BIS - LIMS (Laboratory Information Management System)

TUV SUD SOUTH ASIA PRIVATE LIMITED, BENGALURU

PLOT NO. 3, P1-B, HITECH , DEVANAHALLI, DEFENCE & AEROSPACE PARK, KIADB INDUSTRIAL AREA, BK PALYA, Bengaluru, Bengaluru Urban, Karnataka, 562149

8882641647 vinod.suryavanshi@tuvsud.com

Scope List

Reset

9 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

Mobile Phone Handsets-Indian Language Support

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	5000	10% discount to BIS
5.2(Message Readability)	-	5000	10% discount to BIS
6(Marking)	-	5000	10% discount to BIS
"Cl.6.1 "(Marking)	-	5000	10% discount to BIS
"Cl.6.2 "(BIS Certification Marking)	-	5000	10% discount to BIS
4(Requirements)	-	5000	10% discount to BIS
5(Tests)	-	5000	10% discount to BIS
6(Marking)	-	5000	10% discount to BIS
5.1(Inputting of text)	-	0	-
5.2(Message Readability)	-	0	-
6(Marking)	-	0	-
"Cl.6.1 "(Marking)	-	0	-
"Cl.6.2 "(BIS Certification Marking)	-	0	-
4(Requirements)	-	0	-
5(Tests)	-	0	-
6(Marking)	-	0	-

11 Sep, 2027

-
Included w.e.f.13.12.2024

IS/IEC 62368 : Part 1 (2018)

Audio / Video, Information and Communication Technology Equipment Part 1 Safety Requirements ( First Revision )

Audio/video, information and communication technology

212000 View breakup
Rs.2,12,000/- (10% Discount)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 4, 4.1, 4.1.1, 4.1.2, 4.1.3, 4.1.4, 4.1.5, 4.1.6, 4.1.7, 4.1.8, 4.1.9,4.1.10, 4.1.11,4.1.12, 4.1.13, 4.1.14,4.1.15(General Requirements)	-	3000	10% discount to BIS
Cl. 4.2, 4.2.1, 4.2.2, 4.2.3, 4.2.4(Energy source classifications)	-	3000	10% discount to BIS
Cl. No. 4.3 ,4.4,4.5, 4.6,4.7,4.8,4.9,4.10 with all sub clauses(Protection against energy sources)	-	3000	-
Cl. No. 5,5.1,5.2,5.3,5.4,5.5,5.6,5.7,5.8 with all sub clauses(Electrically-caused injury)	-	40000	10% discount to BIS
Cl No. 6,6.1,6.2,6.3,6.4,6.5,6.6 with all sub clause(Electrically-caused fire)	-	25000	10% discount to BIS
Cl. 7, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6(Injury caused by hazardous substances)	-	5000	10% discount to BIS
Cl. 9, 9.1, 9.2, 9.2.1,9.2.2, 9.2.3, 9.3, 9.3.1, 9.3.2, 9.4, 9.5, 9.5.1, 9.5.2, 9.6, 9.6.1, 9.6.2, 9.6.3(Thermal burn injury)	-	25000	10% discount to BIS
Cl. 8,8.1,8.2,8.3,8.4,8.5,8.6,8.7,8.8,8.9,8.10,8.11,8.12 with all sub clause(Mechanically-caused injury)	-	8000	10% discount to BIS
Annex. B, B.1, B.1.1, B.1.2, B.1.3, B.1.4, B.1.5,B.2,B.2.1, B.2.2, B.2.3, B.2.4, B.2.5, B.2.6, B.2.6.1, B.2.6.2, B.2.6.3, B.2.7, B.3, B.3.1, B.3.2, B.3.3, B.3.4, B.3.5, B.3.6, B.3.7, B.3.8, B.4, B.4.1, B.4.2, B.4.3, B.4.3.1, B.4.3.2,B.4.4, B.4.4.1, B.4.4.(Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	20000	10% discount to BIS
Annex. D, D.1, D.2, D.3(Test Generators)	-	2000	10% discount to BIS
Annex E, E.1, E.2, E.3(Test conditions)	-	5000	10% discount to BIS
Annex. F, F.1, F.2, F2.1, F.2.2,F2.3,F.3, F.3.1, F.3.2, F.3.2.1,F.3.2.2, F.3.3,F.3.3.1, F.3.3.2,F.3.3.3, F.3.3.4, F.3.3.5, F.3.3.6,F.3.3.7, F.3.3.8, F.3.4, F.3.5, F.3.5.1,F.3.5.2, F.3.5.3, F.3.5.4, F.3.5.5,F.3.5.6, F.3.5.7,F.3.6, F.3.6.1, F.3.6.1.1, F.3.6(Equipment markings, instructions, and instructional safeguards)	-	3000	10% discount to BIS
Annex. G, G.1, G.1.1, G.1.2, G.1.3, G.2, G.2.1, G.2.2, G.2.3, G.2.4, G.3, G.3.1, G.3.1.1, G.3.1.2, G.3.2, G.3.2.1,G.3.2.2, G.3.3,G.3.4, G.3.5, G.3.5.1, G.3.5.2, G.4, G.4.1, G.4.2, G.4.3, G.5, G.5.1, G.5.1.1, G.5.1.2,G.5.1.3,G.5.2,G.5.2.1, G.5.2.2, G.5.2.3(Components)	-	15000	10% discount to BIS
Annex I(Overvoltage categories)	-	1000	10% discount to BIS
Annex. J, J.1, J.2, J.2.1, J.2.2, J.2.2.1, J.2.2.1.1, J.2.2.1.2, J.2.2.1.3, J.2.2.2, J.2.3, J.2.4, J.2.5, J.3, J.3.1, J.3.2, J.3.3(Insulated winding wires for use without interleaved insulation)	-	5000	10% discount to BIS
Annex. K, K.1, K.1.1, K.1.2, K.2, K.3, K.4, K.5, K.5.1, K.5.2, K.6, K.6.1, K.6.2, K.7, K.7.1, K.7.2, K.7.3, K.7.4(Safety Interlocks)	-	4000	10% discount to BIS
Annex. L, L.1, L.2, L.3, L.4, L.5, L.6, L.7, L.8, L.9,(Disconnect devices)	-	2000	10% discount to BIS
Annex. N(Electrochemical potentials)	-	0	-
Annex. O(Measurement of creepage distances and clearances)	-	5000	10% discount to BIS
Annex. P, P.1, P.2, P.2.1, P.2.2, P.2.3, P.2.3.1, P.2.3.2, P.3, P.3.1, P.3.2, P.3.3, P.3.4, P.4, P.4.1, P.4.2(Safeguards against conductive objects)	-	8000	10% discount to BIS
Annex. Q, Q.1, Q.1.1, Q.1.2, Q.2(Circuits intended for interconnection with building wiring)	-	6000	10% discount to BIS
Annex. S, S.1, S.2, S.3, S.3.1, S.3.2, S.4, S.5(Tests for resistance to heat and fire)	-	8000	10% discount to BIS
Annex. T, T.1, T.2, T.3, T.4, T.5, T.6, T.7, T.8, T.9, T.10, T.11(Mechanical strength tests)	-	6000	10% discount to BIS
Annex. V, V.1, V.1.1, V.1.2, V.1.3, V.1.4, V.1.5, V.1.6, V.2(Determination of accessible parts)	-	5000	10% discount to BIS
Annex. X(Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420V peak (300V rms))	-	5000	10% discount to BIS

