| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(Bend Test (Radius of Bend)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(Tensile Strength) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, WP')(0.2 Percent Proof Stress) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(Bend Test (Radius of Bend)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(Tensile Strength) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'W')(0.2 Percent Proof Stress) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O')(Bend Test (Radius of Bend)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 64430, 'O')(Tensile Strength) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Bend Test (Radius of Bend)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H4')(Tensile Strength) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Bend Test (Radius of Bend)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(Tensile Strength) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H3')(0.2 Percent Proof Stress) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Bend Test (Radius of Bend)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10499.97 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(Tensile Strength) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H2')(0.2 Percent Proof Stress) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Bend Test (Radius of Bend)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(Tensile Strength) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-B, 'H1')(0.2 Percent Proof Stress) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Bend Test (Radius of Bend)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(Tensile Strength) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H3')(0.2 Percent Proof Stress) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Bend Test (Radius of Bend)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(Tensile Strength) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H2')(0.2 Percent Proof Stress) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Bend Test (Radius of Bend)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests 5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(Tensile Strength) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'H1')(0.2 Percent Proof Stress) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Bend Test (Radius of Bend)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 51000-A, 'O')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H4')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H3')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H2')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10499.99 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'H1')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'O')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 40800, 'O')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H4')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H3')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H2')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'H1')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'O')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31500, 'O')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H4')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H3')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H2')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'H1')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'O')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 31000, 'O')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H4')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'H2')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'O')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10499.99 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19600, 'O')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H4')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'H2')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'O')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10499.98 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19500, 'O')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H4')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H3')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H2')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500.03 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'H1')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'O')(Bend Test (Radius of Bend)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 2.6 to 6.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness over 1.3 to 2.6 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.8 to 1.3 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'O')(Elongation on 50 mm gauge length (For thickness 0.5 to 0.8 mm)) |
- |
10500 |
|
- |
| 4.2,
Table 2 of IS:21 (Designation & Condition 19000, 'O')(Tensile Strength) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Aluminium) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Lead) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Chromium) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Titanium and or other grain refining elements) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Zinc) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Manganese) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Iron) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Silicon) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Magnesium) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 64430)(Copper) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Aluminium) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Lead) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Chromium) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Zinc) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Manganese) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Iron) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Silicon) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Magnesium) |
- |
10499.98 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-B)(Copper) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Aluminium) |
- |
10499.99 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Lead) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Chromium) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Zinc) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Manganese) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Iron) |
- |
10499.97 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Silicon) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Magnesium) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 51000-A)(Copper) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Aluminium) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Lead) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Titanium and or other grain refining elements) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Zinc) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Manganese) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Iron) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Silicon) |
- |
10499.98 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Magnesium) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 40800)(Copper) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Aluminium) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Titanium and or other grain refining elements) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Lead) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Zinc) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Manganese) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Iron) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Silicon) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Magnesium) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31500)(Copper) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Aluminium) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Lead) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Chromium) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Titanium and or other grain refining elements) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Zinc) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Manganese) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Iron) |
- |
10500 |
|
- |
| 4.2,
Table 1of IS:21 (Designation 31000)(Silicon) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 31000)(Magnesium) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 31000)(Copper) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19600)(Aluminium) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19600)(Cu+Si+Fe+Mn+Zn) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19600)(Lead) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19600)(Zinc) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19600)(Manganese) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19600)(Iron) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19600)(Silicon) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19600)(Copper) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19500)(Aluminium) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19500)(Cu+Si+Fe+Mn+Zn) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19500)(Lead) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19500)(Zinc) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19500)(Manganese) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19500)(Iron) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19500)(Silicon) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19500)(Copper) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19000)(Lead) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19000)(Cu+Mg+Si+Fe+Mn+Zn) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19000)(Aluminium) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19000)(Zinc) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19000)(Manganese) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19000)(Iron) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19000)(Silicon) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19000)(Magnesium) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.2,
Table 1of IS:21 (Designation 19000)(Copper) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.1, & 4.1.1(Lead) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 4.1.2(Aluminium) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| 5(Marking) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| Cl.4.2 Table 1(Silicon - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| Cl.4.2 Table 1(Iron - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| Cl.4.2 Table 1(Copper - IS 228 and its parts or any other intrumental/chemical methods) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| Cl.4.2 Table 1(Manganese - IS 228 and its parts or any other intrumental/chemical methods) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| Cl.4.2 Table 1(Magnesium - IS 228 and its parts or any other intrumental/chemical methods) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| Cl.4.2 Table 1(Chromium - IS 228 and its parts or any other intrumental/chemical methods) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| Cl.4.2 Table 1(Zinc - IS 228 and its parts or any other intrumental/chemical methods) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
| Cl.4.2 Table 1(Titanium - IS 228 and its parts or any other intrumental/chemical methods) |
- |
10500 |
|
5000 - For mechanical tests
5500- For chemical tests |
