BIS - LIMS (Laboratory Information Management System)

Delta Testing and Research Laboratories Private Limited (C5)

Plot No. C-5, Block - C, Main Kanjhawala Road, Rajiv Nagar, Delhi, North West, Delhi, 110086

9811037450 info@deltatestinglab.com

Scope List

Reset

109 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 18256 (2023)

Solid Round Glass Fibre Reinforced Polymer (GFRP) Bars for Concrete Reinforcement - Specification

All type of Grade / Type / Size / Designation etc.

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
(clause 5.1)(Fibre content (mass fraction))	-	10000	-
(clause 5.4.2)(Measured cross sectional area)	-	10000	-
(clause 6.1 and 8.2.3)(Ultimate Tensile force)	-	10000	-
(clause 6.2)(Tensile modulus of elasticity)	-	10000	-
(clause 6.4)(Transverse shear strength)	-	10000	-
(clause 6.5)(Bond Strength)	-	10000	-
(clause 7.1)("Moisture absorption (Short term & Long Term)")	-	10000	-
(clause 7.2)(Resistance to Alkaline Environment)	-	10000	-
(clause 8.2.4)(Guaranteed ultimate tensile force at 90 degree and tensile modulus of elasticity of bent bar)	-	10000	-
(clause 5.2)(Glass transition temperature)	-	0	-
(clause 5.3)(Degree of Cure)	-	0	-
(clause 6.6)(Fatigue Tensile Strength)	-	0	-
(clause 6.7)(Creep Failure)	-	0	-
(clause 7.3)(Longitudinal Wicking)	-	0	-
(clause 6.3)(Ultimate Tensile Strain)	-	10000	-
(Table 1)("Minimum bend radius in case of bent bars")	-	10000	-
(clause 5.1)(Fibre content (mass fraction))	-	10000	-
(clause 5.4.2)(Measured cross sectional area)	-	10000	-
(clause 6.1 and 8.2.3)(Ultimate Tensile force)	-	10000	-
(clause 6.2)(Tensile modulus of elasticity)	-	10000	-
(clause 6.4)(Transverse shear strength)	-	10000	-
(clause 6.5)(Bond Strength)	-	10000	-
(clause 7.1)("Moisture absorption (Short term & Long Term)")	-	10000	-
(clause 7.2)(Resistance to Alkaline Environment)	-	10000	-
(clause 8.2.4)(Guaranteed ultimate tensile force at 90 degree and tensile modulus of elasticity of bent bar)	-	10000	-
(clause 6.3)(Ultimate Tensile Strain)	-	10000	-
(Table 1)("Minimum bend radius in case of bent bars")	-	10000	-

21 Aug, 2027

-
"1 (clause 5.2) (Glass transition temperature) Glass transition temperature Equipment for the particular test is not available. 2 (clause 5.3) (Degree of Cure) Degree of Cure Equipment for the particular test is not available. 3 (clause 6.6) (Fatigue Tensile Strength) Fatigue Tensile Strength Equipment for the particular test is not available. 4 (clause 6.7) (Creep Failure) Creep Failure Equipment for the particular test is not available. 5 (clause 7.3) (Longitudinal Wicking) Longitudinal Wicking Equipment for the particular test is not available."

IS 1239 : Part 1 (2004)

Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

All type of Grade / Type / Size / Designation

8400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 513(NITROGEN)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 513(MICRO ALLOY)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 513(ALUMINIUM)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 513(SILICON)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 513(MANGANESE)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 513(PHOSPHORUS)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 513(SULPHUR)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 513(CARBON)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(COPPER)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(NITROGEN)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(ALUMINIUM)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(SILICON)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(MANGANESE)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(SULPHUR)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(CARBON)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Clause - 6.1.1, Table-1( ALUMINIUM)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Clause - 6.1.1, Table-1(SILICON)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Clause - 6.1.1, Table-1(NITROGEN)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Clause - 6.1.1, Table-1(MANGANESE)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Clause - 6.1.1, Table-1(PHOSPHURS)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Clause - 6.1.1, Table-1(SULPHUR)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Clause - 6.1.1, Table-1( CARBON)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
12 AND AS PER IS 4736(UNIFORMITY OF ZINC COATING)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
12 AND AS PER IS 4736(MASS OF ZINC COATING)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 513(NITROGEN)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 513(MICRO ALLOY)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 513(ALUMINIUM)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 513(SILICON)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 513(MANGANESE)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 513(PHOSPHORUS)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 513(SULPHUR)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 513(CARBON)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(COPPER)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(NITROGEN)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(MICRO ALLOY)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(ALUMINIUM)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(SILICON)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(CARBON EQUIVALENT)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(MANGANESE)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(PHOSPHORUS)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(SULPHUR)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2 AND AS PER IS 10748(CARBON)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.1.1(MANGANESE)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.1.1(PHOSPHORUS)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.1.1(SULPHUR)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.1.1(CARBON)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl. 6.1.1, table1 of IS 1239(Part1)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl. 6.1.1, table1 of IS 1239(Part1)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl. 6.1.1, table1 of IS 1239(Part1)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl. 6.1.1, table1 of IS 1239(Part1)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl. 15(Workmanship)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl. 14.3(Flattening test (Over 50 mm NB))	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl. 14.2(Bend Test (uto and including 50 mm NB))	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl. 14.1.1(Elongation)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl. 14.1(Tensile Strength)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl. 3.3, 10.2(Plain End)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl. 11(Length)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl. 8, 9 Table 3,4 & 5(Mass of Tube)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl. 6.5(Height of Internal Fin)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl. 8, 9 Table 3,4 & 5(Thickness)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl. 8 Table 3,4 & 5(Outside Diameter)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Clause 14.1.1(Elongation Percent)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Clause 11.3(Approximate Length)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Clause 11.2(Exact Length)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Clause 11.1(Random Length)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Clause 8.1 (Table3,4,5)(Nominal Bore )	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl 15(Workmanship)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl 14(Tensile Test, Flattening Test & Bend Test)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl 12(Workmanship)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl 10.1.1(Manufacturing )	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl 10.1(Manufacturing )	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
Cl 8(Outer Diameter, Thickness & Mass)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
17(Marking)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
cl.17(MARKING)	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
6.2(Carbon Equivalent as CE- IS:8811-98(RA12))	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
CL 08 & 09("1.Outer dia (04) 2.Thickness (08)")	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
CL 08 & 09(Minimum Outer dia (04))	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
CL 08 & 09(" Minimum Thickness (08)")	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
CL 08 & 09(Maximum Thickness (08))	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.
CL 08 & 09(Maximum Outer dia (04))	-	200	10% Discount to BIS and 1.5 times of mentioned testing charges for others.

21 Aug, 2027

-
-

IS 737 (2024)

WROUGHT ALUMINIUM AND ALUMINIUM ALLOY SHEET AND STRIP FOR GENERAL ENGINEERING PURPOSES SPECIFICATION (Fifth Revision)

All Grade / Type / Size / Designation etc.

