BIS - LIMS (Laboratory Information Management System)

Star Wire (India) Laboratories Private Ltd., Ballabhgarh

21/4, Mathura Road, ballabgarh, Faridabad, Haryana, 121004

8376900345 swdc06@starwire.in

Scope List

Reset

7 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	5000	-
6(Hazardous radiations)	-	10000	-
7(Heating under normal operating conditions)	-	10000	-
8(Constructional requirements with regard to the protection against electric shock)	-	10000	-
9(Electric shock hazard under normal operating conditions)	-	5000	-
10(Insulation requirements)	-	10000	-
11(Fault conditions)	-	15000	-
12(Mechanical strength)	-	20000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	10000	-
14(Components)	-	10000	-
15(TERMINALS)	-	10000	-
16(External flexible cords)	-	5000	-
17(Electrical connections and mechanical fixings)	-	5000	-
19(Stability and mechanical hazards)	-	10000	-
20(Resistance to fire)	-	10000	-

17 Sep, 2027

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

62500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	1000	Nil
1.6(Power interface .)	-	2000	Nil
1.7(Markings and instructions)	-	1000	Nil
2.1(Protection from electric shock and energy hazards)	-	2000	Nil
2.2(SELV circuits)	-	2000	Nil
2.3(TNV circuits)	-	1000	Nil
2.4(Limited current circuits)	-	2000	Nil
2.5(Limited power sources .)	-	2000	Nil
2.6(Provisions for earthing and bonding)	-	2000	Nil
2.7(Overcurrent and earth fault protection in primary circuits)	-	2000	Nil
2.8(Safety interlocks)	-	500	Nil
2.9(Electrical insulation)	-	2000	Nil
2.10(Clearances, creepage distances and distances through insulation)	-	2000	Nil
3.1(General)	-	1000	Nil
3.2(Connection to a mains supply)	-	2000	Nil
3.3(Wiring terminals for connection of external conductors)	-	1500	Nil
3.4(Disconnection from the mains supply)	-	1000	Nil
3.5(Interconnection of equipment)	-	1000	Nil
4.1(Stability)	-	2000	Nil
4.2(Mechanical strength)	-	2000	Nil
4.3(Design and construction)	-	5000	Nil
4.4(Protection against hazardous moving parts)	-	1500	Nil
4.5(Thermal requirements)	-	2500	Nil
4.6(Openings in enclosures)	-	2000	Nil
4.7(Resistance to fire)	-	2000	Nil
5.1(Touch current and protective conductor curren)	-	2000	Nil
5.2(Electric strength)	-	2000	Nil
5.3(Abnormal operating and fault conditions)	-	2000	Nil
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	2000	Nil
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	2000	Nil
6.3(Protection of the telecommunication wiring system from overheating)	-	1000	Nil
7.1(General)	-	1000	Nil
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	2000	Nil
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	2000	Nil
7.4(Insulation between primary circuits and cable distribution systems)	-	2000	Nil
1.5(Components)	-	-	-
1.6(Power interface .)	-	-	-
1.7(Markings and instructions)	-	-	-
2.1(Protection from electric shock and energy hazards)	-	-	-
2.2(SELV circuits)	-	-	-
2.3(TNV circuits)	-	-	-
2.4(Limited current circuits)	-	-	-
2.5(Limited power sources .)	-	-	-
2.6(Provisions for earthing and bonding)	-	-	-
2.7(Overcurrent and earth fault protection in primary circuits)	-	-	-
2.8(Safety interlocks)	-	-	-
2.9(Electrical insulation)	-	-	-
2.10(Clearances, creepage distances and distances through insulation)	-	-	-
3.1(General)	-	-	-
3.2(Connection to a mains supply)	-	-	-
3.3(Wiring terminals for connection of external conductors)	-	-	-
3.4(Disconnection from the mains supply)	-	-	-
3.5(Interconnection of equipment)	-	-	-
4.1(Stability)	-	-	-
4.2(Mechanical strength)	-	-	-
4.3(Design and construction)	-	-	-
4.4(Protection against hazardous moving parts)	-	-	-
4.5(Thermal requirements)	-	-	-
4.6(Openings in enclosures)	-	-	-
4.7(Resistance to fire)	-	-	-
5.1(Touch current and protective conductor curren)	-	-	-
5.2(Electric strength)	-	-	-
5.3(Abnormal operating and fault conditions)	-	-	-
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	-	-
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	-	-
6.3(Protection of the telecommunication wiring system from overheating)	-	-	-
7.1(General)	-	-	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	-	-
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	-	-
7.4(Insulation between primary circuits and cable distribution systems)	-	-	-

17 Sep, 2027

-
Excluding the following tests : Components (Cl.1.5), Moving Parts (Cl.2.8.5), Switches & relays (Cl.2.8.7), Semiconductor devices (Cl.2.10.5.4), AC power supply cords (Cl.3.2.5.1), Cathode ray tubes (Cl.4.2.8), Batteries (Cl.4.3.8), Ionizing radiation test (Cl.4.3.13.2), Effect of UV on materials (Cl.4.3.13.3), Human exposure to UV radiation (Cl.4.3.13.4), Effect of lasers (including LED) (Cl.4.3.13.5), Insulating winding wires (Annex U), Household and home/office document/media shredders (Annex-EE) and Evaluation of IC current limiters (Annex CC).

