BIS - LIMS (Laboratory Information Management System)

BIS, Western Regional Laboratory (WRL)

BUREAU OF INDIAN STANDARDS (WESTERN REGIONAL LABORATORY), PLOT NO. E9, ROAD NO. 8, M.I.D.C, ANDHERI (EAST), MUMBAI, MAHARASHTRA, INDIA, MUMBAI, Mumbai Suburban, Maharashtra, 400093

- wrol@bis.gov.in

Scope List

Reset

180 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 4 ( Designation)	-
Cl 7 (Dimensions Of Pipes)	-
Cl 8 (Visual Appearance)	-
Cl 9.1 (Hydraulic Characteristics)	-
Cl 9.2 (Fusion Compatibility)	-
Cl 9.3 (Reversion Test )	-
Cl 9.4 & Annex B (Impact Strength)	-
Cl 9.5 (Density)	-
Cl 9.6 (Melt Flow Rate)	-
Cl 9.7 (Carbon Black Content & Dispersion)	-
Cl 9.9 (Opacity)	-
5 (Colour)	-

-
-

IS 14756 (2024)

Stainless Steel Utensils - Specification (THIRD REVISION)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6.7 (Nominal Capacity Test)	-
Cl 8 (Marking)	-
6.1 (Staining Test)	-
6.2 (Mechanical Shock Test)	-
Cl 4.3 (Classification)	-
Cl 5.1 (Manufacturing defect & visual appearance)	-
5 (Workmanship and finish)	-
4.2 (Thickness of the sheet)	-

-
-

IS 2721 (2003)

Galvanized steel chain link fence fabric - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.6.1, 6.2, Table 1 (Mesh Size)	-
Cl.6.3, Table 1 (Width of the fabric)	-
Cl.6.3, Table 1 (Length of the fabric)	-
Cl.6.1, 6.2, Table 1 (Nominal Dia of Mesh wire)	-
Cl. 7.2 and Table 1 (Line Wire (Diameter))	-
Cl. 7.2 and Table 1 (Line Wire (Number of wires))	-
Cl.9.1.1 (Tensile test of mesh and line wires- IS 1608)	-
Cl.9.1.2 (Wrapping test of mesh and line wires-IS 1755)	-
Cl.9.1.3 (Twist test of mesh and line wires-IS 1717)	-
Cl.9.1.4 (Bend test of mesh and line wires- IS 1608)	-

-
-

IS 12817 (2020)

Stainless Steel Butt Hinges - Specification ( Third Revision )

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.2, Table 1 to 6 (Length , A -IS 12817)	-
6.2, Table 1 to 6 (Breadth, B-IS 12817)	-
6.2, Table 1 to 6 (Breadth, B1-IS 12817)	-
6.2, Table 1 to 6 (Breadth, B2-IS 12817)	-
6.2, Table 1 to 6 (Thickness of flap, C-IS 12817)	-
6.2, Table 1 to 6 (Dia. of Hinge pin, D-IS 12817 )	-
6.2, Table 1 to 6 (Number of Knuckles- IS 12817 )	-
6.2, Table 1 to 6 (Number of Screw Holes -IS 12817 )	-
6.2, Table 1 to 6 (Holes for Screw Number- IS 12817 )	-
7.1 (General - IS 12817 )	-
7.2 (Knuckles - IS 12817 )	-
7.3 (Pins- IS 12817 )	-
7.4 (Screw Holes- IS 12817 )	-
7.4.2 (Position of screw holes - IS 12817 )	-
7.4.2, Fig 1 (The distance of the screw holes from the end of the flap - IS 12817 )	-
8.0 (Finish - IS 12817 )	-
6.2, Table 1 to 6 (Length , A -IS 12817)	-
6.2, Table 1 to 6 (Breadth, B-IS 12817)	-
6.2, Table 1 to 6 (Breadth, B1-IS 12817)	-
6.2, Table 1 to 6 (Breadth, B2-IS 12817)	-
6.2, Table 1 to 6 (Thickness of flap, C-IS 12817)	-
6.2, Table 1 to 6 (Dia. of Hinge pin, D-IS 12817 )	-
6.2, Table 1 to 6 (Number of Knuckles- IS 12817 )	-
6.2, Table 1 to 6 (Number of Screw Holes -IS 12817 )	-
6.2, Table 1 to 6 (Holes for Screw Number- IS 12817 )	-
7.1 (General - IS 12817 )	-
7.2 (Knuckles - IS 12817 )	-
7.3 (Pins- IS 12817 )	-
7.4 (Screw Holes- IS 12817 )	-
7.4.2 (Position of screw holes - IS 12817 )	-
7.4.2, Fig 1 (The distance of the screw holes from the end of the flap - IS 12817 )	-
8.0 (Finish - IS 12817 )	-

-
-

IS 1341 (2018)

