BIS - LIMS (Laboratory Information Management System)

Switchgear Testing Laboratories, Schneider Electric India Private Limited, Ahmednagar

A9, A10, ESE ESP MFG. PROCESS, MIDC AREA, NAGAPUR, Ahmednagar, Ahmednagar, Maharashtra, 414111, Nagapur, Ahmednagar, Maharashtra, 414111

9987033570 vikram.jadhav@lntebg.com

Scope List

Reset

3 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS/IEC 61439 : Part 3 (2012)

Low - Voltage switchgear and controlgear assemblies: Part 3 distribution boards intended to be operated by ordinary persons (Dbo)

520000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Symbols and abbreviations)	-	2000	-
5(Interface characteristics)	-	2000	-
6(Information)	-	2000	-
7(Service conditions)	-	2000	-
8(Constructional requirements)	-	2000	-
9(Performance requirements)	-	170000	-
10(Design verification)	-	170000	-
11(Routine verification)	-	170000	-

25 Mar, 2028

-
included w.e.f.03.07.2025

IS/IEC 60947 : Part 5 : Sec 1 (2016)

Low-Voltage Switchgear And Control Gear : Part 5-1 Control Circuit Devices And Switching Elements Electromechanical Control Circuit Devices

4012000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.1(Marking : General ")	-	2000	-
5.2.2(Terminal identification and marking)	-	2000	-
5.2.3(Functional markings)	-	2000	-
5.2.4(Emergency stop)	-	2000	-
5.2.5(Operating diagram)	-	2000	-
5.2.5.1(Position indication)	-	2000	-
5.2.5.2(Terminal markings for operating diagrams)	-	2000	-
5.2.6(Time delay markings)	-	2000	-
5.3(Instructions for installation, operation and maintenance)	-	2000	-
7.1.2.2(Glow-wire testing)	-	20000	-
7.1.3(Current-carrying parts and their connections)	-	5000	-
7.1.4(Clearances and creepage distances)	-	5000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
7.2.4.3(Durability)	-	140000	-
7.3.2.4(Electrostatic discharges)	-	20000	This test facility is not under NABL Scope
7.3.2.5(Radiated radio-frequency electromagnetic fields)	-	20000	This test facility is not under NABL Scope
7.3.2.6(Electrical fast transients/bursts)	-	20000	This test facility is not under NABL Scope
7.3.2.7(Surges)	-	20000	This test facility is not under NABL Scope
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	20000	This test facility is not under NABL Scope
7.3.2.9(Power-frequency magnetic fields)	-	20000	This test facility is not under NABL Scope
7.3.2.10(Voltage dips and interruptions)	-	20000	This test facility is not under NABL Scope
7.3.2.11(Harmonics in the supply)	-	20000	This test facility is not under NABL Scope
7.3.3(Emission)	-	20000	This test facility is not under NABL Scope
7.2.3(Dielectric properties)	-	25000	-
8.1.5(Special tests)	-	140000	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	20000	-
8.2.1.1.1(Glow-wire test)	-	20000	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	20000	-
8.2.3(Enclosures for equipment)	-	10000	-
8.2.4(Mechanical and electrical properties of terminals)	-	20000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	10000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	10000	-
8.2.4.4(Pull-out test)	-	20000	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	10000	-
8.2.5(Verification of actuating force (or moment))	-	10000	-
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	10000	-
8.2.7(Conduit pull-out test, torque test, and bending test with metallic conduits)	-	25000	-
8.3.3.3(Temperature rise)	-	15000	-
8.3.3.4(Dielectric properties)	-	25000	-
8.3.3.2(Operating limits of contactor relays)	-	15000	-
8.3.3.5(Making and breaking capacities)	-	30000	-
8.3.3.5.2(Test circuits and connections)	-	10000	-
8.3.4.3(Test circuit and test quantities)	-	10000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	45000	-
8.3.4.1(General conditions for short-circuit tests)	-	45000	-
8.3.4.4 b)(Condition of the switching element after the test)	-	10000	-
8.3.4.4 a)(Condition of the switching element after the test)	-	10000	-
8.4.2.4(Surges)	-	20000	This test facility is not under NABL Scope
8.3.1(Degree of protection of enclosed control circuit devices)	-	25000	-
C.3(Electrical durability)	-	140000	-
C.2(Mechanical durability)	-	90000	-
C.1.2(Observation)	-	10000	-
F 8.1.2.6("Dielectric test after stresses")	-	25000	-
F 8.1.2.4(Impact test)	-	25000	-
F.8.1.2.3("Rapid change of temperature test")	-	50000	-
F.8.1.2.5(Damp heat, cyclic)	-	50000	-
F.8.1.2.4(Impact test)	-	25000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	25000	-
G.8.2.5(Bend test)	-	10000	-
G.8.2.4(Push test)	-	10000	-
G.8.2.3(Torque test)	-	10000	-
G.8.2.2(Pull-out test)	-	10000	-
