BIS - LIMS (Laboratory Information Management System)

Hari Shankar Singhania Elastomer and Tyre Research Institute, HASETRI

Plot No 437, Hebbal Industrial Area, MYSORE, Mysuru, Karnataka, 570016

9414681844 saikat@hasetri.com

Scope List

Reset

10 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 15704 (2018)

Automotive vehicles - Retreaded pneumatic tyres for commercial vehicles - Specification (First Revision)

Retreaded Pneumatic Tyres for Commercial Vehicles

84375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Conditions Before Retreading)	-	0	-
4.2(Preparation)	-	0	-
4.3(Retreading)	-	0	-
4.4(Inspection)	-	0	-
5(TYRE DIMENSIONS)	-	6250	Test Charges includes Section Width, Outer Diameter, Tread Wear Indicator (TWI) & Marking.
6(Endurance Test)	-	75000	-
7(Load/Speed Performance Test)	-	18500	-
8(Marking)	-	0	Test Charges already included in Tyre Dimension Test.
4.1(Conditions Before Retreading)	-	0	-
4.2(Preparation)	-	0	-
4.2(Preparation)	-	0	-
4.3(Retreading)	-	0	-
4.4(Inspection)	-	0	-
6(Endurance Test)	-	75000	-
7(Load/Speed Performance Test)	-	18500	-
8(Marking)	-	0	-

Complete

Exclusion: Cl 4.1 (Conditions Before Retreading) Cl 4.2 (Preparation) Cl 4.3 (Retreading) Cl 4.4 (Inspection)

IS 5821 (1986)

Specification for hot - Water hose of rubber (Second Revision)

Hose

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1.1(Lining)	-	500	-
3.1.2(Reinforcement)	-	500	-
3.1.3(Cover)	-	500	-
3.3.1(Bore Size)	-	500	-
3.3.2(Lining and Cover Thickness)	-	500	-
3.3.3(Length Tested as per Cl. No. 4.3.2 of IS : 443 - 1975)	-	500	-
3.4.1(Tensile Strength and Elongation at Break of Lining and Cover)	-	1000	-
3.4.2(Accelerated Ageing)	-	1000	-
3.4.3(Adhesion)	-	1500	-
3.4.4(Hydraulic Pressure)	-	1500	-
3.4.5(Proof Pressure)	-	1000	-
4(Packing and Marking)	-	500	-
6(TIME LAPSE BETWEEN RECEIPT OF MATERIAL AND TESTING)	-	500	-

Complete

Exclusion: Cl 3.4.6 (Resistance to Hot Water) Cl 3.4.7 (Water Absorption) Scope restriction: From 10 mm to 25 mm

IS 637 (2024)

Rubber Tubings for General Purposes â Specification (Third Revision)

Tubings

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Material)	-	500	-
3.2(Dimension)	-	500	-
4(Packing and Marking)	-	500	-
6.2(Test Pieces)	-	500	-
6.3(Tensile Strength and Elongation)	-	1000	-
6.3(Tensile Strength and Elongation)	-	1000	-
6.4.1(Apparatus)	-	500	-
6.4.2(Temperature)	-	500	-
6.4.3(Procedure)	-	1000	-
6.5(Accelerated Ageing)	-	2000	-
6.5(Accelerated Ageing)	-	1000	-
6.6(Resistance to Ageing Under Tension)	-	500	-
6.7(Leakage Test)	-	500	-
Cl-4.1(Materials)	-	500	-
Cl-4.2(Dimension)	-	500	-
Cl-5(Packing and Marking)	-	500	-
Cl-4.3, Table-2 (i)(Tensile strength, kg/cm2, Min)	-	1000	-
Cl-4.4, Table-3 (i)(Stretch, percent, Max)	-	1000	-
Cl-4.5(Accelerated Ageing Test)	-	1000	-
Cl-4.6(Resistance to Ageing Under Tension)	-	1000	-
Cl-4.7(Leakage)	-	1000	-
Cl-4.3, Table-2 (ii)(Elongation at break, percent, Min)	-	1000	-
Cl-4.4, Table-3 (ii)(Tension set, percent, Max)	-	1000	-

Complete

Scope restriction: For 5 mm, 8 mm, 10 mm, 12.5 mm only

IS 9573 : Part 2 (2017)

Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 2 domestic and commercial application (Fourth Revision)

Hose

19250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1(General)	-	250	-
Clause 4.2(Material)	-	250	-
Clause 4.2.1(Lining)	-	250	-
Clause 4.2.2 (a)(Reinforcement)	-	250	-
Clause 4.2.2 (b)(Reinforcement)	-	250	-
Clause 4.2.3(Cover)	-	250	-
Clause 4.3 Sub Clause 4.3.1 Table 1(Bore Size)	-	250	-
Clause 4.3 Sub Clause 4.3.2 (a)(Thickness of Lining and Cover)	-	250	-
Clause 4.3 Sub Clause 4.3.2 (b)(Thickness of Lining and Cover)	-	250	-
Clause 4.3 Sub Clause 4.3.3(Length)	-	250	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (a)(Tensile Strength- Lining)	-	500	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (b)(Tensile Strength- cover)	-	500	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (a)(Elongation at break- Lining)	-	500	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (b)(Elongation at break- Cover)	-	500	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test lining)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test lining)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test cover)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test cover)	-	1000	-
Clause 4.5 Sub clause 4.5.1(Adhesion)	-	1000	-
Clause 4.5 Sub clause 4.5.2(Low Temperature Flexibility)	-	1000	-
Clause 4.5 Sub clause 4.5.3(Flexibility of Hose)	-	500	-
Clause 4.5 Sub clause 4.5.4(Ozone Resistance)	-	2000	-
Clause 4.5 Sub clause 4.5.5 4.5.5.1(Proof pressure test)	-	1000	-
Clause 4.5 Sub clause 4.5.5 4.5.5.2(Bursting pressure)	-	1000	-
Clause 4.5 Sub clause 4.5.6(Grip Strength Test)	-	1000	-
Clause 4.5 Sub clause 4.5.7(Burning Behaviour)	-	250	-
Clause 5.2 (a)(Marking Manufacturer’s name or trade-mark, if any )	-	250	-
Clause 5.2 (b)(Marking Words LPG, Max W.P. 1.0 MPa; )	-	250	-
Clause 5.2 (c)(Marking Nominal bore, 1000111)	-	250	-
Clause 5.2 (d)(Marking Batch/Lot No. )	-	250	-
Clause 5.2 (e)(Marking Month and year of manufacture )	-	250	-
Clause 5.2 (f)(Marking IS 9573 (Part 2) )	-	250	-
Clause 5.2 (f)(Marking ecommended to replace before (MONTH/YEAR) )	-	250	-
Clause 5.2.1(BIS Certification Marking )	-	250	-
Clause 4.4 Sub Clause 4.4.3 (a)(Resistance of Lining to n-pentane)	-	500	-
Clause 4.4 Sub Clause 4.4.3 (b)(Resistance of Lining to n-pentane)	-	500	-

Complete

IS 9573 : Part 1 (2017)

Rubber hose for liquefied petroleum gas (Lpg) - Specification: Part 1 industrial application (Fourth Revision)

