BIS - LIMS (Laboratory Information Management System)

IEC TEST LABS LLP

Ground Floor, Plot No. N-47, Pkt-N, Sector-5, Bawana, DSIDC, Delhi-110039, Delhi, North West, Delhi, 110039

9871727340 iectestlabs@gmail.com

Scope List

Reset

42 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 16246 (2015)

Elastomer insulated cables with limited circuit integrity when affected by fire - Specification

85000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.1( Cables for Fixed Installation)	-	1000	-
Cl.5( INSULATION)	-	1000	-
Cl. 6.1( Glass Tape)	-	1000	-
Cl 6.2( Polyethylene Teraphthalate (PETP) or Polypropylene base Tape)	-	1000	-
Cl 6.4( Fire Barrier Tape)	-	1000	-
Cl 7(CENTRE AND FILLERS)	-	1000	-
Cl 7(CENTRE AND FILLERS)	-	1000	-
Cl 7(CENTRE AND FILLERS)	-	1000	-
Cl 7(CENTRE AND FILLERS)	-	1000	-
Cl 8( ARMOUR)	-	1000	-
Cl 9.1( Inner Sheath)	-	1000	-
Cl 9.2( Outer Sheath)	-	1000	-
Cl 10.1( CONDUCTORS)	-	1000	-
Cl 10.2( CONDUCTORS)	-	1000	-
Cl 11.1( INSULATION)	-	1000	-
Cl 11.2(Thickness of Insulation IS 10810 : Part 6)	-	2000	-
Cl 12( CORE IDENTIFICATION)	-	1000	-
Cl 13( LAYING UP OF CORES)	-	1000	-
Cl 14.2( Thickness of Inner Sheath IS 10810 : Part 6)	-	2000	-
Cl 15.1( ARMOURING)	-	1000	-
Cl 15.3.1( Type of Armour)	-	1000	-
Cl 15.3.2( Type of Armour)	-	1000	-
Cl 15.3.3( ARMOURING)	-	1000	-
Cl 15.3.3( ARMOURING)	-	1000	-
Cl 15.4.1( ARMOURING)	-	1000	-
Cl 15.4.2( ARMOURING)	-	1000	-
Cl 15.4.2( ARMOURING)	-	1000	-
Cl 15.4.2( ARMOURING)	-	1000	-
Cl 15.4.2( ARMOURING)	-	1000	-
Cl 15.4.2( ARMOURING)	-	1000	-
Cl 15.4.2( ARMOURING)	-	1000	-
Cl 15.4.2( ARMOURING)	-	1000	-
Cl 16.2( OUTER SHEATH)	-	1000	-
Cl 16.3( Thickness of Outer Sheath - Avg IS 10810 : Part 6)	-	2000	-
Cl 16.3( Thickness of Outer Sheath - Minimum IS 10810 : Part 6)	-	2000	-
Cl 17.2(Annealing test (for copper) IS 10810 : Part 1)	-	2000	-
Cl 17.2(Conductor resistance test IS 10810 : Part 5)	-	2000	-
Cl 17.1(Persulphate test (tinned copper conductor) IS 10810 : Part 4)	-	5000	-
Cl 17.2(Tensile strength before ageing on insulation IS 10810 : Part 7)	-	2000	-
Cl 17.2(elongation at break before ageing on insulation IS 10810 : Part 7)	-	2000	-
Cl 17.2(Tensile strength after Ageing in air bomb IS 10810 : Part 56)	-	5000	-
Cl 17.2(Elongation after Ageing in air bomb IS 10810 : Part 56)	-	5000	-
Cl 17.2(Tensile strength variation)	-	5000	-
Cl 17.2(Elongation Variation)	-	5000	-
Cl 17.2(Hot set elongation on insulation IS 10810 : Part 30)	-	2000	-
Cl 17.2(Permanent elongation (set) on insulation IS 10810 : Part 30)	-	2000	-
Cl 17.1(Tensile strength before ageing on sheath IS 10810 : Part 7)	-	2000	-
Cl 17.1(elongation at break before ageing on sheath IS 10810 : Part 7)	-	2000	-
Cl 17.1(Hot set elongation test on sheath IS 10810 : Part 30)	-	2000	-
Cl 17.1(Permanent elongation (set) test on sheath IS 10810 : Part 30)	-	2000	-
Cl 17.1(Oxygen index test on sheath IS 10810 : Part 58)	-	5000	-
Cl 17.1(Temperature index test on sheath IS 10810 : Part 64)	-	5000	-
Cl 17.1(Acid gas generation on sheath IS 10810 : Part 39)	-	5000	-
Cl 17.2(Insulation resistance test IS 10810 : Part 43)	-	2000	-
Cl 17.1(Water absorption test (for insulation) IS 10810 : Part 28)	-	10000	-
Cl 18.2(High Voltage Test IS 10810 : Part 45)	-	2000	-
Cl 18.2(High Voltage Test IS 10810 : Part 45)	-	2000	-
Cl 18.3 Annex B of IS 16246( Circuit Integrity Test Under Fire Condition)	-	25000	-
Cl 18.3 Annex B of IS 16246( Circuit Integrity Test Under Fire Condition)	-	25000	-
Cl 18.4.1( Flame Retardence Test on Single Cable IS 10810 : Part 61)	-	10000	-
Cl 18.4.2(Flame Retardence Test on Bunched Cables IS 10810 : Part 63)	-	10000	-
Cl 19.1( Manufacturer’s Identification)	-	1000	-
Cl 19.2( Voltage Identification)	-	1000	-
Cl 19.3( Cable Identification)	-	1000	-
Cl 19.4( Cable Code)	-	1000	-

07 Sep, 2026

-
Included w.e.f.18.08.2025

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

140000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires Before Stranding)	-	1000	Rs. 20000/- [Up to 100 Sq.mm], Rs. 110000/- [150 & 200 Sq.mm] Rs. 120000/- [400 & 560 Sq.mm] Rs. 140000/- [420 & 520 Sq.mm]
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (mech)(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (mech)(Diameter of Steel Wires After Stranding)	-	1000	-
10 (elec)(Stranding)	-	1000	-
10 (elec)(Stranding)	-	1000	-
10 (elec)(Stranding)	-	1000	-
10 (mech)(Stranding)	-	1000	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	1000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
13.3 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	1000	-
13.3 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	1000	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	1000	-
13.5.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	-
13.5.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	1000	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	1000	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	1000	-
13.7.2 (chem)(Mass of Zinc coating)	-	1000	-
13.7.2 (chem)(Uniformity of Zinc coating)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.9 (elec)(Surface condition test)	-	20000	-
13.10 (elec)(Ultimate breaking load)	-	20000	-
13.11 (elec)(Stress-strain test)	-	80000	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	1000	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	1000	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	1000	-
13.7.2 (elec)(Mass of Zinc coating)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	1000	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	1000	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1000	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	1000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	1000	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	1000	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	1000	-
10 (elec)(Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	1000	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	1000	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	1000	-
4.1(Resistivity)	-	2000	-
4.2(Density)	-	2000	-
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	2000	-
4.4(Coefficient of Linear Expansion)	-	2000	-
5.1(Density)	-	2000	-
5.2(Coefficient of Linear Expansion)	-	2000	-
14.2(a), 8.2.1(Sizes)	-	2000	-
7(FREEDOM FROM DEFECTS)	-	2000	-
6.2(zinc Purity)	-	2000	-
9(Joint in wires)	-	2000	-
6.1.1(Aluminum wires shall conform to IS 5484)	-	2000	-
6.1.2(The mechanical properties of wire shall comply with the requirements given in Table 2)	-	1000	-
6.2(It shall conform to and satisfy all the requirements of IS 209)	-	1000	-
8.2.2(Calculated resistance)	-	1000	-
Cl-9.2.5(Welded joint strength)	-	2000	-

07 Sep, 2026

-
-

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2000	-
IS 191:2007 & IS 440(Copper purity test)	-	5000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	2000	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	5000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	5000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	5000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	5000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	5000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	5000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	5000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	2000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	5000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	5000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	5000	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	2000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	3000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	3000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	2000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	2000	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	2000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	5000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	30000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	40000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	2000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	15000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	15000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	10000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	10000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	5000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	5000	-
IS 191:2007 & IS 440(Copper purity test)	-	10000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	5000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	5000	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	10000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	10000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	5000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	5000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	5000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	10000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	20000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	10000	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	5000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	5000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	5000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	5000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	5000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	10000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	20000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	50000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	5000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	20000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	20000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	10000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	10000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	10000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	10000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	10000	-
IS 191:2007 & IS 440(Copper purity test)	-	20000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	10000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	10000	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	10000	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	10000	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	10000	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	10000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	10000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	10000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	10000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	10000	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	10000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	10000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	10000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	10000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	10000	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	10000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	10000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	10000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	10000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	10000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	10000	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	10000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	10000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	10000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	10000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	1000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	10000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	10000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	10000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	10000	-

07 Sep, 2026

-
Included w.e.f.18.08.2025

IS 17293 (2020)

Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c.

1020000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2000	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	5000	-
IS 191 : 2007, IS 440(Copper purity test)	-	5000	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	10000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	2000	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	5000	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	10000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	3000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	3000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	10000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	10000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	10000	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	2000	-
Annex - B of IS 17293:2020(Compatibility test)	-	10000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	2000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2000	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	2000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	10000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	10000	-
Annex - B of IS 17293:2020(Compatibility test)	-	10000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	2000	-
Annex - E of IS 17293 : 2020(UV resistance)	-	100000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	10000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	10000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	10000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
11.2.2(Spark Test)	-	10000	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	100000	-
11.2.5(Surface Resistance of Sheath)	-	10000	-
11.3.1(Sheath Colour)	-	2000	-
11.3.2(Sheath Marking)	-	2000	-
11.3.3(Overall Diameters and Ovality)	-	2000	-
Annex J(Assessment of Halogens)	-	10000	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	5000	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	5000	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	5000	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	700000	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	50000	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	50000	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	10000	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	10000	-
5.2(Application to the Conductor)	-	2000	-
5.3(Thickness)	-	2000	-
6.2(Sheath application)	-	2000	-
6.3(Sheath Thickness)	-	2000	-
6.4(Sheath Colour)	-	2000	-
7(Overall Dimension)	-	2000	-
8.1(Continuity of Marking)	-	2000	-
8.2(Durability)	-	2000	-
8.3(Legibility)	-	2000	-
9(Core Identification)	-	2000	-
12(Packing and Marking)	-	2000	-
4.1(Resistance)	-	5000	-
7.1.2.1, 7.2.3(Annealing)	-	2000	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	5000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	5000	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2000	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	5000	-
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	10000	-
IS 191 : 2007, IS 440(Copper purity test)	-	5000	-
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	10000	-
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	2000	-
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	10000	-
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	20000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	10000	-
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	10000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	10000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	10000	-
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	10000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	10000	-
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	-
Annex - B of IS 17293:2020(Compatibility test)	-	5000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	-
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	5000	-
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	2000	-
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	5000	-
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	5000	-
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	5000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	20000	-
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	20000	-
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	5000	-
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	20000	-
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	20000	-
Annex - B of IS 17293:2020(Compatibility test)	-	20000	-
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	5000	-
Annex - E of IS 17293 : 2020(UV resistance)	-	30000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	20000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	20000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	20000	-
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	20000	-
11.2.2(Spark Test)	-	5000	-
11.2.4(Long-term Resistance of Insulation to d.c.)	-	20000	-
11.2.5(Surface Resistance of Sheath)	-	20000	-
11.3.1(Sheath Colour)	-	1000	-
11.3.2(Sheath Marking)	-	1000	-
11.3.3(Overall Diameters and Ovality)	-	2000	-
Annex J(Assessment of Halogens)	-	20000	-
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	20000	-
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	20000	-
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	5000	-
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	500000	-
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	10000	-
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	10000	-
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	10000	-
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	10000	-
5.2(Application to the Conductor)	-	2000	-
5.3(Thickness)	-	2000	-
6.2(Sheath application)	-	1000	-
6.3(Sheath Thickness)	-	2000	-
6.4(Sheath Colour)	-	2000	-
7(Overall Dimension)	-	2000	-
8.1(Continuity of Marking)	-	2000	-
8.2(Durability)	-	2000	-
8.3(Legibility)	-	2000	-
9(Core Identification)	-	2000	-
12(Packing and Marking)	-	2000	-
4.1(Resistance)	-	5000	-
7.1.2.1, 7.2.3(Annealing)	-	5000	-
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	30000	-

07 Sep, 2026

-
Included w.e.f.29.07.2025

IS 12776 (2002)

Galvanized strand for earthing - Specification (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Freedom From Defects (IS 12776))	-	1000	-
5.3(Joints in wires (IS 12776))	-	1000	-
6- Annex-A, Sl-2(Size of the wire (IS 12776))	-	1000	-
6- Annex-A, Sl-8(Lay (IS 12776))	-	1000	-
8.1-Annex-A,Sl-9(Breaking Force of Strand (IS 12776))	-	5000	-
8.2-Annex-A,Sl-6(Elongation of wire, IS 10810(Part-37))	-	2000	-
8.2-Annex-A,Sl-3(Tensile Strength of wire IS 10810(Part-37))	-	2000	-
8.3-Annex-A,Sl-12(Resistance at 200 C (IS 12776))	-	2000	-
8.4(Wrapping Test (IS 12776))	-	2000	-
8.5-Annex-A-Sl-7a(Amount of zinc Coating (IS 6745))	-	2000	-
8.5-Annex-A-Sl-7b(Uniformity of Coating (IS 2633))	-	2000	-
8.5-Annex-A-Sl-4(Torsion Test IS 10810(Part-37))	-	2000	-
4.1(Carbon- IS 228(Part 1))	-	2000	-
4.1(Sulphur- IS 228(Part 9))	-	2000	-
4.1(Phosphorous- IS 228(Part 3))	-	2000	-
4.1(Manganese- IS 228(Part 2))	-	2000	-
4.1(Silicon- IS 228(Part 8))	-	2000	-
6- Annex-A, Sl-8(Lay Length)	-	1000	-
5.2(Freedom From Defects (IS 12776))	-	1000	-
5.3(Joints in wires (IS 12776))	-	1000	-
6- Annex-A, Sl-2(Size of the wire (IS 12776))	-	1000	-
6- Annex-A, Sl-8(Lay (IS 12776))	-	1000	-
8.1-Annex-A,Sl-9(Breaking Force of Strand (IS 12776))	-	5000	-
8.2-Annex-A,Sl-6(Elongation of wire, IS 10810(Part-37))	-	2000	-
8.2-Annex-A,Sl-3(Tensile Strength of wire IS 10810(Part-37))	-	2000	-
8.3-Annex-A,Sl-12(Resistance at 200 C (IS 12776))	-	2000	-
8.4(Wrapping Test (IS 12776))	-	2000	-
8.5-Annex-A-Sl-7a(Amount of zinc Coating (IS 6745))	-	2000	-
8.5-Annex-A-Sl-7b(Uniformity of Coating (IS 2633))	-	2000	-
8.5-Annex-A-Sl-4(Torsion Test IS 10810(Part-37))	-	2000	-
4.1(Carbon- IS 228(Part 1))	-	2000	-
4.1(Sulphur- IS 228(Part 9))	-	2000	-
4.1(Phosphorous- IS 228(Part 3))	-	2000	-
4.1(Manganese- IS 228(Part 2))	-	2000	-
4.1(Silicon- IS 228(Part 8))	-	2000	-
6- Annex-A, Sl-8(Lay Length)	-	2000	-
5.2(Freedom From Defects (IS 12776))	-	1000	-
5.3(Joints in wires (IS 12776))	-	1000	-
6- Annex-A, Sl-2(Size of the wire (IS 12776))	-	2000	-
6- Annex-A, Sl-8(Lay (IS 12776))	-	2000	-
8.1-Annex-A,Sl-9(Breaking Force of Strand (IS 12776))	-	3000	-
8.2-Annex-A,Sl-6(Elongation of wire, IS 10810(Part-37))	-	3000	-
8.2-Annex-A,Sl-3(Tensile Strength of wire IS 10810(Part-37))	-	2000	-
8.3-Annex-A,Sl-12(Resistance at 200 C (IS 12776))	-	3000	-
8.4(Wrapping Test (IS 12776))	-	2000	-
8.5-Annex-A-Sl-7a(Amount of zinc Coating (IS 6745))	-	2000	-
8.5-Annex-A-Sl-7b(Uniformity of Coating (IS 2633))	-	2000	-
8.5-Annex-A-Sl-4(Torsion Test IS 10810(Part-37))	-	2000	-
4.1(Carbon- IS 228(Part 1))	-	2000	-
4.1(Sulphur- IS 228(Part 9))	-	2000	-
4.1(Phosphorous- IS 228(Part 3))	-	2000	-
4.1(Manganese- IS 228(Part 2))	-	2000	-
4.1(Silicon- IS 228(Part 8))	-	2000	-
6- Annex-A, Sl-8(Lay Length)	-	1000	-

