BIS - LIMS (Laboratory Information Management System)

BCH Electric Limited, Faridabad

20/4, Mathura road, Faridabad, Faridabad, Haryana, 121006

9891014805 sushil.kumar@bchindia.com

Scope List

Reset

8 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS/IEC 60947 : Part 5 : Sec 1 (2009)

Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)

Limit Switch, Foot Switch, Push Button, Control relay

1205000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3.3(Emission)	-	0	Testing facility not available
8.3.3.3(Temperature rise )	-	25000	Internal products test
8.3.3.4(Dielectric properties)	-	50000	Internal products test
8.2.4 of IS/IEC 60947-1(Mechanical properties of Terminal)	-	40000	Internal products test
8.3.3.5.2( Making and breaking capacities of switching elements under normal conditions)	-	70000	Internal products test
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	40000	Internal products test
8.3.3.5.5 b)( Dielectric verification)	-	25000	Internal products test
8.3.4.1(Performance under conditional short-circuit current)	-	70000	Internal products test
Annex C of IEC 60947-1(Degree of protection of enclosed control circuit devices)	-	30000	Internal products test
8.2.5(Verification of actuation force or moment)	-	20000	Internal products test
7.1.3(Measurement of clearances and creepage distances, if applicable)	-	10000	Internal products test
C.3(Electrical durability)	-	50000	Internal products test
8.3.3.5.5 b)(Dielectric verification)	-	20000	Internal products test
8.3.3.5.5 b)(Dielectric verification)	-	20000	Internal products test
C.2(Mechanical durability)	-	50000	Internal products test
H.8.1 f)(Impulse voltage withstand test)	-	15000	Internal products test
H.8.5(Making and breaking capacities)	-	40000	Internal products test
Annex C(No. of operations)	-	20000	Internal products test
C.1.2(Observation)	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.2(Terminal identification and marking)	-	20000	Internal products test
5.2.3(Functional markings )	-	10000	Internal products test
5.2.4(Emergency stop)	-	10000	Internal products test
5.2.5(Operating diagram)	-	10000	Internal products test
5.2.5.1( Position indication )	-	10000	Internal products test
5.2.5.2( Terminal markings for operating diagrams)	-	10000	Internal products test
5.2.6(Time delay markings)	-	10000	Internal products test
5.3(Instructions for installation, operation and maintenance)	-	20000	Internal products test
5.4(Additional information)	-	20000	Internal products test
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	40000	Internal products test
8.3.4.3(Test circuit and test quantities)	-	20000	Internal products test
8.3.4.4 a)(Condition of the switching element after the test )	-	15000	Internal products test
8.3.4.4 b)(Condition of the switching element after the test )	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.1.5(Special tests)	-	0	Testing facility not available
G.8.1.1(Pull test)	-	15000	Testing facility not available
G.8.1.2(Torque test)	-	20000	Internal products test
G.8.1.4(Bend test)	-	0	Testing facility not available
F.8.1.2.3(Rapid change of temperature test)	-	0	Testing facility not available
F 8.1.2.4(Impact test)	-	0	Testing facility not available
F 8.1.2.6(Dielectric test after stresses)	-	15000	Internal products test
H.8.2(Voltage drop test)	-	0	Testing facility not available
H.8.4(OFF-state current)	-	0	Testing facility not available
7, J.7(Constructional requirements)	-	20000	Internal products test
G.8.1.3(Push test)	-	0	Testing facility not available
H.8.6(Performance under short circuit current conditions)	-	40000	Internal products test
J.7.1.12(Indicator lights with built-in transformers)	-	0	Testing facility not available
J.8.3.3.4(Dielectric test)	-	15000	Internal products test
J.8.3.3.4.3(Dielectric test (indicator lights with built-in transformers))	-	15000	Internal products test
J.8.4.2(Indirect support mounting)	-	10000	Internal products test
H.8.7(Verification of electromagnetic compatibility)	-	0	Testing facility not available
J.8.3.3.3(Temp-rise tests)	-	25000	Internal products test
K 8.3.5(Mechanical operation at limits of temperature)	-	25000	Internal products test
K 8.3.7(Test Sequence VIII Verification of robustness of actuating system)	-	0	Testing facility not available
K 8.3.4(Performance under conditional shortcircuit current)	-	40000	Internal products test
L 8.4 (a)(Test of NC contact)	-	0	Testing facility not available
L 8.4 (b)(Test of NO contact)	-	0	Testing facility not available
7.1 & 8.2(Constructional requirements)	-	15000	Internal products test
7.3.1(General)	-	10000	Internal products test
7.3.2(Immunity)	-	0	Testing facility not available
J.8.3.4(Short Circuit test (on built-in transformers, if any))	-	0	Testing facility not available
J.8.4.1.2(Shock)	-	0	Testing facility not available
J.8.4.1.3(Vibration)	-	0	Testing facility not available
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)(Verification of direct opening action)	-	0	Testing facility not available
8.3.3.2(Operating limits of contactor relays )	-	30000	Internal products test
7(Constructional requirements)	-	10000	Internal products test
J.8.5(Degree of protection for indicating towers)	-	0	Testing facility not available
7.3.3(Emission)	-	0	Testing facility not available
8.3.3.3(Temperature rise )	-	25000	Internal products test
8.3.3.4(Dielectric properties)	-	50000	Internal products test
8.2.4 of IS/IEC 60947-1(Mechanical properties of Terminal)	-	40000	Internal products test
8.3.3.5.2( Making and breaking capacities of switching elements under normal conditions)	-	70000	Internal products test
8.3.3.5.3(– Making and breaking capacities of switching elements under abnormal conditions )	-	40000	Internal products test
8.3.3.5.5 b)( Dielectric verification)	-	25000	Internal products test
8.3.4.1(Performance under conditional short-circuit current)	-	70000	Internal products test
Annex C of IEC 60947-1(Degree of protection of enclosed control circuit devices)	-	30000	Internal products test
8.2.5(Verification of actuation force or moment)	-	20000	Internal products test
7.1.3(Measurement of clearances and creepage distances, if applicable)	-	10000	Internal products test
C.3(Electrical durability)	-	50000	Internal products test
8.3.3.5.5 b)(Dielectric verification)	-	20000	Internal products test
8.3.3.5.5 b)(Dielectric verification)	-	20000	Internal products test
C.2(Mechanical durability)	-	50000	Internal products test
H.8.1 f)(Impulse voltage withstand test)	-	15000	Internal products test
H.8.5(Making and breaking capacities)	-	40000	Internal products test
Annex C(No. of operations)	-	20000	Internal products test
C.1.2(Observation)	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.1( Marking : General )	-	10000	Internal products test
5.2.2(Terminal identification and marking)	-	20000	Internal products test
5.2.3(Functional markings )	-	10000	Internal products test
5.2.4(Emergency stop)	-	10000	Internal products test
5.2.5(Operating diagram)	-	10000	Internal products test
5.2.5.1( Position indication )	-	10000	Internal products test
5.2.5.2( Terminal markings for operating diagrams)	-	10000	Internal products test
5.2.6(Time delay markings)	-	10000	Internal products test
5.3(Instructions for installation, operation and maintenance)	-	20000	Internal products test
5.4(Additional information)	-	20000	Internal products test
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	40000	Internal products test
8.3.4.3(Test circuit and test quantities)	-	20000	Internal products test
8.3.4.4 a)(Condition of the switching element after the test )	-	15000	Internal products test
8.3.4.4 b)(Condition of the switching element after the test )	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.2.6( Verification of limitation of rotation of a rotary switch)	-	15000	Internal products test
8.1.5(Special tests)	-	0	Testing facility not available
G.8.1.1(Pull test)	-	15000	Testing facility not available
G.8.1.2(Torque test)	-	20000	Internal products test
G.8.1.4(Bend test)	-	0	Testing facility not available
F.8.1.2.3(Rapid change of temperature test)	-	0	Testing facility not available
F 8.1.2.4(Impact test)	-	0	Testing facility not available
F 8.1.2.6(Dielectric test after stresses)	-	15000	Internal products test
H.8.2(Voltage drop test)	-	0	Testing facility not available
H.8.4(OFF-state current)	-	0	Testing facility not available
7, J.7(Constructional requirements)	-	20000	Internal products test
G.8.1.3(Push test)	-	0	Testing facility not available
H.8.6(Performance under short circuit current conditions)	-	40000	Internal products test
J.7.1.12(Indicator lights with built-in transformers)	-	0	Testing facility not available
J.8.3.3.4(Dielectric test)	-	15000	Internal products test
J.8.3.3.4.3(Dielectric test (indicator lights with built-in transformers))	-	15000	Internal products test
J.8.4.2(Indirect support mounting)	-	10000	Internal products test
H.8.7(Verification of electromagnetic compatibility)	-	0	Testing facility not available
J.8.3.3.3(Temp-rise tests)	-	25000	Internal products test
K 8.3.5(Mechanical operation at limits of temperature)	-	25000	Internal products test
K 8.3.7(Test Sequence VIII Verification of robustness of actuating system)	-	0	Testing facility not available
K 8.3.4(Performance under conditional shortcircuit current)	-	40000	Internal products test
L 8.4 (a)(Test of NC contact)	-	0	Testing facility not available
L 8.4 (b)(Test of NO contact)	-	0	Testing facility not available
7.1 & 8.2(Constructional requirements)	-	15000	Internal products test
7.3.1(General)	-	10000	Internal products test
7.3.2(Immunity)	-	0	Testing facility not available
J.8.3.4(Short Circuit test (on built-in transformers, if any))	-	0	Testing facility not available
J.8.4.1.2(Shock)	-	0	Testing facility not available
J.8.4.1.3(Vibration)	-	0	Testing facility not available
Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices (First Revision)(Verification of direct opening action)	-	0	Testing facility not available
8.3.3.2(Operating limits of contactor relays )	-	30000	Internal products test
7(Constructional requirements)	-	10000	Internal products test
J.8.5(Degree of protection for indicating towers)	-	0	Testing facility not available

05 Jun, 2028

-
-

IS/IEC 60947 : PART 3 (2020)

Low-Voltage Switchgear and Controlgear: Part 3 Switches Disconnectors Switch-Disconnectors and Fuse-Combination Units

I MCB SOLATOR, MCCB ISOLATOR SWITCH, SWITCH DISCONNECTORS, FUSE COMBINATION

820000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(General)	-	2000	Only for internal testing
4(Classification)	-	2000	Only for internal testing
5.3.2(Rated voltages)	-	2000	Only for internal testing
5.3.2.1(Rated operational voltage)	-	2000	Only for internal testing
5.3.2.2(Rated insulation voltage)	-	2000	Only for internal testing
5.3.2.3(Rated impulse withstand voltage)	-	2000	Only for internal testing
5.3.3(Currents)	-	2000	Only for internal testing
5.3.3.2(Conventional free air thermal current)	-	2000	Only for internal testing
5.3.3.3(Conventional enclosed thermal current)	-	2000	Only for internal testing
5.3.3.4(Rated operational current (Ie) or rated operational power)	-	2000	Only for internal testing
5.3.3.5(Rated uninterrupted current)	-	2000	Only for internal testing
5.3.4(Rated frequency)	-	2000	Only for internal testing
5.3.5(Rated duty)	-	2000	Only for internal testing
5.3.5.2(Eight-hour duty)	-	1000	Only for internal testing
5.3.5.3(Uninterrupted duty)	-	1000	Only for internal testing
5.3.6.1(Ability to withstand motor switching overload currents)	-	2000	Only for internal testing
5.3.6.2(Rated making capacity)	-	20000	Only for internal testing
5.3.6.3(Rated breaking capacity)	-	10000	Only for internal testing
5.3.7(Short-circuit characteristics)	-	5000	Only for internal testing
5.3.7.1(Rated short-time withstand current)	-	2000	Only for internal testing
5.3.7.2(Rated short-circuit making capacity)	-	5000	Only for internal testing
5.3.7.4(Rated conditional short-circuit current)	-	10000	Only for internal testing
5.4(Utilization category)	-	1000	Only for internal testing
5.5(Control circuits)	-	2000	Only for internal testing
5.6(Auxiliary circuits)	-	2000	Only for internal testing
5.7(Relays and releases)	-	2000	Only for internal testing
5.8(Co-ordination with short-circuit protective devices (SCPD))	-	3000	Only for internal testing
6.2.2(Marking)	-	2000	Only for internal testing
6.3(Instructions for installation, operation and maintenance, decommissioning and dismantling)	-	2000	Only for internal testing
8.1.1(General)	-	2000	Only for internal testing
8.1.2.2(Glow wire testing)	-	16000	Only for internal testing
8.1.7.1(General)	-	2000	Only for internal testing
8.2.1(Operating conditions)	-	2000	Only for internal testing
8.2.1.1(General)	-	2000	Only for internal testing
8.2.1.2(Limits of operation of power operated equipment)	-	2000	Only for internal testing
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	5000	Only for internal testing
8.2.1.4(Limits of operation of shunt releases)	-	5000	Only for internal testing
8.2.2(Temperature-rise)	-	20000	Only for internal testing
8.2.3(Dielectric properties)	-	20000	Only for internal testing
8.2.3.2(Impulse withstand voltage)	-	10000	Only for internal testing
8.2.3.3(Power-frequency or DC withstand voltage of the main, auxiliary and control circuits)	-	2000	Only for internal testing
8.2.4(Ability to make and break under no-load, normal load and overload conditions)	-	2000	Only for internal testing
8.2.4.1(Making and breaking capacities)	-	4000	Only for internal testing
8.2.4.2(Operational performance)	-	20000	Only for internal testing
8.2.4.3(Mechanical durability)	-	30000	Only for internal testing
8.2.4.4(Electrical durability)	-	40000	Only for internal testing
8.2.5(Ability to make, break or withstand short-circuit currents)	-	10000	Only for internal testing
8.2.7(Additional performance requirements for equipment suitable for isolation)	-	10000	Only for internal testing
8.2.8(Critical load current performance: DC equipment)	-	10000	Only for internal testing
8.2.9(Overload requirements for equipment incorporating fuses)	-	20000	Only for internal testing
9.1.3.2(Mechanical operation test)	-	30000	Only for internal testing
9.1.3.3(Dielectric test)	-	10000	Only for internal testing
9.1.4(Sampling tests)	-	5000	Only for internal testing
9.1.5Special tests(Special tests)	-	10000	Only for internal testing
9.2(Compliance with constructional requirements)	-	2000	Only for internal testing
9.3.3.6(DC test current ripple)	-	2000	Only for internal testing
9.3.4.2(Temperature-rise)	-	20000	Only for internal testing
9.3.4.3(Test of dielectric properties)	-	20000	Only for internal testing
9.3.4.4(Making and breaking capacities)	-	40000	Only for internal testing
9.3.4.4.3(Characteristics of transient recovery voltage)	-	2000	Only for internal testing
9.3.4.5(Dielectric verification)	-	8000	Only for internal testing
9.3.4.6(Leakage current)	-	5000	Only for internal testing
9.3.5.2(Operational performance test)	-	15000	Only for internal testing
9.3.6.2(Short-time withstand current test)	-	10000	Only for internal testing
9.3.6.3(Short-circuit making capacity test)	-	30000	Only for internal testing
9.3.7.2(Circuit-breaker protected short-circuit withstand)	-	5000	Only for internal testing
9.3.7.3(Fuse protected short-circuit withstand)	-	5000	Only for internal testing
9.3.8.2(Overload test)	-	10000	Only for internal testing
9.3.9.2(Determination of critical load current)	-	2000	Only for internal testing
9.4(Electromagnetic compatibility tests)	-	2000	Only for internal testing
9.5.2(Mechanical durability)	-	15000	Only for internal testing
9.5.3(Electrical durability)	-	30000	Only for internal testing
D.7.1.1(Ambient air temperature)	-	20000	Only for internal testing
D.8.1.4(Clearances and creepage distances)	-	10000	Only for internal testing
D.8.1.12(Degrees of protection of enclosed equipment)	-	30000	Only for internal testing
D.9.3.10(Thermal cycling test)	-	1000	Only for internal testing
D.9.3.11(Climatic test)	-	10000	Only for internal testing
D.9.3.12(Temperature-rise verification with solar effects – Outdoor units only)	-	20000	Only for internal testing
E.9.2(Current cycling test)	-	10000	Only for internal testing
E.9.2.4(Temperature measurements)	-	20000	Only for internal testing
E.9.3.1(Flexion test)	-	10000	Only for internal testing
E.9.3.2(Pull-out test)	-	10000	Only for internal testing
8.1.7.2(Additional constructional requirements)	-	2000	Only for internal testing
8.1.9(Additional requirements for equipment provided with a neutral pol)	-	2000	Only for internal testing
9.3.4.7(Temperature-rise verification)	-	15000	Only for internal testing
9.3.4.8(Strength of actuator mechanism)	-	10000	Only for internal testing
9.3.5.3(Dielectric verification)	-	10000	Only for internal testing
9.3.5.5(Temperature-rise verification)	-	15000	Only for internal testing
9.3.6.4(Dielectric verification)	-	10000	Only for internal testing
9.3.6.6(Temperature-rise verification)	-	15000	Only for internal testing
9.3.7.4(Dielectric verification)	-	10000	Only for internal testing
9.3.7.6(Temperature-rise verification)	-	15000	Only for internal testing
9.3.8.3(Dielectric verification)	-	10000	Only for internal testing
9.3.8.5(Temperature-rise verification)	-	15000	Only for internal testing
9.3.9.3(Critical load current performance)	-	2000	Only for internal testing
9.3.5.4(Leakage current)	-	10000	Only for internal testing
9.3.6.5(Leakage current)	-	10000	Only for internal testing
9.3.7.5(Leakage current)	-	10000	Only for internal testing
9.3.8.4(Leakage current)	-	10000	Only for internal testing
9.4.2(Immunity)	-	2000	Only for internal testing
9.4.3(Emission)	-	2000	Only for internal testing
9.5.4(Damp heat, salt mist, vibration and shock)	-	10000	Only for internal testing
7(Normal service, mounting and transport conditions)	-	1000	Only for internal testing
9.1.3.2(Mechanical operation test)	-	10000	Only for internal testing