11 Sep, 2027

-
Exclusion: Cl.4.1.8 (Liquids and liquid filled components (LFC)), Cl. 5.6.4.1 & Cl. 5.4.12.3 (Compatibility of an insulating liquid), Cl.7.2 (Reduction of exposure to hazardous Substances) Cl.10 (Radiation), Annex G.5.3.4 (Test for FIW), Annex G.7 (Mains supply cords), Annex G.9 (IC current limiters), Annex G.15 (Hydrostatic pressure), Annex J.3 (Testing during manufacturing), Annex M.7, M.8.2 (Risk of explosion from lead acid and NiCd batteries), Annex R (Limited Short-Circuit Test), Annex Y (Constructions requirements for outdoor enclosures), Annex C (UV Radiation)

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

d.c. or a.c. supplied electronic controlgear

75000 View breakup
Rs.75,000/- (10% Discount)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2500	10% discount to BIS
8(Protection against accidental contact with live parts)	-	3000	10% discount to BIS
9(Terminals)	-	3500	10% discount to BIS
10(PROVISION FOR EARTHING)	-	5000	10% discount to BIS
11(MOISTURE RESISTANCE)	-	5500	10% discount to BIS
12(Electric Strength)	-	6500	10% discount to BIS
13(Thermal endurance test for winding of ballasts)	-	0	10% discount to BIS
14(Fault conditions)	-	7500	10% discount to BIS
15(Transformer heating)	-	9500	10% discount to BIS
16(Construction)	-	7500	10% discount to BIS
17(Creepage distance and clearances)	-	6500	10% discount to BIS
18(Screws, current carrying parts and connections)	-	7000	10% discount to BIS
19(Resistance to heat, fire and tracking)	-	5500	10% discount to BIS
20(Resistance to corrosion)	-	5500	10% discount to BIS
16(Enclosures)	-	0	-
16(Bridging resistor in primary circuit)	-	0	-
16(Capacitor and RC units)	-	0	-
16(RF suppression (X-Y capacitors))	-	0	-
16(Inductor)	-	0	-
16(MOV/VDR)	-	0	-
16(SMPS/Mains Transformer)	-	0	-
16(PCB material)	-	0	-
19(Metal base PCB for LED)	-	0	-
19(Transparent cover)	-	0	-
19(Bobbin)	-	0	-
16(Insulated tape)	-	0	-
16(Heat shrinkage sleeve)	-	0	-
19(Terminals)	-	0	-
16(Connector)	-	0	-
16(Fuse)	-	0	-
16(Internal wire)	-	0	-
16(LED)	-	0	-
16(Opto-coupler)	-	0	-
16(Opto-coupler)	-	0	-
16(EMI/EMC filter)	-	0	-
16(Winding wire)	-	0	-
16(Thin sheet materials)	-	0	-
7(Marking)	-	2500	10% discount to BIS
8("PROTECTION AGAINST ACCIDENTAL CONTACT WITH LIVE PARTS")	-	3500	10% discount to BIS
9(TERMINALS)	-	3500	10% discount to BIS
10(PROVISIONS FOR PROTECTIVE EARTHING)	-	5000	10% discount to BIS
11(MOISTURE RESISTANCE AND INSULATION)	-	5500	10% discount to BIS
12(ELECTRIC STRENGTH)	-	6500	10% discount to BIS
14(FAULT CONDITIONS)	-	7500	10% discount to BIS
15(TRANSFORMER HEATING)	-	9500	10% discount to BIS
16(CONSTRUCTION)	-	7500	10% discount to BIS
17(CREEPAGE DISTANCES AND CLEARANCES)	-	6500	10% discount to BIS
18("SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS")	-	7000	10% discount to BIS
19(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	5500	10% discount to BIS
20(RESISTANCE TO CORROSION)	-	5500	10% discount to BIS
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL NOTES ON TESTS)	-	0	-
6(CLASSIFICATION)	-	0	-

11 Sep, 2027

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

Self - Ballasted led lamps for general lighting service

75000 View breakup
Rs.75,000/- (10% Discount)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	3000	10% discount to BIS
6(Interchangeability)	-	5000	10% discount to BIS
7(Protection against accidental contact with live parts)	-	7000	10% discount to BIS
8(Insulation Resistance and Electric Strength)	-	9000	10% discount to BIS
9(MECHANICAL STRENGTH)	-	7000	10% discount to BIS
10(cap temperature)	-	7500	10% discount to BIS
11(Resistance to Heat)	-	9000	10% discount to BIS
12(Resistance to Flame and Ignition)	-	8500	10% discount to BIS
13(Fault conditions)	-	11000	10% discount to BIS
14(Creepage distance and clearances)	-	8000	10% discount to BIS
4(General requirement and General test requirements)	-	0	10% discount to BIS
15(Selection of lamps for tests (Sampling))	-	0	-
16(Condition of compliance)	-	0	-
17(Tests)	-	0	-
Annex A(Ovreview of systems composed of LED modules and control gear)	-	0	-
Annex B(Lamps with operating position limitations)	-	0	-
5(Marking)	-	3000	10% discount to BIS
6(Interchangeability)	-	5000	10% discount to BIS
7(Protection against accidental contact with live parts)	-	7000	10% discount to BIS
8(Strength after humidity treatment)	-	9000	10% discount to BIS
9(Mechanical strength)	-	7000	10% discount to BIS
10(Cap temperature rise)	-	7500	10% discount to BIS
11(Resistance to heat)	-	9000	10% discount to BIS
12(Resistance to flame and ignition)	-	8500	10% discount to BIS
13(Fault conditions)	-	11000	10% discount to BIS
14(Creepage distances and clearances)	-	8000	10% discount to BIS
4(GENERAL REQUIREMENT AND GENERAL TEST REQUIREMENTS)	-	0	-

