BIS - LIMS (Laboratory Information Management System)

Search by IS Number

Reset

15361 Results

S.No.

Lab Name

Osl Code

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

14281

BIS, Western Regional Laboratory (WRL)

None

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

Rs. 9200/- Excluding test on joints View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Outer Diameter, Thickness & Mass)	-
Cl 14 (Tensile Test, Flattening Test & Bend Test)	-
Cl 15 (Workmanship)	-
7, 6.1.1 (CARBON)	-
7, 6.1.1 (SULPHUR)	-
7, 6.1.1 (PHOSPHURS)	-
7, 6.1.1 (MANGANESE)	-
7, 6.1.1 (SILICON)	-

-
Test facilities are not available for the following: 1. Micro-alloying elements like Nb. V or Ti, Nitrogen, Al,Cu 2. Bending test

14282

BIS, Central Laboratory (CL)

None

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

Please see remarks. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.1.1 & 13.2 Table-1 (mech) (Diameter of Aluminium Wires Before Stranding)	-
8.1.1 & 13.2 Table 2 (mech) (Diameter of Steel Wires Before Stranding)	-
8.1.1 & 13.2 Table-1 (mech) (Diameter of Aluminium Wires After Stranding)	-
8.1.1 & 13.2 Table 2 (mech) (Diameter of Steel Wires After Stranding)	-
13.3 Table 1 (mech) (Breaking Load of Aluminium Wires Before Stranding)	-
13.3 Table 2 (mech) (Breaking Load of Steel Wires Before Stranding)	-
13.3 Table 1 (mech) (Breaking Load of Aluminium Wires After Stranding)	-
13.3 Table 2 (mech) (Breaking Load of Steel Wires After Stranding)	-
10 (elec) (Stranding)	-
10 (elec) (Stranding)	-
10 (elec) (Stranding)	-
10 (mech) (Stranding)	-
13.4.1 (mech) (Ductility by Torsion Test before stranding)	-
13.4.1 (mech) (Ductility by Torsion Test before stranding)	-
13.4.1 (mech) (Ductility by Torsion Test after stranding)	-
13.4.1 (mech) (Ductility by Torsion Test after stranding)	-
13.4.2 (elec) (Ductility by Elongation Test before stranding)	-
13.4.2 (elec) (Ductility by Elongation Test after stranding)	-
13.5.1 (mech) (Wrapping Test Aluminium Wires Before Stranding)	-
13.5.1 (mech) (Wrapping Test Aluminium Wires After Stranding)	-
13.5.2 (mech) (Wrapping Test Galvanized Steel Wires Before Stranding)	-
13.5.2 (mech) (Wrapping Test Galvanized Steel Wires After Stranding)	-
13.6 (elec) (Resistance test-Aluminium wire before Stranding)	-
13.6 (elec) (Resistance test-Aluminium wire after stranding)	-
13.7.2 (chem) (Mass of Zinc coating)	-
13.7.2 (chem) (Uniformity of Zinc coating)	-
13.8 Table-4 (mech) (Lay Ratio- Aluminium Wire Outermost Layer)	-
13.8 Table-4 (mech) (Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-
13.8 Table-4 (mech) (Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-
13.8 Table-4 (mech) (Lay Ratio- Steel Core (6 Wire Layer))	-
13.9 (elec) (Surface condition test)	-
8.1.1 & 13.2 Table-1 (Diameter of Aluminium Wires Before Stranding)	-
8.1.1 & 13.2 Table 2 (Diameter of Steel Wires Before Stranding)	-
8.1.1 & 13.2 Table-1 (Diameter of Aluminium Wires After Stranding)	-
8.1.1 & 13.2 Table 2 (Diameter of Steel Wires After Stranding)	-
10 (Stranding)	-
13.3 Table 1 (Breaking Load of Aluminium Wires Before Stranding)	-
13.3 Table 2 (Breaking Load of Steel Wires Before Stranding)	-
13.3 Table 1 (Breaking Load of Aluminium Wires After Stranding)	-
13.3 Table 2 (Breaking Load of Steel Wires After Stranding)	-
13.4.1 (Ductility by Torsion Test before stranding)	-
13.4.1 (Ductility by Torsion Test before stranding)	-
13.4.1 (Ductility by Torsion Test after stranding)	-
13.5.1 (Wrapping Test Aluminium Wires Before Stranding)	-
13.5.1 (Wrapping Test Aluminium Wires After Stranding)	-
13.5.2 (Wrapping Test Galvanized Steel Wires Before Stranding)	-
13.5.2 (Wrapping Test Galvanized Steel Wires After Stranding)	-
13.8 Table-4 (Lay Ratio- Aluminium Wire Outermost Layer)	-
13.8 Table-4 (Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-
13.8 Table-4 (Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-
13.8 Table-4 (Lay Ratio- Steel Core (6 Wire Layer))	-
13.7 (Galvanising test Dip test for uniformity of coating)	-
13.7 (Galvanising test Dip test for uniformity of coating)	-
13.7 (Weight of Zinc Coating [g/m²])	-
13.7 (Weight of Zinc Coating [g/m²])	-
7.1 (Freedom from Defects)	-
9 (Joint in Wire)	-

-
Complete upto 100 sqmm, Above 100 sq. mm. TF not available for Stress-strain test, Surface conditioning test, ultimate breaking load on stranded conductor

14283

BIS, Central Laboratory (CL)

None

IS 12592 (2002)

Precast concrete manhole cover and frame - Specification (First Revision)

