BIS - LIMS (Laboratory Information Management System)

TATA STEEL

Scientific Services, Post Box: Burmamines, Jamshedpur, East Singhbum, Jharkhand, 831001

7763807268 souvik.das@tatasteel.com

Scope List

Reset

8 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 7283 (1992)

Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

6740 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 6(Workmanship)	-	0	-
Cl 7(Diameter & Out Of Round)	-	0	-
Cl 8(Decarburization)	-	2000	-
Cl 9(Inclusion)	-	2000	-
Cl 10(Hardenability)	-	2000	-
Cl 11(Size)	-	0	-
Cl 6(Workmanship)	-	0	-
Cl 7(Diameter & Out Of Round)	-	0	-
Cl 8(Decarburization)	-	2000	-
Cl 9(Inclusion)	-	2000	-
Cl 10(Hardenability)	-	2000	-
Cl 11(Size)	-	1740	-
Cl 6(Workmanship)	-	0	-
Cl 7(Diameter & Out Of Round)	-	0	-
Cl 8(Decarburization)	-	2000	-
Cl 9(Inclusion)	-	2000	-
Cl 10(Hardenability)	-	2000	-
Cl 11(Size)	-	0	-
Cl 6(Workmanship)	-	0	-
Cl 7(Diameter & Out Of Round)	-	0	-
Cl 8(Decarburization)	-	2000	-
Cl 9(Inclusion)	-	2000	-
Cl 10(Hardenability)	-	2000	-
Cl 11(Size)	-	0	-
Cl 6(Workmanship)	-	0	-
Cl 7(Diameter & Out Of Round)	-	0	-
Cl 8(Decarburization)	-	2000	-
Cl 9(Inclusion)	-	2000	-
Cl 10(Hardenability)	-	2000	-
Cl 11(Size)	-	0	-
Cl 6(Workmanship)	-	0	-
Cl 7(Diameter & Out Of Round)	-	0	-
Cl 8(Decarburization)	-	2000	-
Cl 9(Inclusion)	-	2000	-
Cl 10(Hardenability)	-	2000	-
Cl 11(Size)	-	0	-
Cl 5(Material Test)	-	0	-
5, 5.1, 5.2(Chemical Composition - Carbon)	-	4000	-
5, 5.1, 5.2(Chemical Composition - Sulphur)	-	4000	-
5, 5.1, 5.2(Chemical Composition - Phosphorus)	-	4000	-
5, 5.1, 5.2(Chemical Composition - Manganese)	-	4000	-
5, 5.1, 5.2(Chemical Composition - Silicon)	-	4000	-
5, 5.1, 5.2(Chemical Composition - Nickel)	-	4000	-
5, 5.1, 5.2(Copper)	-	4000	-
5, 5.1, 5.2(Chromium)	-	4000	-
5, 5.1, 5.2(Chemical Composition - Lead)	-	4000	-
5, 5.1, 5.2(Chemical Composition - Nitrogen)	-	4000	-
Cl 11(Size)	-	0	-
Cl 10(Hardenability)	-	2000	-
Cl 9(Inclusion)	-	2000	-
Cl 8(Decarburization)	-	2000	-
Cl 7(Diameter & Out Of Round)	-	0	-
Cl 6(Workmanship)	-	0	-
11(Grain Size)	-	2000	-
Cl 6(Workmanship)	-	0	-
7(Diameter & Out Of Round)	-	0	-
Cl 8(Decarburization)	-	2000	-
Cl 9(Inclusion)	-	2000	-
Cl 10(Hardenability)	-	2000	-
Cl 11(Size)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
14(Marking)	-	0	-
5(Material - IS 7283)	-	0	-
7.3(Dimensional Cutting -IS 7283)	-	0	-

Complete

26 Nov, 2024

25 Nov, 2027

-
-

IS 2830 (2012)

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision)

