| 1 |
IS 16415 (2015) |
Composite cement - Specification |
Composite Cement |
26000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6(Chemical Requirements) |
- |
0 |
|
- |
| 7(Physical Requirement) |
- |
0 |
|
- |
| 6 -Table - 2 i(Insoluble residue - Cl 4.10 of IS 4032:1985) |
- |
1000 |
|
30% Discount |
| 6 -Table - 2 ii(Magnesia - Cl 4.8 of IS 4032:1985) |
- |
2000 |
|
30% Discount |
| 6 -Table - 2 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985) |
- |
1000 |
|
30% Discount |
| 6 -Table - 2 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985) |
- |
1000 |
|
30% Discount |
| 6 -Table - 2 v(Loss on ignition - Cl 4.2 of IS 4032:1985) |
- |
1000 |
|
30% Discount |
| 6 -Table - 2 vi(Chloride content - Cl 4.13 of IS 4032:1985) |
- |
1000 |
|
30% Discount |
| Cl. 6.1,Table 2(Alkali content) |
- |
2000 |
|
30% Discount |
| 6 -Table - 2 i(Insoluble residue - Cl 4.10 of IS 4032:1985) |
- |
0 |
|
- |
| 6 -Table - 2 ii(Magnesia - Cl 4.8 of IS 4032:1985) |
- |
0 |
|
- |
| 6 -Table - 2 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985) |
- |
0 |
|
- |
| 6 -Table - 2 iv(Sulphide sulphur (S) - Cl 6.12 of IS 4032:1985) |
- |
0 |
|
- |
| 6 -Table - 2 v(Loss on ignition - Cl 4.2 of IS 4032:1985) |
- |
0 |
|
- |
| 6 -Table - 2 vi(Chloride content - Cl 4.13 of IS 4032:1985) |
- |
0 |
|
- |
| Cl. 6.1,Table 2(Chloride content) |
- |
0 |
|
- |
| Cl. 6.1,Table 2(Loss on ignition) |
- |
0 |
|
- |
| Cl. 6.1,Table 2(Suilphide sulphur) |
- |
0 |
|
- |
| Cl. 6.1,Table 2(Total sulphur content calculated as sulphuric anhydride) |
- |
0 |
|
- |
| Cl. 6.1,Table 2(Magnesia) |
- |
0 |
|
- |
| Cl. 6.1,Table 2(Insoluble residue) |
- |
0 |
|
- |
| 7 and Table 3 i(Fineness
IS 4031(Part 2)) |
- |
1000 |
|
30% Discount |
| 7 and Table 3 ii a(Soundness, Le-Chate1ier expansion
IS 4031(Part 3) ) |
- |
1000 |
|
30% Discount |
| 7 and Table 3 ii b(Soundness, Autoclave expansion
IS 4031(Part 3) ) |
- |
1000 |
|
30% Discount |
| 7 and Table 3 iii a(Setting Time ( by Vicat Apparatus), Initial
IS 4031(Part 5)) |
- |
500 |
|
30% Discount |
| 7 and Table 3 iii b(Setting Time ( by Vicat Apparatus ), Final
IS 4031(Part 5)) |
- |
500 |
|
30% Discount |
| 7 and Table 3 iv a(Compretsive Strenqth .72 ± 1 hr
IS 4031(Part 6)) |
- |
5000 |
|
30% Discount |
| 7 and Table 3 iv b(Compretsive Strenqth 168 ± 2 hr
IS 4031(Part 6)) |
- |
0 |
|
- |
| 7 and Table 3 iv c(Compretsive Strenqth 672 ± 4 hr
IS 4031(Part 6)) |
- |
0 |
|
- |
| 7 and Table 3 v(Drying shrinkage
IS 4031(Part 10)) |
- |
3000 |
|
30% Discount |
| 7 and Table 3 vi(Transverse strength (optional)
IS 4031(Part 8) ) |
- |
5000 |
|
30% Discount |
| 7 and Table 3 i(Fineness
IS 4031(Part 2)) |
- |
0 |
|
- |
| 7 and Table 3 ii a(Soundness, Le-Chate1ier expansion
IS 4031(Part 3) ) |
- |
0 |
|
- |
| 7 and Table 3 ii b(Soundness, Autoclave expansion
IS 4031(Part 3) ) |
- |
0 |
|
- |
| 7 and Table 3 iii a(Setting Time ( by Vicat Apparatus), Initial
IS 4031(Part 5)) |
- |
0 |
|
- |
| 7 and Table 3 iii b(Setting Time ( by Vicat Apparatus ), Final
IS 4031(Part 5)) |
- |
0 |
|
- |
| 7 and Table 3 iv a(Compretsive Strenqth .72 ± 1 hr
IS 4031(Part 6)) |
- |
0 |
|
- |
| 7 and Table 3 iv b(Compretsive Strenqth 168 ± 2 hr
IS 4031(Part 6)) |
- |
0 |
|
- |
| 7 and Table 3 iv c(Compretsive Strenqth 672 ± 4 hr
IS 4031(Part 6)) |
- |
0 |
|
- |
| 7 and Table 3 v(Drying shrinkage
IS 4031(Part 10)) |
- |
0 |
|
- |
| 7 and Table 3 vi(Transverse strength (optional)
IS 4031(Part 8) ) |
- |
0 |
|
- |
| 6(Chemical Requirements) |
- |
0 |
|
- |
| 7(Physical Requirement) |
- |
0 |
|
- |
| Cl. 6.1,Table 2(Alkali content) |
- |
0 |
|
- |
| Cl. 6.1,Table 2(Chloride content) |
- |
0 |
|
- |
| Cl. 6.1,Table 2(Loss on ignition) |
- |
0 |
|
- |
| Cl. 6.1,Table 2(Suilphide sulphur) |
- |
0 |
|
- |
| Cl. 6.1,Table 2(Total sulphur content calculated as sulphuric anhydride) |
- |
0 |
|
- |
| Cl. 6.1,Table 2(Magnesia) |
- |
0 |
|
- |
| Cl. 6.1,Table 2(Insoluble residue) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
Included w.e.f.12.03.2025 |
| 2 |
IS 4783 (2024) |
Thiram powder for dry seed treatment - Specification (second revision) |
- |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2.1(Description - IS 4783:2024) |
- |
2000 |
|
30% Discount |
| 3.2.2(Colour - IS 4783:2024) |
- |
1000 |
|
30% Discount |
| 3.2.3(Sieving Requirement 150 micron sieve - IS 4783:2024) |
- |
2000 |
|
30% Discount |
| 3.3.1.(Thiram Content - IS 4320:2024) |
- |
5000 |
|
30% Discount |
|
31 Dec, 2026 |
-
Included w.e.f 29.07.2025 |
| 3 |
IS 4766 (2024) |
Thiram water dispersible powder for slurry seed treatment - Specification (second revision) |
- |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| CL 3.2.1(Description) |
- |
1000 |
|
30% discount |
| CL. 3.2.2(Colour) |
- |
0 |
|
This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.2.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL. 3.2.2(Colour) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3.1(Thiram Content) |
- |
5000 |
|
30% discount |
| CL. 3.2.3(Sieving) |
- |
2000 |
|
30% discount |
| 3.1(Description - IS 4766:2024) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.3, 7.1, Table 1 (i)(Thiram Content - IS 4320:2024) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.3, 7.1, Table 1 (ii)(Material passing through 53 micron IS sieve - IS 6940:1982) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.3, 7.1, Table 1 (iii)(Wettability - IS 6940:1982) |
- |
2000 |
|
30% discount |
| CL 3.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3, Table 1, S.No (i)(Thiram Content) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3, Table 1, S.No (ii)(Sieving) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3, Table 1, S.No (iii)(Wettability) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| Table 1, S.No (i)(Bis (dimethylthiocarbamoyl) disulphide content, percent by mass, Min) |
- |
0 |
|
These parameter is not covered in BIS Specification IS 4766:2024. Therefor , we have not included the charges for Active Ingredient , LOD , Ash content in this as per IS 4766:2024. We are also not claiming these tests under 2024 version of IS 4766 |
| Table 1, S.No (ii)(Loss on drying at 60 °C, percent by mass, Max) |
- |
0 |
|
These parameter is not covered in BIS Specification IS 4766:2024. Therefor , we have not included the charges for Active Ingredient , LOD , Ash content in this as per IS 4766:2024. We are also not claiming these tests under 2024 version of IS 4766 |
| Table 1, S.No (iii)(Ash content, percent by mass, Max) |
- |
0 |
|
These parameter is not covered in BIS Specification IS 4766:2024. Therefor , we have not included the charges for Active Ingredient , LOD , Ash content in this as per IS 4766:2024. We are also not claiming these tests under 2024 version of IS 4766 |
| CL. 3.2.2(Colour) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.2.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL. 3.2.2(Colour) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3.1(Thiram Content) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL. 3.2.3(Sieving) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.1(Description - IS 4766:2024) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.3, 7.1, Table 1 (i)(Thiram Content - IS 4320:2024) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.3, 7.1, Table 1 (ii)(Material passing through 53 micron IS sieve - IS 6940:1982) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.3, 7.1, Table 1 (iii)(Wettability - IS 6940:1982) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3, Table 1, S.No (i)(Thiram Content) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3, Table 1, S.No (ii)(Sieving) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3, Table 1, S.No (iii)(Wettability) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| Table 1, S.No (i)(Bis (dimethylthiocarbamoyl) disulphide content, percent by mass, Min) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| Table 1, S.No (ii)(Loss on drying at 60 °C, percent by mass, Max) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| Table 1, S.No (iii)(Ash content, percent by mass, Max) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.2.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL. 3.2.2(Colour) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.2.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL. 3.2.2(Colour) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3.1(Thiram Content) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL. 3.2.3(Sieving) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.1(Description - IS 4766:2024) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.3, 7.1, Table 1 (i)(Thiram Content - IS 4320:2024) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.3, 7.1, Table 1 (ii)(Material passing through 53 micron IS sieve - IS 6940:1982) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.3, 7.1, Table 1 (iii)(Wettability - IS 6940:1982) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3, Table 1, S.No (i)(Thiram Content) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3, Table 1, S.No (ii)(Sieving) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3, Table 1, S.No (iii)(Wettability) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| Table 1, S.No (i)(Bis (dimethylthiocarbamoyl) disulphide content, percent by mass, Min) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| Table 1, S.No (ii)(Loss on drying at 60 °C, percent by mass, Max) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| Table 1, S.No (iii)(Ash content, percent by mass, Max) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.2.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.2.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL. 3.2.2(Colour) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3.1(Thiram Content) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL. 3.2.3(Sieving) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.1(Description - IS 4766:2024) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.3, 7.1, Table 1 (i)(Thiram Content - IS 4320:2024) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.3, 7.1, Table 1 (ii)(Material passing through 53 micron IS sieve - IS 6940:1982) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.3, 7.1, Table 1 (iii)(Wettability - IS 6940:1982) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3, Table 1, S.No (i)(Thiram Content) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3, Table 1, S.No (ii)(Sieving) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3, Table 1, S.No (iii)(Wettability) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| Table 1, S.No (i)(Bis (dimethylthiocarbamoyl) disulphide content, percent by mass, Min) |
- |
0 |
|
These parameter is not covered in BIS Specification IS 4766:2024. Therefor , we have not included the charges for Active Ingredient , LOD , Ash content in this as per IS 4766:2024. We are also not claiming these tests under 2024 version of IS 4766 |
| Table 1, S.No (ii)(Loss on drying at 60 °C, percent by mass, Max) |
- |
0 |
|
These parameter is not covered in BIS Specification IS 4766:2024. Therefor , we have not included the charges for Active Ingredient , LOD , Ash content in this as per IS 4766:2024. We are also not claiming these tests under 2024 version of IS 4766 |
| Table 1, S.No (iii)(Ash content, percent by mass, Max) |
- |
0 |
|
These parameter is not covered in BIS Specification IS 4766:2024. Therefor , we have not included the charges for Active Ingredient , LOD , Ash content in this as per IS 4766:2024. We are also not claiming these tests under 2024 version of IS 4766 |
| CL 3.2.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL. 3.2.2(Colour) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.2.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL. 3.2.2(Colour) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3.1(Thiram Content) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL. 3.2.3(Sieving) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.1(Description - IS 4766:2024) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.3, 7.1, Table 1 (i)(Thiram Content - IS 4320:2024) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.3, 7.1, Table 1 (ii)(Material passing through 53 micron IS sieve - IS 6940:1982) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.3, 7.1, Table 1 (iii)(Wettability - IS 6940:1982) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3, Table 1, S.No (i)(Thiram Content) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3, Table 1, S.No (ii)(Sieving) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.3, Table 1, S.No (iii)(Wettability) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL 3.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| Table 1, S.No (i)(Bis (dimethylthiocarbamoyl) disulphide content, percent by mass, Min) |
