BIS - LIMS (Laboratory Information Management System)

MS TESTING LABORATORY LLP

A-4/3/19, SSGT Road Industrial Area, Ghaziabad- 201001, U.P., Ghaziabad, Ghaziabad, Uttar Pradesh, 201001

9911590577 mstestinglab@gmail.com

Scope List

Reset

8 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 2074 (2023)

Ready Mixed Paint Air Drying Red Oxide Zinc Chrome Priming -Specification (Fourth Revision)

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.1 (a)(Composition, Pigment, Cl 5.1.1)	-	500	-
Cl 5.1 (b)(Composition, Driers)	-	200	-
Cl 5.1 .1 (a)(Zinc chrome, (Type 2 of IS 51), Annex B)	-	500	-
Cl 5.1 .1 (b)(Synthetic red oxides of iron (conforming to Grade 2 or IS 44), (conforming to Grade 3 of IS 44), 6 of IS 6947 (Part 2))	-	500	-
Cl 5.1 .1 (c)(Suitable extenders)	-	500	-
Cl 5.1.2(Volatile vehicle)	-	500	-
Cl 5.2(Material)	-	200	-
Cl 5.3(Compatibility with Thinner, IS 1872)	-	200	-
Cl 5.4(Freedom from Objectionable Impurities)	-	200	-
Cl 5.5(Lead Restriction, IS 101(Part 8/Sec 5))	-	500	-
1 (i) (a) Table 1(Consistency, Annex C)	-	500	-
1 (i) (b) Table 1(Viscosity by ford cup No. 4, IS 101 (Part1/sec5))	-	500	-
1 (ii) Table 1(Mass, IS 101 (Part1/sec7))	-	500	-
1 (iii) (a) Table 1(Drying time, Surface Dry, IS 101 (Part3/sec1))	-	500	-
1 (iii) (b) Table 1(Drying time, Hard Dry, IS 101 (Part3/sec1))	-	500	-
1 (iv) (a) Table 1(Finish, IS 101 (Part3/sec4))	-	500	-
1 (iv) (b) Table 1(Gloss, IS 101 (Part4/sec4))	-	500	-
1 (v) Table 1(Fineness of grind, IS 101 (Part 3/Sec 5))	-	500	-
1 (vi) Table 1(Colour, IS 101 (Part 4/Sec 2))	-	500	-
1 (vii) (a) Table 1(Flexibility and adhesion: Bend test (with 6.25 mm dia mandrel and in type 1 apparatus), Clause 2 of IS 101 (Part 5/Sec 2))	-	500	-
1 (vii) (b) Table 1(Scratch hardness (load 1 000g), Clause 3 of IS 101 (Part 5/Sec 2))	-	500	-
1 (viii) Table 1(Flash point, IS 101 (Part l/Sec 6))	-	500	-
1 (ix) Table 1(Volume solids, IS 101 (Part 8/Sec 6))	-	800	-
1 (x) (a) Table 1(Resistance to humidity under condition of condensation: Resistance to humidity, Clause 2 of IS 101 (Part 6/Sec 1))	-	2000	-
1 (x) (b) Table 1(Resistance to humidity under condition of condensation: Resistance to sea water (applicable for marine paints only), Annex D)	-	1000	-
1 (x) (c) Table 1(Resistance to humidity under condition of condensation: Resistance to salt spray, Annex E)	-	2000	-
1 (xi) Table 1(Accelerated storage stability test, Annex F)	-	1000	-
1 (xii) Table 1(Keeping properties, IS 101 (Part 6/Sec 2))	-	2000	Keeping properties test report will be done after 12 months
Cl 5.1 (a)(Composition, Pigment, Cl 5.1.1)	-	500	-
Cl 5.1 (b)(Composition, Driers)	-	200	-
Cl 5.1 .1 (a)(Zinc chrome, (Type 2 of IS 51), Annex B)	-	500	-
Cl 5.1 .1 (b)(Synthetic red oxides of iron (conforming to Grade 2 or IS 44), (conforming to Grade 3 of IS 44), 6 of IS 6947 (Part 2))	-	500	-
Cl 5.1 .1 (c)(Suitable extenders)	-	500	-
Cl 5.1.2(Volatile vehicle)	-	500	-
Cl 5.2(Material)	-	200	-
Cl 5.3(Compatibility with Thinner, IS 1872)	-	200	-
Cl 5.4(Freedom from Objectionable Impurities)	-	200	-
Cl 5.5(Lead Restriction, IS 101(Part 8/Sec 5))	-	500	-
1 (i) (a) Table 1(Consistency, Annex C)	-	500	-
1 (i) (b) Table 1(Viscosity by ford cup No. 4, IS 101 (Part1/sec5))	-	500	-
1 (ii) Table 1(Mass, IS 101 (Part1/sec7))	-	500	-
1 (iii) (a) Table 1(Drying time, Surface Dry, IS 101 (Part3/sec1))	-	500	-
1 (iii) (b) Table 1(Drying time, Hard Dry, IS 101 (Part3/sec1))	-	500	-
1 (iv) (a) Table 1(Finish, IS 101 (Part3/sec4))	-	500	-
1 (iv) (b) Table 1(Gloss, IS 101 (Part4/sec4))	-	500	-
1 (v) Table 1(Fineness of grind, IS 101 (Part 3/Sec 5))	-	500	-
1 (vi) Table 1(Colour, IS 101 (Part 4/Sec 2))	-	500	-
1 (vii) (a) Table 1(Flexibility and adhesion: Bend test (with 6.25 mm dia mandrel and in type 1 apparatus), Clause 2 of IS 101 (Part 5/Sec 2))	-	500	-