Steel Butt Hinges - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3 Tables 2 to 9 (Types)	-
5.1 Tables 2 to 9 (2) (Size of Hinge)	-
5.1 Tables 2 to 9 (3) (Length A)	-
5.1 Tables 2 to 9 (4) (Breadth B)	-
5.1 Tables 2 to 9 (4) (Breadth B1)	-
5.1 Tables 2 to 9 (4) (Breadth B2)	-
5.1 Tables 2 to 9 (5) (Thickness of Flap C)	-
5.1 Tables 2 to 9 (6) (Diameter of Hinge Pin D)	-
5.1 Tables 2 to 9 (7) (Number of Knuckles)	-
5.1 Tables 2 to 9 (9) (Holes for Screw No.)	-
6.1 (General)	-
6.1 (General)	-
6.1 (General)	-
6.2.1 (Knuckles)	-
6.3 (Pins)	-
6.4 (Screw Holes)	-
6.4.2 (Position of Holes)	-
6.4.2 (X)	-
6.4.2 (Y)	-
6.4.2 (Z)	-
7 (Finish)	-

-
-

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
As per Clause 10 (Dimension)	-
Clause - 7.1 (CARBON)	-

-
-

IS 1970 (2024)

Crop Protection Equipment - Hand-Operated Compression - Knapsack Sprayer - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-6.14 (Cut-off Device and Lance)	-

-
-

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
7 Table-3 iii a (Setting Time Initial)	-
7 Table-3 iii b (Setting Time Final)	-
7 Table-3 ii a (Expansion after aeration)	-
7 Table-3 ii a (Expansion by Le Chatelier)	-
7 Table-3 iv a (Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-
7 Table-3 iv b (Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-
7 Table-3 iv c (Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-
7 Table-3 i. (Fineness)	-
7 Table-3 ii b (Expansion by Autoclave)	-
6.1 Table-2 viii (Alkali content)	-
6.1 Table-2 vii (Chloride content)	-
6.1 Table-2 vi (Loss on ignition)	-
6.1 Table-2 v (Total Sulphur Content calculated as Sulphuric Anhydride)	-
6.1 Table-2 iv (Magnesia)	-
6.1 Table-2 iii. (Insoluble residue)	-
6.1 Table-2 ii. (Ratio of percentage of alumina to that of iron oxide)	-
6.1 Table-2 i. (Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-

-
-

IS 3854 (2023)

Switches for Domestic and Similar Purposes - Specification (Third Revision)

5850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-4 (General Requirements)	-
Cl-5 (General notes on tests)	-
Cl-6 (Rating)	-
Cl-7 (Classification)	-
Cl-8 (Marking)	-
Cl-9 (Checking of dimensions)	-
Cl-10.1, 10.2 (Prevention of Access to Live Parts)	-
Cl-10.3 (Requirements for Accessible Metal Parts)	-
Cl-10.4 (Requirements for Insulation of the Mechanism)	-
Cl. 10.5 (Requirements for Insulation of the Mechanism with Respect to the Surrounding Environment)	-
Cl-10.6 (Requirements for Switches Operated Indirectly)	-
Cl-10.7 (Requirements for Switches with Replaceable Pull Cord)	-
Cl-11 (Provision for earthing)	-
Cl-12 (Terminals)	-
Cl-13 (Constructional requirements)	-
Cl-14 (Mechanism)	-
Cl-15.1 (Resistance to Ageing)	-
Cl-15.2 (Protection Provided by Enclosures of Switches)	-
Cl-15.3 (Resistance to Humidity)	-
Cl-16.1 (General)	-
Cl-16.2 (Test for Measuring the Insulation Resistance)	-
Cl-16.3 (Electric Strength Test)	-
Cl-17 (Temperature rise)	-
Cl-18 (Making and breaking capacity)	-
Cl-19 (Normal operation)	-
19.1 (Test for Switches Intended for Inductive Loads)	-
19.2 (Test for Switches Intended for Externally Ballasted Lamp Loads)	-
19.3 (Test for Switches Intended for Self-ballasted Lamp Loads)	-
Cl-20 (Mechanical strength)	-
Cl-21 (Resistance to heat)	-
Cl-22 (Screws, current carrying parts and connections)	-
Cl-23 (Creepage distances, clearances and distance through sealing compound)	-
Cl-24.1 (Resistance to abnormal heat and fire)	-
Cl-24.2 (Resistance to tracking)	-
Cl-25 (Resistance to rusting)	-
13.5 (Attachment of knobs)	-
12.3.11(Table 11) (Test Current for the Verification of Electrical and Thermal Stresses in Normal Use of Screwless Terminals)	-
12.3.12(Table 13) (Deflection Test Forces)	-

-
Complete TF is available for varieties upto and including 32 A.

IS 15757 (2022)

FOLLOW-UP FORMULA-COMPLEMENTARY FOODS - SPECIFICATION (First Revision of IS 15757)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 4.8,Table 1 ,Sl No i) (Moisture)	-
Clause 4.8,Table 1 ,Sl No ii) (Total Milk Protein)	-
Clause 4.8,Table 1 ,Sl No iii) (Total Fat)	-
Clause 4.8,Table 2 ,Sl No iv) (Yeast and mould count)	-

