BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

11993 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

11881

BIS, Patna Branch Laboratory (PBL)

None

IS 280 (2006)

Mild steel wire for general engineering purposes (Fourth Revision)

Rs.3750.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 7 & Table 1 (Diameter & Difference Between Two Reading On Any Two Diameters)	-
Cl 9 (Tensile Test On UTM)	-
Cl 11 (Workmanship)	-
Cl 13 (Workmanship)	-
6 AND AS PER IS 7887 (PHOSPHORUS)	-
6 AND AS PER IS 7887 (SULPHUR)	-
6 AND AS PER IS 7887 (MANGANESE)	-
6 AND AS PER IS 7887 (SILICON)	-
6 AND AS PER IS 7887 (CARBON)	-
9.2 (Wrapping Test)	-
9.3 (Bend test)	-
10 (Finish)	-
11 (Coating test)	-
13 (Freedom from defects)	-
11 (Coating test)	-

-
All test facilities are available as per the IS except tests for Aluminium and Copper (Clause 6)

11882

BIS, Patna Branch Laboratory (PBL)

None

IS 253 (2014)

Specification for common salt (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause -3 for common salt 3.1 ( 3.1.1 ) ( The material shall be crystalline solid, white or pale pink or light grey in colour.)	-
Clause -3 for common salt 3.1 ( 3.1.2 ) Annex-2 (Moisture The material shall contain not more than 6.0 percent by mass of moisture, on as received basis, when tested according to the method given in A-2)	-
Clause-3.2 for dairy salt (3.2.1) (The material shall be crystalline white solid and free from any visible impurities.)	-
Clause-3.1 for dairy salt (3.2.2) (3.2.2 Particle Size 99 percent by mass of the material shall pass completely through 850-micron IS Sieve [see IS 460 (Part I)].)	-
Clause-3.2 for dairy salt (3.2.3) Annex -2 (3.2.3 Moisture The material shall contain not more than 0.5 percent by mass of moisture, on as received basis, when tested according to the methods given in A-2.)	-
Table 1 (i) Annex -4 (Water insoluble matter, common)	-
Table 1 (i) Annex -4 (Water insoluble matter, Dairy)	-
Table 1 (ii) Annex-5 (Chloride content (as NaCl)common)	-
Table 1 (ii) Annex-5 (Chloride content (as NaCl), Dairy)	-
Table 1 (iii) Annex-6 ( Matter soluble in water, other than sodium chloride, common)	-
Table 1 (iii) Annex-6 ( Matter soluble in water, other than sodium chloride, Dairy)	-
Table 1 (iv) (Calcium (as Ca), water soluble, percent by mass, common)	-
Table 1 (iv) Annex-7 (Calcium (as Ca), water soluble, percent by mass, Dairy)	-
Table 1 (v) (Magnesium (as Mg), water soluble, percent by mass, common )	-
Table 1 (v) Annex-7 (Magnesium (as Mg), water soluble, percent by mass, Dairy )	-
Table 1 (vi) (Sulphate as SO2 percent by mass, common)	-
Table 1 (vi) Annex-8 (sulphate as SO2 percent by mass, Dairy)	-
Table 1 (vii) Annex-9 (Alkalinity (as Na2CO3), common)	-
Table 1 (vii) Annex-11 (Alkalinity (as Na2CO3), Dairy)	-
Table 1 (ix) (Iron (as Fe), common)	-
Table 1 (ix) (Iron (as Fe), Dairy)	-
Table 1 (xi) Annex-12 (Copper (as Cu), common)	-
Table 1 (xi) Annex-12 (Copper (as Cu), Dairy )	-
Table 1 (x) Annex-11 (x) Arsenic (as As), common)	-
Table 1 (x) Annex-11 (x) Arsenic (as As),Dairy)	-

-
All test facilities are available as per the IS except tests for Lead (Clause 3.1.4)

11883

BIS, Patna Branch Laboratory (PBL)

None

IS 2124 (2000)

Sodium bicarbonate - Specification (Second Revision)

Rs 4660/- for Pure Grade View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Grade)	-
4.1 (Description)	-
4.2 (Table 1 S.no.(i)) (Total Alkalinity (as NaHCO3))	-
4.2 (Table 1 S.no.(i)) (pH )	-
4.2 (Table 1 S.no.(ii)) (Chlorides (as Cl))	-
4.2 (Table 1 S.no.(iii)) (Insoluble matter)	-
4.2 (Table 1 S.no.(iv)) (Sulphates (as SO4))	-

-
All test facilities are available as per the IS

11884

BIS, Patna Branch Laboratory (PBL)

None

IS 1507 (1977)

Specification for copper oxychloride water dispersible powder concentrates

Rs 2700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.2.1 (Description)	-
Cl. 2.3, Table-1 (pH of one percent aqueous dispersion)	-

-
All test facilities are available as per the IS

11885

BIS, Southern Regional Laboratory (SRL)

None

IS 459 (1992)

Corrugated and semi - Corrugated asbestos cement sheets - Specification (Third Revision)

- View breakup
Hence, testing charges (rounded to nearest Rs. 50.00) for the product is : 6000.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5, Table 1 (Dimensions & Tolerances - Type of Sheet - cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Depth of Corrugation, D - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Pitch of Corrugation, P - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Overall width, B - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Effective Width, C - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Nominal Thickness, T - Cl. 5)	-
5, Table 1, Figure 1,2 (Dimensions & Tolerances - Length of Sheet, A - Cl. 5)	-
6.1 (Load Bearing Capacity Test - Cl. 6.1, IS 5913)	-
7 (General Appearance and Finish - Cl. 7.1)	-
7 (General Appearance and Finish - Cl. 7.2)	-
12 (Marking - Indication of source of manufacture - Cl. 12)	-
12 (Marking - Year & Date of manufacture - Cl. 12)	-
12 (Marking - Pictorial warning signs as given in IS 12081 (Part 2) : 1987 - Cl. 12)	-