- |
0 |
|
These parameter is not covered in BIS Specification IS 4766:2024. Therefor , we have not included the charges for Active Ingredient , LOD , Ash content in this as per IS 4766:2024. We are also not claiming these tests under 2024 version of IS 4766 |
| Table 1, S.No (ii)(Loss on drying at 60 °C, percent by mass, Max) |
- |
0 |
|
These parameter is not covered in BIS Specification IS 4766:2024. Therefor , we have not included the charges for Active Ingredient , LOD , Ash content in this as per IS 4766:2024. We are also not claiming these tests under 2024 version of IS 4766 |
| Table 1, S.No (iii)(Ash content, percent by mass, Max) |
- |
0 |
|
These parameter is not covered in BIS Specification IS 4766:2024. Therefor , we have not included the charges for Active Ingredient , LOD , Ash content in this as per IS 4766:2024. We are also not claiming these tests under 2024 version of IS 4766 |
| CL 3.2.1(Description) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| CL. 3.2.2(Colour) |
- |
0 |
|
(Repeat Entry on portal) This is portal issue compulsory to map all parameter . We can't do anything from our side for this issue |
| 3.1(Description - IS 4766:2024) |
- |
0 |
|
- |
| 3.3, 7.1, Table 1 (i)(Thiram Content - IS 4320:2024) |
- |
0 |
|
- |
| 3.3, 7.1, Table 1 (ii)(Material passing through 53 micron IS sieve - IS 6940:1982) |
- |
0 |
|
- |
| 3.3, 7.1, Table 1 (iii)(Wettability - IS 6940:1982) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
Included w.e.f 26.09.2025
Exclusion: "CL 3.1 (Description)
CL 3.2.1 (Description)
CL 3.3, Table 1, S.No (i) (Thiram Content)
CL 3.3, Table 1, S.No (iii) (Wettability)
CL 3.3.1 (Thiram Content)
CL. 3.2.2 (Colour)
CL. 3.2.3 (Sieving)
Table 1, S.No (i) (Bis (dimethylthiocarbamoyl) disulphide content, percent by mass, Min)
" |
| 4 |
IS 4320 (2024) |
Thiram technical - Specification Second Revision |
- |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Description - IS 4320:2024) |
- |
1000 |
|
30% Discount |
| 3.2, 7.1, Table 1 (i)(Bis (dimethylthiocarbamoyl) disulphide - IS 4320:2024) |
- |
5000 |
|
30% Discount |
| 3.2, 7.1, Table 1 (ii)(Loss on drying at 60°C -- IS 4320:2024) |
- |
2000 |
|
30% Discount |
| 3.2, 7.1, Table 1 (iii)(Ash content - IS 4320:2024) |
- |
2000 |
|
30% Discount |
|
31 Dec, 2026 |
-
Included .w.e.f.02.07.2025 |
| 5 |
IS 6444 (2023) |
Sulphur Dusting Powders - Specification second revision |
- |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Description - IS 6444:2023) |
- |
1000 |
|
30% discount |
| 3.2.1 & 3.2 Table 1 (i)(Sulphr Content - IS 6444:2023) |
- |
5000 |
|
30% discount |
| 3.2 Table 1 (ii)(Material passing through 75 micron IS Sieve - IS 6940:1982) |
- |
2000 |
|
30% discount |
| 3.2 Table 1 (iii)(Bulk Density after compacting - IS 6940:1982) |
- |
2000 |
|
30% discount |
|
31 Dec, 2026 |
-
Included w.e.f.02.07.2025 |
| 6 |
IS 3383 (2023) |
SULPHUR WETTABLE POWDERS SPECIFICATION |
- |
20000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Description - IS 3383:2023) |
- |
1000 |
|
30% Discount |
| 3.2.1 & 3.2 Table 1 (i)(Sulphr Content - IS 3383:2023) |
- |
4000 |
|
30% Discount |
| 3.2 Table 1 (ii)(Material passing through 45 micron IS Sieve - IS 6940:1982) |
- |
1000 |
|
30% Discount |
| 3.2 Table 1 (iii)(Suspensibility, after accelerated storage - IS 6940:1982) |
- |
12000 |
|
30% Discount |
| 3.2 Table 1 (iv)(Wettability - IS 6940:1982) |
- |
1000 |
|
30% Discount |
| 3.2 Table 1 (v)(Arsenic (as As) - IS 3383:2023) |
- |
1000 |
|
30% Discount |
| Cl-3.1(Description) |
- |
0 |
|
- |
| Cl-3.2, Table-1 (i)(Sulphur content, percent by mas, Min) |
- |
0 |
|
- |
| Cl-3.2, Table-1 (ii)(Material passing through 45 micron IS Sieve [see IS 460 (Part 1)], after accelerated storage, percent by mass, Min) |
- |
0 |
|
- |
| Cl-3.2, Table-1 (iii)(Suspensibility, after accelerated storage, percent by mass, Min) |
- |
0 |
|
- |
| Cl-3.2, Table-1 (iv)(Wettability, Max) |
- |
0 |
|
- |
| Cl-3.2, Table-1 (v)(Arsenic (as As), percent by mass, Max) |
- |
0 |
|
- |
| Cl-3.2.1(Sulphur Content) |
- |
0 |
|
- |
| Cl-5(Marking) |
- |
0 |
|
- |
| 3.1(Description - IS 3383:2023) |
- |
0 |
|
- |
| 3.2.1 & 3.2 Table 1 (i)(Sulphr Content - IS 3383:2023) |
- |
0 |
|
- |
| 3.2 Table 1 (ii)(Material passing through 45 micron IS Sieve - IS 6940:1982) |
- |
0 |
|
- |
| 3.2 Table 1 (iii)(Suspensibility, after accelerated storage - IS 6940:1982) |
- |
0 |
|
- |
| 3.2 Table 1 (iv)(Wettability - IS 6940:1982) |
- |
0 |
|
- |
| 3.2 Table 1 (v)(Arsenic (as As) - IS 3383:2023) |
- |
0 |
|
- |
| Cl-3.1(Description) |
- |
0 |
|
- |
| Cl-3.2, Table-1 (i)(Sulphur content, percent by mas, Min) |
- |
0 |
|
- |
| Cl-3.2, Table-1 (ii)(Material passing through 45 micron IS Sieve [see IS 460 (Part 1)], after accelerated storage, percent by mass, Min) |
- |
0 |
|
- |
| Cl-3.2, Table-1 (iii)(Suspensibility, after accelerated storage, percent by mass, Min) |
- |
0 |
|
- |
| Cl-3.2, Table-1 (iv)(Wettability, Max) |
- |
0 |
|
- |
| Cl-3.2, Table-1 (v)(Arsenic (as As), percent by mass, Max) |
- |
0 |
|
- |
| Cl-3.2.1(Sulphur Content) |
- |
0 |
|
- |
| Cl-5(Marking) |
- |
0 |
|
- |
| 3.1(Description - IS 3383:2023) |
- |
0 |
|
- |
| 3.2.1 & 3.2 Table 1 (i)(Sulphr Content - IS 3383:2023) |
- |
0 |
|
- |
| 3.2 Table 1 (ii)(Material passing through 45 micron IS Sieve - IS 6940:1982) |
- |
0 |
|
- |
| 3.2 Table 1 (iii)(Suspensibility, after accelerated storage - IS 6940:1982) |
- |
0 |
|
- |
| 3.2 Table 1 (iv)(Wettability - IS 6940:1982) |
- |
0 |
|
- |
| 3.2 Table 1 (v)(Arsenic (as As) - IS 3383:2023) |
- |
0 |
|
- |
| Cl-3.1(Description) |
- |
0 |
|
- |
| Cl-3.2, Table-1 (i)(Sulphur content, percent by mas, Min) |
- |
0 |
|
- |
| Cl-3.2, Table-1 (ii)(Material passing through 45 micron IS Sieve [see IS 460 (Part 1)], after accelerated storage, percent by mass, Min) |
- |
0 |
|
- |
| Cl-3.2, Table-1 (iii)(Suspensibility, after accelerated storage, percent by mass, Min) |
- |
0 |
|
- |
| Cl-3.2, Table-1 (iv)(Wettability, Max) |
- |
0 |
|
- |
| Cl-3.2, Table-1 (v)(Arsenic (as As), percent by mass, Max) |
- |
0 |
|
- |
| Cl-3.2.1(Sulphur Content) |
- |
0 |
|
- |
| Cl-5(Marking) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
Included w.e.f.28.03.2025 |
| 7 |
IS 12931 (2024) |
Atrazine wettable powder WP - Specification First Revision |
- |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.2(Description - IS 12931:2024) |
- |
1000 |
|
30 % discount |
| 3.3, Table 1 (i)(Atrazine Content - IS 12932:2024) |
- |
5000 |
|
30 % discount |
| 3.3, Table 1 (ii)(Material passing through 75 micron IS sieve - IS 6940:1982) |
- |
1000 |
|
30 % discount |
| 3.3, Table 1 (iii)(Suspensibility - IS 6940:1982) |
- |
1000 |
|
30 % discount |
| 3.3, Table 1 (iv)(Acidity (as H2SO4) - IS 6940:1982) |
- |
500 |
|
30 % discount |
| 3.3, Table 1 (iv)(Alkalinity (as NaOH) - IS 6940:1982) |
- |
500 |
|
30 % discount |
| 3.3, Table 1 (v)(Wettability - IS 6940:1982) |
- |
1000 |
|
30 % discount |
|
31 Dec, 2026 |
-
Included w.e.f 03.03.2025 |
| 8 |
IS 15462 (2019) |
Polymer modified bitumen (Pmb) ? specification (First Revision) |
PMB64-10 , PMB70-10 , PMB76-10 , PMB82-10 , PMB76-22 |
201000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 6.5 table 1(Loss in mass, all types) |
- |
4000 |
|
30% Discount |
| Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10) |
- |
5000 |
|
30% Discount |
| Clause 6.5 table 1(Viscosity, PMB 76-22) |
- |
0 |
|
Few parameters repeated several times |
| Clause 6.5 table 1(Viscosity, PMB 82-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 64-10) |
- |
3000 |
|
30% Discount |
| Clause 6.5 table 1(Softening point, PMB 70-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 76-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 76-22) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 82-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Flash point, all types) |
- |
4000 |
|
30% Discount |
| Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 76-22) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 82-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 64-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 70-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 76-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 76-22) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 82-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Flash point, all types) |
- |
0 |
|
- |
| Clause 6.5 table 1(Loss in mass, all types) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 76-22) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 82-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 64-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 70-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 76-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 76-22) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 82-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Flash point, all types) |
- |
0 |
|
- |
| Clause 6.5 table 1(Loss in mass, all types) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 76-22) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 82-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 64-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 70-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 76-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 76-22) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 82-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Flash point, all types) |
- |
0 |
|
- |
| Clause 6.5 table 1(Loss in mass, all types) |
- |
0 |
|
- |
| Clause 6.5 table 1(Loss in mass, all types) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 76-22) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 82-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 64-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 70-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 76-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 76-22) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 82-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Flash point, all types) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 76-22) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 82-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 64-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 70-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 76-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 76-22) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 82-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Flash point, all types) |
- |
0 |
|
- |
| Clause 6.5 table 1(Loss in mass, all types) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 76-22) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 82-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 64-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 70-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 76-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 76-22) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 82-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Flash point, all types) |
- |
0 |
|
- |
| Clause 6.5 table 1(Loss in mass, all types) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 64-10, 70-10, 76-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 76-22) |
- |
0 |
|
- |
| Clause 6.5 table 1(Viscosity, PMB 82-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 64-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 70-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 76-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 76-22) |
- |
0 |
|
- |
| Clause 6.5 table 1(Softening point, PMB 82-10) |
- |
0 |
|
- |
| Clause 6.5 table 1(Flash point, all types) |
- |
0 |
|
- |
| Clause 6.5 table 1(Loss in mass, all types) |
- |
0 |
|
- |
| Cl-6.5 (A) (i)(Softening point (R and B), °C, Min) |
- |
0 |
|
- |
| Cl-6.5 (A) (ii)(Elastic recovery of half thread in
ductilometer at 15°C, percent, Min) |
- |
3000 |
|
30% Discount |
| Cl-6.5 (A) (iii)(Flash point, COC, °C, Min) |
- |
0 |
|
- |
| Cl-6.5 (A) (iv)(Viscosity at 150°C, Pa.s, Max) |
- |
0 |
|
- |
| Cl-6.5 (A) (v)(Complex modulus (G*) divided by
Sin delta (G*/sin δ) as Min 1.0 kPa, 25
mm Plate, 1 mm Gap, at 10 rad/s, at a
temperature, °C) |
- |
40000 |
|