-
-

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5 (Dimensions of pipe - i) Outside diameter)	-
5 (Dimensions of pipe - ii) Wall thickness minimum)	-
6 (Visual Appearance)	-
7.1 (Hydraulic Characteristics - Acceptance test)	-
7.2 (Reversion Test)	-
7.3 (Tensile Test- i) Tensile Strength)	-
7.3 (Tensile Test - ii)Elongation at Break)	-
7.5 (Density)	-
7.6 (Melt Flow Rate)	-
4.2 (Carbon black- b) Dispersion of carbon black)	-
4.1.3 (Workmanship and appearance)	-
6.1.3 (Weldability Test- b) Acceptance test)	-
6.1.2, 6.1.2.1 (Hydraulic Proof Test)	-
6.1.1, 6.1.1.1 (Leakage Test)	-
10 (Marking)	-

-
Test facility not available for: (1) Fusion Compatibility Test & (2) Long Term Hydrostatic Test (Quality Test)

IS 17399 (2020)

Textiles - Polypropylene ( PP )/ High Density Polyethylene ( HDPE ) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution - Specification

19450.00/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 7.3 (Marking on Sacks)	-
Clause 5.3 (Lamination with a thin film of polypropylene)	-
"Clause 5.2 Table 1(viii)" ("Ash content, Max, percent")	-
"Clause 5.2 Table 1(vii)" ("Elongation at break of fabric, percent:")	-
"Clause 5.2 Table 1(vi)" (Seam strength of bottom and side panel seam)	-
"Clause 5.2 Table 1(iv)" ("Mass of laminated sack, g")	-
6.1- Table 1- iii) (REQUIREMENTS - Picks per dm)	-
"Clause 5.2 Table 1(ii)" (Ends per dm)	-
"Clause 5.2 Table 1(i)" (Inside dimensions)	-
5.5 (Capacity)	-

-
Except fabric (clause 3.2 )

IS 16208 (2015)

Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification

Please see remarks View breakup
Testing charges for IS 16208:2015( including all parameters) : Rs 19750/- -Testing charges for IS 16208:2015( excluding UV Resistance test) : Rs 10450/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2 and Table 1 x (Ash content )	-
5.2 and Table 1 ix (Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-
5.2 and Table 1 viii b (Elongation at break of fabric Widthwise )	-
5.2 and Table 1 viii a (Elongation at break of fabric Lengthwise)	-
5.2 and Table 1 vi (Breaking strength of bottom seam )	-
5.2 and Table 1 vi b (Average breaking strength of fabric Widthwise )	-
5.2 and Table 1 vi a (Average breaking strength of fabric Lengthwise )	-
5.1 and Table 1 v (Mass of sack )	-
5.2 and Table 1 iv (Picks per dm )	-
5.2 and Table 1 iii (Ends per dm )	-
5.2 and Table 1 ii b (Dimensions Inside Width)	-
5.2 and Table 1 ii a (Dimensions Inside Length)	-
4.4 and Table 1 i (Capacity)	-
4.3 (Sacks)	-
4.2 (Construction)	-

-
0

IS 14968 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

9,400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 (Construction)	-
4.3 (Sacks)	-
5.2 and Table 1 ii a (Dimensions Inside Length)	-
5.2 and Table 1 ii b (Dimensions Inside Width)	-
5.2 and Table 1 iii (Ends per dm )	-
5.2 and Table 1 iv (Picks per dm )	-
5.1 and Table 1 v a (Mass of unlaminated sack IS 1964)	-
5.1 and Table 1 v b (Mass of unlaminated sack with liner )	-
5.2 and Table 1 vi a (Average breaking strength of fabric Lengthwise IS 1969 (Part 1))	-
5.2 and Table 1 vi b (Average breaking strength of fabric Widthwise IS 1969 (Part 1))	-
5.2 and Table 1 vi (Breaking strength of bottom seam IS 9030 )	-
5.2 and Table 1 viii a (Elongation at break of fabric Lengthwise IS 1969 (Part 1))	-
5.2 and Table 1 viii b (Elongation at break of fabric Widthwise IS 1969 (Part 1))	-
5.2 and Table 1 ix (Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-
5.2 and Table 1 x (Ash content )	-
4.3.1 (Stitches pass through a minimum of six layers of the fabric. )	-

-
Except clause 4.2 (Fabric)

IS 14252 (2015)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision)

13500 View breakup
Total testing charges =Rs. 12000 + 1395 + 100 = Rs.13495/- (Rounded off Rs.13500/-)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 and Table 1 ix (Ash content )	-
4.1 and Table 1 viii (Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-
4.1 and Table 1 vii b (Elongation at break of fabric Widthwise )	-
4.1 and Table 1 vii a (Elongation at break of fabric Lengthwise)	-
4.1 and Table 1 vi (Average Breaking strength of bottom seam )	-
4.1 and Table 1 v b (Average breaking strength of fabric Weftway )	-
4.1 and Table 1 v a (Average breaking strength of fabric Warpway )	-
4.2 and Table 1 iv (Mass of sack )	-
4.1 and Table 1 iii (Picks per dm )	-
4.1 and Table 1 ii (Ends per dm )	-
4.1 and Table 1 i b (Dimensions Outside Width)	-
4.1 and Table 1 i a (Dimensions Outside Length)	-
3.4 (Sack)	-
3.4.1 (Seam)	-

-
Except fabric (clause 3.2)

IS 12100 (1987)