H.8.7("Verification of electromagnetic compatibility")	-	20000	This test facility is not under NABL Scope
H.8.6("Performance under short circuit current conditions")	-	45000	-
H.8.5("Making and breaking capacities")	-	30000	-
H.8.4(OFF-state current)	-	10000	-
H.8.2(Voltage drop test)	-	10000	-
J.8.5("Degree of protection for indicating towers")	-	25000	-
J.8.4.3(Indirect support mounting)	-	10000	-
J.8.4.2.3(Vibration)	-	25000	-
J.8.4.2.2(Shock)	-	25000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	45000	-
J.8.3.3.3(Temp-rise tests)	-	15000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	25000	-
J.8.3.3.4(Dielectric test)	-	25000	-
J.7.1.12(Indicator lights with built-in transformers)	-	2000	-
J.7("Constructional requirements")	-	10000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	45000	-
K 8.3.7(Verification of robustness of the actuating system)	-	10000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	15000	-
K.8.3.6(Verification of direct opening action)	-	10000	-
L.8.4(Special test for mechanically linked contact elements)	-	10000	-
N.3(Method based on durability test results)	-	30000	-
L.8.4(Special test for mechanically linked contact elements)	-	10000	-
K.8.3.6(Verification of direct opening action)	-	10000	-
5.2.1(" Marking : General ")	-	2000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	15000	-
K 8.3.7(Verification of robustness of the actuating system)	-	10000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	45000	-
5.2.2(Terminal identification and marking)	-	2000	-
J.7("Constructional requirements")	-	10000	-
5.2.3(Functional markings)	-	2000	-
J.7.1.12(Indicator lights with built-in transformers)	-	10000	-
J.8.3.3.4(Dielectric test)	-	25000	-
5.2.4(Emergency stop)	-	2000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	25000	-
J.8.3.3.3(Temp-rise tests)	-	15000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	45000	-
5.2.5(Operating diagram)	-	2000	-
J.8.4.2.2(Shock)	-	2000	-
5.2.5.1(Position indication)	-	2000	-
J.8.4.2.3(Vibration)	-	25000	-
J.8.4.3(Indirect support mounting)	-	10000	-
5.2.5.2(Terminal markings for operating diagrams)	-	2000	-
J.8.5("Degree of protection for indicating towers")	-	25000	-
5.2.6(Time delay markings)	-	2000	-
H.8.2(Voltage drop test)	-	10000	-
5.3(Instructions for installation, operation and maintenance)	-	2000	-
H.8.4(OFF-state current)	-	2000	-
H.8.5("Making and breaking capacities")	-	30000	-
7.1.2.2(Glow-wire testing)	-	20000	-
H.8.6("Performance under short circuit current conditions")	-	45000	-
7.1.3(Current-carrying parts and their connections)	-	5000	-
Cl-7.3(Electromagnetic compatibility (EMC))	-	20000	This test facility is not under NABL Scope
G.8.2.2(Pull-out test)	-	10000	-
7.1.4 of IEC 60947-1:2007 (Sequence 6)(Measurement of Clearances and creepage distances)	-	5000	-
G.8.2.3(Torque test)	-	10000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
G.8.2.4(Push test)	-	10000	-
G.8.2.5(Bend test)	-	10000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	25000	-
7.2.4.3(Durability)	-	140000	-
F.8.1.2.4(Impact test)	-	25000	-
7.3.2.4(Electrostatic discharges)	-	20000	This test facility is not under NABL Scope
F.8.1.2.5(Damp heat, cyclic)	-	50000	-
F.8.1.2.3("Rapid change of temperature test")	-	50000	-
7.3.2.6(Electrical fast transients/bursts)	-	20000	This test facility is not under NABL Scope
F 8.1.2.4(Impact test)	-	25000	-
F 8.1.2.6("Dielectric test after stresses")	-	25000	-
C.1.2(Observation)	-	10000	-
7.3.2.7(Surges)	-	20000	This test facility is not under NABL Scope
C.2(Mechanical durability)	-	90000	-
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	20000	-
C.3(Electrical durability)	-	140000	-
7.3.2.9(Power-frequency magnetic fields)	-	20000	This test facility is not under NABL Scope
Annex C of IEC 60947-1:2007 (Sequence 5)(Degree of protection of enclosed control circuit devices)	-	5000	-
8.4.2.4(Surges)	-	20000	This test facility is not under NABL Scope
7.3.2.10(Voltage dips and interruptions)	-	20000	This test facility is not under NABL Scope
8.3.4.4 a)(Condition of the switching element after the test)	-	10000	-
8.3.4.4 b)(Condition of the switching element after the test)	-	10000	-
7.3.2.11(Harmonics in the supply)	-	20000	This test facility is not under NABL Scope
8.3.4.1(General conditions for short-circuit tests)	-	45000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	45000	-
8.3.4.3(Test circuit and test quantities)	-	45000	-
7.3.3(Emission)	-	20000	This test facility is not under NABL Scope
8.3.3.5.2(Test circuits and connections)	-	10000	-
8.3.3.5(Making and breaking capacities)	-	30000	-