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Ordering Information - IS 737)	-	0	Test Not Applicable
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	0	Test Not Applicable
Cl. 4 (b)(Condition - IS 737)	-	0	Test Not Applicable
Cl. 4 (c)(Quantity in Kg - IS 737)	-	0	Test Not Applicable
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (g)(Packing Mode - IS 737)	-	0	Test Not Applicable
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Freedom from Defects - IS 737)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Al - IS 504)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.2(Bend Test - IS 1599)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 9(Condition - IS 737/ IS 5052)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11(Selection of Test Samples - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 12(Retests - IS 737/ IS 10259)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 13(Packaging - IS 737/ IS 10259)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 13.1(Marking - IS 737)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 4(Ordering Information - IS 737)	-	0	Test Not Applicable
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	0	Test Not Applicable
Cl. 4 (b)(Condition - IS 737)	-	0	Test Not Applicable
Cl. 4 (c)(Quantity in Kg - IS 737)	-	0	Test Not Applicable
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (g)(Packing Mode - IS 737)	-	0	Test Not Applicable
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Freedom from Defects - IS 737)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Al - IS 504)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.2(Bend Test - IS 1599)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 9(Condition - IS 737/ IS 5052)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11(Selection of Test Samples - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 12(Retests - IS 737/ IS 10259)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 13(Packaging - IS 737/ IS 10259)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 13.1(Marking - IS 737)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 4(Ordering Information - IS 737)	-	0	Test Not Applicable
Cl. 4 (a)(Grade/ Thickness - IS 737)	-	0	Test Not Applicable
Cl. 4 (b)(Condition - IS 737)	-	0	Test Not Applicable
Cl. 4 (c)(Quantity in Kg - IS 737)	-	0	Test Not Applicable
Cl. 4 (d)(Size - Thickness X Width X Length (T X W X L) in mm for sheets and (T X W) in mm for Strips/ Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (e)(Coil ID and Coil Weight for Strips/ Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (f)(Core/ Spool Requirement for Coils - IS 737)	-	0	Test Not Applicable
Cl. 4 (g)(Packing Mode - IS 737)	-	0	Test Not Applicable
Cl. 5(Supply for Material - IS 737/ IS 10259)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Freedom from Defects - IS 737)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Chemical Composition - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Si - IS 504 (Part-1)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Fe - IS 504 (Part-2)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Cu - IS 504 (Part-3)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Mn - IS 504 (Part-5)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Mg - IS 504 (Part-6)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Cr - IS 504 (Part-8)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Zn - IS 504 (Part-4)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Ti - IS 504 (Part-11)/ ASTM E 1251/ IS 11035)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Others (Each) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Others (Total) - IS 504/ IS 504 (Part-1 to 12)/ IS 504 (Part-13 to 16)/ ASTM E 1251/ IS 11035)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7(Al - IS 504)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8(Mechanical Properties - IS 1608 (Part-1))	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(0.2% Proof Stress - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(Tensile Strength - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.1(Elongation on 50mm Gauge Length - IS 1608 (Part-1))	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 8.2(Bend Test - IS 1599)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 9(Condition - IS 737/ IS 5052)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 10(Dimensions and Tolerances - IS 737/ IS 2676)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11(Selection of Test Samples - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11.1(Sheet and Strip of Aluminium or Non - Heat Treatable Aluminium Alloy - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 11.2(Sheet and Strip of Heat - Treatable Aluminium Alloys - IS 737)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 12(Retests - IS 737/ IS 10259)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 13(Packaging - IS 737/ IS 10259)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 13.1(Marking - IS 737)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f 18.12.2024

IS 1729 (2023)

SAND CAST IRON SPIGOT AND SOCKET PIPES, FITTINGS AND ACCESSORIES ï¿½ SPECIFICATION

All Grade / Type / Size / Designation

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2, (i)(Supply of material)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.1(Manufacture of cast iron)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2(Screws, bolts and fittings)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.3(The pipes, fittings and accessories)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.4(The pipes and fittings)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.5(Brinell hardness test)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-6(Hammer Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.1(Leakage Test)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8(Range of nominal diameters)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9, Table- 1 (a), (i)(Pipe- Internal dia (Min), A)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9, Table- 1 (a), (ii)(Pipe- External dia (Max), B)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9, Table- 1 (a), (iii)(Pipe- Wall thickness, C)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9, Table- 1 (a), (iv)(Pipe- Tolerance on, C)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9, Table- 1 (a), (v)(Pipe- Dia of spigot bead (Max), E)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9, Table- 1 (b), (i)(Socket-Internal dia (Min), F)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9, Table- 1 (b), (ii)(Socket-External dia (Max), G)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9, Table- 1 (b), (iii)(Socket-Thickness, H)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9, Table- 1 (b), (iv)(Socket -Tolerance on, H)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9, Table- 1 (b), (v)(Socket- Internal depth, J)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9, Table- 1 (b), (vi)(Socket- Outside dia over beads (Min), K)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9, Table- 1 (b), (vii)(Socket- Ears length of flange, U)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9, Table- 1 (b), (viii)(Socket- Centre to centre hole, V)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.3 (i)(Tolerance on length-Pipes)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.3 (ii)(Tolerance on length-Fittings)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.5(Tolerances for dimensions)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.6(Internal depth of socket)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-10(Coatings Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f 27.11.2024

IS 710 (2024)

MARINE PLYWOOD - SPECIFICATION (Third Revision)

All Grade / Type / Size / Designation

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Timber)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-4.2(Adhesive)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-5.1(Veneers)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-5.2.1(Glueing)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl -5.2.2(Thickness of Veneers)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl - 5.2.3.1(Joint in Veneers)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl - 5.2.3.2(Edge joints)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl - 5.2.3.3(End joints)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl - 5.2.3.4(Scarf joints)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl - 5.2.4(Grain Direction)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-5.3(Treatment)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-5.4(Moisture Content)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1(Dimensions (length))	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.2(Thickness)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.3(Squareness)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, 7.2, 7.3, 7.4, 7.5 & 7.6(Workmanship and finish)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.3(Moisture Content)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.4.2(Glue Adhesion in Dry State- Adhesion of Plies)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.4.1(Glue Adhesion in Dry State- Glue Shear Strength -Average)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.5.1.1(Glue Adhesion in Water Resistance - Glue Shear Strength -Average)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.5.1.2(Water Resistance Test-Adhesion of plies)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.5.2(Water Resistance Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.6(Tensile Strength-Along the grain)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.7(Mycological Test -Adhesion)	-	2000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.8, Table-2(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.9, Table-3 (i) a(Wet Bending Strength- Modulus of Elasticity (MOE)- Average)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.9, Table-3 (i) b(Wet Bending Strength- Modulus of Elasticity (MOE),-Minimum individual)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.10(Retention of Preservative)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.11(Formaldehyde Content Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.12(Steady-State Formaldehyde Emission Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-9.4.2(Adhesion of Plies)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1.1(Defects in veneers)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f 27.11.2024

IS 303 (2024)

Plywood for General Purposes â Specification (Fourth Revision)

All Grade / Type / Size / Designation etc.

6500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Classification by appearance)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (i)(Blister)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (ii)(Checks)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (iii)(Discolouration)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (iv)(Dote)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (v)(Insect hole)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (vi)(Joints)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (vii)(Knots (dead))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (viii)(Pin knots (dead))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (ix)(Pin knots (live))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (x)(Knots (tight))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (xi)(Patches)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (xii)(Splits)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table- 1 (xiii)(Swirl)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.2, Table-2(Maximum Number of Categories of Permissible Defects, per m2)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-6.1(Timber)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-6.2(Adhesive)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2.1(Thickness of veneers)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2.3(Grain Direction)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2.5.1(Gaps in cores and cross-bands)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2.5.2(Splits)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2.5.3(Overlap)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.1(Dimensions -length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.2(Thickness of the plywood boards)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.3(Squareness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.3.1, 11.3.1.1(Water Resistance Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.3.2(Mycological Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.4(Moisture Content)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.5, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.6(Formaldehyde Content Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11.7(Steady-State Formaldehyde Emission Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f 27.11.2024

IS 617 (2024)

Aluminium and Aluminium Alloys Ingots for Remelting and Castings for General Engineering Purposes â Specification (Fourth Revision)

All Grade / Type / Size / Designation

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6.1, Table-1(Si)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Fe)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Cu)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Mn)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Mg)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Cr)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Ni)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Zn)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Pb)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Sn)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Ti)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Others elements Each)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Others elements Total)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Aluminium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.2(The chemical analysis)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.2(Tensile Tests)	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.3(Test Pieces)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.4(Hardness)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-8(Freedom from Defects)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-11(RETEST)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-13(Marking)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Silicon)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Iron)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Copper)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Manganese)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Magnesium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Chromium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Nickel)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Zinc)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Lead)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Tin)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Titanium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Others Element Each)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Others Element Total)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Aluminium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Silver)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Zirconium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Titanium+Zirconium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Antimony)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Cobalt)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Antimony+Cobalt)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Beryllium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10(Pressure Test)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Si)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Fe)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Cu)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Mn)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Mg)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Cr)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Ni)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Zn)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Pb)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Sn)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Ti)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Others elements Each)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Others elements Total)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.1, Table-1(Aluminium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-6.2(The chemical analysis)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-2(Sand-Cast Alloys- Tensile Strength)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-2(Sand-Cast Alloys- Proof Stress)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-2(Sand-Cast Alloys- Elongation)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-2(Sand-Cast Alloys- Brinell Hardness HBW)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-3(Chill Cast Alloys- Tensile Strength)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-3(Chill Cast Alloys- Proof Stress)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-3(Chill Cast Alloys- Elongation)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-3(Chill Cast Alloys- Brinell Hardness HBW)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-4(Investment-Cast Alloys- Tensile Strength)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-4(Investment-Cast Alloys- Proof Stress)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-4(Investment-Cast Alloys- Elongation)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.1, Table-4(Investment-Cast Alloys-Brinell Hardness)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.2(Tensile Tests)	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.3(Test Pieces)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-7.4(Hardness)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-8(Freedom from Defects)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-11(RETEST)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl-13(Marking)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Silicon)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Iron)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Copper)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Manganese)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Magnesium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Chromium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Nickel)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Zinc)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Lead)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Tin)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Titanium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Others Element Each)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Others Element Total)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Aluminium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Silver)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Zirconium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Titanium+Zirconium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Antimony)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Cobalt)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Antimony+Cobalt)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 6(Beryllium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10(Pressure Test)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f 27.11.2024

