BIS - LIMS (Laboratory Information Management System)

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

32/41 & 32/40 , South Side of GT Road, UPSIDC Industrial Area,Ghaziabad (Delhi-NCR), Ghaziabad, Ghaziabad, Uttar Pradesh, 201009

9810243870 ekotestinglabs@gmail.com

Scope List

Reset

63 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 6721 (2023)

SANDAL AND SLIPPERS SPECIFICATION First revision

ALL

29000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. No.4(SHAPE AND DESIGN)	-	29000	-
Cl. No.5("SIZE AND FITTINGS ")	-	29000	-
Cl. No.6("CONSTRUCTION ")	-	29000	-
Cl. No.7(MATERIAL)	-	29000	-
Cl. No.8.1, Table no. 1(i),a("Tear strength, (other than moulded upper material) ")	-	29000	-
Cl. No.8.1, Table no. 1(i),b("For all moulded upper material ")	-	29000	-
Cl. No.8.1, Table no. 1(ii)(Flexing endurance)	-	29000	-
Cl. No.8.2,Table no. 2(i)(Tear strength)	-	29000	-
Cl. No.8.2,Table no. 2(ii),a("Abrasion resistance- At dry condition")	-	29000	-
Cl. No.8.2,Table no. 2(ii),b("Abrasion resistance- At wet condition")	-	29000	-
Cl. No.8.3,Table no. 3(i)(Tear strength)	-	29000	-
Cl. No.8.3,Table no. 3(ii),a("Abrasion resistance- At dry condition")	-	29000	-
Cl. No.8.3,Table no. 3(ii),b("Abrasion resistance- At wet condition")	-	29000	-
Cl. No.8.4,Table no. 4(i)(Grain crack index)	-	29000	-
Cl. No.8.4,Table no. 4(ii)(Density)	-	29000	-
Cl. No.8.4,Table no. 4(iii)(Abrasion resistance)	-	29000	-
Cl. No.8.4,Table no. 5(i)(Density)	-	29000	-
Cl. No.8.4,Table no. 5(ii)("Abrasion resistance, Volume loss ")	-	29000	-
Cl. No.8.4, Table no. 5(iii)("Flexing resistance, At 30 000 flexes")	-	29000	-
Cl. No.8.5, Table no. 6(i)("Bond strength, N/mm, Min (Applicable when fore part is fully covered or strap width is more than 25 mm)")	-	29000	-
Cl. No.8.5, Table no. 6(ii)("Toe post attachment strength, N, Min (Applicable if toe post is present)")	-	29000	-
Cl. No.8.5, Table no. 6(iii)("Toe ring attachment strength, Min (Applicable if toe ring is not integral part of upper")	-	29000	-
Cl. No.8.5, Table no. 6(iv)(Strap to outsole strength)	-	29000	-
Cl. No.8.5, Table no. 6(v)("Attachment strength of back strap and Buckle/D-ring ")	-	29000	-
Cl. No.8.5, Table no. 6(vi)("Attachment strength of elastic, limit of useful extension, percent")	-	29000	-
Cl. No.8.5, Table no. 6(vii)("Attachment strength of back strap and velcro, N, Min (If, present)")	-	29000	-
Cl. No.8.5, Table no. 6(viii)("Hydrolysis resistance, Cut growth after 150 000 flexes, mm, Max (Applicable for PU sole only)")	-	29000	-
Cl. No.8.5, Table no. 6(ix)("Heel pull off strength, N, Min (Applicable for heel height 40 mm and above attached separately to the sandal/slipper)")	-	29000	-
Cl. No.8.5, Table no. 6(x)("Inter layer bond strength, N/mm, (Applicable for multi-layer sole)")	-	29000	-
Cl. No.8.5, Table no. 6(xi)("Slip Resistance, Coefficient of Friction (COF) (Not applicable for leather sole) (To be carried out on quarry tiles)")	-	29000	-
Cl. No.8.("Requirement of Complete Sandal and Slipper (Chemical Requirements) ")	-	29000	-
Cl. No.9.(MARKING AND PACKING)	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(iv)(Chromium (VI))	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(vii)(Formaldehyde)	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(viii)(Organotin compounds)	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(x)(pH)	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	29000	-
Cl. No.8.6.1,Table 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	29000	-
Cl. No.8.6.2(Lead content)	-	29000	-
Cl-5 ((Amendment No-1)(Category And Type)	-	29000	-
Cl.8 Table-1 S.No 1, (i) (Amendment No-1)(Bond strength , N/mm, Min)	-	29000	-
Cl.8 Table-1 S.No 1, (ii) (Amendment No-1)(Toe post attachment strength)	-	29000	-
Cl.8 Table-1 S.No 1, (iii) (Amendment No-1)(Toe ring attachment strength)	-	29000	-
Cl.8 Table-1 S.No 1, (iv) (Amendment No-1)(Strap to outsole strength N, Min)	-	29000	-
Cl.8 Table-1 S.No 1, (v) (Amendment No-1)(Attachment strength of back strap and buckle/D-ring N, Min)	-	29000	-
Cl.8 Table-1 S.No 1, (vi) (Amendment No-1)(Limit of useful extension, percent, Min)	-	29000	-
Cl.8 Table-1 S.No 1, (vii) (Amendment No-1)(Attachment strength of back strap and velcro, N, Mi)	-	29000	-
Cl.8 Table-1 S.No 1, (viii) (Amendment No-1)(Hydrolysis resistance)	-	29000	-
Cl.8 Table-1 S.No 1, (ix) (Amendment No-1)(Heel pull off strength)	-	29000	-
Cl.8 Table-1 S.No 1, (x) (Amendment No-1)(Inter layer bond strength)	-	29000	-
Cl.8 Table-1 S.No 1, (xi) (Amendment No-1)(Slip resistance, coefficient of friction (COF)3)	-	29000	-
Cl.8 Table-1 S.No 1, (xii) (Amendment No-1)(Abrasion resistance, (volume loss) mm3 , Max)	-	29000	-
Cl.8 Table-1 S.No 1, (xiv) (Amendment No-1)(Chemical Requirements)	-	29000	-
Cl.8 Table-1 S.No 1, (xv) (Amendment No-1)(Lead content (as Pb)7 ppm)	-	29000	-
Cl.9 Table-2 S.No 1, (i) a (Amendment No-1)(Tear strength for other than moulded upper material)	-	29000	-
Cl.9 Table-2 S.No 1, (i) b (Amendment No-1)(Tear strength For all moulded upper material)	-	29000	-
Cl.9 Table-2 S.No 1, (ii) (Amendment No-1)(Flexing endurance)	-	29000	-
Cl.9 Table-3 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	29000	-
Cl.9 Table-3 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	29000	-
Cl.9 Table-4 S.No 1, (i) (Amendment No-1)(Tear strength, N, Min)	-	29000	-
Cl.9 Table-4 S.No 1, (ii) (Amendment No-1)("Abrasion resistance (a) dry condition (b) wet condition")	-	29000	-
Cl.9 Table-5 S.No 1, (i) (Amendment No-1)(Grain crack index)	-	29000	-
Cl.9 Table-5 S.No 1, (ii) (Amendment No-1)(Density, g/cm3 , Min)	-	29000	-
Cl.9 Table-5 S.No 1, (iii) (Amendment No-1)(Abrasion resistance, mm/kcs)	-	29000	-
Cl.9 Table-6 S.No 1, (i) (Amendment No-1)("Density, g/cm3 , Min (a)-Cellular, (b) Solid ")	-	29000	-
Cl-10 (Amendment No-1)(Marking)	-	29000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	29000	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	29000	-
Cl.8 - Table No 1 - Sl. No.-xiv(pH- IS 1390:2022)	-	29000	-
Cl.8 - Table No 1 - Sl. No.-xv("Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988")	-	29000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	29000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	29000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	29000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	29000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	29000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	29000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	29000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	29000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	29000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	29000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	29000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	29000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	29000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	29000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	29000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	29000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	29000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	29000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	29000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	29000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	29000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	29000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	29000	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	29000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	29000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	29000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	29000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	29000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	29000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	29000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	29000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	29000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	29000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	29000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	29000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	29000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	29000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	29000	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	29000	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	29000	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	29000	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	29000	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	29000	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	29000	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	29000	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	29000	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	29000	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	29000	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	29000	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	29000	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	29000	-
Cl.8 Table-1 S.No 1, (xiii) (Amendment No-1)("Flexing resistance (Belt method or Bennewart flex method)")	-	29000	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	29000	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	29000	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	29000	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	29000	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	29000	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	29000	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	29000	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	29000	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	29000	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	29000	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	29000	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	29000	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	29000	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	29000	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	29000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	29000	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	29000	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	29000	-

-
-

IS 10116 (2015)

Boric acid - Specification (First Revision)

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2, 4.3, 4.4, Table 1(Boric acid (as H3BO3 ))	-	7000	-
4.2, 4.3, 4.4, Table 1(Moisture)	-	7000	-
4.2, 4.3, 4.4, Table 1(Water insoluble matter)	-	7000	-
4.2, 4.3, 4.4, Table 1(Heavy metals (as Pb))	-	7000	-
4.2, 4.3, 4.4, Table 1(Iron (as Fe))	-	7000	-
4.2, 4.3, 4.4, Table 1(Ca)	-	7000	-
4.2, 4.3, 4.4, Table 1(As)	-	7000	-
4.2, 4.3, 4.4, Table 1(Na)	-	7000	-
4.2, 4.3, 4.4, Table 1(Cl)	-	7000	-
4.2, 4.3, 4.4, Table 1(Sulphate (as SO4 ))	-	7000	-
4.2, 4.3, 4.4, Table 1(Phosphate (PO4 ))	-	7000	-
4.5(Additional Requirement for Technical Grade Boric Acid)	-	7000	-
4.3 - Table 1 - Sl No - xi(Phosphate (PO4) - Annex A 12 )	-	7000	-
4.3 - Table 1 - Sl No - x(Sulphate (as SO4) - Annex A 11)	-	7000	-
4.3 - Table 1 - Sl No - ix(Chloride (Cl) - Annex A 10)	-	7000	-
4.3 - Table 1 - Sl No - viii(Sodium (as Na) - Annex A 9)	-	7000	-
4.3 - Table 1 - Sl No - vii(Arsenic (as As) - Annex A 8)	-	7000	-
4.3 - Table 1 - Sl No - vi(Calcium (as Ca) - Annex A 7)	-	7000	-
4.3 - Table 1 - Sl No - v( Iron (as Fe) - Annex A 6)	-	7000	-
4.3 - Table 1 - Sl No - iv(Heavy metals (as Pb) - Annex A 5)	-	7000	-
4.3 - Table 1 - Sl No - iii(Water insoluble matter - Annex A 4)	-	7000	-
4.3 - Table 1 - Sl No - ii( Moisture - Annex A 3)	-	7000	-
4.3 - Table 1 - Sl No - i( Boric acid (as H3BO3) - Annex A 2)	-	7000	-
4.2 ( Description)	-	7000	-
4.6(Boric Acid for Use in Explosives)	-	7000	-

-
-

IS 17037 (2018)

Anti riot shoes - Specification

ALL

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuosness test IS 17011)	-	50000	-
4.16.2(Breaking load & lag retention)	-	50000	-
4.16.1(Length of laces )	-	50000	-
4.15(D-ring and Hooks )	-	50000	-
4.14.10(Resistance to fuel oil)	-	50000	-
4.14.9(Resistance to hot contact)	-	50000	-
4.14.8(Flex resistance)	-	50000	-
4.14.7(Abrasion resistance)	-	50000	-
4.14.6(Tear Strength)	-	50000	-
4.14.5(Ageing test)	-	50000	-
4.14.4(Hardness (IRHD))	-	50000	-
4.14.3(Density )	-	50000	-
4.14.2(Thickness )	-	50000	-
4.14.1(Meterial)	-	50000	-
4.13(Breaking Strength of thread)	-	50000	-
4.12.2(Tear Strength)	-	50000	-
4.12.1(Thickness )	-	50000	-
4.11.2(Tear Strength)	-	50000	-
4.11.1(Thickness)	-	50000	-
4.10(Counter stiffener thickness)	-	50000	-
4.9.3(Water absorption & desorption )	-	50000	-
4.9.2(Abrasion resistance )	-	50000	-
4.9.1(Meterial)	-	50000	-
4.8.3(Water absorption & desorption )	-	50000	-
4.8.2(Abrasion resistance )	-	50000	-
4.8.1(Meterial)	-	50000	-
4.7.5(Water vapour permeability & coefficent )	-	50000	-
4.7.4(Abrasion resistance )	-	50000	-
4.7.3(Tear Strength)	-	50000	-
4.7.1(Meterial)	-	50000	-
4.6.4(Water penetration and water absorption)	-	50000	-
4.6.3(Water vapour permeability & coefficent )	-	50000	-
4.6.2(Tear Strength)	-	50000	-
4.6.1(Thickness )	-	50000	-
4.5.11(Water resistance machine method)	-	50000	-
4.5.11(Water Resistance Tray method )	-	0	-
4.5.11(Thickness Toe puff & counter stiffener)	-	50000	-
4.5.10(Energy absorption of seat region )	-	50000	-
4.5.9(Cold insulation of sole complex)	-	50000	-
4.5.8(Heat insulation of sole complex)	-	50000	-
4.5.7.1(Antistatic test)	-	50000	-
4.5.6.4(Compression resistance)	-	50000	-
4.5.6.3(Impact resistance )	-	50000	-
4.5.6.2(Internal Toe cap length)	-	50000	-
4.5.6.1(General)	-	50000	-
4.5.5.4(Ageing test)	-	50000	-
4.5.5.2(Flex resistance )	-	50000	-
4.5.5.1(Dimension)	-	50000	-
4.5.4(Slip Resitance)	-	50000	-
4.5.3.2(Interayer bond strength)	-	50000	-
4.5.3.1(Upper/outsole bond strength)	-	50000	-
4.5.2(Ergonomic Feature)	-	50000	-
4.5.1(Contruction)	-	50000	-
4.4(Height of upper )	-	50000	-
4.3.2(Weight)	-	50000	-
4.3.1(Size)	-	50000	-
4.2(Design )	-	50000	-
4.1(General)	-	50000	-
4.5.3(Bond strength)	-	50000	-
4.9(Insocks)	-	50000	-
5(Chemical Requirements)	-	0	-
6.1(Scale of Sampling)	-	50000	-
6.2(Methods of Selecting Footwear)	-	50000	-
6.3.1(Visual and Tactile Examination)	-	50000	-
6.3.2(Dimensional Characteristics)	-	50000	-
6.3.3.1(Tests for physical requirements)	-	50000	-
6.3.3.2(Tests for chemical requirements)	-	50000	-
7(Marking)	-	50000	-
4.4, Table 2(Shoe size)	-	50000	-
4.4, Table 2(Height)	-	50000	-
6.1.3, Table 3(Scale of Sampling and Permissible Number of Defectives for Tests on Whole Footwear)	-	50000	-
Cl-4.7.2(Counter and Tongue Lining)	-	50000	-
Cl-5 (IS - 17011,Table - 1(i)(Allergenic and carcinogenic disperse dyes)	-	50000	-
Cl-5 (IS - 17011,Table - 1(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	50000	-
Cl-5 (IS - 17011,Table - 1(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	50000	-
Cl-5 (IS - 17011,Table - 1(iv)(Chromium (VI))	-	50000	-
Cl-5 (IS - 17011,Table - 1(v)(Dimethyl fumarate (DMFU))	-	50000	-
Cl-5 (IS - 17011,Table - 1(vi)(Formaldehyde (free or released by partial hydrolysis))	-	50000	-
Cl-5 (IS - 17011,Table - 1(vii)(Formaldehyde)	-	50000	-
Cl-5 (IS - 17011,Table - 1(viii)(Organotin compounds)	-	50000	-
Cl-5 (IS - 17011,Table - 1(ix)(PCP-TeCP-TriCP polychlorophenols)	-	50000	-
Cl-5 (IS - 17011,Table - 1(x)(pH)	-	50000	-
Cl-5 (IS - 17011,Table - 1(xi)(Phthalates (each individual phthalate))	-	50000	-
Cl-5 (IS - 17011,Table - 1(xii)(Nickel, on skin contact)	-	50000	-
4.5.5.3(Nail penetraion Insert )	-	50000	-

-
-

IS 17508 (2020)

Disposable Adult Incontinence Diaper - Specification

ALL

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no. 3(Material)	-	17000	-
Clause no. 3.1(Top Cover / Top Sheet)	-	17000	-
Clause no. 3.2(Absorbent Core)	-	17000	-
Clause no. 3.3(Outer Protective Barrier or Back Sheet)	-	17000	-
Clause no. 4(Fastening & Securing Mechanism)	-	17000	-
Clause no. 5(Manufacture, Workmanship and Finish)	-	17000	-
Clause no.6(Type and Size: FOR X LARGE)	-	17000	-
Clause no.6(Diaper Length)	-	17000	-
Clause no.6(Diaper Width)	-	17000	-
Clause no.6(Diaper Crotch)	-	17000	-
Clause no.6(Absorbent Core Length)	-	17000	-
Clause no.6(Absorbent Core Width Back)	-	17000	-
Clause no.6(Absorbent Core Width Front)	-	17000	-
Clause no.6(Core Crotch Width)	-	17000	-
Clause no.7.1(pH Value)	-	17000	-
Clause no.7.2 Table-2(Rate of Absorption (All Sizes))	-	17000	-
Clause no.7.2 Table-2(Rewet under Load (All Sizes))	-	17000	-
7.2, Table 2("Minimum absorption capacity (ml) for Small")	-	17000	-
Clause no.7.3(Hygiene Testing Requirement, Total Viable Count)	-	17000	-
Clause no.7.3.2(Hygiene Testing Requirement, Staphylococcus Aureus)	-	17000	-
Cl-7.7 (Amendment No-1)(Phthalate Test (Combined))	-	17000	-
6(Type and Size)	-	17000	-
7.1(pH Test)	-	17000	-
Cl-7.7 (Amendment No-1)(Phthalate test- Di-iso-butyl phthalate (DIBP))	-	17000	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Di-n-butyl phthalate (DBP))	-	17000	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Benzylbutyl Phthalate (BBP))	-	17000	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Bis-(2-ethylhexyl) phthalate (DEHP))	-	17000	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Di-n-octyl phthalate (DNOP))	-	17000	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Di-iso-nonylphthalate (DINP))	-	17000	-
Cl-7.7 (Amendment No-1)(Phthalate Test- Di-iso-decyl phthalate (DIDP))	-	17000	-
Clause no.7.2 Table-2(Minimum Absorption Capacity (ml))	-	17000	-
Clause no.7.4(Biocompatibility Evaluation- Cytotoxicity)	-	0	-
Clause no. 7.4(Biocompatibility Evaluation- Irritation)	-	0	-
Clause no.7.4(Biocompatibility Evaluation- Skin Sensitization)	-	0	-
Clause no.7.5(Biodegradability and Compostability (optional))	-	0	-
Clause no.7.6(Anti-Bacterial Activity Value (optional))	-	0	-
9(Marking)	-	17000	-
7.2, Table 2("Rate of absorption (s), Max for all sizes")	-	17000	-
7.2, Table 2("Rewet under load, (gm), Max for all sizes")	-	17000	-
7.2, Table 2("Minimum absorption capacity (ml) for medium")	-	17000	-
7.2, Table 2("Minimum absorption capacity (ml) for Large")	-	17000	-
7.2, Table 2("Minimum absorption capacity (ml) for X large")	-	17000	-

-
-

IS 3735 (1996)