8.3.3.2(Operating limits of contactor relays)	-	15000	-
7.2.3(Dielectric properties)	-	25000	-
8.3.3.4(Dielectric properties)	-	25000	-
8.3.3.3(Temperature rise)	-	15000	-
8.1.5(Special tests)	-	140000	-
8.2.7(Conduit pull-out test, torque test and bending test with metallic conduits)	-	25000	-
8.2.6 (Sequence 6)(Verification of limitation of rotation (of a rotary switch))	-	10000	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	50000	-
8.2.5 (Sequence 5)(Verification of actuating force (or moment))	-	10000	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	10000	-
8.2.1.1.1(Glow-wire test)	-	20000	-
8.2.4.4(Pull-out test)	-	20000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	10000	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	20000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	10000	-
8.2.4(Mechanical and electrical properties of terminals)	-	20000	-
8.2.3(Enclosures for equipment)	-	10000	-
8.3.3.5.6 b(Dielectric verification)	-	25000	-
8.3.4(Performance under Conditional Short-Circuit Current)	-	45000	-
8.3.3.5.3(Making and breaking capacities of switching elements under abnormal conditions)	-	30000	-
8.3.3.5.4(Making and breaking capacities of switching elements under abnormal conditions)	-	30000	-
5.2.1(Marking : General ")	-	2000	-
5.2.2(Terminal identification and marking)	-	2000	-
5.2.3(Functional markings)	-	2000	-
5.2.4(Emergency stop)	-	2000	-
5.2.5(Operating diagram)	-	2000	-
5.2.5.1(Position indication)	-	2000	-
5.2.5.2(Terminal markings for operating diagrams)	-	2000	-
5.2.6(Time delay markings)	-	2000	-
5.3(Instructions for installation, operation and maintenance)	-	2000	-
7.1.2.2(Glow-wire testing)	-	20000	-
7.1.3(Current-carrying parts and their connections)	-	5000	-
7.1.4(Clearances and creepage distances)	-	5000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
7.2.4.3(Durability)	-	140000	-
7.3.2.4(Electrostatic discharges)	-	20000	This test facility is not under NABL Scope
7.3.2.5(Radiated radio-frequency electromagnetic fields)	-	20000	This test facility is not under NABL Scope
7.3.2.6(Electrical fast transients/bursts)	-	20000	This test facility is not under NABL Scope
7.3.2.7(Surges)	-	20000	-
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	20000	This test facility is not under NABL Scope
7.3.2.9(Power-frequency magnetic fields)	-	20000	This test facility is not under NABL Scope
7.3.2.10(Voltage dips and interruptions)	-	20000	This test facility is not under NABL Scope
7.3.2.11(Harmonics in the supply)	-	20000	This test facility is not under NABL Scope
7.3.3(Emission)	-	20000	This test facility is not under NABL Scope
7.2.3(Dielectric properties)	-	25000	-
8.1.5(Special tests)	-	140000	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	20000	-
8.2.1.1.1(Glow-wire test)	-	20000	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	20000	-
8.2.3(Enclosures for equipment)	-	10000	-
8.2.4(Mechanical and electrical properties of terminals)	-	20000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	10000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	10000	-
8.2.4.4(Pull-out test)	-	20000	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	10000	-
8.2.5(Verification of actuating force (or moment))	-	10000	-
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	10000	-
8.2.7(Conduit pull-out test, torque test, and bending test with metallic conduits)	-	25000	-
8.3.3.3(Temperature rise)	-	15000	-
8.3.3.4(Dielectric properties)	-	25000	-
8.3.3.2(Operating limits of contactor relays)	-	15000	-
8.3.3.5(Making and breaking capacities)	-	30000	-
8.3.3.5.2(Test circuits and connections)	-	10000	-
8.3.4.3(Test circuit and test quantities)	-	10000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	45000	-
8.3.4.1(General conditions for short-circuit tests)	-	45000	-
8.3.4.4 b)(Condition of the switching element after the test)	-	10000	-
8.3.4.4 a)(Condition of the switching element after the test)	-	10000	-
8.4.2.4(Surges)	-	20000	This test facility is not under NABL Scope
8.3.1(Degree of protection of enclosed control circuit devices)	-	25000	-
C.3(Electrical durability)	-	140000	-
C.2(Mechanical durability)	-	90000	-
C.1.2(Observation)	-	10000	-
F 8.1.2.6("Dielectric test after stresses")	-	25000	-
F 8.1.2.4(Impact test)	-	25000	-
F.8.1.2.3("Rapid change of temperature test")	-	50000	-
F.8.1.2.5(Damp heat, cyclic)	-	50000	-
F.8.1.2.4(Impact test)	-	25000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	25000	-
G.8.2.5(Bend test)	-	10000	-
G.8.2.4(Push test)	-	10000	-
G.8.2.3(Torque test)	-	10000	-
G.8.2.2(Pull-out test)	-	10000	-