1809 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Grade)	-
3 (Type/Shape of Cover)	-
5.2 and Table 1 (Dimensions of Frame - A)	-
5.2 and Table 1 (Dimensions of Frame - B)	-
5.2 and Table 1 (Dimensions of Frame - C)	-
5.2 and Table 1 (Dimensions of Frame - D)	-
5.2 and Table 1 (Dimensions of Frame - E)	-
5.2 and Table 1 (Dimensions of Frame - F)	-
5.2 (Clearance at top between the frame and the cover all round the periphery)	-
5.2 (Top surface ofthe frame and cover is in level)	-
5.2 (Suitable taper matching with taper given for the frame shall be provided to the periphery of the cover)	-
5.2 and Fig 1 (Clear cover to reinforcement)	-
5.2 and Fig 1 (Distance of housing from the edge)	-
7.4.1 (Edge Protection and Finishing - Frame)	-
7.4.1 (Edge Protection and Finishing - Frame)	-
7.4.2 (Edge Protection and Finishing - Cover)	-
7.4.2 (Edge Protection and Finishing - Cover)	-
7.4.2 (Edge Protection and Finishing - Cover)	-
8 (LIFTING HOOKS)	-
8 (LIFTING HOOKS)	-
9.1 (General)	-
9.3 and Table and Annex C (Load Test)	-
Clause No. 9.3 Annex C (Permanent set of cover)	-

-
Complete

14284

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

51000 View breakup
Rs.51000/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	1000	10% discount for BIS
6(Interchangeability)	-	3000	10% discount for BIS
7(Protection against accidental contact with live parts)	-	5000	10% discount for BIS
8(Insulation Resistance and Electric Strength)	-	5000	10% discount for BIS
9(MECHANICAL STRENGTH)	-	5000	10% discount for BIS
10(cap temperature)	-	5000	10% discount for BIS
11(Resistance to Heat)	-	5000	10% discount for BIS
12(Resistance to Flame and Ignition)	-	6000	10% discount for BIS
13(Fault conditions)	-	8000	10% discount for BIS
14(Creepage distance and clearances)	-	8000	10% discount for BIS

14 Nov, 2027

-
Only for IP(0-4)(5-6) Restricted for B22d , and E14 , E 27 ( Included w.e.f. 27.08.2019) Upto 30 V and 10 A only

14285

BIS, Western Regional Laboratory (WRL)

None

IS 2002 (2009)

Steel plate for pressure vessel for intermediate and high temperature service including boilers (Third Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-
Cl 12 (UTM)	-
Cl 13 (Press)	-
Cl 14 (Workmanship)	-
Cl 9 (Length, Width & Thickness)	-
Cl 12 (UTM)	-
Cl 13 (Press)	-
Cl 14 (Workmanship)	-
Cl 9 (Length, Width & Thickness)	-

-
Test facilities are not available for the following: 1. Al, N, Cu, Mn, Cr, Mo, V, Ni 3. Homogeneity test 3. Ultrasonic test, ( cl 15 )

14286

BIS, Central Laboratory (CL)

None

IS 1038 (1983)

Specification For Steel Doors, Windows And Ventilators

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1. (Size-Height)	-
4.1 (Size-Width)	-
5 (Material-Rolled Steel Section)	-
5 (Material-Coupling Section)	-
5 (Material-Glass Panels)	-
6.1 (Frames)	-
6.1.1.1 (Visual Inspection Test)	-
6.1.1.4 (Fillet Weld Test)	-
6.2 (Side Hung Shutter- Thickness of hinge)	-
6.2 (Side Hung Shutter- Pin diameter)	-
6.2 (Side Hung Shutter-Width of hinge)	-
6.2.2 & 6.2.2.1 (Handle and Handle Plate- Thicknesss of handle)	-
6.2.3 (Peg Stay - Thickness)	-
6.2.3 (Peg Stay - Dimensions-A)	-
6.2.3 (Peg Stay - Dimensions-B)	-
6.2.3 (Peg Stay - Dimensions-C)	-
6.2.3 (Peg Stay - Dimensions-D)	-
6.2.3 (Peg Stay - Dimensions-E)	-
6.2.3 (Peg Stay - Dimensions-F)	-
6.2.3 (Peg Stay - Dimensions-G)	-
6.2.3 (Peg Stay - Dimensions-H)	-
6.2.3 (Peg Stay - Dimensions-J)	-
6.2.3 (Peg Stay - Dimensions-L)	-
6.2.3 (Peg Stay - Dimensions-M)	-
6.3 (Top Hung Ventilator-Thickness of hinge)	-
6.3 (Top Hung Ventilator-Pin diameter)	-
6.3 (Top Hung Ventilator-Width of hinge)	-

-
-

14287

BIS, Central Laboratory (CL)

None

IS 12427 (2001)

Fasteners - Threaded steel fasteners - Hexagon head transmission tower bolts - Specification (First Revision)

3750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 3.1, Cl 3.2, Fig-1, Table-1 & Table-2 (Dimensions)	-
Cl 5.1 & IS 14394 (Nuts)	-
Cl 5.2, IS 2016 & IS 4759 (Washers)	-
Cl 6.1 & IS 1367(Pt 3) (Bolt Tensile,Proof,Wedge Loading,Hardness Test)	-
Cl 7 & IS 1367(Pt 13) (Finish)	-
Cl 8 & IS 1367(Pt 9/Sec1) (General Requirements)	-

-
Excluding -; Cl 6 - Mechanical Properties as per IS 1367-3 (Except Hardness & Impact Test), Cl 6.2 - Shear Strength

14288

BIS, Central Laboratory (CL)

None

IS 7452 (1990)