-
" 03 nos. " Excluding optional tests,colouring matter

11886

BIS, Patna Branch Laboratory (PBL)

None

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

Rs.8420/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985)	-
6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985)	-
6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-
6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985)	-
6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985)	-
6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-
7 -Table 2- i (Fineness 4031 Part 2)	-
7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-
7 -Table 2- ii- a (Expansion after aeration - 4031 Part 3)	-
7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3)	-
7 -Table 2- ii- b (Expansion after aeration- 4031 Part 3)	-
7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
7 -Table 2-iii- b (Setting Time Final- 4031 Part 5)	-
7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10)	-

-
All test facilities are available as per the IS except Transverse Strength Test (Clause 7 and Table-2) which is an optional test

11887

BIS, Patna Branch Laboratory (PBL)

None

IS 1148 (2009)

Steel Rivet Bars (medium And High Tensile)--For Structural Purposes--For Structural Purposes

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 6 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl. 6 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
7 (FREEDOM FROM DEFECTS)	-
8 ( LENGTHS)	-
9 (DIMENSIONAL TOLERANCES)	-
11 (Tensile Test-1608:Part 1)	-
11 (Yield Strength, Mpa)	-
11 (Tensile Strength, Mpa)	-
11 (Elongation, %)	-
12 (Bend Test-1599)	-

-
All test facilities are available as per the IS except- i. Tests for microalloying elements (Nb, V, Ti and B) and Aluminium (Clause 6.2) ii. Shear Test (Clause 13) iii. Hot Compression Test (Clause 14)

11888

BIS, Patna Branch Laboratory (PBL)

None

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8, Table 5 & 6 (Tensile Strength)	-
Cl 12 (Workmanship)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-
6.1 ( Nitrogen%)	-
8, Table 5 & 6 (Yield Strength)	-
8, Table 5 & 6 (Elongation)	-
Clause 10 (Cuppping Test)	-
Clause 12 (Freedom from defect)	-
Clause 13 (Length)	-
14 (Calculation of weight)	-
Cl.13 (Out of square)	-
Cl.13 (Flatness)	-
Cl.13 (Camber)	-
Cl.13 (Width)	-
Cl.13 (Thickness)	-

-
All test facilities are available as per the IS except- i. Cupping Test (Clause 10) ii. Chemical tests for Boron, Titanium, Niobium, Vanadium, Aluminium and Copper (Clause 7.2)

11889

MSME TESTING CENTRE (WR), MUMBAI

7119404

IS 651 (2007)

Glazed stoneware pipes and fittings - Specification (Sixth Revision)

Class: SP1, SP2 & SP3

9500 View breakup
Complete test charges

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(GENERAL QUALITY)	-	500	Visual inspection
7.2(Hydraulic Test)	-	2500	Hydraulic Test
7.3(Absorption Test)	-	1500	Absorption Test
Clause 7.4(Acid Resistance Test)	-	1000	Test for Acid Resistance
Clause 7.5(Alkali Resistance Test)	-	1000	Test for Alkali Resistance

-
-

11890

BIS, Patna Branch Laboratory (PBL)

None

IS 10748 (2004)

Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 & Table 3 (UTM)	-
Cl 9 (Press)	-
Cl 11 (Workmanship)	-
Cl 12 & 13 (Length, Width & Thickness)	-
7.1 (Carbon %)	-
7.1 (Manganese %)	-
7.1 (Phosphorus %)	-
7.1 (Sulphur %)	-
Cl. 8, Table 3 (Yield Stress)	-
Cl. 14 (Weight)	-
Cl. 12, 13 (Camber)	-
Cl. 12, 13 (Thickness)	-
Cl. 8, Table 3 (Elongation)	-
7.1 (Silicon %)	-
7.1 (CE)	-
7.1 ( Nitrogen%)	-

-
All test facilities are available as per the IS except chemical tests for Chromium, Molybdenum,Vanadium, Nickel, Copper, Niobium, Boron, Titanium, Aluminium and Tungsten (Clause 7.2)

11891

BIS, Patna Branch Laboratory (PBL)

None

IS 1038 (1983)

Specification For Steel Doors, Windows And Ventilators

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1. (Size-Height)	-
4.1 (Size-Width)	-
4.3 (Designation)	-
6.1 (Frames)	-
6.1.1.1 (Visual Inspection Test)	-
6.2 (Side Hung Shutter)	-
6.2 (Side Hung Shutter)	-
6.2 (Side Hung Shutter- Thickness of hinge)	-
6.2 (Side Hung Shutter- Pin diameter)	-
6.2 (Side Hung Shutter-Width of hinge)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate- Thicknesss of handle)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate-Height of handle plate)	-
6.2.3 (Peg Stay - Thickness)	-
6.2.3 (Peg Stay - Dimensions-A)	-
6.2.3 (Peg Stay - Dimensions-B)	-
6.2.3 (Peg Stay - Dimensions-C)	-
6.2.3 (Peg Stay - Dimensions-D)	-
6.2.3 (Peg Stay - Dimensions-E)	-
6.2.3 (Peg Stay - Dimensions-F)	-
6.2.3 (Peg Stay - Dimensions-G)	-
6.2.3 (Peg Stay - Dimensions-H)	-
6.2.3 (Peg Stay - Dimensions-J)	-
6.2.3 (Peg Stay - Dimensions-K)	-
6.2.3 (Peg Stay - Dimensions-L)	-
6.2.3 (Peg Stay - Dimensions-M)	-
6.3 (Top Hung Ventilator)	-
6.3 (Top Hung Ventilator-Thickness of hinge)	-
6.3 (Top Hung Ventilator-Pin diameter)	-
6.3 (Top Hung Ventilator-Width of hinge)	-
7.1 (Position of Holes)	-
7.2 Table 2 (Position of Fixing Screws)	-
7.2 Table 2 (Lugs-A)	-
7.2 Table 2 (Lugs-B)	-
7.2 Table 2 (Lugs-C)	-
7.2 Table 2 (Lugs-D)	-
7.2 Table 2 (Lugs-E)	-
7.2 Table 2 (Lugs-F)	-
7.2 Table 2 (Lugs-G)	-
8 (Finish)	-
9 (Glazing)	-
9 (Glazing- No of glazing clip against each plate)	-

