BIS - LIMS (Laboratory Information Management System)

GIGA LABS

BEARYS GLOBAL RESEARCH CENTRE, 63/3B, GORVIGERE VILLAGE, BIDARAHALLI HOBLI, BENGALURU, BENGALURU, Bengaluru Rural, Karnataka, 560067

9585514478 vinay.pai@se.com

Scope List

Reset

7 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS/IEC 60947 : Part 5 : Sec 1 (2016)

Low-Voltage Switchgear And Control Gear : Part 5-1 Control Circuit Devices And Switching Elements Electromechanical Control Circuit Devices

128000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1(Marking : General ")	-	2000	-
5.2.2(Terminal identification and marking)	-	2000	-
5.2.3(Functional markings)	-	2000	-
5.2.4(Emergency stop)	-	2000	-
5.2.5(Operating diagram)	-	2000	-
5.2.5.1(Position indication)	-	2000	-
5.2.5.2(Terminal markings for operating diagrams)	-	2000	-
5.2.6(Time delay markings)	-	2000	-
5.3(Instructions for installation, operation and maintenance)	-	2000	-
7.1.2.2(Glow-wire testing)	-	2000	-
7.1.3(Current-carrying parts and their connections)	-	2000	-
7.1.4(Clearances and creepage distances)	-	2000	-
7.2.4.1(Making and breaking capacities)	-	5000	-
7.2.4.3(Durability)	-	5000	-
7.3.2.4(Electrostatic discharges)	-	18000	-
7.3.2.6(Electrical fast transients/bursts)	-	18000	-
7.3.2.7(Surges)	-	5000	-
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	10000	-
7.3.2.9(Power-frequency magnetic fields)	-	10000	-
7.3.3(Emission)	-	10000	-
7.2.3(Dielectric properties)	-	5000	-
8.1.5(Special tests)	-	10000	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	10000	-
8.2.1.1.1(Glow-wire test)	-	20000	-
8.2.3(Enclosures for equipment)	-	2000	-
8.2.4(Mechanical and electrical properties of terminals)	-	2000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	2000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	2000	-
8.2.4.4(Pull-out test)	-	2000	-
8.2.7(Conduit pull-out test, torque test, and bending test with metallic conduits)	-	2000	-
8.3.3.3(Temperature rise)	-	25000	-
8.3.3.4(Dielectric properties)	-	15000	-
8.3.3.2(Operating limits of contactor relays)	-	5000	-
8.3.3.5(Making and breaking capacities)	-	5000	-
8.3.3.5.2(Test circuits and connections)	-	5000	-
8.3.4.3(Test circuit and test quantities)	-	5000	-
8.3.4.1(General conditions for short-circuit tests)	-	5000	-
8.3.4.4 b)(Condition of the switching element after the test)	-	5000	-
8.3.4.4 a)(Condition of the switching element after the test)	-	5000	-
8.4.2.4(Surges)	-	5000	-
8.3.1(Degree of protection of enclosed control circuit devices)	-	5000	-
C.2(Mechanical durability)	-	10000	-
C.1.2(Observation)	-	5000	-
G.8.2.2(Pull-out test)	-	5000	-
H.8.7("Verification of electromagnetic compatibility")	-	5000	-
H.8.6("Performance under short circuit current conditions")	-	10000	-
H.8.5("Making and breaking capacities")	-	5000	-
H.8.4(OFF-state current)	-	5000	-
H.8.2(Voltage drop test)	-	10000	-
J.8.5("Degree of protection for indicating towers")	-	5000	-
J.8.4.3(Indirect support mounting)	-	5000	-
J.8.4.2.3(Vibration)	-	10000	-
J.8.4.2.2(Shock)	-	5000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	10000	-
J.8.3.3.3(Temp-rise tests)	-	18000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	10000	-
J.8.3.3.4(Dielectric test)	-	10000	-
J.7.1.12(Indicator lights with built-in transformers)	-	10000	-
J.7("Constructional requirements")	-	10000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	10000	-
K 8.3.7(Verification of robustness of the actuating system)	-	10000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	10000	-
K.8.3.6(Verification of direct opening action)	-	10000	-
L.8.4(Special test for mechanically linked contact elements)	-	10000	-
N.3(Method based on durability test results)	-	10000	-
L.8.4(Special test for mechanically linked contact elements)	-	10000	-
K.8.3.6(Verification of direct opening action)	-	10000	-
5.2.1(" Marking : General ")	-	10000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	10000	-
K 8.3.7(Verification of robustness of the actuating system)	-	10000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	10000	-
5.2.2(Terminal identification and marking)	-	10000	-
J.7("Constructional requirements")	-	10000	-
5.2.3(Functional markings)	-	10000	-
J.7.1.12(Indicator lights with built-in transformers)	-	10000	-
J.8.3.3.4(Dielectric test)	-	10000	-
5.2.4(Emergency stop)	-	10000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	10000	-
J.8.3.3.3(Temp-rise tests)	-	25000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	15000	-
5.2.5(Operating diagram)	-	5000	-
J.8.4.2.2(Shock)	-	5000	-
5.2.5.1(Position indication)	-	5000	-
J.8.4.2.3(Vibration)	-	5000	-
J.8.4.3(Indirect support mounting)	-	5000	-
5.2.5.2(Terminal markings for operating diagrams)	-	5000	-
J.8.5("Degree of protection for indicating towers")	-	5000	-
5.2.6(Time delay markings)	-	5000	-
H.8.2(Voltage drop test)	-	5000	-
5.3(Instructions for installation, operation and maintenance)	-	5000	-
H.8.4(OFF-state current)	-	5000	-
H.8.5("Making and breaking capacities")	-	5000	-
7.1.2.2(Glow-wire testing)	-	5000	-
H.8.6("Performance under short circuit current conditions")	-	5000	-
7.1.3(Current-carrying parts and their connections)	-	5000	-
H.8.7("Verification of electromagnetic compatibility")	-	5000	-
G.8.2.2(Pull-out test)	-	5000	-
7.1.4(Clearances and creepage distances)	-	5000	-
G.8.2.3(Torque test)	-	5000	-
7.2.4.1(Making and breaking capacities)	-	5000	-
7.2.4.1(Making and breaking capacities)	-	5000	-
G.8.2.4(Push test)	-	5000	-
G.8.2.5(Bend test)	-	5000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	5000	-
7.2.4.3(Durability)	-	5000	-
F.8.1.2.4(Impact test)	-	5000	-
7.3.2.4(Electrostatic discharges)	-	5000	-
F.8.1.2.5(Damp heat, cyclic)	-	5000	-
F.8.1.2.3("Rapid change of temperature test")	-	5000	-
7.3.2.6(Electrical fast transients/bursts)	-	5000	-
F 8.1.2.4(Impact test)	-	5000	-
F 8.1.2.6("Dielectric test after stresses")	-	5000	-
C.1.2(Observation)	-	5000	-
7.3.2.7(Surges)	-	5000	-
C.2(Mechanical durability)	-	5000	-
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	5000	-
C.3(Electrical durability)	-	5000	-
7.3.2.9(Power-frequency magnetic fields)	-	5000	-
8.3.1(Degree of protection of enclosed control circuit devices)	-	5000	-
8.4.2.4(Surges)	-	5000	-
7.3.2.10(Voltage dips and interruptions)	-	5000	-
8.3.4.4 a)(Condition of the switching element after the test)	-	5000	-
8.3.4.4 b)(Condition of the switching element after the test)	-	10000	-
7.3.2.11(Harmonics in the supply)	-	10000	-
8.3.4.1(General conditions for short-circuit tests)	-	15000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	15000	-
8.3.4.3(Test circuit and test quantities)	-	5000	-
7.3.3(Emission)	-	5000	-
8.3.3.5.2(Test circuits and connections)	-	5000	-
8.3.3.5(Making and breaking capacities)	-	5000	-
8.3.3.2(Operating limits of contactor relays)	-	5000	-
7.2.3(Dielectric properties)	-	5000	-
8.3.3.4(Dielectric properties)	-	5000	-
8.3.3.3(Temperature rise)	-	25000	-
8.1.5(Special tests)	-	15000	-
8.2.5(Verification of actuating force (or moment))	-	5000	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	5000	-
8.2.1.1.1(Glow-wire test)	-	5000	-
8.2.4.4(Pull-out test)	-	5000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	5000	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	5000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	5000	-
8.2.4(Mechanical and electrical properties of terminals)	-	5000	-
8.2.3(Enclosures for equipment)	-	5000	-
7.3.2.5(Radiated radio-frequency electromagnetic fields)	-	5000	-
7.3.2.10(Voltage dips and interruptions)	-	5000	-
7.3.2.11(Harmonics in the supply)	-	5000	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	5000	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	5000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	5000	-
F 8.1.2.6("Dielectric test after stresses")	-	5000	-
F.8.1.2.4(Impact test)	-	5000	-
F.8.1.2.3("Rapid change of temperature test")	-	5000	-
F.8.1.2.5(Damp heat, cyclic)	-	10000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	10000	-
G.8.2.5(Bend test)	-	5000	-
G.8.2.4(Push test)	-	5000	-
G.8.2.3(Torque test)	-	5000	-
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	5000	-
F 8.1.2.4(Impact test)	-	5000	-
8.2.7(Conduit pull-out test, torque test and bending test with metallic conduits)	-	5000	-
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	5000	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	5000	-

Complete

08 Apr, 2024

08 Apr, 2027

Included w.e.f. 06.09.2024 Exclusion:Cl.8.2.5 (Verification of actuating force (or moment)), Cl.8.2.6 (Verification of limitation of rotation (of a rotary switch)), Cl.C.3 (Electrical durability)

IS/IEC 60947 : Part 4 : Sec 1 (2018)

Low-Voltage switchgear and controlgear : Part 4-1 Contactors and motor starters electromechanical contactors and motor-Starters

