| 11371 |
BIS Patna Branch Laboratory (PBL)
| None
| IS 1489 (Part 1) (2015) |
Portland pozzolana cement - Specification: Part 1 fly Ash Based |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10) |
- |
|
|
|
| 7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2-iii- b (Setting Time Final- 4031 Part 5) |
- |
|
|
|
| 7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5) |
- |
|
|
|
| 7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- i (Fineness 4031 Part 2) |
- |
|
|
|
| 6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985) |
- |
|
|
|
| 7 -Table 2- ii- a (Expansion after aeration - 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- ii- b (Expansion after aeration- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- ii- a (Expansion after aeration - 4031 Part 3) |
- |
|
|
|
|
- |
-
All test facilities are available as per the IS except Transverse Strength Test (Clause 7 and Table-2) which is an optional test |
| 11372 |
BIS Patna Branch Laboratory (PBL)
| None
| IS 1659 (2004) |
Block boards - Specification (Fourth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.3 (Dimensional Requirements - Variation in thickness - Annexure E) |
- |
|
|
|
| 7.3 (Dimensional Requirements - Squareness - Annexure D) |
- |
|
|
|
| 7.3 (Dimensional Requirements - Edge Straightness - Annexure D) |
- |
|
|
|
| 7.3 (Dimensional Requirements - Thickness - Annexure E) |
- |
|
|
|
| 7.3 (Dimensional Requirements - Width - 8.1.4) |
- |
|
|
|
| 7.3 (Dimensional Requirements - Length - 8.1.4) |
- |
|
|
|
| 9.2.5 (Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K) |
- |
|
|
|
| 9.2.5 (Modulus of elasticity - AVERAGE - Annexure K) |
- |
|
|
|
| 9.2.5 (Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K) |
- |
|
|
|
| 9.2.5 (Modulus of rupture - AVERAGE - Annexure K) |
- |
|
|
|
| 9.2.4 (Mycological Test [for MR grade only] - Annexure J) |
- |
|
|
|
| 9.2.3 (Adhesion of Plies - Annexure H) |
- |
|
|
|
| 9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade]) |
- |
|
|
|
| 9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade]) |
- |
|
|
|
| 9.2.1 (Dimensional Changes caused by humidity Change in local planeness - Annexure F) |
- |
|
|
|
| 9.2.1 (Dimensional Changes caused by humidity - Delamination - Annexure F) |
- |
|
|
|
| 9.2.1 (Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F) |
- |
|
|
|
| 9.2.1 (Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F) |
- |
|
|
|
| 9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F) |
- |
|
|
|
| 9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F) |
- |
|
|
|
| 8.1.3, 6.3.3, IS 1328 (Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type]) |
- |
|
|
|
| 8.1.3, 6.3.3, IS 303 (Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type]) |
- |
|
|
|
| 9.2.6 (mechanical) (Spot test - Annexure L) |
- |
|
|
|
|
- |
-
All test facilities are available as per the IS |
| 11373 |
BIS Patna Branch Laboratory (PBL)
| None
| IS 303 (1989) |
Plywood for General Purposes - |
- |
Rs 4000/- /BWR Grade, Rs.4900/- for MR Grade View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 11.4, Table 4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual) |
- |
|
|
|
| 11.4, Table 4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average) |
- |
|
|
|
| 11.4, Table 4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual) |
- |
|
|
|
| 11.4, Table 4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average) |
- |
|
|
|
| 11.4, Table 4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual) |
- |
|
|
|
