BIS - LIMS (Laboratory Information Management System)

Bharti Automation Pvt. Ltd.(A Testing Division), Gurugram

Plot no. 354,Sector-7, IMT Manesar, Gurgaon, Gurgaon, Gurugram, Haryana, 122050

9711337466 ashok@bhartiautomation.com

Scope List

Reset

23 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 398 : Part 2 (2025)

Aluminium Conductor for Overhead Transmission Purposes - Specification Part 2 Aluminium Conductors Galvanized Steel Reinforced (Fourth Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-6(Material)	-	1000	-
Cl-7(Freedom From Defects)	-	1000	-
Cl-8.1(Wires-Nominal Sizes)	-	1000	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	1000	-
Cl-9.1(Joint in Wires)	-	1000	-
Cl-9.2(Aluminium Wires)	-	1000	-
Cl-9.3(Galvanized Steel Wires)	-	1000	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	2000	-
Cl-11.1(Standard Length)	-	1000	-
Cl-11.2(Random Lengths)	-	1000	-
Cl-13.3(Conductor- Visual examination)	-	1000	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	2000	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	2000	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	5000	-
Cl- 13.7(Steel wires- Ductility test)	-	2000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	5000	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	5000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	2000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	5000	-
Cl-13.7.1(Torsion Test)	-	2000	-
Cl-13.7.2(Elongation Test)	-	2000	-
Cl- 13.6(Steel wires- Breaking load test)	-	2000	-
Cl- 13.8(Steel wires- Wrapping test)	-	2000	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	5000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	5000	-
Cl-6(Material)	-	1000	-
Cl-7(Freedom From Defects)	-	1000	-
Cl-8.1(Wires-Nominal Sizes)	-	1000	-
Cl-8.2(Aluminum Conductors, Galvanized Steel- Reinforced)	-	1000	-
Cl-9.1(Joint in Wires)	-	1000	-
Cl-9.2(Aluminium Wires)	-	1000	-
Cl-9.3(Galvanized Steel Wires)	-	1000	-
Cl-10.2(Lay Ratio of Aluminium Conductors Galvanized Steel-Reinforced)	-	2000	-
Cl-11.1(Standard Length)	-	1000	-
Cl-11.2(Random Lengths)	-	1000	-
Cl-13.3(Conductor- Visual examination)	-	1000	-
Cl- 13.4(Steel wires- Measurement of diameter)	-	2000	-
Cl- 13.5(Conductor- Measurement of lay ratio/direction of lay)	-	2000	-
Cl- 13.6(Aluminium wires -Breaking load test)	-	5000	-
Cl- 13.7(Steel wires- Ductility test)	-	2000	-
Cl- 13.8(Aluminium wires- Wrapping test)	-	5000	-
Cl- 13.9(Aluminium wires- d.c. resistance test)	-	5000	-
Cl- 13.10(Steel wires- Galvanizing test)	-	2000	-
Cl- 13.12(Conductor- d.c. Resistance test on stranded conductor)	-	5000	-
Cl-13.7.1(Torsion Test)	-	2000	-
Cl-13.7.2(Elongation Test)	-	2000	-
Cl- 13.6(Steel wires- Breaking load test)	-	5000	-
Cl- 13.8(Steel wires- Wrapping test)	-	5000	-
Cl-13.4(Aluminium wires-Measurement of diameter)	-	2000	-
Cl- 13.11(Aluminium wires Procedure qualification test on welded joint of aluminium strands)	-	5000	-
Cl-6.2(zinc used for galvanizing)	-	2000	-
Cl-6.1.1(chemical composition of high carbon steel)	-	2000	-

05 Aug, 2027

-
Included w.e.f. 17.02.2026 Exclusion: "Cl- 13.13 (Conductor- Surface condition test on stranded conductor) Cl- 13.14 (Conductor- Ultimate tensile strength test on stranded conductor) Cl- 13.15 (Conductor- Corona test (for conductors intended for use at 400 kV and above voltage level for a.c. and ± 320 kV and above voltage level for d.c.)) Cl-13.16 (Conductor- Radio interference voltage test)"

IS 7098 : Part 1 (2025)

Crosslinked Polyethylene Insulated Thermoplastic Sheathed Cables - Specification Part 1 For Working Voltages up to and Including 1 100 Volts (Second Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(Conductors -Material)	-	1000	-
Cl-5, Table-1 (i)(Tensile strength)	-	2000	-
Cl-5, Table-1 (ii) (a)(Elongation at break- Ageing in air oven)	-	2000	-
Cl-5, Table-1 (ii) (b)(Variation in tensile strength, from that without ageing)	-	3000	-
Cl-5, Table-1 (ii) (c)(Variation in elongation at break, from that without ageing)	-	3000	-
Cl-5, Table-1 (iii) (a)(Hot set- Treatment;)	-	2000	-
Cl-5, Table-1 (iii) (b)(Hot set- Elongation under load)	-	2000	-
Cl-5, Table-1 (iii) (c)(Hot set- Permanent elongation after cooling)	-	2000	-
Cl-5, Table-1 (iv)(Shrinkage)	-	2000	-
Cl-5, Table-1 (v)(Water absorption (gravimetric))	-	5000	-
Cl-5, Table-1 (vi)(Volume resistivity)	-	2000	-
Cl-6.1 (a)(Fillers and inner sheath- Vulcanized or unvulcanized rubber)	-	1000	-
Cl-6.1 (B)(Fillers and inner sheath- Thermoplastic materials)	-	1000	-
Cl-7(Armouring)	-	1000	-
Cl-8(Outer Sheath)	-	1000	-
Cl-10.3(Tolerance on Thickness of Insulation)	-	2000	-
Cl-11(Core Identification)	-	1000	-
Cl-12(Laying up of Cores)	-	1000	-
Cl-13(Inner Sheath (Common Covering))	-	1000	-
Cl-14.1(Armouring- Application)	-	1000	-
Cl-14.1.2(armour round wires/formed wires)	-	1000	-
Cl-14.2(Type of Armour)	-	1000	-
Cl-14.3(Dimensions)	-	2000	-
Cl-14.4(Joints)	-	1000	-
Cl-14.5(Resistance)	-	2000	-
Cl-15.3(Thickness of Outer Sheath)	-	2000	-
Cl-16.1 (i) (a)(Test on conductor: Annealing test (for copper);)	-	2000	-
Cl-16.1 (i) (b)(Test on conductor: Tensile test (for aluminium);)	-	2000	-
Cl-16.1 (i) (c)(Test on conductor: Wrapping test (for aluminium);)	-	2000	-
Cl-16.1 (i) (d)(Test on conductor: Resistance test)	-	2000	-
Cl-14.6 (a)(Physical tests on round wires/formed wires- Tensile strength)	-	2000	-
Cl-14.6 (b)(Physical tests on round wires/formed wires- Elongation at break)	-	2000	-
Cl-14.6 (c)(Physical tests on round wires/formed wires- Torsion test for round wires)	-	2000	-
Cl-14.6 (d)(Physical tests on round wires/formed wires- Winding test for formed wires)	-	2000	-
Cl-14.6 (e)(Physical tests on round wires/formed wires- Uniformity of zinc coating)	-	2000	-
Cl-14.6 (f)(Physical tests on round wires/formed wires- Mass of zinc coating)	-	2000	-
Cl-14.6 (g)(Physical tests on round wires/formed wires- Resistivity.)	-	2000	-
Cl-10, 13, 15(Test for thickness of insulation and sheath)	-	2000	-
Cl-16.1 (v) (1)(PVC Sheath- Tensile strength and elongation at break;)	-	2000	-
Cl-16.1 (v) (2)(PVC Sheath- Ageing in air oven)	-	3000	-
Cl-16.1 (v) (3)(PVC Sheath- Loss of mass in air oven)	-	3000	-
Cl-16.1 (v) (5)(PVC Sheath- Hot deformation test)	-	2000	-
Cl-16.1 (v) (6)(PVC Sheath- Heat shock test)	-	2000	-
Cl-16.1 (v) (7)(PVC Sheath- Thermal stability)	-	2000	-
Cl-8.3-Table 1A(PE Sheath- Carbon black content)	-	2000	-
Cl-8.3-Table 1A(PE Sheath- Tensile strength and elongation at break before and after ageing)	-	2000	-
Cl-8.3-Table 1A(PE Sheath- Hot deformation)	-	2000	-
Cl-8.3-Table 1A(PE Sheath- Shrinkage test.)	-	2000	-
Cl- Table 1B(LSHF Sheath- Tensile strength and elongation at break before and after ageing)	-	2000	-
Cl- Table 1B(LSHF Sheath- Hot deformation)	-	2000	-
Cl- Table 1B(LSHF Sheath- Water absorption test)	-	5000	-
Cl- Table 1B(LSHF Sheath- Shrinkage test)	-	2000	-
Cl-17.2(High voltage test)	-	2000	-
Cl-17.3(Flammability test)	-	2000	-
Cl-17.4(Oxygen index test (FR, FR-LSH or LSHF Sheath))	-	3000	-
Cl-17.5(Flame retardance test on single cable)	-	2000	-
Cl-17.6(Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables))	-	5000	-
Cl-17.7(Test for halogen acid evolution (FR-LSH or LSHF Outer Sheath))	-	3000	-
Cl-17.8(Smoke density test (FR-LSH or LSHF Sheath))	-	3000	-
Cl-17.9(Temperature index test; (FR, FR-LSH or LSHF Sheath))	-	3000	-
Cl-17.10(Test for pH and conductivity of LSHF Sheath)	-	3000	-
Cl-16.4 (i)(Cold bend test for outer sheath)	-	2000	-
Cl-16.4 (ii)(Cold impact test for outer sheath)	-	2000	-
Cl-16.4 (iii)(Cold elongation test for LSHF sheath)	-	2000	-
Cl-17.11(Test for light transmission for LSHF Sheathed Cables)	-	5000	-