11 Sep, 2027

-
-

IS 10322 : Part 5 : Sec 5 (2013)

Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)

Floodlights

80000 View breakup
Rs.80,000/- (10% Discount)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2500	10% discount to BIS
5(Classification of Luminaires')	-	2500	10% discount to BIS
6.0(Marking)	-	3000	10% discount to BIS
7.0(Construction)	-	4000	10% discount to BIS
8.0(Creepage Distance and Clearances)	-	5000	10% discount to BIS
9.0(Provision for earthing)	-	7000	10% discount to BIS
10.0(Terminals)	-	7000	10% discount to BIS
12.0(Protection against electric shock)	-	9000	10% discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	10000	10% discount to BIS
14.0(Resistance to Dust & Moisture)	-	7000	10% discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	8000	10% discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	7000	10% discount to BIS
11.0(External & Internal Wiring)	-	8000	10% discount to BIS

11 Sep, 2027

-
Exclusion: Cl.4.24 (UV Radiation), Cl.4.11.6 (Electromechanical Contact), Cl.17 (Photometric test)

IS 10322 : PART 5 : SEC 3 (2012)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

luminaires for road and street lighting

80000 View breakup
Rs.80,000/- (10% Discount)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2500	10% discount to BIS
5(Classification of Luminaires')	-	2500	10% discount to BIS
6.0(Marking)	-	3000	10% discount to BIS
7.0(Construction)	-	4000	10% discount to BIS
8.0(Creepage Distance and Clearances)	-	5000	10% discount to BIS
9.0(Provision for earthing)	-	7000	10% discount to BIS
10.0(Terminals)	-	7000	10% discount to BIS
11.0(External & Internal Wiring)	-	8000	10% discount to BIS
12.0(Protection against electric shock)	-	9000	10% discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	10000	10% discount to BIS
14.0(Resistance to Dust & Moisture)	-	7000	10% discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	8000	10% discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	7000	10% discount to BIS

11 Sep, 2027

-
Exclusion: Cl.4.24 (UV Radiation), Cl.4.11.6 (Electromechanical Contact), Cl.17 (Photometric test)

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

Information technology equipment

160000 View breakup
Rs.1,60,000/- (10% Discount)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	5000	10% discount to BIS
1.6(Power interface .)	-	2000	10% discount to BIS
1.7(Markings and instructions)	-	3000	10% discount to BIS
2.1(Protection from electric shock and energy hazards)	-	16500	10% discount to BIS
2.2(SELV circuits)	-	4500	10% discount to BIS
2.3(TNV circuits)	-	14000	10% discount to BIS
2.4(Limited current circuits)	-	2000	10% discount to BIS
2.5(Limited power sources .)	-	2500	10% discount to BIS
2.6(Provisions for earthing and bonding)	-	2500	10% discount to BIS
2.7(Overcurrent and earth fault protection in primary circuits)	-	2000	10% discount to BIS
2.8(Safety interlocks)	-	2500	10% discount to BIS
2.9(Electrical insulation)	-	2000	10% discount to BIS
2.10(Clearances, creepage distances and distances through insulation)	-	8500	10% discount to BIS
2.10.9(Thermal Cycling)	-	0	-
2.10.10(Test for Pollution Degree 1 environment and for insulating compound)	-	0	-
2.10.11(Tests for semiconductor devices and for cemented joints)	-	0	-
2.10.12(Enclosed and sealed parts)	-	0	-
3.1(General)	-	2000	10% discount to BIS
3.2(Connection to a mains supply)	-	4000	10% discount to BIS
3.3(Wiring terminals for connection of external conductors)	-	1500	10% discount to BIS
3.5(Interconnection of equipment)	-	1500	10% discount to BIS
4.1(Stability)	-	2000	10% discount to BIS
4.2(Mechanical strength)	-	14000	10% discount to BIS
4.3(Design and construction)	-	8000	10% discount to BIS
4.4(Protection against hazardous moving parts)	-	2000	10% discount to BIS
4.5(Thermal requirements)	-	3000	10% discount to BIS
4.6(Openings in enclosures)	-	2000	10% discount to BIS
4.7(Resistance to fire)	-	2000	10% discount to BIS
5.1(Touch current and protective conductor curren)	-	2000	10% discount to BIS
5.2(Electric strength)	-	4000	10% discount to BIS
5.3(Abnormal operating and fault conditions)	-	3000	10% discount to BIS
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	3000	10% discount to BIS
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	3000	10% discount to BIS
6.3(Protection of the telecommunication wiring system from overheating)	-	3000	10% discount to BIS
7.4(Insulation between primary circuits and cable distribution systems)	-	3000	10% discount to BIS
Annex A3(Hot flaming oil test)	-	5000	10% discount to BIS
Annex B(Motor tests under abnormal conditions)	-	4000	10% discount to BIS
Annex C(Transformers)	-	4000	10% discount to BIS
Annex DD(Requirements for the mounting means of a rack mounted equipment)	-	2000	10% discount to BIS
Annex CC(Evaluation of integrated circuit (IC) current limiters)	-	2000	10% discount to BIS
Annex EE(Household and home/ office document/ media shredders)	-	2000	10% discount to BIS
4.6.2(Bottoms of fire enclosures)	-	0	10% discount to BIS
3.4(Disconnection from the mains supply)	-	1500	10% discount to BIS
7.1(General)	-	500	10% discount to BIS
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	3000	10% discount to BIS
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	4000	10% discount to BIS
2.10.4.2(Material Group and Comparative Tracking Index)	-	0	-
2.10.5.3(Insulating Compound as Solid Insulation)	-	0	-
2.10.5.6(Thin sheet materials)	-	0	-
2.10.5.11(SMPS Transformer and Inductor)	-	0	-
2.10.5.12(Wires in wound components)	-	0	-
2.10.5.13(Winding wire)	-	0	-
2.10.5.14(Additional insulation in wound components)	-	0	-
2.10.6(PCB material)	-	0	-
2.10.8.2(Thermal conditioning (thermal ageing))	-	0	-
2.10.8.4(Abrasion resistance test)	-	0	-
3.1.4(Internal wire)	-	0	-
3.2.4(Appliance inlet /connector)	-	0	-
3.2.4(Appliance inlet /connector)	-	0	-
3.2.5(Non re-wirable plug with PVC sheathed cable)	-	0	-
4.3.8(Batteries)	-	0	-
4.3.10(Dust, powders, liquids and gases)	-	0	-
4.3.11(Containers for liquids or gases)	-	0	-
1.5(Components)	-	0	-

