BIS - LIMS (Laboratory Information Management System)

BIS, Southern Regional Laboratory (SRL)

IV CROSS ROAD, CIT CAMPUS, TARAMANI, CHENNAI-600113, TAMILNADU, CHENNAI, Chennai, Tamil Nadu, 600113

- srol@bis.gov.in

Scope List

Reset

278 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

Rs 11950/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.0 (Types)	-
7.2 (DIMENSIONS & TOLERANCES )	-
7.2 (DIMENSIONS & TOLERANCES )	-
7.3 (DIMENSIONS & TOLERANCES )	-
7.4 (DIMENSIONS & TOLERANCES )	-
7.4 (DIMENSIONS & TOLERANCES )	-
8.1 (WORKMANSHIP AND FINISH )	-
10.1.1 (MOISTURE CONTENT)	-
10.1.2, 10.1.2.1 (Table-1) (GLUE ADHESION IN DRY STATE)	-
10.1.2, 10.1.2.2 (GLUE ADHESION IN DRY STATE)	-
10.1.3, 10.1.3.1.1 (Table-1) (RESISTANCE TO WATER TEST)	-
10.1.3, 10.1.3.1.2 (RESISTANCE TO WATER TEST)	-
10.1.4 (RESISTANCE TO WATER TEST)	-
10.1.5 (MYCOLOGICAL TEST )	-
10.1.5, 10.1.5.1 (Table-1) (MYCOLOGICAL TEST )	-
10.1.5.2 (MYCOLOGICAL TEST )	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Sum of the Tensile Strength in two directions))	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Perpendicular to grain))	-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Parallel to grain))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-
12, 12.1 (MARKING)	-

-
Quantity Required: 2 Nos of Full Sheets

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

Please check remarks View breakup
BWR Grade- Rs. 5900 MR Grade- Rs. 6800 Spot test- Rs. 2650

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9.2.1 (Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-
9.2.6 (Spot test - Annexure L)	-
9.2.5 (Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-
9.2.5 (Modulus of elasticity - AVERAGE - Annexure K)	-
9.2.5 (Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-
9.2.5 (Modulus of rupture - AVERAGE - Annexure K)	-
9.2.4 (Mycological Test [for MR grade only] - Annexure J)	-
9.2.3 (Adhesion of Plies - Annexure H)	-
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-
9.2.1 (Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-
9.2.1 (Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-
7.3 (Dimensional Requirements - Variation in thickness - Annexure E)	-
7.3 (Dimensional Requirements - Squareness - Annexure D)	-
7.3 (Dimensional Requirements - Edge Straightness - Annexure D)	-
7.3 (Dimensional Requirements - Thickness - Annexure E)	-
7.3 (Dimensional Requirements - Width - 8.1.4)	-
7.3 (Dimensional Requirements - Length - 8.1.4)	-
cl. 11.1 (marking - BIS certification marking)	-

-
Quantity Required: 2 Nos of Block Boards

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

16700 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6.1 (Dimensions (length))	-
Cl-6.2 (Thickness)	-
Cl-6.3 (Squareness)	-
Cl-8.3 (Edge Straightness)	-
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6 (Workmanship and finish)	-
Cl-9.3 (Moisture Content)	-
Cl-9.4.2 (Glue Adhesion in Dry State- Adhesion of Plies)	-
Cl-9.5.1.1 (Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-
Cl-9.5.1.2 (Water Resistance Test-Adhesion of plies)	-
Cl-9.6 (Tensile Strength-Along the grain)	-
Cl-9.7 (Mycological Test -Adhesion)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-9.8, Table-2 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-9.9, Table-3 (i) a ((Modulus of Elasticity: Across the Face Grain: Average) Wet Bending)	-
Cl-9.9, Table-3 (i) b ((Modulus of Elasticity: Across the Face Grain: Minimum Individual) Wet Bending)	-
Cl-9.9, Table-3 (ii) a ((Modulus of Rupture: Across the Face Grain: Average) Wet Bending)	-
Cl-9.9, Table-3 (ii) b ((Modulus of Rupture: Across the Face Grain: Minimum Individual) Wet Bending)	-
Cl-11.1 (Marking)	-
Cl-9.6 (Tensile Strength-Across the grain)	-
Cl-9.11 (Formaldehyde Content Test)	-
Cl-9.10 (Retention of Preservative)	-