Canvas Shoes, Rubber Sole

ALL

14800 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	14800	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	14800	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	14800	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	14800	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	14800	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	14800	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	14800	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	14800	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	14800	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	14800	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	14800	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	14800	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	14800	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	14800	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	14800	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	14800	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	14800	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	14800	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	14800	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	14800	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	14800	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	14800	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	14800	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	14800	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	14800	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	14800	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	14800	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	14800	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	14800	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	14800	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	14800	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	14800	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	14800	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	14800	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	14800	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	14800	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	14800	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	14800	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	14800	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	14800	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	14800	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	14800	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	14800	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	14800	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	14800	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	14800	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	14800	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	14800	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	14800	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	14800	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	14800	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	14800	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	14800	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	14800	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	14800	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	14800	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	14800	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	14800	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	14800	-
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	14800	-
4.1.1 Upper, Sl No. (i) of Table 1(The upper shall consist of over layer of cotton, manmade or blended conforming' to the requirements given in Sl No. (i) of Table 1 as an overlayer and cotton drill conforming to the requirements given in Sl No. (ii) of Table 1, as an inner layer or lining. The two fabrics shall be firmly adhered together with rubber compound. )	-	14800	-
Cl.4.1.1.1 Colour fastness(The dyed fabrics prescribed in 4.1.1 shall be fast todaylight and mechanical washing. Fastness to daylight shall be of rating 4 or better, when tested in accordance with IS 686 : 1985 or IS 2454: 1985. However in case of dispute the method prescribed in IS 686 : 1985 shall be considered as referee method.)	-	14800	-
Cl.4.1.2 Binding Material(IS 1954 : 1990) (IS1969 : 1985)(Cotton tape NEWAR used as binding material shall conform to the requirements prescribed in col 3 of Table 2, when tested in accordance with the methods referred to in col 4 of the table.)	-	14800	-
Cl.4.1.2.1 Anmex B.(Cotton, manmade or blended shall be used as binding material.' 'Coloured cotton tapes shall have fastness to day light of rating as and if agreed to between the purchaser and the supplier when tested in accordance with IS 686 : 1985. The black tapes shall be free from sulphur dyes when tested in accordance with Annex B.')	-	14800	-
Cl.4.1.3.1( Sewing thread cotton, manmade or blended shall be used for stitching of upper. For cotton variety thread shall conform to variety No. 28 of IS 1720. Polyester variety thread shall conform to variety No. 9 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification. Sewing thread cotton, manmade or blended shall be used for binding of upper. For cotton variety thread shall conform to variety No. 32 of IS 1720. Polyester variety thread shall conform to variety No. 5 of IS 9543. Any other suitable thread shall have breaking load not less than above referred requirement of specification.')	-	14800	-
Cl.4.1.3.2 (IS 2454 : 1985) IS 765 : 1979 IS 971 : 1966( The colour of the threads shall be as agreedto between the purchaser and the supplier. The dyed threads shall conform to the following requirements or IS 686 : 1985'.)	-	14800	-
Cl.4.1.4(.Brass, steel or aluminium eyelets of 7.5 mm diameter and wall thickness 0.30 to 0.35 mm shall be used.')	-	14800	-
Cl.4.1.5 Laces( The shoes shall be provided with fabric braided laces either matching the shade of the upper or black or The length of the lace shall be 60 ± 3 cm )	-	14800	-
Cl.4.1.5 Laces(and shallhave the breaking strength of not less than 250 N when tested between 18 cm grips in accordance with IS 1969 : 1985, the rate of traverse of power actuated grip being 300 mm/min.)	-	14800	-
Cl.4.1.5 Laces Annex B(In case the laces are black, the same shall pass the test for freedom from sulpher dyes when tested in accordance with Annex B. The two ends of the lace shall be provided with suitable metal or plastic tips.)	-	14800	-
Cl.4.1.6 Rubber Components(The rubber components shall conform to the requirements given in Table 4, when tested from finished boots.However in case it is not possible to cut the test pieces from the made up boots then 4.1.5.3 of IS 13695 : 1993 shall be followed.')	-	14800	-
Cl.4.1.6.2 Ageing col 4 of Table 5.(The shoes shall be also aged at 70 ± 1°C for 168 h, on completion of which the test pieces taken from the shoes shall conform to the physical requirements prescribed in col 4 of Table 5. )	-	14800	-
Cl.4.1.6.2 Ageing (None of the rubber components of the shoes shall show any sign of tackiness or crack developed after ageing, when examined visually)	-	14800	-
Cl.4.1.6.3 Thickness of components in Table 6.(Individual components of the shoes shall comply with the thickness and material requirements prescribed in Table 6.)	-	14800	-
CL.4.2 Shape and Design IS 1638 : 1969(Cl 4.2.1 The shoes shall be made according to design and pattern as agreed to between the purchaser and the supplier. Size and fittings of the shoes shall be in accordance with IS 1638 : 1969 unless otherwise specified by the purchaser.)	-	14800	-
Cl.4.2.2( The recommended design of canvas shoes is shown in Fig. 1.)	-	14800	-
Cl.4.3 Construction Cl 4.3.1( The upper shall be stitched on a lock stitch machine and the number of stitches shall be 30 to 40 per dm.)	-	14800	-
Cl.'4.3.2( Back of the upper shall be reinforced with a strip of upper material when there is a seam.')	-	14800	-
Cl.4.5 Consolidation Test IS 3400 (Part 5) : 1986 (From the quarter, cut a strip of 25.0 ± 0.5 mm width along the leagth of the boot and of sufficient length to permit separation over a length of 75 mm. Carry out the test on two test pieces (one from each odd) at the rate of traverse of 100± 10mm per minute in accordance with IS 3400 (Part 5): 1986 or Static Dead Load Method as given in Annex C. The individual adhesion value for consolidation test shall not be less than 30N (3.0 kgf) for each of the teat piecea (see Note under 4.4).')	-	14800	-
Cl.4.3.3( The counter shall be stitched at the back, set from bottom of lining and bound flat on top edge with white/scoured binding material cut in bias and formed as a tape. T )	-	14800	-
Cl.4.3.3(he number of stitches shall be 30 to 40 per decimetre. The counter binding shall meet the binding of the upper at the centre top edge of the heel.)	-	14800	-
Cl.4.3.3(The edges of quarter shall be bound with dyed cotton binding material or matching to the colour of the upper, cut in bias and formed as a tape.)	-	14800	-
Cl.4.3.4 (The vantp shall be strengthened with a rubber toe-cap (see Fig. 1).)	-	14800	-
Cl.4.3.5( Five pairs of eyelets shall be fitted in each shoe. The eyelets shall be properly clenched without any distortion. It shall properly match the colour of the upper canvas, or as agreed to between the purchaser and the supplier.)	-	14800	-
Cl.4.3.6( The shoes shall be free from folds, wrinkles in the upper, blisters, embedded foreign matters and excessive surface markings. In appearance, general workmanship, finish and all other respects, not defined in the standard, the shoes shall be similar to the sample approved by the purchaser, if any)	-	14800	-
CL.4.3.7( The soles shall be of even substance and ofone layer only.)	-	14800	-
Cl.4.3.8( A rubber foxing shall be fixed all round the sole and heel. The colour shall be as agreed to between the purchaser and the supplier. )	-	14800	-
Cl.4.3.8(The foxing, not less than 18 mm wide, shall not extend beyond the edges of the sole at the bottom)	-	14800	-
Cl.4.4 Adhesion Test(From the upper-foxing portion where it is adhered to the canvas, parallel to the waist of sole, cut a strip of length 100 mm and width 8 mm. Separate out the plies initially by breaking the bond to a length of about 75 mm. Carry out the test on two specimens in accordance with IS 3400 (Part 5) : 1986. There shall be no further separation within 1 minute at a load of 1 kg for each of the two specimens.)	-	14800	-
CL.4.6 Mass(The mass of one pair of finished shoes of size 8 shall not exceed 750 g with an increase or decrease of 25 g for each bigger or smaller size respectively)	-	14800	-
4.8(Adhesion )	-	14800	-
4.7(Consolidation test )	-	14800	-
4.6(Mass )	-	14800	-
4.5(Finish )	-	14800	-
4.4(Contruction )	-	14800	-
4.3(Leg Height )	-	14800	-
4.2(Design )	-	14800	-
4.1.6.2(Thickness of components )	-	14800	-
4.1.6.2(Ageing)	-	14800	-
4.1.6.2(Elongation at break after ageing )	-	14800	-
4.1.6.2(Tensile after ageing )	-	14800	-
4.1.6(Compression set )	-	14800	-
4.1.6(Elongation at break )	-	14800	-
4.1.6(Tensile strength)	-	14800	-
4.1.6(Hardness (after accelerated ))	-	14800	-
4.1.6(Flexing resistance test)	-	14800	-
4.1.6(Hardness )	-	14800	-
4.1.6(Relative density)	-	14800	-
4.1.5(Sulpher dyes content )	-	14800	-
4.1.5(Breaking Load )	-	14800	-
4.1.5(Length )	-	14800	-
4.1.4(Thickness)	-	14800	-
4.1.4(Size )	-	14800	-
4.1.3(Color fastness to perspiration)	-	14800	-
4.1.3(Colorfastness to washing)	-	14800	-
4.1.3(Colorfastness to light )	-	14800	-
4.1.3(Single thread breaking load)	-	14800	-
4.1.3(Construction )	-	14800	-
4.1.2(Colorfastness to light )	-	14800	-
4.1.2(Colorfastness to washing)	-	14800	-
4.1.2(Breaking Strength )	-	14800	-
4.1.2(Width )	-	14800	-
4.1.1.2(Colorfastness to washing)	-	14800	-
4.1.1.1(Colorfastness to light )	-	14800	-
4.1.1 (Drill) (End & Picks/dm)	-	14800	-
4.1.1 (Drill) (Colorfastness to light )	-	14800	-
4.1.1 (canvas )(End & Picks/dm)	-	14800	-
4.1.1 (canvas )(Breaking Load )	-	14800	-
5, 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking)	-	14800	-
" CL. 5.1, Cl. 5.2, Cl. 5.2.1, Cl. 5.2.1.1(Packing and marking ")	-	14800	-
Cl.4.1 (Table B-3 Sl I)(Allergenic and Carcinogenic Disperse Dyes)	-	14800	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	14800	-

-
-

IS 15844 : Part 2 (2023)

SPORTS FOOTWEAR PART -2 PERFORMANCE SPORTS FOOTWEAR

ALL

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(SAMPLING AND CONDITIONING)	-	50000	-
5(DESIGN)	-	50000	-
6(SIZE AND FITTINGS)	-	50000	-
7.1.1(Whole Footwear)	-	50000	-
7.1.2(Upper to Mid Sole/Out Sole Bond Performance)	-	50000	-
7.1.3("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	50000	-
7.1.4(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	50000	-
7.1.5(Energy Absorption at Seat Region)	-	50000	-
7.1.6(Complete Shoe Flexing)	-	50000	-
7.1.7(Washability)	-	50000	-
7.1.8(Slip Resistance)	-	50000	-
7.1.9(Heel Drop)	-	50000	-
7.2 , Table No. 2 , i)(Flexing resistance)	-	50000	-
7.2 , Table No. 2 , ii)(Tear strength (average force))	-	50000	-
7.2 , Table No. 2 , iii)("Colour fastness rubbing (To and fro) Grey scale rate Dry: (rubbing) Rating: (Marring and staining) ")	-	50000	-
7.2 , Table No. 2 , iv) ,a)(Water vapour permeability)	-	50000	-
7.2 , Table No. 2 , iv) ,b)(Water vapour coefficient)	-	50000	-
7.2 , Table No. 2 , v)(Stitch tear strength (double hole))	-	50000	-
7.2 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Rating: (Marring)")	-	50000	-
7.2 , Table No. 2 , vii)(Tensile strength)	-	50000	-
7.2 , Table No. 2 , viii)(Elongation at break,)	-	50000	-
7.2 , Table No. 2 , ix)("Water penetration and water absorption after 60 Minutes Water absorption %, Max Water penetration Gms, Max")	-	50000	-
7.2 , Table No. 2 , x)(Abrasion test (for unlined upper))	-	50000	-
7.2 , Table No. 3 , i)(Breaking strength "As per Method 1 of IS 7016 (Part 2)/ ISO 1421 : 2016 or ISO 17706")	-	50000	-
7.2 , Table No. 3 , ii)(Elongation at break)	-	50000	-
7.2 , Table No. 3 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	50000	-
7.2 , Table No. 3 , iv)(Strength at needle perforation)	-	50000	-
7.2 , Table No. 3 , v)("Flexing resistance, no crack/damage to coating/ lamination / upper material till prescribed cycles")	-	50000	-
7.2 , Table No. 3 , vi) , a)(Water vapour permeability,)	-	50000	-
7.2 , Table No. 3 , vi) , b)("Water vapour coefficient, ")	-	50000	-
7.2 , Table No. 3 , vii)(Hydrolysis resistance)	-	50000	-
7.2 , Table No. 3 , viii)(Colour fastness to light grey scale rate)	-	50000	-
7.2 , Table No. 3 , ix)(Bursting Strength,)	-	50000	-
7.3 , Table No. 4 , i)(Tear strength,)	-	50000	-
7.3 , Table No. 4 , ii)(Abrasion resistance, cycles)	-	50000	-
7.3 , Table No. 4 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, ")	-	50000	-
7.3 , Table No. 4 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, ")	-	50000	-
7.3 , Table No. 4 , v) , a)(Water vapour permeability,)	-	50000	-
7.3 , Table No. 4 , v) , b)("Water vapour coefficient, " As per IS 15298 (Part 1))	-	50000	-
7.4 , Table No. 5 , i)(Thickness)	-	50000	-
7.4 , Table No. 5 , ii)(Flexing index)	-	50000	-
7.4 , Table No. 5 , iii)(Abrasion resistance, at 400 cycles)	-	50000	-
7.4 , Table No. 5 , iv) , a)(Water Absorption,)	-	50000	-
7.4 , Table No. 5 , iv) , b)(Water Desorption)	-	50000	-
7.5 , Table No. 6 , i)(Thickness)	-	50000	-
7.5 , Table No. 6 , ii)(Abrasion resistance, cycles As per IS 15298 (Part 1))	-	50000	-
7.5 , Table No. 6 , iii) , a)(Water Absorption)	-	50000	-
7.5 , Table No. 6 , iii) , b)(Water Desorption)	-	50000	-
7.5 , Table No. 6 , iv)(Heat resistance shrinkage linear)	-	50000	-
7.6 , Table No. 7 , i)(Abrasion resistance (volume loss))	-	50000	-
7.6 , Table No. 7 , ii)(Flexing resistance)	-	50000	-
7.6 , Table No. 7 , iii)(Hydrolysis resistance, cut growth after 1 50 000 flexes)	-	50000	-
7.6 , Table No. 7 , iv)(Tear strength)	-	50000	-
7.6 , Table No. 7 , v)(Tensile strength)	-	50000	-
7.6 , Table No. 7 , vi)(Elongation at break)	-	50000	-
7.6 , Table No. 7 , vii)(Compression set)	-	50000	-
7.7 , Table No. 8 , i)(Compression set)	-	50000	-
7.7 , Table No. 8 , ii)(Split tear strength,)	-	50000	-
7.7 , Table No. 8 , iii)(Heat shrinkage,)	-	50000	-
7.7 , Table No. 8 , iv)(Elongation at break,)	-	50000	-
7.8 , Table No. 9 , i)(First dry collapsing load, hardness)	-	50000	-
7.8 , Table No. 9 , ii)(Resilience)	-	50000	-
7.8 , Table No. 9 , iii)(Moisture resistance)	-	50000	-
7.8 , Table No. 9 , iv) , a)(Initial dry area shape retention)	-	50000	-
7.8 , Table No. 9 , iv) , b)(Area shape retention after 10th collapse, dry)	-	50000	-
7.8 , Table No. 9 , v)(Peel strength)	-	50000	-
7.9 , Table No. 10 , i)(Peel strength)	-	50000	-
7.9 , Table No. 10 , ii)(Shear strength)	-	50000	-
7.10 , Table No. 11 , i)(Limit of useful extension,)	-	50000	-
7.10 , Table No. 11 , ii)(Needle strength,)	-	50000	-
7.11 , Table No. 12 , i)(Breaking strength of lace,)	-	50000	-
7.11 , Table No. 12 , ii)(Lace tag strength,)	-	50000	-
7.11 , Table No. 12 , iii)(Lace to lace abrasion,)	-	50000	-
7.11 , Table No. 12 , iv)("Colour fastness to water Gray Scale Rate")	-	50000	-
7.11 , Table No. 12 , v)(Strength of Buckle/Ski hook)	-	50000	-
7.11 , Table No. 12 , vi)(Corrosion resistance)	-	50000	-
7.12("Chemical Requirement on Complete Product for All Types of Sports Shoe")	-	50000	-
8(MARKING AND PACKING)	-	50000	-
7.12, Table no. 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	50000	-
7.12, Table no. 1 of IS 17011,(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	50000	-
7.12, Table no. 1 of IS 17011,(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	50000	-
7.12, Table no. 1 of IS 17011,(iv)(Chromium (VI))	-	50000	-
7.12, Table no. 1 of IS 17011,(v)(Dimethyl fumarate (DMFU))	-	50000	-
7.12, Table no. 1 of IS 17011,(vi)(Formaldehyde (free or released by partial hydrolysis))	-	50000	-
7.12, Table no. 1 of IS 17011,(vii)(Formaldehyde)	-	50000	-
7.12, Table no. 1 of IS 17011,(viii)(Organotin compounds)	-	50000	-
7.12, Table no. 1 of IS 17011,(ix)(PCP-TeCP-TriCP polychlorophenols)	-	50000	-
7.12, Table no. 1 of IS 17011,(x)(pH)	-	50000	-
7.12, Table no. 1 of IS 17011,(xi)(Phthalates (each individual phthalate))	-	50000	-
7.12, Table no. 1 of IS 17011,(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	50000	-
7.12.2 (Amendment 1)(Lead content)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	50000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	50000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	50000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	50000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	50000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	50000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	50000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	50000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	50000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	50000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	50000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	50000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	50000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	50000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	50000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	50000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	50000	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	50000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	50000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	50000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	50000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	50000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	50000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	50000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	50000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	50000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	50000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	50000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	50000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	50000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	50000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	50000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	50000	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	50000	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	50000	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	50000	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	50000	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	50000	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	50000	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	50000	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	50000	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	50000	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	50000	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	50000	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	50000	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	50000	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	50000	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	50000	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	50000	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	50000	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	50000	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	50000	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	50000	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	50000	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	50000	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	50000	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	50000	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	50000	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	50000	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	50000	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	50000	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	50000	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	50000	-

-
-

IS 15298 : Part 2 (2024)

Personal Protective Equipment Part 2 Safety Footwear (ISO 20345 : 2021, MOD) (Third Revision)

ALL

52000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 7, Table 20("Marking ")	-	52000	-
Cl 5.2.2, Table 4(" Height of upper ")	-	52000	-
Cl 5.2.3(Heel area)	-	52000	-
Cl 5.3.1.1(Construction of whole footwear)	-	52000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	52000	-
Cl 5.3.2.1(Toe protection - general)	-	52000	-
Cl 5.3.2.2(Internal length)	-	52000	-
Cl 5.3.2.3(Width of toecap flange)	-	52000	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	52000	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	52000	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	52000	-
Cl 5.3.2.6(Impact resistance)	-	52000	-
Cl 5.3.2.7(Compression resistance)	-	52000	-
Cl 5.3.3(Leak proofness)	-	52000	-
Cl 5.3.4("Specific ergonomic features ")	-	52000	-
Cl 5.3.5.2, Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	52000	-
Cl 5.3.6, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	52000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	52000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	52000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	52000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	52000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	52000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	52000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	52000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	52000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	52000	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	52000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	52000	-
Cl 5.3.7(Seam strength)	-	52000	-
Cl 5.3.8(Lead Content ( National Annex A))	-	52000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	52000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	52000	-
Cl 5.4.2(Thickness)	-	52000	-
Cl 5.4.3(Tear strength)	-	52000	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	52000	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	52000	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	52000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	52000	-
Cl 5.4.5(Flexing resistance)	-	52000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	52000	-
Cl 5.4.7(Resistance to hydrolysis)	-	52000	-
Cl 5.5.2(Lining- Tear strength)	-	52000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	52000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	52000	-
Cl 5.6.2, Table 14(Tear strength of tongue)	-	52000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	52000	-
Cl 5.7.2(Water permeability of insock)	-	52000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	52000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	52000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	52000	-
Cl 5.8.2.1, Table 15(Thickness of Outsole)	-	52000	-
Cl 5.8.2.2(Cleated area)	-	52000	-
Cl 5.8.2.3(Cleat height)	-	52000	-
Cl 5.8.3(Outsole- Tear strength)	-	52000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	52000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	52000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	52000	-
Cl 5.8.7(Interlayer bond strength)	-	52000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	52000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	52000	-
Personal protective equipment: Part 2 safety footwear(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	52000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	52000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	52000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	52000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	52000	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	52000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	52000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	52000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	52000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	52000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	52000	-
Cl 6.2.4(Energy absorption of seat region)	-	52000	-
Cl 6.2.5(Water resistance)	-	52000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	52000	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	52000	-
Cl 6.2.7(Ankle protection)	-	52000	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	52000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	52000	-
Cl 6.2.8.3(Resistance to cutting)	-	52000	-
Cl 6.2.9(Scuff cap)	-	52000	-
Cl 6.2.10 , Table 19("Slip resistance on ceramic tile floor with glycerine ")	-	52000	-
Cl 6.3(Upper — Water penetration and absorption)	-	52000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	52000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	52000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	52000	-
Cl 6.4.3.2(Design of Ladder grip)	-	52000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	52000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	52000	-

-
-

IS 14544 (2022)

LEATHER SAFETY AND PROTECTIVE FOOTWEAR WITH DIRECT MOULDED POLYVINYL CHLORIDE PVC SOLE - SPECIFICATION First Revision

ALL

58000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Cl. No. 5.10 of IC 15298(P-1):2015)	-	58000	-
8.2(Cl. No. 5.10 of IC 15298(P-1):2015)	-	58000	-
Cl-6.2(Design)	-	58000	-
Cl-6.3(Size and Fitting)	-	58000	-
Cl-6.4(Height of Upper)	-	58000	-
Cl-6.5.1(Whole Footwear-Construction)	-	58000	-
Cl-6.5.2(Whole Footwear-Ergonomic Feature)	-	58000	-
Cl-6.5.3(Whole Footwear-Upper – Outsole Bond Strength)	-	58000	-
Cl-6.5.4(Whole Footwear- Slip Resistance)	-	58000	-
Cl-6.5.5(Whole Footwear- Resistance to Fuel Oil)	-	58000	-
Cl-6.5.6(Whole Footwear- Impact Resistance)	-	58000	-
Cl-6.5.7(Whole Footwear- Compression Resistance)	-	58000	-
Cl-6.5.8(Whole Footwear- Resistance to Corrosion)	-	58000	-
Cl-6.6.2(Upper- Material)	-	58000	-
Cl-6.6.3(Upper-Tear Strength)	-	58000	-
Cl-6.6.4(Upper- Tensile strength)	-	58000	-
Cl-6.6.5(Upper- Water Vapour Permeability and Coefficient)	-	58000	-
Cl-6.7.1(Vamp and quarter lining-Material)	-	58000	-
Cl-6.7.2(Vamp and quarter lining-Tear strength)	-	58000	-
Cl-6.7.3(Vamp and quarter lining-Abrasion resistance)	-	58000	-
Cl-6.7.4(Vamp and quarter lining-Water vapour permeability and coefficient)	-	58000	-
Cl-6.8(Toecaps -Whole toecap)	-	58000	-
Cl-6.9.1(Insole- Material)	-	58000	-
Cl-6.9.2(Insole-Thickness)	-	58000	-
Cl-6.9.3(Insole- Abrasion resistance)	-	58000	-
Cl-6.9.4(Insole- Water absorption and desorption)	-	58000	-
Cl-6.10(Insocks-Thickness)	-	58000	-
Cl-6.10.1(Insocks-Material)	-	58000	-
Cl-6.10.2(Insocks-Abrasion resistance)	-	58000	-
Cl-6.10.3(Insocks-Water absorption and desorption)	-	58000	-
Cl-6.11(Stiffener)	-	58000	-
Cl-6.12(Tongue -Material)	-	58000	-
Cl-6.13(Closing thread-- Properties)	-	58000	-
Cl-6.14.1(Outsole-Material)	-	58000	-
Cl-6.14.2, 6.14.3 & 6.14.4(Outsole-Thickness, cleat area and cleat height)	-	58000	-
Cl-6.14.5(Outsole-Tear strength)	-	58000	-
Cl-6.14.6(Outsole-Abrasion resistance)	-	58000	-
Cl-6.14.7(Outsole-Flexing resistance)	-	58000	-
Cl-6.14.8(Outsole-Interlayer bond strength)	-	58000	-
Cl-6.15.1(Laces-Material)	-	58000	-
Cl-6.15.2(Laces-Colour Fastness)	-	58000	-
Cl-6.15.3(Laces-Abrasion Resistance)	-	58000	-
Cl-6.15.4(Laces-Breaking load)	-	58000	-
Cl-7.1, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	58000	-
Cl-7.2(PVC outsole)	-	58000	-
Cl-8.3(Cold insulation of Sole)	-	58000	-
Cl-8.4(Heat insulation of Sole)	-	58000	-
Cl-10(Marking)	-	58000	-
cL-7.1, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	58000	-
Cl-7.1 Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	58000	-
Cl-7.1, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	58000	-
Cl-7.1, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	58000	-
Cl-7.1, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	58000	-
Cl-7.1, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	58000	-
Cl-7.1, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	58000	-
Cl-7.1, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	58000	-
Cl-7.1, Table no 1 of IS 17011 (x)(pH)	-	58000	-
Cl-7.1, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	58000	-
Cl-7.1, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	58000	-

-
-

IS 3976 (2018)

Safety Rubber Canvas Boots for Miners Ã¢â‚¬ Specification ( Sixth Revision )

