BIS - LIMS (Laboratory Information Management System)

Electronic Safety Test Laboratory, EMC Division, SAMEER-Centre for Microwave Research

Sector-7, Rain Tree Marg, CBD Belapur, Navi Mumbai, Navi Mumbai, Raigad, Maharashtra, 400614

9869015506 gautam@sameer.gov.in

Scope List

Reset

3 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

105900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	3600	-
7(Marking and instructions)	-	3000	-
8(Protection against live parts)	-	4300	-
10(POWER INPUT AND CURRENT)	-	4400	-
11(HEATING)	-	6200	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	5800	-
14(IMPULSE VOLTAGE TEST)	-	5300	-
15(HUMIDITY TREATMENT TEST)	-	7600	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	5800	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	6100	-
18(ENDURANCE)	-	3800	-
19(ABNORMAL OPERATION)	-	6600	-
20(STABILITY AND MECHANICAL HAZARDS)	-	3400	-
21(MECHANICAL STRENGTH)	-	4000	-
22(CONSTRUCTION)	-	14000	-
23(INTERNAL WIRING)	-	3600	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	3700	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3100	-
27(PROVISION FOR EARTHING)	-	3600	-
28(SCREWS AND CONNECTIONS)	-	3000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	4200	-
30(RESISTANCE TO HEAT AND FIRE)	-	11000	-
31(RESISTANCE TO RUSTING)	-	5200	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	4400	-

04 Dec, 2028

-
Exclusion: 22.32 (Oxygen bomb for rubber material) 22.46 (Software) 24 (COMPONENTS)

