BIS - LIMS (Laboratory Information Management System)

HT Product Services Private Limited, Noida

B-78 (Basement, First, Fourth and Fifth Floor) Sector-5, Noida, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9899994387 info@houseoftesting.com

Scope List

Reset

59 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 2185 : Part 3 (1984)

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Physical requirments)	-	1000	-
8.2(Physical requirments-Dimensions-Length)	-	1000	-
8.2(Physical requirments-Dimensions-Height)	-	1000	-
8.2(Physical requirments-Dimensions-Width)	-	1000	-
8.3(Physical requirments- Block density)	-	1000	-
8.4(Physical requirments- Compressive strength)	-	1000	-
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	1000	-
8.4, 9.2 & 11.3(Indivisual Bulk density)	-	1000	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	1000	-
8.3 & 9.1(Indivisual Moisture Content)	-	1000	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	1000	-
3.2 & 8.2(Indivisual Height)	-	1000	-
3.2 & 8.2(Indivisual Width)	-	1000	-
3.2 & 8.2(Indivisual Length)	-	1000	-
3.4(Special Faces)	-	1000	-
3.3(Faces & Arises)	-	1000	-
3.1(Shape)	-	1000	-
8.1.1(General (Exposed wall construction))	-	1000	-
5(MATERIALS)	-	1000	-
7(SURFACE TEXTURE AND FINISH)	-	1000	-
15(Marking)	-	500	-
8.5(Thermal Conductivity)	-	5000	-
8.6( Drying Shrinkage )	-	2000	-
9.3(Thermal Conductivity)	-	5000	-
8.6, 9.4 & 11.5(Grade)	-	1000	-
8(Physical requirments)	-	500	-
8.2(Physical requirments-Dimensions-Length)	-	500	-
8.2(Physical requirments-Dimensions-Height)	-	500	-
8.2(Physical requirments-Dimensions-Width)	-	500	-
8.3(Physical requirments- Block density)	-	1000	-
8.4(Physical requirments- Compressive strength)	-	3000	-
8.4, 9.2 & 11.3(Indivisual Moisture Content)	-	2000	-
8.4, 9.2 & 11.3(Indivisual Bulk density)	-	2000	-
8.4, 9.2 & 11.3 & Table 1(Indivisual Compressive strength)	-	2000	-
8.3 & 9.1(Indivisual Moisture Content)	-	2000	-
8.3 & 9.1 Table 1(Indivisual Block Density)	-	2000	-
3.2 & 8.2(Indivisual Height)	-	2000	-
3.2 & 8.2(Indivisual Width)	-	2000	-
3.2 & 8.2(Indivisual Length)	-	2000	-
3.4(Special Faces)	-	500	-
3.3(Faces & Arises)	-	500	-
3.1(Shape)	-	500	-
8.1.1(General (Exposed wall construction))	-	500	-
5(MATERIALS)	-	1000	-
7(SURFACE TEXTURE AND FINISH)	-	1000	-
15(Marking)	-	500	-
8.5(Thermal Conductivity)	-	2000	-
8.6( Drying Shrinkage )	-	2000	-
9.3(Thermal Conductivity)	-	2000	-
8.6, 9.4 & 11.5(Grade)	-	2000	-

03 Dec, 2026

-
Included w.e.f 09.10.2025

IS 15658 (2021)

Concrete Paving Blocks - Specification ( First Revision )

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 50 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 25 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Visual Rating of specimen after 10 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Cumulative Weight losses of specimen after 10, 25 & 50 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 50 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 25 cycles)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (vi)(Freeze Thaw durability (Weight losses of specimen after 10 cycles)	-	1000	-
Clause 7.3, Annex G(Average Breaking Load)	-	1000	-
Clause 7.3, Annex G(Individual Breaking Load)	-	1000	-
Clause 7.3, Annex F(Average Failure Load per unit Length)	-	1000	-
Clause 7.3, Annex F(Individual Failure Load per unit Length)	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) b)(Average Flexural strength )	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (i))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) b)(Average Tensile splitting strength )	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (i))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) ii)(Wet Abrasion resistance (Average of three test specimens))	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) b) i)( Indivdual Wet Abrasion Resistance )	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) ii)(Dry Abrasion resistance (Average of three test specimens))	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iii) a) i)( Indivdual Dry Abrasion Resistance )	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Compressive strength (Average of eight test specimens))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) a)(Indivdual Compressive strength (i))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) b)(Water absorption (Average of three test specimens))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (i) a)( Indivdual Water absorption)	-	1000	-
Clause 7.2 & 9.1.3, Table 2, SI No. (ix)(Deviation from squareness)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Indivdual Ratio of wearing face area and Plan area (Asw/Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (viii)(Ratio of wearing face area and Plan area (Asw/Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Indivdual Plan Area (Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vii)(Plan Area (Asp))	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Indivdual Thickness of wearing Layer)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (vi)(Thickness of wearing Layer)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Depth)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Depth)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Indivdual Arris/chamfer, Width)	-	500	-
Clause 7.2 & 9.1.3, Table 2, SI No. (v)(Arris/chamfer, Width)	-	500	-
Clause 7.2, Table No. 2, SI No. (iv) (Indivdual Aspect Ratio, L/Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iv) (Aspect Ratio, L/Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Indivdual Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (iii) (Thickness, Th)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Indivdual Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (ii) (Length, L)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Indivdual Width, W)	-	500	-
Clause 7.2, Table No. 2, SI No. (i) (Width, W)	-	500	-
Clause 6.3 (Bonding and Delamination between the layers of paver blocks)	-	500	-
Clause 7.1.3 (Colour and Texture)	-	500	-
Clauses 7.1.2 & 9.1.2 (Visual Inspection)	-	500	-
Clause 7.1.1 (General Quality)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Lower)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Lower)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Individual Width - Higher)	-	500	-
7.2- TABLE-2- (i) IS-15658 (Annex-B)(Average Width -Higher)	-	500	-
Clause 3.20(Spacer nibs)	-	500	-
10(Marking)	-	500	-
cl.5(Cement)	-	500	-
5.2(Mineral Admixture)	-	500	-
5.3(Chemical Admixtures)	-	500	-
5.4(Coarse and Fine Aggregates)	-	500	-
5.5(Pigments)	-	500	-
5.6(Water)	-	500	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Indivdual Compressive strength (ii))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Indivdual Compressive strength - (iii))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Indivdual Compressive strength -(iv))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (ii) b)(Indivdual Compressive strength - (v))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (ii))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (v) a)(Indivdual Flexural strength (iii))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (ii))	-	1000	-
Clause 7.3 & 9.1.4, Table 3, SI No. (iv) a)(Indivdual Tensile splitting strength (iii))	-	1000	-

03 Dec, 2026

-
Included w.e.f 09.10.2025

IS 14268 (2022)

Uncoated stress relieved low relaxation seven-wire (ply) strand for prestressed concrete -Specification (Second Revision)

