BIS - LIMS (Laboratory Information Management System)

(Derecognized) National Testing Laboratory Pvt Ltd

Plot No.-83/14,Street No.-1,Opp Metro Piller No.-557,Udyog Nagar, Mundka Industrial Area, DELHI, North West, Delhi, 110041

9582647433 ntldelhi@yahoo.co.in

Scope List

Reset

104 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 1239 : Part 1 (2004)

Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision)

Plain Ended Pipe Only

6550 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Outer Diameter, Thickness & Mass)	-	600	(10% Discount for BIS)
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	2100	(10% Discount for BIS)
Cl 10.1.1(Manufacturing )	-	200	(10% Discount for BIS)
Cl 15(Workmanship)	-	200	(10% Discount for BIS)

-
-

IS 12406 (2021)

Medium density fibre boards for general purpose - Specification

All Grade

8900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clauses 5.2, 9 and 10.2.2(Density)	-	150	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Variation from mean density)	-	150	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Moisture Content)	-	250	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Variation from mean moisture content)	-	250	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Linear expansion (Thickness Swelling in Water) Due to general Absorption after 24h soaking)	-	500	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Internal Bond Strength)	-	750	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Internal Bond strength (i) (After Cyclic test) (ii) (After accelerated water resistance test))	-	750	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Modulus of Rupture a) Avg. Value b) Min. Individual)	-	750	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Modulus of Elasticity a) Avg. Value b) Min. Individual)	-	750	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Screw withdrawl strength (i) Face (ii) Edge (For thickness >12mm))	-	750	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Formaldehyde Content (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	750	(10% Discount for BIS)
Clauses 5.2, 9 and 10.2.2(Steady State Formaldehyde emission (Fc (i) For Formaldehyde Class, E1 (ii) For Formaldehyde Class, E2)	-	1500	(10% Discount for BIS)

-
-

IS 4985 (2000)

Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)

All Grade

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1.2.1(DIMENSIONS-PIPE-Average Thickness)	-	500	(10 % Discount for BIS)
9.1(PIPE ENDS)	-	400	(10 % Discount for BIS)
10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance)	-	200	(10 % Discount for BIS)
10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity)	-	200	(10 % Discount for BIS)
10.3(Effect on Water)	-	500	(10 % Discount for BIS)
10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test)	-	6000	(10 % Discount for BIS)
10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature)	-	1500	(10 % Discount for BIS)
10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density)	-	1000	(10 % Discount for BIS)
Clause 10.7(Sulphated Ash Content)	-	1200	(10 % Discount for BIS)
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets)	-	4000	(10 % Discount for BIS)
11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets)	-	4000	(10 % Discount for BIS)
11.2(Resistance to External Blows at 0°C)	-	1500	(10 % Discount for BIS)

-
-

IS 5509 (2021)

Fire Retardant Plywood - Specification ( Third Revision )

All Grade

9650 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
8.3 (Table 1)(b) 6 mm and above)	-	1000		(10 % Discount for BIS)

-
-

IS 1030 (1998)

Carbon steel castings for general engineering purposes - Specification (Fifth Revision)

All Grade

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CI.13.2, Table-2(Tensile Test)	-	400	(10 % Discount for BIS)
CI.13.2, Table-2(Yield Stress)	-	400	(10 % Discount for BIS)
CI.13.2, Table-2(Elongation)	-	400	(10 % Discount for BIS)
CI.13.4, Table-2(Bend Test)	-	800	(10 % Discount for BIS)
CI.13.3(Impact Test)	-	1500	(10 % Discount for BIS)
CI.13.3(Hydraulic Test)	-	1000	(10 % Discount for BIS)

-
-

IS 952 (2012)

Fog nozzle for fire brigade use - Specification (Second Revision)

All Grade

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Shape and Dimension)	-	400	(10 & Discount for BIS)
5.0(Performance Requirements)	-	1000	(10 & Discount for BIS)
5.2.2(Hydraulic Pressure Test)	-	1000	(10 & Discount for BIS)
6.0(Workmanship and Finish)	-	300	(10 & Discount for BIS)

