BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11942 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

11401

BIS, Western Regional Laboratory (WRL)

None

IS 10631 (1983)

Specification for stainless steel for welding electrode core wire

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 Table 1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
5.1 Table 1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
7 (Size and Tolerances)	-

-
Test facilities are not available for the following: 1. Cr, Ni, Mo

11402

BIS, Central Laboratory (CL)

None

IS 4947 (2006)

Foam concentrate for producing mechanical foam for fire fighting - Specification (Fourth Revision)

Please see remarks. View breakup
Rs. 10200/- and testing charges as per relevant referred ISs.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.1 (A) (Carbon)	-
Clause 4.1 (A) (Sulphor )	-
Clause 4.1 (A) (Phosphorous)	-
Clause 4.1 (A) (Manganese)	-
Cl 3 (General Requirements)	-
Cl 5 (Construction)	-
Cl 6 (Capacity and Contents)	-
Cl 7 (Performance Requirements )	-
Cl 7.3 (Leakage Test)	-
Cl 8 (Finish)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

11403

BIS, Central Laboratory (CL)

None

IS 253 (2014)

Specification for common salt (Fourth Revision)

6690 View breakup
Total testing charges for common Salt = Rs 6651/- Total testing charges for Dairy Salt = Rs 6726/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause -3 for common salt 3.1 ( 3.1.1 ) ( The material shall be crystalline solid, white or pale pink or light grey in colour.)	-
Clause -3 for common salt 3.1 ( 3.1.2 ) Annex-2 (Moisture The material shall contain not more than 6.0 percent by mass of moisture, on as received basis, when tested according to the method given in A-2)	-
Clause-3.2 for dairy salt (3.2.1) (The material shall be crystalline white solid and free from any visible impurities.)	-
Clause-3.2 for dairy salt (3.2.3) Annex -2 (3.2.3 Moisture The material shall contain not more than 0.5 percent by mass of moisture, on as received basis, when tested according to the methods given in A-2.)	-
Table 1 (i) Annex -4 (Water insoluble matter, common)	-
Table 1 (i) Annex -4 (Water insoluble matter, Dairy)	-
Table 1 (ii) Annex-5 (Chloride content (as NaCl)common)	-
Table 1 (ii) Annex-5 (Chloride content (as NaCl), Dairy)	-
Table 1 (iii) Annex-6 ( Matter soluble in water, other than sodium chloride, common)	-
Table 1 (iii) Annex-6 ( Matter soluble in water, other than sodium chloride, Dairy)	-
Table 1 (iv) (Calcium (as Ca), water soluble, percent by mass, common)	-
Table 1 (iv) Annex-7 (Calcium (as Ca), water soluble, percent by mass, Dairy)	-
Table 1 (v) (Magnesium (as Mg), water soluble, percent by mass, common )	-
Table 1 (v) Annex-7 (Magnesium (as Mg), water soluble, percent by mass, Dairy )	-
Table 1 (vi) (Sulphate as SO2 percent by mass, common)	-
Table 1 (vi) Annex-8 (sulphate as SO2 percent by mass, Dairy)	-
Table 1 (vii) Annex-9 (Alkalinity (as Na2CO3), common)	-
Table 1 (vii) Annex-11 (Alkalinity (as Na2CO3), Dairy)	-
Table 1 (viii) (Lead (as Pb), common)	-
Table 1 (viii) (Lead (as Pb),Dairy )	-
Table 1 (ix) (Iron (as Fe), common)	-
Table 1 (ix) (Iron (as Fe), Dairy)	-
Table 1 (x) Annex-11 (x) Arsenic (as As), common)	-
Table 1 (x) Annex-11 (x) Arsenic (as As),Dairy)	-
Table 1 (xi) Annex-12 (Copper (as Cu), common)	-
Table 1 (xi) Annex-12 (Copper (as Cu), Dairy )	-

-
-

11404

BIS, Central Laboratory (CL)

