| 1531 |
CIMEC Infralabs Private Limited
| 8195606
| IS 12406 (2025) |
Medium Density Fibre Boards of Wood and Other Lignocellulosic Materials for General Purpose - Specification ( Third Revision ) |
All Size, Thickness and Grades |
17500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| As per Clause 8, Table 2(Length -IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual) |
- |
500 |
|
- |
| As per Clause 8, Table 2(Width - IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 8, Table 2(Thickness - IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 8, Table 2(Edge straightness, Max.) |
- |
500 |
|
- |
| As per Clause 9.1 Table 3(Density -IS 2380 (Part 3)) |
- |
750 |
|
- |
| As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3)) |
- |
750 |
|
- |
| As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4)) |
- |
1500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4)) |
- |
1500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5)) |
- |
1500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17)) |
- |
1500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4)) |
- |
1500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4)) |
- |
1500 |
|
- |
| As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1) |
- |
1500 |
|
- |
| As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745) |
- |
2500 |
|
- |
| Cl-5.1(Wood and Any Other Lignocellulosic
Material) |
- |
500 |
|
- |
| Cl-5.2(Adhesive) |
- |
500 |
|
- |
| Cl-5.3(Sizing Material) |
- |
500 |
|
- |
| Cl-5.4(Preservative Treatment) |
- |
500 |
|
- |
| Cl-6(MANUFACTURE) |
- |
500 |
|
- |
| As per Clause 8, Table 2(Length -IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 7(Finish --IS 2380 (Part 2), IS 2380 (Part 3) & Visual) |
- |
500 |
|
- |
| As per Clause 8, Table 2(Width - IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 8, Table 2(Thickness - IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 8, Table 2(Squareness, Max. - IS 2380 (Part 2)) |
- |
500 |
|
- |
| As per Clause 8, Table 2(Edge straightness, Max.) |
- |
500 |
|
- |
| As per Clause 9.1 Table 3(Density -IS 2380 (Part 3)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 3(Variation from mean density, --IS 2380 (Part 3)) |
- |
500 |
|
- |
| As per Clause 9.1 Table 3(Moisture Content -IS 2380 (Part 3)) |
- |
1000 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of rupture (MoR), Min.-IS 2380 (Part 4)) |
- |
2000 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Modulus of elasticity (MoE), Min. -(IS 2380 (Part 4)) |
- |
2000 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table7(Internal bond strength, Min. - IS 2380 (Part 5)) |
- |
1500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(24 h thickness swelling (due to general absorption) Max. - IS 2380 (Part 17)) |
- |
1500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, Table 6, Table 7(Screw withdrawal strength (face) , Min. -IS 2380 (Part 4)) |
- |
1500 |
|
- |
| As per Clause 9.1 Table 4, Table 5, table 6, Table 7(Screw withdrawal strength (edge) , Min. -IS 2380 (Part 4)) |
- |
1500 |
|
- |
| As per Clause 9.1 , Table 5, Table 6, Table 7(Moisture Resistance : Option 1 : Cyclic test (1. )Internal bond strength Min. -IS 2380 (Part 5) see note 1) |
- |
1500 |
|
- |
| As per Clause 9.1 , Table 9(Formaldehyde content Fc, mg/100 g for oven dry board -IS 13745) |
- |
1500 |
|
- |
| Cl-5.1(Wood and Any Other Lignocellulosic
Material) |
- |
1500 |
|
- |
| Cl-5.2(Adhesive) |
- |
7500 |
|
If separate sampleprovided for testing |
| Cl-5.3(Sizing Material) |
- |
1000 |
|
- |
| Cl-5.4(Preservative Treatment) |
- |
1000 |
|
- |
| Cl-6(MANUFACTURE) |
- |
500 |
|
- |
|
14 Jan, 2029 |
-
- |
| 1532 |
Stellar Test House, Noida
| 8171606
| IS 302 : PART 1 (Spin Extractors) |
Spin Extractors |
- |
30000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 31(RESISTANCE TO RUSTING) |
- |
1000 |
|
- |
| 30(RESISTANCE TO HEAT, FIRE AND TRACKING) |
- |
1000 |
|
- |
| 29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION) |
- |
1000 |
|
- |
| 28(SCREWS AND CONNECTIONS) |
- |
500 |
|
- |
| 27(PROVISION FOR EARTHING) |
- |
500 |
|
- |
| 26(TERMINALS FOR EXTERNAL CONDUCTORS) |
- |
1000 |
|
- |
| 25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS) |
- |
1000 |
|
- |
| 24(COMPONENTS) |
- |
1000 |
|
- |
| 23(INTERNAL WIRING) |
- |
1000 |
|
- |
| 22(CONSTRUCTION) |
- |
1000 |
|
- |
| 21(MECHANICAL STRENGTH) |
- |
1000 |
|
- |
| 20(STABILITY AND MECHANICAL HAZARDS) |
- |
1000 |
|
- |
| 19(ABNORMAL OPERATION) |
- |
1000 |
|
- |
| 17(OVERLOAD PROTECTION) |
- |
1000 |
|
- |
| 16(INSULATION RESISTANCE AND ELECTRIC STRENGTH (AFTER HUMIDITY TREATMENT)) |
- |
1000 |
|
- |
| 15(MOISTURE RESISTANCE) |
- |
1000 |
|
- |
| 13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE) |
- |
1000 |
|
- |
| 11(HEATING) |
- |
1000 |
|
- |
| 10(INPUT AND CURRENT) |
- |
1000 |
|
- |
| 9(STARTING OF MOTOR-OPERATED APPLIANCES) |
- |
1000 |
|
- |
| 8(PROTECTION AGAINST ELECTRIC SHOCK) |
- |
1000 |
|
- |
| 7(MARKING) |
- |
500 |
|
- |
| 6(CLASSIFICATION) |
- |
500 |
|
- |
| 5(RATING) |
- |
500 |
|
- |
| 4(GENERAL NOTES ON TESTS) |
- |
500 |
|
- |
| 3(GENERAL REQUIREMENTS) |
- |
500 |
|
- |
|
26 Sep, 2028 |
-
1.
19.11.4.7 (Harmonics) EMI/EMC Test Test facilities not available.
2.
19.11.4.6 (Class 3 Voltage dips and interruptions) EMI/EMC Test Test facilities not available.
3.
19.11.4.5 (Immunity to conducted discharges) EMI/EMC Test Test facilities not available.
4.
19.11.4.4 (Surge immunity test) EMI/EMC Test Test facilities not available.
5.
19.11.4.3 (Fast transient bursts) EMI/EMC Test Test facilities not available.
6.
19.11.4.2 (Radiated fields) EMI/EMC Test Test facilities not available.
7.
19.11.4.1 (Electrostatic discharges) EMI/EMC Test Test facilities not available.
8.
14 (RADIO AND TELEVISION INTERFERENCE SUPPRESSION) EMI/EMC Test Test facilities not available." |
| 1533 |
Akshat Test Lab & Calibration Services, Ghaziabad
| 8186526
| IS 302 : Part 2 : Sec 6 (2009) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision) |
6900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0(Classification) |
- |
500 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 7.0(Marking and instructions) |
- |
500 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 8.0(Protection against access to live part test) |
- |
1000 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 9.0(Starting of motor-operated appliances test) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 10.0(Power Input and current test) |
- |
1000 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 11.0(Heating test) |
- |
1500 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 13.0(Leakage current and electric strength test) |
- |
1500 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 14.0(Transient voltages) |
- |
1000 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 15.0(Moisture Resistance) |
- |
1500 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 16.0(Leakage current and electric strength test) |
- |
1500 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 17.0(Overload protection of transformers test) |
- |
1000 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 18.0(Endurance test) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 19.0(Abnormal Operations) |
- |
1500 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 20.0(Stability and Mechanical Hazards) |
- |
1000 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 21.0(Mechanical Strength) |
- |
1000 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 22.0(Construction verification related tests) |
- |
1500 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 23.0(Internal wiring) |
- |
1000 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 25.0(Supply connections and External Flexible Cords) |
- |
1500 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 26.0(Terminal for External Conductors) |
- |
1000 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 27.0(Provision for Earthing) |
- |
1000 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 28.0(Screws and connections) |
- |
1000 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 29.0(Clearances and Creepage distances and solid insulation) |
- |
1500 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 30.0(Resistance to heat and fire) |
- |
1500 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 31.0(Resistance to rusting) |
- |
1000 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 4(General Requirements) |
- |
500 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 5(General condition for the tests) |
- |
500 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 22.111(Pyrolytic self-cleaning) |
- |
1000 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 6.0(Classification) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 7.0(Marking and instructions) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 8.0(Protection against access to live part test) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 9.0(Starting of motor-operated appliances test) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 10.0(Power Input and current test) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 11.0(Heating test) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 13.0(Leakage current and electric strength test) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 14.0(Transient voltages) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 15.0(Moisture Resistance) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 16.0(Leakage current and electric strength test) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 17.0(Overload protection of transformers test) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 18.0(Endurance test) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 19.0(Abnormal Operations) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 20.0(Stability and Mechanical Hazards) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 21.0(Mechanical Strength) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 22.0(Construction verification related tests) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 23.0(Internal wiring) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 25.0(Supply connections and External Flexible Cords) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 26.0(Terminal for External Conductors) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 27.0(Provision for Earthing) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 28.0(Screws and connections) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 29.0(Clearances and Creepage distances and solid insulation) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 30.0(Resistance to heat and fire) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 31.0(Resistance to rusting) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 4(General Requirements) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 5(General condition for the tests) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
| 22.111(Pyrolytic self-cleaning) |
- |
0 |
|
For BIS type test 6900/- only.
For BIS acceptance tests 5000/- only.
For BIS routine tests 3500/- only.