-
-

IS 902 (1992)

Suction hose couplings for fire fighting purposes - Specification (Third Revision)

All Grade

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Shape and Dimension)	-	1000	(10 & Discount for BIS)
5.0(Construction)	-	300	(10 & Discount for BIS)
5.2(Round Threads for Male Coupling and Nut)	-	300	(10 & Discount for BIS)
5.3(V Thread for Locking Ring and Nut)	-	300	(10 & Discount for BIS)
7.0(Workmanship and Finish)	-	500	(10 & Discount for BIS)
8.0(Performance Requirements)	-	2000	(10 & Discount for BIS)

-
-

IS 926 (1985)

Specification For Fireman's Axe

All Grade

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Carbon)	-	300	(10 & Discount for BIS)
8.3(Manganese)	-	300	(10 & Discount for BIS)
3(Sulphur)	-	300	(10 & Discount for BIS)
2.1(General)	-	200	(10 & Discount for BIS)
4.1(Shape, Dimension & Construction)	-	200	(10 & Discount for BIS)
4.2(Shape, Dimension & Construction)	-	200	(10 & Discount for BIS)
4.3(Shape, Dimension & Construction)	-	200	(10 & Discount for BIS)
5.1(Workmanship and Finish)	-	300	(10 & Discount for BIS)
6.2(Performance Test (Load))	-	1000	(10 & Discount for BIS)
6.3(Insulated Handle)	-	1000	(10 & Discount for BIS)

-
-

IS 11884 (1986)

Specification for fire - Resistant brattice sheeting made from unsupported plastics

All Grade

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Thickness)	-	1000	(10 & Discount for BIS)
3.3(Width)	-	1500	(10 & Discount for BIS)
3.5.1(Breaking Load and elongation at Break)	-	2000	(10 & Discount for BIS)
3.5.2(Tear strength)	-	1000	(10 & Discount for BIS)
3.5.3(Fire Resistance)	-	2000	(10 & Discount for BIS)
3.5.4(Electrical Resistance Test)	-	3000	(10 & Discount for BIS)

-
-

IS 2185 : Part 2 (1983)

Specification for concrete masonry units: Part 2 hollow and solid lightweight concrete blocks (First Revision)

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2(Width)	-	350	(10% discount for BIS)
3.2(Height)	-	350	(10% discount for BIS)
3.2(Length)	-	350	(10% discount for BIS)
8.3(Block Density)	-	1500	(10% discount for BIS)
8.4, Table 1(Compressive strength)	-	7000	(10% discount for BIS)
8.5, Table 1(Water Absorption)	-	1500	(10% discount for BIS)
8.6(Drying shrinkage)	-	3000	(10% discount for BIS)
8.7(Moisture Movement)	-	3000	(10% discount for BIS)

-
-

IS 208 (2020)

Door Handles - Specification ( Sixth Revision )

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(MANUFACTURE- General)	-	300		(10% Discount for BIS)

-
-

IS 318 (1981)

Specification for leaded tin bronze ingots and castings (Second Revision)

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, Table 1.(CHEMlCAL COMPOSITION)	-	5000	(10% Discount for BIS)
4, Table 2.(MECHANICAL PROPERTIES)	-	1500	(10% Discount for BIS)
6(FREEDOM FROM DEFECTS)	-	500	(10% Discount for BIS)
7(SIZE AND SHAPE)	-	500	(10% Discount for BIS)

-
-

IS 456 (2000)

Plain and reinforced concrete - Code of practice (Fourth Revision)

All Grade

1900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.4 (a)(Acidity)	-	200	(10% Discount for BIS)
Cl 5.4 (b)(Alkalinity)	-	200	(10% Discount for BIS)
Cl 5.4 .2(pH)	-	250	(10% Discount for BIS)
5.4-Table-1 (i)-IS: 3025(P-18)(Organic )	-	250	(10% Discount for BIS)
5.4-Table-1 (i)-IS: 3025(P-18)(In-Organic)	-	250	(10% Discount for BIS)
5.4-Table-1 (ii)-IS: 3025(P-24)(Sulphate)	-	250	(10% Discount for BIS)
5.4-Table-1 (iii)-IS: 3025(P-32)(Chloride)	-	250	(10% Discount for BIS)
5.4-Table-1 (v)-IS: 3025(P-17)(Suspended matter)	-	250	(10% Discount for BIS)
16.1(Average Compressive Strength)	-	1100	(10% Discount for BIS)