Hose

18500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1 (General)	-	250	-
Clause 4.1 (General)	-	250	-
Clause 4.2(Material)	-	250	-
Clause 4.1(General)	-	250	-
Clause 4.2.1(Lining)	-	250	-
Clause 4.2.2(Reinforcement)	-	250	-
Clause 4.2.3(Cover)	-	250	-
Clause 4.3 Sub Clause 4.3.1 Table 1(Bore Size)	-	250	-
Clause 4.3 Sub Clause 4.3.2 (a)(Thickness of Lining and Cover)	-	250	-
Clause 4.3 Sub Clause 4.3.3(Length)	-	250	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (a)(Tensile Strength- Lining)	-	500	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (i) (b)(Tensile Strength- cover)	-	500	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (a)(Elongation at break- Lining)	-	500	-
Clause 4.4 Sub Clause 4.4.1 Table 2 (ii) (b)(Elongation at break- cover)	-	500	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test lining)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test lining)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (a)(Accelerated Ageing Test cover)	-	1000	-
Clause 4.4 Sub Clause 4.4.2 (b)(Accelerated Ageing Test cover)	-	1000	-
Clause 4.5 Sub clause 4.5.1(Adhesion)	-	1000	-
Clause 4.5 Sub clause 4.5.2(Low Temperature Flexibility)	-	1000	-
Clause 4.5 Sub clause 4.5.3(Flexibility of Hose)	-	500	-
Clause 4.5 Sub clause 4.5.4(Ozone Resistance)	-	2000	-
Clause 4.5 Sub clause 4.5.5 4.5.5.1(Proof pressure test)	-	1000	-
Clause 4.5 Sub clause 4.5.5 4.5.5.2(Bursting pressure)	-	1000	-
Clause 4.5 Sub clause 4.5.6(Electrical Continuity Test)	-	250	-
Clause 4.5 Sub clause 4.5.7(Burning Behaviour)	-	250	-
Clause 5.2 (a)(Marking Manufacturer’s name or trade-mark, if any )	-	250	-
Clause 5.2 (b)(Marking Words LPG, Max W.P. 2.5 MPa; )	-	250	-
Clause 5.2 (c)(Marking Nominal bore )	-	250	-
Clause 5.2 (d)(Marking Batch/Lot No. )	-	250	-
Clause 5.2 (e)(Marking Month and year of manufacture )	-	250	-
Clause 5.2.1(BIS Certification Marking )	-	250	-
Clause 5.2 (f)(Marking IS 9573 (Part 1) )	-	250	-
Clause 4.3 Sub Clause 4.3.2 (b)(Thickness of Lining and Cover)	-	250	-
Clause 4.4 Sub Clause 4.4.3 (a)(Resistance of Lining to n-pentane)	-	500	-
Clause 4.4 Sub Clause 4.4.3 (b)(Resistance of Lining to n-pentane)	-	500	-

Complete

Scope restriction: From 6 mm to 25 mm

IS 15636 (2022)

Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply

Commercial Vehicles — Diagonal and Radial Ply

99375 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2.2(Technical specification-Declaration)	-	0	-
5(Marking)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
4.1(Tyre dimension- Section Width)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
4.1(Tyre dimension- Outer diameter)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
4.1.1(Tread wear Indicator)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
4.5(Tyre strength (Plunger test))	-	15000	-
4.2(Endurance test-Change in diameter)	-	75000	-
4.3(Load & Speed test)	-	18500	-
Cl. No. 4.1.1.1, Annex A, Table No. 6 to 28(Tyre Dimension_Section Width of Tyre)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 4.1.1.2, Annex A, Table No. 6 to 28(Tyre Dimension_Outer Diameter of Tyre)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 4.2, Annex B, Table No. 29(Endurance Test)	-	75000	-
Cl. No. 4.2.5, Annex B, Table No. 29(Second Endurance Test)	-	75000	-
Cl. No. 4.3, Annex C, Table No. 18(Load/ Speed Performance Test)	-	18500	-
Cl. No. 4.4, Annex-A(Tread Wear Indicators)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 4.5, Annex D, Table No.30 to 33(Tyre Strength Test (Plunger Test)Test)	-	15000	-
Cl. No. 5.1(a) to (m)(Markings)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 5.2, Annex E,(Arrangement of Tyre Markings)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 4.1.1.1, Annex A, Table No. 6 to 28(Tyre Dimension_Section Width of Tyre)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 4.1.1.2, Annex A, Table No. 6 to 28(Tyre Dimension_Outer Diameter of Tyre)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 4.2, Annex B, Table No. 29(Endurance Test)	-	75000	-
Cl. No. 4.2.5, Annex B, Table No. 29(Second Endurance Test)	-	75000	-
Cl. No. 4.3, Annex C, Table No. 18(Load/ Speed Performance Test)	-	18500	-
Cl. No. 4.4, Annex-A(Tread Wear Indicators)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 4.5, Annex D, Table No.30 to 33(Tyre Strength Test (Plunger Test)Test)	-	15000	-
Cl. No. 5.1(a) to (m)(Markings)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings
Cl. No. 5.2, Annex E,(Arrangement of Tyre Markings)	-	6250	Dimension charges include section width, outer diameter, treadwear indicators & markings

Complete

IS 15633 (2022)

Automotive vehicles - pneumatic tyres for passenger car vehicles - diagonal and radial ply