11 Sep, 2027

-
Exclusion: Cl.2.10.5.4 (Semiconductor devices), Cl. 2.8.2 (Interlock switches) Cl.2.8.5 (Moving parts), Cl.2.8.7 (Switches & Relays), Cl.4.2.8 (Cathode Ray Tube), Cl.4.2.9 (High pressure lamps), Cl.4.3.12 (Flammable liquids), Cl.4.3.13 (Radiation), Annex K (Thermal Controls), Annex Q (Voltage dependent Resistors (VDRs)), Annex U (Insulated winding wires)

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

Audio, video and similar electronic apparatus

121000 View breakup
Rs.1,21,000/- (10% Discount)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	3500	10% discount to BIS
7(Heating under normal operating conditions)	-	9500	10% discount to BIS
8(Constructional requirements with regard to the protection against electric shock)	-	6500	10% discount to BIS
9(Electric shock hazard under normal operating conditions)	-	7000	10% discount to BIS
10(Insulation requirements)	-	8000	10% discount to BIS
11(Fault conditions)	-	9000	10% discount to BIS
12(Mechanical strength)	-	9000	10% discount to BIS
13(CLEARANCES and CREEPAGE DISTANCES)	-	7000	10% discount to BIS
14(Components)	-	8000	10% discount to BIS
15(TERMINALS)	-	8000	10% discount to BIS
17(Electrical connections and mechanical fixings)	-	6500	10% discount to BIS
19(Stability and mechanical hazards)	-	6000	10% discount to BIS
20(Resistance to fire)	-	4000	10% discount to BIS
Annex-A(Additional requirements for apparatus with protection against splashing water)	-	5000	10% discount to BIS
16(External flexible cords)	-	6000	10% discount to BIS
20.2.4(Printed Boards)	-	0	-
3(General requirements)	-	4000	--
4(General test conditions)	-	4000	-
Annex-B(Apparatus to be connected to the TELECOMMUNICATION NETWORKS)	-	6000	-
Annex-L(Additional requirements for electronic flash apparatus for photographic purposes)	-	4000	-
Cl.5.1 of Cl.5(General requirements)	-	0	-
Cl.5.1-i) of Cl.5(Comprehensible and easily discernible)	-	0	-
Cl.5.1-ii) of Cl.5(Permanent durability against water and petroleum spirit)	-	0	-
Cl.5.2 of Cl.5(Identification and supply ratings)	-	0	-
Cl.5.2 a) of Cl.5(Identification, maker)	-	0	-
Cl.5.2 b) of Cl.5(Model number or type reference)	-	0	-
Cl.5.2 d) of Cl.5(Nature of supply)	-	0	-
Cl.5.2 e) of Cl.5(Rated supply voltage)	-	0	-
Cl.5.2 f) of Cl.5(Mains frequency if safety dependant)	-	0	-
Cl.5.2 g) of Cl.5(Rated current or power consumption for apparatus supplied by supply apparatus for general use, on apparatus or in instruction manual: Measured current or power consumption: Deviation % (max 10%):)	-	0	-
Cl.5.2 h) of Cl.5(Rated current or power consumption for apparatus intended for connection to an a.c. mains supply:Measured current or power consumption for Television set: Deviation % (max 10%):)	-	0	-
Cl.5.2 h)-ii) of Cl.5(Graphical symbols placed on the apparatus, whether required by this standard or not, shall be in accordance with IEC 60417 or ISO 3864-2 or ISO 7000, if available. In the absence of suitable symbols, the manufacturer may design specific graphical symbols.)	-	0	-
Cl.5.2 h)-iii) of Cl.5(Care shall be taken so that additional markings and instructions not required by this standard do not contradict the markings and instructions required by this standard . Symbols placed on the Equipment shall be explained in the user manual.)	-	0	-
Cl.5.3 of Cl.5(Terminals)	-	0	-
Cl.5.3a) of Cl.5(Earth terminal)	-	0	-
Cl.5.3b) of Cl.5(Hazardous live terminals)	-	0	-
Cl.5.3c) of Cl.5(Markings on supply output terminals)	-	0	-
Cl.5.4 of Cl.5(Caution marking)	-	0	-
Cl.5.4a) of Cl.5(Use of triangle with exclamation mark)	-	0	-
Cl.5.4b) of Cl.5(Marking on loudspeaker grille, IEC 60417-5036)	-	0	-
Cl.5.4c) of Cl.5(User-replaceable coin / button cell battery marking)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5.1 of Cl.5.5(Safety relevant information)	-	0	-
Cl.5.5.2 a) of Cl.5.5(Mains powered equipment not exposed to dripping or splashing. Warning concerning objects filled with liquid, etc.)	-	0	-
Cl.5.5.2 b) of Cl.5.5(Hazardous live terminals, instructions for wiring)	-	0	-
Cl.5.5.2 c) of Cl.5.5(Instructions for replacing lithium battery)	-	0	-
Cl.5.5.2 d) of Cl.5.5(Class I earth connection warning)	-	0	-
Cl.5.5.2 e) of Cl.5.5(Instructions for multimedia system connection)	-	0	-
Cl.5.5.2 f) of Cl.5.5(Special stability warning for attachment of the apparatus to the floor/wall)	-	0	-
Cl.5.5.2 g) of Cl.5.5(Warning: battery exposure to heat)	-	0	-
Cl.5.5.2 h) of Cl.5.5(Warning: protective film on CRT face)	-	0	-
Cl.5.5.2 i) of Cl.5.5("Warning: Non-floor standing TV >7kg")	-	0	-
Cl.5.5.2 j) of Cl.5.5("Warning: User replaceable coin / button cell battery")	-	0	-
Cl.5.5.3 (a-b) of Cl.5.5(Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings)	-	0	-
Cl.5.5.3 c) of Cl.5.5(Instructions for permanently connected equipment)	-	0	-
Cl.5.5.3 c) i) of Cl.5.5(Marking, signal lamps or similar for completely disconnection from the mains)	-	0	-
Cl.7.1 of Cl.7(General)	-	0	-
"Cl.7.1.1 of Cl.7.1 Table-3"(Requirements)	-	0	-
"Cl.7.1.2 of Cl.7.1 Table-3"(Accessible parts)	-	0	-
"Cl.7.1.3 of Cl.7.1 Table-3"(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
"Cl.7.1.4 of Cl.7.1 Table-3"(Parts acting as a support or a mechanical barrier)	-	0	-
"Cl.7.1.5 of Cl.7.1 Table-3"(Windings)	-	0	-
"Cl.7.1.6 of Cl.7.1 Table-3"(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.7.2 of Cl.7(Softening temperature of insulating material supporting parts conductively connected to the mains carrying a current> 0.2 A, shall be at least 150ºC)	-	0	-
Cl.8.1 of Cl.8(Conductive parts covered by lacquer, paper, untreated textile oxide films and beads etc. considered to be bare*)	-	0	-
Cl.8.2 of Cl.8(No shock hazard when changing voltage setting device, fuse-links or handling drawers etc.)	-	0	-
Cl.8.3 of Cl.8(Insulation of hazardous live parts not provided by hygroscopic material)	-	0	-
