BIS - LIMS (Laboratory Information Management System)

INDIAN JUTE INDUSTRIES' RESEARCH ASSOCIATION, KOLKATA

17, Taratala Road, Kolkata, Kolkata, West Bengal, 700088

9051395612 director.office@ijira.org.in

Scope List

Reset

3 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 16186 (2014)

Textiles - Light weight jute sacking bags for packing 50 kg foodgrains - Specification

B Twill Bag

10900 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Manufacture- IS16186)	-	100	-
4.1(Fabric)	-	100	-
4.1(i)The bags shall be made from single piece of 2/1 twill weave jute sacking of uniform construction with warp running along the length of the bag. )	-	100	-
4.1(ii) The mass per square meter of sacking used in the fabric of the bag 504 g.)	-	750	-
4.2(Seam-IS 9113 (Cl.5.1.2))	-	100	-
4.2.i)( Type of stitches Herakle )	-	100	-
4.2.ii)( Jute twine for stitches Two strands of 3-ply )	-	100	-
4.2.iii)( Stitches/dm 10 ± 1 )	-	200	-
4.2.iv)(Tex of jute twine [ IS 9113 (Cl.5.1.2) ] 310 tex.X 3-ply )	-	300	-
4.3(Union Safety Stitch-IS 9113 (Cl.5.1.2))	-	100	-
4.3.i)( Stitches/dm 10 ± 1 )	-	225	-
4.3.ii)(Tex of jute twine )	-	900	-
4.3( 310 tex.X 2-ply )	-	300	-
4.5(Freedom from defects)	-	500	-
4.4(Hemming at the mouth-IS 9113 (Cl.5.1.2))	-	100	-
4.4(Fabric shall be hemmed with jute yarn of 310 tex )	-	100	-
4.5, Annex A(GAW)	-	100	-
4.5, Annex A(Multiple broken/missing warp(end)-Two or more contiguous, regardless of length )	-	100	-
4.5, Annex A(Multiple broken weft(pick))	-	100	-
4.5, Annex A(Cut, hole, tear or patch-Two or more warp thread ruptured at adjoining points )	-	100	-
4.5, Annex A(Float-Fabric where warp and weft yarns escape)	-	100	-
4.5, Annex A(Gap stitching-Stitching missing)	-	100	-
4.5, Annex A(Corner gap-Hole formation due to improper stitching at the corner of the bag )	-	100	-
4.5, Annex A(Mildew-Staining of fabric due to fungal or bacterial growth visible to naked eye)	-	100	-
4.1 & 5.1, Table 1(Dimension-IS 9113 (Cl.8.3.2))	-	375	-
4.1 & 5.1, Table 1(Outside Length, cm )	-	200	-
4.1 & 5.1, Table 1(Outside Width, cm )	-	200	-
4.1 & 5.1, Table 1(Ends /dm-IS 9113 (Cl.8.4.2))	-	375	-
4.1 & 5.1, Table 1(Picks/dm-IS 9113 (Cl.8.4.2))	-	375	-
4.1 & 5.1, Table 1(Corrected Mass/Bag,g-IS 9113 (Cl.8.5.2))	-	300	-
4.1 & 5.1, Table 1(Average Breaking Strength in N)	-	300	-
4.1 & 5.1, Table 1(Warpway -IS 9113 (Cl.8.6.2))	-	750	-
4.1 & 5.1, Table 1(Weftway-IS 9113 (Cl.8.6.2))	-	750	-
4.1 & 5.1, Table 1(Average Seam Strength in N-IS 9113 (Cl.8.7))	-	900	-
4.1 & 5.1, Table 1(Moisture Regain, Percent-IS 9113 (Cl.8.2))	-	500	-
4.1 & 5.1, Table 1(Oil content, Percent-IS 9113 (Cl.8.5.2))	-	1000	-

05 Jun, 2028

-
-

IS 4355 (1977)

Specification for fire-resistant brattice cloth (first revision)