800000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.2(Materials)	-	10000	-
8.1.2.1(General materials requirements)	-	10000	-
8.1.2.2(Glow wire testing)	-	10000	-
8.1.2.3(Test based on flammability category)	-	10000	-
8.1.3(Current-carrying parts and their connections)	-	10000	-
8.1.4(Clearances and creepage distances)	-	10000	-
8.1.5.1(Insulation)	-	10000	-
8.1.5.2(Direction of movement)	-	10000	-
8.1.5.3(Mounting)	-	10000	-
8.1.5.4(Protection)	-	10000	-
8.1.8(Terminals)	-	10000	-
8.1.8.1(General)	-	10000	-
8.1.8.2(Terminal identification and marking)	-	10000	-
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	10000	-
8.1.10(Provisions for protective earthing)	-	10000	-
8.1.11(Enclosures for equipment)	-	10000	-
8.1.11.1(Design)	-	10000	-
8.1.11.2(Insulation)	-	10000	-
8.1.12(Degrees of protection of enclosed equipment)	-	10000	-
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	10000	-
8.1.14.1(General)	-	10000	-
8.2(Performance requirements)	-	10000	-
8.2.1(Operating conditions)	-	10000	-
8.2.1.1.1(General conditions)	-	10000	-
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	10000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	10000	-
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	10000	-
8.2.1.5(Limits of operation of current sensing relays and releases)	-	10000	-
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	10000	-
8.2.1.5.1.2(Thermal memory test verification)	-	10000	-
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	10000	-
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	10000	-
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	10000	-
8.2.1.5.4.1(Limits of operation of under-current relays)	-	10000	-
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	10000	-
8.2.2(Temperature-rise)	-	10000	-
8.2.2.3(Accessible parts)	-	10000	-
8.2.2.4(Ambient air temperature)	-	10000	-
8.2.2.5(Main circuit)	-	10000	-
8.2.2.6(Control circuits)	-	10000	-
8.2.3(Dielectric properties)	-	10000	-
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	10000	-
8.2.3.2(Voltage limiting components between circuits)	-	10000	-
8.2.4.3.1(Mechanical durability)	-	10000	-
8.2.4.3.2(Electrical durability)	-	10000	-
8.2.4.4(Overload current withstand capability of contactors)	-	10000	-
8.2.4.5(Coil power consumption)	-	10000	-
8.2.4.6(Pole impedance)	-	10000	-
8.3(Electromagnetic compatibility (EMC))	-	10000	-
8.3.2(Immunity)	-	10000	-
8.3.3(Emission)	-	10000	-
9.1.5.2(Environment tests)	-	10000	-
9.2.2(Electrical performance of screwless-type clamping units)	-	10000	-
9.2.3(Ageing test for screwless-type clamping unit)	-	10000	-
9.3.3.2(Operating limits)	-	10000	-
9.3.3.2.1.2(Coil power consumption)	-	10000	-
9.3.3.2.1.3(Pole impedance)	-	10000	-
9.3.3.2.2(Relays and releases)	-	10000	-
9.3.3.3.1(Ambient air temperature)	-	10000	-
9.3.3.3.2(Measurement of the temperature of parts)	-	10000	-
9.3.3.3.3(Temperature-rise of a part)	-	10000	-
9.3.3.3.4(Temperature-rise of the main circuit)	-	10000	-
9.3.3.3.5(Temperature-rise of control circuits)	-	10000	-
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	10000	-
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	10000	-
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	10000	-
9.3.3.6(Operational performance capability)	-	10000	-
9.3.4.2.2(prospective current)	-	10000	-
9.3.5(Overload current withstand capability of contactors)	-	10000	-
9.3.6.2(Operation and operating limits)	-	10000	-
9.3.6.3(Dielectric tests)	-	10000	-
9.3.6.4(Mechanical operation tests of a MPSD)	-	10000	-
9.4.2(Immunity)	-	10000	-
9.4.2.2(Electrostatic discharge)	-	10000	-
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	10000	-
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	10000	-
9.4.2.5(Electrical fast transient/bursts)	-	10000	-
9.4.2.6(Surges)	-	10000	-
9.4.2.7(Power frequency magnetic field)	-	10000	-
9.4.3(Emission)	-	10000	-
F.7.2(Tests on products in a new condition)	-	10000	-
F.7.3(Test after conventional operational performance)	-	10000	-
H.3(Limits of operation of control functions)	-	10000	-
H.4(Test of the control functions)	-	10000	-
M.8.3(Electromagnetic compatibility (EMC))	-	10000	-
M.9.4(Thermal cycling test)	-	10000	-
M.9.8(Mechanical properties)	-	10000	-
M.9.9(Degree of protection of enclosed contactors)	-	10000	-
M.9.11(Clearance and creepage distances)	-	10000	-
P.2.3(Verification of operational performance capability)	-	10000	-
Q.5.3(Selectivity determined by test)	-	10000	-
8.1.14(Limited energy source)	-	10000	-
8.1.14.2(Limited energy source with galvanic separation)	-	10000	-
8.1.14.3(Limited energy source with current limiting impedance)	-	10000	-
8.1.15(Stored charge energy circuit)	-	10000	-
8.1.16(Fault and abnormal conditions)	-	10000	-
8.1.17(Short-circuit and overload protection of ports)	-	10000	-
8.2.1.5.1.1(General tripping requirements of overload relays)	-	10000	-
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	10000	-
8.2.5.1(Performance under short-circuit conditions)	-	10000	-
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	10000	-
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	10000	-
9.2.4(Limited energy source test)	-	10000	-
9.2.5(Breakdown of components)	-	10000	-
9.2.5.2(Breakdown of components test)	-	10000	-
9.4.2.9(Harmonics in the supply)	-	10000	-
M.9.5(Climatic test)	-	10000	-
N.3.2(Touch current measurement)	-	10000	-
P.2.4.2(Test voltage)	-	10000	-
P.2.4.3(Application of the test voltage)	-	10000	-
P.4(Test of MPSD for IT system)	-	10000	-
8.1.2(Materials)	-	5000	-
8.1.2.1(General materials requirements)	-	5000	-
8.1.2.2(Glow wire testing)	-	20000	-
8.1.2.3(Test based on flammability category)	-	10000	-
8.1.3(Current-carrying parts and their connections)	-	10000	-
8.1.4(Clearances and creepage distances)	-	10000	-
8.1.5.1(Insulation)	-	10000	-
8.1.5.2(Direction of movement)	-	10000	-
8.1.5.3(Mounting)	-	10000	-
8.1.5.4(Protection)	-	10000	-
8.1.8(Terminals)	-	10000	-
8.1.8.1(General)	-	10000	-
8.1.8.2(Terminal identification and marking)	-	10000	-
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	10000	-
8.1.10(Provisions for protective earthing)	-	10000	-
8.1.11(Enclosures for equipment)	-	10000	-
8.1.11.1(Design)	-	10000	-
8.1.11.2(Insulation)	-	10000	-
8.1.12(Degrees of protection of enclosed equipment)	-	10000	-
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	10000	-
8.1.14.1(General)	-	10000	-
8.2(Performance requirements)	-	10000	-
8.2.1(Operating conditions)	-	10000	-
8.2.1.1.1(General conditions)	-	10000	-
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	10000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	10000	-
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	10000	-
8.2.1.5(Limits of operation of current sensing relays and releases)	-	10000	-
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	10000	-
8.2.1.5.1.2(Thermal memory test verification)	-	10000	-
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	10000	-
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	10000	-
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	10000	-
8.2.1.5.4.1(Limits of operation of under-current relays)	-	10000	-
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	10000	-
8.2.2(Temperature-rise)	-	10000	-
8.2.2.3(Accessible parts)	-	10000	-
8.2.2.4(Ambient air temperature)	-	10000	-
8.2.2.5(Main circuit)	-	10000	-
8.2.2.6(Control circuits)	-	10000	-
8.2.3(Dielectric properties)	-	10000	-
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	10000	-
8.2.3.2(Voltage limiting components between circuits)	-	10000	-
8.2.4.3.1(Mechanical durability)	-	10000	-
8.2.4.3.2(Electrical durability)	-	10000	-
8.2.4.4(Overload current withstand capability of contactors)	-	10000	-
8.2.4.5(Coil power consumption)	-	10000	-
8.2.4.6(Pole impedance)	-	10000	-
8.3(Electromagnetic compatibility (EMC))	-	10000	-
8.3.2(Immunity)	-	10000	-
8.3.3(Emission)	-	10000	-
9.1.5.2(Environment tests)	-	10000	-
9.2.2(Electrical performance of screwless-type clamping units)	-	10000	-
9.2.3(Ageing test for screwless-type clamping unit)	-	10000	-
9.3.3.2(Operating limits)	-	10000	-
9.3.3.2.1.2(Coil power consumption)	-	10000	-
9.3.3.2.1.3(Pole impedance)	-	10000	-
9.3.3.2.2(Relays and releases)	-	10000	-
9.3.3.3.1(Ambient air temperature)	-	10000	-
9.3.3.3.2(Measurement of the temperature of parts)	-	10000	-
9.3.3.3.3(Temperature-rise of a part)	-	10000	-
9.3.3.3.4(Temperature-rise of the main circuit)	-	10000	-
9.3.3.3.5(Temperature-rise of control circuits)	-	10000	-
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	10000	-
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	10000	-
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	10000	-
9.3.3.6(Operational performance capability)	-	10000	-
9.3.4.2.2(prospective current)	-	10000	-
9.3.5(Overload current withstand capability of contactors)	-	10000	-
9.3.6.2(Operation and operating limits)	-	10000	-
9.3.6.3(Dielectric tests)	-	10000	-
9.3.6.4(Mechanical operation tests of a MPSD)	-	10000	-
9.4.2(Immunity)	-	10000	-
9.4.2.2(Electrostatic discharge)	-	10000	-