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.2(Carbon)	-	500	-
4.1.2(Silicon)	-	500	-
4.1.2(Manganese)	-	500	-
4.1.2(Sulphur)	-	500	-
4.1.2(Phosphorus)	-	500	-
4.1.2(Chromium)	-	500	-
4.1.2(Nickel)	-	500	-
4.1.2(Molybdenum)	-	500	-
4.1.2(Copper)	-	500	-
4.1.2(Aluminum)	-	500	-
4.1.2(Sulphur + Phosphorus)	-	1000	-
4.1.2(Boron)	-	500	-
4.1.2(Titanium)	-	500	-
4.1.2(Niobium)	-	500	-
4.1.2(Vanadium)	-	500	-
4.1.2(Titanium+Niobium+Vanadium)	-	1000	-
4.1.2(Nitrogen)	-	1000	-
4.1.3(Wire Description)	-	1000	-
4.1.4(Table 1)(Indentations Description)	-	500	-
4.1.4(Table 1)(Nominal Depth of Oval Type Indentation)	-	1000	-
4.1.4(Table 1)(Length of Oval Type Indentation)	-	1000	-
4.1.4(Table 1)(Spacing Between Oval Type Indentations)	-	1000	-
4.2(Strand Lay Length)	-	1000	-
4.2(Difference In Diameter Of Centre Wire And Surrounding Wire Of Strand)	-	1000	-
4.2(Forming of wire)	-	500	-
4.3(Joints)	-	1000	-
4.5(Workmanship and Finish)	-	1000	-
6(Table 2)(Diameter)	-	1000	-
6(Table 2)(Tensile Strength)	-	2000	-
6(Table 2)(Cross Sectional Area)	-	1000	-
6(Table 2)(Mass Per Meter)	-	1000	-
6(Table 2)(Breaking Load)	-	2000	-
6(Table 2)(0.2 Percent Proof Load)	-	2000	-
6.2.3(Elongation)	-	2000	-
6.3(Straightness of Strand)	-	1000	-
6.4(Behavior During Cutting)	-	1000	-
4.1.2(Carbon)	-	500	-
4.1.2(Silicon)	-	500	-
4.1.2(Manganese)	-	500	-
4.1.2(Sulphur)	-	500	-
4.1.2(Phosphorus)	-	500	-
4.1.2(Chromium)	-	500	-
4.1.2(Nickel)	-	500	-
4.1.2(Molybdenum)	-	500	-
4.1.2(Copper)	-	500	-
4.1.2(Aluminum)	-	500	-
4.1.2(Sulphur + Phosphorus)	-	1000	-
4.1.2(Boron)	-	1000	-
4.1.2(Titanium)	-	1000	-
4.1.2(Niobium)	-	1000	-
4.1.2(Vanadium)	-	1000	-
4.1.2(Titanium+Niobium+Vanadium)	-	1000	-
4.1.2(Nitrogen)	-	1000	-
4.1.3(Wire Description)	-	1000	-
4.1.4(Table 1)(Indentations Description)	-	1000	-
4.1.4(Table 1)(Nominal Depth of Oval Type Indentation)	-	1000	-
4.1.4(Table 1)(Length of Oval Type Indentation)	-	1000	-
4.1.4(Table 1)(Spacing Between Oval Type Indentations)	-	1000	-
4.2(Strand Lay Length)	-	1000	-
4.2(Difference In Diameter Of Centre Wire And Surrounding Wire Of Strand)	-	1000	-
4.2(Forming of wire)	-	1000	-
4.3(Joints)	-	1000	-
4.5(Workmanship and Finish)	-	1000	-
6(Table 2)(Diameter)	-	1000	-
6(Table 2)(Tensile Strength)	-	1000	-
6(Table 2)(Cross Sectional Area)	-	1000	-
6(Table 2)(Mass Per Meter)	-	750	-
6(Table 2)(Breaking Load)	-	2000	-
6(Table 2)(0.2 Percent Proof Load)	-	1000	-
6.2.3(Elongation)	-	1000	-
6.3(Straightness of Strand)	-	1000	-
6.4(Behavior During Cutting)	-	1000	-

03 Dec, 2026

-
Included w.e.f 09.10.2025 Exclusion: Cl 6.2.4 (Relaxation Properties(Relaxation Loss-100h))

IS 17681 (2022)

Specification for Bottled water dispensers

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Construction)	-	10000	-
4.1(General Design)	-	10000	-
4.3(Finish)	-	10000	-
4.4(Thermal Insulation)	-	10000	-
4.5(Hardware)	-	10000	-
4.6(Disposal of Waste Water)	-	10000	-
4.7(Hot Water Tank)	-	10000	-
4.8(Hermetically Sealed Compressor)	-	10000	-
4.9(Protective Guards)	-	10000	-
5(Refrigeration System)	-	10000	-
5.1(Pipes and Connections/Fitting)	-	10000	-
5.2(Control of Operation)	-	10000	-
6.1(General)	-	10000	-
6.1(Protection against electric shock (Cl. 8 of IS 302-2-24))	-	10000	-
6.1(Power Input & Current (Cl. 10 of IS 302-2-24))	-	10000	-
6.1(Temperature Rise/ Heating (Cl. 11 of IS 302-2-24))	-	10000	-
6.1("Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (Cl. 13 of IS 302-2-24)")	-	10000	-
6.1("Moisture Resistance (Cl. 15 of IS 302-2-24)")	-	10000	-
6.1("Insulation resistance and electric strength (After humidity treatment) (Cl. 16 of IS 302-2-24)")	-	10000	-
6.1("Provision For Earthing (Cl. 27 of IS 302-2-24)")	-	10000	-
6.1("Screws & Connections (Cl. 28 of IS 302-2-24)")	-	10000	-
6.2(Electrical Accessories)	-	10000	-
6.3(Salt Mist Test)	-	10000	-
7(Sound pressure level)	-	10000	-
10.1(Cooling Capacity Test)	-	10000	-
10.2(Maximum Operating Condition Test (Environmental))	-	10000	-
10.4(Heating Capacity Test)	-	10000	-
10.5(Annual Energy Consumption Test)	-	10000	-
10.6(Freeze-up Test)	-	10000	-
10.7(Door Opening and Closing Test)	-	10000	-
10.8(Door Seal Test)	-	10000	-
10.9(Pull-down Test)	-	10000	-
11(Marking and instruction)	-	10000	-
10.3(Maximum Operating Condition Test (Voltage))	-	10000	-
4.2(Materials)	-	10000	-
4(Construction)	-	10000	-
4.1(General Design)	-	10000	-
4.3(Finish)	-	10000	-
4.4(Thermal Insulation)	-	10000	-
4.5(Hardware)	-	10000	-
4.6(Disposal of Waste Water)	-	10000	-
4.7(Hot Water Tank)	-	10000	-
4.8(Hermetically Sealed Compressor)	-	10000	-
4.9(Protective Guards)	-	10000	-
5(Refrigeration System)	-	10000	-
5.1(Pipes and Connections/Fitting)	-	10000	-
5.2(Control of Operation)	-	10000	-
6.1(General)	-	10000	-
6.1(Protection against electric shock (Cl. 8 of IS 302-2-24))	-	10000	-
6.1(Power Input & Current (Cl. 10 of IS 302-2-24))	-	10000	-
6.1(Temperature Rise/ Heating (Cl. 11 of IS 302-2-24))	-	10000	-
6.1("Insulation Resistance and Electric Strength/ Leakage Current and Electric Strength (Cl. 13 of IS 302-2-24)")	-	10000	-
6.1("Moisture Resistance (Cl. 15 of IS 302-2-24)")	-	10000	-
6.1("Insulation resistance and electric strength (After humidity treatment) (Cl. 16 of IS 302-2-24)")	-	10000	-
6.1("Provision For Earthing (Cl. 27 of IS 302-2-24)")	-	10000	-
6.1("Screws & Connections (Cl. 28 of IS 302-2-24)")	-	10000	-
6.2(Electrical Accessories)	-	10000	-
6.3(Salt Mist Test)	-	10000	-
7(Sound pressure level)	-	10000	-
10.1(Cooling Capacity Test)	-	10000	-
10.2(Maximum Operating Condition Test (Environmental))	-	10000	-
10.4(Heating Capacity Test)	-	10000	-
10.5(Annual Energy Consumption Test)	-	10000	-
10.6(Freeze-up Test)	-	10000	-
10.7(Door Opening and Closing Test)	-	10000	-
10.8(Door Seal Test)	-	10000	-
10.9(Pull-down Test)	-	10000	-
11(Marking and instruction)	-	10000	-
10.3(Maximum Operating Condition Test (Voltage))	-	10000	-
4.2(Materials)	-	10000	-