1 (vii) (b) Table 1(Scratch hardness (load 1 000g), Clause 3 of IS 101 (Part 5/Sec 2))	-	500	-
1 (viii) Table 1(Flash point, IS 101 (Part l/Sec 6))	-	500	-
1 (ix) Table 1(Volume solids, IS 101 (Part 8/Sec 6))	-	800	-
1 (x) (a) Table 1(Resistance to humidity under condition of condensation: Resistance to humidity, Clause 2 of IS 101 (Part 6/Sec 1))	-	2000	-
1 (x) (b) Table 1(Resistance to humidity under condition of condensation: Resistance to sea water (applicable for marine paints only), Annex D)	-	1000	-
1 (x) (c) Table 1(Resistance to humidity under condition of condensation: Resistance to salt spray, Annex E)	-	2000	-
1 (xi) Table 1(Accelerated storage stability test, Annex F)	-	1000	-
1 (xii) Table 1, Cl.5.6(Keeping properties 1. Visual observation [Cl.3.1, table 1 of IS 101 (Part 6/Sec 2)])	-	2000	-
1 (xii) Table 1, Cl.5.6(Keeping properties 5. Loss of mass resulting from Storage [Cl.3.5 of IS 101 (Part 6/Sec 2)])	-	500	-
1 (xii) Table 1, Cl.5.6(Keeping properties 4. Observation of dried film [Cl.3.4, table 1 of IS 101 (Part 6/Sec 2)])	-	500	-
1 (xii) Table 1, Cl.5.6(Keeping properties 3. Degree of settling [Cl.3.3, table 2 of IS 101 (Part 6/Sec 2)])	-	500	-
1 (xii) Table 1, Cl.5.6(Keeping properties 2. Change in skinning [Cl.3.2, table 2 of IS 101 (Part 6/Sec 2)]v)	-	500	-
Clause 5.1 Note(IS 101 Part 8 Sec 2)	-	500	-
Clause 5.1 Note(Non Volatile Vehicle)	-	500	-
6.2(Marking)	-	200	-
Clause 5.1 Note(Non Volatile Vehicle)	-	500	-
Cl-4(The smell of the material shall not be objectionable during application)	-	200	-
Cl-5.1 (a)(Pigment)	-	500	-
Cl-5.1 (b)(Driers)	-	200	-
Cl-5.1.1 (a)("Zinc oxide content Chromic anhydride content")	-	500	-
Cl-5.1.1 (b)(Synthetic red oxides of iron or Natural red oxides of iron or A mixture of both which shall correspond to red oxide, percent by mass)	-	500	-
Cl-5.1.1 (c)(Suitable extenders)	-	500	-
Cl-5.1.2(volatile vehicle)	-	500	-
Cl-5.2(Material)	-	200	-
Cl-5.3(Compatibility with Thinner)	-	200	-
Cl-5.4(Freedom from Objectionable Impurities)	-	200	-
Cl-5.5(Lead Restriction)	-	500	-
Cl-5.6 & 8 Table-1 (i) (a)(Consistency)	-	500	-
Cl-5.6 & 8, Table-1 (i) (b)(Viscosity by ford cup No. 4 at 27±2°C)	-	500	-
Cl-5.6 & 8, Table-1 (ii)(Mass, in kg/10 1, Min)	-	500	-
Cl-5.6 & 8, Table-1 (iii)("Drying time, h, Max a) Surface dry b) Hard dry")	-	1000	-
Cl-5.6 & 8, Table-1 (iv)(a) Finish)	-	500	-
Cl-5.6 & 8, Table-1 (iv)(b) Gloss 60° , Max)	-	500	-
Cl-5.6 & 8, Table-1 (v)(Fineness of grind, microns, Max)	-	500	-
Cl-5.6 & 8, Table-1 (vi)(Colour)	-	500	-
Cl-5.6 & 8,, Table-1 (vii) a)(Flexibility and adhesion: Bend test with 6.25mm dia mandrel and in type 1 apparatus)	-	500	-
Cl-5.6 & 8, Table-1 (viii)(Flash point)	-	500	-
Cl-5.6 & 8,, Table-1 (ix)(Volume solids, percent)	-	800	-
Cl-5.6 & 8,, Table-1 (x) (a)(Resistance to humidity)	-	2000	-
Cl-5.6 & 8, Table-1 (x) (b)("Resistance to sea water (applicable for marine paints only)")	-	1000	-
Cl-5.6 & 8, Table-1 (x) (c)(Resistance to salt spray)	-	2000	-
Cl-5.6 & 8, Table-1 (xi)(Accelerated storage stability test)	-	1000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Visual observation (Corrosion and odour of putrefaction, rancidity or souring) ")	-	2000	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Change in skinning")	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Degree of settling ")	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Observation of dried film ")	-	500	-
Cl-5.6 & 8, Table-1 (xii)("Keeping properties Loss of mass resulting from Storage ")	-	500	-
Cl-5.7, Table-2 (i)(Consistency)	-	500	-
Cl-5.7, Table-2 (ii)(Hard dry, h, Max)	-	500	-
Cl-5.7, Table-2 (iii)(Non- volatile vehicle, percent, Min)	-	500	-
Cl-5.7, Table-2 (iv)(Wet opacity, m2 /10 l, Min)	-	500	-
Cl-5.6 & 8,, Table-1 (vii) b)(Flexibility and adhesion: Scratch hardness)	-	0	-