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	10000	-
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	10000	-
9.4.2.5(Electrical fast transient/bursts)	-	10000	-
9.4.2.6(Surges)	-	10000	-
9.4.2.7(Power frequency magnetic field)	-	10000	-
9.4.3(Emission)	-	10000	-
F.7.2(Tests on products in a new condition)	-	10000	-
F.7.3(Test after conventional operational performance)	-	10000	-
H.3(Limits of operation of control functions)	-	10000	-
H.4(Test of the control functions)	-	10000	-
M.8.3(Electromagnetic compatibility (EMC))	-	10000	-
M.9.4(Thermal cycling test)	-	10000	-
M.9.8(Mechanical properties)	-	10000	-
M.9.9(Degree of protection of enclosed contactors)	-	10000	-
M.9.11(Clearance and creepage distances)	-	10000	-
P.2.3(Verification of operational performance capability)	-	10000	-
Q.5.3(Selectivity determined by test)	-	10000	-
8.1.14(Limited energy source)	-	10000	-
8.1.14.2(Limited energy source with galvanic separation)	-	10000	-
8.1.14.3(Limited energy source with current limiting impedance)	-	10000	-
8.1.15(Stored charge energy circuit)	-	10000	-
8.1.16(Fault and abnormal conditions)	-	10000	-
8.1.17(Short-circuit and overload protection of ports)	-	10000	-
8.2.1.5.1.1(General tripping requirements of overload relays)	-	10000	-
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	10000	-
8.2.5.1(Performance under short-circuit conditions)	-	10000	-
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	10000	-
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	10000	-
9.2.4(Limited energy source test)	-	10000	-
9.2.5(Breakdown of components)	-	10000	-
9.2.5.2(Breakdown of components test)	-	10000	-
9.4.2.9(Harmonics in the supply)	-	10000	-
M.9.5(Climatic test)	-	10000	-
N.3.2(Touch current measurement)	-	10000	-
P.2.4.2(Test voltage)	-	10000	-
P.2.4.3(Application of the test voltage)	-	10000	-
P.4(Test of MPSD for IT system)	-	10000	-
8.1.2(Materials)	-	10000	-
8.1.2.1(General materials requirements)	-	10000	-
8.1.2.2(Glow wire testing)	-	10000	-
8.1.2.3(Test based on flammability category)	-	10000	-
8.1.3(Current-carrying parts and their connections)	-	10000	-
8.1.4(Clearances and creepage distances)	-	10000	-
8.1.5.1(Insulation)	-	10000	-
8.1.5.2(Direction of movement)	-	10000	-
8.1.5.3(Mounting)	-	10000	-
8.1.5.4(Protection)	-	10000	-
8.1.8(Terminals)	-	10000	-
8.1.8.1(General)	-	10000	-
8.1.8.2(Terminal identification and marking)	-	10000	-
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	10000	-
8.1.10(Provisions for protective earthing)	-	10000	-
8.1.11(Enclosures for equipment)	-	10000	-
8.1.11.1(Design)	-	10000	-
8.1.11.2(Insulation)	-	10000	-
8.1.12(Degrees of protection of enclosed equipment)	-	10000	-
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	10000	-
8.1.14.1(General)	-	10000	-
8.2(Performance requirements)	-	10000	-
8.2.1(Operating conditions)	-	10000	-
8.2.1.1.1(General conditions)	-	10000	-
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	10000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	10000	-
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	10000	-
8.2.1.5(Limits of operation of current sensing relays and releases)	-	10000	-
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	10000	-
8.2.1.5.1.2(Thermal memory test verification)	-	10000	-
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	10000	-
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	10000	-
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	10000	-
8.2.1.5.4.1(Limits of operation of under-current relays)	-	10000	-
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	10000	-
8.2.2(Temperature-rise)	-	10000	-
8.2.2.3(Accessible parts)	-	10000	-
8.2.2.4(Ambient air temperature)	-	10000	-
8.2.2.5(Main circuit)	-	10000	-
8.2.2.6(Control circuits)	-	10000	-
8.2.3(Dielectric properties)	-	10000	-
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	10000	-
8.2.3.2(Voltage limiting components between circuits)	-	10000	-
8.2.4.3.1(Mechanical durability)	-	10000	-
8.2.4.3.2(Electrical durability)	-	10000	-
8.2.4.4(Overload current withstand capability of contactors)	-	10000	-
8.2.4.5(Coil power consumption)	-	10000	-
8.2.4.6(Pole impedance)	-	10000	-
8.3(Electromagnetic compatibility (EMC))	-	10000	-
8.3.2(Immunity)	-	10000	-
8.3.3(Emission)	-	10000	-
9.1.5.2(Environment tests)	-	10000	-
9.2.2(Electrical performance of screwless-type clamping units)	-	10000	-
9.2.3(Ageing test for screwless-type clamping unit)	-	10000	-
9.3.3.2(Operating limits)	-	10000	-
9.3.3.2.1.2(Coil power consumption)	-	10000	-
9.3.3.2.1.3(Pole impedance)	-	10000	-
9.3.3.2.2(Relays and releases)	-	10000	-
9.3.3.3.1(Ambient air temperature)	-	10000	-
9.3.3.3.2(Measurement of the temperature of parts)	-	10000	-
9.3.3.3.3(Temperature-rise of a part)	-	10000	-
9.3.3.3.4(Temperature-rise of the main circuit)	-	10000	-
9.3.3.3.5(Temperature-rise of control circuits)	-	10000	-
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	10000	-
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	10000	-
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	10000	-
9.3.3.6(Operational performance capability)	-	10000	-
9.3.4.2.2(prospective current)	-	10000	-
9.3.5(Overload current withstand capability of contactors)	-	10000	-
9.3.6.2(Operation and operating limits)	-	10000	-
9.3.6.3(Dielectric tests)	-	10000	-
9.3.6.4(Mechanical operation tests of a MPSD)	-	10000	-
9.4.2(Immunity)	-	10000	-
9.4.2.2(Electrostatic discharge)	-	10000	-
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	10000	-
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	10000	-
9.4.2.5(Electrical fast transient/bursts)	-	10000	-
9.4.2.6(Surges)	-	10000	-
9.4.2.7(Power frequency magnetic field)	-	10000	-
9.4.3(Emission)	-	10000	-
F.7.2(Tests on products in a new condition)	-	10000	-
F.7.3(Test after conventional operational performance)	-	10000	-
H.3(Limits of operation of control functions)	-	10000	-
H.4(Test of the control functions)	-	10000	-
M.8.3(Electromagnetic compatibility (EMC))	-	10000	-
M.9.4(Thermal cycling test)	-	10000	-
M.9.8(Mechanical properties)	-	10000	-
M.9.9(Degree of protection of enclosed contactors)	-	10000	-
M.9.11(Clearance and creepage distances)	-	10000	-
P.2.3(Verification of operational performance capability)	-	10000	-
Q.5.3(Selectivity determined by test)	-	10000	-
8.1.14(Limited energy source)	-	10000	-
8.1.14.2(Limited energy source with galvanic separation)	-	10000	-
8.1.14.3(Limited energy source with current limiting impedance)	-	10000	-
8.1.15(Stored charge energy circuit)	-	10000	-
8.1.16(Fault and abnormal conditions)	-	10000	-
8.1.17(Short-circuit and overload protection of ports)	-	10000	-
8.2.1.5.1.1(General tripping requirements of overload relays)	-	10000	-
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	10000	-
8.2.5.1(Performance under short-circuit conditions)	-	10000	-
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	10000	-
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	10000	-
9.2.4(Limited energy source test)	-	10000	-
9.2.5(Breakdown of components)	-	10000	-
9.2.5.2(Breakdown of components test)	-	10000	-
9.4.2.9(Harmonics in the supply)	-	10000	-
M.9.5(Climatic test)	-	10000	-
N.3.2(Touch current measurement)	-	10000	-
P.2.4.2(Test voltage)	-	10000	-
P.2.4.3(Application of the test voltage)	-	10000	-
P.4(Test of MPSD for IT system)	-	10000	-
8.1.2(Materials)	-	10000	-
8.1.2.1(General materials requirements)	-	10000	-
8.1.2.2(Glow wire testing)	-	10000	-
8.1.2.3(Test based on flammability category)	-	10000	-
8.1.3(Current-carrying parts and their connections)	-	10000	-
8.1.4(Clearances and creepage distances)	-	10000	-
8.1.5.1(Insulation)	-	10000	-
8.1.5.2(Direction of movement)	-	10000	-
8.1.5.3(Mounting)	-	10000	-
8.1.5.4(Protection)	-	10000	-
8.1.8(Terminals)	-	10000	-
8.1.8.1(General)	-	10000	-
8.1.8.2(Terminal identification and marking)	-	10000	-
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	10000	-
8.1.10(Provisions for protective earthing)	-	10000	-
8.1.11(Enclosures for equipment)	-	10000	-
8.1.11.1(Design)	-	10000	-
8.1.11.2(Insulation)	-	10000	-
8.1.12(Degrees of protection of enclosed equipment)	-	10000	-
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	10000	-
8.1.14.1(General)	-	10000	-
8.2(Performance requirements)	-	10000	-
8.2.1(Operating conditions)	-	10000	-
8.2.1.1.1(General conditions)	-	10000	-
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	10000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	10000	-
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	10000	-
8.2.1.5(Limits of operation of current sensing relays and releases)	-	10000	-
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	10000	-
8.2.1.5.1.2(Thermal memory test verification)	-	10000	-
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	10000	-
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	10000	-
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	10000	-
8.2.1.5.4.1(Limits of operation of under-current relays)	-	10000	-
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	10000	-
8.2.2(Temperature-rise)	-	10000	-