| 11.4, Table 4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average) |
- |
|
|
|
| 11.4, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual) |
- |
|
|
|
| 11.4, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average) |
- |
|
|
|
| 11.2.2 (Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only]) |
- |
|
|
|
| 11.2.1 (Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade]) |
- |
|
|
|
| 11.2.1 (Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade]) |
- |
|
|
|
| 11.3 (Moisture Content - Part 1 of IS 1734) |
- |
|
|
|
| 8 (Dimensions & Tolerances - Edge Straightness - Annexure C) |
- |
|
|
|
| 8 (Dimensions & Tolerances - Squareness - Annexure C) |
- |
|
|
|
| 8 (Dimensions & Tolerances - Thickness - Cl. 8) |
- |
|
|
|
| 8 (Dimensions & Tolerances - Width - Cl. 8) |
- |
|
|
|
| 8 (Dimensions & Tolerances - Length - Cl. 8) |
- |
|
|
|
| 9 (Workmanship and Finish - Cl.9, 8.3, Annexure C) |
- |
|
|
|
| 9 (Workmanship and Finish - Cl.9, 8.3, Annexure C) |
- |
|
|
|
| 5.2, Table 1, Table 2 (Quality Requirements - Cl. 5.2) |
- |
|
|
|
| 5.1 (Type - For BB Type) |
- |
|
|
|
| 5.1 (Type - For AB Type) |
- |
|
|
|
| 5.1 (Type - For AA Type) |
- |
|
|
|
| 4 (Grade - For MR grade) |
- |
|
|
|
| 4 (Grade - For BWR grade) |
- |
|
|
|
| cl. 13.1 (marking) |
- |
|
|
|
| 11.4, Table 4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average) |
- |
|
|
|
| 11.4, Table 4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual) |
- |
|
|
|
| 11.4, Table 4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual) |
- |
|
|
|
| 11.4, Table 4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average) |
- |
|
|
|
| 11.4, Table 4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual) |
- |
|
|
|
| 11.4, Table 4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average) |
- |
|
|
|
| 11.4, Table 4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average) |
- |
|
|
|
| 11.4, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual) |
- |
|
|
|
| 11.4, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average) |
- |
|
|
|
|
- |
-
All test facilities are available as per the IS |
| 11374 |
BIS Patna Branch Laboratory (PBL)
| None
| IS 269 (2015) |
Ordinary portland cement - Specification (Sixth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 Table-3 iv c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 Table-3 iv b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 Table-3 iv a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 Table-3 iii b (Setting Time Final) |
- |
|
|
|
| 7 Table-3 iii a (Setting Time Initial) |
- |
|
|
|
| 7 Table-3 ii b (Expansion by Autoclave) |
- |
|
|
|
| 7 Table-3 ii a (Expansion by Le Chatelier) |
- |
|
|
|
| 7 Table-3 i. (Fineness) |
- |
|
|
|
| 6.1 Table-2 viii (Alkali content) |
- |
|
|
|
| 6.1 Table-2 vii (Chloride content) |
- |
|
|
|
| 6.1 Table-2 vi (Loss on ignition) |
- |
|
|
|
| 6.1 Table-2 v (Total Sulphur Content calculated as Sulphuric Anhydride) |
- |
|
|
|
| 6.1 Table-2 iv (Magnesia) |
- |
|
|
|
| 6.1 Table-2 iii. (Insoluble residue) |
- |
|
|
|
| 7 Table-3 ii b (Expansion after aeration) |
- |
|
|
|
| 7 Table-3 ii a (Expansion after aeration) |
- |
|
|
|
| 6.1 Table-2 ii. (Ratio of percentage of alumina to that of iron oxide) |
- |
|
|
|
| 6 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985) |
- |
|
|
|
|
- |
-
All test facilities are available as per the IS except Transverse Strength Test (Clause 7 and Table-3) which is an optional test |
| 11375 |
BIS Patna Branch Laboratory (PBL)
| None
| IS 455 (2015) |