28 Aug, 2028

-
-

IS 13607 (1992)

Heady mixed paint, finishing, general purposes, synthetic - Specification

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-4.1 (General)	-	500	-
Clause-4.2(Composition)	-	1000	-
Clause-4.3 Table-1 S.No-1 (i), a)(Consistency)	-	500	-
Clause-4.3 Table-1 S.No-1 (ii)(Drying time, Max)	-	1000	-
Clause-4.3 Table-1 S.No-1 (iii), a)(Finish)	-	500	-
Clause-4.3 Table-1 S.No-1 (iii), b)(Fineness of grind, Max)	-	500	-
Clause-4.3 Table-1 S.No-1 (iv)(Mass in kg/10 1, Min)	-	500	-
Clause-4.3 Table-1 S.No-1 (v)(Gloss ( Specular Reflection ))	-	500	-
Clause-4.3 Table-1 S.No-1 (vi)(Colour)	-	500	-
Clause-4.3 Table-1 S.No-1 (vii)(Volume Solids, Min)	-	1000	-
Clause-4.3 Table-1 S.No-1 (viii)(Flexibility and adhesion)	-	1000	-
Clause-4.3 Table-1 S.No-1 (ix)(Scratch hardness)	-	500	-
Clause-4.3 Table-1 S.No-1 (x)(Stripping test)	-	500	-
Clause-4.3 Table-1 S.No-1 (xi)(Resistance to salt spray)	-	2000	-
Clause-4.3 Table-1 S.No-1 (xii)(Presence of rosin and rosin derivatives)	-	2000	-
Clause-4.3 Table-1 S.No-1 (xiii)(Lead restriction except for red, yellow and green colours)	-	1000	-
Clause-4.3 Table-1 S.No-1 (xix)(Flash point)	-	500	-
Clause-4.3 Table-1 S.No-1 (xv)(Accelerated storage stability test)	-	2000	-
Clause-4.3 Table-1 S.No-1 (xvi)(Durability)	-	6000	-
Clause-5(Packing and Marking )	-	500	-

28 Aug, 2028

-
-

IS 13871 (2021)

Powder Coating - Specification

ALL

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause-6.1 (Description)	-	500	-
Clause-6.2(Particle Size Distribution)	-	4000	-
Calsue-6.3(Relative Density)	-	500	-
Clause-6.5.1(Material shall be tested)	-	1000	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (i)(Dry film thickness)	-	500	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (ii)(Finish)	-	500	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (iii)(Gloss 60°)	-	500	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (iv)(Scratch hardness at 3000 g)	-	500	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (v)(Flexibility on 6.25 mm mandrel)	-	500	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (vi)(Cross cut adhesion)	-	500	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (vii)(Cupping test, mm)	-	500	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (viii)(Impact resistance (direct/reverse), kg/cm)	-	500	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (x), a)(Resistance to humidity)	-	4000	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (x), b)(Resistance to salt spray)	-	2000	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (xi)(Resistance to boiling water 1/2 h at 100 °C)	-	500	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (xii)(Resistance to lubricating oil, SAE 30)	-	1000	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (xiii)(Resistance to petrol)	-	1000	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (xiv)(Resistance to heat double bake schedule)	-	1000	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (xv)(Resistance to bleeding)	-	1000	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (xvi)(Resistance to detergents)	-	1000	-
Clause-.6.6 & 9.1 Table-1 S.No-1 (xvii)(Resistance to acid/alkali)	-	1000	-
Clause-7(Packing and Marking)	-	500	-
Cl-6.7.1(ECO Mark-General Requirements)	-	500	-
Cl-6.7.2.1(ECO Mark-Specific Requirements : Volatile organic compounds)	-	1000	-
Cl-6.7.2.3(ECO Mark-Specific Requirements : Free from carcinogenic ingredients)	-	500	NA

28 Aug, 2028

-
-

IS 13238 (2021)