9250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.3.2 Length and width (The length and width of finshed fabric shall be as agreed between the purchase and the supplier .A Tolerance of - 5% shall be alowed on width)	-	375	-
Cl.3.4.1 Fire Resistance (b) After the burner flame has been removed neither the mean persistence time of the flame on any one test piece shall exceed 10 sec)	-	1000	-
Cl.3.4.1 Fire Resistance (When tested in accordance with the methood prescribed in Appendix A, the following conditions shall be full filled a) The flame or the glow of the material at any time during the test shall not extend above the marker wire)	-	1000	-
Cl.3.4.1 Fire Resistance (c) After the burner flame has been removed neither the mean persistence time of the glow on 6 test pieces shall exceed 10 seconds nor the persistence time of the glow on any one test piece shall not exceed 30 seconds )	-	1000	-
Cl.3.4.2(The breaking load of the brattice cloth for wrapway and weftway shall not be leass than 40 Kgf and 20 Kgf respectiveely when tested in accordance with IS 1969-1068 on a specimen of 5 cm width)	-	1500	-
Cl.3.4.3 Accelerated weathering test(The breaking load of the brattice cloth for wrapway and weftway after storage in a humidity chamber maintained at 70 ±1 ˚C and 100 percent relatively humidity for 7 days shall be not less than 20 Kgf and 10 Kgf respectively (see.3.4.2) on a specimen of 5 cm width)	-	3000	-
Cl.3.2 Length and width (The length and width of finshed fabric shall be as agreed between the purchase and the supplier .A Tolerance of - 5% shall be alowed on width)	-	500	-
Cl.3.4.4 Air Permeability (The air Permiability of the materials shall be not more than 10.0 m³/min/m² at a pressure of 10 mm water guage when tested in accordance with method given in Appendix B )	-	750	-
Cl.3.4.1 Fire Resistance (When tested in accordance with the methood prescribed in Appendix A, the following conditions shall be full filled a) The flame or the glow of the material at any time during the test shall not extend above the marker wire)	-	50	-
Cl.3.4.1 Fire Resistance (b) After the burner flame has been removed neither the mean persistence time of the flame on any one test piece shall exceed 10 sec)	-	50	-
Cl.3.4.1 Fire Resistance (c) After the burner flame has been removed neither the mean persistence time of the glow on 6 test pieces shall exceed 10 seconds nor the persistence time of the glow on any one test piece shall not exceed 30 seconds )	-	50	-
Cl.3.4.2(The breaking load of the brattice cloth for wrapway and weftway shall not be leass than 40 Kgf and 20 Kgf respectiveely when tested in accordance with IS 1969-1068 on a specimen of 5 cm width)	-	0	-
Cl.3.4.3 Accelerated weathering test(The breaking load of the brattice cloth for wrapway and weftway after storage in a humidity chamber maintained at 70 ±1 ˚C and 100 percent relatively humidity for 7 days shall be not less than 20 Kgf and 10 Kgf respectively (see.3.4.2) on a specimen of 5 cm width)	-	0	-
Cl.3.4.4 Air Permeability (The air Permiability of the materials shall be not more than 10.0 m³/min/m² at a pressure of 10 mm water guage when tested in accordance with method given in Appendix B )	-	0	-
Cl.3.2 Length and width (The length and width of finshed fabric shall be as agreed between the purchase and the supplier .A Tolerance of - 5% shall be alowed on width)	-	0	-
Cl.3.4.1 Fire Resistance (When tested in accordance with the methood prescribed in Appendix A, the following conditions shall be full filled a) The flame or the glow of the material at any time during the test shall not extend above the marker wire)	-	0	-
Cl.3.4.1 Fire Resistance (b) After the burner flame has been removed neither the mean persistence time of the flame on any one test piece shall exceed 10 sec)	-	0	-
Cl.3.4.1 Fire Resistance (c) After the burner flame has been removed neither the mean persistence time of the glow on 6 test pieces shall exceed 10 seconds nor the persistence time of the glow on any one test piece shall not exceed 30 seconds )	-	0	-
Cl.3.4.2(The breaking load of the brattice cloth for wrapway and weftway shall not be leass than 40 Kgf and 20 Kgf respectiveely when tested in accordance with IS 1969-1068 on a specimen of 5 cm width)	-	0	-
Cl.3.4.3 Accelerated weathering test(The breaking load of the brattice cloth for wrapway and weftway after storage in a humidity chamber maintained at 70 ±1 ˚C and 100 percent relatively humidity for 7 days shall be not less than 20 Kgf and 10 Kgf respectively (see.3.4.2) on a specimen of 5 cm width)	-	0	-
Cl.3.4.4 Air Permeability (The air Permiability of the materials shall be not more than 10.0 m³/min/m² at a pressure of 10 mm water guage when tested in accordance with method given in Appendix B )	-	0	-