05 Aug, 2027

-
Included w.e.f. 17.02.2026 Exclusion: "Cl-17.6 (Flame retardance test on bunched cables (FR, FR-LSH or LSHF Sheathed Cables)) Cl-17.8 (Smoke density test (FR-LSH or LSHF Sheath))"

IS 16046 : Part 2 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	2000	20% discount to BIS
5(General Safety Considerations)	-	2000	20% discount to BIS
5.1(General)	-	2000	20% discount to BIS
5.2(Insulation and Wiring)	-	2000	20% discount to BIS
5.3(Venting)	-	2000	20% discount to BIS
5.4(Temperature, Voltage and Current Management)	-	2000	20% discount to BIS
5.5(Terminal Contacts)	-	2000	20% discount to BIS
5.6(Assembly of Cells into batteries)	-	2000	20% discount to BIS
5.7(Quality Plan)	-	2000	20% discount to BIS
5.8(Battery Safety Components)	-	2000	20% discount to BIS
6(Type Test and Sample Size)	-	2000	20% discount to BIS
7(Specific requirements and tests)	-	2000	20% discount to BIS
7.1(Charging procedure for test purposes)	-	2000	20% discount to BIS
7.2(Intended Use)	-	2000	20% discount to BIS
7.3(Reasonably foreseeable misuse)	-	2000	20% discount to BIS
8(Information for safety)	-	2000	20% discount to BIS
8.1(General)	-	2000	20% discount to BIS
8.2(Small Cell and battery safety information)	-	2000	20% discount to BIS
9(Marking)	-	2000	20% discount to BIS
9.1(Cell Marking)	-	2000	20% discount to BIS
9.3(Caution for ingestion of small cells and batteries)	-	2000	20% discount to BIS
9.4(Other information)	-	2000	20% discount to BIS
9.2(Battery Marking)	-	2000	20% discount to BIS
10(Packaging)	-	2000	20% discount to BIS

05 Aug, 2027

-
Included w.e.f. 17.02.2026 Exclusion : Clause 7.3.1 of IS 16047: Part 3

IS 16046 : Part 1 (2018)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Parameter Measurement Tolerances)	-	2000	20% discount to BIS
5(General Safety Considerations)	-	2000	20% discount to BIS
5.1(General)	-	2000	20% discount to BIS
5.2(Insulation and Wiring)	-	2000	20% discount to BIS
5.3(Venting)	-	2000	20% discount to BIS
5.4(Temperature, Voltage and Current Management)	-	2000	20% discount to BIS
5.5(Terminal Contacts)	-	2000	20% discount to BIS
5.6(Assembly of Cells into batteries)	-	2000	20% discount to BIS
5.7(Quality Plan)	-	2000	20% discount to BIS
6(Tyoe Test amd Sample Size)	-	2000	20% discount to BIS
7(Specific requirements and tests)	-	2000	20% discount to BIS
7.1(Charging procedure for test purposes)	-	2000	20% discount to BIS
7.2(Intended Use)	-	2000	20% discount to BIS
7.3(Reasonably foreseeable misuse)	-	2000	20% discount to BIS
8(Information for safety)	-	2000	20% discount to BIS
8.1(General)	-	2000	20% discount to BIS
8.2(Small Cell and battery safety information)	-	2000	20% discount to BIS
9(Marking)	-	2000	20% discount to BIS
9.1(Cell Marking)	-	2000	20% discount to BIS
9.2(Battery Marking)	-	2000	20% discount to BIS
9.3(Caution for ingestion of small cells and batteries)	-	2000	20% discount to BIS
9.4(Other information)	-	2000	20% discount to BIS
10(Packaging)	-	2000	20% discount to BIS

05 Aug, 2027

-
included w.e.f 27.01.2026

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	2000	20% discount to BIS
Cl-4.2(Secondary Cells and Batteries)	-	2000	20% discount to BIS
Cl-4.3(General Operating Conditions)	-	2000	20% discount to BIS
Cl-4.3.8(Storage)	-	2000	20% discount to BIS
Cl-4.3.9(Operating Temperature)	-	2000	20% discount to BIS
Cl-5.1(Mechanical Endurance)	-	2000	20% discount to BIS
Cl-5.2(Charge Efficiency)	-	2000	20% discount to BIS
Cl-5.3(Deep Discharge Protection)	-	2000	20% discount to BIS
Cl-5.4(Marking)	-	2000	20% discount to BIS
Cl-5.5(Safety)	-	2000	20% discount to BIS
Cl-5.6(Documentation)	-	2000	20% discount to BIS
Cl-6(Functional characteristice)	-	2000	20% discount to BIS
Cl-7(General test conditions)	-	2000	20% discount to BIS
Cl-8.1(Capacity Test)	-	2000	20% discount to BIS
Cl-8.2(Endurance Test)	-	2000	20% discount to BIS
Cl-8.3(Charge Retention Test)	-	2000	20% discount to BIS
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	2000	20% discount to BIS
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	2000	20% discount to BIS
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	2000	20% discount to BIS
Cl-9.1(Type Tests)	-	2000	20% discount to BIS
Cl-9.2(Acceptance Test)	-	2000	20% discount to BIS
4.3.7.1(Specific gravity)	-	2000	20% discount to BIS

05 Aug, 2027

-
included w.e.f 27.01.2026

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	5000	-
Cl-4.2(Energy source classifications)	-	5000	-
Cl-4.3(Protection against energy sources)	-	5000	-
Cl-4.4(Safeguards)	-	5000	-
Cl-4.5(Explosion)	-	5000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	5000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	5000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	5000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	5000	-
Cl-4.10(Components requirements)	-	5000	-
Cl-5.1(General- Electrically-caused injury)	-	5000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	5000	-
Cl-5.3(Protection against electrical energy sources)	-	5000	-
Cl-5.4(Insulation materials and requirements)	-	5000	-
Cl-5.5(Components as safeguards)	-	5000	-
Cl-5.6(Protective conductor)	-	5000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	5000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	5000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	5000	-
Cl-6.1(General- Electrically-caused fire)	-	5000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	5000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	5000	-
Cl-6.5(Internal and external wiring)	-	5000	-
Cl-8.1(General- Mechanically-caused injury)	-	5000	-
Cl-8.2(Mechanical energy source classifications)	-	5000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	5000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	5000	-
Cl-8.5(Safeguards against moving parts)	-	5000	-
Cl-8.6(Stability of equipment)	-	5000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	5000	-
Cl-8.8(Handle strength)	-	5000	-
Cl-8.9(Wheels or casters attachment requirements)	-	5000	-
Cl-8.10(Carts, stands, and similar carriers)	-	5000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	5000	-
Cl-9.1(General-Thermal burn injury)	-	5000	-
Cl-9.2(Thermal energy source classifications)	-	5000	-
Cl-9.3(Touch temperature limits)	-	5000	-
Cl-9.4(Safeguards against thermal energy sources)	-	5000	-
Cl-9.5(Requirements for safeguards)	-	5000	-
Cl-9.6(Requirements for wireless power transmitters)	-	5000	-
Annex A(Examples of equipment within the scope of this document)	-	5000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	5000	-
Annex B-2(Normal operating conditions)	-	5000	-
Annex B-3(Simulated abnormal operating conditions)	-	5000	-
Annex B-4(Simulated single fault conditions)	-	5000	-
Annex D-1(Impulse test generators)	-	5000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	5000	-
Annex F-2(Letter symbols and graphical symbols)	-	5000	-
Annex F-3(Equipment markings)	-	5000	-
Annex F-4(Instructions)	-	5000	-
Annex F-5(Instructional safeguards)	-	5000	-
Annex H-1(General- Criteria for telephone ringing signals)	-	5000	-
Annex H-2(Method A)	-	5000	-
Annex H-3(Method B)	-	5000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	5000	-
Annex K-1(General- Safety interlocks)	-	5000	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	5000	-
Annex K-3(Inadvertent change of operating mode)	-	5000	-
Annex K-4(Interlock safeguard override)	-	5000	-
Annex K-5(Fail-safe)	-	5000	-
Annex K-6(Mechanically operated safety interlocks)	-	5000	-
Annex K-7(Interlock circuit isolation)	-	5000	-
Annex L-1(General requirements)	-	5000	-
Annex L-2(Permanently connected equipment)	-	5000	-
Annex L-3()	-	5000	-
Annex L-4(Single-phase equipment)	-	5000	-
Annex L-5(Three-phase equipment)	-	5000	-
Annex L-6(Switches as disconnect devices)	-	5000	-
Annex L-7(Plugs as disconnect devices)	-	5000	-
Annex L-8(Multiple power sources)	-	5000	-
Annex L-9(Compliance criteria)	-	5000	-
Annex N(Electrochemical potentials (V))	-	5000	-
Annex O(Measurement of creepage distances and clearances)	-	5000	-
Annex P-1(General-Safeguards against conductive objects)	-	5000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	5000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	5000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	5000	-
Annex Q-1(Limited power source)	-	5000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	5000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	5000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	5000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	5000	-
Annex S-4(Flammability classification of materials)	-	5000	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	5000	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	5000	-
Annex E-1(Electrical energy source classification for audio signals)	-	5000	-
Annex E-2(Audio signals used during test)	-	5000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	5000	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	5000	-
Annex J-2(Type tests)	-	5000	-
Annex J-3(Testing during manufacturing)	-	5000	-
Annex V-1(Accessible parts of equipment)	-	5000	-
Annex V-2(Accessible part criterion)	-	5000	-
Annex G-1(Switches)	-	5000	-
Annex G-2(Relays)	-	5000	-
Annex G-3(Protective devices)	-	5000	-
Annex G-4(Connectors)	-	5000	-
Annex G-5(Wound components)	-	5000	-
Annex G-6(Wire insulation)	-	5000	-
Annex G-7(Mains power supply cords and interconnection cables)	-	5000	-
Annex G-8(Varistors)	-	5000	-
Annex G-9(Integrated circuit (IC) current limiters)	-	5000	-
Annex G-10(Resistors)	-	5000	-
Annex G-11(Capacitors and RC units)	-	5000	-
Annex G-12(Optocouplers)	-	5000	-
Annex G-13(Printed boards)	-	5000	-
Annex G-14(Coatings on component terminals)	-	5000	-
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	5000	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	5000	-
Annex T-1(General-Mechanical strength tests)	-	5000	-
Annex T-2(Steady force test, 10 N)	-	5000	-
Annex T-3(Steady force test, 30 N)	-	5000	-
Annex T-4(Steady force test, 100 N)	-	5000	-
Annex T-5(Steady force test, 250 N)	-	5000	-
Annex T-6(Enclosure impact test)	-	5000	-
Annex T-7(Drop test)	-	5000	-
Annex T-8(Stress relief test)	-	5000	-
Annex T-9(Glass impact test)	-	5000	-
Annex T-10(Glass fragmentation test)	-	5000	-
Annex T-11(Test for telescoping or rod antennas)	-	5000	-
Annex D-2(Antenna interface test generator)	-	5000	-
Annex D-3(Electronic pulse generator)	-	5000	-
Annex M-1(General requirements)	-	5000	-
Annex M-2(Safety of batteries and their cells)	-	5000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	5000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	5000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	5000	-
Annex M-6(Safeguards against short-circuits)	-	5000	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	5000	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	5000	-
Annex M-9(Preventing electrolyte spillage)	-	5000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	5000	-
Annex R(Limited short-circuit test)	-	5000	-
Annex W(Comparison of terms introduced in this document)	-	5000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	5000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	5000	-
Annex Y-3(Resistance to corrosion)	-	5000	-
Annex Y-4(Gaskets)	-	5000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	5000	-
Annex Y-6(Mechanical strength of enclosures)	-	5000	-