Cl.8.4 of Cl.8(No risk of electric shock from accessible parts or from parts rendered accessible following the removal of a cover which can be removed by hand)	-	0	-
Cl.8.5 of Cl.8(Class I apparatus*)	-	0	-
Cl.8.5 ii) of Cl.8(Resistors bridging basic insulation shall complying with 14.1 a) *)	-	0	-
Cl.8.5 iii) of Cl.8(Capacitors bridging basic insulation shall complying with 14.2.1 a) *)	-	0	-
Cl.8.5 iv) of Cl.8(Protective earthing terminal *)	-	0	-
Cl.8.6 of Cl.8(Class II apparatus)	-	0	-
Cl.8.6 a) of Cl.8(Basic and supplementary insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.6 b) of Cl.8(Reinforced insulation between hazardous live parts and accessible parts *)	-	0	-
Cl.8.7 of Cl.8(Components bridging insulation)	-	0	-
Cl.8.7 i) of Cl.8(Basic insulation bridged by components complying with 14.4.5.3)	-	0	-
Cl.8.7 ii) of Cl.8(Components bridging basic, supplementary, double or reinforced insulation complying with 14.2 a) or 14.4)	-	0	-
Cl.8.7 iii) of Cl.8(Basic and supplementary insulation each being bridged by a capacitor or RC-unit complying with 14.3.2 a))	-	0	-
Cl.8.7 iv) of Cl.8(Double or reinforced insulation being bridged with 2 capacitors or RC-units in series complying with 14.3.2 a))	-	0	-
Cl.8.7 v) of Cl.8(Double or reinforced insulation being bridged with a single capacitor or RC-unit complying with 14.3.2 b))	-	0	-
Cl.8.8 of Cl.8(Insulation thickness and thin sheet materials)	-	0	-
Cl.8.8 i) of Cl.8(Basic or supplementary insulation > 0,4 mm (mm)*)	-	0	-
Cl.8.8 ii) of Cl.8(Reinforced insulation > 0,4 mm (mm) *)	-	0	-
Cl.8.8 iii) of Cl.8(Thin sheet material used inside the equipment)	-	0	-
Cl.8.8 iv) of Cl.8(Basic or supplementary insulation, atleast two layers, each meeting10.4)	-	0	-
Cl.8.8 v) of Cl.8(Basic or supplementary insulation, three layers any two of which meet10.4)	-	0	-
Cl.8.8 vi) of Cl.8(Reinforced insulation, two layers each of which meet 10.4)	-	0	-
Cl.8.9 of Cl.8(Adequate insulation between internal hazardous live conductors and accessible parts, or between internal hazardous live parts and conductors connected to accessible parts)	-	0	-
Cl.8.10 of Cl.8(Double insulation between accessible parts and conductors connected to the mains)	-	0	-
Cl.8.10 of Cl.8(Double insulation between conductors connected to accessible parts and parts connected to the mains)	-	0	-
Cl.8.11 of Cl.8(Detaching of wires)	-	0	-
Cl.8.11 i) of Cl.8(Noun due reduction of creepage or clearance distances if wires become detached)	-	0	-
Cl.8.11 ii) of Cl.8(Vibration test carried out)	-	0	-
Cl.8.12 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.13 of Cl.8(Adequate fastening of windows, lenses, lamp covers etc. (pull test 20 N for 10 s))	-	0	-
Cl.8.14 of Cl.8(No risk of damage to the insulation of internal wiring due to hot parts or sharp edges)	-	0	-
Cl.8.15 of Cl.8(Only special supply equipment can be used*)	-	0	-
Cl.8.18 of Cl.8(Disconnection from the mains)	-	0	-
Cl.8.18 i) of Cl.8(Disconnect device used in apparatus)	-	0	-
Cl.8.18 ii) of Cl.8(All-pole switch or circuit breaker with >3mm contact separation.)	-	0	-
Cl.8.18 iii) of Cl.8(Mains switch ON indication *)	-	0	-
Cl.8.19 of Cl.8(Switch not fitted in the mains cord *)	-	0	-
Cl.8.20 of Cl.8(Bridging components comply with clause 14)	-	0	-
Cl.8.21 of Cl.8(Non-separable thin sheet material)	-	0	-
Cl.9.1 of Cl.9(Testing on the outside)	-	0	-
Cl.9.1.1 of Cl.9.1(Requirements)	-	0	-
Cl.9.1.1 i) of Cl.9.1(Accessible parts shall not be hazardous live)	-	0	-
Cl.9.1.1 ii) of Cl.9.1(Inaccessible terminals are not accessible or comply with relevant requirements)	-	0	-
Cl.9.1.1 iii) of Cl.9.1(For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation)	-	0	-
Cl.9.1.1.2 of Cl.9.1.1(Determination of hazardous live parts)	-	0	-
Cl.9.1.1.2 a) of Cl.9.1.1(Open circuit voltages)	-	0	-
Touch current measured from terminal devices using the network in annex D(Touch current measured from terminal devices using the network in annex D)	-	0	-
Cl.9.1.1.2 c) of Cl.9.1.1(The charge exceeds 45 μC)	-	0	-
Cl.9.1.1.2 d) of Cl.9.1.1(Energy of discharge not exceeding 350 mJ)	-	0	-
Cl.9.1.1.3 of Cl.9.1.1(Test with test finger and test probe)	-	0	-
Cl.9.1.2 of Cl.9.1(Shafts of operating knobs, handles, levers and the like)	-	0	-
Cl.9.1.3 of Cl.9.1(Openings ofthe enclosure)	-	0	-
Cl.9.1.4 of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 i) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.4 ii) of Cl.9.1(Terminals)	-	0	-
Cl.9.1.5 of Cl.9.1(Pre-set controls)	-	0	-
Cl.9.1.6 of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 i) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 ii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.6 iii) of Cl.9.1(Withdrawal of the mains plug:)	-	0	-
Cl.9.1.7 of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 a) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 b) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.1.7 c) of Cl.9.1(Resistance to external forces)	-	0	-
Cl.9.2 of Cl.9(Removal of protective covers)	-	0	-
Cl.10.2 of Cl.10(Surge Test)	-	0	-
Cl.10.2 a) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (i) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (ii) of Cl.10(Surge Test)	-	0	-
Cl.10.2 b) (iii) of Cl.10(Surge Test)	-	0	-
Cl.10.3 of Cl.10(Humidity treatment)	-	0	-
Cl.10.4 of Cl.10(Insulation resistance and dielectric strength)	-	0	-
Cl.10.4.1 of Cl.10.4(Insulation of the insulating materials)	-	0	-
Cl.10.4.2 of Cl.10.4(Between parts of different polarity directly connected to the mains Between parts of different polarity directly connected to the mains)	-	0	-
Cl.10.4.2 i) of Cl.10.4(Between parts separated by BASIC or SUPPLEMENTARY insulation)	-	0	-
Cl.10.4.2 ii) of Cl.10.4(Between parts separated by REINFORCED insulation)	-	0	-
Cl.11.1 of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 a) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.1 b) of Cl.11(Electric Shock Hazard)	-	0	-
Cl.11.2 of Cl.11(Heating)	-	0	-
Cl.11.2.1 of Cl.11.2(Requirements)	-	0	-
