BIS - LIMS (Laboratory Information Management System)

Planet Electro Labs Private Limited (407)

WZ-407/B-1, BASAI DARAPUR, NEAR RAMESH NAGAR METRO STATION,NEW DELHI, NEW DELHI, West, Delhi, 110015

9971932901 PLANETLABSIND@gmail.com

Scope List

Reset

20 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS/IEC 60730 : Part 2 : Sec 9 (2011)

Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements Section 9 Temperature Sensing Controls

95000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(By inspection)	-	500	-
5.1(By inspection)	-	500	-
5.2(By inspection)	-	500	-
6.1(By inspection)	-	500	-
6.2(By inspection)	-	500	-
6.3(By inspection)	-	500	-
6.4(By inspection)	-	500	-
6.4.3(By inspection)	-	500	-
6.5(By inspection)	-	500	-
6.5.1(IEC 60529 and by inspection)	-	500	-
6.5.2(IEC 60529 and by inspection)	-	500	-
6.5.3(Annexure N and by inspection)	-	500	-
6.6(By inspection)	-	500	-
6.7.1(By inspection)	-	500	-
6.7.2(By inspection)	-	500	-
6.8(By inspection)	-	500	-
6.8.2(By inspection)	-	500	-
6.9(Annexure H and by inspection)	-	500	-
6.1(By inspection)	-	500	-
6.11(By inspection)	-	500	-
6.12(By inspection)	-	500	-
6.13(By inspection)	-	500	-
6.14(By inspection)	-	500	-
6.15(Annexure J and by inspection)	-	500	-
6.16(By inspection)	-	500	-
6.17(Annexure H)	-	500	-
6.18(Annexure H)	-	500	-
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	500	-
9(By inspection)	-	500	-
9.1.1(By inspection)	-	500	-
9.1.2(By inspection)	-	500	-
9.1.3(By inspection)	-	500	-
9.2(By inspection)	-	500	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	500	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	500	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	500	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	500	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	500	-
9.4(by inspection and by plating)	-	500	-
9.4.1(by inspection)	-	500	-
9.4.2(by inspection)	-	500	-
9.5.1(by inspection)	-	500	-
9.5.2(by inspection)	-	500	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	500	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	500	-
10.1.2(By inspection )	-	500	-
10.1.3(By inspection )	-	500	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	500	-
10.1.5(By measurement)	-	500	-
10.1.5.1(by inspection, by measurement, by torque test)	-	500	-
10.1.6(by inspection after cl 10.1.5)	-	500	-
10.1.7(by inspection)	-	500	-
10.1.7.1(by inspection)	-	500	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	500	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	500	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	500	-
10.1.11(By inspection)	-	500	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	500	-
10.1.13(By inspection and after the test of cl 17)	-	500	-
10.1.14(By inspection)	-	500	-
10.1.15(Figure 11 or 12)	-	500	-
10.2(By inspection)	-	500	-
10.2.1(Table 10.2.1)	-	500	-
10.2.2(By inspection)	-	500	-
10.2.3(By inspection)	-	500	-
10.2.4.1(Figure 14 or 15)	-	500	-
10.2.4.2(During the test of cl 14)	-	500	-
10.2.4.3(As per table 10.2.4.3)	-	500	-
10.2.4.4(As per Figure 16)	-	500	-
11.1(By inspection)	-	500	-
11.1.1(By inspection)	-	500	-
11.1.2(by inspection and by analysis of the material)	-	500	-
11.1.3(by inspection)	-	500	-
11.2(by inspection and by test)	-	500	-
11.2.2(by inspection, by measurement and/or by manual test)	-	500	-
11.2.3(by inspection, by measurement and/or by manual test)	-	500	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	500	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	500	-
11.2.5(As per annexure H, cl 11.2.5)	-	500	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	500	-
11.3.2(by inspection and by the tests of clauses 13)	-	500	-
11.3.3(by inspection)	-	500	-
11.3.4(by inspection)	-	500	-
11.3.5(by inspection)	-	500	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	500	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	500	-
11.3.8(by inspection)	-	500	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	500	-
11.4.1 (by inspection)	-	500	-
11.4.2(by inspection)	-	500	-
11.4.3(by the tests of clauses 15 to 17)	-	500	-
11.4.4 to 11.4.16(As per relevent type)	-	500	-
11.5(by inspection)	-	500	-
11.6.1(by inspection and by manual test)	-	500	-
11.6.2(by inspection and by manual test)	-	500	-
11.6.3.1(By inspection)	-	500	-
11.6.3.2(By inspection)	-	500	-
11.6.3.3(By inspection)	-	500	-
11.6.3.4(By inspection)	-	500	-
11.6.3.5(By inspection)	-	500	-
11.6.3.6(By inspection)	-	500	-
11.6.3.7(By inspection)	-	500	-
11.7.1(By Flexing test as per fig 9)	-	500	-
11.7.1.2.2(By Flexing test as per fig 9)	-	500	-
11.7.1.2.3(By Flexing test as per fig 9)	-	500	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	500	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	500	-
11.7.2.11 to 11.7.2.15(By measurement)	-	500	-
11.8(By inspection)	-	500	-
11.8.1(By inspection)	-	500	-
11.8.2(By inspection and as per table 11.8.2)	-	500	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	500	-
11.9.1(By inspection)	-	500	-
11.9.1.1(by inspection and manual test)	-	500	-
11.9.1.2(by inspection and manual test)	-	500	-
11.9.1.3(by inspection and manual test)	-	500	-
11.9.1.4(by inspection and manual test)	-	500	-
11.10.1(by inspection)	-	500	-
11.10.2(by inspection)	-	500	-
11.10.3(by inspection and by test of socket-outlet system)	-	500	-
11.11(Requirements during mounting, maintenance and servicing)	-	500	-
11.11.1(By inspection)	-	500	-
11.11.1.1(By inspection)	-	500	-
11.11.1.2(By inspection)	-	500	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	500	-
11.11.1.5.4(By inspection)	-	500	-
11.11.1.5.6(by pull test)	-	500	-
11.11.2(By inspection)	-	500	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	500	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	500	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	500	-
11.11.4(By inspection)	-	500	-
11.11.5(By inspection and by manual test)	-	500	-
11.11.6(By inspection)	-	500	-
11.11.7(By inspection)	-	500	-
11.12(As per H, cl 11.12)	-	500	-
12.1(As per IEC 60529)	-	500	-
12.1.6.2(Torque test)	-	500	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	500	-
13.1(as per table 13.1)	-	500	-
13.2(As per table 13.2)	-	500	-
12.3(as per cl 12.3.1 to 12.3.7)	-	500	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	500	-
14.1(As per table 14.1)	-	500	-
14.3(As per table 14.1)	-	500	-
15(as per cl 15.1 to 15.4)	-	500	-
15.5(as per cl 15.5 to 15.6)	-	500	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	500	-
15.7(as per annexure J, cl 15.7)	-	500	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	500	-
16.2.4(test of cl 15 repeated )	-	500	-
16.2.4(42 of table 7.2)	-	500	-
17.1(by the tests of 17.1.3 as indicated in 17.16)	-	500	-
17.6(as per cl 17.6.1 and 17.6.2)	-	500	-
17.7(as per cl 17.7.1 to 17.7.7)	-	500	-
17.8(as per cl 17.8.1 to 17.8.4.1)	-	500	-
17.9(as per cl 17.9.1 to 17.9.4)	-	500	-
17.1(as per cl 17.10.1 to 17.10.4)	-	500	-
17.11(as per cl 17.11.1 to 17.11.4)	-	500	-
17.12(as per cl 17.12.1 to 17.12.5)	-	500	-
17.13(as per cl 17.13.1 to 17.13.4)	-	500	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	500	-
H.17.14(as per cl H 17.4.16)	-	500	-
17.15.2(as per cl 17.15.2 and 17.15.2.3)	-	500	-
J 17.18.5(as per cl J 17.8.5)	-	500	-
J 17.18.5(as per cl J 17.8.6)	-	500	-
J 17.17.2(as per table 13.1)	-	500	-
J 17.17(As per table 13.2)	-	500	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	500	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	500	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	500	-
18.1.6(By inspection)	-	500	-
18.1.6.1(By inspection)	-	500	-
18.1.6.2(By inspection)	-	500	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	500	-
18.2(Impact tester)	-	500	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	500	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	500	-
18.7(Pull test as per table 18.7)	-	500	-
18.8(as per cl 18.8.2 and 18.8.3)	-	500	-
18.9(axial pull of 15N/30N)	-	500	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	500	-
28(Guidance on the use of Electronic Disconnection)	-	500	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	500	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	500	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	500	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	500	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	500	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	500	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	500	-
19.2.1(By inspection)	-	0	-
19.2.2(By inspection)	-	0	-
19.2.3(By inspection)	-	0	-
19.2.4(By inspection)	-	0	-
19.2.4.1(By inspection)	-	0	-
19.2.5(By inspection)	-	0	-
19.2.5.1(By inspection)	-	0	-
19.2.6(By inspection)	-	0	-
20.1(as per table 20.2)	-	0	-
20.2.1(as per table 20.3)	-	0	-
20.2.2(as per table 20.4)	-	0	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	0	-
21.2.2 to 21.2.6(as per annexure G)	-	0	-
21.2.7(As per cl G.4)	-	0	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	0	-
23(As per cl 23.1 to 23.1.2)	-	0	-
24.1(as per IEC 60742)	-	0	-
24.1(as per IEC 60384-14)	-	0	-
24.1(as per IEC 60127 or IEC 60269)	-	0	-
25(as per annexure H)	-	0	-
26(as per annexure H)	-	0	-
27.1(as per annexure H)	-	0	-
27.2(as per cl 27.2.1 and 27.2.2)	-	0	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	0	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	0	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	0	-
11.1.102(As per IEC 60216-1:2001)	-	0	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	0	-
11.4.101(as per cl 11.4.101)	-	0	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	0	-
11.4.107(As per annexure DD)	-	0	-
11.6.3.101(As per table 7, item 117)	-	0	-
11.101(As per annexure BB)	-	0	-
12.101(None)	-	0	-
12.101.2(15 K+Tmax for 16 hr)	-	0	-
12.101.5(as per 12.103 to 12.105)	-	0	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	0	-
14.101.1( as per cl 14.102 and 14.102.1)	-	0	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	0	-
15.5.3.109( voltage specified in Table 13.2)	-	0	-
17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C)	-	0	-
17.16.107( 250 thermal cycles.)	-	0	-
17.16.108( 7 h at a temperature of –20 C (or lower, if declared))	-	0	-
17.101.1(as per cl 17.101.1 to 17.105)	-	0	-
18.101(as per cl 18.101.2 and 101.3)	-	0	-
18.102(Hydrualic test)	-	0	-
23.101(as per cl 23.101.1 and 23.101.2)	-	0	-
5(Rating)	-	0	-
6(Classification)	-	0	-
7(Information)	-	0	-
8(Protection against Electric Shock)	-	0	-
9(Provision for Protective Earthing)	-	0	-
10(Terminals and terminations)	-	0	-
11(Constructional Requirements)	-	0	-
12(Moisture and Dust Resistance)	-	0	-