03 Dec, 2026

-
Included w.e.f. 15.10.2025

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(CARBON)	-	500	-
Clause - 7.1(SULPHUR)	-	500	-
Clause - 7.1(PHOSPHURS)	-	500	-
Clause - 7.1(MANGANESE)	-	500	-
Clause - 7.1(NITROGEN)	-	500	-
As per Clause 10(Dimension)	-	500	-
As per Clause 10.1(Dimension Width)	-	500	-
As per Clause 10.1(Dimension Thickness)	-	500	-
As per Clause 10.2(Dimension Length)	-	500	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	500	-
As per Clause 11.5(Bend)	-	500	-
As per Clause 11.6(Camber)	-	500	-
As per Clause 11.7 (i)(Out of Square)	-	500	-
As per Clause 11.7 (ii)(Round Corners)	-	500	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	500	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	500	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	500	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	500	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	500	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	500	-
As per Clause 11.7 (ix)(Scarfing pits)	-	500	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	500	-
Clause. 13(Macro examination test.)	-	500	-
Clause. 13(Macro examination test.)	-	500	-
Clause. 13(Sulphur print.)	-	500	-
Clause. 13(Inclusion content)	-	500	-
Clause. 14(Marking)	-	500	-
Clause.15(Ordering information)	-	500	-
Clause.6.0(Manufacture)	-	500	-
Clause.7.1(Silicon)	-	500	-
Clause.7.1(Carbon Equbalant)	-	500	-
Clause.7.1(Microalloy element)	-	500	-

03 Dec, 2026

-
Included w.e.f.11.09.2025

IS 2083 (2024)

FLASHLIGHT- SPECIFICATION (Third Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Materials)	-	2000	-
6(Dimensions)	-	2000	-
8.1.1(Samples for Type Tests)	-	2000	-
8.2(Acceptance Tests)	-	2000	-
8.2(Acceptance Tests)	-	2000	-
8.2.1(Sample for Acceptance Tests)	-	2000	-
8.3(Routine Tests)	-	2000	-
10(TEST FOR MECHANICAL ASSEMBLY)	-	2000	-
11(DROP TEST)	-	2000	-
12.1(Dry Heat Tests)	-	2000	-
12.2(Damp Heat (Accelerated) Test)	-	2000	-
12.3(Dry Cold Test (Optional))	-	2000	-
13(LIFE TEST FOR SWITCH)	-	2000	-
14.1(INSULATION RESISTANCE TEST)	-	2000	-
15(TEST FOR CONTACT RESISTANCE OF THE SWITCH)	-	2000	-
16(LIGHT DISTRIBUTION TEST)	-	2000	-
17(LUMEN DEPRECIATION TEST FOR LED FLASHLIGHT)	-	2000	-
18(CIRCUIT CURRENT OF LED FLASHLIGHT)	-	2000	-
21(TEST FOR INGRESS PROTECTION)	-	2000	-
24(THERMAL TEST)	-	2000	-
7(MARKING)	-	2000	-
19(TEST FOR CHARGING CURRENT IN BUILT-IN RECHARGEABLE BATTERY OPERATED FLASHLIGHTS)	-	2000	-
22(OVER CHARGE PROTECTION IN RECHARGEABLE FLASHLIGHTS WITH BUILT-IN CHARGER/SEPARATE CHARGER/ SOLAR CHARGER)	-	2000	-
24(THERMAL TEST)	-	2000	-

03 Dec, 2026

-
Included w.e.f. 28.08.2025 Exclusion: "9 (TEST FOR FINISH) 20 (PHOTOBIOLOGICAL SAFETY)"

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

Up to 250 Volt and 415 Volt for other appliances

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	500	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
7(Marking)	-	0	-
6(Classification )	-	500	-
6(Classification )	-	0	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	500	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	1000	-
(Cl.11 of 302-2-21:2011)(Heating)	-	0	-
(Cl.11 of 302-2-21:2011)(Heating)	-	0	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	1000	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	0	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	0	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	0	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	1000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	0	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	500	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	100	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	0	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	0	-
(Cl.24ofIS302-221:2011)(Component)	-	0	-
(Cl.24ofIS302-221:2011)(Component)	-	0	-
(Cl.24ofIS302-221:2011)(Component)	-	0	-
(Cl.24ofIS302-221:2011)(Component)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	0	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	500	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	500	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1000	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	0	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	500	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	1000	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	3000	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	1000	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	1000	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	1000	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	1000	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	1000	-
(Cl.22 of IS 2082:2018)(Finish)	-	0	-
Cl.22 of IS 2082:2018(Finish)	-	0	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	0	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	0	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	0	-
Cl.18 of IS 2082:2018( Reheating Time)	-	0	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	0	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	0	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	0	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	0	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	0	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	0	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	0	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	0	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	0	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	0	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	0	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	0	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	0	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	0	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	0	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	0	-
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	0	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	0	-
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	0	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	0	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	0	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	0	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	0	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	0	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	0	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	0	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	0	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	0	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	0	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	0	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	0	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	0	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	0	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	0	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	0	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	0	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	0	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	0	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	0	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	0	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	0	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	0	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	0	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	0	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	0	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	0	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	0	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	0	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	0	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	0	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	0	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	0	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	1000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	0	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	0	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	0	-
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	0	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	0	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	0	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	0	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	0	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	0	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	0	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	0	-
7.14(Marking : Legibility and durability)	-	0	-
7.13(Marking : Official language of Instruction )	-	0	-
7.11(Marking : Indication of controls )	-	0	-
7.8(Marking : Terminals )	-	0	-
7.6(Marking : Symbol used )	-	0	-
7.1(Marking : Warning for Open- outlet )	-	0	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	0	-
7.1(Marking : Statement for a pressure-relief device)	-	0	-
7.1(Marking : Rated capacity)	-	0	-
7.1(Marking : Rated pressure)	-	0	-
7.1(Marking : Country of manufacture)	-	0	-
7.1(Marking: IP Number)	-	0	-
7.1(Marking: Symbol for Class II)	-	0	-
7.1(Marking: Model or type reference)	-	0	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	0	-
7.1(Marking : Rated power input)	-	0	-
7.1(Marking : Symbol for nature of supply )	-	0	-
7.1(Marking : Rated Voltage )	-	0	-
Cl.32 of IS 302-1:2008()	-	0	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
12(THERMOSTAT SETTING)	-	0	-
Cl-10(Mounting of the water heater)	-	0	-
Cl-11(Measurements of stored water temperature)	-	0	-
Cl-12(Thermostat setting)	-	0	-
Cl-13(Measurement of energy consumption)	-	0	-
Cl-14(Verification of the rated capacity)	-	0	-