Cl.11.2.1 i) of Cl.11.2(No danger of fire to the surroundings)	-	0	-
Cl.11.2.1 ii) of Cl.11.2(Safety not impaired by abnormal heat)	-	0	-
Cl.11.2.1 of Cl.11.2(Flames extinguish within 10 seconds)	-	0	-
Cl.11.2.1 of Cl.11.2(No hazard from softening solder)	-	0	-
Cl.11.2.1 of Cl.11.2(Soldered terminations not used as protective mechanism)	-	0	-
Cl.11.2.2 of Cl.11.2(Measurement of temperature rises)	-	0	-
Cl.11.2.3 of Cl.11.2(Accessible parts)	-	0	-
Cl.11.2.4 of Cl.11.2(Parts, other than windings and printed boards, providing electrical insulation)	-	0	-
Cl.11.2.5 of Cl.11.2(Parts acting as a support or a mechanical barrier)	-	0	-
Cl.11.2.6 of Cl.11.2(Windings )	-	0	-
Cl.11.2.7 of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) a) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 i) b) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 ii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.7 iii) of Cl.11.2(Printed boards)	-	0	-
Cl.11.2.8 of Cl.11.2(Parts not subject to a limit under7.1.1 to 7.1.4)	-	0	-
Cl.12.1.1 of Cl.12.1(Requirements)	-	0	-
Cl.12.1.2 of Cl.12.1(Bump test )	-	0	-
Cl.12.1.3 of Cl.12.1(Vibration test)	-	0	-
Cl.12.1.4 of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 i) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.4 ii) of Cl.12.1(Impact test)	-	0	-
Cl.12.1.5 of Cl.12.1(Drop test)	-	0	-
Cl.12.1.6 of Cl.12.1(Stress relief test)	-	0	-
Cl.12.2 of Cl.12(Fixing of actuating elements)	-	0	-
Cl.12.3 of Cl.12(Remote control devices held in hand)	-	0	-
Cl.12.4 of Cl.12(Drawers )	-	0	-
Cl.12.5 of Cl.12(Antenna coaxial sockets mounted on the apparatus)	-	0	-
Cl.12.5 a) of Cl.12(Endurance test,)	-	0	-
Cl.12.5 b) of Cl.12(Impact test,)	-	0	-
Cl.12.5 c) of Cl.12(Torque test)	-	0	-
Cl.12.6 of Cl.12(Telescoping or rod antennas)	-	0	-
Cl.12.6.1 of Cl.12.6(General requirements)	-	0	-
Cl.12.6.1 i) of Cl.12.6(General requirements)	-	0	-
Cl.12.6.2 of Cl.12.6(Physical securement)	-	0	-
Cl.12.7 of Cl.12(Apparatus containing coin / button cell batteries)	-	0	-
Cl.12.7.1 of Cl.12.7(Coin/button cell batteries with a diameter of 32 mm or less.)	-	0	-
Cl.12.7.2 of Cl.12.7(Construction requirementss)	-	0	-
Cl.12.7.3 of Cl.12.7(Tests)	-	0	-
Cl.12.7.3.2 of Cl.12.7.3(Stress relief test)	-	0	-
Cl.12.7.3.3 of Cl.12.7.3(Battery replacement test)	-	0	-
Cl.12.7.3.4 of Cl.12.7.3(Drop test)	-	0	-
Cl.12.7.3.5 of Cl.12.7.3(Impact test)	-	0	-
Cl.12.7.3.6 of Cl.12.7.3(Crush test)	-	0	-
Cl.12.7.4 of Cl.12.7(Compliance)	-	0	-
Cl.13.1 of Cl.13(General)	-	0	-
Cl.13.2 of Cl.13(Determination of Working voltage)	-	0	-
Cl.13.3 of Cl.13(Clearances)	-	0	-
Cl.13.3.1 of Cl.13.3(General)	-	0	-
Cl.13.3.2 of Cl.13.3(Clearances in circuits conductively connected to the mains)	-	0	-
Cl.13.3.3 of Cl.13.3(Clearances in circuits not conductively connected to the mains)	-	0	-
Cl.13.3.4 of Cl.13(Measurement of transient voltages)	-	0	-
Cl.13.4 a) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 b) of Cl.13(Creepage distances )	-	0	-
Cl.13.4 c) of Cl.13(Creepage distances )	-	0	-
Cl.13.6 a) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 b) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 c) of Cl.13(Jointed insulation )	-	0	-
Cl.13.6 d) of Cl.13(Jointed insulation )	-	0	-
Cl.13.7 of Cl.13(Enclosed and sealed parts)	-	0	-
Cl.13.8 of Cl.13(Parts filled with insulating compound, meeting the requirements of 8.8)	-	0	-
Cl.15.1 of Cl.15(Plugs and Sockets*)	-	0	-
Cl.15.1.1 of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.1 i) of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.1 ii) of Cl.15.1(Plugs and Sockets*)	-	0	-
Cl.15.1.2 of Cl.15.1(Design of connectors other than for mains power *)	-	0	-
Cl.15.1.2 i) of Cl.15.1(Design of sockets with symbol of 5.3 b) design *)	-	0	-
Cl.15.1.3 of Cl.15.1(Design of terminals and connectors used in output circuits of supply apparatus*)	-	0	-
Cl.15.2 of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 i) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 ii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iii) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 iv) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.2 v) of Cl.15(Provisions for protective earthing)	-	0	-
Cl.15.3 of Cl.15(Terminals for external flexible cords and for permanent connection to the mains supply*)	-	0	-
Cl.15.3.1 of Cl.15.3(Adequate terminals for connection of permanent wiring*)	-	0	-
Cl.15.3.2 of Cl.15.3(Reliable connection of non-detachable cords)	-	0	-
Cl.15.3.2 i) of Cl.15.3(Not soldered to conductors of a printed circuit board)	-	0	-
Cl.15.3.2 ii) of Cl.15.3(Adequate clearances and creepage distances between connections should a wire break away)	-	0	-
Cl.15.3.2 iii) of Cl.15.3(Wire secured by additional means to the conductor)	-	0	-
Cl.15.3.3 of Cl.15.3(Screws and nuts clamping conductors have adequate threads: ISO 261, ISO 262 or similar*)	-	0	-
Cl.15.3.4 of Cl.15.3(Conductors adequately fixed (two independent fixings) *)	-	0	-
Cl.15.3.5 of Cl.15.3(Terminals allow connection of conductors having appropriate cross-sectional area)	-	0	-
Cl.15.3.6 of Cl.15.3(Terminals to 15.3.3 have sizes required by table 16)	-	0	-
Cl.15.3.7 of Cl.15.3(Terminals clamp conductors between metal and have adequate pressure)	-	0	-
Cl.15.3.7 i) of Cl.15.3(Terminals designed to avoid conductor slipping out when tightened)	-	0	-
Cl.15.3.7 ii) of Cl.15.3(Terminals adequately fixed when tightened or loosened (no loosening, wiring not stressed, distances not reduced))	-	0	-
Cl.15.3.8 of Cl.15.3(Terminals carrying a current more than)	-	0	-
Cl.15.3.8 i) of Cl.15.3(0.2 A, contact pressure not transmitted by insulating material except ceramic*)	-	0	-
Cl.15.3.9 of Cl.15.3(Termination of non-detachable cords: wires terminated near to each other)	-	0	-
Cl.15.3.9 i) of Cl.15.3(Terminals located and shielded: test with 8 mm strand)	-	0	-
Cl.15.4 of Cl.15(Devices forming a part of the mains plug*)	-	0	-