13(Electric Strength and Insulation Resistance)	-	0	-
14(Heating)	-	0	-
15(Manufacturing Deviation and Drift)	-	0	-
16(Environmental Stress)	-	0	-
17(Endurance)	-	0	-
18(Mechanical Strength)	-	0	-
19(Threaded Parts and Connections)	-	0	-
20(Creepage Distances, Clearancces and distance through solid insulation)	-	0	-
21(Fire Hazard Testing)	-	0	-
22(Resistance to Corrosion)	-	0	-
23(EMC for Emission test)	-	0	-
23(EMC for Emission test)	-	0	-
23(EMC for Emission test)	-	0	-
24(Components)	-	0	-
25(Normal Operation)	-	0	-
26(EMC for Immunity test)	-	0	-
26(EMC for Immunity test)	-	0	-
26(EMC for Immunity test)	-	0	-
26(EMC for Immunity test)	-	0	-
26(EMC for Immunity test)	-	0	-
26(EMC for Immunity test)	-	0	-
26(EMC for Immunity test)	-	0	-
26(EMC for Immunity test)	-	0	-
27(Abnormal Operation)	-	0	-
5(By inspection)	-	-	-
5.1(By inspection)	-	-	-
5.2(By inspection)	-	-	-
6.1(By inspection)	-	-	-
6.2(By inspection)	-	-	-
6.3(By inspection)	-	-	-
6.4(By inspection)	-	-	-
6.4.3(By inspection)	-	-	-
6.5(By inspection)	-	-	-
6.5.1(IEC 60529 and by inspection)	-	-	-
6.5.2(IEC 60529 and by inspection)	-	-	-
6.5.3(Annexure N and by inspection)	-	-	-
6.6(By inspection)	-	-	-
6.7.1(By inspection)	-	-	-
6.7.2(By inspection)	-	-	-
6.8(By inspection)	-	-	-
6.8.2(By inspection)	-	-	-
6.9(Annexure H and by inspection)	-	-	-
6.1(By inspection)	-	-	-
6.11(By inspection)	-	-	-
6.12(By inspection)	-	-	-
6.13(By inspection)	-	-	-
6.14(By inspection)	-	-	-
6.15(Annexure J and by inspection)	-	-	-
6.16(By inspection)	-	-	-
6.17(Annexure H)	-	-	-
6.18(Annexure H)	-	-	-
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	-	-
9(By inspection)	-	-	-
9.1.1(By inspection)	-	-	-
9.1.2(By inspection)	-	-	-
9.1.3(By inspection)	-	-	-
9.2(By inspection)	-	-	-
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	-	-
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	-	-
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	-	-
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	-	-
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	-	-
9.4(by inspection and by plating)	-	-	-
9.4.1(by inspection)	-	-	-
9.4.2(by inspection)	-	-	-
9.5.1(by inspection)	-	-	-
9.5.2(by inspection)	-	-	-
10.1.1(By inspection and as per IEC 60988-2-2)	-	-	-
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	-	-
10.1.2(By inspection )	-	-	-
10.1.3(By inspection )	-	-	-
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	-	-
10.1.5(By measurement)	-	-	-
10.1.5.1(by inspection, by measurement, by torque test)	-	-	-
10.1.6(by inspection after cl 10.1.5)	-	-	-
10.1.7(by inspection)	-	-	-
10.1.7.1(by inspection)	-	-	-
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	-	-
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	-	-
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	-	-
10.1.11(By inspection)	-	-	-
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	-	-
10.1.13(By inspection and after the test of cl 17)	-	-	-
10.1.14(By inspection)	-	-	-
10.1.15(Figure 11 or 12)	-	-	-
10.2(By inspection)	-	-	-
10.2.1(Table 10.2.1)	-	-	-
10.2.2(By inspection)	-	-	-
10.2.3(By inspection)	-	-	-
10.2.4.1(Figure 14 or 15)	-	-	-
10.2.4.2(During the test of cl 14)	-	-	-
10.2.4.3(As per table 10.2.4.3)	-	-	-
10.2.4.4(As per Figure 16)	-	-	-
11.1(By inspection)	-	-	-
11.1.1(By inspection)	-	-	-
11.1.2(by inspection and by analysis of the material)	-	-	-
11.1.3(by inspection)	-	-	-
11.2(by inspection and by test)	-	-	-
11.2.2(by inspection, by measurement and/or by manual test)	-	-	-
11.2.3(by inspection, by measurement and/or by manual test)	-	-	-
11.2.3.2(by inspection, by measurement and/or by manual test)	-	-	-
11.2.4(as per lEC 60227 or IEC 60245.)	-	-	-
11.2.5(As per annexure H, cl 11.2.5)	-	-	-
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	-	-
11.3.2(by inspection and by the tests of clauses 13)	-	-	-
11.3.3(by inspection)	-	-	-
11.3.4(by inspection)	-	-	-
11.3.5(by inspection)	-	-	-
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	-	-
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	-	-
11.3.8(by inspection)	-	-	-
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	-	-
11.4.1 (by inspection)	-	-	-
11.4.2(by inspection)	-	-	-
11.4.3(by the tests of clauses 15 to 17)	-	-	-
11.4.4 to 11.4.16(As per relevent type)	-	-	-
11.5(by inspection)	-	-	-
11.6.1(by inspection and by manual test)	-	-	-
11.6.2(by inspection and by manual test)	-	-	-
11.6.3.1(By inspection)	-	-	-
11.6.3.2(By inspection)	-	-	-
11.6.3.3(By inspection)	-	-	-
11.6.3.4(By inspection)	-	-	-
11.6.3.5(By inspection)	-	-	-
11.6.3.6(By inspection)	-	-	-
11.6.3.7(By inspection)	-	-	-
11.7.1(By Flexing test as per fig 9)	-	-	-
11.7.1.2.2(By Flexing test as per fig 9)	-	-	-
11.7.1.2.3(By Flexing test as per fig 9)	-	-	-
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	-	-
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	-	-
11.7.2.11 to 11.7.2.15(By measurement)	-	-	-
11.8(By inspection)	-	-	-
11.8.1(By inspection)	-	-	-
11.8.2(By inspection and as per table 11.8.2)	-	-	-
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	-	-
11.9.1(By inspection)	-	-	-
11.9.1.1(by inspection and manual test)	-	-	-
11.9.1.2(by inspection and manual test)	-	-	-
11.9.1.3(by inspection and manual test)	-	-	-
11.9.1.4(by inspection and manual test)	-	-	-
11.10.1(by inspection)	-	-	-
11.10.2(by inspection)	-	-	-
11.10.3(by inspection and by test of socket-outlet system)	-	-	-
11.11(Requirements during mounting, maintenance and servicing)	-	-	-
11.11.1(By inspection)	-	-	-
11.11.1.1(By inspection)	-	-	-
11.11.1.2(By inspection)	-	-	-
11.11.1.5(As per cl 11.11.1.5.1 to 11.11.1.5.3)	-	-	-
11.11.1.5.4(By inspection)	-	-	-
11.11.1.5.6(by pull test)	-	-	-
11.11.2(By inspection)	-	-	-
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	-	-
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	-	-
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	-	-
11.11.4(By inspection)	-	-	-
11.11.5(By inspection and by manual test)	-	-	-
11.11.6(By inspection)	-	-	-
11.11.7(By inspection)	-	-	-
11.12(As per H, cl 11.12)	-	-	-
12.1(As per IEC 60529)	-	-	-
12.1.6.2(Torque test)	-	-	-
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	-	-
13.1(as per table 13.1)	-	-	-
13.2(As per table 13.2)	-	-	-
12.3(as per cl 12.3.1 to 12.3.7)	-	-	-
13.3.1 to 13.3.4(as per clause 13.3.4)	-	-	-
14.1(As per table 14.1)	-	-	-
14.3(As per table 14.1)	-	-	-
15(as per cl 15.1 to 15.4)	-	-	-
15.5(as per cl 15.5 to 15.6)	-	-	-
15.6.4(42 of table 7.2, and as per annexure AA)	-	-	-
15.7(as per annexure J, cl 15.7)	-	-	-
16.2(as per cl 16.2.1 to 16.2.3 )	-	-	-
16.2.4(test of cl 15 repeated )	-	-	-
16.2.4(42 of table 7.2)	-	-	-
17.1(by the tests of 17.1.3 as indicated in 17.16)	-	-	-
17.6(as per cl 17.6.1 and 17.6.2)	-	-	-
17.7(as per cl 17.7.1 to 17.7.7)	-	-	-
17.8(as per cl 17.8.1 to 17.8.4.1)	-	-	-
17.9(as per cl 17.9.1 to 17.9.4)	-	-	-
17.1(as per cl 17.10.1 to 17.10.4)	-	-	-
17.11(as per cl 17.11.1 to 17.11.4)	-	-	-
17.12(as per cl 17.12.1 to 17.12.5)	-	-	-
17.13(as per cl 17.13.1 to 17.13.4)	-	-	-
H 17.1.4.2(as per cl H 17.1.4.2)	-	-	-
H.17.14(as per cl H 17.4.16)	-	-	-
17.15.2(as per cl 17.15.2 and 17.15.2.3)	-	-	-
J 17.18.5(as per cl J 17.8.5)	-	-	-
J 17.18.5(as per cl J 17.8.6)	-	-	-
J 17.17.2(as per table 13.1)	-	-	-
J 17.17(As per table 13.2)	-	-	-
J. 17. 18.2(as per cl J. 17. 18.2)	-	-	-
J. 17. 18.3(as per cl J. 17. 18.3)	-	-	-
J. 17. 18.4(as per cl J. 17. 18.4)	-	-	-
18.1.6(By inspection)	-	-	-
18.1.6.1(By inspection)	-	-	-
18.1.6.2(By inspection)	-	-	-
18.1.6.3(Pull test as per cl 18.1.6.3)	-	-	-
18.2(Impact tester)	-	-	-
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	-	-
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	-	-
18.7(Pull test as per table 18.7)	-	-	-
18.8(as per cl 18.8.2 and 18.8.3)	-	-	-
18.9(axial pull of 15N/30N)	-	-	-
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
28(Guidance on the use of Electronic Disconnection)	-	-	-
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	-	-
19.2.1(By inspection)	-	-	-
19.2.2(By inspection)	-	-	-
19.2.3(By inspection)	-	-	-
19.2.4(By inspection)	-	-	-
19.2.4.1(By inspection)	-	-	-
19.2.5(By inspection)	-	-	-
19.2.5.1(By inspection)	-	-	-
19.2.6(By inspection)	-	-	-
20.1(as per table 20.2)	-	-	-
20.2.1(as per table 20.3)	-	-	-
20.2.2(as per table 20.4)	-	-	-
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	-	-
21.2.2 to 21.2.6(as per annexure G)	-	-	-
21.2.7(As per cl G.4)	-	-	-
22.1.1(As per cl 21.1.3 to 21.1.6)	-	-	-
23(As per cl 23.1 to 23.1.2)	-	-	-
24.1(as per IEC 60742)	-	-	-
24.1(as per IEC 60384-14)	-	-	-
24.1(as per IEC 60127 or IEC 60269)	-	-	-
25(as per annexure H)	-	-	-
26(as per annexure H)	-	-	-
27.1(as per annexure H)	-	-	-
27.2(as per cl 27.2.1 and 27.2.2)	-	-	-
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	-	-
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	-	-
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	-	-
11.1.102(As per IEC 60216-1:2001)	-	-	-
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	-	-
11.4.101(as per cl 11.4.101)	-	-	-
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	-	-
11.4.107(As per annexure DD)	-	-	-
11.6.3.101(As per table 7, item 117)	-	-	-
11.101(As per annexure BB)	-	-	-
12.101(None)	-	-	-
12.101.2(15 K+Tmax for 16 hr)	-	-	-
12.101.5(as per 12.103 to 12.105)	-	-	-
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	-	-
14.101.1( as per cl 14.102 and 14.102.1)	-	-	-
15.5.3.101 to 15.5.3.105(According to type of control)	-	-	-
15.5.3.109( voltage specified in Table 13.2)	-	-	-
17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C)	-	-	-
17.16.107( 250 thermal cycles.)	-	-	-
17.16.108( 7 h at a temperature of –20 C (or lower, if declared))	-	-	-
17.101.1(as per cl 17.101.1 to 17.105)	-	-	-
18.101(as per cl 18.101.2 and 101.3)	-	-	-
18.102(Hydrualic test)	-	-	-
23.101(as per cl 23.101.1 and 23.101.2)	-	-	-
5(Rating)	-	-	-
6(Classification)	-	-	-
7(Information)	-	-	-
8(Protection against Electric Shock)	-	-	-
9(Provision for Protective Earthing)	-	-	-
10(Terminals and terminations)	-	-	-
11(Constructional Requirements)	-	-	-
12(Moisture and Dust Resistance)	-	-	-
13(Electric Strength and Insulation Resistance)	-	-	-
14(Heating)	-	-	-
15(Manufacturing Deviation and Drift)	-	-	-
16(Environmental Stress)	-	-	-
17(Endurance)	-	-	-
18(Mechanical Strength)	-	-	-
19(Threaded Parts and Connections)	-	-	-
20(Creepage Distances, Clearancces and distance through solid insulation)	-	-	-
21(Fire Hazard Testing)	-	-	-
22(Resistance to Corrosion)	-	-	-
23(EMC for Emission test)	-	-	-
26(EMC for Immunity test)	-	-	-
25(Normal Operation)	-	-	-
27(Abnormal Operation)	-	-	-