03 Dec, 2026

-
-

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

Up to 3 liter

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7 of IS 302-2-35:2017(Marking)	-	500	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.6 of IS 302-2-35:2017(Classification)	-	500	-
Cl.6 of IS 302-2-35:2017(Classification)	-	0	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	500	-
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	500	-
Cl.11 of 302-2-35:2017(Heating)	-	1000	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.7 of IS 302-2-35:2017(Marking)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.11 of 302-2-35:2017(Heating)	-	0	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	1000	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	0	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	0	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	1000	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	0	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	1000	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	0	-
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	0	-
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	500	-
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	1000	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	1500	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.22 of IS 302-2-35-2011(Construction )	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	500	-
Cl.24 of IS 302-2-35:2017(Component )	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	500	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	0	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	2000	-
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	500	-
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	0	-
Cl.10 of IS 8978 : 1992(Finish)	-	1000	-
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	1000	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	0	-
Cl.12 of IS 8978 : 1992(Endurance)	-	1000	-
Cl.12 of IS 8978 : 1992(Endurance)	-	0	-
Cl.10 of IS 8978 : 1992(Finish)	-	0	-
Cl.31 of IS 302-2-35: 2017(Resistance to Rusting )	-	0	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	0	-
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	0	-
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	0	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	0	-
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	0	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	0	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	0	-
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	0	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	0	-
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	0	-
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	0	-
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	0	-
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	0	-
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	0	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	0	-
Cl.24 of IS 302-2-35:2017(Component )	-	0	-
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	0	-
Cl.23 of IS 302-2-35:2017(Internal Wiring)	-	0	-
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	0	-
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	0	-
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	0	-
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	0	-
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	0	-
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	0	-
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	0	-
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	0	-
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	0	-
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	0	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	0	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	0	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	0	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	0	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	0	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	0	-
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	0	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	0	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	0	-
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	0	-
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	0	-
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	0	-
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	0	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	0	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	0	-
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	0	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of test corner)	-	0	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Emission of flames, molten metal ,or poisonous or ignitable gas)	-	0	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	0	-
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	0	-
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	0	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	0	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	0	-
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature )	-	0	-
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	0	-
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	0	-
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	0	-
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	0	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	0	-
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	0	-
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	0	-
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	0	-
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	0	-
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	0	-
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	0	-
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	0	-
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	0	-
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	0	-
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTE ON TEST)	-	0	-
Cl-19.11.4.1(Electrostatic discharge)	-	0	-
Cl-19.11.4.2(Radiated Fields)	-	0	-
Cl-19.11.4.3(Fast transient bursts)	-	0	-
Cl-19.11.4.4(Surge Immunity test)	-	0	-
Cl-19.11.4.5(Immunity to conducted discharge)	-	0	-
Cl-19.11.4.6(Voltage dips and interruptions)	-	0	-
Cl-19.11.4.7(Harmonics)	-	0	-

03 Dec, 2026

-
-

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

Up to 250 V0lt

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	500	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	2000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.13 of IS 302-2-201: 2009(Leakage Current & Electric Strength at Operating Temperature)	-	0	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	0	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	0	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	0	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	0	-
Cl.18 of IS 368:2014(Endurance)	-	2500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	500	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	500	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	500	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	500	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	500	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	500	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	500	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	0	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	0	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	500	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(GENERAL REQUIREMENT)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-

03 Dec, 2026

-
-

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

Up to 250V for single phase and 480V for other.

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	0	-
Cl.31(Verification)	-	0	-
Cl.30(Verification)	-	0	-
CL.29(Verification)	-	0	-
Cl.28(Verification)	-	0	-
Cl.27(Verification)	-	0	-
Cl.26(Verification)	-	0	-
Cl.25(Verification)	-	0	-
Cl.24(Verification)	-	0	-
Cl.23(Verification)	-	0	-
Cl.22(Verification)	-	0	-
Cl.21(Verification)	-	0	-
Cl.20(Verification)	-	0	-
Cl.19(Verification)	-	0	-
Cl.17(Verification)	-	0	-
Cl. 16(Verification)	-	0	-
Cl.15(Verification)	-	0	-
Cl.14(Verification)	-	0	-
Cl.13(Verification)	-	0	-
Cl.11(Verification)	-	0	-
Cl.10(Verification)	-	0	-
Cl.8(Verification)	-	0	-
Cl. 7(Verification)	-	0	-
Cl. 7(Verification)	-	0	-
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	0	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	500	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	2000	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	500	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	500	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	500	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	500	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	500	-
Cl. 24 IS 302-2-35(Components)	-	500	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	500	-
Cl. 22 IS 302-2-35(Construction )	-	1500	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	1000	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	500	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	1000	-
Cl. 18 IS 302-2-35(Endurance)	-	0	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	0	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	1000	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	1000	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	0	-
Cl. 11 IS 302-2-35(Heating)	-	1000	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	500	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	0	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	500	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	500	-
Cl. 6 IS 302-2-35(Classification)	-	500	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
4(GENERAL REQUIREMENT)	-	0	-

03 Dec, 2026

-
-

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

Up to 250Volt and others up to 480Volt

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
31.0(Resistance To Rusting)	-	500	-
30.0(Resistance To Heat and Fire)	-	1000	-
29.0(Creepage Distances and Clearances)	-	500	-
28.0(Screws and Connections)	-	500	-
27.0(Provision For Earthing)	-	1000	-
26.0(Terminals for external conductors)	-	500	-
25.0(Supply Connection and External Flexible Cords)	-	1000	-
23.0(Internal Wiring)	-	500	-
22.0(Construction)	-	1000	-
21.0(Mechanical Strength)	-	500	-
20.0(Stability and mechanical hazards)	-	500	-
19.0(Abnormal Operation)	-	1800	-
17.0(Overload Protection of transformer and associated circuit)	-	0	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	-
15.0(Moisture resistance)	-	1000	-
14.0(Transient Overvoltage)	-	0	-
13.0(Leakage Current and electric strength at operating temperature)	-	1000	-
11.0(Heating)	-	1500	-
10.0(Input and Current)	-	1000	-
8.0(Protection against access to live parts)	-	500	-
6.0(Classification)	-	500	-
7.0(Marking and Instructions)	-	500	-
24(Components)	-	0	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-
32(RADIATION TOXICITY AND SIMILAR HAZARDS)	-	0	-

03 Dec, 2026

-
-

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

upto 250V

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	600	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	0	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	800	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1200	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1100	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.11 of IS 302-2201: 2008(Heating)	-	0	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	700	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	900	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1200	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1400	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	0	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	0	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	700	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	0	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	500	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	400	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	0	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	400	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	400	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	600	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	400	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	600	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	0	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	400	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	400	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1200	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	700	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	1000	-
19.11.4.7(Harmonics)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.5(Immunity to conducted discharges)	-	500	-
19.11.4.4(Surge immunity test)	-	1500	-
19.11.4.3(Fast transient bursts)	-	500	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-

03 Dec, 2026

-
-

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

Up to 250 Volt

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against live parts)	-	500	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	1000	-
11(HEATING)	-	1000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1500	-
14(TRANSIENT OVERVOLTAGES)	-	0	-
15(MOISTURE RESISTANCE)	-	1500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	-
18(ENDURANCE)	-	0	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	500	-
21(MECHANICAL STRENGTH)	-	500	-
22(CONSTRUCTION)	-	1450	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	500	-
30(RESISTANCE TO HEAT AND FIRE)	-	1500	-
31(RESISTANCE TO RUSTING)	-	500	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
22.16(Automatic cord reel)	-	0	-
22.47(Water pressure inlet)	-	0	-
22.32(Oxygen bomb for rubber material)	-	0	-
22.106(Interlocks)	-	0	-
22.3(Flexing test)	-	0	-
24(Components)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General requirements)	-	0	-
5(General Conditions of tests)	-	0	-