05 Jun, 2028

-
Included w.e.f 23.06.2025 Restricted only for Sequence I, II, V & VI. Excluding Cl. 8.3 (Electromagnetic compatibility (EMC)), Cl. 9.3.6 (short-circuit performance capability), Cl. 9.3.7 (conditional short-circuit current), Cl. 9.3.4 (Performance under short-circuit conditions), Cl. 9.4 (EMC tests), 9.3.9.2 (Determination of critical load current), 8.2.8 (Critical load current performance: DC equipment)

IS/IEC 60947 : Part 5 : Sec 1 (2016)

Low-Voltage Switchgear And Control Gear : Part 5-1 Control Circuit Devices And Switching Elements Electromechanical Control Circuit Devices

Limit switch, Foot switch, control relay, push button, auxiliary Device

2000000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1(Marking : General ")	-	2000	Only for internal testing.
5.2.2(Terminal identification and marking)	-	1000	Only for internal testing.
5.2.3(Functional markings)	-	2000	Only for internal testing.
5.2.4(Emergency stop)	-	2000	Only for internal testing.
5.2.5(Operating diagram)	-	2000	Only for internal testing.
5.2.5.1(Position indication)	-	2000	Only for internal testing.
5.2.5.2(Terminal markings for operating diagrams)	-	2000	Only for internal testing.
5.2.6(Time delay markings)	-	2000	Only for internal testing.
5.3(Instructions for installation, operation and maintenance)	-	2000	Only for internal testing.
7.1.2.2(Glow-wire testing)	-	20000	Only for internal testing.
7.1.3(Current-carrying parts and their connections)	-	2000	Only for internal testing.5000
7.1.4(Clearances and creepage distances)	-	5000	Only for internal testing.
7.2.4.1(Making and breaking capacities)	-	30000	Only for internal testing.
7.2.4.3(Durability)	-	2000	Only for internal testing.
7.3.2.4(Electrostatic discharges)	-	2000	Only for internal testing.
7.3.2.5(Radiated radio-frequency electromagnetic fields)	-	3000	Only for internal testing.
7.3.2.6(Electrical fast transients/bursts)	-	10000	Only for internal testing.
7.3.2.7(Surges)	-	10000	Only for internal testing.
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	2000	Only for internal testing.2000
7.3.2.9(Power-frequency magnetic fields)	-	2000	Only for internal testing.
7.3.2.10(Voltage dips and interruptions)	-	2000	Only for internal testing.
7.3.2.11(Harmonics in the supply)	-	2000	Only for internal testing.
7.3.3(Emission)	-	5000	Only for internal testing.
7.2.3(Dielectric properties)	-	20000	Only for internal testing.
8.1.5(Special tests)	-	2000	Only for internal testing.
8.2.1.1(Test of resistance to abnormal heat and fire)	-	15000	Only for internal testing.
8.2.1.1.1(Glow-wire test)	-	20000	Only for internal testing.
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	2000	Only for internal testing.
8.2.3(Enclosures for equipment)	-	1000	Only for internal testing.
8.2.4(Mechanical and electrical properties of terminals)	-	10000	Only for internal testing.
8.2.4.2(Tests of mechanical strength of terminals)	-	10000	Only for internal testing.
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	20000	Only for internal testing.
8.2.4.4(Pull-out test)	-	10000	Only for internal testing.
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	10000	Only for internal testing.
8.2.5(Verification of actuating force (or moment))	-	10000	Only for internal testing.
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	5000	Only for internal testing.
8.2.7(Conduit pull-out test, torque test, and bending test with metallic conduits)	-	5000	Only for internal testing.
8.3.3.3(Temperature rise)	-	20000	Only for internal testing.
8.3.3.4(Dielectric properties)	-	30000	Only for internal testing.
8.3.3.2(Operating limits of contactor relays)	-	20000	Only for internal testing.
8.3.3.5(Making and breaking capacities)	-	50000	Only for internal testing.
8.3.3.5.2(Test circuits and connections)	-	2000	Only for internal testing.
8.3.4.3(Test circuit and test quantities)	-	2000	Only for internal testing.
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	120000	Only for internal testing.
8.3.4.1(General conditions for short-circuit tests)	-	10000	Only for internal testing.
8.3.4.4 b)(Condition of the switching element after the test)	-	5000	Only for internal testing.
8.3.4.4 a)(Condition of the switching element after the test)	-	5000	Only for internal testing.
8.4.2.4(Surges)	-	5000	Only for internal testing.
8.3.1(Degree of protection of enclosed control circuit devices)	-	40000	Only for internal testing.
C.3(Electrical durability)	-	150000	Only for internal testing.
C.2(Mechanical durability)	-	50000	Only for internal testing.
C.1.2(Observation)	-	2000	Only for internal testing.
F 8.1.2.6("Dielectric test after stresses")	-	20000	Only for internal testing.
F 8.1.2.4(Impact test)	-	3000	Only for internal testing.
F.8.1.2.3("Rapid change of temperature test")	-	5000	Only for internal testing.
F.8.1.2.5(Damp heat, cyclic)	-	10000	Only for internal testing.
F.8.1.2.4(Impact test)	-	2000	Only for internal testing.
F.8.1.2.1(Dielectric tests in new conditions)	-	15000	Only for internal testing.
G.8.2.5(Bend test)	-	3000	Only for internal testing.
G.8.2.4(Push test)	-	2000	Only for internal testing.
G.8.2.3(Torque test)	-	5000	Only for internal testing.
G.8.2.2(Pull-out test)	-	5000	Only for internal testing.
H.8.7("Verification of electromagnetic compatibility")	-	2000	Only for internal testing.
H.8.6("Performance under short circuit current conditions")	-	55000	Only for internal testing.
H.8.5("Making and breaking capacities")	-	40000	Only for internal testing.
H.8.4(OFF-state current)	-	5000	Only for internal testing.
H.8.2(Voltage drop test)	-	5000	Only for internal testing.
J.8.5("Degree of protection for indicating towers")	-	5000	Only for internal testing.
J.8.4.3(Indirect support mounting)	-	2000	Only for internal testing.
J.8.4.2.3(Vibration)	-	3000	Only for internal testing.
J.8.4.2.2(Shock)	-	5000	Only for internal testing.
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	15000	Only for internal testing.
J.8.3.3.3(Temp-rise tests)	-	20000	Only for internal testing.
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	10000	Only for internal testing.
J.8.3.3.4(Dielectric test)	-	10000	Only for internal testing.
J.7.1.12(Indicator lights with built-in transformers)	-	2000	Only for internal testing.
J.7("Constructional requirements")	-	8000	Only for internal testing.
K 8.3.4("Performance under conditional shortcircuit current")	-	70000	Only for internal testing.
K 8.3.7(Verification of robustness of the actuating system)	-	2000	Only for internal testing.
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	10000	Only for internal testing.
K.8.3.6(Verification of direct opening action)	-	8000	Only for internal testing.
L.8.4(Special test for mechanically linked contact elements)	-	50000	Only for internal testing.
N.3(Method based on durability test results)	-	1000	Only for internal testing.
L.8.4(Special test for mechanically linked contact elements)	-	40000	Only for internal testing.
K.8.3.6(Verification of direct opening action)	-	2000	Only for internal testing.
5.2.1(" Marking : General ")	-	2000	Only for internal testing.
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	5000	Only for internal testing.
K 8.3.7(Verification of robustness of the actuating system)	-	2000	Only for internal testing.
K 8.3.4("Performance under conditional shortcircuit current")	-	70000	Only for internal testing.
5.2.2(Terminal identification and marking)	-	3000	Only for internal testing.
J.7("Constructional requirements")	-	5000	Only for internal testing.
5.2.3(Functional markings)	-	2000	Only for internal testing.
J.7.1.12(Indicator lights with built-in transformers)	-	2000	Only for internal testing.
J.8.3.3.4(Dielectric test)	-	10000	Only for internal testing.
5.2.4(Emergency stop)	-	3000	Only for internal testing.
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	10000	Only for internal testing.
J.8.3.3.3(Temp-rise tests)	-	20000	Only for internal testing.
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	20000	Only for internal testing.
5.2.5(Operating diagram)	-	3000	Only for internal testing.
J.8.4.2.2(Shock)	-	2000	Only for internal testing.
5.2.5.1(Position indication)	-	2000	Only for internal testing.
J.8.4.2.3(Vibration)	-	3000	Only for internal testing.
J.8.4.3(Indirect support mounting)	-	3000	Only for internal testing.
5.2.5.2(Terminal markings for operating diagrams)	-	2000	Only for internal testing.
J.8.5("Degree of protection for indicating towers")	-	15000	Only for internal testing.
5.2.6(Time delay markings)	-	2000	Only for internal testing.
H.8.2(Voltage drop test)	-	1000	Only for internal testing.
5.3(Instructions for installation, operation and maintenance)	-	1000	Only for internal testing.
H.8.4(OFF-state current)	-	1000	Only for internal testing.
H.8.5("Making and breaking capacities")	-	20000	Only for internal testing.
7.1.2.2(Glow-wire testing)	-	15000	Only for internal testing.
H.8.6("Performance under short circuit current conditions")	-	60000	Only for internal testing.
7.1.3(Current-carrying parts and their connections)	-	3000	Only for internal testing.
H.8.7("Verification of electromagnetic compatibility")	-	2000	Only for internal testing.
G.8.2.2(Pull-out test)	-	10000	Only for internal testing.
7.1.4 of IEC 60947-1:2007 (Sequence 6)(Measurement of Clearances and creepage distances)	-	6000	Only for internal testing.
G.8.2.3(Torque test)	-	10000	Only for internal testing.
7.2.4.1(Making and breaking capacities)	-	60000	Only for internal testing.
7.2.4.1(Making and breaking capacities)	-	70000	Only for internal testing.
G.8.2.4(Push test)	-	1000	Only for internal testing.
G.8.2.5(Bend test)	-	2000	Only for internal testing.
F.8.1.2.1(Dielectric tests in new conditions)	-	10000	Only for internal testing.
7.2.4.3(Durability)	-	2000	Only for internal testing.
F.8.1.2.4(Impact test)	-	5000	Only for internal testing.
7.3.2.4(Electrostatic discharges)	-	2000	Only for internal testing.
F.8.1.2.3("Rapid change of temperature test")	-	10000	Only for internal testing.
7.3.2.6(Electrical fast transients/bursts)	-	2000	Only for internal testing.
F 8.1.2.4(Impact test)	-	2000	Only for internal testing.
F 8.1.2.6("Dielectric test after stresses")	-	10000	Only for internal testing.
C.1.2(Observation)	-	2000	Only for internal testing.
7.3.2.7(Surges)	-	5000	Only for internal testing.
C.2(Mechanical durability)	-	50000	Only for internal testing.
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	2000	Only for internal testing.
C.3(Electrical durability)	-	70000	Only for internal testing.
7.3.2.9(Power-frequency magnetic fields)	-	2000	Only for internal testing.
Annex C of IEC 60947-1:2007 (Sequence 5)(Degree of protection of enclosed control circuit devices)	-	20000	Only for internal testing.
8.4.2.4(Surges)	-	5000	Only for internal testing.
7.3.2.10(Voltage dips and interruptions)	-	3000	Only for internal testing.
8.3.4.4 a)(Condition of the switching element after the test)	-	2000	Only for internal testing.
8.3.4.4 b)(Condition of the switching element after the test)	-	2000	Only for internal testing.
7.3.2.11(Harmonics in the supply)	-	5000	Only for internal testing.
8.3.4.1(General conditions for short-circuit tests)	-	20000	Only for internal testing.
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	70000	Only for internal testing.
8.3.4.3(Test circuit and test quantities)	-	2000	Only for internal testing.
7.3.3(Emission)	-	2000	Only for internal testing.
8.3.3.5.2(Test circuits and connections)	-	2000	Only for internal testing.
8.3.3.5(Making and breaking capacities)	-	40000	Only for internal testing.
8.3.3.2(Operating limits of contactor relays)	-	15000	Only for internal testing.
7.2.3(Dielectric properties)	-	20000	Only for internal testing.
8.3.3.4(Dielectric properties)	-	20000	Only for internal testing.
8.3.3.3(Temperature rise)	-	20000	Only for internal testing.
8.1.5(Special tests)	-	6000	Only for internal testing.
8.2.7(Conduit pull-out test, torque test and bending test with metallic conduits)	-	5000	Only for internal testing.
8.2.6 (Sequence 6)(Verification of limitation of rotation (of a rotary switch))	-	2000	Only for internal testing.
8.2.1.1(Test of resistance to abnormal heat and fire)	-	10000	Only for internal testing.
8.2.5 (Sequence 5)(Verification of actuating force (or moment))	-	5000	Only for internal testing.
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	5000	Only for internal testing.
8.2.1.1.1(Glow-wire test)	-	15000	Only for internal testing.
8.2.4.4(Pull-out test)	-	5000	Only for internal testing.
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	10000	Only for internal testing.
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	3000	Only for internal testing.
8.2.4.2(Tests of mechanical strength of terminals)	-	10000	Only for internal testing.
8.2.4(Mechanical and electrical properties of terminals)	-	10000	Only for internal testing.
8.2.3(Enclosures for equipment)	-	10000	Only for internal testing.
8.3.3.5.6 b(Dielectric verification)	-	2000	Only for internal testing.
8.3.4(Performance under Conditional Short-Circuit Current)	-	70000	Only for internal testing.
8.3.3.5.3(Making and breaking capacities of switching elements under abnormal conditions)	-	30000	Only for internal testing.
8.3.3.5.4(Making and breaking capacities of switching elements under abnormal conditions)	-	30000	Only for internal testing.
F.8.1.2.5(Damp heat, cyclic)	-	8000	Only for internal testing.
5.2.1(Marking : General ")	-	-	-
5.2.2(Terminal identification and marking)	-	-	-
5.2.3(Functional markings)	-	-	-
5.2.4(Emergency stop)	-	-	-
5.2.5(Operating diagram)	-	-	-
5.2.5.1(Position indication)	-	-	-
5.2.5.2(Terminal markings for operating diagrams)	-	-	-
5.2.6(Time delay markings)	-	-	-
5.3(Instructions for installation, operation and maintenance)	-	-	-
7.1.2.2(Glow-wire testing)	-	-	-
7.1.3(Current-carrying parts and their connections)	-	-	-
7.1.4(Clearances and creepage distances)	-	-	-
7.2.4.1(Making and breaking capacities)	-	-	-
7.2.4.3(Durability)	-	-	-
7.3.2.4(Electrostatic discharges)	-	-	-
7.3.2.5(Radiated radio-frequency electromagnetic fields)	-	-	-
7.3.2.6(Electrical fast transients/bursts)	-	-	-
7.3.2.7(Surges)	-	-	-
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	-	-
7.3.2.9(Power-frequency magnetic fields)	-	-	-
7.3.2.10(Voltage dips and interruptions)	-	-	-
7.3.2.11(Harmonics in the supply)	-	-	-
7.3.3(Emission)	-	-	-
7.2.3(Dielectric properties)	-	-	-
8.1.5(Special tests)	-	-	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	-	-
8.2.1.1.1(Glow-wire test)	-	-	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	-	-
8.2.3(Enclosures for equipment)	-	-	-
8.2.4(Mechanical and electrical properties of terminals)	-	-	-
8.2.4.2(Tests of mechanical strength of terminals)	-	-	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	-	-
8.2.4.4(Pull-out test)	-	-	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	-	-
8.2.5(Verification of actuating force (or moment))	-	-	-
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	-	-
8.2.7(Conduit pull-out test, torque test, and bending test with metallic conduits)	-	-	-
8.3.3.3(Temperature rise)	-	-	-
8.3.3.4(Dielectric properties)	-	-	-
8.3.3.2(Operating limits of contactor relays)	-	-	-
8.3.3.5(Making and breaking capacities)	-	-	-
8.3.3.5.2(Test circuits and connections)	-	-	-
8.3.4.3(Test circuit and test quantities)	-	-	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	-	-
8.3.4.1(General conditions for short-circuit tests)	-	-	-
8.3.4.4 b)(Condition of the switching element after the test)	-	-	-
8.3.4.4 a)(Condition of the switching element after the test)	-	-	-
8.4.2.4(Surges)	-	-	-
8.3.1(Degree of protection of enclosed control circuit devices)	-	-	-
C.3(Electrical durability)	-	-	-
C.2(Mechanical durability)	-	-	-
C.1.2(Observation)	-	-	-
F 8.1.2.6("Dielectric test after stresses")	-	-	-
F 8.1.2.4(Impact test)	-	-	-
F.8.1.2.3("Rapid change of temperature test")	-	-	-
F.8.1.2.5(Damp heat, cyclic)	-	-	-
F.8.1.2.4(Impact test)	-	-	-
F.8.1.2.1(Dielectric tests in new conditions)	-	-	-
G.8.2.5(Bend test)	-	-	-
G.8.2.4(Push test)	-	-	-
G.8.2.3(Torque test)	-	-	-
G.8.2.2(Pull-out test)	-	-	-
H.8.7("Verification of electromagnetic compatibility")	-	-	-
H.8.6("Performance under short circuit current conditions")	-	-	-
H.8.5("Making and breaking capacities")	-	-	-
H.8.4(OFF-state current)	-	-	-
H.8.2(Voltage drop test)	-	-	-
J.8.5("Degree of protection for indicating towers")	-	-	-
J.8.4.3(Indirect support mounting)	-	-	-
J.8.4.2.3(Vibration)	-	-	-
J.8.4.2.2(Shock)	-	-	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	-	-
J.8.3.3.3(Temp-rise tests)	-	-	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	-	-
J.8.3.3.4(Dielectric test)	-	-	-
J.7.1.12(Indicator lights with built-in transformers)	-	-	-
J.7("Constructional requirements")	-	-	-
K 8.3.4("Performance under conditional shortcircuit current")	-	-	-
K 8.3.7(Verification of robustness of the actuating system)	-	-	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	-	-
K.8.3.6(Verification of direct opening action)	-	-	-
L.8.4(Special test for mechanically linked contact elements)	-	-	-
N.3(Method based on durability test results)	-	-	-
L.8.4(Special test for mechanically linked contact elements)	-	-	-
K.8.3.6(Verification of direct opening action)	-	-	-
5.2.1(" Marking : General ")	-	-	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	-	-
K 8.3.7(Verification of robustness of the actuating system)	-	-	-
K 8.3.4("Performance under conditional shortcircuit current")	-	-	-
5.2.2(Terminal identification and marking)	-	-	-
J.7("Constructional requirements")	-	-	-
5.2.3(Functional markings)	-	-	-
J.7.1.12(Indicator lights with built-in transformers)	-	-	-
J.8.3.3.4(Dielectric test)	-	-	-
5.2.4(Emergency stop)	-	-	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	-	-
J.8.3.3.3(Temp-rise tests)	-	-	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	-	-
5.2.5(Operating diagram)	-	-	-
J.8.4.2.2(Shock)	-	-	-
5.2.5.1(Position indication)	-	-	-
J.8.4.2.3(Vibration)	-	-	-
J.8.4.3(Indirect support mounting)	-	-	-
5.2.5.2(Terminal markings for operating diagrams)	-	-	-
J.8.5("Degree of protection for indicating towers")	-	-	-
5.2.6(Time delay markings)	-	-	-
H.8.2(Voltage drop test)	-	-	-
5.3(Instructions for installation, operation and maintenance)	-	-	-
H.8.4(OFF-state current)	-	-	-
H.8.5("Making and breaking capacities")	-	-	-
7.1.2.2(Glow-wire testing)	-	-	-
H.8.6("Performance under short circuit current conditions")	-	-	-
7.1.3(Current-carrying parts and their connections)	-	-	-
H.8.7("Verification of electromagnetic compatibility")	-	-	-
G.8.2.2(Pull-out test)	-	-	-
7.1.4 of IEC 60947-1:2007 (Sequence 6)(Measurement of Clearances and creepage distances)	-	-	-
G.8.2.3(Torque test)	-	-	-
7.2.4.1(Making and breaking capacities)	-	-	-
7.2.4.1(Making and breaking capacities)	-	-	-
G.8.2.4(Push test)	-	-	-
G.8.2.5(Bend test)	-	-	-
F.8.1.2.1(Dielectric tests in new conditions)	-	-	-
7.2.4.3(Durability)	-	-	-
F.8.1.2.4(Impact test)	-	-	-
7.3.2.4(Electrostatic discharges)	-	-	-
F.8.1.2.3("Rapid change of temperature test")	-	-	-
7.3.2.6(Electrical fast transients/bursts)	-	-	-
F 8.1.2.4(Impact test)	-	-	-
F 8.1.2.6("Dielectric test after stresses")	-	-	-
C.1.2(Observation)	-	-	-
7.3.2.7(Surges)	-	-	-
C.2(Mechanical durability)	-	-	-
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	-	-
C.3(Electrical durability)	-	-	-
7.3.2.9(Power-frequency magnetic fields)	-	-	-
Annex C of IEC 60947-1:2007 (Sequence 5)(Degree of protection of enclosed control circuit devices)	-	-	-
8.4.2.4(Surges)	-	-	-
7.3.2.10(Voltage dips and interruptions)	-	-	-
8.3.4.4 a)(Condition of the switching element after the test)	-	-	-
8.3.4.4 b)(Condition of the switching element after the test)	-	-	-
7.3.2.11(Harmonics in the supply)	-	-	-
8.3.4.1(General conditions for short-circuit tests)	-	-	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	-	-
8.3.4.3(Test circuit and test quantities)	-	-	-
7.3.3(Emission)	-	-	-
8.3.3.5.2(Test circuits and connections)	-	-	-
8.3.3.5(Making and breaking capacities)	-	-	-
8.3.3.2(Operating limits of contactor relays)	-	-	-
7.2.3(Dielectric properties)	-	-	-
8.3.3.4(Dielectric properties)	-	-	-
8.3.3.3(Temperature rise)	-	-	-
8.1.5(Special tests)	-	-	-
8.2.7(Conduit pull-out test, torque test and bending test with metallic conduits)	-	-	-
8.2.6 (Sequence 6)(Verification of limitation of rotation (of a rotary switch))	-	-	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	-	-
8.2.5 (Sequence 5)(Verification of actuating force (or moment))	-	-	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	-	-
8.2.1.1.1(Glow-wire test)	-	-	-
8.2.4.4(Pull-out test)	-	-	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	-	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	-	-
8.2.4.2(Tests of mechanical strength of terminals)	-	-	-
8.2.4(Mechanical and electrical properties of terminals)	-	-	-
8.2.3(Enclosures for equipment)	-	-	-
8.3.3.5.6 b(Dielectric verification)	-	-	-
8.3.4(Performance under Conditional Short-Circuit Current)	-	-	-
8.3.3.5.3(Making and breaking capacities of switching elements under abnormal conditions)	-	-	-
8.3.3.5.4(Making and breaking capacities of switching elements under abnormal conditions)	-	-	-
F.8.1.2.5(Damp heat, cyclic)	-	-	-