Cl.3.2 Length and width (The length and width of finshed fabric shall be as agreed between the purchase and the supplier .A Tolerance of - 5% shall be alowed on width)	-	0	-
Cl.3.4.1 Fire Resistance (b) After the burner flame has been removed neither the mean persistence time of the flame on any one test piece shall exceed 10 sec)	-	0	-
Cl.3.4.1 Fire Resistance (When tested in accordance with the methood prescribed in Appendix A, the following conditions shall be full filled a) The flame or the glow of the material at any time during the test shall not extend above the marker wire)	-	0	-
Cl.3.4.1 Fire Resistance (c) After the burner flame has been removed neither the mean persistence time of the glow on 6 test pieces shall exceed 10 seconds nor the persistence time of the glow on any one test piece shall not exceed 30 seconds )	-	0	-
Cl.3.4.2(The breaking load of the brattice cloth for wrapway and weftway shall not be leass than 40 Kgf and 20 Kgf respectiveely when tested in accordance with IS 1969-1068 on a specimen of 5 cm width)	-	0	-
Cl.3.4.3 Accelerated weathering test(The breaking load of the brattice cloth for wrapway and weftway after storage in a humidity chamber maintained at 70 ±1 ˚C and 100 percent relatively humidity for 7 days shall be not less than 20 Kgf and 10 Kgf respectively (see.3.4.2) on a specimen of 5 cm width)	-	0	-
Cl.3.2 Length and width (The length and width of finshed fabric shall be as agreed between the purchase and the supplier .A Tolerance of - 5% shall be alowed on width)	-	0	-
Cl.3.4.4 Air Permeability (The air Permiability of the materials shall be not more than 10.0 m³/min/m² at a pressure of 10 mm water guage when tested in accordance with method given in Appendix B )	-	0	-
Cl.3.4.1 Fire Resistance (When tested in accordance with the methood prescribed in Appendix A, the following conditions shall be full filled a) The flame or the glow of the material at any time during the test shall not extend above the marker wire)	-	0	-
Cl.3.4.1 Fire Resistance (b) After the burner flame has been removed neither the mean persistence time of the flame on any one test piece shall exceed 10 sec)	-	0	-
Cl.3.4.1 Fire Resistance (c) After the burner flame has been removed neither the mean persistence time of the glow on 6 test pieces shall exceed 10 seconds nor the persistence time of the glow on any one test piece shall not exceed 30 seconds )	-	0	-
Cl.3.4.2(The breaking load of the brattice cloth for wrapway and weftway shall not be leass than 40 Kgf and 20 Kgf respectiveely when tested in accordance with IS 1969-1068 on a specimen of 5 cm width)	-	0	-
Cl.3.4.3 Accelerated weathering test(The breaking load of the brattice cloth for wrapway and weftway after storage in a humidity chamber maintained at 70 ±1 ˚C and 100 percent relatively humidity for 7 days shall be not less than 20 Kgf and 10 Kgf respectively (see.3.4.2) on a specimen of 5 cm width)	-	0	-
Cl.3.4.4 Air Permeability (The air Permiability of the materials shall be not more than 10.0 m³/min/m² at a pressure of 10 mm water guage when tested in accordance with method given in Appendix B )	-	0	-
Cl.3.2 Length and width (The length and width of finshed fabric shall be as agreed between the purchase and the supplier .A Tolerance of - 5% shall be alowed on width)	-	0	-
Cl.3.4.1 Fire Resistance (When tested in accordance with the methood prescribed in Appendix A, the following conditions shall be full filled a) The flame or the glow of the material at any time during the test shall not extend above the marker wire)	-	0	-
Cl.3.4.1 Fire Resistance (b) After the burner flame has been removed neither the mean persistence time of the flame on any one test piece shall exceed 10 sec)	-	0	-
Cl.3.4.1 Fire Resistance (c) After the burner flame has been removed neither the mean persistence time of the glow on 6 test pieces shall exceed 10 seconds nor the persistence time of the glow on any one test piece shall not exceed 30 seconds )	-	0	-
Cl.3.4.2(The breaking load of the brattice cloth for wrapway and weftway shall not be leass than 40 Kgf and 20 Kgf respectiveely when tested in accordance with IS 1969-1068 on a specimen of 5 cm width)	-	0	-
Cl.3.4.3 Accelerated weathering test(The breaking load of the brattice cloth for wrapway and weftway after storage in a humidity chamber maintained at 70 ±1 ˚C and 100 percent relatively humidity for 7 days shall be not less than 20 Kgf and 10 Kgf respectively (see.3.4.2) on a specimen of 5 cm width)	-	0	-
Cl.3.4.4 Air Permeability (The air Permiability of the materials shall be not more than 10.0 m³/min/m² at a pressure of 10 mm water guage when tested in accordance with method given in Appendix B )	-	0	-