ALL

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	45000	-
Cl.6.3 Tear Strength of Compact Outsole( When outsoles are tested in accordance to 8.2 of IS 15298 (Part 1), the tear strength shall be not less than 8 kN/m for material having density higher than 0.9/cm³ and when density of material is less than or equal to 0.9 g/cm³, tear strength shall not be less than 5 kN/m.)	-	45000	-
Cl.5.2.3 Coated Binding Material IS 1954( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-	45000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	45000	-
Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method prescribed in 5.14 of IS 15298 (Part 1), the energy absorption of the seat region shall not be less than 20 J.)	-	45000	-
Cl.5.2.3 Coated Binding Material Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) )	-	45000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	45000	-
CL.5.2.10 Counter Stiffener( A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having thickness not less than 1.5 mm is to be stitched at inside of upper so as to fortify the back of the footwear at joints of quarter.)	-	45000	-
Cl.5.1.1 Fittings(Fittings of the footwear shall be in conformity to Table 9 of IS 1638 (measurement of men’s lasts) and Table 8 of IS 1638 (measurement of women’s lasts).)	-	45000	-
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-	45000	-
Cl.5.2.1.2( Composite upper material shall comply with tear strength as per 5.4.3 of IS 15298 (Part 2).)	-	45000	-
Cl.5.2.1.3 , Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance with 6.5 of IS 15298 (Part 1).)	-	45000	-
Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).)	-	45000	-
Cl.5.2.2 Compact Insole/Compact Insocks/Counter Stiffener Lining(Textile material shall be used as lining material for compact insole/compact insocks / counter stiffener. It shall meet the requirement of tear strength as prescribed in 5.6.1 of IS 15298 (Part 2).)	-	45000	-
Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/ counter stiffener( When textiles used as lining for all the above are tested in accordance with 6.12 of IS 15298 (Part 1), the lining shall not develop any holes before the following number of cycles has been performed:)	-	45000	-
Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	45000	-
Cl.5.2.5 Compact Sole Heel Cl. 5.2.5.1 (The compact sole heel shall be made out of polymeric/rubber components and the typical design recommendation (not mandatory) of compact sole heel is as shown in Fig. 3. Sectional view of Type 1/Type 2 ) toe position is given in Fig. 4.)	-	45000	-
Cl.5.2.5 Compact Sole Heel 5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after accelerated ageing at 100 ± 2 °C for 24 h )	-	45000	-
Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when the outer sole heel is made of bi-polymer, the finished boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not develop any sign of tackiness or brittleness.)	-	45000	-
Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall comply with the thickness and material requirements prescribed in Table 3.)	-	45000	-
Cl.5.2.5.4 Thickness of compact sole hee(of black cotton thread, the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	45000	-
Cl.5.2.6 Thread for Upper Closing( The length (m/kg) and construction of sewing thread shall conform to requirements as prescribed in Table 4.)	-	45000	-
Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.)	-	45000	-
Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum 100 cm for Type 2.)	-	45000	-
Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be achieved when tested between 18 cm grip length in accordance with Annex C.)	-	45000	-
Cl.5.2.8.3( In case of cotton lace of black colour, the same shall be free from sulphur dyes when tested in accordance with Annex B. Two ends of the laces shall be provided with plastic tips.)	-	45000	-
Cl.5.2.9 Eyelets( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-	45000	-
Cl.5.3.2 (The tongue shall be made out of composite upper material and shall be half bellow type for Type 2 and full bellow type for Type 1.)	-	45000	-
Cl.5.3.5 Outer toe cap( shall be provided which is made of polymer/rubber and it shall be strongly adhered such that it shall not open up or come out while in use. Toe of the boot shall be reinforced with safety toe cap)	-	45000	-
Cl.5.3.6( A designed foxing of width of minimum 25 mm and of thickness of minimum 2 mm is to be provided. The foxing shall not extend the edges of the outer sole.)	-	45000	-
Cl.5.3.7( Two pairs of detachable insocks are to be provided. The insocks shall be compact in nature having thickness not less than 2 mm.)	-	45000	-
Cl.5.4 Finish( In appearance, general workmanship and in all other respects with regard to finish and get up of the footwear, the footwear shall be matching to the approved sample of the purchaser.)	-	45000	-
Cl.5.5 Mass(The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-	45000	-
Cl.5.6( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-	45000	-
Cl.5.7 Performance Test(When safety footwear is tested in accordance with the method described in 5.4 of IS 15298 (Part 1), at an impact energy of (200 ± 4) J, the clearance under the toecap at the moment of impact shall be in accordance with Table 5. In addition, the toecap shall not develop any cracks which go through the material, that is, through which light can be seen.)	-	45000	-
Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the method prescribed in 5.2 of IS 15298 (Part 1), the bond strength shall not be less than 4.0 N/mm, unless there is tearing of the sole in which case the bond strength shall not be less than 3.0 N/mm.)	-	45000	-
Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer( and Bi-density Sole When tested in accordance with 5.2 of IS 15298 (Part 1), the bond strength between the outer or cleated layer and the adjacent layer shall not be less than 4.0 N/mm unless there is tearing of any part of the sole, in which case the bond strength shall not be less than 3.0 N/mm.)	-	45000	-
Cl.5.10 Consolidation Test( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-	45000	-
Cl.5.11 Compression Resistance( 5.11.1 When safety boots are tested in accordance with 5.5 of IS 15298 (Part 1), the clearance under the toe cap at a compression load of 15 kN ± 0.1 kN shall be in accordance with Table 5.)	-	45000	-
Cl.5.12 Internal Length of Toe Cap( For safety boots, internal length of the toe cap shall meet the specification given in Table 5 of IS 15298 (Part 2) when tested as per 5.3 of IS 15298 (Part 1).)	-	45000	-
Cl.6.1 Abrasion Resistance of Compact Outsole( When outsole is tested in accordance with 8.3 of IS 15298 (Part 1), the relative volume loss shall not be greater than 250 mm³ for materials having density 0.9 g/cm³ or less, and not greater than 150 mm³ for materials with density greater than 0.9 g/cm³.)	-	45000	-
Cl.6.2 Flexing Resistance of Compact Outsole( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-	45000	-
Cl.6.4 Resistance to Hot Contact( — Sole Heel When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform and shall not develop any cracks when bent around the mandrel.)	-	45000	-
Cl.6.5 Hydrolysis( When bottom sole or other components are made out of polyurethane, the same shall be tested in accordance with 8.5 of IS 15298 (Part 1) and the same shall comply with 5.8.5 of IS 15298 (Part 2).)	-	45000	-
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	45000	-
Cl.6.3 Tear Strength of Compact Outsole( When outsoles are tested in accordance to 8.2 of IS 15298 (Part 1), the tear strength shall be not less than 8 kN/m for material having density higher than 0.9/cm³ and when density of material is less than or equal to 0.9 g/cm³, tear strength shall not be less than 5 kN/m.)	-	45000	-
Cl.5.2.3 Coated Binding Material IS 1954( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-	45000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	45000	-
Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method prescribed in 5.14 of IS 15298 (Part 1), the energy absorption of the seat region shall not be less than 20 J.)	-	45000	-
Cl.5.2.3 Coated Binding Material Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) )	-	45000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	45000	-
CL.5.2.10 Counter Stiffener( A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having thickness not less than 1.5 mm is to be stitched at inside of upper so as to fortify the back of the footwear at joints of quarter.)	-	45000	-
Cl.5.1.1 Fittings(Fittings of the footwear shall be in conformity to Table 9 of IS 1638 (measurement of men’s lasts) and Table 8 of IS 1638 (measurement of women’s lasts).)	-	45000	-
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-	445000	-
Cl.5.2.1.2( Composite upper material shall comply with tear strength as per 5.4.3 of IS 15298 (Part 2).)	-	45000	-
Cl.5.2.1.3 , Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance with 6.5 of IS 15298 (Part 1).)	-	45000	-
Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).)	-	45000	-
Cl.5.2.2 Compact Insole/Compact Insocks/Counter Stiffener Lining(Textile material shall be used as lining material for compact insole/compact insocks / counter stiffener. It shall meet the requirement of tear strength as prescribed in 5.6.1 of IS 15298 (Part 2).)	-	45000	-
Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/ counter stiffener( When textiles used as lining for all the above are tested in accordance with 6.12 of IS 15298 (Part 1), the lining shall not develop any holes before the following number of cycles has been performed:)	-	45000	-
Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	45000	-
Cl.5.2.5 Compact Sole Heel Cl. 5.2.5.1 (The compact sole heel shall be made out of polymeric/rubber components and the typical design recommendation (not mandatory) of compact sole heel is as shown in Fig. 3. Sectional view of Type 1/Type 2 ) toe position is given in Fig. 4.)	-	45000	-
Cl.5.2.5 Compact Sole Heel 5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after accelerated ageing at 100 ± 2 °C for 24 h )	-	45000	-
Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when the outer sole heel is made of bi-polymer, the finished boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not develop any sign of tackiness or brittleness.)	-	45000	-
Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall comply with the thickness and material requirements prescribed in Table 3.)	-	45000	-
Cl.5.2.5.4 Thickness of compact sole hee(of black cotton thread, the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	45000	-
Cl.5.2.6 Thread for Upper Closing( The length (m/kg) and construction of sewing thread shall conform to requirements as prescribed in Table 4.)	-	45000	-
Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.)	-	45000	-
Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum 100 cm for Type 2.)	-	45000	-
Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be achieved when tested between 18 cm grip length in accordance with Annex C.)	-	45000	-
Cl.5.2.8.3( In case of cotton lace of black colour, the same shall be free from sulphur dyes when tested in accordance with Annex B. Two ends of the laces shall be provided with plastic tips.)	-	45000	-
Cl.5.2.9 Eyelets( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-	45000	-
Cl.5.3.2 (The tongue shall be made out of composite upper material and shall be half bellow type for Type 2 and full bellow type for Type 1.)	-	45000	-
Cl.5.3.5 Outer toe cap( shall be provided which is made of polymer/rubber and it shall be strongly adhered such that it shall not open up or come out while in use. Toe of the boot shall be reinforced with safety toe cap)	-	45000	-
Cl.5.3.6( A designed foxing of width of minimum 25 mm and of thickness of minimum 2 mm is to be provided. The foxing shall not extend the edges of the outer sole.)	-	45000	-
Cl.5.3.7( Two pairs of detachable insocks are to be provided. The insocks shall be compact in nature having thickness not less than 2 mm.)	-	45000	-
Cl.5.4 Finish( In appearance, general workmanship and in all other respects with regard to finish and get up of the footwear, the footwear shall be matching to the approved sample of the purchaser.)	-	45000	-
Cl.5.5 Mass(The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-	45000	-
Cl.5.6( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-	45000	-
Cl.5.7 Performance Test(When safety footwear is tested in accordance with the method described in 5.4 of IS 15298 (Part 1), at an impact energy of (200 ± 4) J, the clearance under the toecap at the moment of impact shall be in accordance with Table 5. In addition, the toecap shall not develop any cracks which go through the material, that is, through which light can be seen.)	-	45000	-
Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the method prescribed in 5.2 of IS 15298 (Part 1), the bond strength shall not be less than 4.0 N/mm, unless there is tearing of the sole in which case the bond strength shall not be less than 3.0 N/mm.)	-	45000	-
Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer( and Bi-density Sole When tested in accordance with 5.2 of IS 15298 (Part 1), the bond strength between the outer or cleated layer and the adjacent layer shall not be less than 4.0 N/mm unless there is tearing of any part of the sole, in which case the bond strength shall not be less than 3.0 N/mm.)	-	45000	-
Cl.5.10 Consolidation Test( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-	45000	-
Cl.5.11 Compression Resistance( 5.11.1 When safety boots are tested in accordance with 5.5 of IS 15298 (Part 1), the clearance under the toe cap at a compression load of 15 kN ± 0.1 kN shall be in accordance with Table 5.)	-	45000	-
Cl.5.12 Internal Length of Toe Cap( For safety boots, internal length of the toe cap shall meet the specification given in Table 5 of IS 15298 (Part 2) when tested as per 5.3 of IS 15298 (Part 1).)	-	45000	-
Cl.6.1 Abrasion Resistance of Compact Outsole( When outsole is tested in accordance with 8.3 of IS 15298 (Part 1), the relative volume loss shall not be greater than 250 mm³ for materials having density 0.9 g/cm³ or less, and not greater than 150 mm³ for materials with density greater than 0.9 g/cm³.)	-	45000	-
Cl.6.2 Flexing Resistance of Compact Outsole( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-	45000	-
Cl.6.4 Resistance to Hot Contact( — Sole Heel When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform and shall not develop any cracks when bent around the mandrel.)	-	45000	-
Cl.6.5 Hydrolysis( When bottom sole or other components are made out of polyurethane, the same shall be tested in accordance with 8.5 of IS 15298 (Part 1) and the same shall comply with 5.8.5 of IS 15298 (Part 2).)	-	45000	-
Cl.5.2.5 Compact Sole Heel Cl.5.2.5.1 IS 3400 (Part 2)(requirements prescribed in col 3 of Table 2 when tested as per corresponding test methods prescribed in col 4 of Table 2. i)i) Hardness (IRHD)	-	45000	-
Cl.6.3 Tear Strength of Compact Outsole( When outsoles are tested in accordance to 8.2 of IS 15298 (Part 1), the tear strength shall be not less than 8 kN/m for material having density higher than 0.9/cm³ and when density of material is less than or equal to 0.9 g/cm³, tear strength shall not be less than 5 kN/m.)	-	45000	-
Cl.5.2.3 Coated Binding Material IS 1954( Coated binding materials shall conform to the requirements given in col 3 of Table 1 when tested according to the methods prescribed in col 4 of Table 1. i)Width in mm, )	-	45000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water coefficient as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	45000	-
Cl.5.13 Energy Absorption Test(When footwear is tested in accordance with the method prescribed in 5.14 of IS 15298 (Part 1), the energy absorption of the seat region shall not be less than 20 J.)	-	45000	-
Cl.5.2.3 Coated Binding Material Annex C(ii) Breaking load in N, Min (50 cm grip length test specimen) )	-	45000	-
Cl.5.2.1.4 ( Type 2 footwear, the composite upper material shall comply with requirements of water vapour permeability as prescribed in 5.4.6 of IS 15298 (Part 2).)	-	45000	-
CL.5.2.10 Counter Stiffener( A counter stiffener, made out of textile reinforced withpolymer/rubber including (thermoplastic) having thickness not less than 1.5 mm is to be stitched at inside of upper so as to fortify the back of the footwear at joints of quarter.)	-	45000	-
Cl.5.1.1 Fittings(Fittings of the footwear shall be in conformity to Table 9 of IS 1638 (measurement of men’s lasts) and Table 8 of IS 1638 (measurement of women’s lasts).)	-	45000	-
Cl.5.2.1 Upper Cl.5.2.1.1 IS 3400(Part 5)( Composite upper material shall comply with consolidation test as per 5.10.(IS 3400 (Part 5). There shall be no separation at a load of 1.5 kg.))	-	45000	-
Cl.5.2.1.2( Composite upper material shall comply with tear strength as per 5.4.3 of IS 15298 (Part 2).)	-	45000	-
Cl.5.2.1.3 , Cl.6.5 of IS 15298 (Part 1).( Composite upper material shall develop no cracks before 150 000 cycles when tested in accordance with 6.5 of IS 15298 (Part 1).)	-	45000	-
Cl.5.2.1.5( Inner layer of upper shall meet requirement of abrasion resistance as prescribed in 5.5.2 of IS 15298 (Part 2).)	-	45000	-
Cl.5.2.2 Compact Insole/Compact Insocks/Counter Stiffener Lining(Textile material shall be used as lining material for compact insole/compact insocks / counter stiffener. It shall meet the requirement of tear strength as prescribed in 5.6.1 of IS 15298 (Part 2).)	-	45000	-
Cl.5.2.2.1 Abrasion resistance of compact insole/insocks/ counter stiffener( When textiles used as lining for all the above are tested in accordance with 6.12 of IS 15298 (Part 1), the lining shall not develop any holes before the following number of cycles has been performed:)	-	45000	-
Cl.5.2.3.1 In case of cotton black binding materia( the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	45000	-
Cl.5.2.5 Compact Sole Heel Cl. 5.2.5.1 (The compact sole heel shall be made out of polymeric/rubber components and the typical design recommendation (not mandatory) of compact sole heel is as shown in Fig. 3. Sectional view of Type 1/Type 2 ) toe position is given in Fig. 4.)	-	45000	-
Cl.5.2.5 Compact Sole Heel 5.2.5.1 IS 3400 (Part 4)(ii)*Change in hardness after accelerated ageing at 100 ± 2 °C for 24 h )	-	45000	-
Cl.5.2.5.3 Ageing for whole footwear(When rubber is used for manufacturing boots or when the outer sole heel is made of bi-polymer, the finished boots shall be aged at 100 ± 2°C for 24 h. On completion of test, all rubber components shall not develop any sign of tackiness or brittleness.)	-	45000	-
Cl.5.2.5.4 Thickness of compact sole hee(Thickness of compact sole heel of the boots shall comply with the thickness and material requirements prescribed in Table 3.)	-	45000	-
Cl.5.2.5.4 Thickness of compact sole hee(of black cotton thread, the same shall be free from sulphur dyes when tested in accordance with Annex B.)	-	45000	-
Cl.5.2.6 Thread for Upper Closing( The length (m/kg) and construction of sewing thread shall conform to requirements as prescribed in Table 4.)	-	45000	-
Cl.5.2.7 Safety Toe Cap(Safety toe cap as per 3.6 shall be fitted into the footwear and must not come out while in use.)	-	45000	-
Cl.5.2.8.1( The boots shall be provided with laces having minimum length of 115 cm for Type 1 and minimum 100 cm for Type 2.)	-	45000	-
Cl.5.2.8.2 (Minimum breaking load of 60 kg is to be achieved when tested between 18 cm grip length in accordance with Annex C.)	-	45000	-
Cl.5.2.8.3( In case of cotton lace of black colour, the same shall be free from sulphur dyes when tested in accordance with Annex B. Two ends of the laces shall be provided with plastic tips.)	-	45000	-
Cl.5.2.9 Eyelets( Aluminum eyelets of external collar diameter not less than 10 mm and wall thickness of 0.30 to 0.35 mm shall be used.)	-	45000	-
Cl.5.3.2 (The tongue shall be made out of composite upper material and shall be half bellow type for Type 2 and full bellow type for Type 1.)	-	45000	-
Cl.5.3.5 Outer toe cap( shall be provided which is made of polymer/rubber and it shall be strongly adhered such that it shall not open up or come out while in use. Toe of the boot shall be reinforced with safety toe cap)	-	45000	-
Cl.5.3.6( A designed foxing of width of minimum 25 mm and of thickness of minimum 2 mm is to be provided. The foxing shall not extend the edges of the outer sole.)	-	45000	-
Cl.5.3.7( Two pairs of detachable insocks are to be provided. The insocks shall be compact in nature having thickness not less than 2 mm.)	-	45000	-
Cl.5.4 Finish( In appearance, general workmanship and in all other respects with regard to finish and get up of the footwear, the footwear shall be matching to the approved sample of the purchaser.)	-	45000	-
Cl.5.5 Mass(The mass of one pair of finished footwear of size 8 shall not exceed 1 500 g for Type 1 and 1 400 g for Type 2 with an increase or decrease of 100 g for each bigger or smaller size, respectively.)	-	45000	-
Cl.5.6( Height of Upper Height of upper of the boots shall conform to column 5 (Design C) and column 4 (Design B) of 5.2.2, Table 4 of IS 15298 (Part 2) for Type 1 and Type 2, respectively when measured as per 6.2 of IS 15298 (Part 1) on the inside of the back of the footwear and from seat of the insole to top edge of the upper.)	-	45000	-
Cl.5.7 Performance Test(When safety footwear is tested in accordance with the method described in 5.4 of IS 15298 (Part 1), at an impact energy of (200 ± 4) J, the clearance under the toecap at the moment of impact shall be in accordance with Table 5. In addition, the toecap shall not develop any cracks which go through the material, that is, through which light can be seen.)	-	45000	-
Cl.5.8 Upper/Outsole Bond Strength(When the footwear is tested in accordance with the method prescribed in 5.2 of IS 15298 (Part 1), the bond strength shall not be less than 4.0 N/mm, unless there is tearing of the sole in which case the bond strength shall not be less than 3.0 N/mm.)	-	45000	-
Cl.5.9 Sole Interlayer Bond Strength for Bi-polymer( and Bi-density Sole When tested in accordance with 5.2 of IS 15298 (Part 1), the bond strength between the outer or cleated layer and the adjacent layer shall not be less than 4.0 N/mm unless there is tearing of any part of the sole, in which case the bond strength shall not be less than 3.0 N/mm.)	-	45000	-
Cl.5.10 Consolidation Test( Representative sample of width 25 ± 0.5 mm are cut out from the quarter of the upper along the length of boot. The plies are separated by breaking the bond. Carry out the test on two specimens in accordance with IS 3400 (Part 5). Th)	-	45000	-
Cl.5.11 Compression Resistance( 5.11.1 When safety boots are tested in accordance with 5.5 of IS 15298 (Part 1), the clearance under the toe cap at a compression load of 15 kN ± 0.1 kN shall be in accordance with Table 5.)	-	45000	-
Cl.5.12 Internal Length of Toe Cap( For safety boots, internal length of the toe cap shall meet the specification given in Table 5 of IS 15298 (Part 2) when tested as per 5.3 of IS 15298 (Part 1).)	-	45000	-
Cl.6.1 Abrasion Resistance of Compact Outsole( When outsole is tested in accordance with 8.3 of IS 15298 (Part 1), the relative volume loss shall not be greater than 250 mm³ for materials having density 0.9 g/cm³ or less, and not greater than 150 mm³ for materials with density greater than 0.9 g/cm³.)	-	45000	-
Cl.6.2 Flexing Resistance of Compact Outsole( When outsole is tested in accordance with 8.4 of IS 15298 (Part 1), the cut growth shall not be greater than 4 mm before 30 000 cycles.)	-	45000	-
Cl.6.4 Resistance to Hot Contact( — Sole Heel When sole heel is tested in accordance with 8.7 of IS 15298 (Part 1), the material shall not melt/deform and shall not develop any cracks when bent around the mandrel.)	-	45000	-
Cl.6.5 Hydrolysis( When bottom sole or other components are made out of polyurethane, the same shall be tested in accordance with 8.5 of IS 15298 (Part 1) and the same shall comply with 5.8.5 of IS 15298 (Part 2).)	-	45000	-
4(Types)	-	45000	-
5(Requirements)	-	45000	-
5.1(Design)	-	45000	-
5.10(consolidation test IS 3400 (Part 5))	-	45000	-
5.2.4(Reinforcing Material)	-	45000	-
5.2.8.4(Colour of the lace)	-	45000	-
5.3, 5.3.1,5.3.3,5.3.4(Construction)	-	45000	-
5.10(Consolidation Test IS 3400 (Part 5) : 1986)	-	45000	-
8(CHEMICAL REQUIREMENTS)	-	45000	-
9, 9.1(BIS CERTIFICATION MARKING)	-	45000	-
10(Marking)	-	45000	-
11(Packing)	-	45000	-
Cl. 5.2.4(Reinforcing Material)	-	45000	-
Cl. 5.2.8.4(Colour of the lace)	-	45000	-
11(PACKING)	-	45000	-
Cl. 5.3(Construction 5.3.1,5.3.3,5.3.4)	-	45000	-
10(Marking)	-	45000	-
7.1(Resistance to fuel)	-	45000	-
7.2(Resistance to electricity)	-	45000	-
9, 9.1(BIS CERTIFICATION MARKING)	-	45000	-
Cl. 8 (IS 17011, Table-1 (i))(Allergenic and carcinogenic disperse dyes)	-	45000	-
Cl-8 (IS 17011, Table-1 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	45000	-
Cl-8 (IS 17011, Table-1 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	45000	-
Cl-8(IS 17011, Table-1 (iv)(Chromium (VI))	-	45000	-
Cl-8 (IS 17011, Table-1 (v)(Dimethyl fumarate (DMFU))	-	45000	-
Cl-8 (IS 17011, Table-1 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	45000	-
Cl-8 (IS 17011, Table-1 (vii)(Formaldehyde)	-	45000	-
Cl-8(IS 17011, Table-1 (viii)(Organotin compounds)	-	45000	-
Cl-8 (IS 17011, Table-1 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	45000	-
Cl-8 (IS 17011, Table-1 (x)(pH)	-	45000	-
Cl-8 (IS 17011, Table-1 (xi)(Phthalates (each individual phthalate))	-	45000	-
Cl-8 (IS 17011, Table-1 (xii)(Nickel, on skin contact)	-	45000	-
Cl- 5.2.8.1 (Amendment No. 2)(General)	-	45000	-
Cl- 5.2.8.2 (Amendment No. 2)(Internal length of toecap)	-	45000	-
Cl- 5.2.8.3 (Amendment No. 2)(Corrosion resistance)	-	45000	-
Cl- 5.2.9.5 (Amendment No. 2)(Breaking load and tag retention)	-	45000	-
Cl- 5.2.9.6.1 (Amendment No. 2)(Abrasion resistance- Lace to lace)	-	45000	-
Cl- 5.2.9.6.2 (Amendment No. 2)(Abrasion resistance- Lace to eyelet)	-	45000	-
Cl- 5.2.10 (Amendment No. 2)(Force required to pull out the eyelets)	-	45000	-
Cl- 5.2.12.1 (Amendment No. 2)(Insole- Material and thickness)	-	45000	-
Cl- 5.2.12.2 (Amendment No. 2)(Insole- Abrasion resistance)	-	45000	-
Cl- 5.2.12.3 (Amendment No. 2)(Insole- Water absorption and desorption)	-	45000	-
Cl- 5.2.13.1 (Amendment No. 2)(Insock- Abrasion resistance)	-	45000	-
Cl- 5.2.13.2 (Amendment No. 2)(Insock- Water absorption and desorption)	-	45000	-