05 Jun, 2028

-
Included w.e.f 23.06.2025 Restricted only for Sequence I, II, III, IV, V & VI. Excluding Cl. 7.1.3 (Current-carrying parts and their connections), Cl. 7.3 (Electromagnetic compatibility (EMC)), 8.2.1.1.2 (Flammability, hot wire ignition and arc ignition tests (on materials)) Cl. 8.3.4 (Performance under conditional short-circuit current), Cl. 9.3.4 (Performance under short-circuit conditions), Cl. 8.4 (EMC tests), G.8.2.5 (Bend test), J.8.4 Shock and vibration

IS/IEC 60947 : Part 4 : Sec 1 (2018)

Low-Voltage switchgear and controlgear : Part 4-1 Contactors and motor starters electromechanical contactors and motor-Starters

Contactor & Starter

1100000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.2(Materials)	-	5000	Only for internal testing
8.1.2.1(General materials requirements)	-	10000	Only for internal testing
8.1.2.2(Glow wire testing)	-	30000	Only for internal testing
8.1.2.3(Test based on flammability category)	-	0	Only for internal testing
8.1.3(Current-carrying parts and their connections)	-	5000	Only for internal testing
8.1.4(Clearances and creepage distances)	-	10000	Only for internal testing
8.1.5.1(Insulation)	-	5000	Only for internal testing
8.1.5.2(Direction of movement)	-	0	Only for internal testing
8.1.5.3(Mounting)	-	5000	Only for internal testing
8.1.5.4(Protection)	-	0	Only for internal testing
8.1.8(Terminals)	-	0	Only for internal testing
8.1.8.1(General)	-	5000	Only for internal testing
8.1.8.2(Terminal identification and marking)	-	10000	Only for internal testing
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	2000	Only for internal testing
8.1.10(Provisions for protective earthing)	-	2000	Only for internal testing
8.1.11(Enclosures for equipment)	-	30000	Only for internal testing
8.1.11.1(Design)	-	5000	Only for internal testing
8.1.11.2(Insulation)	-	5000	Only for internal testing
8.1.12(Degrees of protection of enclosed equipment)	-	50000	Only for internal testing
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	10000	Only for internal testing
8.1.14(Limited energy source)	-	0	Only for internal testing
8.1.14.1(General)	-	5000	Only for internal testing
8.1.14.2(Limited energy source with galvanic separation)	-	0	Only for internal testing
8.1.14.3(Limited energy source with current limiting impedance)	-	0	Only for internal testing
8.1.15(Stored charge energy circuit)	-	2000	Only for internal testing
8.1.16(Fault and abnormal conditions)	-	2000	Only for internal testing
8.1.17(Short-circuit and overload protection of ports)	-	2000	Only for internal testing
8.2(Performance requirements)	-	10000	Only for internal testing
8.2.1(Operating conditions)	-	10000	Only for internal testing
8.2.1.1.1(General conditions)	-	5000	Only for internal testing
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	25000	Only for internal testing
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	10000	Only for internal testing
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	10000	Only for internal testing
8.2.1.5(Limits of operation of current sensing relays and releases)	-	2000	Only for internal testing
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	20000	Only for internal testing
8.2.1.5.1.1(General tripping requirements of overload relays)	-	30000	Only for internal testing
8.2.1.5.1.2(Thermal memory test verification)	-	2000	Only for internal testing
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	20000	Only for internal testing
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	2000	Only for internal testing
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	2000	Only for internal testing
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	10000	Only for internal testing
8.2.2(Temperature-rise)	-	20000	Only for internal testing
8.2.2.3(Accessible parts)	-	20000	Only for internal testing
8.2.2.4(Ambient air temperature)	-	20000	Only for internal testing
8.2.2.5(Main circuit)	-	20000	Only for internal testing
8.2.2.6(Control circuits)	-	20000	Only for internal testing
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	10000	Only for internal testing
8.2.3(Dielectric properties)	-	40000	Only for internal testing
8.2.3.2(Voltage limiting components between circuits)	-	10000	Only for internal testing
8.2.4.3.1(Mechanical durability)	-	50000	Only for internal testing
8.2.4.3.2(Electrical durability)	-	120000	Only for internal testing
8.2.4.4(Overload current withstand capability of contactors)	-	15000	Only for internal testing
8.2.4.5(Coil power consumption)	-	20000	Only for internal testing
8.2.4.6(Pole impedance)	-	15000	Only for internal testing
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	0	This test is under Exclusion
8.2.5.1(Performance under short-circuit conditions)	-	0	This test is under Exclusion
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	0	This test is under Exclusion
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	0	This test is under Exclusion
8.3(Electromagnetic compatibility (EMC))	-	0	This test under Exclusion
8.3.3(Emission)	-	0	This test under Exclusion
9.1.5.2(Environment tests)	-	25000	Only for internal testing
9.2.2(Electrical performance of screwless-type clamping units)	-	5000	Only for internal testing
9.2.3(Ageing test for screwless-type clamping unit)	-	2000	Only for internal testing
9.2.4(Limited energy source test)	-	2000	Only for internal testing
9.2.5(Breakdown of components)	-	2000	Only for internal testing
9.2.5.2(Breakdown of components test)	-	2000	Only for internal testing
9.3.3.2(Operating limits)	-	20000	Only for internal testing
9.3.3.2.1.2(Coil power consumption)	-	10000	Only for internal testing
9.3.3.2.1.3(Pole impedance)	-	10000	Only for internal testing
9.3.3.2.2(Relays and releases)	-	10000	Only for internal testing
9.3.3.3.1(Ambient air temperature)	-	20000	Only for internal testing
9.3.3.3.2(Measurement of the temperature of parts)	-	20000	Only for internal testing
9.3.3.3.3(Temperature-rise of a part)	-	20000	Only for internal testing
9.3.3.3.4(Temperature-rise of the main circuit)	-	20000	Only for internal testing
9.3.3.3.5(Temperature-rise of control circuits)	-	20000	Only for internal testing
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	20000	Only for internal testing
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	20000	Only for internal testing
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	20000	Only for internal testing
9.3.3.6(Operational performance capability)	-	50000	Only for internal testing
9.3.4.2.2(prospective current)	-	10000	Only for internal testing
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	10000	Only for internal testing
9.3.5(Overload current withstand capability of contactors)	-	15000	Only for internal testing
9.3.6.2(Operation and operating limits)	-	20000	Only for internal testing
9.3.6.3(Dielectric tests)	-	20000	Only for internal testing
9.3.6.4(Mechanical operation tests of a MPSD)	-	2000	This test is under Exclusion
9.4.2(Immunity)	-	5000	This test is under Exclusion
9.4.2.2(Electrostatic discharge)	-	5000	This test is under Exclusion
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	5000	This test is under Exclusion
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	5000	This test is under Exclusion
9.4.2.5(Electrical fast transient/bursts)	-	5000	This test is under Exclusion
9.4.2.6(Surges)	-	10000	only for internal testing
9.4.2.7(Power frequency magnetic field)	-	1000	only internal testing
9.4.2.8(Voltage dips and short-time interruptions)	-	2000	only internal testing00
9.4.2.9(Harmonics in the supply)	-	2000	only internal testing
9.4.3(Emission)	-	2000	only internal testing
F.7.2(Tests on products in a new condition)	-	2000	only internal testing
F.7.3(Test after conventional operational performance)	-	2000	only internal testing
H.3(Limits of operation of control functions)	-	2000	only internal testing
H.4(Test of the control functions)	-	2000	only internal testing
M.8.3(Electromagnetic compatibility (EMC))	-	5000	This test is under Exclusio
M.9.4(Thermal cycling test)	-	5000	only for internal testing
M.9.5(Climatic test)	-	5000	only internal testing
M.9.7(Critical load current test)	-	2000	only for internal testing
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	40000	only for internal testing
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	40000	only internal testing
M.9.11(Clearance and creepage distances)	-	10000	only for internal testing
N.3.2(Touch current measurement)	-	2000	only for internal testing
P.2.3(Verification of operational performance capability)	-	5000	only for internal testing
P.2.4.2(Test voltage)	-	2000	only for internal testing
P.2.4.3(Application of the test voltage)	-	2000	only for internal testing
P.4(Test of MPSD for IT system)	-	2000	only for internal testing
Q.5.3(Selectivity determined by test)	-	2000	only for internal testing
8.3.2(Immunity)	-	2000	this test is under exclusion
8.2.1.5.4.1(Limits of operation of under-current relays)	-	20000	only for internal testing
8.1.2(Materials)	-	2000	only for internal testing
8.1.2.1(General materials requirements)	-	5000	only for internal testing
8.1.2.2(Glow wire testing)	-	20000	only for internal testing
8.1.2.3(Test based on flammability category)	-	5000	only for internal testing
8.1.3(Current-carrying parts and their connections)	-	10000	only for internal testing
8.1.4(Clearances and creepage distances)	-	10000	only for internal testing
8.1.5.1(Insulation)	-	5000	only for internal testing
8.1.5.2(Direction of movement)	-	2000	only for internal testing
8.1.5.3(Mounting)	-	2000	only for internal testing
8.1.5.4(Protection)	-	2000	only for internal testing
8.1.8(Terminals)	-	2000	only for internal testing
8.1.8.1(General)	-	2000	only for internal testing
8.1.8.2(Terminal identification and marking)	-	5000	only for internal testing
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	2000	only for internal testing
8.1.10(Provisions for protective earthing)	-	2000	only for internal testing
8.1.11(Enclosures for equipment)	-	20000	only for internal testing
8.1.11.1(Design)	-	2000	only for internal testing
8.1.11.2(Insulation)	-	5000	only for internal testing
8.1.12(Degrees of protection of enclosed equipment)	-	25000	only for internal testing
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	5000	only for internal testing
8.1.14(Limited energy source)	-	2000	only for internal testing
8.1.14.1(General)	-	2000	only for internal testing
8.1.14.2(Limited energy source with galvanic separation)	-	2000	only for internal testing
8.1.14.3(Limited energy source with current limiting impedance)	-	2000	only for internal testing
8.1.15(Stored charge energy circuit)	-	2000	only for internal testing
8.1.16(Fault and abnormal conditions)	-	2000	only for internal testing
8.1.17(Short-circuit and overload protection of ports)	-	10000	only for internal testing
8.2(Performance requirements)	-	10000	only for internal testing
8.2.1(Operating conditions)	-	15000	only for internal testing
8.2.1.1.1(General conditions)	-	5000	only for internal testing
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	100000	only for internal testing
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	10000	only for internal testing
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	10000	only for internal testing
8.2.1.5(Limits of operation of current sensing relays and releases)	-	2000	only for internal testing
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	10000	only for internal testing
8.2.1.5.1.1(General tripping requirements of overload relays)	-	20000	only for internal testing
8.2.1.5.1.2(Thermal memory test verification)	-	2000	only for internal testing
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	20000	only for internal testing
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	5000	only for internal testing
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	2000	only for internal testing
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	2000	only for internal testing
8.2.2(Temperature-rise)	-	20000	only for internal testing
8.2.2.3(Accessible parts)	-	20000	only for internal testing
8.2.2.4(Ambient air temperature)	-	20000	only for internal testing
8.2.2.5(Main circuit)	-	20000	only for internal testing
8.2.2.6(Control circuits)	-	20000	only for internal testing
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	10000	only for internal testing
8.2.3(Dielectric properties)	-	40000	only for internal testing
8.2.3.2(Voltage limiting components between circuits)	-	2000	only for internal testing
8.2.4.3.1(Mechanical durability)	-	50000	only for internal testing
8.2.4.3.2(Electrical durability)	-	120000	only for internal testing
8.2.4.4(Overload current withstand capability of contactors)	-	10000	only for internal testing
8.2.4.5(Coil power consumption)	-	10000	only for internal testing
8.2.4.6(Pole impedance)	-	10000	only for internal testing
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	2000	only for internal testing
8.2.5.1(Performance under short-circuit conditions)	-	5000	only for internal testing
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	2000	only for internal testing
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	5000	only for internal testing
8.3(Electromagnetic compatibility (EMC))	-	5000	only for internal testing
8.3.3(Emission)	-	2000	only for internal testing
9.1.5.2(Environment tests)	-	2000	only for internal testing
9.2.2(Electrical performance of screwless-type clamping units)	-	5000	only for internal testing
9.2.3(Ageing test for screwless-type clamping unit)	-	2000	only for internal testing
9.2.4(Limited energy source test)	-	2000	only for internal testing
9.2.5(Breakdown of components)	-	2000	only for internal testing
9.2.5.2(Breakdown of components test)	-	2000	only for internal testing
9.3.3.2(Operating limits)	-	20000	only for internal testing
9.3.3.2.1.2(Coil power consumption)	-	10000	only for internal testing
9.3.3.2.1.3(Pole impedance)	-	10000	only for internal testing
9.3.3.2.2(Relays and releases)	-	10000	only for internal testing
9.3.3.3.1(Ambient air temperature)	-	20000	only for internal testing
9.3.3.3.2(Measurement of the temperature of parts)	-	20000	only for internal testing
9.3.3.3.3(Temperature-rise of a part)	-	20000	only for internal testing
9.3.3.3.4(Temperature-rise of the main circuit)	-	20000	only for internal testing
9.3.3.3.5(Temperature-rise of control circuits)	-	20000	only for internal testing
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	20000	only for internal testing
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	20000	only for internal testing
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	20000	only for internal testing
9.3.3.6(Operational performance capability)	-	20000	only for internal testing
9.3.4.2.2(prospective current)	-	2000	only for internal testing
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	5000	only for internal testing
9.3.5(Overload current withstand capability of contactors)	-	15000	only for internal testing
9.3.6.2(Operation and operating limits)	-	20000	only for internal testing
9.3.6.3(Dielectric tests)	-	15000	only for internal testing
9.3.6.4(Mechanical operation tests of a MPSD)	-	2000	only for internal testing
9.4.2(Immunity)	-	2000	only for internal testing
9.4.2.2(Electrostatic discharge)	-	2000	only for internal testing
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	2000	only for internal testing
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	2000	only for internal testing
9.4.2.5(Electrical fast transient/bursts)	-	2000	only for internal testing
9.4.2.6(Surges)	-	2000	only for internal testing
9.4.2.7(Power frequency magnetic field)	-	2000	only for internal testing
9.4.2.8(Voltage dips and short-time interruptions)	-	2000	only for internal testing
9.4.2.9(Harmonics in the supply)	-	5000	only for internal testing
9.4.3(Emission)	-	2000	only for internal testing
F.7.2(Tests on products in a new condition)	-	2000	only for internal testing
F.7.3(Test after conventional operational performance)	-	2000	only for internal testing
H.3(Limits of operation of control functions)	-	2000	only for internal testing
H.4(Test of the control functions)	-	2000	only for internal testing
M.8.3(Electromagnetic compatibility (EMC))	-	5000	only for internal testing
M.9.4(Thermal cycling test)	-	2000	only for internal testing
M.9.5(Climatic test)	-	5000	only for internal testing
M.9.7(Critical load current test)	-	2000	only for internal testing
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	25000	only for internal testing
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	30000	only for internal testing
M.9.11(Clearance and creepage distances)	-	5000	only for internal testing
N.3.2(Touch current measurement)	-	10000	only for internal testing