-
All test facilities are available as per the IS

11892

BIS, Southern Regional Laboratory (SRL)

None

IS 13422 (1992)

Disposable surgical rubber gloves specification

Rs.6900.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.4 (Sterility)	-
4 (TYPES)	-
5.2.1 (General Characteristics and Dimensions)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Length)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Width)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Thickness of Finger)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Thickness of Palm)	-
5.2.2 and Table 1 Fig. 1 (Dimensions - Thickness of Cuff)	-
5.3 and Table 2 ( Tensile Strength Before Ageing)	-
5.3 and Table 2 ( Elongation at Break Before Ageing)	-
5.3 and Table 2 (Stress at 500% Elongation at Break Before Ageing)	-
5.3 and Table 2 ( Tensile StrengthAfter Accelerated Ageing)	-
5.3 and Table 2 ( Elongation at Break After Accelerated Ageing)	-
5.5 (Airtight Test)	-

-
" Mech - 25 pairs, Micro - 3 pairs "

11893

BIS, Northern Regional Laboratory (NRL)

None

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.2.5 (Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-
9.2.5 (Modulus of elasticity - AVERAGE - Annexure K)	-
9.2.5 (Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-
9.2.5 (Modulus of rupture - AVERAGE - Annexure K)	-
9.2.4 (Mycological Test [for MR grade only] - Annexure J)	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-
9.2.1 (Dimensional Changes caused by humidity - Delamination - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-
7.3 (Dimensional Requirements - Variation in thickness - Annexure E)	-
7.3 (Dimensional Requirements - Squareness - Annexure D)	-
7.3 (Dimensional Requirements - Edge Straightness - Annexure D)	-
7.3 (Dimensional Requirements - Thickness - Annexure E)	-
7.3 (Dimensional Requirements - Width - 8.1.4)	-
7.3 (Dimensional Requirements - Length - 8.1.4)	-
8.1.3, 6.3.3, IS 1328 (Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-
8.1.3, 6.3.3, IS 303 (Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-
9.2.6 (Spot test - Annexure L)	-
8.1.3, 6.3.3, IS 1328 (Visual Inspection - Permissible Defects - IS 1328 [test method for DECORATIVE type])	-
8.1.3, 6.3.3, IS 303 (Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-
9.2.6 (Spot test - Annexure L)	-
9.2.3 (Adhesion of Plies - Annexure H)	-
9.2.1 (Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-
9.2.6 (Spot test - Annexure L)	-
9.2.6 (mechanical) (Spot test - Annexure L)	-

-
Test facility is complete

11894

BIS, Southern Regional Laboratory (SRL)

None

IS 13334 : Part 2 (2014)

Skimmed milk powder - Specification: Part 2 extra grade (First Revision)

EXTRA GRADE

Rs 10430/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table 1 (ix) (Bacterial count (IS 5402))	-
Table 1 (x) (Coliform count (IS 5401 - Part 1))	-
Table 1 (xi) (Escherichia coli (IS 5887 - Part 1))	-
Table 1 (xii) (Coagulase positive Staphylococcus aureus (IS 5887 - Part 2))	-
Table 1 (xiii) (Salmonella (IS 5887 - Part 3))	-
Table 1 (xiv)(a) (Spore Count: a)Aerobic (Bacillus cereus) Type m (IS 5887 - Part 6))	-
Table 1 (xiv)(b) (Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type m (ISO 15213 : 2003))	-
Table 1 (xiv)(b) (Spore Count: b) Anaerobic (Sulfite reducing Clostridia) Type M (ISO 15213 : 2003))	-
Table 1 (xv) (Listeria monocytogenes (IS 14988 - Part 2 : 2001))	-
Table 1 (i) (Moisture (IS 116231or 16072))	-
Table 1 (ii) (Milk protein in milk solids not fat (IS 72192))	-
Table 1 (iii) (Milk fat (IS 117213) or Annex B)	-
Table 1 (iv) (Insolubility index (IS 12759))	-
Table 1 (v) (Total ash (on dry basis), Annex B of IS 14433)	-
Table 1 (vi) (Titratable acidity (IS 11766))	-
Table 1 (viii) (Scorched particles (equivalent to Disc B) (IS 13500))	-

-
2X500g Excluding Except Lactate Content

11895

BIS, Eastern Regional Laboratory (ERL)

None

IS 398 : Part 5 (1992)

Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision)

All sizes/varieties

11400 View breakup
Excluding Breaking load on complete conductor, Surface condition test, Corona test and Radio interference test

