4.1.1 and 6.2.1( Strength of toys other than swings) |
- |
2000 |
|
None |
4.1.2 and A.4.1.2(Maximum height) |
- |
2000 |
|
None |
4.1.3 and A.4.1.3(Corners and edges on moving parts) |
- |
2000 |
|
None |
4.1.3 and A.4.1.3(Corners and edges other than moving parts) |
- |
2000 |
|
None |
4.1.4.1 and 6.7.1 and Fig.6(Protruding parts) |
- |
2000 |
|
None |
4.1.4.2 and 6.7.1 and
Fig.7(All protrusions) |
- |
2000 |
|
None |
4.1.4.3 and 6.7.1 and
Fig.8(Upright protrusions) |
- |
2000 |
|
None |
4.1.4.4 and 6.7.2 (Motion rides) |
- |
2000 |
|
None |
4.1.4.5 and 6.7.1.2 and Fig.9(Slides) |
- |
2000 |
|
None |
4.1.4.5 (Slides) |
- |
2000 |
|
None |
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables) |
- |
2000 |
|
None |
4.1.5 and A.4.1.5.(Climbing and swinging ropes, chains and cables) |
- |
2000 |
|
None |
4.2 and A.4.2.(Barriers-Barriers for platforms from 760 mm to 1 000 mm above the ground) |
- |
2000 |
|
None |
4.2 and A.4.2.(Barriers-Barriers for platforms greater than 1 000 mm and up to 1 830 mm above the ground) |
- |
2000 |
|
None |
4.2 and A.4.2.(Barriers for platforms more than 1 830 mm above the ground) |
- |
2000 |
|
None |
4.2 and A.4.2.(Barriers for platforms from 760 mm to 1 000 mm above the ground shall have a maximum vertical opening of 610 mm between the lowermost member of the barrier and the platform that it surrounds.) |
- |
2000 |
|
None |
4.2 and A.4.2.(Barriers for platforms more than 1 000 mm above the ground shall be designed to minimize the likelihood of climbing. Openings within these barriers or between the barrier and the platform surface shall not permit the passage of the torso probe defined in 6.5.1) |
- |
2000 |
|
None |
4.2 and A.4.2. and 4.6.2 and 4.6.3(For barriers with an uneven top design) |
- |
2000 |
|
None |
4.2 and A.4.2. and 6.3(Dynamic strength of barriers and handrails) |
- |
2000 |
|
None |
4.3(Rung ladders, stepladders and stairways) |
- |
2000 |
|
None |
4.3 a and Fig.10(The rung or tread shall have a substantial horizontal stepping surface with a lateral width of 240 mm or more) |
- |
2000 |
|
None |
4.3 b and Fig.10(The distance between the upper surface of the rungs or treads on rung ladders or stepladders shall not be more than 310 mm and on stairways not more 230 mm when measured vertically in accordance with Figure 10.) |
- |
2000 |
|
None |
4.3 c(The surface of the tread shall not be slippery) |
- |
2000 |
|
None |
4.3 d(The diameter or cross-sectional dimension of the rungs on rung ladders) |
- |
2000 |
|
None |
4.3.e(The depth of treads on stepladders with closed risers or stairways) |
- |
2000 |
|
None |
4.3 f(The inclination of stairways) |
- |
2000 |
|
None |
4.3 f(The inclination of stepladders) |
- |
2000 |
|
None |
4.3 f(The inclination of rung ladders) |
- |
2000 |
|
None |
4.3 g(Stairways and stepladders with a height of 1 200 mm or more above the ground shall be provided with a means of continuous hand support from a height of 760 mm) |
- |
2000 |
|
None |
4.3 g(A means of continuous hand support from a height of 760 mm) |
- |
2000 |
|
None |
4.4.1 (Head and neck entrapment) |
- |
2000 |
|
None |
4.4.2(Entrapment of clothing and hair) |
- |
2000 |
|
None |
4.4.3(Entrapment of feet) |
- |
2000 |
|
None |
4.4.4(Entrapment of fingers) |
- |
2000 |
|
None |
4.5.2(Stability of activity toys with a free height of fall of 600 mm or less) |
- |
2000 |
|
None |
4.5.3(Stability of activity toys with a free height of fall of more than 600 mm) |
- |
2000 |
|
None |
4.6.1 and A.4.6.(Stability of slides) |
- |
2000 |
|
None |
4.6.2 a and A.4.6.(Retaining sides for slides -For slides with a height of more than 1 000 mm above the ground, the height, h, of the retaining sides shall be 100 mm or more) |
- |
2000 |
|
None |
4.6.2 b and A.4.6.(Retaining sides for slides - For slides with a height of 1 000 mm or less above the ground, the height, h, of the retaining sides shall be 50 mm or more.) |
- |
2000 |
|
None |
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have) |
- |
2000 |
|
None |
4.6.3 a and A.4.6.(Starting, sliding and run-out section on slides -The starting section for slides with a height of 1 000 mm or less above the ground shall have) |
- |
2000 |
|
None |
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have) |
- |
2000 |
|
None |
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have) |
- |
2000 |
|
None |
4.6.3 b and A.4.6.(Starting, sliding and run-out section on slides-The starting section for slides with a height of more than 1 000 mm above the ground shall have) |
- |
2000 |
|
None |
4.6.3 c and A.4.6.(Starting, sliding and run-out section on slides) |
- |
2000 |
|
None |
4.6.3 d and A.4.6.(The angle of inclination to the horizontal of the sliding section) |
- |
2000 |
|
None |
4.6.3 e and A.4.6.(The run-out section for the slide) |
- |
2000 |
|
None |