07 Sep, 2026

-
Included .w.e.f.18.07.2025

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	2000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	2000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	2000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	2000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	2000	-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	2000	-
16.5, Table 2(Breaking Load Test - before stranding)	-	2000	-
16.5, Table 2(Breaking Load Test - after stranding)	-	3000	-
16.6, Table 1(Elongation Test - before stranding)	-	2000	-
16.6, Table 1(Elongation Test - after stranding)	-	3000	-
16.7, Table 2(Resistivity Test)	-	5000	-
16.8(Wrapping Test)	-	2000	-
11(Stranding)	-	2000	-
8(Freedom from defects)	-	2000	-
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	30000	-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	5000	-
16.11(Stress-strain Test)	-	100000	-
16.2(Visual Examination)	-	2000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	2000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	2000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	2000	-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	2000	-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	2000	-
16.5, Table 2(Breaking Load Test - before stranding)	-	3000	-
16.5, Table 2(Breaking Load Test - after stranding)	-	3000	-
16.6, Table 1(Elongation Test - before stranding)	-	3000	-
16.6, Table 1(Elongation Test - after stranding)	-	3000	-
16.7, Table 2(Resistivity Test)	-	5000	-
16.8(Wrapping Test)	-	3000	-
11(Stranding)	-	2000	-
8(Freedom from defects)	-	2000	-
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	30000	-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	5000	-
16.11(Stress-strain Test)	-	100000	-

07 Sep, 2026

-
Included w.e.f.27.06.2025

IS 8783 : Part 4 : Sec 3 (1995)

Winding wires for submersible motors - Specification: Part 4 specification for individual wires: Sec 3 polyester and polypropylene insulated winding wires (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(The winding wire shall either be wound on spools / reels conforming to IS 482-1981. or supplied in a coils packed and labelled.)	-	500	-
6.1(The winding wire shall carry following information marked on the lable on spool / reel / coil;)	-	500	-
6.1(a) Reference to this Indian Standard;)	-	500	-
6.1(b) Manufacturer's name,brand name or trade-mark;)	-	500	-
6.1(c) Size of conductor / maximum overall diameter,)	-	1000	-
6.1(d) Length of conductor on spool / reel /coil;)	-	500	-
6.1(e) Number of lengths onspool / reel / coil (if more than one);)	-	500	-
6.1(f) Country of Manufacturer)	-	500	-
6.1(g) Year of Manufacture.)	-	500	-
6.2(BIS Certification Mark)	-	500	-
4(i) Material)	-	500	-
5(ii) Diameter [mm] Seperate wire:)	-	1000	-
5(ii) Diameter [mm] Wire taken from cable:)	-	1000	-
5(iii) Annealing test [Percentage] on Seperate wire:)	-	1000	-
5(iii) Annealing test [Percentage] on Wire taken from cable:)	-	1000	-
5(d) Resistance test [Ohm/km corrected to 20°c)	-	1000	-
4.1, table 1 & 2(a) Thickness of Polyster (mm))	-	1000	-
4.1, table 1 & 3(b) Thickness of Polypropylene (mm))	-	1000	-
4.1, table 1 & 4(c) Total thickness of Insulation(mm))	-	1000	-
4.2(Application of insulation)	-	500	-
4.3(Colour of Insuation)	-	500	-
4.4(Overall diameter (mm))	-	1000	-
4(Before ageing Tensile strength [N/mm²])	-	2000	-
4(Before ageing Elongation at break [Percentage])	-	2000	-
4(After ageing Tensile strength [N/mm²])	-	2000	-
4(Variation on tensile strangth [Percentage])	-	2000	-
4(After ageing Elongation at break [Percentage])	-	2000	-
4(Variation on elongation at break [Percentage])	-	2000	-
4(Shrinkage test [Percentage])	-	1000	-
4(After Shrinkage Cracks found.)	-	2000	-
4.1(Water absorption test [Gravimetric] [mg/cm²])	-	3000	-
4.1(Hot Deformation test [depth of indentation) [Percentage])	-	2000	-
4.1(Heat Shock Test - No cracks found)	-	1000	-
4.5(High Voltage test [Water Immersion test] 3 KV for 1 Minute)	-	2000	-
4.1(Insulation Resistance test [ohm-cm] At 27 ºC)	-	1000	-
4.1([Insulation Resistance test [ohm-cm] At 90 ºC)	-	1000	-
5(The winding wire shall either be wound on spools / reels conforming to IS 482-1981. or supplied in a coils packed and labelled.)	-	1000	-
6(The winding wire shall carry following information marked on the lable on spool / reel / coil;)	-	1000	-
6(a) Reference to this Indian Standard;)	-	500	-
6(b) Manufacturer's name,brand name or trade-mark;)	-	500	-
6(c) Size of conductor / maximum overall diameter,)	-	500	-
6(d) Length of conductor on spool / reel /coil;)	-	500	-
6(e) Number of lengths onspool / reel / coil (if more than one);)	-	500	-
6(f) Country of Manufacturer Marking)	-	500	-
6(g) Year of Manufacture.)	-	500	-
6.2(BIS Certification Mark)	-	500	-
4(i) Material)	-	500	-
4(ii) Diameter [mm] Seperate wire:)	-	1000	-
4(ii) Diameter [mm] Wire taken from cable)	-	1000	-
4(iii) Annealing test [Percentage] on Seperate wire:)	-	1000	-
4([iii) Annealing test [Percentage] on Wire taken from cable:)	-	1000	-
4(d) Resistance test [Ohm/km corrected to 20°c])	-	1000	-
4(a) Thickness of Polyster (mm))	-	1000	-
4(b) Thickness of Polypropylene (mm))	-	1000	-
4(c) Total thickness of Insulation(mm))	-	1000	-
4(Application of insulation)	-	500	-
4(Colour of Insuation)	-	500	-
4(Overall diameter (mm))	-	1000	-
4(Before ageing Tensile strength [N/mm²])	-	1000	-
4(Before ageing Elongation at break [Percentage])	-	1000	-
4(After ageing Tensile strength [N/mm²])	-	2000	-
4(Variation on tensile strangth [Percentage])	-	2000	-
4(After ageing Elongation at break [Percentage])	-	2000	-
4(Variation on elongation at break [Percentage])	-	2000	-
4(Shrinkage test [Percentage])	-	1000	-
4(After Shrinkage Cracks found.)	-	1000	-
4(Water absorption test [Gravimetric] [mg/cm²])	-	2000	-
4(Hot Deformation test [depth of indentation) [Percentage])	-	2000	-
4(Heat Shock Test - No cracks found Physical)	-	1000	-
4(High Voltage test [Water Immersion test] 3 KV for 1 Minute)	-	1000	-
4(Insulation Resistance test [ohm-cm] At 27 ºC)	-	1000	-
4(Insulation Resistance test [ohm-cm] At 90 ºC)	-	1000	-
Clause No. 3(Insulation Resistance (Volume Resistivity at test temperature 90 º C ))	-	1000	-
Clause No. 3(Water absorption)	-	2000	-
Clause No. 3(Hot Deformation)	-	2000	-
Clause No. 3(Shrinkage)	-	1000	-
Clause No. 3(Heat Shock)	-	1000	-
Clause No. 3(Thickness of Insulation)	-	1000	-
Clause No. 3(Annealing Test)	-	1000	-
Clause No. 3(Conductor Diameter)	-	1000	-
Clause No. 3(Overall Dimensions)	-	1000	-
Clause No. 3(Insulation Resistance (Volume Resistivity at 27º C ))	-	1000	-
Clause No. 3(High Voltage Test (Water Immersion test) at room temperature)	-	2000	-
Clause No. 3(Conductor Resistance)	-	1000	-
Table 1, Cl. 4.1, VI(Water Absorbtion Test (Gravimetric))	-	2000	-
Cl. 4.1 of IS: 8783 (Pt-2)(Insulation Resistance Test)	-	1000	-
Cl. 4.1 of IS: 8783 (Pt-2)(Insulation Resistance Test)	-	1000	-
Cl.4.1 of IS: 8783 (Pt-2):1995(Physical Test for Insulation after Ageing (on finished wire))	-	2000	-

07 Sep, 2026

-
Included w.e.f.09.07.2025

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	500	10% discount to BIS
5(General conditions for the tests)	-	500	10% discount to BIS
6(Classification)	-	1000	10% discount to BIS
7(Marking and instructions)	-	500	10% discount to BIS
8(Protection against access to live parts)	-	1000	10% discount to BIS
10(Power input and current)	-	1000	10% discount to BIS
11(Heating)	-	1000	10% discount to BIS
13(Leakage current and electric strength at operating temperature)	-	1000	10% discount to BIS
14(Transient overvoltages)	-	500	10% discount to BIS
15(Moisture resistance)	-	5000	10% discount to BIS
16(Leakage current and electric strength)	-	1000	10% discount to BIS
17(Overload protection of transformers and associated circuits)	-	500	10% discount to BIS
19(Abnormal operation)	-	1000	10% discount to BIS
20(Stability and mechanical hazards)	-	1000	10% discount to BIS
21(Mechanical strength)	-	1000	10% discount to BIS
22(Construction)	-	2000	10% discount to BIS
23(Internal wiring)	-	500	10% discount to BIS
24(Components)	-	500	10% discount to BIS
25(Supply connection and external flexible cords)	-	500	10% discount to BIS
26(Terminals for external conductors)	-	500	10% discount to BIS
27(Provision for earthing)	-	500	10% discount to BIS
28(Screws and connections)	-	500	10% discount to BIS
29(Clearances, creepage distances and solid insulation)	-	500	10% discount to BIS
30(Resistance to heat and fire)	-	1000	10% discount to BIS
31(Resistance to rusting)	-	500	10% discount to BIS
32(Radiation, toxicity and similar hazards)	-	500	10% discount to BIS
A.101(Pressure test)	-	500	10% discount to BIS
12(Charging of metal-ion batteries)	-	500	10% discount to BIS
22.101(rated pressure)	-	500	10% discount to BIS
22.102(Closed water heaters)	-	500	10% discount to BIS
22.103(Addition)	-	500	10% discount to BIS
22.104(Addition)	-	500	10% discount to BIS
22.105(Cistern-type water heaters)	-	500	10% discount to BIS
22.109(Addition)	-	500	10% discount to BIS
19.11.4.4(Surge immunity test)	-	1000	10% discount to BIS
9(Starting of motor-operated appliances)	-	500	10% discount to BIS
18(Endurance)	-	500	10% discount to BIS
4(General requirement)	-	-	-
5(General conditions for the tests)	-	-	-
6(Classification)	-	-	-
7(Marking and instructions)	-	-	-
8(Protection against access to live parts)	-	-	-
10(Power input and current)	-	-	-
11(Heating)	-	-	-
13(Leakage current and electric strength at operating temperature)	-	-	-
14(Transient overvoltages)	-	-	-
15(Moisture resistance)	-	-	-
16(Leakage current and electric strength)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
19(Abnormal operation)	-	-	-
20(Stability and mechanical hazards)	-	-	-
21(Mechanical strength)	-	-	-
22(Construction)	-	-	-
23(Internal wiring)	-	-	-
24(Components)	-	-	-
25(Supply connection and external flexible cords)	-	-	-
26(Terminals for external conductors)	-	-	-
27(Provision for earthing)	-	-	-
28(Screws and connections)	-	-	-
29(Clearances, creepage distances and solid insulation)	-	-	-
30(Resistance to heat and fire)	-	-	-
31(Resistance to rusting)	-	-	-
32(Radiation, toxicity and similar hazards)	-	-	-
A.101(Pressure test)	-	-	-
12(Charging of metal-ion batteries)	-	-	-
22.101(rated pressure)	-	-	-
22.102(Closed water heaters)	-	-	-
22.103(Addition)	-	-	-
22.104(Addition)	-	-	-
22.105(Cistern-type water heaters)	-	-	-
22.109(Addition)	-	-	-
19.11.4.4(Surge immunity test)	-	-	-
9(Starting of motor-operated appliances)	-	-	-
18(Endurance)	-	-	-

07 Sep, 2026

-
Included w.e.f 07.05.2025 Exclusion Cl 19.11.4.1- 19.11.4.7(EMI/EMC)

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	600	-
6(Classification)	-	600	-
11.8(Temperature rise)	-	600	-
11.7(Duration corresponding)	-	600	-
11.6(Combined appliances)	-	600	-
11.5(Motor-operated appliances)	-	600	-
11.4(Heating appliances)	-	600	-
8.1.5(Live parts of built-in appliances)	-	600	-
18(Endurance)	-	600	-
17(Overload protection of transformers and associated circuits)	-	600	-
16(Leakage current and electric strength)	-	600	-
4(General requirement)	-	600	-
32(Radiation Toxicity and Similar Hazards)	-	600	-
31(Resistance to Rusting)	-	600	-
30.2(Needle Flame Test)	-	600	-
30.2(Glow Wire Test)	-	600	-
30.1(Ball pressure test)	-	600	-
29(clearance, creepage distances and solid insulation)	-	600	-
28(Screw test and connections)	-	600	-
27(Provision for earthing)	-	600	-
26(Terminals for external conductors)	-	600	-
25(Supply connection and external flexible cords)	-	600	-
24(Components)	-	600	-
23(Internal wiring)	-	600	-
22(Construction)	-	600	-
21(Mechanical Strength)	-	600	-
20(Stability and mechanical hazards)	-	600	-
19(Abnormal Operation)	-	600	-
18(Endurance)	-	600	-
17(Over Load Protection of Transformers and associated circuits)	-	600	-
16.3(Electric Strength (after clause 15 and 16.2))	-	600	-
16.2(Leakage Current (after Clause 15))	-	600	-
16.1(General)	-	600	-
15.3(Humidity Test)	-	600	-
15.2(Spillage Test)	-	600	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	600	-
15.0(Moisture resistance)	-	600	-
14(Transient Over Voltages)	-	600	-
13.3(Electric Strength at operating temperature)	-	600	-
13.2(Leakage current at operating temperature)	-	600	-
13(Leakage current and electric strength at operating temperature)	-	600	-
11.3(Heating)	-	600	-
11.2(General)	-	600	-
11.1(General)	-	600	-
10.2(Current input)	-	600	-
10.1(Power input)	-	600	-
9(Starting of motor operation test requirements and tests)	-	600	-
8.1.4(Protection against live parts against protective impedance)	-	700	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	600	-
8.1.2(Protection against live parts in openings)	-	600	-
8.1.1(Protection against live parts in all positions)	-	600	-
7(Marking and instructions)	-	600	-
A.2(Earth continuity test)	-	700	-
Annex C(Ageing test on motors)	-	600	-
Annex D(Thermal motor protectors)	-	600	-
19.17(Abnormal operation)	-	600	-
20.1(Stability and mechanical hazards)	-	600	-
21.2(Mechanical strength)	-	700	-
21.3(Mechanical strength)	-	600	-
22.5(Construction)	-	700	-
22.6(Construction)	-	600	-
22.11(Construction)	-	700	-
22.16(Construction)	-	600	-
22.32(Construction)	-	700	-
22.42(Construction)	-	600	-
23.3(Internal wiring)	-	700	-
25.7(Supply connection and external flexible cords)	-	700	-
25.14(Supply connection and external flexible cords)	-	600	-
25.15(Supply connection and external flexible cords)	-	700	-
26.5(Terminals for external conductors)	-	600	-
27.5(Provision for earthing)	-	700	-
28.1(Screws and connections)	-	600	-
B.22.1(Construction)	-	700	-
B.22.3(Construction)	-	600	-
B.22.4(Construction)	-	600	-
B.22.5(Construction)	-	700	-
19.11.4.4(Surge immunity test)	-	600	-
5(General conditions for the tests)	-	700	-
25(Supply connection and external flexible cords)	-	600	-
16.0(General)	-	700	-
15.2(Moisture resistance)	-	600	-

