BIS - LIMS (Laboratory Information Management System)

BIS, Western Regional Laboratory (WRL)

BUREAU OF INDIAN STANDARDS (WESTERN REGIONAL LABORATORY), PLOT NO. E9, ROAD NO. 8, M.I.D.C, ANDHERI (EAST), MUMBAI, MAHARASHTRA, INDIA, MUMBAI, Mumbai Suburban, Maharashtra, 400093

- wrol@bis.gov.in

Scope List

Reset

66 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 9537 : Part 3 (1983)

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating meterials

Rs. 3300.00/, Rs. 2850.00/ View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Marking)	-
6.2 (Durability of Marking as per 6.4 of IS: 9537 (Part 1)-1980)	-
6.3 (Standard Mark on Conduit)	-
7.1.1 (Maximum and minimum outside diameter of socket)	-
7.1.1 Table-2 (Length of Socket end)	-
7.1.2 (Maximum and minimum outside diameter of conduit)	-
7.2 (Minimum inside diameter of conduit)	-
7.3 (Length of conduit)	-
7.4 (Unifomity of The wall Thickness)	-
8.1 (Construction as per clause 8 of IS: 9537 (Part 1)-1980)	-
9.2 (Bending Test i) At Room Temp ii) At Low Temp (-5 ±2°C))	-
9.3 (Compression Test as per caluse 9.3 of IS: 9537 (Part 1)-1980)	-
9.4 (Impact Test as per clause 9.4 of IS: 9537 (Part 1)-1980)	-
9.5 (Collapse Test as per clause 9.5 of IS: 9537 (Part 1)-1980)	-
10 (Resistance to Heat -Ball presure test)	-
11 (Resistance to burning as per clause 11 of IS: 9537 (Part 1)-1980)	-
12 (Electrical Characteristics-Test for electric strength as per clause 12.1.1 of IS: 9537 (Part 1)-1980)	-
12 (Electrical Characteristics-Insulation resistance test as per clause 12.1.2 of IS: 9537 (Part 1)-1980)	-
9.3 (Compression Test (after removal of force) as per caluse 9.3.3 of IS: 9537 (Part 1)-1980)	-

-
Complete test facility is available

IS 8783 : Part 4 : Sec 1 (1995)

Winding wires for submersible motors - Specification: Part 4 specification for indmdual wires: Sec 1 HR PVC insulated wires (First Revision)

9300/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl.3.1 (Conductor)	-
Cl.4 (Material)	-
Cl.5.1.1 (Dimensions)	-
Cl. 6 (Annealing Test)	-
Cl 6 (Resistance Test)	-
Cl 4.1.2 (Visual examination)	-
Cl.3.2 (Dielectric Material )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Volume resistivity)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Volume resistivity)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Tensile strength )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Elongation)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Tensile Strength)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Variation)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Elongation at Break )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Variation)	-
Cl. 4 Table 1of IS: 8783 (part 2) (Shrinkage test )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Shrinkage test )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Water absorption (Gravimetric) )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Hot deformation Test )	-
Cl. 4 Table 1of IS: 8783 (part 2) (Heat shock Test )	-
Cl.4.1 (Insulation )	-
Cl.4.2 (Application)	-
Cl.4.3 (Colour)	-
Cl.4.4 (Overall Diameter)	-
Cl.4.5 (Finish)	-
Cl.4.6 (High Voltage Test Water Immersion )	-

-
-

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

Rs 825/- upto 7 wires, Rs 1425/- upto 19 wires View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6.1 (Freedom from Defects)	-
7.1 Table-1 (Dimensional measurement of wires)	-
7.2.2 Table-2, Table-4 (Calculated resistance of Stranded Conductor)	-
8.1 (Joints in wires-Conductors Containing Seven Wires)	-
8.2 (Joints in wires-Conductors Containing More Than Seven Wires)	-
9.2 Table 3 (Lay Ratio of stranded conductors)	-
9.3 (Direction of Lay)	-
9.4 (Multiple layers of wires)	-
11 (Packing and Marking)	-
12.2 Table 1 (Breaking Load Test- Before Stranding)	-
12.2 Table 1 (Breaking Load Test- After Stranding)	-
12.3 Table 1 (Elongation Test- Before Stranding)	-
12.3 Table 1 (Elongation Test- After Stranding)	-
12.4 Table 1 (Resistance of Aluminium wire)	-
7.2.1 (Sizes)	-
Cl. 7.2 (7.2.1, 7.2.2), Table 2 (Approx Mass)	-