05 Nov, 2026

-
Included w.e.f 29.09.2025 Exclusion: Cl 23 (EMC for Emission test), Cl 24 (Components), Cl 26 (EMC for Immunity test)

IS/IEC 61730 : PART 2 (2023)

Photovoltaic (PV) Module - Safety Qualification Part 2 Requirements for Testing (Second Revision)

1600000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2(Visual inspection MST 01)	-	10000	-
10.3(Performance at STC MST 02)	-	50000	-
10.4(Maximum power determination MST 03)	-	50000	-
10.5(Insulation thickness test MST 04)	-	40000	-
10.6(Durability of markings MST 05)	-	20000	-
10.7(Sharp edge test MST 06)	-	20000	-
10.8(Bypass diode functionality test MST 07)	-	35000	-
10.9(Accessibility test MST 11)	-	50000	-
10.1(Cut susceptibility test MST 12)	-	65000	-
10.11(Continuity test of equipotential bonding MST 13)	-	55000	-
10.12(Impulse voltage test MST 14)	-	34000	-
10.13(Insulation test MST 16)	-	20000	-
10.14(Wet leakage current test MST 17)	-	50000	-
10.16(Hot-spot endurance test MST 22)	-	120000	-
10.17(Fire test MST 23)	-	220000	-
10.18(Ignitability test MST 24)	-	100000	-
10.19(Bypass diode thermal test MST 25)	-	80000	-
10.20(Reverse current overload test MST 26)	-	40000	-
10.21(Module breakage test MST 32)	-	30000	-
10.22(Screw connections test MST 33)	-	20000	-
10.23(Static mechanical load test MST 34)	-	120000	-
10.24(Peel test MST 35)	-	80000	-
10.25(Lap shear strength test MST 36)	-	40000	-
10.26(Materials creep test MST 37)	-	40000	-
10.27(Robustness of terminations test MST 42)	-	40000	-
10.28(Thermal cycling test MST 51)	-	200000	-
10.29(Humidity freeze test MST 52)	-	120000	-
10.30(Damp heat test MST 53)	-	210000	-
10.31(UV test MST 54)	-	150000	-
10.32(Cold conditioning test MST 55)	-	110000	-
10.33(Dry heat conditioning test MST 56)	-	120000	-
10.34(Evaluation of insulation coordination MST 57)	-	40000	-
10.2(Visual inspection MST 01)	-	40000	-
10.3(Performance at STC MST 02)	-	40000	-
10.4(Maximum power determination MST 03)	-	40000	-
10.5(Insulation thickness test MST 04)	-	40000	-
10.6(Durability of markings MST 05)	-	40000	-
10.7(Sharp edge test MST 06)	-	40000	-
10.8(Bypass diode functionality test MST 07)	-	50000	-
10.9(Accessibility test MST 11)	-	65000	-
10.1(Cut susceptibility test MST 12)	-	65000	-
10.11(Continuity test of equipotential bonding MST 13)	-	75000	-
10.12(Impulse voltage test MST 14)	-	45000	-
10.13(Insulation test MST 16)	-	10000	-
10.14(Wet leakage current test MST 17)	-	120000	-
10.16(Hot-spot endurance test MST 22)	-	150000	-
10.17(Fire test MST 23)	-	150000	-
10.18(Ignitability test MST 24)	-	45000	-
10.19(Bypass diode thermal test MST 25)	-	40000	-
10.20(Reverse current overload test MST 26)	-	35000	-
10.21(Module breakage test MST 32)	-	50000	-
10.22(Screw connections test MST 33)	-	33000	-
10.23(Static mechanical load test MST 34)	-	35000	-
10.24(Peel test MST 35)	-	35000	-
10.25(Lap shear strength test MST 36)	-	35000	-
10.26(Materials creep test MST 37)	-	35000	-
10.27(Robustness of terminations test MST 42)	-	35000	-
10.28(Thermal cycling test MST 51)	-	75000	-
10.29(Humidity freeze test MST 52)	-	200000	-
10.30(Damp heat test MST 53)	-	190000	-
10.31(UV test MST 54)	-	200000	-
10.32(Cold conditioning test MST 55)	-	150000	-
10.33(Dry heat conditioning test MST 56)	-	120000	-
10.34(Evaluation of insulation coordination MST 57)	-	35000	-
10.2(Visual inspection MST 01)	-	-	-
10.3(Performance at STC MST 02)	-	-	-
10.4(Maximum power determination MST 03)	-	-	-
10.5(Insulation thickness test MST 04)	-	-	-
10.6(Durability of markings MST 05)	-	-	-
10.7(Sharp edge test MST 06)	-	-	-
10.8(Bypass diode functionality test MST 07)	-	-	-
10.9(Accessibility test MST 11)	-	-	-
10.1(Cut susceptibility test MST 12)	-	-	-
10.11(Continuity test of equipotential bonding MST 13)	-	-	-
10.12(Impulse voltage test MST 14)	-	-	-
10.13(Insulation test MST 16)	-	-	-
10.14(Wet leakage current test MST 17)	-	-	-
10.16(Hot-spot endurance test MST 22)	-	-	-
10.17(Fire test MST 23)	-	-	-
10.18(Ignitability test MST 24)	-	-	-
10.19(Bypass diode thermal test MST 25)	-	-	-
10.20(Reverse current overload test MST 26)	-	-	-
10.21(Module breakage test MST 32)	-	-	-
10.22(Screw connections test MST 33)	-	-	-
10.23(Static mechanical load test MST 34)	-	-	-
10.24(Peel test MST 35)	-	-	-
10.25(Lap shear strength test MST 36)	-	-	-
10.26(Materials creep test MST 37)	-	-	-
10.27(Robustness of terminations test MST 42)	-	-	-
10.28(Thermal cycling test MST 51)	-	-	-
10.29(Humidity freeze test MST 52)	-	-	-
10.30(Damp heat test MST 53)	-	-	-
10.31(UV test MST 54)	-	-	-
10.32(Cold conditioning test MST 55)	-	-	-
10.33(Dry heat conditioning test MST 56)	-	-	-
10.34(Evaluation of insulation coordination MST 57)	-	-	-

05 Nov, 2026

-
Included w.e.f 16.09.2025

IS/IEC 61730 : PART 1 (2023)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction (Second Revision)