-
-

IS 15997 (2012)

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

All Grade

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.3(Tensile Test-1608:Part 1)	-	500	-
6(Freedom From Defects)	-	250	-
9.3, Table 3 (Yield Strength, Mpa)	-	500	-
9.3, Table 3 (Tensile Strength, Mpa)	-	500	-
9.3, Table 3 (Elongation, %)	-	500	-

-
-

IS 15911 (2010)

Structural steel (Ordinary Quality) - Specification

All Grade

5750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1, 5.1, 8.1 & 8.2(Carbon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Sulphur: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Phosphorous: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Manganese: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Silicon: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Chromium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Nickel: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Molybdenum: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Copper: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Nitrogen: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Vanadium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Titanium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Niobium: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
Table-1, 5.1, 8.1 & 8.2(Boron: Relevant parts of IS 228 or any other established instrumental/chemical method)	-	200	(10% Discount for BIS)
5 and 10.3.1(Tensile strength. IS 1608)	-	400	(10% Discount for BIS)
5 and 10.3.1(Yield Stress. IS 1608)	-	400	(10% Discount for BIS)
5 and 10.3.1(Percentage Elongation. . IS 1608)	-	400	(10% Discount for BIS)
11.3( Bend Test. IS 1599)	-	750	(10% Discount for BIS)

-
-

IS 15834 (2008)

Stainless Steel Sliding Door Bolts For Use With Padlocks -specification

All Grade

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.2(Carbon Content)	-	200	(10% Discount for BIS)
Clause 4.2(Sulphur)	-	200	(10% Discount for BIS)
Clause 4.2(nickel)	-	200	(10% Discount for BIS)

-
-

IS 15833 (2009)

Stainless Steel Tower Bolts -specification

All Grade

7200 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.2(Carbon Content)	-	200	(10% Discount for BIS)
Clause 4.2(Sulphur)	-	200	(10% Discount for BIS)
Clause 4.2(Phosphorus)	-	200	(10% Discount for BIS)
Clause 4.2(Manganese)	-	200	(10% Discount for BIS)
Clause 4.2(Silicon)	-	200	(10% Discount for BIS)
Clause 4.2(Chromium)	-	200	(10% Discount for BIS)
Clause 4.2(nickel)	-	200	(10% Discount for BIS)
Cl 6(DIMENSIONS)	-	1000	(10% Discount for BIS)
Cl 7(0)	-	200	(10% Discount for BIS)
Cl 3(NOMINAL SIZES)	-	500	(10% Discount for BIS)

-
-

IS 15801 (2008)

Polypropylene - Random copolymer pipes for hot and cold water supplies - Specification

All Grade

58000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Dimensions Of Pipes)	-	500	(10% Discount for BIS)
Cl 8(Visual Appearance)	-	500	(10% Discount for BIS)
Cl 9.2(Fusion Compatibility)	-	1500	(10% Discount for BIS)
Cl 9.3(Reversion Test )	-	1000	(10% Discount for BIS)
Cl 9.4 & Annex B(Impact Strength)	-	2500	(10% Discount for BIS)
Cl 9.5(Density)	-	750	(10% Discount for BIS)
Cl 9.6(Melt Flow Rate)	-	1000	(10% Discount for BIS)
Cl 9.7(Carbon Black Content & Dispersion)	-	2000	(10% Discount for BIS)
Cl 9.8(Thermal Stability By Hydrostatic Pressure Testing)	-	30000	(10% Discount for BIS)
Cl 9.9(Opacity)	-	750	(10% Discount for BIS)

-
-

IS 15683 (2018)

Portable Fire Extinguishers — Performance and Construction — Specification ( First Revision )