Hot rolled steel sections for doors, windows and ventilators - Specification

Rs 1800/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
cl 6 (Dimensions)	-
cl 7 (MASS AND MASS TOLERANCE)	-
cl 8 (SURFACE FINISH)	-
cl 9 (BEND TEST)	-
Clause-5 & 5.1 (Carbon)	-
Clause-5 & 5.1 (Sulphur)	-
Clause-5 & 5.1 (Phosphors)	-
Clause-5 & 5.1 (Manganese)	-
Clause-5 & 5.1 (Aluminium)	-
Clause-5 & 5.1 (Silicon)	-
Clause-5 & 5.1 (Nitrogen)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14289

BIS, Northern Regional Laboratory (NRL)

None

IS 9968 : Part 1 (1988)

Specification for elastomer insulatedcables: Part 1 for working voltages up to and including 1100 volts (First Revision)

Rs.12000/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 ( Copper Cooduetor)	-
3.2 (Aluminium conductor)	-
4.1 (INSULATION : lnsulation for General Service)	-
4.2 (INSULATION : Heat Resisting insulation)	-
4.3 (INSULATION : Silicone Rubber Insulation)	-
5.1 (TAPE : Proofed Tape)	-
5.2 (TAPE : 2 Polyethyl_ Terephthalate ( PETP ) Tape or Plastic: Tape or Any Other SlIIitable Tape )	-
5.3 (TAPE : Giass Tape)	-
6.1 (FILLERS : )	-
7.1 (BRAID : Textile Braid)	-
7.2 (BRAID : Glass Braid )	-
8.1 (SHEATH : General Service Insulated Cables and Flexible Cords)	-
8.2 (SHEATH :Heat Resisting Insulated Cables)	-
9.1 (PresenRtive Compound)	-
9.2 (Varnish)	-
10 ( Conductor )	-
11 (Separator tape)	-
12.2 (Insulation : Thickness of Insufatien)	-
12.4 (Insulation : Allplication of Insulation)	-
13 (CORE IDENTiFICATlON)	-
14 (Tape)	-
15 (BRAIDING)	-
16 (COMPOUNDING AND VARNISHING)	-
17 (LAYING UP OF CORES)	-
18 ( Binder tape)	-
19.2 (Sheath : Thickness of Sheath)	-
19.4 ( Sheath :Colour)	-
20 ( Overall diameter)	-
21. (b) (Annealing Test (for coper))	-
21. (c) ( Tensile Test (for aluminium))	-
21. (d) ( Wrapping Test (for aluminium))	-
21. (e) (Conductor Resistance )	-
21.1 ( Tensile strength )	-
22.1 ( Elongation)	-
21.1 (type test : Ageing In air oven)	-
21.1 (type test : Ageing in air bomb)	-
21.1 (type test : Ageing In oxygen bomb)	-
21.1 (type test : Tear resistance )	-
22.2 (type test :Insulauon resistance High voltage (water immersron ) test)	-
22.2 (type test : Flammability test ( applicable to cables finished With SE 3 and SE 4 sheaths only) )	-
21 (Water absorption test)	-
23 (identification)	-

-
Excluding Cl.21.1 water absorption test (electrical) for IE2

14290

BIS, Central Laboratory (CL)

None

IS 15030 (2001)

Terephthalic acid - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl No 3.2 [ Table 1, Sl no.(ii) ] Annex B (Colour)	-
Cl No 3.2 [ Table 1, Sl no.(iii) ] Annex C (Ash content,)	-
Cl No 3.2 [ Table 1, Sl no.(iv) ] Annex D (Acid value)	-
Cl No 3.2 [ Table 1, Sl no.(v) ] Annex E & Annex J (Total of iron, cobalt, manganese and chromium)	-
Cl No 3.2 [ Table 1, Sl no.(v) ] Annex E & Annex J (iron)	-
Cl No 3.2 [ Table 1, Sl no.(v) ] Annex E & Annex J (cobalt)	-
Cl No 3.2 [ Table 1, Sl no.(v) ] Annex E & Annex J (manganese )	-
Cl No 3.2 [ Table 1, Sl no.(v) ] Annex E & Annex J (chromium)	-
Cl No 3.2 [ Table 1, Sl no.(vi) ] Annex F & Annex J (Total of sodium, magnesium, potassium, calcium and Nickel)	-
Cl No 3.2 [ Table 1, Sl no.(vi) ] Annex F & Annex J (Sodium)	-
Cl No 3.2 [ Table 1, Sl no.(vi) ] Annex F & Annex J (magnesium)	-
Cl No 3.2 [ Table 1, Sl no.(vi) ] Annex F & Annex J (potassium)	-
Cl No 3.2 [ Table 1, Sl no.(vi) ] Annex F & Annex J (calcium)	-
Cl No 3.2 [ Table 1, Sl no.(vi) ] Annex F & Annex J (nickel)	-
Cl No 3.2 [ Table 1, Sl no.(vii) ] Annex G Method A and C (4-carboxybenzaldehyde)	-
Cl No 3.2 [ Table 1, Sl no.(viii) ] Annex G Method A and B (p-toluic acid,)	-
Cl No 3.3 (Particle Size)	-

-
Excluding Supersheded by IS 15030 ( 2022);

14291

BIS, Central Laboratory (CL)

None

IS 4454 : Part 2 (2001)

Steel wire for mechanical springs - Specification february 2001: Part 2 oil hardened and tempered steel wire (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (Workmanship)	-
Cl 9 (Diameter & Difference Between Two Reading On Any Two Diameters)	-
Cl 10 (Tensile Test, Wrap Test, Torsion Test, Bend Test, Coiling and Stretching, Cast of wire, Deep Etch Test, Decarburization Test, Coating and Surface Finish & Eddy Current Test)	-
7.1, 7.2 (carbon)	-
7.1, 7.2 (sulphur)	-
7.1, 7.2 (phosphorus)	-
7.1, 7.2 (manganese)	-
7.1, 7.2 (silicon )	-
7.1, 7.2 (copper)	-
7.1, 7.2 (Chromium)	-
7.1, 7.2 (Vanadium)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14292