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

107000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2900	-
7(Heating under normal operating conditions)	-	9200	-
8(Constructional requirements with regard to the protection against electric shock)	-	15700	-
9(Electric shock hazard under normal operating conditions)	-	8000	-
10(Insulation requirements)	-	7800	Except Cl. 10.3
11(Fault conditions)	-	6400	-
12(Mechanical strength)	-	9500	Except Cl. 12.1.1 and 12.1.3
13(CLEARANCES and CREEPAGE DISTANCES)	-	12400	-
15(TERMINALS)	-	7500	-
16(External flexible cords)	-	6500	-
17(Electrical connections and mechanical fixings)	-	3500	-
19(Stability and mechanical hazards)	-	4000	-
15(Internal wires and power cords)	-	7500	-
16.3b(Cord Bending Test)	-	0	-
4(General test conditions)	-	6000	-
Cl.5.1 of Cl.5(General requirements)	-	2900	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	2900	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	2900	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	2900	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	2900	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	2900	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	2900	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	2900	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	5900	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	2900	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	5900	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	2900	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	2900	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	2900	-
Cl.5.3 of Cl.5(Terminals)	-	2900	-
Cl.5.3a) of Cl.5(Earth terminal)	-	2900	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	5900	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	2900	-
Cl.5.4 of Cl.5(Caution marking)	-	2900	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	2900	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	5900	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	2900	-
Cl.5.5 of Cl.5(Instructions)	-	2900	-
Cl.5.5 of Cl.5(Instructions)	-	2900	-
Cl.5.5 of Cl.5(Instructions)	-	5900	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	2900	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	5900	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	5900	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	2900	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	2900	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	2900	-
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	2900	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	5900	-
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	2900	-
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	2900	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	5900	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	5900	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	2900	-
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	2900	-
Cl.7.1 of Cl.7(General)	-	6100	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	6100	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	6100	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	6100	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	6100	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	6100	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	6100	-
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	6100	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	0	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	5200	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	7000	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	0	-
Cl.8.5 of Cl.8(Class I apparatus*)	-	0	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	0	-
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	0	-
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	0	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	0	-
Cl.8.6 of Cl.8(Class II apparatus)	-	0	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	2900	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	2900	-
Cl.8.7 of Cl.8(Components bridging insulation)	-	0	-
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	0	-
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	0	-
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	0	-
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	0	-
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	0	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	3600	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	3600	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	3600	-
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	3600	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	3600	-
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	3600	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	3600	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	3600	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	3600	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	3600	-
Cl.8.11 of Cl.8(Detaching of wires)	-	7300	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	7300	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	7300	Depending upon Numbers of test day
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	3000	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	3000	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	3000	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	0	-
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	6300	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	0	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	0	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	0	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	0	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	0	-
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	0	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	0	-
Cl.9.1 of Cl.9(Testing on the outside)	-	20800	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	8100	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	11800	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	8100	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	11800	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	5000	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	5000	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	0	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	5000	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	5000	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	3100	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	5000	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	3000	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	3000	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	3000	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	3000	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	3000	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	3700	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	3700	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	3700	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	3700	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	3000	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	3000	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	3000	-
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	3000	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	5200	-
Cl.10.3 of Cl.10(Humidity treatment)	-	6300	Depending upon Numbers of test day
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	3700	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	3700	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	3700	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	3700	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	3700	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	6800	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	6800	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	6800	-
Cl.11.2 of Cl.11(Heating)	-	6800	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	6800	-
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	0	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	0	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	0	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	0	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	0	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	0	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	0	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	0	-
Cl.11.2.6 of Cl.11.2(Windings )	-	0	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	0	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	3200	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	7300	Depending upon Numbers of test day
Cl.12.1.4 of Cl.12.1(Impact test)	-	4300	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	4300	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	4300	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	3400	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	2900	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	3000	-
Cl.12.4 of Cl.12(Drawers )	-	3000	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	3200	-
Cl.12.5 a) of Cl.12(Endurance test,)	-	3200	-
Cl.12.5 b) of Cl.12(Impact test,)	-	3200	-
Cl.12.5 c) of Cl.12(Torque test)	-	3200	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	3000	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	0	-
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	0	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	0	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	3200	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	0	-
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	0	-
Cl.12.7.3 of Cl.12.7(Tests)	-	0	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	0	-
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	10700	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	3400	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	4300	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	3000	-
Cl.12.7.4 of Cl.12.7(Compliance)	-	3000	-
Cl.13.1 of Cl.13(General)	-	0	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	4300	-
Cl.13.3 of Cl.13(Clearances)	-	11400	-
Cl.13.3.1 of Cl.13.3(General)	-	0	-
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	0	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	0	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	8400	-
Cl.13.4 a) of Cl.13(Creepage distances )	-	3500	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	3500	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	3500	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	4900	-
Cl.13.6 b) of Cl.13(Jointed insulation )	-	4900	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	4900	-
Cl.13.6 d) of Cl.13(Jointed insulation )	-	4900	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	3700	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	0	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	2900	-
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	2900	-
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	2900	-
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	2900	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	2900	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	0	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	0	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	3600	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	3600	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	3600	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	3600	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	3600	-
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	3600	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	2900	-
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	0	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	0	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	0	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	0	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	0	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	0	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	0	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	2900	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	2900	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	2900	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	2900	-
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	2900	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	0	-
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	0	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	0	-
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	0	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	6800	-
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	6800	-
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	6800	-
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	0	-
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	6800	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	0	-
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	0	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	2900	-
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	0	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	6800	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	3100	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	3100	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	3100	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	3100	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	0	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	0	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	0	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	3000	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	3000	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	3000	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	0	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	3000	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	3000	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	0	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	0	-
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	0	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	3100	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	0	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	3000	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	3000	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	3300	-
Cl.19.1 of Cl.19(Stability requirements)	-	3300	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	3300	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	3300	-
Cl.19.3 of Cl.19(Vertical force test )	-	3000	-
Cl.19.4 of Cl.19(Horizontal force test)	-	3000	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	0	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	3000	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	0	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	2900	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	3100	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	3100	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	3100	-
Cl.20.1 of Cl.20(Requirements)	-	6600	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	2900	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	0	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	0	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	2900	-
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	3200	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	4400	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	4400	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	4400	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	4200	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	4200	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	4200	-
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	4200	-
Cl.10.2 of Cl.10(Surge Test)	-	5100	-
Cl.10.2 a) of Cl.10(Surge Test)	-	5100	-
Cl.10.2 b) of Cl.10(Surge Test)	-	5100	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	5100	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	5100	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	5100	-
20(Resistance to fire)	-	4400	-
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	8300	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	6300	-
8.16(Wound Component)	-	6300	-
Cl.20.2.4 of Cl.20.2(Printed boards)	-	8300	-
20.2.4(Printed Boards)	-	8300	-
3(General requirements)	-	0	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	6800	-
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	0	The test charges are covered in Clause No. 10