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (elec) (Freedom from defects)	-
13.5.1 Table 3 (elec) (Breaking Load on Complete conductor)	-
13.5.2 Table 1 (elec) (Breaking Load of Aluminium Wires Before Stranding)	-
13.5.2 Table 2 (elec) (Breaking Load of Steel Wires Before Stranding)	-
13.5.2 Table 1 (elec) (Breaking Load of Aluminium Wires After Stranding)	-
13.5.2 Table 2 (elec) (Breaking Load of Steel Wires After Stranding)	-
13.6.1 (elec) (Ductility by Torsion Test before stranding)	-
13.6.1 (elec) (Ductility by Torsion Test after stranding)	-
13.6.2 (elec) (Ductility by Elongation Test before stranding)	-
13.6.2 (elec) (Ductility by Elongation Test after stranding)	-
13.7.1 (elec) (Wrapping Test Aluminium Wires Before Stranding)	-
13.7.1 (elec) (Wrapping Test Aluminium Wires After Stranding)	-
13.7.2 (elec) (Wrapping Test Galvanized Steel Wires Before Stranding)	-
13.7.2 (elec) (Wrapping Test Galvanized Steel Wires After Stranding)	-
13.8 (elec) (Resistance test-Aluminium wire before Stranding)	-
14.8 (elec) (Resistance test-Aluminium wire after stranding)	-
13.9.2 (elec) (Mass of Zinc coating)	-
10.4 (elec) (Direction of lay)	-
13.4 Table-4 (elec) (Lay Ratio- Aluminium Wire Outermost Layer)	-
13.4 Table-4 (elec) (Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-
13.4 Table-4 (mech) (Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-
13.4 Table-4 (elec) (Lay Ratio- Steel Core (6 Wire Layer))	-
13.3 Table-2 (elec) (Diameter-Galvanized Steel wires)	-
13.3 Table-1 (elec) (Diameter-Aluminium wires)	-
13.10 (elec) (Surface condition test)	-
13.11 (elec) (Corona Test)	-
13.12 (elec) (Radio Interference Voltage Test)	-
13.4 Table-4 (elec) (Lay Ratio- Steel Core (6 Wire Layer))	-
8.2.2 (elec) (Resistance of complete conductor)	-
13.2 (elec) (Visual Examination)	-
13.4 Table-4 (elec) (Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-

-
Elec-Facility not available for surface condition,corona test ,radio interference test, Breaking Load on complete conductor.

11896

BIS, Northern Regional Laboratory (NRL)

None

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 18 (Weight)	-
Cl 15 (Length, Width & Thickness)	-
Cl 11.3 (Press)	-
Cl 10.3 (UTM)	-
Cl 7 (Workmanship)	-
Cl 7 (Workmanship)	-
Cl 7 (Workmanship)	-
Clause - 5, 8.1 & 8.2 (E250, CARBON)	-
Clause - 5, 8.1 & 8.2 (E250, SULPHUR)	-
Clause - 5, 8.1 & 8.2 (E250, SILICON)	-
Clause - 5, 8.1 & 8.2 (E250 ,MANGANESE)	-
Clause - 5, 8.1 & 8.2 (E250, PHOSPHURS)	-
Clause - 5, 8.1 & 8.2 (E250, NITROGEN)	-
Clause - 5, 8.1 & 8.2 (E250, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E275, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E300, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E350, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E410, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E450, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E550, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E600, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E250, CARBON +EQUIVELENT )	-
Clause - 5, 8.1 & 8.2 (E410, NITROGEN)	-
Clause - 5, 8.1 & 8.2 (E410, SILICON)	-
Clause - 5, 8.1 & 8.2 (E450 ,MANGANESE)	-
Clause - 5, 8.1 & 8.2 (E410, PHOSPHURS)	-
Clause - 5, 8.1 & 8.2 (E410, SULPHUR)	-
Clause - 5, 8.1 & 8.2 (E410, CARBON)	-
Clause - 5, 8.1 & 8.2 (E410, CARBON +EQUIVELENT )	-
Cl. 15 (Cl. 15 Square Bar: Out of Square)	-
Cl. 15 (Cl. 15 Square Bar: Side Width: Minimum)	-
Cl. 15 (Cl. 15 Square Bar: Side Width: Maximum)	-
Cl. 15, 16 (Thickness )	-
Cl. 15, 16 (Toe Radius R2)	-
15 (Radius R1)	-
Cl. 15, 16 (Leg Length Difference (Angle))	-
Cl. 15, 16 (Leg Length B (Angle))	-
Cl. 15, 16 (Leg Length A (Angle))	-
Cl. 15, 16 (Camber (Angle))	-
Cl 13 (Y Groove Cracking Test)	-
Clause 12 (Impact Test)	-
Cl. 15, 16 (Flange Slope)	-
Cl. 15, 16 (Web Thickness)	-
Cl. 15, 16 (Flange Thickness)	-
Cl. 15, 16 (Out of Square (Flat))	-
Cl. 15, 16 (Width )	-
Cl. 15, 16 (Thickness )	-
10 (Tensile Strength-IS:1608(P1)-22)	-
10 (Yield Stress-IS:1608(P1)-22)	-
10 (Elongation on SoA 5.65mm GL)	-

-
-

11897

BIS, Eastern Regional Laboratory (ERL)

None

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

Complete facility available upto 100 sq mm only

Rs 825/- upto 7 wires, Rs 1425/- upto 19 wires View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Freedom from Defects)	-
7.2.2 Table-2, Table-4 (Calculated resistance of Stranded Conductor)	-
8.1 (Joints in wires-Conductors Containing Seven Wires)	-
8.2 (Joints in wires-Conductors Containing More Than Seven Wires)	-
9.2 Table 3 (Lay Ratio of stranded conductors)	-
9.3 (Direction of Lay)	-
9.4 (Multiple layers of wires)	-
12.2 Table 1 (Breaking Load Test- Before Stranding)	-
12.2 Table 1 (Breaking Load Test- After Stranding)	-
12.3 Table 1 (Elongation Test- Before Stranding)	-
12.3 Table 1 (Elongation Test- After Stranding)	-
12.4 Table 1 (Resistance of Aluminium wire)	-
11 (Packing and Marking)	-
7.1 Table-1 (Dimensional measurement of wires)	-
9.1 (Stranding)	-

-
Elec-Complete facility available upto 100 sq mm only. For Above 100 sq.mm. facility not available for Stress-Strain Test, Surface Condition, Ultimate B/L on stranded conductor.