BIS, Central Laboratory (CL)

None

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

Rs.1600/- for 7 strands, Rs.3750/- for 19 strands View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
12.2, Table-1 (Measurement of diameter of individual aluminium wire)	-
12.3, Table-1 (Breaking load before stranding)	-
12.3, Table-1 (Breaking load after stranding)	-
12.4 (Wrapping test)	-
12.5, Table 1 (Resistance test)	-
12.6, Table 3 (Measurement of lay ratio)	-
9.3 (Stranding)	-
6 (Freedom from defects)	-

-
-

14293

BIS, Central Laboratory (CL)

None

IS 2721 (2003)

Galvanized steel chain link fence fabric - Specification (Second Revision)

6910 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6.1, 6.2, Table 1 (Mesh Size)	-
Cl.6.3, Table 1 (Width of the fabric)	-
Cl.6.3, Table 1 (Length of the fabric)	-
Cl.6.1, 6.2, Table 1 (Nominal Dia of Mesh wire)	-
Cl. 7.2 and Table 1 (Line Wire (Diameter))	-
Cl. 7.2 and Table 1 (Line Wire (Number of wires))	-
Cl.8 (Chain link fence fabric(Mass of zinc coating)- IS 6745)	-
Cl.9.1.1 (Tensile test of mesh and line wires- IS 1608)	-
Cl.9.1.2 (Wrapping test of mesh and line wires-IS 1755)	-
Cl.9.1.4 (Bend test of mesh and line wires- IS 1608)	-
Cl.9.1.3 (Twist test of mesh and line wires-IS 1717)	-
Cl.9.2 (Line wire (Mass of zinc coating)- IS 6745)	-
Cl.5 (Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-
Cl.5 (Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-

-
Sample size shall be minimum dia> 3mm and thickness > 0.8 mm;

14294

CIPET, Hyderabad

6111634

IS 710 (2010)

Marine plywood - Specification (Second Revision)

20050 View breakup
Rs.19675/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(WORKMANSHIP AND FINISH )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.2(WORKMANSHIP AND FINISH )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.3(WORKMANSHIP AND FINISH )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
7.5(WORKMANSHIP AND FINISH )	-	300	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(DIMENSIONS)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
6.1(DIMENSIONS)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
6.2(DIMENSIONS)	-	500	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.1(MOISTURE CONTENT)	-	900	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.2 , 9.1.2.1(Glue Adhesion in Dry State)	-	1600	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.3 , 9.1.3.1.1(Water resistance test)	-	2100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.3 , 9.1.3.1.2(Water resistance test)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.4(Tensile strength)	-	2700	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.5(Mycological test)	-	3200	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.6 (Table 3)(Static bending strength)	-	4900	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.7 (Table 4)(Wet bending strength)	-	4900	25% DISCOUNT ON TEST CHARGES FOR BIS
9.1.8(Retention of preservative)	-	1100	25% DISCOUNT ON TEST CHARGES FOR BIS

23 Feb, 2027

-
Testing charges has been fixed for a period of two years w.e.f. 29.01.2019 i.e. up to 28.01.2021.

14295

BIS, Eastern Regional Laboratory (ERL)

None

IS 210 (2009)

Grey iron castings - Specification (First Revision)

For all grades except tests mentioned in remarks

Rs.2700.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.1 (WORKMANSHIP AND FINISH)	-
10.1 (FREEDOM FROM DEFECTS)	-
13 (SIZE OF TEST BARS-Length)	-
13 (SIZE OF TEST BARS-Diameter)	-
15, Table 3 (TENSIL.E TEST- IS 1608 Part1 )	-
16, Table 3 (Hardness Test)	-
6 (Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-
9 (Microstructure)	-
17,Annex B (TRANSVERSE TEST)	-
18 (HYDROSTATIC TEST)	-
6 (Chemical Composition(chemical composition shall be as agreed to between the purchaser and the manufacturer.))	-
Cl-6 (Phosprorus (P) - IS 12308 ( P-5))	-

-
Chem: only available for Phosphorous as per Cl. 6.1) Mech- Excluding hydrostatic test and transverse test. For Hardness test, provide sample greater than 10 mm thickness Note: If test bars are sent for mechanical testing, please specify whether hardness and microstructure analysis should be performed on those test bars.

14296

IDMA LABORATORIES LIMITED, PANCHKULA

9123236

IS 2785 (1979)

Specification for natural cheese (Hard Variety), processed cheese, processed cheese spread and soft cheese (First Revision)

2000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.3.1(Appearance)	-	100	5% discount to BIS
3.3.2(Odour and Flavour)	-	100	5% discount to BIS
3.3.3(Texture and Consistency)	-	100	5% discount to BIS
3.3.4- Table 1-i(Moisture- Annex A)	-	300	5% discount to BIS
3.3.4- Table 1-ii(Milk fat ( on dry basis)- Annex B)	-	700	5% discount to BIS
3.3.4- Table 1-iii(Salt ( added sodium chloride)- Annex C)	-	500	5% discount to BIS Note: Reporting charges- Rs/- 200

31 Dec, 2026

-
-

14297

BIS, Patna Branch Laboratory (PBL)

None

IS 8041 (1990)

Rapid hardening portland cement - Specific4tion (Second Revision)

