistance)	-	2500	-
7.2, Table 3(Adhesion between Components- Cover and Reinforcement)	-	1000	-
7.2, Table 3(Adhesion between Components- Reinforcement layers)	-	1000	-
7.2, Table 3(Adhesion between Components- Lining and Reinforcement)	-	1000	-
7.2, Table 3(Minimum Bursting Pressure for type 3)	-	2000	-
7.2, Table 3(Minimum Bursting Pressure for type 2)	-	2000	-
7.2, Table 3(Minimum Bursting Pressure for type 1)	-	2000	-
7.2, Table 3(Change in Diameeter at Maximum working Pressure)	-	2000	-
7.2, Table 3(Change in Length at Maximum working Pressure)	-	2000	-
7.2, Table 3(Proof Pressure at 23°C for type 3)	-	2000	-
7.2, Table 3(Proof Pressure at 23°C for type 2)	-	2000	-
7.2, Table 3(Proof Pressure at 23°C for type 1)	-	2000	-
7.1, Table 2(Resistance to Liquid , Increase in Volume (Class C only)-Cover)	-	750	-
7.1, Table 2(Resistance to Liquid , Increase in Volume (Class C only)-Lining)	-	750	-
7.1, Table 2(Resistance to Liquid , Increase in Volume (Class B only)-Lining)	-	750	-
7.1, Table 2(Accelerated Ageing for all types: Change in Elongation of Cover of its original value)	-	2000	-
7.1, Table 2(Accelerated Ageing for all types: Change in Elongation of Lining of its original value)	-	2000	-
7.1, Table 2(Accelerated Ageing for all types: Change in Tensile Strength of Cover of its original value)	-	2000	-
7.1, Table 2(Accelerated Ageing for all types: Change in Tensile Strength of Lining of its original value)	-	2000	-
7.1, Table 2(Elongation at Break of Cover of all types)	-	1000	-
7.1, Table 2(Elongation at Break of Lining of all types)	-	1000	-
7.1, Table 2(Tensile Strength of Cover)	-	1000	-
7.1, Table 2(Tensile Strength of Lining)	-	1000	-
6, Dimensions(Thickness of Cover of Type 3)	-	300	-
6, Dimensions(Thickness of Cover of Type 2)	-	300	-
6, Dimensions(Thickness of Cover of Type 1)	-	300	-
6, Dimensions(Thickness of Lining of Type 3)	-	300	-
6, Dimensions(Thickness of Lining of Type 2)	-	300	-
6, Dimensions(Thickness of Lining of Type 1)	-	300	-
6, Dimensions(Tolerance on Length)	-	300	-
6, Dimensions(Concentricity)	-	300	-
6, Dimensions(Internal Diameter)	-	300	-
5(Material and Construction)	-	1000	-
Cl 4(Classification)	-	500	-

-
-

11157

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 937 (1981)

Specification for Washers For Water Fittings For Fire Fighting Purposes

All Type

9600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.1(Hardness of Rubber before & after Ageing)	-	2000	-
2.1(Elongation at Break before & after Ageing)	-	4500	-
2.1()	-	4500	-
2.1(Acid & Alkali Resistant Test)	-	2500	-
4.1(Size & Dimension)	-	200	-
5.1(Workmanship and Finish)	-	200	-
6.1(Marking)	-	200	-
2.2(Leather - IS 581)	-	0	-

-
-

11158

PIONEER TESTING LABORATORY PRIVATE LIMITED

8176806

IS 291 (1989)

Naval brass rods and sections for machining purposes - Specification (Third Revision)

All Type

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.5(CONDITION)	-	200	-
Cl. No.6(FREEDOM FROM DEFECTS)	-	500	-
Cl. No.7.1(Sizes)	-	500	-
Cl. No.7.2(Tolerances)	-	200	-
Cl. No.8, Table no. 1(CHEMICAL COMPOSITION)	-	2400	-
Cl. No.9, Table no. 2(Tensile properties)	-	1500	-
Cl. No.10(MERCUROUS NITRATE TEST)	-	700	-
Cl. No.14(MARKING)	-	200	-

-
-

11159

BIS, Central Laboratory (CL)

None

IS 648 (2022)

Cold rolled non-oriented electrical steel sheet and strip - Fully processed type - Specification Sixth Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. No. 8.1 (Thickness for CRNO Strips)	-
Cl. No. 8.2 (Width Tolerance for CRNO strips)	-
Cl. No. 8.3 (Length Tolerance for CRNO strips)	-
Cl. No. 8.6 (Flatness (Wavefactor) for CRNO strips)	-
Cl. No. 9.2 & Table-1 (Ductility (Bend test) for CRNO Strips)	-
Cl. No. 8.1 (Thickness for CRNO Strips)	-