30% Discount |
| Cl-6.5 (A) (vi)(Phase Angle (δ), degree, Max) |
- |
10000 |
|
30% Discount |
| Cl-6.5 (A) (vii)(Separation, difference in softening point
(R&B), °C, Max) |
- |
5000 |
|
30% Discount |
| Cl-6.5 (A) (viii)(FRAASS breaking1) point, °C, Max) |
- |
6000 |
|
30% Discount |
| Cl-6.5 (B) (i)(Loss in mass, percent, Max) |
- |
0 |
|
- |
| Cl-6.5 (B) (ii)(Complex modulus (G*) divided by
Sin delta (G*/sin δ) as Min 2.2 kPa,
25 mm Plate,1 mm Gap, at 10 rad/s at a
temperature, °C) |
- |
40000 |
|
30% Discount |
| Cl-6.5 (C) (i)(Complex modulus (G*) multiplied by
Sin delta (G*sin δ) as Max 6 000 kPa,
8 mm Plate, 2 mm Gap, at 10 rad/s at a
temperature, °C) |
- |
40000 |
|
30% Discount |
| Cl-6.5 (B) (iii) (a)(Standard Traffic (S)
Jnr3.2, Max 4.5 kPa-1
Jnrdiff, Max 75 percent
Test Temperature, °C) |
- |
40000 |
|
30% Discount (MSCR Test) |
| Cl-6.5 (B) (iii) (b)(Heavy Traffic (H)
Jnr3.2, Max 2 kPa-1
Jnrdiff, Max 75 percent
Test Temperature, °C) |
- |
0 |
|
(MSCR Test) |
| Cl-6.5 (B) (iii) (c)(Very Heavy Traffic (V)
Jnr3.2, Max 1 kPa-1
Jnrdiff, Max 75 percent
Test Temperature, °C) |
- |
0 |
|
(MSCR Test) |
| Cl-6.5 (B) (iii) (d)(Extremely Heavy Traffic (E)
Jnr3.2, Max 0.5 kPa-1
Jnrdiff, Max 75 percent
Test Temperature, °C) |
- |
0 |
|
(MSCR Test) |
|
31 Dec, 2026 |
-
Included w.e.f.20.03.2025
Exclusion
Cl,4, Cl 6.1, scope restricted for standard traffic only. |
| 9 |
IS 17079 (2019) |
Rubber modified bitumen (Rmb) ? specification |
Type A-NRMB70 , NRMB40 , & Type B CRMB 55 , CRMB 60 |
115000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1(Material and Manufacture) |
- |
7000 |
|
30% Discount |
| 6.2(Homogeneity) |
- |
2000 |
|
30% Discount |
| 6.4(De-mixing of Modifier) |
- |
2000 |
|
30% Discount |
| "clause no 6.5 table no-1 sl no-1"("Penetration at
25°C
") |
- |
2000 |
|
30% Discount |
| "clause no 6.5 table no-1 sl n0-2"(Softening point (R and B)) |
- |
2000 |
|
30% Discount |
| "clause no 6.5 table no-1 sl no-3"(Flash point, COC) |
- |
2000 |
|
30% Discount |
| "clause no 6.5 table no-1 sl no-4"("Elastic recovery of
half thread in
ductilometer at 15°C") |
- |
2000 |
|
30% Discount |
| "clause no 6.5 table no-1 sl no-5"("Complex modulus
as (G*/Sin) as Min
1.0 kPa at 10 rad/s") |
- |
40000 |
|
30% Discount |
| "clause no 6.5 table no-1 sl no-6"(Separation, difference in softening point (R&B)) |
- |
5000 |
|
30% Discount |
| "clause no 6.5 table no-1 sl no-7"(Viscosity at 150°C) |
- |
3000 |
|
30% Discount |
| "clause no 6.5 table no-2 sl no-1"(Loss in mass) |
- |
2000 |
|
30% Discount |
| "clause no 6.5 table no-2 sl no-2"(Change in Softening Point) |
- |
2000 |
|
30% Discount |
| "clause no 6.5 table no-2 sl no-3"(Reduction in penetration of residue at 25°C) |
- |
2000 |
|
30% Discount |
| "clause no 6.5 table no-2 sl no-4"(Elastic recovery of half thread in ductilometer at 25°C, percent) |
- |
2000 |
|
30% Discount |
| "clause no 6.5 table no-2 sl no-5"(Complex modulus as (G*/Sin) as Min 2.2 kPa at 10 rad/s) |
- |
40000 |
|
30% Discount |
| 6.1(Material and Manufacture) |
- |
0 |
|
- |
| 6.2(Homogeneity) |
- |
0 |
|
- |
| 6.4(De-mixing of Modifier) |
- |
0 |
|
- |
| "clause no 6.5 table no-1 sl no-1"("Penetration at
25°C
") |
- |
0 |
|
- |
| "clause no 6.5 table no-1 sl n0-2"(Softening point (R and B)) |
- |
0 |
|
- |
| "clause no 6.5 table no-1 sl no-3"(Flash point, COC) |
- |
0 |
|
- |
| "clause no 6.5 table no-1 sl no-4"("Elastic recovery of
half thread in
ductilometer at 15°C") |
- |
0 |
|
- |
| "clause no 6.5 table no-1 sl no-5"("Complex modulus
as (G*/Sin) as Min
1.0 kPa at 10 rad/s") |
- |
0 |
|
- |
| "clause no 6.5 table no-1 sl no-6"(Separation, difference in softening point (R&B)) |
- |
0 |
|
- |
| "clause no 6.5 table no-1 sl no-7"(Viscosity at 150°C) |
- |
0 |
|
- |
| "clause no 6.5 table no-2 sl no-1"(Loss in mass) |
- |
0 |
|
- |
| "clause no 6.5 table no-2 sl no-2"(Change in Softening Point) |
- |
0 |
|
- |
| "clause no 6.5 table no-2 sl no-3"(Reduction in penetration of residue at 25°C) |
- |
0 |
|
- |
| "clause no 6.5 table no-2 sl no-4"(Elastic recovery of half thread in ductilometer at 25°C, percent) |
- |
0 |
|
- |
| "clause no 6.5 table no-2 sl no-5"(Complex modulus as (G*/Sin) as Min 2.2 kPa at 10 rad/s) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
Included w.e.f 03.03.2025
Exclusion : Cl 6.3 Mineral Matter |
| 10 |
IS 16208 (2015) |
Textiles - High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packaging 10 kg, 15 kg, 20 kg, 25 kg and 30 kg foodgrains - Specification |
Type-I , II ,III , IV , V |
39550 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3(TYPES) |
- |
0 |
|
- |
| 4.1(Raw Material) |
- |
15000 |
|
30% Discount |
| 4.2(Tapes – Width
IS 6192 and IS 11197) |
- |
500 |
|
30% Discount |
| 4.2(Tapes – Linear Density
) |
- |
1500 |
|
30% Discount |
| 4.2(Construction) |
- |
1000 |
|
30% Discount |
| 4.3(Sacks) |
- |
0 |
|
- |
| 4.3.1(Bottom Seam) |
- |
0 |
|
- |
| 4.3.1( The two rows of stitches shall be separated from each other) |
- |
0 |
|
- |
| 4.3.1( The outer stitch) |
- |
0 |
|
- |
| 4.3.1( The stitching shall be done with double fold over seam to a depth ) |
- |
0 |
|
- |
| 4.3.1(Stitches pass through a minimum of six layers of the fabric. ) |
- |
1500 |
|
30% Discount |
| 4.3.1(The number of stitches/dm) |
- |
1000 |
|
30% Discount |
| 4.3.2(Mouth) |
- |
0 |
|
- |
| 4.4 and Table 1 i(Capacity) |
- |
0 |
|
- |
| 5.2 and Table 1 ii a(Dimensions Inside Length) |
- |
1000 |
|
30% Discount |
| 5.2 and Table 1 ii b(Dimensions Inside Width) |
- |
0 |
|
- |
| 5.2 and Table 1 iii(Ends per dm ) |
- |
0 |
|
- |
| 5.2 and Table 1 iv(Picks per dm ) |
- |
1000 |
|
30% Discount |
| 5.1 and Table 1 v(Mass of sack ) |
- |
1500 |
|
30% Discount |
| 5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise ) |
- |
5000 |
|
30% Discount |
| 5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise ) |
- |
0 |
|
- |
| 5.2 and Table 1 vi(Breaking strength of bottom seam ) |
- |
2500 |
|
30% Discount |
| 5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise) |
- |
2500 |
|
30% Discount |
| 5.2 and Table 1 viii b(Elongation at break of fabric Widthwise ) |
- |
0 |
|
- |
| 5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
20000 |
|
30% Discount |
| 5.2 and Table 1 x(Ash content ) |
- |
1000 |
|
30% Discount |
| 4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2) |
- |
1500 |
|
30% Discount |
| 3(TYPES) |
- |
0 |
|
- |
| 4.1(Raw Material) |
- |
0 |
|
- |
| 4.2(Tapes – Width
IS 6192 and IS 11197) |
- |
0 |
|
- |
| 4.2(Tapes – Linear Density
) |
- |
0 |
|
- |
| 4.2(Construction) |
- |
0 |
|
- |
| 4.3(Sacks) |
- |
0 |
|
- |
| 4.3.1(Bottom Seam) |
- |
0 |
|
- |
| 4.3.1( The two rows of stitches shall be separated from each other) |
- |
0 |
|
- |
| 4.3.1( The outer stitch) |
- |
0 |
|
- |
| 4.3.1( The stitching shall be done with double fold over seam to a depth ) |
- |
0 |
|
- |
| 4.3.1(Stitches pass through a minimum of six layers of the fabric. ) |
- |
0 |
|
- |
| 4.3.1(The number of stitches/dm) |
- |
0 |
|
- |
| 4.3.2(Mouth) |
- |
0 |
|
- |
| 4.4 and Table 1 i(Capacity) |
- |
0 |
|
- |
| 5.2 and Table 1 ii a(Dimensions Inside Length) |
- |
0 |
|
- |
| 5.2 and Table 1 ii b(Dimensions Inside Width) |
- |
0 |
|
- |
| 5.2 and Table 1 iii(Ends per dm ) |
- |
0 |
|
- |
| 5.2 and Table 1 iv(Picks per dm ) |
- |
0 |
|
- |
| 5.1 and Table 1 v(Mass of sack ) |
- |
0 |
|
- |
| 5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise ) |
- |
0 |
|
- |
| 5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise ) |
- |
0 |
|
- |
| 5.2 and Table 1 vi(Breaking strength of bottom seam ) |
- |
0 |
|
- |
| 5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise) |
- |
0 |
|
- |
| 5.2 and Table 1 viii b(Elongation at break of fabric Widthwise ) |
- |
0 |
|
- |
| 5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
0 |
|
- |
| 5.2 and Table 1 x(Ash content ) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
Included w.e.f 10.02.2025 |
| 11 |
IS 14968 (2015) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision) |
Type - I & Type II |
68500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3(TYPES) |
- |
0 |
|
- |
| 4.1(Raw Material) |
- |
15000 |
|
30% Discount |
| 4.2(Tapes – Width
IS 6192 and IS 11197) |
- |
500 |
|
30% Discount |
| 4.2(Tapes – Linear Density
) |
- |
1500 |
|
30% Discount |
| 4.2(Construction) |
- |
1000 |
|
30% Discount |
| 4.3(Sacks) |
- |
0 |
|
- |
| 4.3.1(Bottom Seam) |
- |
0 |
|
- |
| 4.3.1(The two rows of stitches shall be separated from each other) |
- |
0 |
|
- |
| 4.3.1( The outer stitch) |
- |
0 |
|
- |
| 4.3.1( The stitching shall be done with double fold over seam to a depth ) |
- |
0 |
|
- |
| 4.3.1(Stitches pass through a minimum of six layers of the fabric. ) |
- |
500 |
|
30% Discount |
| 4.3.1(stitches/dm) |
- |
1000 |
|
30% Discount |
| 4.3.2(Mouth) |
- |
0 |
|
- |
| 4.4(Liner
IS 10146 or IS 10910.) |
- |
10000 |
|
30% Discount |
| 4.4(Mass of the loose liner ) |
- |
1000 |
|
30% Discount |
| 4.4(Width of the loose liner) |
- |
0 |
|
- |
| 4.4(Length of the line) |
- |
0 |
|
- |
| 4.4(Bottom seam of the loose liner) |
- |
0 |
|
- |
| 4.4.1(Liner) |
- |
500 |
|
30% Discount |
| 4.5 and Table 1 i(Capacity) |
- |
0 |
|
- |
| 5.2 and Table 1 ii a(Dimensions Inside Length) |
- |
1000 |
|
30% Discount |
| 5.2 and Table 1 ii b(Dimensions Inside Width) |
- |
0 |
|
- |
| 5.2 and Table 1 iii(Ends per dm ) |
- |
500 |
|
30% Discount |
| 5.2 and Table 1 iv(Picks per dm ) |
- |
500 |
|
30% Discount |
| 5.1 and Table 1 v a(Mass of unlaminated sack
IS 1964) |
- |
1500 |
|
30% Discount |
| 5.1 and Table 1 v b(Mass of unlaminated sack with liner
) |
- |
0 |
|
- |
| 5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise
IS 1969 (Part 1)) |
- |
2500 |
|
30% Discount |
| 5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise
IS 1969 (Part 1)) |
- |
2500 |
|
30% Discount |
| 5.2 and Table 1 vi(Breaking strength of bottom seam
IS 9030
) |
- |
2500 |
|
30% Discount |
| 5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise
IS 1969 (Part 1)) |
- |
1500 |
|
30% Discount |
| 5.2 and Table 1 viii b(Elongation at break of fabric Widthwise
IS 1969 (Part 1)) |
- |
1500 |
|
30% Discount |
| 5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
20000 |
|
30% Discount |
| 5.2 and Table 1 x(Ash content ) |
- |
1000 |
|
30% Discount |
| 3(TYPES) |
- |
0 |
|
- |
| 4.1(Raw Material) |
- |
0 |
|
- |
| 4.2(Tapes – Width
IS 6192 and IS 11197) |
- |
0 |
|
- |
| 4.2(Tapes – Linear Density
) |
- |
0 |
|
- |
| 4.2(Construction) |
- |
0 |
|
- |
| 4.3(Sacks) |
- |
0 |
|
- |
| 4.3.1(Bottom Seam) |
- |
0 |
|
- |
| 4.3.1(The two rows of stitches shall be separated from each other) |
- |
0 |
|
- |
| 4.3.1( The outer stitch) |
- |
0 |
|
- |
| 4.3.1( The stitching shall be done with double fold over seam to a depth ) |
- |
0 |
|
- |
| 4.3.1(Stitches pass through a minimum of six layers of the fabric. ) |
- |
0 |
|
- |
| 4.3.1(stitches/dm) |
- |
0 |
|
- |
| 4.3.2(Mouth) |
- |
0 |
|
- |
| 4.4(Liner
IS 10146 or IS 10910.) |
- |
0 |
|
- |
| 4.4(Mass of the loose liner ) |
- |
0 |
|
- |
| 4.4(Width of the loose liner) |
- |
0 |
|
- |
| 4.4(Length of the line) |
- |
0 |
|
- |
| 4.4(Bottom seam of the loose liner) |
- |
0 |
|
- |
| 4.4.1(Liner) |
- |
0 |
|
- |
| 4.5 and Table 1 i(Capacity) |
- |
0 |
|
- |
| 5.2 and Table 1 ii a(Dimensions Inside Length) |
- |
0 |
|
- |
| 5.2 and Table 1 ii b(Dimensions Inside Width) |
- |
0 |
|
- |
| 5.2 and Table 1 iii(Ends per dm ) |
- |
0 |
|
- |
| 5.2 and Table 1 iv(Picks per dm ) |
- |
0 |
|
- |
| 5.1 and Table 1 v a(Mass of unlaminated sack
IS 1964) |
- |
0 |
|
- |
| 5.1 and Table 1 v b(Mass of unlaminated sack with liner
) |
- |
0 |
|
- |
| 5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise
IS 1969 (Part 1)) |
- |
0 |
|
- |
| 5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise
IS 1969 (Part 1)) |
- |
0 |
|
- |
| 5.2 and Table 1 vi(Breaking strength of bottom seam
IS 9030
) |
- |
0 |
|
- |
| 5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise
IS 1969 (Part 1)) |
- |
0 |
|
- |
| 5.2 and Table 1 viii b(Elongation at break of fabric Widthwise
IS 1969 (Part 1)) |
- |
0 |
|
- |
| 5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
0 |
|
- |
| 5.2 and Table 1 x(Ash content ) |
- |
0 |
|
- |
| 4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2) |
- |
1500 |
|
30% Discount |
| 5.3(UV Resistance) |
- |
0 |
|
- |
| Cl-4.4 (Amendment-3)(Thickness of liner) |
- |
1000 |
|
30% Discount |
| 3(TYPES) |
- |
0 |
|
- |
| 4.1(Raw Material) |
- |
0 |
|
- |
| 4.2(Tapes – Width
IS 6192 and IS 11197) |
- |
0 |
|
- |