03 Dec, 2026

-
-

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

Up to 250 Volt for single phase and 480V for others

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	-
7.0(Marking and instructions)	-	500	-
8.0(Protection against access to live part test)	-	1000	-
9.0(Starting of motor-operated appliances test)	-	0	-
10.0(Power Input and current test)	-	1000	-
11.0(Heating test)	-	1500	-
13.0(Leakage current and electric strength test)	-	1000	-
14.0(Transient voltages)	-	500	-
15.0(Moisture Resistance)	-	1000	-
16.0(Leakage current and electric strength test)	-	1000	-
17.0(Overload protection of transformers test)	-	0	-
18.0(Endurance test)	-	0	-
19.0(Abnormal Operations)	-	2000	-
20.0(Stability and Mechanical Hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction verification related tests)	-	500	-
23.0(Internal wiring)	-	500	-
24.0(Components)	-	1000	-
25.0(Supply connections and External Flexible Cords)	-	1000	-
26.0(Terminal for External Conductors)	-	500	-
27.0(Provision for Earthing)	-	1000	-
28.0(Screws and connections)	-	1000	-
29.0(Clearances and Creepage distances and solid insulation)	-	1000	-
30.0(Resistance to heat and fire)	-	1000	-
31.0(Resistance to rusting)	-	1000	-
32.0(Radiation, Toxicity and Similar hazards)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirements)	-	0	-
5(General condition for the tests)	-	0	-

03 Dec, 2026

-
-

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	1000	-
Cl-5(General Conditions for the tests)	-	1000	-
Cl-6(Classification)	-	1000	-
Cl-7(Marking)	-	1000	-
Cl-8(Safety Requirements)	-	1000	-
Cl-9(Endurance fpr motor and base assembly)	-	10000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	2000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	2000	-
Cl-10.4(Idli Batter)	-	2000	-
Cl-10.5(Operational Tests for Juicers)	-	2000	-
Cl-11(Temperature Withstand Test for Bowl)	-	3000	-
Cl-12.1(Test for Switches)	-	1000	-
Cl-13(Strength of Assembly)	-	1000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	1000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	2000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	6000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	1000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	1000	-

03 Dec, 2026

-
-

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General conditions for the tests)	-	500	-
6(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
4(General requirement)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
9(Starting of motor operation test requirements and tests)	-	500	-
10.1(Power input)	-	500	-
10.2(Current input)	-	500	-
11.2(General)	-	500	-
11.4(Heating appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.6(Combined appliances)	-	500	-
11.7(Duration corresponding)	-	500	-
11.8(Temperature rise)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
14(Transient Over Voltages)	-	500	-
15.0(Moisture resistance)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.2(Spillage Test)	-	500	-
15.3(Humidity Test)	-	500	-
16.0(General)	-	500	-
16.1(General)	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
18(Endurance)	-	500	-
19(Abnormal Operation)	-	500	-
20(Stability and mechanical hazards)	-	500	-
20.1(Stability and mechanical hazards)	-	500	-
19.17(Abnormal operation)	-	500	-
21.2(Mechanical strength)	-	500	-
21.3(Mechanical strength)	-	500	-
22.5(Construction)	-	500	-
22(Construction)	-	500	-
22.6(Construction)	-	500	-
22.11(Construction)	-	500	-
22.32(Construction)	-	500	-
22.42(Construction)	-	500	-
23(Internal wiring)	-	500	-
23.3(Internal wiring)	-	500	-
24(Components)	-	500	-
25(Supply connection and external flexible cords)	-	500	-
25.7(Supply connection and external flexible cords)	-	500	-
25.14(Supply connection and external flexible cords)	-	500	-
25.15(Supply connection and external flexible cords)	-	500	-
26(Terminals for external conductors)	-	500	-
26.5(Terminals for external conductors)	-	500	-
27(Provision for earthing)	-	500	-
27.5(Provision for earthing)	-	500	-
28(Screw test and connections)	-	500	-
28.1(Screws and connections)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
30.1(Ball pressure test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.2(Needle Flame Test)	-	500	-
31(Resistance to Rusting)	-	500	-
A.2(Earth continuity test)	-	500	-
B.22.1(Construction)	-	500	-
B.22.3(Construction)	-	500	-
B.22.4(Construction)	-	500	-
B.22.5(Construction)	-	500	-
Annex C(Ageing test on motors)	-	500	-
12(Charging of metal-ion batteries)	-	500	-
18(Endurance)	-	500	-
16(Leakage current and electric strength)	-	500	-
25(Supply connection and external flexible cords)	-	500	-
21(Mechanical Strength)	-	500	-
11.3(Heating)	-	500	-
11.1(General)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
15.2(Moisture resistance)	-	500	-

03 Dec, 2026

-
Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 EMI/EMC Annex D (Thermal motor protectors) Cl 22.16 (Construction) Cl 32 (Radiation Toxicity and Similar Hazards)

IS 302 : Part 2 : Sec 8 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 8 Shavers, Hair Clippers and Similar Appliances (First Revision)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	2000	-
10(Power input and current)	-	4000	-
11(Heating)	-	3000	-
12(Charging of metal-ion batteries)	-	1000	-
13.1 &13.2(Leakage current test)	-	1000	-
13.1 &13.3(Electric strength test)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	5000	-
15.3(Moisture resistance)	-	1000	-
16.1 &16.2(Leakage current test)	-	1000	-
16.1 & 16.3(Electric strength test)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	3000	-
19.101(Abnormal operation)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
21.101(Mechanical strength)	-	1000	-
21.102(Mechanical strength)	-	1000	-
21.103(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
23(Internal wiring)	-	1000	-
24(Components)	-	1000	-
25("Supply connection and external flexible cords")	-	1000	-
26("Terminals for external conductors")	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29("Clearances, creepage distances and solid insulation")	-	1000	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1000	-
32("Radiation, toxicity and similar hazards")	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1- 19.11.4.7(EMI/EMC)

IS 302 : Part 2 : Sec 32 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 32 massage appliances

38000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(CI. 6 IS 302-2-32 : 1994(Classification )	-	1000	-
Cl. 7 302-2-32 : 1994(Marking)	-	1000	-
Cl. 8 302-2-32 : 1994(Starting of motor operated appliances)	-	1000	-
Cl. 9 302-2-32 : 1994(Protection Against Electric Shock)	-	2000	-
Cl. 10 302-2-32 : 1994(Power Input and Current )	-	4000	-
Cl. 11 302-2-32 : 1994(Temperature Rise)	-	2000	-
Cl. 13 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl. 14 302-2-32 : 1994(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 15 302-2-32: 1994(Moisture Resistance Test )	-	5000	-
Cl. 16 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	2000	-
Cl. 17 302-2-32 : 1994(Overload Protection of Transformers and Associated Circuit)	-	2000	-
Cl. 18 302-2-32 : 1994(Endurance)	-	2000	-
Cl. 19 302-2-32 : 1994(Abnormal Operation )	-	3000	-
Cl. 20 302-2-32 : 1994(Stability & Mechanical Hazards)	-	2000	-
Cl. 21 302-2-32 : 1994(Mechanical strength)	-	2000	-
Cl. 22 302-2-32 : 1994(Construction )	-	2000	-
Cl. 23 302-2-32 : 1994(Internal Wiring)	-	2000	-
Cl. 24 302-2-32 : 1994(Components)	-	2000	-
Cl. 25 302-2-32 : 1994(Supply Connection & External Flexible Cords)	-	2000	-
Cl. 26 302-2-32 : 1994(Terminals for External conductors )	-	2000	-
Cl. 27 302-2-32 : 1994(Provision for Earthing )	-	1000	-
Cl. 28 302-2-32 : 1994(Screws & Connections)	-	1000	-
Cl. 29 302-2-32 : 1994(Clearances, Creepage Distances & Solid insulation )	-	1000	-
Cl. 30 302-2-32 : 1994(Resistance to Heat Fire & Tracking )	-	2000	-
Cl. 31 302-2-32 : 1994(Resistance to Rusting)	-	2000	-
Cl. 32 302-2-32 : 1994(Radiation Hazards)	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 2 (1997)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 2 vacuum cleaners and water suction cleaning appliances