-
Grade/Designation or Element to be tested may be declared with specified requirement. Exclusion : All Except Dimension

11160

Central Institute of Petrochemicals Engineering & Technology (CIPET), CSTS - Dehradun

9178004

IS 11652 (2017)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg cement – Specification (third revision)

27680.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	500.00	-
4.1(Raw Material )	-	1050.00	Optional ( Applicable on Raw material)
4.2 (Linear Density, 900 denier)	-	500.00	Optional ( Applicable on Raw material)
4.3(Sacks)	-	500.00	-
4.4(Seam )	-	1850.00	Visual 300 Dimensions 250 Material identification 1050 Denier of stitching material 250
4.5(Lamination )	-	1350.00	Visual 300 Material identification 1050
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	500.00	-
4.7(Valve for Filling of Sacks)	-	500.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	500.00	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	500.00	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	500.00	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	2200.00	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	2200.00	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0.00	Breaking strength & Elongation have shingle Charge.
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	1100.00	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	1200.00	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	12380.00	Testing Charge- 2200.00 Conditioning Charge- 10180
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	500.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0.00	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0.00	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0.00	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0.00	-
4.2 (Fabric)	-	0.00	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0.00	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0.00	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0.00	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
4.4(Seam )	-	0.00	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0.00	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0.00	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0.00	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0.00	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0.00	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(Seam)	-	0.00	-
4.5(Lamination )	-	0.00	-
4.5(Lamination )	-	0.00	-
4.7(There shall be a double fold at the top seam and)	-	0.00	-
4.7(and then stitching shall be done through six layers.)	-	0.00	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0.00	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0.00	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0.00	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0.00	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0.00	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0.00	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0.00	-
5/5.6 (UV Resistance, )	-	0.00	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0.00	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0.00	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0.00	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0.00	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0.00	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0.00	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0.00	-
4.1(Raw Material )	-	0.00	-
4.2 (Fabric)	-	0.00	-
4.2 (Linear Density, 900 denier)	-	0.00	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0.00	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0.00	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0.00	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
4.3(Sacks)	-	0.00	-
4.4(Seam )	-	0.00	-
4.4(Seam )	-	0.00	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0.00	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0.00	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0.00	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0.00	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(Seam)	-	0.00	-
4.5(Lamination )	-	0.00	-
4.5(Lamination )	-	0.00	-
4.5(Lamination )	-	0.00	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0.00	-
4.7(Valve for Filling of Sacks)	-	0.00	-
4.7(There shall be a double fold at the top seam and)	-	0.00	-
4.7(and then stitching shall be done through six layers.)	-	0.00	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0.00	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0.00	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0.00	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0.00	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0.00	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0.00	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0.00	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0.00	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0.00	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0.00	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0.00	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0.00	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0.00	-
5/5.6 (UV Resistance, )	-	0.00	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0.00	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0.00	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0.00	-
Fig. 1- Table 1- Sr. no. ii (Ends per dm - Annex B 40 ± 2 )	-	0.00	-
Fig. 1- Table 1-Sr. no. iii (Picks per dm-Annex B 40 ± 2 )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm )	-	0.00	-
Fig. 1- Table 1-Sr. no. i (Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm )	-	0.00	-
Fig. 1, Table 1 (i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm )	-	0.00	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0.00	-
4.1(Raw Material )	-	0.00	-
4.2 (Fabric)	-	0.00	-
4.2 (Linear Density, 900 denier)	-	0.00	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0.00	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0.00	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0.00	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
4.3(Sacks)	-	0.00	-