-
Quantity Required: 2 Nos of Marine Plywood Sheets Except Steady-state Formaldehyde emission (optional test) as per Cl.9.12

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

Please see remarks View breakup
Total testing charge for BWP Grade - ₹ 7,450.00 Total testing charge for BWR Grade -₹ 7,100.00 Total testing charge for MR Grade -₹ 7,100.00

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.1 (Classification by appearance)	-
Cl-5.2, Table- 1 (i) (Blister)	-
Cl-5.2, Table- 1 (ii) (Checks)	-
Cl-5.2, Table- 1 (iii) (Discolouration)	-
Cl-7.2.1 (Thickness of veneers)	-
Cl-8.1 (Dimensions -length)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-5.2, Table- 1 (iv) (Dote)	-
Cl-5.2, Table- 1 (v) (Insect hole)	-
Cl-5.2, Table- 1 (vi) (Joints)	-
Cl-5.2, Table- 1 (vii) (Knots (dead))	-
Cl-5.2, Table- 1 (viii) (Pin knots (dead))	-
Cl-5.2, Table- 1 (ix) (Pin knots (live))	-
Cl-5.2, Table- 1 (x) (Knots (tight))	-
Cl-5.2, Table- 1 (xi) (Patches)	-
Cl-5.2, Table- 1 (xii) (Splits)	-
Cl-5.2, Table- 1 (xiii) (Swirl)	-
Cl-8.2 (Thickness of the plywood boards)	-
Cl.8, 8.3 & Annex C (Edge Squareness)	-
Cl.8, 8.3 & Annex C (Edge Straightness)	-
Cl-9 (WORKMANSHIP AND FINISH)	-
Cl-11.3.1, 11.3.1.1 (Water Resistance Test)	-
Cl-11.3.2 (Mycological Test)	-
Cl-11.4 (Moisture Content)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-
Cl-11.5, Table 4 (Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-
Cl-11.5, Table-4 (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-
Cl-11.5, Table-4, (Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-
Cl-13 (Marking)	-
Cl-11.6 (Formaldehyde Content Test)	-

-
Quantity Required: 2 Nos of Full Sheets Steady-state Formaldehyde emission (optional test) as per Cl.11.7