Passenger Car Vehicle — Diagonal and Radial Ply

96875 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.2.2,Anx-J(Technical specification-Declaration)	-	0	-
5(Marking)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
4.1(Tyre dimension- Section Width)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
4.1(Tyre dimension- Outer diameter)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
4.5(Tread wear Indicator)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
4.6(Tyre strength (Plunger test))	-	10000	-
4.3(Endurance test)	-	65000	-
4.2(Load & Speed test)	-	15625	-
4.4(Bead Unseating Resistance)	-	10000	-
Cl. No. 4.1.1.1, Annex A, B Table No. 9 to 15 & 16(Tyre Dimension_Section Width of Tyre)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 4.1.1.2, Annex A, B Table No. 9 to 15 & 16(Tyre Dimension_Outer Diameter of Tyre)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 4.2, Annex C, Table No. 17(Load/Speed Performance Test)	-	15625	-
Cl. No. 4.3, Annex D, Table No. 18(Endurance Test)	-	65000	-
Cl. No. 4.4, Annex E, Table No.19 to 21(Bead Unseating Resistance Test)	-	10000	-
Cl. No. 4.5, Annex-B(Tread Wear Indicators)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 4.6, Annex-F, Table No. 22 to 24(Tyre Strength Test (Plunger Test))	-	10000	-
Cl. No. 5.1 (a) to 5.1 (n)(Markings)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 5.4, Annex H,(Arrangement of Tyre Markings)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 4.1.1.1, Annex A, B Table No. 9 to 15 & 16(Tyre Dimension_Section Width of Tyre)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 4.1.1.2, Annex A, B Table No. 9 to 15 & 16(Tyre Dimension_Outer Diameter of Tyre)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 4.2, Annex C, Table No. 17(Load/Speed Performance Test)	-	15625	-
Cl. No. 4.3, Annex D, Table No. 18(Endurance Test)	-	65000	-
Cl. No. 4.4, Annex E, Table No.19 to 21(Bead Unseating Resistance Test)	-	10000	-
Cl. No. 4.5, Annex-B(Tread Wear Indicators)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 4.6, Annex-F, Table No. 22 to 24(Tyre Strength Test (Plunger Test))	-	10000	-
Cl. No. 5.1 (a) to 5.1 (n)(Markings)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
Cl. No. 5.4, Annex H,(Arrangement of Tyre Markings)	-	5000	Dimension charges includes section width, outer diameter, tread wear indicators & markings
4.2.7 (Amendment -1)(Load/Speed Performance Test for Run Flat Tyres)	-	15625	-
4.2.8 (Amendment -1)(Load/Speed Performance Test for Extended Mobility Tyres (EMT))	-	15625	-

Complete

IS 13098 (2012)

Automotive vehicles - Tubes for pneumatic tyres - Specification (First Revision)

Tube

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3/3.1 (for valve refer IS 9081)(MATERIALS, FORM AND FIT)	-	250	-
3/3.3(Uniformity(The Thickness shall not vary from the arithmetic mean of the readings by ± 17.5 % at any point in longitudinal direction :-Crown centre,Base centre,Side wall - 1,Side wall - 2))	-	250	-
4/4.1.1(Elongation at break (Class A' Tubes))	-	500	-
4/4.1.1(Elongation at break (Class B' Tubes))	-	500	-
4/4.1.2( Strength of Splice (Class A' Tubes))	-	500	-
4/4.1.2( Strength of Splice (Class B' Tubes))	-	500	-
4/4.1.3 Refer annex B(Set After Ageing(Class A' Tubes))	-	500	-
4/4.1.3 Refer annex B(Set After Ageing(Class B' Tubes))	-	500	-
4/4.1.4 Refer annex C(Accelerated Ageing(Both Class A and Class B))	-	1000	-
5(AIR TIGHTNESS)	-	500	-
6(MARKING)	-	250	-
6.1(Tubes Shall be permanently and legibly marked on the outside with the following;)	-	250	-
6.1(a)(Manufacturer's name or trade-name)	-	250	-
6.1(b)(Tyre size designation or designations for which the tube is applicable . The size designation description shall contain, (1) nominal tyre section width code; (2) nominal rim diameter code; (3) nominal aspect ratio, if applicable; (4) 'R' to identify Radial tyre application; and (5) character '-' or the letter 'D' to identify bias tyre application.)	-	250	-
6.1 (c)(Identification of month and year of manufacturing as per scheme given in Annex D.)	-	250	-
6.1 (d)(Word 'BUTYL' and or blue line of 4.0mm min width to identify tube of Class A.)	-	250	-
3.2(Tube Material)	-	250	-
4.1.1(% Elongation at break (Before Ageing))	-	500	-
4.1.2(Strength of Splice)	-	500	-
4.1.3(Set After Ageing (Tension Set))	-	500	-
4.1.4(Accelerated Ageing at 100±2°C for 48 hours. (% drop in Elongation at break))	-	1000	-
5(Air Tightness)	-	250	-
6("Marking 1. Manufacturer's name or Trade name (C1. No.6.1. a) 2. Size Designation (Cl. No. 6.1.b) 3. Identification of month and year of manufacturing (C1. No.6.1.c) 4. ‘Butyl’ Mark and or Blue line of 4.0mm width (Cl. No. 6.1.d) 5. BIS Certification Marking (C1. No.6.2)")	-	250	-
3.3.1(Thickness Uniformity)	-	250	-