400000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Classification, applications and intended use)	-	10000	-
6.2(Marking and documentation)	-	10000	-
6.3.2(Internal wiring)	-	50000	-
6.3.3(External wiring and cables)	-	40000	-
6.3.4(Module overcurrent protection rating)	-	40000	-
6.3.5(Connectors)	-	40000	-
6.3.6(Junction boxes)	-	40000	-
6.3.7(Frontsheets and backsheets)	-	40000	-
6.3.8(Insulation barriers)	-	40000	-
6.3.9(Electrical connections)	-	40000	-
6.3.10(Encapsulants)	-	40000	-
6.3.11(Bypass diodes)	-	50000	-
6.4(Mechanical and electromechanical connections)	-	40000	-
6.4.2(Screw connections)	-	40000	-
6.4.3(Rivets)	-	30000	-
6.4.4(Thread-cutting screws)	-	30000	-
6.4.5(Form/press/tight fit)	-	40000	-
6.4.6(Connections by adhesives)	-	40000	-
6.4.7(Other connections)	-	40000	-
6.5.2(Polymeric materials)	-	30000	-
6.5.2.3(Flammability)	-	60000	-
6.5.3.2(Current-carrying parts)	-	40000	-
6.5.4(Adhesives)	-	40000	-
6.6.2(Protection against accessibility to hazardous live parts)	-	25000	-
6.6.3(Insulation coordination)	-	15000	-
6.6.3.2.1(Pollution degree)	-	20000	-
6.6.3.3(Creepage distance)	-	5000	-
6.6.3.4(Clearance)	-	5000	-
6.6.4(Distance through functional and relied upon insulation)	-	10000	-
6.6.4.3(Cemented joints)	-	10000	-
6.6.4.4(Distance through functional insulation)	-	10000	-
5(Classification, applications and intended use)	-	10000	-
6.2(Marking and documentation)	-	10000	-
6.3.2(Internal wiring)	-	20000	-
6.3.3(External wiring and cables)	-	20000	-
6.3.4(Module overcurrent protection rating)	-	25000	-
6.3.5(Connectors)	-	20000	-
6.3.6(Junction boxes)	-	40000	-
6.3.7(Frontsheets and backsheets)	-	40000	-
6.3.8(Insulation barriers)	-	30000	-
6.3.9(Electrical connections)	-	30000	-
6.3.10(Encapsulants)	-	30000	-
6.3.11(Bypass diodes)	-	30000	-
6.4(Mechanical and electromechanical connections)	-	50000	-
6.4.2(Screw connections)	-	30000	-
6.4.3(Rivets)	-	10000	-
6.4.4(Thread-cutting screws)	-	20000	-
6.4.5(Form/press/tight fit)	-	10000	-
6.4.6(Connections by adhesives)	-	20000	-
6.4.7(Other connections)	-	30000	-
6.5.2(Polymeric materials)	-	30000	-
6.5.2.3(Flammability)	-	30000	-
6.5.3.2(Current-carrying parts)	-	40000	-
6.5.4(Adhesives)	-	20000	-
6.6.2(Protection against accessibility to hazardous live parts)	-	40000	-
6.6.3(Insulation coordination)	-	15000	-
6.6.3.2.1(Pollution degree)	-	10000	-
6.6.3.3(Creepage distance)	-	5000	-
6.6.3.4(Clearance)	-	5000	-
6.6.4(Distance through functional and relied upon insulation)	-	15000	-
6.6.4.3(Cemented joints)	-	15000	-
6.6.4.4(Distance through functional insulation)	-	5000	-
5(Classification, applications and intended use)	-	10000	-
6.2(Marking and documentation)	-	10000	-
6.3.2(Internal wiring)	-	10000	-
6.3.3(External wiring and cables)	-	10000	-
6.3.4(Module overcurrent protection rating)	-	10000	-
6.3.5(Connectors)	-	10000	-
6.3.6(Junction boxes)	-	10000	-
6.3.7(Frontsheets and backsheets)	-	15000	-
6.5.4(Adhesives)	-	10000	-
6.3.9(Electrical connections)	-	10000	-
6.3.10(Encapsulants)	-	10000	-
6.3.11(Bypass diodes)	-	10000	-
6.4(Mechanical and electromechanical connections)	-	10000	-
6.4.2(Screw connections)	-	10000	-
6.4.3(Rivets)	-	10000	-
6.4.4(Thread-cutting screws)	-	10000	-
6.4.5(Form/press/tight fit)	-	10000	-
6.4.6(Connections by adhesives)	-	10000	-
6.4.7(Other connections)	-	10000	-
6.5.2(Polymeric materials)	-	10000	-
6.5.2.3(Flammability)	-	10000	-
6.5.3.2(Current-carrying parts)	-	10000	-
6.6.2(Protection against accessibility to hazardous live parts)	-	10000	-
6.6.3(Insulation coordination)	-	10000	-
6.6.3.2.1(Pollution degree)	-	10000	-
6.6.3.3(Creepage distance)	-	10000	-
6.6.3.4(Clearance)	-	10000	-
6.6.4(Distance through functional and relied upon insulation)	-	10000	-
6.6.4.3(Cemented joints)	-	10000	-
6.6.4.4(Distance through functional insulation)	-	10000	-
6.3.8(Insulation barriers)	-	10000	-
5(Classification, applications and intended use)	-	-	-
6.2(Marking and documentation)	-	-	-
6.3.2(Internal wiring)	-	-	-
6.3.3(External wiring and cables)	-	-	-
6.3.4(Module overcurrent protection rating)	-	-	-
6.3.5(Connectors)	-	-	-
6.3.6(Junction boxes)	-	-	-
6.3.7(Frontsheets and backsheets)	-	-	-
6.5.4(Adhesives)	-	-	-
6.3.9(Electrical connections)	-	-	-
6.3.10(Encapsulants)	-	-	-
6.3.11(Bypass diodes)	-	-	-
6.4(Mechanical and electromechanical connections)	-	-	-
6.4.2(Screw connections)	-	-	-
6.4.3(Rivets)	-	-	-
6.4.4(Thread-cutting screws)	-	-	-
6.4.5(Form/press/tight fit)	-	-	-
6.4.6(Connections by adhesives)	-	-	-
6.4.7(Other connections)	-	-	-
6.5.2(Polymeric materials)	-	-	-
6.5.2.3(Flammability)	-	-	-
6.5.3.2(Current-carrying parts)	-	-	-
6.6.2(Protection against accessibility to hazardous live parts)	-	-	-
6.6.3(Insulation coordination)	-	-	-
6.6.3.2.1(Pollution degree)	-	-	-
6.6.3.3(Creepage distance)	-	-	-
6.6.3.4(Clearance)	-	-	-
6.6.4(Distance through functional and relied upon insulation)	-	-	-
6.6.4.3(Cemented joints)	-	-	-
6.6.4.4(Distance through functional insulation)	-	-	-
6.3.8(Insulation barriers)	-	-	-

05 Nov, 2026

-
Included w.e.f 16.09.2025

IS/IEC 61730 : PART 2 (2016)

Photovoltaic (PV) module safety qualification: Part 2 requirements for testing (First Revision)

840000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 10.2(Visual inspection MST 01)	-	5000	-
Clause 10.3(Performance at STC MST 02)	-	20000	-
Clause 10.4(Maximum powerdetermination MST 03)	-	80000	-
Clause 10.5(Insulation thickness test MST 04)	-	10000	-
Clause 10.6(Durability of markings MST 05)	-	5000	-
Clause 10.7(Sharp edge test MST 06)	-	10000	-
Clause 10.8(Bypass diode functionality test MST 07)	-	50000	-
Clause 10.9(Accessibility test MST 11)	-	30000	-
Clause 10.10(Cut susceptibility test MST 12)	-	30000	-
Clause 10.11(Continuity test of equipotential bonding MST 13)	-	25000	-
Clause 10.12(Impulse voltage test MST 14)	-	20000	-
Clause 10.13(Insulation test MST 16)	-	10000	-
Clause 10.14(Wet leakage current test MST 17)	-	75000	-
Clause 10.15(Temperature test MST 21)	-	75000	-
Clause 10.16(Hot-spot endurance test MST 22)	-	75000	-
Clause 10.17(Fire test MST 23)	-	110000	-
Clause 10.18(Ignitability test MST 24)	-	50000	-
Clause 10.19(Bypass diode thermal test MST 25)	-	60000	-
Clause 10.20(Reverse current overload test MST 26)	-	30000	-
Clause 10.21(Module breakage test MST 32)	-	20000	-
Clause 10.22(Screw connections test MST 33)	-	5000	-
Clause 10.23(Static mechanical load test MST 34)	-	40000	-
Clause 10.24(Peel test MST 35)	-	15000	-
Clause 10.25(Lap shear strength test MST 36)	-	15000	-
Clause 10.26(Materials creep test MST 37)	-	10000	-
Clause 10.27(Robustness of terminations test MST 42)	-	15000	-
Clause 10.28(Thermal cycling test MST 51)	-	120000	-
Clause 10.29(Humidity freeze test MST 52)	-	120000	-
Clause 10.30(Damp heat test MST 53)	-	120000	-
Clause 10.31(UV test MST 54)	-	75000	-
Clause 10.32(Cold conditioning MST 55)	-	35000	-
Clause 10.33(Dry heat conditioning MST 56)	-	35000	-
Clause 10.2(Visual inspection MST 01)	-	5000	-
Clause 10.3(Performance at STC MST 02)	-	25000	-
Clause 10.4(Maximum powerdetermination MST 03)	-	40000	-
Clause 10.5(Insulation thickness test MST 04)	-	5000	-
Clause 10.6(Durability of markings MST 05)	-	5000	-
Clause 10.7(Sharp edge test MST 06)	-	10000	-
Clause 10.8(Bypass diode functionality test MST 07)	-	60000	-
Clause 10.9(Accessibility test MST 11)	-	20000	-
Clause 10.10(Cut susceptibility test MST 12)	-	25000	-
Clause 10.11(Continuity test of equipotential bonding MST 13)	-	20000	-
Clause 10.12(Impulse voltage test MST 14)	-	15000	-
Clause 10.13(Insulation test MST 16)	-	5000	-
Clause 10.14(Wet leakage current test MST 17)	-	45000	-
Clause 10.15(Temperature test MST 21)	-	35000	-
Clause 10.16(Hot-spot endurance test MST 22)	-	85000	-
Clause 10.17(Fire test MST 23)	-	75000	-
Clause 10.18(Ignitability test MST 24)	-	25000	-
Clause 10.19(Bypass diode thermal test MST 25)	-	60000	-
Clause 10.20(Reverse current overload test MST 26)	-	20000	-
Clause 10.21(Module breakage test MST 32)	-	20000	-
Clause 10.22(Screw connections test MST 33)	-	15000	-
Clause 10.23(Static mechanical load test MST 34)	-	40000	-
Clause 10.24(Peel test MST 35)	-	15000	-
Clause 10.25(Lap shear strength test MST 36)	-	15000	-
Clause 10.26(Materials creep test MST 37)	-	15000	-
Clause 10.27(Robustness of terminations test MST 42)	-	25000	-
Clause 10.28(Thermal cycling test MST 51)	-	120000	-
Clause 10.29(Humidity freeze test MST 52)	-	100000	-
Clause 10.30(Damp heat test MST 53)	-	75000	-
Clause 10.31(UV test MST 54)	-	60000	-
Clause 10.32(Cold conditioning MST 55)	-	15000	-
Clause 10.33(Dry heat conditioning MST 56)	-	25000	-