Except for classD fire and Except fire performance test

21050 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 5.3.1(Filling Requirements)	-	400	(10% Discount for BIS)
Cl. 5.3.2(Filling Requirements)	-	200	(10% Discount for BIS)
Cl. 5.3.3(Capacities)	-	300	(10% Discount for BIS)
Cl. 6(PRESSURE REQUIREMENTS FOR LOW PRESSURE EXTINGUISHERS)	-	300	(10% Discount for BIS)
Cl. 7.3(Resistance to Temperature changes)	-	300	(10% Discount for BIS)
Cl 7.4.3( Leakage Test)	-	300	(10% Discount for BIS)
Cl 7.5.1(Impact Resistance Test)	-	300	(10% Discount for BIS)
Cl 7.5.2(Vibration Resistance Test)	-	300	(10% Discount for BIS)
Cl 7.7(Tapping Test)	-	300	(10% Discount for BIS)
Cl 7.8(Intermittent Discharge Test)	-	300	(10% Discount for BIS)
Cl 9.2.2(Burst Test)	-	300	(10% Discount for BIS)
Cl 9.2.3(Crushing Test)	-	300	(10% Discount for BIS)
Cl 9.2.4(Pressure Cycling Test)	-	300	(10% Discount for BIS)
Cl 9.3(Carrying Handle)	-	300	(10% Discount for BIS)
Cl 9.8(Hose Assemblies)	-	300	(10% Discount for BIS)
Cl 9.9 - Table 10(Method of Operation)	-	300	(10% Discount for BIS)
Cl 9.10(Safety-Locking Devices)	-	300	(10% Discount for BIS)
Cl 9.12(Dip-Tubes and Filters — Water-Based Extinguishers)	-	300	(10% Discount for BIS)

-
-

IS 15658 (2006)

Precast concrete blocks for paving - Specification

All Grade

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1.2(Physical requirement)	-	9500	(10% Discount for BIS)
6.2.1 & 7.1(VISUAL INSPECTION)	-	100	(10% Discount for BIS)
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	200	(10% Discount for BIS)
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	200	(10% Discount for BIS)
B-1.3.1(MEAN INDIVIDUAL WIDTH (of all eight test specimens), W)	-	200	(10% Discount for BIS)
B-5(AVERAGE WIDTH (Average for eight test specimens), W)	-	200	(10% Discount for BIS)
B-1.3.1(MEAN INDIVIDUAL LENGTH (of all eight test specimens), L)	-	300	(10% Discount for BIS)
B-5(AVERAGE LENGTH (Average for eight test specimens), L)	-	300	(10% Discount for BIS)
Table 1(MINIMUM PAVER BLOCK THICKNESS)	-	300	(10% Discount for BIS)
B-1.3.2(MEAN INDIVIDUAL THICKNESS (of all eight test specimens), T)	-	300	(10% Discount for BIS)
B-2.3(INDIVIDUAL ARRIS/CHAMFER (of all eight test specimens))	-	300	(10% Discount for BIS)
B-5(INDIVIDUAL WEARING FACE AREA, Asw (of all eight test specimens))	-	300	(10% Discount for BIS)
B-5(INDIVIDUAL PLAN AREA, ASP (of all eight test specimens) )	-	300	(10% Discount for BIS)
B- 4.3(MEAN INDIVIDUAL SQUARENESS (of all eight test specimens) )	-	300	(10% Discount for BIS)
6.2.4(WATER ABSORPTION TEST (Average for three test specimens))	-	300	(10% Discount for BIS)
6.2.5(AVERAGE COMPRESSIVE STRENGTH (Average for eight test specimens) )	-	300	(10% Discount for BIS)
6.2.6(ABRASION RESISTANCE, Dry Condition (For all eight test specimens))	-	300	(10% Discount for BIS)
6.2.6(ABRASION RESISTANCE, Wet Condition (For all eight test specimens))	-	300	(10% Discount for BIS)
6.2.7(INDIVIDUAL TENSILE SPLITTING STRENGTH (Individual strength of eight test specimen ))	-	300	(10% Discount for BIS)
6.2.8(INDIVIDUAL FLEXURAL STRENGTH (Individual strength of eight test specimen ))	-	300	(10% Discount for BIS)
B-5(AVERAGE THICKNESS (Average for eight test specimens), T)	-	500	(10% Discount for BIS)
B-5(AVERAGE ASPECT RATIO (L/T) (for eight test specimens))	-	500	-
B-5(AVERAGE ARRIS/CHAMFER (for eight test specimens))	-	500	-
B-5(AVERAGE WEARING FACE AREA, Asw (for eight test specimens))	-	500	-
B-5(AVERAGE SQUARENESS (for eight test specimens))	-	500	-
6.2.3(THICKNESS OF WEARING LAYER, if the sample is Double Layered (for eight test specimens))	-	500	-
6.2.7(AVERAGE TENSILE SPLITTING STRENGTH (for eight test specimen ))	-	500	-
6.2.8(AVERAGE FLEXURAL STRENGTH (Average strength of eight test specimen ))	-	500	-

