BIS - LIMS (Laboratory Information Management System)

Research & Development Centre for Bicycle and Sewing Machine, Ludhiana

B 38-39, Phase-V, Focal Point,, Ludhiana, Ludhiana, Punjab, 141010

8054303051 bsmcrd@gmail.com

Scope List

Reset

17 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 15449 (Part-1) (2024)

Household Zig-Zag Sewing Machine/Head Part 1 General Requirements

10000 View breakup
-

Clause No.	Exclusion	Remark
Cl-3.1(Design)	-	-
Cl-3.2(Reverse Stitch Mechanism)	-	-
Cl-3.2.1(Stitch Length Regulator/Controller)	-	-
Cl-3.3(Thread Tension and Releasing)	-	-
Cl-3.4(Timing)	-	-
Cl-3.5(Stop Motion Mechanism)	-	-
Cl-3.6(Bobbin Winder)	-	-
Cl-3.7(Spool Pin)	-	-
Cl-3.8(Stitch Width Selector)	-	-
Cl-3.9(Needle Position Selector)	-	-
Cl-5(Lubrication)	-	-
Cl-6(Workmanship and finish)	-	-
Cl-6.2(Painting and Powder Coating)	-	-
Cl-6.4(Nickel and chromium plated)	-	-
Cl-6.4(zinc electroplating)	-	-
Cl-6.7(Plastic Parts)	-	-
Cl-8.1(Accuracy Requirements)	-	-
Cl-8.3(Durability Requirements)	-	-
Cl-8.4(Safety Requirements)	-	-
Cl-8.5(Plug and Socket Requirements)	-	-
Cl-8.6(Power Cord Requirements)	-	-
Cl-9(Accessories in service box)	-	-
Cl-10(Marking)	-	-
Cl-3.1(Design)	-	-
Cl-3.2(Reverse Stitch Mechanism)	-	-
Cl-3.3(Thread Tension and Releasing)	-	-
Cl-3.4(Timing)	-	-
Cl-3.5(Stop Motion Mechanism)	-	-
Cl-3.6(Bobbin Winder)	-	-
Cl-3.7(Spool Pin)	-	-
Cl-3.8(Stitch Width Selector)	-	-
Cl-3.9(Needle Position Selector)	-	-
Cl-5(Lubrication)	-	-
Cl-6(Construction, workmanship and Finish)	-	-
Cl-6.2(Painting and Powder Coating)	-	-
Cl-6.3(Silk screening/pad printing/stickering)	-	-
Cl-6.4(Nickel and chromium plated)	-	-
Cl-6.7(Plastic Parts)	-	-
Cl-8.1(Accuracy Requirements)	-	-
Cl-8.2(Sewing Requirements)	-	-
Cl-8.3(Durability Requirements)	-	-
Cl-8.4(Safety Requirements)	-	-
Cl-8.2(Sewing Requirements)	-	-
Cl-10(Marking)	-	-
Cl-6.4(Zinc electroplating)	-	-

31 Dec, 2026

-
Included w.e.f 06.06.2025 Exclusion: Cl-8.4 (Safety Requirements), Cl-8.5 (Plug and Socket Requirements), Cl-8.6 (Power Cord Requirements)

IS/ISO 6742 : PART 2 (2015)

Cycles - Lighting and retro - Reflective devices: Part 2 retro - Reflective devices (First Revision)

32000 View breakup
Rs.32000/- + GST @18% per type (No. of per type samples required = 08 pcs)

Clause No.	Exclusion	Remark
5.1 -Tables 4, 5, 6, 7, 8, 9 or 10(Reflectors-CIL value)	-	+ GST@18% For one type of one set (6 nos.) of Reflectors
6-Table 15( Colorimetric requirements)	-	--
7.1.2.2(Reflectors-Temperature resistance test)	-	--
7.1.2.3(Reflectors- Impact test (except for conventional reflector of Group A))	-	--
7.1.2.4(Reflectors-Moisture resistance test)	-	--

31 Dec, 2026

-
Excluding : Cl.7.2.1(Retro-reflecting tyres form & location, Cl. 7.3.1 (Retro spokes or spoke cases- construction), Cl.8.3 & Cl.8.4

IS 15511 (2004)