05 Aug, 2027

-
Included w.e.f. 31.12.2025 "Annex C-1 (Protection of materials in equipment from UV radiation) Annex C-2 (UV light conditioning test) Annex U (""Mechanical strength of CRTs and protection against the effects of implosion"") Annex Y-2 (Resistance to UV radiation) Cl-10.1 (General-Radiation) Cl-10.2 (Radiation energy source classifications) Cl-10.3 (Safeguards against laser radiation) Cl-10.4 (""Safeguards against optical radiation from lamps and lamp systems (including LED types)"") Cl-10.5 (Safeguards against X-radiation) Cl-10.6 (Safeguards against acoustic energy sources) Cl-7.1 (General- Injury caused by hazardous substances) Cl-7.2 (Reduction of exposure to hazardous substances) Cl-7.3 (Ozone exposure) Cl-7.4 (Use of personal safeguards or personal protective equipment (PPE) Cl-7.5 (Use of instructional safeguards and instructions) "

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	1000	20% Discount to BIS
5(General conditions for the tests)	-	1000	20% Discount to BIS
6(Classification- IS 302-1)	-	1000	20% Discount to BIS
7(Marking and instructions)	-	1000	20% Discount to BIS
8.1.1(Protection against live parts in all positions)	-	1000	20% Discount to BIS
8.1.2(Protection against live parts in openings)	-	1000	20% Discount to BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	20% Discount to BIS
8.1.4(Protection against live parts against protective impedance)	-	1000	20% Discount to BIS
8.1.5(Live parts of built-in appliances)	-	1000	20% Discount to BIS
10.1(Power input)	-	1000	20% Discount to BIS
10.2(Current input)	-	1000	20% Discount to BIS
11.1(General)	-	1000	20% Discount to BIS
11.2(General)	-	1000	20% Discount to BIS
11.3(Heating)	-	1000	20% Discount to BIS
11.4(Heating appliances)	-	1000	20% Discount to BIS
11.5(Motor-operated appliances)	-	1000	20% Discount to BIS
11.6(Combined appliances)	-	1000	20% Discount to BIS
11.7(Duration corresponding)	-	1000	20% Discount to BIS
11.8(Temperature rise)	-	1000	20% Discount to BIS
12(Charging of metal-ion batteries)	-	1000	20% Discount to BIS
13(Leakage current and electric strength at operating temperature)	-	1000	20% Discount to BIS
13.2(Leakage current at operating temperature)	-	1000	20% Discount to BIS
13.3(Electric Strength at operating temperature)	-	1000	20% Discount to BIS
14(Transient Over Voltages)	-	1000	20% Discount to BIS
15.0(Moisture resistance)	-	1000	20% Discount to BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	20% Discount to BIS
15.2(Spillage Test)	-	1000	20% Discount to BIS
15.3(Humidity Test)	-	1000	20% Discount to BIS
16.0(General)	-	1000	20% Discount to BIS
16.1(General)	-	1000	20% Discount to BIS
16.2(Leakage Current (after Clause 15))	-	1000	20% Discount to BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	20% Discount to BIS
16(Leakage current and electric strength)	-	1000	20% Discount to BIS
17(Overload protection of transformers and associated circuits)	-	1000	20% Discount to BIS
19(Abnormal Operation)	-	1000	20% Discount to BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	20% Discount to BIS
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	20% Discount to BIS
21.1(Mechanical Strength, IS 302-1)	-	1000	20% Discount to BIS
21.2(Mechanical Strength, IS 302-1)	-	1000	20% Discount to BIS
21.3(Mechanical Strength, IS 302-1)	-	1000	20% Discount to BIS
22.1(Construction, IS 302-1)	-	1000	20% Discount to BIS
22.5(Construction)	-	1000	20% Discount to BIS
22.6(Construction, IS 302-1)	-	1000	20% Discount to BIS
22.11(Construction, IS 302-1)	-	1000	20% Discount to BIS
22.16(Construction)	-	1000	20% Discount to BIS
22.32(Construction, IS 302-1)	-	1000	20% Discount to BIS
22.42(Construction)	-	1000	20% Discount to BIS
23.1(Internal Wiring, IS 302-1)	-	1000	20% Discount to BIS
23.3(Internal Wiring, IS 302-1)	-	1000	20% Discount to BIS
24(Components)	-	1000	20% Discount to BIS
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
26(Terminals for external conductors)	-	1000	20% Discount to BIS
27.1(Provision for Earthing, IS 302-1)	-	1000	20% Discount to BIS
27.5(Provision for Earthing, IS 302-1)	-	1000	20% Discount to BIS
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
28(Screw test and connections)	-	1000	20% Discount to BIS
28.1(Screws and connections)	-	1000	20% Discount to BIS
29(clearance, creepage distances and solid insulation)	-	1000	20% Discount to BIS
30.1(Ball pressure test)	-	1000	20% Discount to BIS
30.2(Glow Wire Test)	-	1000	20% Discount to BIS
31(Resistance to Rusting)	-	1000	20% Discount to BIS
17(Over Load Protection of Transformers and associated circuits)	-	1000	20% Discount to BIS
19.17(Abnormal Operation, IS 302-1)	-	1000	20% Discount to BIS
25.6(Supply connection and external flexible cords, IS 302-1)	-	1000	20% Discount to BIS
26.5(Terminals for external conductors)	-	1000	20% Discount to BIS
30.2(Needle Flame Test)	-	1000	20% Discount to BIS
15.2(Moisture resistance)	-	1000	20% Discount to BIS
A.2(Earth continuity test)	-	1000	20% Discount to BIS
Annex C(Ageing test on motors)	-	1000	20% Discount to BIS
Annex D(Thermal motor protectors)	-	1000	20% Discount to BIS
22.2(Construction, IS 302-1)	-	1000	20% Discount to BIS
22.3(Construction, IS 302-1)	-	1000	20% Discount to BIS
B.22.4(Construction, IS 302-1)	-	1000	20% Discount to BIS
B.22.5(Construction, IS 302-1)	-	1000	20% Discount to BIS

05 Aug, 2027

-
Included w.e.f 25.03.2025 Exclusion: Cl 19.11.4.1 to Cl 19.11.4.7 (EMI/EMC), Cl 32 (Radiation Toxicity and Similar Hazards) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Tests)	-	2000	20% Discount to BIS
4(Requirements)	-	2000	20% Discount to BIS
5.1(Inputting of text)	-	2000	20% Discount to BIS
5.2(Message Readability)	-	2000	20% Discount to BIS
6(Marking)	-	2000	20% Discount to BIS
6(Marking)	-	2000	20% Discount to BIS
"Cl.6.1 "(Marking)	-	2000	20% Discount to BIS
"Cl.6.2 "(BIS Certification Marking)	-	2000	20% Discount to BIS

05 Aug, 2027

-
-

IS 302 : Part 2 : Sec 8 (1994)

Safety of household and similar electrical appliances : part 2 particular requirements, section 8 electrical shavers hair, clippers and similar appliances