07 Sep, 2026

-
Included w.e.f.25.03.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC)

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

626400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	10000	20% Discount to BIS
Cl-4.2(Secondary Cells and Batteries)	-	10000	20% Discount to BIS
Cl-4.3(General Operating Conditions)	-	10000	20% Discount to BIS
Cl-4.3.8(Storage)	-	10000	20% Discount to BIS
Cl-4.3.9(Operating Temperature)	-	10000	20% Discount to BIS
Cl-5.1(Mechanical Endurance)	-	10000	20% Discount to BIS
Cl-5.2(Charge Efficiency)	-	10000	20% Discount to BIS
Cl-5.3(Deep Discharge Protection)	-	10000	20% Discount to BIS
Cl-5.4(Marking)	-	10000	20% Discount to BIS
Cl-5.5(Safety)	-	10000	20% Discount to BIS
Cl-5.6(Documentation)	-	10000	20% Discount to BIS
Cl-6(Functional characteristice)	-	10000	20% Discount to BIS
Cl-7(General test conditions)	-	10000	20% Discount to BIS
Cl-8.1(Capacity Test)	-	10000	20% Discount to BIS
Cl-8.2(Endurance Test)	-	226400	20% Discount to BIS
Cl-8.3(Charge Retention Test)	-	10000	20% Discount to BIS
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	200000	20% Discount to BIS
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	10000	20% Discount to BIS
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	10000	20% Discount to BIS
Cl-9.1(Type Tests)	-	10000	20% Discount to BIS
Cl-9.2(Acceptance Test)	-	10000	20% Discount to BIS
4.3.7.1(Specific gravity)	-	10000	20% Discount to BIS

07 Sep, 2026

-
Included.w.e.f.24.12.2024

IS 191 (2007)

Copper - Specification (Fourth Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4-Table 1(GRADES/DESIGNATIONS)	-	100	10% discount to BIS
5.1- Table 2(L)	-	100	10% discount to BIS
5.1- Table 2(L1)	-	100	10% discount to BIS
5.1- Table 2(h)	-	100	10% discount to BIS
5.1- Table 2(h1)	-	100	10% discount to BIS
5.1- Table 2(b)	-	100	10% discount to BIS
5.1- Table 2(b1)	-	100	10% discount to BIS
5.1- Table 2(R)	-	100	10% discount to BIS
5.1- Table 2(R1)	-	100	10% discount to BIS
5.1- Table 2(R2 )	-	100	10% discount to BIS
5.1- Table 2(α )	-	100	10% discount to BIS
5.1- Table 2( β )	-	100	10% discount to BIS
5.1- Table 2(γ)	-	100	10% discount to BIS
5.2(Billets)	-	100	10% discount to BIS
5.4-Table 3 (For Billets)(Mass)	-	100	10% discount to BIS
5.2-Table 3 (For Billets)(Diameter)	-	100	10% discount to BIS
5.2-Table 3 (For Billets)(Length)	-	100	10% discount to BIS
5.2-Table 3 (For Billets)(Deviation from straightness per 1000 mm length)	-	100	10% discount to BIS
5.4-Table 3 (Vertically continuously cast wire bars)(Mass)	-	100	10% discount to BIS
5.3-Table 3 (Vertically continuously cast wire bars)(Width)	-	100	10% discount to BIS
5.3-Table 3 (Vertically continuously cast wire bars)(thickness )	-	100	10% discount to BIS
5.3-Table 3 (Vertically continuously cast wire bars)(Other dimention)	-	100	10% discount to BIS
5.4-Table 3 (Vertically static cast wire bars)(Mass)	-	100	10% discount to BIS
5.3-Table 3 (Vertically static cast wire bars)(Width)	-	100	10% discount to BIS
5.3-Table 3 (Vertically static cast wire bars)(thickness )	-	100	10% discount to BIS
5.3-Table 3 (Vertically static cast wire bars)(Other dimention)	-	100	10% discount to BIS
5.4-Table 3 (Ingots)(Mass)	-	100	10% discount to BIS
5.4-Table 3 (Cast cakes)(Mass)	-	100	10% discount to BIS
5.3-Table 3 (Cast cakes)(thickness )	-	100	-
5.3-Table 3 (Cast cakes)(Deviation from straightness per 1000 mm length)	-	100	-
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	100	10% discount to BIS
7.1 - Table 4(Silver- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	100	10% discount to BIS
7.1 - Table 4(Phosphorus- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Arsenic- IS440)	-	100	10% discount to BIS
7.1 - Table 4(Antimony-IS440)	-	100	10% discount to BIS
7.1 - Table 4(Bismuth-IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Iron IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Lead IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Nickel IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Oxygen IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Selenium - IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Sulphur- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Tellurium- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Tin - IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Znic-IS 440)	-	100	-
7.1 - Table 4(Selenium + Telluuium- IS 440)	-	100	-
7.1 - Table 4(Total Impurities- IS 440)	-	100	-
8.1(FREEDOM FROM DEFECTS)	-	100	10% discount to BIS
8.2(FREEDOM FROM DEFECTS)	-	100	10% discount to BIS
9.1- Table 5(Mass Resistivity- IS 3635)	-	100	10% discount to BIS
10(HYDROGEN EMBRITTLEMENT TEST- IS 191)	-	100	10% discount to BIS
4-Table 1(GRADES/DESIGNATIONS)	-	100	10% discount to BIS
5.1- Table 2(L)	-	100	10% discount to BIS
5.1- Table 2(L1)	-	100	10% discount to BIS
5.1- Table 2(h)	-	100	10% discount to BIS
5.1- Table 2(h1)	-	100	10% discount to BIS
5.1- Table 2(b)	-	100	10% discount to BIS
5.1- Table 2(b1)	-	100	10% discount to BIS
5.1- Table 2(R)	-	100	10% discount to BIS
5.1- Table 2(R1)	-	100	10% discount to BIS
5.1- Table 2(R2 )	-	100	10% discount to BIS
5.1- Table 2(α )	-	100	10% discount to BIS
5.1- Table 2( β )	-	100	10% discount to BIS
5.1- Table 2(γ)	-	100	10% discount to BIS
5.2(Billets)	-	100	10% discount to BIS
5.4-Table 3 (For Billets)(Mass)	-	100	10% discount to BIS
5.2-Table 3 (For Billets)(Diameter)	-	100	10% discount to BIS
5.2-Table 3 (For Billets)(Length)	-	100	10% discount to BIS
5.2-Table 3 (For Billets)(Deviation from straightness per 1000 mm length)	-	100	10% discount to BIS
5.4-Table 3 (Vertically continuously cast wire bars)(Mass)	-	100	10% discount to BIS
5.3-Table 3 (Vertically continuously cast wire bars)(Width)	-	100	10% discount to BIS
5.3-Table 3 (Vertically continuously cast wire bars)(thickness )	-	100	10% discount to BIS
5.3-Table 3 (Vertically continuously cast wire bars)(Other dimention)	-	100	10% discount to BIS
5.4-Table 3 (Vertically static cast wire bars)(Mass)	-	100	10% discount to BIS
5.3-Table 3 (Vertically static cast wire bars)(thickness )	-	100	10% discount to BIS
5.3-Table 3 (Vertically static cast wire bars)(Other dimention)	-	100	10% discount to BIS
5.4-Table 3 (Ingots)(Mass)	-	100	10% discount to BIS
5.4-Table 3 (Cast cakes)(Mass)	-	100	10% discount to BIS
5.3-Table 3 (Cast cakes)(Width)	-	100	10% discount to BIS
5.3-Table 3 (Cast cakes)(thickness )	-	100	10% discount to BIS
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	100	10% discount to BIS
7.1 - Table 4(Silver- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	100	10% discount to BIS
7.1 - Table 4(Phosphorus- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Arsenic- IS440)	-	100	10% discount to BIS
7.1 - Table 4(Antimony-IS440)	-	100	10% discount to BIS
7.1 - Table 4(Bismuth-IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Iron IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Lead IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Nickel IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Oxygen IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Selenium - IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Sulphur- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Tellurium- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Tin - IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Znic-IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Selenium + Telluuium- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Total Impurities- IS 440)	-	100	10% discount to BIS
8.1(FREEDOM FROM DEFECTS)	-	100	10% discount to BIS
8.2(FREEDOM FROM DEFECTS)	-	100	10% discount to BIS
9.1- Table 5(Mass Resistivity- IS 3635)	-	100	10% discount to BIS
10(HYDROGEN EMBRITTLEMENT TEST- IS 191)	-	100	10% discount to BIS
9.1 , 9.2 & 10(Resistivity & HYDROGEN EMBRITTLEMENT TEST)	-	100	10% discount to BIS
9.1 , 9.2 & 10(Resistivity & HYDROGEN EMBRITTLEMENT TEST)	-	100	10% discount to BIS
13(Marking)	-	100	10% discount to BIS
13(Marking)	-	100	10% discount to BIS
13(Marking)	-	100	10% discount to BIS
5.3-Table 3 (Cast cakes)(Deviation from straightness per 1000 mm length)	-	100	10% discount to BIS
5.3-Table 3 (Vertically static cast wire bars)(Width)	-	100	10% discount to BIS
5.3-Table 3 (Cast cakes)(Width)	-	100	10% discount to BIS
4-Table 1(GRADES/DESIGNATIONS)	-	100	10% discount to BIS
5.1- Table 2(L)	-	100	10% discount to BIS
5.1- Table 2(L1)	-	100	10% discount to BIS
5.1- Table 2(h)	-	100	10% discount to BIS
5.1- Table 2(h1)	-	100	10% discount to BIS
5.1- Table 2(b)	-	100	10% discount to BIS
5.1- Table 2(b1)	-	100	10% discount to BIS
5.1- Table 2(R)	-	100	10% discount to BIS
5.1- Table 2(R1)	-	100	10% discount to BIS
5.1- Table 2(R2 )	-	100	10% discount to BIS
5.1- Table 2(α )	-	100	10% discount to BIS
5.1- Table 2( β )	-	100	10% discount to BIS
5.1- Table 2(γ)	-	100	10% discount to BIS
5.2(Billets)	-	100	10% discount to BIS
5.4-Table 3 (For Billets)(Mass)	-	100	10% discount to BIS
5.2-Table 3 (For Billets)(Diameter)	-	100	10% discount to BIS
5.2-Table 3 (For Billets)(Length)	-	100	10% discount to BIS
5.2-Table 3 (For Billets)(Deviation from straightness per 1000 mm length)	-	100	10% discount to BIS
5.4-Table 3 (Vertically continuously cast wire bars)(Mass)	-	100	10% discount to BIS
5.3-Table 3 (Vertically continuously cast wire bars)(Width)	-	100	10% discount to BIS
5.3-Table 3 (Vertically continuously cast wire bars)(thickness )	-	100	10% discount to BIS
5.3-Table 3 (Vertically continuously cast wire bars)(Other dimention)	-	100	10% discount to BIS
5.4-Table 3 (Vertically static cast wire bars)(Mass)	-	100	10% discount to BIS
5.3-Table 3 (Vertically static cast wire bars)(Width)	-	100	10% discount to BIS
5.3-Table 3 (Vertically static cast wire bars)(thickness )	-	100	10% discount to BIS
5.3-Table 3 (Vertically static cast wire bars)(Other dimention)	-	100	10% discount to BIS
5.4-Table 3 (Ingots)(Mass)	-	100	10% discount to BIS
5.4-Table 3 (Cast cakes)(Mass)	-	100	10% discount to BIS
5.3-Table 3 (Cast cakes)(thickness )	-	100	10% discount to BIS
5.3-Table 3 (Cast cakes)(Deviation from straightness per 1000 mm length)	-	100	10% discount to BIS
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	100	10% discount to BIS
7.1 - Table 4(Silver- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	100	10% discount to BIS
7.1 - Table 4(Phosphorus- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Arsenic- IS440)	-	100	10% discount to BIS
7.1 - Table 4(Antimony-IS440)	-	100	10% discount to BIS
7.1 - Table 4(Bismuth-IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Iron IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Lead IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Nickel IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Oxygen IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Selenium - IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Sulphur- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Tellurium- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Tin - IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Znic-IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Selenium + Telluuium- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Total Impurities- IS 440)	-	100	10% discount to BIS
8.1(FREEDOM FROM DEFECTS)	-	100	10% discount to BIS
8.2(FREEDOM FROM DEFECTS)	-	100	10% discount to BIS
9.1- Table 5(Mass Resistivity- IS 3635)	-	100	10% discount to BIS
10(HYDROGEN EMBRITTLEMENT TEST- IS 191)	-	100	10% discount to BIS
4-Table 1(GRADES/DESIGNATIONS)	-	100	10% discount to BIS
5.1- Table 2(L)	-	100	10% discount to BIS
5.1- Table 2(L1)	-	100	10% discount to BIS
5.1- Table 2(h)	-	100	10% discount to BIS
5.1- Table 2(h1)	-	100	10% discount to BIS
5.1- Table 2(b)	-	100	10% discount to BIS
5.1- Table 2(b1)	-	100	10% discount to BIS
5.1- Table 2(R)	-	100	10% discount to BIS
5.1- Table 2(R1)	-	100	10% discount to BIS
5.1- Table 2(R2 )	-	100	10% discount to BIS
5.1- Table 2(α )	-	100	10% discount to BIS
5.1- Table 2( β )	-	100	10% discount to BIS
5.1- Table 2(γ)	-	100	10% discount to BIS
5.2(Billets)	-	100	10% discount to BIS
5.4-Table 3 (For Billets)(Mass)	-	100	10% discount to BIS
5.2-Table 3 (For Billets)(Diameter)	-	100	10% discount to BIS
5.2-Table 3 (For Billets)(Length)	-	100	10% discount to BIS
5.2-Table 3 (For Billets)(Deviation from straightness per 1000 mm length)	-	100	10% discount to BIS
5.4-Table 3 (Vertically continuously cast wire bars)(Mass)	-	100	10% discount to BIS
5.3-Table 3 (Vertically continuously cast wire bars)(Width)	-	100	10% discount to BIS
5.3-Table 3 (Vertically continuously cast wire bars)(thickness )	-	100	10% discount to BIS
5.3-Table 3 (Vertically continuously cast wire bars)(Other dimention)	-	100	10% discount to BIS
5.4-Table 3 (Vertically static cast wire bars)(Mass)	-	100	10% discount to BIS
5.3-Table 3 (Vertically static cast wire bars)(thickness )	-	100	10% discount to BIS
5.3-Table 3 (Vertically static cast wire bars)(Other dimention)	-	100	10% discount to BIS
5.4-Table 3 (Ingots)(Mass)	-	100	10% discount to BIS
5.4-Table 3 (Cast cakes)(Mass)	-	100	10% discount to BIS
5.3-Table 3 (Cast cakes)(Width)	-	100	10% discount to BIS
5.3-Table 3 (Cast cakes)(thickness )	-	100	10% discount to BIS
7.1 - Table 4(Copper + Silver(By difference)-IS440)	-	100	10% discount to BIS
7.1 - Table 4(Silver- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Copper (any Silver present to be counted as copper)-IS440)	-	100	10% discount to BIS
7.1 - Table 4(Phosphorus- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Arsenic- IS440)	-	100	10% discount to BIS
7.1 - Table 4(Antimony-IS440)	-	100	10% discount to BIS
7.1 - Table 4(Bismuth-IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Iron IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Lead IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Nickel IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Oxygen IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Selenium - IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Sulphur- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Tellurium- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Tin - IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Znic-IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Selenium + Telluuium- IS 440)	-	100	10% discount to BIS
7.1 - Table 4(Total Impurities- IS 440)	-	100	10% discount to BIS
8.1(FREEDOM FROM DEFECTS)	-	100	10% discount to BIS
8.2(FREEDOM FROM DEFECTS)	-	100	10% discount to BIS
9.1- Table 5(Mass Resistivity- IS 3635)	-	100	10% discount to BIS
10(HYDROGEN EMBRITTLEMENT TEST- IS 191)	-	100	10% discount to BIS
9.1 , 9.2 & 10(Resistivity & HYDROGEN EMBRITTLEMENT TEST)	-	100	10% discount to BIS
9.1 , 9.2 & 10(Resistivity & HYDROGEN EMBRITTLEMENT TEST)	-	100	10% discount to BIS
13(Marking)	-	100	10% discount to BIS
13(Marking)	-	100	10% discount to BIS
13(Marking)	-	100	10% discount to BIS
5.3-Table 3 (Cast cakes)(Deviation from straightness per 1000 mm length)	-	100	10% discount to BIS
5.3-Table 3 (Vertically static cast wire bars)(Width)	-	100	10% discount to BIS
5.3-Table 3 (Cast cakes)(Width)	-	100	10% discount to BIS