For Others type test 25000/- only. |
|
- |
-
Included w.e.f. 03.06.2026
Exclusion:
"19.11.4.1 (Electrostatic discharges)
19.11.4.2 (Radiated fields)
19.11.4.3 (Fast transient bursts)
19.11.4.4 (Surge immunity test)
19.11.4.5 (Immunity to conducted discharges)
19.11.4.6 (Class 3 Voltage dips and interruptions)
19.11.4.7 (Harmonics)
24.0 (Components)
32.0 (Radiation, Toxicity and Similar hazards)
" |
| 1534 |
CIMEC Infralabs Private Limited
| 8195606
| IS 5509 (2021) |
Fire Retardant Plywood - Specification ( Third Revision ) |
All Types/Sizes and Thickness 3 mm to 25 mm |
15500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.3 (Table 1)(b) 6 mm and above) |
- |
500 |
|
- |
| 8.1(Dimensions) |
- |
1000 |
|
- |
| 8.2(Thickness) |
- |
500 |
|
- |
| 8.3, Taable-1 (i)(Tolerance- Length) |
- |
500 |
|
- |
| 9(WORKMANSHIP AND FINISH) |
- |
500 |
|
- |
| 11 (a)(For flammability) |
- |
1000 |
|
- |
| 11 (b)(For flame penetration) |
- |
1000 |
|
- |
| 11 (c)(For rate of burning) |
- |
1000 |
|
- |
| 12.1 Table - 2 (i)(Moisture content, percent, Max) |
- |
500 |
|
- |
| 12.1 Table - 2 (ii)(Flammability (see Note 1), minutes, Min) |
- |
1000 |
|
- |
| 12.1 Table - 2 (iii)(Flame penetration (see Note 2), minutes, Min) |
- |
1000 |
|
- |
| 12.1 Table - 2 (iv)(Rate of burning (see Note 3), minutes, Min) |
- |
1000 |
|
- |
| 12.2(Other Tests) |
- |
9500 |
|
- |
| 14(Marking) |
- |
200 |
|
- |
| Cl-8.3, Table-1 (ii)(Tolerances-Width) |
- |
500 |
|
- |
| Cl-8.3, Table-1 (iii)(Tolerances- Thickness) |
- |
500 |
|
- |
| Cl-8.3, Table-1 (iv)(Edge straightness) |
- |
500 |
|
- |
| Cl-8.3, Table-1 (v)(Squareness,) |
- |
500 |
|
- |
|
14 Jan, 2029 |
-
- |
| 1535 |
Standard Testing and Compliance Private Limited
| 6178726
| IS 16270 (2023) |
Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test |
- |
460000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4.1(Photovoltaic Energy System) |
- |
0 |
|
- |
| Cl-4.2(Secondary Cells and Batteries) |
- |
0 |
|
- |
| Cl-4.3(General Operating Conditions) |
- |
0 |
|
- |
| Cl-4.3.8(Storage) |
- |
0 |
|
- |
| Cl-4.3.9(Operating Temperature) |
- |
0 |
|
- |
| Cl-5.1(Mechanical Endurance) |
- |
0 |
|
- |
| Cl-5.2(Charge Efficiency) |
- |
0 |
|
- |
| Cl-5.3(Deep Discharge Protection) |
- |
0 |
|
- |
| Cl-5.4(Marking) |
- |
5000 |
|
- |
| Cl-5.5(Safety) |
- |
0 |
|
- |
| Cl-5.6(Documentation) |
- |
0 |
|
- |
| Cl-6(Functional characteristice) |
- |
0 |
|
- |
| Cl-7(General test conditions) |
- |
0 |
|
- |
| Cl-8.1(Capacity Test) |
- |
25000 |
|
- |
| Cl-8.2(Endurance Test) |
- |
150000 |
|
- |
| Cl-8.3(Charge Retention Test) |
- |
75000 |
|
- |
| Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions)) |
- |
100000 |
|
- |
| Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only)) |
- |
50000 |
|
- |
| Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only)) |
- |
50000 |
|
- |
| Cl-9.1(Type Tests) |
- |
0 |
|
- |
| Cl-9.2(Acceptance Test) |
- |
0 |
|
- |
| 4.3.7.1(Specific gravity) |
- |
5000 |
|
- |
|
10 Jul, 2027 |
-
Included w.e.f. 24.03.2026 |
| 1536 |
Stellar Test House, Noida
| 8171606
| IS 15489 (2024) |
Paint, Plastic Emulsion —Specification |
All Grade / Type / Size / Designation |
25000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-6.1(Composition) |
- |
3500 |
|
- |
| Cl-6.7(Fastness to Light) |
- |
1500 |
|
- |
| Cl-6.9(Lead Restriction) |
- |
1500 |
|
- |
| Cl-6.10, Table-1 (v)(Colour) |
- |
1000 |
|
- |
| Cl-6.2(Conditions in the Container) |
- |
0 |
|
- |
| Cl-6.3(Thinning) |
- |
0 |
|
- |
| Cl-6.4(Application Properties) |
- |
1500 |
|
- |
| Cl-6.10, Table-1 (vii)(Resistance to alkali) |
- |
1500 |
|
- |
| Cl-6.10, Table-1 (x)(Recoating properties) |
- |
1500 |
|
- |
| Cl-6.10, Table-1 (xi)(Volatile organic compound, gm/litre) |
- |
1500 |
|
- |
| Cl-6.5(Mass in kg/10 litres) |
- |
500 |
|
- |
| Cl-6.6(Opacity) |
- |
1500 |
|
- |
| Cl-6.8.1(Registered Sample) |
- |
1000 |
|
- |
| Cl-6.8.2(Sample from Bulk Supply) |
- |
1000 |
|
- |
| Cl-6.10, Table-1 (i)(Consistency) |
- |
1000 |
|
- |
| Cl-6.10, Table-1 (ii)("Drying time, Max
a) Surface dry
b) Hard dry:") |
- |
2000 |
|
- |
| Cl-6.10, Table-1 (iii)(Finish) |
- |
500 |
|
- |
| Cl-6.10, Table-1 (iv)(Gloss at 60°: Class A, B, C, D) |
- |
1500 |
|
- |
| Cl-6.10, Table-1 (vi)(Fastness to light) |
- |
1500 |
|
- |
| Cl-6.10, Table-1 (viii)(Washability and cleanability) |
- |
1000 |
|
- |
| Cl-6.10, Table-1 (ix)(Accelerated storage stability) |
- |
1500 |
|
- |
| Cl-6.12(Additional Optional Requirements for ECO-Mark) |
- |
0 |
|
- |
| Cl-6.12.2(Specific Requirements) |
- |
0 |
|
- |
|
26 Sep, 2028 |
-
Included w.e.f. 22.06.2026 |
| 1537 |
Shri Krishna Test House
| 8122336
| IS 18573 (2024) |
Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes � Specification |
ALL GRADES |
17000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause. 3.0(Types) |
- |
17000 |
|
- |
| Clause.4.0(Carbon) |
- |
17000 |
|
- |
| Clause.4.0(Sulphur) |
- |
17000 |
|
- |
| Clause.4.0(Sulphur) |
- |
17000 |
|
- |
| Clause.4.0(Phosphorus) |
- |
17000 |
|
- |
| Clause.4.0(Silicon) |
- |
17000 |
|
- |
| Clause.4.0(Manganese) |
- |
17000 |
|
- |
| Clause.5.0(Supply of Material) |
- |
17000 |
|
- |
| Clause.5.0(Supply of Material) |
- |
17000 |
|
- |
| Clause.6.0(Workmanship) |
- |
17000 |
|
- |
| Clause.7.0(Straightness) |
- |
17000 |
|
- |
| Clause.8.0(Basis of Calculation) |
- |
17000 |
|
- |
| Clause.9.0(Length) |
- |
17000 |
|
- |
| Clause.10.0(Dimensions and properties) |
- |
17000 |
|
- |
| Clause.10.0(Dimensions and properties) |
- |
17000 |
|
- |
| Clause.11.0(General) |
- |
17000 |
|
- |
| Clause.11.0(Outside Dimension) |
- |
17000 |
|
- |
| Clause.11.0(Thickness) |
- |
17000 |
|
- |
| Clause.11.0(Thickness) |
- |
17000 |
|
- |
| Clause.11.0(Concavity and Convexity) |
- |
17000 |
|
- |
| Clause.11.0(Squareness of Sides) |
- |
17000 |
|
- |
| Clause.11.0(External Corner Radiius) |
- |
17000 |
|
- |
| Clause.11.0(Straightness and twist) |
- |
17000 |
|
- |
| Clause.12.0(Dimension Tolerances) |
- |
17000 |
|
- |
| Clause.12.0(Dimension Tolerances) |
- |
17000 |
|
- |
| Clause.13.0(Surface Protection) |
- |
17000 |
|
- |
| Clause.14.0(Testing) |
- |
17000 |
|
- |
| Clause.15.0(Tensile test) |
- |
17000 |
|
- |
| Clause.15.0(Yield strength) |
- |
17000 |
|
- |
| Clause.15.0(Elognation Percent) |
- |
17000 |
|
- |
| Clause.18.0(Marking) |
- |
17000 |
|
- |
| 6(Workmanship) |
- |
17000 |
|
- |
| 10(Dimensions and Properties) |
- |
17000 |
|
- |
| 11(Measurement of Shape and Size) |
- |
17000 |
|
- |
| 12(Dimensions and Tolerances) |
- |
17000 |
|
- |
| 13(Surface Protection) |
- |
17000 |
|
- |
| 15(Tensile Test) |
- |
17000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1538 |
Shri Krishna Test House
| 8122336
| IS 16218 (2014) |
Forks - Specification |
ALL |
12000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(food grade stainless steel.) |
- |
12000 |
|
- |
| 3.2 (i)(Brass as parent material) |
- |
12000 |
|
- |
| 3.2(ii)(Brass plated with pure silver) |
- |
12000 |
|
- |
| 3.3(Plastic handle) |
- |
12000 |
|
- |
| 4(Shapes and Dimensions) |
- |
12000 |
|
- |
| 5(Manufacture) |
- |
12000 |
|
- |
| 6.1(Workmanship) |
- |
12000 |
|
- |
| 6.2(Finish) |
- |
12000 |
|
- |
| 9(Marking) |
- |
12000 |
|
- |
| 10(Packing) |
- |
12000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1539 |
Shri Krishna Test House
| 8122336
| IS 9730 (2008) |
Non - Stick unreinforced plastics coatings on domestic cooking utensils - Specification (First Revision) |
ALL TYPES |
3000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(Material) |
- |
3000 |
|
- |
| 4.2(Visual Defects) |
- |
3000 |
|
- |
| 4.3 & 7.2(Thickness) |
- |
3000 |
|
- |
| 4.4 & 7.3(Non-stick Quality) |
- |
3000 |
|
- |
| 4.5 & 7.4(Salt Water Corrosion Resistance) |
- |
3000 |
|
- |
| 4.6, 7.5.2 & 7.5.3(Adhesion Test) |
- |
3000 |
|
- |
| 5(Marking) |
- |
3000 |
|
- |
| 6(Instructions for use) |
- |
3000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1540 |
Shri Krishna Test House
| 8122336
| IS 734 (1975) |
Specification for wrought aluminium and aluminium alloy forging stock and forgings (For General Engineering Purposes) (Second Revision) |
ALL DRADE/TYPES |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 table 1(chemical composition) |
- |
10000 |
|
- |
| 5.1 table 2(0.2% proof strength) |
- |
10000 |
|
- |
| 5.1 table 2(Tensile strength) |
- |
10000 |
|
- |
| 5.1 table 2(Elongation) |
- |
10000 |
|
- |
| Cl.5.1(Aluminium - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Copper - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Magnesium - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Silicon - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Iron - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Manganese - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Zinc - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Titanium And/or Other Grain Refining Elements - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Chromium - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Remarks (Cu + Mg + Si + Fe + Mn + Zn) - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| 4.1(Freedom from defects) |
- |
10000 |
|
- |
| 9.1(Tensile test) |
- |
10000 |