Cycle chains - Characteristics and test methods

11000 View breakup
-

Clause No.	Exclusion	Remark
4.1(Designation)	-	-
4.2(Dimensions)	-	-
4.3(Tensile Testing )	-	-
4.4(Push-out force )	-	-
4.5(Pre-loading)	-	-
4.6(Length accuracy)	-	-
4.7(Marking )	-	-
5.1(Visual detection of twist )	-	-
5.2(Method of measuring twist )	-	-
6.1(Visual detection of lateral deviation)	-	-
6.2(Method of determining lateral deviation )	-	-
7(Detection of a stiff link )	-	-
8(Determination of side bow )	-	-
4.1(Designation)	-	-
4.2(Dimensions)	-	-
4.3(Tensile Testing )	-	-
4.4(Push-out force )	-	-
4.5(Pre-loading)	-	-
4.6(Length accuracy)	-	-
4.7(Marking )	-	-
5.1(Visual detection of twist )	-	-
5.2(Method of measuring twist )	-	-
6.1(Visual detection of lateral deviation)	-	-
6.2(Method of determining lateral deviation )	-	-
7(Detection of a stiff link )	-	-
8(Determination of side bow )	-	-
4.1(Designation)	-	-
4.2(Dimensions)	-	-
4.3(Tensile Testing )	-	-
4.4(Push-out force )	-	-
4.5(Pre-loading)	-	-
4.6(Length accuracy)	-	-
4.7(Marking )	-	-
5.1(Visual detection of twist )	-	-
5.2(Method of measuring twist )	-	-
6.1(Visual detection of lateral deviation)	-	-
6.2(Method of determining lateral deviation )	-	-
7(Detection of a stiff link )	-	-
8(Determination of side bow )	-	-
4.1(Designation)	-	-
4.2(Dimensions)	-	-
4.3(Tensile Testing )	-	-
4.5(Pre-loading)	-	-
4.6(Length accuracy)	-	-
4.7(Marking )	-	-
5.1(Visual detection of twist )	-	-
5.2(Method of measuring twist )	-	-
6.1(Visual detection of lateral deviation)	-	-
6.2(Method of determining lateral deviation )	-	-
7(Detection of a stiff link )	-	-
8(Determination of side bow )	-	-
4.4(Push-out force )	-	-

31 Dec, 2026

-
Included w.e.f 27.01.2026

IS 15449 : Part 2 (2004)

Household zig - Zag sewing machine head: Part 2 accuracy requirements

- View breakup
Rs.10000/- + GST

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
Rs.10000/- is testing charge for entire IS 15449 (Pt-1 to Pt-4)

IS 15449 : Part 3 (2004)

Household zig - Zag sewing machine head: Part 3 sewing requirements

- View breakup
Rs.10000/- + GST

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
Rs.10000/- is testing charge for entire IS 15449 (Pt-1 to Pt-4)

IS 15449 : Part 4 (2004)

Household zig - Zag sewing machine head: Part 4 durability requirements

- View breakup
Rs.10000/- + GST

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
Rs.10000/- is testing charge for entire IS 15449 (Pt-1 to Pt-4)

IS 10613 (2014)

Cycles - Safety requirements for bicycles (Second Revision)

199000 View breakup
Rs.1,99,000/-, Rs.4900/- (Optional) + GST @18%

Clause No.	Exclusion	Remark
4.2.1(Braking Systems)	-	+ Rs. 4900(optional)
4.2.2.2(Brake lever dimensions)	-	-
4.2.5.1(Braking under dry conditions)	-	-
4.2.5.2(Braking under wet conditions)	-	-
4.3.3(Expander Bolt for Handlebar Stem)	-	-
4.3.6(Fatigue Test on Handlebar and Stem Assembly)	-	-
4.4.1(Impact Test (Falling Mass))	-	-
4.4.2(Impact Test (Falling Frame-Fork Assembly))	-	-
4.5.2(Fatigue Strength of Fork)	-	-
4.6.3(Static Load Test)	-	-
4.8.2.1(Pedal Clearance, Ground clearance)	-	-
4.8.2.2(Toe clearance)	-	-
4.8.3(Drive System Static Load Test)	-	-
4.8.4(Pedal Dynamic Durability Test)	-	-
4.8.5(Fatigue Test on Crank Assembly)	-	-
4.9.6(Fatigue Test on Saddle Pillar)	-	-
4.14.1(Rear Reflectors)	-	-
4.14.2(Side Reflectors)	-	-
4.14.3(Front Reflectors)	-	-
4.14.4(Pedal Reflectors)	-	-
5.1(Road Test)	-	-