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9(Workmanship)	-	0	-
Cl 10.1(Workmanship)	-	0	-
Cl 10.2(Workmanship)	-	0	-
Cl 10.2(Press)	-	2000	-
Cl 10.3(Workmanship)	-	0	-
Cl 11(Length, Width & Thickness)	-	2000	-
Cl 9(Workmanship)	-	0	-
Cl 10.1.a)(Workmanship)	-	0	-
Cl 10.1.b)(Workmanship)	-	0	-
Cl 10.2(Press)	-	2000	-
Cl 10.3(Workmanship)	-	0	-
Cl 11(Length, Width & Thickness)	-	2000	-
Cl 9(Workmanship)	-	0	-
Cl 10.1(Workmanship)	-	0	-
Cl 10.2(Workmanship)	-	0	-
Cl 10.2(Press)	-	2000	-
Cl 10.3(Workmanship)	-	0	-
Cl 11(Length)	-	2000	-
6.1(Carbon %)	-	4000	-
6.1(Manganese %)	-	4000	-
6.1(Phosphorus %)	-	4000	-
6.1(Sulphur %)	-	4000	-
6.1(Silicon %)	-	4000	-
6.1( Copper %)	-	4000	-
6.1( Aluminium %)	-	4000	-
6.1( Nb)	-	4000	-
6.1(V)	-	4000	-
6.1( Ti)	-	4000	-
6.1(Cr)	-	4000	-
6.1(Mo)	-	4000	-
6.1(Ni)	-	4000	-
6.1( Nitrogen%)	-	4000	-
6.1(Carbon %)	-	4000	-
6.1(Manganese %)	-	4000	-
6.1(Phosphorus %)	-	4000	-
6.1(Sulphur %)	-	4000	-
6.1(Silicon %)	-	4000	-
6.1( Copper %)	-	4000	-
6.1( Aluminium %)	-	4000	-
6.1( Nb)	-	4000	-
6.1(V)	-	4000	-
6.1( Ti)	-	4000	-
6.1(Cr)	-	4000	-
6.1(Mo)	-	4000	-
6.1(Ni)	-	4000	-
6.1( Nitrogen%)	-	4000	-
6.1(Carbon %)	-	4000	-
6.1(Manganese %)	-	4000	-
6.1(Phosphorus %)	-	4000	-
6.1(Sulphur %)	-	4000	-
6.1(Silicon %)	-	4000	-
6.1( Copper %)	-	4000	-
6.1( Aluminium %)	-	4000	-
6.1( Nb)	-	4000	-
6.1(V)	-	4000	-
6.1( Ti)	-	4000	-
6.1(Cr)	-	4000	-
6.1(Mo)	-	4000	-
6.1(Ni)	-	4000	-
6.1(Nitrogen%)	-	4000	-
11(Thickness)	-	2000	-
11(Width)	-	2000	-
10.1 (a)(Macro-examination)	-	2000	-
10.1 (b)(Sulphur print)	-	2000	-
Clause 6.1(IS 2830 : 2012)	-	2000	-
Cl. 10.1 (b)(Sulphur Print)	-	2000	-
Cl. 11.2(Out of Squareness)	-	2000	-
Cl. 10.3(Camber)	-	2000	-
Cl. 10.2(Bend)	-	2000	-
Cl. 10.1 (a)(Macro Examination)	-	2000	-
Clause 10.3(Camber)	-	2000	-
Clause 10.2(Bend)	-	2000	-
Cl 11(Length, Width & Thickness)	-	2000	-
Cl 10.3(Workmanship)	-	0	-
Cl 10.2(Press)	-	2000	-
Cl 10.2(Workmanship)	-	2000	-
Cl 10.1(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 9(Workmanship)	-	0	-
Cl 10.1(Workmanship)	-	0	-
Cl 10.2(Workmanship)	-	0	-
Cl 10.2(Press)	-	2000	-
Cl 10.3(Workmanship)	-	2000	-
Cl 11(Length, Width & Thickness)	-	2000	-
Clause 6, Table 1 Note : 1(By Calculation)	-	4000	-
Clause 6, Table 1 Note : 3(By Calculation)	-	4000	-
6(Carbon as C - IS:228)	-	4000	-
6(Manganese as Mn-IS:228)	-	4000	-
6(Sulphur as S- IS:228)	-	4000	-
6(carbon equivalent (CE))	-	4000	-
6(Micro alloying elements)	-	4000	-
6(Sulphur + Phosphorus)	-	4000	-
6(Copper as Cu)	-	4000	-
10 (a)(Macro Examination-IS:11371)	-	2000	-
10 (b)(Sulphur Print Test - IS:12037)	-	2000	-
8(Selection of Test samples)	-	4000	-
12(Tolerance - IS 2830)	-	4000	-
13(Marking)	-	4000	-
Clause 6, Table 1 Note : 1(Carbon Equivalent)	-	4000	-
Clause 6, Table 1 Note : 3(Nb+V+Ti)	-	4000	-
Clause 6, Table 1 Note : 9(S+P)	-	4000	-
Clause 9(Freedom from Defect)	-	2000	-
4(Supply of material)	-	2000	-
5(Manufacture)	-	2000	-
6.1(Chemical method)	-	4000	-
6.2(Copper bearing quality)	-	4000	-
6.3(Check Analysis)	-	4000	-
10.1(Test)	-	2000	-
10.2(Bend)	-	2000	-
10.3(Chamber)	-	2000	-
11(Dimensions)	-	2000	-
12(Tolrences)	-	2000	-
13(Marking)	-	2000	-