8.2.2.3(Accessible parts)	-	10000	-
8.2.2.4(Ambient air temperature)	-	10000	-
8.2.2.5(Main circuit)	-	10000	-
8.2.2.6(Control circuits)	-	10000	-
8.2.3(Dielectric properties)	-	10000	-
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	10000	-
8.2.3.2(Voltage limiting components between circuits)	-	10000	-
8.2.4.3.1(Mechanical durability)	-	10000	-
8.2.4.3.2(Electrical durability)	-	10000	-
8.2.4.4(Overload current withstand capability of contactors)	-	10000	-
8.2.4.5(Coil power consumption)	-	10000	-
8.2.4.6(Pole impedance)	-	10000	-
8.3(Electromagnetic compatibility (EMC))	-	10000	-
8.3.2(Immunity)	-	10000	-
8.3.3(Emission)	-	10000	-
9.1.5.2(Environment tests)	-	10000	-
9.2.2(Electrical performance of screwless-type clamping units)	-	10000	-
9.2.3(Ageing test for screwless-type clamping unit)	-	10000	-
9.3.3.2(Operating limits)	-	10000	-
9.3.3.2.1.2(Coil power consumption)	-	10000	-
9.3.3.2.1.3(Pole impedance)	-	10000	-
9.3.3.2.2(Relays and releases)	-	10000	-
9.3.3.3.1(Ambient air temperature)	-	10000	-
9.3.3.3.2(Measurement of the temperature of parts)	-	10000	-
9.3.3.3.3(Temperature-rise of a part)	-	10000	-
9.3.3.3.4(Temperature-rise of the main circuit)	-	10000	-
9.3.3.3.5(Temperature-rise of control circuits)	-	10000	-
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	10000	-
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	10000	-
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	10000	-
9.3.3.6(Operational performance capability)	-	10000	-
9.3.4.2.2(prospective current)	-	10000	-
9.3.5(Overload current withstand capability of contactors)	-	10000	-
9.3.6.2(Operation and operating limits)	-	10000	-
9.3.6.3(Dielectric tests)	-	10000	-
9.3.6.4(Mechanical operation tests of a MPSD)	-	10000	-
9.4.2(Immunity)	-	10000	-
9.4.2.2(Electrostatic discharge)	-	10000	-
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	10000	-
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	10000	-
9.4.2.5(Electrical fast transient/bursts)	-	10000	-
9.4.2.6(Surges)	-	10000	-
9.4.2.7(Power frequency magnetic field)	-	10000	-
9.4.3(Emission)	-	10000	-
F.7.2(Tests on products in a new condition)	-	10000	-
F.7.3(Test after conventional operational performance)	-	10000	-
H.3(Limits of operation of control functions)	-	10000	-
H.4(Test of the control functions)	-	10000	-
M.8.3(Electromagnetic compatibility (EMC))	-	10000	-
M.9.4(Thermal cycling test)	-	10000	-
M.9.8(Mechanical properties)	-	10000	-
M.9.9(Degree of protection of enclosed contactors)	-	10000	-
M.9.11(Clearance and creepage distances)	-	10000	-
P.2.3(Verification of operational performance capability)	-	10000	-
Q.5.3(Selectivity determined by test)	-	10000	-
8.1.14(Limited energy source)	-	10000	-
8.1.14.2(Limited energy source with galvanic separation)	-	10000	-
8.1.14.3(Limited energy source with current limiting impedance)	-	10000	-
8.1.15(Stored charge energy circuit)	-	10000	-
8.1.16(Fault and abnormal conditions)	-	10000	-
8.1.17(Short-circuit and overload protection of ports)	-	10000	-
8.2.1.5.1.1(General tripping requirements of overload relays)	-	10000	-
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	10000	-
8.2.5.1(Performance under short-circuit conditions)	-	10000	-
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	10000	-
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	10000	-
9.2.4(Limited energy source test)	-	10000	-
9.2.5(Breakdown of components)	-	10000	-
9.2.5.2(Breakdown of components test)	-	10000	-
9.4.2.9(Harmonics in the supply)	-	10000	-
M.9.5(Climatic test)	-	10000	-
N.3.2(Touch current measurement)	-	10000	-
P.2.4.2(Test voltage)	-	10000	-
P.2.4.3(Application of the test voltage)	-	10000	-
P.4(Test of MPSD for IT system)	-	10000	-
8.1.2(Materials)	-	1000	-
8.1.2.1(General materials requirements)	-	1000	-
8.1.2.2(Glow wire testing)	-	1000	-
8.1.2.3(Test based on flammability category)	-	1000	-
8.1.3(Current-carrying parts and their connections)	-	1000	-
8.1.4(Clearances and creepage distances)	-	1000	-
8.1.5.1(Insulation)	-	1000	-
8.1.5.2(Direction of movement)	-	1000	-
8.1.5.3(Mounting)	-	1000	-
8.1.5.4(Protection)	-	1000	-
8.1.8(Terminals)	-	1000	-
8.1.8.1(General)	-	1000	-
8.1.8.2(Terminal identification and marking)	-	1000	-
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	1000	-
8.1.10(Provisions for protective earthing)	-	1000	-
8.1.11(Enclosures for equipment)	-	1000	-
8.1.11.1(Design)	-	1000	-
8.1.11.2(Insulation)	-	1000	-
8.1.12(Degrees of protection of enclosed equipment)	-	1000	-
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	1000	-
8.1.14.1(General)	-	1000	-
8.2(Performance requirements)	-	1000	-
8.2.1(Operating conditions)	-	1000	-
8.2.1.1.1(General conditions)	-	1000	-
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	1000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	1000	-
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	1000	-
8.2.1.5(Limits of operation of current sensing relays and releases)	-	1000	-
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	1000	-
8.2.1.5.1.2(Thermal memory test verification)	-	1000	-
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	1000	-
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	1000	-
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	1000	-
8.2.1.5.4.1(Limits of operation of under-current relays)	-	1000	-
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	1000	-
8.2.2(Temperature-rise)	-	1000	-
8.2.2.3(Accessible parts)	-	1000	-
8.2.2.4(Ambient air temperature)	-	1000	-
8.2.2.5(Main circuit)	-	1000	-
8.2.2.6(Control circuits)	-	1000	-
8.2.3(Dielectric properties)	-	1000	-
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	1000	-
8.2.3.2(Voltage limiting components between circuits)	-	1000	-
8.2.4.3.1(Mechanical durability)	-	1000	-
8.2.4.3.2(Electrical durability)	-	1000	-
8.2.4.4(Overload current withstand capability of contactors)	-	1000	-
8.2.4.5(Coil power consumption)	-	1000	-
8.2.4.6(Pole impedance)	-	1000	-
8.3(Electromagnetic compatibility (EMC))	-	18000	-
8.3.2(Immunity)	-	5000	-
8.3.3(Emission)	-	5000	-
9.1.5.2(Environment tests)	-	4000	-
9.2.2(Electrical performance of screwless-type clamping units)	-	5000	-
9.2.3(Ageing test for screwless-type clamping unit)	-	5000	-
9.3.3.2(Operating limits)	-	1000	-
9.3.3.2.1.2(Coil power consumption)	-	1000	-
9.3.3.2.1.3(Pole impedance)	-	1000	-
9.3.3.2.2(Relays and releases)	-	1000	-
9.3.3.3.1(Ambient air temperature)	-	1000	-
9.3.3.3.2(Measurement of the temperature of parts)	-	1000	-
9.3.3.3.3(Temperature-rise of a part)	-	18000	-
9.3.3.3.4(Temperature-rise of the main circuit)	-	18000	-
9.3.3.3.5(Temperature-rise of control circuits)	-	18000	-
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	18000	-
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	18000	-
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	18000	-
9.3.3.6(Operational performance capability)	-	5000	-
9.3.4.2.2(prospective current)	-	5000	-
9.3.5(Overload current withstand capability of contactors)	-	5000	-
9.3.6.2(Operation and operating limits)	-	5000	-
9.3.6.3(Dielectric tests)	-	5000	-
9.3.6.4(Mechanical operation tests of a MPSD)	-	5000	-
9.4.2(Immunity)	-	5000	-
9.4.2.2(Electrostatic discharge)	-	5000	-
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	5000	-
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	6000	-
9.4.2.5(Electrical fast transient/bursts)	-	6000	-
9.4.2.6(Surges)	-	5000	-
9.4.2.7(Power frequency magnetic field)	-	5000	-
9.4.3(Emission)	-	5000	-
F.7.2(Tests on products in a new condition)	-	5000	-
F.7.3(Test after conventional operational performance)	-	5000	-
H.3(Limits of operation of control functions)	-	5000	-
H.4(Test of the control functions)	-	5000	-
M.8.3(Electromagnetic compatibility (EMC))	-	5000	-
M.9.4(Thermal cycling test)	-	5000	-
M.9.8(Mechanical properties)	-	5000	-
M.9.9(Degree of protection of enclosed contactors)	-	5000	-
M.9.11(Clearance and creepage distances)	-	5000	-
P.2.3(Verification of operational performance capability)	-	5000	-
Q.5.3(Selectivity determined by test)	-	5000	-
8.1.14(Limited energy source)	-	5000	-
8.1.14.2(Limited energy source with galvanic separation)	-	5000	-
8.1.14.3(Limited energy source with current limiting impedance)	-	5000	-
8.1.15(Stored charge energy circuit)	-	5000	-
8.1.16(Fault and abnormal conditions)	-	5000	-
8.1.17(Short-circuit and overload protection of ports)	-	5000	-
8.2.1.5.1.1(General tripping requirements of overload relays)	-	5000	-
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	5000	-
8.2.5.1(Performance under short-circuit conditions)	-	5000	-
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	5000	-
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	4000	-
9.2.4(Limited energy source test)	-	5000	-
9.2.5(Breakdown of components)	-	5000	-
9.2.5.2(Breakdown of components test)	-	5000	-
9.4.2.9(Harmonics in the supply)	-	5000	-
M.9.5(Climatic test)	-	5000	-
N.3.2(Touch current measurement)	-	5000	-
P.2.4.2(Test voltage)	-	5000	-
P.2.4.3(Application of the test voltage)	-	5000	-
P.4(Test of MPSD for IT system)	-	5000	-