-
-

IS 17043 : Part 1 (2024)

Shoes - Specification Part 1 Shoes for Services

ALL

38500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.2(Design)	-	38500	-
Cl-4.3.1(Size)	-	38500	-
Cl-4.3.2(Weight)	-	38500	-
Cl-4.4(Height of Upper)	-	38500	-
Cl-4.5, S.Cl-4.5.2(Ergonomic Feature)	-	38500	-
Cl-4.5, S.Cl-4.5.3(Bond Strength)	-	38500	-
Cl-4.5, S.Cl-4.5.4(Slip Resistance)	-	38500	-
Cl-4.5.5.1(Electrical Properties-Antistatic footwear)	-	38500	-
Cl-4.5, S.Cl-4.5.6(Heat Insulation of Sole Complex)	-	38500	-
Cl-4.5, S.Cl-4.5.7(Cold Insulation of Sole Complex)	-	38500	-
Cl-4.6.1(Material)	-	38500	-
Cl-4.6.2(Tear Strength)	-	38500	-
Cl-4.6.3(Water Vapour Permeability and Coefficient)	-	38500	-
Cl-4.6.4(Water Penetration and Water Absorption)	-	38500	-
Cl-4.7.1(Material)	-	38500	-
Cl-4.7.2(Tear Strength)	-	38500	-
Cl-4.7.3(Abrasion Resistance)	-	38500	-
Cl-4.7.4(Water Vapour Permeability and Coefficient)	-	38500	-
Cl. 4.8.1(Material)	-	38500	-
Cl-4.8.2(Abrasion Resistance)	-	38500	-
Cl-4.8.3(Water Absorption and Desorption)	-	38500	-
Cl-4.9.3(Abrasion Resistance)	-	38500	-
Cl-4.10(Toe Puff and Counter Stiffener)	-	38500	-
Cl-4.11.1(Material)	-	38500	-
Cl-4.11.2(Tear Strength)	-	38500	-
Cl-4.12(Closing Thread)	-	38500	-
Cl-4.13.2(Thickness)	-	38500	-
Cl-4.13.3(Moulded Density)	-	38500	-
Cl-4.13.4(Hardness)	-	38500	-
Cl-4.13.5(Ageing Test)	-	38500	-
Cl-4.13.6(Tear Strength)	-	38500	-
Cl-4.13.7(Abrasion Resistance)	-	38500	-
Cl-4.13.8(Flexing Resistance)	-	38500	-
Cl-4.14(Eyelet)	-	38500	-
Cl-4.15.2(Breaking Load and Tag Retention)	-	38500	-
Cl-5(Chemical Requirements)	-	38500	-
Cl-7(Marking)	-	38500	-
Cl.4.5.8(Energy Absorption of Seat Region)	-	38500	-
Cl- 4.5.3.1(Upper-outsole bond strength)	-	38500	-
Cl.4.5.3.2(Interlayer bond strength)	-	38500	-
Cl-4.9.1(Material)	-	38500	-
Cl-4.9.2(Water Absorption and Desorption)	-	38500	-
Cl-4.13.1(Material)	-	38500	-
Cl-4.15.1(Material)	-	38500	-
Cl-5, Table 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	38500	-
Cl-5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	38500	-
Cl-5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	38500	-
Cl-5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	38500	-
Cl-5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	38500	-
Cl-5, Table no 1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	38500	-
Cl-5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	38500	-
Cl-5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	38500	-
Cl-5, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	38500	-
Cl-5, Table no 1 of IS 17011 (x)(pH)	-	38500	-
Cl-5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	38500	-
Cl-5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	38500	-
4.9 Insocks(Insock thickness)	-	38500	-

-
-

IS 15298 : Part 3 (2024)

Personal Protective Equipment Part 3 Protective Footwear (ISO 20346 : 2021, MOD) (Third Revision)

ALL

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	50000	-
Cl 5.2.2(" Height of upper ")	-	50000	-
Cl 5.2.3(Heel area)	-	50000	-
Cl 5.3.1.1(Construction of whole footwear)	-	50000	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	50000	-
Cl 5.3.2.1(Toe protection - general)	-	50000	-
Cl 5.3.2.2(Internal length)	-	50000	-
Cl 5.3.2.3(Width of toecap flange)	-	50000	-
Cl 5.3.2.4.1(Corrosion resistance of Class I footwear and hybrid mounted footwear)	-	50000	-
Cl 5.3.2.4.2(Corrosion resistance of Class II and hybrid moulded footwear)	-	50000	-
Cl 5.3.2.5(Behaviour of toecaps (thermal and chemical) of Corrosion resistance)	-	600	-
Cl 5.3.2.6(Impact resistance)	-	50000	-
Cl 5.3.2.7(Compression resistance)	-	50000	-
Cl 5.3.3(Leak proofness)	-	50000	-
Cl 5.3.4("Specific ergonomic features ")	-	50000	-
Cl 5.3.5.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (i)(Allergenic and carcinogenic disperse dyes)	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	50000	-
Cl 5.3.6, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (x)(pH)	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	50000	-
Cl 5.3.6, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	50000	-
Cl 5.3.7(Seam strength)	-	50000	-
Cl 5.3.8(Lead Content ( National Annex A))	-	50000	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	50000	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	50000	-
Cl 5.4.2(Thickness)	-	50000	-
Cl 5.4.3(Tear strength)	-	50000	-
Cl 5.4.4, Table 11(Tensile properties- Breaking Force)	-	50000	-
Cl 5.4.4, Table 11(Tensile properties-Modulus at 100 % elongation)	-	50000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	50000	-
Cl 5.4.4, Table 11(Tensile properties- Elongation at break)	-	50000	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	50000	-
Cl 5.4.7(Resistance to hydrolysis)	-	50000	-
Cl 5.5.2(Lining- Tear strength)	-	50000	-
Cl 5.5.3(Lining- Abrasion resistance)	-	50000	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	50000	-
Cl 5.6.2(Tear strength of tongue)	-	50000	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	50000	-
Cl 5.7.2(Water permeability of insock)	-	50000	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	50000	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	50000	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	50000	-
Cl 5.8.2.1(Thickness of Outsole)	-	50000	-
Cl 5.8.2.2(Cleated area)	-	50000	-
Cl 5.8.3(Outsole- Tear strength)	-	50000	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	50000	-
Cl 5.8.5(Outsole-Flexing resistance)	-	50000	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	50000	-
Cl 5.8.7(Interlayer bond strength)	-	50000	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	50000	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	50000	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	50000	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	50000	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	50000	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	50000	-
Cl 6.2.1.4.2.1(Corrosion resistance of perforation resistant metallic insert for Class I footwear and hybrid mounted footwear)	-	50000	-
Cl 6.2.1.4.2.2(Corrosion resistance of perforation resistant metallic insert for Class II footwear and hybrid moulded footwear)	-	50000	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	50000	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	50000	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	50000	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	50000	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	50000	-
Cl 6.2.4(Energy absorption of seat region)	-	50000	-
Cl 6.2.5(Water resistance)	-	50000	-
Cl 6.2.6.1(Metatarsal protection - Construction)	-	50000	-
Cl 6.2.6.2("Metatarsal protection-Impact resistance of metatarsal protective device ")	-	50000	-
Cl 6.2.7(Ankle protection)	-	0	-
Cl 6.2.8.2(Cut resistance footwear- design)	-	50000	-
Cl 6.2.8.2(Dimensions and construction of protective area of Cut resistance footwear)	-	50000	-
Cl 6.2.8.3(Resistance to cutting)	-	50000	-
Cl 6.2.9(Scuff cap)	-	50000	-
Cl 6.2.10("Slip resistance on ceramic tile floor with glycerine ")	-	50000	-
Cl 6.3(Upper — Water penetration and absorption)	-	50000	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	50000	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	50000	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	50000	-
Cl 6.4.3.2(Design of Ladder grip)	-	50000	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	50000	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	50000	-
Cl 7("Marking ")	-	50000	-
Cl 7("Marking ")	-	50000	-
Cl 5.4.5(Flexing resistance)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	50000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	50000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	50000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	50000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	50000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	50000	-
Cl 5.4.4, Table 11(Tensile properties- Tensile strength)	-	50000	-
Cl 5.8.2.3(Cleat height)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	50000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	50000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	50000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	50000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	50000	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	50000	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	50000	-
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	50000	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	50000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	50000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	50000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	50000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	50000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	50000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	50000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	50000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	50000	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	50000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	50000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	50000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	50000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	50000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	50000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	50000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	50000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	50000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	50000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	50000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	50000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	50000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	50000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	50000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresidine)	-	50000	-

-
-

IS 15298 : part 4 (2024)

Personal Protective Equipment Part 4 Occupational Footwear (ISO 20347 : 2021, MOD) (Third Revision)

ALL

39000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 5.2(Design)	-	500	-
Cl 5.2.2(" Height of upper ")	-	500	-
Cl 5.2.3(Heel area)	-	500	-
Cl 5.3.1.1(Construction of whole footwear)	-	500	-
Cl 5.3.1.2(Upper/outsole bond strength)	-	500	-
Cl 5.3.2(Leak proofness)	-	500	-
Cl 5.3.3(Specific ergonomic features)	-	500	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	500	-
Cl 5.3.5, Table no 1 of IS 17011,(i)(Allergenic and carcinogenic disperse dyes)	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (iv)(Chromium (VI))	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (v)(Dimethyl fumarate (DMFU))	-	500	-
Cl 5.3.5, Table no1 of IS 17011 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (vii)(Formaldehyde)	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (viii)(Organotin compounds)	-	500	-
Cl 6.2.5(Water resistance)	-	800	-
Cl 5.3.5, Table no 1 of IS 17011 (x)(pH)	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (xi)(Phthalates (each individual phthalate))	-	500	-
Cl 5.3.5, Table no 1 of IS 17011 (xii)(Nickel, on skin contact)	-	500	-
Cl 5.3.6(Seam strength)	-	500	-
Cl 5.3.7(Lead Content ( National Annex A))	-	500	-
Cl 5.4.1.1(Class I footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.1.2(Hybrid footwear, determination of the area where upper requirements apply of Upper)	-	500	-
Cl 5.4.2(Thickness)	-	500	-
Cl 5.4.3(Tear strength)	-	800	-
Cl 5.4.4, Table 9(Tensile properties- Tensile strength)	-	800	-
Cl 5.4.4, Table 9(Tensile properties- Breaking Force)	-	800	-
Cl 5.4.4, Table 9(Tensile properties-Modulus at 100 % elongation)	-	800	-
Cl 5.4.4, Table 9(Tensile properties- Elongation at break)	-	800	-
Cl 5.4.5(Flexing resistance)	-	800	-
Cl 5.4.6(Water vapour permeability and coefficient)	-	800	-
Cl 5.4.7(Resistance to hydrolysis)	-	800	-
Cl 5.5.2(Lining- Tear strength)	-	800	-
Cl 5.5.3(Lining- Abrasion resistance)	-	800	-
Cl 5.5.4(Lining-Water vapour permeability and coefficient)	-	800	-
Cl 5.6.2(Tear strength of tongue)	-	800	-
Cl 5.7.1(Thickness of Insole, insock and footbed)	-	500	-
Cl 5.7.2(Water permeability of insock)	-	800	-
Cl 5.7.3(Water absorption and desorption of Insole, insock and footbed)	-	800	-
Cl 5.7.4.1(Abrasion resistance of Insoles)	-	800	-
Cl 5.7.4.2(Abrasion resistance of Insocks)	-	800	-
Cl 5.8.2.1(Thickness of Outsole)	-	500	-
Cl 5.8.2.2(Cleated area)	-	500	-
Cl 5.8.2.3(Cleat height)	-	500	-
Cl 5.8.3(Outsole- Tear strength)	-	800	-
Cl 5.8.4(Outsole- Abrasion resistance)	-	800	-
Cl 5.8.5(Outsole-Flexing resistance)	-	800	-
Cl 5.8.6(Outsole-Resistance to hydrolysis)	-	800	-
Cl 5.8.7(Interlayer bond strength)	-	800	-
Cl 6.2.1.1.2(Metallic perforation-resistant inserts (Type P))	-	800	-
Cl 6.2.1.1.3(Non-metallic perforation-resistant inserts and insoles (Type PL))	-	800	-
Cl 6.2.1.1.4(Non-metallic perforation-resistant inserts and insoles (Type PS))	-	800	-
Cl 6.2.1.2(Construction of perforation resistant insert)	-	800	-
Cl 6.2.1.3(Dimensions of perforation resistant insert)	-	800	-
Cl 6.2.1.4.1(Flex resistance of perforation-resistant inserts)	-	800	-
Cl 6.2.1.4.2.1(ISO 20344:2021, 5.11.2)	-	800	-
Cl 6.2.1.4.2.2(ISO 20344:2021, 5.6.2.1)	-	800	-
Cl 6.2.1.4.3(Stability against ageing and environmental influence of non-metallic perforationresistant inserts)	-	800	-
Cl 6.2.2.1(Electrical properties of Partially conductive footwear)	-	800	-
Cl 6.2.2.2(Electrical properties of Antistatic footwear)	-	800	-
Cl 6.2.3.1(Heat insulation of outsole complex)	-	800	-
Cl 6.2.3.2(Cold insulation of outsole complex)	-	800	-
Cl 6.2.4(Energy absorption of seat region)	-	800	-
Cl 6.2.6(Ankle protection)	-	0	-
Cl 6.2.7.1(Cut resistance footwear- design)	-	800	-
Cl 6.2.7.2(Dimensions and construction of protective area of Cut resistance footwear)	-	500	-
Cl 6.2.7.3(Resistance to cutting)	-	500	-
Cl 6.2.8(Scuff cap)	-	500	-
Cl 6.2.9("Slip resistance on ceramic tile floor with glycerine ")	-	800	-
Cl 6.3(Upper — Water penetration and absorption)	-	800	-
Cl 6.4.1(Resistance to hot contact - Outsole)	-	800	-
Cl 6.4.2(Resistance to fuel oil - Outsole)	-	800	-
Cl 6.4.3.1(Mechanical properties of Ladder grip)	-	800	-
Cl 6.4.3.2(Design of Ladder grip)	-	800	-
Cl 6.4.3.3(Cleat height in the waist area of Ladder grip)	-	800	-
Cl 6.4.3.4(Heel breast of Ladder grip)	-	800	-
Cl 7("Marking ")	-	500	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	800	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	800	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	800	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	800	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	800	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	800	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	800	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	800	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	800	-
Cl. No.8.6.1,Table 1 of IS 17011(Chromium)	-	600	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	600	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	600	-
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	600	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	600	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	600	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	600	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	600	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	600	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	600	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	600	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	600	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	600	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	600	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	600	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	600	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	600	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	600	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	600	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	600	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	600	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	600	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	600	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	600	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	600	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	600	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	600	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	600	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	600	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	600	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	600	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse :yellow 23)	-	600	-
Cl 5.3.4.2(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution (ii))	-	800	-

-
-

IS 12254 (2021)

POLYVINYLCHLORIDE PVC INDUSTRIAL BOOTS - SPECIFICATION Second Revision

ALL

43500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Size)	-	43500	-
5.3(Height)	-	43500	-
5.4.4(Slip resistance)	-	43500	-
5.4.5(Leak proofness)	-	43500	-
5.4.6.1(Toe caps General)	-	43500	-
5.4.6.2(Internal length of toecaps)	-	43500	-
5.4.6.3(Corrosion resistance)	-	43500	-
5.4.6.4(Impact resistance)	-	43500	-
5.4.6.5(Compression resistance)	-	43500	-
5.4.7(Colour)	-	43500	-
5.5.1(Upper material)	-	43500	-
5.5.1(Upper Thickness)	-	43500	-
5.5.2(Upper tensile strength)	-	43500	-
5.5.3(Upper flexing)	-	43500	-
5.5.4(Upper Hardness)	-	43500	-
5.6.1(Lining material)	-	43500	-
5.6.2(Lining Tear strength)	-	43500	-
5.6.3(Lining abrasion)	-	43500	-
5.6.4(Lining adhesion with upper)	-	43500	-
5.7.1(Insole material)	-	43500	-
5.7.1(Insole thickness)	-	43500	-
5.7.2(Insole abrasion)	-	43500	-
5.7.3(Water absorption and desorption)	-	43500	-
5.8.2(Eyelets material)	-	43500	-
5.8.2(Lace material)	-	43500	-
5.8.2(Lace length)	-	43500	-
5.8.2(Lace breaking load)	-	43500	-
5.9.1(Insock material)	-	43500	-
5.9.2(Inscok abrasion resistance)	-	43500	-
5.9.3(Insock water absorption and desorption)	-	43500	-
5.8.2(Closing thread breaking load)	-	43500	-
5.11.1(Outsole material)	-	43500	-
5.11.1(Outsole thickness)	-	43500	-
5.11.2(Outsole density)	-	43500	-
5.11.3(Outsole Interlayer bond)	-	43500	-
5.11.4(Outsole tear)	-	43500	-
5.11.5(Outsole Abrasion)	-	43500	-
5.11.6(Outsole hardness)	-	43500	-
5.11.7(Outsole flexing)	-	43500	-
5.4.2(Ergonomic feature)	-	43500	-
5.4.3(Sole bond)	-	43500	-
5.4.8.1(Conductive Footwear)	-	43500	-
5.4.8.2(Antistatic Footwear)	-	43500	-
5.4.8.3.2(Penetration resistance)	-	43500	-
5.4.8.4(Cut resistance)	-	43500	-
5.5.5(Upper Cold flex resistance)	-	0	-
5.4.8.6(Outsole resistance to fuel oil)	-	43500	-
5.11.8(Outsole cold flex resistance)	-	43500	-
6.1(Volatility)	-	43500	-
5.4.8.5(Outsole resistance to acid and alkali)	-	43500	-
6.2(Lead content)	-	43500	-
Table 1 as per IS 17011 2018(pH)	-	43500	-
Table 1 as per IS 17011 2018(Phthalates (each individual phthalate))	-	43500	-
Table 1 as per IS 17011 2018(Nickel, on skin contact)	-	43500	-
Table 1 as per IS 17011 2018(Allergenic and carcinogenic disperse dyes)	-	43500	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	43500	-
Table 1 as per IS 17011 2018(Aromatic amines released from Azo dyes (each individual amine))	-	43500	-
Table 1 as per IS 17011 2018(Chromium (VI))	-	43500	-
Table 1 as per IS 17011 2018(Dimethyl fumarate (DMFU))	-	43500	-
Table 1 as per IS 17011 2018(Formaldehyde (free or released by partial hydrolysis))	-	43500	-
Table 1 as per IS 17011 2018(Formaldehyde)	-	43500	-
Table 1 as per IS 17011 2018(Organotin compounds)	-	43500	-
Table 1 as per IS 17011 2018(PCP-TeCP-TriCP polychlorophenols)	-	43500	-
5.10(Closing Thread (If used))	-	43500	-
Cl.6.2(Lead Content-IS 12240 (Part 5),)	-	43500	-
Cl.6.1(Volatility- IS 12240 (Part 4))	-	43500	-

-
-

IS 15573 (2018)

Polyaluminium chloride (First Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Description -)	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(i)(Aluminium as Al2O3,)	-	1500	-
5.1.1, 5.1.2, 5.2, Table-1(ii)(Basicity)	-	1000	-
5.1.1, 5.1.2, 5.2, Table-1(iii)(Chloride (as Cl))	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(iv)(Sulphates(as SO4))	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(v)(Specific gravity)	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(x)(Insoluble)	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(xi)(Ph of 5% of solution)	-	500	-
5.1.1, 5.1.2, 5.2, Table-1(vii)(Bulk density)	-	500	-
5.1.1,5.1.2,5.2, Table-1, Toxic substances(Mercury(as Hg))	-	1200	-
5.1.1, 5.1.2 ,5.2, Table-1, Toxic substances(Arsenic(as As))	-	1200	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Cadmium(as Cd))	-	1200	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Lead(as Pb))	-	1200	-
5.1.1.5.1.2,5.2, Table-1, Toxic substances(Iron(as Fe))	-	1200	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Manganese(as Mn))	-	1200	-
5.1.1, 5.1.2, 5.2, Table-1, Toxic substances(Chromium (as Cr))	-	1200	-
5.1.1, 5.12, 5.2, Table-1, Toxic substances(Selenium (as Se))	-	1200	-
Clause no. 5.1(Description)	-	500	-
Clause no. 5.1(Description)	-	500	-
Clause no. 5.1(Description)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (i)(Aluminium as Al2O3)	-	1000	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (ii)(Relative basicity)	-	1000	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (iii)(Chloride as Cl)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (iv)(Sulphate as SO4)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (v)(Specific gravity at 25°C)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (v)(Specific gravity at 25°C)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (vii)(Bulk Density)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (a)(Toxic Substances: Mercury (as Hg))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (a)(Toxic Substances: Mercury (as Hg))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (b)(Toxic Substances: Arsenic (as As))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (b)(Toxic Substances: Arsenic (as As))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (b)(Toxic Substances: Arsenic (as As))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) ©(Toxic Substances: Cadmium (as Cd))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) ©(Toxic Substances: Cadmium (as Cd))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (d)(Toxic Substances: Lead (as Pb))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (d)(Toxic Substances: Lead (as Pb))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (d)(Toxic Substances: Lead (as Pb))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) €(Toxic Substances: Iron (as Fe))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) €(Toxic Substances: Iron (as Fe))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) €(Toxic Substances: Iron (as Fe))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (f)(Toxic Substances: Manganese (as Mn))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (f)(Toxic Substances: Manganese (as Mn))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (f)(Toxic Substances: Manganese (as Mn))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (g)(Toxic Substances: Chromium (as Cr))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (g)(Toxic Substances: Chromium (as Cr))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (g)(Toxic Substances: Chromium (as Cr))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (h)(Toxic Substances: Selenium (as Se))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (viii) (h)(Toxic Substances: Selenium (as Se))	-	1200	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (x)(Insolubles)	-	500	-
Clauses no. 5.1.1, 5.1.2, 5.2, Table 1, Sl No. (xi)(pH of 5% of solution, w/v)	-	500	-