Portland slag cement - Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7 Table 1 iv c (Compretsive Strenqth 672 ± 4 hr
IS 4031(Part 6)) |
- |
|
|
|
| 7 Table 1 iv b (Compretsive Strenqth 168 ± 2 hr
IS 4031(Part 6)) |
- |
|
|
|
| 7 Table 1 iv a (Compretsive Strenqth .72 ± 1 hr
IS 4031(Part 6)) |
- |
|
|
|
| 7 Table 1 iii b (Setting Time ( by Vicat Apparatus ), Final
IS 4031(Part 5)) |
- |
|
|
|
| 7 Table 1 iii a (Setting Time ( by Vicat Apparatus ),Initial
IS 4031(Part 5)) |
- |
|
|
|
| 7 Table 1 ii b (Soundness, Autoclave expansion
IS 4031(Part 3) ) |
- |
|
|
|
| 7 Table 1 ii a (Soundness, Le-Chate1ier expansion
IS 4031(Part 3) ) |
- |
|
|
|
| 7 Table 1 i (Fineness
IS 4031(Part 2)) |
- |
|
|
|
| 6 - Table - 1 vii ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 vi (Chloride content - Cl 4.13 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 v (Loss on ignition - Cl 6.2 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iv (Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 ii (Magnesia - Cl 6.8 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 i (Insoluble residue - Cl 6.9 of IS 4032:1985) |
- |
|
|
|
| Cl. 7 Table-2 (Cl. 7 Table-2 ii a (Expansion after aeration )) |
- |
|
|
|
| Cl. 7 Table-2 (Cl. 7 Table-2 ii b (Expansion after aeration )) |
- |
|
|
|
|
- |
-
All test facilities are available as per the IS except Transverse Strength Test (Clause 7 and Table 2) which is an optional test |
| 11376 |
BIS Patna Branch Laboratory (PBL)
| None
| IS 12818 (2010) |
Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9.5 (Tensile Strength
IS 12235(Part 13)) |
- |
|
|
|
| 9.2 (Internal Diameter) |
- |
|
|
|
| 9.3 (Density
IS 12235 (Part 14)) |
- |
|
|
|
| 9.1 ( Visual Appearance) |
- |
|
|
|
| 5 (COLOUR) |
- |
|
|
|
| 7.2 and Table 5, 6 & 7
Fig 1B (Wall thickness, Max) |
- |
|
|
|
| 7.2 and Table 5, 6 & 7
Fig 1B (Wall thickness, Min) |
- |
|
|
|
| 7.2 and Table 5, 6 & 7
Fig 1B (Mean Outer Diameter over Connection) |
- |
|
|
|
| 7.2 and Table 5, 6 & 7
Fig 1B (Outer Diameter at any point, Max) |
- |
|
|
|
| 7.2 and Table 5, 6 & 7
Fig 1B (Outer Diameter at any point , Min) |
- |
|
|
|
| 7.2 and Table 5, 6 & 7
Fig 1B (Mean Outer Diameter of Pipe , Max) |
- |
|
|
|
| 7.2 and Table 5, 6 & 7
Fig 1B (Mean Outer Diameter of Pipe, Min) |
- |
|
|
|
| 7.2 and Table 5, 6 & 7
Fig 1B (Nominal Diameter) |
- |
|
|
|
| 7.2 and Table 5, 6 & 7
Fig 1B (DIMENSIONS - Casing Pipes) |
- |
|
|
|
| 8.4 (Sealing rings - Hardness) |
- |
|
|
|
| 9.6 (Vicat Softening Temperature
IS 12235 (Part 2).) |
- |
|
|
|
| 9.4 and Table 14 (Resistance to External Blows at 0 ?C
IS 12235 (Part 9)) |
- |
|
|
|
| 8.1 to 8.3 and Table 11 &12
Fig 3A & 4A (THREADING OF SCREEN ANDCASING PIPES.
IS 554.) |
- |
|
|
|
|
- |
-
All test facilities available except Effect on Water (Clause 9.7) |
| 11377 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 455 (2015) |
Portland slag cement - Specification |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 vii ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 vi (Chloride content - Cl 4.13 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 v (Loss on ignition - Cl 6.2 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iv (Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 ii (Magnesia - Cl 6.8 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 i (Insoluble residue - Cl 6.9 of IS 4032:1985) |
- |
|
|
|
| 7 Table 1 i (Fineness
IS 4031(Part 2)) |
- |
|
|
|
| 7 Table 1 ii a (Soundness, Le-Chate1ier expansion
IS 4031(Part 3) ) |
- |
|
|
|