05 Nov, 2026

-
Included w.e.f 13.05.2025 Exclusion: Cl. 5.3.3 (External wiring & cables)

IS/IEC 61730 : PART 1 (2016)

Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction ( First Revision )

490000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.0(Application Classes)	-	5000	-
4.0(Construction Requirements)	-	10000	-
5.0(Polymeric Materials)	-	5000	-
6.0(Internal Wiring and Current Carrying Parts)	-	2000	-
7.0(Connections)	-	20000	-
8.0(Bonding and Grounding)	-	20000	-
9.0(Creepage and clearance distances)	-	5000	-
10.0(Field Wiring Compartments with covers)	-	10000	-
11.0(Marking)	-	5000	-
12.0(Requirements of Supplied documents)	-	5000	-
5.6.4 IS/IEC 61730-1(Distance through Insulation)	-	5000	-
5.6.3 IS/IEC 61730-1(Insulation Coordination)	-	5000	-
5.6.2 IS/IEC 61730-1(Protection Agianst accessibility to hazardeous live parts)	-	8000	-
5.6, 5.6.1 IS/IEC 61730-1(Protection Agianst Electric Shock)	-	10000	-
5.5.4 IS/IEC 61730-1(Adhesives)	-	20000	-
5.5.3.2 IS/IEC 61730-1(Current Carrying Parts)	-	10000	-
5.5.3, 5.5.3.1 IS/IEC 61730-1(Metallic materials)	-	10000	-
5.5.2.4 IS/IEC 61730-1(Polymeric Meterial used for Mechanical functions)	-	15000	-
5.5.2.3.5 IS/IEC 61730-1(Polymeric Insulating Parts supporting live Parts)	-	15000	-
5.5.2.3.4 IS/IEC 61730-1(Polymeric Insulating materials used as external Parts)	-	15000	-
5.5.2.3.3 IS/IEC 61730-1(Endurance to thermal stress-RTE (RTI) or TI)	-	15000	-
5.5.2.3.2 IS/IEC 61730-1(Endurance to Electrical Stress)	-	25000	-
5.5.2 IS/IEC 61730-1(Polymeric Materials)	-	10000	-
5.5, 5.5.1 IS/IEC 61730-1(Materials)	-	10000	-
5.4.7 IS/IEC 61730-1(Other Connections)	-	10000	-
5.4.6 IS/IEC 61730-1(Connections by adhesives)	-	10000	-
5.4.5 IS/IEC 61730-1(Form/Press/Tight/Fit)	-	5000	-
5.4.4 IS/IEC 61730-1(Thread Cutting Screws)	-	10000	-
5.4.3 IS/IEC 61730-1(Rivets)	-	10000	-
5.4.2 IS/IEC 61730-1(Screw Connctions)	-	10000	-
5.4, 5.4.1 IS/IEC 61730-1(Mechanical and Electromechanical connections)	-	10000	-
5.3.10 IS/IEC 61730-1(Bypass Diodes)	-	10000	-
5.3.9 IS/IEC 61730-1(Encapsulants)	-	10000	-
5.3.8 IS/IEC 61730-1(Electrical Connections)	-	10000	-
5.3.7 IS/IEC 61730-1(Insulation Barrier)	-	10000	-
5.3.6 IS/IEC 61730-1(Front sheet and back Sheet)	-	10000	-
5.3.5 IS/IEC 61730-1(Junction Box for PV modules)	-	10000	-
5.3.4 IS/IEC 61730-1(Connectors)	-	10000	-
5.3.3 IS/IEC 61730-1(External Wirings and cables)	-	10000	-
5.3.2 IS/IEC 61730-1(Internal Wiring)	-	10000	-
5.3, 5.3.1 IS/IEC 61730-1(Electrical Components and Insualtion)	-	10000	-
5.2 IS/IEC 61730-1(Marking and Documentation)	-	5000	-
5, 5.1 IS/IEC 61730-1(Requirements for design and Construction)	-	20000	-
4 IS/IEC 61730-1(Classification, Application and Inteded Use)	-	10000	-
5.6.4 IS/IEC 61730-1(Distance through Insulation)	-	5000	-
5.6.3 IS/IEC 61730-1(Insulation Coordination)	-	10000	-
5.6.2 IS/IEC 61730-1(Protection Agianst accessibility to hazardeous live parts)	-	20000	-
5.6, 5.6.1 IS/IEC 61730-1(Protection Agianst Electric Shock)	-	10000	-
5.5.4 IS/IEC 61730-1(Adhesives)	-	20000	-
5.5.3.2 IS/IEC 61730-1(Current Carrying Parts)	-	10000	-
5.5.3, 5.5.3.1 IS/IEC 61730-1(Metallic materials)	-	10000	-
5.5.2.4 IS/IEC 61730-1(Polymeric Meterial used for Mechanical functions)	-	10000	-
5.5.2.3.5 IS/IEC 61730-1(Polymeric Insulating Parts supporting live Parts)	-	10000	-
5.5.2.3.4 IS/IEC 61730-1(Polymeric Insulating materials used as external Parts)	-	10000	-
5.5.2.3.3 IS/IEC 61730-1(Endurance to thermal stress-RTE (RTI) or TI)	-	35000	-
5.5.2.3.2 IS/IEC 61730-1(Endurance to Electrical Stress)	-	20000	-
5.5.2 IS/IEC 61730-1(Polymeric Materials)	-	20000	-
5.5, 5.5.1 IS/IEC 61730-1(Materials)	-	10000	-
5.4.7 IS/IEC 61730-1(Other Connections)	-	10000	-
5.4.6 IS/IEC 61730-1(Connections by adhesives)	-	10000	-
5.4.5 IS/IEC 61730-1(Form/Press/Tight/Fit)	-	10000	-
5.4.4 IS/IEC 61730-1(Thread Cutting Screws)	-	10000	-
5.4.3 IS/IEC 61730-1(Rivets)	-	10000	-
5.4.2 IS/IEC 61730-1(Screw Connctions)	-	10000	-
5.4, 5.4.1 IS/IEC 61730-1(Mechanical and Electromechanical connections)	-	10000	-
5.3.10 IS/IEC 61730-1(Bypass Diodes)	-	10000	-
5.3.9 IS/IEC 61730-1(Encapsulants)	-	10000	-
5.3.8 IS/IEC 61730-1(Electrical Connections)	-	10000	-
5.3.7 IS/IEC 61730-1(Insulation Barrier)	-	10000	-
5.3.6 IS/IEC 61730-1(Front sheet and back Sheet)	-	10000	-
5.3.5 IS/IEC 61730-1(Junction Box for PV modules)	-	10000	-
5.3.4 IS/IEC 61730-1(Connectors)	-	10000	-
5.3.3 IS/IEC 61730-1(External Wirings and cables)	-	10000	-
5.3.2 IS/IEC 61730-1(Internal Wiring)	-	10000	-
5.3, 5.3.1 IS/IEC 61730-1(Electrical Components and Insualtion)	-	10000	-
5.2 IS/IEC 61730-1(Marking and Documentation)	-	10000	-
5, 5.1 IS/IEC 61730-1(Requirements for design and Construction)	-	10000	-
4 IS/IEC 61730-1(Classification, Application and Inteded Use)	-	10000	-
4(Classification, applications and intended use)	-	10000	-
5.2(Marking and documentation)	-	5000	-
5.3(Electrical components and insulation)	-	10000	-
5.3.2(Internal wiring)	-	10000	-
5.3.4(Connectors)	-	10000	-
5.4(Mechanical and electromechanical connections)	-	10000	-
5.5(Materials)	-	10000	-
5.5.2, 5.3.7(Polymeric materials)	-	10000	-
5.6(Protection against electric shock)	-	10000	-
5.6.3.4(Clearances and creepage distances)	-	5000	-

05 Nov, 2026

-
Included w.e.f 13.05.2025

IS 14286 : Part 1 : Sec 2 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-2: Special requirements for testing of thin-film Cadmium Telluride CdTe based photovoltaic PV modules Third Revision

2000000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	15000	-
Cl-11.1(Visual inspection)	-	15000	-
Cl-11.2(Maximum power determination)	-	100000	-
Cl-11.3(Insulation tes)	-	20000	-
Cl-11.4(Measurement of temperature coefficients)	-	100000	-
Cl-11.5(Measurement of nominal module operating temperature)	-	100000	-
Cl-11.6(Performance at STC and NMOT)	-	50000	-
Cl-11.7(Performance at low irradiance)	-	100000	-
Cl-11.8(Outdoor exposure test)	-	100000	-
Cl-11.9(Hot-spot endurance test)	-	100000	-
Cl-11.10(UV preconditioning test)	-	50000	-
Cl-11.11(Thermal cycling test)	-	120000	-
Cl-11.12(Humidity-freeze test)	-	120000	-
Cl-11.13(Damp heat test)	-	120000	-
Cl-11.14(Robustness of terminations test)	-	20000	-
Cl-11.15(Wet leakage current test)	-	50000	-
Cl-11.16(Static mechanical load test)	-	50000	-
Cl-11.17(Hail test)	-	75000	-
Cl-11.18(Bypass diode testing)	-	50000	-
Cl-11.19(Stabilization)	-	50000	-
5(Marking and documentation)	-	5000	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	20000	-
11.21(Potential induced degradation test (MQT 21))	-	350000	-
11.22(Bending test (MQT 22))	-	20000	-

05 Nov, 2026

-
Included w.e.f 13.05.2025

IS 14286 : Part 1 : Sec 1 (2023)

Terrestrial photovoltaic PV modules Design qualification and type approval Part 1-1: Special requirements for testing of crystalline silicon photovoltaic PV modules Third Revision

2000000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-8(Major visual defects)	-	15000	-
Cl-11.1(Visual inspection)	-	15000	-
Cl-11.2(Maximum power determination)	-	20000	-
Cl-11.3(Insulation test)	-	20000	-
Cl-11.4(Measurement of temperature coefficients)	-	100000	-
Cl-11.5(Measurement of nominal module operating temperature)	-	50000	-
Cl-11.6(Performance at STC)	-	50000	-
Cl-11.7(Performance at low irradiance)	-	100000	-
Cl-11.8(Outdoor exposure test)	-	100000	-
Cl-11.9(Hot-spot endurance test)	-	100000	-
Cl-11.10(UV preconditioning test)	-	80000	-
Cl-11.11(Thermal cycling test)	-	120000	-
Cl-11.12(Humidity-freeze test)	-	120000	-
Cl-11.13(Damp heat test)	-	120000	-
Cl-11.14(Robustness of terminations test)	-	20000	-
Cl-11.15(Wet leakage current tes)	-	50000	-
Cl-11.16(Static mechanical load test)	-	50000	-
Cl-11.17(Hail test)	-	75000	-
Cl-11.18(Bypass diode thermal test)	-	20000	-
Cl-11.19(Stabilization)	-	100000	-
5(Marking and documentation)	-	5000	-
11.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	20000	-
11.21(Potential induced degradation test (MQT 21))	-	400000	-
11.22(Bending test (MQT 22))	-	40000	-