-
-

IS 5557 : Part 1 (2024)

All Rubber Gum Boots and Ankle Boots Part 1 Safety and Protective

ALL

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5(Design)	-	250	-
6(Sizes and Fittines)	-	250	-
7(Consturction)	-	250	-
8.1(Lining Material)	-	250	-
8.2, Table-1 (i)(Width, mm, Min)	-	500	-
8.2, Table-1 (ii)(Breaking load, N, Min (50 cm grip length test specimen))	-	1000	-
8.3, Table-2 (i)(Sewing thread for piping/binding")	-	500	-
8.4(Use of Rubber material)	-	250	-
8.4.1, Table-3 (i)(Hardness, (IRHD))	-	1000	-
8.4.1, Table-3 (ii)(Change in hardness after accelerated ageing at 100 ⁰C ± 2 ⁰C for 24 h)	-	1500	-
8.5(Upper material)	-	250	-
8.5.1(Tensile Strength of upper)	-	1000	-
8.5.2(Thickness)	-	500	-
8.5.3(Flexing Resistance)	-	1500	-
8.5.4(Abrasion Resistance)	-	1000	-
8.6.1(Thickness of Outsole)	-	250	-
8.6.2(Tear Strength)	-	1000	-
8.6.3(Abrasion Resistance of Outsole)	-	1200	-
8.6.4(Flexing Resistance)	-	500	-
8.6.5(Inter layer Bond Strength of outsole)	-	1000	-
Cl-8.7(Insocks material)	-	250	-
8.7.1(Thickness of Insocks)	-	500	-
Cl-8.7.2(Abrasion Resistance of Insock)	-	1000	-
Cl-8.8.1(Outsole/Heel)	-	1000	-
Cl-8.9(Leak Proof Test)	-	1200	-
8.10(Height of Upper)	-	500	-
8.11(Adhesion Test for Rubberized Textile Upper)	-	1000	-
Cl-8.12(Upper Outsole Bond Strength)	-	1000	-
Cl-8.13(Internal Length of Toe Cap)	-	500	-
Cl-8.14(Impact Resistance of Safety Footwear)	-	1000	-
Cl-8.15(Compression Resistance of Safety Footwear)	-	1000	-
8.16(Banned Chemicals)	-	15000	-
8.17(Ceramic Tile Floor with sodium lauryl sulphate (NaLS))	-	1000	-
8.17(Steel Floor with Glycerine)	-	1000	-
8.18(Corrosion Resistant Test for Toe Caps)	-	1000	-
9.1(Penetration Resistance)	-	1000	-
9.2(Antistatic Footwear)	-	1500	-
9.3(Flame Resistance Property)	-	0	-
9.4(Electrical Resistance)	-	0	-
9.5(Resistance to Acid and Alkali- Limited contact with chemicals),)	-	1000	-
9.5(Resistance to Acid and Alkali- Prolonged contact with chemicals)	-	1000	-
9.6(Resistance to Fuel Oil)	-	1000	-
11.2(Marking)	-	250	-

-
Included w.e.f. 01.04.2026 Exclusion: "9.3 (Flame Resistance Property) 9.4 (Electrical Resistance)"

IS 15298 : Part 2 (2016)

Personal protective equipment: Part 2 safety footwear (Second Revision)

ALL

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4,Table 1(Class I, IS 15298)	-	1000	-
4,Table 1(Class II, IS 15298)	-	1000	-
5.2,5.2.1, Fig 3(Design,General, IS 15298)	-	1000	-
5.2.2, Fig 4(Height of Upper, ISO 20344 , 6.2)	-	600	-
5.2.3, Table 10 ,Design A(Seat Region)	-	600	-
5.3.1.1(Construction)	-	500	-
5.3.1.2(Upper/outer sole bond strength , ISO 20344 , 5.2)	-	600	-
5.3.2.1(General, EN 12568 OF 4.2.2.2)	-	700	-
5.3.2.2,Table 5(Internal length of toecaps , ISO 20344 , 5.3)	-	600	-
5.3.2.3,Table 6(Impact resistance of safety footwear,ISO 20344 , 5.4)	-	700	-
5.3.2.4 ,Table 6(Compression Resistance of safety footwear ,ISO20344 , 5.5)	-	700	-
5.3.2.5.1(Corrosion resistance of metallic toecaps ,ISO20344 , 5.6.2)	-	600	-
5.3.2.5.2(Non metallic toe caps ,EN 12568)	-	500	-
5.3.3(Leak proofness ,ISO 20344 , 5.7)	-	800	-
5.3.4(Specific ergonomic feature ,ISO 20344 , 5.1)	-	700	-
5.3.5.2,Table 7(Slip resistance on ceramic tile floor with sodium lauryl sulphate (NaLS) solution)	-	700	-
5.3.5.3,Table 8(Slip resistance on steel floor with glycerin)	-	800	-
5.3.5.4(Slip resistance on ceramic tile floor with NaLS and on steel floor with glycerin)	-	800	-
5.3.6(Innocuousness)	-	700	-
5.4.1,Table 10(General)	-	500	-
5.4.2, Table 11(Thickness , ISO 20344 , 6.1 )	-	500	-
5.4.3, Table 12(Tear Strength, ISO 20344 , 6.3 )	-	700	-
5.4.4, Table 13(Tensile properties ,ISO 20344 , 6.4.1 )	-	700	-
5.4.5, Table 14(Flexing resistance ,ISO 20344,6.5)	-	600	-
5.4.6(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	600	-
5.4.7(Ph Value ; ISO 20344,6.9)	-	500	-
5.4.8(Hydrolysis ; ISO 20344,6.10)	-	600	-
5.4.9(Chromium VI content; ISO 17075)	-	700	-
5.5.1,Table 15(Tear Strength, ISO 20344 , 6.3)	-	700	-
5.5.2(Abrasion Resistance ;ISO 20344 , 6.12)	-	600	-
5.5.3(Water vapour permeability and coefficient,ISO 20344,6.6 & 6.8)	-	600	-
5.5.4(Ph Value ; ISO 20344,6.9)	-	500	-
5.5.5(Chromium VI content; ISO 17075)	-	700	-
5.6(Tongue - IS 15298 Part 2 )	-	700	-
5.6.1,Table 16(Tear Strength, ISO 20344 , 6.3)	-	700	-
5.6.2(Ph Value ; ISO 20344,6.9)	-	500	-
5.6.3(Chromium VI content; ISO 17075)	-	700	-
5.7.1;Table 3(Thickness ; ISO 20344,7.1)	-	500	-
5.7.2(Ph Value ; ISO 20344,6.9)	-	500	-
5.7.3(Water Absorption and desorption ISO 20344,7.2 )	-	700	-
5.7.4.1(Insole ; ISO 20344,7.3 )	-	600	-
5.7.4.2(Insocks ; ISO 20344, 6.12)	-	600	-
5.7.5(Chromium VI content; ISO 17075)	-	1000	-
5.8.1(Design, IS 15298 Part 2 )	-	500	-
5.8.1.1, Table 17(Thickness ; ISO 20344, 8.1.2)	-	500	-
5.8.1.2(Cleated area ; ISO 20344 , Fig 38)	-	600	-
5.8.1.3, Table 17(Cleat height; ISO 20344, 8.1)	-	600	-
5.8.2(Tear Strength, ISO 20344 , 8.2)	-	700	-
5.8.3(Abrasion Resistance ;ISO 20344 , 8.3)	-	700	-
5.8.4(Flexing resistance ,ISO 20344,8.4)	-	700	-
5.8.5(Hydrolysis ; ISO 20344,8.5)	-	700	-
5.8.6(Interlayer bond strength; ISO 20344, 5.2)	-	800	-
6.2.1.1.1(Metallic anti-penetration insert; ISO 20344, 5.8.2)	-	700	-
6.2.1.1.2(Non-metallic anti-penetration insert; ISO 20344, 5.8.3)	-	700	-
6.2.1.2(Consruction)	-	600	-
6.2.1.3(Dimension ; ISO 20344, 5.8.1)	-	500	-
6.2.1.4(Flex resistance of penetration -resistant insert ; ISO 20344,5.9)	-	700	-
6.2.1.5.1(Corrosion resistance of penetration -resistant metallic insert - ISO 20344, 5.6.3 &5.6.1)	-	700	-
6.2.1.5.2(Penetration -resistant non-metallic insert ; EN 12568,6.4&7.4)	-	700	-
6.2.2.1 (Conductive footwear ; ISO 20344,5.10 & 5.10.3.3)	-	800	-
6.2.2.2(Antistatic footwear ; ISO 20344,5.10)	-	800	-
6.2.2.3(Electrically insulating footwear; EN 50321)	-	600	-
6.2.3.1(Hear insulation of sole complex; ISO 20344,5.12 ;Annex B)	-	600	-
6.2.3.2(Cold insulation of sole complex; ISO 20344,5.13)	-	600	-
6.2.4(Energy absorption of seat region; ISO 20344,5.14)	-	600	-
6.2.5(Water resistance ; 5.15.1 & 5.15.2)	-	700	-
6.2.6.1(Construction)	-	600	-
6.2.6.2 , Table 19(Impact resistance of metatarsal protective device,ISO 20344 , 5.16)	-	700	-
6.2.7 (Ankle protection ; ISO 20344 , 5.17)	-	0	-
6.2.8.1(Design)	-	500	-
6.2.8.2(Construction)	-	600	-
6.2.8.3,EN 388(Resistance to cutting ,EN 388)	-	600	-
6.2.8.4(Penetration Resistance)	-	600	-
6.3(Upper--Water penetration and absorption ; ISO 20344 , 5.13)	-	600	-
6.4.1(Resistance to hot contact ; ISO 20344 , 8.7)	-	600	-
6.4.2(Resistance to fuel oil ; ISO 20344 , 8.6.1& 8.6.2 ; )	-	600	-
Cl.5.3.5.1, Cl.5.3.5.2,Cl.5.3.5.3 or 5.3.5.4 IS 15298 (Part1):2015,ISO 20344:2011,5.11(General)	-	800	-
Cl.7, table 2,table 18,table 20, table21, EN 13832-1,EN 13832-3: 2006,6.2.2.3(Marking)	-	800	-
8(Information to be supplied)	-	700	-
Cl.8.1 IS 15298 Part 2:2016 + A1:2019 + A2:2019, ISO 20345 :2011(General)	-	1000	-
8.2(Electrical Properties)	-	800	-
8.2.2(Antistatic footwear)	-	700	-
8.3(Insocks)	-	800	-
Cl.5.7.3(Water absorption and desorption)	-	600	-
Cl.5.7.2(PH value)	-	500	-
5.5.1(Tear strength)	-	600	-
5.5.2(Abrasion Resistance)	-	600	-
5.5.3(W.V.P & W.V.C)	-	600	-
5.7.1(Insole thickness)	-	500	-
5.7.4.2(Insock abrasion)	-	600	-
5.8.1.2(Cleated area)	-	600	-
5.8.4(Flexing resistance)	-	800	-
5.8.1.1(Thickness)	-	500	-
5.8.1.3(Cleat height)	-	500	-
Cl-5.3.6 (IS 17011, Table-1 (i)(Allergenic and carcinogenic disperse dyes)	-	800	-
Cl-5.3.6 (IS 17011, Table-1 (ii)(Aromatic amines released from Azo dyes (each individual amine))	-	600	-
Cl-5.3.6 (IS 17011, Table-1 (iii)(Aromatic amines released from Azo dyes (each individual amine))	-	600	-
Cl-5.3.6 (IS 17011, Table-1 (iv)(Chromium (VI))	-	700	-
Cl-5.3.6 (IS 17011, Table-1 (v)(Dimethyl fumarate (DMFU))	-	800	-
Cl-5.3.6 (IS 17011, Table-1 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	700	-
Cl-5.3.6 (IS 17011, Table-1 (vii)(Formaldehyde)	-	700	-
Cl-5.3.6 (IS 17011, Table-1 (v)(Dimethyl fumarate (DMFU))	-	700	-
Cl-5.3.6 (IS 17011, Table-1 (vi)(Formaldehyde (free or released by partial hydrolysis))	-	700	-
Cl-5.3.6 (IS 17011, Table-1 (vii)(Formaldehyde)	-	800	-
Cl-5.3.6 (IS 17011, Table-1 (viii)(Organotin compounds)	-	800	-
Cl-5.3.6 (IS 17011, Table-1 (ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl-5.3.6 (IS 17011, Table-1 (x)(pH)	-	500	-
Cl-5.3.6 (IS 17011, Table-1 (xi)(Phthalates (each individual phthalate))	-	800	-
Cl-5.3.6 (IS 17011, Table-1 (xii)(Nickel, on skin contact)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	800	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	1000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	1000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	1000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	1000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	1000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	1000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	1000	-
Cl.1.4.1 of IS 17011(DMFU)	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(Chromium (VI))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	1000	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1000	-
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	1000	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	1000	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	1000	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	1000	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	1000	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	1000	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	1000	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	1000	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	1000	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	1000	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	1000	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	1000	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	1000	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	1000	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	1000	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	1000	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	1000	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	1000	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	1000	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	1000	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	1000	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	1000	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	1000	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	1000	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	1000	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	1000	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	1000	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	1000	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes :Disperse yellow 23)	-	1000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	1000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	1000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	1000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	1000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	1000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	1000	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	1000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	1000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresidine)	-	1000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	1000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	1000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	1000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	1000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	1000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	1000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	1000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	1000	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-

-
-

IS 2494 : Part 1 (1994)

V - Belts - Endless V - Belts for industrial purposes: Part 1 general purpose - Specification (Second Revision)

ALL

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.0(Marking)	-	16500	-
10.1(Elongation)	-	16500	-
10.1(Tensile Strength)	-	16500	-
8.0(Transmitting Capacities)	-	16500	-
7.2.2(Matched Belts - Code)	-	16500	-
7.2.1(Matched Belts - Difference)	-	16500	-
7.1(Belt Pitch Length)	-	16500	-
6.0(Designation)	-	16500	-
5 Table 2B(Cross sectional dimension)	-	16500	-
5 Table 2B(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 2A(Cross sectional dimension)	-	16500	-
5 Table 1(Cross sectional dimension)	-	16500	-
5 Table 1(Cross sectional dimension)	-	16500	-
5 Table 1(Cross sectional dimension)	-	16500	-
5 Table 1(Cross sectional dimension)	-	16500	-
4.1(Material and Workmanship)	-	16500	-
4.1(Material -Reinforcing polyester cord/fabric of the V-belts)	-	16500	-
4.1(Material and Workmanship)	-	16500	-
7.2(Test Matched Belts)	-	16500	-
5 & 11(Test Belt ride position of top surface of belt with respect to top of pully groove.)	-	16500	-
Clause 5 Table 1(Nominal Pitch Width (Wp))	-	16500	-
Clause 5 Table 1(Nominal Height (T))	-	16500	-
Clause 5 Table 1(Nominal Included Angle (A))	-	16500	-
Clause 5 Table 1(Nominal Pitch Width (W))	-	16500	-
Cl-4.3(Presence of polychloroprene rubber on outside jacket of V-belt)	-	16500	-

-
Included w.e.f-18.12.2025

IS 1381 : Part 1 (2003)

Laboratory glassware - Narrow - Necked boiling flasks (Second Revision)

all

9500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3, 4(Type of Flask)	-	1000	-
3.1, 4.1(Series of Nominal Capacity)	-	1000	-
3.2, 4.2(Nominal Capacity )	-	1000	-
3.3, 4.3(Material )	-	1000	-
3.4, 3.4.1 & 4.4, 4.4.1(Construction- a) Stability )	-	1000	-
3.4, 3.4.2 & 4.4, 4.4.2(Construction- b) Neck )	-	1000	-
3.5, 4.5(Dimensions (in mm) (Table 1&2))	-	1000	-
3.5.2(Neck Length)	-	1000	-
3.5.3, 4.5.2(Dimensions of base )	-	1000	-
3.5.4, 4.5.3(Wall thickness)	-	1000	-
5(Marking )	-	1000	-

-
Included w.e.f 05.01.2026

IS 15298 : Part 3 (2019)

Personal protective equipment: Part 3 protective footwear (Second Revision)

ALL

58000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2 Table-2(Height of upper)	-	500	-
5.2.3 Table-2(Seat Region)	-	500	-
5.3.1.1 Table-2(Construction)	-	600	-
5.3.1.2 Table-2(Upper/Outsole Bond)	-	500	-
Table-2(Strength)	-	500	-
5.3.2.1 Table-2(General)	-	500	-
5.3.2.2 Table-2(Internal Length of toe cap)	-	500	-
5.3.2.3 Table-2(Impact Resistance -T- )	-	600	-
5.3.2.4 Table-2(Compression)	-	600	-
5.3.2.5 Table-2(Behaviour of toe cap)	-	600	-
5.3.3 Table-2(Leak Proofness)	-	600	-
5.3.4 Table-2(Specific Ergonomic)	-	600	-
Table-2(Features)	-	700	-
5.3.5.2 Table-2(Slip Resistance SRA)	-	1000	-
5.3.5.3 Table-2(Slip Resistance SRB)	-	1000	-
Table-2(0.18)	-	500	-
5.3.5.4 Table-2(Slip Resistance SRC)	-	1000	-
5.4.1 Table-2(General)	-	500	-
5.4.2 Table-2(Thickness)	-	500	-
5 4 3 Table-2(Tear Strength)	-	800	-
5.4.4 Table-2(Tensile Properties)	-	800	-
5.4.5 Table-2(Flexing Resistance)	-	800	-
5.4.6 Table-2(Water Vapour Permeability & Coefficient)	-	900	-
5 4.7 Table-2( )	-	700	-
5 4.8 Table-2(Hydrolysis)	-	700	-
5.4 9 Table-2(Chrome VI)	-	700	-
5.5.1 Table-2(Tear Strength)	-	700	-
5.5.2 Table-2(Abrasion Resistance)	-	600	-
5.5.3 Table-2(Water Vapour Permeability & Coefficient)	-	700	-
5.5.4 Table-2(pH Value)	-	500	-
5.5.5 Table-2(Chrome VI)	-	1000	-
5.6.1 Table-2(Tear Strength)	-	700	-
5.6.2 Table-2(pH Value)	-	500	-
5.6.3 Table-2(Chromium VI)	-	700	-
5.7.1 Table-3(Thickness)	-	500	-
5.7.2 Table-3(pH Value)	-	500	-
5.7.3 Table-3(Water Absorption &)	-	700	-
Table-3(Desorption)	-	600	-
5.7.4.1 Table-3(Insole Abrasion)	-	700	-
5.7.4.2 Table-3(Abrasion)	-	600	-
5.7.5 Table-3(Chromium VI)	-	1000	-
5.8.1 Table-2(Design)	-	700	-
5.8.2 Table-2(Tear Strength)	-	700	-
5.8.3 Table-3(Abrasion Resistance)	-	700	-
5.8.4 Table-3(Flexing Resistance)	-	700	-
5.8.5 Table-3(Hydrolysis)	-	600	-
5.8.6 Table-2(Interlayer BondStrength)	-	600	-
6.2.1 Table-I8(Penetration Resistance)	-	700	-
6.2.2.1 Table-18(Electrical Properties)	-	700	-
Table-18(Conductive Footwear)	-	700	-
6.2.2.2 Table-18(Antistatic Footwear)	-	600	-
6.2.2.3 Table-18(Electrically Insulated)	-	700	-
6.2.3.1 Table-18(Heat Insulated Comp)	-	800	-
6.2.3.2 Table-18(Cold Insulated)	-	700	-
6.2.4 Table-18(Energy Absorption of seat region)	-	800	-
6.2.5 Table-18(Water Resistance)	-	700	-
6.2.7 Table-18(Ankle Protection)	-	0	-
6.2.8 Table-18(Cut Resistance)	-	800	-
6.3 Table-18(Water Penetration & Absorption)	-	800	-
6.4.1 Table-18(Resistance to Hot Contact)	-	1000	-
Cl.4, Table1, Annex A ISO 20344 :2011(Classification and designs)	-	1000	-
Cl. 5,Cl.5.1Table 2, Table 3(General)	-	700	-
Cl. 5.2, Cl.5.2.1, Figure 3,(General)	-	600	-
Cl.5.3.5.1, Cl.5.3.5.2,Cl.5.3.5.3 or 5.3.5.4 IS 15298 (Part1):2015,ISO 20344:2011,5.11(General)	-	1500	-
Cl.7, table 2,table 18,table 20, table21, EN 13832-1,EN 13832-3: 2006,6.2.2.3(Electrically insulating footwear)	-	1500	-
8(Information to be supplied)	-	1000	-
Cl.8.1 IS 15298 Part 3:2018, ISO 20346 :2014(General)	-	1500	-
8.2(Electrical properties)	-	1200	-
8.2.1(Conductive footwear)	-	700	-
8.2.2(Antistatic footwear)	-	600	-
8.3(Insocks)	-	800	-
Cl.5.8.1.3(Cleat Height)	-	700	-
Cl.5.8.1.2(Cleated area)	-	800	-
Cl.5.8.1.1(Table 17 Thickness)	-	600	-
Cl. 6.2.6 Table 18(Metatarsal Protection)	-	700	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	1500	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	1500	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	1500	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	1300	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	1500	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	1200	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	1200	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	1200	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	1200	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	1200	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	1300	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	1300	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	1300	-
Cl.1.4.1 of IS 17011(DMFU)	-	1800	-
Cl. No.8.6.1,Table 1 of IS 17011(Chromium)	-	1800	-
Cl. No.8.6.1,Table 1 of IS 17011(Formaldehyde (free or released by partial hydrolysis))	-	1700	-
Cl. No.8.6.1,Table 1 of IS 17011(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	1200	-
Cl.8 - Table No 1(Lead Content (as Pb) (applicable for PVC only) - IS 12240 (Part 5) : 1988)	-	1200	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	1300	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	1200	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	1300	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	1500	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	1200	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	1300	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	1500	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	1500	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	1500	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	1600	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	1700	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	1400	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	1500	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	1500	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	1300	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	1500	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	1300	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	1500	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	1200	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	1500	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	1300	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	1400	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	1200	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	1400	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	1200	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	1200	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	1400	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes :Disperse yellow 23)	-	1200	-
Cl.4.1 (Table B-1 Sl I)(Personal protective equipment: Part 3 protective footwear (Second Revision))	-	1000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	1000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	1100	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	1100	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	1200	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	1400	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	1300	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	1400	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	1400	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	1200	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	1300	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	1500	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	1400	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresidine)	-	1300	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	1400	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	1500	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	1500	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	1500	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	1300	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	1400	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	1200	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	1600	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	1400	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
6.4.2 Table-18(Resistance to Fuel oil)	-	1500	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	1200	-