IS 14246 (2024)

CONTINUOUSLY PRE-PAINTED GALVANIZED STEEL SHEETS AND STRIPS - SPECIFICATION Second Revision

All Grade / Type / Size / Designation

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Steel Base)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-4.2(Metallic Coating)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-4.3(Organic Coating)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-4.4(Dry Film Thickness)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-4.5(Profiles)	-	250	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-5(Classification of durability of organic coating)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-6.1(Sampling of Test Specimen)	-	250	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-6.2.3(Bend Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-6.3.1(Pencil Hardness Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-6.4(Impact Resistance Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-6.5(Cross Hatch Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-6.6(Solvent Resistance Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-6.7(Other Tests)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-7.3.1(Gloss)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-7.3.2(Colour)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-8.1, Table-4 (i)(Undercut at scribed lines)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-8.1, Table-4 (ii)(Corrosion of the base metal)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-8.1, Table-4 (iii)(Blistering)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-8.2 Table 5 (i)(Undercut at scribed lines)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-8.2 Table 5 (ii)(Blistering)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-9.1(The nominal thickness of sheets)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-9.2(The case of strips)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-9.3(Mass of each pack)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-9.4.1(Tolerances on thickness sheets and strips)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-9.4.2(Width)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-9.4.3(Length)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-9.4.4(Mass)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-10.1(Camber)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-10.2(Deviation from Squareness (Out-of Square)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-10.3(Deviation from Flatness)	-	300	10% Discount to BIS & for others 1.5 times of mentioned testing charges
Cl-14(Marking)	-	250	10% Discount to BIS & for others 1.5 times of mentioned testing charges

21 Aug, 2027

-
Included w.e.f 13.02.2025

IS 12786 (2024)

Irrigation equipment - Polyethylene pipes for irrigation laterals - Specification (first revision)

All Grade / Type / Size / Designation

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Material)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-4.2(Carbon content of finished PE lateral pipe)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-5.1(Dimensions of pipes and wall thicknesses)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-6.0(Visual Appearance)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.1(Hydraulic Characteristics- Internal pressure creep rupture test)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.1(Hydraulic Characteristics- quality acceptance test)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.2(Reversion Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.3(Tensile Test)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.3.1(Test Piece)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.3.2(Procedure)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-7.4(Susceptibility to Environmental Stress Cracking)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-8.0(Supply of pipes)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-9.0(Coiling)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-10.0(Sampling and criteria for conformity)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-11(Marking)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
3(Class of Pipe)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 & Table 1(Dimensions of Pipes - Outside diameters)	-	300	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 & Table 1(Dimensions of Pipes - Wall thickness)	-	300	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6(Visual Appearance)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 & Table 2(Hydraulic Characteristics)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 & Table 2(Hydraulic Characteristics)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Reversion Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Tensile Strength)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Elongation at Break)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4(SusceptibiIity to Environmental Stress Cracking)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(a)(Carbon Black Content-IS 2530)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(b)(Carbon Black Dispersion-IS 2530)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f 27.11.2024

IS 6911 (2017)

Stainless steel plate, sheet and strip - Specification (Second Revision)

All Grade / Type / Size / Designation

11000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.1 & 7.2 Table 1(Carbon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Silicon -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Manganese -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Nickel -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Chromium -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Molybdenum -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Sulphur -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	-
Cl. 7.1 & 7.2 Table 1(Phosphorus -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Nitrogen -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Copper -IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Others-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Titanium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl. 7.1 & 7.2 Table 1(Niobium-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl.12(Corrosion Resistance- IS 10461(Part1))	-	4000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Cl.12(Corrosion Resistance- IS 10461(Part2))	-	4000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
6(Freedom from defects , IS 6911)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1,Table 4&Table 6(Tensile Test - IS 1608(Pt -1))	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.2,Table 4&Table 5(Hardness Test- IS 1500(Pt -1),IS 1501 (Pt-1),IS 1586 (Pt -1))	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.3(Bend Test - IS 1599)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
11,Table 7(Erichsen cupping test-IS 10175)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
15(Surface Finish)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
17(Dimension and tolerance)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Yeild Strength)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(0.2 Percent Proof Stress)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Elongation)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Flatness)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Camber)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Yeild Strength)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(0.2 Percent Proof Stress)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Elongation)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Flatness)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Camber)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Yeild Strength)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(0.2 Percent Proof Stress)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Elongation)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Yeild Strength)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(0.2 Percent Proof Stress)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Yeild Strength)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(0.2 Percent Proof Stress)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Elongation)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Flatness)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Camber)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Any Instrumental Method/Chemical Method)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
4(Supply of Material)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
8(Heat Treatment)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
19(Marking)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5(Manufacture)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Yeild Strength)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(0.2 Percent Proof Stress)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 Amd 2(Elongation)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Length))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Width))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Dimension (Thickness))	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Flatness)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Clause 17 , Table 9 to Table 19(Camber)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1(Alumium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Zirconium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Tungstun)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Tungstun)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Ce)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Cobalt)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
Table 1, Amendment 2(Ta)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Carbon)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Sulphur)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Phosphorus)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Manganese)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Silicon)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Nitrogen)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Copper)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Titanium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Aluminium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Niobium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Nickel)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Chromium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Molybdenum)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
6(Freedom from defect)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 - 4(Tensile Test)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 - 4(Yield strength)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 - 4(Elongation % on 50mm)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.2(Hardness Test)	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.3(Bend Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
11(Erichsen Cupping Test)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
17(Dimension and tolerance)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
12(Corrosion resistance)	-	4000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Carbon)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Sulphur)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Phosphorus)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Manganese)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Silicon)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Nitrogen)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Copper)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Titanium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Aluminium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Niobium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Nickel)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Chromium)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
5.1 - 1(Molybdenum)	-	200	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
6(Freedom from defect)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 - 4(Tensile Test)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 - 4(Yield strength)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.1 - 4(Elongation % on 50mm)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.2(Hardness Test)	-	2500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
10.3(Bend Test)	-	1000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
11(Erichsen Cupping Test)	-	1500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
17(Dimension and tolerance)	-	500	10% Discount to BIS & for others 1.5 times of mentioned testing charges.
12(Corrosion resistance)	-	4000	10% Discount to BIS & for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f. 09.09.2024

IS 3589 (2001)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

All Grade / Type / Size / Designation

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1 Table 2 Table 3(Carbon Content IS 228)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 2 Table 3(Carbon Content IS 228)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 2 Table 3(Carbon Content IS 228)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 2 Table 3(Manganese Content IS 228)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 2 Table 3(Manganese Content IS 228)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 2 Table 3(Manganese Content IS 228)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 2 Table 3(Phosphorus Content IS 228)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1 Table 2 Table 3(Sulphur Content IS 228)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.3(Guided bend test(For SAW Pipes))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Hydaulic pressure test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.1, Table 5.(Outside Diameter (OD))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.1, Table 5.(Thickness)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11.1, Table 5.(Mass)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
12.3.3(Ovality)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
12.5(Strightness)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
14.1(Visual inspection, Appearance and Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
14.2(Visual inspection, Appearance and Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
14.3(Visual inspection, Appearance and Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(below 610 mm OD))	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
14.4(Visual inspection, Appearance and Workmanship-Dent Depth(Above 610 mm OD))	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
14.4(Visual inspection, Appearance and Workmanship-Dent Length)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(CE)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(CE)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(CE)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.3(Guided Bend Test (for SAW Pipes))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.3(Flattening Test for seamless pipes)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2.1(Flattening test for ERW pipes )	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Tensile test-Yield Strength)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Tensile test-Strength)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Tensile test- Elongation)	-	1500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
18(Marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
18(Marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f. 09.09.2024

IS 15909 (2020)

PVC Geomembranes for Lining - Specification ( Second Revision )

All type of Grade / Type / Size / Designation etc.