07 Sep, 2026

-
Included w.e.f. 20.11.2024 "All grades except Cu-DHP, Cu-DPA and Cu-ATP"

IS 17048 (2018)

Halogen free flame retardant (HFFR) cables for working voltages up to and including 1 100 Volts - Specification

180000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 a) (Conductor : Material )	-	2500	10% discount to BIS
4.1.1 b) (Material : Seperator tape )	-	2500	10% discount to BIS
4.1.1 d) , 11.1, 12.1, 13.1,14.1(Class of conductor )	-	2500	10% discount to BIS
4.1.1 e) (Shape of conductor )	-	2500	10% discount to BIS
4.1.1 f) (Nominal size of conductor )	-	2500	10% discount to BIS
4.2.1, 11.2, 12.2, 13.2, 14.2(Insulation : Material )	-	2500	10% discount to BIS
4.2.2, 11.2, 12.2, 13.2, 14.2(Insulation : Application )	-	2500	10% discount to BIS
4.2.3,11.2, 12.2, 13.2(Thickness of insulation - Avearge : IS 10810 ( Part 6 ))	-	2500	10% discount to BIS
4.2.3, 11.2, 12.2, 13.2, 14.2(Thickness of insulation - miniumum : IS 10810 ( Part 6 ))	-	2500	10% discount to BIS
4.2.4(Insulation : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	2500	10% discount to BIS
4.2.4(Insulation : Elongation ( Before ageing) -IS 10810 (Part 7))	-	2500	10% discount to BIS
4.2.4(Insulation : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	2500	10% discount to BIS
4.2.5(Insulation : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	2500	10% discount to BIS
4.2.4(Insulation : Elongation (after ageing) - IS 10810 (Part 7) )	-	2500	10% discount to BIS
4.2.5(Insulation : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	2500	10% discount to BIS
4.3(Fillers)	-	2500	10% discount to BIS
4.4(Binder Tape)	-	2500	10% discount to BIS
4.5.1,13.4, 14.4(Sheath : Compound )	-	2500	10% discount to BIS
4.5.2, 13.4, 14.4(Sheath : Application)	-	2500	10% discount to BIS
4.5.3,13.4, 14.4(Thickness of sheath - Average : IS 10810 (Part 6))	-	2500	10% discount to BIS
4.5.3,13.4, 14.4(Thickness of sheath - Minimum : IS 10810 (Part 6))	-	2500	10% discount to BIS
4.5.4, 13.4(Sheath : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	2500	10% discount to BIS
4.5.4,13.4(Sheath : Elongation ( Before ageing) -IS 10810 (Part 7))	-	2500	10% discount to BIS
4.5.4, 13.4, 14.4(Sheath : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	2500	10% discount to BIS
4.5.5, 13.4, 14.4(Sheath : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	2500	10% discount to BIS
4.5.4, 13.4, 14.4(Sheath : Elongation (after ageing) - IS 10810 (Part 7) )	-	2500	10% discount to BIS
4.5.5, 13.4,14.4(Sheath : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	2500	10% discount to BIS
4.5.5, 11.3, 12.3, 13.6, 14.6(Overall Dimensions)	-	2500	10% discount to BIS
4.5.5.1, 11.3, 12.3,13.5, 14.5(Ovality)	-	2500	10% discount to BIS
4.5.6, 13.4(Colour of Sheath)	-	2500	10% discount to BIS
5.1(High Voltage Test (at Room Temperature))	-	2500	10% discount to BIS
5.2(Spark Test (Routine Test))	-	2500	10% discount to BIS
5.3(Flammability Test- IS 10810 (Part 53).)	-	2500	10% discount to BIS
5.4(Oxygen Index Test- IS 10810 (Part 58))	-	2500	10% discount to BIS
5.5(Temperature Index-IS 10810 (Part 64).)	-	2500	10% discount to BIS
5.6(Smoke Density-IS 10810 (Part 63).)	-	2500	10% discount to BIS
5.7(Assessment of Halogen- Table 1 of Annex D)	-	2500	10% discount to BIS
5.1(Persulphate Test- IS 10810 (Part 4).)	-	2500	10% discount to BIS
5.11(Flame Retardant Test- IS 10810 (Part 61),)	-	2500	10% discount to BIS
5.12(Hot Set Test- IS 10810 (Part 30).)	-	2500	10% discount to BIS
5.12(Permanent Set - IS 10810 (Part 30).)	-	2500	10% discount to BIS
5.13(Water Immersion Test (Effect of Water on Sheath) : Tensile strength -IS 10810 (Part 7).)	-	2500	10% discount to BIS
5.13(Water Immersion Test (Effect of Water on Sheath) : Elogation -IS 10810 (Part 7).)	-	2500	10% discount to BIS
5.15(Cold Bend Test-IS 10810 (Part 20).)	-	2500	10% discount to BIS
5.16(Cold Impact Test- IS 10810 (Part 21).)	-	2500	10% discount to BIS
6.1, Table 1(CORE IDENTIFICATION)	-	2500	10% discount to BIS
6.2(Core Identification by Numbers)	-	2500	10% discount to BIS
6.2.1(Preferred Arrangement of Marking)	-	2500	10% discount to BIS
6.2.2(Durability)	-	2500	10% discount to BIS
7.0(CABLE CODE)	-	2500	10% discount to BIS
9.0( IDENTIFICATION)	-	2500	10% discount to BIS
10.1(Packing )	-	2500	10% discount to BIS
10.2(marking)	-	2500	10% discount to BIS
10.2.1(Standards marking)	-	2500	10% discount to BIS
13.3, 14.3(assembly of cores )	-	2500	10% discount to BIS
6.1(General Requirements)	-	2500	10% discount to BIS
6.1.1(Colour Combination Green Yellow)	-	2500	10% discount to BIS
12.1(Conductor)	-	2500	10% discount to BIS
12.2, Table 4(insulation)	-	2500	10% discount to BIS
4.3.1 (b)(pH test (Fillers))	-	2500	10% discount to BIS
4.3.1 (a)(HCl test (Fillers))	-	2500	10% discount to BIS
5.7 (a)(HCl test (Assessment of halogen test))	-	2500	10% discount to BIS
5.7 (b)(pH test (Assessment of halogen test))	-	2500	10% discount to BIS
Table 2 ,( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )(Insulation Resistance)	-	2500	10% discount to BIS
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Conductor Resistance)	-	2500	10% discount to BIS
Table 2 , Clause .5.13(Water immersion test (Effect of water on sheath) - TS Variation of Sheath)	-	2500	10% discount to BIS
Table 2 , Clause 5.13(Water immersion test (Effect of water on sheath) - Elongation Variation of Sheath)	-	2500	10% discount to BIS
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Hot Deformation)	-	2500	10% discount to BIS
Table 2, III.a.ii(Annealing test (for Cu, before stranding))	-	2500	10% discount to BIS
Table 2, II.a, b(Wrapping test before stranding (for Al))	-	2500	10% discount to BIS
Table 4(Copper Purity test)	-	2500	10% discount to BIS
4.3.1 (e)(Fluorine content test (Fillers))	-	2500	10% discount to BIS
4.3.1 (d)(Presence of fluorine test (Fillers))	-	2500	10% discount to BIS
4.3.1 (c)(Conductivity test (Fillers))	-	2500	10% discount to BIS
5.7 (c)(Conductivity test (Assessment of halogen test))	-	2500	10% discount to BIS
5.7 (d)(Presence of fluorine test (Assessment of halogen test))	-	2500	10% discount to BIS
5.7 (e)(Fluorine content test (Assessment of halogen test))	-	2500	10% discount to BIS
5.14(Ozone Resistance Test -IS 10810 (Part 13 ))	-	2500	10% discount to BIS

07 Sep, 2026

-
Included.w.e.f.24.12.2024

IS 9857 (1990)

Welding cables - Specification (First Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Conductor : Material )	-	1000	10% discount to BIS
5(SEPARATOR)	-	1000	10% discount to BIS
7(CONDUCTOR : CONSTRUCTION )	-	1000	10% discount to BIS
6(COVERING)	-	1000	10% discount to BIS
8(S E P A R A T O R)	-	1000	10% discount to BIS
9.1(C O V E R I N G : Application )	-	1000	10% discount to BIS
9.2(T h i c k n e s s o f C o v e r i n g)	-	1000	10% discount to BIS
9.3(T o l e r a n c e on Thickness o f C o v e r i n g)	-	1000	10% discount to BIS
9.4(A p p l i c a t i o n of C o v e r i n g)	-	1000	10% discount to BIS
9.5(Colour of C o v e r i n g)	-	1000	10% discount to BIS
10.1 a) 1)(Annealing test - IS 10810: Part 1)	-	1000	10% discount to BIS
10.1 a) 2)(Conductor resistance tes - IS 10810 : Part 5)	-	1000	10% discount to BIS
10.1 c) 1)(Physical tests for covering : Tensile strength )	-	1000	10% discount to BIS
10.1 c) 1)(Physical tests for covering : Elongation at break )	-	1000	10% discount to BIS
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength variation)	-	1000	10% discount to BIS
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation at break )	-	1000	10% discount to BIS
10.1 c) 2)(Physical tests for covering - Ageing in Air oven : Tensile strength )	-	1000	10% discount to BIS
10.1 c) 2)(Physical tests for covering -Ageing in Air oven : Elongation variation at break )	-	1000	10% discount to BIS
10.1 c) 3)(Physical tests for covering - Ageing in Air Bomb : Tensile strength variation )	-	1000	10% discount to BIS
10.1 c) 3)(Physical tests for covering -Ageing in Air Bomb : Elongation variation at break )	-	1000	10% discount to BIS
10.1 c) 4)(Physical tests for covering - Oil Resistance : Tensile strength variation )	-	1000	10% discount to BIS
10.1 c) 4)(Physical tests for covering - Oil Resistance : Elongation variation at break )	-	1000	10% discount to BIS
10.1 c) 5)(Hot set test )	-	1000	10% discount to BIS
10.1 c) 5)(Permanent set )	-	1000	10% discount to BIS
11.1(High Voltage Test ( Water Immersion Test ))	-	1000	10% discount to BIS
11.2(Spark Test)	-	1000	10% discount to BIS
11.3(Static Flexibility Test)	-	1000	10% discount to BIS
11.4(Flammability Test)	-	1000	10% discount to BIS
12.1(Manufacturer's Identification)	-	1000	10% discount to BIS
12.2(Cable Identification)	-	1000	10% discount to BIS
12.3(Cable Code)	-	1000	10% discount to BIS
13.1(Packing )	-	1000	10% discount to BIS
13.2(Marking)	-	1000	10% discount to BIS
14(CABLE RATINGS)	-	1000	10% discount to BIS
15(VOLTAGE DROP)	-	1000	10% discount to BIS
Table 4(Copper purity test)	-	1000	10% discount to BIS
Table 2(Oil resistance - Elongation)	-	1000	10% discount to BIS
Table 2(Oil resistance - Tensile strength )	-	1000	10% discount to BIS
Table 2(Ageing in air bomb - Elongation)	-	1000	10% discount to BIS
Table 2(Ageing in air bomb - Tensile strength )	-	1000	10% discount to BIS
Table 1 (Thickness of covering)	-	1000	10% discount to BIS
15.1 (d)(Heat Shock Test)	-	1000	10% discount to BIS
15.1 (d)(Hot Deformation Test)	-	1000	10% discount to BIS
15.1 (d)(Loss Of Mass Test)	-	1000	10% discount to BIS
10.1(b), Table 1(Thickness of covering)	-	1000	10% discount to BIS

07 Sep, 2026

-
Included w.e.f. 11-09-2024.

IS 9968 : Part 1 (1988)