4.4(Seam )	-	0.00	-
4.4(Seam )	-	0.00	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0.00	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0.00	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0.00	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0.00	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0.00	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(Seam)	-	0.00	-
4.5(Lamination )	-	0.00	-
4.5(Lamination )	-	0.00	-
4.5(Lamination )	-	0.00	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0.00	-
4.7(Valve for Filling of Sacks)	-	0.00	-
4.7(There shall be a double fold at the top seam and)	-	0.00	-
4.7(and then stitching shall be done through six layers.)	-	0.00	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0.00	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0.00	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0.00	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0.00	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0.00	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0.00	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0.00	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0.00	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0.00	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0.00	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0.00	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0.00	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0.00	-
5/5.6 (UV Resistance, )	-	0.00	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0.00	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0.00	-
4.2 (width of tape, 2.5 mm ± 0.1 mm)	-	0.00	-
Cl-5 Fig. 1- Table 1- Sr. no. ii(Ends per dm - Annex B 40 ± 2)	-	0.00	-
Cl-5 Fig. 1- Table 1-Sr. no. iii(Picks per dm-Annex B 40 ± 2)	-	0.00	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note )- Annex B c) Width of gusset (e) 76 ± 10 mm)	-	0.00	-
Cl-5, Fig. 1- Table 1- Sr. no. i(Dimensions, mm (see Note ) -Annex B d) Width of valve (v) 100, + 10/-5 mm)	-	0.00	-
Cl-5, Fig. 1- Table 1-Sr. no. i(Dimensions, mm (see Note )- Annex B b) Width of sack (w) 480 ± 10 mm)	-	0.00	-
Cl-5, Fig. 1, Table 1(i) Dimensions, mm (see Note ) -Annex B a) Length of sack, inside (l), 710 ± 10 mm)	-	0.00	-
4.5(and the remaining overhang shall not be more than 5 mm after trimming.)	-	0.00	-
4.1(Raw Material )	-	0.00	-
4.2 (Fabric)	-	0.00	-
4.2 (Linear Density, 900 denier)	-	0.00	-
4.2 (The woven fabric shall be of mesh, 10 × 10 per inch)	-	0.00	-
4.2 (The woven fabric shall be of weight, 79 g/m2 )	-	0.00	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: a) ± 10 percent on individual value, and )	-	0.00	-
4.2 (The denier of HDPE/ PP tape used in the manufacture of woven fabric shall be subjected to the tolerances: b) ± 5 percent on average. )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
4.3(Sacks)	-	0.00	-
4.4(Seam )	-	0.00	-
4.4(Seam )	-	0.00	-
4.4(Seam The two rows of stitches shall be separated from each other by minimum 5 mm and )	-	0.00	-
4.4(Seam The outer stitch shall be minimum 8 mm from the outer edge of the sacks. )	-	0.00	-
4.4(Seam The stitching shall be done with double fold over seam to)	-	0.00	-
4.4(that the stitches pass through a minimum of six layers of the fabric.)	-	0.00	-
4.4(The number of stitches/dm shall be 14 ± 2.)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(The material used for stitching shall be HDPE/PP tape having minimum 20 percent higher denier than the tapes used in the fabric.)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(Seam)	-	0.00	-
4.4(Seam)	-	0.00	-
4.5(Lamination )	-	0.00	-
4.5(Lamination )	-	0.00	-
4.5(Lamination )	-	0.00	-
4.6(Capacity The sack shall have the nominal filling capacity of 50 kg)	-	0.00	-
4.7(Valve for Filling of Sacks)	-	0.00	-
4.7(There shall be a double fold at the top seam and)	-	0.00	-
4.7(and then stitching shall be done through six layers.)	-	0.00	-
4.7(The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and)	-	0.00	-
4.7(and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) Non-gusseted type 70 + 6%)	-	0.00	-
5/5.1-Table 1-Sr. no. iv(Requirements, Mass of Sack- IS 1964 a) gusseted type 71 + 6%)	-	0.00	-
5/5.1(The mass of bale of sacks (excluding packing materials) shall be within ± 3 percent of the mass calculated by multiplying the number of sacks with the mass of sack specified in Table 1.)	-	0.00	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): -1969 (Part 1) a) Lengthwise , 900 (91.8) )	-	0.00	-
5/5.3-Table 1-Sr. no.v(Average breaking strength of fabric [Ravelled strip method, 325 mm × 70 mm] Min, N(kgf): - 1969 (Part 1) b) Widthwise , 900 (91.8) )	-	0.00	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of top seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0.00	-
5/5.3-Table 1-Sr. no.vi(Breaking strength of bottom seam (Ravelled strip method), Min, - IS 9030 N (kgf) 400 (40.8))	-	0.00	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) a) Lengthwise 15 to 25)	-	0.00	-
5/5.3-Table 1-Sr. no.vii(Elongation at break of fabric (Ravelled strip method), percent : - IS 1969 (Part1 ) b) Widthwise 15 to 25)	-	0.00	-
5/5.4-Table 1-Sr. no.viii(Drop impact strength - Annex C No failure)	-	0.00	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D a) For UV stabilized sacks 2.2 )	-	0.00	-
5/5.5-Table 1-Sr. no.viii(Ash content Max percent- Annex D b) For non-UV stabilized sacks 6 )	-	0.00	-
5/5.6 (UV Resistance, )	-	0.00	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to a) UV Radiation -Annex F )	-	0.00	-
5/5.6 (UV Resistance, The UV stabilized woven fabric shall have at least 50 percent retention of the original breaking strength when tested after the same has been exposed to b) Accelerated Weathering - Annex F )	-	0.00	-
Fig. 1- Table 1- Sr. no. i (Dimensions, mm (see Note ) -Annex B e) Depth of valve (f), Min, The depth of the valve (f) shall not be less than 2 times the width of the valve (v) in case of gusseted sacks and not less than 2.3 times the width of the valve (v) in case of non-gusseted sacks. )	-	0.00	-
4.4(to a depth of minimum 25 mm, so that so that)	-	0.00	-

24 Apr, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number