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-5.3, Table-1 (vi) (pH)	-
Cl-5.2.1 (Escherichia coli or thermotolerant bacteria)	-
Cl-5.2.2 (Coliform)	-
Cl-5.2.3 (Staphylococcus aureus)	-
Cl-5.2.4 (Sulphite Reducing Anaerobes)	-
Cl-5.2.5 (Pseudomonas Aeruginosa)	-
Cl-5.2.6 (Aerobic Microbial Count @ 37 deg C)	-
Cl-5.2.7 (Yeast and mould)	-
Cl-5.2.8 (Salmonella)	-
Cl-5.2.9 (Vibrio cholera)	-
Cl-5.2.3 (Faecal streptococci)	-
Cl-5.2.8 (shigella)	-
Cl-5.2.9 (V.parahaemolyticus)	-
5.2.6 (Aerobic Microbial Count @ 20 to 22 deg C)	-
Table 3, x) (Uranium)	-
5.4 i) (o,p DDT)	-
5.4 i) (p,p DDT)	-
5.4, i) (o,p DDE)	-
5.4 i) (p,p DDE)	-
5.4 i) (o,p DDD)	-
5.4 i) (p,p DDD)	-
5.4 i) (Gamma-HCH (Lindane))	-
5.4 i) (alpha-HCH)	-
5.4 i) (beta-HCH)	-
5.4 i) (Delta-HCH)	-
5.4 i) (alpha-Endosulfan)	-
5.4 i) (beta-Endosulfan)	-
5.4 i) (Endosulfan Sulphate)	-
5.4 i) (Monocrotophos)	-
5.4 i) (Ethion)	-
5.4 i) (Chlorpyrifos)	-
5.4 i) (Phorate)	-
5.4 i) (Phorate sulphoxide)	-
5.4 i) (Phorate sulphone)	-
5.4 i) (2,4-D)	-
5.4 i) (Butachlor)	-
5.4 i) (Isoproturon)	-
5.4 i) (Alachlor)	-
5.4 i) (Atrazine)	-
5.4 i) (Methyl Parathion)	-
5.4 i) (Methyl Paraoxon)	-
5.4, i) ("oxygen analogue of Malathion (Malaoxon)")	-
5.4 i) (Malathion)	-
5.4 i) (Aldrin)	-
5.4 i) (Dieldrin)	-
Cl-5.4 (ii) (Total pesticide residue)	-
Cl-5.3, Table-3 (ix) (Polynuclear aromatic hydrocarbons)	-
Cl-5.3, Table-3 (viii) (Polychlorinated biphenyl (PCB))	-
Cl-5.3, Table-3 (vii) (Nickel (as Ni))	-
Cl-5.3, Table-3 (vi) (Chromium (as Cr))	-
Cl-5.3, Table-3 (v) (Lead (as Pb))	-
Cl-5.3, Table-3 (iii) (Arsenic (as As))	-
Cl-5.3, Table-3 (ii) (Cadmium (as Cd))	-
Cl-5.3, Table-3 (i) (Mercury (as Hg))	-
Cl-5.3, Table-2 (xxv) (Bromates (as BrO3 ))	-
Cl-5.3, Table-2 (xxiv) (Borates (as B))	-
Cl-5.3, Table-2 (xxiii) (Antimony (as Sb))	-
Cl-5.3, Table-2 (xxii) (Sulphide)	-
Cl-5.3, Table-2 (xviii) (Residual free chlorine)	-
Cl-5.3, Table-2 (xvii) (Sodium (as Na))	-
Cl-5.3, Table-2 (xvi) (Magnesium (as Mg))	-
Cl-5.3, Table-2 (xv) (Calcium (as Ca))	-
Cl-5.3, Table-2 (xiv) (Alkalinity (as HCO3 ))	-
Cl-5.3, Table-2 (xiii) (Sulphate (as SO4 ))	-
Cl-5.3, Table-2 (xii) (Selenium (as Se))	-
Cl-5.3, Table-2 (xi) (Chloride (as Cl))	-
Cl-5.3, Table-2 (x) (Aluminium (as A1))	-
Cl-5.3, Table-2 (ix) (Silver (as Ag))	-
Cl-5.3, Table-2 (viii) (Zinc (as Zn))	-
Cl-5.3, Table-2 (vii) (Fluoride (as F))	-
Cl-5.3, Table-2 (vi) (Nitrite (as NO2 ))	-
Cl-5.3, Table-2 (v) (Nitrate (as NO3 ))	-
Cl-5.3, Table-2 (iv) (Manganese (as Mn))	-
Cl-5.3, Table-2 (iii) (Iron (as Fe))	-
Cl-5.3, Table-2 (ii) (Copper (as Cu))	-
Cl-5.3, Table-2 (i) (Barium (as Ba))	-
Cl-5.3, Table-1 (v) (Total dissolved solids, mg/l, Max)	-
Cl-5.3, Table-1 (iv) (Turbidity, nephelometric turbidity unit (NTU), Max)	-
Cl-5.3, Table-1 (iii) (Taste)	-
Cl-5.3, Table-1 (ii) (Odour)	-
Cl-5.3, Table-1 (i) (Colour, true colour units, Max)	-
5.3 (Appearance)	-
Cl-5.3, Table-2 (xx) (Mineral oil)	-

-
" 48x500ml; 24x1 ltr; 6x2ltr; 4x5 ltr; 2x20ltr Excluding ex.for radio active residues , CN, MBAS, Phenolic compounds

IS 17630 (2021)

Medical Textiles Bedsheet and Pillow Cover Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

IS 7933 (2022)

Specification for Flexible Polyurethane Foam for Domestic Mattresses First Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.8, Table 1, i) (Density,)	-
5.4 (Dimensions and Tolerances)	-