Complete

Exclusion: Cl 3 & Cl 3.1 (Material)

IS 15627 (2022)

Automotive Vehicles - Pneumatic Tyres for Two and Three - Wheeled Motor Vehicles - Specification First Revision

Two and Three-Wheeled Motor Vehicle

93750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No. 4.1.1.1, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Section Width of Tyre)	-	5000	Dimension includes Section Width, Outer Diameter, Tread wear indicator & Markings
Cl. No. 4.1.1.2, Annex D, Table No. 5(a), 5(b), 6(a), 6(b), 7 to 12(Tyre Dimension_Outer Diameter of Tyre)	-	5000	Dimension includes Section Width, Outer Diameter, Tread wear indicator & Markings
Cl. No. 4.2 & E-1.2, Annex E, Table No. 13(Load/Speed Performance Test)	-	15625	-
Cl. No. 4.3 & F-3.4, Annex F, Table No. 14(Dynamic Growth of Tyres)	-	25000	Charges includes high speed testing charges also.
Cl. No. 4.4, G-1, G-6.1 and G-6.3, Annex G, Table No.15 to 17(Tyre Strengtrh Test (Plunger Test))	-	10000	-
Cl. No. 4.5, H-4 & E-1.2 Annex H, Table No. 18(Endurance Test)	-	65000	-
Cl. No. 4.6,Annex-D(Tread Wear Indicators)	-	2500	Dimension includes Section Width, Outer Diameter, Tread wear indicator
Cl. No. 5.1(a) to 5.1 (u)(Markings)	-	5000	Dimension includes Section Width, Outer Diameter, Tread wear indicator & Markings
Cl. No. 5.2, Annex H, Table No. 19 & 20(Arrangement of Tyre Markings)	-	5000	Dimension includes Section Width, Outer Diameter, Tread wear indicator & Markings

Complete

Scope may be restricted to all except Quadricycles and E-Rikshaw/E-Carts accordingly

IS 9168 (2018)

Automotive vehicle - All rubber flaps for pneumatic tyres - Specification (Second Revision)

Flaps

4000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(Design and Construction)	-	500	-
4(Designation)	-	500	-
5.1.1(Moulded Flap)	-	500	-
5.1.2(Flap with Overlap Joint)	-	500	-
5.2(Hardness)	-	500	-
5.3(Retention of Properties on Ageing)	-	1000	-
6(Marking)	-	500	-
3(Design and Construction)	-	500	-
4(Designation)	-	500	-
5.1.1(Moulded Flap)	-	500	-
5.1.2(Flap with Overlap Joint)	-	500	-
5.2(Hardness)	-	500	-
5.3(Retention of Properties on Ageing)	-	1000	-
6(Marking)	-	500	-

Complete

Bureau of Indian Standards

The National Standards Body of India

Hari Shankar Singhania Elastomer and Tyre Research Institute, HASETRI

Plot No 437, Hebbal Industrial Area, MYSORE, Mysuru, Karnataka, 570016

9414681844 saikat@hasetri.com

Scope List