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 ii (Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-
5.1 - Table - 1 iii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
5.1 - Table - 1 iv (Magnesia - Cl 4.8 of IS 4032:1985)	-
5.1 - Table - 1 v (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
5.1 - Table - 1 vi (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
6.1 (Fineness 4031 Part 2)	-
6.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
6.2.1.1 (Expansion after aeration - 4031 Part 3)	-
6.2.1 (Expansion by Autoclave- 4031 Part 3)	-
6.2.1.1 (Expansion after aeration- 4031 Part 3)	-
6.3 a) (Setting Time Initial- 4031 Part 5)	-
6.3 b) (Setting Time Final- 4031 Part 5)	-
6.4 a) (Compressive Strength At 24 hrs ± 30 minutes - IS 4031 Part 6)	-
6.4 b) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-

-
All test facilities are available as per the IS

14298

BIS, Eastern Regional Laboratory (ERL)

None

IS 12330 (1988)

Specificatioon for sulphate resisting Portland cement

Rs.12900/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 i (Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 ii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
4.1 - Table - 1 ii (Insoluble residue - Cl 4.10 of IS 4032:1985)	-
4.1 - Table - 1 iii (Magnesia - Cl 4.8 of IS 4032:1985)	-
4.1 - Table - 1 iii (Magnesia - Cl 4.8 of IS 4032:1985)	-
4.1 - Table - 1 iv (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
4.1 - Table - 1 iv (Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-
4.1 - Table - 1 v (Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 v (Tricalcium aluminate (C3A) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 vi (Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate ( C4AF + 2C3A ) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 vi (Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate ( C4AF + 2C3A ) - Cl 4 of IS 4032:1985)	-
4.1 - Table - 1 vii (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
4.1 - Table - 1 vii (Total loss on ignition - Cl 4.2 of IS 4032:1985)	-
5.1 (Fineness 4031 Part 2)	-
5.2.1 (Expansion by Le Chatelier- 4031 Part 3)	-
5.2.1 (Expansion by Autoclave- 4031 Part 3)	-
5.3 a) (Setting Time Initial- 4031 Part 5)	-
5.5 i) (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
5.5 ii) (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
5.5 iii) (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
5.3 b) (Setting Time Final- 4031 Part 5)	-
5.4 (Salphate Expansion (Optional))	-
5.6 (Transverse Strength - IS 4031 Part 8 (Optional))	-
5.2.1.1 (Expansion after aeration - 4031 Part 3)	-
5.2.1.1 (Expansion after aeration- 4031 Part 3)	-

-
Facility not available for transverse strength test(Optional)

14299

BIS, Patna Branch Laboratory (PBL)

None

IS 15911 (2010)

Structural steel (Ordinary Quality) - Specification

Rs 6750/- For elements other than Table-1: Rs 1004/- pe View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Table-1, 5.1, 8.1 & 8.2 (Carbon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Sulphur: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Phosphorous: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Manganese: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Silicon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
Table-1, 5.1, 8.1 & 8.2 (Nitrogen: Relevant parts of IS 228 or any other established instrumental/chemical method)	-
7 (Freedom from defects)	-
5 and 10.3.1 (Tensile strength. IS 1608)	-
5 and 10.3.1 (Yield Stress. IS 1608)	-
5 and 10.3.1 (Percentage Elongation. . IS 1608)	-
11.3 ( Bend Test. IS 1599)	-
5 and 10.3.1 (Internal Bend Diameter)	-
Cl 12 of IS 15911 and Table 5.1 of IS 808 (Mass. IS 808)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (D)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (B)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (t)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (T)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (Flange Slop, Max α , )	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (R1)	-
Cl 12 of IS 15911 and Table 2.1 of IS 808 (R2)	-

-
All test facilities are available as per the IS except tests for Chromium, Molybdenum, Vanadium, Nickel, Copper, Niobium, Boron, Titanium, Aluminium and Tungsten (Clause 8.2)

14300

BIS, Central Laboratory (CL)

None

IS 9537 : Part 2 (1981)

Specification for conduits for electrical installations: Part 2 rigid steel conduits

Rs 2100/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Marking, IS 9537-2)	-
6.1 (Marking, IS 9537-2)	-
6.1 (Marking, IS 9537-2)	-
6.2 (Marking, IS 9537-2)	-
6.3 (Marking, Cl. 6.4 of IS 9537-1)	-
7.2.1 (Dimensions, (Minimum outside Diameter), IS 9537-2)	-
7.2.2 (Dimensions (Maximum outside Diameter), IS 9537-2)	-
7.3 (Dimensions (Wall thickness), IS 9537-2)	-
7.3.3 (Uniformity of wall thickness, IS 9537-2)	-
8.1 (Construction, Cl. 8 of IS 9537-1)	-
8.2 (Construction, IS 9537-2)	-
9.3 (Mechanical Properties (Compression Test), IS 9537-2)	-

-
excluding Bending Test & Thread Gauge;

14301

BIS, Patna Branch Laboratory (PBL)

None

IS 10124 : Part 2 (2009)

Fabricated pvc - U fittings for potable water supplies - Specification: Part 2 specific requirements for sockets (Second Revision)

Rs.1800/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.2.1, Table-1, Fig-1 (Nominal size)	-
3.2.1, Table-1, Fig-1 (B)	-
3.2.1, Table-1, Fig-1 (Minimum wall thickness for working pressure)	-
3.2.1, Table-1, Fig-1 (Plumbing)	-
Clause 3.2.2, and Fig. 2 (Nominal size)	-
Clause 3.2.2, and Fig. 2. (B)	-
Clause 3.2.2, and Fig. 2. (Minimum wall thickness for working pressure)	-
3.2.2, and Fig. 2 (Dimensions of Socket for Elastomeric Sealing Ring Joint)	-

-
All test facilities are available as per the IS except- i. Short Term Hydrostatic Test (Clause 6.2) ii. Effect on Water (Clause 6.3)

14302

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 4148 (1989)