| 7 Table 1 ii b (Soundness, Autoclave expansion
IS 4031(Part 3) ) |
- |
|
|
|
| 7 Table 1 iii a (Setting Time ( by Vicat Apparatus ),Initial
IS 4031(Part 5)) |
- |
|
|
|
| 7 Table 1 iii b (Setting Time ( by Vicat Apparatus ), Final
IS 4031(Part 5)) |
- |
|
|
|
| 7 Table 1 iv a (Compretsive Strenqth .72 ± 1 hr
IS 4031(Part 6)) |
- |
|
|
|
| 7 Table 1 iv b (Compretsive Strenqth 168 ± 2 hr
IS 4031(Part 6)) |
- |
|
|
|
| 7 Table 1 iv c (Compretsive Strenqth 672 ± 4 hr
IS 4031(Part 6)) |
- |
|
|
|
| Cl. 7 Table-2 (Cl. 7 Table-2 v (Transverse Strength (Optional) ) |
- |
|
|
|
| Cl. 7 Table-2 (Cl. 7 Table-2 ii a (Expansion after aeration )) |
- |
|
|
|
|
- |
-
Mech-Facility not available for transverse strength test( optional);
Chem-Declaration for chloride regarding end use of cement required as per Table 1, Confirmation for testing Alkali Content required. |
| 11378 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 4984 (2016) |
Polyethylene pipes for water supply - Specification (Fifth Revision) |
All varieties |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.6 (Overall migration) |
- |
|
|
|
| 7.4 table -3 & 4 (6.1 Dimensions) |
- |
|
|
|
| 8.2 (Longitudinal Reversion Test) |
- |
|
|
|
| 8.4 ( Melt Flow Rate) |
- |
|
|
|
| 8.8 (Tensile Strength for Butt-fusion) |
- |
|
|
|
| 8.9 table-6 (Elongation at Break) |
- |
|
|
|
| 7.4 table -3 & 4 (6.1 Dimensions) |
- |
|
|
|
| 8.8 (Tensile Strength for Butt-fusion) |
- |
|
|
|
| 8.9 table-6 (Elongation at Break) |
- |
|
|
|
| 8.3 (Carbon black) |
- |
|
|
|
| 6.2.1 (6.1.1 Identification Stripes) |
- |
|
|
|
| 6.1.4 (PIPE DESCRIPTION) |
- |
|
|
|
| Clause 7.1 (Visual Apperance) |
- |
|
|
|
| 6.2 (Colour) |
- |
|
|
|
| Cl. 8.3 (Carbon Black Dispersion) |
- |
|
|
|
| 8.7 (Density) |
- |
|
|
|
| 8.5 (Oxidation Induction Time) |
- |
|
|
|
|
- |
-
Mech- Facility not available for- Hydraulic test, Slow Crack Growth Rate and Internal Pressure Creep Rupture test. Fused pipes required to be provided for T/S of butt fusion joints. Chem- Facility available |
| 11379 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 1489 (Part 1) (2015) |
Portland pozzolana cement - Specification: Part 1 fly Ash Based |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
|
|
|
| 7 -Table 2- i (Fineness 4031 Part 2) |
- |
|
|
|
| 7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- ii- a (Expansion after aeration - 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- ii- b (Expansion after aeration- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5) |
- |
|
|
|
| 7 -Table 2-iii- b (Setting Time Final- 4031 Part 5) |
- |
|
|
|
| 7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10) |
- |
|
|
|
| 7 -Table 2- ii- b (Expansion after aeration- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- ii- a (Expansion after aeration - 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- v (Transverse Strength - IS 4031 Part 8 (Optional)) |
- |
|
|
|
|
- |
-
Mech- Facility not available for transverse strength test( optional); Chem-Declaration for chloride regarding end use of cement (as per Table 1) and declaration of fly ash content & Confirmation for testing Alkali Content required. |
| 11380 |
BIS, Eastern Regional Laboratory (ERL)
| None
| IS 694 (2010) |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision) |
Complete for Category 01- up to & including 400 sq mm |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1 (Conductor - Material) |
- |
|
|
|
| 4.2 (Conductor resistance test) |
- |
|
|
|
| 5.1 (Insulation) |
- |
|
|
|