-
-

IS 15647 (2006)

Hot rolled steel narrow width strip for welded tubes and pipes

All Grade

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
Cl 8(UTM)	-	500		-

-
-

IS 15328 (2003)

Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems -

All Grade

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1,6.1.1 IS 12235 (Part 1) Table 1(Dimension of Pipes: Mean outside Diameter, dem)	-	300	(10% Discount for BIS)
6.1.2 IS 4985 Table 2(Wall Thickness, e )	-	100	(10% Discount for BIS)
6.1.3 (Length of Pipe)	-	100	(10% Discount for BIS)
7.3 IS 1223S ( Part 2)(Vicat Softening Temperature When determined according to IS 1223S ( Part 2), shall not be lessthan 79°C.)	-	750	(10% Discount for BIS)
7.4 IS 1223S ( Part 5)(Longitudinal Reversion: When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent. The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.)	-	750	(10% Discount for BIS)
8.1 Annex B(Resistance to External Blows at 0ºC: When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.)	-	750	(10% Discount for BIS)
8.2 Annex C Table 5(Ring Stiffness: When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5)	-	750	(10% Discount for BIS)
8.3 IS 12235 ( Part 8/ Sec 1 ) Table 6(Resistance to internal Hydrostatic Pressure(Type Test) a) Acceptance Test:(1h at 27 0 C) )	-	750	(10% Discount for BIS)
10(Performance requirements)	-	4000	(10% Discount for BIS)
7.2(Colour )	-	200	(10% Discount for BIS)
10.1.1 Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints)	-	300	(10% Discount for BIS)
10.1.2 Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints)	-	500	(10% Discount for BIS)
10.2.1(Internal hydrostatic pressure test for solvent cemented Joints)	-	300	(10% Discount for BIS)
10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints)	-	300	(10% Discount for BIS)
'7.5 (amdt.7)(Effect on Water (Type test))	-	8000	(10% Discount for BIS)

-
-

IS 15058 (2002)

PVC water - Stops at transverse contraction joints for use in masonry and concrete dams - Specification

All Grade

6350 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.2 Table 1, i) IS 13360 (Part 5/Sec 1)(Tensile strength)	-	500	(10% Discount for BIS)
3.2 Table 1, ii) IS 13360 (Part 5/Sec 1)(Elongation,)	-	500	(10% Discount for BIS)
3.2 Table 1, iii) IS 13360 (Part 5/Sec 11)(Hardness (Shore A))	-	600	(10% Discount for BIS)
3.2 Table 1, iv) Annex A(Water absorption)	-	500	(10% Discount for BIS)
3.2 Table 1, v) Annex G of IS 9766(Cold bend temperature at which samples does not crack)	-	600	(10% Discount for BIS)
3.2 Table 1,vi) b) Annex B(Accelerated extraction test: Elongation)	-	1000	(10% Discount for BIS)
3.2 Table 1,vii) f) Annex C(Stability in effects of alkalies test Dimension change)	-	1900	(10% Discount for BIS)

-
-

IS 14735 (1999)

Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System -

All Grade

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Colour of fittings)	-	200	(10% Discount for BIS)
11(Design requirements)	-	300	(10% Discount for BIS)
12.1(Visual appearance)	-	1000	(10% Discount for BIS)
16(Mechanical Properties)	-	2500	(10% Discount for BIS)
8(Sealing Rings)	-	750	(10% Discount for BIS)
10(Workmanship)	-	250	(10% Discount for BIS)
12.2(Stress relief test)	-	1000	(10% Discount for BIS)
12.3(Vicat softening tempewrature)	-	1000	(10% Discount for BIS)
Cl.13, IS 12235 (P-7)-2004, (Resistance to Sulphuric Acid)	-	1000	(10% Discount for BIS)
Cl.14, Annex A(Titanium Di-Oxide Content)	-	1000	(10% Discount for BIS)
Cl.15, Annex B(Sulphated Ash Content)	-	500	(10% Discount for BIS)
16.1(Impact test)	-	2500	(10% Discount for BIS)
17(Watet tightness of joint)	-	1000	(10% Discount for BIS)

-
-

IS 14650 (1999)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling purposes - Specificaation

All Grade

6600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Carbon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Manganese- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Silicon- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
12(Sulphur Print Tests )	-	200	(10% Discount for BIS)
6(Nickel- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Chromium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Molybdenum- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Copper- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Vanadium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Titanium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Niobium- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
6(Nitrogen- Relevant parts of IS 228 or any other established instrumental /Chemical method)	-	200	(10% Discount for BIS)
12(Macro-examination )	-	2000	(10% Discount for BIS)
9 & 10(Dimensions and Tolerances )	-	500	(10% Discount for BIS)
11(Freedom from Defects )	-	500	(10% Discount for BIS)

-
-

IS 14333 (1996)

High Density Polyethylene Pipe For Sewerage -

All Grade

8850 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Colour)	-	200	(10% Discount for BIS)
8.3(Density)	-	500	(10% Discount for BIS)
8.4(Melt Flow Rate)	-	750	(10% Discount for BIS)
Cl. 8.5, IS 2530-1963, Cl. 10(Cabon Black Content)	-	1500	(10% Discount for BIS)
Cl. 8.5, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	1500	(10% Discount for BIS)
6(Dimensions of pipes)	-	1400	(10% Discount for BIS)
7(Visual Appearance)	-	200	-

-
-

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

Except Optional Test

9800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	600	10% Discount for BIS
4.1(Phase/Street Lighting conductor)	-	200	(10% Discount for BIS)
4.2(Messenger (Neutral Conductor or Otherwise))	-	200	(10% Discount for BIS)
5.1(Insulation)	-	200	(10% Discount for BIS)
6.1(Flexibility class)	-	150	(10% Discount for BIS)
6.3(Protective barrier)	-	200	(10% Discount for BIS)
6.4(size of street lighting conductor)	-	200	(10% Discount for BIS)
6.5(Size of messenger conductor )	-	200	(10% Discount for BIS)
6.6(Direction of outer layer)	-	200	(10% Discount for BIS)
7.1(Insulation)	-	200	(10% Discount for BIS)
7.2( Thickness of insulation)	-	200	(10% Discount for BIS)
7.3(Tolerance on thickness of insulation )	-	200	(10% Discount for BIS)
7.4(Aplication of the insulation )	-	200	(10% Discount for BIS)
7.5(Colour of the insulation )	-	200	(10% Discount for BIS)
8.1(Core identification)	-	200	(10% Discount for BIS)
8.3(Identification by other means)	-	200	(10% Discount for BIS)
9.1(Assembly (Laying up))	-	200	(10% Discount for BIS)
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	150	(10% Discount for BIS)
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	200	(10% Discount for BIS)
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	200	(10% Discount for BIS)
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	200	(10% Discount for BIS)
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	200	(10% Discount for BIS)
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	200	(10% Discount for BIS)
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	200	(10% Discount for BIS)
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	200	(10% Discount for BIS)
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	200	(10% Discount for BIS)
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	200	(10% Discount for BIS)
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	200	(10% Discount for BIS)
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	200	(10% Discount for BIS)
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	200	(10% Discount for BIS)
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	200	(10% Discount for BIS)
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	200	(10% Discount for BIS)
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	200	(10% Discount for BIS)
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	200	(10% Discount for BIS)
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	200	(10% Discount for BIS)
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	200	(10% Discount for BIS)
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	200	(10% Discount for BIS)
10.1 g)(High voltage test - IS10810:Part 45)	-	200	(10% Discount for BIS)
11.4(Bending Test on the Completed Cable ( Optional) )	-	200	(10% Discount for BIS)