Specification for high density polyethylene (HDPE) woven sacks for packing flour

6150 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1, Table 1 (Breaking strength of fabric on 5 × 20 cm strip, Widthwise)	-
3.1, Table 1 (Breaking strength of fabric on 5 × 20 cm strip, Lengthwise)	-
3.1, Table 1 (Seam breaking strength, Side team)	-
3.1, Table 1 (Seam breaking strength, Bottom team)	-
3.2 (Dimensions)	-
3.3 (Mass)	-

-
Except Fabric (clause 2.1)

IS 16187 (2014)

Textiles - High density polyethylene (HDPE)/ polypropylene (PP) leno woven sacks for packaging and storage of fruits and vegetables - Specification

Rs. 11480.00/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.3 (Requirements - Mass of Bale As per Annex C)	-
4.1- Table 1- vii) (Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of bottom /side seam (cut strip method), N (kgf))	-
4.1- Table 1- vi) (Requirements of HDPE/PP Leno Woven Sacks - Average breaking strength of fabric (cut strip method), N (kgf) a) Lengthwise b) Widthwise)	-
4.1- Table 1- v) (Requirements of HDPE/PP Leno Woven Sacks - Picks per dm)	-
4.1- Table 1- iv) (Requirements of HDPE/PP Leno Woven Sacks - Ends per dm)	-
4.1- Table 1- ii) (Requirements of HDPE/PP Leno Woven Sacks - Dimensions, cm a) Inside length b) Inside width)	-
4.1- Table 1- i) (Requirements of HDPE/PP Leno Woven Sacks - Capacity)	-

-
Except manufacturer (clause 3)

IS 13098 (2024)

AUTOMOTIVE VEHICLES TUBES FOR PNEUMATIC TYRES â SPECIFICATION (second revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 6 (MARKING)	-
Cl 5 (AIR TIGHTNESS)	-
Cl 4.1.4 (Accelerated Ageing)	-
Cl 4.1.3 (Set After Ageing)	-
Cl 4.1.2 (Strength of Splice)	-
Cl 4.1.1 (Elongation)	-
Cl 3.3.1 (Thickness Uniformity)	-
Cl 3.3 (Fit)	-
Cl 3.2 (Classification)	-
Cl 3.1 (Materials)	-

-
-

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl-7.3 (Tensile Test)	-
Cl-4.1 (Material)	-
Cl-5.1 (Dimensions of pipes and wall thicknesses)	-
Cl-6.0 (Visual Appearance)	-
Cl-7.1 (Hydraulic Characteristics- quality acceptance test)	-
Cl-7.2 (Reversion Test)	-
Cl-7.4 (Susceptibility to Environmental Stress Cracking)	-
5.1 & Table 1 (Dimensions of Pipes - Outside diameters)	-
5.1 & Table 1 (Dimensions of Pipes - Wall thickness)	-
4.2(b) (Carbon Black Dispersion-IS 2530)	-
7.3 (Elongation at Break)	-
Cl-11 (Marking)	-

-
The following test facilities are not available: (1) Hydraulic characteristics (quality test) (2) Carbon black content

IS 14543 (2024)

Packaged Drinking Water Other than Packaged Natural Mineral Water Specification Third Revision