| 4.2(Tapes – Linear Density
) |
- |
0 |
|
- |
| 4.2(Construction) |
- |
0 |
|
- |
| 4.3(Sacks) |
- |
0 |
|
- |
| 4.3.1(Bottom Seam) |
- |
0 |
|
- |
| 4.3.1(The two rows of stitches shall be separated from each other) |
- |
0 |
|
- |
| 4.3.1( The outer stitch) |
- |
0 |
|
- |
| 4.3.1( The stitching shall be done with double fold over seam to a depth ) |
- |
0 |
|
- |
| 4.3.1(Stitches pass through a minimum of six layers of the fabric. ) |
- |
0 |
|
- |
| 4.3.1(stitches/dm) |
- |
0 |
|
- |
| 4.3.2(Mouth) |
- |
0 |
|
- |
| 4.4(Liner
IS 10146 or IS 10910.) |
- |
0 |
|
- |
| 4.4(Mass of the loose liner ) |
- |
0 |
|
- |
| 4.4(Width of the loose liner) |
- |
0 |
|
- |
| 4.4(Length of the line) |
- |
0 |
|
- |
| 4.4(Bottom seam of the loose liner) |
- |
0 |
|
- |
| 4.4.1(Liner) |
- |
0 |
|
- |
| 4.5 and Table 1 i(Capacity) |
- |
0 |
|
- |
| 5.2 and Table 1 ii a(Dimensions Inside Length) |
- |
0 |
|
- |
| 5.2 and Table 1 ii b(Dimensions Inside Width) |
- |
0 |
|
- |
| 5.2 and Table 1 iii(Ends per dm ) |
- |
0 |
|
- |
| 5.2 and Table 1 iv(Picks per dm ) |
- |
0 |
|
- |
| 5.1 and Table 1 v a(Mass of unlaminated sack
IS 1964) |
- |
0 |
|
- |
| 5.1 and Table 1 v b(Mass of unlaminated sack with liner
) |
- |
0 |
|
- |
| 5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise
IS 1969 (Part 1)) |
- |
0 |
|
- |
| 5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise
IS 1969 (Part 1)) |
- |
0 |
|
- |
| 5.2 and Table 1 vi(Breaking strength of bottom seam
IS 9030
) |
- |
0 |
|
- |
| 5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise
IS 1969 (Part 1)) |
- |
0 |
|
- |
| 5.2 and Table 1 viii b(Elongation at break of fabric Widthwise
IS 1969 (Part 1)) |
- |
0 |
|
- |
| 5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
0 |
|
- |
| 5.2 and Table 1 x(Ash content ) |
- |
0 |
|
- |
| 3(TYPES) |
- |
0 |
|
- |
| 4.1(Raw Material) |
- |
0 |
|
- |
| 4.2(Tapes – Width
IS 6192 and IS 11197) |
- |
0 |
|
- |
| 4.2(Tapes – Linear Density
) |
- |
0 |
|
- |
| 4.2(Construction) |
- |
0 |
|
- |
| 4.3(Sacks) |
- |
0 |
|
- |
| 4.3.1(Bottom Seam) |
- |
0 |
|
- |
| 4.3.1(The two rows of stitches shall be separated from each other) |
- |
0 |
|
- |
| 4.3.1( The outer stitch) |
- |
0 |
|
- |
| 4.3.1( The stitching shall be done with double fold over seam to a depth ) |
- |
0 |
|
- |
| 4.3.1(Stitches pass through a minimum of six layers of the fabric. ) |
- |
0 |
|
- |
| 4.3.1(stitches/dm) |
- |
0 |
|
- |
| 4.3.2(Mouth) |
- |
0 |
|
- |
| 4.4(Liner
IS 10146 or IS 10910.) |
- |
0 |
|
- |
| 4.4(Mass of the loose liner ) |
- |
0 |
|
- |
| 4.4(Width of the loose liner) |
- |
0 |
|
- |
| 4.4(Length of the line) |
- |
0 |
|
- |
| 4.4(Bottom seam of the loose liner) |
- |
0 |
|
- |
| 4.4.1(Liner) |
- |
0 |
|
- |
| 4.5 and Table 1 i(Capacity) |
- |
0 |
|
- |
| 5.2 and Table 1 ii a(Dimensions Inside Length) |
- |
0 |
|
- |
| 5.2 and Table 1 ii b(Dimensions Inside Width) |
- |
0 |
|
- |
| 5.2 and Table 1 iii(Ends per dm ) |
- |
0 |
|
- |
| 5.2 and Table 1 iv(Picks per dm ) |
- |
0 |
|
- |
| 5.1 and Table 1 v a(Mass of unlaminated sack
IS 1964) |
- |
0 |
|
- |
| 5.1 and Table 1 v b(Mass of unlaminated sack with liner
) |
- |
0 |
|
- |
| 5.2 and Table 1 vi a(Average breaking strength of fabric Lengthwise
IS 1969 (Part 1)) |
- |
0 |
|
- |
| 5.2 and Table 1 vi b(Average breaking strength of fabric Widthwise
IS 1969 (Part 1)) |
- |
0 |
|
- |
| 5.2 and Table 1 vi(Breaking strength of bottom seam
IS 9030
) |
- |
0 |
|
- |
| 5.2 and Table 1 viii a(Elongation at break of fabric Lengthwise
IS 1969 (Part 1)) |
- |
0 |
|
- |
| 5.2 and Table 1 viii b(Elongation at break of fabric Widthwise
IS 1969 (Part 1)) |
- |
0 |
|
- |
| 5.2 and Table 1 ix(Average breaking strength and elongation at break of UV stabilized HDPE/PP fabric after been exposed to UV radiation and weathering ) |
- |
0 |
|
- |
| 5.2 and Table 1 x(Ash content ) |
- |
0 |
|
- |
| 4.2 (Mesh size and weight in g/cm2) (amendment 3)(Mesh size and weight in g/cm2) |
- |
0 |
|
- |
| 5.3(UV Resistance) |
- |
0 |
|
- |
| Cl-4.4 (Amendment-3)(Thickness of liner) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
Included w.e.f 10.02.2025 |
| 12 |
IS 12823 (2015) |
Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision ) |
Grade-1 & 2 , Type - I , II , III , IV |
59000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 4(Grades & Types) |
- |
0 |
|
- |
| Cl 6(Manufacture) |
- |
0 |
|
- |
| Cl 7(Finish) |
- |
0 |
|
- |
| Cl 8(Dimensions & Tolerances) |
- |
1000 |
|
30% Discount |
| Cl 10.2(Test For Density) |
- |
1500 |
|
30% Discount |
| Cl 10.3(Test For Moisture Content) |
- |
1500 |
|
30% Discount |
| Cl 10.4(For Water AbsorptionTest ) |
- |
3000 |
|
30% Discount |
| Cl 10.5(For Swelling in water Test ) |
- |
1500 |
|
30% Discount |
| Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture) |
- |
5000 |
|
30% Discount |
| Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface) |
- |
4000 |
|
30% Discount |
| Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test) |
- |
4000 |
|
30% Discount |
| Cl 10.9(Test For Screw Withdrawal Strength) |
- |
2000 |
|
30% Discount |
| Cl 10.10 & Annex C( Test For Abrasion Resistance) |
- |
5000 |
|
30% Discount |
| Cl 10.11 & Annex D( Test For Resistance to Steam) |
- |
1500 |
|
30% Discount |
| Cl 10.12 & Annex E( Test For Crack Resistance) |
- |
2500 |
|
30% Discount |
| Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn) |
- |
1500 |
|
30% Discount |
| Cl 10.14 & Annex G( Test For Resistance to Stain) |
- |
10000 |
|
30% Discount |
| Cl 4(Grades & Types) |
- |
0 |
|
- |
| Cl 6(Manufacture) |
- |
0 |
|
- |
| Cl 7(Finish) |
- |
0 |
|
- |
| Cl 8(Dimensions & Tolerances) |
- |
0 |
|
- |
| Cl 10.2(Test For Density) |
- |
0 |
|
- |
| Cl 10.3(Test For Moisture Content) |
- |
0 |
|
- |
| Cl 10.4(For Water AbsorptionTest ) |
- |
0 |
|
- |
| Cl 10.5(For Swelling in water Test ) |
- |
0 |
|
- |
| Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture) |
- |
0 |
|
- |
| Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface) |
- |
0 |
|
- |
| Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test) |
- |
0 |
|
- |
| Cl 10.9(Test For Screw Withdrawal Strength) |
- |
0 |
|
- |
| Cl 10.10 & Annex C( Test For Abrasion Resistance) |
- |
0 |
|
- |
| Cl 10.11 & Annex D( Test For Resistance to Steam) |
- |
0 |
|
- |
| Cl 10.12 & Annex E( Test For Crack Resistance) |
- |
0 |
|
- |
| Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn) |
- |
0 |
|
- |
| Cl 10.14 & Annex G( Test For Resistance to Stain) |
- |
0 |
|
- |
| Cl 10.14 & Annex G( Test For Resistance to Stain) |
- |
0 |
|
- |
| Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn) |
- |
0 |
|
- |
| Cl 10.12 & Annex E( Test For Crack Resistance) |
- |
0 |
|
- |
| Cl 10.11 & Annex D( Test For Resistance to Steam) |
- |
0 |
|
- |
| Cl 10.10 & Annex C( Test For Abrasion Resistance) |
- |
0 |
|
- |
| Cl 10.9(Test For Screw Withdrawal Strength) |
- |
0 |
|
- |
| Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test) |
- |
0 |
|
- |
| Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface) |
- |
0 |
|
- |
| Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture) |
- |
0 |
|
- |
| Cl 10.5(For Swelling in water Test ) |
- |
0 |
|
- |
| Cl 10.4(For Water AbsorptionTest ) |
- |
0 |
|
- |
| Cl 10.3(Test For Moisture Content) |
- |
0 |
|
- |
| Cl 10.2(Test For Density) |
- |
0 |
|
- |
| Cl 8(Dimensions & Tolerances) |
- |
0 |
|
- |
| Cl 7(Finish) |
- |
0 |
|
- |
| Cl 6(Manufacture) |
- |
0 |
|
- |
| Cl 4(Grades & Types) |
- |
0 |
|
- |
| Cl 10.15(Test for Formaldehyde Content/Emission) |
- |
15000 |
|
30% Discount |
| Cl-11(ADDITIONAL REQUIREMENTS FOR
ECO-MARK) |
- |
0 |
|
- |
| Cl 4(Grades & Types) |
- |
0 |
|
- |
| Cl 6(Manufacture) |
- |
0 |
|
- |
| Cl 7(Finish) |
- |
0 |
|
- |
| Cl 8(Dimensions & Tolerances) |
- |
0 |
|
- |
| Cl 10.2(Test For Density) |
- |
0 |
|
- |
| Cl 10.3(Test For Moisture Content) |
- |
0 |
|
- |
| Cl 10.4(For Water AbsorptionTest ) |
- |
0 |
|
- |
| Cl 10.5(For Swelling in water Test ) |
- |
0 |
|
- |
| Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture) |
- |
0 |
|
- |
| Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface) |
- |
0 |
|
- |
| Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test) |
- |
0 |
|
- |
| Cl 10.9(Test For Screw Withdrawal Strength) |
- |
0 |
|
- |
| Cl 10.10 & Annex C( Test For Abrasion Resistance) |
- |
0 |
|
- |
| Cl 10.11 & Annex D( Test For Resistance to Steam) |
- |
0 |
|
- |
| Cl 10.12 & Annex E( Test For Crack Resistance) |
- |
0 |
|
- |
| Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn) |
- |
0 |
|
- |
| Cl 10.14 & Annex G( Test For Resistance to Stain) |
- |
0 |
|
- |
| Cl 4(Grades & Types) |
- |
0 |
|
- |
| Cl 6(Manufacture) |
- |
0 |
|
- |
| Cl 7(Finish) |
- |
0 |
|
- |
| Cl 8(Dimensions & Tolerances) |
- |
0 |
|
- |
| Cl 10.2(Test For Density) |
- |
0 |
|
- |
| Cl 10.3(Test For Moisture Content) |
- |
0 |
|
- |
| Cl 10.4(For Water AbsorptionTest ) |
- |
0 |
|
- |
| Cl 10.5(For Swelling in water Test ) |
- |
0 |
|
- |
| Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture) |
- |
0 |
|
- |
| Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface) |
- |
0 |
|
- |
| Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test) |
- |
0 |
|
- |
| Cl 10.9(Test For Screw Withdrawal Strength) |
- |
0 |
|
- |
| Cl 10.10 & Annex C( Test For Abrasion Resistance) |
- |
0 |
|
- |
| Cl 10.11 & Annex D( Test For Resistance to Steam) |
- |
0 |
|
- |
| Cl 10.12 & Annex E( Test For Crack Resistance) |
- |
0 |
|
- |
| Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn) |
- |
0 |
|
- |
| Cl 10.14 & Annex G( Test For Resistance to Stain) |
- |
0 |
|
- |
| Cl 10.14 & Annex G( Test For Resistance to Stain) |
- |
0 |
|
- |
| Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn) |
- |
0 |
|
- |
| Cl 10.12 & Annex E( Test For Crack Resistance) |
- |
0 |
|
- |
| Cl 10.11 & Annex D( Test For Resistance to Steam) |
- |
0 |
|
- |
| Cl 10.10 & Annex C( Test For Abrasion Resistance) |
- |
0 |
|
- |
| Cl 10.9(Test For Screw Withdrawal Strength) |
- |
0 |
|
- |
| Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test) |
- |
0 |
|
- |
| Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface) |
- |
0 |
|
- |
| Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture) |
- |
0 |
|
- |
| Cl 10.5(For Swelling in water Test ) |
- |
0 |
|
- |
| Cl 10.4(For Water AbsorptionTest ) |
- |
0 |
|
- |
| Cl 10.3(Test For Moisture Content) |
- |
0 |
|
- |
| Cl 10.2(Test For Density) |
- |
0 |
|
- |
| Cl 8(Dimensions & Tolerances) |
- |
0 |
|
- |
| Cl 7(Finish) |
- |
0 |
|
- |
| Cl 6(Manufacture) |
- |
0 |
|
- |
| Cl 4(Grades & Types) |
- |
0 |
|
- |
| Cl 10.15(Test for Formaldehyde Content/Emission) |
- |
0 |
|
- |
| Cl-11(ADDITIONAL REQUIREMENTS FOR
ECO-MARK) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
Included w.e.f. 31.12.2024 |
| 13 |
IS 15328 (2003) |
Unplasticized Non-Pressure Polyvinyl Chloride ( PVC -U ) Pipes for use in Underground Drainage and Sewerage Systems - |
- |
36750 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1,6.1.1
IS 12235 (Part 1)
Table 1(Dimension of Pipes:
Mean outside Diameter, dem) |
- |
1500 |
|
30% Discount |
| 6.1,6.1.1
IS 12235 (Part 1)
Table 1(Outside Diameter at any point, de) |
- |
0 |
|
- |
| 6.1.2
IS 4985
Table 2(Wall Thickness, e ) |
- |
0 |
|
- |
| 6.1.4,
Table 3(Dimensions of integral sockets and spigot ends :-
a) Elastomeric Sealing Ringsockets and
spigot ends
i)Meean inside dia. Of socket, dsm) |
- |
0 |
|
- |
| 6.1.4,
Table 3(ii) Min. depth of engagement, A. ) |
- |
0 |
|
- |
| 6.1.4
Table 3(iii) Depth of sealing Zone C ) |
- |
0 |
|
- |
| 6.1.4,
Table 3(iv) Length of spigot, l1) |
- |
0 |
|
- |
| 6.1.4,
Table 3(v) Chamfer length, H : Approx.) |
- |
0 |
|
- |
| 6.1.4.1
(wall thickness of sockets
e2 min=0.9e
) |
- |
0 |
|
- |
| 6.1.4.1
(e3min=0.75e) |
- |
0 |
|
- |
| 6.1.4,
Table 4(b) Solvent Cement Joint sockets and
spigot ends
i) Mean inside dia. Of socket, dsm) |
- |
0 |
|
- |
| 6.1.4,
Table 4(ii) Length of Solvent Cement socket, l2 ) |
- |
0 |
|
- |
| 6.1.4,
Table 4(iii) Length of spigot, l1, 100 mm Min.) |
- |
0 |
|
- |
| 6.1.4,
Table 4(iv) Chamfer length, H, 7 mm Approx.) |
- |
0 |
|
- |
| 7(Physical characteristics
) |
- |
1500 |
|
30% Discount |
| 7.1(Appearance:-
) |
- |
0 |
|
- |
| 7.1(Appearance:-
) |
- |
0 |
|
- |
| 7.2(Colour ) |
- |
0 |
|
- |
| 7.3
IS 1223S
( Part 2)(Vicat Softening Temperature
When determined according to IS 1223S
( Part 2), shall not be lessthan 79°C.) |
- |
2500 |
|
30% Discount |
| 7.4
IS 1223S ( Part 5)(Longitudinal Reversion:
When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent.