|
- |
| 5.1 table 1(chemical composition) |
- |
10000 |
|
- |
| 5.1 table 2(0.2% proof strength) |
- |
10000 |
|
- |
| 5.1 table 2(Tensile strength) |
- |
10000 |
|
- |
| 5.1 table 2(Elongation) |
- |
10000 |
|
- |
| Cl.5.1(Aluminium - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Copper - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Magnesium - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Silicon - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Iron - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Manganese - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Zinc - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Titanium And/or Other Grain Refining Elements - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Chromium - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| Cl.5.1(Remarks (Cu + Mg + Si + Fe + Mn + Zn) - IS 504 and its parts or any other intrumental/chemical methods) |
- |
10000 |
|
- |
| 4.1(Freedom from defects) |
- |
10000 |
|
- |
| 9.1(Tensile test) |
- |
10000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1541 |
Shri Krishna Test House
| 8122336
| IS 15558 (2024) |
INSTANTANEOUS DOMESTIC WATER HEATER FOR USE WITH LPG SPECIFICATION First Revision of IS 15558 |
ALL TYPES |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4(General Requirements) |
- |
15000 |
|
- |
| Cl-5.1(water heater) |
- |
15000 |
|
- |
| Cl-5.2(copper and copper alloy) |
- |
15000 |
|
- |
| Cl-5.3(Non-metallic materials) |
- |
15000 |
|
- |
| Cl-5.4(Mixing tube and burner head) |
- |
15000 |
|
- |
| Cl-6.3(All Water connections) |
- |
15000 |
|
- |
| Cl-6.4(water inlet and outlet connections) |
- |
15000 |
|
- |
| Cl-6.6(Gas Inlet Connections) |
- |
15000 |
|
- |
| Cl-7(Flame visibility) |
- |
15000 |
|
- |
| Cl-8(Gas Taps) |
- |
15000 |
|
- |
| Cl-9(Flame failuse device) |
- |
15000 |
|
- |
| Cl-11(Protection against accidental overheating) |
- |
15000 |
|
- |
| Cl-13(General condition of test) |
- |
15000 |
|
- |
| Cl-14(Gas Soundness) |
- |
15000 |
|
- |
| Cl-15(Water Soundness) |
- |
15000 |
|
- |
| Cl-16(Thermal efficiency) |
- |
15000 |
|
- |
| Cl-17(carbon monoxide/carbon dioxide) |
- |
15000 |
|
- |
| Cl-18(Gas Consumption) |
- |
15000 |
|
- |
| Cl-19(Ignition and flame travel) |
- |
15000 |
|
- |
| Cl-20(FLAME STABILITY) |
- |
15000 |
|
- |
| Cl-21(NOISE CONTROL) |
- |
15000 |
|
- |
| Cl-22(FLASH-BACK) |
- |
15000 |
|
- |
| Cl-24("FIRE HAZARDS AND LIMITING
TEMPERATURE") |
- |
15000 |
|
- |
| Cl-25(TIME FOR TEMPERATURE RISE) |
- |
15000 |
|
- |
| Cl-26(HOT WATER OUTPUT TEST) |
- |
15000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1542 |
Shri Krishna Test House
| 8122336
| IS 18755 (2024) |
Tri-ply SS-AL-SS material used for manufacture of utensils and kitchen appliances Specification |
All types |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-4(Supply of material and designation) |
- |
15000 |
|
OK |
| Cl-5(Manufacturer) |
- |
15000 |
|
OK |
| Cl-6(Aluminium for use as matrix) |
- |
15000 |
|
OK |
| Cl-6(Top-surface of the aluminium matrix) |
- |
15000 |
|
OK |
| Cl-6(Bottom-surface of the aluminium matrix) |
- |
15000 |
|
OK |
| Cl-7.1.1(Tensile properties) |
- |
15000 |
|
OK |
| Cl-7.1.1(Apparent Yield Strength) |
- |
15000 |
|
OK |
| Cl-7.1.1(Tensile Strength Mpa,) |
- |
15000 |
|
OK |
| Cl-7.1.2(Test Specimen) |
- |
15000 |
|
OK |
| Cl-7.1.3(Test Parameters) |
- |
15000 |
|
OK |
| Cl-7.2.1(Bond strength of Tri-Ply) |
- |
15000 |
|
OK |
| Cl-7.2.2(Sample Preparation and Test Specimen) |
- |
15000 |
|
OK |
| Cl-7.2.3(Test Apparatus) |
- |
15000 |
|
OK |
| Cl-7.2.4(Procedure) |
- |
15000 |
|
OK |
| Cl-8.1(Sample of suitable size) |
- |
15000 |
|
OK |
| Cl-8.2(specimen for peel strength) |
- |
15000 |
|
OK |
| Cl-8.3, table-3(T-Peel Strength, N/mm, Min SS304 and Al 19500 interface) |
- |
15000 |
|
OK |
| Cl-8.3, table-3(T-Peel Strength, N/mm, Min SS430 and Al 19500 interface) |
- |
15000 |
|
OK |
| Cl-9.1(Thickness) |
- |
15000 |
|
OK |
| Cl-9.2(Diameter) |
- |
15000 |
|
OK |
| Cl-9.3(Flatness) |
- |
15000 |
|
OK |
| Cl-10(surface finish) |
- |
15000 |
|
OK |
| Cl-11(Workmanship, finish and appearance) |
- |
15000 |
|
OK |
| Cl-14(Marking) |
- |
15000 |
|
OK |
|
05 Oct, 2028 |
-
- |
| 1543 |
Shri Krishna Test House
| 8122336
| IS 14756 (2024) |
Stainless Steel Utensils - Specification (THIRD REVISION) |
All Types |
30000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 3.1(Material used for manufacturing utensils) |
- |
30000 |
|
- |
| Cl 3.2(Material used for composite bottom) |
- |
30000 |
|
- |
| Cl 3.3(Material used for body of utensil of 3-ply construction) |
- |
30000 |
|
- |
| Cl 3.4(Material used for stainless steel lid) |
- |
30000 |
|
- |
| Cl 3.5(Material used for tempered glass lid) |
- |
30000 |
|
- |
| Cl 3.5(Material used for stainless steel rim) |
- |
30000 |
|
- |
| Cl 4.2 & Table 1(Minimum Sheet Thickness for Body of Utensil) |
- |
30000 |
|
- |
| Cl 4.2 & Table 2(Minimum Sheet Thickness for Lid of Utensil) |
- |
30000 |
|
- |
| Cl 4.2(Thickness of the finished utensil) |
- |
30000 |
|
- |
| Cl 4.3(Classification) |
- |
30000 |
|
- |
| Cl 4.4 (i)(Thickness of Aluminium disc/core) |
- |
30000 |
|
- |
| Cl 4.4 (ii)(Thickness of Protector/cowl) |
- |
30000 |
|
- |
| Cl 4.5(Minimum sheet thickness (3-ply utensil)) |
- |
30000 |
|
- |
| Cl 4.5(Thickness of finished utensil (3-ply utensil)) |
- |
30000 |
|
- |
| Cl 5.1(Manufacturing defect & visual appearance) |
- |
30000 |
|
- |
| CL 5.2(Accessibility for cleaning) |
- |
30000 |
|
- |
| Cl 5.3(Joining of handles to the utensils) |
- |
30000 |
|
- |
| Cl 5.4(Requirement for handles) |
- |
30000 |
|
- |
| Cl 5.5(Welding (Finish)) |
- |
30000 |
|
- |
| Cl 5.6(Finish of 3-ply utensil) |
- |
30000 |
|
- |
| Cl 5.7(Requirement for coating) |
- |
30000 |
|
- |
| Cl 5.8(Coating thickness test) |
- |
30000 |
|
- |
| Cl 5.8(Coating adhesion test) |
- |
30000 |
|
- |
| Cl 5.8.1(Thermal shock test (Coating)) |
- |
30000 |
|
- |
| Cl 6.1(Staining Test (Type Test - Frequency Once in a Year)) |
- |
30000 |
|
- |
| Cl 6.2(Mechanical Shock Test (for Cladded Utensils Only)) |
- |
30000 |
|
- |
| Cl 6.3(Thermal Shock Test (for Cladded Utensils Only)) |
- |
30000 |
|
- |
| Cl 6.4(Dry Heat Test (for Cladded Utensils Only)) |
- |
30000 |
|
- |
| Cl 6.5(Coating Thickness Test (for Copper Deposit)) |
- |
30000 |
|
- |
| Cl 6.6(Thermal shock test (3-ply construction utensil body)) |
- |
30000 |
|
- |
| Cl 6.7(Nominal Capacity Test) |
- |
30000 |
|
- |
| Cl 8(Marking) |
- |
30000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1544 |
Shri Krishna Test House
| 8122336
| IS 13049 (1991) |
diaphragm type (plastic body) float operated valves for cold water services |
ALL TYPES |
35000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4(NOMINAL SIZE- ) |
- |
35000 |
|
Ok |
| 5-5.1-Table 1-Sr. no.1)(MATERIALS- Valve Body, Inlet Shank, Valve Seat and back Nut-Polyacetal) |
- |
35000 |
|
Ok |
| 5-5.1-Table 1-Sr. no.2)(MATERIALS- Discharge horn (If Provided)-Polyacetal or polypropylene or polyethylene or Acrylnitrile Butadiene Styrene (ABS) or Ethylene Vinyl Acetate (EVA) or any other suitable material) |
- |
35000 |
|
Ok |
| 5-5.1-Table 1-Sr. no.3)(MATERIALS- Discharge horn (If Provided)-Polyacetal or polypropylene or polyethylene or Acrylnitrile Butadiene Styrene (ABS) or Ethylene Vinyl Acetate (EVA) or any other suitable material) |
- |
35000 |
|
Ok |
| 5-5.2(MATERIALS) |
- |
35000 |
|
Ok |
| 5-5.2(MATERIALS) |
- |
35000 |
|
Ok |
| 6-6.1(MANUFACTURE AND WORKMANSHIP) |
- |
35000 |
|
Ok |
| 6-6.2(MANUFACTURE AND WORKMANSHIP) |
- |
35000 |
|
Ok |
| 7-7.1(CONSTRUCTION-Inlet Connection- The inlet shank shall be not less than 48 mm In length.) |
- |
35000 |
|
Ok |
| 7-7.1-Annex A(CONSTRUCTION-Inlet Connection- External screw on inlet connections
shall be such as to meet the test requirements of Annex A.) |
- |
35000 |
|
Ok |
| 7-7.2-7.2.1(CONSTRUCTION-Seats and body) |
- |
35000 |
|
Ok |
| 7-7.2-7.2.2(CONSTRUCTION-Seats and body-In case of detachable type of seats, colour ccding as given below shall be followed ;) |
- |
35000 |
|
Ok |
| 7-7.2-7.2.2(CONSTRUCTION-Seats and body-In case of detachable type of seats, colour ccding as given below shall be followed ;) |
- |
35000 |
|
Ok |
| 7-7.2-7.2.3(CONSTRUCTION-Seats and body-The distance between the seat outlet orifice and the shutting off face of the diaphragm shall be 15 mm, Min in the fully opened position.) |
- |
35000 |
|
Ok |
| 7-7.3(CONSTRUCTION-Diaphragm-Diaphragms made of synthetic rubber shall have
the form and dimensions as required for the
operation of the valve.) |
- |
35000 |
|
Ok |
| 7-7.4(CONSTRUCTION-Back Nuts-Annex A) |
- |
35000 |
|
Ok |
| 7-7.4(CONSTRUCTION-Back Nuts-Threads on backnuts shall also comply WIth the test requirements of Annex A.) |
- |
35000 |
|
Ok |
| 7-7.5(CONSTRUCTION-Floats, Float Arm and Assembly-) |
- |
35000 |
|
Ok |
| 7-7.5-7.5.1(CONSTRUCTION-Floats, Float Arm and Assembly-) |
- |
35000 |
|
Ok |
| 7-7.5-7.5.2(CONSTRUCTION-Floats, Float Arm and Assembly-) |
- |
35000 |
|
Ok |
| 7-7.5-7.5.3(CONSTRUCTION-Floats, Float Arm and Assembly-Annex B Initial Deflection shall not be more than 25 mm) |
- |
35000 |
|
Ok |