Complete

26 Nov, 2024

25 Nov, 2027

-
-

IS 7887 (1992)

Mild steel wire rod for general engineering purposes - Specification (First Revision)

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	0	-
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	-
Cl 8(Workmanship)	-	0	-
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	-
Cl 8(Freedom from defects)	-	1000	-
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	-
6.1(Carbon %)	-	4000	-
6.1(Manganese %)	-	4000	-
6.1(Phosphorus %)	-	4000	-
6.1(Sulphur %)	-	4000	-
6.1(Silicon %)	-	4000	-
6.1( Aluminium %)	-	4000	-
6.1(Carbon %)	-	4000	-
6.1(Manganese %)	-	4000	-
6.1(Phosphorus %)	-	4000	-
6.1(Sulphur %)	-	4000	-
6.1(Silicon %)	-	4000	-
6.1( Aluminium %)	-	4000	-
6.1(Carbon %)	-	4000	-
6.1(Manganese %)	-	4000	-
6.1(Phosphorus %)	-	4000	-
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	4000	-
Amendment 1(Titanium)	-	4000	-
Amendment 1(Vanadium)	-	4000	-
Amendment 1(Niobium)	-	4000	-
6.1(Sulphur %)	-	4000	-
6.1(Silicon %)	-	4000	-
6.1( Aluminium %)	-	4000	-
Cl. 9(Out of Shape)	-	0	-
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	-
Cl 8(Workmanship)	-	0	-
Cl 8(Workmanship)	-	0	-
Cl 9(Nominal Diameter & Out Of Shape)	-	1000	-
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	4000	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	4000	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	4000	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	4000	-
Amendment 1(By Calculation)	-	4000	-
Table 1 Note 3(Any Instrumental Method/Chemical Method)	-	4000	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	4000	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	4000	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	4000	-
Amendment 1(Any Instrumental Method/Chemical Method)	-	4000	-
Amendment 1(By Calculation)	-	4000	-
Table 1 Note 3(Copper)	-	4000	-
Amendment 1(Niobium)	-	4000	-
Amendment 1(Vanadium)	-	4000	-
Amendment 1(Titanium)	-	4000	-
Amendment 1(Micro Alloying Element (Nb+V+Ti))	-	4000	-
9.1(Diameter - SOP-MT-23)	-	1000	-
9.3(Out of Shape - SOP-MT-23)	-	1000	-
11(Marking)	-	0	-
Table 1 Note 3(Copper)	-	4000	-

Complete

26 Nov, 2024

25 Nov, 2027

-
-

IS 2879 (1998)

Mild steel for metal arc welding electrodes - Specification (Third Revision)