None

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.7.1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Depth))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Width))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections(Thickness))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Weigth))	-
Cl.9.1, Table 1 (Dimensions and Properties of Hollow Sections (Area of Section))	-
Cl. 10.1, 14.1, 18.1 (Straightness)	-
Cl. 10.2, Fig 1 (Outside dimension (B))	-
Cl. 10.2, Fig 1 (Outside dimension (H))	-
Cl. 10.2, Fig 1 (Outside dimension (T))	-
Cl. 10.4, Fig 2 (Concavity, X1)	-
Cl. 10.4, Fig 2 (Convexity, X2)	-
Cl. 10.5, Fig 3 (Squareness of side)	-
Cl. 10.6, Fig 4 (External Corner Radius)	-
Cl. 10.7, Fig 5 (Total twist, V)	-
Cl. 15.2, Table 3 (Tensile Strength- IS 1608)	-
Cl. 15.2, Table 3 (Yield Strength- IS 1608)	-
Cl. 15.2, Table 3 (Elongation- IS 1608)	-
Cl. 14.1 (Exact Length)	-
Cl. 14.1 (Random Length)	-
Cl. 14.1 (Weight on individual length)	-
Cl.7.1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.7.1 (Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

11405

BIS, Central Laboratory (CL)

None

IS 15692 (2006)

Hexaconazole, suspension concentrate (SC) - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.5 (Wet Sieve Test)	-
3.32 (Acidity/Alkalinity)	-
3.2.2 (Pourability (Rinsed Residue))	-
3.2.3 (Spontaneity of Dispersion)	-
3.2.4 (Suspensibiliy)	-
3.3.1 (Hexaconazole Content)	-
3.2.6 (Persistent Foam)	-

-
-

11406

BIS, Central Laboratory (CL)

None

IS 11708 (1986)

Specification for hand, mechanical

- View breakup
Rs. 1500/- + testing charges as per referred ISS (excluding cyclic and load test) (only visual test for Cl. 6).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
1.1 (Scope)	-
1.2 (Scope)	-
1.3 (Scope)	-
2,Table 1 ( Dimension)	-
3.1 (Light material)	-
3.2 (Material for cable)	-
3.3 ( Durometer hardness of Shore A 60-75 ; Appendix F of IS :9766)	-
3.4 (The functional hand)	-
3.5 (The finger)	-
5.1 (Provisions of adaption)	-
5.4 (Aluminium finger)	-
5.5 (Total weight)	-
6,6.1 (Workmanship &Finish)	-

-
-

11407

BIS, Central Laboratory (CL)

None

IS 4882 (1979)

Specification for low carbon steel wire for rivets for use in bearing industry (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1,4.1.1,5.1 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Sulphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Phosphorus- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
4.1,4.1.1,5.1 (Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

11408

BIS, Eastern Regional Laboratory (ERL)

None

IS 5484 (1997)

Ec grade aluminium rod produced by continuous casting and rolling - Specification (Second Revision)

complete

Rs.3240.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.1 (Diameter - IS:5484)	-
8-Table-1 (Tensile Strength - IS:1608)	-
9 (Resistyvity at 20 degree C -IS:398(P-2))	-
11.1 (Joint- IS:5484)	-
12.1 (Freedom from defects- IS:5484)	-
12.2 (Finish - IS:5484)	-
5.1 -Table-1, ii (Silicon - IS:504)	-
5.1 -Table-1, iii (Iron - IS:504)	-
5.1 -Table-1, iv (Copper - IS:504)	-
5.1 -Table-1, vi (Manganese - IS:504)	-
5.1 -Table-1, vi (Chromium - IS:504)	-
5.1 -Table-1, i (Aluminium- IS:504)	-
5.1 -Table-1, v (Titanium+ Vanadium - IS:504)	-
8-Table-1 (Tensile Strength - IS:1608)	-

-
Test facility is not available for Aluminium, Titanium, vanadium & Zirconium. Tensile strength range to be declared.

11409

BIS, Central Laboratory (CL)

None

IS 15848 (2009)

Zinc sulphate, monohydrate, agricultural grade - Specification

6300/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description)	-
3.2.Table 1.i (Zinc (as Zn))	-
3.2.Table 1.ii (Magnesium (as Mg)	-
3.2.Table 1.iii (Copper (as Cu))	-
3.2.Table 1.iv (Lead (as Pb))	-
3.2.Table 1.v (pH of 5 percent solution)	-
3.2.Table 1.vii (Iron (as Fe))	-

-
-

11410

BIS, Central Laboratory (CL)

None

IS 11569 (1986)

Specification for cervical collar

1050 View breakup
Rs 1050/- (Cl. 2.5 & Cl. 2.6 only for Visual Test/Observation)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.6 (Reinforcement Material)	-
3 (Shape and Dimensions ,Fig 1)	-
3 (1)L)	-
3 (2)L2)	-
3 (3)L3)	-
4 (Workmanship and Finish)	-