Specification for elastomer insulatedcables: Part 1 for working voltages up to and including 1100 volts (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1( Copper Cooduetor)	-	500	10% discount to BIS
3.2(Aluminium conductor)	-	500	10% discount to BIS
4.1(INSULATION : lnsulation for General Service)	-	500	10% discount to BIS
4.2(INSULATION : Heat Resisting insulation)	-	500	10% discount to BIS
4.3(INSULATION : Silicone Rubber Insulation)	-	500	10% discount to BIS
5.1(TAPE : Proofed Tape)	-	500	10% discount to BIS
5.2(TAPE : 2 Polyethyl_ Terephthalate ( PETP ) Tape or Plastic: Tape or Any Other SlIIitable Tape )	-	500	10% discount to BIS
5.3(TAPE : Giass Tape)	-	500	10% discount to BIS
6.1(FILLERS : )	-	500	10% discount to BIS
7.1(BRAID : Textile Braid)	-	500	10% discount to BIS
7.2(BRAID : Glass Braid )	-	500	10% discount to BIS
8.1(SHEATH : General Service Insulated Cables and Flexible Cords)	-	500	10% discount to BIS
8.2(SHEATH :Heat Resisting Insulated Cables)	-	500	10% discount to BIS
9.1(PresenRtive Compound)	-	500	10% discount to BIS
9.2(Varnish)	-	500	10% discount to BIS
10( Conductor )	-	500	10% discount to BIS
11(Separator tape)	-	500	10% discount to BIS
12.2(Insulation : Thickness of Insufatien)	-	500	10% discount to BIS
12.4(Insulation : Allplication of Insulation)	-	500	10% discount to BIS
13(CORE IDENTiFICATlON)	-	500	10% discount to BIS
14(Tape)	-	500	10% discount to BIS
15(BRAIDING)	-	500	10% discount to BIS
16(COMPOUNDING AND VARNISHING)	-	500	10% discount to BIS
17(LAYING UP OF CORES)	-	500	10% discount to BIS
18( Binder tape)	-	500	10% discount to BIS
19.2(Sheath : Thickness of Sheath)	-	500	10% discount to BIS
19.4( Sheath :Colour)	-	500	10% discount to BIS
20( Overall diameter)	-	500	10% discount to BIS
21. (a)(Persulphate tests (for copper))	-	500	10% discount to BIS
21. (b)(Annealing Test (for coper))	-	500	10% discount to BIS
21. (c)( Tensile Test (for aluminium))	-	500	10% discount to BIS
21. (d)( Wrapping Test (for aluminium))	-	500	10% discount to BIS
21. (e)(Conductor Resistance )	-	500	10% discount to BIS
21.1( Tensile strength )	-	500	10% discount to BIS
22.1( Elongation)	-	500	10% discount to BIS
21.1(type test : Ageing In air oven)	-	500	10% discount to BIS
21.1(type test : Ageing in air bomb)	-	500	10% discount to BIS
21.1(type test : Ageing In oxygen bomb)	-	500	10% discount to BIS
21.1(type test : Hot set elongation)	-	1000	10% discount to BIS
21.1(type test : Tear resistance )	-	500	10% discount to BIS
22.2(type test :Insulauon resistance High voltage (water immersron ) test)	-	500	10% discount to BIS
22.2(type test : Flammability test ( applicable to cables finished With SE 3 and SE 4 sheaths only) )	-	500	10% discount to BIS
21(Water absorption test)	-	500	10% discount to BIS
23(identification)	-	500	10% discount to BIS
Cl No. 4.1(Ageing in oxygen bomb - Elongation)	-	500	10% discount to BIS
Cl No. 4.1(Ageing in oxygen bomb - Tensile strength )	-	500	10% discount to BIS
Cl No. 4.1(Ageing in air bomb - Elongation)	-	500	10% discount to BIS
Cl No. 4.1(Ageing in air bomb - Tensile strength )	-	500	10% discount to BIS
Cl No. 4.1(Ageing in air oven - Elongation)	-	500	10% discount to BIS
Cl No. 4.1(Ageing in air oven - Tensile strength )	-	500	10% discount to BIS
Cl No. 22.2(High Voltage Test (Water Immersion))	-	500	10% discount to BIS
Cl No. 4.1(Insulation resistance)	-	500	10% discount to BIS
Cl No. 22.4, Appendix B (Flexing test for cords for use with electric iron )	-	500	10% discount to BIS
Cl No. 22.2.2/22.2.3(High Voltage Test / Spark test)	-	500	10% discount to BIS
Cl No. 23.1, 23.2(Identification)	-	500	10% discount to BIS
21.1((f) Oil resistance)	-	500	10% discount to BIS
3.1( Copper Cooduetor)	-	500	10% discount to BIS
3.2(Aluminium conductor)	-	500	10% discount to BIS
4.1(INSULATION : lnsulation for General Service)	-	500	10% discount to BIS
4.2(INSULATION : Heat Resisting insulation)	-	500	10% discount to BIS
4.3(INSULATION : Silicone Rubber Insulation)	-	500	10% discount to BIS
5.1(TAPE : Proofed Tape)	-	500	10% discount to BIS
5.2(TAPE : 2 Polyethyl_ Terephthalate ( PETP ) Tape or Plastic: Tape or Any Other SlIIitable Tape )	-	500	10% discount to BIS
5.3(TAPE : Giass Tape)	-	500	10% discount to BIS
6.1(FILLERS : )	-	500	10% discount to BIS
7.1(BRAID : Textile Braid)	-	500	10% discount to BIS
7.2(BRAID : Glass Braid )	-	500	10% discount to BIS
8.1(SHEATH : General Service Insulated Cables and Flexible Cords)	-	500	10% discount to BIS
8.2(SHEATH :Heat Resisting Insulated Cables)	-	500	10% discount to BIS
9.1(PresenRtive Compound)	-	500	10% discount to BIS
9.2(Varnish)	-	500	10% discount to BIS
10( Conductor )	-	500	10% discount to BIS
11(Separator tape)	-	500	10% discount to BIS
12.2(Insulation : Thickness of Insufatien)	-	500	10% discount to BIS
12.4(Insulation : Allplication of Insulation)	-	500	10% discount to BIS
13(CORE IDENTiFICATlON)	-	500	10% discount to BIS
14(Tape)	-	500	10% discount to BIS
15(BRAIDING)	-	500	10% discount to BIS
16(COMPOUNDING AND VARNISHING)	-	500	10% discount to BIS
17(LAYING UP OF CORES)	-	500	10% discount to BIS
18( Binder tape)	-	500	-
19.2(Sheath : Thickness of Sheath)	-	500	-
19.4( Sheath :Colour)	-	500	-
20( Overall diameter)	-	500	-
21. (a)(Persulphate tests (for copper))	-	500	-
21. (b)(Annealing Test (for coper))	-	500	-
21. (c)( Tensile Test (for aluminium))	-	500	-
21. (d)( Wrapping Test (for aluminium))	-	500	-
21. (e)(Conductor Resistance )	-	500	-
21.1( Tensile strength )	-	500	-
22.1( Elongation)	-	500	-
21.1(type test : Ageing In air oven)	-	500	-
21.1(type test : Ageing in air bomb)	-	500	-
21.1(type test : Ageing In oxygen bomb)	-	500	-
21.1(type test : Hot set elongation)	-	500	-
21.1(type test : Tear resistance )	-	500	-
22.2(type test :Insulauon resistance High voltage (water immersron ) test)	-	500	10% discount to BIS
22.2(type test : Flammability test ( applicable to cables finished With SE 3 and SE 4 sheaths only) )	-	500	10% discount to BIS
21(Water absorption test)	-	500	10% discount to BIS
23(identification)	-	500	10% discount to BIS
Cl No. 4.1(Ageing in oxygen bomb - Elongation)	-	500	10% discount to BIS
Cl No. 4.1(Ageing in oxygen bomb - Tensile strength )	-	500	10% discount to BIS
Cl No. 4.1(Ageing in air bomb - Elongation)	-	500	10% discount to BIS
Cl No. 4.1(Ageing in air bomb - Tensile strength )	-	500	10% discount to BIS
Cl No. 4.1(Ageing in air oven - Elongation)	-	500	10% discount to BIS
Cl No. 4.1(Ageing in air oven - Tensile strength )	-	500	10% discount to BIS
Cl No. 22.2(High Voltage Test (Water Immersion))	-	500	10% discount to BIS
Cl No. 4.1(Insulation resistance)	-	500	10% discount to BIS
Cl No. 22.4, Appendix B (Flexing test for cords for use with electric iron )	-	500	10% discount to BIS
Cl No. 22.2.2/22.2.3(High Voltage Test / Spark test)	-	500	10% discount to BIS
Cl No. 23.1, 23.2(Identification)	-	500	10% discount to BIS
21.1((f) Oil resistance)	-	500	10% discount to BIS
3.1( Copper Cooduetor)	-	500	10% discount to BIS
3.2(Aluminium conductor)	-	500	10% discount to BIS
4.1(INSULATION : lnsulation for General Service)	-	500	10% discount to BIS
4.2(INSULATION : Heat Resisting insulation)	-	500	10% discount to BIS
4.3(INSULATION : Silicone Rubber Insulation)	-	500	10% discount to BIS
5.1(TAPE : Proofed Tape)	-	500	10% discount to BIS
5.2(TAPE : 2 Polyethyl_ Terephthalate ( PETP ) Tape or Plastic: Tape or Any Other SlIIitable Tape )	-	500	10% discount to BIS
5.3(TAPE : Giass Tape)	-	500	10% discount to BIS
6.1(FILLERS : )	-	500	10% discount to BIS
7.1(BRAID : Textile Braid)	-	500	10% discount to BIS
7.2(BRAID : Glass Braid )	-	500	10% discount to BIS
8.1(SHEATH : General Service Insulated Cables and Flexible Cords)	-	500	10% discount to BIS
8.2(SHEATH :Heat Resisting Insulated Cables)	-	500	10% discount to BIS
9.1(PresenRtive Compound)	-	500	10% discount to BIS
9.2(Varnish)	-	500	10% discount to BIS
10( Conductor )	-	500	10% discount to BIS
11(Separator tape)	-	500	10% discount to BIS
12.2(Insulation : Thickness of Insufatien)	-	500	10% discount to BIS
12.4(Insulation : Allplication of Insulation)	-	500	10% discount to BIS
13(CORE IDENTiFICATlON)	-	500	10% discount to BIS
14(Tape)	-	500	10% discount to BIS
15(BRAIDING)	-	500	10% discount to BIS
16(COMPOUNDING AND VARNISHING)	-	500	10% discount to BIS
17(LAYING UP OF CORES)	-	500	10% discount to BIS
18( Binder tape)	-	500	10% discount to BIS
19.2(Sheath : Thickness of Sheath)	-	500	10% discount to BIS
19.4( Sheath :Colour)	-	500	10% discount to BIS
20( Overall diameter)	-	500	10% discount to BIS
21. (a)(Persulphate tests (for copper))	-	500	10% discount to BIS
21. (b)(Annealing Test (for coper))	-	500	10% discount to BIS
21. (c)( Tensile Test (for aluminium))	-	500	10% discount to BIS
21. (d)( Wrapping Test (for aluminium))	-	500	10% discount to BIS
21. (e)(Conductor Resistance )	-	500	10% discount to BIS
21.1( Tensile strength )	-	500	10% discount to BIS
22.1( Elongation)	-	500	10% discount to BIS
21.1(type test : Ageing In air oven)	-	500	10% discount to BIS
21.1(type test : Ageing in air bomb)	-	500	10% discount to BIS
21.1(type test : Ageing In oxygen bomb)	-	500	10% discount to BIS
21.1(type test : Hot set elongation)	-	500	10% discount to BIS
21.1(type test : Tear resistance )	-	500	10% discount to BIS
22.2(type test :Insulauon resistance High voltage (water immersron ) test)	-	500	10% discount to BIS
22.2(type test : Flammability test ( applicable to cables finished With SE 3 and SE 4 sheaths only) )	-	500	10% discount to BIS
21(Water absorption test)	-	500	10% discount to BIS
23(identification)	-	500	10% discount to BIS
Cl No. 4.1(Ageing in oxygen bomb - Elongation)	-	500	10% discount to BIS
Cl No. 4.1(Ageing in oxygen bomb - Tensile strength )	-	500	10% discount to BIS
Cl No. 4.1(Ageing in air bomb - Elongation)	-	500	10% discount to BIS
Cl No. 4.1(Ageing in air bomb - Tensile strength )	-	500	10% discount to BIS
Cl No. 4.1(Ageing in air oven - Elongation)	-	500	10% discount to BIS
Cl No. 4.1(Ageing in air oven - Tensile strength )	-	500	10% discount to BIS
Cl No. 22.2(High Voltage Test (Water Immersion))	-	500	10% discount to BIS
Cl No. 4.1(Insulation resistance)	-	500	10% discount to BIS
Cl No. 22.4, Appendix B (Flexing test for cords for use with electric iron )	-	500	10% discount to BIS
Cl No. 22.2.2/22.2.3(High Voltage Test / Spark test)	-	500	10% discount to BIS
Cl No. 23.1, 23.2(Identification)	-	500	10% discount to BIS
21.1((f) Oil resistance)	-	500	10% discount to BIS
3.1( Copper Cooduetor)	-	500	10% discount to BIS
3.2(Aluminium conductor)	-	500	10% discount to BIS
4.1(INSULATION : lnsulation for General Service)	-	500	10% discount to BIS
4.2(INSULATION : Heat Resisting insulation)	-	500	10% discount to BIS
4.3(INSULATION : Silicone Rubber Insulation)	-	500	10% discount to BIS
5.1(TAPE : Proofed Tape)	-	500	10% discount to BIS
5.2(TAPE : 2 Polyethyl_ Terephthalate ( PETP ) Tape or Plastic: Tape or Any Other SlIIitable Tape )	-	500	10% discount to BIS
5.3(TAPE : Giass Tape)	-	500	10% discount to BIS
6.1(FILLERS : )	-	500	10% discount to BIS
7.1(BRAID : Textile Braid)	-	500	10% discount to BIS
7.2(BRAID : Glass Braid )	-	500	10% discount to BIS
8.1(SHEATH : General Service Insulated Cables and Flexible Cords)	-	500	10% discount to BIS
8.2(SHEATH :Heat Resisting Insulated Cables)	-	500	10% discount to BIS
9.1(PresenRtive Compound)	-	500	10% discount to BIS
9.2(Varnish)	-	500	10% discount to BIS
10( Conductor )	-	500	10% discount to BIS
11(Separator tape)	-	500	10% discount to BIS
12.2(Insulation : Thickness of Insufatien)	-	500	10% discount to BIS
12.4(Insulation : Allplication of Insulation)	-	500	10% discount to BIS
13(CORE IDENTiFICATlON)	-	500	10% discount to BIS
14(Tape)	-	500	10% discount to BIS
15(BRAIDING)	-	500	10% discount to BIS
16(COMPOUNDING AND VARNISHING)	-	500	10% discount to BIS
17(LAYING UP OF CORES)	-	500	10% discount to BIS
18( Binder tape)	-	500	10% discount to BIS
19.2(Sheath : Thickness of Sheath)	-	500	10% discount to BIS
19.4( Sheath :Colour)	-	500	10% discount to BIS
20( Overall diameter)	-	500	10% discount to BIS
21. (a)(Persulphate tests (for copper))	-	500	10% discount to BIS
21. (b)(Annealing Test (for coper))	-	500	10% discount to BIS
21. (c)( Tensile Test (for aluminium))	-	500	10% discount to BIS
21. (d)( Wrapping Test (for aluminium))	-	500	10% discount to BIS
21. (e)(Conductor Resistance )	-	500	10% discount to BIS
21.1( Tensile strength )	-	500	10% discount to BIS
22.1( Elongation)	-	500	10% discount to BIS
21.1(type test : Ageing In air oven)	-	500	10% discount to BIS
21.1(type test : Ageing in air bomb)	-	500	10% discount to BIS
21.1(type test : Ageing In oxygen bomb)	-	500	10% discount to BIS
21.1(type test : Hot set elongation)	-	500	10% discount to BIS
21.1(type test : Tear resistance )	-	500	10% discount to BIS
22.2(type test :Insulauon resistance High voltage (water immersron ) test)	-	500	10% discount to BIS
22.2(type test : Flammability test ( applicable to cables finished With SE 3 and SE 4 sheaths only) )	-	500	10% discount to BIS
21(Water absorption test)	-	500	10% discount to BIS
23(identification)	-	500	10% discount to BIS
Cl No. 4.1(Ageing in oxygen bomb - Elongation)	-	500	10% discount to BIS
Cl No. 4.1(Ageing in oxygen bomb - Tensile strength )	-	500	10% discount to BIS
Cl No. 4.1(Ageing in air bomb - Elongation)	-	500	10% discount to BIS
Cl No. 4.1(Ageing in air bomb - Tensile strength )	-	500	10% discount to BIS
Cl No. 4.1(Ageing in air oven - Elongation)	-	500	10% discount to BIS
Cl No. 4.1(Ageing in air oven - Tensile strength )	-	500	10% discount to BIS
Cl No. 22.2(High Voltage Test (Water Immersion))	-	500	10% discount to BIS
Cl No. 4.1(Insulation resistance)	-	500	10% discount to BIS
Cl No. 22.4, Appendix B (Flexing test for cords for use with electric iron )	-	500	10% discount to BIS
Cl No. 22.2.2/22.2.3(High Voltage Test / Spark test)	-	500	10% discount to BIS
Cl No. 23.1, 23.2(Identification)	-	500	10% discount to BIS
21.1((f) Oil resistance)	-	500	10% discount to BIS

07 Sep, 2026

-
Included w.e.f. 11-09-2024.