31 Dec, 2026

-
INCLUDED W.E.F. 31-08-2020

IS 15449 : Part 1 (2004)

Household zig - Zag sewing machine head: Part 1 general requirements

10000 View breakup
Rs.10000/- + GST

Clause No.	Exclusion	Remark
3.8(Stitch Width Selector)	-	+ GST@18%
6.2(Painting)	-	--
8.1(Accuracy Requirements)	-	--
8.2(Sewing Requirements)	-	--
8.3(Durability Requirements)	-	--

31 Dec, 2026

-
Rs.10000/- is testing charge for entire IS 15449 (Pt-1 to Pt-4)

IS 1875 (1992)

Carbon steel billets, blooms, slabs and bars for forgings - Specification (Fifth Revision)

15000 View breakup
Rs.14700/- + GST

Clause No.	Exclusion	Remark
Cl 8(Diameter, Ovality & Weight)	-	--
Cl 9(UTM & HBW)	-	--
Cl 12(Supplementary Requirements)	-	--

31 Dec, 2026

-
0.0

IS 12109 (1987)

General requirements for light duty sewing machine heads for industrial use

10000 View breakup
-

Clause No.	Exclusion	Remark
6.1(Accuracy Requirement)	-	+ GST@18%
6.2 Table 1(Accuracy Requirement Needle Bar - Measuring Condition - Needle bar at lowermost position)	-	--
6.2 Table 1(Accuracy Requirement Thread takeup lever - Measuring Condition - Thread take up lever at top and intermediate position of motion)	-	--
6.2 Table 1(Accuracy Requirement Rotating hook- Measuring Condition - With bobbin-case removed, play of rotating hook bobbin case holder )	-	--
6.2 Table 1(Accuracy Requirement Feed machanlsm- Measuring Condition - Feed dog at the highest position above the needle plate )	-	--
8 Table 2(Sewing Requirement)	-	--

31 Dec, 2026

-
-

IS 1610 (2018)

Household sewing machines - General requirements (Fourth Revision)

10000 View breakup
Rs.10,000/- + GST

Clause No.	Exclusion	Remark
4.1(Sewing Mechanism Design )	-	+ GST@18%
8(WORKMANSHIP AND FINISH)	-	--
10.1 IS 7491 (Accuracy Requirement Functional Dimension Feed Dog Measuring Condition - Feed dog raised to its highest position )	-	--
10.1 IS 7491 (Accuracy Requirement Functional Dimension Shuttle and shuttle driver Measuring Condition - Shuttle heel at bottom - most position)	-	--
10.1 IS 7491 (Accuracy Requirement Functional Dimension Presser foot Measuring Condition - Presser foot in lifted condition)	-	--
10.2 IS 7492 (Sewing Requirement)	-	--
10.3 IS 7493 (Durability Requirement Needle bar Measuring Condition - Needle bar at lower-most condition)	-	--

31 Dec, 2026

-
0.0

IS 2061 (1995)

Bicycle - Front forks - Specification (First Revision)

12000 View breakup
Rs.12000/- + GST

Clause No.	Exclusion	Remark
3(Material)	-	+ GST@18%
4(Dimensions)	-	--
5(. Manufacturer&Finish)	-	--
7.1.1( i) Load test )	-	--
7.1.2(ii) Expansion Tes )	-	--
7.1.3(iii) Tests for Finish)	-	--
7.1.4(iv) Impact Test)	-	--

31 Dec, 2026

-
0.0

IS 2414 (2005)

Cycle and rickshaw pneumatic tyres - Specification (Fourth Revision)

14700 View breakup
Rs.14700/- + GST

Clause No.	Exclusion	Remark
5.1 & 5.2(Dimensions)	-	+ GST@18%
6.2(Tyre Cord)	-	--
6.3(Tyre Casing Strength)	-	--
6.4(Bead Wire Joint)	-	--
6.5(Requirements of Ruber Compound)	-	--
6.6(Adhesion test)	-	--
6.7(Performance test)	-	--

31 Dec, 2026

-
0.0

IS 2403 (2014)

Short - Pitch transmission precision roller and bush chains, attachments and associated chain sprockets (Third Revision)