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	5000	-
6(Hazardous radiations)	-	10000	-
7(Heating under normal operating conditions)	-	10000	-
8(Constructional requirements with regard to the protection against electric shock)	-	10000	-
9(Electric shock hazard under normal operating conditions)	-	5000	-
10(Insulation requirements)	-	10000	-
11(Fault conditions)	-	15000	-
12(Mechanical strength)	-	20000	-
13(CLEARANCES and CREEPAGE DISTANCES)	-	10000	-
14(Components)	-	10000	-
15(TERMINALS)	-	10000	-
16(External flexible cords)	-	5000	-
17(Electrical connections and mechanical fixings)	-	5000	-
19(Stability and mechanical hazards)	-	10000	-
20(Resistance to fire)	-	10000	-

17 Sep, 2027

-
Excluding the following tests: Ionizing radiation (Cl.6.1), Laser radiation (Cl.6.2), Requirements for insulated winding wires for use without additional interleaved insulation (Cl.8.16), Endurance test for wound components with insulated winding wires without additional interleaved insulation (Cl.8.17), Printed Boards(Cl.13.5), Component (Cl.14), Mechanical strength of picture tubes & protection against the effect of implosion (Cl.18).

IS 16046 : Part 1 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )

62500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	5000	Nil
5(General Safety Considerations)	-	1000	Nil
5.1(General)	-	1000	Nil
5.2(Insulation and Wiring)	-	1000	Nil
5.3(Venting)	-	1000	Nil
5.4(Temperature, Voltage and Current Management)	-	1000	Nil
5.5(Terminal Contacts)	-	1000	Nil
5.6(Assembly of Cells into batteries)	-	1000	Nil
5.7(Quality Plan)	-	1000	Nil
6(Tyoe Test amd Sample Size)	-	2000	Nil
7(Specific requirements and tests)	-	2000	Nil
7.1(Charging procedure for test purposes)	-	1000	Nil
7.2(Intended Use)	-	5000	Nil
7.3(Reasonably foreseeable misuse)	-	30000	Nil
8(Information for safety)	-	1000	Nil
8.1(General)	-	1000	Nil
8.2(Small Cell and battery safety information)	-	1500	Nil
9(Marking)	-	1000	Nil
9.1(Cell Marking)	-	1000	Nil
9.2(Battery Marking)	-	1000	Nil
9.3(Caution for ingestion of small cells and batteries)	-	1000	Nil
9.4(Other information)	-	1000	Nil
10(Packaging)	-	1000	Nil

17 Sep, 2027

-
-

IS 16046 : Part 2 (2018)

62500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	5000	Nil
5(General Safety Considerations)	-	1000	Nil
5.1(General)	-	1000	Nil
5.2(Insulation and Wiring)	-	1000	Nil
5.3(Venting)	-	1000	Nil
5.4(Temperature, Voltage and Current Management)	-	1000	Nil
5.5(Terminal Contacts)	-	1000	Nil
5.6(Assembly of Cells into batteries)	-	1000	Nil
5.7(Quality Plan)	-	1000	Nil
5.8(Battery Safety Components)	-	1000	Nil
6(Type Test and Sample Size)	-	2000	Nil
7(Specific requirements and tests)	-	1000	Nil
7.1(Charging procedure for test purposes)	-	1000	Nil
7.2(Intended Use)	-	5000	Nil
7.3(Reasonably foreseeable misuse)	-	30000	Nil
8(Information for safety)	-	1000	Nil
8.1(General)	-	1000	Nil
8.2(Small Cell and battery safety information)	-	1500	Nil
9(Marking)	-	1000	Nil
9.1(Cell Marking)	-	1000	Nil
9.2(Battery Marking)	-	1000	Nil
9.3(Caution for ingestion of small cells and batteries)	-	1000	Nil
9.4(Other information)	-	1000	Nil
10(Packaging)	-	1000	Nil

17 Sep, 2027

-
Exclusion : Clause 7.3.1 of IS 16047: Part 3

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

52500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	Nil
8(Protection against accidental contact with live parts)	-	5000	Nil
10(PROVISION FOR EARTHING)	-	3000	Nil
11(MOISTURE RESISTANCE)	-	5000	Nil
12(Electric Strength)	-	5000	Nil
13(Thermal endurance test for winding of ballasts)	-	5000	Nil
14(Fault conditions)	-	8000	Nil
15(Transformer heating)	-	5000	Nil
16(Construction)	-	5000	Nil
17(Creepage distance and clearances)	-	3000	Nil
18(Screws, current carrying parts and connections)	-	5000	Nil
19(Resistance to heat, fire and tracking)	-	5000	Nil
20(Resistance to corrosion)	-	3000	Nil
9(Terminals)	-	5000	Nil

17 Sep, 2027

-
Excluding: Testing of Components Enclosure, Bridging resistor in primary circuit, Capacitor and RC units, RF suppression (X-Y capacitors), Inductor, MOV/VDR, SMPS/Mains Transformer, PCB material, Metal base PCB for LED, Transparent cover, Bobbin, Insulated tape, Heat shrinkage sleeve, Connector, Fuse, Internal wire, LED, Optocoupler, EMI/EMC filter, Winding wire, Thin sheet materials etc.

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

49500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	2000	NIL
6(Interchangeability)	-	5000	NIL
7(Protection against accidental contact with live parts)	-	5000	NIL
8(Insulation Resistance and Electric Strength)	-	5000	NIL
9(MECHANICAL STRENGTH)	-	5000	NIL
10(cap temperature)	-	8000	NIL
11(Resistance to Heat)	-	5000	NIL
12(Resistance to Flame and Ignition)	-	8000	NIL
13(Fault conditions)	-	6000	NIL
14(Creepage distance and clearances)	-	3000	NIL

17 Sep, 2027

-
Restricted to Cap type B22d, E14 & E27 only.

Bureau of Indian Standards

The National Standards Body of India

Star Wire (India) Laboratories Private Ltd., Ballabhgarh

21/4, Mathura Road, ballabgarh, Faridabad, Haryana, 121004

8376900345 swdc06@starwire.in

Scope List