3960 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7(Workmanship)	-	0	-
Cl 8 & 9(Diameter)	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 8 & 9(Diameter)	-	960	-
Cl 7(Workmanship)	-	0	-
Cl 8 & 9(Diameter)	-	960	-
6(Carbon %)	-	3000	-
6(Manganese %)	-	3000	-
6(Phosphorus %)	-	3000	-
6(Sulphur %)	-	3000	-
6(Silicon %)	-	3000	-
9.2 (b)(Diameter Difference)	-	960	-
9.2 (a)(Width Across Flat)	-	960	-
Cl 8 & 9(Diameter)	-	960	-
Cl 7(Workmanship)	-	0	-
Cl 7(Workmanship)	-	0	-
Cl 8 & 9(Diameter)	-	960	-
Cl. 5.2(Macro Examination)	-	960	-
Cl. 8,9(Length)	-	960	-
Cl. 8,9(Width across flat)	-	960	-
Cl. 9.2(Maximum Difference between 2 readings taken at any 2 diameters across cross section)	-	960	-
6(Cr+ Mo+ Ni)	-	3000	-
6(Ni)	-	3000	-
6(Mo)	-	3000	-
6(Cr)	-	3000	-
6( Ti)	-	3000	-
6(V)	-	3000	-
6( Nb)	-	3000	-
6( Aluminium %)	-	3000	-
6( Copper %)	-	3000	-
6(Silicon %)	-	3000	-
6(Sulphur %)	-	3000	-
6(Phosphorus %)	-	3000	-
6(Manganese %)	-	3000	-
6(Carbon %)	-	3000	-
6(Cr+ Mo+ Ni)	-	3000	-
6(Ni)	-	3000	-
6(Mo)	-	3000	-
6(Cr)	-	3000	-
6( Ti)	-	3000	-
6(V)	-	3000	-
6( Nb)	-	3000	-
6( Aluminium %)	-	3000	-
6( Copper %)	-	3000	-
6(Silicon %)	-	3000	-
6(Sulphur %)	-	3000	-
6( Copper %)	-	3000	-
6(Phosphorus %)	-	3000	-
6( Aluminium %)	-	3000	-
6( Nb)	-	3000	-
6(V)	-	3000	-
6( Ti)	-	3000	-
6(Cr)	-	3000	-
6(Manganese %)	-	3000	-
6(Carbon %)	-	3000	-
6(Cr+ Mo+ Ni)	-	3000	-
6(Ni)	-	3000	-
6(Mo)	-	3000	-

Complete

26 Nov, 2024

25 Nov, 2027

-
-

IS 14650 (2023)

UNALLOYED AND ALLOYED STEEL INGOT AND SEMI-FINISHED PRODUCTS FOR RE-ROLLING PURPOSES - SPECIFICATION (First Revision)

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause - 7.1(CARBON)	-	4000	-
Clause - 7.1(SULPHUR)	-	4000	-
Clause - 7.1(PHOSPHURS)	-	4000	-
Clause - 7.1(MANGANESE)	-	4000	-
Clause - 7.1(NITROGEN)	-	4000	-
As per Clause 10(Dimension)	-	2000	-
As per Clause 10.1(Dimension Width)	-	2000	-
As per Clause 10.1(Dimension Thickness)	-	2000	-
As per Clause 10.2(Dimension Length)	-	2000	-
As per Clause 11/11.1/11.2/11.3/11.4(Tolerances)	-	2000	-
As per Clause 11.5(Bend)	-	2000	-
As per Clause 11.6(Camber)	-	2000	-
As per Clause 11.7 (i)(Out of Square)	-	2000	-
As per Clause 11.7 (ii)(Round Corners)	-	2000	-
As per Clause 11.7 (iii)(Ridges due to gas cutting)	-	2000	-
As per Clause 11.7 (iv)(Taper (Width variation on top and bottom surface at one location)	-	2000	-
As per Clause 11.7 (v)(Edge slanting (Width variation on top and bottom surface at one location)	-	2000	-
As per Clause 11.7 (vi)(Convexity(Difference in thickness from edge to curve)	-	2000	-
As per Clause 11.7 (vii)(Chamfering (Length variation on top and bottom surface at one location)	-	2000	-
As per Clause 11.7 (viii)(Wedge (Thickness variation at the edges along the cross section)	-	2000	-
As per Clause 11.7 (ix)(Scarfing pits)	-	2000	-
As per Clause 12/12.1/12.2/12.3(Freedom from defects)	-	2000	-
Clause. 13(Macro examination test.)	-	2000	-
Clause. 13(Macro examination test.)	-	2000	-
Clause. 13(Sulphur print.)	-	2000	-
Clause. 13(Inclusion content)	-	2000	-
Clause. 14(Marking)	-	2000	-
Clause.15(Ordering information)	-	2000	-
Clause.6.0(Manufacture)	-	2000	-
Clause.7.1(Silicon)	-	4000	-
Clause.7.1(Carbon Equbalant)	-	4000	-
Clause.7.1(Microalloy element)	-	4000	-