165000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.0(Types)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Length )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Width )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Specific Gravity)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1( Tensile strength (Longitudinal) ,kg/m2)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Elongation at break (Longitudinal),250 % ,Min)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1( Tensile strength (Transverse) ,kg/m2)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Elongation at break (Transverse),250 % ,Min)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Tear resistance (machine direction))	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Tear resistance (Cross direction))	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Index puncture resistance,N)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Low temperature crack resistance)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Hydrostatic resistance,kg/cm2,Min)	-	8000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Seam strength,kg,Min)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Volatile Loss ,% ,Max)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Peel strength,kN/m,Min)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Resistance to soil burial)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Tensile strength (Longitudinal),% change)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Elongation at break (Longitudinal),% change)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Tensile strength (Transverse),% change)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Elongation at break (Transverse),% change)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Water extraction,% loss in weight)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Stability to ultraviolet radiations,% retension in Tensile strength)	-	50000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 1(Stability to ultraviolet radiations,% retension in Elongation at break)	-	50000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.0(Dimensions and tolerances)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Width)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Thickness at 20kPa pressure)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Tensile Strength (Longitudinal))	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Tensile Strength (Transverse))	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Elongation at break (Longitudinal))	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Elongation at break (Transverse))	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Tear Strength (Machine direction))	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Tear Strength (Cross direction))	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Behaviour during perforation)	-	4500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Height of fall without perforation)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Cold crack resistance at low temperature)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Hydrostatic Pressure Resistance)	-	8000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Dimensional Stability at 80 degree C)	-	15000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Change in length after heating)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Change in width after heating)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Resistance to acid and alkali)	-	5000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Strength of welded seam shear resistance)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Resistance to static puncturing)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Horizontal rate of burning)	-	15000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table-2(Vertical rate of burning)	-	15000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.0(Colour ,Surface characteristics and fredom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Colour ,Surface characteristics and fredom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Colour ,Surface characteristics and fredom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5,Table 2(Specific Gravity)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f 09.04.2025

IS 13488 (2008)

Irrigation equipment - Emitting pipe systems - Specification (First Revision)

All Grade / Type / Size / Designation

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Materials - shall be resistant to fertilizers and chemicals commonly employed in irrigation, and shall be suitable for use with water at temperatures up to 60°C and at pressures designed for the emitting pipe)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2 (Ref. Cl 4.1.a of IS 12786 : 1989)(Potyethylene - higher olefins constituent )	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2 (Ref. Cl 4.1.b of IS 12786 : 1989)(Potyethylene - anti-oxidant)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2 (Ref. Cl 4.1.c.i of IS 12786 : 1989)(Density)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2 (Ref. Cl 4.1.c.ii of IS 12786 : 1989)(Toluene extract - Annex A of IS 12786:1989)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2 (Ref. Cl 4.1.c.iii of IS 12786 : 1989)(Volatile matter - Annex B of IS 12786:1989)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2 (Ref. Cl 4.1.c & 4.2.a of IS 12786 : 1989)(Carbon Black content - IS 2530 : 1963)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2 (Ref. Cl 4.2.b of IS 12786 : 1989)(The dispersion of Carbon Black content shall be satisfactory - IS 2530 : 1963)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2 (Ref. Cl 4.3 of IS 12786 : 1989)(Addition of not more than 10 percent of the manufactures own rework material produced during the manufacture and works testing of pipe complying with this standard is permitted. No other rework material shall be used)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.2(Fittings)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(General)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(General)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.2(Uniformity of Emission Rate for Unregulated Emitting Pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.3(Uniformity of Emission Rate for Regulated Emitting Pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2.1(Unregu/Qt~d Emining Pipe)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2.2(Regulated Emitting Pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.1(Wall Thickness ofEmitting Pipe)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.2(Inside Diameter ofEmitting Pipe)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.3(Flow Paths in Emitting Unit)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.4(Spacing ofEmitter Units)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.1(Resistance to Hydrostatic Pressure at Ambient Temperature)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4.2(Resistance to Hydrostatic Pressure at Elevated Temperature)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.5(Resistance to Tension at Elevated Temperature)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.5(Resistance to Tension at Elevated Temperature)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.5(Resistance to Tension at Elevated Temperature)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.6(Resistance to Pull Out of Joints Between Fitting and Emitting IS 13479)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.7.1(Resistance of PE Emitting Pipe to Environmental Stress Cracking -Acceptance Test Annex D of IS 12786)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.7.2(Resistance of PE Emitting Pipe to Environmental Stress Cracking - Type Test Annex D of IS 12786)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.8(Determination of Emitting Unit Exponent)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(DESIGNATION - Non regulated Emitting Pipe)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(DESIGNATION - Regulated Emitting Pipe)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 a(Identification)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 a(Identification)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 c(Volatile matter Extract)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 d(Density)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 d(MFI @ 1900C/2.16 Kg)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Carbon black content)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Carbon black dispersion)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Materials)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1, Table 1,(i)(Nominal Diameter)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1, Table 1,(ii)(Inside Diameter)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1, Table 1,(iii)(Tolerance on I.D)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1, Table 1,(iv)(Wall Thickness)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(Fittings)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3(General)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Test Specimens)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Order of Tests)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Testing Conditions)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4(Accuracy of Measuring Devices)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(Uniformity of Emission Rate)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.2(Unregulated Emitting Pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1.3(Regulated Emitting Pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2(Emission Rate of Emitting Unit as a Function of Inlet Pressure)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2.1(Unregulated Emitting Pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2.2(Regulated Emitting Pipes)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.1(Wall Thickness ofEmitting Pipe)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.2(Inside Diameter ofEmitting Pipe)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.3(Flow Paths in Emitting Unit)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.3.4(Spacing of Emitter Units)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.4(Resistance of Emitting Pipes to Hydrostatic Pressure)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.5(Resistance to Tension at Elevated Temperature)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.6(Resistance to Pull Out ofJoints Between Fitting and Emitting)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.7.1(Acceptance Test)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.7.2(Type Test)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.8(Determination of Emitting Unit Exponen)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Non-regulated Emitting Pipe)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Regulated Emitting Pipe)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f. 09.09.2024

IS 191 (2007)

Copper - Specification (Fourth Revision)

All Grade / Type / Size / Designation

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4-Table 1(GRADES/DESIGNATIONS)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(L)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(L1)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(h)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(h1)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(b)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(b1)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(R)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(R1)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(R2 )	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(α )	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2( β )	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(γ)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(Billets)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4-Table 3 (For Billets)(Mass)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2-Table 3 (For Billets)(Diameter)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2-Table 3 (For Billets)(Length)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2-Table 3 (For Billets)(Deviation from straightness per 1000 mm length)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4-Table 3 (Vertically continuously cast wire bars)(Mass)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Vertically continuously cast wire bars)(Width)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Vertically continuously cast wire bars)(thickness )	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Vertically continuously cast wire bars)(Other dimention)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4-Table 3 (Vertically static cast wire bars)(Mass)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Vertically static cast wire bars)(Width)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Vertically static cast wire bars)(thickness )	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Vertically static cast wire bars)(Other dimention)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4-Table 3 (Ingots)(Mass)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4-Table 3 (Cast cakes)(Mass)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Cast cakes)(Width)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Cast cakes)(thickness )	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Cast cakes)(Deviation from straightness per 1000 mm length)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Silver- IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Phosphorus- IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Arsenic- IS440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Antimony-IS440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Bismuth-IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Iron IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Lead IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Nickel IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Oxygen IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Selenium - IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Sulphur- IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Tellurium- IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Tin - IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Znic-IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Selenium + Telluuium- IS 440)	-	400	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Total Impurities- IS 440)	-	3500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(FREEDOM FROM DEFECTS)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2(FREEDOM FROM DEFECTS)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1- Table 5(Mass Resistivity- IS 3635)	-	1250	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
10(HYDROGEN EMBRITTLEMENT TEST- IS 191)	-	1250	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4-Table 1(GRADES/DESIGNATIONS)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(L)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(L1)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(h)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(h1)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(b)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(b1)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(R)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(R1)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(R2 )	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(α )	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2( β )	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1- Table 2(γ)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(Billets)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4-Table 3 (For Billets)(Mass)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2-Table 3 (For Billets)(Diameter)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2-Table 3 (For Billets)(Length)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2-Table 3 (For Billets)(Deviation from straightness per 1000 mm length)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4-Table 3 (Vertically continuously cast wire bars)(Mass)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Vertically continuously cast wire bars)(Width)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Vertically continuously cast wire bars)(thickness )	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Vertically continuously cast wire bars)(Other dimention)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4-Table 3 (Vertically static cast wire bars)(Mass)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Vertically static cast wire bars)(Width)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Vertically static cast wire bars)(thickness )	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Vertically static cast wire bars)(Other dimention)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4-Table 3 (Ingots)(Mass)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4-Table 3 (Cast cakes)(Mass)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Cast cakes)(Width)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Cast cakes)(thickness )	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3-Table 3 (Cast cakes)(Deviation from straightness per 1000 mm length)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Silver- IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Phosphorus- IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Arsenic- IS440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Antimony-IS440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Bismuth-IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Iron IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Lead IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Nickel IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Oxygen IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Selenium - IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Sulphur- IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Tellurium- IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Tin - IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Znic-IS 440)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Selenium + Telluuium- IS 440)	-	400	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 - Table 4(Total Impurities- IS 440)	-	3500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(FREEDOM FROM DEFECTS)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2(FREEDOM FROM DEFECTS)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1- Table 5(Mass Resistivity- IS 3635)	-	1250	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
10(HYDROGEN EMBRITTLEMENT TEST- IS 191)	-	1250	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1 , 9.2 & 10(Resistivity & HYDROGEN EMBRITTLEMENT TEST)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1 , 9.2 & 10(Resistivity & HYDROGEN EMBRITTLEMENT TEST)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
13(Marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
13(Marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
13(Marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
"All grades except Cu-DHP, Cu-DPA and Cu-ATP" Included w.e.f 18.12.2024