P.2.3(Verification of operational performance capability)	-	10000	only for internal testing
P.2.4.2(Test voltage)	-	10000	only for internal testing
P.2.4.3(Application of the test voltage)	-	10000	only for internal testing
P.4(Test of MPSD for IT system)	-	1000	only for internal testing
Q.5.3(Selectivity determined by test)	-	1000	only for internal testing
8.3.2(Immunity)	-	10000	only for internal testing
8.2.1.5.4.1(Limits of operation of under-current relays)	-	10000	only for internal testing
8.1.2(Materials)	-	2000	only for internal testing
8.1.2.1(General materials requirements)	-	2000	only for internal testing
8.1.2.2(Glow wire testing)	-	15000	only for internal testing
8.1.2.3(Test based on flammability category)	-	2000	only for internal testing
8.1.3(Current-carrying parts and their connections)	-	2000	only for internal testing
8.1.4(Clearances and creepage distances)	-	5000	only for internal testing
8.1.5.1(Insulation)	-	2000	only for internal testing
8.1.5.2(Direction of movement)	-	2000	only for internal testing
8.1.5.3(Mounting)	-	2000	only for internal testing
8.1.5.4(Protection)	-	2000	only for internal testing
8.1.8(Terminals)	-	2000	only for internal testing
8.1.8.1(General)	-	2000	only for internal testing
8.1.8.2(Terminal identification and marking)	-	2000	only for internal testing
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	2000	only for internal testing
8.1.10(Provisions for protective earthing)	-	2000	only for internal testing
8.1.11(Enclosures for equipment)	-	15000	only for internal testing
8.1.11.1(Design)	-	2000	only for internal testing
8.1.11.2(Insulation)	-	2000	only for internal testing
8.1.12(Degrees of protection of enclosed equipment)	-	30000	only for internal testing
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	2000	only for internal testing
8.1.14(Limited energy source)	-	2000	only for internal testing
8.1.14.1(General)	-	2000	only for internal testing
8.1.14.2(Limited energy source with galvanic separation)	-	2000	only for internal testing
8.1.14.3(Limited energy source with current limiting impedance)	-	2000	only for internal testing
8.1.15(Stored charge energy circuit)	-	2000	only for internal testing
8.1.16(Fault and abnormal conditions)	-	2000	only for internal testing
8.1.17(Short-circuit and overload protection of ports)	-	2000	only for internal testing
8.2(Performance requirements)	-	2000	only for internal testing
8.2.1(Operating conditions)	-	5000	only for internal testing
8.2.1.1.1(General conditions)	-	5000	only for internal testing
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	2000	only for internal testing
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	2000	only for internal testing
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	2000	only for internal testing
8.2.1.5(Limits of operation of current sensing relays and releases)	-	2000	only for internal testing
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	2000	only for internal testing
8.2.1.5.1.1(General tripping requirements of overload relays)	-	2000	only for internal testing
8.2.1.5.1.2(Thermal memory test verification)	-	2000	only for internal testing
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	2000	only for internal testing
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	2000	only for internal testing
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	2000	only for internal testing
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	2000	only for internal testing
8.2.2(Temperature-rise)	-	20000	only for internal testing
8.2.2.3(Accessible parts)	-	15000	only for internal testing
8.2.2.4(Ambient air temperature)	-	15000	only for internal testing
8.2.2.5(Main circuit)	-	20000	only for internal testing
8.2.2.6(Control circuits)	-	15000	only for internal testing
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	2000	only for internal testing
8.2.3(Dielectric properties)	-	30000	only for internal testing
8.2.3.2(Voltage limiting components between circuits)	-	2000	only for internal testing
8.2.4.3.1(Mechanical durability)	-	50000	only for internal testing
8.2.4.3.2(Electrical durability)	-	120000	only for internal testing
8.2.4.4(Overload current withstand capability of contactors)	-	20000	only for internal testing
8.2.4.5(Coil power consumption)	-	10000	only for internal testing
8.2.4.6(Pole impedance)	-	10000	only for internal testing
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	5000	only for internal testing
8.2.5.1(Performance under short-circuit conditions)	-	10000	only for internal testing
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	20000	only for internal testing
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	5000	only for internal testing
8.3(Electromagnetic compatibility (EMC))	-	5000	only for internal testing
8.3.3(Emission)	-	5000	only for internal testing
9.1.5.2(Environment tests)	-	20000	only for internal testing
9.2.2(Electrical performance of screwless-type clamping units)	-	5000	only for internal testing
9.2.3(Ageing test for screwless-type clamping unit)	-	5000	only for internal testing
9.2.4(Limited energy source test)	-	2000	only for internal testing
9.2.5(Breakdown of components)	-	2000	only for internal testing
9.2.5.2(Breakdown of components test)	-	2000	only for internal testing
9.3.3.2(Operating limits)	-	20000	only for internal testing
9.3.3.2.1.2(Coil power consumption)	-	15000	only for internal testing
9.3.3.2.1.3(Pole impedance)	-	10000	only for internal testing
9.3.3.2.2(Relays and releases)	-	15000	only for internal testing
9.3.3.3.1(Ambient air temperature)	-	15000	only for internal testing
9.3.3.3.2(Measurement of the temperature of parts)	-	15000	only for internal testing
9.3.3.3.3(Temperature-rise of a part)	-	20000	only for internal testing
9.3.3.3.4(Temperature-rise of the main circuit)	-	20000	only for internal testing
9.3.3.3.5(Temperature-rise of control circuits)	-	15000	only for internal testing
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	15000	only for internal testing
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	15000	only for internal testing
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	15000	only for internal testing
9.3.3.6(Operational performance capability)	-	50000	only for internal testing
9.3.4.2.2(prospective current)	-	10000	only for internal testing
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	5000	only for internal testing
9.3.5(Overload current withstand capability of contactors)	-	5000	only for internal testing
9.3.6.2(Operation and operating limits)	-	10000	only for internal testing
9.3.6.3(Dielectric tests)	-	25000	only for internal testing
9.3.6.4(Mechanical operation tests of a MPSD)	-	3000	only for internal testing
9.4.2(Immunity)	-	2000	only for internal testing
9.4.2.2(Electrostatic discharge)	-	2000	only for internal testing
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	2000	only for internal testing
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	2000	only for internal testing
9.4.2.5(Electrical fast transient/bursts)	-	5000	only for internal testing
9.4.2.6(Surges)	-	5000	only for internal testing
9.4.2.7(Power frequency magnetic field)	-	2000	only for internal testing
9.4.2.8(Voltage dips and short-time interruptions)	-	2000	only for internal testing
9.4.2.9(Harmonics in the supply)	-	2000	only for internal testing
9.4.3(Emission)	-	2000	only for internal testing
F.7.2(Tests on products in a new condition)	-	2000	only for internal testing
F.7.3(Test after conventional operational performance)	-	2000	only for internal testing
H.3(Limits of operation of control functions)	-	2000	only for internal testing
H.4(Test of the control functions)	-	2000	only for internal testing
M.8.3(Electromagnetic compatibility (EMC))	-	5000	only for internal testing
M.9.4(Thermal cycling test)	-	3000	only for internal testing
M.9.5(Climatic test)	-	5000	only for internal testing
M.9.7(Critical load current test)	-	3000	only for internal testing
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	25000	only for internal testing
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	30000	only for internal testing
M.9.11(Clearance and creepage distances)	-	5000	only for internal testing
N.3.2(Touch current measurement)	-	2000	only for internal testing
P.2.3(Verification of operational performance capability)	-	5000	only for internal testing
P.2.4.2(Test voltage)	-	2000	only for internal testing
P.2.4.3(Application of the test voltage)	-	2000	only for internal testing
P.4(Test of MPSD for IT system)	-	2000	only for internal testing
Q.5.3(Selectivity determined by test)	-	2000	only for internal testing
8.3.2(Immunity)	-	2000	only for internal testing
8.2.1.5.4.1(Limits of operation of under-current relays)	-	2000	only for internal testing
8.1.2(Materials)	-	2000	only for internal testing
8.1.2.1(General materials requirements)	-	2000	only for internal testing
8.1.2.2(Glow wire testing)	-	20000	only for internal testing
8.1.2.3(Test based on flammability category)	-	2000	only for internal testing
8.1.3(Current-carrying parts and their connections)	-	2000	only for internal testing
8.1.4(Clearances and creepage distances)	-	10000	only for internal testing
8.1.5.1(Insulation)	-	2000	only for internal testing
8.1.5.2(Direction of movement)	-	1000	only for internal testing
8.1.5.3(Mounting)	-	2000	only for internal testing
8.1.5.4(Protection)	-	2000	only for internal testing
8.1.8(Terminals)	-	2000	only for internal testing
8.1.8.1(General)	-	2000	only for internal testing
8.1.8.2(Terminal identification and marking)	-	2000	only for internal testing
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	2000	only for internal testing
8.1.10(Provisions for protective earthing)	-	2000	only for internal testing
8.1.11(Enclosures for equipment)	-	2000	only for internal testing
8.1.11.1(Design)	-	2000	only for internal testing
8.1.11.2(Insulation)	-	2000	only for internal testing
8.1.12(Degrees of protection of enclosed equipment)	-	25000	only for internal testing
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	10000	only for internal testing
8.1.14(Limited energy source)	-	2000	only for internal testing
8.1.14.1(General)	-	2000	only for internal testing
8.1.14.2(Limited energy source with galvanic separation)	-	2000	only for internal testing
8.1.14.3(Limited energy source with current limiting impedance)	-	2000	only for internal testing
8.1.15(Stored charge energy circuit)	-	2000	only for internal testing
8.1.16(Fault and abnormal conditions)	-	2000	only for internal testing
8.1.17(Short-circuit and overload protection of ports)	-	3000	only for internal testing
8.2(Performance requirements)	-	2000	only for internal testing
8.2.1(Operating conditions)	-	10000	only for internal testing
8.2.1.1.1(General conditions)	-	2000	only for internal testing
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	10000	only for internal testing
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	2000	only for internal testing
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	5000	only for internal testing
8.2.1.5(Limits of operation of current sensing relays and releases)	-	2000	only for internal testing
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	2000	only for internal testing
8.2.1.5.1.1(General tripping requirements of overload relays)	-	2000	only for internal testing
8.2.1.5.1.2(Thermal memory test verification)	-	2000	only for internal testing
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	2000	only for internal testing
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	2000	only for internal testing
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	2000	only for internal testing
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	2000	only for internal testing
8.2.2(Temperature-rise)	-	20000	only for internal testing
8.2.2.3(Accessible parts)	-	15000	only for internal testing
8.2.2.4(Ambient air temperature)	-	15000	only for internal testing
8.2.2.5(Main circuit)	-	20000	only for internal testing
8.2.2.6(Control circuits)	-	20000	only for internal testing
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	2000	only for internal testing
8.2.3(Dielectric properties)	-	25000	only for internal testing
8.2.3.2(Voltage limiting components between circuits)	-	2000	only for internal testing
8.2.4.3.1(Mechanical durability)	-	50000	only for internal testing
8.2.4.3.2(Electrical durability)	-	120000	only for internal testing
8.2.4.4(Overload current withstand capability of contactors)	-	5000	only for internal testing
8.2.4.5(Coil power consumption)	-	20000	only for internal testing
8.2.4.6(Pole impedance)	-	10000	only for internal testing
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	2000	only for internal testing
8.2.5.1(Performance under short-circuit conditions)	-	0	This test is under exclusion
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	0	This test is under exclusion
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	0	only for internal testing
8.3(Electromagnetic compatibility (EMC))	-	0	This test is under exclusion
8.3.3(Emission)	-	0	This test is under exclusion
9.1.5.2(Environment tests)	-	10000	This test is under exclusion
9.2.2(Electrical performance of screwless-type clamping units)	-	2000	only for internal testing
9.2.3(Ageing test for screwless-type clamping unit)	-	2000	only for internal testing
9.2.4(Limited energy source test)	-	2000	only for internal testing
9.2.5(Breakdown of components)	-	2000	only for internal testing
9.2.5.2(Breakdown of components test)	-	2000	only for internal testing
9.3.3.2(Operating limits)	-	2000	only for internal testing
9.3.3.2.1.2(Coil power consumption)	-	10000	only for internal testing
9.3.3.2.1.3(Pole impedance)	-	10000	only for internal testing
9.3.3.2.2(Relays and releases)	-	10000	only for internal testing
9.3.3.3.1(Ambient air temperature)	-	20000	only for internal testing
9.3.3.3.2(Measurement of the temperature of parts)	-	20000	only for internal testing
9.3.3.3.3(Temperature-rise of a part)	-	20000	only for internal testing
9.3.3.3.4(Temperature-rise of the main circuit)	-	20000	only for internal testing
9.3.3.3.5(Temperature-rise of control circuits)	-	20000	only for internal testing
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	20000	only for internal testing
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	20000	only for internal testing
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	20000	only for internal testing
9.3.3.6(Operational performance capability)	-	15000	only for internal testing
9.3.4.2.2(prospective current)	-	2000	only for internal testing
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	10000	only for internal testing
9.3.5(Overload current withstand capability of contactors)	-	10000	only for internal testing
9.3.6.2(Operation and operating limits)	-	20000	only for internal testing
9.3.6.3(Dielectric tests)	-	25000	only for internal testing
9.3.6.4(Mechanical operation tests of a MPSD)	-	2000	only for internal testing
9.4.2(Immunity)	-	2000	only for internal testing
9.4.2.2(Electrostatic discharge)	-	2000	only for internal testing
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	2000	only for internal testing
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	2000	only for internal testing
9.4.2.5(Electrical fast transient/bursts)	-	2000	only for internal testing
9.4.2.6(Surges)	-	5000	only for internal testing
9.4.2.7(Power frequency magnetic field)	-	2000	only for internal testing
9.4.2.8(Voltage dips and short-time interruptions)	-	2000	only for internal testing
9.4.2.9(Harmonics in the supply)	-	3000	only for internal testing
9.4.3(Emission)	-	2000	only for internal testing
F.7.2(Tests on products in a new condition)	-	2000	only for internal testing
F.7.3(Test after conventional operational performance)	-	2000	only for internal testing
H.3(Limits of operation of control functions)	-	2000	only for internal testing
H.4(Test of the control functions)	-	2000	only for internal testing
M.8.3(Electromagnetic compatibility (EMC))	-	3000	only for internal testing
M.9.4(Thermal cycling test)	-	2000	only for internal testing
M.9.5(Climatic test)	-	20000	only for internal testing
M.9.7(Critical load current test)	-	2000	only for internal testing
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	30000	only for internal testing
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	30000	only for internal testing
M.9.11(Clearance and creepage distances)	-	5000	only for internal testing
N.3.2(Touch current measurement)	-	2000	only for internal testing
P.2.3(Verification of operational performance capability)	-	2000	only for internal testing
P.2.4.2(Test voltage)	-	2000	only for internal testing
P.2.4.3(Application of the test voltage)	-	2000	only for internal testing
P.4(Test of MPSD for IT system)	-	2000	only for internal testing