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.3 (Appearance)	-
5.4/Annex D/i (P,P-DDT)	-
5.4/Annex D/ii (Lindane)	-
5.4/Annex D/iv (b-Endosulfan)	-
5.4/Annex D/xvi (Dieldrin)	-
5.4/Annex D/xvi (Aldrin)	-
5.4/Annex D/i (O,P-DDT)	-
5.4/Annex D/iv (a-Endosulfan)	-
5.4/Annex D/iii (d-HCH)	-
5.4/Annex D/i (O,P-DDD)	-
5.4/Annex D/i (P,P-DDE)	-
5.4/Annex D/i (O,P-DDE)	-
5.4/Annex D/iii (a-HCH)	-
5.4/Annex D/iii (β- HCH)	-
5.4/Annex D/iv (Endosulfan sulfate)	-
5.4/Annex D/i (P,P-DDD)	-
5.4/Annex D/xii (Alachlor)	-
5.4/Annex D/vii (Chlorpyrifos)	-
5.4/Annex D/x (Butachlor)	-
5.4/Annex D/vi (Ethion)	-
5.4/Annex D/xiv (Methyl parathion)	-
5.4/Annex D/xv (Malathion)	-
5.4/Annex D/viii (Phorate)	-
5.4/Annex D/v (Monochrotophos)	-
5.4/Annex D/xiii (Atrazine)	-
5.4/Annex D/viii (Phorate sulphoxide)	-
5.4/Annex D/viii (Phorate sulfone)	-
5.4/Annex D/xxvii (Methyl paraoxon)	-
5.4/Annex D/xxviii (Malaoxon)	-
5.4/Annex D/xi (Isoproturon)	-
5.4/Annex D/ix (2,4 –D)	-
Cl-5.3, Table-1 (i) (Colour, true colour units, Max)	-
Cl-5.3, Table-1 (ii) (Odour)	-
Cl-5.3, Table-1 (iii) (Taste)	-
Cl-5.3, Table-1 (iv) (Turbidity, nephelometric turbidity unit (NTU), Max)	-
Cl-5.3, Table-1 (v) (Total dissolved solids, mg/l, Max)	-
Cl-5.3, Table-1 (vi) (pH)	-
Cl-5.3, Table-2 (i) (Barium (as Ba))	-
Cl-5.3, Table-2 (ii) (Copper (as Cu))	-
Cl-5.3, Table-2 (iii) (Iron (as Fe))	-
Cl-5.3, Table-2 (iv) (Manganese (as Mn))	-
Cl-5.3, Table-2 (v) (Nitrate (as NO3 ))	-
Cl-5.3, Table-2 (vi) (Nitrite (as NO2 ))	-
Cl-5.3, Table-2 (vii) (Fluoride (as F))	-
Cl-5.3, Table-2 (viii) (Zinc (as Zn))	-
Cl-5.3, Table-2 (ix) (Silver (as Ag))	-
Cl-5.3, Table-2 (x) (Aluminium (as A1))	-
Cl-5.3, Table-2 (xi) (Chloride (as Cl))	-
Cl-5.3, Table-2 (xii) (Selenium (as Se))	-
Cl-5.3, Table-2 (xiii) (Sulphate (as SO4 ))	-
Cl-5.3, Table-2 (xiv) (Alkalinity (as HCO3 ))	-
Cl-5.3, Table-2 (xv) (Calcium (as Ca))	-
Cl-5.3, Table-2 (xvi) (Magnesium (as Mg))	-
Cl-5.3, Table-2 (xvii) (Sodium (as Na))	-
Cl-5.3, Table-2 (xviii) (Residual free chlorine)	-
Cl-5.3, Table-2 (xix) (Phenolic compounds (as C6H5OH))	-
Cl-5.3, Table-2 (xx) (Mineral oil)	-
Cl-5.3, Table-2 (xxi) (Anionic surface active agents)	-
Cl-5.3, Table-2 (xxii) (Sulphide)	-
Cl-5.3, Table-2 (xxiii) (Antimony (as Sb))	-
Cl-5.3, Table-2 (xxiv) (Borates (as B))	-
Cl-5.3, Table-2 (xxv) (Bromates (as BrO3 ))	-
Cl-5.3, Table-3 (i) (Mercury (as Hg))	-
Cl-5.3, Table-3 (ii) (Cadmium (as Cd))	-
Cl-5.3, Table-3 (iii) (Arsenic (as As))	-
Cl-5.3, Table-3 (v) (Lead (as Pb))	-
Cl-5.3, Table-3 (vi) (Chromium (as Cr))	-
Cl-5.3, Table-3 (vii) (Nickel (as Ni))	-
Cl-5.3, Table-3 (viii) (Polychlorinated biphenyl (PCB))	-
Cl-5.3, Table-3 (ix) (Polynuclear aromatic hydrocarbons)	-
Cl-5.3, Table-3 (x) (Uranium)	-
Cl-5.4 (i) (Pesticide residues considered individually)	-
Cl-5.4 (ii) (Total pesticide residue)	-
Cl-5.2.1 (Escherichia coli or thermotolerant bacteria)	-
Cl-5.2.2 (Coliform)	-
Cl-5.2.3 (Staphylococcus aureus)	-
Cl-5.2.4 (Sulphite Reducing Anaerobes)	-
Cl-5.2.5 (Pseudomonas Aeruginosa)	-
Cl-5.2.6 (Aerobic Microbial Count @ 37 deg C)	-
Cl-5.2.7 (Yeast and mould)	-
Cl-5.2.8 (Salmonella)	-
Cl-5.2.9 (Vibrio cholera)	-
Cl-5.2.3 (Faecal streptococci)	-
Cl-5.2.8 (shigella)	-
Cl-5.2.9 (V.parahaemolyticus)	-
5.2.6 (Aerobic Microbial Count @ 20 to 22 deg C)	-

-
Excluding Cyanide, Radio Active Elements. For testing of Pesticide Residues please indicate accordingly

IS 12586 (2021)

Brazed low carbon steel gas cylinders not exceeding 13 litre water capacity Specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.4 (Water capacity)	-
6.5 (Valve)	-
6.7 (Foot Ring)	-
8.2 (Leakage test)	-
12 (Marking)	-

-
Test facilities are not available for the following: (1) Peel Test

IS 14333 (2022)

Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent ï¿½ Specification (First Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.2.1,T2 (Melt Flow Rate (At 190°C /5kg)-IS 2530:1963)	-
7.1 (Visual Appearance- IS 14333-2022)	-
7.4,T3 of IS 4984 (Outside Diameter-IS 4984-2016)	-
7.4,T4 of IS 4984 (wall Thickness-IS 4984-2016)	-
7.4,T3 of IS 4984 (Ovality-IS 4984-2016)	-
8.2 ("Longitudinal Reversion Test - IS 4984-2016 (Annexure-F)")	-
5.2.1,T2 (Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B))	-

-
The following test facilities are not available: (1)Internal Pressure creep rupture test (2)Tensile Strength for Butt-fusion (3) Elongation at break (4) Slow Crack Growth rate test (5) Density (6) Depth of strip (7) Oxidation Induction Time (8) Overall Migration (9) Carbon Black content (10) For Size above 250 mm

IS 2347 (2023)