Complete

26 Nov, 2024

25 Nov, 2027

-
-

IS 7904 (2018)

High carbon steel wire rods - Specification (Second Revision)

10460 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table-1,(Clauses 5.1 and 7.2)(S+P)	-	4000	-
Table-1,(Clauses 5.1 and 7.2)(Nitrogen)	-	4000	-
Table-1,(Clauses 5.1 and 7.2)(Titanium)	-	4000	-
Table-1,(Clauses 5.1 and 7.2)(Vanadium)	-	4000	-
Table-1,(Clauses 5.1 and 7.2)(Boron)	-	4000	-
Table-1,(Clauses 5.1 and 7.2)(Copper)	-	4000	-
Table-1,(Clauses 5.1 and 7.2)(Molybdenum)	-	4000	-
Table-1,(Clauses 5.1 and 7.2)(Chromium)	-	4000	-
Table-1,(Clauses 5.1 and 7.2)(Aluminium)	-	4000	-
Table-1,(Clauses 5.1 and 7.2)(Silicon)	-	4000	-
Table-1,(Clauses 5.1 and 7.2)(Manganese)	-	4000	-
Table-1,(Clauses 5.1 and 7.2)(Phosphorous)	-	4000	-
Table-1,(Clauses 5.1 and 7.2)(Sulphor)	-	4000	-
Table-1,(Clauses 5.1 and 7.2)(Carbon)	-	4000	-
Cl 9 (Dimensions & tolerances)()	-	2460	-
9(Dimesion (Diameter))	-	2460	-
9(Dimesion (Out of Roundness))	-	2460	-
10(Mechanical Properties (Tensile strength))	-	4000	-
10(Mechanical Properties (Reduction in Area))	-	4000	-
12(Surface Defects)	-	2460	-
13(Decarburization Test)	-	2460	-
14(Non-metallic Inclusions (Type A (Sulphide Type) (Thin, worse))	-	2460	-
14(Type B (Alumina Type) (Thin, worse))	-	2460	-
14(Type C (Silicate Type) (Thin, worse))	-	2460	-
14(Type D( Globular Oxide Type ) (Thin, worse))	-	2460	-
14(Non-metallic Inclusions (Type A (Sulphide Type) (Thin, Mean))	-	2460	-
14(Type B (Alumina Type) (Thin, Mean))	-	2460	-
14(Type C (Silicate Type) (Thin, Mean))	-	2460	-
14(Type D( Globular Oxide Type ) (Thin, Mean))	-	2460	-
14(Non-metallic Inclusions (Type A (Sulphide Type) (Thick, worse))	-	2460	-
14(Type B (Alumina Type) (Thick, worse))	-	2460	-
14(Type C (Silicate Type) (Thick, worse))	-	2460	-
14(Type D( Globular Oxide Type ) (Thick, worse))	-	2460	-
14(Non-metallic Inclusions (Type A (Sulphide Type) (Thick, Mean))	-	2460	-
14(Type B (Alumina Type) (Thick, Mean))	-	2460	-
14(Type C (Silicate Type) (Thick, Mean))	-	2460	-
14(Type D( Globular Oxide Type ) (Thick, Mean))	-	2460	-
15(Microstructure)	-	2460	-
16(Axial Segregation (Optional))	-	2460	-
TABLE 1 NOTE 1(Any Validated test method)	-	0	-
TABLE 1 NOTE 1(By Calculation)	-	0	-
TABLE 1 NOTE 6()	-	0	-
TABLE 1 NOTE 1(Any Validated test method)	-	0	-
TABLE 1 NOTE 1(By Calculation)	-	0	-
TABLE 1 NOTE 6(Tramp Element (Cr+ Ni+ Mo+ Cu))	-	4000	-
TABLE 1 NOTE 1(Any Validated test method)	-	4000	-
TABLE 1 NOTE 1(By Calculation)	-	4000	-
TABLE 1 NOTE 6()	-	4000	-
TABLE 1 NOTE 1(Niobium)	-	4000	-
TABLE 1 NOTE 1(Micro Alloy Element (Nb+V+Ti))	-	4000	-
TABLE 1 NOTE 6(Tramp Element (Cr+ Ni+ Mo+ Cu))	-	4000	-
TABLE 1 NOTE 6(Tramp Element (Cr+ Ni+ Mo+ Cu))	-	4000	-
Table-1,(Clauses 5.1 and 7.2)(Nickel)	-	4000	-