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	1000	20% discount to BIS
6(Classification)	-	1000	20% discount to BIS
7(Marking/ Marking & Instructions)	-	1000	20% discount to BIS
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	20% discount to BIS
9(Starting Of Motor Operated Appliances)	-	1000	20% discount to BIS
10(Power Input & Current)	-	1000	20% discount to BIS
11(Temperature Rise/Heating)	-	1000	20% discount to BIS
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	20% discount to BIS
14(Radio and Television Interference Suppression/ Transient Over Voltage)	-	1000	20% discount to BIS
15(Moisture Resistance)	-	1000	20% discount to BIS
16(Leakage Current and Electric Strength)	-	1000	20% discount to BIS
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	20% discount to BIS
18(Endurance)	-	1000	20% discount to BIS
19(Abnormal Operation)	-	1000	20% discount to BIS
20(Stability & Mechanical Hazards)	-	1000	20% discount to BIS
21(Mechanical strength)	-	1000	20% discount to BIS
22(Construction)	-	1000	20% discount to BIS
23(Internal wiring)	-	1000	20% discount to BIS
24(Component)	-	1000	20% discount to BIS
25(Supply Connection & External Flexible Cables and Cords)	-	1000	20% discount to BIS
26(Terminals For External Conductors)	-	1000	20% discount to BIS
27(Provision For Earthing)	-	1000	20% discount to BIS
28(Screws & Connection)	-	1000	20% discount to BIS
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	20% discount to BIS
30(Resistance to Heat & Fire)	-	1000	20% discount to BIS
31(Resistance to Rusting)	-	1000	20% discount to BIS
19.11.4.1(Electrostatic discharges)	-	1000	20% discount to BIS
19.11.4.2(Radiated fields)	-	1000	20% discount to BIS
19.11.4.3(Fast transient bursts)	-	1000	20% discount to BIS
19.11.4.4(Surge immunity test)	-	1000	20% discount to BIS
19.11.4.5(Immunity to conducted discharges)	-	1000	20% discount to BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	20% discount to BIS
19.11.4.7(Harmonics)	-	1000	20% discount to BIS

05 Aug, 2027

-
Cl.19.11.4.1 to Cl.19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 76 (1999)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 76 electric fence energizers

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
CL. 1.1(VOLTAGE)	-	1000	20% discount to BIS
Cl.6.1 OF IS:302-1:2008(Classification)	-	1000	20% discount to BIS
Cl.6.2 OF IS:302-1:2008(Classification)	-	1000	20% discount to BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.2(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.3(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.3(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.3(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.4(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.5(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.12.2 OF IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.12.3 & IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.12.4 OF IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.12.5 OF IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.12.6 OF IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.12.7 OF IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.12.8 OF IS:302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.16 of IS 302-1:2008(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.101(Marking and Instructions)	-	1000	20% discount to BIS
Cl.7.102(Marking and Instructions)	-	1000	20% discount to BIS
Cl.8.1 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	1000	20% discount to BIS
Cl.8.1.1 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	1000	20% discount to BIS
Cl.8.1.2 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	1000	20% discount to BIS
Cl.8.1.3 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	1000	20% discount to BIS
Cl.8.1.4 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	1000	20% discount to BIS
Cl.10.1 OF IS:302-1:2008(Power Input and Current)	-	1000	20% discount to BIS
Cl.11.2 OF IS:302-1:2008(Heating)	-	1000	20% discount to BIS
Cl.11.3 OF IS:302-1:2008(Heating)	-	1000	20% discount to BIS
Cl.11.4 OF IS:302-1:2008(Heating)	-	1000	20% discount to BIS
Cl.11.5 OF IS:302-1:2008(Heating)	-	1000	20% discount to BIS
Cl.11.6 OF IS:302-1:2008(Heating)	-	1000	20% discount to BIS
Cl.11.7 OF IS:302-1:2008(Heating)	-	1000	20% discount to BIS
Cl.11.8 OF IS:302-1:2008(Heating)	-	1000	20% discount to BIS
Cl.13.1 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	1000	20% discount to BIS
Cl.13.2 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	1000	20% discount to BIS
Cl.13.3 OF IS:302-1:2008(Leakage Current & Electric Strength at operating temp.)	-	1000	20% discount to BIS
Cl.14.101 OF IS:302-1:2008(TRANSIENT OVERVOLTAGE)	-	1000	20% discount to BIS
Cl.15 OF IS: 302-1:2008(Moisture Resistance)	-	1000	20% discount to BIS
Cl.15.3 of IS 302-1:200(Moisture Resistance)	-	1000	20% discount to BIS
Cl.16.2 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	1000	20% discount to BIS
Cl.16.3 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	1000	20% discount to BIS
Cl.16.1 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	1000	20% discount to BIS
Cl.16.101 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	1000	20% discount to BIS
Cl.16.102 OF IS:302-1:2008(Leakage Current & Electric Strength)	-	1000	20% discount to BIS
Cl.18(Endurance.)	-	1000	20% discount to BIS
Cl.19 OF IS:302-1:2008(Abnormal Operation.)	-	1000	20% discount to BIS
Cl.19.1 OF IS:302-1:2008(Abnormal Operation.)	-	1000	20% discount to BIS
Cl.19 OF IS:302-1:2008(Abnormal Operation.)	-	1000	20% discount to BIS
Cl.19.11 OF IS:302-1:2008(Abnormal Operation.)	-	1000	20% discount to BIS
Cl.19.101(Abnormal Operation.)	-	1000	20% discount to BIS
Cl.19.102(Abnormal Operation.)	-	1000	20% discount to BIS
Cl.19.103(Abnormal Operation.)	-	1000	20% discount to BIS
Cl.19.104(Abnormal Operation.)	-	1000	20% discount to BIS
Cl.19.105(Abnormal Operation.)	-	1000	20% discount to BIS
Cl.19.106(Abnormal Operation.)	-	1000	20% discount to BIS
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	1000	20% discount to BIS
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	1000	20% discount to BIS
Cl.21.101(Mechanical Strength.)	-	1000	20% discount to BIS
Cl.22.1 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.2 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.3 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.4 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.5 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.6 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.7 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.8 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.9 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.10 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.11(Construction)	-	1000	20% discount to BIS
Cl.22.12 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.13 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.14 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.15 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.16 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.17of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.18 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.19 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.20 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.21 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.22 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.23 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.24 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.25 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.26 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.27 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.28 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.29 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.31 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.32 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.33 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.34 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.35 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.36 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.37 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.38 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.39 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.40 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.41 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.42 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.43 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.44 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.45 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.46 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl.22.47 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS
Cl. 22.101(Construction)	-	1000	20% discount to BIS
Cl. 22.102(Construction)	-	1000	20% discount to BIS
Cl. 22.103(Construction)	-	1000	20% discount to BIS
Cl. 22.104(Construction)	-	1000	20% discount to BIS
Cl. 22.105(Construction)	-	1000	20% discount to BIS
Cl. 22.106(Construction)	-	1000	20% discount to BIS
Cl. 22.107(Construction)	-	1000	20% discount to BIS
Cl. 22.108(Construction)	-	1000	20% discount to BIS
Cl. 22.109(Construction)	-	1000	20% discount to BIS
Cl.23.1 of IS:302-1:2008(Internal Wiring)	-	1000	20% discount to BIS
Cl.23.2 of IS:302-1:2008(Internal Wiring)	-	1000	20% discount to BIS
Cl.23.3 of IS:302-1:2008(Internal Wiring)	-	1000	20% discount to BIS
Cl.23.4 of IS:302-1:2008(Internal Wiring)	-	1000	20% discount to BIS
Cl.23.5 of IS:302-1:2008(Internal Wiring)	-	1000	20% discount to BIS
Cl.23.6 of IS:302-1:2008(Internal Wiring)	-	1000	20% discount to BIS
Cl.23.7 of IS:302-1:2008(Internal Wiring)	-	1000	20% discount to BIS
Cl.23.8 of IS:302-1:2008(Internal Wiring)	-	1000	20% discount to BIS
Cl.23.9 of IS:302-1:2008(Internal Wiring)	-	1000	20% discount to BIS
Cl.23.10 of IS:302-1:2008(Internal Wiring)	-	1000	20% discount to BIS
Cl.24.1 of IS 302-1:2008(Components)	-	1000	20% discount to BIS
Cl.24.1.1 of IS 302-1:2008(Components)	-	1000	20% discount to BIS
Cl.24.1.2 of IS 302-1:2008(Components)	-	1000	20% discount to BIS
Cl.24.1.3 of IS 302-1:2008(Components)	-	1000	20% discount to BIS
Cl.24.1.4 of IS 302-1:2008(Components)	-	1000	20% discount to BIS
Cl.24.1.5 of IS 302-1:2008(Components)	-	1000	20% discount to BIS
Cl.24.1.6 of IS 302-1:2008(Components)	-	1000	20% discount to BIS
Cl.24.2 of IS 302-1:2008(Components)	-	1000	20% discount to BIS
Cl.24.3 of IS 302-1:2008(Components)	-	1000	20% discount to BIS
Cl.24.4 of IS 302-1:2008(Components)	-	1000	20% discount to BIS
Cl.24.5 of IS 302-1:2008(Components)	-	1000	20% discount to BIS
Cl.24.6 of IS 302-1:2008(Components)	-	1000	20% discount to BIS
Cl.25.1 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.1 -ADDITION(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.2 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.3 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.4 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.5 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.6 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.7 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.8 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.9 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.10 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.11 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.12 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.13 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.14 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.15 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.16 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.17 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.18 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.19 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.20 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.21 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.22 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.23 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.24 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.25.25 of IS 302-1:2008(Supply Connection And External Flexible Cords)	-	1000	20% discount to BIS
Cl.26.1 of IS 302-1:2008(Terminals for external conductors)	-	1000	20% discount to BIS
Cl.26.2 of IS 302-1:2008(Terminals for external conductors)	-	1000	20% discount to BIS
Cl.26.3 of IS 302-1:2008(Terminals for external conductors)	-	1000	20% discount to BIS
Cl.26.4 of IS 302-1:2008(Terminals for external conductors)	-	1000	20% discount to BIS
Cl.26.5 of IS 302-1:2008(Terminals for external conductors)	-	1000	20% discount to BIS
Cl.26.6 of IS 302-1:2008(Terminals for external conductors)	-	1000	20% discount to BIS
Cl.26.7 of IS 302-1:2008(Terminals for external conductors)	-	1000	20% discount to BIS
Cl.26.8 of IS 302-1:2008(Terminals for external conductors)	-	1000	20% discount to BIS
Cl.26.9 of IS 302-1:2008(Terminals for external conductors)	-	1000	20% discount to BIS
Cl.26.10 of IS 302-1:2008(Terminals for external conductors)	-	1000	20% discount to BIS
Cl.26.11 of IS 302-1:2008(Terminals for external conductors)	-	1000	20% discount to BIS
Cl.26.101(Terminals for external conductors)	-	1000	20% discount to BIS
Cl.26.102(Terminals for external conductors)	-	1000	20% discount to BIS
Cl.26.103(Terminals for external conductors)	-	1000	20% discount to BIS
Cl.27.1 of IS 302-1:2008(Provision For Earthing)	-	1000	20% discount to BIS
Cl.27.2 of IS 302-1:2008(Provision For Earthing)	-	1000	20% discount to BIS
Cl.27.3 of IS 302-1:2008(Provision For Earthing)	-	1000	20% discount to BIS
Cl.27.4 of IS 302-1:2008(Provision For Earthing)	-	1000	20% discount to BIS
Cl.27.5 of IS 302-1:2008(Provision For Earthing)	-	1000	20% discount to BIS
Cl.27.6 of IS 302-1:2008(Provision For Earthing)	-	1000	20% discount to BIS
Cl.28.1 of IS 302-1:2008(Screws and connections)	-	1000	20% discount to BIS
Cl.28.2 of IS 302-1:2008(Screws and connections)	-	1000	20% discount to BIS
Cl.28.3 of IS 302-1:2008(Screws and connections)	-	1000	20% discount to BIS
Cl.28.4 of IS 302-1:2008(Screws and connections)	-	1000	20% discount to BIS
CL.29.1 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	1000	20% discount to BIS
CL.29 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	1000	20% discount to BIS
CL.29.2 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	1000	20% discount to BIS
CL.29.3 of IS 302-1:2008("Clearances, Creepage distances and solid insulation")	-	1000	20% discount to BIS
CL.30.1 of IS 302-1:2008(Resistance to heat and fire)	-	1000	20% discount to BIS
CL.30.2 of IS 302-1:2008(Resistance to heat and fire)	-	1000	20% discount to BIS
CL.30.2.1 of IS 302-1:2008(Resistance to heat and fire)	-	1000	20% discount to BIS
CL.30.2.2 of IS 302-1:2008(Resistance to heat and fire)	-	1000	20% discount to BIS
CL.30.2.3 of IS 302-1:2008(Resistance to heat and fire)	-	1000	20% discount to BIS
CL.30.2.4 of IS 302-1:2008(Resistance to heat and fire)	-	1000	20% discount to BIS
CL.31 of IS 302-1:2008(Resistance to Rusting)	-	1000	20% discount to BIS
Cl.8.1.5 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	1000	20% discount to BIS
Cl.8.2 OF IS:302-1:2008(Protection Against Access to Live Parts)	-	1000	20% discount to BIS
Cl.11.5 OF IS:302-1:2008(Heating)	-	1000	20% discount to BIS
Cl.22.48 of IS 302-1:2008(Construction)	-	1000	20% discount to BIS