The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.) |
- |
2500 |
|
30% Discount |
| 8(MECHANICAL CHARACTERISTICS) |
- |
0 |
|
- |
| 8.1
Annex B(Resistance to External Blows at 0ºC:
When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.) |
- |
2500 |
|
30% Discount |
| 8.2
Annex C
Table 5(Ring Stiffness:
When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5) |
- |
1500 |
|
30% Discount |
| 8.3
IS 12235 ( Part 8/ Sec 1 )
Table 6(Resistance to internal Hydrostatic Pressure(Type Test)
a) Acceptance Test:(1h at 27 0 C)
) |
- |
5000 |
|
30% Discount |
| 8.3
IS 12235 ( Part 8/ Sec 1 )
Table 6(b) Type Test:(1000h at 60 0 C)
) |
- |
15000 |
|
30% Discount |
| 9
9.1, IS 5382(JOINTS:-
a) Elastomeric Sealing Rings) |
- |
1000 |
|
30% Discount |
| 9.2
IS 14182(b) Solvent cement) |
- |
1500 |
|
30% Discount |
| 10(Performance requirements) |
- |
1000 |
|
30% Discount |
| 10.1.1
Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints) |
- |
5000 |
|
30% Discount |
| 10.1.2
Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints) |
- |
5000 |
|
30% Discount |
| 10.2.1(Internal hydrostatic pressure test for solvent cemented Joints) |
- |
0 |
|
- |
| 10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints) |
- |
0 |
|
- |
| '7.5 (amdt.7)(Effect on Water (Type test)) |
- |
5000 |
|
30% Discount |
| 5.3(Qualitative) |
- |
0 |
|
- |
| 12(Marking) |
- |
0 |
|
- |
| 5,5.2(Composition of the material
The material shall contain a minimum of
0.3 percent of rutile grade titanium dioxide.) |
- |
2000 |
|
30% Discount |
| 6.1,6.1.1
IS 12235 (Part 1)
Table 1(Dimension of Pipes:
Mean outside Diameter, dem) |
- |
0 |
|
- |
| 6.1,6.1.1
IS 12235 (Part 1)
Table 1(Outside Diameter at any point, de) |
- |
0 |
|
- |
| 6.1.2
IS 4985
Table 2(Wall Thickness, e ) |
- |
0 |
|
- |
| 6.1.4,
Table 3(Dimensions of integral sockets and spigot ends :-
a) Elastomeric Sealing Ringsockets and
spigot ends
i)Meean inside dia. Of socket, dsm) |
- |
0 |
|
- |
| 6.1.4,
Table 3(ii) Min. depth of engagement, A. ) |
- |
0 |
|
- |
| 6.1.4
Table 3(iii) Depth of sealing Zone C ) |
- |
0 |
|
- |
| 6.1.4,
Table 3(iv) Length of spigot, l1) |
- |
0 |
|
- |
| 6.1.4,
Table 3(v) Chamfer length, H : Approx.) |
- |
0 |
|
- |
| 6.1.4.1
(wall thickness of sockets
e2 min=0.9e
) |
- |
0 |
|
- |
| 6.1.4.1
(e3min=0.75e) |
- |
0 |
|
- |
| 6.1.4,
Table 4(b) Solvent Cement Joint sockets and
spigot ends
i) Mean inside dia. Of socket, dsm) |
- |
0 |
|
- |
| 6.1.4,
Table 4(ii) Length of Solvent Cement socket, l2 ) |
- |
0 |
|
- |
| 6.1.4,
Table 4(iii) Length of spigot, l1, 100 mm Min.) |
- |
0 |
|
- |
| 6.1.4,
Table 4(iv) Chamfer length, H, 7 mm Approx.) |
- |
0 |
|
- |
| 7(Physical characteristics
) |
- |
0 |
|
- |
| 7.1(Appearance:-
) |
- |
0 |
|
- |
| 7.1(Appearance:-
) |
- |
0 |
|
- |
| 7.2(Colour ) |
- |
0 |
|
- |
| 7.3
IS 1223S
( Part 2)(Vicat Softening Temperature
When determined according to IS 1223S
( Part 2), shall not be lessthan 79°C.) |
- |
0 |
|
- |
| 7.4
IS 1223S ( Part 5)(Longitudinal Reversion:
When tested according to the methodprescribed in IS 1223S ( Part 5), shall not exceed ± 5 percent.
The pipe shall not exhibit any blisters, bubbles or crackson completion of the test.) |
- |
0 |
|
- |
| 8(MECHANICAL CHARACTERISTICS) |
- |
0 |
|
- |
| 8.1
Annex B(Resistance to External Blows at 0ºC:
When tested according to the method prescribed in Annex B, the pipes hall have a true impact rate of not more than I0 percent.) |
- |
0 |
|
- |
| 8.2
Annex C
Table 5(Ring Stiffness:
When tested according to the method described in Annex C,the ring stiffness of the pipe shall be as stated in Table 5) |
- |
0 |
|
- |
| 8.3
IS 12235 ( Part 8/ Sec 1 )
Table 6(Resistance to internal Hydrostatic Pressure(Type Test)
a) Acceptance Test:(1h at 27 0 C)
) |
- |
0 |
|
- |
| 8.3
IS 12235 ( Part 8/ Sec 1 )
Table 6(b) Type Test:(1000h at 60 0 C)
) |
- |
0 |
|
- |
| 9
9.1, IS 5382(JOINTS:-
a) Elastomeric Sealing Rings) |
- |
0 |
|
- |
| 9.2
IS 14182(b) Solvent cement) |
- |
0 |
|
- |
| 10(Performance requirements) |
- |
0 |
|
- |
| 10.1.1
Annex D(Internal hydrostatic pressure test for elastomeric sealing ring joints) |
- |
0 |
|
- |
| 10.1.2
Annex E(Internal negative hydrostatic pressure test (internal vacuum) for elastomeric sealing ring joints) |
- |
0 |
|
- |
| 10.2.1(Internal hydrostatic pressure test for solvent cemented Joints) |
- |
0 |
|
- |
| 10.2.2(Internal negative hydrostatic pressure test (internal vacuum)for solvent cemented joints) |
- |
0 |
|
- |
| '7.5 (amdt.7)(Effect on Water (Type test)) |
- |
0 |
|
- |
| 5.3(Qualitative) |
- |
0 |
|
- |
| 12(Marking) |
- |
0 |
|
- |
| 5,5.2(Composition of the material
The material shall contain a minimum of
0.3 percent of rutile grade titanium dioxide.) |
- |
0 |
|
- |
| 6.1.3 (Length of Pipe) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
Included.w.e.f.13.01.2025 |
| 14 |
IS 13592 (2013) |
Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System |
PVC U Pipe |
25550 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.5(Surface colour of the pipes shall be dark shade of grey) |
- |
1000 |
|
30% Discount |
| Cl6.3(The composition shall be based on PVC resin
having a K-value of 64 or greater when tested in
accordance with IS 4669) |
- |
5000 |
|
30% Discount |
| Cl.7.1(Mean outside diameter, outside diameter at any point
for Type A and Type B pipes
manufactured plain or with socket shall be as given in
Table 1. Dimensions shall be measured according to
the method given in IS 12235 (Part 1).) |
- |
1500 |
|
30% Discount |
| Cl.7.1( outside diameter at any point
for Type A and Type B pipes
manufactured plain or with socket shall be as given in
Table 1. Dimensions shall be measured according to
the method given in IS 12235 (Part 1).) |
- |
0 |
|
- |
| Cl.7.1( wall thickness at any point
for Type A and Type B pipes
manufactured plain or with socket shall be as given in
Table 1. Dimensions shall be measured according to
the method given in IS 12235 (Part 1).) |
- |
0 |
|
- |
| Cl.7.3.1(Minimum wall thickness of socket on pipes shall
be as given in Table 2 read with Fig. 2 and Fig. 3.) |
- |
1500 |
|
30% Discount |
| Cl.7.3.2(Dimensions of sockets for solvent cementing and
grooved sockets of pipes shall be as given in Tables 3
and 4 respectively, read with Fig. 2 and 3.) |
- |
0 |
|
- |
| Cl.8.1(The internal and external surface of the pipes shall be
smooth and clean, and free from grooving and other
defects. The end shall be clearly cut and shall be square
with the axis of the pipe. The end may be chamfered
on the plain side.) |
- |
0 |
|
- |
| Cl.8.2(When tested by the method described in IS 12235
(Part 5), a length of pipe sample of 200 ± 20 mm shall
not alter in length by more than 5 percent. In the case
of socket ended pipes, this test shall be carried out on
the plain portion of pipe taken at least 100 mm away
from the root of the socket.) |
- |
1500 |
|
30% Discount |
| Cl8.3(This test shall be carried out for socket end pipes only.
When tested by the method described in IS 12235
(Part 6), the test specimens shall not show blisters,
excessive delamination or cracking or signs of weld
line splitting.) |
- |
2500 |
|
30% Discount |
| Cl.8.4(When determined in accordance with IS 12235 (Part 2),
the vicat softening temperature of the specimen shall
not be less than 79°C.) |
- |
2500 |
|
30% Discount |
| Cl.8.5(After the required
period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show
difference of more than 20 percent of their initial tensile
strengths) |
- |
5000 |
|
30% Discount |
| Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid) |
- |
1500 |
|
30% Discount |
| Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than
10 percent. Mass of striker and height of fall shall be
as per Annex A.) |
- |
1500 |
|
30% Discount |
| Cl.10.2(When determined in accordance with the method
described in IS 12235 (Part 13), the tensile strength at
break shall not be less than 45 MPa.) |
- |
2500 |
|
30% Discount |
| Cl.10.3(The axial shrinkage shall not exceed 2 percent when
determined in accordance with Annex B.) |
- |
1500 |
|
30% Discount |
| Cl.11.(Jointing of solvent
cementing joints is to be carried out using solvent
conforming to IS 14182.