EPOXY BASED ZINC PHOSPHATE PRIMER TWO PACK - SPECIFICATION FIRST REVISION

22000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Composition)	-	2000	-
4.2(Lead Restriction)	-	1000	-
5(Packing and marking)	-	500	-
4.3, Table 1(i) Consistency)	-	500	-
4.3, Table 1(ii) Drying time, Max, h:)	-	2000	-
4.3, Table 1(iii) Finish)	-	500	-
4.3, Table 1(iv) Colour)	-	500	-
4.3, Table 1(v) Dry film thickness per coat:)	-	500	-
4.3, Table 1(vi) Volume solids, percent, Min)	-	1000	-
4.3, Table 1(vii) Flexibility and adhesion: a) Bend test)	-	500	-
4.3, Table 1(vii) Flexibility and adhesion: b) Scratch hardness)	-	500	-
4.3, Table 1(viii) Flash point (for each component))	-	500	-
4.3, Table 1(ix) a) Resistance to humidity)	-	4000	-
4.3, Table 1(ix) b) Resistance to salt spray)	-	2000	-
4.3, Table 1(x) Pot life)	-	1000	-
4.3, Table 1(xi) Mass)	-	500	-
4.3, Table 1(xii) Keeping properties)	-	2000	Keeping properties test report will be done after 12 months
Clause-4.1 (Composition)	-	2000	-
Clause-4.1.1.1(Epoxy resin)	-	1000	-
Clause-4.1.1.2(Zinc phosphate)	-	1000	-
Clause-4.2(Lead Restriction)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (i)(Consistency)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (ii)(Drying time, Max, h:)	-	2000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (iii)(Finish)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (iv)(Colour)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (v)(Dry film thickness per coat:)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (vi)(Volume solids, percent, Min)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (vii), a)(Bend test (with 6.25 mm dia mandrel and type 1 apparatus))	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (vii), b)(Scratch hardness (1 500 g))	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (viii)(Flash point (for each component))	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (ix), a)(Resistance to humidity)	-	4000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (ix), b)(Resistance to salt spray)	-	2000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (x)(Pot life, h, 27 ± 2 °C, Min)	-	1000	-
Clause-4.3 & 7.1 Table-1 S.No-1 (xi)(Mass, in kg/10 Iitre, Min)	-	500	-
Clause-4.3 & 7.1 Table-1 S.No-1 (xii)(Keeping properties)	-	2000	-
Clause-5(Packing and Marking )	-	500	-

28 Aug, 2028

-
-

IS 14314 (1995)

Thtnner,general purpose,for synthetic paints and varnishes - Specification

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 5.1, Clause 4.2, Table 1 (Sr.No. x)(Keeping Quality (Copper corrosion))	-	500	Keeping quality test report will be done after 12 months
Clause 5.1, Clause 4.2, Table 1 (Sr.No. ix)(Keeping Quality (Water content))	-	500	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. viii)(Keeping Quality (Hydrocarbon content))	-	800	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. vii)(Keeping Quality (Residue on evaporation))	-	500	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. vi)(Keeping Quality (Flash point (Abel)))	-	500	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. v)(Keeping Quality (Distillation range))	-	500	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. iv)(Keeping Quality (Relative density at 27 °C))	-	500	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. iii)(Keeping Quality (Spot test))	-	200	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. ii)(Keeping Quality (Odour))	-	200	-
Clause 5.1, Clause 4.2, Table 1 (Sr.No. i)(Keeping Quality (Colour))	-	500	-
Clause 4.2, Table 1 (Sr.No. x)(Copper corrosion)	-	500	-
Clause 4.2, Table 1 (Sr.No. ix)(Water content)	-	500	-
Clause 4.2, Table 1 (Sr.No. viii)(Hydrocarbon content)	-	800	-
Clause 4.2, Table 1 (Sr.No. vii)(Residue on evaporation)	-	500	-
Clause 4.2, Table 1 (Sr.No. vi)(Flash point (Abel))	-	500	-
Clause 4.2, Table 1 (Sr.No. v)(Distillation range)	-	500	-
Clause 4.2, Table 1 (Sr.No. iv)(Relative density at 27 °C)	-	500	-
Clause 4.2, Table 1 (Sr.No. iii)(Spot test)	-	200	-
Clause 4.2, Table 1 (Sr.No. ii)(Odour)	-	200	-
Clause 4.2, Table 1 (Sr.No. i)(Colour)	-	500	-

28 Aug, 2028

-
-

IS 12744 : Part 1 (2013)