Q.5.3(Selectivity determined by test)	-	2000	only for internal testing
8.3.2(Immunity)	-	2000	only for internal testing
8.2.1.5.4.1(Limits of operation of under-current relays)	-	15000	only for internal testing
8.1.2(Materials)	-	2000	only for internal testing
8.1.2.1(General materials requirements)	-	5000	only for internal testing
8.1.2.2(Glow wire testing)	-	15000	only for internal testing
8.1.2.3(Test based on flammability category)	-	1000	only for internal testing
8.1.3(Current-carrying parts and their connections)	-	2000	only for internal testing
8.1.4(Clearances and creepage distances)	-	5000	only for internal testing
8.1.5.1(Insulation)	-	2000	only for internal testing
8.1.5.2(Direction of movement)	-	1000	only for internal testing
8.1.5.3(Mounting)	-	1000	only for internal testing
8.1.5.4(Protection)	-	1000	only for internal testing
8.1.8(Terminals)	-	1000	only for internal testing
8.1.8.1(General)	-	1000	only for internal testing
8.1.8.2(Terminal identification and marking)	-	2000	only for internal testing
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	2000	only for internal testing
8.1.10(Provisions for protective earthing)	-	2000	only for internal testing
8.1.11(Enclosures for equipment)	-	2000	only for internal testing
8.1.11.1(Design)	-	2000	only for internal testing
8.1.11.2(Insulation)	-	2000	only for internal testing
8.1.12(Degrees of protection of enclosed equipment)	-	20000	only for internal testing
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	2000	only for internal testing
8.1.14(Limited energy source)	-	2000	only for internal testing
8.1.14.1(General)	-	2000	only for internal testing
8.1.14.2(Limited energy source with galvanic separation)	-	2000	only for internal testing
8.1.14.3(Limited energy source with current limiting impedance)	-	2000	only for internal testing
8.1.15(Stored charge energy circuit)	-	2000	only for internal testing
8.1.16(Fault and abnormal conditions)	-	2000	only for internal testing
8.1.17(Short-circuit and overload protection of ports)	-	2000	only for internal testing
8.2(Performance requirements)	-	2000	only for internal testing
8.2.1(Operating conditions)	-	2000	only for internal testing
8.2.1.1.1(General conditions)	-	2000	only for internal testing
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	5000	only for internal testing
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	3000	only for internal testing
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	2000	only for internal testing
8.2.1.5(Limits of operation of current sensing relays and releases)	-	2000	only for internal testing
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	5000	only for internal testing
8.2.1.5.1.1(General tripping requirements of overload relays)	-	2000	only for internal testing
8.2.1.5.1.2(Thermal memory test verification)	-	20000	only for internal testing
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	10000	only for internal testing
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	2000	only for internal testing
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	5000	only for internal testing
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	2000	only for internal testing
8.2.2(Temperature-rise)	-	15000	only for internal testing
8.2.2.3(Accessible parts)	-	5000	only for internal testing
8.2.2.4(Ambient air temperature)	-	15000	only for internal testing
8.2.2.5(Main circuit)	-	20000	only for internal testing
8.2.2.6(Control circuits)	-	15000	only for internal testing
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	4000	only for internal testing
8.2.3(Dielectric properties)	-	25000	only for internal testing
8.2.3.2(Voltage limiting components between circuits)	-	4000	only for internal testing
8.2.4.3.1(Mechanical durability)	-	50000	only for internal testing
8.2.4.3.2(Electrical durability)	-	80000	only for internal testing
8.2.4.4(Overload current withstand capability of contactors)	-	5000	only for internal testing
8.2.4.5(Coil power consumption)	-	10000	only for internal testing
8.2.4.6(Pole impedance)	-	10000	only for internal testing
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	2000	only for internal testing
8.2.5.1(Performance under short-circuit conditions)	-	5000	only for internal testing
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	2000	only for internal testing
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	2000	only for internal testing
8.3(Electromagnetic compatibility (EMC))	-	5000	only for internal testing
8.3.3(Emission)	-	2000	only for internal testing
9.1.5.2(Environment tests)	-	10000	only for internal testing
9.2.2(Electrical performance of screwless-type clamping units)	-	2000	only for internal testing
9.2.3(Ageing test for screwless-type clamping unit)	-	2000	only for internal testing
9.2.4(Limited energy source test)	-	2000	only for internal testing
9.2.5(Breakdown of components)	-	2000	only for internal testing
9.2.5.2(Breakdown of components test)	-	2000	only for internal testing
9.3.3.2(Operating limits)	-	5000	only for internal testing
9.3.3.2.1.2(Coil power consumption)	-	10000	only for internal testing
9.3.3.2.1.3(Pole impedance)	-	10000	only for internal testing
9.3.3.2.2(Relays and releases)	-	40000	only for internal testing
9.3.3.3.1(Ambient air temperature)	-	15000	only for internal testing
9.3.3.3.2(Measurement of the temperature of parts)	-	20000	only for internal testing
9.3.3.3.3(Temperature-rise of a part)	-	20000	only for internal testing
9.3.3.3.4(Temperature-rise of the main circuit)	-	25000	only for internal testing
9.3.3.3.5(Temperature-rise of control circuits)	-	15000	only for internal testing
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	15000	only for internal testing
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	15000	only for internal testing
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	15000	only for internal testing
9.3.3.6(Operational performance capability)	-	15000	only for internal testing
9.3.4.2.2(prospective current)	-	1000	only for internal testing
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	2000	only for internal testing
9.3.5(Overload current withstand capability of contactors)	-	50000	only for internal testing
9.3.6.2(Operation and operating limits)	-	40000	only for internal testing
9.3.6.3(Dielectric tests)	-	20000	only for internal testing
9.3.6.4(Mechanical operation tests of a MPSD)	-	2000	only for internal testing
9.4.2(Immunity)	-	2000	only for internal testing
9.4.2.2(Electrostatic discharge)	-	2000	only for internal testing
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	2000	only for internal testing
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	2000	only for internal testing
9.4.2.5(Electrical fast transient/bursts)	-	5000	only for internal testing
9.4.2.6(Surges)	-	5000	only for internal testing
9.4.2.7(Power frequency magnetic field)	-	5000	only for internal testing
9.4.2.8(Voltage dips and short-time interruptions)	-	2000	only for internal testing
9.4.2.9(Harmonics in the supply)	-	2000	only for internal testing
9.4.3(Emission)	-	4000	only for internal testing
F.7.2(Tests on products in a new condition)	-	2000	only for internal testing
F.7.3(Test after conventional operational performance)	-	2000	only for internal testing
H.3(Limits of operation of control functions)	-	2000	only for internal testing
H.4(Test of the control functions)	-	5000	only for internal testing
M.8.3(Electromagnetic compatibility (EMC))	-	2000	only for internal testing
M.9.4(Thermal cycling test)	-	2000	only for internal testing
M.9.5(Climatic test)	-	5000	only for internal testing
M.9.7(Critical load current test)	-	2000	only for internal testing
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	50000	only for internal testing
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	30000	only for internal testing
M.9.11(Clearance and creepage distances)	-	5000	only for internal testing
N.3.2(Touch current measurement)	-	2000	only for internal testing
P.2.3(Verification of operational performance capability)	-	2000	only for internal testing
P.2.4.2(Test voltage)	-	5000	only for internal testing
P.2.4.3(Application of the test voltage)	-	2000	only for internal testing
P.4(Test of MPSD for IT system)	-	2000	only for internal testing
Q.5.3(Selectivity determined by test)	-	2000	only for internal testing
8.3.2(Immunity)	-	2000	only for internal testing
8.2.1.5.4.1(Limits of operation of under-current relays)	-	2000	only for internal testing
8.1.2(Materials)	-	2000	only for internal testing
8.1.2.1(General materials requirements)	-	2000	only for internal testing
8.1.2.2(Glow wire testing)	-	15000	only for internal testing
8.1.2.3(Test based on flammability category)	-	2000	only for internal testing
8.1.3(Current-carrying parts and their connections)	-	5000	only for internal testing
8.1.4(Clearances and creepage distances)	-	2000	only for internal testing
8.1.5.1(Insulation)	-	2000	only for internal testing
8.1.5.2(Direction of movement)	-	2000	only for internal testing
8.1.5.3(Mounting)	-	2000	only for internal testing
8.1.5.4(Protection)	-	2000	only for internal testing
8.1.8(Terminals)	-	2000	only for internal testing
8.1.8.1(General)	-	2000	only for internal testing
8.1.8.2(Terminal identification and marking)	-	5000	only for internal testing
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	2000	only for internal testing
8.1.10(Provisions for protective earthing)	-	3000	only for internal testing
8.1.11(Enclosures for equipment)	-	20000	only for internal testing
8.1.11.1(Design)	-	2000	only for internal testing
8.1.11.2(Insulation)	-	5000	only for internal testing
8.1.12(Degrees of protection of enclosed equipment)	-	30000	only for internal testing
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	5000	only for internal testing
8.1.14(Limited energy source)	-	2000	only for internal testing
8.1.14.1(General)	-	2000	only for internal testing
8.1.14.2(Limited energy source with galvanic separation)	-	2000	only for internal testing
8.1.14.3(Limited energy source with current limiting impedance)	-	3000	only for internal testing
8.1.15(Stored charge energy circuit)	-	3000	only for internal testing
8.1.16(Fault and abnormal conditions)	-	3000	only for internal testing
8.1.17(Short-circuit and overload protection of ports)	-	10000	only for internal testing
8.2(Performance requirements)	-	10000	only for internal testing
8.2.1(Operating conditions)	-	50000	only for internal testing
8.2.1.1.1(General conditions)	-	5000	only for internal testing
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	3000	only for internal testing
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	10000	only for internal testing
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	5000	only for internal testing
8.2.1.5(Limits of operation of current sensing relays and releases)	-	2000	only for internal testing
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	20000	only for internal testing
8.2.1.5.1.1(General tripping requirements of overload relays)	-	10000	only for internal testing
8.2.1.5.1.2(Thermal memory test verification)	-	2000	only for internal testing
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	40000	only for internal testing
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	2000	only for internal testing
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	10000	only for internal testing
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	10000	only for internal testing
8.2.2(Temperature-rise)	-	20000	only for internal testing
8.2.2.3(Accessible parts)	-	15000	only for internal testing
8.2.2.4(Ambient air temperature)	-	15000	only for internal testing
8.2.2.5(Main circuit)	-	20000	only for internal testing
8.2.2.6(Control circuits)	-	15000	only for internal testing
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	2000	only for internal testing
8.2.3(Dielectric properties)	-	25000	only for internal testing
8.2.3.2(Voltage limiting components between circuits)	-	4000	only for internal testing
8.2.4.3.1(Mechanical durability)	-	40000	only for internal testing
8.2.4.3.2(Electrical durability)	-	120000	only for internal testing
8.2.4.4(Overload current withstand capability of contactors)	-	25000	only for internal testing
8.2.4.5(Coil power consumption)	-	10000	only for internal testing
8.2.4.6(Pole impedance)	-	10000	only for internal testing
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	20000	only for internal testing
8.2.5.1(Performance under short-circuit conditions)	-	20000	only for internal testing
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	10000	only for internal testing
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	10000	only for internal testing
8.3(Electromagnetic compatibility (EMC))	-	2000	only for internal testing
8.3.3(Emission)	-	3000	only for internal testing
9.1.5.2(Environment tests)	-	30000	only for internal testing
9.2.2(Electrical performance of screwless-type clamping units)	-	10000	only for internal testing
9.2.3(Ageing test for screwless-type clamping unit)	-	5000	only for internal testing
9.2.4(Limited energy source test)	-	2000	only for internal testing
9.2.5(Breakdown of components)	-	2000	only for internal testing
9.2.5.2(Breakdown of components test)	-	2000	only for internal testing
9.3.3.2(Operating limits)	-	40000	only for internal testing
9.3.3.2.1.2(Coil power consumption)	-	10000	only for internal testing
9.3.3.2.1.3(Pole impedance)	-	10000	only for internal testing
9.3.3.2.2(Relays and releases)	-	10000	only for internal testing
9.3.3.3.1(Ambient air temperature)	-	20000	only for internal testing
9.3.3.3.2(Measurement of the temperature of parts)	-	10000	only for internal testing
9.3.3.3.3(Temperature-rise of a part)	-	150000	only for internal testing
9.3.3.3.4(Temperature-rise of the main circuit)	-	20000	only for internal testing
9.3.3.3.5(Temperature-rise of control circuits)	-	15000	only for internal testing
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	15000	only for internal testing
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	15000	only for internal testing
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	15000	only for internal testing
9.3.3.6(Operational performance capability)	-	150000	only for internal testing
9.3.4.2.2(prospective current)	-	10000	only for internal testing
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	5000	only for internal testing
9.3.5(Overload current withstand capability of contactors)	-	10000	only for internal testing
9.3.6.2(Operation and operating limits)	-	40000	only for internal testing
9.3.6.3(Dielectric tests)	-	25000	only for internal testing
9.3.6.4(Mechanical operation tests of a MPSD)	-	2000	only for internal testing
9.4.2(Immunity)	-	2000	only for internal testing
9.4.2.2(Electrostatic discharge)	-	2000	only for internal testing
9.4.2.3(Radiated radio-frequency electromagnetic field)	-	5000	only for internal testing
9.4.2.4(Conducted disturbances induced by radio-frequency fields)	-	5000	only for internal testing
9.4.2.5(Electrical fast transient/bursts)	-	5000	only for internal testing
9.4.2.6(Surges)	-	5000	only for internal testing
9.4.2.7(Power frequency magnetic field)	-	2000	only for internal testing
9.4.2.8(Voltage dips and short-time interruptions)	-	2000	only for internal testing
9.4.2.9(Harmonics in the supply)	-	2000	only for internal testing
9.4.3(Emission)	-	2000	only for internal testing
F.7.2(Tests on products in a new condition)	-	5000	only for internal testing
F.7.3(Test after conventional operational performance)	-	2000	only for internal testing
H.3(Limits of operation of control functions)	-	5000	only for internal testing
H.4(Test of the control functions)	-	5000	only for internal testing
M.8.3(Electromagnetic compatibility (EMC))	-	5000	only for internal testing
M.9.4(Thermal cycling test)	-	2000	only for internal testing
M.9.5(Climatic test)	-	2000	only for internal testing
M.9.7(Critical load current test)	-	5000	only for internal testing
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	70000	only for internal testing
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	40000	only for internal testing
M.9.11(Clearance and creepage distances)	-	5000	only for internal testing
N.3.2(Touch current measurement)	-	2000	only for internal testing
P.2.3(Verification of operational performance capability)	-	5000	only for internal testing
P.2.4.2(Test voltage)	-	2000	only for internal testing
P.2.4.3(Application of the test voltage)	-	5000	only for internal testing
P.4(Test of MPSD for IT system)	-	2000	only for internal testing
Q.5.3(Selectivity determined by test)	-	2000	only for internal testing
8.3.2(Immunity)	-	2000	only for internal testing
8.2.1.5.4.1(Limits of operation of under-current relays)	-	2000	only for internal testing