| 7-7.5-7.5.3(CONSTRUCTION-Floats, Float Arm and Assembly-Annex B Additiononal deflection after loading for
28 days as specified in Annex B shall not be more than 12 mm) |
- |
35000 |
|
Ok |
| 7-7.5-7.5.3(CONSTRUCTION-Floats, Float Arm and Assembly-Annex B Total deflection thus shall not he more than 37 mm) |
- |
35000 |
|
Ok |
| 7-7.6-7.6.1(CONSTRUCTION-Discharge Arrangements) |
- |
35000 |
|
Ok |
| 7-7.6-7.6.2(CONSTRUCTION-Discharge Arrangements) |
- |
35000 |
|
Ok |
| 7-7.6-7.6.3(CONSTRUCTION-Discharge Arrangements) |
- |
35000 |
|
Ok |
| 8-8.1(PERFORMANCE TEST-Hydraulic Test) |
- |
35000 |
|
Ok |
| 8-8.2(PERFORMANCE TEST-Shut Off Test-Annex C) |
- |
35000 |
|
Ok |
| 8-8.3(PERFORMANCE TEST-Antisiphonage Test-Annex D) |
- |
35000 |
|
Ok |
| 8-8.4(PERFORMANCE TEST-Flow Test- Annex E) |
- |
35000 |
|
Ok |
| 8-8.5(PERFORMANCE TEST-Endurance Test-Annex F) |
- |
35000 |
|
Ok |
| 8-8.6(PERFORMANCE TEST-Test for Hydraulic Pressure on Discbarge Arrangements-Annex G) |
- |
35000 |
|
Ok |
| 4(NOMINAL SIZE- ) |
- |
35000 |
|
Ok |
| 5-5.1-Table 1-Sr. no.1)(MATERIALS- Valve Body, Inlet Shank, Valve Seat and back Nut-Polyacetal) |
- |
35000 |
|
Ok |
| 5-5.1-Table 1-Sr. no.2)(MATERIALS- Discharge horn (If Provided)-Polyacetal or polypropylene or polyethylene or Acrylnitrile Butadiene Styrene (ABS) or Ethylene Vinyl Acetate (EVA) or any other suitable material) |
- |
35000 |
|
Ok |
| 5-5.1-Table 1-Sr. no.3)(MATERIALS- Discharge horn (If Provided)-Polyacetal or polypropylene or polyethylene or Acrylnitrile Butadiene Styrene (ABS) or Ethylene Vinyl Acetate (EVA) or any other suitable material) |
- |
35000 |
|
Ok |
| 5-5.2(MATERIALS) |
- |
35000 |
|
Ok |
| 5-5.2(MATERIALS) |
- |
35000 |
|
Ok |
| 6-6.1(MANUFACTURE AND WORKMANSHIP) |
- |
35000 |
|
Ok |
| 6-6.2(MANUFACTURE AND WORKMANSHIP) |
- |
35000 |
|
Ok |
| 7-7.1(CONSTRUCTION-Inlet Connection- The inlet shank shall be not less than 48 mm In length.) |
- |
35000 |
|
Ok |
| 7-7.1-Annex A(CONSTRUCTION-Inlet Connection- External screw on inlet connections
shall be such as to meet the test requirements of Annex A.) |
- |
35000 |
|
Ok |
| 7-7.2-7.2.1(CONSTRUCTION-Seats and body) |
- |
35000 |
|
Ok |
| 7-7.2-7.2.2(CONSTRUCTION-Seats and body-In case of detachable type of seats, colour ccding as given below shall be followed ;) |
- |
35000 |
|
Ok |
| 7-7.2-7.2.2(CONSTRUCTION-Seats and body-In case of detachable type of seats, colour ccding as given below shall be followed ;) |
- |
35000 |
|
Ok |
| 7-7.2-7.2.3(CONSTRUCTION-Seats and body-The distance between the seat outlet orifice and the shutting off face of the diaphragm shall be 15 mm, Min in the fully opened position.) |
- |
35000 |
|
Ok |
| 7-7.3(CONSTRUCTION-Diaphragm-Diaphragms made of synthetic rubber shall have
the form and dimensions as required for the
operation of the valve.) |
- |
35000 |
|
Ok |
| 7-7.4(CONSTRUCTION-Back Nuts-Annex A) |
- |
35000 |
|
Ok |
| 7-7.4(CONSTRUCTION-Back Nuts-Threads on backnuts shall also comply WIth the test requirements of Annex A.) |
- |
35000 |
|
Ok |
| 7-7.5(CONSTRUCTION-Floats, Float Arm and Assembly-) |
- |
35000 |
|
Ok |
| 7-7.5-7.5.1(CONSTRUCTION-Floats, Float Arm and Assembly-) |
- |
35000 |
|
Ok |
| 7-7.5-7.5.2(CONSTRUCTION-Floats, Float Arm and Assembly-) |
- |
35000 |
|
Ok |
| 7-7.5-7.5.3(CONSTRUCTION-Floats, Float Arm and Assembly-Annex B Initial Deflection shall not be more than 25 mm) |
- |
35000 |
|
Ok |
| 7-7.5-7.5.3(CONSTRUCTION-Floats, Float Arm and Assembly-Annex B Additiononal deflection after loading for
28 days as specified in Annex B shall not be more than 12 mm) |
- |
35000 |
|
Ok |
| 7-7.5-7.5.3(CONSTRUCTION-Floats, Float Arm and Assembly-Annex B Total deflection thus shall not he more than 37 mm) |
- |
35000 |
|
Ok |
| 7-7.6-7.6.1(CONSTRUCTION-Discharge Arrangements) |
- |
35000 |
|
Ok |
| 7-7.6-7.6.2(CONSTRUCTION-Discharge Arrangements) |
- |
35000 |
|
Ok |
| 7-7.6-7.6.3(CONSTRUCTION-Discharge Arrangements) |
- |
35000 |
|
Ok |
| 8-8.1(PERFORMANCE TEST-Hydraulic Test) |
- |
35000 |
|
Ok |
| 8-8.2(PERFORMANCE TEST-Shut Off Test-Annex C) |
- |
35000 |
|
Ok |
| 8-8.3(PERFORMANCE TEST-Antisiphonage Test-Annex D) |
- |
35000 |
|
Ok |
| 8-8.4(PERFORMANCE TEST-Flow Test- Annex E) |
- |
35000 |
|
Ok |
| 8-8.5(PERFORMANCE TEST-Endurance Test-Annex F) |
- |
35000 |
|
Ok |
| 8-8.6(PERFORMANCE TEST-Test for Hydraulic Pressure on Discbarge Arrangements-Annex G) |
- |
35000 |
|
Ok |
| 4(NOMINAL SIZE- ) |
- |
35000 |
|
Ok |
| 5-5.1-Table 1-Sr. no.1)(MATERIALS- Valve Body, Inlet Shank, Valve Seat and back Nut-Polyacetal) |
- |
35000 |
|
Ok |
| 5-5.1-Table 1-Sr. no.2)(MATERIALS- Discharge horn (If Provided)-Polyacetal or polypropylene or polyethylene or Acrylnitrile Butadiene Styrene (ABS) or Ethylene Vinyl Acetate (EVA) or any other suitable material) |
- |
35000 |
|
Ok |
| 5-5.1-Table 1-Sr. no.3)(MATERIALS- Discharge horn (If Provided)-Polyacetal or polypropylene or polyethylene or Acrylnitrile Butadiene Styrene (ABS) or Ethylene Vinyl Acetate (EVA) or any other suitable material) |
- |
35000 |
|
Ok |
| 5-5.2(MATERIALS) |
- |
35000 |
|
Ok |
| 5-5.2(MATERIALS) |
- |
35000 |
|
Ok |
| 6-6.1(MANUFACTURE AND WORKMANSHIP) |
- |
35000 |
|
Ok |
| 6-6.2(MANUFACTURE AND WORKMANSHIP) |
- |
35000 |
|
Ok |
| 7-7.1(CONSTRUCTION-Inlet Connection- The inlet shank shall be not less than 48 mm In length.) |
- |
35000 |
|
Ok |
| 7-7.1-Annex A(CONSTRUCTION-Inlet Connection- External screw on inlet connections
shall be such as to meet the test requirements of Annex A.) |
- |
35000 |
|
Ok |
| 7-7.2-7.2.1(CONSTRUCTION-Seats and body) |
- |
35000 |
|
Ok |
| 7-7.2-7.2.2(CONSTRUCTION-Seats and body-In case of detachable type of seats, colour ccding as given below shall be followed ;) |
- |
35000 |
|
Ok |
| 7-7.2-7.2.2(CONSTRUCTION-Seats and body-In case of detachable type of seats, colour ccding as given below shall be followed ;) |
- |
35000 |
|
Ok |
| 7-7.2-7.2.3(CONSTRUCTION-Seats and body-The distance between the seat outlet orifice and the shutting off face of the diaphragm shall be 15 mm, Min in the fully opened position.) |
- |
35000 |
|
Ok |
| 7-7.3(CONSTRUCTION-Diaphragm-Diaphragms made of synthetic rubber shall have
the form and dimensions as required for the
operation of the valve.) |
- |
35000 |
|
Ok |
| 7-7.4(CONSTRUCTION-Back Nuts-Annex A) |
- |
35000 |
|
Ok |
| 7-7.4(CONSTRUCTION-Back Nuts-Threads on backnuts shall also comply WIth the test requirements of Annex A.) |
- |
35000 |
|
Ok |
| 7-7.5(CONSTRUCTION-Floats, Float Arm and Assembly-) |
- |
35000 |
|
Ok |
| 7-7.5-7.5.1(CONSTRUCTION-Floats, Float Arm and Assembly-) |
- |
35000 |
|
Ok |
| 7-7.5-7.5.2(CONSTRUCTION-Floats, Float Arm and Assembly-) |
- |
35000 |
|
Ok |
| 7-7.5-7.5.3(CONSTRUCTION-Floats, Float Arm and Assembly-Annex B Initial Deflection shall not be more than 25 mm) |
- |
35000 |
|
Ok |
| 7-7.5-7.5.3(CONSTRUCTION-Floats, Float Arm and Assembly-Annex B Additiononal deflection after loading for
28 days as specified in Annex B shall not be more than 12 mm) |
- |
35000 |
|
Ok |
| 7-7.5-7.5.3(CONSTRUCTION-Floats, Float Arm and Assembly-Annex B Total deflection thus shall not he more than 37 mm) |
- |
35000 |
|
Ok |
| 7-7.6-7.6.1(CONSTRUCTION-Discharge Arrangements) |
- |
35000 |
|
Ok |
| 7-7.6-7.6.2(CONSTRUCTION-Discharge Arrangements) |
- |
35000 |
|
Ok |
| 7-7.6-7.6.3(CONSTRUCTION-Discharge Arrangements) |
- |
35000 |
|
Ok |
| 8-8.1(PERFORMANCE TEST-Hydraulic Test) |
- |
35000 |
|
Ok |
| 8-8.2(PERFORMANCE TEST-Shut Off Test-Annex C) |
- |
35000 |
|
Ok |
| 8-8.3(PERFORMANCE TEST-Antisiphonage Test-Annex D) |
- |
35000 |
|
Ok |
| 8-8.4(PERFORMANCE TEST-Flow Test- Annex E) |
- |
35000 |
|
Ok |
| 8-8.5(PERFORMANCE TEST-Endurance Test-Annex F) |
- |
35000 |
|
Ok |
| 8-8.6(PERFORMANCE TEST-Test for Hydraulic Pressure on Discbarge Arrangements-Annex G) |
- |
35000 |
|
Ok |
|
05 Oct, 2028 |
-
- |
| 1545 |
Shri Krishna Test House
| 8122336
| IS 12234 (2021) |
Plastic equilibrium float valves for cold water services - Specification (first revision) |
All types |
35000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5(Materials) |
- |
35000 |
|
Ok |
| 6(Manufacture and Workmanship) |
- |
35000 |
|
Ok |
| 7.1 to 7.3 , 7.6 to 7.9(Construction) |
- |
35000 |
|
Ok |
| 7.4 to 7.5 and 7.10(Dimensions, Screw threads and Back nut) |
- |
35000 |
|
Ok |
| 8.1.1, 8.1.2(Hydraulic and Shut-Off Test) |
- |
35000 |
|
Ok |
| 8.2 Appendix-A(Antisiphonage Test) |
- |
35000 |
|
Ok |
| 8.3 Appendix-B(Flow Test) |
- |
35000 |
|
Ok |
| 8.4 Appendix-C(Endurance Test) |
- |
35000 |
|
Ok |
| 10(Marking) |
- |
35000 |
|
Ok |
|
05 Oct, 2028 |
-
- |
| 1546 |
Shri Krishna Test House
| 8122336
| IS 16286 (2014) |
Spoons - Specification |
All Types |
14500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(food grade stainless steel.) |
- |
14500 |
|
Ok |
| 3.2 (i)(Brass as parent material) |
- |
14500 |
|
Ok |
| 3.2(ii)(Brass plated with pure silver) |
- |
14500 |
|
Ok |
| 3.3(Plastic handle) |
- |
14500 |
|
Ok |
| 4(Shapes and Dimensions) |
- |
14500 |
|
Ok |
| 5.1(Manufacture) |
- |
14500 |
|
Ok |
| 5.2(Workmanship) |
- |
14500 |
|
Ok |
| 5.3(Finish) |
- |
14500 |
|
Ok |
| 8(Marking) |
- |
14500 |
|
Ok |
| 9(Packing) |
- |
14500 |
|
Ok |
| Cl-6.1(Staining Test) |
- |
14500 |
|
Ok |
