BIS - LIMS (Laboratory Information Management System)

SUNTECH

40-P, TUPUDANA INDUSTRIAL AREA, RANCHI, Ranchi, Jharkhand, 834003

9934148451 sun.tech.lab@gmail.com

Scope List

Reset

4 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 9873 : Part 2 (2017)

Safety of toys: Part 2 flammability (Third Revision)

4500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.2-5.2(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy-Duration of the flame after the removal of the test flame)	-	450	NA
4.2.2(a)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was 150 mm or more)	-	450	NA
4.2.2(b)-5.2(Toys to be worn on the head-Test relating to Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude 50 mm or more from the surface of the toy- if ignition occurs, the maximum burnt length of hair, pile, or material that behaves in a similar manner when the initial length was less than 150 mm)	-	450	NA
4.2.3-5.3(Toys to be worn on the head-Beards, moustaches, wigs, etc. made from hair, pile, or material that behaves in a similar manner to hair (e.g. free-hanging ribbons, paper, cloth strands, or other flowing elements), which protrude less than 50 mm and more than 5 mm from the surface of the toy-Duration of the flame after the removal of the test flame)	-	450	NA
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-Duration of the flame after the removal of the test flame)	-	450	NA
4.2.4-5.3(Toys to be worn on the head-Full or partial moulded head masks-maximum distance between the upper edge of the burnt area and the point of application of the test flame)	-	450	NA
4.2.5-5.4(Toys to be worn on the head-Flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks)-rate of spread of flame)	-	450	NA
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-rate of spread of flame)	-	450	NA
4.3-5.4(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	450	NA
4.3(Toys to be worn on the head-Toy disguise costumes and toys intended to be worn by a child in play)	-	450	NA
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame)	-	450	NA
4.4-5.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child)	-	450	NA
4.4(Toys intended to be entered by a child-rate of spread of flame-Test relating to flowing elements of toys to be worn on the head (except those covered by 4.2.2 and 4.2.3), hoods, headdresses, etc. and masks not covered by 4.2.4 which partially or fully cover the head (e.g. fabric and cardboard masks, eye masks, face masks), toy disguise costumes and toys intended to be entered or worn by a child )	-	450	NA
4.5-5.5(Soft-filled toys-rate of spread of flame )	-	450	NA
4.5-5.5(Soft-filled toys-Test for soft-filled toys )	-	450	NA
4.1(General)	-	450	NA

Complete

Testing charges are capped at Rs 3216 (1.5 times the testing charges of BIS Labs)

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

PPC- FLYASH BASED

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	500	NA
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	400	NA
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	250	NA
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	300	NA
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	250	NA
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	300	NA
7 -Table 2- i(Fineness 4031 Part 2)	-	550	NA
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	550	NA
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	500	NA
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	550	NA
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	550	NA
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	550	NA
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	550	NA

Complete

Exclusion: Table 2 ii) b) Soundness by Autoclave Test Method Table 2 v) Transverse Strength (Optional)

IS 455 (2015)

Portland slag cement - Specification

PORTLAND SLAG CEMENT

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 v(Loss on ignition - Cl 6.2 of IS 4032:1985)	-	750	NA
6 - Table - 1 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985)	-	300	NA
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 6.11 of IS 4032:1985)	-	250	NA
6 - Table - 1 ii(Magnesia - Cl 6.8 of IS 4032:1985)	-	300	NA
6 - Table - 1 i(Insoluble residue - Cl 6.9 of IS 4032:1985)	-	300	NA
7 Table 1 i(Fineness IS 4031(Part 2))	-	550	NA
7 Table 1 ii a(Soundness, Le-Chate1ier expansion IS 4031(Part 3) )	-	550	NA
7 Table 1 iii a(Setting Time ( by Vicat Apparatus ),Initial IS 4031(Part 5))	-	500	NA
7 Table 1 iii b(Setting Time ( by Vicat Apparatus ), Final IS 4031(Part 5))	-	500	NA
7 Table 1 iv a(Compretsive Strenqth .72 ± 1 hr IS 4031(Part 6))	-	500	NA
7 Table 1 iv b(Compretsive Strenqth 168 ± 2 hr IS 4031(Part 6))	-	500	NA
7 Table 1 iv c(Compretsive Strenqth 672 ± 4 hr IS 4031(Part 6))	-	500	NA

Complete

Exclusion: Table 2 ii) b) Soundness by Autoclave Test Method Table 2 v) Transverse Strength (Optional)

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

OPC

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1 Table-2 vi(Loss on ignition)	-	750	NA
6.1 Table-2 iv(Magnesia)	-	300	NA
6.1 Table-2 vii(Chloride content)	-	400	NA
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	250	NA
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	450	NA
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	450	NA
6.1 Table-2 iii.(Insoluble residue)	-	300	NA
7 Table-3 i.(Fineness)	-	500	NA
7 Table-3 ii a(Expansion by Le Chatelier)	-	550	NA
7 Table-3 iii a(Setting Time Initial)	-	500	NA
7 Table-3 iii b(Setting Time Final)	-	500	NA
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	500	NA
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	550	NA
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	500	NA
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	250	NA
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	250	NA
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	250	NA
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	250	NA
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	250	NA

Complete

Exclusion: Table 3 ii) b) Soundness by Autoclave Test Method Table 3 v) Transverse Strength (Optional)

Bureau of Indian Standards

The National Standards Body of India

SUNTECH

40-P, TUPUDANA INDUSTRIAL AREA, RANCHI, Ranchi, Jharkhand, 834003

9934148451 sun.tech.lab@gmail.com

Scope List