11898

BIS, Central Laboratory (CL)

None

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

- View breakup
For category 01 Unsheathed cable: A Single Core, Plain Copper Conductor Rs. 10500/- B Single Core, Tinned Copper Conductor Rs.10800/- C Single Core, Solid Aluminium Conductor Rs.10200/- D Single Core, Stranded Aluminium ConductorRs.10200/- Sheathed Cable: A Single Core, Plain Copper Conductor Rs. 17550/- B Single Core, Tinned Copper Conductor Rs.17850/- C Single Core, Solid Aluminium ConductorRs.17250/- D Single Core, Stranded Aluminium Conductor Rs.17250/- For category 02 Unsheathed Cable: A Single Core, Plain Copper Conductor ?12150/- B Single Core, Tinned Copper Conductor ?12450/- C Single Core, Solid Aluminium Conductor ?11850/- D Single Core, Stranded Aluminium Conductor ?11850/- Sheathed Cable: A Single Core, Plain Copper Conductor ?18900/- B Single Core, Tinned Copper Conductor ?19200/- C Single Core, Solid Aluminium Conductor ?18600/- D Single Core, Stranded Aluminium Conductor ?18600/- For FR cables Unsheathed Cable: A Single Core, Plain Copper Conductor ?12600/- B Single Core, Tinned Copper Conductor ?12900/- C Single Core, Solid Aluminium Conductor ?12300/- D Single Core, Stranded Aluminium Conductor ?12300/- Sheathed Cable: A Single Core, Plain Copper Conductor ?19650/- B Single Core, Tinned Copper Conductor ?19950/- C Single Core, Solid Aluminium Conductor ?19350/- D Single Core, Stranded Aluminium Conductor ?19350/- For FR-LSH cables Unsheathed Cable A Single Core, Plain Copper Conductor ?13950/- B Single Core, Tinned Copper Conductor ?14250/- C Single Core, Solid Aluminium Conductor ?13650/- D Single Core, Stranded Aluminium Conductor ?13650/- Sheathed Cable: A Single Core, Plain Copper Conductor ?20820/- B Single Core, Tinned Copper Conductor ?21120/- C Single Core, Solid Aluminium Conductor ?20520/- D Single Core, Stranded Aluminium Conductor ?20520/- Material testing charges as per relevant referred Iss (For each of the above category). For multi core cable: for each additional core, the changes of single core unsheathed cable as per material (copper & aluminum) and as per construction of conductor (solid or standard, tinned or plain) shall be added