IS 2062 (2011)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

All Grade / Type / Size / Designation

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 18(Weight)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 15(Length, Width & Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Y Groove Cracking Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Sudden Load Applied)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11.3(Press)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.3(UTM)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 18(Weight)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 15(Length, Width & Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Y Groove Cracking Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Sudden Load Applied)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11.3(Press)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.3(UTM)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 18(Weight)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 15(Length, Width & Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Y Groove Cracking Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Sudden Load Applied)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11.3(Press)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.3(UTM)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E650, CARBON +EQUIVELENT )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15 (Cl. 15 Channel Section: Sweep)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15(Cl. 15 Channel Section: Camber)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Concavity))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15(Cl. 15 Channel Section: Flatness of Web (Convexity))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15(Cl. 15 Channel Section: Flange Out of Square)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15(Cl. 15 Channel Section: Width of Flange)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15(Cl. 15 Channel Section: Depth)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15(Cl. 15 Square Bar: Out of Square)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15(Cl. 15 Square Bar: Side Width: Minimum)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15(Cl. 15 Square Bar: Side Width: Maximum)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15(Cl. 15 Round Bar: Out of Shape)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15(Cl. 15 Round Bar: Diameter Minimum)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15(Cl. 15 Round Bar: Diameter Maximum)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.3 (Cl. 10.3 (Elongation %))	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.3 (Cl. 10.3 (Yield Stress))	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E600, PHOSPHURS)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.3 (Cl. 10.3 (Tensile Strength))	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E650, ALUMINIUM)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E650, SILICON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E650, NITROGEN)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E650 ,MANGANESE)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E650, PHOSPHURS)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E650, SULPHUR)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E650, CARBON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E600, CARBON +EQUIVELENT )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E600, ALUMINIUM)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E600, SILICON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E600, NITROGEN)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E600 ,MANGANESE)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E600, SULPHUR)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E600, CARBON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E550, CARBON +EQUIVELENT )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E550, ALUMINIUM)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E550, SILICON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E550, NITROGEN)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E550 ,MANGANESE)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E550, PHOSPHURS)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E550, SULPHUR)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E550, CARBON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E450, CARBON +EQUIVELENT )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E450, ALUMINIUM)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E450, SILICON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E450, NITROGEN)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E450 ,MANGANESE)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E450, PHOSPHURS)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E450, SULPHUR)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E450, CARBON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E410, CARBON +EQUIVELENT )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E410, ALUMINIUM)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E410, SILICON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E410, NITROGEN)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E410 ,MANGANESE)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E410, PHOSPHURS)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E410, SULPHUR)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E410, CARBON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E350, CARBON +EQUIVELENT )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E350, ALUMINIUM)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E350, SILICON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E350, NITROGEN)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E350 ,MANGANESE)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E350, PHOSPHURS)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E350, SULPHUR)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E350, CARBON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E300, CARBON +EQUIVELENT )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E300, ALUMINIUM)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E300, SILICON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E300, NITROGEN)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E300 ,MANGANESE)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E300, PHOSPHURS)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E300, SULPHUR)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E300, CARBON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E275, CARBON +EQUIVELENT )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E275, ALUMINIUM)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E275, SILICON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E275, NITROGEN)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E275 ,MANGANESE)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E275, PHOSPHURS)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E275, SULPHUR)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E275, CARBON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E250, CARBON +EQUIVELENT )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E250, ALUMINIUM)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E250, SILICON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E250, NITROGEN)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E250 ,MANGANESE)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E250, PHOSPHURS)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E250, SULPHUR)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause - 5, 8.1 & 8.2(E250, CARBON)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Off Centre of Web)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Flange out of square (I beam))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Width of flange (I Beam))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Depth (I Beam))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Mass (Plate))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Flange Slope)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Web Thickness)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Flange Thickness)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Out of Square (Flat))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Width )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Thickness )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Sectional Area )	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Camber (Angle))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Out of Square (Angle))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Weight)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Leg Length Difference (Angle))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Leg Length B (Angle))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Leg Length A (Angle))	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Toe Radius R2)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15, 16(Root Radius R1)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 18(Weight)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 15(Length, Width & Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Y Groove Cracking Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Sudden Load Applied)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11.3(Press)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.3(UTM)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14.1(Soundness test)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14.2(Grain Size)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14.2(Inclusion)	-	2000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(Workmanship)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10.3(UTM)	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 11.3(Press)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 12(Sudden Load Applied)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 13(Y Groove Cracking Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 15(Length, Width & Thickness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 18(Weight)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8, Table 1, Note 2(Any Instrumental Method/Chemical Method)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8, Table 1, Note 5(Any Instrumental Method/Chemical Method)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8, Table 1, Note 5(By Calculation)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8, Table 1, Note 6(Any Instrumental Method/Chemical Method)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8, Table 1, Note 6(By Calculation)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7(IS 2062)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 11.3(IS 1599)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 12(IS 1757)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 15, Table 4(IS 2062)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
16(Tolerance)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
20(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
20(MARKING)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Micro Alloying elements)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Niobium as Nb)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Vanadium as V)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Titanium as Ti)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Tensile Strength-IS:1608(P1)-22)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Yield Stress-IS:1608(P1)-22)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Elongation on SoA 5.65mm GL)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Mass -SOP MT-23)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Sectional Area)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Dimension -D)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Dimension -B)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Thickness - t)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Thickness - T)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Flange Slope)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Radius R1)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Radius R2)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Radius -R1)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Mass -SOP MT-23)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Sectional Area)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Dimension -D)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Dimension -B)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Thickness - t)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Thickness - T)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Radius R1)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Radius R2)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Mass -SOP MT-23)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Sectional Area)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Dimensions AxB)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Thickness - t)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Radius -R2)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Diameter)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Sectional Area)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Mass per metre)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Mass per metre)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Ovality)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Side Width)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Sectional Area)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Mass per metre)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
15(Out of Square)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Preparation of test sample)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8, Table 1, Note 2(Aluminium)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8, Table 1, Note 5(Niobium)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8, Table 1, Note 5(Titanium)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8, Table 1, Note 5(Nb+V+Ti)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8, Table 1, Note 6(Boron)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8, Table 1, Note 6(Cr+Ni)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7(Freedom from Defect)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 11.3(Bend Test)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 12(Impact Test)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 15, Table 4(Dimension)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5(General Requirements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4(MARKING)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f. 09.09.2024

IS 4923 (2017)

Hollow steel sections for structural use - Specification (Third Revision)

All Grade / Type / Size / Designation

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7.1(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1(Aluminium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1(Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1(Niobium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1(Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1(Titanium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1(Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1(Carbon Equivalent-IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Depth))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Width))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Thickness))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Weigth))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Area of Section))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about X-X))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Moment of Inertia about Y-Y))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Radius of Gyration about X-X))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Radius of Gyration about Y-Y))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Elastic Modulus))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about X-X))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Elastic Modulus about Y-Y))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections (Plastic Modulus about X-X))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.9.1, Table 1(Dimensions and Properties of Hollow Sections(Plastic Modulus about Y-Y))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.1, 14.1, 18.1(Straightness)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.2, Fig 1(Outside dimension (B))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.2, Fig 1(Outside dimension (H))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.2, Fig 1(Outside dimension (T))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.4, Fig 2(Concavity, X1)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.4, Fig 2(Convexity, X2)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.5, Fig 3(Squareness of side)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.6, Fig 4(External Corner Radius)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.7, Fig 5(Total twist, V)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15.2, Table 3(Tensile Strength- IS 1608)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15.2, Table 3(Yield Strength- IS 1608)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 15.2, Table 3(Elongation- IS 1608)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 14.1(Exact Length)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 14.1(Random Length)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 14.1(Weight on individual length)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 14.1(Weight on lots of 10 tonnes min)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 18, Note 2(Internal Fin Height (Only for Cold Formed))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7(Micro Alloying elements(Nb+V+Ti))	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7(Carbon equivalent as CE)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
10.4(Concavity/Convexity-SOP MT-23)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
10.5(Squareness of corner/Sides-SOP MT-23)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
10.6("External corner Radius/ Radii of corners-outside - SOP MT-23")	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Oiling & Painting - IS 4923)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
18.1(Height of the internal weld fin - IS 4923)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
10.3(Thickness - IS 4923)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
13(Marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-19(Mechanical Tests)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f. 09.09.2024

IS 17425 (2020)

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

All Grade / Type / Size / Designation etc.