Surgical rubber gloves - Specification (First Revision)

15400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Manufacture)	-	250	Nil
4.1.2(Manufacture)	-	0	Charges already taken
4.1.3(Manufacture)	-	0	Charges already taken
4.1.4(Manufacture)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	250	Nil
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.2(Dimensions Fig 1 and Table 1)	-	0	Charges already taken
4.3(Thickness)	-	250	Nil
4.4.1(Physical Properties)	-	1350	Test charges Rs. 1100/- plus Rs. 250/ Specimen charges (25% discount is not applicable in specimen charges)
4.4.1(Physical Properties)	-	1350	Test charges Rs. 1100/- plus Rs. 250/ Specimen charges (25% discount is not applicable in specimen charges)
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	6000	(25% discount is not applicable in Ageing charges)
4.4.2(After accelerated aging at 70 + 1OC for 240 h )	-	0	Test charges already taken
4.4.3(After heat ageing in autoclave)	-	2500	(25% discount is not applicable in Ageing charges)
4.4.3(After heat ageing in autoclave)	-	0	Charges already taken
4.4.4(Tension Set)	-	1350	Test charges Rs. 1100/- plus Rs. 250/ Specimen charges (25% discount is not applicable in specimen charges)
4.5(pH of Aqueous Extract )	-	750	Nil

31 Dec, 2026

-
Included w.e.f. 27-05-2022.

14303

CENTRAL INSTITUTE OF PETROCHEMICALS ENGINEERING AND TECHNOLOGY (CIPET):CSTS-BHOPAL

8100534

IS 3462 (1986)

Unbacked Flexible Pvc Flooring

19800 View breakup
Rs.17238/- (After 25% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(DIMENSIONS AND TOLERANCES-Liaear Dimension-Sheets or Rolls)	-	200	Nil
5.1.2(DIMENSIONS AND TOLERANCES-Liaear Dimension-Tiles)	-	250	Nil
5.2(DIMENSIONS AND TOLERANCES-Thickness)	-	0	Charge already taken in clause no. 5.1.1 (Combined charges)
6. 1(COLOUR AND SURFACE CHARACTERISTICS)	-	250	Nil
7.1-Table 1(iii)(REQUlREMENTS-rile size )	-	0	Charge already taken
7.1-Table 1(iv)(REQUlREMENTS-Dimensional stability )	-	700	Nil
7.1-Table 1(iv)(REQUlREMENTS-Squareness )	-	0	Charge already taken
7.1-Table 1(v)(REQUlREMENTS-Colour fastness to daylight )	-	850	Nil
7.1-Table 1(vi)(REQUlREMENTS-Curling )	-	0	Charge already taken
7.1-Table 1(vii)(REQUlREMENTS-Residual indenration )	-	1400	Nil
7.1-Table 1(viii)(REQUlREMENTS-Flexibility )	-	1500	Nil
7.1-Table 1(ix)(REQUlREMENTS-Resistance to various substances-Scratch width )	-	1100	nil
7.1-Table 1(x)(REQUlREMENTS-Resistance to various substances )	-	0	Charge already taken in clause no. 7.1 (Combined charges)
7.1-Table 1(xi)(REQUlREMENTS-Ply adhesion )	-	1400	Test charges Rs. 1100/- plus Rs. 300/ Specimen charges (25% discount is not applicable in specimen charges)
7.1-Table 1(xii)(REQUlREMENTS-Moisture movernent )	-	700	Nil
7.1-Table 1(xiii)(REQUlREMENTS-Heat ageing and exudation )	-	10100	Test charges Rs. 1100/- plus Rs. 9000/- Conditioning charges (25% discount is not applicable in Conditioning charges)
7.1-Table 1(xiii)(REQUlREMENTS-Elastic product)	-	1350	Test charges Rs. 1100/- plus Rs. 250/ Specimen charges (25% discount is not applicable in specimen charges)

31 Dec, 2026

-
Included w.e.f. 29.06.2017.

14304

BIS, Central Laboratory (CL)

None

IS 4581 (1978)

Specification for phosphorus trichloride, pure and analytical reagent (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description )	-
3.2, Table 1 and A-2 of IS 4581 (Phosphprus Tricloride ( as PCl3 ) - For Analytical Reagent )	-
3.2, Table 1 and A-2 of IS 4581 (Phosphprus Tricloride ( as PCl3 ) - For Pure grade)	-
3.2, Table 1 and A-3 of IS 4581 (Relative density at 27°C/ 27°C - For all Grade)	-
3.2, Table 1 and A-4 of IS 4581 (Evaporation residue, including PCl5 - For All Grades)	-
3.2, Table 1 and A-5 of IS 4581 (Sulphate ( as SO4) - For Analytical Reagent)	-
3.2, Table 1 and A-6 of IS 4581 (Heavy metals (as Pb), - For Analytical Reagent)	-
3.2, Table 1 and A-7 of IS 4581 (Iron ( as Fe ) - For Analytical Reagent)	-

-
Excluding Clause 4.2 Table 1 (i) Phosphorus trichloride,;

14305

BIS, Eastern Regional Laboratory (ERL)

None

IS 1079 (2017)

Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)