Cl.3.2 Length and width (The length and width of finshed fabric shall be as agreed between the purchase and the supplier .A Tolerance of - 5% shall be alowed on width)	-	0	-
Cl.3.4.1 Fire Resistance (b) After the burner flame has been removed neither the mean persistence time of the flame on any one test piece shall exceed 10 sec)	-	0	-
Cl.3.4.1 Fire Resistance (When tested in accordance with the methood prescribed in Appendix A, the following conditions shall be full filled a) The flame or the glow of the material at any time during the test shall not extend above the marker wire)	-	0	-
Cl.3.4.1 Fire Resistance (c) After the burner flame has been removed neither the mean persistence time of the glow on 6 test pieces shall exceed 10 seconds nor the persistence time of the glow on any one test piece shall not exceed 30 seconds )	-	0	-
Cl.3.4.2(The breaking load of the brattice cloth for wrapway and weftway shall not be leass than 40 Kgf and 20 Kgf respectiveely when tested in accordance with IS 1969-1068 on a specimen of 5 cm width)	-	0	-
Cl.3.4.3 Accelerated weathering test(The breaking load of the brattice cloth for wrapway and weftway after storage in a humidity chamber maintained at 70 ±1 ˚C and 100 percent relatively humidity for 7 days shall be not less than 20 Kgf and 10 Kgf respectively (see.3.4.2) on a specimen of 5 cm width)	-	0	-
Cl.3.2 Length and width (The length and width of finshed fabric shall be as agreed between the purchase and the supplier .A Tolerance of - 5% shall be alowed on width)	-	0	-
Cl.3.4.4 Air Permeability (The air Permiability of the materials shall be not more than 10.0 m³/min/m² at a pressure of 10 mm water guage when tested in accordance with method given in Appendix B )	-	0	-
Cl.3.4.1 Fire Resistance (When tested in accordance with the methood prescribed in Appendix A, the following conditions shall be full filled a) The flame or the glow of the material at any time during the test shall not extend above the marker wire)	-	0	-
Cl.3.4.1 Fire Resistance (b) After the burner flame has been removed neither the mean persistence time of the flame on any one test piece shall exceed 10 sec)	-	0	-
Cl.3.4.1 Fire Resistance (c) After the burner flame has been removed neither the mean persistence time of the glow on 6 test pieces shall exceed 10 seconds nor the persistence time of the glow on any one test piece shall not exceed 30 seconds )	-	0	-
Cl.3.4.2(The breaking load of the brattice cloth for wrapway and weftway shall not be leass than 40 Kgf and 20 Kgf respectiveely when tested in accordance with IS 1969-1068 on a specimen of 5 cm width)	-	0	-
Cl.3.4.3 Accelerated weathering test(The breaking load of the brattice cloth for wrapway and weftway after storage in a humidity chamber maintained at 70 ±1 ˚C and 100 percent relatively humidity for 7 days shall be not less than 20 Kgf and 10 Kgf respectively (see.3.4.2) on a specimen of 5 cm width)	-	0	-
Cl.3.4.4 Air Permeability (The air Permiability of the materials shall be not more than 10.0 m³/min/m² at a pressure of 10 mm water guage when tested in accordance with method given in Appendix B )	-	0	-
Cl.3.2 Length and width (The length and width of finshed fabric shall be as agreed between the purchase and the supplier .A Tolerance of - 5% shall be alowed on width)	-	0	-
Cl.3.4.1 Fire Resistance (When tested in accordance with the methood prescribed in Appendix A, the following conditions shall be full filled a) The flame or the glow of the material at any time during the test shall not extend above the marker wire)	-	0	-
Cl.3.4.1 Fire Resistance (b) After the burner flame has been removed neither the mean persistence time of the flame on any one test piece shall exceed 10 sec)	-	0	-
Cl.3.4.1 Fire Resistance (c) After the burner flame has been removed neither the mean persistence time of the glow on 6 test pieces shall exceed 10 seconds nor the persistence time of the glow on any one test piece shall not exceed 30 seconds )	-	0	-
Cl.3.4.2(The breaking load of the brattice cloth for wrapway and weftway shall not be leass than 40 Kgf and 20 Kgf respectiveely when tested in accordance with IS 1969-1068 on a specimen of 5 cm width)	-	0	-
Cl.3.4.3 Accelerated weathering test(The breaking load of the brattice cloth for wrapway and weftway after storage in a humidity chamber maintained at 70 ±1 ˚C and 100 percent relatively humidity for 7 days shall be not less than 20 Kgf and 10 Kgf respectively (see.3.4.2) on a specimen of 5 cm width)	-	0	-
Cl.3.4.4 Air Permeability (The air Permiability of the materials shall be not more than 10.0 m³/min/m² at a pressure of 10 mm water guage when tested in accordance with method given in Appendix B )	-	0	-