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Dimensions of pipe - i) Outside diameter)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Dimensions of pipe - ii) Wall thickness minimum)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6(Visual Appearance)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Hydraulic Characteristics - Quality test)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1(Hydraulic Characteristics - Acceptance test)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Reversion Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Tensile Test- i) Tensile Strength)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Tensile Test - ii)Elongation at Break)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4(Fusion Compatibility Test- a) Quality test)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4(Fusion Compatibility Test- b) Acceptance test)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.5(Density)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.6(Melt Flow Rate)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.6(Melt Flow Rate)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Carbon black- a)carbon content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Carbon black- b) Dispersion of carbon black)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.6(Melt now Rate (MFR))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.5(Density)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.4 Table-2(Fusion Compatibility Test)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Tensile Test)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2(Reversion Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1 Table -2(Hydraulic Characteristics)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(VISUAL APPEARANCE)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2(Ovality)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 table -1(DIMENSIONS OF PIPES)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.3(Anti-oxidant)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 4.2 , IS 2530-1963, Cl. 10(Cabon Black Content)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.2(The MFR of the material shall be between 0.2 to 1.1 (both inclusive) when tested at 190 T at a nominal load of 50 N by the method prescribed in 7 of IS 2530. The MFR of the material shall also be within 20% of the value declared by the manufacturer.’)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1(density shall be between 940.4 kg/m’ and 958.4 kg/m3 (both inclusive) when determined at 27°C according to procedure prescribed in Annex A of IS 7328. The value of the density shall also not differ from the nominal value by more than 3 kg/m2 as per 5.2.1.1 of IS 7328.)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(melt flow rating (MFR) shall not exceed 1.10 g/10 min.)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3(CLASSIFICATION OF PIPES)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Quick Coupled Male and Female Couplers)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1(Quick Coupled Male and Female Couplers)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.3(Workmanship and appearance)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.4(Holding attachments for coupler parts)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.3(Weldability Test- a) Quality test)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.3(Weldability Test- b) Acceptance test)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3(Quick Coupled pipes)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
3(QUICK COUPLED PIPES)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4(QUICK COUPLED FITTINGS)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 (a)(Quick Coupled Male and Female Couplers)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 (b)(HDPE couplers —)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Aluminium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Copper Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Magnesium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Silicon Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Iron Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Manganese Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Zinc Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Titanium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Chromium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31000(Remarks)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Aluminium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Copper Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Magnesium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Silicon Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Iron Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Manganese Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Zinc Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Titanium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Chromium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 31500(Remarks)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Aluminium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Copper Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Magnesium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Silicon Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Iron Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Manganese Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Zinc Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Titanium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Chromium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 40800(Remarks)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Aluminium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Copper Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Magnesium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Silicon Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Iron Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Manganese Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Zinc Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Titanium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Chromium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 51300(Remarks)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Aluminium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Copper Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Magnesium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Silicon Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Iron Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Manganese Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Zinc Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Titanium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Chromium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 52000(Cr + Mn)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Aluminium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Copper Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Magnesium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Silicon Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Iron Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Manganese Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Zinc Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Titanium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Chromium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 53000(Cr + Mn)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Aluminium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Copper Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Magnesium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Silicon Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Iron Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Manganese Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Zinc Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Titanium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Chromium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 737-2008, Cl. 6, Table-1 , Desig 55000(Cr + Mn)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Copper Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Silicon Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Magnesium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Iron Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Manganese Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Nickel Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Zinc Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Lead Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Tin Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Titanium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.1, IS 617-1994, Cl. 5, Table-1 , Desig 4600(Aluminium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Carbon Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Manganese Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Sulphur Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1)(Phosphorous Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Killed(Aluminium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Si-Killed(Silicon Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Silicon Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
C. 4.1.1.1.2, IS 513 (P-1)-2016, Cl. 7.3, Table-3 , Grade O (CR1) Al-Si-Killed(Aluminium Content)	-	200	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 10(Cabon Black Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 4.1.1.2.1, IS 14151 (P-1)-1999, Cl. 4, IS 2530-1963, Cl. 16(Carbon Black Dispersion)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 .1.2.1(HDPE couplers)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1 .1.2.2(HDPE couplers)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.4(a)(Holding Attachments for Coupler Parts)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.4(b)(Holding Attachments for Coupler Parts)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.1(Quick Coupled ~pe HDPE Fittings)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.2(Quick Coupled ~pe HDPE Fittings)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.3(Quick Coupled ~pe HDPE Fittings)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.4(Quick Coupled ~pe HDPE Fittings)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.5(Quick Coupled ~pe HDPE Fittings)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.6(Quick Coupled ~pe HDPE Fittings)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.7(Quick Coupled ~pe HDPE Fittings)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.7(1 Dimensions of Quick Coupled Pipes and Fittings)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.7(Reducers Table 1 and 2 of IS 8008 (Part 4))	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.7(Ferrule reducers Table 1 of IS 8008 (Part 5))	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.7(Pipe ends Table 1 of IS 8008 (Part 6))	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.7(End caps Table 1 of IS 8008 (Part 9))	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.7(Insert vatve couplers Table 1 of IS 8008 (Part 3))	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.7(Valve openers Table 1 of IS 8008 (Part 2))	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.2(Dimensions of Quick Coupled Sprinkler Saddles Table 1.)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Quick Coupled Pipes and Fittings)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1, 6.1.1.1(Leakage Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.1, 6.1.1.1(Leakage Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.2, 6.1.2.1(Hydraulic Proof Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.2.2(Hydraulic Proof Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.2.2(Hydraulic Proof Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.3, 6.1.3.1(Weldability Test)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.3.1.1(Weldability Test)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1.3.2(Quick coupled fittings)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2, 6.2.1(Quick Coupled Fittings)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2.1(Visual and Workmanship Requirement)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 b(Material Identification - Male & Female Coupler)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.3(Material Identification - Insert Valve Coupler)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.3(Material Identification - Insert Valve Coupler)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.4()	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.5(Material Identification - Saddle)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.5(Material Identification - Pipe Ends)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.3.6(Quick Coupled Pump Connectors - Visual)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Metallic Couplers)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Metallic Couplers)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2.1(Leakage Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3(Den sity Test)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3(MFR Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3(MFR Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3(MFR Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3(MFR Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3(Thermal Stabi lity)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3(Thermal Stabi lity)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Volatile Matter)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Volatile Matter)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Volatile Matter)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Volatile Matter)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Volatile Matter)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Volatile Matter)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Volatile Matter)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.3, T-1(Water Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.4(Carbon Black Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.4(Carbon Black Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.4(Carbon Black Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.4(Carbon Black Di spersion)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.4(Carbon Black Di spersion)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.4.1.4(Carbon Black Di spersion)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.5(Di men sion)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.5.1.l(Outside Diameter)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.5.1.l(Outside Diameter)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.6.2.L(Wall Thickness)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.6.2.4(Workmanship and Appearance)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.6.2.6(Rubber Ring Hardness)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.6.2.6(Ageing Test)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.l(Visual Anneara nce)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.2(Hydraulic Characteristic)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.2(Hydraulic Characteristic)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.2(Hydraulic Characteristic)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.2(Hydraulic Characteristic)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.3(Reversion Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.3(Reversion Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.4(Tensile Test)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.4(Tensile Test)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.4(Tensile Test)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.4(Elongation)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.4(Elongation)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.5(Fusion Compatibility)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.5(Fusion Compatibility)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.5(Fusion Compatibility)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.5(Fusion Compatibility)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.6(Corrected Density)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.7(MFR Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.7(MFR Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.7(MFR Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.1.7(MFR Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.2.l(Leakage Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.2.l(Leakage Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.2.l(Leakage Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.2.l(Leakage Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.2.l(Leakage Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.2.2(Cl.7.2.2)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.2.3(Weld ability Test)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl.7.2.3(Weld ability Test)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 (iii) Rubber Rings (a) Shore hardness(Shore hardness)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2 (iii) Rubber Rings (b) Accelerated Storage test(Accelerated Storage test)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5(Dimensions of pipe (outside diameter, ovality, wall thickness))	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Thermal Stability (OIT))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Volatile Matter)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Water content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Tensile strength at Yield & Elongation at break)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Carbon Black Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.1(Carbon Black Dispersion)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.1(Base Density x 2)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.1(Melt Flow Index x 2)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.1(Thermal Stability (OIT) x 2)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.1(Carbon Black Dispersion x 2)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.1(Volatile Matter x 2)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.1(Water content x 2)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.1(Carbon Black Content x 2)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.1(Wall thickness of male & female coupler)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.4(Workmanship and appearance (Visual))	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.5(Holding attachment for coupler parts)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.5(Material Composition (Chemical Analysis))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2.2(Coating thickness (Hot dip Galvanized or Electroplated or Passivated or Powder Coated))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.6(Material Identification (Chemical Analysis))	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.6(Color)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.6(Rubber Ring Hardness Shore – A (Before Ageing))	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2.6(Ageing Charges for rubber ring)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.1(Visual appearance of pipes)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.2(Hydraulic Characteristics)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.2((a) Acceptance Test (48 hrs) / 80˚ C)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.2((b) Type test ( 165 hrs) / 80˚ C)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.3(Reversion)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.4(Tensile strength & elongation)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.5(Fusion Compatibility test)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.5((a) Acceptance Test (48 hrs) / 80˚ C)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.5((b) Type test ( 165 hrs) / 80˚ C)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.6(Corrected Density)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.6(Base Density)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.6(Carbon black Content)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.7(Melt Flow Rate (MFR))	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2.1(Leakage test 1hour / 27°C)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2.2(Hydraulic Proof test 1hour / 27°C)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2.3((a) Acceptance Test (48 hrs) / 80˚ C)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2.3((b) Type test ( 165 hrs) / 80˚ C)	-	5000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Supply of pipe (Visual))	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Table-1)(Density)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Table-1)(Melt Flow Index)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Table-1)(Oxidation Induction Time)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Table-1)(Volatile Matter)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Table-1)(Water content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1 (Table-1)(Tensile strength at Yield & Elongation at break)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.4(Carbon Black Content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.4(Carbon Black Dispersion)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.1(Polyethylene material)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.3, Table 1,(i)(Bass density)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.3, Table 1,(ii)(Melt flow rate)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.3, Table 1,(iii)(Thermal stability)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.3, Table 1,(iv)(Volatile matter)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.3, Table 1,(v)(Water content)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.3, Table 1,(vi)(Minimum tensile strength at yield)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.3, Table 1,(vii)(Minimum elongation at break)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.4(The Carbon Content and Dispersion)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.5(Carbon Black Specification)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.6(Antioxidant)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.1.7(Rework Material)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
4.2(Metallic Couplers)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1, Table 1,(i)(Plain pipes)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1, Table 1,(ii)(90° Bends and tee)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1, Table 1,(iii)(Base pipe )	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1, Table 1,(iv)(PCN)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1, Table 1,(v)(Reducers, ferrule reducers)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1, Table 1,(vi)(End caps, insert valve coupler, valve openers)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1, Table 1,(vii)(Riser pipe and socket)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.1(Visual Appearance and Workmanship)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.2(Hydraulic Performance Characteristic)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.3(Reversion Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.4(Tensile Test)	-	2500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.5(Fusion Compatibility Test)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.6(Corrected Density)	-	1000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.1.7(Melt flow rate)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2.1(Leakage Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2.2(Hydraulic Proof Test)	-	2000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.2.3(Weldability Test)	-	8000	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
7.3(Quick Couple Fitting)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Marking)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1.2(Squareness)	-	500	10 % Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
Included w.e.f. 09.09.2024