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Conductor - Material)	-
4.1 (Tensile test (for Al)-Before Stranding)	-
4.1 (Tensile test (for Al)- After Stranding)	-
4.1 (Annealing test (for copper))	-
4.1 (Wrapping test (for Al))	-
4.2 (Conductor resistance test)	-
5.1 (Insulation)	-
5.2 (Application )	-
5.3 (Thickness of Insulation)	-
6.1 (Filler)	-
6.2 (Filler)	-
7 (Binder Tape)	-
8.1 (Sheath Material )	-
8.3 (Thickness of Sheath)	-
9 (Overall dimensions)	-
9.1 (Ovality)	-
10.1 (HV (water immersion))	-
10.2 (HV (room temperature))	-
10.4 (Flammability test-Burning after flame removal)	-
10.4 (Flammability test- Unaffected portion)	-
10.9 (Additional ageing test (OU cables only) -HV test (at 60±3oC))	-
10.11 (Per sulphate test (for tinned Cu cable only))	-
11 (Identification)	-
11.1 (Durability)	-
11.2 (Legibility)	-
12 (CONSTRUCTION Core Identification)	-
Table 1 iii) c) 1) (Tensile strength (Without ageing))	-
Table 1 iii) c) 1) (Elongation (Without ageing))	-
Table 1 iii) c) 2) (Loss of mass- Insulation )	-
Table 1 iii) c) 3) (Tensile strength (After ageing))	-
Table 1 iii) c) 3) (TS variation)	-
Table 1 iii) c) 3) (Elongation (After ageing))	-
Table 1 iii) c) 3) (Elongation variation)	-
Table 1 iii) c) 4) (Shrinkage-Insulation)	-
Table 1 iii) c) 4) (Cracks Observed)	-
Table 1 iii) c) 5) (Heat shock-Insulation )	-
Table 1 iii) c) 6) (Hot deformation - Indentation depth- Insulation)	-
Table 1 iii) c) 7) (Thermal stability- Insulation )	-
Table 1 iii) c) 8) (Cold bend for insulation)	-
Table 1 iii) c) 9) (Cold impact for insulation)	-
Table 1 iii) d) 1) (Sheath -Tensile strength (Without ageing))	-
Table 1 iii) d) 1) (Sheath- Elongation (Without ageing))	-
Table 1 iii) d) 2) (Loss of mass- Sheath )	-
Table 1 iii) d) 3) (Sheath- Tensile strength (After ageing))	-
Table 1 iii) d) 3) (Sheath- TS variation)	-
Table 1 iii) d) 3) (Sheath- Elongation (After ageing))	-
Table 1 iii) d) 3) (Sheath- Elongation variation)	-
Table 1 iii) d) 4) (Shrinkage- Sheath )	-
Table 1 iii) d) 4) (Cracks Observed)	-
Table 1 iii) d) 5) (Heat shock-Sheath )	-
Table 1 iii) d) 6) (Hot deformation -Indentation depth - Sheath )	-
Table 1 iii) d) 7) (Thermal stability- Sheath )	-
Table 1 iii) d) 8) (Cold bend for sheath)	-
Table 1 iii) d) 9) (Cold impact for sheath)	-
table 1 e) 3) (Volume Resistivity - Room temp )	-
table 1 e) 3) (Volume Resistivity - Maximum temp)	-
table 1 e) 3) (IR constant- Room temp )	-
table 1 e) 3) (IR constant- max. Temp)	-
Table 1 iii) c) 8) (Cold bend for insulation)	-
Table 1 iii) c) 9) (Cold impact for insulation)	-
Table 1 iii) d) 8) (Cold bend for sheath)	-
Table 1 iii) d) 9) (Cold impact for sheath)	-
Table 1 (Category Code)	-
10.11 (Persulphate Test )	-
4.1 (Conductor - Material)	-
4.1 (Conductor - Material)	-
4.1 (Conductor - Material)	-
8 (SHEATH)	-
18 (SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-
4.1 (Material)	-
(4.3 of IS 8130:2013) (Form of Conductor)	-
( 4.4.1 of IS 8130:2013) (Joints in Conductor)	-
(4.4.2 of IS 8130:2013) (Joints in Conductor Solid Conductors (Aluminium Conductors only))	-
(Cl.6.1.1 of IS 8130:2013) (Solid Conductor (Class 1))	-
(Cl.6.1.2 of IS 8130:2013) (Solid Conductor (Class 1))	-
(Cl.6.1.3 of IS 8130:2013) (Solid Conductor (Class 1))	-
(6.2.1 of IS 8130:2013) (Stranded Circular Non-compacted Conductors (Class 2))	-
(6.2.2 of IS 8130:2013) (Stranded Circular Non-compacted Conductors (Class 2))	-
(6.2.3 of IS 8130:2013) (Stranded Circular Non-compacted Conductors (Class 2))	-
(6.3.1 of IS 8130:2013) (Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-
(6.3.2 of IS 8130:2013) (Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-
(6.3.3 of IS 8130:2013) (Stranded Compacted Circular Conductors and Shaped Conductors (Class 2))	-
( 6.4.1 of IS 8130:2013) (Flexible Conductors (Class 5))	-
(6.4.2 of IS 8130:2013) (Flexible Conductors (Class 5))	-
( 6.4.3 of IS 8130:2013) (Flexible Conductors (Class 5))	-
Cl.19.1.4 (Assembly of Cores)	-
Cl. 8.2 (Application of Sheath)	-

-
Test facility not available for FR, FR-LSH category.

11899

BIS, Northern Regional Laboratory (NRL)

None

IS 2202 : Part 1 (1999)

Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision)

- View breakup
Rs. 37654/- for type tests Rs. 8304/- for acceptance test Material testing charges to be levied as per relevant referred Iss.

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11.1 (Height - IS 4020 (Pt-2))	-
11.1 (Width- IS 4020 (Pt-2))	-
11.1 (Thickness - IS 4020 (Pt-2))	-
11.1 ( Squareness Test - IS 4020 (Pt-2))	-
11.2 ( Twist, cupping & wrapping - IS 4020 (Pt-3))	-
11.3 (Depth of deviation - IS 4020(Pt-4))	-
11.4 (Impact Indentation Test - IS 4020(Pt-5))	-
11.4 (Depth of indentation - IS 4020(Pt-5))	-
11.5 (Deflection at maximum load - IS 4020(Pt-6))	-
11.5 (Residual deflection - IS 4020(Pt-6))	-
11.6 (Deflection of the edge at maximum load - IS 4020(Pt-7))	-
11.6 (Residual deflection after removal of load - IS 4020(Pt-7))	-
11.6 (Lateral buckling during loading - IS 4020(Pt-7))	-
11.6 (Residual lateral buckling - IS 4020(Pt-7))	-
11.8 (Buckling Test - IS 4020(Pt-9))	-
11.8 (Initial deflection - IS 4020(Pt-9))	-
11.8 (Residual deformation after 15 minutes of unloading - IS 4020(Pt-9))	-
11.9 (Slamming Test - IS 4020(Pt-10))	-
11.1 (Misuse Test - IS 4020(Pt-11))	-
11.11 (Varying Humidity Test - IS 4020(Pt-12))	-
11.11 (Maximum departure from the general planeness - IS 4020(Pt-12))	-
11.11 (The recovery of the original size after subjecting the door to high and low humidity- IS 4020(Pt-12))	-
11.14 (Glue Adhesion Test - IS 4020(Pt-15))	-
11.15 (Screw Withdrawal Strength - IS 4020 (Pt-16))	-
6.2 (Plywood)	-
11.13 (Knife Test - IS 4020(Pt-14))	-
9.2 (Workmanship & finish - IS 2202(Pt-1))	-
9.3 (Workmanship & finish - IS 2202(Pt-1))	-
11.7 (Shock Resistance Test -IS 4020(Pt-8))	-
11.12 (End Immersion Test - IS 4020(Pt-13))	-
11.13 (Knife Test - IS 4020(Pt-14))	-
9.2 (Workmanship & finish - IS 2202(Pt-1))	-
9.3 (Workmanship & finish - IS 2202(Pt-1))	-
11.7 (Shock Resistance Test -IS 4020(Pt-8))	-
11.12 (End Immersion Test - IS 4020(Pt-13))	-
11.1 (Variation in thickness - IS 4020 (Pt-2))	-

-
Standard revised in 2023.Test facility is complete.