05 Aug, 2027

-
CL.32 of IS 302-1:2008 (Radiation, toxicity and similar hazards)

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Requirement)	-	1000	20% Discount to BIS
5(General conditions for tests)	-	1000	20% Discount to BIS
6(Classification- IS 302-1)	-	1000	20% Discount to BIS
7(Marking and instructions)	-	1000	20% Discount to BIS
8.1.1(Protection against live parts in all positions)	-	1000	20% Discount to BIS
8.1.2(Protection against live parts in openings)	-	1000	20% Discount to BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	20% Discount to BIS
8.1.4(Protection against live parts against protective impedance)	-	1000	20% Discount to BIS
10.1(Power input)	-	1000	20% Discount to BIS
10.2(Current input)	-	1000	20% Discount to BIS
11.1(General)	-	1000	20% Discount to BIS
11.2(General)	-	1000	20% Discount to BIS
11.3(Heating)	-	1000	20% Discount to BIS
11.4(Heating appliances)	-	1000	20% Discount to BIS
11.5(Motor-operated appliances)	-	1000	20% Discount to BIS
11.6(Combined appliances)	-	1000	20% Discount to BIS
11.7(Duration corresponding)	-	1000	20% Discount to BIS
11.8(Temperature rise)	-	1000	20% Discount to BIS
4(General requirement)	-	1000	20% Discount to BIS
13.1(General)	-	1000	20% Discount to BIS
13.2(Leakage current at operating temperature)	-	1000	20% Discount to BIS
13.3(Electric Strength at operating temperature)	-	1000	20% Discount to BIS
14(Transient Over Voltages)	-	1000	20% Discount to BIS
15.0(General)	-	1000	20% Discount to BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	20% Discount to BIS
15.2(Spillage Test)	-	1000	20% Discount to BIS
15.3(Humidity Test)	-	1000	20% Discount to BIS
16.0(General)	-	1000	20% Discount to BIS
16.1(General)	-	1000	20% Discount to BIS
16.2(Leakage Current (after Clause 15))	-	1000	20% Discount to BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	20% Discount to BIS
17(Over Load Protection of Transformers and associated circuits)	-	1000	20% Discount to BIS
17(Overload protection of transformers and associated circuits)	-	1000	20% Discount to BIS
8.1.5(Live parts of built-in appliances)	-	1000	20% Discount to BIS
19(Abnormal Operation)	-	1000	20% Discount to BIS
19.11.4.1(Electrostatic discharges)	-	200	20% Discount to BIS
19.11.4.2(Radiated fields)	-	200	20% Discount to BIS
19.11.4.3(Fast transient bursts)	-	200	20% Discount to BIS
19.11.4.4(Surge immunity test)	-	200	20% Discount to BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	200	20% Discount to BIS
19.11.4.7(Harmonics)	-	200	20% Discount to BIS
20(Stability test)	-	1000	20% Discount to BIS
21(Mechanical Strength Test)	-	1000	20% Discount to BIS
22(Construction verification related test)	-	1000	20% Discount to BIS
23(General)	-	1000	20% Discount to BIS
24(Components)	-	1000	20% Discount to BIS
25(Supply connection and external flexible cords)	-	1000	20% Discount to BIS
26(Terminals for external conductors)	-	1000	20% Discount to BIS
27(Provision for earthing)	-	1000	20% Discount to BIS
28(Screw test and connections)	-	1000	20% Discount to BIS
29(clearance, creepage distances and solid insulation)	-	1000	20% Discount to BIS
30.1(Ball pressure test)	-	1000	20% Discount to BIS
30.2(Glow Wire Test)	-	1000	20% Discount to BIS
30.2(Needle Flame Test)	-	1000	20% Discount to BIS
31(Resistance to Rusting)	-	1000	20% Discount to BIS
19.11.4.5(Immunity to conducted discharges)	-	200	20% Discount to BIS
16(Leakage current and electric strength)	-	1000	20% Discount to BIS

05 Aug, 2027

-
32 (Radiation Toxicity and Similar Hazards) 9 (Starting of motor operation test requirements and tests) 18 (Endurance Test requirements and tests) 18 (Endurance) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

IS 7098 : Part 1 (1988)

Specification for crosslinked polyethylene insulated pvc sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision)