-
-

IS 5852 : Part 2 (2019)

Toe Caps for Protection of Feet Ã¢â‚¬â€ Specification Part 2 Non-Metallic Toe Caps

ALL

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.1(Internal length)	-	500	-
4.3.2(Width of flange)	-	500	-
4.4(Impact resistance)	-	1000	-
4.5(Compression resistance)	-	1000	-
5.5.2(Effect of high temperature)	-	1500	-
5.5.3(Effect of low temperature)	-	1500	-
5.5.4(Effect of fuel oil)	-	1500	-
6(Marking)	-	500	-
4.3.1(Internal length)	-	-	-
4.3.2(Width of flange)	-	-	-
4.4(Impact resistance)	-	-	-
4.5(Compression resistance)	-	-	-
5.5.2(Effect of high temperature)	-	-	-
5.5.3(Effect of low temperature)	-	-	-
5.5.4(Effect of fuel oil)	-	-	-
6(Marking)	-	-	-

-
Included w.e.f 12.11.2025

IS 5852 : Part 1 (2019)

Toe caps for protection of feet - Specification: Part 1 metallic toe caps (Fifth Revision)

ALL

3000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	500	-
4/4.1(REQUIREMENTS- Finishing)	-	500	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	500	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	1000	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	1000	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	1200	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	500	-
4/4.1(REQUIREMENTS- Finishing)	-	500	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	500	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	1000	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	1200	-
4/4.2/4.2.2-see Fig B-1(REQUIREMENTS- Dimensions-Width of Flange- as par Annex B.)	-	500	-
4/4.1(REQUIREMENTS- Finishing)	-	500	-
4/4.2/4.2.1-Table1(REQUIREMENTS- Dimensions-Internal Length- as par Annex A)	-	500	-
4/4.3- Table 2.(REQUIREMENTS-Impact Resistance- as par Annex C)	-	1200	-
4/4.4- Table 2.(REQUIREMENTS-Compression Resistance- as par Annex D)	-	1200	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	1500	-
4.1(Finishing)	-	500	-
4.2.1 - 1(Minimum internal length in mm)	-	500	-
4.2.2(Width of Flange)	-	500	-
4.3(Impact Resistance)	-	1000	-
4.4(Compression Resistance)	-	1000	-
4.5(Corrosion Resistance)	-	1500	-
5(Marking)	-	500	-
6(Packing)	-	500	-
4/4.5(REQUIREMENTS-Corrosion Resistance- as par Annex E)	-	1500	-

-
Included w.e.f 08.12.2025

IS 17012 (2018)

High ankle tactical boots with pu - Rubber sole - Specification

ALL

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.0(Innocuousness Test IS 17011)	-	1200	-
4.16.2(Breaking Strength of lace )	-	1000	-
4.16.1(Length of lace )	-	1000	-
4.15(D-ring & Hooks )	-	700	-
6.1(Resistance to Fuel Oil)	-	1200	-
4.14.9(Resistance to hot contact )	-	1200	-
4.14.8(Flexing resistance )	-	1200	-
4.14.7(Ageing test)	-	1000	-
4.14.6(Hardness (IRHD))	-	600	-
4.14.5(Abrasion resistance )	-	800	-
4.14.4(Tear Strength)	-	800	-
4.14.3(Sole Density )	-	700	-
4.14.2(Thickness)	-	500	-
4.14.1(Material)	-	500	-
4.13(Breaking Strength of thread )	-	700	-
4.12.2(Tear Strength)	-	900	-
4.12.1(Thickness )	-	500	-
4.11.2(Tear Strength)	-	1000	-
4.11.1(Thickness )	-	500	-
4.10.3(Water absorption & desorption percent)	-	900	-
4.10.2(Abrasion resistance )	-	1000	-
4.10.1(Material)	-	700	-
4.9.3(Water absorption & desorption percent)	-	600	-
4.9.2(Abrasion resistance )	-	700	-
4.9.1(Thickness)	-	500	-
4.8(Thickness Toe puff & counter stiffener)	-	1000	-
4.7.5(Water Vapour permeability & coefficient )	-	1200	-
4.7.4(Abrasion resistance )	-	1000	-
4.7.3(Tear Strength)	-	1000	-
4.7.2(Material Counter & Tongue)	-	1000	-
4.7.1(Material vamp & Quarter)	-	1000	-
4.6.3(Water Penetration and water absorption )	-	1000	-
4.6.2(Tear Strength)	-	1100	-
4.6.1(Thickness )	-	500	-
4.5.8(Energy absorption of seat region )	-	1200	-
4.5.7(Cold Insulation of sole complex)	-	1400	-
4.5.6(Heat Insulation of sole Complex)	-	1400	-
4.5.5(Antistatic test)	-	1400	-
4.5.4(Slip Resitance)	-	1300	-
4.5.3.2(Interayer bond strength)	-	1200	-
4.5.3.1(Upper/outsole bond strength)	-	1300	-
4.5.2(Ergonomic Feature)	-	1200	-
4.5.1(Construction)	-	1000	-
4.4(Height of upper )	-	700	-
4.3.2(Weight)	-	800	-
4.3.1(Size)	-	700	-
4.2(Design )	-	900	-
Cl. 6, Cl.6.1, 6.1.1 & 6.1.2, 8.6 of IS 15298 part 1,ISO 1817,ISO 4643,(Resistance to fuel oil)	-	1400	-
8, 8.1, 8.2, 8.2.1(Marking)	-	500	-
9(Information to be Supplied)	-	1000	-
Cl.4.6.4(Water Penetration and Water Absorption)	-	1200	-
Cl. 6, Cl.6.1, 6.1.1 & 6.1.2,(Resistance to fuel oil)	-	1400	-
CL.8,8.1, 8.2,8.2.1(Marking)	-	1000	-
Cl.9,(Information to be Supplied)	-	1200	-

-
Included w.e.f 08.12.2025

IS 13995 (1995)

Unlined moulded rubber boots - Specification

ALL

5000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.7(Size)	-	500	-
5.1.6(Design)	-	500	-
5.1.5(Flexing resistance of upper)	-	1000	-
5.1.4(Resistance to dry heat ageing )	-	1000	-
5.1.3(Tear Strength)	-	1000	-
5.1.2(Tensile Strength (after ageing))	-	1000	-
5.1.1(Tensile Strength (before ageing))	-	1000	-
4.1(Thickness )	-	500	-
6, 6.1(Marking)	-	500	-
Cl.6, 6.1(Marking)	-	500	-

-
Included w.e.f 08.12.2025

IS 15844 : Part 1 (2023)