05 Jun, 2028

-
Included w.e.f 23.06.2025 Restricted only for Sequence I, II, IV & V. Excluding Cl. 8.1.2.3 (Test based on flammability category). Cl. 8.3 (EMC), Cl. 9.3.4 (Performance under short-circuit conditions), Cl. 9.4 (EMC tests), Q.5.3 (Selectivity determined by test)

IS/IEC 60529 (2001)

Degrees of protection provided by enclosures (IP Code)

Motor starter Starter, Enclosure

170000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Degrees of protection against access to hazardous parts and against solid foreign objects indicated by the first characteristic numeral)	-	20000	Only for internal testing
Cl-5.1(Protection against access to hazardous parts)	-	20000	Only for internal testing
Cl-5.2(Protection against solid foreign objects)	-	25000	Only for internal testing
Cl-6(Degrees of protectlon against ingress of water indicated 'by the second characteristic numeral)	-	25000	Only for internal testing
Cl-7(Degrees of protection against access to hazardous parts indicated by the additional letter)	-	25000	Only for internal testing
Cl-8(Supplementary letter)	-	25000	Only for internal testing
Cl-10(Marking)	-	20000	Only for internal testing

05 Jun, 2028

-
-

IS/IEC 60947 : Part 4 : Sec 1 (2012)

Low - Voltage switchgear and controlgear: Part 4 contactors and motor - Starters: Sec 1 electromechanical contactors and motor - Starters (First Revision)