4.6.3 e and A.4.6.(The run-out section for the slide) |
- |
2000 |
|
None |
4.6.3 e and A.4.6.(The run-out section for the slide) |
- |
2000 |
|
None |
4.6.3 f and A.4.6.(The finishing end of the run-out section shall have a radius of 25 mm or more through at least 90°) |
- |
2000 |
|
None |
4.6.4 and A.4.6.(Roller slides) |
- |
2000 |
|
None |
4.6.4 and A.4.6.(Roller slides) |
- |
2000 |
|
None |
4.6.4 and A.4.6.(Roller slides) |
- |
2000 |
|
None |
4.6.4 and A.4.6.(Roller slides) |
- |
2000 |
|
None |
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams) |
- |
2000 |
|
None |
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams) |
- |
2000 |
|
None |
4.7.1.1 and A.4.7.(Stability of swings and other activity toys with crossbeams) |
- |
2000 |
|
None |
4.7.1.2 and A.4.7.(Swings with crossbeams more than 1 200 mm above the ground) |
- |
2000 |
|
None |
4.7.1.3 and A.4.7.(Swings intended for children under 36 months with crossbeams 1 200 mm or less
above the ground) |
- |
2000 |
|
None |
4.7.2 and A.4.7.2(Strength of crossbeams, swing devices, suspension connectors and suspension couplings) |
- |
2000 |
|
None |
4.7.3.1(Swings intended for children under 36 months) |
- |
2000 |
|
None |
4.7.3.1(Swings intended for children under 36 months) |
- |
2000 |
|
None |
4.7.3.2(Toddler swings without a crossbeam) |
- |
2000 |
|
None |
4.7.5(Minimum clearance between swing elements, and similar equipment and adjacent structures) |
- |
2000 |
|
None |
4.7.5(Free swinging elements) |
- |
2000 |
|
None |
4.7.5(Elements excluding free swinging) |
- |
2000 |
|
None |
4.7.6 and A.4.7.6(Lateral stability of swing elements - The minimum distance between the suspension points of a swing measured along the crossbeam) |
- |
2000 |
|
None |
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with flexible means of suspension where the crossbeam height is greater than 1 200 mm) |
- |
2000 |
|
None |
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements with rigid means of suspension where the
crossbeam height is greater than 1 200 mm) |
- |
2000 |
|
None |
4.7.7(Minimum clearance between swing elements and the ground - The seating surface of swing elements where the crossbeam height is 1 200 mm or less) |
- |
2000 |
|
None |
4.7.7(Minimum clearance between swing elements and the ground - Footrests of swing elements) |
- |
2000 |
|
None |
4.7.8 a and A.4.7.8(Suspension connectors and means of suspension) |
- |
4000 |
|
None |
4.7.8 b and A.4.7.8(Suspension connectors and means of suspension) |
- |
4000 |
|
None |
4.7.8 c and A.4.7.8(Ropes used as means of suspension - Diameter ) |
- |
4000 |
|
None |
4.7.8 d and A.4.7.8(Straps and chains - Width) |
- |
4000 |
|
None |
4.7.8 e and A.4.7.8(Suspension connectors and means of suspension) |
- |
4000 |
|
None |
4.7.8 f and A.4.7.8(Suspension connectors and means of suspension) |
- |
4000 |
|
None |
4.8(Seesaws - The central point of the sitting or standing position of the seesaw shall not exceed a height) |
- |
2000 |
|
None |
4.8(Seesaws - The sitting or standing position of the seesaw may swing out of the horizontal) |
- |
2000 |
|
None |
4.9(Carousels and rocking toys) |
- |
2000 |
|
None |
4.9(Free height of fall for carousels and rocking toys) |
- |
2000 |
|
None |
4.10.2 and A.4.10(Inflatable activity toys - Anchorage) |
- |
2000 |
|
None |
4.10.3 and A.4.10(Connection tubes for continuous inflation) |
- |
2000 |
|
None |
4.10.4.1 and A.4.10(Containment - General) |
- |
2000 |
|
None |
4.10.4.2 and A.4.10(Containment walls with a minimum height ) |
- |
2000 |
|
None |
4.10.4.2 and A.4.10(Platforms - Any platform intended for sitting or standing) |
- |
2000 |
|
None |
4.10.4.2 and A.4.10(Permanently roofed Containment walls) |
- |
2000 |
|
None |
4.10.4.3 and A.4.10(Slopes shall be treated as a platform.) |
- |
2000 |
|
None |
4.10.4.3 and A.4.10(The first metre at the top of slopes) |
- |
2000 |
|
None |
4.10.4.3 and A.4.10(The remaining length of slopes greater than 30° that are 760 mm or more above the ground shall be provided with containing walls with a minimum height of 900 mm.) |
- |
2000 |
|
None |
4.10.4.4 and A.4.10(Safe collapse) |
- |
2000 |
|
None |
4.10.4.4 a and A.4.10(When tested in accordance with 6.9 the minimum time taken for the test load to reach its lowest point ) |
- |
2000 |
|
None |
4.10.4.4 b and A.4.10(the opening of any tunnel or squeeze point under any platform shall not be reduced in height by more than 50 % within 30 s.) |
- |
2000 |
|
None |
4.11.1(Paddling pools - General) |
- |
4000 |
|
None |
4.11.2(Edges, points, and small parts) |
- |
4000 |
|
None |
4.11.3(Paddling pools with inflatable walls) |
- |
4000 |
|
None |
5.1(Labelling) |
- |
2000 |
|
None |
5.2(Assembly and installation instructions) |
- |
2000 |
|
None |
5.3(Maintenance instructions) |
- |
2000 |
|
None |
5.4(Warnings) |
- |
2000 |
|
None |