Complete

26 Nov, 2024

25 Nov, 2027

-
-

IS 11513 (2017)

Hot rolled carbon steel strip for cold rolling purposes - Specification (Second Revision)

4400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Workmanship)	-	0	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	400	-
Cl 8(Workmanship)	-	0	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	400	-
Cl 8(Workmanship)	-	0	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	400	-
6.1(Carbon %)	-	4000	-
6.1(Manganese %)	-	4000	-
6.1(Phosphorus %)	-	4000	-
6.1(Sulphur %)	-	4000	-
6.1(Silicon %)	-	4000	-
6.1( Copper %)	-	4000	-
6.1( Aluminium %)	-	4000	-
6.1( Nb)	-	4000	-
6.1(V)	-	4000	-
6.1( Ti)	-	4000	-
6.1(Boron)	-	4000	-
6.1( Nitrogen%)	-	4000	-
6.1(Microalloying)	-	4000	-
6.1(Carbon %)	-	4000	-
6.1(Manganese %)	-	4000	-
6.1(Phosphorus %)	-	4000	-
6.1(Sulphur %)	-	4000	-
6.1(Silicon %)	-	4000	-
6.1( Copper %)	-	4000	-
6.1( Aluminium %)	-	4000	-
6.1( Nb)	-	4000	-
6.1(V)	-	4000	-
6.1( Ti)	-	4000	-
6.1(Boron)	-	4000	-
12(Marking)	-	0	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width)	-	400	-
Cl 8(Workmanship)	-	0	-
Cl 8(Workmanship)	-	0	-
Cl 9(Length, Width, Thickness, Crown, Edge Camber & Difference in Thickness Across Width )	-	400	-
Cl.9(Width)	-	0	-
Cl.9(Thickness)	-	0	-
Cl. 9.5(Edge Camber)	-	0	-
Cl.9.3.1(Difference in Thickness)	-	0	-
Cl. 9.3(Crown)	-	0	-
Cl. 10(Weight)	-	0	-
6.1(Microalloying)	-	4000	-
6.1( Nitrogen%)	-	4000	-
6.1(Boron)	-	4000	-
6.1( Ti)	-	4000	-
6.1(V)	-	4000	-
6.1( Nb)	-	4000	-
6.1( Nitrogen%)	-	4000	-
6.1(Microalloying)	-	4000	-
6.1(Carbon %)	-	4000	-
6.1(Manganese %)	-	4000	-
6.1(Phosphorus %)	-	4000	-
6.1(Sulphur %)	-	4000	-
6.1(Silicon %)	-	4000	-
6.1( Copper %)	-	4000	-
6.1( Aluminium %)	-	4000	-