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	1000	-
6(Classification)	-	1000	-
7(Marking)	-	1000	-
8(Protection against Access to Live Parts)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
10("Power Input & Current")	-	3000	-
11(Temperature Rise/ Heating)	-	2000	-
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	1000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	500	-
15(MOISTURE RESISTANCE)	-	2000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	1000	-
17(OVERLOAD PROTECTION)	-	1000	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	1000	-
22(Construction)	-	1000	-
23(INTERNAL WIRING)	-	1000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	1000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	1000	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION HAZARDS)	-	500	-
24(COMPONENTS)	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
Clause No - 5.18(linear and angular dimension)	-	1000	-
Clause No - 6.2(harmfull ingress of water)	-	1000	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	1000	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	1000	-
Clause No - 8.2(Addition)	-	1000	-
Clause No - 10.1, Table No. -1(power input deviation)	-	3000	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	1000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	1000	-
Clause No - 14(Impulse test voltage)	-	2000	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	3000	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	1000	-
Clause No -21.1(Mechanical strength)	-	1000	-
Clause No -22.1(construction)	-	1000	-
Clause No -22.11(push force applied)	-	500	-
Clause No -24.1.2(safety isolating transformer)	-	500	-
Clause No -24.1.3(for switches)	-	1000	-
Clause No -24.1.4(for automatic control)	-	1000	-
Clause No -24.1.5(for innterconnection couplers)	-	1000	-
Clause No -24.4(plug and socket)	-	1000	-
Clause No -25.8, Table no -11(conductor resistance)	-	1000	-
Clause No -25.5(dimension for pins)	-	1000	-
Clause No -27.6(for circuit board)	-	1000	-
Clause No -29.2(comparative tracking index)	-	1000	-
Clause No -29.3.3(dry heat test)	-	1000	-
Clause No -30.2.1(glow wire test)	-	1000	-
Clause No -30.101("incorporate combustible material")	-	1000	-
15(MOISTURE RESISTANCE)	-	1000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
18(ENDURANCE)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
31(RESISTANCE TO RUSTING)	-	500	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	-
11(Heating)	-	2000	-
22(CONSTRUCTION)	-	1000	-
24(COMPONENTS)	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 75 (2018)

Safety of Household and Similar Electrical Appliances Part 2 Particular Requirements Section 75 Commercial Dispensing Appliances and Vending Machines

28000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation, toxicity and similar hazards)	-	1000	-
31(Resistance to rusting)	-	1000	-
30.2.4(Resistance to heat and fire)	-	1000	-
30.2(Resistance to heat and fire)	-	1000	-
30.1(Resistance to heat and fire)	-	1000	-
29.3(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
28.2 to 28.4(Screws and connections)	-	1000	-
28.1, Table No.-14(Screws and connections)	-	1000	-
27.6(Provision for earthing)	-	1000	-
27.5(Provision for earthing)	-	1000	-
27.1 to 27.4(Provision for earthing)	-	1000	-
26.10 & 26.11(Terminals for external conductors)	-	1000	-
26.9(Terminals for external conductors)	-	1000	-
26.1 to 26.8(Terminals for external conductors)	-	1000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	1000	-
25.15(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	1000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	1000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	1000	-
25.4(Supply connection and external flexible cords)	-	1000	-
25.3(Supply connection and external flexible cords)	-	1000	-
25.2(Supply connection and external flexible cords)	-	1000	-
25.1(Supply connection and external flexible cords)	-	1000	-
24.101 to 24.103(Components)	-	1000	-
24.2 to 24.6(Components)	-	1000	-
24.1(Components)	-	1000	-
23.101 to 23.102(Internal wiring)	-	1000	-
23.6 to 23.10(Internal wiring)	-	1000	-
23.5(Internal wiring)	-	1000	-
23.4(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	1000	-
23.1 & 23.2(Internal wiring)	-	1000	-
22.101 to 22.114(Constructions)	-	1000	-
22.13 to 22.48(Constructions)	-	1000	-
22.12(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.7 to 22.10(Constructions)	-	1000	-
22.6(Constructions)	-	1000	-
22.5(Constructions)	-	1000	-
22.4(Constructions)	-	1000	-
22.3(Constructions)	-	1000	-
22.2(Constructions)	-	1000	-
22.1(Constructions)	-	1000	-
21.2(MECHANICAL STRENGTH)	-	1000	-
21.1(MECHANICAL STRENGTH)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
19.101 and 19.102(ABNORMAL OPERATION)	-	1000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16.3(Insulation resistance test)	-	1000	-
16.3(Electric strength test)	-	1000	-
16.1 & 16.2(Leakage current test)	-	1000	-
15.102(Moisture resistance)	-	1000	-
15.102(Moisture resistance)	-	1000	-
15.101(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.1(Moisture resistance)	-	1000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1000	-
13.3 and Table No.- 4(Electric strength test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
11.1 to 11.8, Table No.-3(Heating)	-	1000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	1000	-
8.1.5(Protection against access to live parts)	-	1000	-
8.1.4(Protection against access to live parts)	-	1000	-
8.1.3(Protection against access to live parts)	-	1000	-
8.1.2(Protection against access to live parts)	-	1000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	1000	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
31(Resistance to rusting)	-	1000	-
30.2.4(Resistance to heat and fire)	-	1000	-
30.2(Resistance to heat and fire)	-	1000	-
30.1(Resistance to heat and fire)	-	1000	-
29.3(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.2(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
29.1, Table No.- 16, Table No.- 17 & Table No.18(Clearances, creepage distances and solid insulation)	-	1000	-
28.2 to 28.4(Screws and connections)	-	1000	-
28.1, Table No.-14(Screws and connections)	-	1000	-
27.6(Provision for earthing)	-	1000	-
27.5(Provision for earthing)	-	1000	-
27.1 to 27.4(Provision for earthing)	-	1000	-
26.10 & 26.11(Terminals for external conductors)	-	1000	-
26.9(Terminals for external conductors)	-	1000	-
26.1 to 26.8(Terminals for external conductors)	-	1000	-
25.16 to 25.25(Supply connection and external flexible cords)	-	1000	-
25.14(Supply connection and external flexible cords)	-	1000	-
25.9 to 25.13(Supply connection and external flexible cords)	-	1000	-
25.8, Table No.-11(Supply connection and external flexible cords)	-	1000	-
25.5 to 25.7(Supply connection and external flexible cords)	-	1000	-
25.4(Supply connection and external flexible cords)	-	1000	-
25.3(Supply connection and external flexible cords)	-	1000	-
25.2(Supply connection and external flexible cords)	-	1000	-
25.1(Supply connection and external flexible cords)	-	1000	-
24.101 to 24.103(Components)	-	1000	-
24.2 to 24.6(Components)	-	1000	-
24.1(Components)	-	1000	-
23.101 to 23.102(Internal wiring)	-	1000	-
23.6 to 23.10(Internal wiring)	-	1000	-
23.5(Internal wiring)	-	1000	-
23.4(Internal wiring)	-	1000	-
23.3(Internal wiring)	-	1000	-
23.1 & 23.2(Internal wiring)	-	1000	-
22.101 to 22.114(Constructions)	-	1000	-
22.13 to 22.48(Constructions)	-	1000	-
22.12(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.11(Constructions)	-	1000	-
22.7 to 22.10(Constructions)	-	1000	-
22.6(Constructions)	-	1000	-
22.5(Constructions)	-	1000	-
22.4(Constructions)	-	1000	-
22.3(Constructions)	-	1000	-
22.2(Constructions)	-	1000	-
22.1(Constructions)	-	1000	-
21.2(MECHANICAL STRENGTH)	-	1000	-
21.1(MECHANICAL STRENGTH)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
19.101 and 19.102(ABNORMAL OPERATION)	-	1000	-
19.1 to 19.13, Table No. - 9(ABNORMAL OPERATION)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
16.3(Insulation resistance test)	-	1000	-
16.3(Electric strength test)	-	1000	-
16.1 & 16.2(Leakage current test)	-	1000	-
15.102(Moisture resistance)	-	1000	-
15.102(Moisture resistance)	-	1000	-
15.101(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
15.2(Moisture resistance)	-	1000	-
15.1(Moisture resistance)	-	1000	-
14, Table No.- 6 & Table No.-16(Transient over voltages)	-	1000	-
13.3 and Table No.- 4(Electric strength test)	-	1000	-
13.1, 13.2(Leakage current test)	-	1000	-
11.1 to 11.8, Table No.-3(Heating)	-	1000	-
10.1 & 10.2 -Table No. 1, Table No. 2(Power Input and Current)	-	1000	-
8.1.5(Protection against access to live parts)	-	1000	-
8.1.4(Protection against access to live parts)	-	1000	-
8.1.3(Protection against access to live parts)	-	1000	-
8.1.2(Protection against access to live parts)	-	1000	-
8.1, 8.1.1 & 8.2(Protection against access to live parts)	-	1000	-
7.14(Legibility & Durability of Markings test)	-	1000	-
7.1 to 7.13, 7.15, 7.16(Marking)	-	1000	-
25.15(Supply connection and external flexible cords)	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