05 Nov, 2026

-
Included w.e.f 13.05.2025

IS 14286 : Part 1 (2023)

Terrestrial Photovoltaic PV Modules Design Qualification and Type Approval Part 1: Test Requirements (Third Revision)

2000000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Visual inspection (MQT 01))	-	15000	-
4.2(Maximum power determination (MQT 02))	-	100000	-
4.3(Insulation test (MQT 03))	-	25000	-
4.4(Measurement of temperature coefficients (MQT 04))	-	70000	-
4.6(Performance at STC (MQT 06.1))	-	100000	-
4.7(Performance at low irradiance (MQT 07))	-	70000	-
4.8(Outdoor exposure test (MQT 08))	-	80000	-
4.9(Hot-spot endurance test (MQT 09))	-	70000	-
4.10(UV preconditioning test (MQT 10))	-	100000	-
4.11(Thermal cycling test (MQT 11))	-	200000	-
4.12(2 Humidity-freeze test (MQT 12))	-	120000	-
4.13(Damp heat test (MQT 13))	-	125000	-
4.14(Robustness of terminations (MQT 14))	-	25000	-
4.15(5 Wet leakage current test (MQT 15))	-	40000	-
4.16(Static mechanical load test (MQT 16))	-	60000	-
4.17(Hail test (MQT 17))	-	75000	-
4.18(Bypass diode testing (MQT 18))	-	50000	-
4.19(Stabilization (MQT 19))	-	100000	-
4.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	40000	-
4.21(Potential induced degradation test (MQT 21))	-	435000	-
4.22(Bending test (MQT 22))	-	50000	-
4.1(Visual inspection (MQT 01))	-	5000	-
4.2(Maximum power determination (MQT 02))	-	10000	-
4.3(Insulation test (MQT 03))	-	10000	-
4.4(Measurement of temperature coefficients (MQT 04))	-	75000	-
4.6(Performance at STC (MQT 06.1))	-	75000	-
4.7(Performance at low irradiance (MQT 07))	-	100000	-
4.8(Outdoor exposure test (MQT 08))	-	100000	-
4.9(Hot-spot endurance test (MQT 09))	-	100000	-
4.10(UV preconditioning test (MQT 10))	-	100000	-
4.11(Thermal cycling test (MQT 11))	-	125000	-
4.12(2 Humidity-freeze test (MQT 12))	-	125000	-
4.13(Damp heat test (MQT 13))	-	125500	-
4.14(Robustness of terminations (MQT 14))	-	10000	-
4.15(5 Wet leakage current test (MQT 15))	-	40000	-
4.16(Static mechanical load test (MQT 16))	-	40000	-
4.17(Hail test (MQT 17))	-	75000	-
4.18(Bypass diode testing (MQT 18))	-	50000	-
4.19(Stabilization (MQT 19))	-	80000	-
4.20(Cyclic (dynamic) mechanical load test (MQT 20))	-	40000	-
4.21(Potential induced degradation test (MQT 21))	-	400000	-
4.22(Bending test (MQT 22))	-	30000	-
4.5(Placeholder section, formerly NMOT)	-	5000	-

05 Nov, 2026

-
Included w.e.f 13.05.2025

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

All electrical appliance intended for household, commercial or similar application with rated voltage not exceeding 250V single phase alternating current or 415V three phase alternating current.

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	1000	-
27(Provision for earthing)	-	1000	-
26(Terminals for external conductors)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
24(Components)	-	1000	-
23(General)	-	500	-
22(Construction verification related test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
20(Stability test)	-	1000	-
19(Abnormal Operation)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
16.0(General)	-	500	-
15.0(General)	-	500	-
14(Transient Over Voltages)	-	1000	-
13.1(General)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
11.1(General)	-	500	-
11.2(General)	-	500	-
11.3(Heating)	-	500	-
10.1(Power input)	-	500	-
10.2(Current input)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
30.1(Ball pressure test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.2(Needle Flame Test)	-	500	-
31(Resistance to Rusting)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	500	-
18(Endurance Test requirements and tests)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.2(Spillage Test)	-	500	-
15.3(Humidity Test)	-	2000	-
16.1(General)	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
19.11.4.7(Harmonics)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.5(Immunity to conducted discharges)	-	500	-
11.8(Temperature rise)	-	500	-
11.7(Duration corresponding)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.6(Combined appliances)	-	500	-
11.4(Heating appliances)	-	500	-
4(General Requirement)	-	500	-
5(General conditions for tests)	-	500	-
6(Classifications)	-	500	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	500	-
9(Starting of motor operation test requirements and tests)	-	1000	-
4(General requirement)	-	500	-
7(Marking and instructions)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
27(Provision for earthing)	-	500	-
26(Terminals for external conductors)	-	500	-
25(Supply connection and external flexible cords)	-	500	-
24(Components)	-	500	-
23(General)	-	500	-
22(Construction verification related test)	-	500	-
21(Mechanical Strength Test)	-	500	-
20(Stability test)	-	500	-
19(Abnormal Operation)	-	500	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
16.0(General)	-	500	-
15.0(General)	-	500	-
14(Transient Over Voltages)	-	500	-
13.1(General)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
11.1(General)	-	500	-
11.2(General)	-	500	-
11.3(Heating)	-	500	-
10.1(Power input)	-	500	-
10.2(Current input)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
30.1(Ball pressure test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.2(Needle Flame Test)	-	500	-
31(Resistance to Rusting)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
18(Endurance Test requirements and tests)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.2(Spillage Test)	-	500	-
15.3(Humidity Test)	-	1000	-
16.1(General)	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
19.11.4.7(Harmonics)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.5(Immunity to conducted discharges)	-	500	-
11.8(Temperature rise)	-	500	-
11.7(Duration corresponding)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.6(Combined appliances)	-	500	-
11.4(Heating appliances)	-	500	-
4(General Requirement)	-	500	-
5(General conditions for tests)	-	500	-
6(Classifications)	-	500	-
18(Endurance)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
16(Leakage current and electric strength)	-	500	-
9(Starting of motor operation test requirements and tests)	-	500	-
4(General requirement)	-	500	-
7(Marking and instructions)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
27(Provision for earthing)	-	500	-
26(Terminals for external conductors)	-	500	-
25(Supply connection and external flexible cords)	-	500	-
24(Components)	-	500	-
23(General)	-	500	-
22(Construction verification related test)	-	500	-
21(Mechanical Strength Test)	-	500	-
20(Stability test)	-	500	-
19(Abnormal Operation)	-	500	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
16.0(General)	-	500	-
15.0(General)	-	500	-
14(Transient Over Voltages)	-	500	-
13.1(General)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
11.1(General)	-	500	-
11.2(General)	-	500	-
11.3(Heating)	-	500	-
10.1(Power input)	-	500	-
10.2(Current input)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
30.1(Ball pressure test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.2(Needle Flame Test)	-	500	-
31(Resistance to Rusting)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
18(Endurance Test requirements and tests)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.2(Spillage Test)	-	500	-
15.3(Humidity Test)	-	500	-
16.1(General)	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
19.11.4.7(Harmonics)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.5(Immunity to conducted discharges)	-	500	-
11.8(Temperature rise)	-	500	-
11.7(Duration corresponding)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.6(Combined appliances)	-	500	-
11.4(Heating appliances)	-	500	-
4(General Requirement)	-	500	-
5(General conditions for tests)	-	500	-
6(Classifications)	-	500	-
18(Endurance)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
16(Leakage current and electric strength)	-	500	-
9(Starting of motor operation test requirements and tests)	-	500	-
4(General requirement)	-	500	-
7(Marking and instructions)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
27(Provision for earthing)	-	500	-
26(Terminals for external conductors)	-	500	-
25(Supply connection and external flexible cords)	-	500	-
24(Components)	-	500	-
23(General)	-	500	-
22(Construction verification related test)	-	500	-
21(Mechanical Strength Test)	-	500	-
20(Stability test)	-	500	-
19(Abnormal Operation)	-	500	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
16.0(General)	-	500	-
15.0(General)	-	500	-
14(Transient Over Voltages)	-	500	-
13.1(General)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
11.1(General)	-	500	-
11.2(General)	-	500	-
11.3(Heating)	-	500	-
10.1(Power input)	-	500	-
10.2(Current input)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
30.1(Ball pressure test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.2(Needle Flame Test)	-	500	-
31(Resistance to Rusting)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
18(Endurance Test requirements and tests)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.2(Spillage Test)	-	500	-
15.3(Humidity Test)	-	500	-
16.1(General)	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
19.11.4.7(Harmonics)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.5(Immunity to conducted discharges)	-	500	-
11.8(Temperature rise)	-	500	-
11.7(Duration corresponding)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.6(Combined appliances)	-	500	-
11.4(Heating appliances)	-	500	-
4(General Requirement)	-	500	-
5(General conditions for tests)	-	500	-
6(Classifications)	-	500	-
18(Endurance)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16(Leakage current and electric strength)	-	500	-
9(Starting of motor operation test requirements and tests)	-	500	-
4(General requirement)	-	500	-
7(Marking and instructions)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
27(Provision for earthing)	-	500	-
26(Terminals for external conductors)	-	500	-
25(Supply connection and external flexible cords)	-	500	-
24(Components)	-	500	-
23(General)	-	500	-
22(Construction verification related test)	-	500	-
21(Mechanical Strength Test)	-	500	-
20(Stability test)	-	500	-
19(Abnormal Operation)	-	500	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
16.0(General)	-	500	-
15.0(General)	-	500	-
14(Transient Over Voltages)	-	500	-
13.1(General)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
11.1(General)	-	500	-
11.2(General)	-	500	-
11.3(Heating)	-	500	-
10.1(Power input)	-	500	-
10.2(Current input)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
30.1(Ball pressure test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.2(Needle Flame Test)	-	500	-
31(Resistance to Rusting)	-	500	-
32(Radiation Toxicity and Similar Hazards)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
18(Endurance Test requirements and tests)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.2(Spillage Test)	-	500	-
15.3(Humidity Test)	-	500	-
16.1(General)	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
19.11.4.7(Harmonics)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.5(Immunity to conducted discharges)	-	500	-
11.8(Temperature rise)	-	500	-
11.7(Duration corresponding)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.6(Combined appliances)	-	500	-
11.4(Heating appliances)	-	500	-
4(General Requirement)	-	500	-
5(General conditions for tests)	-	500	-
6(Classifications)	-	500	-
18(Endurance)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
16(Leakage current and electric strength)	-	500	-
9(Starting of motor operation test requirements and tests)	-	500	-
4(General requirement)	-	500	-