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	500	10% discount to BIS
7.1 Table-1(Dimensional measurement of wires)	-	500	10% discount to BIS
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	500	10% discount to BIS
8.1(Joints in wires-Conductors Containing Seven Wires)	-	500	10% discount to BIS
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	500	10% discount to BIS
9.1(Stranding)	-	500	10% discount to BIS
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	10% discount to BIS
9.3(Direction of Lay)	-	500	10% discount to BIS
9.4(Multiple layers of wires)	-	500	10% discount to BIS
11(Packing and Marking)	-	500	10% discount to BIS
12.2 Table 1(Breaking Load Test- Before Stranding)	-	500	10% discount to BIS
12.2 Table 1(Breaking Load Test- After Stranding)	-	500	10% discount to BIS
12.3 Table 1(Elongation Test- Before Stranding)	-	500	10% discount to BIS
12.3 Table 1(Elongation Test- After Stranding)	-	500	10% discount to BIS
12.4 Table 1(Resistance of Aluminium wire)	-	500	10% discount to BIS
9.2(Lay Ratio 24 wire layer)	-	500	10% discount to BIS
9.2(Lay Ratio 18 wire layer)	-	500	10% discount to BIS
9.2(Lay Ratio 12 wire layer)	-	500	10% discount to BIS
9.2(Lay Ratio 3/6 wire layer)	-	500	10% discount to BIS
7.2.1(Sizes)	-	500	10% discount to BIS
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	500	10% discount to BIS
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	500	10% discount to BIS
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	500	10% discount to BIS
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	500	10% discount to BIS
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	500	10% discount to BIS
6.1(Freedom from Defects)	-	500	10% discount to BIS
7.1 Table-1(Dimensional measurement of wires)	-	500	10% discount to BIS
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	500	10% discount to BIS
8.1(Joints in wires-Conductors Containing Seven Wires)	-	500	10% discount to BIS
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	500	10% discount to BIS
9.1(Stranding)	-	500	10% discount to BIS
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	10% discount to BIS
9.3(Direction of Lay)	-	500	10% discount to BIS
9.4(Multiple layers of wires)	-	500	10% discount to BIS
11(Packing and Marking)	-	500	10% discount to BIS
12.2 Table 1(Breaking Load Test- Before Stranding)	-	500	10% discount to BIS
12.2 Table 1(Breaking Load Test- After Stranding)	-	500	10% discount to BIS
12.3 Table 1(Elongation Test- Before Stranding)	-	500	10% discount to BIS
12.3 Table 1(Elongation Test- After Stranding)	-	500	10% discount to BIS
12.4 Table 1(Resistance of Aluminium wire)	-	500	10% discount to BIS
9.2(Lay Ratio 24 wire layer)	-	500	10% discount to BIS
9.2(Lay Ratio 18 wire layer)	-	500	10% discount to BIS
9.2(Lay Ratio 12 wire layer)	-	500	10% discount to BIS
9.2(Lay Ratio 3/6 wire layer)	-	500	10% discount to BIS
7.2.1(Sizes)	-	500	10% discount to BIS
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	500	10% discount to BIS
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	500	10% discount to BIS
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	500	10% discount to BIS
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	500	10% discount to BIS
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	500	10% discount to BIS
6.1(Freedom from Defects)	-	500	-
7.1 Table-1(Dimensional measurement of wires)	-	500	10% discount to BIS
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	500	10% discount to BIS
8.1(Joints in wires-Conductors Containing Seven Wires)	-	500	10% discount to BIS
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	500	10% discount to BIS
9.1(Stranding)	-	500	10% discount to BIS
9.2 Table 3(Lay Ratio of stranded conductors)	-	500	10% discount to BIS
9.3(Direction of Lay)	-	500	10% discount to BIS
9.4(Multiple layers of wires)	-	500	10% discount to BIS
11(Packing and Marking)	-	500	10% discount to BIS
12.2 Table 1(Breaking Load Test- Before Stranding)	-	500	10% discount to BIS
12.2 Table 1(Breaking Load Test- After Stranding)	-	500	10% discount to BIS
12.3 Table 1(Elongation Test- Before Stranding)	-	500	10% discount to BIS
12.3 Table 1(Elongation Test- After Stranding)	-	500	10% discount to BIS
12.4 Table 1(Resistance of Aluminium wire)	-	500	10% discount to BIS
9.2(Lay Ratio 24 wire layer)	-	500	10% discount to BIS
9.2(Lay Ratio 18 wire layer)	-	500	10% discount to BIS
9.2(Lay Ratio 12 wire layer)	-	500	10% discount to BIS
9.2(Lay Ratio 3/6 wire layer)	-	500	10% discount to BIS
7.2.1(Sizes)	-	500	10% discount to BIS
Cl-7.2 (7.2.1, 7.2.2), Table-2(Stranding and Wire Dia)	-	500	10% discount to BIS
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Overall Dia)	-	500	10% discount to BIS
Cl. 7.2 (7.2.1, 7.2.2), Table 2(Approx Mass)	-	500	10% discount to BIS
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Calculated Maximum Resistance at 20°C)	-	500	10% discount to BIS
Cl- 7.2 (7.2.1, 7.2.2), Table-2(Approx Calculated Breaking Load)	-	500	10% discount to BIS

07 Sep, 2026

-
Included w.e.f. 11-09-2024.

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	10% discount to BIS
12.3, Table-1(Breaking load before stranding)	-	500	10% discount to BIS
12.3, Table-1(Breaking load after stranding)	-	500	10% discount to BIS
12.4(Wrapping test)	-	500	10% discount to BIS
12.5, Table 1(Resistance test)	-	500	10% discount to BIS
12.6, Table 3(Measurement of lay ratio)	-	500	10% discount to BIS
9.3(Stranding)	-	500	10% discount to BIS
6(Freedom from defects)	-	500	10% discount to BIS
7.2.1(Sizes)	-	500	10% discount to BIS
8, 8.1, 8.2(Joint in wires, except during stranding)	-	500	10% discount to BIS
9.2(Lay ratio)	-	500	10% discount to BIS
9.4(Multiple layer of wires)	-	500	10% discount to BIS
4.1(Resistivity)	-	500	10% discount to BIS
4.2(Density)	-	500	10% discount to BIS
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	500	10% discount to BIS
4.4(Coefficient of Linear Expansion)	-	500	10% discount to BIS
5(Material)	-	500	10% discount to BIS
7.1.1(Nominal Sizes)	-	500	10% discount to BIS
7.2.2(Resistance)	-	500	10% discount to BIS
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	500	10% discount to BIS
12.3, Table-1(Breaking load before stranding)	-	500	10% discount to BIS
12.3, Table-1(Breaking load after stranding)	-	500	10% discount to BIS
12.4(Wrapping test)	-	500	10% discount to BIS
12.5, Table 1(Resistance test)	-	500	10% discount to BIS
12.6, Table 3(Measurement of lay ratio)	-	500	10% discount to BIS
9.3(Stranding)	-	500	10% discount to BIS
6(Freedom from defects)	-	500	10% discount to BIS
7.2.1(Sizes)	-	500	10% discount to BIS
8, 8.1, 8.2(Joint in wires, except during stranding)	-	500	10% discount to BIS
9.2(Lay ratio)	-	500	10% discount to BIS
9.4(Multiple layer of wires)	-	500	10% discount to BIS
4.1(Resistivity)	-	500	10% discount to BIS
4.2(Density)	-	500	10% discount to BIS
4.3(Constant-Mass Temperature Coefficient of Resistance)	-	500	10% discount to BIS
4.4(Coefficient of Linear Expansion)	-	500	10% discount to BIS
5(Material)	-	500	10% discount to BIS
7.1.1(Nominal Sizes)	-	500	10% discount to BIS
7.2.2(Resistance)	-	500	10% discount to BIS

07 Sep, 2026

-
Included w.e.f. 11-09-2024.

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	1000	10% discount to BIS
4.2(Messenger (Neutral Conductor or Otherwise))	-	1000	10% discount to BIS
5.1(Insulation)	-	1000	10% discount to BIS
6.1(Flexibility class)	-	1000	10% discount to BIS
6.2(Compactness)	-	1000	10% discount to BIS
6.2(Surface)	-	1000	10% discount to BIS
6.2(No of strands)	-	1000	10% discount to BIS
6.3(Protective barrier)	-	1000	10% discount to BIS
6.4(size of street lighting conductor)	-	1000	10% discount to BIS
6.5(Size of messenger conductor )	-	1000	-
6.6(Joints in messenger conductor )	-	1000	10% discount to BIS
6.6(Direction of outer layer)	-	1000	10% discount to BIS
7.1(Insulation)	-	1000	10% discount to BIS
7.2( Thickness of insulation)	-	1000	10% discount to BIS
7.3(Tolerance on thickness of insulation )	-	1000	10% discount to BIS
7.4(Aplication of the insulation )	-	1000	10% discount to BIS
7.5(Colour of the insulation )	-	1000	10% discount to BIS
8.1(Core identification)	-	1000	10% discount to BIS
8.2(Core identification)	-	1000	10% discount to BIS
8.3(Identification by other means)	-	1000	10% discount to BIS
9.1(Assembly (Laying up))	-	1000	10% discount to BIS
9.2(Assembly (Laying up))	-	1000	10% discount to BIS
9.3(Direction of lay)	-	1000	10% discount to BIS
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	1000	10% discount to BIS
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	1000	10% discount to BIS
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	1000	10% discount to BIS
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	1000	10% discount to BIS
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	1000	10% discount to BIS
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	1000	10% discount to BIS
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	1000	10% discount to BIS
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	1000	10% discount to BIS
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	1000	10% discount to BIS
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	1000	10% discount to BIS
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	1000	10% discount to BIS
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	1000	10% discount to BIS
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	1000	10% discount to BIS
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	1000	10% discount to BIS
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	1000	10% discount to BIS
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	1000	10% discount to BIS
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	1000	10% discount to BIS
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	1000	10% discount to BIS
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	1000	10% discount to BIS
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	1000	10% discount to BIS
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	1000	10% discount to BIS
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	1000	10% discount to BIS
10.1 g)(High voltage test - IS10810:Part 45)	-	1000	10% discount to BIS
11.4(Bending Test on the Completed Cable ( Optional) )	-	1000	10% discount to BIS
11.4(Bending Test on the Completed Cable ( Optional))	-	1000	10% discount to BIS
10.1 d) iii)(Carbon Black Content)	-	1000	10% discount to BIS

07 Sep, 2026

-
Included w.e.f. 11-09-2024.

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	1000	10% discount to BIS
4.1.1(INSULATION : General Purjose Insulaiion)	-	1000	10% discount to BIS
4.1.2(INSULATION : Heat Resisting Insulation)	-	1000	10% discount to BIS
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	1000	10% discount to BIS
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	1000	10% discount to BIS
6.1(MATERIALS : ARMGURING)	-	1000	10% discount to BIS
6.2(MATERIALS : ARMGURING)	-	1000	10% discount to BIS
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	1000	10% discount to BIS
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	1000	10% discount to BIS
8.1(CONSTRUCTION : CONDUCTOR)	-	1000	10% discount to BIS
8.2(CONSTRUCTION : CONDUCTOR)	-	1000	10% discount to BIS
9.1(INSULATION )	-	1000	10% discount to BIS
9.2(INSULATION : Thickness of Insulation)	-	1000	10% discount to BIS
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	1000	10% discount to BIS
9.4(INSULATION : Application of Insulation)	-	1000	10% discount to BIS
10.1(CORE IDENTIFICATION)	-	1000	10% discount to BIS
10.2(CORE IDENTIFICATION)	-	1000	10% discount to BIS
10.3(CORE IDENTIFICATION)	-	1000	10% discount to BIS
10.3.1(Arrangement of Marking)	-	1000	10% discount to BIS
11.1(LAYING UP OF CORES)	-	1000	10% discount to BIS
11.2(LAYING UP OF CORES)	-	1000	10% discount to BIS
12.1(INNER SHEATH)	-	1000	10% discount to BIS
12.2(INNER SHEATH)	-	1000	10% discount to BIS
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	1000	10% discount to BIS
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	1000	10% discount to BIS
13.1.1(ARMOURING : Application)	-	1000	10% discount to BIS
13.1.2(Armouring: Coverage )	-	1000	10% discount to BIS
13.1.3(ARMOURING : Direction of lay )	-	1000	10% discount to BIS
13.1.4(ARMOURING : Application)	-	1000	10% discount to BIS
13.2(ARMOURING : Type of Armour)	-	1000	10% discount to BIS
13.2.1(ARMOURING : Type of Armour)	-	1000	10% discount to BIS
13.3(Armouring : Dimensions -Wire Diameter)	-	1000	10% discount to BIS
13.3(Armouring : Dimensions -Formed wire )	-	1000	10% discount to BIS
13.4(ARMOURING : Joints)	-	1000	10% discount to BIS
13.5.1(ARMOURING : Resistance)	-	1000	10% discount to BIS
13.5.2(ARMOURING : Resistance)	-	1000	10% discount to BIS
13.6 a)(ARMOURING: Tensile Strength)	-	1000	10% discount to BIS
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	10% discount to BIS
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	10% discount to BIS
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	10% discount to BIS
13.6 f)(ARMOURING: Mass of zinc coating )	-	1000	10% discount to BIS
13.6 g)(ARMOURING: Resistivity)	-	1000	10% discount to BIS
13.6 b)(ARMOURING: Elongation )	-	1000	10% discount to BIS
14.1(OUTER SHEATH)	-	1000	10% discount to BIS
14.2(OUTER SHEATH)	-	1000	10% discount to BIS
14.3(OUTER SHEATH : Colour )	-	1000	10% discount to BIS
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	1000	10% discount to BIS
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	1000	10% discount to BIS
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	1000	10% discount to BIS
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	1000	10% discount to BIS
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	1000	10% discount to BIS
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	1000	10% discount to BIS
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	1000	10% discount to BIS
15.1 a) 4)(Resistance test - Neutral conductor )	-	1000	10% discount to BIS
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	1000	10% discount to BIS
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	1000	10% discount to BIS
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	1000	10% discount to BIS
15.1 d)1)(Physical tests for sheath : Elongation )	-	1000	10% discount to BIS
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	1000	10% discount to BIS
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	1000	10% discount to BIS
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1000	10% discount to BIS
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1000	10% discount to BIS
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1000	10% discount to BIS
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1000	10% discount to BIS
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	1000	10% discount to BIS
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	1000	10% discount to BIS
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	1000	10% discount to BIS
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	1000	10% discount to BIS
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	1000	10% discount to BIS
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1000	10% discount to BIS
15.1 d)4)(Hot deformation : Insulation )	-	1000	10% discount to BIS
15.1 d)4)(Hot deformation : Sheath )	-	1000	10% discount to BIS
15.1 d)5)( Loss of mass in air oven- Insulation )	-	1000	10% discount to BIS
15.1 d)5)( Loss of mass in air oven- sheath )	-	1000	10% discount to BIS
15.1 d)6)(Heat shock test- Insulation )	-	1000	10% discount to BIS
15.1 d)6)(Heat shock test- sheath )	-	1000	10% discount to BIS
15.1 d)7)(Thermal stability- insulation )	-	1000	10% discount to BIS
15.1 d)7)(Thermal stability- Sheath )	-	1000	10% discount to BIS
15.1 e)(Insulation resistance test : Volume Resistivity )	-	1000	10% discount to BIS
15.1 e)(Insulation resistance test : IR Constant )	-	1000	10% discount to BIS
15.1 f)(High voltage test ( water immersion test ))	-	1000	10% discount to BIS
15.1 g)(High voltage test at room temperature)	-	1000	10% discount to BIS
15.1 g)(High voltage test at room temperature)	-	1000	10% discount to BIS
15.4 a)(Cold bend test- Insulation ( Optional test))	-	1000	10% discount to BIS
15.4 a)(Cold bend test- Sheath ( Optional test))	-	1000	10% discount to BIS
15.4 b)(Cold impact test- Insulation ( Optional test))	-	1000	10% discount to BIS
15.4 b)(Cold impact test- Sheath ( Optional test))	-	1000	10% discount to BIS
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	1000	10% discount to BIS
16.1(DETAILS OF TESTS : General)	-	1000	10% discount to BIS
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	1000	10% discount to BIS
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	1000	10% discount to BIS
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	1000	10% discount to BIS
16.4(Flammability Test)	-	1000	10% discount to BIS
16.5(Oxygen Index Test)	-	1000	10% discount to BIS
16.6(Flame Retardance Test on Single Cables)	-	1000	10% discount to BIS
16.7(Flame Retardance Test on Bunched Cables)	-	1000	10% discount to BIS
16.9(Test for Halogen Acid Gas Evolution)	-	1000	10% discount to BIS
16.1(Temperature Index)	-	1000	10% discount to BIS
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	1000	10% discount to BIS
17.2.1(IDENTIFICATION : Cable Identification)	-	1000	10% discount to BIS
17.2(IDENTIFICATION : Cable Identification)	-	1000	10% discount to BIS
17.3(IDENTIFICATION : Cable Code)	-	1000	10% discount to BIS
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	1000	10% discount to BIS
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	1000	10% discount to BIS
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	1000	10% discount to BIS
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	1000	10% discount to BIS
16.4(Flammability Test- Un affected portion)	-	1000	10% discount to BIS
16.4(Flammability Test- Period of Burning)	-	1000	10% discount to BIS
9.3(Minimum Thickness of Reduce core insulation)	-	1000	10% discount to BIS
9.2(Thickness of Reduce core insulation)	-	1000	10% discount to BIS
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	1000	10% discount to BIS
Cl No. 16.10(Smoke density test)	-	1000	10% discount to BIS
Cl No. 16.8(Test for specific optical density of smoke)	-	1000	10% discount to BIS
Table 4(Copper purity test)	-	1000	10% discount to BIS

07 Sep, 2026

-
Included w.e.f. 11-09-2024.