Category 01

38000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(CONDUCTOR: MATERIALS)	-	0	Rs. 12500/- for Single core unarmoured cable Category-01, Rs. 15000/- for up to 4 cores unarmoured cable Category – 01, Rs. 15000/- for up to 4 cores armoured cable Category – 01
4(INSULATION : MATERIALS)	-	0	Rs. 21000/- for above 4 cores and up to 12 Cores armoured cable Category – 01
5.1(FILLER AND INNER SHEATH)	-	0	Rs. 25000/- for above 12 cores and up to 19 Cores armoured cable Category – 01
5.2(FILLER AND INNER SHEATH)	-	0	Rs. 32500/- for above 19 cores and up to 37 Cores armoured cable Category – 01
6(ARMOURING)	-	0	Rs. 45000/- for above 37 cores and up to 61 Cores armoured cable Category – 01, Rs. 2500/- for optional tests (cold bend / cold impact / Armour Resistance)
7(OUTER SHEATH)	-	0	-
8.1(CONDUCTOR: CONSTRUCTION)	-	0	-
8.2(PROTECTIVE BARRIER)	-	0	-
8.3(SIZE OF NEUTRAL CONDUCTOR)	-	0	-
9.1(Insulation Applied by extrusicn)	-	0	-
9.2(Thickness of Insulation - Average)	-	350	-
9.3(Thickness of Insulation - Minimum)	-	350	-
9.4(Application of Insulation)	-	0	-
10.1(Core Identification)	-	0	-
10.2(Core Identification- Neutral)	-	0	-
10.3(Core Identification by number )	-	0	-
10.4(Core Identification by number - Neutral )	-	0	-
11(LAVING UP OF CORES)	-	0	-
12.1 & 12.2(Inner sheath : Application)	-	0	-
12.3(Thickness of Inner Sheath)	-	300	-
13.1.2(Armouring: Coverage )	-	0	-
13.1.3(Armouring: Direction of Lay )	-	0	-
13.2(Type of armour )	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	300	-
13.3(Armouring : Dimensions -Formed wire )	-	300	-
13.4(Armour: Joint)	-	0	-
13.5(Armouring : Resistance Test)	-	500	-
13.6 a)(ARMOURING: Tensile Strength)	-	350	-
13.6 b)(ARMOURING: Elongation )	-	350	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	350	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	350	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	500	-
13.6 g)(ARMOURING: Resistivity)	-	500	-
14.1(Outer Sheath : Application)	-	0	-
14.2(Colour of outer sheath)	-	0	-
14.3(Thickness of outer sheath - AVERAGE)	-	300	-
14.3(Thickness of outer sheath - minimum)	-	300	-
15.1 a) i)(Annealing Test ( For copper wire ) )	-	500	-
15.1 a) ii)(Tensile test (for aluminium) - Before stranding )	-	350	-
15.1 a) ii)(Tensile test (for aluminium) - After stranding )	-	350	-
15.1 a) iii)(Wrapping test (for aluminium))	-	350	-
15.1 a) iv)(Resistance test - Main conductor)	-	700	-
15.1 a) iv)(Resistance test - Neutral conductor)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Tensile Test)	-	500	-
15.1 d) i) (Phyaical tests for insulation : Elongation)	-	500	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation )	-	1000	-
15.1 e) ii) (Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 e) ii) (Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
15.1 d) ii) (Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	-
15.1 d) ii) (Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	-
15.1 e) i) (Physical tests for outer sheath : Tensile stregth)	-	300	-
15.1 e) i) (Physical tests for outer sheath : Elongation)	-	300	-
15.1 d) iii) (Phyaical tests for insulation : Hot set )	-	500	-
15.1 d) iii) (Phyaical tests for insulation : Permanent set )	-	500	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage )	-	500	-
15.1 d) iv) (Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d) v) (Insulation: Waterabsorption(gravimetric))	-	3500	-
15.1 e) iii) (Sheath: Loss of mass in air oven)	-	2500	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage )	-	300	-
15.1 e) iv) (Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 e) v) (Sheath : Hot deformation)	-	750	-
15.1 e) vi) (Sheath : Heat shock test)	-	350	-
15.1 e) vii) (Sheath : Thermalstability)	-	500	-
15.1 f)(INSULATION RESISTANCE TEST : Volume resistivity )	-	500	-
16.2(HIGH VOLTAGE TEST )	-	1000	-
16.3(FLAMMABILITY TEST : Period of Burning )	-	750	-
16.3(FLAMMABILITY TEST : Unaffected length )	-	750	-
17.1(Manufacturer'. identification)	-	200	-
17.2(cable Indentification )	-	200	-
17.3(cable Code )	-	0	-
15.4 (a)(Cold bend)	-	500	-
15.4 (b)(Cold impact)	-	500	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	1000	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	1000	-
Table 1(Ageing in air oven - Elongation on Insulation)	-	1000	-
Table 1(Ageing in air oven - Tensile strength on Insulation)	-	1000	-
Table 2(Cold Impact test for Outer sheath)	-	500	-
Table 2(Cold bend test for Outer sheath)	-	500	-
13.1(Armouring: Application)	-	0	-

05 Aug, 2027

-
-

IS 1554 : Part 1 (1988)

Specification for pvc insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1100 v (Third Revision)

Category 01

36000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(MATERIALS : CONDUCTOR)	-	0	Rs. 13000/- for Single core unarmoured cable Category-01; Rs. 15000/- for up to 4 cores unarmoured cable Category – 01; Rs. 17000/- for up to 4 cores armoured cable Category – 01; Rs. 21000/- for above 4 cores and up to 12 Cores armoured cable Category –
4.1.1(INSULATION : General Purjose Insulaiion)	-	0	Rs. 13000/- for Single core unarmoured cable Category-01; Rs. 15000/- for up to 4 cores unarmoured cable Category – 01; Rs. 17000/- for up to 4 cores armoured cable Category – 01
4.1.2(INSULATION : Heat Resisting Insulation)	-	0	Rs. 21000/- for above 4 cores and up to 12 Cores armoured cable Category – 01 Rs. 25000/- for above 12 cores and up to 19 Cores armoured cable Category – 01
5.1(MATERIALS : FILLER AND INNER SHEATH)	-	0	Rs. 35000/- for above 19 cores and up to 37 Cores armoured cable Category – 01; Rs. 40000/- for above 37 cores and up to 61 Cores armoured cable Category – 01
5.2(MATERIALS : FILLER AND INNER SHEATH)	-	0	Rs. 2500/- for optional tests (cold bend / cold impact / Armour Resistance)
6.1(MATERIALS : ARMGURING)	-	0	-
6.2(MATERIALS : ARMGURING)	-	0	-
7.1.1(OUTER SHEATH : For Cables with General Purpose InsuIafion)	-	0	-
7.1.2(OUTER SHEATH : For Cables with Heat Resisting InsuIalion)	-	0	-
8.1(CONSTRUCTION : CONDUCTOR)	-	0	-
8.2(CONSTRUCTION : CONDUCTOR)	-	0	-
9.1(INSULATION )	-	500	-
9.2(INSULATION : Thickness of Insulation)	-	500	-
9.3(INSULATION :Tolerance on Thickness of Insulation)	-	0	-
9.4(INSULATION : Application of Insulation)	-	0	-
10.1(CORE IDENTIFICATION)	-	0	-
10.2(CORE IDENTIFICATION)	-	0	-
10.3(CORE IDENTIFICATION)	-	0	-
10.3.1(Arrangement of Marking)	-	0	-
11.1(LAYING UP OF CORES)	-	0	-
11.2(LAYING UP OF CORES)	-	0	-
12.1(INNER SHEATH)	-	0	-
12.2(INNER SHEATH)	-	0	-
12.3(INNER SHEATH :Thickness of Inner Sheath)	-	300	-
12.3.1(INNER SHEATH :Thickness of Inner Sheath)	-	300	-
13.1.1(ARMOURING : Application)	-	0	-
13.1.2(Armouring: Coverage )	-	0	-
13.1.3(ARMOURING : Direction of lay )	-	0	-
13.1.4(ARMOURING : Application)	-	0	-
13.2(ARMOURING : Type of Armour)	-	0	-
13.2.1(ARMOURING : Type of Armour)	-	0	-
13.3(Armouring : Dimensions -Wire Diameter)	-	300	-
13.3(Armouring : Dimensions -Formed wire )	-	300	-
13.4(ARMOURING : Joints)	-	0	-
13.5.1(ARMOURING : Resistance)	-	500	-
13.5.2(ARMOURING : Resistance)	-	500	-
13.6 a)(ARMOURING: Tensile Strength)	-	300	-
13.6 b)(ARMOURING: Elongation )	-	300	-
13.6 c)(ARMOURING: Torsion Test (For round wire ) )	-	300	-
13.6 d)(ARMOURING: Winding Test(For formed wire))	-	300	-
13.6 e)(ARMOURING: Uniformity of zinc coating)	-	500	-
13.6 f)(ARMOURING: Mass of zinc coating )	-	500	-
13.6 g)(ARMOURING: Resistivity)	-	300	-
14.1(OUTER SHEATH)	-	0	-
14.2(OUTER SHEATH)	-	0	-
14.3(OUTER SHEATH : Colour )	-	0	-
14.4.1(Thickness of Outer Sheath : Unarmowed Cables)	-	300	-
14.4.2(Thickness of Outer Sheath : Armoured Cables)	-	300	-
15.1 a) 1)(Tests on conductor : Annealing test ( for copper ))	-	500	-
15.1 a) 2)(Tensile test (for aluminium) - Before stranding )	-	350	-
15.1 a) 2)(Tensile test (for aluminium) - After stranding )	-	350	-
15.1 a) 3)(Tests on conductor : Wrapping test ( for aluminium ))	-	300	-
15.1 a) 4)(Resistance test - Neutral conductor )	-	500	-
15.1 d)1)(Phyaical tests for insulation : Tensile Test)	-	500	-
15.1 d)1)(Phyaical tests for insulation : Elongation )	-	500	-
15.1 d)1)(Physical tests for sheath : Tensile stregth )	-	300	-
15.1 d)1)(Physical tests for sheath : Elongation )	-	300	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air Oven : Tensile Test)	-	1000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air oven : Elongation )	-	1000	-
15.1 d)2)(Phyaical tests for insulation - Ageing in air Oven : Tensile Variation )	-	0	-
15.1 d)2)(Phyaical tests for insulation- Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth )	-	0	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation )	-	0	-
15.1 d)2)(Physical tests for outer sheath- Ageing in air oven : Tensile stregth Variation )	-	0	-
15.1 d)2)(Physical tests for outer sheath -Ageing in air oven : Elongation Variation )	-	0	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage )	-	300	-
15.1 d)3)(Phyaical tests for insulation : Shrinkage - Crack observed )	-	0	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage )	-	300	-
15.1 d)3)(Phyaical tests for Sheath : Shrinkage - Crack observed )	-	0	-
15.1 d)4)(Hot deformation : Insulation )	-	500	-
15.1 d)4)(Hot deformation : Sheath )	-	500	-
15.1 d)5)( Loss of mass in air oven- Insulation )	-	1000	-
15.1 d)5)( Loss of mass in air oven- sheath )	-	1000	-
15.1 d)6)(Heat shock test- Insulation )	-	250	-
15.1 d)6)(Heat shock test- sheath )	-	250	-
15.1 d)7)(Thermal stability- insulation )	-	350	-
15.1 d)7)(Thermal stability- Sheath )	-	350	-
15.1 e)(Insulation resistance test : Volume Resistivity )	-	750	-
15.1 e)(Insulation resistance test : IR Constant )	-	0	-
15.1 f)(High voltage test ( water immersion test ))	-	750	-
15.1 g)(High voltage test at room temperature)	-	500	-
15.1 g)(High voltage test at room temperature)	-	500	-
15.4 a)(Cold bend test- Insulation ( Optional test))	-	500	-
15.4 a)(Cold bend test- Sheath ( Optional test))	-	500	-
15.4 b)(Cold impact test- Insulation ( Optional test))	-	500	-
15.4 b)(Cold impact test- Sheath ( Optional test))	-	500	-
15.4 c)(Armour resistance test ( for other than mining cables ).- Optional test )	-	350	-
16.1(DETAILS OF TESTS : General)	-	0	-
16.2(DETAILS OF TESTS : High Voltage Test at Room Temperature)	-	0	-
16.3.1(High Voltage Test ( Water Immersion Test ) : a.c. Test)	-	750	-
16.3.2(High Voltage Test ( Water Immersion Test ) : d.c. Test)	-	750	-
16.4(Flammability Test)	-	1000	-
17.1(IDENTIFICATION : Manufacturer’s Identification)	-	0	-
17.2(IDENTIFICATION : Cable Identification)	-	0	-
17.2.1(IDENTIFICATION : Cable Identification)	-	0	-
17.3(IDENTIFICATION : Cable Code)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance At Maximum rated temperature temperature)	-	0	-
15.1.e(Insulation resistance Test- Insulation resistance constant At Room temperature)	-	0	-
15.1.e(Insulation resistance Test- Volume Resistivity At Maximum rated temperature temperature)	-	0	-
15.1.e(Insulation resistance Test- Volume Resistivity At Room temperature)	-	0	-
16.4(Flammability Test- Un affected portion)	-	1000	-
16.4(Flammability Test- Period of Burning)	-	1000	-
9.3(Minimum Thickness of Reduce core insulation)	-	0	-
9.2(Thickness of Reduce core insulation)	-	0	-
3.1 Table 2 IS 8130(Number of wires in the conductor)	-	0	-
15.1 a) 4)(Tests on conductor : Conductor resistance test)	-	750	-