Cl.15.4.1 of Cl.15.4(No undue strain on mains socket-outlets.)	-	0	-
Cl.15.4.1 i) of Cl.15.4(Device shall be tested on the equipment as per Fig.11: Torque to be applied : 0.25 Nm (Max))	-	0	-
Cl.15.4.2 of Cl.15.4(Device complies with standard for dimensions of mains plugs)	-	0	-
Cl.15.4.3 of Cl.15.4(Device has adequate mechanical strength (tests a,b,c))	-	0	-
Cl.16.1 a) of Cl.16(Mains supply flexible cords shall be sheathed type, complying with IEC 60227 for PVC cords or as per IEC 60245 for synthetic rubber cords)	-	0	-
Cl.16.1 b) of Cl.16(Non-detachable cords for Class I have green/yellow core for protective earth)	-	0	-
Cl.16.2 of Cl.16(Mains cords conductors shall have a nominal cross-sectional area not less than the values given in Table 18, for rated current consumption of the apparatus)	-	0	-
Cl.16.3 a) of Cl.16(Flexiblecordsnotcomplyingwith16.1, used for interconnections between separate units of equipment used in combination and carrying hazardous live voltages, have adequate dielectric strength as perCl.10.3)	-	0	-
Cl.16.4 of Cl.16(Flexible cords used for connection between equipment have adequate cross-sectional areas to avoid temperature rise under normal and fault conditions)	-	0	-
Cl.16.5 a) of Cl.16(Adequate strain relief on external flexible cords)	-	0	-
Cl.16.5 b) of Cl.16(Not possible to push cord back into equipment)	-	0	-
Cl.16.5 c) of Cl.16(Strain relief device unlikely to damage flexible cord)	-	0	-
Cl.16.5 d) of Cl.16(For mains cords of Class I equipment, hazardous live conductors become taut before earth conductor)	-	0	-
Cl.16.6 of Cl.16(Apertures for external flexible cord: no risk of damage to the cord during assembly or movement in use)	-	0	-
Cl.16.7 a) of Cl.16(Transportable apparatus fitted with detachable cord sets with appliance inlet as perIEC60320-1 or)	-	0	-
Cl.16.7 b) of Cl.16(Transportable apparatus shall have a means of stowage to protect the cord)	-	0	-
17.1 a) of Cl.17(Screws are loosened and then tightened with a torque according to table20)	-	0	-
Cl.17.1 b) of Cl.17(5 times in the case of screws operating in a thread of metal)	-	0	-
Cl.17.1 c) of Cl.17(10 times in the case of screws operating in wood or in a thread in insulating material:)	-	0	-
Cl.17.2 of Cl.17(Correct introduction of screws into female threads in non-metallic material)	-	0	-
Cl.17.3 a) of Cl.17(Screws or other fixing devices intended to fix Covers, legs, stands or the like, shall be captive in order to prevent replacement during servicing by screws or other fixing devices……)	-	0	-
Cl.17.3 b) of Cl.17(Non-captive fixing screws: no hazard when replaced by a screw whose length is 10 times its diameter)	-	0	-
Cl.17.4 of Cl.17(No loosening of conductive parts carrying a current > 0.2 A)	-	0	-
Cl.17.5 of Cl.17(Contact pressure not transmitted through plastic other than ceramic for connections carrying a current > 0.2 A*)	-	0	-
Cl.17.6 of Cl.17(Stranded conductors of flexible supply cords carrying a current > 0.2 A with screw terminals not consolidated by solder *)	-	0	-
Cl.17.7 of Cl.17(Cover fixing devices other than screws have adequate strength and their positioning is unambiguous)	-	0	-
Cl.17.8 of Cl.17(Detachable legs or stands supplied by the manufacturer of the apparatus shall be delivered with the relevant fixing means *)	-	0	-
Cl.17.9 a) of Cl.17(Internal pluggable connections, affecting safety, unlikely to become disconnected)	-	0	-
Cl.17.9 b) of Cl.17(By applying a 2N pull force in any direction to the connection, in case of doubt)	-	0	-
Cl.19.1 of Cl.19(Stability and mechanical hazards)	-	0	-
Cl.19.1 of Cl.19(Stability requirements)	-	0	-
Cl.19.1 i) of Cl.19(Stability requirements)	-	0	-
Cl.19.2 of Cl.19(Test at 10° to the horizontal)	-	0	-
Cl.19.3 of Cl.19(Vertical force test )	-	0	-
Cl.19.4 of Cl.19(Horizontal force test)	-	0	-
Cl.19.5 of Cl.19(Test of edges and corners)	-	0	-
Cl.19.6 of Cl.19(Mechanical strength of glass)	-	0	-
Cl.19.6.1 of Cl.19.6(Requirements)	-	0	-
Cl.19.6.2 of Cl.19.6(Fragmentation test)	-	0	-
Cl.19.7 of Cl.19(Wall or ceiling mounting means)	-	0	-
Cl.19.7.1 of Cl.19..7(Requirements)	-	0	-
Cl.19.7.3 of Cl.19.7(Compliance)	-	0	-
Cl.20.1 of Cl.20(Requirements)	-	0	-
Cl.20.2 of Cl.20(Electrical components and mechanical parts)	-	0	-
Cl.20.2.1 a) of Cl.20.2(Exemption for components contained in an enclosure of material V-0 to IEC60695- 11-10 with openings not exceeding 1 mm in width)	-	0	-
Cl.20.2.1 b) of Cl.20.2(Exemption for small components)	-	0	-
Cl.20.2.2 of Cl.20.2(Electrical components )	-	0	-
Cl.20.2.3 of Cl.20.2(Internal wiring)	-	0	-
Cl.20.2.5 of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 i) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.2.5 ii) of Cl.20.2(Components and parts not covered by 20.2.2, 20.2.3 and 20.2.4)	-	0	-
Cl.20.3 of Cl.20(Fire enclosure*)	-	0	-
Cl.20.3.1 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.2 of Cl.20.3(Fire enclosure*)	-	0	-
Cl.20.3.3 of Cl.20.3(Fire enclosure*)	-	0	-
8.16/ H 2.2/ H 2.3(Requirements for insulated winding wires for use without additional interleaved insulation)	-	0	-
8.16(Wound Component)	-	0	-
Cl.5.2 h)-i) of Cl.5(appliance coupler for Class I is used for Class II equipment with functional earth connection, the requirements of Clause 15 and Clause 16 related to Class I construction shall be applied up to the connecting point of the protective(earthing) conductor to the functional earth.)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.5.5 of Cl.5(Instructions)	-	0	-
Cl.8.5 i) of Cl.8(Basic insulation between hazardous live parts and earthed accessible parts *)	-	0	-
Cl.8.16 of Cl.8(Insulated winding wire without additional interleaved insulation)	-	0	-
Cl.20.2.4 of Cl.20.2(Printed boards)	-	0	-
Cl.20.2.4 i) of Cl.20.2(Printed boards)	-	0	-
14(Components)	-	0	-
15(Internal wires and power cords)	-	0	-
18(Mechanical strength of Picture tubes and protection against the effect of implosion)	-	0	-