-
-

11411

BIS, Central Laboratory (CL)

None

IS 4454 : Part 4 (2001)

Steel wires for mechanical springs: Part 4 stainless steel wire (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Suphur- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Phosphorous- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
Table 1. Cl.1.1,1.2,7.1 & 7.2 (Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-
8 (Freedom from defects)	-
9 (Dimensions & Tolerances)	-
10.1 (Tensile test)	-
10.2 (Wrapping test)	-
10.3 (Reverse torsion test)	-
10.5 (Bend test)	-
11 (Surface finish)	-

-
-

11412

BIS, Eastern Regional Laboratory (ERL)

None

IS 8952 (1995)

Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes - Specification (First Revision)

All grades except for the tests mentioned in remarks

4840 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4,7.1 Table 1 (Carbon- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Sulphur- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Phosphorous- IS 228 or any other established instrumental /Chemical method)	-
4,7.1 Table 1 (Silicon- IS 228 or any other established instrumental /Chemical method)	-
9 (Freedom from defects , IS 8952)	-
10 ,a) (Macro examination - IS 11371)	-
11,12 (Dimensions & Tolerance)	-
Clause 4,7.1 (Aluminium)	-
Clause 4,7.1 (Titanium)	-
4,7.1 Table 1 (Manganese- IS 228 or any other established instrumental /Chemical method)	-
9 (Freedom from defects , IS 8952)	-
10 ,a) (Macro examination - IS 11371)	-
11,12 (Dimensions & Tolerance)	-
10 ,c) (Inclusion content - IS 4163)	-

-
Chem- Facility not available for Nb, V, Ti & Al. Grades to be declared

11413

BIS, Northern Regional Laboratory (NRL)

None

IS 3650 (1981)

Specification for combination side cutting pliers (Second Revision)

- View breakup
Rs 2850/- + Materials as per respective ISS Excluding Hard Wire Cutting Test, Soft Wire Cutting Test, Torsion Test, Handle Load Test and Bend Test

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 Table 1 (Dimensions- L)	-
3 Table 1 (Dimensions- a)	-
3 Table 1 (Dimensions- b)	-
3 Table 1 (Dimensions- c1)	-
3 Table 1 (Dimensions- e)	-
3 Table 1 (Dimensions- h)	-
3 Table 1 (Dimensions- h1)	-
3 Table 1 (Dimensions- t)	-
4 (Hardness- Near cutting edges)	-
4 (Hardness- Body gripping surfce)	-
3 Table 1 (Dimensions- t)	-

-
Excluding Tortion , handle load, bend test and Hard wire cutting test

11414

BIS, Central Laboratory (CL)

None

IS 4398 (1994)

Carbon - Chromium steel for the manufacture of balls, rollers and bearing races - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

11415

BIS, Central Laboratory (CL)

None

IS 10243 (1993)

2,4 - D ethyl ester EC- Specificationn (First Revision)

Rs.2750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2 (Description)	-
3.3 (Identity Test)	-
3.4.1 (Cold Test)	-
3.4.2 (Flash Point (Abel))	-
3.4.3 (Emulsion Stability)	-
3.5.1 (2,4-D Ethyl Ester EC content)	-
3.5.2 (Fee 2,4-D)	-

-
-

11416

BIS, Western Regional Laboratory (WRL)

None

IS 1029 (1970)

Specification for hot-rolled steel strip (Baling) (First Revision)

Rs.750/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.4 (Sulphur -IS 228 or method specified in relevant ISO standard)	-
Cl.4 (Phosphorus -IS 228 or method specified in relevant ISO standard)	-

-
-

11417

BIS, Central Laboratory (CL)

None

IS 4397 (1999)

Cold - Rolled carbon steel strips for ball and roller bearing cages retainers - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 5.2, 6.1, 6.1.1, 6.2 Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

11418

BIS, Central Laboratory (CL)

None

IS 4224 (1972)

Specification for steel wire for staples, pins and clips (First Revision)

525 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.1, Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

11419

BIS, Central Laboratory (CL)

None

IS 4223 (1975)

Steel Wire For Umbrella Ribs

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.1 (Sulphur- Appropriate parts of IS 228.)	-
Cl 6.1 (Phosphorus- Appropriate parts of IS 228.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

11420

BIS, Northern Regional Laboratory (NRL)