DOMESTIC PRESSURE COOKER ï¿½ SPECIFICATION

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.1 (Gross capacity)	-
4.2 (Body Capacity)	-
8.1 (Air Pressure Test )	-
6 (Construction)	-
7 (Workmanship and Finish )	-
8.2 (Proof Pressure Test )	-
8.3 (Operating Test for Pressure Regulating Device )	-
8.4 (Test for Safety Relief Device )	-
8.5 (Bursting Pressure Test )	-
8.6 (Test for Removal of Lid under Pressure )	-
8.14 (Ply construction cooker Body )	-

-
The following test facilities are not available: (1) Material as per Clause 5.1, 5.2, 5.5, 5.6, 5.7, 5.8, 5.9, 5.10, 5.11 (2) Test for Hard Anodized Surface. (3) Test for spring-loaded mechanism (4) Test for handle and knob. (5) Electrical Pressure cooker

IS 14493 : Part 5 (2018)

Multicore and symmetrical pair / quad cables for digital communications: Part 5 symmetrical pair / quad cables with transmission characteristics up to 1000 MHz - Horizontal floor wiring - Secal specification

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1 (General remarks)	-
5.2.1 (Conductor)	-
5.2.2 (Insulation)	-
5.2.3 (Cable element)	-
5.2.4 (Cable make-up)	-
5.2.5 (Screening of the cable core)	-
5.2.6 (Sheath)	-
5.2.7 (Identification)	-
5.2.8 (Finished cable)	-
6.1 (General remarks)	-
6.2.1 (Conductor resistor)	-
6.2.2 (Resistance unbalance)	-
6.2.3 (Dielectric strength)	-
6.2.4 (Insulation resistance)	-
6.2.9 (Current-carrying capacity)	-
6.4.3 (Tensile strength of the insulation)	-
6.4.2 (Elongation at break of the conductors)	-
6.2.9 (Current-carrying capacity)	-
6.4.3 (Tensile strength of the insulation)	-
6.4.2 (Elongation at break of the conductors)	-
6.4.4 (Elongation at break of the insulation)	-
6.4.5 (Adhesion of the insulation to the conductor)	-
6.4.6 (Elongation at break of the sheath)	-
6.4.7 (Tensile strength of the sheath)	-
6.4.9 (Impact test of the cable)	-
6.4.10 (Bending under tension)	-
6.4.12 (Tensile performance of the cable)	-
6.5.1 (Shrinkage of insulation)	-
6.5.3 (Bending test of insulation at low temperature)	-
6.5.4 (Elongation at break of the sheath after ageing)	-
6.5.5 (Tensile strength of the sheath after ageing)	-
6.5.7 (Cold bend test of the cable)	-
6.5.14 (Hygroscopicity)	-
6.5.16 (Flame propagation characteristics of a single cable)	-
6.5.17 (Flame propagation characteristics of bunched cables)	-
7.1 (General)	-

-
Test facility not available for the tests as per Cl. 6.2.3, Cl. 6.2.5, Cl. 6.2.6,Cl. 6.2.7, Cl. 6.3, Cl. 6.4.8, Cl. 6.4.8, Cl. 6.4.10, Cl. 6.5.10, Cl. 6.5.11, Cl. 6.5.14 to Cl. 6.5.21 and Cl. 7

IS 1165 (2022)

WHOLE MILK POWDER - SPECIFICATION (Sixth Revision of IS 1165)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Clause 3.5,Table 1 ,Sl No i) (Moisture)	-
Clause 3.5,Table 1 ,Sl No ii) (Total solids)	-
Clause 3.5,Table 1 ,Sl No iii) (Milk fat)	-
Clause 3.5,Table 1 ,Sl No iv) (Milk protein in milk solids not fat)	-
Clause 3.5,Table 1 ,Sl No v) (Insolubility index)	-
Clause 3.5,Table 1 ,Sl No vi) (Total ash(on dry basis))	-
Clause 3.5,Table 1 ,Sl No vii) (Titratable acidity (lactic acid),)	-
Clause 3.5,Table 1 ,Sl No viii) (Scorched particle)	-
Clause 3.5,Table 2 ,Sl No i) (Aerobic plate count)	-
Clause 3.5,Table 2 ,Sl No ii) (Coliform Count)	-
Clause 3.5,Table 2 ,Sl No iii) (Staphylococcus aureus(Coagulase positive))	-
Clause 3.5,Table 2 ,Sl No iv) (Yeast and mould count)	-
Clause 3.5,Table 2 ,Sl No v) (Salmonella sp)	-
Clause 3.5,Table 2 ,Sl No vi) (Listeria monocytogenes)	-
Clause 3.5,Table 2 ,Sl No vii) (Bacillus cereus)	-
Clause 3.5,Table 2 ,Sl No viii) (Sulphite reducing clostridia)	-
Clause 3.5,Table 2 ,Sl No ix) (E. coli)	-

-
Test facilities are not available for the following: "1. Lead, Arsenic, Aflatoxin M1, Melamine 2. As per Cl. 5.7 The pesticide residues, heavy metals, toxins (aflatoxins and other naturally occurring toxins) and contaminants, if any, in the product shall not exceed the limits as prescribed in the Food Safety and Standards (Contaminants, Toxins and Residues) Regulations, 2011.’ "