| Cl-6.2(Bending Test) |
- |
14500 |
|
Ok |
| Cl-6.3(Load Test) |
- |
14500 |
|
Ok |
| Cl-6.4.1(Boiling) |
- |
14500 |
|
Ok |
| Cl-6.4.2(Impact) |
- |
14500 |
|
Ok |
| Cl-6.4.3(Staining) |
- |
14500 |
|
Ok |
|
05 Oct, 2028 |
-
- |
| 1547 |
Shri Krishna Test House
| 8122336
| IS 737 (2024) |
WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision) |
ALL |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. 4(Ordering Information - IS 737) |
- |
20000 |
|
- |
| Cl. 4 (a)(Grade/ Thickness - IS 737) |
- |
20000 |
|
- |
| Cl. 4 (b)(Condition - IS 737) |
- |
20000 |
|
- |
| Cl. 4 (c)(Quantity in Kg - IS 737) |
- |
20000 |
|
- |
| Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737) |
- |
20000 |
|
- |
| Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737) |
- |
20000 |
|
- |
| Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737) |
- |
20000 |
|
- |
| Cl. 4 (g)(Packing Mode - IS 737) |
- |
20000 |
|
- |
| Cl. 5(Supply for Material - IS 737/ IS 10259) |
- |
20000 |
|
- |
| Cl. 6(Freedom from Defects - IS 737) |
- |
20000 |
|
- |
| Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035) |
- |
20000 |
|
- |
| Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035) |
- |
20000 |
|
- |
| Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035) |
- |
20000 |
|
- |
| Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035) |
- |
20000 |
|
- |
| Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035) |
- |
20000 |
|
- |
| Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035) |
- |
20000 |
|
- |
| Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035) |
- |
20000 |
|
- |
| Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035) |
- |
20000 |
|
- |
| Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035) |
- |
20000 |
|
- |
| Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035) |
- |
20000 |
|
- |
| Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035) |
- |
20000 |
|
- |
| Cl. 7(Al - IS 504) |
- |
20000 |
|
- |
| Cl. 8(Mechanical Properties - IS 1608 (Part-1)) |
- |
20000 |
|
- |
| Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1)) |
- |
20000 |
|
- |
| Cl. 8.1(Tensile Strength - IS 1608 (Part-1)) |
- |
20000 |
|
- |
| Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1)) |
- |
20000 |
|
- |
| Cl. 8.2(Bend Test - IS 1599) |
- |
20000 |
|
- |
| Cl. 9(Condition - IS 737/ IS 5052) |
- |
20000 |
|
- |
| Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676) |
- |
20000 |
|
- |
| Cl. 11(Selection of Test Samples - IS 737) |
- |
20000 |
|
- |
| Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737) |
- |
20000 |
|
- |
| Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737) |
- |
20000 |
|
- |
| Cl. 12(Retests - IS 737/ IS 10259) |
- |
20000 |
|
- |
| Cl. 13(Packaging - IS 737/ IS 10259) |
- |
20000 |
|
- |
| Cl. 13.1(Marking - IS 737) |
- |
20000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1548 |
Shri Krishna Test House
| 8122336
| IS 739 (1992) |
Wrought aluminium and aluminium alloys - Wire for general engineering purposes - Specification (Third Revision) |
All Grades |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.0(Freedom from defects) |
- |
20000 |
|
- |
| 7.0(Dimension and Tolerances) |
- |
20000 |
|
- |
| 8.1 Table-1(Al) |
- |
20000 |
|
- |
| 8.1 Table-1(Cu) |
- |
20000 |
|
- |
| 8.1 Table-1(Mg) |
- |
20000 |
|
- |
| 8.1 Table-1(Si) |
- |
20000 |
|
- |
| 8.1 Table-1(Fe) |
- |
20000 |
|
- |
| 8.1 Table-1(Mn) |
- |
20000 |
|
- |
| 8.1 Table-1(Zn) |
- |
20000 |
|
- |
| 8.1 Table-1(Ti) |
- |
20000 |
|
- |
| 8.1 Table-1(Cr) |
- |
20000 |
|
- |
| 9.1(Tensile Strength) |
- |
20000 |
|
- |
| 9.3(Wrapping Test) |
- |
20000 |
|
- |
| 10(Selection of Test Samples) |
- |
20000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1549 |
Shri Krishna Test House
| 8122336
| IS 8931 (2021) |
Copper alloy single taps, combination tap assemblies, stop valves and single lever mixers for water services Specification (second revision) |
Pillar Tap, Bib Tap, Combination Tap Assembly, Stop Valve, Angle Stop Valve, Single Level mixer |
38000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4(Classfication) |
- |
38000 |
|
Ok |
| Cl 4(Classfication) |
- |
38000 |
|
Ok |
| Cl 6.1(Manufacture,Workmanship & Construction) |
- |
38000 |
|
Ok |
| Cl 6.5(Manufacture,Workmanship & Construction) |
- |
38000 |
|
Ok |
| Cl 6.6(Manufacture,Workmanship & Construction) |
- |
38000 |
|
Ok |
| Cl 6.7(Manufacture,Workmanship & Construction) |
- |
38000 |
|
Ok |
| Cl 6.8(Manufacture,Workmanship & Construction) |
- |
38000 |
|
Ok |
| Cl 6.9(Manufacture,Workmanship & Construction) |
- |
38000 |
|
Ok |
| Cl 6.10(Manufacture,Workmanship & Construction) |
- |
38000 |
|
Ok |
| Cl 6.11(Manufacture,Workmanship & Construction) |
- |
38000 |
|
Ok |
| Cl 6.12(Manufacture,Workmanship & Construction) |
- |
38000 |
|
Ok |
| Cl 6.13(Manufacture,Workmanship & Construction) |
- |
38000 |
|
Ok |
| Cl 7(DIMENSIONS) |
- |
38000 |
|
Ok |
| Cl 7(DIMENSIONS) |
- |
38000 |
|
Ok |
| Cl 7(DIMENSIONS) |
- |
38000 |
|
Ok |
| Cl 7(DIMENSIONS) |
- |
38000 |
|
Ok |
| Cl 7(DIMENSIONS) |
- |
38000 |
|
Ok |
| Cl 8(ADDITIONAL REQUIREMENTS FOR ACCESSIBLE TAPS) |
- |
38000 |
|
Ok |
| Cl 10(PERFORMANCE REQUIREMENTS) |
- |
38000 |
|
Ok |
| Cl 10(PERFORMANCE REQUIREMENTS) |
- |
38000 |
|
Ok |
| Cl 10(PERFORMANCE REQUIREMENTS) |
- |
38000 |
|
Ok |
| Cl 10(PERFORMANCE REQUIREMENTS) |
- |
38000 |
|
Ok |
| Cl 10(PERFORMANCE REQUIREMENTS) |
- |
38000 |
|
Ok |
| Cl 11(ADDITIONAL REQUIREMENTS FOR WATER EFFICIENCY) |
- |
38000 |
|
Ok |
| As per Table-1(Carbon) |
- |
38000 |
|
Ok |
| As per Table-1(Sulphur) |
- |
38000 |
|
Ok |
| As per Table-1(Phosphorus) |
- |
38000 |
|
Ok |
| As per Table-1(Manganese) |
- |
38000 |
|
Ok |
| As per Table-1(Nitrogen) |
- |
38000 |
|
Ok |
| As per Table-1(Silicon) |
- |
38000 |
|
Ok |
| As per Table-1(Aluminium) |
- |
38000 |
|
Ok |
| As per Table-1(Chromium) |
- |
38000 |
|
Ok |
| As per Table-1(Vanadium) |
- |
38000 |
|
Ok |
| As per Table-1(Molybdenum) |
- |
38000 |
|
Ok |
| As per Table-1(Iron) |
- |
38000 |
|
Ok |
| As per Table-1(Nickel) |
- |
38000 |
|
Ok |
| As per Table-1(Copper) |
- |
38000 |
|
Ok |
| As per Table-1(Zinc) |
- |
38000 |
|
Ok |
| As per Table-1(Lead) |
- |
38000 |
|
Ok |
| As per Table-1(Boron) |
- |
38000 |
|
Ok |
|
05 Oct, 2028 |
-
- |
| 1550 |
Shri Krishna Test House
| 8122336
| IS 1264 (1997) |
Brass gravity die castings - Specification (Fourth Revision) |
- |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.0(Freedom from defects) |
- |
15000 |
|
- |
| 6.0(Shape) |
- |
15000 |
|
- |
| 6.0(Size) |
- |
15000 |
|
- |
| 6.0(Mass) |
- |
15000 |
|
- |
| 7.0(Cu) |
- |
15000 |
|
- |
| 7.0(Sn) |
- |
15000 |
|
- |
| 7.0(Pb) |
- |
15000 |
|
- |
| 7.0(Ni) |
- |
15000 |
|
- |
| 7.0(Fe) |
- |
15000 |
|
- |
| 7.0(Al) |
- |
15000 |
|
- |
| 7.0(Mn) |
- |
15000 |
|
- |
| 7.0(Si) |
- |
15000 |
|
- |
| 7.0(Total impurities excluding Ni Pb Al Zn) |
- |
15000 |
|
- |
| 9.0(Pressure test) |
- |
15000 |
|
- |
| 11(Marking) |
- |
15000 |
|
- |
| 11(Marking) |
- |
15000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1551 |
Shri Krishna Test House
| 8122336
| IS 6603 (2024) |
Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars â Specification (Second Revision) |
- |
55000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl - 9.1,9.5,13.2(Thickness or Diameter) |
- |
55000 |
|
- |
| Cl - 9.1,9.5,13.2(Proof Strength Rp 0.2 MP) |
- |
55000 |
|
- |
| Cl - 9.1,9.5,13.2(Proof Strength Rp 1.0 MP) |
- |
55000 |
|
- |
| Cl - 9.1,9.5,13.2(Tensile Strength) |
- |
55000 |
|
- |
| Cl - 9.1,9.5,13.2(Elongation After Fracture Long.) |
- |
55000 |
|
- |
| Cl - 9.1,9.5,13.2(Elongation After Fracture Tr.) |
- |
55000 |
|
- |
| Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Long.) |
- |
55000 |
|
- |
| Cl - 9.1,9.5,13.2(Impact Energy (ISO-V) Tr.) |
- |
55000 |
|
- |
| Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Delivery Condition) |
- |
55000 |
|
- |
| Cl - 9.1,9.5,13.2(Resistance to Inter-Granular Corrosion in the Sensitized Condition) |
- |
55000 |
|
- |
| Cl - 9.1,9.5,13.2(Hardness) |
- |
55000 |
|
- |
| Cl - 9.1,9.5,13.2(Elongation After Fracture) |
- |
55000 |
|
- |
| Cl - 9.1,9.5,13.2(Impact Energy (ISO-V)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(Thickness or Diameter) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(R MPa Max(Annealed)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(Hardness HB Max(Annealed)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(Heat Treatment Condition (Quenched + Tempered)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(R 0.2 MPa Min(Quenched + Tempered)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(R Mpa(Quenched + Tempered)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Long.(Quenched + Tempered)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(A Percent Min Tr.(Quenched + Tempered)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered)) |
- |
55000 |
|
- |