H.8.7("Verification of electromagnetic compatibility")	-	20000	This test facility is not under NABL Scope
H.8.6("Performance under short circuit current conditions")	-	45000	-
H.8.5("Making and breaking capacities")	-	30000	-
H.8.4(OFF-state current)	-	10000	-
H.8.2(Voltage drop test)	-	10000	-
J.8.5("Degree of protection for indicating towers")	-	25000	-
J.8.4.3(Indirect support mounting)	-	10000	-
J.8.4.2.3(Vibration)	-	25000	-
J.8.4.2.2(Shock)	-	25000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	45000	-
J.8.3.3.3(Temp-rise tests)	-	15000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	25000	-
J.8.3.3.4(Dielectric test)	-	25000	-
J.7.1.12(Indicator lights with built-in transformers)	-	2000	-
J.7("Constructional requirements")	-	10000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	45000	-
K 8.3.7(Verification of robustness of the actuating system)	-	10000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	15000	-
K.8.3.6(Verification of direct opening action)	-	10000	-
L.8.4(Special test for mechanically linked contact elements)	-	10000	-
N.3(Method based on durability test results)	-	30000	-
L.8.4(Special test for mechanically linked contact elements)	-	10000	-
K.8.3.6(Verification of direct opening action)	-	10000	-
5.2.1(" Marking : General ")	-	2000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	15000	-
K 8.3.7(Verification of robustness of the actuating system)	-	10000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	45000	-
5.2.2(Terminal identification and marking)	-	2000	-
J.7("Constructional requirements")	-	10000	-
5.2.3(Functional markings)	-	2000	-
J.7.1.12(Indicator lights with built-in transformers)	-	10000	-
J.8.3.3.4(Dielectric test)	-	25000	-
5.2.4(Emergency stop)	-	2000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	25000	-
J.8.3.3.3(Temp-rise tests)	-	15000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	45000	-
5.2.5(Operating diagram)	-	2000	-
J.8.4.2.2(Shock)	-	2000	-
5.2.5.1(Position indication)	-	2000	-
J.8.4.2.3(Vibration)	-	25000	-
J.8.4.3(Indirect support mounting)	-	10000	-
5.2.5.2(Terminal markings for operating diagrams)	-	2000	-
J.8.5("Degree of protection for indicating towers")	-	25000	-
5.2.6(Time delay markings)	-	2000	-
H.8.2(Voltage drop test)	-	10000	-
5.3(Instructions for installation, operation and maintenance)	-	2000	-
H.8.4(OFF-state current)	-	2000	-
H.8.5("Making and breaking capacities")	-	30000	-
7.1.2.2(Glow-wire testing)	-	20000	-
H.8.6("Performance under short circuit current conditions")	-	45000	-
7.1.3(Current-carrying parts and their connections)	-	5000	-
Cl-7.3(Electromagnetic compatibility (EMC))	-	20000	This test facility is not under NABL Scope
G.8.2.2(Pull-out test)	-	10000	-
7.1.4 of IEC 60947-1:2007 (Sequence 6)(Measurement of Clearances and creepage distances)	-	5000	-
G.8.2.3(Torque test)	-	10000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
G.8.2.4(Push test)	-	10000	-
G.8.2.5(Bend test)	-	10000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	25000	-
7.2.4.3(Durability)	-	140000	-
F.8.1.2.4(Impact test)	-	25000	-
7.3.2.4(Electrostatic discharges)	-	20000	This test facility is not under NABL Scope
F.8.1.2.5(Damp heat, cyclic)	-	50000	-
F.8.1.2.3("Rapid change of temperature test")	-	50000	-
7.3.2.6(Electrical fast transients/bursts)	-	20000	This test facility is not under NABL Scope
F 8.1.2.4(Impact test)	-	25000	-
F 8.1.2.6("Dielectric test after stresses")	-	25000	-
C.1.2(Observation)	-	10000	-
7.3.2.7(Surges)	-	20000	This test facility is not under NABL Scope
C.2(Mechanical durability)	-	90000	-
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	20000	-
C.3(Electrical durability)	-	140000	-
7.3.2.9(Power-frequency magnetic fields)	-	20000	This test facility is not under NABL Scope
Annex C of IEC 60947-1:2007 (Sequence 5)(Degree of protection of enclosed control circuit devices)	-	5000	-
8.4.2.4(Surges)	-	20000	This test facility is not under NABL Scope
7.3.2.10(Voltage dips and interruptions)	-	20000	This test facility is not under NABL Scope
8.3.4.4 a)(Condition of the switching element after the test)	-	10000	-
8.3.4.4 b)(Condition of the switching element after the test)	-	10000	-
7.3.2.11(Harmonics in the supply)	-	20000	This test facility is not under NABL Scope
8.3.4.1(General conditions for short-circuit tests)	-	45000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	45000	-
8.3.4.3(Test circuit and test quantities)	-	45000	-
7.3.3(Emission)	-	20000	This test facility is not under NABL Scope
8.3.3.5.2(Test circuits and connections)	-	10000	-