Ready mixed paint, air drying, red oxide - Zinc phosphate, priming - Specification: Part 1 for domestic and decorative applications (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.3, 8.1 - Table 1 -xiii)(Keeping Properties)	-	3500	Keeping properties test report will be complete after 12 months
Cl.5.3, 8.1 - Table 1 -xii)(Mass)	-	1000	-
Cl.5.3, 8.1 - Table 1 -xi)(Flash Point)	-	1000	-
Cl.5.3, 8.1 - Table 1 -x) b)(Resistance to humidity under conditions of condensation a) Resistance to Salt Spray (for 96 Hours))	-	2000	-
Cl.5.3, 8.1 - Table 1 -x) a)(Resistance to humidity under conditions of condensation a) Resistance to humidity (for 7 days))	-	3500	-
Cl.5.3, 8.1 - Table 1 -ix) b)(Flexibility and adhesion b) Bent Test (with 6.25 mm dia mendrel in type 1 apparatus)	-	1000	-
Cl.5.3, 8.1 - Table 1 -ix) a)(Flexibility and adhesion a) Scratch Hardness (Load 800 g))	-	1000	-
Cl.5.3, 8.1 - Table 1 -viii)(Red Oxide (as Fe2O3) )	-	1500	-
Cl.5.3, 8.1 - Table 1 -vii)(Zinc Phosphate)	-	1500	-
Cl.5.3, 8.1 - Table 1 -vi)(Pigment Content)	-	1000	-
Cl.5.3, 8.1 - Table 1 -v)(Wet Opacity)	-	1000	-
Cl.5.3, 8.1 - Table 1 -iv)(Colour in Natural Daylight)	-	500	-
Cl.5.3, 8.1 - Table 1 -iii)(Finish)	-	500	-
Cl.5.3, 8.1 - Table 1 -ii)(Consistency )	-	500	-
Cl.5.3, 8.1 - Table 1 -i)(Drying time hard dry)	-	1000	-
Cl.5.2(Lead Restriction)	-	1000	-

28 Aug, 2028

-
-

IS 2932 (2013)

Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)