| Cl - 9.1,9.3,9.4,9.5,13.2(KV J Min Long.(Quenched + Tempered)) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 450 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 500 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 550 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 100 Deg. C.) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 150 Deg. C.) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 200 Deg. C.) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 250 Deg. C.) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 300 Deg. C.) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 350 Deg. C.) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 400 Deg. C.) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 450 Deg. C.) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 1 Percent Proof Strength at 550 Deg. C.) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 300 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 350 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 400 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 100 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 150 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 200 Deg. C) |
- |
55000 |
|
- |
| Cl - 9.2(Minimum 0.2 Percent Proof Strength at 250 Deg. C) |
- |
55000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1552 |
Shri Krishna Test House
| 8122336
| IS 302 : Part 2 : SEC 31 (2009) |
Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods |
- |
34000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause No - 5(GENERAL CONDITIONS FOR THE TESTS) |
- |
34000 |
|
- |
| Clause No - 5.18(linear and angular dimension) |
- |
34000 |
|
- |
| Clause No - 6.2(harmfull ingress of water) |
- |
34000 |
|
- |
| Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE
PART- test probe B") |
- |
34000 |
|
- |
| Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE
PART - test probe 13") |
- |
34000 |
|
- |
| Clause No - 8.2(Addition) |
- |
34000 |
|
- |
| Clause No - 10.1, Table No. -1(power input deviation) |
- |
34000 |
|
- |
| Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC
STRENGTH AT OPERATING TEMPERATURE") |
- |
34000 |
|
- |
| Clause No - 13.3,Table No.- 4(voltage for electrical strength) |
- |
34000 |
|
- |
| Clause No - 14(Impulse test voltage) |
- |
34000 |
|
- |
| Clause No - 15.1.1(MOISTURE RESISTANCE) |
- |
34000 |
|
- |
| Clause No -19.7(test is repeated with the capacitor short circuited) |
- |
34000 |
|
- |
| Clause No -19.11.4.1(electrostatic discharge) |
- |
34000 |
|
- |
| Clause No -19.11.4.2(radiated field) |
- |
34000 |
|
- |
| Clause No -19.11.4.3(fast transient) |
- |
34000 |
|
- |
| Clause No -19.11.4.4(Voltage dips and interruption) |
- |
34000 |
|
- |
| Clause No -21.1(Mechanical strength) |
- |
34000 |
|
- |
| Clause No -22.1(construction) |
- |
34000 |
|
- |
| Clause No -22.11(push force applied) |
- |
34000 |
|
- |
| Clause No -24.1.2(safety isolating transformer) |
- |
34000 |
|
- |
| Clause No -24.1.3(for switches) |
- |
34000 |
|
- |
| Clause No -24.1.4(for automatic control) |
- |
34000 |
|
- |
| Clause No -24.1.5(for innterconnection couplers) |
- |
34000 |
|
- |
| Clause No -24.4(plug and socket) |
- |
34000 |
|
- |
| Clause No -25.8, Table no -11(conductor resistance) |
- |
34000 |
|
- |
| Clause No -25.5(dimension for pins) |
- |
34000 |
|
- |
| Clause No -27.6(for circuit board) |
- |
34000 |
|
- |
| Clause No -29.2(comparative tracking index) |
- |
34000 |
|
- |
| Clause No -29.3.3(dry heat test) |
- |
34000 |
|
- |
| Clause No -30.2.1(glow wire test) |
- |
34000 |
|
- |
| Clause No -30.101("incorporate combustible
material") |
- |
34000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1553 |
Shri Krishna Test House
| 8122336
| IS 617 (2024) |
Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision) |
- |
6000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl-6.1, Table-1(Si) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Fe) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Cu) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Mn) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Mg) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Cr) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Ni) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Zn) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Pb) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Sn) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Ti) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Others elements Each) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Others elements Total) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Aluminium) |
- |
6000 |
|
- |
| Cl-6.2(The chemical analysis) |
- |
6000 |
|
- |
| Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength) |
- |
6000 |
|
- |
| Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress) |
- |
6000 |
|
- |
| Cl-7.1, Table-2(Sand-Cast Alloys- Elongation) |
- |
6000 |
|
- |
| Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW) |
- |
6000 |
|
- |
| Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength) |
- |
6000 |
|
- |
| Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress) |
- |
6000 |
|
- |
| Cl-7.1, Table-3(Chill Cast Alloys- Elongation) |
- |
6000 |
|
- |
| Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW) |
- |
6000 |
|
- |
| Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength) |
- |
6000 |
|
- |
| Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress) |
- |
6000 |
|
- |
| Cl-7.1, Table-4(Investment-Cast Alloys- Elongation) |
- |
6000 |
|
- |
| Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness) |
- |
6000 |
|
- |
| Cl-7.2(Tensile Tests) |
- |
6000 |
|
- |
| Cl-7.3(Test Pieces) |
- |
6000 |
|
- |
| Cl-7.4(Hardness) |
- |
6000 |
|
- |
| Cl-8(Freedom from Defects) |
- |
6000 |
|
- |
| Cl-11(RETEST) |
- |
6000 |
|
- |
| Cl-13(Marking) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Si) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Fe) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Cu) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Mn) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Mg) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Cr) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Ni) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Zn) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Pb) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Sn) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Ti) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Others elements Each) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Others elements Total) |
- |
6000 |
|
- |
| Cl-6.1, Table-1(Aluminium) |
- |
6000 |
|
- |
| Cl-6.2(The chemical analysis) |
- |
6000 |
|
- |
| Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength) |
- |
6000 |
|
- |
| Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress) |
- |
6000 |
|
- |
| Cl-7.1, Table-2(Sand-Cast Alloys- Elongation) |
- |
6000 |
|
- |
| Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW) |
- |
6000 |
|
- |
| Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength) |
- |
6000 |
|
- |
| Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress) |
- |
6000 |
|
- |
| Cl-7.1, Table-3(Chill Cast Alloys- Elongation) |
- |
6000 |
|
- |
| Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW) |
- |
6000 |
|
- |
| Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength) |
- |
6000 |
|
- |
| Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress) |
- |
6000 |
|
- |
| Cl-7.1, Table-4(Investment-Cast Alloys- Elongation) |
- |
6000 |
|
- |
| Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness) |
- |
6000 |
|
- |
| Cl-7.2(Tensile Tests) |
- |
6000 |
|
- |
| Cl-7.3(Test Pieces) |
- |
6000 |
|
- |
| Cl-7.4(Hardness) |
- |
6000 |
|
- |
| Cl-8(Freedom from Defects) |
- |
6000 |
|
- |
| Cl-11(RETEST) |
- |
6000 |
|
- |
| Cl-13(Marking) |
- |
6000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1554 |
Shri Krishna Test House
| 8122336
| IS/ISO 9994 (2018) |
Lighters Safety specifications First Revision |
- |
17000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.6, 6.6.3.1(Refilling test-IS/ISO 9994) |
- |
17000 |
|
Ok |
| 6.6, 6.6.3.2(Refilling test-IS/ISO 9994) |
- |
17000 |
|
Ok |
| Cl.4(Flame Generation) |
- |
17000 |
|
Ok |
| Cl.4.2(Flame Height) |
- |
17000 |
|
Ok |
| Cl.4.3(Flame-Height adjustment) |
- |
17000 |
|
Ok |
| Cl.4.4(Resistance to spitting or sputtering and flaring) |
- |
17000 |
|
Ok |
| Cl.4.5(Flame Extinction) |
- |
17000 |
|
Ok |
| Cl.4.6(Volumetric displacement of Fuel) |
- |
17000 |
|
Ok |
| Cl.4.7(Mass of Fuel) |
- |
17000 |
|
Ok |
| Cl.5.1(External Finish) |
- |
17000 |
|
Ok |
| Cl.5.2(Compatibility of Fuel) |
- |
17000 |
|
Ok |
| Cl.5.3(Resistance to Fuel Loss) |
- |
17000 |
|
Ok |
| Cl.5.4(Resistance to dropping) |
- |
17000 |
|
Ok |
| Cl.5.5(Resistance to elevated Temperature) |
- |
17000 |
|
Ok |
| Cl.5.6(Resistance to internal Pressure) |
- |
17000 |
|
Ok |
| Cl.5.7(Burning Behavior) |
- |
17000 |
|
Ok |
| Cl.5.8(Resistance to cyclic burning) |
- |
17000 |
|
Ok |
| Cl.5.9(Resistance to Continue Burning) |
- |
17000 |
|
Ok |
|
05 Oct, 2028 |
-
- |
| 1555 |
Shri Krishna Test House
| 8122336
| IS 617 (1994) |
Cast aluminium and its alloys - Ingots and castings for general engineering purposes - Specification (Third Revision) |
- |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 9(TOLERANCES ON DIMENSIONS OF CASTINGS) |