-
-

IS 3748 (2022)

Tool Steels - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
11.1 (Product diameter or thickness ≥ 15 mm)	-

-
-

IS 1536 (2023)

Centrifugally cast (spun) iron pressure pipes for water, gas and sewage ï¿½ Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
"Cl- 11.1,11.2, 11.4 Annex A" (Ring Test (for pipes cast in metal moulds))	-
Cl- 11.3,6.2,11.4 (Brinell Hardness Test)	-
"Cl- 13 to 14, Table 3 to 11" (Sizes, Dimensions & Tolerances)	-
Cl- 15.1 & 15.2 (Coating)	-

-
-

IS 15354 : Part 1 (2023)

Single-use medical examination gloves Part 1 Specification for gloves made from rubber latex or rubber solution Second Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-7.1, Table-2 (Size code)	-
Cl-7.1, Table-2 (Width corresponding to size code (dimension w, Figure 1))	-
Cl-4.3 (Finish)	-
Cl-7.1, Table-2 (Descriptive size)	-
Cl-7.1, Table-2 (Width corresponding to descriptive size (dimension w, Figure 1))	-
Cl-7.1, Table-2 (Minimum length (dimension l, Figure 1))	-
Cl-7.1, Table-2 (Minimum thickness (at locations shown in Figure 1))	-
Cl-7.1, Table-2 (Maximum thickness (at approximate centre of palm))	-
Cl-7.2 (Water tightness)	-
Cl-7.3.2 & 7.3.3, Table-3 (Minimum force at break before accelerated ageing, N)	-
Cl-7.3.2 & 7.3.3, Table-3 (Minimum elongation at break before accelerated ageing, %)	-
Cl-7.3.2 & 7.3.3, Table-3 (Minimum force at break after accelerated ageing, N)	-
Cl-7.3.2 & 7.3.3, Table-3 (Minimum elongation at break after accelerated ageing, %)	-
Cl-7.4 (Sterility)	-
Cl-9 (Marking)	-

-
Mech - 10 pairs, All tests Except Cl-7.3.2 & 7.3.3

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
(Cl.8 of IS 302-2-21:2011) (Protection Against Access to Live Parts)	-
(Cl.10 of IS 302-2-21: 2011) (Power Input & Current)	-

-
1 No Excluding Safety requirements as per IS 302 Part 2 are avaialble. Exluding tests of Construction as per Cl 22.10 to 22.103 and 22.113 , 22.114 as per IS 302-2-21, Standing Loss test (Cl 16),Hotwater output v) Reheating time vi) Mixing factor vii) Deviation ofdial calibration viii) Cyclic temperature variation, Endurance test.

IS 2556 : Part 6 (2021)

Vitreous China sanitary appliances - Specification: Part 6 Specific requirements of urinal and partition plates (fifth revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.1 (DIMENSIONS AND TOLERANCES)	-
Cl 7.7 ()	-
Cl 7.1.2 ()	-
Cl 8 ()	-
Clause 4 and Clause 9.5 of IS 2556 (Part 1) (Chemical resistance)	-

-
2 Nos. Advised wooden packing to avoid damage during transit.

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 (Marking and instructions)	-
8.1.1 (Protection against live parts in all positions)	-
8.1.2 (Protection against live parts in openings)	-
9 (Starting of motor operation test requirements and tests)	-
10.1 (Power input)	-
10.2 (Current input)	-
11.1 (General)	-
11.2 (General)	-
11.3 (Heating)	-
13.1 (General)	-
13.2 (Leakage current at operating temperature)	-
13.3 (Electric Strength at operating temperature)	-
14 (Transient Over Voltages)	-
8.1.3 (Protection against live parts in visible glowing heating elements)	-
8.1.4 (Protection against live parts against protective impedance)	-
15.0 (General)	-
15.1 (Ingress Protection test other than IPX0 (IP test))	-
15.2 (Spillage Test)	-
15.3 (Humidity Test)	-
16.0 (General)	-
16.2 (Leakage Current (after Clause 15))	-
16.3 (Electric Strength (after clause 15 and 16.2))	-
17 (Over Load Protection of Transformers and associated circuits)	-
19 (Abnormal Operation)	-
20 (Stability test)	-
21 (Mechanical Strength Test)	-
22 (Construction verification related test)	-
23 (General)	-
24 (Components)	-
25 (Supply connection and external flexible cords)	-
26 (Terminals for external conductors)	-
27 (Provision for earthing)	-
28 (Screw test and connections)	-
29 (clearance, creepage distances and solid insulation)	-
30.1 (Ball pressure test)	-
30.2 (Glow Wire Test)	-
30.2 (Needle Flame Test)	-
31 (Resistance to Rusting)	-