14000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	1000	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.101(Marking)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.3(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19.2(Abnormal Operation, IS 302-1)	-	1000	-
19.2(Abnormal Operation, IS 302-1)	-	1000	-
19.3(Abnormal Operation, IS 302-1)	-	1000	-
19.3(Abnormal Operation, IS 302-1)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.105.1(Construction)	-	1000	-
22.105.2(Construction)	-	1000	-
22.106(Construction)	-	1000	-
11.107.1(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.101(Components)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.4(Supply Connection and External Flexible Cords)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
22.107(Construction)	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 203 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 203 electric call bells and buzzers for indoor use

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	1000	-
6(Classification)	-	1000	-
7(Marking)	-	1000	-
8(Protection against Access to Live Parts)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
10("Power Input & Current")	-	1000	-
11(Temperature Rise/ Heating)	-	1000	-
12(Operation Under Overload Conditions of Appliances with heating Element)	-	1000	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	-
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	1000	-
15(Moisture Resistance)	-	1000	-
16(Leakage Current and Electric Strength/ Insulation Resistance and Electric Strength (After Humidity treatment))	-	1000	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	-
18(Endurance)	-	1000	-
19(Abnormal Operation)	-	1000	-
20(Stability & Mechanical Hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
23(Internal Wiring)	-	1000	-
24(Components)	-	1000	-
25(Supply Connection & External Flexible Cords)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
27(Provision For Earthing)	-	1000	-
28(Screws & Connections)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
30(Resistance to Heat & Fire)	-	1000	-
31(Resistance to Rusting)	-	1000	-
32(Radiation hazards)	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 80 (2017)

Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision)

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENT)	-	500	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
6.0(Marking and Instructions)	-	500	-
7.0(Classification)	-	500	-
8.0(Protection against access to live parts)	-	500	-
10.0(Input and Current)	-	1500	-
11.0(Heating)	-	2000	-
13.0(Leakage Current and electric strength at operating temperature)	-	500	-
14.0(Transient Overvoltage)	-	1000	-
15.0(Moisture resistance)	-	3000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	500	-
17.0(Overload Protection of transformer and associated circuit)	-	500	-
19.0(Abnormal Operation)	-	1000	-
20.0(Stability and mechanical hazards)	-	500	-
21.0(Mechanical Strength)	-	500	-
22.0(Construction)	-	500	-
23.0(Internal Wiring)	-	500	-
24.0(Components)	-	500	-
25.0(Supply Connection and External Flexible Cords)	-	500	-
26.0(Terminals for external conductors)	-	500	-
27.0(Provision For Earthing)	-	500	-
28.0(Screws and Connections)	-	500	-
29.0(Creepage Distances and Clearances)	-	500	-
30.0(Resistance To Heat and Fire)	-	1000	-
31.0(Resistance To Rusting)	-	1000	-
32.0(Radiation, Toxicity and Similar Hazards)	-	500	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1)	-	500	-
6(Classification- IS 302-1 )	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	500	-
7.101(Marking)	-	500	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	2500	-
11(Heating, IS 302-1)	-	2500	-
11(Heating, IS 302-1)	-	2500	-
11(Heating, IS 302-1)	-	2500	-
11(Heating, IS 302-1)	-	2500	-
11(Heating, IS 302-1)	-	2500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
14(Transient Over Voltages, IS 302-1)	-	500	-
15.1(Moisture Resistance, IS 302-1)	-	2500	-
15.2(Moisture Resistance, IS 302-1)	-	2500	-
15(Moisture Resistance, IS 302-1)	-	2500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	500	-
19.7(Abnormal Operation, IS 302-1)	-	500	-
19.8(Abnormal Operation, IS 302-1)	-	1000	-
19.9(Abnormal Operation, IS 302-1)	-	1000	-
19.1(Abnormal Operation, IS 302-1)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
19.102(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.101(Stability & Mechanical Hazards)	-	1000	-
20.102(Stability & Mechanical Hazards)	-	1000	-
20.103(Stability & Mechanical Hazards)	-	1000	-
20.104(Stability & Mechanical Hazards)	-	1000	-
20.105(Stability & Mechanical Hazards)	-	1000	-
20.106(Stability & Mechanical Hazards)	-	1000	-
20.107(Stability & Mechanical Hazards)	-	1000	-
20.108(Stability & Mechanical Hazards)	-	1000	-
20.109(Stability & Mechanical Hazards)	-	1000	-
20.110(Stability & Mechanical Hazards)	-	1000	-
20.111(Stability & Mechanical Hazards)	-	1000	-
20.112(Stability & Mechanical Hazards)	-	1000	-
20.113(Stability & Mechanical Hazards)	-	1000	-
20.114(Stability & Mechanical Hazards)	-	1000	-
20.115(Stability & Mechanical Hazards)	-	1000	-
20.116(Stability & Mechanical Hazards)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
4(GENERAL REQUIREMENTS)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
27(Provision for Earthing)	-	1000	-
29(Clearances, Creepage distances and Solid Insulation)	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC), Cl 32 (Radiation, Toxicity and similar Hazard IS 302-1)