Under Coating, Finishing

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.4(Skin Formation)	-	500	-
6.3(Freedom from Coarse Particles)	-	500	-
6.5(Thinning Properties)	-	500	-
6.6(Application Properties)	-	500	-
6.8(Lead Restriction)	-	700	-
6.9 Table 2 (1) a. Consistency ( Undercoating and Finishing ) )	-	200	-
6.9 Table 2 (1) b. Viscosity by ford 80-120 s )	-	500	-
6.9 Table 2 ( 2) Mass, ( Under coating ) )	-	500	-
6.9 Table 2 ( 2) Mass, (Finishing ) )	-	500	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Under coating ) )	-	500	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Finishing ) )	-	500	-
6.9 Table 2 (b) Hard dry ( Under coating ) )	-	500	-
6.9 Table 2 (b) Hard dry, (Finishing ) )	-	500	-
6.9 Table 2 (c) Tack free ( Under coating (Finishing ) )	-	500	-
6.9 Table 2 (4) a) Finish (Under coating ) )	-	500	-
6.9 Table 2 (4) a) Finish (Finishing) )	-	500	-
6.9 Table 2 (b) ) Gloss 60º (Under coating ) )	-	500	-
6.9 Table 2 (5) Fineness of grind,(Under coating ))	-	500	-
6.9 Table 2 (5) Fineness of grind,(Finishing))	-	500	-
6.9 Table 2 (6) Colour , (Finishing))	-	500	-
6.9 Table 2 (7) Flexibility and adhesion: a) Scratch hardness No such scratch as to show the bare metal after Clause 3 of — (Load 1 000 g) ( Under coating & Finishing ) )	-	500	-
6.9 Table 2 (b) Bend test (with 6.25 mm 48 h of air in type 1 apparatus) ( Under coating & Finishing ) )	-	500	-
6.9 Table 2 (8) Flash point ( Under coating & Finishing ) )	-	500	-
6.9 Table 2 (9) Composition: a) Volume solids ( Under coating ))	-	1000	-
6.9 Table 2 (9) Composition: a) Volume solids ( Finishing))	-	1000	-
6.9 Table 2 (9) Composition:b) Phthalic anhydride content of non-volatile vehicle ( Under coating & Finishing ))	-	1000	-
6.9 Table 2 (10) Resistance to acid ( Under coating & Finishing ))	-	500	-
6.9 Table 2 (11) Resistance to alkali ( Under coating & Finishing ))	-	500	-
6.9 Table 2 (12) Accelerated storage stability test ( Under coating & Finishing ))	-	1000	-
6.9 Table 2 (13) Keeping properties ( Under coating & Finishing ))	-	3200	Keeping properties test report will be done after 12 months
6.9 Table 2 (14) Wet opacity ( Under coating & Finishing ))	-	500	-
6.3(Freedom from Coarse Particles)	-	500	-
6.4(Skin Formation)	-	500	-
6.5(Thinning Properties)	-	500	-
6.6(Application Properties)	-	500	-
6.8(Lead Restriction)	-	500	-
6.9 Table 2 (1) a. Consistency ( Undercoating and Finishing ) )	-	200	-
6.9 Table 2 (1) b. Viscosity by ford 80-120 s )	-	500	-
6.9 Table 2 ( 2) Mass, ( Under coating ) )	-	500	-
6.9 Table 2 ( 2) Mass, (Finishing ) )	-	500	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Under coating ) )	-	500	-
6.9 Table 2 (3) Drying time, a) Surface dry, ( Finishing ) )	-	500	-
6.9 Table 2 (b) Hard dry ( Under coating ) )	-	500	-
6.9 Table 2 (b) Hard dry, (Finishing ) )	-	500	-
6.9 Table 2 (c) Tack free ( Under coating (Finishing ) )	-	500	-
6.9 Table 2 (4) a) Finish (Under coating ) )	-	500	-
6.9 Table 2 (4) a) Finish (Finishing) )	-	500	-
6.9 Table 2 (b) ) Gloss 60º (Under coating ) )	-	500	-