05 Jun, 2028

-
Included w.e.f. 19.09.2025 Exclusion: "Cl.3.3.1 (The treatmen of base fabric) Cl.3.3.2 (Uniformity test of treated base fabric) Cl.3.3.3 (treated fabric durability test) Cl.3.3.4 (Odour and Skin irritation test) Cl.3.4.5 (Electrical resistance test)"

IS 14715 : Part 1 (2016)

Jute geotextiles Part 1 Strengthening of sub-grade in roads – Specification (second revision)

33600 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1(Weight at 20% moisture Regain- IS 14716)	-	750	-
1(Width- IS 1954)	-	150	-
1(Ends × Picks- IS 1963)	-	750	-
1(Tensile strength in MD × CD- IS 13162 (Part 5))	-	2500	-
1("Elongation at break in MD × CD- IS 13162 (Part 5)")	-	2500	IT IS DONE ALONG WITH TENSILE STRENGTH
1(Puncture resistance- IS 16078)	-	2100	-
1(Burst strength- IS 1966 (Part 1))	-	900	-
1(Permittivity at 50mm constant head- IS 14324)	-	1200	-
1(Apparent opening size (A. O. S.) , O95- IS 14294)	-	1500	-
2(Elongation at break MD * CD - IS 15891 (Part 3))	-	1500	-
2(Permittivity at 50 mm constant head- IS 14324)	-	1200	-
2(Bursting strength- IS 1966 (Part 1))	-	900	-
2(Apparent opening size (A. O. S.), O95- IS 14294)	-	1500	-
1(Weight at 20 percent moisture regain- IS 14716)	-	750	-
4, Table 1, (i)(Construction)	-	300	-
4, Table 1, (ii)(Weight at 20 percent moisture regain, g/m2 for Woven Jute Geotextiles)	-	750	-
4, Table 1, (iii)(Width cm, for Woven Jute Geotextiles)	-	150	-
4, Table 1, (iv)(Ends X Picks/ dm, for Woven Jute Geotextiles)	-	750	-
4, Table 1, (v)(Thickness at 2kPA, mm, for Woven Jute Geotextiles)	-	375	-
4, Table 1, (vi)(Tensile strength in MD × CD, kN/m, Min, for Woven Jute Geotextiles)	-	2500	-
4, Table 1, (vii)(Elongation at break in MD × CD, for Woven Jute Geotextiles)	-	2500	-
4, Table 1, (viii)(Puncture resistance, kN, Min, for Woven Jute Geotextiles)	-	2100	-
4, Table 1, (ix)(Burst strength, kPa, Min, for Woven Jute Geotextiles)	-	900	-
4, Table 1, (x)(Permittivity at 50mm constant head, sec -1 , Min, for Woven Jute Geotextiles)	-	1200	-
4, Table 2, (i)(Width, cm, for Non-Woven Jute Geotextiles)	-	150	-
4, Table 2, (ii)(Mass, g/m2, for Non-Woven Jute Geotextiles)	-	750	-
4, Table 2, (iii)(Thickness at 2 kPa, mm, for Non-Woven Jute Geotextiles)	-	375	-
4, Table 2, (v)(Elongation at break, percent, for Non-Woven Jute Geotextiles)	-	1500	-
4, Table 2, (vi)(Permittivity at 50 mm constant head, sec–1 , Min, for Non-Woven Jute Geotextiles)	-	1200	-
4, Table 2, (vii)(Bursting strength, kPa, Min, for Non-Woven Jute Geotextiles)	-	900	-
4, Table 2, (viii)(Apparent opening size (A. O. S.), O 95 , Micron, for Non-Woven Jute Geotextiles)	-	1500	-
5(Sampling)	-	1000	10/ROLL
4, Table 1, (xi)(Apparent opening size (A. O. S.) , O 95 , Micron, for Woven Jute Geotextiles)	-	1500	-
4, Table 2, (iv)(Tensile strength, kN/m, Min, for Non-Woven Jute Geotextiles)	-	1500	-

05 Jun, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

INDIAN JUTE INDUSTRIES' RESEARCH ASSOCIATION, KOLKATA

17, Taratala Road, Kolkata, Kolkata, West Bengal, 700088

9051395612 director.office@ijira.org.in

Scope List