Complete

08 Apr, 2024

08 Apr, 2027

Included w.e.f. 06.09.2024 Exclusion: Cl.9.3.3.3.8 (Temperature-rise of starting resistors for rheostatic rotor starters), Cl.9.3.4.2.3 (Test at the rated conditional short-circuit current Iq), Cl.8.2.5.1 (Performance under short-circuit conditions), Cl.8.2.5.3 (Co-ordination test between AC-3e rated starter and associated SCPD), Cl.9.4.2.8 (Voltage dips and short-time interruptions), Cl.M.9.7 (Critical load current test), Cl.Q.5.3 (Selectivity determined by test)

IS/IEC 60947 : PART 3 (2020)

Low-Voltage Switchgear and Controlgear: Part 3 Switches Disconnectors Switch-Disconnectors and Fuse-Combination Units

Low - Voltage switchgear and controlgear: Part 3 switch

545000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	2000	-
4(Classification)	-	2000	-
5.3.2(Rated voltages)	-	2000	-
5.3.2.1(Rated operational voltage)	-	2000	-
5.3.2.2(Rated insulation voltage)	-	10000	-
5.3.2.3(Rated impulse withstand voltage)	-	10000	-
5.3.3(Currents)	-	10000	-
5.3.3.2(Conventional free air thermal current)	-	10000	-
5.3.3.3(Conventional enclosed thermal current)	-	10000	-
5.3.3.4(Rated operational current (Ie) or rated operational power)	-	10000	-
5.3.3.5(Rated uninterrupted current)	-	10000	-
5.3.4(Rated frequency)	-	2000	-
5.3.5(Rated duty)	-	2000	-
5.3.5.2(Eight-hour duty)	-	2000	-
5.3.5.3(Uninterrupted duty)	-	2000	-
5.3.6.1(Ability to withstand motor switching overload currents)	-	2000	-
5.3.6.2(Rated making capacity)	-	2000	-
5.3.7.1(Rated short-time withstand current)	-	2000	-
5.4(Utilization category)	-	2000	-
5.5(Control circuits)	-	10000	-
5.6(Auxiliary circuits)	-	10000	-
5.7(Relays and releases)	-	10000	-
6.2.2(Marking)	-	2000	-
6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling)	-	2000	-
7(Normal service, mounting and transport conditions)	-	2000	-
8.1.1(General)	-	2000	-
8.1.2.2(Glow wire testing)	-	20000	-
8.1.7.1(General)	-	2000	-
8.2.1(Operating conditions)	-	2000	-
8.2.1.1(General)	-	2000	-
8.2.1.2(Limits of operation of power operated equipment)	-	2000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	2000	-
8.2.1.4(Limits of operation of shunt releases)	-	2000	-
8.2.2(Temperature-rise)	-	150000	-
8.2.3(Dielectric properties)	-	150000	-
8.2.3.2(Impulse withstand voltage)	-	20000	-
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	2000	-
8.2.4.2(Operational performance)	-	250000	-
8.2.4.3(Mechanical durability)	-	50000	-
8.2.4.4(Electrical durability)	-	300000	-
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	6250	-
8.2.8(Critical load current performance: DC equipment)	-	6250	-
8.2.9(Overload requirements for equipment incorporating fuses)	-	6250	-
9.1.3.2(Mechanical operation test)	-	50000	-
9.1.3.2(Mechanical operation test)	-	50000	-
9.1.3.3(Dielectric test)	-	5000	-
9.1.4(Sampling tests)	-	2000	-
9.1.5Special tests(Special tests)	-	5000	-
9.2(Compliance with constructional requirements)	-	2000	-
9.3.3.6(DC test current ripple)	-	5000	-
9.3.4.2(Temperature-rise)	-	5000	-
9.3.4.3(Test of dielectric properties)	-	13750	-
9.3.4.4.3(Characteristics of transient recovery voltage)	-	18000	-
9.3.4.5(Dielectric verification)	-	13750	-
9.3.4.6(Leakage current)	-	5000	-
9.3.5.2(Operational performance test)	-	5000	-
9.3.8.2(Overload test)	-	5000	-
9.3.9.2(Determination of critical load current)	-	5000	-
9.5.2(Mechanical durability)	-	5000	-
9.5.3(Electrical durability)	-	5000	-
D.7.1.1(Ambient air temperature)	-	5000	-
D.8.1.4(Clearances and creepage distances)	-	2000	-
D.8.1.12(Degrees of protection of enclosed equipment)	-	5000	-
D.9.3.10(Thermal cycling test)	-	5000	-
D.9.3.11(Climatic test)	-	5000	-
D.9.3.12(Temperature-rise verification with solar effects – Outdoor units only)	-	18000	-
E.9.2(Current cycling test)	-	18000	-
E.9.2.4(Temperature measurements)	-	5000	-
E.9.3.1(Flexion test)	-	5000	-
E.9.3.2(Pull-out test)	-	5000	-
8.1.7.2(Additional constructional requirements)	-	5000	-
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	5000	-
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	5000	-
5.3.6.3(Rated breaking capacity)	-	5000	-
8.2.4.1(Making and breaking capacities)	-	5000	-
9.3.4.4(Making and breaking capacities)	-	5000	-
9.4(Electromagnetic compatibility tests)	-	10000	-
3.1(General)	-	10000	-
4(Classification)	-	10000	-
5.3.2(Rated voltages)	-	10000	-
5.3.2.1(Rated operational voltage)	-	10000	-
5.3.2.2(Rated insulation voltage)	-	10000	-
5.3.2.3(Rated impulse withstand voltage)	-	10000	-
5.3.3(Currents)	-	10000	-
5.3.3.2(Conventional free air thermal current)	-	10000	-
5.3.3.3(Conventional enclosed thermal current)	-	10000	-
5.3.3.4(Rated operational current (Ie) or rated operational power)	-	10000	-
5.3.3.5(Rated uninterrupted current)	-	10000	-
5.3.4(Rated frequency)	-	10000	-
5.3.5(Rated duty)	-	10000	-
5.3.5.2(Eight-hour duty)	-	10000	-
5.3.5.3(Uninterrupted duty)	-	10000	-
5.3.6.1(Ability to withstand motor switching overload currents)	-	10000	-
5.3.6.2(Rated making capacity)	-	10000	-
5.3.7.1(Rated short-time withstand current)	-	10000	-
5.4(Utilization category)	-	10000	-
5.5(Control circuits)	-	10000	-
5.6(Auxiliary circuits)	-	10000	-
5.7(Relays and releases)	-	10000	-
6.2.2(Marking)	-	10000	-
6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling)	-	10000	-
7(Normal service, mounting and transport conditions)	-	10000	-
8.1.1(General)	-	10000	-
8.1.2.2(Glow wire testing)	-	10000	-
8.1.7.1(General)	-	10000	-
8.2.1(Operating conditions)	-	10000	-
8.2.1.1(General)	-	10000	-
8.2.1.2(Limits of operation of power operated equipment)	-	10000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	10000	-
8.2.1.4(Limits of operation of shunt releases)	-	10000	-
8.2.2(Temperature-rise)	-	10000	-
8.2.3(Dielectric properties)	-	10000	-
8.2.3.2(Impulse withstand voltage)	-	10000	-
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	10000	-
8.2.4.2(Operational performance)	-	10000	-
8.2.4.3(Mechanical durability)	-	10000	-
8.2.4.4(Electrical durability)	-	10000	-
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	10000	-
8.2.8(Critical load current performance: DC equipment)	-	10000	-
8.2.9(Overload requirements for equipment incorporating fuses)	-	10000	-
9.1.3.2(Mechanical operation test)	-	10000	-
9.1.3.2(Mechanical operation test)	-	10000	-
9.1.3.3(Dielectric test)	-	10000	-
9.1.4(Sampling tests)	-	10000	-
9.1.5Special tests(Special tests)	-	10000	-
9.2(Compliance with constructional requirements)	-	10000	-
9.3.3.6(DC test current ripple)	-	10000	-
9.3.4.2(Temperature-rise)	-	10000	-
9.3.4.3(Test of dielectric properties)	-	10000	-
9.3.4.4.3(Characteristics of transient recovery voltage)	-	10000	-
9.3.4.5(Dielectric verification)	-	10000	-
9.3.4.6(Leakage current)	-	10000	-
9.3.5.2(Operational performance test)	-	10000	-
9.3.8.2(Overload test)	-	10000	-
9.3.9.2(Determination of critical load current)	-	10000	-
9.5.2(Mechanical durability)	-	10000	-
9.5.3(Electrical durability)	-	10000	-
D.7.1.1(Ambient air temperature)	-	10000	-
D.8.1.4(Clearances and creepage distances)	-	10000	-
D.8.1.12(Degrees of protection of enclosed equipment)	-	10000	-
D.9.3.10(Thermal cycling test)	-	10000	-
D.9.3.11(Climatic test)	-	10000	-
D.9.3.12(Temperature-rise verification with solar effects – Outdoor units only)	-	10000	-
E.9.2(Current cycling test)	-	10000	-
E.9.2.4(Temperature measurements)	-	10000	-
E.9.3.1(Flexion test)	-	10000	-
E.9.3.2(Pull-out test)	-	10000	-
8.1.7.2(Additional constructional requirements)	-	10000	-
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	10000	-
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	10000	-
5.3.6.3(Rated breaking capacity)	-	10000	-
8.2.4.1(Making and breaking capacities)	-	10000	-
9.3.4.4(Making and breaking capacities)	-	10000	-
9.4(Electromagnetic compatibility tests)	-	10000	-
3.1(General)	-	2000	-
4(Classification)	-	2000	-
5.3.2(Rated voltages)	-	2000	-
5.3.2.1(Rated operational voltage)	-	2000	-
5.3.2.2(Rated insulation voltage)	-	2000	-
5.3.2.3(Rated impulse withstand voltage)	-	2000	-
5.3.3(Currents)	-	2000	-
5.3.3.2(Conventional free air thermal current)	-	2000	-
5.3.3.3(Conventional enclosed thermal current)	-	2000	-
5.3.3.4(Rated operational current (Ie) or rated operational power)	-	2000	-
5.3.3.5(Rated uninterrupted current)	-	5000	-
5.3.4(Rated frequency)	-	4000	-
5.3.5(Rated duty)	-	5000	-
5.3.5.2(Eight-hour duty)	-	5000	-
5.3.5.3(Uninterrupted duty)	-	5000	-
5.3.6.1(Ability to withstand motor switching overload currents)	-	5000	-
5.3.6.2(Rated making capacity)	-	5000	-
5.3.7.1(Rated short-time withstand current)	-	5000	-
5.4(Utilization category)	-	5000	-
5.5(Control circuits)	-	5000	-
5.6(Auxiliary circuits)	-	5000	-
5.7(Relays and releases)	-	5000	-
6.2.2(Marking)	-	2000	-
6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling)	-	2000	-
7(Normal service, mounting and transport conditions)	-	2000	-
8.1.1(General)	-	2000	-
8.1.2.2(Glow wire testing)	-	2000	-
8.1.7.1(General)	-	2000	-
8.2.1(Operating conditions)	-	2000	-
8.2.1.1(General)	-	2000	-
8.2.1.2(Limits of operation of power operated equipment)	-	2000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	5000	-
8.2.1.4(Limits of operation of shunt releases)	-	5000	-
8.2.2(Temperature-rise)	-	25000	-
8.2.3(Dielectric properties)	-	10000	-
8.2.3.2(Impulse withstand voltage)	-	5000	-
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	5000	-
8.2.4.2(Operational performance)	-	5000	-
8.2.4.3(Mechanical durability)	-	5000	-
8.2.4.4(Electrical durability)	-	5000	-
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	5000	-
8.2.8(Critical load current performance: DC equipment)	-	5000	-
8.2.9(Overload requirements for equipment incorporating fuses)	-	5000	-
9.1.3.2(Mechanical operation test)	-	5000	-
9.1.3.2(Mechanical operation test)	-	5000	-
9.1.3.3(Dielectric test)	-	5000	-
9.1.4(Sampling tests)	-	5000	-
9.1.5Special tests(Special tests)	-	5000	-
9.2(Compliance with constructional requirements)	-	5000	-
9.3.3.6(DC test current ripple)	-	5000	-
9.3.4.2(Temperature-rise)	-	25000	-
9.3.4.3(Test of dielectric properties)	-	10000	-
9.3.4.4.3(Characteristics of transient recovery voltage)	-	5000	-
9.3.4.5(Dielectric verification)	-	5000	-
9.3.4.6(Leakage current)	-	5000	-
9.3.5.2(Operational performance test)	-	5000	-
9.3.8.2(Overload test)	-	5000	-
9.3.9.2(Determination of critical load current)	-	5000	-
9.5.2(Mechanical durability)	-	5000	-
9.5.3(Electrical durability)	-	5000	-
D.7.1.1(Ambient air temperature)	-	5000	-
D.8.1.4(Clearances and creepage distances)	-	5000	-
D.8.1.12(Degrees of protection of enclosed equipment)	-	5000	-
D.9.3.10(Thermal cycling test)	-	5000	-
D.9.3.11(Climatic test)	-	5000	-
D.9.3.12(Temperature-rise verification with solar effects – Outdoor units only)	-	5000	-
E.9.2(Current cycling test)	-	5000	-
E.9.2.4(Temperature measurements)	-	5000	-
E.9.3.1(Flexion test)	-	5000	-
E.9.3.2(Pull-out test)	-	5000	-
8.1.7.2(Additional constructional requirements)	-	5000	-
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	5000	-
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	5000	-
5.3.6.3(Rated breaking capacity)	-	5000	-
8.2.4.1(Making and breaking capacities)	-	5000	-
9.3.4.4(Making and breaking capacities)	-	5000	-
9.4(Electromagnetic compatibility tests)	-	5000	-