- |
20000 |
|
- |
| 7(FREEDOM FROM DEFECTS) |
- |
20000 |
|
- |
| 6.2(Hardness) |
- |
20000 |
|
- |
| 6, Table 2.(MECHANICAL PROPERTIES OF CASTINGS) |
- |
20000 |
|
- |
| 5, Table 1.(Chemical Composition) |
- |
20000 |
|
- |
| 17(Marking) |
- |
20000 |
|
- |
| 11() |
- |
20000 |
|
- |
| 11(Pressure Test) |
- |
20000 |
|
- |
| 17(Marking) |
- |
20000 |
|
- |
| 11(Pressure Test) |
- |
20000 |
|
- |
| 11(Pressure Test - IS 617) |
- |
20000 |
|
- |
| 13(Marking) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Copper) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Iron) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Magnesium) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Manganese) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Tin) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Silicon) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Nickel) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Zinc) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Other elements (each)) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Other elements (Total)) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Aluminium) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Titanium) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Lead) |
- |
20000 |
|
- |
| 9(TOLERANCES ON DIMENSIONS OF CASTINGS) |
- |
20000 |
|
- |
| 7(FREEDOM FROM DEFECTS) |
- |
20000 |
|
- |
| 6.2(Hardness) |
- |
20000 |
|
- |
| 6, Table 2.(MECHANICAL PROPERTIES OF CASTINGS) |
- |
20000 |
|
- |
| 5, Table 1.(Chemical Composition) |
- |
20000 |
|
- |
| 17(Marking) |
- |
20000 |
|
- |
| 11() |
- |
20000 |
|
- |
| 11(Pressure Test) |
- |
20000 |
|
- |
| 17(Marking) |
- |
20000 |
|
- |
| 11(Pressure Test) |
- |
20000 |
|
- |
| 11(Pressure Test - IS 617) |
- |
20000 |
|
- |
| 13(Marking) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Copper) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Iron) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Magnesium) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Manganese) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Tin) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Silicon) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Nickel) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Zinc) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Other elements (each)) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Other elements (Total)) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Aluminium) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Titanium) |
- |
20000 |
|
- |
| Table-1, Clause - 5.1(Lead) |
- |
20000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1556 |
Shri Krishna Test House
| 8122336
| IS 15355 (2018) |
Rubber hoses and hose assemblies for liquefied petroleum gas (L.p.g) in motor vehicles - Specification (First Revision) |
- |
40000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1 ,TABLE 1(Internal diameter) |
- |
40000 |
|
- |
| 5.2(Concentricity) |
- |
40000 |
|
- |
| 5.3(Length) |
- |
40000 |
|
- |
| 6.1(Performance requirements) |
- |
40000 |
|
- |
| 6.2(Visual examination) |
- |
40000 |
|
- |
| 6.3(Rubber compounds) |
- |
40000 |
|
- |
| 6.4(Finished hose) |
- |
40000 |
|
- |
| 7.1(Requirements for fittings) |
- |
40000 |
|
- |
| 7.2(Requirements for fittings) |
- |
40000 |
|
- |
| 8.1(Gas leakage) |
- |
40000 |
|
- |
| 8.2(Minimum burst pressure) |
- |
40000 |
|
- |
| 8.3(Visual examination) |
- |
40000 |
|
- |
| 9.1(Marking) |
- |
40000 |
|
- |
| 9.2(Marking) |
- |
40000 |
|
- |
| 5.1 ,TABLE 1(Internal diameter) |
- |
40000 |
|
- |
| 5.2(Concentricity) |
- |
40000 |
|
- |
| 5.3(Length) |
- |
40000 |
|
- |
| 6.1(Performance requirements) |
- |
40000 |
|
- |
| 6.2(Visual examination) |
- |
40000 |
|
- |
| 6.3(Rubber compounds) |
- |
40000 |
|
- |
| 6.4(Finished hose) |
- |
40000 |
|
- |
| 7.1(Requirements for fittings) |
- |
40000 |
|
- |
| 7.2(Requirements for fittings) |
- |
40000 |
|
- |
| 8.1(Gas leakage) |
- |
40000 |
|
- |
| 8.2(Minimum burst pressure) |
- |
40000 |
|
- |
| 8.3(Visual examination) |
- |
40000 |
|
- |
| 9.1(Marking) |
- |
40000 |
|
- |
| 9.2(Marking) |
- |
40000 |
|
- |
| 6.3, Table 2(Minimum Tensile Strength-Lining - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Minimum Tensile Strength-Cover - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Minimum Elongation at Break -Lining - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Minimum Elongation at Break -Cover - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to Ageing (3 days at (100±1)²C using the air-oven method in ISO 188:2007- Change in Tensile strength from original value -Lining (±, max) - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to Ageing (3 days at (100±1)²C using the air-oven method in ISO 188:2007- Change in Tensile strength from original value -Cover (±, max) - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to Ageing (3 days at (100±1)²C using the air-oven method in ISO 188:2007- Change in Elongation at break from original value -Lining - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to Ageing (3 days at (100±1)²C using the air-oven method in ISO 188:2007- Change in Elongation at break from original value -Cover - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Tensile strength from original value -Lining (±, max) - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Tensile strength from original value -Cover (±, max) - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Elongation at break from original value -Lining (±, max) - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Elongation at break from original value -Cover (±, max) - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Volume-Lining (±, max) - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Volume-Cover (±, max) - ISO 37) |
- |
40000 |
|
- |
| 6.4, Table 3(Proof Pressure- ISO 1402, hold for 10 miniute) |
- |
40000 |
|
- |
| 6.4, Table 3(Minimum Burst Pressure -ISO 1402) |
- |
40000 |
|
- |
| 6.4, Table 3(Adhesion between lining and reinforcement and between reinforcement and cover (min) - ISO 8033) |
- |
40000 |
|
- |
| 6.4, Table 3(Ozone Resistance -ISO 7326:2006, method 2 ; Ozone concentration (100±5) parts per million ; Temperature (40±1) °C and 50±5 % Relative Humidity for 72 h at 20% Elongation) |
- |
40000 |
|
- |
| 6.4, Table 3(Low Temperature flexibility - ISO 4672-1997, method B at ( -40 ± 2 )°C) |
- |
40000 |
|
- |
| 6.4, Table 3(Permeability to propane gas (max) - ISO 4080-2009, method 3 ; use hose size 19 for test , adjust waterbath temperature to maintain a hose pressure of ( 1 ± 0.02 ) Mpa (0.007 cm³/(m².s) or 36.0 cm³/m of hose in 24 h) |
- |
40000 |
|
- |
| 6.3, Table 2(Minimum Tensile Strength-Lining - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Minimum Tensile Strength-Cover - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Minimum Elongation at Break -Lining - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Minimum Elongation at Break -Cover - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to Ageing (3 days at (100±1)²C using the air-oven method in ISO 188:2007- Change in Tensile strength from original value -Lining (±, max) - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to Ageing (3 days at (100±1)²C using the air-oven method in ISO 188:2007- Change in Tensile strength from original value -Cover (±, max) - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to Ageing (3 days at (100±1)²C using the air-oven method in ISO 188:2007- Change in Elongation at break from original value -Lining - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to Ageing (3 days at (100±1)²C using the air-oven method in ISO 188:2007- Change in Elongation at break from original value -Cover - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Tensile strength from original value -Lining (±, max) - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Tensile strength from original value -Cover (±, max) - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Elongation at break from original value -Lining (±, max) - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Elongation at break from original value -Cover (±, max) - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Volume-Lining (±, max) - ISO 37) |
- |
40000 |
|
- |
| 6.3, Table 2(Resistance to n-Pentane (Immersion for 72 hours att (23±2)²C in accordance with ISO 1817 - Change in Volume-Cover (±, max) - ISO 37) |
- |
40000 |
|
- |
| 6.4, Table 3(Proof Pressure- ISO 1402, hold for 10 miniute) |
- |
40000 |
|
- |
| 6.4, Table 3(Minimum Burst Pressure -ISO 1402) |
- |
40000 |
|
- |
| 6.4, Table 3(Adhesion between lining and reinforcement and between reinforcement and cover (min) - ISO 8033) |
- |
40000 |
|
- |
| 6.4, Table 3(Ozone Resistance -ISO 7326:2006, method 2 ; Ozone concentration (100±5) parts per million ; Temperature (40±1) °C and 50±5 % Relative Humidity for 72 h at 20% Elongation) |
- |
40000 |
|
- |
| 6.4, Table 3(Low Temperature flexibility - ISO 4672-1997, method B at ( -40 ± 2 )°C) |
- |
40000 |
|
- |
| 6.4, Table 3(Permeability to propane gas (max) - ISO 4080-2009, method 3 ; use hose size 19 for test , adjust waterbath temperature to maintain a hose pressure of ( 1 ± 0.02 ) Mpa (0.007 cm³/(m².s) or 36.0 cm³/m of hose in 24 h) |