05 Nov, 2026

-
Included w.e.f.08.11.2024 Exclusion cl 19.11.4.1 (Electrostatic discharges) cl 19.11.4.2 (Radiated fields) cl 19.11.4.3 (Fast transient bursts) cl 19.11.4.4 (Surge immunity test)

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

40000 View breakup
(Automatic Data Processing Machine, Laptop/Notebook/Tablet, Printers, Plotters, Scanners, Set Top Box, Telephone Answering Machines, Wireless Keyboards, Cash Registers, Copying Machines/Duplicators, Passport Reader, Point Of Sale Terminals, Mail Processing Machines/Postage Machines/Franking Machines, Power Banks For Use In Portable Applications, Smart Card Reader, Mobile Phones, Visual Display Units, Videos Monitors Of Screen Size 32" And Above, Power Adaptors For It Equipments, Visual Display Units, Video Monitors Of Screen Size Upto 32, Cctv Cameras/Cctv Recorders, Usb Driven Barcode Reader, Barcode Scanners/Iris Scanners/Optical Fingerprint, Smart Watches, Scanners, Keyboard, Digital Camera, Automatic Teller Cash Dispensing Machines, Usb Type External Solid State Storage Devices (Above 256 Gb Capacity), Stand Alone Switch Mode Power Supplies (Smps) With Output Voltage 48 V (Max), USB Type External Hard Disk Drive) Rs.- 40000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	1000	10 % DISCOUNT TO BIS
1.6(Power interface .)	-	1000	10 % DISCOUNT TO BIS
1.7(Markings and instructions)	-	2000	10 % DISCOUNT TO BIS
2.1(Protection from electric shock and energy hazards)	-	1000	10 % DISCOUNT TO BIS
2.2(SELV circuits)	-	1000	10 % DISCOUNT TO BIS
2.3(TNV circuits)	-	2000.00	10 % DISCOUNT TO BIS
2.4(Limited current circuits)	-	1000	10 % DISCOUNT TO BIS
2.5(Limited power sources .)	-	1000	10 % DISCOUNT TO BIS
2.6(Provisions for earthing and bonding)	-	1000	10 % DISCOUNT TO BIS
2.7(Overcurrent and earth fault protection in primary circuits)	-	1000.01	10 % DISCOUNT TO BIS
2.8(Safety interlocks)	-	1000	10 % DISCOUNT TO BIS
2.9(Electrical insulation)	-	5000	10 % DISCOUNT TO BIS
2.10(Clearances, creepage distances and distances through insulation)	-	2000.00	10 % DISCOUNT TO BIS
3.1(General)	-	1000.00	10 % DISCOUNT TO BIS
3.2(Connection to a mains supply)	-	1000.00	10 % DISCOUNT TO BIS
3.3(Wiring terminals for connection of external conductors)	-	1000.00	10 % DISCOUNT TO BIS
3.4(Disconnection from the mains supply)	-	1000.00	10 % DISCOUNT TO BIS
3.5(Interconnection of equipment)	-	1000.00	10 % DISCOUNT TO BIS
4.1(Stability)	-	1000	10 % DISCOUNT TO BIS
4.2(Mechanical strength)	-	1000	10 % DISCOUNT TO BIS
4.3(Design and construction)	-	1000	10 % DISCOUNT TO BIS
4.4(Protection against hazardous moving parts)	-	1000	10 % DISCOUNT TO BIS
4.5(Thermal requirements)	-	1000	10 % DISCOUNT TO BIS
4.6(Openings in enclosures)	-	1000	10 % DISCOUNT TO BIS
4.7(Resistance to fire)	-	1000	10 % DISCOUNT TO BIS
5.1(Touch current and protective conductor curren)	-	1000	10 % DISCOUNT TO BIS
5.2(Electric strength)	-	1000	10 % DISCOUNT TO BIS
5.3(Abnormal operating and fault conditions)	-	1000	10 % DISCOUNT TO BIS
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	10 % DISCOUNT TO BIS
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1000	10 % DISCOUNT TO BIS
6.3(Protection of the telecommunication wiring system from overheating)	-	1000	10 % DISCOUNT TO BIS
7.1(General)	-	500	10 % DISCOUNT TO BIS
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	500	10 % DISCOUNT TO BIS
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	500	10 % DISCOUNT TO BIS
7.4(Insulation between primary circuits and cable distribution systems)	-	500	10 % DISCOUNT TO BIS
Annex C(Transformers)	-	1000	10 % DISCOUNT TO BIS
Annex K(Thermal Control)	-	1000	10 % DISCOUNT TO BIS
Annex EE(Household and home/ office document/ media shredders)	-	999.98	10 % DISCOUNT TO BIS
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	1000	10 % DISCOUNT TO BIS
Annex B(Motor tests under abnormal conditions)	-	1000	10 % DISCOUNT TO BIS
Annex Q(Voltage Dependent Resistors)	-	1000	10 % DISCOUNT TO BIS
3.1.4(Internal wire)	-	1000	10 % DISCOUNT TO BIS
3.2.4(Appliance inlet /connector)	-	1000	10 % DISCOUNT TO BIS
3.2.4(Appliance inlet /connector)	-	1000	10 % DISCOUNT TO BIS
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	1000	10 % DISCOUNT TO BIS
2.10.6(PCB material)	-	1000	10 % DISCOUNT TO BIS
2.10.8.2(Thermal conditioning (thermal ageing))	-	1000	10 % DISCOUNT TO BIS
2.10.8.4(Abrasion resistance test)	-	1000	10 % DISCOUNT TO BIS
2.10.9(Thermal Cycling)	-	5000	10 % DISCOUNT TO BIS
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	1000	10 % DISCOUNT TO BIS
2.10.11(Tests for semiconductor devices and for cemented joints)	-	1000	10 % DISCOUNT TO BIS
2.10.12(Enclosed and sealed parts)	-	1000	10 % DISCOUNT TO BIS
2.10.5.3(Insulating Compound as Solid Insulation)	-	1000	10 % DISCOUNT TO BIS
2.10.5.6(Thin sheet materials)	-	1000	10 % DISCOUNT TO BIS
2.10.5.12(Wires in wound components)	-	1000	10 % DISCOUNT TO BIS
2.10.5.13(Winding wire)	-	1000	10 % DISCOUNT TO BIS
2.10.5.14(Additional insulation in wound components)	-	1000	10 % DISCOUNT TO BIS
4.3.11(Containers for liquids or gases)	-	1000	10 % DISCOUNT TO BIS
4.3.12(Flammable liquids)	-	1000	10 % DISCOUNT TO BIS
1.5(Components)	-	1000	10 % DISCOUNT TO BIS
2.10.4.2(Material Group and Comparative Tracking Index)	-	1000	10 % DISCOUNT TO BIS
4.3.10(Dust, powders, liquids and gases)	-	1000	10 % DISCOUNT TO BIS
4.3.8(Batteries)	-	1000	10 % DISCOUNT TO BIS
Annex A3(Hot flaming oil test)	-	1000	10 % DISCOUNT TO BIS
2.8.2/2.8.5(Interlock switches)	-	1000	10 % DISCOUNT TO BIS
4.3.13.5(LED, laser class)	-	1000	10 % DISCOUNT TO BIS
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	1000	10 % DISCOUNT TO BIS
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	1000	10 % DISCOUNT TO BIS
1.5(Components)	-	1000	-
1.6(Power interface .)	-	1000	-
1.7(Markings and instructions)	-	1000	-
2.1(Protection from electric shock and energy hazards)	-	1000	-
2.2(SELV circuits)	-	1000	-
2.3(TNV circuits)	-	1000	-
2.4(Limited current circuits)	-	1000	-
2.5(Limited power sources .)	-	1000	-
2.6(Provisions for earthing and bonding)	-	1000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	1000	-
2.8(Safety interlocks)	-	1000	-
2.9(Electrical insulation)	-	5000	-
2.10(Clearances, creepage distances and distances through insulation)	-	2000	-
3.1(General)	-	1000	-
3.2(Connection to a mains supply)	-	1000	-
3.3(Wiring terminals for connection of external conductors)	-	1000	-
3.4(Disconnection from the mains supply)	-	1000	-
3.5(Interconnection of equipment)	-	1000	-
4.1(Stability)	-	1000	-
4.2(Mechanical strength)	-	1000	-
4.3(Design and construction)	-	1000	-
4.4(Protection against hazardous moving parts)	-	1000	-
4.5(Thermal requirements)	-	1000	-
4.6(Openings in enclosures)	-	1000	-
4.7(Resistance to fire)	-	1000	-
5.1(Touch current and protective conductor curren)	-	1000	-
5.2(Electric strength)	-	1000	-
5.3(Abnormal operating and fault conditions)	-	1000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	1000	-
7.1(General)	-	1000	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	-
Annex C(Transformers)	-	1000	-
Annex K(Thermal Control)	-	1000	-
Annex EE(Household and home/ office document/ media shredders)	-	1000	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	1000	-
Annex B(Motor tests under abnormal conditions)	-	1000	-
Annex Q(Voltage Dependent Resistors)	-	1000	-
3.1.4(Internal wire)	-	1000	-
3.2.4(Appliance inlet /connector)	-	1000	-
3.2.4(Appliance inlet /connector)	-	1000	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	1000	-
2.10.6(PCB material)	-	1000	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	1000	-
2.10.8.4(Abrasion resistance test)	-	1000	-
2.10.9(Thermal Cycling)	-	1000	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	1000	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	1000	-
2.10.12(Enclosed and sealed parts)	-	1000	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	1000	-
2.10.5.6(Thin sheet materials)	-	1000	-
2.10.5.12(Wires in wound components)	-	1000	-
2.10.5.13(Winding wire)	-	1000	-
2.10.5.14(Additional insulation in wound components)	-	1000	-
4.3.11(Containers for liquids or gases)	-	1000	-
4.3.12(Flammable liquids)	-	1000	-
1.5(Components)	-	1000	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	1000	-
4.3.10(Dust, powders, liquids and gases)	-	1000	-
4.3.8(Batteries)	-	1000	-
Annex A3(Hot flaming oil test)	-	1000	-
2.8.2/2.8.5(Interlock switches)	-	1000	-
4.3.13.5(LED, laser class)	-	1000	-
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	1000	-
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	1000	-
1.6(Power interface .)	-	1000	-
1.7(Markings and instructions)	-	1000	-
2.1(Protection from electric shock and energy hazards)	-	1000	-
2.2(SELV circuits)	-	2000	-
2.3(TNV circuits)	-	2000	-
2.4(Limited current circuits)	-	1000	-
2.5(Limited power sources .)	-	1000	-
2.6(Provisions for earthing and bonding)	-	1000	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	1000	-
2.8(Safety interlocks)	-	1000	-
2.9(Electrical insulation)	-	1000	-
2.10(Clearances, creepage distances and distances through insulation)	-	1000	-
3.1(General)	-	1000	-
3.2(Connection to a mains supply)	-	1000	-
3.3(Wiring terminals for connection of external conductors)	-	1000	-
3.4(Disconnection from the mains supply)	-	1000	-
3.5(Interconnection of equipment)	-	1000	-
4.1(Stability)	-	1000	-
4.2(Mechanical strength)	-	1000	-
4.3(Design and construction)	-	1000	-
4.4(Protection against hazardous moving parts)	-	1000	-
4.5(Thermal requirements)	-	1000	-
4.6(Openings in enclosures)	-	1000	-
4.7(Resistance to fire)	-	1000	-
5.1(Touch current and protective conductor curren)	-	1000	-
5.2(Electric strength)	-	1000	-
5.3(Abnormal operating and fault conditions)	-	1000	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	1000	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	1000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	1000	-
7.1(General)	-	1000	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	1000	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	1000	-
7.4(Insulation between primary circuits and cable distribution systems)	-	1000	-
Annex C(Transformers)	-	1000	-
Annex K(Thermal Control)	-	1000	-
Annex EE(Household and home/ office document/ media shredders)	-	1000	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	1000	-
Annex B(Motor tests under abnormal conditions)	-	1000	-
Annex Q(Voltage Dependent Resistors)	-	1000	-
3.1.4(Internal wire)	-	1000	-
3.2.4(Appliance inlet /connector)	-	1000	-
3.2.4(Appliance inlet /connector)	-	1000	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	1000	-
2.10.6(PCB material)	-	1000	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	1000	-
2.10.8.4(Abrasion resistance test)	-	1000	-
2.10.9(Thermal Cycling)	-	1000	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	1000	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	1000	-
2.10.12(Enclosed and sealed parts)	-	1000	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	1000	-
2.10.5.6(Thin sheet materials)	-	1000	-
2.10.5.12(Wires in wound components)	-	1000	-
2.10.5.13(Winding wire)	-	1000	-
2.10.5.14(Additional insulation in wound components)	-	1000	-
4.3.11(Containers for liquids or gases)	-	1000	-
4.3.12(Flammable liquids)	-	1000	-
1.5(Components)	-	1000	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	1000	-
4.3.10(Dust, powders, liquids and gases)	-	1000	-
4.3.8(Batteries)	-	1000	-
Annex A3(Hot flaming oil test)	-	1000	-
2.8.2/2.8.5(Interlock switches)	-	1000	-
4.3.13.5(LED, laser class)	-	1000	-
4.3.13.4(Human exposure to ultraviolet (UV) radiation)	-	1000	-
4.3.13.3/ Annex Y(Effect of UV radiation on material/Ultraviolet conditioning test)	-	1000	-