Complete

08 Apr, 2024

08 Apr, 2027

Included w.e.f. 06.09.2024 Exclusion: Cl.9.3.4.4 (Making and breaking capacities), 8.2.4 (Ability to make and break under no-load, normal load and overload conditions), Cl.5.3.7 (Short-circuit characteristics), Cl.5.3.7.2 (Rated short-circuit making capacity), Cl.5.3.7.4 (Rated conditional short-circuit current), Cl.5.8 (Co-ordination with short-circuit protective devices (SCPD)), Cl.9.3.7.2 (Circuit-breaker protected short-circuit withstand), Cl.8.2.5 (Ability to make, break or withstand short-circuit currents), Cl.9.3.6.2 (Short-time withstand current test), Cl.9.3.6.3 (Short-circuit making capacity test), Cl.9.3.7.3 (Fuse protected short-circuit withstand), Cl.9.5.4 (Damp heat, salt mist, vibration and shock)

IS/IEC 60947 : Part 5 : Sec 1 (2009)

Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)

128000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3.3.2(Operating limits of contactor relays )	-	60000	-
8.3.3.3(Temperature rise )	-	60000	-
8.3.3.4(Dielectric properties)	-	60000	-
8.2.4 of IS/IEC 60947-1(Mechanical properties of Terminal)	-	60000	-
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	15000	-
8.3.3.5.5 b)( Dielectric verification)	-	15000	-
8.3.3.5.5 b)(Dielectric verification)	-	15000	-
8.3.4.1(Performance under conditional short-circuit current)	-	30000	-
Annex C of IEC 60947-1(Degree of protection of enclosed control circuit devices)	-	10000	-
7.1.3(Measurement of clearances and creepage distances, if applicable)	-	5000	-
8.3.3.5.5 b)(Dielectric verification)	-	15000	-
8.3.3.2(Operating limits of contactor relays )	-	15000	-
8.3.3.3(Temperature rise )	-	15000	-
8.3.3.4(Dielectric properties)	-	15000	-
8.2.4 of IS/IEC 60947-1(Mechanical properties of Terminal)	-	15000	-
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	15000	-
8.3.3.5.5 b)( Dielectric verification)	-	15000	-
8.3.3.5.5 b)(Dielectric verification)	-	15000	-
8.3.4.1(Performance under conditional short-circuit current)	-	30000	-
Annex C of IEC 60947-1(Degree of protection of enclosed control circuit devices)	-	10000	-
7.1.3(Measurement of clearances and creepage distances, if applicable)	-	5000	-
8.1.5(Special tests)	-	1000	-
Annex C(No. of operations)	-	1000	-
C.1.2(Observation)	-	1000	-
C.2(Mechanical durability)	-	1000	-
G.8.1.1(Pull test)	-	1000	-
G.8.1.2(Torque test)	-	1000	-
G.8.1.3(Push test)	-	1000	-
G.8.1.4(Bend test)	-	1000	-
7(Constructional requirements)	-	1000	-
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)(Verification of direct opening action)	-	1000	-
7.1 & 8.2(Constructional requirements)	-	1000	-
7.3.1(General)	-	1000	-
7.3.2(Immunity)	-	1000	-
7.3.3(Emission)	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.2(Terminal identification and marking)	-	1000	-
5.2.3(Functional markings )	-	1000	-
5.2.5(Operating diagram)	-	1000	-
5.2.5.1( Position indication )	-	1000	-
5.2.5.2( Terminal markings for operating diagrams)	-	1000	-
5.2.6(Time delay markings)	-	1000	-
5.3(Instructions for installation, operation and maintenance)	-	1000	-
5.4(Additional information)	-	1000	-
8.3.3.5.2( Making and breaking capacities of switching elements under normal conditions)	-	1000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	1000	-
8.3.4.3(Test circuit and test quantities)	-	1000	-
8.3.4.4 a)(Condition of the switching element after the test )	-	1000	-
8.3.4.4 b)(Condition of the switching element after the test )	-	1000	-
8.3.3.5.5 b)(Dielectric verification)	-	1000	-
8.3.3.2(Operating limits of contactor relays )	-	1000	-
8.3.3.3(Temperature rise )	-	1000	-
8.3.3.4(Dielectric properties)	-	1000	-
8.2.4 of IS/IEC 60947-1(Mechanical properties of Terminal)	-	1000	-
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	1000	-
8.3.3.5.5 b)( Dielectric verification)	-	1000	-
8.3.3.5.5 b)(Dielectric verification)	-	1000	-
8.3.4.1(Performance under conditional short-circuit current)	-	1000	-
Annex C of IEC 60947-1(Degree of protection of enclosed control circuit devices)	-	1000	-
7.1.3(Measurement of clearances and creepage distances, if applicable)	-	1000	-
8.1.5(Special tests)	-	1000	-
Annex C(No. of operations)	-	1000	-
C.1.2(Observation)	-	1000	-
C.2(Mechanical durability)	-	1000	-
G.8.1.1(Pull test)	-	1000	-
G.8.1.2(Torque test)	-	1000	-
G.8.1.3(Push test)	-	1000	-
G.8.1.4(Bend test)	-	1000	-
7(Constructional requirements)	-	1000	-
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)(Verification of direct opening action)	-	1000	-
7.1 & 8.2(Constructional requirements)	-	1000	-
7.3.1(General)	-	1000	-
7.3.2(Immunity)	-	1000	-
7.3.3(Emission)	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.1( Marking : General )	-	1000	-
5.2.2(Terminal identification and marking)	-	1000	-
5.2.3(Functional markings )	-	1000	-
5.2.5(Operating diagram)	-	1000	-
5.2.5.1( Position indication )	-	1000	-
5.2.5.2( Terminal markings for operating diagrams)	-	1000	-
5.2.6(Time delay markings)	-	1000	-
5.3(Instructions for installation, operation and maintenance)	-	1000	-
5.4(Additional information)	-	1000	-
8.3.3.5.2( Making and breaking capacities of switching elements under normal conditions)	-	1000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	1000	-
8.3.4.3(Test circuit and test quantities)	-	1000	-
8.3.4.4 a)(Condition of the switching element after the test )	-	1000	-
8.3.4.4 b)(Condition of the switching element after the test )	-	1000	-
8.3.3.5.5 b)(Dielectric verification)	-	1000	-
8.3.3.2(Operating limits of contactor relays )	-	15000	-
8.3.3.3(Temperature rise )	-	15000	-
8.3.3.4(Dielectric properties)	-	15000	-
8.2.4 of IS/IEC 60947-1(Mechanical properties of Terminal)	-	15000	-
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	15000	-
8.3.3.5.5 b)( Dielectric verification)	-	15000	-
8.3.3.5.5 b)(Dielectric verification)	-	15000	-
8.3.4.1(Performance under conditional short-circuit current)	-	15000	-
Annex C of IEC 60947-1(Degree of protection of enclosed control circuit devices)	-	10000	-
7.1.3(Measurement of clearances and creepage distances, if applicable)	-	5000	-
8.1.5(Special tests)	-	5000	-
Annex C(No. of operations)	-	5000	-
C.1.2(Observation)	-	5000	-
C.2(Mechanical durability)	-	5000	-
G.8.1.1(Pull test)	-	5000	-
G.8.1.2(Torque test)	-	5000	-
G.8.1.3(Push test)	-	5000	-
G.8.1.4(Bend test)	-	5000	-
7(Constructional requirements)	-	5000	-
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)(Verification of direct opening action)	-	5000	-
7.1 & 8.2(Constructional requirements)	-	5000	-
7.3.1(General)	-	5000	-
7.3.2(Immunity)	-	5000	-
7.3.3(Emission)	-	5000	-
5.2.1( Marking : General )	-	5000	-
5.2.1( Marking : General )	-	5000	-
5.2.1( Marking : General )	-	5000	-
5.2.1( Marking : General )	-	5000	-
5.2.1( Marking : General )	-	5000	-
5.2.2(Terminal identification and marking)	-	5000	-
5.2.3(Functional markings )	-	5000	-
5.2.5(Operating diagram)	-	5000	-
5.2.5.1( Position indication )	-	5000	-
5.2.5.2( Terminal markings for operating diagrams)	-	5000	-
5.2.6(Time delay markings)	-	5000	-
5.3(Instructions for installation, operation and maintenance)	-	5000	-
5.4(Additional information)	-	5000	-
8.3.3.5.2( Making and breaking capacities of switching elements under normal conditions)	-	5000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	5000	-
8.3.4.3(Test circuit and test quantities)	-	5000	-
8.3.4.4 a)(Condition of the switching element after the test )	-	5000	-
8.3.4.4 b)(Condition of the switching element after the test )	-	5000	-
8.3.3.5.5 b)(Dielectric verification)	-	5000	-
F.8.1.2.3(Rapid change of temperature test)	-	5000	-
F 8.1.2.4(Impact test)	-	5000	-
F 8.1.2.6(Dielectric test after stresses)	-	5000	-
H.8.2(Voltage drop test)	-	5000	-
H.8.5(Making and breaking capacities)	-	5000	-
H.8.6(Performance under short circuit current conditions)	-	5000	-
7, J.7(Constructional requirements)	-	5000	-
J.7.1.12(Indicator lights with built-in transformers)	-	5000	-
J.8.3.3.4.3(Dielectric test (indicator lights with built-in transformers))	-	5000	-
J.8.3.3.3(Temp-rise tests)	-	5000	-