11900

BIS, Central Laboratory (CL)

None

IS 15658 (2006)

Precast concrete blocks for paving - Specification

Rs.15940/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.2.4 (WATER ABSORPTION TEST (Average for three test specimens))	-
6.2.5 (AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-

-
Excluding -; Abrasion Resistance Test a ( Dry & Wet)

11901

BIS, Central Laboratory (CL)

None

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

- View breakup
Testing charges) for the product are: i) Including Transverse Strength (optional test) test 9,700.00 ii) Excluding Transverse Strength (optional test) test 8,500.00 -Testing charges for only chemical test report: 4,900.00 -Testing charges for only physical test report including optional tests: 4,800.00 -Testing charges for only physical test report excluding optional tests: 3,600.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 Table-2 viii (Alkali content)	-
6.1 Table-2 vii (Chloride content)	-
6.1 Table-2 vi (Loss on ignition)	-
6.1 Table-2 v (Total Sulphur Content calculated as Sulphuric Anhydride)	-
6.1 Table-2 iv (Magnesia)	-
6 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
6.1 Table-2 iii. (Insoluble residue)	-
6.1 Table-2 ii. (Ratio of percentage of alumina to that of iron oxide)	-
6.1 Table-2 viii (Alkali content)	-
6.1 Table-2 vii (Chloride content)	-
6.1 Table-2 vi (Loss on ignition)	-
6.1 Table-2 v (Total Sulphur Content calculated as Sulphuric Anhydride)	-
6.1 Table-2 iv (Magnesia)	-
6 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
6.1 Table-2 iii. (Insoluble residue)	-
6.1 Table-2 ii. (Ratio of percentage of alumina to that of iron oxide)	-
7 Table-3 iv c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 Table-3 iv b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 Table-3 iv a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 Table-3 iii b (Setting Time Final)	-
7 Table-3 iii a (Setting Time Initial)	-
7 Table-3 ii b (Expansion by Autoclave)	-
7 Table-3 ii a (Expansion by Le Chatelier)	-
7 Table-3 i. (Fineness)	-

-
Excluding Table 2,Clause 6.1 ,sl. no.(viii) , alkali content;

11902

BIS, Northern Regional Laboratory (NRL)

None

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 Table-3 i. (Fineness)	-
7 Table-3 i. (Fineness)	-
7 Table-3 ii a (Expansion by Le Chatelier)	-
7 Table-3 ii b (Expansion by Autoclave)	-
7 Table-3 iii a (Setting Time Initial)	-
7 Table-3 iii b (Setting Time Final)	-
7 Table-3 iv a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 Table-3 iv b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 Table-3 iv c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
6.1 Table-2 vi (Loss on ignition)	-
6.1 Table-2 viii (Alkali content)	-
6.1 Table-2 vii (Chloride content)	-
6.1 Table-2 v (Total Sulphur Content calculated as Sulphuric Anhydride)	-
6.1 Table-2 iv (Magnesia)	-
6.1 Table-2 iii. (Insoluble residue)	-
6.1 Table-2 ii. (Ratio of percentage of alumina to that of iron oxide)	-
6 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-

-
Test Facility is complete for Chemical. Test Facility is complete except Transverse Strength Test

11903

BIS, Southern Regional Laboratory (SRL)

None

IS 12818 (2010)

Unplasticized polyvinyl chloride (Pvc - U) screen and casing pipes for bore/tubewells - Specification (Second Revision)

- View breakup
Rs 6450/- Excluding effect on water test

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.6 (Vicat Softening Temperature IS 12235 (Part 2).)	-
9.3 (Density IS 12235 (Part 14))	-
9.1 ( Visual Appearance)	-
7.2 and Table 5, 6 & 7 Fig 1B (Wall thickness, Min)	-
7.2 and Table 5, 6 & 7 Fig 1B (Mean Outer Diameter over Connection)	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B (Outer Diameter at any point )	-
7.2 and Table 5, 6 & 7 Fig 1B (Mean Outer Diameter of Pipe, Min)	-
7.1 and Table 1, 2, 3, & 4 Fig 1A & 1B (Mean Outer Diameter of Pipe)	-
7.2 and Table 5, 6 & 7 Fig 1B (Mean Outer Diameter of Pipe , Max)	-
7.2 and Table 5, 6 & 7 Fig 1B (Outer Diameter at any point , Min)	-
8.4 (Sealing rings - Hardness)	-
9.1 ( Visual Appearance)	-
5 (COLOUR)	-
8.4.1 and Table 13 Fig 3B & 4B (Dimensions of sealing elements)	-
7.4 Table 8 & 9 Fig 1 (Effective length, l2)	-
7.4 Table 8 & 9 Fig 1 (Segmental length, l3)	-
7.4 Table 8 & 9 Fig 1 (Segmental length, l4)	-
7.4 Table 8 & 9 Fig 1 (Segmental length, l5)	-
7.3.1 (No.of Ribs)	-
7.3.2 (Rib height)	-

-
" 6 mts, 2 Gaskets and 5 Hardness button Excluding Excl. Tensile test, reistance to external blows at 0°C , Effect on Water, thread gauges

11904

BIS, Central Laboratory (CL)

None

IS 710 (2010)