Starter, Contactor, Thermal Overload Relay

3260000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9.3.3.3.4 (Temperature rise of the main circuit )	-	30000	Only for internal testing
9.3.3.3.5( Temperature rise of control circuit)	-	20000	Only for internal testing
9.3.3.3.6( Temperature rise of coils and electromagnets )	-	20000	Only for internal testing
9.3.3.3.7 (Temperature rise of auxiliary circuits )	-	20000	Only for internal testing
9.3.3.4 (Dielectric properties )	-	50000	Only for internal testing
9.3.3.1(Ambient air temperatur)	-	20000	Only for internal testing
9.3.3.2(Operating limits)	-	50000	Only for internal testing
9.3.3.5("verification of rated making and breaking capacities, change-over ability and reversibility, where applicable")	-	100000	Only for internal testing
9.3.3.6(verification of conventional operational performance)	-	80000	Only for internal testing
9.3.5(Overload current withstand capability of contactors)	-	30000	Only for internal testing
9.2.2(Electrical performance of screwless-type clamping unit)	-	30000	Only for internal testing
9.1.2 (j) (Annex C of IEC 60947-1)(verification of degrees of protection of enclosed contactors and starters)	-	30000	Only for internal testing
B.3(Electrical durability)	-	120000	Only for internal testing
5.3.7 (Pole impedance of a contactor (Z) )	-	30000	Only for internal testing
5.2(Type of equipment )	-	10000	Only for internal testing
5.2.1(Kind of equipment)	-	20000	Only for internal testing
5.2.1(Kind of equipment)	-	10000	Only for internal testing
5.2.1(Kind of equipment)	-	10000	Only for internal testing
5.2.1(Kind of equipment)	-	10000	Only for internal testing
5.2.1(Kind of equipment)	-	10000	Only for internal testing
5.2.1(Kind of equipment)	-	10000	Only for internal testing
5.2.2(Number of poles)	-	10000	Only for internal testing
5.2.3(Kind of current)	-	10000	Only for internal testing
5.2.4 (Interrupting medium )	-	10000	Only for internal testing
5.2.5.1( Operating conditions of the equipment - Method of Operation)	-	10000	Only for internal testing
5.2.5.2(Method of control )	-	10000	Only for internal testing
5.3.1.1(Rated voltages : Rated operational voltage (Ue) )	-	20000	Only for internal testing
5.7.3 (Characteristic values : Release with shunt coil, under-voltage (under-current), over-voltage (instantaneous over current), current or voltage imbalance and phase reversal opening relay or release)	-	20000	Only for internal testing
5.7.3 (Characteristic values : Release with shunt coil, under-voltage (under-current), over-voltage (instantaneous over current), current or voltage imbalance and phase reversal opening relay or release)	-	20000	Only for internal testing
5.7.3 (Characteristic values : Release with shunt coil, under-voltage (under-current), over-voltage (instantaneous over current), current or voltage imbalance and phase reversal opening relay or release)	-	20000	Only for internal testing
5.7.3 (Characteristic values : Release with shunt coil, under-voltage (under-current), over-voltage (instantaneous over current), current or voltage imbalance and phase reversal opening relay or release)	-	20000	Only for internal testing
5.7.3 (Characteristic values : Release with shunt coil, under-voltage (under-current), over-voltage (instantaneous over current), current or voltage imbalance and phase reversal opening relay or release)	-	20000	Only for internal testing
5.2.5.3(Method of change-over for particular types of starters )	-	10000	Only for internal testing
5.2.5.4(Method of connecting for particular types of starters )	-	10000	Only for internal testing
5.3.1.1.1 (Rated stator operational voltage (Ues) )	-	10000	Only for internal testing
5.3.1.1.2( Rated rotor operational voltage (Uer) )	-	10000	Only for internal testing
5.3.1.3 (Rated impulse withstand voltage (Uimp) )	-	10000	Only for internal testing
5.3.1.4 (Rated starting voltage of an auto-transformer starter )	-	10000	Only for internal testing
5.3.2.1 (Conventional free air thermal current (Ith) )	-	10000	Only for internal testing
5.3.2.2 (Conventional enclosed thermal current (Ithe) )	-	10000	Only for internal testing
5.3.2.3( Conventional stator thermal current (Iths))	-	10000	Only for internal testing
5.3.2.4 (Conventional rotor thermal current (Ithr))	-	10000	Only for internal testing
5.3.2.5( Rated operational currents (Ie) or rated operational powers )	-	10000	Only for internal testing
5.3.2.6( Rated stator operational current (Ies) or rated stator operational power )	-	10000	Only for internal testing
5.3.2.7 (Rated rotor operational current (Ier) )	-	10000	Only for internal testing
5.3.2.8 (Rated uninterrupted current (Iu))	-	10000	Only for internal testing
5.3.3 (Rated frequency )	-	10000	Only for internal testing
5.3.4 (Rated duties )	-	10000	Only for internal testing
5.3.4.1 (Eight-hour duty (continuous duty)	-	20000	Only for internal testing
5.3.4.2 (Uninterrupted duty )	-	20000	Only for internal testing
5.3.4.4( Temporary duty )	-	20000	Only for internal testing
Cl.9.1.5.2 (Annex Q of IS/IEC 60947-1)(Special tests)	-	0	Testing facility not available
6.1.1( Identification)	-	10000	Only for internal testing
6.1.1( Identification)	-	10000	Only for internal testing
6.1.1( Identification)	-	10000	Only for internal testing
6.1.2(Characteristics: )	-	10000	Only for internal testing
6.1.2(Control circuits)	-	10000	Only for internal testing
6.1.2(Overload relays and releases)	-	10000	Only for internal testing
6.1.2(Overload relays and releases)	-	20000	Only for internal testing
6.1.2(Rheostatic rotor starters)	-	20000	Only for internal testing
6.1.2(Rheostatic rotor starters)	-	20000	Only for internal testing
6.1.2(Rheostatic rotor starters)	-	20000	Only for internal testing
6.1.2(Auto-transformer starters: )	-	20000	Only for internal testing
6.1.2(Vacuum contactors and starters: )	-	20000	Only for internal testing
6.1.2(Vacuum contactors and starters: )	-	20000	Only for internal testing
6.1.2(Vacuum contactors and starters: )	-	20000	Only for internal testing
6.2(Marking )	-	10000	Only for internal testing
5.10.1( Types : Time-delay devices)	-	10000	Only for internal testing
5.10.1( Types : Time-delay devices)	-	10000	Only for internal testing
5.10.1( Types : Time-delay devices)	-	10000	Only for internal testing
5.10.2 (Characteristics )	-	10000	Only for internal testing
5.10.2 (Characteristics )	-	10000	Only for internal testing
5.10.2 (Characteristics )	-	10000	Only for internal testing
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	10000	Only for internal testing
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	10000	Only for internal testing
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	10000	Only for internal testing
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	10000	Only for internal testing
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	10000	Only for internal testing
5.11(Types and characteristics of auto-transformers for two-step auto-transformer starters )	-	10000	Only for internal testing
5.12( Types and characteristics of starting resistors for rheostatic rotor starters )	-	10000	Only for internal testing
5.12( Types and characteristics of starting resistors for rheostatic rotor starters )	-	10000	Only for internal testing
5.12( Types and characteristics of starting resistors for rheostatic rotor starters )	-	10000	Only for internal testing
5.12( Types and characteristics of starting resistors for rheostatic rotor starters )	-	10000	Only for internal testing
5.7.3 (Characteristic values : Overload relay)	-	20000	Only for internal testing
5.5( Control circuit)	-	20000	Only for internal testing
5.5( Control circuit)	-	20000	Only for internal testing
5.5( Control circuit)	-	20000	Only for internal testing
5.5( Control circuit)	-	20000	Only for internal testing
5.5( Control circuit)	-	20000	Only for internal testing
5.5( Control circuit)	-	20000	Only for internal testing
5.6( Auxiliary circuits)	-	20000	Only for internal testing
5.7.2( Types of relay or releas)	-	20000	Only for internal testing
5.3.1.2 (Rated insulation voltage (Ui) )	-	20000	Only for internal testing
5.3.1.2.1 (Rated stator insulation voltage (Uis)	-	20000	Only for internal testing
5.3.1.2.2 (Rated rotor insulation voltage (Uir) )	-	20000	Only for internal testing
5.7.3 (Characteristic values : Overload relay)	-	20000	Only for internal testing
5.7.3 (Characteristic values : Overload relay)	-	20000	Only for internal testing
5.7.3 (Characteristic values : Overload relay)	-	20000	Only for internal testing
5.7.3 (Characteristic values : Overload relay)	-	20000	Only for internal testing
5.7.3 (Characteristic values : Overload relay)	-	20000	Only for internal testing
5.7.3 (Characteristic values : Overload relay)	-	20000	Only for internal testing
5.7.3 (Characteristic values : Release with residual current sensing relay:)	-	0	Testing facility not available
5.7.3 (Characteristic values : Release with residual current sensing relay:)	-	0	Testing facility not available
5.7.3 (Characteristic values : Release with residual current sensing relay:)	-	0	Testing facility not available
5.7.3 (Characteristic values : Release with residual current sensing relay:)	-	0	Testing facility not available
5.7.3 (Characteristic values : Release with residual current sensing relay:)	-	0	Testing facility not available
5.7.4( Designation and current settings of overload relays)	-	20000	Only for internal testing
5.7.5( Time-current characteristics of overload relays )	-	20000	Only for internal testing
5.7.6 (Influence of ambient air temperature )	-	20000	Only for internal testing
5.8(Co-ordination with short-circuit protective devices )	-	0	Testing facility not available
8.1.1(Constructional requirements : Genaral)	-	10000	Only for internal testing
8.1.2.1( General materials requirements )	-	20000	Only for internal testing
8.1.2.2 (Glow wire testing )	-	15000	Only for internal testing
8.1.2.3 (Test based on flammability category )	-	0	Testing facility not available
8.1.3( Current-carrying parts and their connections )	-	20000	Only for internal testing
8.1.4(Clearance)	-	10000	Only for internal testing
8.1.4( creepage distances )	-	10000	Only for internal testing
8.1.5(Actuator )	-	10000	Only for internal testing
8.1.5.1( Insulation)	-	10000	Only for internal testing
8.1.5.2 (Direction of movement)	-	10000	Only for internal testing
8.1.5.3( Mounting )	-	10000	Only for internal testing
8.1.6.1 (Indicating means )	-	10000	Only for internal testing
8.1.6.2( Indication by the actuator)	-	10000	Only for internal testing
8.1.7( Additional requirements for equipment suitable for isolation )	-	10000	Only for internal testing
8.1.8( Terminals)	-	10000	Only for internal testing
8.2.2.3 (Accessible part)	-	10000	Only for internal testing
8.2.2.4( Ambient air temperatur)	-	10000	Only for internal testing
9.1.2, (i) (8.2.4 of IEC 60947-1:2007)(Mechanical properties of terminals)	-	30000	Only for internal testing
7(Normal service, mounting and transport conditions )	-	15000	Only for internal testing
H.3(Limits of operation of control functions)	-	0	Testing facility not available
H.4(Test of the control functions)	-	0	Testing facility not available
F.7.2(Tests on products in a new condition)	-	0	Testing facility not available
F.7.3(Test after conventional operational performance)	-	40000	Only for internal testing
5.3.4.3 (Intermittent periodic duty or intermittent duty )	-	20000	Only for internal testing
5.3.4.5( Periodic duty )	-	20000	Only for internal testing
5.3.5.1 (Ability to withstand motor switching overload currents )	-	20000	Only for internal testing
5.3.5 (Normal load and overload characteristics )	-	20000	Only for internal testing
5.3.5.2 (Rated making capacity )	-	20000	Only for internal testing
5.3.5.3 (Rated breaking capacity )	-	20000	Only for internal testing
5.3.5.4 (Conventional operational performance )	-	100000	Only for internal testing
5.3.5.5( Starting and stopping characteristics of starters )	-	10000	Only for internal testing
5.3.5.5( Starting and stopping characteristics of starters )	-	20000	Only for internal testing
5.3.5.5( Starting and stopping characteristics of starters )	-	10000	Only for internal testing
5.3.5.5( Starting and stopping characteristics of starters )	-	10000	Only for internal testing
5.3.5.5( Starting and stopping characteristics of starters )	-	10000	Only for internal testing
5.3.5.5.1 (Starting characteristics of rheostatic rotor starters )	-	10000	Only for internal testing
5.3.5.5.2( Standard conditions for making and breaking corresponding to the starting characteristics for rheostatic rotor starters)	-	20000	Only for internal testing
5.3.5.5.3( Starting characteristics for two-step auto-transformer starters)	-	20000	Only for internal testing
8.1.10(Provisions for protective earthing)	-	0	Testing facility not available
8.1.11(Enclosures for equipment)	-	20000	Only for internal testing
8.1.12(Degrees of protection of enclosed equipment)	-	30000	Only for internal testing
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	0	Testing facility not available
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	0	Testing facility not available
B.2(Mechanical durability)	-	900000	Only for internal testing
9.2.3(Ageing test for screwless-type clamping units)	-	0	Testing facility not available
8.2.2(Temperature Rise)	-	30000	Only for internal testing
8.2.4.3(Durability)	-	90000	Only for internal testing
8.2.5.2(Co-ordination at the crossover current between starter and associated SCPD)	-	0	Testing facility not available
9.4.2(Immunity)	-	0	Testing facility not available (Under Exclusion)
9.4.3(Emission)	-	0	Testing facility not available (Under Exclusion)
9.4.1(General)	-	10000	only for internal testing
9.3.6.2(Operation and operating limits)	-	20000	only for internal testing
9.3.6.2(Operation and operating limits)	-	20000	only for internal testing
9.3.6.3(Dielectric tests)	-	20000	only for internal testing
9.3.3.2.1(Power-operated equipment)	-	30000	only for internal testing
9.3.3.2.1.2(Coil power consumption)	-	30000	only for internal testing
9.3.3.2.2(Relays and releases)	-	30000	only for internal testing
9.3.4.2.3(Leakage current Measurement)	-	15000	only for internal testing
9.3.4.2.3(Verification of dielectric Withstand)	-	20000	only for internal testing
9.3.4.2.3(Leakage current Measurement)	-	15000	only for internal testing
9.3.4(Performance under short-circuit conditions)	-	0	Testing facility not available ( short circuit test under exclusion)
9.2.1(General)	-	10000	only for internal testing
9.3.3.4.1( Type tests )	-	20000	only for internal testing
9.3.3.3.8 (Temperature rise of starting resistors for rheostatic rotor starters )	-	30000	only for internal testing
9.3.3.3.9( Temperature rise of the auto-transformer for two-step auto-transformer starters)	-	30000	only for internal testing
9.3.3.3.2 (Measurement of the temperature of parts )	-	30000	only for internal testing
9.3.3.3.3( Temperature rise of a part )	-	30000	only for internal testing
5.3.6 (Rated conditional short-circuit current)	-	0	Testing facility not available (short circuit test under exclusion)
5.4.1(Utilization category : General)	-	10000	only for internal testing
5.4.2(Assignment of utilization categories based on the results of tests )	-	10000	only for internal testing
5.4.2(Assignment of utilization categories based on the results of tests )	-	10000	only for internal testing
6.1.2(Safety and installation: )	-	10000	only for internal testing
5.3.5.5( Starting and stopping characteristics of starters )	-	10000	only for internal testing

05 Jun, 2028

-
Exclusion: 9.3.4 (Performance under short-circuit conditions), 9.4.2 (Immunity), 9.4.1 (General), 9.4.3 (Emission)

IS/IEC 60947 : PART 3 (2012)

Low - Voltage switchgear and controlgear: Part 3 switches, disconnectors, switch disconnectors and fuse - Combination units (First Revision)

SD F1/F2/F3 & SDF/FD/SFU 32-200A

3410000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3.3.1(Temperature-rise)	-	25000	Test Lab for internal products.
8.3.3.2(Test of dielectric properties)	-	60000	Test Lab for internal products.
8.3.3.4(Dielectric verification)	-	30000	Test Lab for internal products.
8.3.3.5(Leakage current)	-	25000	Test Lab for internal products.
8.3.3.6(Temperature-rise verification)	-	25000	Test Lab for internal products.
8.3.3.7(Strength of actuator mechanism)	-	20000	Test Lab for internal products.
8.3.4.1.5(Operational performance test)	-	50000	Test Lab for internal products.
8.3.4.1.6(Operational performance test)	-	50000	Test Lab for internal products.
8.3.4.2(Dielectric verification)	-	25000	Test Lab for internal products.
8.3.4.3(Leakage current)	-	30000	Test Lab for internal products.
8.3.4.4(Temperature-rise verification)	-	25000	Test Lab for internal products.
8.3.5.3(Dielectric verification)	-	25000	Test Lab for internal products.
8.3.5.4(Leakage current)	-	30000	Test Lab for internal products.
8.3.5.5(Temperature-rise verification)	-	40000	Test Lab for internal products.
8.3.6.3(Dielectric verification)	-	25000	Test Lab for internal products.
8.3.6.4(Leakage current)	-	30000	Test Lab for internal products.
8.3.6.5(Temperature-rise verification)	-	40000	Test Lab for internal products.
8.3.7.2(Dielectric verification)	-	25000	Test Lab for internal products.
8.3.7.3(Leakage current)	-	30000	Test Lab for internal products.
8.3.7.4(Temperature-rise verification)	-	40000	Test Lab for internal products.
8.3.3.3.5(Behaviour of equipment during making and breaking capacity tests)	-	60000	Test Lab for internal products.
8.3.3.3.6(Condition of equipment after the making and breaking capacity tests)	-	60000	Test Lab for internal products.
3.1(Classification)	-	10000	Test Lab for internal products.
3.2(Classification)	-	10000	Test Lab for internal products.
3.3(Classification)	-	15000	Test Lab for internal products.
3.3(Classification)	-	15000	Test Lab for internal products.
4.1(Characteristics)	-	15000	Test Lab for internal products.
4.2(Characteristics)	-	15000	Test Lab for internal products.
4.3(Characteristics)	-	15000	Test Lab for internal products.
4.3.1.1(Characteristics)	-	15000	Test Lab for internal products.
4.3.1.2(Characteristics)	-	15000	Test Lab for internal products.
4.3.1.3(Characteristics)	-	15000	-
4.3.2(Characteristics)	-	15000	Test Lab for internal products.
4.3.2.1(Characteristics)	-	15000	Test Lab for internal products.
4.3.2.2(Characteristics)	-	15000	Test Lab for internal products.
4.3.2.3(Characteristics)	-	15000	Test Lab for internal products.
4.3.2.4(Characteristics)	-	15000	Test Lab for internal products.
4..3.3(Characteristics)	-	15000	Test Lab for internal products.
4..3.4.1(Characteristics)	-	15000	Test Lab for internal products.
4..3.4(Characteristics)	-	15000	Test Lab for internal products.
4..3.4.2(Characteristics)	-	15000	Test Lab for internal products.
4.3.5.1(Characteristics)	-	15000	Test Lab for internal products.
4.3.5.2(Characteristics)	-	15000	Test Lab for internal products.
4.3.5.3(Characteristics)	-	15000	Test Lab for internal products.
4.3.6.1(Characteristics)	-	15000	Test Lab for internal products.
4.3.6.2(Characteristics)	-	15000	Test Lab for internal products.
4.3.6.4(Characteristics)	-	15000	Test Lab for internal products.
4.4(Characteristics)	-	15000	Test Lab for internal products.
4.5(Characteristics)	-	15000	Test Lab for internal products.
4.6(Characteristics)	-	15000	Test Lab for internal products.
4.7(Characteristics)	-	15000	Test Lab for internal products.
4.8(Characteristics)	-	15000	Test Lab for internal products.
5.1(Product information)	-	15000	Test Lab for internal products.
5.2(Product information)	-	15000	Test Lab for internal products.
5.2.3(Product information)	-	15000	Test Lab for internal products.
5.2.4(Product information)	-	15000	Test Lab for internal products.
8.2.1.1.1(Test of resistance to abnormal heat and fire)	-	60000	Test Lab for internal products.
8.2.1.1.2(Test of resistance to abnormal heat and fire)	-	60000	Test Lab for internal products.
8.2.3(Enclosures for equipment)	-	20000	Test Lab for internal products.
8.2.4(Mechanical properties of terminals)	-	50000	Test Lab for internal products.
8.2.4.2(Tests of mechanical strength of terminals)	-	60000	Test Lab for internal products.
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	60000	Test Lab for internal products.
8.2.4.4.1(Pull-out test)	-	50000	Test Lab for internal products.
8.2.4.4.2(Flat copper conductors)	-	40000	Test Lab for internal products.
8.1.3.2(Mechanical operation test)	-	70000	Test Lab for internal products.
8.1.3.3(Dielectric test)	-	60000	Test Lab for internal products.
8.1.4(Sampling tests)	-	30000	Test Lab for internal products.
8.3.3.1(Temperature-rise)	-	30000	Test Lab for internal products.
8.3.3.1(Temperature-rise)	-	30000	Test Lab for internal products.
8.3.3.1(Temperature-rise)	-	30000	Test Lab for internal products.
8.3.3.1(Temperature-rise)	-	30000	Test Lab for internal products.
8.3.3.2(Test of dielectric properties)	-	60000	Test Lab for internal products.
8.3.3.2(Test of dielectric properties)	-	60000	Test Lab for internal products.
8.3.3.2(Test of dielectric properties)	-	60000	Test Lab for internal products.
8.3.3.6(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.3.6(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.3.6(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.3.6(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.3.6(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.3.6(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.3.7(Strength of actuator mechanism)	-	25000	Test Lab for internal products.
8.3.4.4(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.4.4(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.4.4(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.4.4(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.4.4(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.4.4(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.5.1( Short-time withstand current test)	-	0	Facilities not available
8.3.5.1( Short-time withstand current test)	-	0	Facilities not available
8.3.5.2(Short-circuit making capacity test)	-	0	Facilities not available
8.3.5.2(Short-circuit making capacity test)	-	0	Facilities not available
8.3.5.5(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.5.5(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.5.5(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.5.5(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.5.5(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.5.5(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.6.2, 1 a)(Fuse protected short-circuit withstand)	-	0	Facilities not available
8.3.6.2, 1 a)(Fuse protected short-circuit withstand)	-	0	Facilities not available
8.3.6.5(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.6.5(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.6.5(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.6.5(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.6.5(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.6.5(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.7.1(Overload test)	-	10000	Test Lab for internal products.
8.3.7.4(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.7.4(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.7.4(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.7.4(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.7.4(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.3.7.4(Temperature-rise verification)	-	30000	Test Lab for internal products.
8.4(Electromagnetic compatibility tests)	-	0	Facilities not available
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	0	Facilities not available
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	0	Facilities not available
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	0	Facilities not available
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	0	Facilities not available
8.4.1.2(Immunity (Equipment incorporating electronic circuits))	-	0	Facilities not available
8.4.2.2(Emission (Equipment incorporating electronic circuits ))	-	0	Facilities not available
8.5.1(Mechanical durability)	-	40000	Test Lab for internal products.
8.5.2(Electrical durability)	-	70000	Test Lab for internal products.
7.1(Constructional Requirements (except those covered under type tests))	-	40000	Test Lab for internal products.
8.3.3.3(Making and breaking capacities)	-	50000	Test Lab for internal products.
8.3.6.2, 1 b)(Fuse protected short-circuit making)	-	0	Facilities not available
7.3.2(Electrostatic discharge)	-	0	Facilities not available
7.3.2(Electrostatic discharge)	-	0	Facilities not available
7.3.2(Radiated RF Electromagnetic Field)	-	0	Facilities not available
7.3.2(Fast transient/ burst)	-	0	Facilities not available
7.3.2(Surge)	-	0	Facilities not available
7.3.2(Conducted disturbances induced by RF fields)	-	0	Facilities not available
7.3.2(Emission)	-	0	Facilities not available