-
-

IS 14151 : Part 2 (2008)

Irrigation equipment - Sprinkler pipes - Specification: Part 2 quick coupled polyethylene pipes and fittings (Second Revision)

All Grade

13000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	1500	(10% Discount for BIS)
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	1500	(10% Discount for BIS)
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	500	(10% Discount for BIS)
7.2.1 (Visual and Workmanship Requirement)	-	200	(10% Discount for BIS)
4.1 (a)( Quick Coupled Male and Female Couplers)	-	150	(10% Discount for BIS)
Cl 4.1.5(Rubber rings- A)Shore hardness (Shore-A))	-	150	(10% Discount for BIS)
Cl.6.1.3(Weldability Test- a) Quality test)	-	150	(10% Discount for BIS)
Cl.6.1.3(Weldability Test- b) Acceptance test)	-	200	(10% Discount for BIS)
6.1.1, 6.1.1.1(Leakage Test)	-	100	(10% Discount for BIS)
6.1.2, 6.1.2.1( Hydraulic Proof Test)	-	150	(10% Discount for BIS)

-
-

IS 14151 : Part 1 (1999)

Irrigation equipment - Sprinkler pipes - Specification: Part 1 polyethylene pipes (First Revision)

All Grade

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.6(Melt now Rate (MFR))	-	600	(10% Discount for BIS)
(Cl.7.5)(Density)	-	400	(10% Discount for BIS)
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	600	(10% Discount for BIS)
(Cl.4.2)(Carbon black- b) Dispersion of carbon black)	-	600	(10% Discount for BIS)
Cl.5(Dimensions of pipe - i) Outside diameter)	-	400	(10% Discount for BIS)
Cl.5(Dimensions of pipe - ii) Wall thickness maximum)	-	400	(10% Discount for BIS)
Cl 7.1(Hydraulic Characteristics - Acceptance test)	-	7500	(10% Discount for BIS)
Cl.7.2)(Reversion Test)	-	1500	(10% Discount for BIS)
Cl.7.3(Tensile Test- i) Tensile Strength)	-	1500	(10% Discount for BIS)
Cl.7.4(Fusion Compatibility Test- a) Quality test)	-	600	(10% Discount for BIS)
6.1(VISUAL APPEARANCE)	-	200	(10% Discount for BIS)
(Cl.4.2)(Carbon black- a)carbon content)	-	200	(10% Discount for BIS)

-
-

IS 13801 (2013)

Chequered Cement Concrete Tiles -

All Grade

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(Cl 7, 8 &9)(Length, Breadth, Thickness, Difference in length of side between the longest side and shorterst side in the sample shall not exceed 1 mm, Half tiles, Difference in Thickness between the thickest and thinnest tile in the sample shall not exceed 10 percent of minimum thickness, Depth of chequred groove, Thickness of wearing layer.)	-	500	(10% Discount for BIS)
Cl 12.4(Water absorption)	-	500	(10% Discount for BIS)
Cl 12.5(Wet transverse strength)	-	1000	(10% Discount for BIS)
Cl 12.6(Resistance to wear)	-	1000	(10% Discount for BIS)

-
-

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

(Derecognized) National Testing Laboratory Pvt Ltd

Plot No.-83/14,Street No.-1,Opp Metro Piller No.-557,Udyog Nagar, Mundka Industrial Area, DELHI, North West, Delhi, 110041

9582647433 ntldelhi@yahoo.co.in

Scope List