None

IS 5986 (2017)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 9 (Press)	-
Cl 10 (Sudden Load Applied)	-
Cl 11 (Expansion Test)	-
Cl 14 (Weldability)	-
Cl 15 (Length, Width & Thickness)	-
Cl 13 (Workmanship)	-
7.1 (Carbon %)	-
7.1 (Manganese %)	-
7.1 (Phosphorus %)	-
7.1 (Sulphur %)	-
7.1 (Silicon %)	-
7.1 (CE)	-
7.1 ( Nitrogen%)	-

-
Excluding Microalloying Elements

11421

BIS, Western Regional Laboratory (WRL)

None

IS 15961 (2012)

Hot dip aluminium - Zinc alloy metallic coated steel strip and sheet (Plain)

Rs.4990 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 9 & Table 2 (Workmanship)	-
Cl 12 (Weight)	-
Cl 10 (Coating Adhesion )	-
Cl 13 (Length, Width, Thickness, Camber, Deviation From Squareness & Deviation From Flatness)	-
Cl 11 (Workmanship)	-
Cl. 13.7 (Deviation from Flatness (Steepness))	-
Cl. 13.6 (Deviation from Squareness (Out of Square))	-
Cl. 13.5 (Camber)	-
4, 5 (CARBON)	-
4, 5 (SULPHUR)	-
4, 5 (PHOSPHURS)	-
4.5 (MANGANESE)	-
Clause 9 (Coating Test (Triple Spot Test) (Total Both Surface))	-
Clause 9 (Coating Test (Single Spot Test) (Total Both Surface))	-
Clause 9 (Coating Test (Single Spot Test) (One Surface))	-

-
-

11422

BIS, Central Laboratory (CL)

None

IS 3975 (1999)

Low carbon galvanized steel wires, formed wires and tapes for armouring of cables - Specification (Third Revision)

Rs 2700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 6.1, Table-1 (Sulphur)	-
Clause 6.1, Table-1 (Phosphorus)	-
7 (Dimensions)	-
11 (Freedom from defects)	-
9.1 (Galvanizing Requirements )	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.2 (Mechanical Properties (as per IS 1717))	-
8.3 (Mechanical Properties (as per IS 1755))	-
14 (Marking)	-
14 (a) (Marking)	-
14 (b) (Marking)	-
14 (c) (Marking)	-
14 (d) (Marking)	-
14 (e) (Marking)	-
14 (f) (Marking)	-
14 (g) (Marking)	-
14.2 (Marking)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
7 (Dimensions)	-
11 (Freedom from defects)	-
9.1 (Galvanizing Requirements )	-
9.2 (Galvanizing Requirements )	-
9.3 (Galvanizing Requirements )	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.1 (Mechanical Properties (as per table 5 of IS 1608))	-
8.2 (Mechanical Properties (as per IS 1717))	-
8.3 (Mechanical Properties (as per IS 1755))	-
8.4 (Mechanical Properties (as per IS 10810(Part- 42)))	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding Except coating;

11423

BIS, Central Laboratory (CL)

None

IS 11646 : Part 2 (1986)

Specification for cane for visually handicapped: Part 2 folding type

Rs 4350/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2 (. Shape and Dimensions - As shown in Fig. 1.)	-
3.1 (Shaft/Tube)	-
3.2 (Grip)	-
3.3 (Tip)	-
3.4 (Coating)	-
3.5 (Inner Element)	-
2 (. Shape and Dimensions - As shown in Fig. 1.)	-
4.2 (GripThe grip may preferably be made of rubber compound. It may be moulded as shown in Fig. 1. The moulded grip shall have broader end at the top and gradually tapering at the lower end. The grip shall have flat surface in one bf the segment and the remaining portion may have a few ( 2 or 3 ) serrations for better grip. The weight of the grip shall be 70 to 90 g and length 175 to 225 mm. The grip shall be fixed on one end of the shaft with a strong adhesive. The hollowness may be filled in with a plastic button peg. The grip may have an elastic loop for handle at the top of)	-
4.1 (Shaft shall be made of tube of high tensile strength and ductility. The wall thickness of the tu-bes shall be minimum of 1 mm and outside~diameter of the tube at the centre shall be 12’5 mm minimum. The total length of the cane shall vary between 1 000 and 1 450 mm in steps of 50 mm.There may be 2 to 4 shafts which make it foldable)	-
4.3 (Ths tip may be made from suitable plastics as applicable to plastics for gear specified in IS : 7078-1973 ‘Specification for plastics used in instrument industry’ or any other material having property of good auditory impulse. The length of the tip outside the cane shall be 30 to 50 mm. The tip may have a peg hole at one end which shall be fixed into the other end of the shaft by either inserting or screwing it into the tube. The diameter of the tip shall be 12’5 mm minimum, and maybe half round at the bottom.)	-
4.4 ( Joints - The joints shall be such that it shall be easily fittable after disassembling. The joints may~be of taper type or peg type. In case of taper joint one end of the shaft is tapering and the other is done shaped. In case of peg type joint, either one end of the shaft is reduced in diameter by turning or a peg button is tightly fixed in the shaft to enable it to be fitted it in the female end of the shaft. The male and female parts shall fit into each other firmly (see Fig. 3 ). The shaft shall remain attached to when a single or double elastic cord is passed through. The elastic cord shall be fixed at the grip and the other end at the peg hold at the tip.)	-
5 (. Workmanship and Finish)	-
6.1 ( Endurance Test)	-