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification)	-	500	-
7(Marking/ Marking & Instructions)	-	500	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	500	-
9(Starting Of Motor Operated Appliances)	-	500	-
10(Power Input & Current)	-	2500	-
11(Temperature Rise/Heating)	-	2500	-
13(Leakage Current and Electric Strength at Operating Temperature)	-	500	-
14(Transient Over Voltage)	-	500	-
15(Moisture Resistance)	-	2500	-
16(Leakage Current and Electric Strength)	-	500	-
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	500	-
18(Endurance)	-	500	-
19(Abnormal Operation)	-	1500	-
20(Stability & Mechanical Hazards)	-	500	-
21(Mechanical strength)	-	500	-
22(Construction)	-	500	-
23(Internal wiring)	-	500	-
24(Component)	-	1000	-
25(Supply Connection & External Flexible Cables and Cords)	-	500	-
26(Terminals For External Conductors)	-	500	-
27(Provision For Earthing)	-	500	-
28(Screws & Connection)	-	500	-
29(Clearances, Creepage Distances & Solid Insulation)	-	500	-
30(Resistance to Heat & Fire)	-	500	-
31(Resistance to Rusting)	-	250	-
32(Radiation ,Toxicity and similar hazards)	-	250	-
22.32(CONSTRUCTION)	-	500	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 206 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 206 electric coffee makers

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation hazards)	-	1000	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat, Fire and Tracking)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connection)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cables and Cords)	-	1000	-
24(Component)	-	1000	-
23(Internal wiring)	-	1000	-
22(Construction)	-	1000	-
21(Mechanical strength)	-	500	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	1000	-
17(Overload Protection)	-	500	-
16(Insulation resistance and Electric Strength (After humidity treatment))	-	1000	-
15(Moisture Resistance)	-	500	-
14(Radio and television interference suppression/ Transient Overvoltages)	-	1000	-
13(Electrical insulation and Leakage Current at Operating Temperature)	-	1000	-
12(Operation under overload conditions of appliances with heating elements)	-	1000	-
11(Temperature Rise/Heating)	-	1000	-
10(Input)	-	500	-
9(Starting Of Motor Operated Appliances)	-	500	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	-
7(Marking/ Marking & Instructions)	-	500	-
6(Classification)	-	500	-
5(Rating)	-	500	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 4 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 4 spin extractors

36000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENTS)	-	1000	-
4(GENERAL NOTES ON TESTS)	-	1000	-
5(RATING)	-	1000	-
6(CLASSIFICATION)	-	1000	-
7(MARKING)	-	2000	-
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	1000	-
10(INPUT AND CURRENT)	-	3000	-
11(HEATING)	-	3000	-
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	1000	-
15(MOISTURE RESISTANCE)	-	3000	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH (AFTER HUMIDITY TREATMENT))	-	1000	-
17(OVERLOAD PROTECTION)	-	1000	-
19(ABNORMAL OPERATION)	-	1000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	-
21(MECHANICAL STRENGTH)	-	1000	-
22(CONSTRUCTION)	-	1000	-
23(INTERNAL WIRING)	-	1000	-
24(COMPONENTS)	-	1000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	1000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	1000	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-

03 Dec, 2026

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 13 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 13 Deep Fat Fryers, Frying Pans and Similar Appliances (First Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	2000	-
8(Protection against access to live parts)	-	2000	-
10(Power input and current)	-	2000	-
11(Heating)	-	2000	-
13.1 &13.2(Leakage current test)	-	2000	-
13.1 &13.3(Electric strength test)	-	2000	-
14(Transient overvoltages)	-	2000	-
15(Moisture resistance)	-	5000	-
15.3(Moisture resistance)	-	5000	-
15.101(Moisture resistance)	-	5000	-
16.1 &16.2(Leakage current test)	-	2000	-
16.1 & 16.3(Electric strength test)	-	3000	-
17(Overload protection of transformers and associated circuits)	-	3000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	3000	-
19.101 to to 19.102(Abnormal operation)	-	3000	-
20(Stability and mechanical hazards)	-	3000	-
21(Mechanical strength)	-	3000	-
22(Construction)	-	5000	-
22.101(Construction)	-	5000	-
23(Internal wiring)	-	5000	-
24(Components)	-	5000	-
25("Supply connection and external flexible cords")	-	5000	-
26("Terminals for external conductors")	-	5000	-
27(Provision for earthing)	-	5000	-
28(Screws and connections)	-	5000	-
29("Clearances, creepage distances and solid insulation")	-	5000	-
30(Resistance to heat and fire)	-	5000	-
31(Resistance to rusting)	-	5000	-

03 Dec, 2026

-
Included w.e.f.28.07.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7(EMI/EMC) 32(Radiation, toxicity and similar hazards

IS 1258 (2024)

Bayonet lampholders (Fifth Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirements)	-	5000	-
6(Standard ratings)	-	5000	-
7(Classification)	-	5000	-
8(Marking)	-	5000	-
9(Dimensions)	-	5000	-
10(Protection against electric shock)	-	5000	-
11(Terminals)	-	5000	-
12(Provision for earthing)	-	5000	-
13(Construction)	-	5000	-
14(Switched lampholders)	-	5000	-
15(Moisture resistance, insulation resistance and electrical strength)	-	5000	-
16(Mechanical strength)	-	5000	-
17(Screws, current-carrying parts and connections)	-	5000	-
18(Creepage distances and clearances)	-	5000	-
19(General resistance to heat)	-	5000	-
20(Resistance to heat, fire and tracking)	-	5000	-
21(Resistance to excessive residual stresses (season cracking) and to rusting)	-	5000	-
Annex A(Season cracking/corrosion test)	-	5000	-
12.4(Thermal tests)	-	5000	-
9.1(Lampholder dimensions)	-	5000	-
11.2(Terminals)	-	5000	-
12.3(Provision for earthing)	-	5000	-
13.1(Construction)	-	5000	-
13.8(Construction)	-	5000	-
14.4(Switched lampholders)	-	5000	-
15.1(Moisture resistance, insulation resistance and electrical strength)	-	5000	-
16.7(Mechanical strength)	-	5000	-
16.8(Mechanical strength)	-	5000	-
21.2(Resistance to excessive residual stresses (season cracking) and to rusting)	-	5000	-
4(General requirements)	-	5000	-
6(Standard ratings)	-	5000	-
7(Classification)	-	5000	-
8(Marking)	-	5000	-
9(Dimensions)	-	5000	-
10(Protection against electric shock)	-	5000	-
11(Terminals)	-	5000	-
12(Provision for earthing)	-	5000	-
13(Construction)	-	5000	-
14(Switched lampholders)	-	5000	-
15(Moisture resistance, insulation resistance and electrical strength)	-	5000	-
16(Mechanical strength)	-	5000	-
17(Screws, current-carrying parts and connections)	-	5000	-
18(Creepage distances and clearances)	-	5000	-
19(General resistance to heat)	-	5000	-
20(Resistance to heat, fire and tracking)	-	5000	-
21(Resistance to excessive residual stresses (season cracking) and to rusting)	-	5000	-
Annex A(Season cracking/corrosion test)	-	5000	-
12.4(Thermal tests)	-	5000	-
9.1(Lampholder dimensions)	-	5000	-
11.2(Terminals)	-	5000	-
12.3(Provision for earthing)	-	5000	-
13.1(Construction)	-	5000	-
13.8(Construction)	-	5000	-
14.4(Switched lampholders)	-	5000	-
15.1(Moisture resistance, insulation resistance and electrical strength)	-	5000	-
16.7(Mechanical strength)	-	5000	-
16.8(Mechanical strength)	-	5000	-
21.2(Resistance to excessive residual stresses (season cracking) and to rusting)	-	5000	-

03 Dec, 2026

-
Included w.e.f.18.08.2025

Bureau of Indian Standards

The National Standards Body of India

HT Product Services Private Limited, Noida

B-78 (Basement, First, Fourth and Fifth Floor) Sector-5, Noida, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

9899994387 info@houseoftesting.com

Scope List