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	1000	10% discount to BIS
6(ARMOURING)	-	1000	10% discount to BIS
7(OUTER SHEATH)	-	1000	10% discount to BIS
8.1(CONDUCTOR: CONSTRUCTION)	-	1000	10% discount to BIS
5.1(FILLER AND INNER SHEATH)	-	1000	10% discount to BIS
5.2(FILLER AND INNER SHEATH)	-	1000	10% discount to BIS
8.2(PROTECTIVE BARRIER)	-	1000	10% discount to BIS
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	1000	10% discount to BIS
9.1(Insulation Applied by extrusicn)	-	1000	10% discount to BIS
9.2(Thickness of Insulation - Average)	-	1000	10% discount to BIS
9.3(Thickness of Insulation - Minimum)	-	1000	10% discount to BIS
9.4(Application of Insulation)	-	1000	-
10.1(Core Identification)	-	1000	10% discount to BIS
10.2(Core Identification- Neutral)	-	1000	10% discount to BIS
10.3(Core Identification by number )	-	1000	10% discount to BIS
10.4(Core Identification by number - Neutral )	-	1000	10% discount to BIS
11(LAVING UP OF CORES)	-	1000	10% discount to BIS
12.1 & 12.2(Inner sheath : Application)	-	1000	10% discount to BIS
12.3(Thickness of Inner Sheath)	-	1000	10% discount to BIS
13.1(Armouring: Application)	-	1000	10% discount to BIS
13.1.2(Armouring: Coverage )	-	1000	10% discount to BIS
13.1.3(Armouring: Direction of Lay )	-	1000	10% discount to BIS
13.2(Type of armour )	-	1000	10% discount to BIS
13.3(Armouring : Dimensions -Wire Diameter)	-	1000	10% discount to BIS
13.3(Armouring : Dimensions -Formed wire )	-	1000	10% discount to BIS
13.4(Armour: Joint)	-	1000	10% discount to BIS
13.5(Armouring : Resistance Test)	-	1000	10% discount to BIS
13.6 a)(ARMOURING: Tensile Strength)	-	1000	10% discount to BIS
13.6 b)(ARMOURING: Elongation )	-	1000	10% discount to BIS
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	1000	10% discount to BIS
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	1000	10% discount to BIS
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	1000	10% discount to BIS
13.6 f)(ARMOURING: Mass of zinc coating )	-	1000	10% discount to BIS
13.6 g)(ARMOURING: Resistivity)	-	1000	-
14.1(Outer Sheath : Application)	-	1000	-
14.2(Colour of outer sheath)	-	1000	-
14.3(Thickness of outer sheath - AVERAGE)	-	1000	-
14.3(Thickness of outer sheath - minimum)	-	1000	10% discount to BIS
15.1 a) i)(Annealing Test ( For copper wire ) )	-	1000	10% discount to BIS
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	1000	10% discount to BIS
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	1000	10% discount to BIS
15.1 a) iii)(Wrapping test (for aluminium))	-	1000	10% discount to BIS
15.1 a) iv)(Resistance test - Main conductor)	-	1000	10% discount to BIS
15.1 a) iv)(Resistance test - Neutral conductor)	-	1000	10% discount to BIS
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	1000	10% discount to BIS
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	1000	10% discount to BIS
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	1000	10% discount to BIS
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	1000	10% discount to BIS
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	1000	10% discount to BIS
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	1000	10% discount to BIS
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	1000	10% discount to BIS
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	1000	10% discount to BIS
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	1000	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	1000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	1000	10% discount to BIS
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	1000	10% discount to BIS
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	1000	10% discount to BIS
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	1000	10% discount to BIS
15.1 e) v) (Sheath : Hot deformation)	-	1000	10% discount to BIS
15.1 e) vi) (Sheath : Heat shock test)	-	1000	10% discount to BIS
15.1 e) vii) (Sheath : Thermalstability)	-	1000	10% discount to BIS
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	1000	10% discount to BIS
16.2(HIGH VOLTAGE TEST )	-	1000	10% discount to BIS
16.3(FLAMMABILITY TEST : Period of Burning )	-	1000	10% discount to BIS
16.3(FLAMMABILITY TEST : Unaffected length )	-	1000	10% discount to BIS
16.9(Oxygen Index Test)	-	1000	10% discount to BIS
16.1(Flame Retardance Test on Single Cables)	-	1000	10% discount to BIS
16.11(Flame Retardance Test on Bunched Cables)	-	1000	10% discount to BIS
16.13(Test for Halogen Acid Gas Evolution)	-	1000	10% discount to BIS
16.14(Temperature Index)	-	1000	10% discount to BIS
17.1(Manufacturer'. identification)	-	1000	10% discount to BIS
17.2(cable Indentification )	-	1000	10% discount to BIS
17.3(cable Code )	-	1000	10% discount to BIS
15.4 (a)(Cold bend)	-	1000	10% discount to BIS
15.4 (b)(Cold impact)	-	1000	10% discount to BIS
Table 1(Ageing in air oven - Elongation on Insulation)	-	1000	10% discount to BIS
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	1000	10% discount to BIS
Table 1(Ageing in air oven - Elongation on Insulation)	-	1000	10% discount to BIS
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	1000	10% discount to BIS
Table 4(Copper purity test)	-	1000	10% discount to BIS
Cl No. 16.15(Smoke density test)	-	1000	10% discount to BIS
Table 2(Cold Impact test for Outer sheath)	-	1000	10% discount to BIS
Table 2(Cold bend test for Outer sheath)	-	1000	10% discount to BIS
Cl 16(Halogen Acid Gas Test)	-	1000	10% discount to BIS
Cl 16(Halogen Acid Gas Test)	-	1000	10% discount to BIS
Cl 16(Halogen Acid Gas Test)	-	1000	10% discount to BIS
4(INSULATION : MATERIALS)	-	1000	10% discount to BIS
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	1000	10% discount to BIS

07 Sep, 2026

-
Included w.e.f. 11-09-2024.

IS 694 (2010)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 450/750 v (Fourth Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.9(Additional ageing test (OU cables only) -HV test (at 60±3oC))	-	1000	10% discount to BIS
10.4(Flammability test- Unaffected portion)	-	1000	10% discount to BIS
10.4(Flammability test-Burning after flame removal)	-	1000	10% discount to BIS
table 1 e) 3) (IR constant- max. Temp)	-	1000	10% discount to BIS
table 1 e) 3) (IR constant- Room temp )	-	1000	10% discount to BIS
table 1 e) 3) (Volume Resistivity - Maximum temp)	-	1000	10% discount to BIS
table 1 e) 3) (Volume Resistivity - Room temp )	-	1000	10% discount to BIS
10.2(HV (room temperature))	-	1000	10% discount to BIS
10.1(HV (water immersion))	-	1000	10% discount to BIS
10.1(HV (water immersion))	-	1000	10% discount to BIS
10.8(Smoke density rating)	-	1000	10% discount to BIS
10.6(Halogen evolution)	-	1000	10% discount to BIS
10.7(Temperature index)	-	1000	10% discount to BIS
10.5(Oxygen index)	-	1000	10% discount to BIS
Table 1 iii) d) 9)(Cold impact for sheath)	-	1000	10% discount to BIS
Table 1 iii) d) 8)(Cold bend for sheath)	-	1000	10% discount to BIS
Table 1 iii) c) 9)(Cold impact for insulation)	-	1000	10% discount to BIS
Table 1 iii) c) 8)(Cold bend for insulation)	-	1000	10% discount to BIS
Table 1 iii) d) 7)(Thermal stability- Sheath )	-	1000	10% discount to BIS
Table 1 iii) c) 7)(Thermal stability- Insulation )	-	1000	10% discount to BIS
Table 1 iii) d) 6)(Hot deformation -Indentation depth - Sheath )	-	1000	10% discount to BIS
Table 1 iii) c) 6)(Hot deformation - Indentation depth- Insulation)	-	1000	10% discount to BIS
Table 1 iii) d) 5)(Heat shock-Sheath )	-	1000	10% discount to BIS
Table 1 iii) c) 5)(Heat shock-Insulation )	-	1000	10% discount to BIS
Table 1 iii) d) 4)(Shrinkage- Sheath )	-	1000	10% discount to BIS
Table 1 iii) c) 4)(Shrinkage-Insulation)	-	1000	10% discount to BIS
Table 1 iii) d) 2)(Loss of mass- Sheath )	-	1000	10% discount to BIS
Table 1 iii) c) 2)(Loss of mass- Insulation )	-	1000	10% discount to BIS
Table 1 iii) d) 3)(Sheath- Tensile strength (After ageing))	-	1000	10% discount to BIS
Table 1 iii) d) 1)(Sheath- Elongation (Without ageing))	-	1000	10% discount to BIS
Table 1 iii) d) 1)(Sheath -Tensile strength (Without ageing))	-	1000	10% discount to BIS
Table 1 iii) c) 3)(Elongation (After ageing))	-	1000	10% discount to BIS
Table 1 iii) c) 3)(Tensile strength (After ageing))	-	1000	10% discount to BIS
Table 1 iii) c) 1)(Elongation (Without ageing))	-	1000	10% discount to BIS
Table 1 iii) c) 1)(Tensile strength (Without ageing))	-	1000	10% discount to BIS
8.3(Thickness of Sheath)	-	1000	10% discount to BIS
5.3(Thickness of Insulation)	-	1000	10% discount to BIS
9(Overall dimensions)	-	1000	10% discount to BIS
10.11(Per sulphate test (for tinned Cu cable only))	-	1000	10% discount to BIS
4.2(Conductor resistance test)	-	1000	10% discount to BIS
4.1(Wrapping test (for Al))	-	1000	10% discount to BIS
4.1(Tensile test (for Al)- After Stranding)	-	1000	10% discount to BIS
4.1(Tensile test (for Al)-Before Stranding)	-	1000	10% discount to BIS
4.1(Annealing test (for copper))	-	1000	10% discount to BIS
(Cl.16.1) (Cl.19.1)(Conductor- Diameter )	-	1000	10% discount to BIS
8.3(Avarage thickness of Sheath)	-	1000	10% discount to BIS
Table 1 iii) c) 4)(Cracks Observed)	-	1000	10% discount to BIS
(Cl. 18.1.3) (Cl. 19.1.4) (Cl. 20.1.3) (Cl. 21.1.3) (Cl. 22.1.3)(Assembly of cores )	-	1000	10% discount to BIS
(Cl.6.1.3 of IS 8130:2013)(Flexible Conductors (Classes 5))	-	1000	10% discount to BIS
Table 2, IS 8130(No fo wire in a conductor)	-	1000	10% discount to BIS
Table 1(Category Code)	-	1000	10% discount to BIS
Table 1 iii) d) 4)(Cracks Observed)	-	1000	10% discount to BIS
Table 1 iii) c) 3)(Elongation variation)	-	1000	10% discount to BIS
Table 1 iii) c) 3)(TS variation)	-	1000	10% discount to BIS
(Cl. 18.1.4) (Cl. 19.1.5) (Cl. 20.1.4) (Cl. 22.1.4)(Colour of Sheath)	-	1000	10% discount to BIS
9.1(Ovality)	-	1000	10% discount to BIS
(Cl.6.1.3 of IS 8130:2013)( Flexible Conductors (Classes 5))	-	1000	10% discount to BIS
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors(Class-2))	-	1000	10% discount to BIS
(Cl.6.1.3 of IS 8130:2013)(Stranded compacted circular conductors and shaped conductors (Class 2))	-	1000	10% discount to BIS
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	1000	10% discount to BIS
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	1000	10% discount to BIS
(Cl.6.1.3 of IS 8130:2013)(Solid Conductor (Class 1))	-	1000	10% discount to BIS
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	1000	10% discount to BIS
(Cl.6.1 of IS 8130:2013)(Solid Conductor (Class 1))	-	1000	10% discount to BIS
(Cl.16.1) (Cl.19.1)(Conductor)	-	1000	10% discount to BIS
(Cl.16.1) (Cl.19.1)(Conductor)	-	1000	10% discount to BIS
10.3(Spark Test)	-	1000	10% discount to BIS
(Cl.16.1) (Cl.19.1)(Conductor)	-	1000	10% discount to BIS
8.1(Sheath Material )	-	1000	10% discount to BIS
5.1(Insulation)	-	1000	10% discount to BIS
4.1(Conductor - Material)	-	1000	10% discount to BIS
4.1(Conductor - Material)	-	1000	10% discount to BIS
10.11(Persulphate Test )	-	1000	10% discount to BIS
4, IS 8130(Construction of conductor)	-	1000	10% discount to BIS
8.3(Minimum thickness of Sheath)	-	1000	10% discount to BIS
Table 1 iii) d) 3)(Sheath- Elongation (After ageing))	-	1000	10% discount to BIS
5.3(Minimum thickness of insulation)	-	1000	10% discount to BIS
5.3(Avarage thickness of insulation)	-	1000	10% discount to BIS
table 1, 4.2(insulation resistance test)	-	1000	10% discount to BIS
5.4(Mechanical properties before and after ageing)	-	1000	10% discount to BIS
4.1(Material)	-	1000	10% discount to BIS
4.2(Electrical Resistance)	-	1000	10% discount to BIS
5(INSULATION)	-	1000	10% discount to BIS
8(SHEATH)	-	1000	10% discount to BIS
9(OVERALL DIMENSIONS)	-	1000	10% discount to BIS
10.1(High Voltage Test (Water Immersion Test))	-	1000	10% discount to BIS
10.2(High Voltage Test (at Room Temperature))	-	1000	10% discount to BIS
10.4(Flammability Test)	-	1000	10% discount to BIS
10.5(Oxygen Index Test)	-	1000	10% discount to BIS
10.6(Test for Halogen Acid Gas Evolution)	-	1000	10% discount to BIS
10.7(Test for Temperature Index)	-	1000	10% discount to BIS
10.8(Smoke Density Rating)	-	1000	10% discount to BIS
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	1000	10% discount to BIS
10.11(Persulphate Test)	-	1000	10% discount to BIS
13(Cable code)	-	1000	10% discount to BIS
13(CABLE CODE)	-	1000	10% discount to BIS
11.2(Legibility)	-	1000	10% discount to BIS
11.1(Durability)	-	1000	10% discount to BIS
11(Identification)	-	1000	10% discount to BIS
11(IDENTIFICATION)	-	1000	10% discount to BIS
12(CONSTRUCTION Core Identification)	-	1000	10% discount to BIS
12(CORE IDENTIFICATION)	-	1000	10% discount to BIS
7(Binder Tape)	-	1000	10% discount to BIS
6.2(Filler)	-	1000	10% discount to BIS
6.1(Filler)	-	1000	10% discount to BIS
6(FILLER)	-	1000	10% discount to BIS
7(BINDER TAPE)	-	1000	10% discount to BIS
4.4(Joints in Conductor)	-	1000	10% discount to BIS
4.4(Joints in Conductor)	-	1000	10% discount to BIS
12.0(Core identification)	-	1000	10% discount to BIS
10.3(Spark test)	-	1000	10% discount to BIS
10.3(Spark Test)	-	1000	10% discount to BIS
5.2(Application )	-	1000	10% discount to BIS
15(PACKING AND MARKING)	-	1000	10% discount to BIS
16.1(Construction)	-	1000	10% discount to BIS
16.2(Tests)	-	1000	10% discount to BIS
17(SINGLE CORE NON-SHEATHED CABLES WITH FLEXIBLE CONDUCTOR FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	1000	10% discount to BIS
18(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-	1000	10% discount to BIS
19(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES/CORDS WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	1000	10% discount to BIS
20(MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	1000	10% discount to BIS
21(ARALLEL TWIN AND TWISTED TWIN FLEXIBLE PVC INSULATED UNSHEATHED CORDS (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	1000	10% discount to BIS
22(TWO AND THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED (CLASS 2 OR 5) FOR GENERAL PURPOSE( FOR MAXIMUM CONDUCTOR TEMPERA TURE 70°C OR 85°C))	-	1000	10% discount to BIS
Table 1 iii) d) 3)(Sheath- Elongation variation)	-	1000	10% discount to BIS
Table 1 iii) d) 3)(Sheath- TS variation)	-	1000	10% discount to BIS
Table 4(Copper purity test)	-	1000	10% discount to BIS
10.1(Flex Test)	-	1000	10% discount to BIS
5.3(Thickness of Insulation)	-	1000	10% discount to BIS
(Cl.6.1.3 of IS 8130:2013)(Stranded circular non compacted conductors (Class-2))	-	1000	10% discount to BIS
10.3(Spark Test)	-	1000	10% discount to BIS
table 1, 4.2(insulation resistance test)	-	1000	10% discount to BIS
5.4(Mechanical properties before and after ageing)	-	1000	10% discount to BIS
4.1(Material)	-	1000	10% discount to BIS
4.2(Electrical Resistance)	-	1000	10% discount to BIS
5(INSULATION)	-	1000	10% discount to BIS
8(SHEATH)	-	1000	10% discount to BIS
9(OVERALL DIMENSIONS)	-	1000	10% discount to BIS
10.1(High Voltage Test (Water Immersion Test))	-	1000	10% discount to BIS
10.2(High Voltage Test (at Room Temperature))	-	1000	10% discount to BIS
10.4(Flammability Test)	-	1000	10% discount to BIS
10.5(Oxygen Index Test)	-	1000	10% discount to BIS
10.6(Test for Halogen Acid Gas Evolution)	-	1000	10% discount to BIS
10.7(Test for Temperature Index)	-	1000	10% discount to BIS
10.8(Smoke Density Rating)	-	1000	10% discount to BIS
10.9(Additional Ageing Test (for Cables for Outdoor Use)	-	1000	10% discount to BIS
10.11(Persulphate Test)	-	1000	10% discount to BIS
13(CABLE CODE)	-	1000	10% discount to BIS
11(IDENTIFICATION)	-	1000	10% discount to BIS
12(CORE IDENTIFICATION)	-	1000	10% discount to BIS
6(FILLER)	-	1000	10% discount to BIS
7(BINDER TAPE)	-	1000	10% discount to BIS
10.3(Spark test)	-	1000	10% discount to BIS
10.3(Spark Test)	-	1000	10% discount to BIS
15(PACKING AND MARKING)	-	1000	10% discount to BIS
16.1(Construction)	-	1000	10% discount to BIS
16.2(Tests)	-	1000	10% discount to BIS
17(SINGLE CORE NON-SHEATHED CABLES WITH FLEXIBLE CONDUCTOR FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	1000	10% discount to BIS
18(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH RIGID CONDUCTOR (CLASS 1 AND CLASS 2) FOR GENERAL PURPOSE ) FOR MAXIMUM CONDUCTOR TEMPERATURE (70°C OR 85°C))	-	1000	10% discount to BIS
19(SINGLE AND MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES/CORDS WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	1000	10% discount to BIS
20(MULTICORE CIRCULAR PVC INSULATED AND SHEATHED CABLES WITH FLEXIBLE CONDUCTOR (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	1000	10% discount to BIS
21(ARALLEL TWIN AND TWISTED TWIN FLEXIBLE PVC INSULATED UNSHEATHED CORDS (CLASS 5) FOR GENERAL PURPOSE (FOR MAXIMUM CONDUCTOR TEMPERATURE 70°C OR 85°C))	-	1000	10% discount to BIS
22(TWO AND THREE CORE FLAT CABLES WITH PVC INSULATION AND SHEATHED (CLASS 2 OR 5) FOR GENERAL PURPOSE( FOR MAXIMUM CONDUCTOR TEMPERA TURE 70°C OR 85°C))	-	1000	10% discount to BIS
Table 4(Copper purity test)	-	1000	10% discount to BIS
10.1(Flex Test)	-	1000	10% discount to BIS