Apply a pressure of 0.05 MPa for a period of 15 min
and there should be no leakage at any joint.) |
- |
2500 |
|
30% Discount |
| Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane) |
- |
1500 |
|
30% Discount |
| 8.6(Effect on Water Test) |
- |
5000 |
|
30% Discount |
| 14(Marking) |
- |
0 |
|
- |
| Cl.5(Surface colour of the pipes shall be dark shade of grey) |
- |
0 |
|
- |
| Cl6.3(The composition shall be based on PVC resin
having a K-value of 64 or greater when tested in
accordance with IS 4669) |
- |
0 |
|
- |
| Cl.7.1(Mean outside diameter, outside diameter at any point
for Type A and Type B pipes
manufactured plain or with socket shall be as given in
Table 1. Dimensions shall be measured according to
the method given in IS 12235 (Part 1).) |
- |
0 |
|
- |
| Cl.7.1( outside diameter at any point
for Type A and Type B pipes
manufactured plain or with socket shall be as given in
Table 1. Dimensions shall be measured according to
the method given in IS 12235 (Part 1).) |
- |
0 |
|
- |
| Cl.7.1( wall thickness at any point
for Type A and Type B pipes
manufactured plain or with socket shall be as given in
Table 1. Dimensions shall be measured according to
the method given in IS 12235 (Part 1).) |
- |
0 |
|
- |
| Cl.7.3.1(Minimum wall thickness of socket on pipes shall
be as given in Table 2 read with Fig. 2 and Fig. 3.) |
- |
0 |
|
- |
| Cl.7.3.2(Dimensions of sockets for solvent cementing and
grooved sockets of pipes shall be as given in Tables 3
and 4 respectively, read with Fig. 2 and 3.) |
- |
0 |
|
- |
| Cl.8.1(The internal and external surface of the pipes shall be
smooth and clean, and free from grooving and other
defects. The end shall be clearly cut and shall be square
with the axis of the pipe. The end may be chamfered
on the plain side.) |
- |
0 |
|
- |
| Cl.8.2(When tested by the method described in IS 12235
(Part 5), a length of pipe sample of 200 ± 20 mm shall
not alter in length by more than 5 percent. In the case
of socket ended pipes, this test shall be carried out on
the plain portion of pipe taken at least 100 mm away
from the root of the socket.) |
- |
0 |
|
- |
| Cl8.3(This test shall be carried out for socket end pipes only.
When tested by the method described in IS 12235
(Part 6), the test specimens shall not show blisters,
excessive delamination or cracking or signs of weld
line splitting.) |
- |
0 |
|
- |
| Cl.8.4(When determined in accordance with IS 12235 (Part 2),
the vicat softening temperature of the specimen shall
not be less than 79°C.) |
- |
0 |
|
- |
| Cl.8.5(After the required
period of exposure, the tensile strengths of two samples when tested as per IS 12235 (Part 13) shall not show
difference of more than 20 percent of their initial tensile
strengths) |
- |
0 |
|
- |
| Cl. 9, IS 12235 Part 7(Resistance to Sulphuric Acid) |
- |
0 |
|
- |
| Cl.10.1(When tested by method prescribed in IS 12235 (Part 9),the pipe shall have a true impact rate of not more than
10 percent. Mass of striker and height of fall shall be
as per Annex A.) |
- |
0 |
|
- |
| Cl.10.2(When determined in accordance with the method
described in IS 12235 (Part 13), the tensile strength at
break shall not be less than 45 MPa.) |
- |
0 |
|
- |
| Cl.10.3(The axial shrinkage shall not exceed 2 percent when
determined in accordance with Annex B.) |
- |
0 |
|
- |
| Cl.11.(Jointing of solvent
cementing joints is to be carried out using solvent
conforming to IS 14182.
Apply a pressure of 0.05 MPa for a period of 15 min
and there should be no leakage at any joint.) |
- |
0 |
|
- |
| Cl. 12, IS 12235 Part 11(Resistance to Di-Chloro-Methane) |
- |
0 |
|
- |
| 8.6(Effect on Water Test) |
- |
0 |
|
- |
| 14(Marking) |
- |
0 |
|
- |
| Cl.7.2(Pipes shall be supplied in nominal lengths of 2, 3, 4 or
6 metres either plain or with socket for solvent
cementing/grooved socket. Tolerances on specified
length shall be + 10 mm and – 0 mm.The nominal length of the pipe with socket for solvent
cementing/grooved socket shall be as given in Fig. 1.) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
Included w.e.f 23.12.2024 |
| 15 |
IS 4985 (2021) |
UNPLASTICIZED PVC PIPES FOR POTABLE WATER SUPPLIES SPECIFICATION Fourth Revision |
- |
32550 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 10.1(Colour) |
- |
1000 |
|
30% Discount |
| 10.1(Surface Finish) |
- |
0 |
|
- |
| 7.2.1.1 Table3(Angle of taper (Note-1)) |
- |
1500 |
|
30% Discount |
| 10.7(Sulphated Ash Content) |
- |
2500 |
|
30% Discount |
| 5(CLASSIFICATION OF PIPES) |
- |
0 |
|
- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum)) |
- |
1500 |
|
30% Discount |
| 7(DIMENSIONS-PIPE-Nominal Diameter) |
- |
0 |
|
- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum)) |
- |
0 |
|
- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation) |
- |
0 |
|
- |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum)) |
- |
0 |
|
- |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum)) |
- |
0 |
|
- |
| 7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum)) |
- |
0 |
|
- |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum)) |
- |
0 |
|
- |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum)) |
- |
0 |
|
- |
| 7.1.2.1(DIMENSIONS-PIPE-Average Thickness) |
- |
0 |
|
- |
| 7.2.1(DIMENSIONS-Socket) |
- |
0 |
|
- |
| 7.2.1(DIMENSIONS-Socket) |
- |
0 |
|
- |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length) |
- |
0 |
|
- |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum)) |
- |
0 |
|
- |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum)) |
- |
0 |
|
- |
| 7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement) |
- |
0 |
|
- |
| 7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter) |
- |
0 |
|
- |
| 8(SEALING RINGS) |
- |
1000 |
|
30% Discount |
| 9.1(PIPE ENDS) |
- |
1000 |
|
30% Discount |
| 10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance) |
- |
0 |
|
- |
| 10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance) |
- |
0 |
|
- |
| 10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity) |
- |
1500 |
|
30% Discount |
| 10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test) |
- |
1500 |
|
30% Discount |
| 10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature) |
- |
2500 |
|
30% Discount |
| 10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density) |
- |
1000 |
|
30% Discount |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)) |
- |
5000 |
|
30% Discount |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)) |
- |
0 |
|
- |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets) |
- |
0 |
|
- |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets) |
- |
0 |
|
- |
| 11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes) |
- |
0 |
|
- |
| 11.2(Resistance to External Blows at 0°C) |
- |
15000 |
|
30% Discount |
| 10.3(Effect on Water Test) |
- |
5000 |
|
30% Discount |
| 6.1.2(PVC Resin) |
- |
1500 |
|
30% Discount |
| 7.1.3(mean outside diameter, outside diameter at
any point, and wall thickness of plumbing pipes) |
- |
0 |
|
- |
| 6.1.1(VCM Content) |
- |
5000 |
|
30% Discount |
| 7.2.1.2b(Maximum inner diameter of groove) |
- |
0 |
|
- |
| 13.1(Marking) |
- |
0 |
|
- |
| 10.1(Colour) |
- |
0 |
|
- |
| 10.1(Surface Finish) |
- |
0 |
|
- |
| 7.2.1.1 Table3(Angle of taper (Note-1)) |
- |
0 |
|
- |
| 10.7(Sulphated Ash Content) |
- |
0 |
|
- |
| 5(CLASSIFICATION OF PIPES) |
- |
0 |
|
- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Minimum)) |
- |
0 |
|
- |
| 7(DIMENSIONS-PIPE-Nominal Diameter) |
- |
0 |
|
- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. (Mamimum)) |
- |
0 |
|
- |
| 7.1.1.1(DIMENSIONS-PIPE-Mean O.D. Variation) |
- |
0 |
|
- |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Minimum)) |
- |
0 |
|
- |
| 7.1.1.2(DIMENSIONS-PIPE-O.D. at any Point (Maximum)) |
- |
0 |
|
- |
| 7.1.1.2(DIMENSIONS-PIPE-Ovality (Maximum)) |
- |
0 |
|
- |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Minimum)) |
- |
0 |
|
- |
| 7.1.2.1(DIMENSIONS-PIPE-Thickness(Maximum)) |
- |
0 |
|
- |
| 7.1.2.1(DIMENSIONS-PIPE-Average Thickness) |
- |
0 |
|
- |
| 7.2.1(DIMENSIONS-Socket) |
- |
0 |
|
- |
| 7.2.1(DIMENSIONS-Socket) |
- |
0 |
|
- |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Minimum Length) |
- |
0 |
|
- |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Minimum)) |
- |
0 |
|
- |
| 7.2.1.1-Table 3(DIMENSIONS-Socket-Sockets for solvent cement jointing-Diameter at mid point of the socket length (Maximum)) |
- |
0 |
|
- |
| 7.2.1.2(a)-Table 5(DIMENSIONS-Sockets for elastomeric sealing ring joints-Minimum depth of engagement) |
- |
0 |
|
- |
| 7.2.1.2-Table 4(DIMENSIONS-Sockets for elastomeric sealing ring joints-Socket inner Diameter) |
- |
0 |
|
- |
| 8(SEALING RINGS) |
- |
0 |
|
- |
| 9.1(PIPE ENDS) |
- |
0 |
|
- |
| 10.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance) |
- |
0 |
|
- |
| 10.1.1(PHYSICAL AND CHEMICAL CHARACTERISTICS-Visual Appearance) |
- |
0 |
|
- |
| 10.2(PHYSICAL AND CHEMICAL CHARACTERISTICS-Opacity) |
- |
0 |
|
- |
| 10.4(PHYSICAL AND CHEMICAL CHARACTERISTICS- Reversion Test) |
- |
0 |
|
- |
| 10.5(PHYSICAL AND CHEMICAL CHARACTERISTICS- Vicat Softening Temperature) |
- |
0 |
|
- |
| 10.6(PHYSICAL AND CHEMICAL CHARACTERISTICS- Density) |
- |
0 |
|
- |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)) |
- |
0 |
|
- |
| 11.1-Table 6(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)) |
- |
0 |
|
- |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Type Test)-for Integral Sealing Ring Sockets) |
- |
0 |
|
- |
| 11.1-Table 7(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Integral Sealing Ring Sockets) |
- |
0 |
|
- |
| 11.1.1(MECHANICAL PROPERTIES-Hydrostatic Pressure Test (Acceptance Test)-for Plumbing pipes) |
- |
0 |
|
- |
| 11.2(Resistance to External Blows at 0°C) |
- |
0 |
|
- |
| 10.3(Effect on Water Test) |
- |
0 |
|
- |
| 6.1.2(PVC Resin) |
- |
0 |
|
- |
| 7.1.3(mean outside diameter, outside diameter at
any point, and wall thickness of plumbing pipes) |
- |
0 |
|
- |
| 6.1.1(VCM Content) |
- |
0 |
|
- |
| 7.2.1.2b(Maximum inner diameter of groove) |
- |
0 |
|
- |
| 13.1(Marking) |
- |
0 |
|
- |
| 7.1.4(Length) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
Included w.e.f 23.12.2024 |
| 16 |
IS 14333 (2022) |
Polyethylene Pipes for Sewerage and Industrial Chemicals and Effluent � Specification (First Revision) |
- |
39900 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.2.1,T2("Base Density
(At 27°C Temp.)-IS 7328:2020 ") |
- |
1000 |
|
30% Discount |
| 5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963) |
- |
2500 |
|
30% Discount |
| 5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B)) |
- |
4000 |
|
30% Discount |
| 5.2.1,T2("Volatile Matter- IS 4984:2016
(Annexure-C)") |
- |
1500 |
|
30% Discount |
| 5.2.1,T2("Water Content-IS 4984:2016
(Annexure-D)") |
- |
2500 |
|
30% Discount |
| 5.2.1.1, T2(Compound Density-IS 7328:2020) |
- |
0 |
|
- |
| 5.2.1.1, T2("Compound carbon black -IS 2530:1963
content") |
- |
1500 |
|
30% Discount |
| 5.2.1.1, T2(Compound Toluene extract - Any Method) |
- |
2500 |
|
30% Discount |
| 5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C)) |
- |
0 |
|
- |
| 5.2.1.1, T2(Compound carbon black particle size- Any Method) |
- |
0 |
|
- |
| 5.2.1.1, T2(Compound ash content - Any Method) |
- |
1500 |
|
30% Discount |
| 5.2.1.1, T2("Compound carbon black -IS 2530:1963
dispersion") |
- |
0 |
|
- |
| 5.3(Density of Higher olefin - IS 7328:2020) |
- |
0 |
|
- |
| 5.3(Loading of Carbon Black - IS 2530:1963) |
- |
0 |
|
- |