| 6.1 (Filler) |
- |
|
|
|
| 4.1 (Annealing test (for copper)) |
- |
|
|
|
| 4.1 (Tensile test (for Al)-Before Stranding) |
- |
|
|
|
| 4.1 (Tensile test (for Al)- After Stranding) |
- |
|
|
|
| 4.1 (Wrapping test (for Al)) |
- |
|
|
|
| 10.11 (Per sulphate test (for tinned Cu cable only)) |
- |
|
|
|
| (Cl.16.1)
(Cl.19.1) (Conductor- Diameter ) |
- |
|
|
|
| 5.2 (Application ) |
- |
|
|
|
| 6.2 (Filler) |
- |
|
|
|
| 7 (Binder Tape) |
- |
|
|
|
| 8.1 (Sheath Material ) |
- |
|
|
|
| (Cl. 18.1.4)
(Cl. 19.1.5)
(Cl. 20.1.4)
(Cl. 22.1.4) (Colour of Sheath) |
- |
|
|
|
| 9 (Overall dimensions) |
- |
|
|
|
| 9.1 (Ovality) |
- |
|
|
|
| Table 1 iii) c) 1) (Tensile strength (Without ageing)) |
- |
|
|
|
| Table 1 iii) c) 1) (Elongation (Without ageing)) |
- |
|
|
|
| Table 1 iii) c) 3) (Tensile strength (After ageing)) |
- |
|
|
|
| Table 1 iii) c) 3) (Elongation (After ageing)) |
- |
|
|
|
| Table 1 iii) c) 3) (TS variation) |
- |
|
|
|
| Table 1 iii) c) 3) (Elongation variation) |
- |
|
|
|
| Table 1 iii) d) 1) (Sheath -Tensile strength (Without ageing)) |
- |
|
|
|
| Table 1 iii) d) 1) (Sheath- Elongation (Without ageing)) |
- |
|
|
|
| Table 1 iii) d) 3) (Sheath- Tensile strength (After ageing)) |
- |
|
|
|
| Table 1 iii) d) 3) (Sheath- Elongation (After ageing)) |
- |
|
|
|
| Table 1 iii) d) 3) (Sheath- TS variation) |
- |
|
|
|
| Table 1 iii) d) 3) (Sheath- Elongation variation) |
- |
|
|
|
| Table 1 iii) c) 2) (Loss of mass- Insulation ) |
- |
|
|
|
| Table 1 iii) d) 2) (Loss of mass- Sheath ) |
- |
|
|
|
| Table 1 iii) c) 4) (Shrinkage-Insulation) |
- |
|
|
|
| Table 1 iii) d) 4) (Shrinkage- Sheath ) |
- |
|
|
|
| Table 1 iii) c) 5) (Heat shock-Insulation ) |
- |
|
|
|
| Table 1 iii) d) 5) (Heat shock-Sheath ) |
- |
|
|
|
| Table 1 iii) c) 6) (Hot deformation - Indentation depth- Insulation) |
- |
|
|
|
| Table 1 iii) d) 6) (Hot deformation -Indentation depth - Sheath ) |
- |
|
|
|
| 10.4 (Flammability test-Burning after flame removal) |
- |
|
|
|
| 10.4 (Flammability test- Unaffected portion) |
- |
|
|
|
| Table 1 iii) c) 8) (Cold bend for insulation) |
- |
|
|
|
| Table 1 iii) d) 8) (Cold bend for sheath) |
- |
|
|
|
| Table 1 iii) c) 9) (Cold impact for insulation) |
- |
|
|
|
| Table 1 iii) d) 9) (Cold impact for sheath) |
- |
|
|
|
| Table 1 iii) c) 7) (Thermal stability- Insulation ) |
- |
|
|
|
| Table 1 iii) d) 7) (Thermal stability- Sheath ) |
- |
|
|
|
| table 1 e) 3) (Volume Resistivity - Room temp ) |
- |
|
|
|
| table 1 e) 3) (Volume Resistivity - Maximum temp) |
- |
|
|
|
| table 1 e) 3) (IR constant- Room temp ) |
- |
|
|
|
| table 1 e) 3) (IR constant- max. Temp) |
- |
|
|
|
| 10.1 (HV (water immersion)) |
- |
|
|
|
| 10.1 (HV (water immersion)) |
- |
|
|
|
| 10.2 (HV (room temperature)) |
- |
|
|
|
| 11 (Identification) |
- |
|
|
|
| 11.1 (Durability) |
- |
|
|
|
| 11.2 (Legibility) |
- |
|
|
|
| 4.1 (Conductor - Material) |
- |
|
|
|
| 4.1 (Conductor - Material) |
- |
|
|
|
| 4.1 (Conductor - Material) |
- |
|
|
|
| 8.3 (Avarage thickness of Sheath) |
- |
|
|
|
| 5.3 (Minimum thickness of insulation) |
- |
|
|
|
| 5.3 (Avarage thickness of insulation) |
- |
|
|
|
| Table 2, IS 8130 (No fo wire in a conductor) |
- |
|
|
|
| 4, IS 8130 (Construction of conductor) |
- |
|
|
|
| 8.1 (Sheath Material ) |
- |
|
|
|
| 12.0 (Core identification) |
- |
|
|
|
| Table 1 (Category Code) |
- |
|
|
|
| Table 4 (Copper purity test) |
- |
|
|
|
| 8.3 (Minimum thickness of Sheath) |
- |
|
|
|
| 4.4 (Joints in Conductor) |
- |
|
|
|
| 4.4 (Joints in Conductor) |
- |