-
Excluding Expect Pin retention test (Clasue 22.3), Flexing Test (Clause 25.14)

IS 2785 (2022)

CHEESE - SPECIFICATION (Second Revision of IS 2785)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.1 (Appearance - IS 2785 :2022)	-
5.2.2 (Odour and Flavour-IS 2785 :2022)	-
5.2.3 (Texture and Consistency)	-
3 and 5.3 Table 1 (iii) (a) Processed Cheese (a) Moisture IS- 2785-2022 (Processed cheeze when sold in package othen than tin))	-
4 and 5.3 Table 1 (iii) (a) Processed Cheese (b) Moisture IS- 2785-2022 (Processed cheeze in chiplets, packed sliced))	-
3 and 5.3 Table 1 (iii) (a) Processed Cheese (Milk fat (On dry basis) IS 12758-2005)	-
3 and 5.3 Table 1 (iii) (b) Processed Cheese Spread (Moisture IS- 2785-2022)	-
3 and 5.3 Table 1 (iii) (b) Processed Cheese Spread (Milk fat (On dry basis) IS 12758-2005)	-
5.4 Table 2-i (Coliform-IS 5401(P-1):2012)	-
5.4 Table 2-ii (S.aureus-IS 5887(P-8/Sec-1):2002)	-
5.4 Table 2-iv (E.coli-IS 5887(P-1):1976)	-
5.4 Table 2-v (Salmonella spp.-IS 5887(P-3/Sec-1):2020)	-
5.4 Table 2-vi (L.monocytogenes-IS 14988(P-1):2020)	-
5.5 Table 3-i (Aerobic Colony count - IS 5402 (Part 2))	-
5.4 Table 2-iii (Yeast & Mould count-IS 5403:1999)	-
5.4 Table 2-ii (S.aureus-IS 5887(P-8/Sec-1):2002)	-
CL 5.5, Table 3 (iii) (Staphylococcus aureus (Coagulase positive))	-

-
500 g Excluding except lactose

IS 2080 (2021)

Specification for stabilized hydrogen peroxide First Revision

Check test charges remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description - IS 2080:2021)	-
4.2 (Strength - IS 2080:2021)	-
4.4/Table 1 (i) (Acidity (as H2SO4) - IS 2080:2021)	-
4.4/Table 1 (ii) (Residue on Evaporation - IS 2080:2021)	-
4.4/Table 1 (iv) (Iron (as Fe) - IS 2080:2021)	-
4.4/Table 1 (v) (Copper (as Cu) - IS 2080:2021)	-
4.4/Table 1 (vi) (Lead (as Pb) - IS 2080:2021)	-
4.4/Table 1 (vii) (Arsenic (as As2O3) - IS 2080:2021)	-
4.4/Table 1 (iii) (Residue on Ignition - IS 2080:2021)	-

-
-

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

8200.00 (complete testing charges) View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8 (Physical requirments)	-
8.2 (Physical requirments-Dimensions-Length)	-
8.2 (Physical requirments-Dimensions-Height)	-
8.2 (Physical requirments-Dimensions-Width)	-
8.4, 9.2 & 11.3 & Table 1 (Indivisual Compressive strength)	-
8.3 & 9.1 (Indivisual Moisture Content)	-
8.3 & 9.1 Table 1 (Indivisual Block Density)	-
8.3 (Physical requirments- Block density)	-
3.3 (Faces & Arises)	-
3.4 (Special Faces)	-

-
6 blocks with edges preserved Excluding Excluding Thermal Conductivity and Compression strength,aggregates