Complete

26 Nov, 2024

25 Nov, 2027

-
-

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Fe 600/Rebar/ 45 mm

10460 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 9.4(Load In Other Direction From Bend)	-	4000	-
Cl 9.3(Load In One Direction)	-	4000	-
Cl 8.1(UTM)	-	4000	-
Cl 7.2(Weight)	-	4000	-
Cl 6.1(Length, Width & Thickness)	-	2460	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
Cl 9.4(Load In Other Direction From Bend)	-	4000	-
Cl 9.3(Load In One Direction)	-	4000	-
Cl 8.1(UTM)	-	4000	-
Cl 7.2(Weight)	-	4000	-
Cl 6.1(Length, Width & Thickness)	-	2460	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
Cl 9.4(Load In Other Direction From Bend)	-	4000	-
Cl 9.3(Load In One Direction)	-	4000	-
Cl 8.1(UTM)	-	4000	-
Cl 7.2(Weight)	-	4000	-
Cl 6.1(Length, Width & Thickness)	-	2460	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	4000	-
4.1(Sulphur and phosphorous)	-	4000	-
4.1(CE)	-	4000	-
4.1( Nitrogen%)	-	4000	-
4.1(Ni)	-	4000	-
4.1(Mo)	-	4000	-
4.1(Cr)	-	4000	-
4.1( Ti)	-	4000	-
4.1(V)	-	4000	-
4.1( Nb)	-	4000	-
4.1( Aluminium %)	-	4000	-
4.1( Copper %)	-	4000	-
4.1(Silicon %)	-	4000	-
4.1(Sulphur %)	-	4000	-
4.1(Phosphorus %)	-	4000	-
4.1(Manganese %)	-	4000	-
4.1(Carbon %)	-	4000	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	4000	-
Cl. 9.3, Table 4(Bend Test )	-	4000	-
Cl. 8.1 Table 3(Elongation, percentage)	-	4000	-
Cl. 8.1 Table 3(TS/YS ratio)	-	4000	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	4000	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	4000	-
Cl. 7.2 Table -2 (Nominal Mass)	-	4000	-
Cl. 6.1(Nominal Size)	-	4000	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	4000	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	4000	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	4000	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	4000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	4000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	4000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	4000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	4000	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	4000	-
8.18.1 Table 3(Total elongation at maximum force)	-	4000	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
4.2(Niobium (Nb))	-	4000	-
4.2(Boron (B))	-	4000	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	4000	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	4000	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	4000	-
Cl. 8.1 Table 3(Maximum Extension)	-	4000	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	4000	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	4000	-
Cl. 4.3(Visual Inspection.)	-	2460	-
Cl. 5.2(Surface Characteristics)	-	2460	-
Clause 9.4(Rebend Test)	-	4000	-
Clause 6.3(Effective Cross-sectional Area)	-	4000	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	4000	-
Cl 9.4(Load In Other Direction From Bend)	-	4000	-
Cl 9.3(Load In One Direction)	-	4000	-
Cl 8.1(UTM)	-	4000	-
Cl 7.2(Weight)	-	4000	-
Cl 6.1(Length, Width & Thickness)	-	2460	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
Cl 5(Deformations and Surface Characteristics)	-	2460	-
Cl 6.1(Length, Width & Thickness)	-	2460	-
Cl 7.2(Weight)	-	4000	-
Cl 8.1(UTM)	-	4000	-
Cl 9.3(Load In One Direction)	-	4000	-
Cl 9.4(Load In Other Direction From Bend)	-	4000	-
13(Identification and marking)	-	4000	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	2460	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	4000	-
4.3(Rolling and cold working of bars/wire)	-	0	-
7.1(Specified length)	-	4000	-
9.1(Preparation of test sample)	-	2460	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	4000	-
9.5(Retest)	-	4000	-
12(Inspection)	-	2460	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	4000	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	4000	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	4000	-
1()	-	0	-

Complete

26 Nov, 2024

25 Nov, 2027

-
Exclusion: Cl.5.7 (Pull Out (Bond Test))

Bureau of Indian Standards

The National Standards Body of India

TATA STEEL

Scientific Services, Post Box: Burmamines, Jamshedpur, East Singhbum, Jharkhand, 831001

7763807268 souvik.das@tatasteel.com

Scope List