|
|
|
| 10.11 (Persulphate Test ) |
- |
|
|
|
| 10.9 (Additional ageing test (OU cables only) -HV test (at 60±3oC)) |
- |
|
|
|
|
- |
-
Chem- Facility available for Cu purity only,Gr to be declared. Elect- Cat -01, 02 (Facility not available for- Loss of mass above 1.2 mm, Tensile & Elongation above 2.0 mm thickness.) Cat- FR, FR-LSH-( Facility not available for- oxygen index, temp. index test, Smoke Density Tests). Chem- Facility available for Cu purity only,Grade/class to be declared |
| 11381 |
BIS, Central Laboratory (CL)
| None
| IS 13334 : Part 1 (2014) |
Skimmed milk powder - Specification: Part 1 standard grade (Second Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.6 (Bacterial count) |
- |
|
|
|
| 5.6 (Coliform count ) |
- |
|
|
|
| 5.6 (Escherichia coli) |
- |
|
|
|
| 5.6 (Coagulase positive Staphylococcus aureus) |
- |
|
|
|
| 5.6 (Salmonella) |
- |
|
|
|
| 5.6 (Spore count, Aerobic (Bacillus cereus)) |
- |
|
|
|
| 5.6 (Spore count, Anaerobic (Sulfite reducing Clostridia)) |
- |
|
|
|
| 5.6 (Listeria monocytogenes) |
- |
|
|
|
| 4 (Description) |
- |
|
|
|
| Cl 5.1 (Milk intended (IS 1479 - Part 1)) |
- |
|
|
|
| 5.2 (Absence of extraneous matter, added colour and added flavour) |
- |
|
|
|
| Cl 5.3 (Calcium chloride,
citric acid and sodium citrate, sodium salts of
orthophosphoric acid and polyphosphoric acid (as
linear phosphate), ) |
- |
|
|
|
| Cl 5.4 (The flavour of the product or of the reconstituted
milk shall be pleasant and clean (see IS 10030).) |
- |
|
|
|
| 5.6 (Moisture) |
- |
|
|
|
| 5.6 (Milk protein in milk solids not fat) |
- |
|
|
|
| 5.6 (Milk fat) |
- |
|
|
|
| 5.6 (Insolubility index) |
- |
|
|
|
| 5.6 (Milk fat) |
- |
|
|
|
| 5.6 (Titratable acidity (lactic acid)) |
- |
|
|
|
| 5.6 (Scorched particles) |
- |
|
|
|
| 5.6 (Total ash (on dry basis)) |
- |
|
|
|
| 5.6 (Coliform count ) |
- |
|
|
|
| 5.6 (Salmonella) |
- |
|
|
|
| 5.6 (Bacterial count) |
- |
|
|
|
|
- |
-
500 gm x 3 |
| 11382 |
BIS, Western Regional Laboratory (WRL)
| None
| IS 1786 (2008) |
High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision) |
- |
- View breakup
Rs 16740/- Excluding Pull Out Test and micro-alloying elements
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 6.1 (Nominal Size) |
- |
|
|
|
| Cl 7.2 (Weight) |
- |
|
|
|
| Cl. 8.1 Table 3 (Elongation, percentage) |
- |
|
|
|
| Cl. 8.1 Table 3 (TS/YS ratio) |
- |
|
|
|
| Cl. 8.1 Table 3 (Tensile Strength (TS)) |
- |
|
|
|
| Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), ) |
- |
|
|
|
| Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar)) |
- |
|
|
|
| Cl. 9.3, Table 4 (Bend Test ) |
- |
|
|
|
| Cl.9.4 & Cl. 9.4.1 (Rebend test) |
- |
|
|
|
| 4.1 (Silicon %) |
- |
|
|
|
| 4.1 (Sulphur %) |
- |
|
|
|
| 4.1 (Phosphorus %) |
- |
|
|
|
| 4.1 (Manganese %) |
- |
|
|
|
| 4.1 (Carbon %) |
- |
|
|
|
| Cl. 8.1 Table 3 (Yield Stress (YS)) |
- |
|
|
|
| 4.1 (Sulphur and phosphorous) |
- |
|
|
|
|
- |
-
Test facilities are not available for the following:
(1) Total elongation at maximum force,
(2) Pull out test (Type test)
(3) Sizes above 25 mm,
(4) Micro-alloy/low alloys, Nb, V, B and Ti, Cr, Cu, Ni, Mo, Nirogen and nitrogen binding elements, like Nb, V, Ti, Al |
| 11383 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 2347 (2017) |
Domestic pressure cooker - Specification (Sixth Revision) |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.1 (testing of handles of the cooker) |
- |
|
|
|
| 8.9 (Test for Spring Loaded Mechanism) |
- |
|
|
|
| 8.8 (Test for Spring Loaded Mechanism) |