8.3.3.5(Making and breaking capacities)	-	30000	-
8.3.3.2(Operating limits of contactor relays)	-	15000	-
7.2.3(Dielectric properties)	-	25000	-
8.3.3.4(Dielectric properties)	-	25000	-
8.3.3.3(Temperature rise)	-	15000	-
8.1.5(Special tests)	-	140000	-
8.2.7(Conduit pull-out test, torque test and bending test with metallic conduits)	-	25000	-
8.2.6 (Sequence 6)(Verification of limitation of rotation (of a rotary switch))	-	10000	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	50000	-
8.2.5 (Sequence 5)(Verification of actuating force (or moment))	-	10000	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	10000	-
8.2.1.1.1(Glow-wire test)	-	20000	-
8.2.4.4(Pull-out test)	-	20000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	10000	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	20000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	10000	-
8.2.4(Mechanical and electrical properties of terminals)	-	20000	-
8.2.3(Enclosures for equipment)	-	10000	-
8.3.3.5.6 b(Dielectric verification)	-	25000	-
8.3.4(Performance under Conditional Short-Circuit Current)	-	45000	-
8.3.3.5.3(Making and breaking capacities of switching elements under abnormal conditions)	-	30000	-
8.3.3.5.4(Making and breaking capacities of switching elements under abnormal conditions)	-	30000	-
5.2.1(Marking : General ")	-	2000	-
5.2.2(Terminal identification and marking)	-	2000	-
5.2.3(Functional markings)	-	2000	-
5.2.4(Emergency stop)	-	2000	-
5.2.5(Operating diagram)	-	2000	-
5.2.5.1(Position indication)	-	2000	-
5.2.5.2(Terminal markings for operating diagrams)	-	2000	-
5.2.6(Time delay markings)	-	2000	-
5.3(Instructions for installation, operation and maintenance)	-	2000	-
7.1.2.2(Glow-wire testing)	-	20000	-
7.1.3(Current-carrying parts and their connections)	-	5000	-
7.1.4(Clearances and creepage distances)	-	5000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
7.2.4.3(Durability)	-	140000	-
7.2.3(Dielectric properties)	-	20000	-
8.1.5(Special tests)	-	20000	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	20000	-
8.2.1.1.1(Glow-wire test)	-	20000	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	20000	-
8.2.3(Enclosures for equipment)	-	10000	-
8.2.4(Mechanical and electrical properties of terminals)	-	20000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	10000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	10000	-
8.2.4.4(Pull-out test)	-	20000	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	10000	-
8.2.5(Verification of actuating force (or moment))	-	10000	-
8.2.6(Verification of limitation of rotation (of a rotary switch))	-	10000	-
8.2.7(Conduit pull-out test, torque test, and bending test with metallic conduits)	-	25000	-
8.3.3.3(Temperature rise)	-	15000	-
8.3.3.4(Dielectric properties)	-	25000	-
8.3.3.2(Operating limits of contactor relays)	-	15000	-
8.3.3.5(Making and breaking capacities)	-	30000	-
8.3.3.5.2(Test circuits and connections)	-	10000	-
8.3.4.3(Test circuit and test quantities)	-	10000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	45000	-
8.3.4.1(General conditions for short-circuit tests)	-	45000	-
8.3.4.4 b)(Condition of the switching element after the test)	-	10000	-
8.3.4.4 a)(Condition of the switching element after the test)	-	10000	-
8.3.1(Degree of protection of enclosed control circuit devices)	-	25000	-
C.3(Electrical durability)	-	140000	-
C.2(Mechanical durability)	-	90000	-
C.1.2(Observation)	-	10000	-
F 8.1.2.6("Dielectric test after stresses")	-	25000	-
F 8.1.2.4(Impact test)	-	25000	-
F.8.1.2.3("Rapid change of temperature test")	-	50000	-
F.8.1.2.5(Damp heat, cyclic)	-	50000	-
F.8.1.2.4(Impact test)	-	25000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	25000	-
G.8.2.5(Bend test)	-	10000	-
G.8.2.4(Push test)	-	10000	-
G.8.2.3(Torque test)	-	10000	-
G.8.2.2(Pull-out test)	-	10000	-
H.8.6("Performance under short circuit current conditions")	-	45000	-
H.8.5("Making and breaking capacities")	-	30000	-
H.8.4(OFF-state current)	-	10000	-
H.8.2(Voltage drop test)	-	10000	-
J.8.5("Degree of protection for indicating towers")	-	25000	-
J.8.4.3(Indirect support mounting)	-	10000	-
J.8.4.2.3(Vibration)	-	25000	-
J.8.4.2.2(Shock)	-	25000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	45000	-
J.8.3.3.3(Temp-rise tests)	-	15000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	25000	-
J.8.3.3.4(Dielectric test)	-	25000	-
J.7.1.12(Indicator lights with built-in transformers)	-	2000	-
J.7("Constructional requirements")	-	10000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	45000	-