04 Dec, 2028

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

109300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	3500	-
1.6(Power interface .)	-	4900	-
1.7(Markings and instructions)	-	2900	-
2.1(Protection from electric shock and energy hazards)	-	20100	-
2.2(SELV circuits)	-	3500	-
2.3(TNV circuits)	-	3600	-
2.4(Limited current circuits)	-	4900	-
2.5(Limited power sources .)	-	4700	-
2.6(Provisions for earthing and bonding)	-	6500	-
2.9(Electrical insulation)	-	0	Depending upon Numbers of test day
2.10(Clearances, creepage distances and distances through insulation)	-	54500	-
3.1(General)	-	6500	-
3.2(Connection to a mains supply)	-	3900	-
4.1(Stability)	-	3300	-
4.2(Mechanical strength)	-	16900	-
4.3(Design and construction)	-	6300	-
4.4(Protection against hazardous moving parts)	-	2900	-
4.5(Thermal requirements)	-	12500	-
4.6(Openings in enclosures)	-	2900	-
4.7(Resistance to fire)	-	7400	-
5.1(Touch current and protective conductor curren)	-	4200	-
5.2(Electric strength)	-	3600	-
5.3(Abnormal operating and fault conditions)	-	6800	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	3600	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	6000	-
6.3(Protection of the telecommunication wiring system from overheating)	-	4600	-
7.1(General)	-	0	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	0	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	6100	-
7.4(Insulation between primary circuits and cable distribution systems)	-	11200	-
2.8.2/2.8.5(Interlock switches)	-	0	-
2.8.7(Switches and Relay)	-	0	-
2.10.4.2(Material Group and Comparative Tracking Index)	-	3500	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	3600	-
2.10.5.6(Thin sheet materials)	-	3600	-
2.10.6(PCB material)	-	0	-
2.10.8.4(Abrasion resistance test)	-	3700	-
2.10.9(Thermal Cycling)	-	7700	Depends on numbers of test day
3.1.4(Internal wire)	-	3500	-
3.2.4(Appliance inlet /connector)	-	3000	-
3.2.4(Appliance inlet /connector)	-	3000	-
4.3.8(Batteries)	-	0	-
4.3.10(Dust, powders, liquids and gases)	-	0	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	0	-
4.3.13.5(LED, laser class)	-	0	-
Annex U(Insulating winding wires for use without interleaved insulation)	-	3700	U.2.3 (flexibility and adherence )not possible , Charges depends on numbers of test day
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	6800	Depends on numbers of test day
Annex K(Thermal Control)	-	5400	-
1.5(Components)	-	3500	-
Annex B(Motor tests under abnormal conditions)	-	5400	-
Annex C(Transformers)	-	5400	-
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	3000	-
4.6.2(Bottoms of fire enclosures)	-	0	-
2.10.5.4(Opto-coupler)	-	7000	-
3.3(Wiring terminals for connection of external conductors)	-	3000	-
3.4(Disconnection from the mains supply)	-	0	-
3.5(Interconnection of equipment)	-	0	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	3600	-
2.8(Safety interlocks)	-	0	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	3000	Depends of Numbers of test day

04 Dec, 2028

-
Exclusion: 2.8 (Safety interlocks) 2.10.5.11 (SMPS Transformer and Inductor) 2.10.5.12 (Wires in wound components) 2.10.5.13 (Winding wire) 2.10.5.14 (Additional insulation in wound components) 2.10.10 (Test for Pollution Degree 1 environment and for insulating compound) 2.10.11 (Tests for semiconductor devices and for cemented joints) 2.10.12 (Enclosed and sealed parts) 4.2.8 (Cathode Ray Tubes) 4.3.11 (Containers for liquids or gases) 4.3.12 (Flammable liquids) 4.3.13.2 (Ionizing radiation) 4.3.13.3/ Annex Y (Effect of UV radiation on material/Ultraviolet conditioning test) 4.3.13.4 (Human exposure to ultraviolet (UV) radiation) Annex Q (Voltage Dependent Resistors) Annex A3 (Hot flaming oil test)

Bureau of Indian Standards

The National Standards Body of India

Electronic Safety Test Laboratory, EMC Division, SAMEER-Centre for Microwave Research

Sector-7, Rain Tree Marg, CBD Belapur, Navi Mumbai, Navi Mumbai, Raigad, Maharashtra, 400614

9869015506 gautam@sameer.gov.in

Scope List