IS 10500 (2012)

Drinking water - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
TABLE 6 sl no 1 (All water intended for drinking: a) E. coli or thermotolerant coliform bacteri)	-
TABLE 6 sl no 2 (Treated water entering the distribution system: a) E. coli or thermotolerant coliform bacteria)	-
TABLE 6 sl no 3 (b) Total coliform bacteria)	-
TABLE 6 sl no 4 (Treated water in the distribution system: a) E. coli or thermotolerant coliform bacteria)	-
TABLE 6 sl no 5 (b) Total coliform bacteria)	-

-
Excluding Except Cyanide, Mineral Oil, MBAS, Phenolic Compounds, Biological requirements

IS 16232 (2014)

Iron fortified iodized salt (Double Fortified Salt) - Food grade - Specification

11800 View breakup
For complete test facility

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Description - Iron fortified iodized salt (Double fortified salt) shall be crushed crystalline solid; white or pale pink or light grey in colour, free from contamination with clay and other extraneous adulterants and impurities)	-
3.3 (material shall pass through 4.00 mm IS sieve)	-
3.4 - Table 1 - i (Moisture - Annex A of IS 7224)	-
3.4 - Table 1 - ii (Water insoluble matter, on dry basis - A-4 of IS 253 )	-
3.4 - Table 1 - iii (Chloride content (as NaCl), on dry basis - A-4 of IS 253)	-
3.4 - Table 1 - iv (Matter insoluble in dilute HCl, on dry basis - Annex G)	-
3.4 - Table 1 - v (Matter soluble in water other than sodium chloride, on dry basis - A-6 of IS 253)	-
3.4 - Table 1 - vi (Iron content (as Fe) - Annex A)	-
3.4 - Table 1 - vii- a (Iodine content, Manufacturer’s level - Annex B)	-
3.4 - Table 1 - vii- b (Iodine content, Distribution channel including retail level - Annex B)	-
3.4 - Table 1 - viii - b (pH of 5 percent aqueous solution : For other forms of iron fortification - Annex C)	-
3.4 - Table 1 - ix (Sulphate (as SO4) - A-8 of IS 253)	-
3.4 - Table 1 - x (Magnesium (as Mg), water soluble - A-7 of IS 253)	-
3.4 - Table 1 - xi - b (Phosphorous (as P2O5) - For other forms of iron fortification - Annex D)	-
3.4 - Table 1 - xii (Sodium hexa meta phosphate, on dry basis - Annex E)	-
3.4 - Table 1 - xi - a (Phosphorous (as P2O5) - For iron fortification through encapsulated ferrous fumarate - Annex D)	-

-
" 500 g " Excluding Except SHMP and Phosphorous Content Tets"

IS 2556 : Part 16 (2002)

Vitreous sanitary appliances (Vitreous China) - Specification: Part 16 specific requirements of wash down wall mounted water closets

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
"3 IS 2556(P1)" (GENERAL REQUIREMENTS)	-
"5 Table 1 & 2 " (DIMENSIONS AND TOLERANCES)	-
7 (FINISH)	-
6.1 (CONSTRUCTION)	-
8.1 ()	-
8.2 (Smudge Test)	-
8.3 (Holding Capacity Test)	-
8.4 (Single Ball Test)	-
9 (LOAD TEST)	-
4 (PATTERNS)	-
Clause 3 and Clause 9.5 of IS 2556 (Part 1) (Chemical resistance)	-

-
2 Nos. Advised wooden packing to avoid damage during transit.