Complete

08 Apr, 2024

08 Apr, 2027

Included w.e.f. 07.08.2024 Exclusion: 8.2.5 (Verification of actuation force or moment), 8.2.6 ( Verification of limitation of rotation of a rotary switch), 5.2.4 (Emergency stop), 8.2.5 (Verification of actuation force or moment), C.3 (Electrical durability), H.8.4 (OFF-state current), H.8.7 (Verification of electromagnetic compatibility), H.8.1 f) (Impulse voltage withstand test), J.8.3.4 (Short Circuit test (on built-in transformers, if any)), J.8.4.1.2 (Shock), J.8.4.1.3 (Vibration), J.8.4.2 (Indirect support mounting), J.8.5 (Degree of protection for indicating towers), K 8.3.5 (Mechanical operation at limits of temperature), K 8.3.7 (Test Sequence VIII Verification of robustness of actuating system), K 8.3.4 (Performance under conditional shortcircuit current), L 8.4 (a) (Test of NC contact), L 8.4 (b) (Test of NO contact)

IS/IEC 60947 : PART 3 (2012)

Low - Voltage switchgear and controlgear: Part 3 switches, disconnectors, switch disconnectors and fuse - Combination units (First Revision)

545000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3.3.1(Temperature-rise)	-	150000	-
8.3.3.1(Temperature-rise)	-	150000	-
8.3.3.1(Temperature-rise)	-	150000	-
8.3.3.1(Temperature-rise)	-	150000	-
8.3.3.1(Temperature-rise)	-	150000	-
8.3.3.2(Test of dielectric properties)	-	150000	-
8.3.3.2(Test of dielectric properties)	-	150000	-
8.3.3.2(Test of dielectric properties)	-	150000	-
8.3.3.2(Test of dielectric properties)	-	150000	-
8.3.3.4(Dielectric verification)	-	150000	-
8.3.3.5(Leakage current)	-	150000	-
8.3.3.6(Temperature-rise verification)	-	150000	-
8.3.3.6(Temperature-rise verification)	-	150000	-
8.3.3.6(Temperature-rise verification)	-	150000	-
8.3.3.6(Temperature-rise verification)	-	150000	-
8.3.3.6(Temperature-rise verification)	-	150000	-
8.3.3.6(Temperature-rise verification)	-	150000	-
8.3.3.6(Temperature-rise verification)	-	150000	-
8.3.3.7(Strength of actuator mechanism)	-	150000	-
8.3.3.7(Strength of actuator mechanism)	-	150000	-
8.3.4.1.5(Operational performance test)	-	250000	-
8.3.4.1.6(Operational performance test)	-	250000	-
8.3.4.2(Dielectric verification)	-	250000	-
8.3.4.3(Leakage current)	-	250000	-
8.3.4.4(Temperature-rise verification)	-	250000	-
8.3.4.4(Temperature-rise verification)	-	250000	-
8.3.4.4(Temperature-rise verification)	-	250000	-
8.3.4.4(Temperature-rise verification)	-	250000	-
8.3.4.4(Temperature-rise verification)	-	250000	-
8.3.4.4(Temperature-rise verification)	-	250000	-
8.3.4.4(Temperature-rise verification)	-	250000	-
8.3.5.3(Dielectric verification)	-	45000	-
8.3.5.4(Leakage current)	-	45000	-
8.3.5.5(Temperature-rise verification)	-	45000	-
8.3.5.5(Temperature-rise verification)	-	45000	-
8.3.5.5(Temperature-rise verification)	-	45000	-
8.3.5.5(Temperature-rise verification)	-	45000	-
8.3.5.5(Temperature-rise verification)	-	45000	-
8.3.5.5(Temperature-rise verification)	-	45000	-
8.3.5.5(Temperature-rise verification)	-	45000	-
8.3.6.3(Dielectric verification)	-	45000	-
8.3.6.4(Leakage current)	-	45000	-
8.3.6.5(Temperature-rise verification)	-	45000	-
8.3.6.5(Temperature-rise verification)	-	45000	-
8.3.6.5(Temperature-rise verification)	-	45000	-
8.3.6.5(Temperature-rise verification)	-	45000	-
8.3.6.5(Temperature-rise verification)	-	45000	-
8.3.6.5(Temperature-rise verification)	-	45000	-
8.3.6.5(Temperature-rise verification)	-	45000	-
8.3.7.1(Overload test)	-	55000	-
8.3.7.2(Dielectric verification)	-	55000	-
8.3.7.3(Leakage current)	-	55000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.4(Dielectric verification)	-	5000	-
8.3.3.5(Leakage current)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.7(Strength of actuator mechanism)	-	150000	-
8.3.3.7(Strength of actuator mechanism)	-	150000	-
8.3.4.1.5(Operational performance test)	-	250000	-
8.3.4.1.6(Operational performance test)	-	250000	-
8.3.4.2(Dielectric verification)	-	250000	-
8.3.4.3(Leakage current)	-	250000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.5.3(Dielectric verification)	-	5000	-
8.3.5.4(Leakage current)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.6.3(Dielectric verification)	-	5000	-
8.3.6.4(Leakage current)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.7.1(Overload test)	-	55000	-
8.3.7.2(Dielectric verification)	-	55000	-
8.3.7.3(Leakage current)	-	55000	-
8.3.7.4(Temperature-rise verification)	-	55000	-
8.3.7.4(Temperature-rise verification)	-	55000	-
8.3.7.4(Temperature-rise verification)	-	55000	-
8.3.7.4(Temperature-rise verification)	-	55000	-
8.3.7.4(Temperature-rise verification)	-	55000	-
8.3.7.4(Temperature-rise verification)	-	55000	-
8.3.7.4(Temperature-rise verification)	-	55000	-
3.1(Classification)	-	2000	-
3.2(Classification)	-	2000	-
3.3(Classification)	-	2000	-
3.3(Classification)	-	2000	-
4.1(Characteristics)	-	2000	-
4.2(Characteristics)	-	2000	-
4.3(Characteristics)	-	2000	-
4.3.1.1(Characteristics)	-	2000	-
4.3.1.2(Characteristics)	-	2000	-
4.3.1.3(Characteristics)	-	2000	-
4.3.2(Characteristics)	-	2000	-
4.3.2.1(Characteristics)	-	2000	-
4.3.2.2(Characteristics)	-	2000	-
4.3.2.3(Characteristics)	-	2000	-
4.3.2.4(Characteristics)	-	2000	-
4..3.3(Characteristics)	-	2000	-
4..3.4(Characteristics)	-	2000	-
4..3.4.1(Characteristics)	-	2000	-
4..3.4.2(Characteristics)	-	2000	-
4.3.5.1(Characteristics)	-	2000	-
4.3.5.2(Characteristics)	-	2000	-
4.3.5.3(Characteristics)	-	2000	-
4.3.6.1(Characteristics)	-	2000	-
4.3.6.2(Characteristics)	-	2000	-
4.3.6.4(Characteristics)	-	2000	-
4.4(Characteristics)	-	2000	-
4.5(Characteristics)	-	2000	-
4.6(Characteristics)	-	2000	-
4.7(Characteristics)	-	2000	-
4.8(Characteristics)	-	2000	-
5.1(Product information)	-	10000	-
5.2(Product information)	-	10000	-
5.2.3(Product information)	-	10000	-
5.2.4(Product information)	-	10000	-
8.2.1.1.1(Test of resistance to abnormal heat and fire)	-	30000	-
8.4(Electromagnetic compatibility tests)	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.2.2(Emission (Equipment incorporating electronic circuits ))	-	18000	-
8.5.1(Mechanical durability)	-	50000	-
8.5.2(Electrical durability)	-	300000	-
7.1(Constructional Requirements (except those covered under type tests))	-	18000	-
7.3.2(Electrostatic discharge)	-	18000	-
7.3.2(Electrostatic discharge)	-	18000	-
7.3.2(Radiated RF Electromagnetic Field)	-	18000	-
7.3.2(Fast transient/ burst)	-	18000	-
7.3.2(Surge)	-	18000	-
7.3.2(Conducted disturbances induced by RF fields)	-	18000	-
7.3.2(Emission)	-	18000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.4(Dielectric verification)	-	5000	-
8.3.3.5(Leakage current)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.7(Strength of actuator mechanism)	-	5000	-
8.3.3.7(Strength of actuator mechanism)	-	5000	-
8.3.4.1.5(Operational performance test)	-	25000	-
8.3.4.1.6(Operational performance test)	-	6250	-
8.3.4.2(Dielectric verification)	-	6250	-
8.3.4.3(Leakage current)	-	6250	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.5.3(Dielectric verification)	-	5000	-
8.3.5.4(Leakage current)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.6.3(Dielectric verification)	-	5000	-
8.3.6.4(Leakage current)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.7.1(Overload test)	-	13750	-
8.3.7.2(Dielectric verification)	-	13750	-
8.3.7.3(Leakage current)	-	13750	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
3.1(Classification)	-	2000	-
3.2(Classification)	-	2000	-
3.3(Classification)	-	2000	-
3.3(Classification)	-	2000	-
4.1(Characteristics)	-	2000	-
4.2(Characteristics)	-	2000	-
4.3(Characteristics)	-	2000	-
4.3.1.1(Characteristics)	-	2000	-
4.3.1.2(Characteristics)	-	2000	-
4.3.1.3(Characteristics)	-	2000	-
4.3.2(Characteristics)	-	2000	-
4.3.2.1(Characteristics)	-	2000	-
4.3.2.2(Characteristics)	-	2000	-
4.3.2.3(Characteristics)	-	2000	-
4.3.2.4(Characteristics)	-	2000	-
4..3.3(Characteristics)	-	2000	-
4..3.4(Characteristics)	-	2000	-
4..3.4.1(Characteristics)	-	2000	-
4..3.4.2(Characteristics)	-	2000	-
4.3.5.1(Characteristics)	-	2000	-
4.3.5.2(Characteristics)	-	2000	-
4.3.5.3(Characteristics)	-	2000	-
4.3.6.1(Characteristics)	-	2000	-
4.3.6.2(Characteristics)	-	2000	-
4.3.6.4(Characteristics)	-	2000	-
4.4(Characteristics)	-	2000	-
4.5(Characteristics)	-	2000	-
4.6(Characteristics)	-	2000	-
4.7(Characteristics)	-	2000	-
4.8(Characteristics)	-	2000	-
5.1(Product information)	-	10000	-
5.2(Product information)	-	10000	-
5.2.3(Product information)	-	10000	-
5.2.4(Product information)	-	10000	-
8.2.1.1.1(Test of resistance to abnormal heat and fire)	-	30000	-
8.4(Electromagnetic compatibility tests)	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	18000	-
8.4.2.2(Emission (Equipment incorporating electronic circuits ))	-	18000	-
8.5.1(Mechanical durability)	-	50000	-
8.5.2(Electrical durability)	-	30000	-
7.1(Constructional Requirements (except those covered under type tests))	-	18000	-
7.3.2(Electrostatic discharge)	-	18000	-
7.3.2(Electrostatic discharge)	-	18000	-
7.3.2(Radiated RF Electromagnetic Field)	-	18000	-
7.3.2(Fast transient/ burst)	-	18000	-
7.3.2(Surge)	-	18000	-
7.3.2(Conducted disturbances induced by RF fields)	-	27000	-
7.3.2(Emission)	-	18000	-
8.2.1.1.2(Test of resistance to abnormal heat and fire)	-	30000	-
8.2.3(Enclosures for equipment)	-	25000	-
8.2.4(Mechanical properties of terminals)	-	25000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	25000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	25000	-
8.2.4.4.1(Pull-out test)	-	25000	-
8.2.4.4.2(Flat copper conductors)	-	25000	-
8.1.3.2(Mechanical operation test)	-	25000	-
8.1.3.3(Dielectric test)	-	25000	-
8.1.4(Sampling tests)	-	10000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.1(Temperature-rise)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.2(Test of dielectric properties)	-	5000	-
8.3.3.4(Dielectric verification)	-	5000	-
8.3.3.5(Leakage current)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.6(Temperature-rise verification)	-	5000	-
8.3.3.7(Strength of actuator mechanism)	-	5000	-
8.3.3.7(Strength of actuator mechanism)	-	5000	-
8.3.4.1.5(Operational performance test)	-	5000	-
8.3.4.1.6(Operational performance test)	-	5000	-
8.3.4.2(Dielectric verification)	-	5000	-
8.3.4.3(Leakage current)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.4.4(Temperature-rise verification)	-	5000	-
8.3.5.3(Dielectric verification)	-	5000	-
8.3.5.4(Leakage current)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.5.5(Temperature-rise verification)	-	5000	-
8.3.6.3(Dielectric verification)	-	5000	-
8.3.6.4(Leakage current)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.6.5(Temperature-rise verification)	-	5000	-
8.3.7.1(Overload test)	-	5000	-
8.3.7.2(Dielectric verification)	-	5000	-
8.3.7.3(Leakage current)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
8.3.7.4(Temperature-rise verification)	-	5000	-
3.1(Classification)	-	5000	-
3.2(Classification)	-	5000	-
3.3(Classification)	-	5000	-
3.3(Classification)	-	5000	-
4.1(Characteristics)	-	5000	-
4.2(Characteristics)	-	5000	-
4.3(Characteristics)	-	5000	-
4.3.1.1(Characteristics)	-	5000	-
4.3.1.2(Characteristics)	-	5000	-
4.3.1.3(Characteristics)	-	5000	-
4.3.2(Characteristics)	-	5000	-
4.3.2.1(Characteristics)	-	5000	-
4.3.2.2(Characteristics)	-	5000	-
4.3.2.3(Characteristics)	-	5000	-
4.3.2.4(Characteristics)	-	5000	-
4..3.3(Characteristics)	-	5000	-
4..3.4(Characteristics)	-	5000	-
4..3.4.1(Characteristics)	-	5000	-
4..3.4.2(Characteristics)	-	5000	-
4.3.5.1(Characteristics)	-	5000	-
4.3.5.2(Characteristics)	-	5000	-
4.3.5.3(Characteristics)	-	5000	-
4.3.6.1(Characteristics)	-	5000	-
4.3.6.2(Characteristics)	-	5000	-
4.3.6.4(Characteristics)	-	5000	-
4.4(Characteristics)	-	5000	-
4.5(Characteristics)	-	5000	-
4.6(Characteristics)	-	5000	-
4.7(Characteristics)	-	5000	-
4.8(Characteristics)	-	5000	-
5.1(Product information)	-	5000	-
5.2(Product information)	-	5000	-
5.2.3(Product information)	-	5000	-
5.2.4(Product information)	-	5000	-
8.2.1.1.1(Test of resistance to abnormal heat and fire)	-	5000	-
8.4(Electromagnetic compatibility tests)	-	5000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	5000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	5000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	5000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	5000	-
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	5000	-
8.4.2.2(Emission (Equipment incorporating electronic circuits ))	-	5000	-
8.5.1(Mechanical durability)	-	5000	-
8.5.2(Electrical durability)	-	5000	-
7.1(Constructional Requirements (except those covered under type tests))	-	5000	-
7.3.2(Electrostatic discharge)	-	5000	-
7.3.2(Electrostatic discharge)	-	5000	-
7.3.2(Radiated RF Electromagnetic Field)	-	5000	-
7.3.2(Fast transient/ burst)	-	5000	-
7.3.2(Surge)	-	5000	-
7.3.2(Conducted disturbances induced by RF fields)	-	5000	-
7.3.2(Emission)	-	5000	-
8.2.1.1.2(Test of resistance to abnormal heat and fire)	-	5000	-
8.2.3(Enclosures for equipment)	-	5000	-
8.2.4(Mechanical properties of terminals)	-	5000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	5000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	5000	-
8.2.4.4.1(Pull-out test)	-	5000	-
8.2.4.4.2(Flat copper conductors)	-	5000	-
8.1.3.2(Mechanical operation test)	-	5000	-
8.1.3.3(Dielectric test)	-	5000	-
8.1.4(Sampling tests)	-	5000	-

Complete

08 Apr, 2024

08 Apr, 2027

Included w.e.f. 05.08.2024 Exclusion: Cl. 8.3.3.3 (Making and breaking capacities), Cl. 8.3.3.7 (Strength of actuator mechanism), Cl. 8.3.5.1 ( Short-time withstand current test), Cl. 8.3.5.2 (Short-circuit making capacity test), Cl. 8.3.6.2, 1 a) (Fuse protected short-circuit withstand), 8.3.6.2, 1 b) (Fuse protected short-circuit making), Cl. 8.3.3.3.5 (Behaviour of equipment during making and breaking capacity tests), Cl. 8.3.3.3.6 (Condition of equipment after the making and breaking capacity tests)

IS/IEC 60947 : Part 4 : Sec 1 (2012)

Low - Voltage switchgear and controlgear: Part 4 contactors and motor - Starters: Sec 1 electromechanical contactors and motor - Starters (First Revision)