05 Jun, 2028

-
Exclusion: 8.3.5.1 ( Short-time withstand current test), 8.3.5.2 (Short-circuit making capacity test)

IS/IEC 60947 : Part 2 (2016)

Low - Voltage switchgear and controlgear: Part 2 circuit - Breakers (First Revision)

F1-TUMU/F2-TMTU/F3-TMTU/F3-LSIG/F2-LSIG MCCB

1674000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3.3.2(Tripping limits and characteristics)	-	100000	only for internal testing
8.3.3.3(Test of dielectric properties)	-	65000	only for internal testing
8.3.3.4(Mechanical operation and operational performance capability)	-	90000	only for internal testing
8.3.3.5(Overload performance)	-	150000	only for internal testing
8.3.3.6(Verification of dielectric withstand)	-	30000	only for internal testing
8.3.3.7(Verification of temperature-rise)	-	25000	only for internal testing
8.3.3.8(Verification of Overload releases)	-	4000	only for internal testing
8.3.3.9(Verification of undervoltage and shunt releases)	-	10000	only for internal testing
8.3.3.10(Verification of main contact position)	-	5000	only for internal testing
8.3.4.3(Verification of operational performance capability)	-	50000	only for internal testing
8.3.5.4(Verification of dielectric withstand)	-	30000	only for internal testing
8.3.6.6(Verification of dielectric withstand)	-	30000	only for internal testing
8.3.7.4(Verification of dielectric withstand)	-	30000	only for internal testing
8.3.7.8(Verification of dielectric withstand)	-	30000	only for internal testing
8.3.8.6(Verification of dielectric withstand)	-	30000	only for internal testing
8.3.4.5(Verifiation of temperature-rise)	-	25000	only for internal testing
8.3.6.4(Verification of temperature-rise)	-	25000	only for internal testing
8.3.7.3(Verification of temperature-rise)	-	25000	only for internal testing
8.3.8.7(Verification of temperature-rise)	-	25000	only for internal testing
8.3.4.6(Verification of Overload releases)	-	5000	only for internal testing
8.3.5.2(Verification of Overload releases)	-	5000	only for internal testing
8.3.5.5(Verification of Overload releases)	-	5000	only for internal testing
8.3.6.2(Verification of Overload releases)	-	5000	only for internal testing
8.3.6.7(Verification of Overload releases)	-	5000	only for internal testing
8.3.7.5(Verification of Overload releases)	-	5000	only for internal testing
8.3.7.9(Verification of Overload releases)	-	5000	only for internal testing
8.3.8.2(Verification of Overload releases)	-	5000	only for internal testing
8.3.8.8(Verification of Overload releases)	-	5000	only for internal testing
C.3(verification of dielectric withstand)	-	25000	only for internal testing
C.4(verification of overload releases)	-	5000	only for internal testing
H.2(individual pole short circuit (IIT))	-	95000	only for internal testing
H.3(verification of dielectric withstand)	-	25000	only for internal testing
H.4(verification of overload releases)	-	5000	only for internal testing
8.3.8.5(Verification of operational performance capability)	-	50000	only for internal testing
8.4.2(Mechanical operation tests)	-	15000	only for internal testing
8.4.3(Verification of the calibration of overcurrent releases)	-	10000	only for internal testing
8.4.4(Verification of the operation of undervoltage and shunt releases)	-	10000	only for internal testing
8.4.5(Additional tests for CBRs)	-	0	Test is not available
8.4.6(Dielectric tests)	-	60000	only for internal testing
8.4.7(Test for the verifiacation of clearances less than those corresponding to case A of Table 13 of IEC 60947-1:2007)	-	3000	only for internal testing
8.3.4.4(Verification of dielectric withstand)	-	28000	only for internal testing
B.8.2(Operating characteristics)	-	10000	only for internal testing
B.8.3(Dielectric Properties)	-	60000	only for internal testing
B.8.4(Operation of the test device at the limits of rated voltage)	-	10000	only for internal testing
B.8.5(Limiting value of the non-operating current under over-current conditions)	-	0	Test is not available
B.8.6(Resistance against unwanted tripping due to surge currents resulting from impulse voltage)	-	0	Test is not available
B.8.7(Behavior in the case of an earth fault current comprising a d.c. component)	-	0	Test is not available
B.8.8(Behavior in the case of failure of line voltage for CBRs classified under B.3.1.2.1)	-	0	Test is not available
B.8.9(Behavior in the case of failure of line voltage for CBRs classified under B.3.1.2.2)	-	0	Test is not available
7.3 Annexure J Table J.1(Electrostatic discharges)	-	0	Test is not available
7.3 Annexure J Table J.1("Radiated radio-frequency electromagnetic fields")	-	0	Test is not available
7.3 Annexure J Table J.1("Electrical fast transients/bursts")	-	0	Test is not available
7.3 Annexure J Table J.1("Radiated radio-frequency electromagnetic fields")	-	0	Test is not available
7.3 Annexure J Table J.1(Surges)	-	0	Test is not available
7.3 Annexure J Table J.1("Conducted disturbances induced by radio frequency fields")	-	0	Test is not available
7.3 Annexure J Table J.1("Power frequency magnetic fields")	-	0	Test is not available
7.3 Annexure J Table J.1("Voltage dips and interruptions")	-	0	Test is not available
7.3 Annexure J Table J.3("Conducted RF disturbances 150 kHz to 30 MHz")	-	0	Test is not available
7.3 Annexure J Table J.3("Radiated RF disturbances 30 MHz to 1 000 MHz")	-	0	Test is not available
8.3.4.1(General)	-	10000	Test sequence II ( Pre & post tests are available Except short circuit )- Only for internal testing )
8.3.4.2(Test of service short circuit breaking capacity)	-	10000	short circuit test is not available (under exclusion )
8.3.5.1(General)	-	10000	Test sequence III ( Pre & post tests are available Except short circuit )- Only for internal testing)
8.3.5.3(rated short circuit breaking capacity (sequence III))	-	0	short circuit test is not available (under exclusion )
8.3.6.1(General)	-	10000	Test sequence IV ( Pre & post tests are available Except short circuit )- Only for internal testing
8.3.6.3(rated short circuit withstand current (sequence IV))	-	0	short circuit test is not available (under exclusion)
8.3.6.5(Short-circuit breaking capacity at maximum short-time withstand current)	-	0	short circuit test is not available (under exclusion)
8.3.7.1(General)	-	10000	Test sequence V ( Pre & post tests are available Except short circuit )- Only for internal testing
8.3.7.2((stage 1) short circuit at the selectivity limit current (sequence V))	-	0	short circuit test is not available (under exclusion)
8.3.7.6((stage 2) short circuit at 1.1 time the take-over current (sequence V))	-	0	short circuit test is not available (under exclusion)
8.3.7.7((stage 2) short circuit at rated ultimate short circuit breaking capacity (sequence V))	-	0	short circuit test is not available (under exclusion)
8.3.8.1(General)	-	10000	Test sequence VI ( Pre & post tests are available Except short circuit )- Only for internal testing
8.3.8.3(rated short time withstand current (sequence VI))	-	0	short circuit test is not available (under exclusion)
8.3.8.4(rated service short circuit breaking capacity (sequence VI))	-	0	short circuit test is not available (under exclusion)
Cl.8.5 (Annex Q of IS/IEC 60947-1)(Special tests)	-	0	only Damp heat test for internal testing
Annex G(Power loss)	-	0	only for internal testing Note- Annex G test (Power loss) are not available
Annex L(Circuit-breakers not fulfilling the requirements for overcurrent protection)	-	0	only for internal testing Note- Annex L test (Circuit-breakers not fulfilling the requirements for overcurrent protection) are not available
Annex M(Modular residual current devices (without integral current breaking device))	-	0	only for internal testing Note- Annex M test (Modular residual current devices (without integral current breaking device) are not available
Annex N(Electromagnetic compatibility (EMC))	-	0	only for internal testing Note- Annex N test (Modular residual current devices (without integral current breaking device) are not available
Annex O(Electromagnetic compatibility (EMC))	-	0	only for internal testing Note- Annex O test (Electromagnetic compatibility (EMC) are not available
Annex P(DC circuit-breakers for use in photovoltaic (PV) applications)	-	0	only for internal testing Note- Annex P test (DC circuit-breakers for use in photovoltaic (PV) applications) are not available
Annex R(Circuit-breakers incorporating residual current protection with automatic re-closing functions)	-	0	only for internal testing Note- Annex R test (Circuit-breakers incorporating residual current protection with automatic re-closing functions) are not available
8.3.6.1(General)	-	10000	Test sequence IV ( Pre & post tests are available Except short circuit )- Only for internal testing
8.3.7.2(Short-circuit at the selectivity limit current)	-	0	short circuit test is not available (under exclusion)
8.3.5.3(Rated ultimate short-circuit breaking capacity)	-	0	short circuit test is not available (under exclusion)
8.3.6.3(Rated short-time withstand current)	-	0	short circuit test is not available (under exclusion)
8.3.7.6(Short-circuit at 1,1 times take-over current)	-	0	short circuit test is not available (under exclusion)
8.3.7.7(Short-circuit at ultimate short-circuit breaking capacity)	-	0	short circuit test is not available (under exclusion)
8.3.8.3(Rated short-time withstand current)	-	0	short circuit test is not available (under exclusion)
8.3.4.2(rated short circuit breaking capacity (sequence II))	-	0	short circuit test is not available (under exclusion)
8.3.8.1(General)	-	10000	Test sequence VI ( Pre & post tests are available Except short circuit )- Only for internal testing
8.3.8.2(verification of overload releases (sequence VI))	-	4000	short circuit test is not available (under exclusion)
8.3.4.1(General)	-	10000	Test sequence II ( Pre & post tests are available Except short circuit )- Only for internal testing )
C.2(individual pole short circuit breaking capacity (Isu))	-	0	short circuit test is not available (under exclusion)
8.3.9(Critical d.c. load current test)	-	0	Critical d.c. load current test -under exclusion
8.3.8.5(verification of operational performance capability (sequence VI))	-	0	only for internal testing
8.3.8.6(verification of dielectric withstand (sequence VI))	-	28000	only for internal testing
8.3.4.3(verification of operational performance capability (sequence II))	-	50000	only for internal testing
8.3.4.4(verification of dielectric withstand (sequnce II))	-	28000	only for internal testing
8.3.6.2(verification of overload releases (sequence IV))	-	4000	only for internal testing
8.3.6.4(verification of temperature-rise (sequence IV))	-	25000	only for internal testing
8.3.6.5(short circuit breaking capacity at maximum short time withstand current (sequence IV))	-	0	short circuit test is not available (under exclusion)
8.3.6.6(verification of dielectric withstand (sequence IV))	-	28000	only for internal testing
8.3.6.7(verification of overload releases (sequence IV))	-	4000	only for internal testing
8.3.7.1(General)	-	10000	Test sequence V ( Pre & post tests are available Except short circuit )- Only for internal testing
8.3.7.3((stage 1) verification of temperature-rise (sequence V))	-	0	short circuit test is not available (under exclusion)
8.3.7.4((stage 1) verification of dielectric withstand (sequence V))	-	28000	only for internal testing
8.3.7.5((stage 2) verification of overload releases (sequence V))	-	4000	only for internal testing
8.3.7.8((stage 2) verification of dielectric withstand (sequence V))	-	28000	only for internal testing
8.3.7.9((stage 2) verification of overload releases (sequence V))	-	4000	only for internal testing
8.3.8.7(verification of temperature-rise (sequence VI))	-	25000	only for internal testing
8.3.8.8(verification of overload releases (sequence VI))	-	4000	only for internal testing
8.3.5.5(verification of overload releases (sequence III))	-	4000	only for internal testing
8.3.5.4(verification of dielectric withstand (sequnce III))	-	28000	only for internal testing
8.3.5.1(General)	-	10000	Test sequence V ( Pre & post tests are available Except short circuit )- Only for internal testing
8.3.5.2(verification of overload releases (sequence III))	-	4000	only for internal testing
8.3.4.5(verification of temperature-rise (sequence II))	-	25000	only for internal testing
8.3.4.6(verification of overload releases (sequence II))	-	4000	only for internal testing
8.3.8.4(Rated service short-circuit breaking capacity*)	-	0	short circuit test is not available (under exclusion)

05 Jun, 2028

-
Exclusion: 8.3.8.4 (rated service short circuit breaking capacity (sequence VI)), 8.3.4.3 (verification of operational performance capability (sequence II)), 8.3.4.1 (General), 8.3.8.4 (Rated service short-circuit breaking capacity*), 8.3.7.7 (Short-circuit at ultimate short-circuit breaking capacity), 8.3.8.3 (rated short time withstand current (sequence VI)), 8.3.7.6 ((stage 2) short circuit at 1.1 time the take-over current (sequence V)), 8.3.8.3 (rated short time withstand current (sequence VI)), 8.3.6.3 (rated short circuit withstand current (sequence IV)), 8.3.7.6 ((stage 2) short circuit at 1.1 time the take-over current (sequence V)), 8.3.6.3 (rated short circuit withstand current (sequence IV)), 8.3.5.3 (rated short circuit breaking capacity (sequence III)), 8.3.7.2 ((stage 1) short circuit at the selectivity limit current (sequence V)), 8.3.5.3 (Rated ultimate short-circuit breaking capacity), Annex N (Electromagnetic compatibility (EMC)), Annex O (Electromagnetic compatibility (EMC)), 7.3 Annexure J Table J.1 (Electrostatic discharges), 8.3.9 (Critical d.c. load current test), Cl.8.5 (Annex Q of IS/IEC 60947-1) (Special tests)

Bureau of Indian Standards

The National Standards Body of India

BCH Electric Limited, Faridabad

20/4, Mathura road, Faridabad, Faridabad, Haryana, 121006

9891014805 sushil.kumar@bchindia.com

Scope List