| 5.3(Ash content- Any Method) |
- |
0 |
|
- |
| 5.3(Toluene extract - Any Method) |
- |
0 |
|
- |
| 5.3("Maximum volatile matter -IS 4984:2016
(Annexure-C)") |
- |
0 |
|
- |
| 5.3(Carbon black particle size - Any Method) |
- |
0 |
|
- |
| 6(Pipe Description - IS 14333-2022) |
- |
1000 |
|
30% Discount |
| 6.2(Colour- IS 14333-2022) |
- |
1000 |
|
30% Discount |
| 7.1(Visual Appearance- IS 14333-2022) |
- |
1000 |
|
30% Discount |
| 7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016) |
- |
1500 |
|
30% Discount |
| 7.4,T4 of IS 4984(wall Thickness-IS 4984-2016) |
- |
0 |
|
- |
| 7.4,T3 of IS 4984(Ovality-IS 4984-2016) |
- |
0 |
|
- |
| 8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E)) |
- |
15000 |
|
30% Discount |
| 8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E)) |
- |
0 |
|
- |
| 8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E)) |
- |
0 |
|
- |
| 8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E)) |
- |
0 |
|
- |
| 8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E)) |
- |
7500 |
|
30% Discount |
| 8.2("Longitudinal Reversion Test - IS 4984-2016
(Annexure-F)") |
- |
2500 |
|
30% Discount |
| 8.3(Carbon black content- IS 2530-1963) |
- |
0 |
|
- |
| 8.3(Carbon black content Dispersion- IS 2530-1963) |
- |
1500 |
|
30% Discount |
| 8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963) |
- |
0 |
|
- |
| 8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B)) |
- |
0 |
|
- |
| 8.6(Density-IS 7328:2020) |
- |
0 |
|
- |
| 8.7("Tensile Strength for Butt Fusion - IS 4984-2016
(Annexure-G)") |
- |
2000 |
|
30% Discount |
| 8.8,T5("Tensile - IS 4984-2016
(Annexure-H)") |
- |
2000 |
|
30% Discount |
| 8.8,T5("Elongation -IS 4984-2016
(Annexure-H)") |
- |
0 |
|
- |
| 8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J)) |
- |
5000 |
|
30% Discount |
| 5.2.1,T2("Base Density
(At 27°C Temp.)-IS 7328:2020 ") |
- |
0 |
|
- |
| 5.2.1,T2(Melt Flow Rate (At 190°C /5kg)-IS 2530:1963) |
- |
0 |
|
- |
| 5.2.1,T2(Thermal Stability(Oxidation Induction Time)-IS 4984:2016(Annexure-B)) |
- |
0 |
|
- |
| 5.2.1,T2("Volatile Matter- IS 4984:2016
(Annexure-C)") |
- |
0 |
|
- |
| 5.2.1,T2("Water Content-IS 4984:2016
(Annexure-D)") |
- |
0 |
|
- |
| 5.2.1.1, T2(Compound Density-IS 7328:2020) |
- |
0 |
|
- |
| 5.2.1.1, T2("Compound carbon black -IS 2530:1963
content") |
- |
0 |
|
- |
| 5.2.1.1, T2(Compound Toluene extract - Any Method) |
- |
0 |
|
- |
| 5.2.1.1, T2(Compound maximum volatile matter -IS 4984:2016 (Annexure-C)) |
- |
0 |
|
- |
| 5.2.1.1, T2(Compound carbon black particle size- Any Method) |
- |
0 |
|
- |
| 5.2.1.1, T2(Compound ash content - Any Method) |
- |
0 |
|
- |
| 5.2.1.1, T2("Compound carbon black -IS 2530:1963
dispersion") |
- |
0 |
|
- |
| 5.3(Density of Higher olefin - IS 7328:2020) |
- |
0 |
|
- |
| 5.3(Loading of Carbon Black - IS 2530:1963) |
- |
0 |
|
- |
| 5.3(Ash content- Any Method) |
- |
0 |
|
- |
| 5.3(Toluene extract - Any Method) |
- |
0 |
|
- |
| 5.3("Maximum volatile matter -IS 4984:2016
(Annexure-C)") |
- |
0 |
|
- |
| 5.3(Carbon black particle size - Any Method) |
- |
0 |
|
- |
| 6(Pipe Description - IS 14333-2022) |
- |
0 |
|
- |
| 6.2(Colour- IS 14333-2022) |
- |
0 |
|
- |
| 7.1(Visual Appearance- IS 14333-2022) |
- |
0 |
|
- |
| 7.4,T3 of IS 4984(Outside Diameter-IS 4984-2016) |
- |
0 |
|
- |
| 7.4,T4 of IS 4984(wall Thickness-IS 4984-2016) |
- |
0 |
|
- |
| 7.4,T3 of IS 4984(Ovality-IS 4984-2016) |
- |
0 |
|
- |
| 8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 27 oC , Test Period - 100 hrs.-IS 4984-2016 (Annexure-E)) |
- |
0 |
|
- |
| 8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E)) |
- |
0 |
|
- |
| 8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 165 hrs.-IS 4984-2016 (Annexure-E)) |
- |
0 |
|
- |
| 8.1.1, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 1000 hrs.-IS 4984-2016 (Annexure-E)) |
- |
0 |
|
- |
| 8.1.2, T4(Internal Pressure creep Rupture test, Temperature - 80 oC , Test Period - 48 hrs.-IS 4984-2016 (Annexure-E)) |
- |
0 |
|
- |
| 8.2("Longitudinal Reversion Test - IS 4984-2016
(Annexure-F)") |
- |
0 |
|
- |
| 8.3(Carbon black content- IS 2530-1963) |
- |
0 |
|
- |
| 8.3(Carbon black content Dispersion- IS 2530-1963) |
- |
0 |
|
- |
| 8.4(Melt Flow rate(Temperature - 190oC,Mass 5kg)-IS 2530-1963) |
- |
0 |
|
- |
| 8.5(Oxidation Induction Time -IS 4984:2016(Annexure-B)) |
- |
0 |
|
- |
| 8.6(Density-IS 7328:2020) |
- |
0 |
|
- |
| 8.7("Tensile Strength for Butt Fusion - IS 4984-2016
(Annexure-G)") |
- |
0 |
|
- |
| 8.8,T5("Tensile - IS 4984-2016
(Annexure-H)") |
- |
0 |
|
- |
| 8.8,T5("Elongation -IS 4984-2016
(Annexure-H)") |
- |
0 |
|
- |
| 8.9(Slow Crack Growth Rate{Internal Pressure creep Rupture test, Temperature - 80±1 oC , Test Pressure – 0.80MPa, Test Period - 500 hrs.-IS 4984-2016 (Annexure-E &J)) |
- |
0 |
|
- |
| 7.2(Length- IS 14333-2022) |
- |
0 |
|
- |
| 7.3(Coiling- IS 14333-2022) |
- |
0 |
|
- |
|
31 Dec, 2026 |
-
Included w.e.f 23.12.2024
Exclusion : Cl 5.3 (Olefin Constituents- 14333-2022), Cl 5.4 (Antioxidant - Any Method) |
| 17 |
IS 2566 (1993) |
Textiles – B-twill jute bags for packing foodgrains – Specification (third revision) |
- |
13500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl.5.1 (IS 1954 : 1990)
The bag shall conform to the requirements
specified in Table 1.(i) Dimensions ( see Note ):) |
- |
1500 |
|
Less 30% discount |
| Cl.5.1 1& Cl.8.5.2 of
IS 9113 : 1993
The bag shall conform to the requirements
specified in Table (Corrected mass per bag, g:) |
- |
1500 |
|
Less 30% discount |
| Cl.5.1 (IS 1963 : 1990)
The bag shall conform to the requirements
specified in Table 1.(Ends per dm) |
- |
1500 |
|
Less 30% discount |
| Cl.5.1 (IS 1963 : 1990)
The bag shall conform to the requirements
specified in Table 1.(Picks per dm) |
- |
1500 |
|
Less 30% discount |
| Cl.5.1 (IS 1969 : 1990)
The bag shall conform to the requirements
specified in Table 1.(Breaking load of cloth ( Min )
( revelled strip method.
10 × 20 cm ):) |
- |
5000 |
|
Less 30% discount |
| Cl.5.1 (IS 9030 : 1990)
The bag shall conform to the requirements
specified in Table 1.(Scam breaking load ( Min )
( revelled strip method,
5 × 20 cm ) N ( kgf )) |
- |
2500 |
|
Less 30% discount |
|
31 Dec, 2026 |
-
- |
| 18 |
IS 4751 (2023) |
Potassium metabisulphite food grade - Specification |
- |
21000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Description) |
- |
500 |
|
Rebate 30% Discount |
| 3.2(Identification Test) |
- |
2000 |
|
Rebate 30% Discount |
| 3.2.1(Acidicty to solution of phenol red) |
- |
2000 |
|
Rebate 30% Discount , Charges of Acidity ton solution of phenol red , Decolourize solution of iodine , Test for Potassium ,Test for Sulphite are included in the charges of identification = 2000rs |
| 3..2.2(Decolourize solution of iodine) |
- |
2000 |
|
Rebate 30% Discount , Charges of Acidity ton solution of phenol red , Decolourize solution of iodine , Test for Potassium ,Test for Sulphite are included in the charges of identification = 2000rs |
| 3.2.3.1(Test for Potassium) |
- |
2000 |
|
Rebate 30% Discount , Charges of Acidity ton solution of phenol red , Decolourize solution of iodine , Test for Potassium ,Test for Sulphite are included in the charges of identification = 2000rs |
| 3.2.3.2(Test for Sulphite) |
- |
2000 |
|
Rebate 30% Discount , Charges of Acidity ton solution of phenol red , Decolourize solution of iodine , Test for Potassium ,Test for Sulphite are included in the charges of identification = 2000rs |
| 3.3 Table 1(i)(Purity, as K₂S₂O₅) |
- |
2500 |
|
Rebate 30% Discount |
| 3.3 Table 1(ii)(Water insoluble matter) |
- |
1000 |
|
Rebate 30% Discount |
| 3.3 Table 1(iii)(Thiosulphate) |
- |
1000 |
|
Rebate 30% Discount |
| 3.3 Table 1(iv)(Arsenic (as As)) |
- |
2000 |
|
Rebate 30% Discount |
| 3.3 Table 1(v)(Iron (as Fe)) |
- |
1000 |
|
Rebate 30% Discount |
| 3.3 Table 1(vi)(Selenium (as Se)) |
- |
1000 |
|
Rebate 30% Discount |
| 3.3 Table 1(viii)(Lead (as Pb)) |
- |
1000 |
|
Rebate 30% Discount |
| 3.3 Table 1(vii)(pH) |
- |
1000 |
|
Rebate 30% Discount |
|
31 Dec, 2026 |
-
- |
| 19 |
IS 10508 (2020) |
Phosphoric Acid, Food Grade - Specification ( Second Revision ) |
- |
7000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clause 3.3, Table-1 (ix)(Copper (as Cu) mg/kg, Max) |
- |
1000 |
|
Rebate 30% Discount |
| Clause 3.3, Table-1 (x)(Tin, mg/kg, Max) |
- |
1000 |
|
Rebate 30% Discount |
| Clause 3.3, Table-1 (xi)(Cadmium(as Cd), mg/kg, Max) |
- |
1000 |
|
Rebate 30% Discount |
| Clause 3.3, Table-1 (xii)(Mercury, mg/kg, Max) |
- |
2000 |
|
Rebate 30% Discount |
| Clause 3.3, Table-1 (xiii)(Molybdenum (as Mo),) |
- |
1000 |
|
Rebate 30% Discount |
| Clause 3.3, Table-1 (xiv)(Aluminium (as Al)) |
- |
1000 |
|
Rebate 30% Discount |
|
31 Dec, 2026 |
-
- |
| 20 |
IS 8249 (2019) |
Zinc sulphate heptahydrate, agricultural grade - Specification (First Revision) |
- |
11000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 3.1(Description) |
- |
500 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(Zinc (as Zn)) |
- |
2500 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(Magnesium (as Mg)) |
- |
1000 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(Copper (as Cu)) |
- |
1000 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(Lead (as Pb)) |
- |
1000 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(pH) |
- |
1000 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(Matter insoluble in water) |
- |
1000 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(Sulphur (as S)) |
- |
1000 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(Cadmium (as Cd)) |
- |
1000 |
|
30% Discount |
| (Clauses 3.2 and 6.2) Table 1(Arsenic (as As)) |
- |
1000 |
|
30% Discount |
|
31 Dec, 2026 |
-
- |
| 21 |
IS 8887 (2018) |
Bitumen emulsion for roads (Cationic Type) - Specification (Third Revision) |
- |
33000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.6.2 Table-1; 1(i)(Residue on 600 micron IS Sieve, (Grad RS-1) IS 8, Annex 9) |
- |
1500 |
|
30 % Discount & Homogeneity Test as per Clause No. 6.1 follow = 3000rs |
| 6.6.2 Table-1; 1(ii) (1)(Viscosity by saybolt furol viscometer, seconds (Grad RS-1), IS 3117) |
- |
1500 |
|
30 % Discount |
| 6.6.2 Table-1; 1(iii)(Coagulation of emulsion at low temperature (Grad RS-1), Annex C) |
- |
2000 |
|
30% Discount |
| 6.6.2 Table-1; 1(iv)(Storage stability after 24 h (Grad RS-1), Annex D) |
- |
2000 |
|
30 % Discount |
| 6.6.2 Table-1; 1(v)(Particle charge (Grad RS-1), Annex E) |
- |
6000 |
|
30 % Discount |
| 6.6.2 Table-1; 1(vi) 1(Coating ability and water resistance:
Coating, dry aggregate (Grade RS-1) Annex F) |
- |
1000 |
|
30 % Discount |
| 6.6.2 Table-1; 1(vii)(Stability to mixing with cement (Grade RS-1) Annex G) |
- |
1500 |
|
30 % Discount |
| 6.6.2 Table-1; 1(viii)(Miscibility with water (Grade RS-1) Annex H) |
- |
1500 |
|
30 % Discount |
| 6.2-Table 1-x)(Distillation in percent volume of distillate recovered at 360°C at
1) 190°C
2) 225°C
3) 260°C
4) 316°C
5) Residue at 360°C, percent, Min) |
- |
3500 |
|
30 % Discount |
| 6.2-Table 1-ix)(Tests on residue:
1) Residue by evaporation, percent, Min
2) Penetration 25°C/100g/5 sec
3) Ductility 27°C/cm, Min
4) Solubility I tricholoethylne, percent by
mass, Min) |
- |
7000 |
|
30 % Discount |
| xi, Table-1(Water content) |
- |
2500 |
|
30 % Discount |
|
31 Dec, 2026 |
-
- |
| 22 |
IS 3812 : Part 2 (2013) |
Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete |
Use as Admixture in cement mortar and concrete |
