BIS - LIMS (Laboratory Information Management System)

Advance Electrical Testing And Calibration Lab LLP

13/1/A GIDC, MAKARPURA ROAD, MAKARPURA, VADODARA, Vadodara, Vadodara, Gujarat, 390014

6358331284 quality@aetclab.com

Scope List

Reset

2 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 1180 : Part 3 (2021)

Outdoor/Indoor Type Liquid Immersed Distribution Transformers Up to and Including 2 500 kVA, 33 kV — Specification Part 3 Natural/Synthetic Organic Ester Liquid Immersed

upto 2500 kVA, 33 kV

72205 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.2 a(Measurement of winding resistance [IS 2026 (Part 1)].)	-	785	10 % Discount for BIS
21.2 b(Measurement of voltage ratio and check of phase displacement [IS 2026 (Part 1)].)	-	910	10 % Discount for BIS
21.2 c(Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load [IS 2026 (Part 1)].)	-	7430	10 % Discount for BIS
21.2 d(Measurement of no-load loss and current [IS 2026 (Part 1)].)	-	5950	10 % Discount for BIS
21.2 e(Measurement of insulation resistance [IS 2026 (Part 1)].)	-	570	10 % Discount for BIS
21.2 f(Induced over-voltage withstand test [IS 2026 (Part 3)].)	-	1240	10 % Discount for BIS
21.2 g(Separate-source voltage withstand test [IS 2026 (Part 3)])	-	1240	10 % Discount for BIS
21.5(Pressure and Ester Liquid Leakage Test)	-	5950	10 % Discount for BIS
21.3 b(Temperature-rise test [IS 2026 (Part 2)].)	-	28230	10 % Discount for BIS
21.4 a(Determination of sound levels [IS 2026 (Part 10)];)	-	2600	10 % Discount for BIS
21.4 c(No load current at 112.5 percent voltage (see 6.9.2, 7.9.2, 8.9.2);)	-	1590	10 % Discount for BIS
21.4 e(BDV and Moisture content of liquid in the transformer (IS 16081, IS 16099, IS 16899 or IS 16659, whichever is applicable).)	-	800	10 % Discount for BIS
21.4 d(Paint adhesion test — The test is performed as per ASTM D3359 (Standard Test Methods for measuring adhesion by tape test).)	-	5010	10 % Discount for BIS
6.1 Table 1(Standard Ratings)	-	0	NA
6.2, 7.2, 8.2(Rated Frequency)	-	0	NA
6.3, 7.3(Nominal System Voltage)	-	0	NA
6.4(Table 2 Minimum Basic Insulation Level)	-	0	NA
6.5, 7.5(No-Load Voltage Ratios)	-	0	NA, Already mentioned as above
6.6, 7.6(Winding Connections and Phase Displacement)	-	0	NA, Already mentioned as above
6.7(Tapping Range and Tapping Methods)	-	0	na
6.8(Table 3 Losses and Impedance Values)	-	0	NA, Already mentioned as above