05 Nov, 2026

-
Included w.e.f. 30.05.2024 Exclusion: Cl.2.8.7 (Switches and Relay), Cl.2.10.5.4 (Opto-coupler), Annex CC (Evaluation of integrated circuit (IC) current limiters), Annex U (Insulating winding wires for use without interleaved insulation), Cl. 2.10.5.11 (SMPS Transformer and Inductor), Cl. 4.2.8 (Cathode Ray Tubes), CL. 4.3.13.2 (Ionizing radiation, EFFECT OF UV RADIATION), Cl. 4.6.2 (Bottoms of fire enclosures), Cl. 1.5 (Components), Cl. 4.3.13.4 (Human exposure to ultraviolet (UV) radiation), Cl. 4.3.13.5 (LED, laser class), Annex A3 (Hot flaming oil test)

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

42000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.6(Marking)	-	1000	-
21.7(Construction)	-	5000	-
21.8(Creepage Distance and Clearances)	-	2000	-
21.10(Terminals)	-	2000	-
21.11(External & Internal Wiring)	-	6000	-
21.12(Protection against electric shock)	-	8000	-
21.13(Endurance Tests and Thermal Tests)	-	4000	-
21.14(Resistance to Dust & Moisture)	-	8000	-
21.15(Insulation Resistance and Electric Strength)	-	2000	-
21.16(Resistance to Heat , fire and tracking)	-	4000	-

05 Nov, 2026

-
Exclusion: Cl.21.7.4 & 6.14.2 of Annex-A (Electrical endurance), Cl.21.7.4 & 6.14.3 of Annex-A, (Bending (Non-rewirable connector))

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

33000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
8(Terminals)	-	2000	-
9(PROVISION FOR EARTHING)	-	2000	-
11(Mositure Resistance and Insulation)	-	8000	-
12(Electric Strength)	-	2000	-
13(Fault conditions)	-	5000	-
15(Construction)	-	2000	-
16(Creepage distance and clearances)	-	2000	-
18(Resistance to heat, fire and tracking)	-	4000	-
19(Resistance to corrosion)	-	1000	-
21(Heat management)	-	0	-
10(Protection against accidental contact with live parts)	-	2000	-
17(Screws, current carrying parts and connections)	-	2000	-

05 Nov, 2026

-
-

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.6(Marking)	-	1000	-
20.7(Construction)	-	5000	-
20.8(Creepage Distance and Clearances)	-	1000	-
20.10(Terminals)	-	2000	-
20.11(External & Internal Wiring)	-	6000	-
20.12(Protection against electric shock)	-	8000	-
20.13(Endurance Tests and Thermal Tests)	-	6000	-
20.14(Resistance to Dust & Moisture)	-	2000	-
20.15(Insulation Resistance and Electric Strength)	-	7000	-
20.16(Resistance to Heat , fire and tracking)	-	7000	-

05 Nov, 2026

-
Exclusion: Cl.20.7.4 & Cl.6.14.2 of Annex A (Electrical endurance (CBC)), Cl.20.7.4 & Cl.6.14.3 of Annex A (Bendings (Nonrewireable connectors))

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

31000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	1000	-
6(Interchangeability)	-	3000	-
7(Protection against accidental contact with live parts)	-	2000	-
8(Insulation Resistance and Electric Strength)	-	10000	-
9(MECHANICAL STRENGTH)	-	2000	-
10(cap temperature)	-	5000	-
11(Resistance to Heat)	-	2000	-
12(Resistance to Flame and Ignition)	-	6000	-
14(Creepage distance and clearances)	-	2000	-
13(Fault conditions)	-	5000	-

05 Nov, 2026

-
-

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	1000	-
7.0(Construction)	-	4000	-
8.0(Creepage Distance and Clearances)	-	1000	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	4000	-
12.0(Protection against electric shock)	-	1000	-
13.0(Endurance Tests and Thermal Tests)	-	4000	-
14.0(Resistance to Dust & Moisture)	-	8000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	6000	-

05 Nov, 2026

-
-

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

35500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	1000	-
9(Terminals)	-	2000	-
10(PROVISION FOR EARTHING)	-	2000	-
11(MOISTURE RESISTANCE)	-	8000	-
12(Electric Strength)	-	2000	-
14(Fault conditions)	-	5000	-
16(Construction)	-	2000	-
17(Creepage distance and clearances)	-	2000	-
18(Screws, current carrying parts and connections)	-	2000	-
19(Resistance to heat, fire and tracking)	-	4000	-
20(Resistance to corrosion)	-	1000	-
15(Transformer heating)	-	2000	-
8(Protection against accidental contact with live parts)	-	2500	-

05 Nov, 2026

-
-

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	1000	-
7.0(Construction)	-	7000	-
8.0(Creepage Distance and Clearances)	-	1000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	2000	-
12.0(Protection against electric shock)	-	1000	-
13.0(Endurance Tests and Thermal Tests)	-	2000	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	2000	-
17.0(Photometric Test)	-	18000	-

05 Nov, 2026

-
-

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	1000	-
7.0(Construction)	-	7000	-
8.0(Creepage Distance and Clearances)	-	1000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	2000	-
11.0(External & Internal Wiring)	-	2000	-
12.0(Protection against electric shock)	-	1000	-
13.0(Endurance Tests and Thermal Tests)	-	2000	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	2000	-
17.0(Photometric Test)	-	18000	-

05 Nov, 2026

-
-

IS 10322 : Part 5 : Sec 2 (2012)

Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	1000	-
7(Construction)	-	2000	-
8(Creepage Distance and Clearances)	-	1000	-
9(Provision for earthing)	-	2000	-
10(Terminals)	-	2000	-
11(External & Internal Wiring)	-	2000	-
12(Protection against electric shock)	-	1000	-
13(Endurance Tests and Thermal Tests)	-	2000	-
14(Resistance to Dust and Moisture)	-	5000	-
15(Insulation Resistance and Electric Strength)	-	2000	-
16(Resistance to Heat , fire and tracking)	-	2000	-
17(Photometric Test)	-	18000	-

05 Nov, 2026

-
-

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	1000	-
7.0(Construction)	-	2000	-
8.0(Creepage Distance and Clearances)	-	1000	-
9.0(Provision for earthing)	-	2000	-
10.0(Terminals)	-	2000	-
12.0(Protection against electric shock)	-	1000	-
11.0(External & Internal Wiring)	-	2000	-
13.0(Endurance Tests and Thermal Tests)	-	2000	-
14.0(Resistance to Dust & Moisture)	-	5000	-
15.0(Insulation Resistance and Electric Strength)	-	2000	-
16.0(Resistance to Heat , fire and tracking)	-	2000	-
17.0(Photometric Test)	-	18000	-

05 Nov, 2026

-
-

Bureau of Indian Standards

The National Standards Body of India

Planet Electro Labs Private Limited (407)

WZ-407/B-1, BASAI DARAPUR, NEAR RAMESH NAGAR METRO STATION,NEW DELHI, NEW DELHI, West, Delhi, 110015

9971932901 PLANETLABSIND@gmail.com

Scope List