IS 13258 (2014)

Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gas - Requirements for inspection and reconditioning of used lpg cylinders (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.4 (Tare Weight Verification)	-
14 (HYDROSTATIC TEST)	-
16 (PNEUMATIC TEST)	-

-
-

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

Rs.17350/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.3 (CLASSIFICATION OF PIPES)	-
6.1 (VISUAL APPEARANCE)	-

-
Excluding Standard superseded, will be removed from scope

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7.2.1 (Visual and Workmanship Requirement)	-
Cl 4.1.5 (Rubber rings- C)Rubber ring shall be of black colour:)	-
Cl 4.1.5 (Rubber rings- B) Change in hardness)	-
Cl 4.1.5 (Rubber rings- A)Shore hardness (Shore-A))	-
3.0 (DIMENSIONS OF PIPE)	-
3.0 (Reversion test)	-
8 (Marking)	-
Cl 4.1.5 (Rubber rings- C)Rubber ring shall be of black colour:)	-
Cl 4.1.5 (Rubber rings- B) Change in hardness)	-
Cl 4.1.5 (Rubber rings- A)Shore hardness (Shore-A))	-
3.0 (DIMENSIONS OF PIPE)	-
3.0 (Reversion test)	-
8 (Marking)	-

-
Excluding Standard superseded, will be removed from scope

IS 13592 (2013)

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.5 (Surface colour of the pipes shall be dark shade of grey)	-
Cl.7.1 (Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-
Cl.7.1 (Outside Diameter at any point (Take 8 reading reported minimum, maximum))	-
Cl.7.1 (Wall thickness "minimum,maximum" (Take 8 reading))	-
Cl.7.2 (Pipes shall be supplied in nominal lengths of 2, 3, 4 or 6 metres either plain or with socket for solvent cementing/grooved socket. Tolerances on specified length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent cementing/grooved socket shall be as given in Fig. 1.)	-
Cl.7.3.2 (Dimensions of sockets for solvent cementing and grooved sockets of pipes shall be as given in Tables 3 and 4 respectively, read with Fig. 2 and 3.)	-
Cl.8.1 (The internal and external surface of the pipes shall be smooth and clean, and free from grooving and other defects. The end shall be clearly cut and shall be square with the axis of the pipe. The end may be chamfered on the plain side.)	-
Cl.8.2 (When tested by the method described in IS 12235 (Part 5), a length of pipe sample of 200 ± 20 mm shall not alter in length by more than 5 percent. In the case of socket ended pipes, this test shall be carried out on the plain portion of pipe taken at least 100 mm away from the root of the socket.)	-
Cl.8.4 (When determined in accordance with IS 12235 (Part 2), the vicat softening temperature of the specimen shall not be less than 79°C.)	-
Cl.11. (Jointing of solvent cementing joints is to be carried out using solvent conforming to IS 14182. Apply a pressure of 0.05 MPa for a period of 15 min and there should be no leakage at any joint.)	-

-
6 No. × 1 m including 3 Nos Socket ended pipes with Washer Excluding Effect of Sunlight , Resistance to dichloromethane and Tensile test

IS 12395 (1988)

Specification for disposable trash bags of plastics

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
-

IS 7129 (2021)

POTASSIUM CARBONATE ANHYDROUS SPECIFICATION (Second Revision)

Please see remarks View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Description)	-
4.3 - Table 1 - Sl No - i (Total Alkalinity (as K2CO3) - Annex A 2)	-
4.3 - Table 1 - Sl No - ii (Potassium bicarbonate (as KHCO3) - Annex A 3)	-
4.3 - Table 1 - Sl No - ii (Free alkali (as KOH)- Annex A 3)	-
4.3 - Table 1 - Sl No - iii (Sulphates (as K2SO4) - Annex A 4)	-
4.3 - Table 1 - Sl No - iv (Chlorides (as KCl) - Annex A 5)	-
4.3 - Table 1 - Sl No - v (Matter insoluble in water - Annex A 6)	-
4.3 - Table 1 - Sl No - vi (Iron (as Fe) - Annex A 7 & A 12)	-
4.3 - Table 1 - Sl No - vii (Heavy metals (as Pb - Annex A 8 & A 12)	-
4.3 - Table 1 - Sl No - viii (Loss on heating at 150oC - Annex A 9)	-
4.3 - Table 1 - Sl No - ix (Sodium (as Na) - Annex A 10 & A 12)	-

-
" 250 g Excluding Except Calcium and Magnesium and heavy metals

IS 2556 : Part 5 (1994)

Vitreous sanitary appliances (Vitreous China) - Specification: Part 5 specific requirements of laboratory sinks