IS 15450 (2022)

Polyethylene-aluminium-polyethylene composite pressure pipes for hot and cold water supplies Specifications first revision of IS 15450

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9 (DIMENSIONS OF PIPE)	-
11.2 (Melt Flow Rate (Method of test as per Table 3))	-
11.5 (Carbon Black Content and Dispersion (Method of test as per Table 3))	-
11.9 (Apparent Tensile Strength of Pipe)	-
11.10 (Minimum Burst Pressure)	-
11.3 (Overall Migration)	-
11.3 (Overall Migration)	-
11.3 (Overall Migration)	-
11.4 (Thermal Stability to Oxidation (Method of test as per Table 3))	-

-
The following test facilities are not available: (1) Density Test (2)Carbon Black Content (3) Oxidation Induction Time (4)ADHESION TEST (5) APPARENT TENSILE STRENGTH TEST (6) Hydrostatic Pressure test (Short & Long) (7)Pigment Dispersion

IS 1166 (2022)

SWEETENED CONDENSED MILK, SWEETENED CONDENSED PARTLY SKIMMED MILK, SWEETENED CONDENSED SKIMMED MILK AND SWEETENED CONDENSD HIGH FAT MILK- SPECIFICATION (Third Revision of IS 1166)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
( Clauses 4.1 and 4.7) Tabel 1 (i) (Total milk solid)	-
( Clauses 4.1 and 4.7) Tabel 1 (ii) (Milk Fat)	-
( Clauses 4.1 and 4.7) Tabel 1 (iii) (Milk solid not fat)	-
( Clauses 4.1 and 4.7) Tabel 1 (iv) (Milk protien in milk solis not fat)	-
( Clauses 4.1 and 4.7) Tabel 1 (v) (Accelerated storage test)	-
"4.7 Table 2 (i) " (Aerobic plate count-IS 5402 (Part 1))	-
"4.7 Table 2 (ii) " (Coliform count-IS 5401 (Part 1))	-
(Clause 4.7) Tabel 2 (iii) (Staphylococcus Aureus (Coagulates positive))	-
(Clause 4.7) Tabel 2 (iv) (Yeast and mould count)	-
(Clause 4.7) Tabel 2 (v) (Salmonella)	-
(Clause 4.7) Tabel 2 (vi) (Listeria monocytogens)	-
(Clause 4.7) Tabel 2 (vii) (E Coli)	-

IS 14887 (2014)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

19750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4.2 and Table 1 ii (Dimensions )	-
5.2 and Table 1 iii (Ends per dm )	-
5.2 and Table 1 iv (Picks per dm )	-
4.2 and Table 1 v (Mass of sack )	-
4.2 and Table 1 vi (Average breaking strength of fabric )	-
4.2 and Table 1 vi (Breaking strength of bottom seam )	-
4.2 and Table 1 viii (Elongation at break of fabric )	-
4.2 and Table 1 ix (Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering )	-
3.3.1 (Bottom seam (IS 10789))	-
4.1 and 3.4 (Mass of bale (Cl. 4.1), Capacity (Cl 3.4))	-
4.2 and Table 1 x (Ash content )	-

-
Complete facility exist except for 3.1 ( Raw Material ) and 3.2 ( Fabric)