05 Aug, 2027

-
-

IS 14255 (1995)

Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification

24500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(Phase/Street Lighting conductor)	-	0	-
4.2(Messenger (Neutral Conductor or Otherwise))	-	0	-
5.1(Insulation)	-	0	-
6.1(Flexibility class)	-	0	-
6.2(Compactness)	-	0	-
6.2(No of strands)	-	0	-
6.2(Surface)	-	0	-
6.3(Protective barrier)	-	0	-
6.4(size of street lighting conductor)	-	0	-
6.5(Size of messenger conductor )	-	0	-
6.6(Joints in messenger conductor )	-	0	-
6.6(Direction of outer layer)	-	0	-
7.1(Insulation)	-	0	-
7.2( Thickness of insulation)	-	500	-
7.3(Tolerance on thickness of insulation )	-	0	-
7.4(Aplication of the insulation )	-	0	-
7.5(Colour of the insulation )	-	0	-
8.1(Core identification)	-	250	-
8.2(Core identification)	-	250	-
8.3(Identification by other means)	-	250	-
9.1(Assembly (Laying up))	-	0	-
9.2(Assembly (Laying up))	-	0	-
9.3(Direction of lay)	-	0	-
10.1 a) i)(Tests on phase/street light conductor: tensile test - Test method IS10810:Part 2)	-	500	-
10.1 a) ii)(Wrapping test - 10810: Part 3)	-	250	-
10.1 a) iii)(Resistance test - IS10810: Part 5)	-	500	-
10.1 b) i)(Test on messenger conductor: Breaking load - IS 10810: Part 2)	-	750	-
10.1 b) ii)(Test on messenger conductor: Elongation test - Cl 11.3)	-	750	-
10.1 b) iii)(Test on messenger conductor: Resistance test - IS 10810: Part 5)	-	750	-
10.1 c) i)(Physical tests for XLPE Insulation: Tensile strength - IS 10810: Part 7)	-	500	-
10.1 c) i)(Physical tests for XLPE Insulation: elongation at break - IS 10810: part 7)	-	500	-
10.1 c) ii)(Ageing in air oven : Tensile strength variation - IS 10810:Part 11)	-	1500	-
10.1 c) ii)(Ageing in air oven : Elongation variation- IS 10810: Part 11)	-	1500	-
10.1 c) iii)(Hot set test: Elongation under load - IS 10810: Part 30)	-	700	-
10.1 c) iii)(Hot set test: Permanent elongation (set) after cooling - IS 10810: Part 30)	-	700	-
10.1 c) iv)(Shrinkage test : Shrinkage - 10810:Part 12)	-	500	-
10.1 c) iv)(Shrinkage test : Crack Observed - 10810:Part 12)	-	200	-
10.1 c) v)(Water ahsorption (Gravimetric) - IS 10810: Part 33 )	-	3000	-
10.1 d) i)(Physical test for PE insulation: Tensile strength - IS 10810: Part 7 )	-	1000	-
10.1 d) i)(Physical test for PE insulation: elongation at break - IS 10810: Part 7)	-	1000	-
10.1 d) ii)(Melt flow index- IS 10810: Part 23)	-	1500	-
10.1 d) iv)(Vicat softening point -IS 10810: Part 22)	-	1000	-
10.1 d) v)(Environmental stress cracking -IS 10810:Part29)	-	3000	-
10.1 f)(Insulation resistance (Volume resistivity) test a) volume resistivity at 27°C - IS 10810: Part 43)	-	750	-
10.1 f)(Insulation resistance (Volume resistivity) test b) volume resistivity at 70°C - IS 10810: Part 43)	-	750	-
10.1 g)(High voltage test - IS10810:Part 45)	-	750	-
11.4(Bending Test on the Completed Cable ( Optional) )	-	750	-
11.4(Bending Test on the Completed Cable ( Optional))	-	750	-
10.1 d) iii)(Carbon Black Content)	-	1000	-

05 Aug, 2027

-
-

IS 398 : Part 4 (1994)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Freedom from Defects)	-	250	-
7.1 Table-1(Dimensional measurement of wires)	-	1000	-
7.2.2 Table-2, Table-4(Calculated resistance of Stranded Conductor)	-	1000	-
9.2 Table 3(Lay Ratio of stranded conductors)	-	1000	-
9.3(Direction of Lay)	-	1000	-
12.2 Table 1(Breaking Load Test- Before Stranding)	-	1200	-
12.2 Table 1(Breaking Load Test- After Stranding)	-	1200	-
12.3 Table 1(Elongation Test- Before Stranding)	-	1000	-
12.3 Table 1(Elongation Test- After Stranding)	-	1000	-
12.4 Table 1(Resistance of Aluminium wire)	-	1000	-
9.2(Lay Ratio 24 wire layer)	-	500	-
9.2(Lay Ratio 18 wire layer)	-	500	-
9.2(Lay Ratio 12 wire layer)	-	500	-
9.2(Lay Ratio 3/6 wire layer)	-	500	-
8.1(Joints in wires-Conductors Containing Seven Wires)	-	0	-
8.2(Joints in wires-Conductors Containing More Than Seven Wires)	-	0	-
9.1(Stranding)	-	0	-
9.4(Multiple layers of wires)	-	0	-
11(Packing and Marking)	-	0	-
7.2.1(Sizes)	-	0	-

05 Aug, 2027

-
-

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

Plasma/LCD/LED TVs of Screen size upto & including 105"

50000 View breakup
Rs.35,000/-for Bluetooth Speakers Rs.35,000/-for Smart Speakers (With and Without Display) Rs.35,000/-for Webcam (Finished Product) Rs.35,000/-for Video Camera Rs.35,000/-for Wireless Microphone Rs.35,000/-for Television other than Plasma/ LCD/LED TVs Rs.35,000/-for Amplifiers with input power 2000W and above Rs.35,000/-for Wireless Headphone and Earphone. Rs.28,000/- for Electronics Games (Video) Rs.50,000/- for Plasma/ LCD/ LED TVs of screen size up to & including 36" Rs.29,000/- for Optical Disc Players with built in amplifiers of input power 200W Rs.48,500/- for Electronic Musical System with input power 200W Rs.52,500/- for Power Adaptors for Audio, Video & Similar Electronic Apparatus. Rs.48000/- for Electronic Musical Systems with input power 200W and above ( 20% Discount to BIS).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	2000	20% Discount to BIS
6(Hazardous radiations)	-	0	N/A
7(Heating under normal operating conditions)	-	2000	20% Discount to BIS
8(Constructional requirements with regard to the protection against electric shock)	-	3000	20% Discount to BIS
9(Electric shock hazard under normal operating conditions)	-	3000	20% Discount to BIS
10(Insulation requirements)	-	4000	20% Discount to BIS
11(Fault conditions)	-	4000	20% Discount to BIS
12(Mechanical strength)	-	4000	20% Discount to BIS
13(CLEARANCES and CREEPAGE DISTANCES)	-	3000	20% Discount to BIS
14(Components)	-	0	For Component Verification only
15(TERMINALS)	-	2000	20% Discount to BIS
16(External flexible cords)	-	2000	20% Discount to BIS
17(Electrical connections and mechanical fixings)	-	3000	20% Discount to BIS
19(Stability and mechanical hazards)	-	3000	20% Discount to BIS
20(Resistance to fire)	-	4000	20% Discount to BIS