23095 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Clase No.7.1, Table No.2, Sl.No.i(Fineness-Specific surface by Blaine's permeability method) |
- |
2000 |
|
30% Discount |
| Clase No.7.1, Table No.2, Sl.No.iii(Soundness by autoclave tests) |
- |
2500 |
|
30% Discount |
| 7.1, Table 1(Particles retained on 45 micron IS sieve (wet sieving)) |
- |
2000 |
|
30% Discount |
| 5.1, 6.1, Table 1(Loss on ignition) |
- |
2000 |
|
30% Discount |
| 5.1, 6.1, Table 1(Total chlorides) |
- |
1000 |
|
30% Discount |
| 5.1, 6.1, Table 1(Available alkalies as equivalent sodium oxide (Na2O)) |
- |
1000 |
|
30% Discount |
| 5.1, 6.1, Table 1(Silicon dioxide (SiO2 )) |
- |
2000 |
|
30% Discount |
| 5.1, 6.1, Table 1(Total sulphur as sulphur trioxide (SO3) |
- |
1000 |
|
30% Discount |
| 5.1, 6.1, Table 1(Magnesium oxide (MgO) |
- |
1000 |
|
30% Discount |
| 5.1, 6.1, Table 1(Silicon dioxide (SiO2 ) plus aluminium oxide (Al2O3 ) plus iron oxide (Fe2O3 )) |
- |
6000 |
|
30% Discount |
|
31 Dec, 2026 |
-
- |
| 23 |
IS 7933 (2022) |
Specification for Flexible Polyurethane Foam for Domestic Mattresses First Revision |
Type I and Type II |
19000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 5.1(Constituents) |
- |
1500 |
|
Rebate 30% Discount |
| 5.2(appearance and odour) |
- |
1500 |
|
Rebate 30% Discount |
| 5.3(Colour) |
- |
1500 |
|
Rebate 30% Discount |
| 5.4(Dimensions and Tolerances) |
- |
1500 |
|
Rebate 30% Discount |
| 5.6(Indentation Hardness Index (for Type 1 and 2)) |
- |
2500 |
|
Rebate 30% Discount |
| 5.7(Durability (for Type 1 and 2)) |
- |
2000 |
|
Rebate 30% Discount |
| 5.8, Table 1, i)(Density,) |
- |
1500 |
|
Rebate 30% Discount |
| 5.8, Table 1, ii)(Tensile strength) |
- |
2500 |
|
Rebate 30% Discount |
| 5.8, Table 1, iii)(Heat ageing) |
- |
1500 |
|
Rebate 30% Discount |
| 5.8, Table 1, iv)(Compression set) |
- |
3000 |
|
Rebate 30% Discount |
|
31 Dec, 2026 |
-
- |
| 24 |
IS 7809 : Part 3 : Sec 1 (1986) |
Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision) |
- |
23250 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 4.6(Flammability ,Cl 6 of IS 7809 (Part 2): 1977) |
- |
2500 |
|
- |
| 4.8(Stability to accelerated ageing ) |
- |
3000 |
|
- |
| 4.9(Insulation resistance test) |
- |
5000 |
|
- |
| 4.7(Electrolytic corrosion) |
- |
7000 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| 3.1(Marking, Cl.9 of IS 7809 (Part 1):1975) |
- |
200 |
|
- |
| Cl.No.4 of IS 7809 (Part 1)-1975(Appearance) |
- |
200 |
|
- |
| Cl.No.5 of IS 7809 (Part 1)-1975(Freedom From Deffects) |
- |
200 |
|
- |
| Cl.No.3.2(Width) |
- |
1000 |
|
Charges of Thickness,width,length (Dimension) are same that is Rs=1000/- |
| Cl.No.3.3(Length) |
- |
1000 |
|
Charges of Thickness,width,length (Dimension) are same that is Rs=1000/- |
| Cl.No.3.4(Thickness) |
- |
1000 |
|
Charges of Thickness,width,length (Dimension) are same that is Rs=1000/- |
| Cl.No.4.1(Tensile Strength) |
- |
1500 |
|
- |
| Cl.No.4.2(Adhesion to Steel) |
- |
2000 |
|
- |
| Cl.No.4.3(Adhesion to backing) |
- |
2000 |
|
- |
| Cl.No.4.4(Electric Strength at RT) |
- |
2500 |
|
- |
| Cl.No.4.5(Electric Strength after Humid Conditioning) |
- |
5000 |
|
- |
| Cl.No.4.6(Flammability) |
- |
2500 |
|
- |
|
31 Dec, 2026 |
-
- |
| 25 |
IS 2062 (2011) |
Hot rolled medium and high tensile structural steel - Specification (Seventh Revision) |
- |
18231 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Cl 7(Workmanship) |
- |
1000 |
|
30% DISCOUNT |
| Cl. 10.3 (Cl. 10.3 (Tensile Strength)) |
- |
5000 |
|
30% DISCOUNT |
| Cl. 10.3 (Cl. 10.3 (Yield Stress)) |
- |
0 |
|
Charges of Yield strength & Elongation are included in Tensile charges |
| Cl. 10.3 (Cl. 10.3 (Elongation %)) |
- |
0 |
|
Charges of Yield strength & Elongation are included in Tensile charges |
| Cl 18(Weight) |
- |
1000 |
|
30% DISCOUNT |
| Cl. 15, 16(Width ) |
- |
0 |
|
- |
| Cl. 15, 16(Thickness ) |
- |
0 |
|
- |
| Cl 11.3(Press) |
- |
0 |
|
- |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
2000 |
|
30% DISCOUNT |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Sulphur- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
2000 |
|
30% DISCOUNT |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Phosphorus- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
2000 |
|
30% DISCOUNT |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
2000 |
|
30% DISCOUNT |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Silicon- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
2000 |
|
30% DISCOUNT |
| Cl. 5, 8.1 ,8.2. Table 1 (Grade:- E250, E275,E300 ,E350 ,E410, E450, E550,E600, E650)(Carbon Equivalent- IS 228 and relevant parts or any other established Instrumental/Chemical method.) |
- |
2000 |
|
30% DISCOUNT |
| Cl 12(Sudden Load Applied) |
- |
1500 |
|
30% DISCOUNT |
| 15(Dimensions AxB) |
- |
1000 |
|
30% DISCOUNT |
| Clause 12(Impact Test) |
- |
11000 |
|
30% DISCOUNT |
| Clause 7(Freedom from Defect) |
- |
1000 |
|
30% DISCOUNT |
| Cl 11.3(Press) |
- |
2500 |
|
30% DISCOUNT |
|
31 Dec, 2026 |
-
- |
| 26 |
IS 2830 (2012) |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision) |
- |
9726 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 6.1(Carbon %) |
- |
3000 |
|
LESS 30% DISCOUNT |
| 6.1(Sulphur %) |
- |
3000 |
|
LESS 30% DISCOUNT |
| 6.1(Phosphorus %) |
- |
3000 |
|
LESS 30% DISCOUNT |
| 6.1(Manganese %) |
- |
3000 |
|
LESS 30% DISCOUNT |
| 6.1( Copper %) |
- |
0 |
|
0 |
| Cl. 10.1 (a)(Macro Examination) |
- |
2500 |
|
LESS 30% DISCOUNT |
| Cl. 10.1 (b)(Sulphur Print) |
- |
3500 |
|
LESS 30% DISCOUNT |
| Clause 10.3(Camber) |
- |
1000 |
|
LESS 30% DISCOUNT |
| Clause 10.2(Bend) |
- |
2500 |
|
LESS 30% DISCOUNT |
| Clause 9(Freedom from Defect) |
- |
500 |
|
LESS 30% DISCOUNT |
| 11(Dimensions) |
- |
1000 |
|
LESS 30% DISCOUNT |
|
31 Dec, 2026 |
-
- |
| 27 |
IS 2494 : Part 1 (1994) |
V - Belts - Endless V - Belts for industrial purposes: Part 1 general purpose - Specification (Second Revision) |
- |
16500 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 7.1(Belt Pitch Length) |
- |
1500 |
|
Rebate 30% Discount |
| 10.1(Elongation) |
- |
2500 |
|
Rebate 30% Discount & charges of tensile strength & Elongation are included as same i.e rs=2500/- |
| 10.1(Tensile Strength) |
- |
2500 |
|
Rebate 30% Discount & charges of tensile strength & Elongation are included as same i.e rs=2500/- |
| 7.2(Test Matched Belts) |
- |
2000 |
|
Rebate 30% Discount |
| 5 & 11(Test Belt ride position of top surface of belt with respect to top of pully groove.) |
- |
1500 |
|
Rebate 30% Discount |
| Clause 5 Table 1(Nominal Pitch Width (Wp)) |
- |
1500 |
|
Rebate 30% Discount |
| Clause 5 Table 1(Nominal Height (T)) |
- |
1500 |
|
Rebate 30% Discount |
| Clause 5 Table 1(Nominal Included Angle (A)) |
- |
2500 |
|
Rebate 30% Discount |
| 5 Table 1(Cross sectional dimension) |
- |
1500 |
|
Rebate 30% Discount |
| 5 Table 1(Cross sectional dimension) |
- |
2000 |
|
Rebate 30% Discount & This is charges of Belt pitch Length (Clause : 7.1) i.e rs=2000/- |
|
31 Dec, 2026 |
-
- |
| 28 |
IS 3589 (2001) |
Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision) |
- |
31000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 8.1 Table 2 Table 3(Carbon Content IS 228) |
- |
2400 |
|
Less 30% discount |
| 8.1 Table 2 Table 3(Sulphur Content IS 228) |
- |
2400 |
|
Less 30% discount |
| 8.1 Table 2 Table 3(Manganese Content IS 228) |
- |
2400 |
|
Less 30% discount |
| 8.1 Table 2 Table 3(Phosphorus Content IS 228) |
- |
2400 |
|
Less 30% discount |
| 8.1(CE) |
- |
2400 |
|
Less 30% discount |
| 9.1(Tensile test-Strength) |
- |
5000 |
|
Less 30% discount |
| 9.1(Tensile test- Elongation) |
- |
0 |
|
Less 30% discount & Charges of Yield & elongation are included in tensile test charges |
| 9.3(Guided bend test(For SAW Pipes)) |
- |
2500 |
|
Less 30% discount |
| 9.2.1(Flattening test for
ERW pipes ) |
- |
2500 |
|
Less 30% discount |
| 9.3(Guided Bend Test
(for SAW Pipes)) |
- |
0 |
|
- |
| 11.1, Table 5.(Outside Diameter (OD)) |
- |
2000 |
|
Less 30% discount , Dimension Charges |
| 12.3.3(Ovality) |
- |
1000 |
|
Less 30% discount |
| 12.5(Strightness) |
- |
1000 |
|
Less 30% discount |
| 14.1(Visual inspection, Appearance and Workmanship) |
- |
500 |
|
Less 30% discount and Galvanized (mass of Zinc coating = 3000 with 30% Discount) , Joint and End =1000 with 30% discount , Length = 500 with 30% discount |
| 9.1(Tensile test-Yield Strength) |
- |
0 |
|
Less 30% discount & Charges of Yield & elongation are included in tensile test charge |
| 11.1, Table 5.(Mass) |
- |
2000 |
|
Less 30% discount , Dimension & Mass charges |
|
31 Dec, 2026 |
-
Cl 10 Hydraulic pressure test. Scope restricted upto 1200mm. |
| 29 |
IS 694 (2010) |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision) |
- |
27938 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| Table 1 iii) c) 2)(Loss of mass- Insulation ) |
- |
1000 |
|
Charges of LOI for Insulation |
| 5.3(Thickness of Insulation) |
- |
500 |
|
Insulation & sheath |
| 9.1(Ovality) |
- |
500 |
|
Insulation & sheath |
| 10.4(Flammability test- Unaffected portion) |
- |
750 |
|
- |
| 10.4(Flammability test-Burning after flame removal) |
- |
750 |
|
- |
| Table 1 iii) c) 5)(Heat shock-Insulation ) |
- |
500 |
|
- |
| 10.1(HV (water immersion)) |
- |
2000 |
|
- |
| Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation) |
- |
500 |
|
- |
| table 1 e) 3) (IR constant- max. Temp) |
- |
1500 |
|
- |
| table 1 e) 3) (IR constant- Room temp ) |
- |
1500 |
|
- |
| table 1 e) 3) (Volume Resistivity - Room temp ) |
- |
1500 |
|
- |
| table 1 e) 3) (Volume Resistivity - Maximum temp) |
- |
1500 |
|
- |
| 10.5(Oxygen index) |
- |
1000 |
|
- |
| 4.2(Conductor resistance test) |
- |
1000 |
|
- |
| Table 1 iii) d) 2)(Loss of mass- Sheath ) |
- |
1000 |
|
Charges of LOI for sheath |
| 10.7(Temperature index) |
- |
7500 |
|
- |
| Table 1 iii) c) 3)(Tensile strength (After ageing)) |
- |
4000 |
|
- |
| Table 1 iii) c) 1)(Tensile strength (Without ageing)) |
- |
1000 |
|
- |
| Table 1 iii) c) 1)(Elongation (Without ageing)) |
- |
1000 |
|
- |
| Table 1 iii) c) 3)(Elongation (After ageing)) |
- |
0 |
|
- |
| 4.1(Tensile test (for Al)- After Stranding) |
- |
1000 |
|
- |
| 10.6(Halogen evolution) |
- |
2000 |
|
- |
| 10.8(Smoke density rating) |
- |
1500 |
|
- |
| 4.1(Wrapping test (for Al)) |
- |
1000 |
|
- |
| 10.11(Persulphate Test ) |
- |
1000 |
|
- |
| Table 1 iii) c) 9)(Cold impact for insulation) |
- |
1000 |
|
- |
| Table 1 iii) c) 8)(Cold bend for insulation) |
- |
1000 |
|
- |
| 10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC)) |
- |
10500 |
|
Ageing Test + HV = 3500+7000=10500rs |
| Table 1 iii) c) 7)(Thermal stability- Insulation ) |
- |
1000 |
|
- |
| Table 1 iii) d) 4)(Shrinkage- Sheath ) |
- |
1000 |
|
- |
| 4.1(Annealing test (for copper)) |
- |
1000 |
|
- |
|
31 Dec, 2026 |
-
- |
| 30 |
IS 1251 (1988) |
Specification for zinc phosphide, technical |
- |
10000 View breakup
-
| Clause No. |
Exclusion |
Testing Charges (Excl. Of Taxes) |
Effective Date |
Remark |
| 2.1(Description) |
- |
1000 |
|
30% Discount |
| 2.2 Table 2 ii (Zinc Content) |
- |
2000 |
|
30% Discount |
| 2.2 Table 2 iii (Sieving Requirements: Material passing through 150 micron IS Sieve) |
- |
1000 |
|
30% Discount |
| 2.2 Table 2 i (Zinc Phosphide (Zn3P2)) |
- |
5000 |
|
30% Discount |
| 2.2 Table 2 iv (Sieving Requirements: Material passing through 106 micron IS Sieve) |
- |
0 |
|
- |
| 2.3(Freedom from sulphides) |
- |
1000 |
|
30% Discount |
|
31 Dec, 2026 |
-
- |