07 Sep, 2026

-
-

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

30000 View breakup
Rs.30000/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	370	10% discount to BIS
6(Classification )	-	370	10% discount to BIS
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	370	10% discount to BIS
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	370	10% discount to BIS
(Cl.11 of 302-2-21:2011)(Heating)	-	370	10% discount to BIS
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	370	10% discount to BIS
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	370	10% discount to BIS
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	370	10% discount to BIS
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	370	10% discount to BIS
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	370	10% discount to BIS
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	370	10% discount to BIS
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	370	10% discount to BIS
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	370	10% discount to BIS
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	370	10% discount to BIS
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	370	10% discount to BIS
(Cl.24ofIS302-221:2011)(Component)	-	370	10% discount to BIS
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	370	10% discount to BIS
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	370	10% discount to BIS
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	370	10% discount to BIS
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	370	10% discount to BIS
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	370	10% discount to BIS
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	370	10% discount to BIS
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	370	10% discount to BIS
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	370	10% discount to BIS
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	370	10% discount to BIS
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	370	10% discount to BIS
(Cl.18 of IS 2082:2018)( Reheating Time)	-	370	10% discount to BIS
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	370	10% discount to BIS
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	370	10% discount to BIS
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	370	10% discount to BIS
(Cl.22 of IS 2082:2018)(Finish)	-	370	10% discount to BIS
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	370	10% discount to BIS
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	370	10% discount to BIS
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	370	10% discount to BIS
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	370	10% discount to BIS
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	370	10% discount to BIS
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	370	10% discount to BIS
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	370	10% discount to BIS
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	370	10% discount to BIS
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	370	10% discount to BIS
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	370	10% discount to BIS
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	370	10% discount to BIS
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	370	10% discount to BIS
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	370	10% discount to BIS
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	370	10% discount to BIS
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	370	10% discount to BIS
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	370	10% discount to BIS
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	370	10% discount to BIS
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	370	10% discount to BIS
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	370	10% discount to BIS
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	370	10% discount to BIS
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	370	10% discount to BIS
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	370	10% discount to BIS
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	370	10% discount to BIS
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	370	10% discount to BIS
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	370	10% discount to BIS
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	370	10% discount to BIS
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	370	10% discount to BIS
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	370	10% discount to BIS
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	370	10% discount to BIS
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	370	10% discount to BIS
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	370	10% discount to BIS
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	370	10% discount to BIS
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	370	10% discount to BIS
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	370	10% discount to BIS
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	370	10% discount to BIS
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	370	10% discount to BIS
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	370	10% discount to BIS
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	370	10% discount to BIS
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	370	10% discount to BIS
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	370	10% discount to BIS
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	370	10% discount to BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	370	10% discount to BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	370	10% discount to BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	370	10% discount to BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	370	10% discount to BIS
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	370	10% discount to BIS
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	370	10% discount to BIS
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	1140	10% discount to BIS

07 Sep, 2026

-
Included w.e.f. 11-01-2022.

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	9000	10% discount to BIS
5.2(Message Readability)	-	8000	10% discount to BIS
6(Marking)	-	8000	10% discount to BIS
5.1(Inputting of text)	-	9000	10% discount to BIS
5.2(Message Readability)	-	8000	10% discount to BIS
6(Marking)	-	8000	10% discount to BIS

07 Sep, 2026

-
Included w.e.f. 05-01-2023.

IS 16270 (2014)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

626400 View breakup
Restricted to Rs.6,26,400/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Condition of use)	-	55000	10% discount to BIS
5.1(Mechanical Endurance)	-	55000	10% discount to BIS
5.2(Charge efficiency)	-	53000	10% discount to BIS
5.3(Deep discharge protection)	-	55000	10% discount to BIS
5.4(Marking)	-	52000	10% discount to BIS
5.5(Dafety)	-	53000	10% discount to BIS
5.6(Documentation)	-	54000	10% discount to BIS
6(Finctional Characteristics)	-	57000	10% discount to BIS
7(General test conditions)	-	57000	10% discount to BIS
8.1(Capacity test)	-	53000	10% discount to BIS
8.2(Endurance test)	-	55000	10% discount to BIS
8.3(Charge retention test)	-	53000	10% discount to BIS
8.4(Cycle endurance in Photovoltaic application)	-	57000	10% discount to BIS
8.5(Sulphation Test)	-	54000	10% discount to BIS
8.6(Water loss test)	-	57000	10% discount to BIS
8.7(Non spillability)	-	55000	10% discount to BIS

07 Sep, 2026

-
Included w.e.f. 11-01-2022.

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

ELECTRIC IMMERSION WATER HEATERS

30000 View breakup
Rs.30000/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	2000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.18 of IS 368:2014(Endurance)	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	2000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	2000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	2000	-

07 Sep, 2026

-
Included w.e.f. 11-01-2022.

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

ELECTRIC INSTANT WATER HEATERS

22545 View breakup
Rs.22545/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-2-35:2017(Classification)	-	375	-
Cl.7 of IS 302-2-35:2017(Marking)	-	375	-
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	375	-
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	375	-
Cl.11 of 302-2-35:2017(Heating)	-	375	-
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	375	-
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	375	-
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	375	-
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	375	-
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	375	-
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	375	-
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	375	-
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	375	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	375	-
Cl.22 of IS 302-2-35-2011(Construction )	-	375	-
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	375	-
Cl.24 of IS 302-2-35:2017(Component )	-	375	-
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	375	-
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	375	-
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	375	-
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	375	-
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	375	-
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	375	-
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	375	-
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	375	-
Cl.10 of IS 8978 : 1992(Finish)	-	375	-
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	375	-
Cl.12 of IS 8978 : 1992(Endurance)	-	375	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	375	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	375	-
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	375	-
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	375	-
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	375	-
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	375	-
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	375	-
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	375	-
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	375	-
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	375	-
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	375	-
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	375	-
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	375	-
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	375	-
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	375	-
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	375	-
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	375	-
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	375	-
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	375	-
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	375	-
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	375	-
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	375	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	375	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	375	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	375	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	375	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	375	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	375	-
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	375	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	375	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	375	-
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	375	-
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	375	-
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	375	-
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	375	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	375	-
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	375	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	375	-
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	375	-
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	375	-
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	300	-
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	300	-
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	300	-
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	300	-
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	300	-
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	300	-
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	300	-
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	300	-
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	300	-
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	300	-
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	300	-
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	300	-
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	300	-
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	300	-
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	300	-

07 Sep, 2026

-
Included w.e.f. 11-01-2022.

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

ELECTRIC IMMERSION WATER HEATERS

15125 View breakup
Rs.15125/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	1000	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	1000	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	1000	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	2000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	2000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	2000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	2000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	2000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	2000	-

07 Sep, 2026

-
Included w.e.f. 11-01-2022.. Exclusions: EMI/EMC tests (Cl.19.11.4.1 to 19.11.4.7)

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

ELECTRIC INSTANT WATER HEATERS

22500 View breakup
Rs.22500/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6 IS 302-2-35(Classification)	-	1000	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	1000	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	2000	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	1000	-
Cl. 11 IS 302-2-35(Heating)	-	1000	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	2000	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	1000	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	2000	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	1000	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	1000	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	1000	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	1000	-
Cl. 22 IS 302-2-35(Construction )	-	1000	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	1000	-
Cl. 24 IS 302-2-35(Components)	-	1000	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	1000	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	1000	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	1000	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	1000	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	1000	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	2000	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	2000	-
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	2000	-

07 Sep, 2026

-
Included w.e.f. 11-01-2022.. Exclusions: EMI/EMC tests (Cl.19.11.4.1 to 19.11.4.7)

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

STATIONARY STORAGE TYPE ELECTRIC WATER HEATERS

30000 View breakup
Rs.30000/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	1000	-
7.0(Marking and Instructions)	-	1000	-
8.0(Protection against access to live parts)	-	2000	-
10.0(Input and Current)	-	2000	-
11.0(Heating)	-	2000	-
13.0(Leakage Current and electric strength at operating temperature)	-	2000	-
14.0(Transient Overvoltage)	-	1000	-
15.0(Moisture resistance)	-	1000	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	-
17.0(Overload Protection of transformer and associated circuit)	-	1000	-
19.0(Abnormal Operation)	-	1000	-
20.0(Stability and mechanical hazards)	-	1000	-
21.0(Mechanical Strength)	-	1000	-
22.0(Construction)	-	1000	-
23.0(Internal Wiring)	-	1000	-
24(Components)	-	1000	-
25.0(Supply Connection and External Flexible Cords)	-	1000	-
26.0(Terminals for external conductors)	-	1000	-
27.0(Provision For Earthing)	-	1000	-
28.0(Screws and Connections)	-	1000	-
29.0(Creepage Distances and Clearances)	-	2000	-
30.0(Resistance To Heat and Fire)	-	2000	-
31.0(Resistance To Rusting)	-	2000	-

07 Sep, 2026

-
Included w.e.f. 11-01-2022. Exclusions: EMI/EMC tests (Cl.19.11.4.1 to 19.11.4.7)

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

RICE COOKER

17950 View breakup
Rs.17950/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	2000	-
7(Marking and instructions)	-	1000	-
8(Protection against live parts)	-	2000	-
10(POWER INPUT AND CURRENT)	-	2000	-
11(HEATING)	-	2000	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2000	-
14(TRANSIENT OVERVOLTAGES)	-	2000	-
15(MOISTURE RESISTANCE)	-	2000	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	2000	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	-
21(MECHANICAL STRENGTH)	-	2000	-
22(CONSTRUCTION)	-	1000	-
23(INTERNAL WIRING)	-	2000	-
24(COMPONENTS)	-	1000	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	2000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	-
27(PROVISION FOR EARTHING)	-	2000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	2000	-
30(RESISTANCE TO HEAT AND FIRE)	-	2000	-
31(RESISTANCE TO RUSTING)	-	2000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	2000	-
22.16(Automatic cord reel)	-	2000	-
22.47(Water pressure inlet)	-	2000	-
22.3(Flexing test)	-	2000	-

07 Sep, 2026

-
Included w.e.f. 11-01-2022. Exclusions: EMI/EMC tests (Cl.19.11.4.1 to 19.11.4.7)

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

ADAPTERS FOR HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCE

50000 View breakup
Rs.50000/-(20% discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	-
8.1.1(Protection against live parts in all positions)	-	1000	-
8.1.2(Protection against live parts in openings)	-	1000	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	-
8.1.4(Protection against live parts against protective impedance)	-	1000	-
10.1(Power input)	-	1000	-
10.2(Current input)	-	1000	-
11.1(General)	-	1000	-
11.2(General)	-	1000	-
11.3(Heating)	-	1000	-
13.1(General)	-	1000	-
13.2(Leakage current at operating temperature)	-	1000	-
13.3(Electric Strength at operating temperature)	-	1000	-
14(Transient Over Voltages)	-	1000	-
15.0(General)	-	1000	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	-
15.2(Spillage Test)	-	1000	-
15.3(Humidity Test)	-	1000	-
16.0(General)	-	1000	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
16.1(General)	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1000	-
19(Abnormal Operation)	-	1000	-
20(Stability test)	-	1000	-
21(Mechanical Strength Test)	-	1000	-
22(Construction verification related test)	-	1000	-
23(General)	-	1000	-
24(Components)	-	1000	-
25(Supply connection and external flexible cords)	-	1000	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screw test and connections)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
30.1(Ball pressure test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
31(Resistance to Rusting)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	1000	-
4(General requirement)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
8.1.5(Live parts of built-in appliances)	-	2000	-
11.4(Heating appliances)	-	2000	-
11.5(Motor-operated appliances)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.7(Duration corresponding)	-	2000	-
11.8(Temperature rise)	-	1000	-

07 Sep, 2026

-
Included w.e.f. 11-01-2022. Exclusions: EMI/EMC tests (Cl.19.11.4.1 to 19.11.4.7)

Bureau of Indian Standards

The National Standards Body of India

IEC TEST LABS LLP

Ground Floor, Plot No. N-47, Pkt-N, Sector-5, Bawana, DSIDC, Delhi-110039, Delhi, North West, Delhi, 110039

9871727340 iectestlabs@gmail.com

Scope List