-
Complete Test facility available

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

Rs.1600/- for 7 strands, Rs.3750/- for 19 strands View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
6 (Freedom from defects)	-
9.3 (Stranding)	-
12.6, Table 3 (Measurement of lay ratio)	-
12.5, Table 1 (Resistance test)	-
12.4 (Wrapping test)	-
12.3, Table-1 (Breaking load after stranding)	-
12.3, Table-1 (Breaking load before stranding)	-
12.2, Table-1 (Measurement of diameter of individual aluminium wire)	-
7.1.1 (Nominal Sizes)	-
7.2.1 (Sizes)	-
7.2.2 (Resistance)	-
8, 8.1, 8.2 (Joint in wires, except during stranding)	-
9.2 (Lay ratio)	-
9.4 (Multiple layer of wires)	-

-
Complete Test Facility

IS 371 (1999)

Ceiling roses - Specification (Third Revision)

6A, 250V

Rs 5700/- View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
9 (Marking)	-
10.1 (Dimentions)	-
10.2 (Dimentions)	-
11.1 (Accessibility of live parts )	-
11.2 (Accessibility of live parts )	-
11.3 (Accessibility of live parts )	-
11.4 (Accessibility of live parts )	-
11.4.1 (Accessibility of live parts )	-
12.1 (Provision for Earthing)	-
12.2 (Provision for Earthing)	-
13.1 (Terminals)	-
13.2 (Terminals)	-
13.3 (Terminals)	-
13.4 (Terminals)	-
13.5 (Terminals)	-
13.6 (Terminals)	-
13.7 (Terminals)	-
13.8.1 (Terminals)	-
13.8.2 (Terminals)	-
13.8.3 (Terminals)	-
14.1 (Construction)	-
14.2 (Construction)	-
14.3 (Construction)	-
14.4 (Construction)	-
15.1 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
15.2 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
15.3 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
15.4 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
15.5 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
15.7 (RESISTANCE TO MOISTURE AND HUMIDITY, INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-
16 (Temperature Rise Test)	-
17 (Temperature Rise Test)	-
18 (Resistance to heat)	-
19 (Resistance to abnormal heat fire and tracking)	-
19.2 (Resistance to abnormal heat fire and tracking)	-
20.1 (SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-
20.2 (SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-
20.3 (SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-
21.1 (CREEPAGE DISTANCE AND CLEARANCES)	-
22.1 (Resistance to Excessive residual Stress and to Rusting )	-
22.1 (Resistance to Excessive residual Stress and to Rusting )	-
22.1 (Resistance to Excessive residual Stress and to Rusting )	-

-
-

IS 2124 (2000)

Sodium bicarbonate - Specification (Second Revision)

Rs 4660/- for Pure Grade View breakup
Rs 8210/- for Analytical Reagent Grade Rs 4360/- for Refined Grade

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
3.1 (Grade)	-
4.1 (Description)	-
4.2 (Table 1 S.no.(i)) (Total Alkalinity (as NaHCO3))	-
4.2 (Table 1 S.no.(i)) (pH )	-
4.2 (Table 1 S.no.(ii)) (Chlorides (as Cl))	-
4.2 (Table 1 S.no.(iii)) (Insoluble matter)	-
4.2 (Table 1 S.no.(iv)) (Sulphates (as SO4))	-
4.2 (Table 1 S.no.(v)) (Iron (as Fe))	-
4.2 (Table 1 S.no.(vii)) (Arsenic (as As))	-
4.2 (Table 1 S.no.(viii)) (Ammonium compounds (as NH4))	-
4.2 (Table 1 S.no.(ix)) (Phosphates (as PO4))	-
4.2 (Table 1 S.no.(x)) (Calcium and magnesium (as Ca))	-
4.2 (Table 1 S.no.(xi)) (Copper (as Cu))	-
4.2 (Table 1 S.no.(xii)) (Nitrates (as NO3))	-
4.2 (Table 1 S.no.(xiii)) (Silicates (as SiOz))	-
4.2 (Table 1 S.no.(xiv)) (Potassium (as K))	-
4.2 (Table 1 S.no.(xv)) (Substances reducing iodine)	-

-
-

Bureau of Indian Standards

The National Standards Body of India

BIS, Western Regional Laboratory (WRL)

BUREAU OF INDIAN STANDARDS (WESTERN REGIONAL LABORATORY), PLOT NO. E9, ROAD NO. 8, M.I.D.C, ANDHERI (EAST), MUMBAI, MAHARASHTRA, INDIA, MUMBAI, Mumbai Suburban, Maharashtra, 400093

- wrol@bis.gov.in

Scope List