6.9(Permissible Flux Density and Over Fluxing)	-	0	na
6.10(Limits of Temperature-rise)	-	0	NA, Already mentioned as above
7.1(Table 4 Standard Ratings)	-	0	na
7.4(Table 5 Minimum Basic Insulation Level)	-	0	na
7.7(Tapping Ranges and Tapping Methods)	-	0	na
7.8(Losses and Impedance Values)	-	0	NA, Already mentioned as above
7.9(Permissible Flux Density and Overfluxing)	-	0	na
7.10(Limits of Temperature Rise)	-	0	NA, Already mentioned as above
8.1 Table 7(Standard Ratings)	-	0	na
8.3(Nominal System Voltage)	-	0	na
8.5(No Load Voltage Ratio)	-	0	NA
8.6(Number of Phases and Polarity)	-	0	NA
8.4(Table 8 Minimum Basic Insulation Level)	-	0	NA
8.8(Losses and Impedance Values)	-	0	NA, Already mentioned as above
8.9(Permissible Flux Density and Overfluxing)	-	0	NA
8.10(Limits of Temperature Rise)	-	0	NA, Already mentioned as above
9(Standard Materials)	-	0	NA
10(Terminal Arrangement)	-	0	NA
11(Minimum clearances in air)	-	0	NA
12(Connectors (Applicable for bare bushing terminations only))	-	0	NA
13(Marking)	-	0	NA
14(Mounting Arrangement)	-	0	NA
15(Transformer Tank)	-	0	NA
16(Conservator for non-sealed typetransformers)	-	0	NA
18(Efficiency and regulation)	-	0	NA
20(Fittings)	-	0	NA
6.1(Rating)	-	0	NA
6.2(Rated Frequceny)	-	0	NA
6.3(Nominal System Voltage)	-	0	NA
6.4(Basic Insulation Level)	-	0	NA
6.5(No-Load Voltage Ratios)	-	0	NA, Already mentioned as above
6.6(Winding connection and phase displacement)	-	0	NA, Already mentioned as above
6.7(Tapping range and tapping methods)	-	0	NA
6.8(Losses and Impedance Value)	-	0	NA, Already mentioned as above
6.9(Permissible flux density and over fluxing)	-	0	NA
6.10(Limits of temperature-rise)	-	0	NA, Already mentioned as above
7("Technical parameters of three phase distribution transformers higher ")	-	0	NA
8(Technical parameter of single phase distribution transformers)	-	0	NA
10(Terminal Arrangement)	-	0	NA, Already mentioned as above
11(Minimum clearances in air)	-	0	NA
12(Connectors for bare bushing terminations)	-	0	NA
13(Marking)	-	0	NA
15(Trasnformer tank)	-	0	NA
16(Conservator for non-sealed type transformers)	-	0	NA
18(Efficiency and regulations)	-	0	NA
20(Fittings)	-	0	NA
21.2(Routine Tests)	-	0	NA, Already mentioned as above
21.4(Special Test)	-	0	NA, Already mentioned as above
22(Information required with enquiry and order)	-	0	NA
14(Mounting Arrangement)	-	0	NA
21.3 d(Pressure test)	-	0	NA, Already mentioned as above
21.1(General)	-	0	NA