11 Sep, 2027

-
Exclusion: Cl.6.1 (Inonization radiation), Cl.6.2 (Laser radiations), Cl.6.3 (Light emitting diodes), Cl.18 (Mechanical strength of picture tubes and protection against the effect of implosion), 16.3b (Cord Bending Test)

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

Fixed General Purpose luminaire

75000 View breakup
Rs.75,000/- (10% Discount)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	2500	-
5(Classification of Luminaires')	-	2500	-
6.0(Marking)	-	3000	-
7.0(Construction)	-	3000	-
8.0(Creepage Distance and Clearances)	-	3500	-
9.0(Provision for earthing)	-	6000	-
10.0(Terminals)	-	7000	-
11.0(External & Internal Wiring)	-	7500	-
12.0(Protection against electric shock)	-	10000	-
13.0(Endurance Tests and Thermal Tests)	-	10000	-
14.0(Resistance to Dust & Moisture)	-	7000	-
15.0(Insulation Resistance and Electric Strength)	-	10000	-
16.0(Resistance to Heat , fire and tracking)	-	8000	-

11 Sep, 2027

-
Exclusion: Cl.4.24 (UV Radiation), Cl.4.11.6 (Electromechanical Contact), Cl.17 (Photometric test)

Bureau of Indian Standards

The National Standards Body of India

TUV SUD SOUTH ASIA PRIVATE LIMITED, BENGALURU

PLOT NO. 3, P1-B, HITECH , DEVANAHALLI, DEFENCE & AEROSPACE PARK, KIADB INDUSTRIAL AREA, BK PALYA, Bengaluru, Bengaluru Urban, Karnataka, 562149

8882641647 vinod.suryavanshi@tuvsud.com

Scope List