- |
40000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1557 |
Shri Krishna Test House
| 8122336
| IS 737 (2008) |
Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes - Specification (Fourth Revision) |
- |
8000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.0(Freedom from defects) |
- |
8000 |
|
- |
| 6 Table-1(Al) |
- |
8000 |
|
- |
| 6 Table-1(Cu) |
- |
8000 |
|
- |
| 6 Table-1(Mg) |
- |
8000 |
|
- |
| 6 Table-1(Si) |
- |
8000 |
|
- |
| 6 Table-1(Fe) |
- |
8000 |
|
- |
| 6 Table-1(Mn) |
- |
8000 |
|
- |
| 6 Table-1(Zn) |
- |
8000 |
|
- |
| 6 Table-1(Ti) |
- |
8000 |
|
- |
| 6 Table-1(Cr) |
- |
8000 |
|
- |
| 6 Table-1(Cu+Si+Fe) |
- |
8000 |
|
- |
| 6 Table-1(Cu+Si+Fe+Mn+Zn) |
- |
8000 |
|
- |
| 6 Table-1(Cu+Mg+Si+Fe+Mn+Zn) |
- |
8000 |
|
- |
| 6 Table-1(Zr) |
- |
8000 |
|
- |
| 6 Table-1(Cr+Mn) |
- |
8000 |
|
- |
| 7 Table-2(Tensile Strength) |
- |
8000 |
|
- |
| 7 Table-2(Elongation) |
- |
8000 |
|
- |
| 7 Table-2(0.2 % Proof Stress) |
- |
8000 |
|
- |
| 7 Table-2(Bend Test) |
- |
8000 |
|
- |
| 9(Dimension - IS 2676) |
- |
8000 |
|
- |
| 12(Marking) |
- |
8000 |
|
- |
| 9(Dimension - IS 2676) |
- |
8000 |
|
- |
| 12(Marking) |
- |
8000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1558 |
Shri Krishna Test House
| 8122336
| IS 6912 (2005) |
Copper and copper alloys forging stock and forging - Specification (Second Revision) |
- |
6000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl. No.4(SUPPLY OF MATERIAL) |
- |
6000 |
|
- |
| Cl. No.6(Freedom from defects) |
- |
6000 |
|
- |
| Cl. No.7, Table no. 1("DIMENSIONS AND TOLERANCES
") |
- |
6000 |
|
- |
| Cl. No.8.1, Table no.2(i)(Electrolytic tough pitch through copper) |
- |
6000 |
|
- |
| Cl. No.8.1, Table no.2(ii)(Fire refined high conductivity copper) |
- |
6000 |
|
- |
| Cl. No.8.1, Table no.2(iii)(Phosporus deoxidised arsenical copper) |
- |
6000 |
|
- |
| Cl. No.8.1, Table no.3(Chemical Composition and Mechanical Properties of Brasses) |
- |
6000 |
|
- |
| Cl.no.8.1, Table no. 4(Chemical Composition and Mechanical Properties of Bronzes) |
- |
6000 |
|
- |
| Cl.no.9(Mechanical properties) |
- |
6000 |
|
- |
| Cl.no.10(Forgability Test) |
- |
6000 |
|
- |
| Cl. No. 11(Mercurous Nitrate Test (For Forgings)) |
- |
6000 |
|
- |
| Cl. No.15(Marking) |
- |
6000 |
|
- |
| Cl. No.4(SUPPLY OF MATERIAL) |
- |
6000 |
|
- |
| Cl. No.6(Freedom from defects) |
- |
6000 |
|
- |
| Cl. No.7, Table no. 1("DIMENSIONS AND TOLERANCES
") |
- |
6000 |
|
- |
| Cl. No.8.1, Table no.2(i)(Electrolytic tough pitch through copper) |
- |
6000 |
|
- |
| Cl. No.8.1, Table no.2(ii)(Fire refined high conductivity copper) |
- |
6000 |
|
- |
| Cl. No.8.1, Table no.2(iii)(Phosporus deoxidised arsenical copper) |
- |
6000 |
|
- |
| Cl. No.8.1, Table no.3(Chemical Composition and Mechanical Properties of Brasses) |
- |
6000 |
|
- |
| Cl.no.8.1, Table no. 4(Chemical Composition and Mechanical Properties of Bronzes) |
- |
6000 |
|
- |
| Cl.no.9(Mechanical properties) |
- |
6000 |
|
- |
| Cl.no.10(Forgability Test) |
- |
6000 |
|
- |
| Cl. No. 11(Mercurous Nitrate Test (For Forgings)) |
- |
6000 |
|
- |
| Cl. No.15(Marking) |
- |
6000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1559 |
Shri Krishna Test House
| 8122336
| IS 10908 (2023) |
FLEXIBLE RUBBER TUBING FOR LIQUEFIED PETROLEUM GAS SPECIFICATION Second Revision |
- |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.1(The materials used in the manufacture of tubing shall be homogeneous and shall be resistant to outdoor exposure.) |
- |
20000 |
|
- |
| 4.1(The tubing made out of this material shall be green in colour and shall be supplied normally in cut lengths or in rolls of running length) |
- |
20000 |
|
- |
| 4.1("when supplied in cut lengths, the pieces
shall be of minimum 1.0 m to maximum of 1.5 m in length.
") |
- |
20000 |
|
- |
| 4.2(The walls shall be seamless and free from all visible defects, such as lumps, blow-holes, cracks etc and the bore shall be clean and free from loose particles which might be carried forward by the gas.) |
- |
20000 |
|
- |
| 4.3.1(The tubing when supplied in 6.4 mm inside diameter; the tolerance as per table-1) |
- |
20000 |
|
- |
| 4.3.1(The tubing when supplied in 7.00 mm inside diameter; the tolerance as per table-1) |
- |
20000 |
|
- |
| 4.3.2(It shall comply with thickness as given in Table 1, when measured according to IS 443 (Part 8). The readings shall be taken on a set of six test pieces cut from different sample sections.(For Wall thickness 3.20 mm)) |
- |
20000 |
|
- |
| 4.3.2(It shall comply with thickness as given in Table 1, when measured according to IS 443 (Part 8). The readings shall be taken on a set of six test pieces cut from different sample sections.(For Wall thickness 3.50 mm)) |
- |
20000 |
|
- |
| 4.4.1(When tested in accordance with the method given in Annex B, the tubing shall fit over the standard and oversize metal nozzle shown in Fig. 1, 2 and 3.) |
- |
20000 |
|
- |
| 4.4.2("When tested in accordance with the method given in Annex B, the tubing shall remain attached to both nozzles throughout the test period.
") |
- |
20000 |
|
- |
| 4.5(When immersed in water for 5 min under an internal air pressure of 0.25 MPa or 250 kPa (2.5 bar), the increase in the outside diameter or the tubing shall not be more than 15 percent.) |
- |
20000 |
|
- |
| 4.5(When immersed in water for 5 min under an internal air pressure of 0.25 MPa or 250 kPa (2.5 bar), there shall be no sign of leakage in the tubing. Also the same shall not burst when the pressure is increased to 0.5 MPa or 500 kPa (5 bar), The test shall be carried out on a length of 60 cm.) |
- |
20000 |
|
- |
| 4.6(The hardness on the flat surface of the cut/slit tubing shall be measured as prescribed in IS 3400 (Part 2/Sec 4), the shore hardness shall be 60 ± 5°A.) |
- |
20000 |
|
- |
| 4.7("The flexible tubing or suitable portion of the tubing shall be subjected to accelerated ageing at a temperature of 100 °C for 72 h in accordance with the normal method prescribed in IS 3400 (Part 4). It shall not show a change of + 10° A of its original
shore hardness value (see 4.6) after accelerated ageing") |
- |
20000 |
|
- |
| 4.8.1("The tubing shall be immersed for 72 h in liquid pentane and then conditioned at room temperature for 24 h, after which it shall be tested in accordance with the method prescribed in Annex C, the gas pressure shown on the manometer shall not drop by
more than 1 kPa") |
- |
20000 |
|
- |
| 4.8.2(The tubing shall be so flexible that it will make contact with a cylindrical former of radius 68 mm for at least 110° of its circumference when the immersed tubing is placed over the former and a mass of 1.6 kg is attached to each end.) |
- |
20000 |
|
- |
| 4.9(60 cm long tubing shall be subjected to a crushing force of 350 N applied on the middle of the tubing evenly over a length of 25 mm for 5 minutes, and 30 min after removal of the force it shall not show any deformation or collapse, nor shall it leak when subjected to an internal air pressure of 250 kPa) |
- |
20000 |
|
- |
| 4.10(When tested in accordance with Annex D, the npentane absorbed shall not exceed 15 percent of the initial mass of the tubing and the amount of npentane extractable matter shall not exceed 10 percent of the initial mass of tubing.) |
- |
20000 |
|
- |
| 4.11("When tested in accordance with the method
described in Annex E, the slit tube shall not show any breakage on surface or cracks or defects.") |
- |
20000 |
|
- |
| 4.12("When tested in accordance with the method
described in Annex F, the tubing shall not burn to either of the outer marks within the test period of 45 s") |
- |
20000 |
|
- |
|
05 Oct, 2028 |
-
- |
| 1560 |
Shri Krishna Test House
| 8122336
| IS 1285 (2023) |
WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS EXTRUDED ROUND TUBE AND HOLLOW SECTIONS FOR GENERAL ENGINEERINGPURPOSES SPECIFICATION |
- |
15000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1("The extruded round tube and hollow sections
shall be sound and visually free from harmful
defects. ") |
- |
15000 |
|
- |
| 6.2(Slight discoloration due to heat treatment, minor polishing marks and spiral marks due to roll straightening shall not be a cause for rejection.) |
- |
15000 |
|
- |
| 8("Dimensions and tolerances of the material shall be as laid down in the Indian Standards indicated
below:
a) Extruded round tube IS 2673; and
b) Extruded hollow sections IS 6477.") |
- |
15000 |
|
- |
| 9(" Extruded round tubes and hollow sections shall be made from alloys specified in IS 733.
9.2 The chemical analysis of the material shall be carried out either in accordance with the methods specified in IS 504 (Part 1 to 12) and IS 504 (Part 13 to 16) or by any other established instrumental/chemical method. In case of any dispute the method specified in relevant parts of IS 504 shall be used as referee method. However, when the method is not given in IS 504, the referee method shall be as agreed to between the purchaser
and the manufacturer. ") |
- |
15000 |
|
- |
| 10(Tensile test) |
- |
15000 |
|
- |
|
05 Oct, 2028 |
-
- |