K 8.3.7(Verification of robustness of the actuating system)	-	10000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	15000	-
K.8.3.6(Verification of direct opening action)	-	10000	-
L.8.4(Special test for mechanically linked contact elements)	-	10000	-
N.3(Method based on durability test results)	-	30000	-
L.8.4(Special test for mechanically linked contact elements)	-	10000	-
K.8.3.6(Verification of direct opening action)	-	10000	-
5.2.1(" Marking : General ")	-	2000	-
K 8.3.5(Verification of mechanical operation of position switches at limits of temperature)	-	15000	-
K 8.3.7(Verification of robustness of the actuating system)	-	10000	-
K 8.3.4("Performance under conditional shortcircuit current")	-	45000	-
5.2.2(Terminal identification and marking)	-	2000	-
J.7("Constructional requirements")	-	10000	-
5.2.3(Functional markings)	-	2000	-
J.7.1.12(Indicator lights with built-in transformers)	-	10000	-
J.8.3.3.4(Dielectric test)	-	25000	-
5.2.4(Emergency stop)	-	2000	-
J.8.3.3.4.3("Dielectric test (indicator lights with built-in transformers)")	-	25000	-
J.8.3.3.3(Temp-rise tests)	-	15000	-
J.8.3.4("Short Circuit test (on built-in transformers, if any)")	-	45000	-
5.2.5(Operating diagram)	-	2000	-
J.8.4.2.2(Shock)	-	2000	-
5.2.5.1(Position indication)	-	2000	-
J.8.4.2.3(Vibration)	-	25000	-
J.8.4.3(Indirect support mounting)	-	10000	-
5.2.5.2(Terminal markings for operating diagrams)	-	2000	-
J.8.5("Degree of protection for indicating towers")	-	25000	-
5.2.6(Time delay markings)	-	2000	-
H.8.2(Voltage drop test)	-	10000	-
5.3(Instructions for installation, operation and maintenance)	-	2000	-
H.8.4(OFF-state current)	-	2000	-
H.8.5("Making and breaking capacities")	-	30000	-
7.1.2.2(Glow-wire testing)	-	20000	-
H.8.6("Performance under short circuit current conditions")	-	45000	-
7.1.3(Current-carrying parts and their connections)	-	5000	-
G.8.2.2(Pull-out test)	-	10000	-
7.1.4 of IEC 60947-1:2007 (Sequence 6)(Measurement of Clearances and creepage distances)	-	5000	-
G.8.2.3(Torque test)	-	10000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
7.2.4.1(Making and breaking capacities)	-	30000	-
G.8.2.4(Push test)	-	10000	-
G.8.2.5(Bend test)	-	10000	-
F.8.1.2.1(Dielectric tests in new conditions)	-	25000	-
7.2.4.3(Durability)	-	140000	-
F.8.1.2.4(Impact test)	-	25000	-
F.8.1.2.5(Damp heat, cyclic)	-	50000	-
F.8.1.2.3("Rapid change of temperature test")	-	50000	-
F 8.1.2.4(Impact test)	-	25000	-
F 8.1.2.6("Dielectric test after stresses")	-	25000	-
C.1.2(Observation)	-	10000	-
C.2(Mechanical durability)	-	90000	-
7.3.2.8(Conducted disturbances induced by radio-frequency fields)	-	20000	-
C.3(Electrical durability)	-	140000	-
Annex C of IEC 60947-1:2007 (Sequence 5)(Degree of protection of enclosed control circuit devices)	-	5000	-
8.3.4.4 a)(Condition of the switching element after the test)	-	10000	-
8.3.4.4 b)(Condition of the switching element after the test)	-	10000	-
8.3.4.1(General conditions for short-circuit tests)	-	45000	-
8.3.4.2(Performance under conditional short-circuit current : Test procedure)	-	45000	-
8.3.4.3(Test circuit and test quantities)	-	45000	-
8.3.3.5.2(Test circuits and connections)	-	10000	-
8.3.3.5(Making and breaking capacities)	-	30000	-
8.3.3.2(Operating limits of contactor relays)	-	15000	-
7.2.3(Dielectric properties)	-	25000	-
8.3.3.4(Dielectric properties)	-	25000	-
8.3.3.3(Temperature rise)	-	15000	-
8.1.5(Special tests)	-	140000	-
8.2.7(Conduit pull-out test, torque test and bending test with metallic conduits)	-	25000	-
8.2.6 (Sequence 6)(Verification of limitation of rotation (of a rotary switch))	-	10000	-
8.2.1.1(Test of resistance to abnormal heat and fire)	-	50000	-
8.2.5 (Sequence 5)(Verification of actuating force (or moment))	-	10000	-
8.2.4.5(Test for insertability of unprepared round copper conductors having the maximum cross-section)	-	10000	-
8.2.1.1.1(Glow-wire test)	-	20000	-
8.2.4.4(Pull-out test)	-	20000	-
8.2.4.3(Testing for damage to and accidental loosening of conductors (flexion test))	-	10000	-
8.2.1.1.2(Flammability, hot wire ignition and arc ignition tests (on materials))	-	20000	-
8.2.4.2(Tests of mechanical strength of terminals)	-	10000	-
8.2.4(Mechanical and electrical properties of terminals)	-	20000	-
8.2.3(Enclosures for equipment)	-	10000	-
8.3.3.5.6 b(Dielectric verification)	-	25000	-
8.3.4(Performance under Conditional Short-Circuit Current)	-	45000	-
8.3.3.5.3(Making and breaking capacities of switching elements under abnormal conditions)	-	30000	-
8.3.3.5.4(Making and breaking capacities of switching elements under abnormal conditions)	-	30000	-