4500 View breakup
Rs.4,500/- + GST

Clause No.	Exclusion	Remark
3.3 Table-1,2(Dimensions- Pitch- p)	-	+ GST@18%
3.3 Table-1,2(Dimensions- Roller diameter- d1)	-	--
3.3 Table-1,2(Dimensions- Width between inner plates- b1)	-	--
3.3 Table-1,2(Dimensions- Bearing pin body diameter- d2)	-	--
3.3 Table-1,2(Dimensions-Bush bore-d3)	-	--
3.3 Table-1,2(Dimensions- Chain path depth- h1)	-	--
3.3 Table-1,2(Dimensions-Inner plate depth- h2)	-	--
3.3 Table-1,2(Dimensions-Outer plate depth- h3)	-	--
3.3 Table-1,2(Dimensions- Cranked link dimensions- l2)	-	--
3.3 Table-1,2(Dimensions- Cranked link dimensions- c)	-	--
3.3 Table-1,2(Dimensions- Transverse pitch- pt)	-	--
3.3 Table-1,2(Dimensions- Width over inner link- b2)	-	--
3.3 Table-1,2(Dimensions- Width between outer plates- b3)	-	--
3.3 Table-1,2(Dimensions- Width over bearing pins- b4)	-	--
3.3 Table-1,2(Dimensions- Width over bearing pins- b5)	-	--
3.3 Table-1,2(Dimensions- Width over bearing pins- b6)	-	--
3.3 Table-1,2(Dimensions- Additional width for joint fastener- b7)	-	--
3.4.2(Tensile Test)	-	--
3.4.3(Preloading)	-	--
3.4.4(Length validation- Measuring load)	-	--
3.4.4(Length validation- Length)	-	--
3.4.5(Dynamic testing)	-	--

31 Dec, 2026

-
EXCLUDING - Dynamic Strength test

IS 2415 (2015)

Cycle - Rubber tubes (Moulded/ Jointed) - Specification (Fourth Revision)

8700 View breakup
Rs.8700/- + GST

Clause No.	Exclusion	Remark
5.1,3.4, Annex A & Table 2.( Flat Length )	-	+GST@18%
5.2, Annex A(Thickness)	-	--
5.1,3.5, Annex A & Table 2.(Flat Width)	-	--
5.2.1(Uniformity of Thickness)	-	--
6.1,Table 3(i)Tensile strength:)	-	--
6.1,Table 3(ii)Elongation at break )	-	--
6.2(iii)Tension set: )	-	--
6.3 (a)( Ageing Test:- Tensile strength :)	-	--
6.3(b)( Ageing Test :- Elongation at break)	-	--
6.4.3( Strength of splice on moulded tube)	-	--
6.7.3(Manufacture and Workmanship)	-	--

31 Dec, 2026

-
0.0

IS 6218 (2008)

Bicycle - Mudguards - Specification (First Revision)

7200 View breakup
Rs.7200/- + GST

Clause No.	Exclusion	Remark
Clause-3(Carbon)	-	--
Clause-3(Sulphur)	-	--
Clause-3(Phosphorus)	-	--
Clause-3(Manganse)	-	--
Clause-3(Silicon)	-	--
Clause-3(Aluminium)	-	--
Clause-3(Chromium)	-	--
Clause-3(Nickel)	-	--
Clause-3(Niobium)	-	--
Clause-3(Vanadium)	-	--
Clause-3(Titanium)	-	--
Clause-3(Molybdenum)	-	--
Clause-3(Boron)	-	--

31 Dec, 2026

-
.

IS 623 (2008)

Bicycle - Bicycle frames - Specification (Third Revision)

19000 View breakup
Rs.19000/- + GST

Clause No.	Exclusion	Remark
4.1(FRAME TUBES )	-	+ GST@18%
4.1(CHAIN SIDE)	-	--
4.1(BACK STAY)	-	--
4.2(SCREW THREADS)	-	--
7.1(a) TRUENESS OF FRAME)	-	--
7.2.1(b) IMPACT TEST (Falling Mass))	-	--
7.2.2(c) IMPACT TEST (Falling Frame & Fork Assembly))	-	--
7.3(d) TEST FOR FINISH)	-	--

31 Dec, 2026

-
0.0

Bureau of Indian Standards

The National Standards Body of India

Research & Development Centre for Bicycle and Sewing Machine, Ludhiana

B 38-39, Phase-V, Focal Point,, Ludhiana, Ludhiana, Punjab, 141010

8054303051 bsmcrd@gmail.com

Scope List

No Record Found

No Record Found

No Record Found