160000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.3.3.3.3( Temperature rise of a part )	-	100000	-
9.3.3.2(Operating limits)	-	100000	-
9.3.3.1(Ambient air temperatur)	-	100000	-
9.3.3.4 (Dielectric properties )	-	100000	-
9.3.3.5("verification of rated making and breaking capacities, change-over ability and reversibility, where applicable")	-	30000	-
9.3.3.6(verification of conventional operational performance)	-	30000	-
9.3.5(Overload current withstand capability of contactors)	-	10000	-
Cl.9.1.5.2 (Annex Q of IS/IEC 60947-1)(Special tests)	-	20000	-
9.3.3.3.3( Temperature rise of a part )	-	25000	-
9.3.3.2(Operating limits)	-	30000	-
9.3.3.1(Ambient air temperatur)	-	30000	-
9.3.3.4 (Dielectric properties )	-	10000	-
9.3.3.5("verification of rated making and breaking capacities, change-over ability and reversibility, where applicable")	-	30000	-
9.3.3.6(verification of conventional operational performance)	-	30000	-
9.3.5(Overload current withstand capability of contactors)	-	10000	-
Cl.9.1.5.2 (Annex Q of IS/IEC 60947-1)(Special tests)	-	18000	-
5.2(Type of equipment )	-	2000	-
5.2.1(Kind of equipment)	-	2000	-
5.2.1(Kind of equipment)	-	2000	-
5.2.1(Kind of equipment)	-	2000	-
5.2.1(Kind of equipment)	-	2000	-
5.2.1(Kind of equipment)	-	2000	-
5.2.1(Kind of equipment)	-	2000	-
5.2.2(Number of poles)	-	2000	-
5.2.3(Kind of current)	-	2000	-
5.2.4 (Interrupting medium )	-	2000	-
5.2.5.1( Operating conditions of the equipment - Method of Operation)	-	2000	-
5.2.5.2(Method of control )	-	2000	-
5.2.5.3(Method of change-over for particular types of starters )	-	2000	-
5.2.5.4(Method of connecting for particular types of starters )	-	2000	-
5.3.1.1(Rated voltages : Rated operational voltage (Ue) )	-	2000	-
5.3.1.1.1 (Rated stator operational voltage (Ues) )	-	2000	-
5.3.1.1.2( Rated rotor operational voltage (Uer) )	-	2000	-
5.3.1.2 (Rated insulation voltage (Ui) )	-	2000	-
5.3.1.2.1 (Rated stator insulation voltage (Uis)	-	2000	-
5.3.1.2.2 (Rated rotor insulation voltage (Uir) )	-	2000	-
5.3.1.3 (Rated impulse withstand voltage (Uimp) )	-	2000	-
5.3.1.4 (Rated starting voltage of an auto-transformer starter )	-	2000	-
5.3.2.1 (Conventional free air thermal current (Ith) )	-	2000	-
5.3.2.2 (Conventional enclosed thermal current (Ithe) )	-	2000	-
5.3.2.3( Conventional stator thermal current (Iths))	-	2000	-
5.3.2.4 (Conventional rotor thermal current (Ithr))	-	2000	-
5.3.2.5( Rated operational currents (Ie) or rated operational powers )	-	2000	-
5.3.2.6( Rated stator operational current (Ies) or rated stator operational power )	-	2000	-
5.3.2.7 (Rated rotor operational current (Ier) )	-	2000	-
5.3.2.8 (Rated uninterrupted current (Iu))	-	2000	-
5.3.3 (Rated frequency )	-	2000	-
5.3.4 (Rated duties )	-	2000	-
5.3.4.1 (Eight-hour duty (continuous duty)	-	2000	-
5.3.4.2 (Uninterrupted duty )	-	2000	-
5.3.4.3 (Intermittent periodic duty or intermittent duty )	-	2000	-
5.3.4.4( Temporary duty )	-	2000	-
5.3.4.5( Periodic duty )	-	2000	-
5.3.5 (Normal load and overload characteristics )	-	2000	-
5.3.5.1 (Ability to withstand motor switching overload currents )	-	2000	-
5.3.5.2 (Rated making capacity )	-	2000	-
5.3.5.3 (Rated breaking capacity )	-	2000	-
5.3.5.4 (Conventional operational performance )	-	2000	-
5.3.5.5( Starting and stopping characteristics of starters )	-	2000	-
5.3.5.5( Starting and stopping characteristics of starters )	-	2000	-
5.3.5.5( Starting and stopping characteristics of starters )	-	2000	-
5.3.5.5( Starting and stopping characteristics of starters )	-	2000	-
5.3.5.5( Starting and stopping characteristics of starters )	-	2000	-
5.3.5.5( Starting and stopping characteristics of starters )	-	2000	-
5.3.5.5.1 (Starting characteristics of rheostatic rotor starters )	-	2000	-
5.3.5.5.2( Standard conditions for making and breaking corresponding to the starting characteristics for rheostatic rotor starters)	-	2000	-
5.3.5.5.3( Starting characteristics for two-step auto-transformer starters)	-	2000	-
5.3.6 (Rated conditional short-circuit current)	-	2000	-
5.3.7 (Pole impedance of a contactor (Z) )	-	2000	-
5.4.1(Utilization category : General)	-	2000	-
5.4.2(Assignment of utilization categories based on the results of tests )	-	2000	-
5.4.2(Assignment of utilization categories based on the results of tests )	-	2000	-
5.5( Control circuit)	-	2000	-
5.5( Control circuit)	-	2000	-
5.5( Control circuit)	-	2000	-
5.5( Control circuit)	-	2000	-
5.5( Control circuit)	-	2000	-
5.5( Control circuit)	-	2000	-
5.6( Auxiliary circuits)	-	2000	-
5.7.2( Types of relay or releas)	-	2000	-
5.7.3 (Characteristic values : Release with shunt coil, under-voltage (under-current), over-voltage (instantaneous over current), current or voltage imbalance and phase reversal opening relay or release)	-	2000	-
5.7.3 (Characteristic values : Release with shunt coil, under-voltage (under-current), over-voltage (instantaneous over current), current or voltage imbalance and phase reversal opening relay or release)	-	1000	-
5.7.3 (Characteristic values : Release with shunt coil, under-voltage (under-current), over-voltage (instantaneous over current), current or voltage imbalance and phase reversal opening relay or release)	-	1000	-
5.7.3 (Characteristic values : Release with shunt coil, under-voltage (under-current), over-voltage (instantaneous over current), current or voltage imbalance and phase reversal opening relay or release)	-	1000	-
5.7.3 (Characteristic values : Release with shunt coil, under-voltage (under-current), over-voltage (instantaneous over current), current or voltage imbalance and phase reversal opening relay or release)	-	1000	-
5.7.3 (Characteristic values : Overload relay)	-	1000	-
5.7.3 (Characteristic values : Overload relay)	-	1000	-
5.7.3 (Characteristic values : Overload relay)	-	1000	-
5.7.3 (Characteristic values : Overload relay)	-	1000	-
5.7.3 (Characteristic values : Overload relay)	-	1000	-
5.7.3 (Characteristic values : Overload relay)	-	1000	-
5.7.3 (Characteristic values : Overload relay)	-	1000	-
5.7.3 (Characteristic values : Release with residual current sensing relay:)	-	1000	-
5.7.3 (Characteristic values : Release with residual current sensing relay:)	-	1000	-
5.7.3 (Characteristic values : Release with residual current sensing relay:)	-	1000	-
5.7.3 (Characteristic values : Release with residual current sensing relay:)	-	1000	-
5.7.3 (Characteristic values : Release with residual current sensing relay:)	-	1000	-
5.7.4( Designation and current settings of overload relays)	-	1000	-
5.7.5( Time-current characteristics of overload relays )	-	1000	-
5.7.6 (Influence of ambient air temperature )	-	1000	-
5.8(Co-ordination with short-circuit protective devices )	-	1000	-
5.10.1( Types : Time-delay devices)	-	1000	-
5.10.1( Types : Time-delay devices)	-	1000	-
5.10.1( Types : Time-delay devices)	-	1000	-
5.10.2 (Characteristics )	-	1000	-
5.10.2 (Characteristics )	-	1000	-
5.10.2 (Characteristics )	-	1000	-
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	1000	-
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	1000	-
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	1000	-
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	1000	-
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	1000	-
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	1000	-
5.12( Types and characteristics of starting resistors for rheostatic rotor starters )	-	1000	-
5.12( Types and characteristics of starting resistors for rheostatic rotor starters )	-	1000	-
5.12( Types and characteristics of starting resistors for rheostatic rotor starters )	-	1000	-
5.12( Types and characteristics of starting resistors for rheostatic rotor starters )	-	1000	-
6.1.1( Identification)	-	1000	-
6.1.1( Identification)	-	1000	-
6.1.1( Identification)	-	1000	-
6.1.2(Characteristics: )	-	1000	-
6.1.2(Safety and installation: )	-	1000	-
6.1.2(Control circuits)	-	1000	-
6.1.2(Overload relays and releases)	-	1000	-
6.1.2(Overload relays and releases)	-	1000	-
6.1.2(Rheostatic rotor starters)	-	1000	-
6.1.2(Rheostatic rotor starters)	-	1000	-
6.1.2(Rheostatic rotor starters)	-	1000	-
6.1.2(Auto-transformer starters: )	-	1000	-
6.1.2(Vacuum contactors and starters: )	-	1000	-
6.1.2(Vacuum contactors and starters: )	-	1000	-
6.1.2(Vacuum contactors and starters: )	-	1000	-
6.2(Marking )	-	1000	-
7(Normal service, mounting and transport conditions )	-	1000	-
8.1.1(Constructional requirements : Genaral)	-	1000	-
8.1.2.1( General materials requirements )	-	1000	-
8.1.2.2 (Glow wire testing )	-	1000	-
8.1.2.3 (Test based on flammability category )	-	1000	-
8.1.3( Current-carrying parts and their connections )	-	1000	-
8.1.4(Clearance)	-	1000	-
8.1.4( creepage distances )	-	1000	-
8.1.5(Actuator )	-	1000	-
8.1.5.1( Insulation)	-	1000	-
8.1.5.2 (Direction of movement)	-	1000	-
8.1.5.3( Mounting )	-	1000	-
8.1.6.1 (Indicating means )	-	1000	-
8.1.6.2( Indication by the actuator)	-	1000	-
8.1.7( Additional requirements for equipment suitable for isolation )	-	1000	-
8.1.8( Terminals)	-	1000	-
8.2.2.3 (Accessible part)	-	1000	-
8.2.2.4( Ambient air temperatur)	-	1000	-
9.3.3.3.2 (Measurement of the temperature of parts )	-	25000	-
9.3.3.3.4 (Temperature rise of the main circuit )	-	25000	-
9.3.3.3.5( Temperature rise of control circuit)	-	25000	-
9.3.3.3.6( Temperature rise of coils and electromagnets )	-	25000	-
9.3.3.3.7 (Temperature rise of auxiliary circuits )	-	25000	-
9.3.3.4.1( Type tests )	-	10000	-
9.2.1(General)	-	2000	-
9.2.2(Electrical performance of screwless-type clamping unit)	-	2000	-
9.1.2, (i) (8.2.4 of IEC 60947-1:2007)(Mechanical properties of terminals)	-	1000	-
9.1.2 (j) (Annex C of IEC 60947-1)(verification of degrees of protection of enclosed contactors and starters)	-	1000	-
9.3.3.2.1(Power-operated equipment)	-	30000	-
9.3.3.2.1.2(Coil power consumption)	-	30000	-
9.3.3.2.2(Relays and releases)	-	30000	-
9.3.6.2(Operation and operating limits)	-	30000	-
9.3.6.2(Operation and operating limits)	-	30000	-
8.1.10(Provisions for protective earthing)	-	10000	-
8.1.11(Enclosures for equipment)	-	10000	-
8.1.12(Degrees of protection of enclosed equipment)	-	10000	-
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	10000	-
9.2.3(Ageing test for screwless-type clamping units)	-	10000	-
8.2.2(Temperature Rise)	-	30000	-
8.2.4.3(Durability)	-	40000	-
H.3(Limits of operation of control functions)	-	40000	-
H.4(Test of the control functions)	-	40000	-
9.4.1(General)	-	18000	-
9.4.2(Immunity)	-	18000	-
9.4.3(Emission)	-	18000	-
9.3.6.3(Dielectric tests)	-	10000	-
B.2(Mechanical durability)	-	40000	-
B.3(Electrical durability)	-	40000	-
F.7.2(Tests on products in a new condition)	-	30000	-
F.7.3(Test after conventional operational performance)	-	30000	-
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	10000	-

Complete

08 Apr, 2024

08 Apr, 2027

Included w.e.f. 05.08.2024 Exclusion: Cl. 9.3.4 (Performance under short-circuit conditions), Cl. 9.3.3.3.8 (Temperature rise of starting resistors for rheostatic rotor starters ), Cl. 9.3.3.3.9 ( Temperature rise of the auto-transformer for two-step auto-transformer starters), Cl. 9.3.4.2.3 (Verification of dielectric Withstand), 8.2.5.2 (Co-ordination at the crossover current between starter and associated SCPD)

IS/IEC 60947 : Part 2 (2016)

Low - Voltage switchgear and controlgear: Part 2 circuit - Breakers (First Revision)

Low-voltage switchgear and control gear;Circuit-breaker

625000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3.4.4(Verification of dielectric withstand)	-	15000	-
8.3.5.4(Verification of dielectric withstand)	-	15000	-
8.3.7.4(Verification of dielectric withstand)	-	15000	-
8.3.7.8(Verification of dielectric withstand)	-	15000	-
8.3.8.6(verification of dielectric withstand (sequence VI))	-	15000	-
8.3.3.4(Mechanical operation and operational performance capability)	-	500000	-
8.3.6.4(verification of temperature-rise (sequence IV))	-	25000	-
8.3.8.7(Verification of temperature-rise)	-	25000	-

Complete

08 Apr, 2024

08 Apr, 2027

Exclusion: Cl.8.3.9 (Critical d.c. load current test), Cl.8.3.7.2 (Short-circuit at the selectivity limit current), Cl.8.3.7.6 ((stage 2) short circuit at 1.1 time the take-over current (sequence V)), Cl.8.3.7.7 (Short-circuit at ultimate short-circuit breaking capacity), Cl.8.3.6.5 (Short-circuit breaking capacity at maximum short-time withstand current), Cl.8.3.6.3 (Rated short-time withstand current), Cl.8.3.8.3 (Rated short-time withstand current)

Bureau of Indian Standards

The National Standards Body of India

GIGA LABS

BEARYS GLOBAL RESEARCH CENTRE, 63/3B, GORVIGERE VILLAGE, BIDARAHALLI HOBLI, BENGALURU, BENGALURU, Bengaluru Rural, Karnataka, 560067

9585514478 vinay.pai@se.com

Scope List