SPORTS FOOTWEAR PART -1 GENERAL PURPOSEFirst Revision

ALL

65000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl No.4.1(Sampling and Conditioning)	-	300	-
Cl No.4.2(Construction)	-	300	-
Cl No.4.3(Whole Footwear)	-	400	-
4.3.1(Insole)	-	400	-
4.3.2(Toe spring height)	-	300	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	300	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	400	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	400	-
4.3.6(Energy Absorption at Seat Region)	-	400	-
4.3.7(Complete Shoe Flexing)	-	300	-
4.3.8(Washability)	-	400	-
4.3.9(Slip Resistance)	-	400	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	500	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	500	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	500	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	500	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	400	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	400	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	400	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	400	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	500	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	500	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	500	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	500	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	500	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	500	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	500	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	500	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	500	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	500	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	400	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	400	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	400	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	400	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	300	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	400	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	400	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	400	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	400	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	300	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	400	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	400	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	400	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	400	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	500	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	500	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	500	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	400	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	400	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	400	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	400	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	400	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	400	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	400	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	500	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	500	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	500	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	500	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	500	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	1000	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	1000	-
Cl No . 5(MARKING AND PACKING)	-	300	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	500	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	700	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	600	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	700	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	700	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	800	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	700	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	700	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	1000	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	500	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	500	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	700	-
Clause 4.2 - 4.2.1(Construction)	-	600	-
Clause 4.2 - 4.2.2(Construction)	-	400	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	400	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	400	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	400	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	400	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	400	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	500	-
Clause 4.4, Table 1 ii)(Tear strength)	-	500	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	500	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	500	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	500	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	500	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	500	-
Clause 4.4, Table 2 iii)(Tear strength)	-	500	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	500	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	500	-
Clause 4.5, Table 3 i)(Tear strength)	-	500	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	500	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	500	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	400	-
Clause 4.6, Table 4 i)(Thickness)	-	400	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	500	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	500	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	500	-
Clause 4.7, Table 5 i)(Thickness)	-	400	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	500	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	400	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	400	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	500	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	700	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	700	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	500	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	500	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	600	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	600	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	700	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	700	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	700	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	700	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	820	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	800	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	700	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	700	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	1000	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	1100	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	1000	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	1000	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	1000	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	700	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	500	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	1000	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	1000	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	1000	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	1000	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	1000	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	1000	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	1000	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	1000	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	1000	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	1000	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	1000	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	700	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	700	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	800	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	1000	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	1000	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	1000	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	1000	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	700	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	500	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	400	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	500	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	700	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	700	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	600	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	700	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	700	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	500	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	700	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	800	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	700	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	500	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	500	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	1000	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	1000	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	1000	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	1000	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	1000	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	1000	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	1000	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	1000	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	1000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	1200	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	1100	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	1200	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	1100	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	1300	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	1200	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	1200	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	1100	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	1100	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	1200	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	1000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	1200	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	1100	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	1100	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	1200	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	1200	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	1300	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	1300	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	1300	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	1000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	1200	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	1100	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	1200	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	1100	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	1200	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	1300	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	1250	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	1200	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	1300	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	1200	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	1200	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	1200	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	1400	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	1300	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	1500	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	1300	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	1300	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	1200	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	1200	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	1400	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	1400	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	1300	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	1400	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	1400	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	1500	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	1400	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	1500	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	1500	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	1500	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	1400	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	1400	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	1300	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	1400	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	1500	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	1400	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	1500	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	1500	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	1400	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	1500	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	1600	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	1500	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	1500	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	1400	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	1400	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	1500	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	1500	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	1420	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	1450	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	1400	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	1100	-
Cl No.4.1(Sampling and Conditioning)	-	500	-
Cl No.4.2(Construction)	-	500	-
Cl No.4.3(Whole Footwear)	-	500	-
4.3.1(Insole)	-	700	-
4.3.2(Toe spring height)	-	600	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	500	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	700	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	600	-
4.3.6(Energy Absorption at Seat Region)	-	700	-
4.3.7(Complete Shoe Flexing)	-	600	-
4.3.8(Washability)	-	700	-
4.3.9(Slip Resistance)	-	700	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	700	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	600	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	700	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	700	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	600	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	600	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	700	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	700	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	700	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	700	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	700	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	500	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	500	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	600	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	600	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	500	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	600	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	600	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	500	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	700	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	600	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	700	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	700	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	600	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	500	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	500	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	600	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	500	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	600	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	600	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	700	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	600	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	600	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	500	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	600	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	622	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	700	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	600	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	500	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	700	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	600	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	700	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	600	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	700	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	700	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	700	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	700	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	600	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	600	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	500	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	500	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	600	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	500	-
Cl No . 5(MARKING AND PACKING)	-	600	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	500	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	600	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	500	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	700	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	700	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	700	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	700	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	700	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	600	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	500	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	600	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	700	-
Clause 4.2 - 4.2.1(Construction)	-	500	-
Clause 4.2 - 4.2.2(Construction)	-	500	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	500	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	500	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	600	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	600	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	600	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	700	-
Clause 4.4, Table 1 ii)(Tear strength)	-	600	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	600	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	500	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	600	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	700	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	600	-
Clause 4.4, Table 2 iii)(Tear strength)	-	600	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	500	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	700	-
Clause 4.5, Table 3 i)(Tear strength)	-	500	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	500	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	500	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	600	-
Clause 4.6, Table 4 i)(Thickness)	-	500	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	500	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	700	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	700	-
Clause 4.7, Table 5 i)(Thickness)	-	500	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	500	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	500	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	700	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	700	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	500	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	700	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	700	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	700	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	700	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	500	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	600	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	700	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	700	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	700	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	700	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	700	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	500	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	500	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	500	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	500	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	500	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	500	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	500	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	500	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	500	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	500	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	500	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	500	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	500	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	600	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	600	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	600	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	600	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	600	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	600	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	600	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	600	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	600	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	600	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	600	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	600	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	600	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	600	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	600	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	600	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	600	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	600	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	600	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	600	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	600	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	600	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	600	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	600	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	600	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	600	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	600	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	600	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	600	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	600	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	600	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	600	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	600	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	600	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	600	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	600	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	600	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	600	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	600	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	600	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	600	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	600	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	600	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	600	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	600	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	600	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	600	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	600	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	600	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	600	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	600	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	600	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	600	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	600	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	600	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	600	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	600	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	600	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	600	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	600	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	600	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	600	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	600	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	600	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	600	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	600	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	600	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	600	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	500	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	500	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	500	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	500	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	600	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	600	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	600	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	500	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	500	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	600	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	500	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	700	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	700	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	700	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	700	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	700	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	700	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	700	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	700	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	700	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	700	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	700	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	700	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	700	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	700	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	700	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	700	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	700	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	700	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	700	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	700	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	700	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	700	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	700	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	700	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	700	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	700	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	700	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	700	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	700	-
Cl No.4.1(Sampling and Conditioning)	-	65000	-
Cl No.4.2(Construction)	-	65000	-
Cl No.4.3(Whole Footwear)	-	65000	-
4.3.1(Insole)	-	65000	-
4.3.2(Toe spring height)	-	65000	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	65000	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	65000	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	65000	-
4.3.6(Energy Absorption at Seat Region)	-	65000	-
4.3.7(Complete Shoe Flexing)	-	65000	-
4.3.8(Washability)	-	65000	-
4.3.9(Slip Resistance)	-	65000	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	65000	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	65000	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	65000	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	65000	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	65000	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	65000	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	65000	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	65000	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	65000	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	65000	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	65000	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	65000	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	65000	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	65000	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	65000	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	65000	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	65000	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	65000	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	65000	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	65000	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	65000	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	65000	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	65000	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	65000	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	65000	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	65000	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	65000	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	65000	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	65000	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	65000	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	65000	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	65000	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	65000	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	65000	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	65000	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	65000	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	65000	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	65000	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	65000	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	65000	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	65000	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	65000	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	65000	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	65000	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	65000	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	65000	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	65000	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	65000	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	65000	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	65000	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	65000	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	65000	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	65000	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	65000	-
Cl No . 5(MARKING AND PACKING)	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	65000	-
Clause 4.2 - 4.2.1(Construction)	-	65000	-
Clause 4.2 - 4.2.2(Construction)	-	65000	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	65000	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	65000	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	65000	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	65000	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	65000	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	65000	-
Clause 4.4, Table 1 ii)(Tear strength)	-	65000	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	65000	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	65000	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	65000	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	65000	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	65000	-
Clause 4.4, Table 2 iii)(Tear strength)	-	65000	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	65000	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	65000	-
Clause 4.5, Table 3 i)(Tear strength)	-	65000	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	65000	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	65000	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	65000	-
Clause 4.6, Table 4 i)(Thickness)	-	65000	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	65000	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	65000	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	65000	-
Clause 4.7, Table 5 i)(Thickness)	-	65000	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	65000	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	65000	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	65000	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	65000	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	65000	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	65000	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	65000	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	65000	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	65000	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	65000	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	65000	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	65000	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	65000	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	65000	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	65000	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	65000	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	65000	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	65000	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	65000	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	65000	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	65000	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	65000	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	65000	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	65000	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	65000	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	65000	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	65000	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	65000	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	65000	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	65000	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	65000	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	65000	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	65000	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	65000	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	65000	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	65000	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	65000	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	65000	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	65000	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	65000	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	65000	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	65000	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	65000	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	65000	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	65000	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	65000	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	65000	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	65000	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	65000	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	65000	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	65000	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	65000	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	65000	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	65000	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	65000	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	65000	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	65000	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	65000	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	65000	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	65000	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	65000	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	65000	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	65000	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	65000	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	65000	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	65000	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	65000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	65000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	65000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	65000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	65000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	65000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	65000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	65000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	65000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	65000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	65000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	65000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	65000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	65000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	65000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	65000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	65000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	65000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	65000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	65000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	65000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	65000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	65000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	65000	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	65000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	65000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	65000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	65000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	65000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	65000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	65000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	65000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	65000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	65000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	65000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	65000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	65000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	65000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	65000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	65000	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	65000	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	65000	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	65000	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	65000	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	65000	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	65000	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	65000	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	65000	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	65000	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	65000	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	65000	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	65000	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	65000	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	65000	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	65000	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	65000	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	65000	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	65000	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	65000	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	65000	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	65000	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	65000	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	65000	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	65000	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	65000	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	65000	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	65000	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	65000	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	65000	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	65000	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	65000	-
Cl No.4.1(Sampling and Conditioning)	-	65000	-
Cl No.4.2(Construction)	-	65000	-
Cl No.4.3(Whole Footwear)	-	65000	-
4.3.1(Insole)	-	65000	-
4.3.2(Toe spring height)	-	65000	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	65000	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	65000	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	65000	-
4.3.6(Energy Absorption at Seat Region)	-	65000	-
4.3.7(Complete Shoe Flexing)	-	65000	-
4.3.8(Washability)	-	65000	-
4.3.9(Slip Resistance)	-	65000	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	65000	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	65000	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	65000	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	65000	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	65000	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	65000	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	65000	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	65000	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	65000	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	65000	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	65000	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	65000	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	65000	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	65000	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	65000	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	65000	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	65000	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	65000	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	65000	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	65000	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	65000	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	65000	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	65000	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	65000	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	65000	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	65000	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	65000	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	65000	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	65000	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	65000	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	65000	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	65000	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	65000	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	65000	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	65000	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	65000	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	65000	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	65000	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	65000	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	65000	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	65000	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	65000	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	65000	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	65000	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	65000	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	65000	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	65000	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	65000	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	65000	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	65000	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	65000	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	65000	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	65000	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	65000	-
Cl No . 5(MARKING AND PACKING)	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	65000	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	65000	-
Clause 4.2 - 4.2.1(Construction)	-	65000	-
Clause 4.2 - 4.2.2(Construction)	-	65000	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	65000	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	65000	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	65000	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	65000	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	65000	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	65000	-
Clause 4.4, Table 1 ii)(Tear strength)	-	65000	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	65000	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	65000	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	65000	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	65000	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	65000	-
Clause 4.4, Table 2 iii)(Tear strength)	-	65000	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	65000	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	65000	-
Clause 4.5, Table 3 i)(Tear strength)	-	65000	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	65000	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	65000	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	65000	-
Clause 4.6, Table 4 i)(Thickness)	-	65000	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	65000	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	65000	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	65000	-
Clause 4.7, Table 5 i)(Thickness)	-	65000	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	65000	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	65000	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	65000	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	65000	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	65000	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	65000	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	65000	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	65000	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	65000	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	65000	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	65000	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	65000	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	65000	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	65000	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	65000	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	65000	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	65000	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	65000	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	65000	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	65000	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	65000	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	65000	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	65000	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	65000	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	65000	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	65000	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	65000	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	65000	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	65000	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	65000	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	65000	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	65000	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	65000	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	65000	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	65000	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	65000	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	65000	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	65000	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	65000	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	65000	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	65000	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	65000	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	65000	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	65000	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	65000	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	65000	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	65000	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	65000	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	65000	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	65000	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	65000	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	65000	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	65000	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	65000	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	65000	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	65000	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	65000	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	65000	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	65000	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	65000	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	65000	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	65000	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	65000	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	65000	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	65000	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	65000	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	65000	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	65000	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	65000	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	65000	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	65000	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	65000	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	65000	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	65000	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	65000	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	65000	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	65000	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	65000	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	65000	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	65000	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	65000	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	65000	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	65000	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	65000	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	65000	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	65000	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	65000	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	65000	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	65000	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	65000	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	65000	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	65000	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	65000	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	65000	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	65000	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	65000	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	65000	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	65000	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	65000	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	65000	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	65000	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	65000	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	65000	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	65000	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	65000	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	65000	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	65000	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	65000	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	65000	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	65000	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	65000	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	65000	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	65000	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	65000	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	65000	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	65000	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	65000	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	65000	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	65000	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	65000	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	65000	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	65000	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	65000	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	65000	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	65000	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	65000	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	65000	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	65000	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	65000	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	65000	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	65000	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	65000	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	65000	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	65000	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	65000	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	65000	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	65000	-
Cl No.4.1(Sampling and Conditioning)	-	-	-
Cl No.4.2(Construction)	-	-	-
Cl No.4.3(Whole Footwear)	-	-	-
4.3.1(Insole)	-	-	-
4.3.2(Toe spring height)	-	-	-
4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	-	-
4.3.4("Upper to Composite Sole Bond Performance (Applicable Only When the Sole is Composite)")	-	-	-
4.3.5(Out Sole to Mid Sole (Multilayer) Bond Performance)	-	-	-
4.3.6(Energy Absorption at Seat Region)	-	-	-
4.3.7(Complete Shoe Flexing)	-	-	-
4.3.8(Washability)	-	-	-
4.3.9(Slip Resistance)	-	-	-
Cl No.4.4 , Table No. 2 , i) , a)(Flexing resistance, Dry condition)	-	-	-
Cl No.4.4 , Table No. 2 , i) , b)(Flexing resistance, Wet condition)	-	-	-
Cl No.4.4 , Table No. 2 , ii)(Tear strength (average force), Min, N)	-	-	-
Cl No.4.4 , Table No. 2 , iii) , a)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Dry: (rubbing) Rating: (Marring and staining) ")	-	-	-
Cl No.4.4 , Table No. 2 , iii) , b)("Colour fastness rubbing (To and fro) Grey scale rate, Min , Wet: (rubbing) Rating: (Marring and staining)")	-	-	-
Cl No.4.4 , Table No. 2 , iv) , a)(Water vapour permeability, mg/cm2h, Min)	-	-	-
Cl No.4.4 , Table No. 2 , iv) , b)(Water vapour coefficient, mg/cm2 , Min)	-	-	-
Cl No.4.4 , Table No. 2 , v)(Stitch tear strength (double hole), N/mm, Min)	-	-	-
Cl No.4.4 , Table No. 2 , vi)("Colour fastness to light (Optional) Grey scale rate, Min Rating: (Marring)")	-	-	-
Cl No.4.4 , Table No. 2 , i)(Breaking strength, N/mm, Min)	-	-	-
Cl No.4.4 , Table No. 2 , ii)(Elongation at break, percent Min)	-	-	-
Cl No.4.4 , Table No. 2 , iii)(Tear strength, N, Min For Fabric: For all other materials)	-	-	-
Cl No.4.4 , Table No. 2 , iv) , a)(Flexing resistance, Dry condition)	-	-	-
Cl No.4.4 , Table No. 2 , iv) , b)(Flexing resistance, ,Wet condition)	-	-	-
Cl No.4.4 , Table No. 2 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	-	-
Cl No.4.4 , Table No. 2 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	-	-
Cl No.4.4 , Table No. 2 , vi)(Hydrolysis resistance)	-	-	-
Cl No.4.4 , Table No. 2 , vii)(Bursting Strength, kg/cm2 , Min)	-	-	-
Cl No.4.5 , Table No. 3 , i)(Tear strength, N, Min)	-	-	-
Cl No.4.5 , Table No. 3 , ii)(Abrasion resistance, cycles)	-	-	-
Cl No.4.5 , Table No. 3 , iii)("Colour fastness to rubbing (crocking), Grey scale rate with 10 rubs on dry or wet, Min")	-	-	-
Cl No.4.5 , Table No. 3 , iv)("Colour fastness to perspiration (contact method) Grey scale rate, Min")	-	-	-
Cl No.4.5 , Table No. 3 , v) , a)(Water vapour permeability, mg/cm2h, Min)	-	-	-
Cl No.4.5 , Table No. 3 , v) , b)("Water vapour coefficient, mg/cm2 , Min ")	-	-	-
Cl No.4.6 , Table No. 4 , i)(Thickness, mm, Min)	-	-	-
Cl No.4.6 , Table No. 4 , ii)(Flexing index, Min)	-	-	-
Cl No.4.6 , Table No. 4 , iii)(Abrasion resistance, at 400 cycles)	-	-	-
Cl No.4.6 , Table No. 4 , iv) , a)(Water Absorption, mg/cm2 , Min)	-	-	-
Cl No.4.6 , Table No. 4 , iv) , b)(Water Desorption, percent, Min)	-	-	-
Cl No.4.7, Table No. 5 , i)(Thickness, mm, Min)	-	-	-
Cl No.4.7, Table No. 5 , ii)(Abrasion resistance, cycles)	-	-	-
Cl No.4.7, Table No. 5 , iii) , a)(Water Absorption, mg/cm2 , Min)	-	-	-
Cl No.4.7, Table No. 5 , iii) , b)(Water Desorption, percent, Min)	-	-	-
Cl No.4.8 , Table No. 6 , i)(Abrasion resistance (Volume loss), mm3 , Max)	-	-	-
Cl No.4.8 , Table No. 6 , ii)("Flexing resistance Belt Method at 90 diameter Mandrel or Bennewart method, cut growth, Max")	-	-	-
Cl No.4.8 , Table No. 6 , iii)("Hydrolysis resistance, cut growth after 150 000 flexes, in mm, Max")	-	-	-
Cl No.4.9 , Table No. 7 , i)(Compression set, percent, Max)	-	-	-
Cl No.4.9 , Table No. 7 , ii)(Split tear strength, kg/25 mm, Min)	-	-	-
Cl No.4.9 , Table No. 7 , iii)(Heat shrinkage, percent, Max)	-	-	-
Cl No.4.10 , Table No. 8 , i)(First dry collapsing load, hardness, N, Min)	-	-	-
Cl No.4.10 , Table No. 8 , ii)(Resilience, percent, Min)	-	-	-
Cl No.4.10 , Table No. 8 , iii)(Moisture resistance, percent, Min)	-	-	-
Cl No.4.10 , Table No. 8 , iv) , a)(Initial dry area shape retention, percent, Min)	-	-	-
Cl No.4.10 , Table No. 8 , iv) , b)(Area shape retention after 10th collapse, dry, percent, Min)	-	-	-
Cl No.4.11 , Table No. 9 , i)(Peel strength, N/mm, Min)	-	-	-
Cl No.4.11 , Table No. 9 , ii)(Shear strength, kPa , Min)	-	-	-
Cl No.4.12 , Table No. 10 , i)(Limit of useful extension, percent, Min)	-	-	-
Cl No.4.13 , Table No. 11 , i)(Breaking strength of lace, N, Min)	-	-	-
Cl No.4.13 , Table No. 11 , ii)(Lace tag strength, N, Min)	-	-	-
Cl No.4.13 , Table No. 11 , iii)(Lace to lace abrasion,)	-	-	-
Cl No.4.13 , Table No. 11 , iv)("Colour fastness to water Gray Scale Rate, Min Rating")	-	-	-
Cl No.4.13 , Table No. 11 , v)(Strength of Buckle/Ski hook, N, Min)	-	-	-
Cl No.4.13 , Table No. 11 , vi)(Corrosion resistance)	-	-	-
Cl No . 4.14("Chemical Requirement on Complete Product for all Types of Sports Shoe")	-	-	-
Cl No . 5(MARKING AND PACKING)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(i)(Allergenic and carcinogenic disperse dyes)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(ii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(iii)(Aromatic amines released from Azo dyes (each individual amine))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(iv)(Chromium (VI))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(v)(Dimethyl fumarate (DMFU))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(vi)(Formaldehyde (free or released by partial hydrolysis))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(vii)(Formaldehyde)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(viii)(Organotin compounds)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(ix)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(x)(pH)	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(xi)(Phthalates (each individual phthalate))	-	-	-
Cl No . 4.14, Table no. 1 of IS 17011(xii)(Nickel, on skin contact 2-(thiocyanomethylthio) -benzothiazole (TCMTB))	-	-	-
Clause 4.2 - 4.2.1(Construction)	-	-	-
Clause 4.2 - 4.2.2(Construction)	-	-	-
Clause 4.3 - 4.3.1(Whole Footwear)	-	-	-
Clause 4.3 - 4.3.2(Whole Footwear)	-	-	-
Clause 4.3 - 4.3.3(Upper to Mid Sole/Out Sole Bond Performance)	-	-	-
Clause 4.3 - 4.3.4(Upper to Composite Sole Bond Performance(Applicable Only When the Sole is Composite))	-	-	-
Clause 4.3 - 4.3.5(Out Sole to Mid Sole (Multilayer) Bond)	-	-	-
Clause 4.3 - 4.3.7(Complete Shoe Flexing)	-	-	-
Clause 4.4, Table 1 ii)(Tear strength)	-	-	-
Clause 4.4, Table 1 iv)-a(Water Vapour Permeability)	-	-	-
Clause 4.4, Table 1 iv)-b(Water Vapour Coeffecient)	-	-	-
Clause 4.4, Table 1 v)(Stitch Tear Strength(Double Hole))	-	-	-
Clause 4.4, Table 2 i)(Breaking Strength)	-	-	-
Clause 4.4, Table 2 ii)(Elongation at break)	-	-	-
Clause 4.4, Table 2 iii)(Tear strength)	-	-	-
Clause 4.4, Table 2 v)-a(Water Vapour Permeability)	-	-	-
Clause 4.4, Table 2 v)-b(Water Vapour Coeffecient)	-	-	-
Clause 4.5, Table 3 i)(Tear strength)	-	-	-
Clause 4.5, Table 3 ii)(Abrasion Resistance)	-	-	-
Clause 4.5, Table 3 v)-a(Water Vapour Permeability)	-	-	-
Clause 4.5, Table 3 v)-b(Water Vapour Coeffecient)	-	-	-
Clause 4.6, Table 4 i)(Thickness)	-	-	-
Clause 4.6, Table 4 ii)(Abrasion Resistance)	-	-	-
Clause 4.6, Table 4 iv)-a(Water Absorption)	-	-	-
Clause 4.6, Table 4 iv)-b(Water Desorption)	-	-	-
Clause 4.7, Table 5 i)(Thickness)	-	-	-
Clause 4.7, Table 5 ii)(Abrasion Resistance)	-	-	-
Clause 4.7, Table 5 iii)-a(Water Absorption)	-	-	-
Clause 4.7, Table 5 iii)-b(Water Desorption)	-	-	-
Clause 4.8, Table 6 i)(Abrasion Resistance)	-	-	-
Clause 4.8, Table 6 ii)(Flexing Resistance)	-	-	-
Clause 4.8, Table 6 iii)(Hydrolysis Resistance)	-	-	-
Clause 4.9, Table 7 ii)(Split Tear strength)	-	-	-
Clause 4.9, Table 7 iii)(Heat shrinkage)	-	-	-
Cl-5, Table -1 S. No-(i) (Amendment No-1)(Insole)	-	-	-
Cl-5, Table -1 S. No- (ii) (Amendment No-1)(Toe spring height)	-	-	-
Cl-5, Table -1 S. No- (iii) (Amendment No-1)("Bond performance (a) Upper to sole/mid sole/composite sole (b) Interlayer bond strength")	-	-	-
Cl-5, Table -1 S. No- (iv) (Amendment No-1)(Energy absorption at seat region)	-	-	-
Cl-5, Table -1 S. No- (v) (Amendment No-1)(Complete shoe flexing)	-	-	-
Cl-5, Table -1 S. No-(vi) (Amendment No-1)(Washability)	-	-	-
Cl-5, Table -1 S. No- (vii) (Amendment No-1)(Slip resistance, coefficient of friction (COF),)	-	-	-
Cl-5, Table -1 S. No- (viii) (Amendment No-1)("Abrasion resistance a-Cellular sole b-Solid sole")	-	-	-
Cl-5, Table -1 S. No- (x) (Amendment No-1)(Chemical requirements)	-	-	-
Cl-5, Table -1 S. No- (xi) (Amendment No-1)(Hydrolysis resistance)	-	-	-
Cl-5, Table -1 S. No- (xii) (Amendment No-1)(Lead content)	-	-	-
Cl-6, Table -2 S. No- (i) (Amendment No-1)(Tear strength)	-	-	-
Cl-6, Table -2 S. No- (ii) (Amendment No-1)("Colour fastness rubbing a-Dry: (rubbing) b-Wet: (rubbing)")	-	-	-
Cl-6, Table -2 S. No- (iii), a) (Amendment No-1)(Water vapour permeability)	-	-	-
Cl-6, Table -2 S. No- (iii), b) (Amendment No-1)(Water vapour coefficient)	-	-	-
Cl-6, Table -2 S. No- (iv),(Amendment No-1)(Stitch tear strength)	-	-	-
Cl-6, Table -2 S. No- (v),(Amendment No-1)(Colour fastness to light grey scale rate,)	-	-	-
Cl-6, Table -3 S. No- (i),(Amendment No-1)(Breaking strength, N/mm, Min)	-	-	-
Cl-6, Table -3 S. No- (ii),(Amendment No-1)("Elongation at break a-Tighter direction b-Stretch direction")	-	-	-
Cl-6, Table -3 S. No- (iii),(Amendment No-1)("Tear strength, N, Min a) For fabric b) For all other materials")	-	-	-
Cl-6, Table -3 S. No- (iv),(Amendment No-1)("Flexing resistance a- Dry condition b-Wet condition")	-	-	-
Cl-6, Table -3 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	-	-
Cl-6, Table -3 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	-	-
Cl-6, Table -3 S. No- (vi), (Amendment No-1)(Hydrolysis resistance)	-	-	-
Cl-6, Table -3 S. No- (vii), (Amendment No-1)(Bursting strength)	-	-	-
Cl-6, Table -4 S. No- (i),(Amendment No-1)(Tear strength, N, Min)	-	-	-
Cl-6, Table -4 S. No- (ii),(Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	-	-
Cl-6, Table -4 S. No- (iii),(Amendment No-1)(Colour fastness to rubbing , grey scale rate with 10 rubs on dry or wet, Min)	-	-	-
Cl-6, Table -4 S. No- (iv),(Amendment No-1)(Colour fastness to perspiration)	-	-	-
Cl-6, Table -4 S. No- (v), a (Amendment No-1)(Water vapour permeability)	-	-	-
Cl-6, Table -4 S. No- (v), b (Amendment No-1)(Water vapour coefficient)	-	-	-
Cl-6, Table -5 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	-	-
Cl-6, Table -5 S. No-(ii), (Amendment No-1)(Flexing index, Min)	-	-	-
Cl-6, Table -5 S. No-(iii), (Amendment No-1)(Abrasion resistance,)	-	-	-
Cl-6, Table -5 S. No- (iv), a (Amendment No-1)(Water absorption)	-	-	-
Cl-6, Table -6 S. No- (i), (Amendment No-1)(Thickness, mm, Min)	-	-	-
Cl-6, Table -6 S. No- (ii), (Amendment No-1)("Abrasion resistance, cycles a- Dry condition b-Wet condition")	-	-	-
Cl-6, Table -6 S. No- (iii),a (Amendment No-1)(Water absorption)	-	-	-
Cl-6, Table -6 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	-	-
Cl-6, Table -7 S. No- (i), (Amendment No-1)(Flexing resistance (Belt method or Bennewart method))	-	-	-
Cl-6, Table -7 S. No- (ii), (Amendment No-1)(Hydrolysis resistance, cut growth after flexes)	-	-	-
Cl-6, Table -8 S. No- (i), (Amendment No-1)("Compression set, percent, Max a) For EVA b) For all other materials")	-	-	-
Cl-6, Table -8 S. No- (ii), (Amendment No-1)(Split tear strength)	-	-	-
Cl-6, Table -8 S. No- (iii), (Amendment No-1)(Heat shrinkage)	-	-	-
Cl-6, Table -9 S. No- (i), (Amendment No-1)(First dry collapsing load, hardness)	-	-	-
Cl-6, Table -9 S. No- (ii), (Amendment No-1)(Resilience, percent)	-	-	-
Cl-6, Table -9 S. No- (iii), (Amendment No-1)(Moisture resistance)	-	-	-
Cl-6, Table -9 S. No- (iv), a (Amendment No-1)(Initial dry area shape retention)	-	-	-
Cl-6, Table -9 S. No- (iv), b (Amendment No-1)(Area shape retention after 10th collapse)	-	-	-
Cl-6, Table -10 S. No- (i), (Amendment No-1)("Peel strength a) Initial b) After 5 000 wear cycles")	-	-	-
Cl-6, Table -10 S. No- (ii), (Amendment No-1)("Shear strength a) Initial b) After 5 000 wear cycles")	-	-	-
Cl-6, Table -11 S. No- (i), (Amendment No-1)(Limit of useful extension)	-	-	-
Cl-6, Table -12 S. No- (i), (Amendment No-1)(Breaking strength of lace)	-	-	-
Cl-6, Table -12 S. No- (ii), (Amendment No-1)(Lace tag strength)	-	-	-
Cl-6, Table -12 S. No- (iii), (Amendment No-1)(Lace to lace abrasion)	-	-	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	-	-
Cl-6, Table -12 S. No- (iv), (Amendment No-1)(Colour fastness to water (for lace) (contact method))	-	-	-
Cl-6, Table -12 S. No (v), (Amendment No-1)(Strength of buckle/ski hook)	-	-	-
Cl-6, Table -12 S. No- (vi), (Amendment No-1)(Corrosion resistance)	-	-	-
Cl.1.4.1 of IS 17011 (Table B Sl I )(Phthalate: DINP)	-	-	-
Cl.1.4.1 of IS 17011 (Table B Sl II )(Phthalate:: DNOP)	-	-	-
Cl.1.4.1 of IS 17011 (Table B Sl III )(Phthalate: DEHP)	-	-	-
Cl.1.4.1 of IS 17011 (Table B Sl IV )(Phthalate: DIDP)	-	-	-
Cl.1.4.1 of IS 17011 (Table B Sl V)(Phthalate: BBP)	-	-	-
Cl.1.4.1 of IS 17011 (Table B Sl VI )(Phthalate:DBP)	-	-	-
Cl.1.4.1 of IS 17011 (Table B Sl VII )(Phthalate: DIBP)	-	-	-
Cl.4.1 (Annex-A Sl I )(Organotin: Dibutyltin)	-	-	-
Cl.4.1 (Annex-A Sl II )(Organotin: Dibutyltin Dichloride)	-	-	-
Cl.4.1 (Annex-A Sl III )(Organotin: Dioctyltin)	-	-	-
Cl.4.1 (Annex-A Sl IV)(Organotin: Monobutyltin)	-	-	-
Cl.4.1 (Annex-A Sl V )(Organotin: Tributyltin)	-	-	-
Cl.4.1 (Annex-A Sl VI)(Organotin: Triphenyltin)	-	-	-
Cl.4.1 (Annex-A Sl VII )(Organotin: Monoctyltin)	-	-	-
Cl.4.1 (Annex-A Sl VIII)(Organotin: Bis (tributyltin) oxide)	-	-	-
Cl.4.1 (Table B-1 Sl I)(Aromatic Amines: 4-aminobiphenyl)	-	-	-
Cl.4.1 (Table B-1 Sl II)(Aromatic Amines: Benzidine)	-	-	-
Cl.4.1 (Table B-1 Sl III)(Aromatic Amines: 4-chloro-o-toluidine)	-	-	-
Cl.4.1 (Table B-1 Sl IV)(Aromatic Amines: 2-naphthylamine)	-	-	-
Cl.4.1 (Table B-1 Sl V)(Aromatic Amines :o-aminoazotoluene)	-	-	-
Cl.4.1 (Table B-1 Sl VI)(Aromatic Amines: 2-amino-4-nitrotoluenem)	-	-	-
Cl.4.1 (Table B-1 Sl VII)(Aromatic Amines: p-chloroaniline)	-	-	-
Cl.4.1 (Table B-1 Sl VIII)(Aromatic Amines: 2,4-diaminoanisole)	-	-	-
Cl.4.1 (Table B-1 Sl IX)(Aromatic Amines : 4,4’- diaminodiphenylmethane:)	-	-	-
Cl.4.1 (Table B-1 Sl X)(Aromatic Amines : 3,3’-dichlorobenzidine)	-	-	-
Cl.4.1 (Table B-1 Sl XI)(Aromatic Amines : 3,3’-dimethoxybenzidine)	-	-	-
Cl.4.1 (Table B-1 Sl XII)(Aromatic Amines : 3,3’-dimethylbenzidine)	-	-	-
Cl.4.1 (Table B-1 Sl XIII)(Aromatic Amines: 3,3’-dimethyl-4,4’-diaminodiphenylmethane)	-	-	-
Cl.4.1 (Table B-1 Sl XIV)(Aromatic Amines : p-cresi)	-	-	-
Cl.4.1 (Table B-1 Sl XV)(Aromatic Amines : 4,4’-methylene-bis(2-chloroaniline):)	-	-	-
Cl.4.1 (Table B-1 Sl XVI)(Aromatic Amines :4,4’-oxydianiline)	-	-	-
Cl.4.1 (Table B-1 Sl XVII)(Aromatic Amines:4,4’-thiodianiline)	-	-	-
Cl.4.1 (Table B-1 Sl XVIII)(Aromatic Amines :o-toluidine:)	-	-	-
Cl.4.1 (Table B-1 Sl XIX)(Aromatic Amines: 2,4-toluylendiamine)	-	-	-
Cl.4.1 (Table B-1 Sl XX)(Aromatic Amines: 2,4,5-trimethylaniline)	-	-	-
Cl.4.1 (Table B-1 Sl XXI)(Aromatic Amines :2,4-dimethylaniline)	-	-	-
Cl.4.1 (Table B-1 Sl XXII)(Aromatic Amines: 2,6-dimethylaniline:)	-	-	-
Cl.4.1 (Table B-1 Sl XXIII)(Aromatic Amines :2-methoxyaniline)	-	-	-
Cl.4.1 (Table B-1 Sl XXIV)(Aromatic Amines :4-aminoazobenzene)	-	-	-
Cl.4.1 (Table B-3 Sl I)(Allergenic Disperse Dyes :Disperse blue 3)	-	-	-
Cl.4.1 (Table B-3 Sl II)(Allergenic Disperse Dyes :Disperse blue 7)	-	-	-
Cl.4.1 (Table B-3 Sl III)(Allergenic Disperse Dyes :Disperse blue 26)	-	-	-
Cl.4.1 (Table B-3 Sl IV)(Allergenic Disperse Dyes :Disperse blue 102)	-	-	-
Cl.4.1 (Table B-3 Sl V)(Allergenic Disperse Dyes: Disperse brown 1)	-	-	-
Cl.4.1 (Table B-3 Sl VI)(Allergenic Disperse Dyes :Disperse yellow 1)	-	-	-
Cl.4.1 (Table B-3 Sl VII)(Allergenic Disperse Dyes :Disperse yellow 9)	-	-	-
Cl.4.1 (Table B-3 Sl VIII)(Allergenic Disperse Dyes :Disperse yellow 39)	-	-	-
Cl.4.1 (Table B-3 Sl IX)(Allergenic Disperse Dyes :Disperse yellow 49)	-	-	-
Cl.4.1 (Table B-3 Sl X)(Allergenic Disperse Dyes :Disperse orange 1)	-	-	-
Cl.4.1 (Table B-3 Sl XI)(Allergenic Disperse Dyes :Disperse red 11)	-	-	-
Cl.4.1 (Table B-3 Sl XII)(Allergenic Disperse Dyes :Disperse red 17)	-	-	-
Cl.4.1 (Table B-3 Sl XIII)(Allergenic Disperse Dyes :Disperse yellow 7)	-	-	-
Cl.4.1 (Table B-3 Sl XIV)(Allergenic Disperse Dyes :Disperse yellow 56)	-	-	-
Cl.4.1 (Table B-3 Sl XV)(Allergenic Disperse Dyes :Disperse red 151)	-	-	-
Cl.4.1 (Table B-3 Sl XVI)(Allergenic Disperse Dyes :Solvent red 23)	-	-	-
Cl.4.1 (Table B-4 Sl I)(Carcinogenic Disperse Dyes :Navy blue)	-	-	-
Cl.4.1 (Table B-4 Sl II)(Carcinogenic Disperse Dyes: Disperse blue 1)	-	-	-
Cl.4.1 (Table B-4 Sl III)(Carcinogenic Disperse Dyes: Disperse blue 35)	-	-	-
Cl.4.1 (Table B-4 Sl IV)(Carcinogenic Disperse Dyes :Disperse blue 106)	-	-	-
Cl.4.1 (Table B-4 Sl V)(Carcinogenic Disperse Dyes: Disperse blue 124)	-	-	-
Cl.4.1 (Table B-4 Sl VI)(Carcinogenic Disperse Dyes :Disperse yellow 3)	-	-	-
Cl.4.1 (Table B-4 Sl VII)(Carcinogenic Disperse Dyes: Disperse orange 3)	-	-	-
Cl.4.1 (Table B-4 Sl VIII)(Carcinogenic Disperse Dyes :Disperse orange 37/59/76a))	-	-	-
Cl.4.1 (Table B-4 Sl IX)(Carcinogenic Disperse Dyes :Disperse red 1)	-	-	-
Cl.4.1 (Table B-4 Sl X)(Carcinogenic Disperse Dyes :Basic red 9)	-	-	-
Cl.4.1 (Table B-4 Sl XI)(Carcinogenic Disperse Dyes :Violet 3)	-	-	-
Cl.4.1 (Table B-4 Sl XII)(Carcinogenic Disperse Dyes Disperse yellow 23)	-	-	-
Cl.4.1 (Table B-11)(PCP-TeCP-TriCP polychlorophenols)	-	-	-
Cl.4.1 (Table B-3)(Allergenic and Carcinogenic Disperse Dyes)	-	-	-
Cl-6, Table -5 S. No- (iv), b (Amendment No-1)(Water desorption, percent)	-	-	-