Rs 675/- +charges as per part I View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (General requirements-Thickness IS 2556 (Part 1))	-
3 (General requirements-PERFORMANCE REQUIllEMENTS-WARPAGE IS 2556 (Part 1))	-

-
2 NOS

IS 4985 (2021)

UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
10.1 (Colour)	-
10.1 (Surface Finish)	-
7.2.1.1 Table3 (Angle of taper (Note-1))	-
5 (CLASSIFICATION OF PIPES)	-
Cl-7.1 (Mean out side Diameter (For less than or equal to 40 mm- Average of 8 , For higher diameters up to 110 mm average of 6))	-
7.1.1.1 (DIMENSIONS-PIPE-Mean O.D. (Minimum))	-
7.1.1.1 (DIMENSIONS-PIPE-Mean O.D. (Mamimum))	-
7.1.1.1 (DIMENSIONS-PIPE-Mean O.D. Variation)	-
7.1.1.2 (DIMENSIONS-PIPE-O.D. at any Point (Minimum))	-
7.1.1.2 (DIMENSIONS-PIPE-O.D. at any Point (Maximum))	-
7.1.1.2 (DIMENSIONS-PIPE-Ovality (Maximum))	-
7.1.2.1 (DIMENSIONS-PIPE-Thickness(Minimum))	-
7.1.2.1 (DIMENSIONS-PIPE-Thickness(Maximum))	-
7.1.2.1 (DIMENSIONS-PIPE-Average Thickness)	-
Cl- 7.2 (Socket length (Take 4 reading & minimum will be reported))	-
7.2.1.1-Table 3 (DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length)	-
7.2.1.1-Table 3 (DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum))	-
7.2.1.2-Table 4 (DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter)	-
8 (SEALING RINGS)	-
9.1 (PIPE ENDS)	-
10.1 (PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-
10.1.1 (PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-
10.2 (PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-
10.4 (PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-
10.5 (PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-
10.6 (PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-
11.1-Table 6 (MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test))	-
11.1-Table 7 (MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-
11.1.1 (MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes)	-
11.2 (Resistance to External Blows at 0°C)	-
7.1.4 (Length)	-
10.7 (Sulphated Ash Content)	-

-
1mx10nos Excluding Hydrostatic test facility available up to DN 110mm only. Excl long term Hyd.Test and Effect on water

IS 252 (2013)

Caustic soda - Specification (Fourth Revision)

Rs 5100/- (for Lye & Solid) View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 (Form and Description)	-
Cl. 3.3 and 3.4(Table 1, S. no i) (Sodium carbonate (as Na2CO3), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no ii) (Sodium hydroxide (as NaOH), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no iii) (Chlorides (as Cl– ), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no iv) (Sulphates (as SO4), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no v) (Silicates (as SiO2), percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no vi) (Iron (as Fe))	-
Cl. 3.3 and 3.4(Table 1, S. no vii) (Copper)	-
Cl. 3.3 and 3.4(Table 1, S. no viii) (Manganese)	-
Cl. 3.3 and 3.4(Table 1, S. no ix) (Chlorates and per-chlorates)	-
Cl. 3.3 and 3.4(Table 1, S. no x) (Matter insoluble water, percent by mass)	-
Cl. 3.3 and 3.4(Table 1, S. no xi) (Total mercury)	-
Cl. 3.3 and 3.4(Table 1, S. no xii) (Sodium hydroxide)	-

-
-

IS 1486 (1978)

Specification for copper oxychloride, technical

Rs 1050/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

-
500 g"

IS 4654 (2019)

Paraffin Wax — Specification ( Third Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 Table 1 (Ash, all types)	-
4.2 Table 1 (Saponification value, all types)	-

-
Excluding Except Except Melting point, Acidity, Oil content, Colour, Acid discolouration test, UV Absorbance test

First
Prev
1
2
3
4
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Southern Regional Laboratory (SRL)

IV CROSS ROAD, CIT CAMPUS, TARAMANI, CHENNAI-600113, TAMILNADU, CHENNAI, Chennai, Tamil Nadu, 600113

- srol@bis.gov.in

Scope List

No Record Found

No Record Found

No Record Found