25 Mar, 2028

-
iNCLUDED W.E.F.21.08.2025 EXCLUSION 7.3.2.4 (Electrostatic discharges) 7.3.2.5 (Radiated radio-frequency electromagnetic fields) 7.3.2.6 (Electrical fast transients/bursts) 7.3.2.7 (Surges) 7.3.2.8 (Conducted disturbances induced by radio-frequency fields) 7.3.2.9 (Power-frequency magnetic fields) 7.3.2.10 (Voltage dips and interruptions) 7.3.2.11 (Harmonics in the supply) 7.3.3 (Emission) 8.4.2.4 (Surges) H.8.7 ("Verification of electromagnetic compatibility") Cl-7.3 (Electromagnetic compatibility (EMC)) 8.4.2.4 (Surges) Cl-7.3.2 (Immunity)

IS/IEC 60947 : Part 4 : Sec 1 (2018)

Low-Voltage switchgear and controlgear : Part 4-1 Contactors and motor starters electromechanical contactors and motor-Starters

2055000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.2(Materials)	-	0	NO TEST
8.1.2.1(General materials requirements)	-	5000	-
8.1.2.2(Glow wire testing)	-	20000	-
8.1.2.3(Test based on flammability category)	-	20000	-
8.1.3(Current-carrying parts and their connections)	-	10000	-
8.1.4(Clearances and creepage distances)	-	5000	-
8.1.5.1(Insulation)	-	2000	NO TEST
8.1.5.2(Direction of movement)	-	2000	NO TEST
8.1.5.3(Mounting)	-	2000	NO TEST
8.1.5.4(Protection)	-	2000	NO TEST
8.1.8(Terminals)	-	2000	NO TEST
8.1.8.1(General)	-	2000	NO TEST
8.1.8.2(Terminal identification and marking)	-	1000	NO TEST
8.1.9(Additional requirements for equipment provided with a neutral pole)	-	1000	-
8.1.10(Provisions for protective earthing)	-	1000	-
8.1.11(Enclosures for equipment)	-	1000	-
8.1.11.1(Design)	-	1000	NO TEST
8.1.11.2(Insulation)	-	1000	NO TEST
8.1.12(Degrees of protection of enclosed equipment)	-	30000	-
8.1.13(Conduit pull-out, torque and bending with metallic conduits)	-	25000	-
8.1.14(Limited energy source)	-	1000	-
8.1.14.1(General)	-	1000	-
8.1.14.2(Limited energy source with galvanic separation)	-	1000	-
8.1.14.3(Limited energy source with current limiting impedance)	-	1000	-
8.1.15(Stored charge energy circuit)	-	1000	-
8.1.16(Fault and abnormal conditions)	-	1000	-
8.1.17(Short-circuit and overload protection of ports)	-	45000	-
8.2(Performance requirements)	-	20000	-
8.2.1(Operating conditions)	-	45000	-
8.2.1.1.1(General conditions)	-	5000	-
8.2.1.2(Limits of operation of contactors and power-operated starters)	-	5000	-
8.2.1.3(Limits of operation of under-voltage relays and releases)	-	5000	-
8.2.1.4(Limits of operation of shunt-coil operated releases (shunt trip))	-	5000	-
8.2.1.5(Limits of operation of current sensing relays and releases)	-	5000	-
8.2.1.5.1(Limits of operation of time-delay overload relays when all poles are energized)	-	5000	-
8.2.1.5.1.1(General tripping requirements of overload relays)	-	15000	-
8.2.1.5.1.2(Thermal memory test verification)	-	15000	-
8.2.1.5.2(Limits of operation of three-pole time-delay overload relays energized on two poles)	-	5000	-
8.2.1.5.3(Limits of operation of instantaneous magnetic overload relays)	-	5000	-
8.2.1.5.4(Limits of operation of under-current relays and releases for automatic change over)	-	5000	-
8.2.1.5.4.1(Limits of operation of under-current relays)	-	5000	-
8.2.1.5.4.2(Limits of operation of automatic change over by under-current relays)	-	5000	-
8.2.2(Temperature-rise)	-	15000	-
8.2.2.3(Accessible parts)	-	15000	-
8.2.2.4(Ambient air temperature)	-	15000	-
8.2.2.5(Main circuit)	-	15000	-
8.2.2.6(Control circuits)	-	15000	-
8.2.2.7.1(Uninterrupted and eight-hour duty windings)	-	15000	-
8.2.3(Dielectric properties)	-	25000	-
8.2.3.2(Voltage limiting components between circuits)	-	25000	-
8.2.4.3.1(Mechanical durability)	-	90000	-