Complete

18 Nov, 2024

18 Nov, 2027

Lightning Impulse test, short circuit withstand tests, short circuit withstand test, moisture contant of in the transformer, Ester liquid leakage test

IS 1180 : Part 1 (2014)

Outdoor Type Oil Immersed Distribution Transformers Upto and Including 2 500 kVA, 33kV - Specification Part 1 Mineral Oil Immersed (Fourth Revision)

2500KVA, 11-0.433KV Three Phase Distribution Transforme

78155 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.2 a)(Measurement of winding resistance )	-	785	10 % Discount for BIS
21.2 b)( Measurement of voltage ratio and check of phase displacemen)	-	909.98	10 % Discount for BIS
21.2 c)( Measurement of short-circuit impedance (principal tapping, when applicable) and load loss at 50 percent and 100 percent load)	-	7430	10 % Discount for BIS
21.2 d)(Measurement of no-load loss and current)	-	5950	10 % Discount for BIS
21.2 e)(Measurement of insulation resistance)	-	570	10 % Discount for BIS
21.2 f)(Induced over-voltage withstand test)	-	1240	10 % Discount for BIS
21.2 g)( Separate-source voltage withstand test)	-	1240	10 % Discount for BIS
21.5.1.2(Pressure test-routine test (For Transformers up to 200 kVA ))	-	5950	10 % Discount for BIS
21.3(b)(Temperature-rise test)	-	28230	10 % Discount for BIS
21.4 a)( Determination of sound levels)	-	2600	10 % Discount for BIS
21.4 d(Paint adhesion tests)	-	5010	10 % Discount for BIS
21.4 e(BDV and moisture content of oil in the transformer)	-	799.99	10 % Discount for BIS
21.5.3.3(Oil leakage test)	-	5950	10 % Discount for BIS
21.5.1.1(Pressure test-Type test (For Transformers up to 200 kVA ))	-	9899.99	10 % Discount for BIS
21.4 c(No load current at 112.5 percent voltage.)	-	1590	10 % Discount for BIS
13.1(Marking (Rating Plates))	-	0	NA
13.2(Terminal Marking Plate)	-	0	NA
21.5.2.3( Oil leakage test (routine test))	-	0	NA, Already mentioned above.
21.5.3.1(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (type test))	-	0	NA, Already mentioned above.
21.5.3.2(For Single Phase Distribution Transformers Up to Including 25 kVA : pressure test (routine test))	-	0	NA, Already mentioned above.
11(Minimum clearance in Air)	-	0	NA, Already mentioned above.
6.8 (50%)(Total losses at 50 % load (Watts))	-	0	NA, Already mentioned above.
7.8 (50%)(Total losses at 50 % load (Watts))	-	0	NA, Already mentioned above.
8.8 (50%)(Total losses at 50 % load (Watts))	-	0	NA, Already mentioned above.
6.8 (100%)(Total losses at 100 % load (Watts))	-	0	NA, Already mentioned above.
7.8 (100%)(Total losses at 100 % load (Watts))	-	0	NA, Already mentioned above.
8.8 (100%)(Total losses at 100 % load (Watts))	-	0	NA, Already mentioned above.
21.5.1.3(Oil leakage test upto 200 KVA)	-	0	NA, Already mentioned above.
15.2(Pressure and Vacuum Requirements)	-	0	NA, Already mentioned above.
6.4(Basic Insulation level )	-	0	NA
6.5(No-Load Voltage Ratios)	-	0	NA, Already mentioned above.
6.6(Winding connections and phase displacement)	-	0	NA, Already mentioned above.
6.8(Losses and impedance values)	-	0	NA, Already mentioned above.
6.1(Limits of Temperature-rise)	-	0	NA, Already mentioned above.
11(Minimum Clearnaces air )	-	0	NA
13(Marking )	-	0	NA
13.3(Marking )	-	0	NA
13.4(Marking)	-	0	NA
13.4.1(Marking)	-	0	NA
14.1(MOUNTING ARRANGEMENT)	-	0	NA
14.2(MOUNTING ARRANGEMENT)	-	0	NA
14.3(MOUNTING ARRANGEMENT)	-	0	NA
14.4(MOUNTING ARRANGEMENT)	-	0	NA
15.1.1(TRANSFORMER TANK : Construction)	-	0	NA
15.1.2(TRANSFORMER TANK : Construction)	-	0	NA
15.1.3(TRANSFORMER TANK : Construction)	-	0	NA
15.1.4(TRANSFORMER TANK : Construction)	-	0	NA
15.1.5(TRANSFORMER TANK : Construction)	-	0	NA
15.5(Total Dry Film Paint Thickness)	-	0	NA, Already mentioned above.
16(Conservator for Non-sealed type Transformers)	-	0	NA
20(Fittings)	-	0	NA
10(Terminal Arrangement)	-	0	NA
6.1(Rating)	-	0	NA
6.2(Rated frequency)	-	0	NA
6.3(Nominal system voltage)	-	0	NA
10(Terminal arrangment )	-	0	NA
12(Connectors )	-	0	NA
14(Mounting arrangement)	-	0	NA
15(Trasnformer Tank )	-	0	NA
16(Conservator for Non-Sealed type Transformers)	-	0	NA
18(Efficiency and regulation)	-	0	NA
20(Fittings)	-	0	NA
21.5.2.2(routine test :For Transformers Above 200 kVA and Up to Including 2 500 kVA)	-	0	NA, Already mentioned above.
21.5.3.3(Oil leakage test (routine test))	-	0	NA, Already mentioned above.
18(Efficiency and Regulation)	-	0	NA
6.7(Tapping Range and Tapping Method)	-	0	NA