For all grades except tests mentioned in remarks

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8 (UTM)	-
Cl 10 (Die Press)	-
Cl 12 (Workmanship)	-
Cl 13 (Length, Width & Thickness)	-
Cl 13 (Length, Width & Thickness)	-
Cl 13 (Length, Width & Thickness)	-
6.1 (Carbon %)	-
6.1 (Manganese %)	-
6.1 (Phosphorus %)	-
6.1 (Sulphur %)	-
6.1 (Silicon %)	-
6.1 ( Copper %)	-
6.1 ( Nitrogen%)	-
Cl 8 (UTM)	-
Cl 9 (Press)	-
6.1 ( Aluminium %)	-
6.1 ( Ti)	-
Cl. 7.1, table 3 (Aluminium)	-
Cl. 7.1, table 3 (Niobium)	-
Cl. 7.1, table 3 (Vanadium)	-
Cl. 7.1, table 3 (Titanium)	-
Cl. 7.1, table 3 (Boron)	-
Cl. 7.1, table 3 (Silicon)	-
Cl. 7.1, table 3 (Nitrogen)	-
Cl. 7.1, table 3 (Copper)	-
Cl. 7.1, table 3 (Total microalloying elements(Nb+V+Ti+B))	-

-
-

14306

Ace Test Labs & Metrology Pvt. Ltd., Sonipat

9162826

IS 16242 : Part 1 (2014)

Uninterruptible power systems (UPS): Part 1 general and safety requirements for UPS

108000 View breakup
Rs.108000/- (10% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.6(Power interface)	-	3000	10% Discount for BIS
4.7(Marking & instructions)	-	2000	10% Discount for BIS
5.1(Protection against shock and energy hazards)	-	3000	10% Discount for BIS
5.2(Requirement of auxiliary circuits)	-	5000	10% Discount for BIS
5.3(Protective earthing and bonding)	-	5000	10% Discount for BIS
5.5(Over current and earth fault condition)	-	10000	10% Discount for BIS
5.7(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	10000	10% Discount for BIS
6.1(Wiring, connections and supply)	-	5000	10% Discount for BIS
6.3(Wiring terminals for external power conductors)	-	5000	10% Discount for BIS
7.2(STABILITY)	-	5000	10% Discount for BIS
7.3(MECHANICAL STRENGTH)	-	4000	4000 (each )10% Discount for BIS
7.4(Construction details)	-	5000	10% Discount for BIS
7.5(Resistance to fire)	-	8000	8000 (Each)10% Discount for BIS
7.7(Temperature rise)	-	10000	Rs 10000/- for 10 points, 10% Discount for BIS
8.1(General procision for earth leakage)	-	8000	10% Discount for BIS
8.2(Electric Strength)	-	7000	10% Discount for BIS
8.3(Abnormal operating and fault conditions)	-	8000	10% Discount for BIS
9.0(Connection to telecommunication networks)	-	5000	10% Discount for BIS

14 Nov, 2027

-
Only for IP(0-4)(5-6) For UPS/Inverter up to 5KVA), UPS < =10 KVA Excluding: Cl. 4.5/1.5 of RD Components - Cl. 5.6/2.8 of RD Safety Interlocks Cl. 2.10.5.4 & Annex U of RD Semiconductor Devices Cl.2.10.6 PCB material, Cl. 2.10.5.11 Insulation in wound components, CL.7.6 & Annex-M Ventilation of battery Compartment, Annex-L.5 Non linear Loads, Annex-I.5 Solid state backfeed protection Annex-H /Table Protection against Ingress of foreign objects

14307

BIS, Central Laboratory (CL)

None

IS 4505 (2015)

Sodium formaldehyde sulphoxylate - Specification (First Revision)

Please see remarks. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl no 4.2 (Description )	-
Cl no 4.3 [ Table 1, Sl no.(i) ] Annex A-2 Grade-1 (Sodium formaldehyde sulphoxylate dihydrate (NaHSO2.CH2O.2H2O))	-
Cl no 4.3 [ Table 1, Sl no.(i) ] Annex A-2 Grade-2 (Sodium formaldehyde sulphoxylate dihydrate (NaHSO2.CH2O.2H2O))	-
Cl no 4.3 [ Table 1, Sl no.(ii) ] Annex A-2 Grade-1 & Grade 2 (Sodium formaldehyde bisulphate (NaHSO3.CH2O.H2O))	-
Cl no 4.3 [ Table 1, Sl no.(iii) ] Annex A-2 Grade-1 & Grade 2 (Sodium sulphite (Na2SO3))	-
Cl no 4.3 [ Table 1, Sl no.(iv) ] Annex A-3 Grade-1 & Grade 2 (pH (of 1 percent solution))	-
Cl no 4.3 [ Table 1, Sl no.(v) ] Annex A-4 Grade-1 (Iron (as Fe))	-
Cl no 4.3 [ Table 1, Sl no.(v) ] Annex A-4 Grade-2 (Iron (as Fe))	-
Cl no 4.3 [ Table 1, Sl no.(vi) ] Ref to IS 12074 Grade-1 & Grade 2 (Lead (as Pb))	-
Cl no 4.3 [ Table 1, Sl no.(vii) ] Annex A-5 Grade-1 & Grade 2 (Copper (as Cu))	-
Cl no 4.3 [ Table 1, Sl no.(viii) ] Annex A-6 Grade-1 (Zinc (as Zn))	-
Cl no 4.3 [ Table 1, Sl no.(viii) ] Annex A-6 Grade-2 (Zinc (as Zn))	-

-
-

14308

BIS, Eastern Regional Laboratory (ERL)

None

IS 1989 : Part 1 (1986)

Specification for leather safety boots and shoes: Part 1 for miners (Fourth Revision)

For all sizes except test mentioned in remarks

Rs 5100/- for safety boots, Rs.4500/- safety shoes View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (a) (Marking)	-
4.1 (b) (Marking)	-
4.1 (c) (Marking)	-
4.1 (d) (Marking)	-
4.1 (e) (Marking)	-
7.1 (Design)	-
10.1 (Finish)	-
10.3 (Finish)	-
10.4 (Finish)	-
11.1 (Mass Boots with Leather Sole and Heel)	-
11.2 (Mass Boots with Rubber Sole and Heel)	-
12 (Performance test)	-
13 (Design)	-
16.1 (Finish)	-
16.2 (Finish)	-
16.3 (Finish)	-
16.4 (Finish)	-
17.1 (Mass Shoes with Leather Sole and Heel)	-
17.2 (Mass Shoes with Rubber Sole and Heel)	-
18 (Performance test)	-