- |
|
|
|
| 8.6.2 (Tests for Removal of Lid under Pressure For inner Lid Cooker) |
- |
|
|
|
| 8.6.1 (Tests for Removal of Lid under Pressure For Outer Lid Cooker) |
- |
|
|
|
| 8.5 (Bursting Pressure Test) |
- |
|
|
|
| 8.6.2 (Tests for Removal of Lid under Pressure For inner Lid Cooker) |
- |
|
|
|
| 8.6.1 (Tests for Removal of Lid under Pressure For Outer Lid Cooker) |
- |
|
|
|
| 8.5 (Bursting Pressure Test) |
- |
|
|
|
| 8.4 (Test for Safety Pressure Relief Device) |
- |
|
|
|
| 8.3 (Operating Test for Pressure Regulating Device) |
- |
|
|
|
| 8.2 (Proof Pressure Test) |
- |
|
|
|
| 8.1 (Air Pressure Test) |
- |
|
|
|
| 7.4 (WORKMANSHIP AND FINISH) |
- |
|
|
|
| 7.3 (WORKMANSHIP AND FINISH) |
- |
|
|
|
| 7.2 (WORKMANSHIP AND FINISH) |
- |
|
|
|
| 7.1 (WORKMANSHIP AND FINISH) |
- |
|
|
|
| 6.4.1.1 (Handles and Knobs) |
- |
|
|
|
| 6.2.2 (Safety Relief Device) |
- |
|
|
|
| 6.2.1 (Safety Relief Device) |
- |
|
|
|
| 6.2 (Safety Relief Device) |
- |
|
|
|
| 6.1.5 (Pressure Regulating Device) |
- |
|
|
|
| 6.1.4 (Pressure Regulating Device) |
- |
|
|
|
| 6.1.3 (Pressure Regulating Device) |
- |
|
|
|
| 6.1.2 (Pressure Regulating Device) |
- |
|
|
|
| 6.1.1 (Pressure Regulating Device) |
- |
|
|
|
| 6.1 (Pressure Regulating Device) |
- |
|
|
|
| 6 (CONSTRUCTION) |
- |
|
|
|
| 4.1 (Capacity) |
- |
|
|
|
| 6.4.1 (Handles and Knobs) |
- |
|
|
|
| 6.1.1 (Construction - Pressure Regulating Device) |
- |
|
|
|
| 6.2 NOTE (Construction-Safety Relief Device) |
- |
|
|
|
| 6.3 (Construction-Temperature Responsive Pressure Relief Device) |
- |
|
|
|
| 6.3.1 (Temperature Responsive Pressure Relief Device) |
- |
|
|
|
| 6.3.1 (Temperature Responsive Pressure Relief Device) |
- |
|
|
|
| 6.4.1 (Construction - Handles and Knobs) |
- |
|
|
|
| 8.4 Annex H-1.1 (Test for SPRD - For Destructible Devices ) |
- |
|
|
|
| 8.4 Annex H-1.2 (Test for SPRD - For Resettable Devices ) |
- |
|
|
|
| 8.4 (Test for SPRD) |
- |
|
|
|
| 8.10 (a) (Handles of the cooker- Resistance to Burning) |
- |
|
|
|
| 8.10 (b) (Handles of the cooker- Heat Resistance) |
- |
|
|
|
| 8.10 (c) (Handles of the cooker- Torque Strength) |
- |
|
|
|
| 8.10 (d) (Handles of the cooker- Bending Strength) |
- |
|
|
|
| 8.10 (e) (Handles of the cooker- Fatigue Resistance) |
- |
|
|
|
| 8.10 (f) (Handles of the cooker- Thermal Insualtion Test) |
- |
|
|
|
| 8.10 NOTES (3) (Handles of the cooker - Proof Pressure) |
- |
|
|
|
| 8.10 NOTES (4) (Handles of the cooker) |
- |
|
|
|
| 8.10 NOTES (5) (Handles of the cooker) |
- |
|
|
|
| 8.10 NOTES (6) (Handles of the cooker) |
- |
|
|
|
| 8.11 (External Coating ) |
- |
|
|
|
| 8.12 (Internal Coating) |
- |
|
|
|
| 8.14 (3 Ply Construction Cooker Body) |
- |
|
|
|
|
- |
-
Except Material Testing |
| 11384 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 1489 (Part 1) (2015) |
Portland pozzolana cement - Specification: Part 1 fly Ash Based |
- |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985) |
- |
|
|
|
| 6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985) |
- |
|
|
|
| 7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10) |
- |
|
|
|
| 7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 -Table 2-iii- b (Setting Time Final- 4031 Part 5) |
- |
|
|
|
| 7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5) |
- |
|
|
|
| 7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- i (Fineness 4031 Part 2) |
- |
|
|
|
| 7 -Table 2- ii- a (Expansion after aeration - 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- ii- b (Expansion after aeration- 4031 Part 3) |