IS 15833 (2009)

Stainless Steel Tower Bolts -specification

All Grade / Type / Size / Designation

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.2(Carbon Content)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Silicon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(nickel)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Carbon Content)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Silicon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(nickel)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Mech)(Phosphorus)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Mech)(Sulphur)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Mech)(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Mech)(nickel)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Mech)(Manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Mech)(Silicon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.2(Mech)(Carbon Content)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 7(0)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6(DIMENSIONS)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 5(MANUFACTURE)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4(MATERIAL)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 3(NOMINAL SIZES)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 3(NOMINAL SIZES)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

IS 4621 (1975)

Specification for indicating bolts for use in public baths and lavatories (First Revision)

All type of Grade / Type / Size / Designation

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4(DIMENSIONS AND TOLERANCES)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7(WORKMANSHIP AND FINISH)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 4.1(Dimension and tolerance)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.2 Table 2(i)(Body, knob and indicating spindle)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.2 Table 2(ii)(Indicating disc)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 5.2 Table 2(iii)(Gears)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 7(Workmanship and finish)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 8(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 9(Packing)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl-6(Manufacture)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.0 Table -2(Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, Cl 10.0(Sulphur Dioxide test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl .5 Table-2(Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl 14(Resistance to crazing deformation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl. 16(Light Reflection Property)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl. 15.0(Fastness of light)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl. 17.0(Electrical Breakdown Potential)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl. 18(continuity of the Anodizing Coating)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl. 12.0(Corrosion Resistance)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl. 12(CASS Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl. 12(AAS Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
IS 1868, cl. 13.0(Abrasion Resistance)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

IS 14246 (2013)

Continuously pre-painted galvanized steel sheets and coils (First Revision)

All Grade / Type / Size / Designation

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4.1(Workmanship)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.2(Workmanship)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.3(Workmanship)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Press)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.3(HWB)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.4(Load Resistance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.5(Cross Hatch)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Salt Spray)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Length, Width, Thickness & Mass)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Workmanship)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.2(Workmanship)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.3(Workmanship)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Press)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.3(HWB)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.4(Load Resistance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.5(Cross Hatch)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Salt Spray)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Length, Width, Thickness & Mass)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Workmanship)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.2(Workmanship)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.3(Workmanship)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Press)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.3(HWB)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.4(Load Resistance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.5(Cross Hatch)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Salt Spray)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Length, Width, Thickness & Mass)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.4.4(Mass)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.2(Out of square)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.3, Table 4(Flatness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 10.1(Camber)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 9.4.2(Width)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.3.1(Gloss Bottom Coat)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.3.1(Gloss Top Coat)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.3.2 Table 3(Color Bottom Coat)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 7.3.2 Table 3(Color Top Coat)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4,4.1,4.2(CARBON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4,4.1,4.2(SULPHUR)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4,4.1,4.2(PHOSPHURS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4,4.1,4.2(MANGANESE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4,4.1,4.2(NITROGEN)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4,4.1,4.2(SILICON)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
4,4.1,4.2(ALUMINIUM)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Length, Width, Thickness & Mass)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Salt Spray)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.5(Cross Hatch)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.4(Load Resistance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.3(HWB)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Press)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.3(Workmanship)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.2(Workmanship)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Workmanship)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.1(Workmanship)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.2(Workmanship)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 4.3(Workmanship)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.2(Press)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.3(HWB)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.4(Load Resistance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 6.5(Cross Hatch)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 8(Salt Spray)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 9(Length, Width, Thickness & Mass)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl 10(Camber, Deviation From Squareness (Out-of- Square) & Deviation From Flatness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

IS 1367 : Part 13 (2020)

Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision )

All Grade / Type / Size / Designation

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1(Chemical Composition)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges,
7.0(Mechanical Propoerties ( Proof load & Tesnsile Strength))	-	3500	10% Discount to BIS and for others 1.5 times of mentioned testing charges,
8.1(Appearance of zinc coating)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges,
8.3(Zinc coating thickness)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges,
8.4(Adhesion of Zinc Coating)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges,

21 Aug, 2027

-
-

IS 1367 : Part 6 (2018)

Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

All Grade / Type / Size / Designation

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Material Testing)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.1(Proof Load)	-	1500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.2(Hardness Test)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9.3(Surface Integrity)	-	2500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

IS 1729 (2002)

Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipeline socket and spigot series (Second Revision)

All type of Grade / Type / Size / Designation

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(phosphorus- IS 210)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(sulphur - IS 210)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(MICROSTRUCTURE)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Tensile Strrngth - IS1608(Pt-1))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(0.2 % proof stress - IS 1608(pt-1))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1(Elongation - IS 1608(Pt-1))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.3(Casting Defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.4(Hardness- IS 1500)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6(Hammer Test - IS1729)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(Leakage Test - IS 1729)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, a)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, b)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, c)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, d)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, e)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, f)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, g)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, h)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, i)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, j)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, k)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, l)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, m)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, n)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, p)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, q)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, r)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, r1)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, r2)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, s)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, t)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, A)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, B)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, C)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, D)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, E)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, F)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, G)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, H)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, Is)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, J)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, K)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, L)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, M)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, N)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2-Table 1 to 32(Dimension, P)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Coating Test at 65degree Celcius )	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Coating Test at 0degree Celcius)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

IS 1367 : Part 3 (2017)

Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision)