-
-

11424

BIS, Central Laboratory (CL)

None

IS 8708 (2006)

Mancozeb wettable powder - Specification (First Revision)

Rs 3900/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1 (Description)	-
3.2.2 (Sieving Requirement)	-
3.2.3 (Suspensibility)	-
3.2.4 (Wettability)	-
3.3.1 (Mancozeb Content)	-
3.3.2 (Zinc Content)	-
3.3.3 (Manganese Content)	-

-
Excluding Cl. 3.3.2 & Cl. 3.3.3 Zinc & Manganese Content;

11425

BIS, Northern Regional Laboratory (NRL)

None

IS 459 (1992)

Corrugated and semi - Corrugated asbestos cement sheets - Specification (Third Revision)

Rs.1275.00 View breakup
Hence, testing charges (rounded to nearest Rs. 50.00) for the product is : 6000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Depth of Corrugation, D - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Pitch of Corrugation, P - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Overall width, B - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Effective Width, C - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Nominal Thickness, T - Cl. 5)	-

-
Excluding load bearing test

11426

BIS, Central Laboratory (CL)

None

IS 3885 : Part 2 (1992)

Steel for the manufacture of laminated springs (Railway Rollingstock): Part 2 rib and groove sections (Second Revision)

Rs. 900 Chemical View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.1, 6.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm; Excluding Except vanadiium as per table 1;

11427

BIS, Central Laboratory (CL)

None

IS 3885 : Part 1 (1992)

Steel for the manufacture of laminated springs (Railway Rolling Stock): Part 1 flat sections - Specification (Second Revision)

Rs. 975/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 3.1, 6.1 & Table 1 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 3.1, 6.1 & Table 1 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

11428

BIS, Northern Regional Laboratory (NRL)

None

IS 12109 (1987)

General requirements for light duty sewing machine heads for industrial use

Rs 5880/- + Materials as per respective ISS View breakup
Rs 5880/- + Materials as per respective ISS

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
2.5 (Construction and Function)	-
6.2 Table 1 (Accuracy Requirement Needle Bar - Measuring Condition - Needle bar at lowermost position)	-
6.2 Table 1 (Accuracy Requirement Needle Bar - Measuring Condition - Needle bar at lowermost position)	-
6.2 Table 1 (Accuracy Requirement Thread takeup lever - Measuring Condition - Thread take up lever at top and intermediate position of motion)	-
6.1 (Accuracy Requirement)	-
6.2 Table 1 (Accuracy Requirement Thread takeup lever - Measuring Condition - Thread take up lever at top and intermediate position of motion)	-
6.2 Table 1 (Accuracy Requirement Rotating hook- Measuring Condition - With bobbin-case removed, play of rotating hook bobbin case holder )	-
6.2 Table 1 (Accuracy Requirement Rotating hook- Measuring Condition - With bobbin-case removed, play of rotating hook bobbin case holder )	-
7 Table 1 (Durability Requirements Feed machanlsm- Measuring Condition - Feed dog at the highest position above the needle plate )	-
7 Table 1 (Durability Requirements Rotating hook- Measuring Condition - With bobbin-case removed, play of rotating hook bobbin case holder )	-
7 Table 1 (Durability Requirements Arm shaft - Measuring Condition - Shaft end )	-
7 Table 1 (Durability Requirements Rotating hook shaft- Measuring Condition - Shaft end )	-
8 Table 2 (Sewing Requirement)	-
8 Table 3 (Sewing Requirement)	-
8 Table 2 (Sewing Requirement)	-
8 Table 2 (Sewing Requirement)	-
8 Table 2 (Sewing Requirement)	-
2.5 (Construction and Function)	-
2.1 (Construction and Function)	-
2.3 (Construction and Function)	-
2.4 (Construction and Function)	-
2.6 (Construction and Function)	-
2.7 (Construction and Function)	-
3.1 (Finish)	-
3.2 (Finish)	-
5 (Lubrication)	-
10 (Marking)	-
10 (Marking)	-
3.1 (Finish)	-