8.2.4.3.2(Electrical durability)	-	140000	-
8.2.4.4(Overload current withstand capability of contactors)	-	25000	-
8.2.4.5(Coil power consumption)	-	15000	-
8.2.4.6(Pole impedance)	-	10000	-
8.2.4.7(Ability of a MPSD to make and break under short-circuit conditions)	-	45000	-
8.2.5.1(Performance under short-circuit conditions)	-	45000	-
8.2.5.3(Co-ordination test between AC-3e rated starter and associated SCPD)	-	45000	-
8.2.5.4(Co-ordination between a MPSD and another short-circuit protective device)	-	45000	-
9.1.5.2(Environment tests)	-	100000	-
9.2.2(Electrical performance of screwless-type clamping units)	-	140000	-
9.2.3(Ageing test for screwless-type clamping unit)	-	10000	-
9.2.4(Limited energy source test)	-	5000	-
9.2.5(Breakdown of components)	-	5000	-
9.2.5.2(Breakdown of components test)	-	5000	-
9.3.3.2(Operating limits)	-	5000	-
9.3.3.2.1.2(Coil power consumption)	-	10000	-
9.3.3.2.1.3(Pole impedance)	-	10000	-
9.3.3.2.2(Relays and releases)	-	5000	-
9.3.3.3.1(Ambient air temperature)	-	15000	-
9.3.3.3.2(Measurement of the temperature of parts)	-	15000	-
9.3.3.3.3(Temperature-rise of a part)	-	15000	-
9.3.3.3.4(Temperature-rise of the main circuit)	-	15000	-
9.3.3.3.5(Temperature-rise of control circuits)	-	15000	-
9.3.3.3.6(Temperature-rise of coils and electromagnets)	-	15000	-
9.3.3.3.7(Temperature-rise of auxiliary circuits)	-	15000	-
9.3.3.3.8(Temperature-rise of starting resistors for rheostatic rotor starters)	-	15000	-
9.3.3.6(Operational performance capability)	-	70000	-
9.3.4.2.2(prospective current)	-	1000	-
9.3.4.2.3(Test at the rated conditional short-circuit current Iq)	-	45000	-
9.3.5(Overload current withstand capability of contactors)	-	25000	-
9.3.6.2(Operation and operating limits)	-	20000	-
9.3.6.3(Dielectric tests)	-	25000	-
9.3.6.4(Mechanical operation tests of a MPSD)	-	90000	-
F.7.2(Tests on products in a new condition)	-	20000	-
F.7.3(Test after conventional operational performance)	-	20000	-
H.3(Limits of operation of control functions)	-	5000	-
H.4(Test of the control functions)	-	15000	-
M.9.4(Thermal cycling test)	-	25000	-
M.9.5(Climatic test)	-	50000	-
M.9.7(Critical load current test)	-	45000	-
8.2.4 of IEC 60947-1:2007 (Sequence 5)(Verification of Mechanical properties of terminals)	-	30000	-
Annex C of IEC 60947-1:2007 (Sequence 5)(Verification of Degree of protection of enclosed contactors and starters)	-	30000	-
M.9.11(Clearance and creepage distances)	-	5000	-
N.3.2(Touch current measurement)	-	5000	-
P.2.3(Verification of operational performance capability)	-	40000	-
P.2.4.2(Test voltage)	-	25000	-
P.2.4.3(Application of the test voltage)	-	25000	-
P.4(Test of MPSD for IT system)	-	45000	-
Q.5.3(Selectivity determined by test)	-	45000	-

25 Mar, 2028

-
Exclusions: 8.3 (Electromagnetic compatibility (EMC)), 8.3.2 (Immunity), 8.3.3 (Emission), 9.4.2 (Immunity), 9.4.2.2 (Electrostatic discharge), 9.4.2.3 (Radiated radio-frequency electromagnetic field), 9.4.2.4 (Conducted disturbances induced by radio-frequency fields), 9.4.2.5 (Electrical fast transient/bursts), 9.4.2.6 (Surges), 9.4.2.7 (Power frequency magnetic field), 9.4.2.8 (Voltage dips and short-time interruptions), 9.4.2.9 (Harmonics in the supply), 9.4.3 (Emission), M.8.3 (Electromagnetic compatibility (EMC))

Bureau of Indian Standards

The National Standards Body of India

Switchgear Testing Laboratories, Schneider Electric India Private Limited, Ahmednagar

A9, A10, ESE ESP MFG. PROCESS, MIDC AREA, NAGAPUR, Ahmednagar, Ahmednagar, Maharashtra, 414111, Nagapur, Ahmednagar, Maharashtra, 414111

9987033570 vikram.jadhav@lntebg.com

Scope List