All Grade / Type / Size / Designation

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Material Testing)	-	2500	10% Discount to BIS And for others 1.5 times of mentioned testing charges.
7.0(Mechanical testing (Ys, TS, %EL, RA))	-	5000	10% Discount to BIS And for others 1.5 times of mentioned testing charges.
9.6(Proof Load test for finished bolts scrwes, and studs)	-	1500	10% Discount to BIS And for others 1.5 times of mentioned testing charges.
9.8(Head soundness test)	-	2500	10% Discount to BIS And for others 1.5 times of mentioned testing charges.
9.9(Hardness Test)	-	1500	10% Discount to BIS And for others 1.5 times of mentioned testing charges.
9.10(Decarburization test)	-	1500	10% Discount to BIS And for others 1.5 times of mentioned testing charges.
9.11(Carburization test)	-	1500	10% Discount to BIS And for others 1.5 times of mentioned testing charges.
9.12(Reducing of hardnes after retempering , Hv)	-	1500	10% Discount to BIS And for others 1.5 times of mentioned testing charges.
9.13(Torsional Test)	-	2500	10% Discount to BIS And for others 1.5 times of mentioned testing charges.
9.14(Impact Test)	-	1500	10% Discount to BIS And for others 1.5 times of mentioned testing charges.
9.15(Surface discounity)	-	1500	10% Discount to BIS And for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

IS 1795 (1982)

Specification for pillar taps for water supply purposes

All type of Grade / Type / Size / Designation

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"CLAUSE 4.1 Table 1 (i) (a)"(Cast brass)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"CLAUSE 4.1 Table 1 (i) (b)"(Leaded tin bronze)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"CLAUSE 4.1 Table 1 (ii) (a)"(Brass rod (extruded or rolled ))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"CLAUSE 4.1 Table 1 (ii) (b)"(Brass)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CLAUSE 4.2(material for washer)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CLAUSE 5(MANUFACTURE AND WORKMANSHIP)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CLAUSE 6.2(Body and Easy-Clean Cover)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CLAUSE 6.3(Bonnet and Gland)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CLAUSE 6.4(Capstan Head and Spindle)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CLAUSE 6.5(Washer Plate and Washer)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CLAUSE 6.6(Screw Threads)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CLAUSE 6.7(Anti-splash Device)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
CLAUSE 8(FINISH)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

IS 617 (1994)

Cast aluminium and its alloys - Ingots and castings for general engineering purposes - Specification (Third Revision)

All type of Grade / Type / Size / Designation

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
9(TOLERANCES ON DIMENSIONS OF CASTINGS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(FREEDOM FROM DEFECTS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6.2(Hardness)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6, Table 2.(MECHANICAL PROPERTIES OF CASTINGS)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5, Table 1.(Chemical Composition)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
17(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11()	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Pressure Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
17(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Pressure Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Pressure Test - IS 617)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Iron)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Magnesium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Tin)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Silicon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Nickel)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Zinc)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Other elements (each))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Other elements (Total))	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Aluminium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Titanium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Lead)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

IS 1284 (1975)

Specification for wrought aluminium alloy bolt and screw stock (for general engineering purposes) (Second Revision)

All type of Grade / Type / Size / Designation

9000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Freedom from defects)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1(Copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1(Magnesium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1(Silicon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1(Iron)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1(Manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1(Zinc)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1(Titanium and/or other grain refining elements)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 1(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 2(Diameter)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 2(0.2 percent proof stress)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
5.1 Table 2(Tensile strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6(Dimensions and tolerances)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.1(Tensile test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
8.2(Head-Forming test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

IS 737 (2008)

Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes - Specification (Fourth Revision)

All type of Grade / Type / Size / Designation

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Freedom from defects)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 Table-1(Al)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 Table-1(Cu)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 Table-1(Mg)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 Table-1(Si)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 Table-1(Fe)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 Table-1(Mn)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 Table-1(Zn)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 Table-1(Ti)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 Table-1(Cu+Si+Fe)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 Table-1(Cu+Si+Fe+Mn+Zn)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 Table-1(Cu+Mg+Si+Fe+Mn+Zn)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 Table-1(Zr)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 Table-1(Cr+Mn)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table-2(Tensile Strength)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table-2(Elongation)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table-2(0.2 % Proof Stress)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7 Table-2(Bend Test)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
9(Dimension - IS 2676)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
6 Table-1(Cr)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

IS 733 (1983)

Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4(Freedom from Defects)	-	200	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.1, Table 2(0.2 Percent proof stress- IS 1816)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.1, Table 2(Tensile Strength- IS 1816)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 5.1, Table 2(Elongation on 50 mm or 5.65√So Gauge Length)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 0.4, 5.1, Table 1(Copper- IS 504 or by any other suitable instrumental method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 0.4, 5.1, Table 1(Magnesium- IS 504 or by any other suitable instrumental method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 0.4, 5.1, Table 1(Silicon- IS 504 or by any other suitable instrumental method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 0.4, 5.1, Table 1(Iron- IS 504 or by any other suitable instrumental method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 0.4, 5.1, Table 1(Zinc- IS 504 or by any other suitable instrumental method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 0.4, 5.1, Table 1(Aluminium- IS 504 or by any other suitable instrumental method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 0.4, 5.1, Table 1(Titanium and / or other grain refining elements - IS 504 or by any other suitable instrumental method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 0.4, 5.1, Table 1(Chromium- IS 504 or by any other suitable instrumental method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 0.4, 5.1, Table 1(Ti+ V- IS 504 or by any other suitable instrumental method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 0.4, 5.1, Table 1(Total Impurities- IS 504 or by any other suitable instrumental method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Cl. 0.4, 5.1, Table 1(Cr+ Mn- IS 504 or by any other suitable instrumental method)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
7(Dimension - IS 3965)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Marking)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Copper)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Iron)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Magnesium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Manganese)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Titanium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Silicon)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Chromium)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Table-1, Clause - 5.1(Zinc)	-	500	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

IS 17875 (2022)

Stainless Steel seamless pipes and tubes for general service

All Grade / Type / Size / Designation

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0 (Table No.- 1)(Chemical Composition,% - IS 228)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.1 (Table No.- 4)(Tensile Test,Mpa - IS 1608)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
11(Transverse Tension Test,%)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12 (Table No.- 5)(Hardness Test,HRC,HRB&BHN- IS 1500 (Part 1) or IS 1586 (Part 1))	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
13 (Table No.- 7)(Flaring Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
14(Flattaning Test-IS 2328)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
17(Leak Tighteness Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
18("Corrosion Test-IS 10461 (Part 1) or IS 10461 (Part 2)")	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
19(Eddy current test & Air under water)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
21(Workmanship, Finish and Appearance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
22(Repair by Welding or Grinding)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
23 (Table No.- 9,10&11)(Dimensions and Tolerances,mm)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"Clause 8.1 and 8.2 - Table 1"(Carbon)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"Clause 8.1 and 8.2 - Table 1"(Silicon)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"Clause 8.1 and 8.2 - Table 1"(Mangnese)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"Clause 8.1 and 8.2 - Table 1"(Nickel)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"Clause 8.1 and 8.2 - Table 1"(Chromium)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"Clause 8.1 and 8.2 - Table 1"(Molybdenum)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"Clause 8.1 and 8.2 - Table 1"(Sulphur)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"Clause 8.1 and 8.2 - Table 1"(Phosphorous)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"Clause 8.1 and 8.2 - Table 1"(Nitrogen)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"Clause 8.1 and 8.2 - Table 1"(Copper)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"Clause 8.1 and 8.2 - Table 1"(Aluminium)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"Clause 8.1 and 8.2 - Table 1"(Titanium)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"Clause 8.1 and 8.2 - Table 1"(Niobium)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"Clause 18 IS 10461(Part 1)"(Corrosion Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 10.1 - Table 4(Tensile Strength)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 10.1 - Table 4(Percent Elongation)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 11(Transverse Tension Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 12(Hardness Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 13(Flaring Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 14(Flattening Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 17(Leak Tightness Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
"Clause 18 IS 10461(Part 2)"(Corrosion Test)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 21(Workmanship, Finish & Appearance)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
Clause 23 Annexure A, Table 9 Table 10(Dimensions & Tolerances)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
10.2(Hardness test IS 1500 (part-1):2019)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
12.2(Flaring test IS 17878:2022)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
16(Sampling)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.
24(Marking)	-	1000	10% Discount to BIS and for others 1.5 times of mentioned testing charges.

21 Aug, 2027

-
-

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

Delta Testing and Research Laboratories Private Limited (C5)

Plot No. C-5, Block - C, Main Kanjhawala Road, Rajiv Nagar, Delhi, North West, Delhi, 110086

9811037450 info@deltatestinglab.com

Scope List