-
Test facility is complete

11429

BIS, Northern Regional Laboratory (NRL)

None

IS 362 (1991)

Parliament Hinges -specification

Please see remarks. View breakup
Rs.2250/- and material testing charges as per relevant referred Iss

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-A)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-B)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-C)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-D)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-d)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-E)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-Thickness of Flap)	-
5.1-Table 4 (Dimensions for Mild Steel Parliament Hinges-A)	-
5.1-able 3 (Dimensions for Cast Brass Parliament Hinges-B)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-C)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-D)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-d)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-E)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-Thickness of Flap)	-
6.1 (MANUFACTURE-General)	-
6.1 (MANUFACTURE-General)	-
6.1 (MANUFACTURE-General)	-
6.2 (MANUFACTURE-Knuckles)	-
6.2 (MANUFACTURE-Knuckles)	-
6.2 (MANUFACTURE-Knuckles)	-
6.2 (MANUFACTURE-Knuckles)	-
6.3 (MANUFACTURE-Pins)	-
6.3 (MANUFACTURE-Pins)	-
6.3 (MANUFACTURE-Pins)	-
6.3 (MANUFACTURE-Pins)	-
6.4 (MANUFACTURE-Screw Holes)	-
6.5 (MANUFACTURE-Position of Holes)	-
6.5 (MANUFACTURE-Position of Holes)	-
6.5 (MANUFACTURE-Position of Holes-minimum distance from the ends of the flap)	-
6.5 (MANUFACTURE-Position of Holes-minimum distance from the inner edge)	-
6.5 (MANUFACTURE-Position of Holes)	-
7.1 (FINISH)	-
7.3 (FINISH)	-

-
Facility for chemical testing is not available

11430

BIS, Western Regional Laboratory (WRL)

None

IS 15778 (2007)

Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification

6375 View breakup
Rs. 6375/- excluding composition, effect on water, hydrostatic characteristics and thermal stability by hydrostatic pressure testing.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 IS 12235 (Part 1) Table 2 (Dimension of Pipes: Mean outside Diameter)	-
7.1,7.1.1 IS 12235 (Part 1) Table 2 (Outside Diameter at any point)	-
7.1.2 IS 12235 (Part 1) Table 2 (Wall Thickness )	-
9.2 IS 12235 (Part 3) (Opacity)	-
9.4 IS 12235(Part 5/Sec 1 and Sec 2) (Reversion Test : When tested by the method prescribed in IS 12235(Part 5/Sec 1 and Sec 2), a length of pipe 200 + 20 mm long shall not alter in length by more than 5 percent.)	-
9.5 IS 12235(Part 2) (Vicat Softening Temperature: When tested by the method prescribed in IS 12235(Part 2), the Vicat softening temperature of the specimen shall not be less than 110°C.)	-
9.6 IS 12235(Part 14) (Density)	-
10.3 IS 4985 Table 4 (Resistance to External Blow at O°C: When tested by the method prescribed in IS 4985, with classified striker mass and drop height as given in Table 4, the pipe shall have a true impact rate of not more than 10 percent.)	-
10.4 IS 12235(Part 19) (Flattening Test)	-
10.5 IS 12235(Part 13) (Tensile Strength : When tested by the method prescribed in IS 12235(Part 13), the tensile strength at yield shall not be less than 50 MPaat 27±2°C. )	-
7.1,7.1.1 IS 12235 (Part 1) Table 2 (Outside Diameter at any point)	-
7.1.2 IS 12235 (Part 1) Table 2 (Wall Thickness )	-

-
The following test facilities are not available: (1) Verification of the Malfunction temperature Cl 6.3.2 (2) Effect on water Cl.9.3 (3) Hyd. characteristics Cl.10.1 for 165 Hr and 1000 Hr (4) thermal stability test.Cl.10.2

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number