-
Included w.e.f 04.11.2025 Exclusion: Cl 4.3.8 (Washability)

IS 6664 (1992)

Rubber microcellular sheets for soles and heels - Specification (First Revision)

ALL

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Flexing resistance )	-	8500	-
4.2(Water absorption)	-	8500	-
4.2(Heat Shrinkage )	-	8500	-
4.2(Shrinkage at room temp)	-	8500	-
4.2(Split tear strength)	-	8500	-
4.2(Compression set)	-	8500	-
4.2(Hardness (Shore A))	-	8500	-
4.2(Density )	-	8500	-
4.2(Size & Thickness )	-	8500	-
4, Cl.4.1,4.1.1,4.1.2(Requirements)	-	8500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, i)(Relative density)	-	8500	-
Cl.4.1.3 And 8.3,Table1, iii)(Hardness, Shore A durometer min)	-	8500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iii)(Change in Hardness after ageing at 100±1°C for 24hr)	-	8500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, iv)(Compression set at constant stress percent, Max)	-	8500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, v)(Split tear strength, kg,Min)	-	8500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, vi)(Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	8500	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, vi)(Heat shrinkage test at 100±1°C for 1 hour max)	-	8500	-
Cl.4 Cl.4.1.3 And 8.3,Table1, viii)(Water absorption , percent by mass, Max)	-	8500	-
Cl.4 Cl.4.1.3 And 8.3,Table 1, viii)(Flexing resistance: Maximum cut growth at 50 000 cycles)	-	8500	-
5, 5.1(Marking)	-	8500	-
6, 6.1(Packing)	-	8500	-
"Cl.4 ,Cl.4.1,4.1.1,4.1.2(Requirements ")	-	8500	-
Cl.4.1.3 And 8.3,Table1(i) Relative density)	-	8500	-
Cl.4.1.3 And 8.3,Table1(ii) Hardness, Shore A durometer min)	-	8500	-
Cl.4.1.3 And 8.3,Table1(iii) Change in Hardness after ageing at 100±1°C for 24hr)	-	8500	-
Cl.4.1.3 And 8.3,Table1(iv) Compression set at constant stress percent, Max)	-	8500	-
Cl.4.1.3 And 8.3,Table1(vi) Room Temperature shrinkage at 27±2°C for 2weeks, percent, Max)	-	8500	-
Cl.4.1.3 And 8.3,Table 1 vi(Heat shrinkage test at 100±1°C for 1 hour max)	-	8500	-
Cl.4.1.3 And 8.3,Table1(viii)Water absorption , percent by mass, Max)	-	8500	-
Cl.4.1.3 And 8.3,Table1(ix)Flexing resistance)	-	8500	-
5, 5.1(Marking)	-	8500	-
6, 6.1(Packing)	-	8500	-
Cl.4.1.3 and 8.3,Table 1 ii(Thickness)	-	8500	-
Cl.4.1.3 and 8.3,Table 1 vii(Abrasion resistance at applied force of 5 N)	-	8500	-

-
Included w.e.f 08.12.2025

IS 13893 (1994)

Polyurethane soles semirigid - specification

ALL

6000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.3.2(Ageing test)	-	500	-
4.3(Ross Flex test)	-	500	-
4.3(Flexural strength )	-	500	-
4.3(Abrasion Resistance)	-	500	-
4.3(Elongation at break)	-	500	-
4.3(Tensile Strength )	-	500	-
4.3(Hardness Shore(A))	-	500	-
4.3(Relative density )	-	500	-
4.2(Thickness )	-	300	-
4.1(Design)	-	500	-
5, 5.1, 5.2(Packing And Marking)	-	400	-
Cl.5, 5.1, 5.2(Packing And Marking)	-	300	-
4.2 (Amendment 2)(Thickness)	-	400	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	500	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	500	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	500	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	500	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	500	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	500	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	500	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	500	-
4.3.2(Ageing test)	-	500	-
4.3(Ross Flex test)	-	700	-
4.3(Flexural strength )	-	700	-
4.3(Abrasion Resistance)	-	500	-
4.3(Elongation at break)	-	500	-
4.3(Tensile Strength )	-	500	-
4.3(Hardness Shore(A))	-	500	-
4.3(Relative density )	-	500	-
4.2(Thickness )	-	500	-
4.1(Design)	-	500	-
5, 5.1, 5.2(Packing And Marking)	-	500	-
Cl.5, 5.1, 5.2(Packing And Marking)	-	500	-
4.2 (Amendment 2)(Thickness)	-	500	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	500	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	500	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	500	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	500	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	500	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	500	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	500	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	500	-
4.3.2(Ageing test)	-	-	-
4.3(Ross Flex test)	-	-	-
4.3(Flexural strength )	-	-	-
4.3(Abrasion Resistance)	-	-	-
4.3(Elongation at break)	-	-	-
4.3(Tensile Strength )	-	-	-
4.3(Hardness Shore(A))	-	-	-
4.3(Relative density )	-	-	-
4.2(Thickness )	-	-	-
4.1(Design)	-	-	-
5, 5.1, 5.2(Packing And Marking)	-	-	-
Cl.5, 5.1, 5.2(Packing And Marking)	-	-	-
4.2 (Amendment 2)(Thickness)	-	-	-
4.3.1 Table 1 i) (Amendment 2)(Relative Density)	-	-	-
4.3.1 Table 1 iii) (Amendment 2)(Abrasion Resistance at applied force of 10 N)	-	-	-
4.3.1 Table 1 iv) (Amendment 2)(Flexing Resistance, Bennewart method)	-	-	-
4.3.1 Table 1 v) (Amendment 2)(Hydrolysis Resistance, cut growth after 150000 flexes)	-	-	-
4.3.1 Table 1 vi) (Amendment 2)(Tensile Strength)	-	-	-
4.3.1 Table 1 vii) (Amendment 2)(Elongation at break)	-	-	-
4.3.1 Table 1 viii) (Amendment 2)(Tear Strength (average force))	-	-	-
4.3.1 Table 1 ii) (Amendment 2)(Hardness, degree, Shore A)	-	-	-

-
Included w.e.f 08.12.2025

IS 11226 (1993)

Leather safety footwear having direct moulded rubber sole specification (First Revision)

ALL

21000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(REQUIREMENTS)	-	500	-
5.2(Materials)	-	500	-
5.2.1(Materials)	-	500	-
5.2.1.1(Materials)	-	500	-
5.2.2(Materials)	-	500	-
5.2.3(Materials)	-	500	-
5.2.4(Materials)	-	500	-
5.2.5(Materials)	-	500	-
5.2.6(Materials)	-	500	-
5.2.6.1(Materials)	-	500	-
5.2.6.2(Materials)	-	500	-
5.2.6.3(Materials)	-	500	-
5.2.7(Materials)	-	500	-
5.2.8(Materials)	-	500	-
5.2.9(Materials)	-	500	-
5.2.10(Materials)	-	500	-
5.2.11(Materials)	-	500	-
5.2.11.1(Materials)	-	500	-
5.2.11.2(Materials)	-	500	-
5.2.11.3(Materials)	-	500	-
5.3(Components)	-	700	-
5.4( Manufacture )	-	400	-
5.4.1( Manufacture )	-	400	-
5.4.8(Workmanship and Finish)	-	300	-
5.5(Mass)	-	300	-
5.6(Performance Test)	-	1000	-
5.7(Adhesion Test on Moulded Bottoms)	-	1000	-
7(MARKING)	-	300	-
5.7(Toe adhesion )	-	1000	-
5.6.(Toe Impact test)	-	1000	-
5.5(Mass per pairs)	-	400	-
5.4.8(Leg height)	-	300	-
5.4(Dimension )	-	500	-
5.3 & 5.4.2(Thickness of components )	-	400	-
5.2.11.2(Flexing resistance)	-	1000	-
5.2.11.2(Resistance to Fuel Oil)	-	1000	-
5.2.11.2(Elongation at break)	-	1000	-
5.2.11.2(Tensile Strength)	-	1000	-
5.2.11.2(Hardness (Shore A))	-	500	-
5.2.11(Hardness (IRHD)-after ageing)	-	700	-
5.2.11(Flexing resistance)	-	1000	-
5.2.11(Elongation at break)	-	1000	-
5.2.11(Tensile Strength)	-	1000	-
5.2.11(Hardness (IRHD))	-	500	-
5.2.11(Relative density )	-	1000	-
5.1(REQUIREMENTS)	-	0	-
5.2(Materials)	-	0	-
5.2.1(Materials)	-	0	-
5.2.1.1(Materials)	-	0	-
5.2.2(Materials)	-	0	-
5.2.3(Materials)	-	0	-
5.2.4(Materials)	-	0	-
5.2.5(Materials)	-	0	-
5.2.6(Materials)	-	0	-
5.2.6.1(Materials)	-	0	-
5.2.6.2(Materials)	-	0	-
5.2.6.3(Materials)	-	0	-
5.2.7(Materials)	-	0	-
5.2.8(Materials)	-	0	-
5.2.9(Materials)	-	0	-
5.2.10(Materials)	-	0	-
5.2.11(Materials)	-	0	-
5.2.11.1(Materials)	-	0	-
5.2.11.2(Materials)	-	0	-
5.2.11.3(Materials)	-	0	-
5.3(Components)	-	0	-
5.4( Manufacture )	-	0	-
5.4.1( Manufacture )	-	0	-
5.4.8(Workmanship and Finish)	-	0	-
5.5(Mass)	-	0	-
5.6(Performance Test)	-	0	-
5.7(Adhesion Test on Moulded Bottoms)	-	0	-
7(MARKING)	-	0	-
5.7(Toe adhesion )	-	0	-
5.6.(Toe Impact test)	-	0	-
5.5(Mass per pairs)	-	0	-
5.4.8(Leg height)	-	0	-
5.4(Dimension )	-	0	-
5.3 & 5.4.2(Thickness of components )	-	0	-
5.2.11.2(Flexing resistance)	-	0	-
5.2.11.2(Resistance to Fuel Oil)	-	0	-
5.2.11.2(Elongation at break)	-	0	-
5.2.11.2(Tensile Strength)	-	0	-
5.2.11.2(Hardness (Shore A))	-	0	-
5.2.11(Hardness (IRHD)-after ageing)	-	0	-
5.2.11(Flexing resistance)	-	0	-
5.2.11(Elongation at break)	-	0	-
5.2.11(Tensile Strength)	-	0	-
5.2.11(Hardness (IRHD))	-	0	-
5.2.11(Relative density )	-	0	-

-
Included w.e.f 08.12.2025

IS 5676 (1995)

Moulded solid rubber soles and heels - SpecificatlOn (Second Revision)

ALL

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	700	-
5/5.1(REQUIREMENTS-General)	-	500	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	500	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	400	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	400	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	700	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	400	-
5/5.1(REQUIREMENTS-General)	-	400	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	400	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	400	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	400	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	700	-
5/5.3/5.3.1(REQUIREMENTS- Construction)	-	700	-
5/5.1(REQUIREMENTS-General)	-	400	-
5/5.2- Fig. 1 to 5(REQUIREMENTS-Design)	-	400	-
5/5.5- Table1(REQUIREMENTS-Thickness)	-	400	-
5/5.6/5.6.1(REQUIREMENTS-Channel)	-	400	-
5/5.7- Table2(REQUIREMENTS- Physical Requirements- as per IS 3400 (Part 1, Part 2, Part 4, Part 9, Part 10, Part 16))	-	700	-
6(Marking and packing)	-	500	-
8.1(Test methods)	-	800	-
8.3(Measurement of thickness)	-	400	-
Cl.6.1,6.2,6.3(Marking and packing)	-	500	-
8.1(Test Methods)	-	800	-
Cl.8.3(Measurement of thickness ")	-	400	-
5.5 (Amendment 1)(Thickness)	-	400	-
5.7 Table 2 i) (Amendment 1)(Relative Density)	-	500	-
5.7, Table 2 ii) (Amendment 1)(Hardness, degree, Shore A)	-	400	-
5.7, Table 2 iv) (Amendment 1)(Abrasion Resistance at applied force of 10 N)	-	700	-
5.7, Table 2 v) (Amendment 1)(Tensile strength)	-	1000	-
5.7, Table 2 vi) (Amendment 1)(Elongation at break)	-	1000	-
5.7, Table 2 vii) (Amendment 1)(Tear strength (average force))	-	1000	-
5.7, Table 2 iii) (Amendment 1)(Flexing resistance)	-	1000	-

-
Included w.e.f.18.08.2025

IS 1989 : Part 2 (1986)

Specification for leather safety boots and shoes: Part 2 for heavy metal industries (Fourth Revision)

ALL

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Marking)	-	500	-
7(Design)	-	500	-
8(a) Upper Leather)	-	400	-
8(b) Lining Leather)	-	400	-
8(c) Bottom Material)	-	500	-
8(d) Steel Toe Cap)	-	400	-
8(e) Tape)	-	300	-
8(f) Bottom Filling)	-	400	-
8(g) Eyelet)	-	300	-
8(h) Toe Compound)	-	400	-
8(i) Threads)	-	300	-
8(j) Rivets)	-	400	-
8(k) Screw Wire)	-	500	-
8(l) Heel Pin)	-	500	-
8(m) Shank)	-	500	-
8(n) Laces)	-	400	-
8(o) Tongue Lining)	-	500	-
8(p) Adhesive)	-	300	-
8(q) Strengthening Piece)	-	300	-
8(r) Leather Components)	-	500	-
9(Manufacture)	-	400	-
10(Finish)	-	300	-
11(a) Boots with Leather Sole and Heel)	-	500	-
11(b) Boots with Rubber Sole and Heel)	-	400	-
12(Performance Test)	-	400	-
13(Design)	-	500	-
14(a) Upper Leather)	-	400	-
14(b) Lining Leather)	-	500	-
14(c) Bottom Material)	-	400	-
14(d) Steel Toe Cap)	-	400	-
14(e) Tape)	-	400	-
14(f) Bottom Filling)	-	500	-
14(g) Eyelet)	-	500	-
14(h) Toe Compound)	-	400	-
14(i) Threads)	-	300	-
14(j) Rivets)	-	300	-
14(k) Screw Wire)	-	400	-
14(l) Heel Pin)	-	400	-
14(m) Shank)	-	400	-
14(n) Laces)	-	400	-
14(o) Tongue Lining)	-	400	-
14(p) Adhesive)	-	400	-
14(q) Leather Components)	-	400	-
15(Manufacture)	-	300	-
16(Finish)	-	400	-
17(a) Shoes with Leather Sole and Heel)	-	500	-
17(b) Shoes with Rubber Sole and Heel)	-	500	-
18(Performance Test)	-	1000	-
4(Marking)	-	300	-
7(Design)	-	400	-
8(a) Upper Leather)	-	1000	-
8(b) Lining Leather)	-	1000	-
8(c) Bottom Material)	-	1000	-
8(d) Steel Toe Cap)	-	400	-
8(e) Tape)	-	500	-
8(f) Bottom Filling)	-	1000	-
8(g) Eyelet)	-	400	-
8(h) Toe Compound)	-	400	-
8(i) Threads)	-	400	-
8(j) Rivets)	-	400	-
8(k) Screw Wire)	-	300	-
8(l) Heel Pin)	-	300	-
8(m) Shank)	-	300	-
8(n) Laces)	-	400	-
8(o) Tongue Lining)	-	400	-
8(p) Adhesive)	-	400	-
8(q) Strengthening Piece)	-	400	-
8(r) Leather Components)	-	400	-
9(Manufacture)	-	400	-
10(Finish)	-	400	-
11(a) Boots with Leather Sole and Heel)	-	400	-
11(b) Boots with Rubber Sole and Heel)	-	400	-
12(Performance Test)	-	500	-
13(Design)	-	400	-
14(a) Upper Leather)	-	400	-
14(b) Lining Leather)	-	400	-
14(c) Bottom Material)	-	500	-
14(d) Steel Toe Cap)	-	400	-
14(e) Tape)	-	400	-
14(f) Bottom Filling)	-	400	-
14(g) Eyelet)	-	500	-
14(h) Toe Compound)	-	500	-
14(i) Threads)	-	400	-
14(j) Rivets)	-	400	-
14(k) Screw Wire)	-	300	-
14(l) Heel Pin)	-	400	-
14(m) Shank)	-	300	-
14(n) Laces)	-	300	-
14(o) Tongue Lining)	-	300	-
14(p) Adhesive)	-	300	-
14(q) Leather Components)	-	500	-
15(Manufacture)	-	400	-
16(Finish)	-	400	-
17(a) Shoes with Leather Sole and Heel)	-	500	-
17(b) Shoes with Rubber Sole and Heel)	-	500	-
18(Performance Test)	-	1000	-
4(Marking)	-	400	-
7(Design)	-	400	-
8(a) Upper Leather)	-	400	-
8(b) Lining Leather)	-	400	-
8(c) Bottom Material)	-	300	-
8(d) Steel Toe Cap)	-	400	-
8(e) Tape)	-	300	-
8(f) Bottom Filling)	-	400	-
8(g) Eyelet)	-	300	-
8(h) Toe Compound)	-	400	-
8(i) Threads)	-	400	-
10(Finish)	-	400	-
8(j) Rivets)	-	400	-
8(k) Screw Wire)	-	300	-
8(l) Heel Pin)	-	400	-
8(m) Shank)	-	400	-
8(n) Laces)	-	300	-
8(o) Tongue Lining)	-	300	-
8(p) Adhesive)	-	400	-
8(q) Strengthening Piece)	-	400	-
8(r) Leather Components)	-	500	-
9(Manufacture)	-	400	-
11(a) Boots with Leather Sole and Heel)	-	400	-
11(b) Boots with Rubber Sole and Heel)	-	400	-
12(Performance Test)	-	1000	-
13(Design)	-	400	-
14(a) Upper Leather)	-	400	-
14(b) Lining Leather)	-	300	-
14(c) Bottom Material)	-	400	-
14(d) Steel Toe Cap)	-	400	-
14(e) Tape)	-	300	-
14(f) Bottom Filling)	-	400	-
14(g) Eyelet)	-	400	-
14(h) Toe Compound)	-	400	-
14(i) Threads)	-	300	-
14(j) Rivets)	-	400	-
14(k) Screw Wire)	-	300	-
14(l) Heel Pin)	-	300	-
14(m) Shank)	-	400	-
14(n) Laces)	-	400	-
14(o) Tongue Lining)	-	400	-
14(p) Adhesive)	-	500	-
14(q) Leather Components)	-	400	-
15(Manufacture)	-	500	-
16(Finish)	-	400	-
17(a) Shoes with Leather Sole and Heel)	-	300	-
17(b) Shoes with Rubber Sole and Heel)	-	400	-
18(Performance Test)	-	1000	-

-
Included w.e.f.18.08.2025

IS 16994 (2018)

Footwear for Men and Women for Municipal Scavenging Work

ALL

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.6(Leak Proof test)	-	1000	-
8.4(Volatility & lead content )	-	1000	-
8.3(Compression Resistance)	-	500	-
8.3(Impact resistance )	-	500	-
8.2(Internal Toe cap length)	-	500	-
8.1(Height of upper )	-	300	-
8.0(Construction)	-	300	-
7.10(Ageing test)	-	400	-
7.9(Hydrolysis)	-	500	-
7.8(Insocks Material )	-	500	-
7.7.5(Upper / Outsole bond strength)	-	400	-
7.7.4(Interlayer Bond Strength )	-	500	-
7.7.3(Flexing Resistance )	-	1000	-
7.7.2(Abrasion Resistance)	-	1000	-
7.7.1(Tear Strength )	-	1000	-
7.7(Hardness (IRHD))	-	500	-
7.7(Thickness)	-	300	-
7.7(Density )	-	1000	-
7.6(Peel Strength )	-	1000	-
7.6(Shape retention)	-	1000	-
7.6(Moisture )	-	1000	-
7.6(Resilience test )	-	1000	-
7.6(1st Dry collapsing load, hardness)	-	1000	-
7.5(Insocks )	-	500	-
7.5(Insoles )	-	500	-
7.5(Water abrasion & desorption)	-	1000	-
7.5(Thickness )	-	500	-
7.4(Tensile Strength )	-	1000	-
7.4(Abrasion Resistance)	-	1000	-
7.4(Tear Strength )	-	1000	-
7.3(Flexing Resistance )	-	1000	-
7.3(Tensile Strength )	-	1000	-
7.3(Thickness )	-	300	-
7.3(Water Vapour permeability & coefficient )	-	1000	-
7.3(Tear Strength )	-	1000	-
7.1(Compression Tester)	-	1000	-
7.1(Impact resistance)	-	1000	-
Cl-7.4(water vapour permeability of lining)	-	1000	-
Cl-7.4(Water vapour coefficient of lining)	-	1000	-
Cl-7.3(Hydrolysis of upper)	-	1000	-
8.6(Leak Proof test)	-	1000	-
8.4(Volatility & lead content )	-	1000	-
8.3(Compression Resistance)	-	1000	-
8.3(Impact resistance )	-	1000	-
8.2(Internal Toe cap length)	-	500	-
8.1(Height of upper )	-	300	-
8.0(Construction)	-	400	-
7.10(Ageing test)	-	500	-
7.9(Hydrolysis)	-	500	-
7.8(Insocks Material )	-	500	-
7.7.5(Upper / Outsole bond strength)	-	500	-
7.7.4(Interlayer Bond Strength )	-	500	-
7.7.3(Flexing Resistance )	-	1000	-
7.7.2(Abrasion Resistance)	-	1000	-
7.7.1(Tear Strength )	-	1000	-
7.7(Hardness (IRHD))	-	500	-
7.7(Thickness)	-	300	-
7.7(Density )	-	500	-
7.6(Peel Strength )	-	1000	-
7.6(Shape retention)	-	500	-
7.6(Moisture )	-	500	-
7.6(Resilience test )	-	1000	-
7.6(1st Dry collapsing load, hardness)	-	500	-
7.5(Insocks )	-	500	-
7.5(Insoles )	-	500	-
7.5(Water abrasion & desorption)	-	500	-
7.5(Thickness )	-	300	-
7.4(Tensile Strength )	-	1000	-
7.4(Abrasion Resistance)	-	1000	-
7.4(Tear Strength )	-	1000	-
7.3(Flexing Resistance )	-	1000	-
7.3(Tensile Strength )	-	1000	-
7.3(Thickness )	-	300	-
7.3(Water Vapour permeability & coefficient )	-	400	-
7.3(Tear Strength )	-	1000	-
7.1(Compression Tester)	-	1000	-
7.1(Impact resistance)	-	500	-
Cl-7.4(water vapour permeability of lining)	-	500	-
Cl-7.4(Water vapour coefficient of lining)	-	500	-
Cl-7.3(Hydrolysis of upper)	-	1000	-

-
Included w.e.f.18.08.2025

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

EKO PRO ENGINEERS PRIVATE LIMITED (32/41), GHAZIABAD

32/41 & 32/40 , South Side of GT Road, UPSIDC Industrial Area,Ghaziabad (Delhi-NCR), Ghaziabad, Ghaziabad, Uttar Pradesh, 201009

9810243870 ekotestinglabs@gmail.com

Scope List