6.9 Table 2 (b) ) Gloss 60º (Finishing) )	-	500	-
6.9 Table 2 (b) ) Gloss 60º (Finishing) )	-	500	-
6.9 Table 2 (5) Fineness of grind,(Under coating ))	-	500	-
6.9 Table 2 (5) Fineness of grind,(Finishing))	-	500	-
6.9 Table 2 (6) Colour , (Finishing))	-	500	-
6.9 Table 2 (7) Flexibility and adhesion: a) Scratch hardness No such scratch as to show the bare metal after Clause 3 of — (Load 1 000 g) ( Under coating & Finishing ) )	-	500	-
6.9 Table 2 (b) Bend test (with 6.25 mm 48 h of air in type 1 apparatus) ( Under coating & Finishing ) )	-	500	-
6.9 Table 2 (8) Flash point ( Under coating & Finishing ) )	-	500	-
6.9 Table 2 (9) Composition: a) Volume solids ( Under coating ))	-	1000	-
6.9 Table 2 (9) Composition: a) Volume solids ( Finishing))	-	1000	-
6.9 Table 2 (9) Composition:b) Phthalic anhydride content of non-volatile vehicle ( Under coating & Finishing ))	-	1000	-
6.9 Table 2 (10) Resistance to acid ( Under coating & Finishing ))	-	500	-
6.9 Table 2 (11) Resistance to alkali ( Under coating & Finishing ))	-	500	-
6.9 Table 2 (12) Accelerated storage stability test ( Under coating & Finishing ))	-	1000	-
6.9 Table 2 (13) Keeping properties ( Under coating & Finishing ))	-	3200	-
6.9 Table 2 (14) Wet opacity ( Under coating & Finishing ))	-	500	-
6.7.1.3(QUV apparatus)	-	2500	-
6.2(Condition in container)	-	100	-
7.2(Marking)	-	100	-
7.3(BIS Certification Marking)	-	500	-
6.1.1(General- Rosin test)	-	500	-
6.1.2(Total Non-Volatile Content)	-	500	-
6.7.2(Bulk supply)	-	0.0	NA
6.7.2.1(Bulk supply-Gloss (specular 60º) retention)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics- Colour)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics- Colour)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics-Freedom from Checking)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics-Freedom from Cracking)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics-Freedom from Flaking)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics-Freedom from Chalking)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics-Freedom from Spotting)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics-Freedom from Blisters and Corrosion)	-	0	NA
6.7.2.2(Bulk supply- Film characteristics-Protection against corrosion)	-	0	NA
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 1. Visual observation (Corrosion and odour of putrefaction, rancidity or souring) [Cl 3.1 of IS 101 (Part 6/Sec 2)]")	-	3200	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 2. Change in skinning [Cl.3.1,Table 1 of IS 101 (Part 6/Sec 2)]")	-	800	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 3. Degree of settling [Cl.3.2,Table 2 of IS 101 (Part 6/Sec 2)]")	-	800	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 4. Observation of dried film [Cl.3.4, Table 1 of IS 101 (Part 6/Sec 2)]")	-	800	-
" 6.9 Table 2, xiii) Keeping properties "("Keeping properties 5. Loss of mass resulting from Storage [Cl.3.5 of IS 101 (Part 6/Sec 2)]")	-	800	Keeping Properties test report will be done after 1 year.