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

Rs.8330/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Classification- IS 302-1 )	-
6 (Classification- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.1 (Marking- IS 302-1)	-
7.3 (Marking- IS 302-1)	-
7.4 (Marking- IS 302-1)	-
7.6 (Marking- IS 302-1)	-
7.7 (Marking- IS 302-1)	-
7.8 (Marking- IS 302-1)	-
7.11 (Marking- IS 302-1)	-
7.12 (Marking- IS 302-1)	-
7.13 (Marking- IS 302-1)	-
7.14 (Marking- IS 302-1)	-
7.15 (Marking- IS 302-1)	-
7.101 (Marking)	-
8 ( Protection Against Electric Shock, IS 302-1)	-
10 (Power Input and Current, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
11 (Heating, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
13 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
14 (Transient Over Voltages, IS 302-1)	-
15.1 (Moisture Resistance, IS 302-1)	-
15.2 (Moisture Resistance, IS 302-1)	-
15.3 (Moisture Resistance, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-
16 (Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-
19.4 (Abnormal Operation, IS 302-1)	-
19.4 (Abnormal Operation, IS 302-1)	-
19.7 (Abnormal Operation)	-
19.9 (Abnormal Operation)	-
19.1 (Abnormal Operation)	-
19.101 (Abnormal Operation)	-
20.1 (Stability & Mechanical Hazards, IS 302-1)	-
20.2 (Stability & Mechanical Hazards, IS 302-1)	-
21.1 (Mechanical Strength, IS 302-1)	-
21.2 (Mechanical Strength, IS 302-1)	-
21.101 (Mechanical Strength, IS 302-2-3)	-
22.101 (Construction)	-
22 (Construction, IS 302-1)	-
22.102 (Construction)	-
22.103 (Construction)	-
22.104 (Construction)	-
22.105 (Construction)	-
22.106 (Construction)	-
22.107 (Construction)	-
23.1 (Internal Wiring, IS 302-1)	-
23.2 (Internal Wiring, IS 302-1)	-
23.3 (Internal Wiring, IS 302-1)	-
23.4 (Internal Wiring, IS 302-1)	-
23.5 (Internal Wiring, IS 302-1)	-
23.6 (Internal Wiring, IS 302-1)	-
23.7 (Internal Wiring, IS 302-1)	-
23.8 (Internal Wiring, IS 302-1)	-
23.9 (Internal Wiring, IS 302-1)	-
23.10 (Internal Wiring, IS 302-1)	-
24.1 (Components, IS 302-1)	-
24.2 (Components, IS 302-1)	-
24.4 (Components, IS 302-1)	-
24.5 (Components, IS 302-1)	-
24.6 (Components, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.5 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.6 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.7 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.8 (Supply Connection and External Flexible Cords, IS 302-1)	-
26.9 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.1 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.11 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.12 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.13 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.14 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.14 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.15 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.16 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.17 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.18 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.19 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.2 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.21 (Supply Connection and External Flexible Cords, IS 302-1)	-
25.22 (Supply Connection and External Flexible Cords, IS 302-1)	-
26 (Terminals for External Conductors, IS 302-1)	-
27.1 (Provision for Earthing, IS 302-1)	-
27.2 (Provision for Earthing, IS 302-1)	-
27.3 (Provision for Earthing, IS 302-1)	-
27.4 (Provision for Earthing, IS 302-1)	-
27.5 (Provision for Earthing, IS 302-1)	-
28 (Screws & Connections, IS 302-1)	-
29.1 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
29.2 (Clearances, Creepage distances and Solid Insulation, IS 302-1)	-
30.1 (Resistance to Heat, Fire & Tracking, IS 302-1)	-
30.2 (Resistance to Heat, Fire & Tracking, IS 302-1)	-
31 (Resistance of Rusting, IS 302-1)	-
32 (Radiation, Toxicity and similar Hazard IS 302-1)	-

-
The following test facilities for clauses are not available: 1. Cl 24.1.2 TF for switch endurance of steam iron 2. Clause 24 Components

IS 10500 (2012)

Drinking water - Specification (Second Revision)

- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
4. SL No.i)of Table I (Colour)	-
4.SL No.ii) of Table I (Odour)	-
4.SL No.iii)of Table I (pH)	-
4.SL No.v)of Table I (Turbidity, NTU, Max)	-
4.SL No.vi)of Table I (Total dissolved solids, mg/l, max)	-
table 2 sl.no 1 ( Aluminium (as Al), mg/l, Max)	-
table 2 sl.no 4 (Barium (as Ba), mg/l, Max)	-
table 2 sl.no 5 (Boron (as B), mg/l, Max)	-
table 2 sl.no 6 (Calcium (as Ca), mg/l, Max)	-
table 2 sl.no 9 (Copper (as Cu), mg/l, Max)	-
table 2 sl.no 10 ( Fluoride (as F) mg/l, Max)	-
table 2 sl.no 11 (Free residual chlorine, mg/l, Min)	-
table 2 sl.no 12 (Iron (as Fe), mg/l, Max)	-
table 2 sl.no 13 (Magnesium (as Mg), mg/l, Max)	-
table 2 sl.no 14 (Manganese (as Mn), mg/l, Max)	-
table 2 sl.no 16 (Nitrate (as NO3), mg/l, Max)	-
table 2 sl.no 18 (Selenium (as Se), mg/l, Ma)	-
table 2 sl.no 19 (Silver (as Ag), mg/l, Max)	-
table 2 sl.no 20 (Sulphate (as SO4) mg/l, Max)	-
table 2 sl.no 22 (Total alkalinity as calcium carbonate, mg/l, Max)	-
table 2 sl.no 24 (Zinc (as Zn), mg/l, Max)	-
TABLE 3 sl no 1 (Cadmium (as Cd), mg/l, Max)	-
TABLE 3 sl no 3 (Lead (as Pb), mg/l, Max)	-
TABLE 3 sl no 4 (Mercury (as Hg), mg/l, Max)	-
TABLE 3 sl no 5 ( Molybdenum (as Mo), mg/l, Max)	-
TABLE 3 sl no 6 (Nickel (as Ni), mg/l, Max)	-
4.1 (Bacteriological Requirements)	-
4.3 (Biological Requirements)	-
TABLE 6 sl no 1 (All water intended for drinking: a) E. coli or thermotolerant coliform bacteri)	-
TABLE 6 sl no 3 (b) Total coliform bacteria)	-
TABLE 6 sl no 4 (Treated water in the distribution system: a) E. coli or thermotolerant coliform bacteria)	-

-
Test facility not available for following: 1. Cyanide 2.RAR

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

BIS, Western Regional Laboratory (WRL)

BUREAU OF INDIAN STANDARDS (WESTERN REGIONAL LABORATORY), PLOT NO. E9, ROAD NO. 8, M.I.D.C, ANDHERI (EAST), MUMBAI, MAHARASHTRA, INDIA, MUMBAI, Mumbai Suburban, Maharashtra, 400093

- wrol@bis.gov.in

Scope List