-
Mech- 2 pairs, Chem-2 pairs

14309

BIS, Central Laboratory (CL)

None

IS/IEC 60898 : PART 1 (2015)

Electrical accessories - Circuit - Breakers for overcurrent protection for household and similar installations: Part 1 circuit - Breakers for a.c. operation (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (Classification, IS 60898-1)	-
4.3 (Classification, IS 60898-1)	-
4.4 (Classification, IS 60898-1)	-
4.5 (Classification, IS 60898-1)	-
4.5.1 (Classification, IS 60898-1)	-
4.5.2 (Classification, IS 60898-1)	-
4.6 (Classification, IS 60898-1)	-
4.7 (Classification, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
6 (Marking and other product information, IS 60898-1)	-
8.1.1 (General, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.2 (Mechanism, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.4.1 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.2 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.3 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.4 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.5.1 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.2 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.3 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.4 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.5 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.6 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.7 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.8 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.9 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.10 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.11 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.12 (Reliability of terminals for external conductors, IS 60898-1)	-
8.2 (Protection against Electric Shock, IS 60898-1)	-
8.3.3 (Isolating capability, IS 60898-1)	-
8.4 (Temperature-rise, IS 60898-1)	-
8.4 (Temperature-rise, IS 60898-1)	-
8.6 (Automatic operation, IS 60898-1)	-
8.1 (Resistance to heat, IS 60898-1)	-
8.11 (Resistance to abnormal heat and to fire, IS 60898-1)	-
8.12 (Resistance to rusting, IS 60898-1)	-
8.13 (Power loss, IS 60898-1)	-
9.3 (Test of indelibility of marking, IS 60898-1)	-
9.4 (Test of reliability of screws, current-carrying parts and connections, IS 60898-1)	-
9.5.1 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.2 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.2 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.3 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.4 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.6 (Test of protection against electric shock, IS 60898-1)	-
9.7.1 (Test of protection against electric shock, IS 60898-1)	-
9.7.2 (Test of protection against electric shock, IS 60898-1)	-
9.7.3 (Test of protection against electric shock, IS 60898-1)	-
9.7.4 (Test of protection against electric shock, IS 60898-1)	-
9.7.5.2 (Test of protection against electric shock, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8.5 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.10.2 (Test of tripping characteristic, IS 60898-1)	-
9.10.3 (Test of tripping characteristic, IS 60898-1)	-
9.10.4 (Test of tripping characteristic, IS 60898-1)	-
9.10.5 (Test of tripping characteristic, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.3 (Clearances and creepage distances, IS 60898-1)	-
8.1.4.1 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.2 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.3 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.4.4 (Reliability of Screws current carrying parts and connections IS 60898-1)	-
8.1.5.1 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.2 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.3 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.4 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.5 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.6 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.7 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.8 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.9 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.10 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.11 (Reliability of terminals for external conductors, IS 60898-1)	-
8.1.5.12 (Reliability of terminals for external conductors, IS 60898-1)	-
8.2 (Protection against Electric Shock, IS 60898-1)	-
8.3.3 (Isolating capability, IS 60898-1)	-
8.4 (Temperature-rise, IS 60898-1)	-
8.4 (Temperature-rise, IS 60898-1)	-
8.6 (Automatic operation, IS 60898-1)	-
8.1 (Resistance to heat, IS 60898-1)	-
8.11 (Resistance to abnormal heat and to fire, IS 60898-1)	-
8.12 (Resistance to rusting, IS 60898-1)	-
8.13 (Power loss, IS 60898-1)	-
9.3 (Test of indelibility of marking, IS 60898-1)	-
9.4 (Test of reliability of screws, current-carrying parts and connections, IS 60898-1)	-
9.5.1 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.2 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.2 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.3 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.5.4 (Tests of reliability of screw-type terminals for external copper conductors, IS 60898-1)	-
9.6 (Test of protection against electric shock, IS 60898-1)	-
9.7.1 (Test of protection against electric shock, IS 60898-1)	-
9.7.2 (Test of protection against electric shock, IS 60898-1)	-
9.7.3 (Test of protection against electric shock, IS 60898-1)	-
9.7.4 (Test of protection against electric shock, IS 60898-1)	-
9.7.5.2 (Test of protection against electric shock, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.8.5 (Test of temperature-rise and measurement of power loss, IS 60898-1)	-
9.10.2 (Test of tripping characteristic, IS 60898-1)	-
9.10.3 (Test of tripping characteristic, IS 60898-1)	-
9.10.4 (Test of tripping characteristic, IS 60898-1)	-
9.10.5 (Test of tripping characteristic, IS 60898-1)	-

-
Excluding 1. 28 days test , 2.Mechanical and Electrical endurance Test, 3. Short circuit test 4. Tripping test at rated voltage, 5. Mechanical shock test, 6. Impact test, 7. Verification of insulation resistance against Impulse Voltage.

14310

BIS, Eastern Regional Laboratory (ERL)

None

IS 362 (1991)

Parliament Hinges -specification

For all types except tests mentioned in remarks

Please see remarks. View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Type)	-
5.1-able 2 (Dlmenslons for Aluminium Alloy Parliament Hinges-Size)	-
7.1 (FINISH)	-

-
Facility not available for Al,V)

Bureau of Indian Standards

The National Standards Body of India

Search by IS Number