- |
|
|
|
| 7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3) |
- |
|
|
|
|
- |
-
Expect Transverse Strength |
| 11385 |
BIS, Bengaluru Branch Laboratory (BNBL)
| None
| IS 269 (2015) |
Ordinary portland cement - Specification (Sixth Revision) |
33 GR 43GR 53 GR |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1 Table-2 i. (Ratio of percentage of lime to percentage of silica, alumina and iron oxide) |
- |
|
|
|
| 6 - Table - 1 ii (Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985) |
- |
|
|
|
| 6.1 Table-2 iii. (Insoluble residue) |
- |
|
|
|
| 6.1 Table-2 iv (Magnesia) |
- |
|
|
|
| 6 - Table - 1 v (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985) |
- |
|
|
|
| 6.1 Table-2 vi (Loss on ignition) |
- |
|
|
|
| 6 - Table - 1 vii (Chloride content - Cl 4.13 of IS 4032:1985) |
- |
|
|
|
| 6.1 Table-2 viii (Alkali content) |
- |
|
|
|
| 7 Table-3 iv c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 Table-3 iv b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 Table-3 iv a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6) |
- |
|
|
|
| 7 Table-3 iii b (Setting Time Final) |
- |
|
|
|
| 7 Table-3 iii a (Setting Time Initial) |
- |
|
|
|
| 7 Table-3 ii b (Expansion by Autoclave) |
- |
|
|
|
| 7 Table-3 i. (Fineness) |
- |
|
|
|
| 7 Table-3 ii a (Expansion by Le Chatelier) |
- |
|
|
|
| 7 Table-3 ii a (Expansion after aeration) |
- |
|
|
|
| 7 Table-3 ii b (Expansion after aeration) |
- |
|
|
|
|
- |
-
Expect Transverse Strength |
| 11386 |
BIS, Central Laboratory (CL)
| None
| IS 303 (2024) |
Plywood for General Purposes â Specification (Fourth Revision) |
- |
Rs 4000/- /BWR Grade, Rs.4900/- for MR Grade View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-5.1 (Classification by appearance) |
- |
|
|
|
| Cl-11.6 (Formaldehyde Content Test) |
- |
|
|
|
|
- |
-
Facility not available: Static bending strength above 15 mm thickness. ;
Excluding- Steady State Formaldehyde Emission Test (Cl. 11.7) |
| 11387 |
BIS, Guwahati Branch Laboratory (GBL)
| None
| IS 1786 (2008) |
High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision) |
Up to nominal dia of 25 mm |
- View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 8.1 Table 3 (Yield Stress (YS)) |
- |
|
|
|
| Cl. 8.1 Table 3 (Tensile Strength (TS)) |
- |
|
|
|
| Cl. 8.1 Table 3 (TS/YS ratio) |
- |
|
|
|
| Cl. 8.1 Table 3 (Elongation, percentage) |
- |
|
|
|
| Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar)) |
- |
|
|
|
| Cl.9.4 & Cl. 9.4.1 (Rebend test) |
- |
|
|
|
| Cl. 7.2 Table -2 (Nominal Mass) |
- |
|
|
|
| Cl. 6.1 (Nominal Size) |
- |
|
|
|
| Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), ) |
- |
|
|
|
| Cl. 9.3, Table 4 (Bend Test ) |
- |
|
|
|
| Cl. 8.1 Table 3 (Total Elongation at Maximum Force) |
- |
|
|
|
| Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON ) |
- |
|
|
|
| Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR) |
- |
|
|
|
| Clause - 4.2 & 4.2.1 (Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS) |
- |
|
|
|
| Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700) (Sulphur & Phosphorous) |
- |
|
|
|
| Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
|
|
|
| Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D) (Carbon Equivalent) |
- |
|
|
|
| 4.1 (Carbon %) |
- |
|
|
|
| 4.1 (Sulphur %) |
- |
|
|
|
| 4.1 (Phosphorus %) |
- |
|
|
|
| 4.1 (Sulphur and phosphorous) |
- |
|
|
|
|
- |
-
1. T.F. not available for Pull out test.
2. Tensile Strength, Yield Stress, Elongation T.F. available up to nominal dia of 25 mm. |