Marine plywood - Specification (Second Revision)

Rs 11200/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (WORKMANSHIP AND FINISH )	-
7.2 (WORKMANSHIP AND FINISH )	-
7.3 (WORKMANSHIP AND FINISH )	-
7.5 (WORKMANSHIP AND FINISH )	-
6.1 (DIMENSIONS)	-
6.2 (DIMENSIONS)	-
6.3 (DIMENSIONS)	-
9.1.1 (MOISTURE CONTENT)	-
9.1.2 , 9.1.2.1 (Glue Adhesion in Dry State)	-
9.1.2 , 9.1.2.2 (Glue Adhesion in Dry State)	-
9.1.3 , 9.1.3.1.1 (Water resistance test)	-
9.1.3 , 9.1.3.1.2 (Water resistance test)	-
9.1.5 (Mycological test)	-
9.1.4 (Tensile strength)	-
9.1.6 (Table 3) (Static bending strength)	-
9.1.6 (Table 3) (Static bending strength)	-
9.1.7 (Table 4) (Wet bending strength)	-
9.1.7 (Table 4) (Wet bending strength)	-
9.1.8 (Retention of preservative)	-
11.1 (MARKING)	-

-
-

11905

BIS, Central Laboratory (CL)

None

IS 12786 (1989)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.3 (Tensile Test)	-
7.3 (Elongation at Break)	-
4.1.c & 4.2.a (Carbon Black content - IS 2530 : 1963)	-

-
Excluding Environmental strees cracking resistance test and Cl 7.1 & Table 2 Hydraulic test;

11906

BIS, Central Laboratory (CL)

None

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

- View breakup
Rs. 4250/-(Excluding leakage test and Hyd. Proof Test)+Testing charges as per IS 14151(Part 1)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.2.1 (Visual and Workmanship Requirement)	-
4.2.7 (1 Dimensions of Quick Coupled Pipes and Fittings)	-

-
-

11907

BIS, Central Laboratory (CL)

None

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

- View breakup
Rs.8420/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 - Table - 1 v (Chloride content - Cl 4.13 of IS 4032:1985)	-
6 - Table - 1 iv (Loss on ignition - Cl 7.1 of IS 4032:1985)	-
6 - Table - 1 i (Insoluble residue - Cl 7.4 of IS 4032:1985)	-
6 - Table - 1 iii (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-
6 - Table - 1 ii (Magnesia - Cl 7.2 of IS 4032:1985)	-
6 - Table - 1 vi ( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-
7 -Table 2- vi (Drying Shrinkage- IS 4031 Part 10)	-
7 -Table 2- iv- c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 -Table 2- iv- b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 -Table 2- iv- a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 -Table 2-iii- b (Setting Time Final- 4031 Part 5)	-
7 -Table 2- iii- a (Setting Time Initial- 4031 Part 5)	-
7 -Table 2- ii- b (Expansion by Autoclave- 4031 Part 3)	-
7 -Table 2- ii- a (Expansion by Le Chatelier- 4031 Part 3)	-
7 -Table 2- i (Fineness 4031 Part 2)	-

-
Excluding Table 1,Clause 6 ,sl. no.(vi) , alkali content;

11908

BIS, Central Laboratory (CL)

None

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.1 (Colour)	-

-
Excluding Effect on water

11909

BIS, Central Laboratory (CL)

None

IS 4984 (2016)

Polyethylene pipes for water supply - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl. 8.3 (Carbon Black Content)	-
7.4 table -3 & 4 (6.1 Dimensions)	-
8.2 (Longitudinal Reversion Test)	-
Cl 8.3 (Carbon Black Dispersion)	-
8.7 (Density)	-
8.4 ( Melt Flow Rate)	-
7.4.1.2 (Ovality)	-
7.2 (Length)	-
6.2 (Colour)	-
6.2.1 (6.1.1 Identification Stripes)	-

-
Excluding Oxidation induction , overall migration, Cl 8.7 density, Cl 7.4.1.2 ovality Cl 8.8 Tensile,Cl 8.9 Elongation at Break;

11910

BIS, Central Laboratory (CL)

None

IS 2202 : Part 1 (2023)

WOODEN FLUSH DOOR SHUTTERS SOLID CORE TYPE SPECIFICATION PART 1 PLYWOOD FACE PANELS Seventh Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.1 (Workmanship & Finish)	-
9.2 (Workmanship & Finish)	-
9.3 (Workmanship & Finish)	-
11.1 (Dimensions - Height)	-
11.1 (Dimensions - Width)	-
9.3 (Workmanship & Finish)	-
11.1 (Dimensions - Thickness)	-
11.1 (Dimensions - Variation in thickness)	-
11.1 (Dimensions - Thickness)	-
11.1 (Dimensions - Width)	-
11.1 (Dimensions - Height)	-
9.1 (Workmanship & Finish)	-
9.2 (Workmanship & Finish)	-
9.3 (Workmanship & Finish)	-
11.14 (Glue Adhesion Test)	-
11.13 (Knife Test)	-
11.12 (End immersion test)	-
Clause 11.11 (Varying Humidity Test)	-
11.10 (Misuse Test)	-
11.9.2 (Slamming Test)	-
11.8 (Buckling Test)	-
Clause 11.7 (Shock Resistance Test)	-
11.4 (Impact Indentation Test)	-
Clause 11.2 (General Flatness Test)	-
11.1 (Dimensions - Squareness)	-
11.1 (Dimensions - Height)	-
11.1 (Dimensions - Width)	-

-
Excluding Test facility not available for Cl 11.2, 11.4, 11.6, 11.8, 11.9;

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number