28 Aug, 2028

-
-

IS 158 (2015)

Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)

16100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Lead Restriction)	-	500	-
4.1(Composition)	-	500	-
Cl 4.3, Table 1, S.no. i)(Drying time, Hard dry)	-	500	-
Cl 4.3, Table 1, S.no. ii)(Consistency)	-	200	-
Cl 4.3, Table 1, S.no. iii)(Finish)	-	200	-
Cl 4.3, Table 1, S.no. iv)(Wet opacity)	-	500	-
Cl 4.3, Table 1, S.no. v)(Colour)	-	500	-
Cl 4.3, Table 1, S.no. vi)( Mass)	-	500	-
Cl 4.3, Table 1, S.no. vii)(Water content)	-	500	-
Cl 4.3, Table 1, S.no.viii)(Flexibility and adhesion)	-	500	-
Cl 4.3, Table 1, S.no. ix)(Stripping test )	-	500	-
Cl 4.3, Table 1, S.no. x)(Protection against corrosion under conditions of condensation)	-	2000	-
Cl 4.3, Table 1, S.no.xi)(Volatile matter, perce)	-	500	-
Cl 4.3, Table 1, S.no.xii)(Resistance to acid)	-	500	-
Cl 4.3, Table 1, S.no.xiii)(Resistance to alkali)	-	500	-
Cl 4.3, Table 1, S.no.xiv)(Resistance to Heat)	-	500	-
Cl 4.3, Table 1, S.no.xv)(Flash point ,)	-	500	-
Cl 4.3, Table 1, S.no.xvi)(Keeping properties)	-	7200	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	200	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	200	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(IS 101 Part 6 Sec 2)	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(Keeping properties (Visual Observation))	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(Keeping properties (Visual Observation))	-	2000	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(Keeping properties (Degree of settling))	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(Keeping properties (Change in Skinning))	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(Keeping properties (Dried film))	-	500	Keeping Properties test will be performed after one year as per standard.
Cl 4.3, Table 1, S.no.xvi) (Keeping properties)(Keeping properties (Loss of Mass))	-	500	Complete testing charges including Keeping Properties is INR 16100/- For Keeping Properties testing charges is INR 8900/- Test Charges excluding keeping properties test is INR 7200/- Keeping properties test report will be done after one year.

28 Aug, 2028

-
-

Bureau of Indian Standards

The National Standards Body of India

MS TESTING LABORATORY LLP

A-4/3/19, SSGT Road Industrial Area, Ghaziabad- 201001, U.P., Ghaziabad, Ghaziabad, Uttar Pradesh, 201001

9911590577 mstestinglab@gmail.com

Scope List