05 Aug, 2027

-
REVISED VERSION OF IS 616:2017 INCLUDED W.E.F. 08-10-2021. Ionizing radiation (Cl.6.1), Laser radiation (Cl.6.2), Components (Cl.14), Mechanical strength of picture tubes and protection against the effect of implosion(Cl.18)

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

50000 View breakup
Rs.35,000/-for Digital Camera, Rs.35,000/-for Standalone Switch Mode Power Supplies (SMPS)with output voltage 48 V (max) Rs.35,000/-for USB Type External Solid- State Storage Devices above 256 GB capacity) Rs.35,000/-for USB Type External Hard Disk Drive Rs.35,000/-for Automatic Teller Cash Dispensing Machines Rs.35,000/-for Keyboard Rs.35,000/-for Smart Matches Rs.35,000/-for USB driven Barcode readers, barcode scanners, Iris scanners, Optical fingerprint scanners. Rs.48,000/- for Laptop/Notebook/Tablets Rs.51,000/- for Visual display units, video monitors of screen size up to & including 36” Rs.50,000/- for Printers, plotters Rs.48,000/- for Scanners Rs.50,000/- for Wireless Key boards Rs.35,000/- for Telephone answering machines Rs.50,000/- for Automatic Data processing machines Rs.52,500/- for Power adapter for IT equipment’s Rs.40,000/- for Mobile Phones Rs.48,000/- for Cash counting Machine Rs.45,000/- for Point of sale terminals Rs.50,000/- for Copying machines/ duplicators Rs.50,000/- for Smart Card Reader Rs.50,000/- for Mail processing machines/postage machines/Franking machines Rs.50,000/- for Passport reader Rs.60,000/- for Set Top Box Rs.50,000/- for Power banks for use in portable applications. Rs.35000/- for CCTV Cameras/CCTV recorders, Cash Registers (20% discount to BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.5(Components)	-	0	For Component Verification only
1.6(Power interface .)	-	3000	20% Discount to BIS
1.7(Markings and instructions)	-	2000	20% Discount to BIS
2.1(Protection from electric shock and energy hazards)	-	2000	20% Discount to BIS
2.2(SELV circuits)	-	2000	20% Discount to BIS
2.3(TNV circuits)	-	2000	20% Discount to BIS
2.4(Limited current circuits)	-	2000	20% Discount to BIS
2.5(Limited power sources .)	-	2000	20% Discount to BIS
2.6(Provisions for earthing and bonding)	-	2000	20% Discount to BIS
2.7(Overcurrent and earth fault protection in primary circuits)	-	2000	20% Discount to BIS
2.8(Safety interlocks)	-	2000	20% Discount to BIS
2.9(Electrical insulation)	-	2000	20% Discount to BIS
2.10(Clearances, creepage distances and distances through insulation)	-	2000	20% Discount to BIS
3.1(General)	-	1500	20% Discount to BIS
3.2(Connection to a mains supply)	-	1500	20% Discount to BIS
3.3(Wiring terminals for connection of external conductors)	-	1500	20% Discount to BIS
3.4(Disconnection from the mains supply)	-	1500	20% Discount to BIS
3.5(Interconnection of equipment)	-	1500	20% Discount to BIS
4.1(Stability)	-	1500	20% Discount to BIS
4.2(Mechanical strength)	-	1500	20% Discount to BIS
4.3(Design and construction)	-	1500	20% Discount to BIS
4.4(Protection against hazardous moving parts)	-	1500	20% Discount to BIS
4.5(Thermal requirements)	-	2000	20% Discount to BIS
4.6(Openings in enclosures)	-	1500	20% Discount to BIS
4.7(Resistance to fire)	-	2000	20% Discount to BIS
5.1(Touch current and protective conductor curren)	-	2000	20% Discount to BIS
5.2(Electric strength)	-	2000	20% Discount to BIS
5.3(Abnormal operating and fault conditions)	-	2000	20% Discount to BIS
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	2000	20% Discount to BIS
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	2000	20% Discount to BIS
6.3(Protection of the telecommunication wiring system from overheating)	-	2000	20% Discount to BIS
7.1(General)	-	2000	20% Discount to BIS
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	2000	20% Discount to BIS
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	2000	20% Discount to BIS
7.4(Insulation between primary circuits and cable distribution systems)	-	2000	20% Discount to BIS
4.3.13.5(LED, laser class)	-	0	20% Discount to BIS

05 Aug, 2027

-
Component (Cl.1.5), Evaluation of IC current limiter (Annex CC), Cathode ray tubes (Cl.4.2.8), Batteries (Cl.4.3.8), Ionizing radiation (Cl.4.3.13.2), Effect of UV radiation on materials (Cl. 4.3.13.3), Human exposure to UV radiation (Cl.4.3.13.4), Laser (including LED) (Cl.4.3.13.5)

IS 10322 : Part 5 : Sec 1 (2012)

Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General Test Requireements)	-	3000	20% Discount to BIS
5(Classification of Luminaires')	-	3000	20% Discount to BIS
6.0(Marking)	-	2000	20% Discount to BIS
7.0(Construction)	-	2000	20% Discount to BIS
8.0(Creepage Distance and Clearances)	-	2000	20% Discount to BIS
9.0(Provision for earthing)	-	2000	20% Discount to BIS
10.0(Terminals)	-	2000	20% Discount to BIS
11.0(External & Internal Wiring)	-	2000	20% Discount to BIS
12.0(Protection against electric shock)	-	2000	20% Discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	2000	20% Discount to BIS
14.0(Resistance to Dust & Moisture)	-	2000	20% Discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	2000	20% Discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	2000	20% Discount to BIS

05 Aug, 2027

-
• Restricted up to 5 Nm as per Cl.4.12.1 of IS 10322-1:2014. EXCLUSIONS: UV Radiations for metal halide lamps (Cl.4.24) (Annex-P), Short Circuit Protection (Cl.4.26.2), Photometry Test (Cl.17).

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	2000	20% Discount to BIS
8(Protection against accidental contact with live parts)	-	2000	20% Discount to BIS
9(Terminals)	-	2000	20% Discount to BIS
10(PROVISION FOR EARTHING)	-	2000	20% Discount to BIS
11(MOISTURE RESISTANCE)	-	2000	20% Discount to BIS
12(Electric Strength)	-	2000	20% Discount to BIS
13(Thermal endurance test for winding of ballasts)	-	2000	20% Discount to BIS
14(Fault conditions)	-	2000	20% Discount to BIS
15(Transformer heating)	-	2000	20% Discount to BIS
16(Construction)	-	2000	20% Discount to BIS
17(Creepage distance and clearances)	-	2000	20% Discount to BIS
18(Screws, current carrying parts and connections)	-	2000	20% Discount to BIS
19(Resistance to heat, fire and tracking)	-	2000	20% Discount to BIS
20(Resistance to corrosion)	-	1500	20% Discount to BIS

05 Aug, 2027

-
-

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	3000	20% Discount to BIS
6(Interchangeability)	-	2000	20% Discount to BIS
7(Protection against accidental contact with live parts)	-	2000	20% Discount to BIS
8(Insulation Resistance and Electric Strength)	-	2000	20% Discount to BIS
9(MECHANICAL STRENGTH)	-	2000	20% Discount to BIS
10(cap temperature)	-	2000	20% Discount to BIS
11(Resistance to Heat)	-	2000	20% Discount to BIS
12(Resistance to Flame and Ignition)	-	2000	20% Discount to BIS
13(Fault conditions)	-	2000	20% Discount to BIS
14(Creepage distance and clearances)	-	2000	20% Discount to BIS

05 Aug, 2027

-
-

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	0	-
7(Marking and instructions)	-	1000	20% Discount to BIS
8(Protection against live parts)	-	1000	20% Discount to BIS
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	1000	20% Discount to BIS
11(HEATING)	-	1000	20% Discount to BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	20% Discount to BIS
14(IMPULSE VOLTAGE TEST)	-	1000	20% Discount to BIS
15(HUMIDITY TREATMENT TEST)	-	2000	20% Discount to BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	20% Discount to BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	20% Discount to BIS
18(ENDURANCE)	-	5000	20% Discount to BIS
19(ABNORMAL OPERATION)	-	2000	20% Discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	20% Discount to BIS
21(MECHANICAL STRENGTH)	-	1000	20% Discount to BIS
22(CONSTRUCTION)	-	1000	20% Discount to BIS
23(INTERNAL WIRING)	-	1000	20% Discount to BIS
24(COMPONENTS)	-	1000	20% Discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	20% Discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	20% Discount to BIS
27(PROVISION FOR EARTHING)	-	1000	20% Discount to BIS
28(SCREWS AND CONNECTIONS)	-	1000	20% Discount to BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	20% Discount to BIS
30(RESISTANCE TO HEAT AND FIRE)	-	1000	20% Discount to BIS
31(RESISTANCE TO RUSTING)	-	1000	20% Discount to BIS
22.32(Oxygen bomb for rubber material)	-	1000	20% Discount to BIS
22.46(Software)	-	1000	20% Discount to BIS
6.0(Classification)	-	0	-
7(Marking and instructions)	-	1000	20% Discount to BIS
8(Protection against live parts)	-	1000	20% Discount to BIS
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
10(POWER INPUT AND CURRENT)	-	1000	20% Discount to BIS
11(HEATING)	-	1000	20% Discount to BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	20% Discount to BIS
14(IMPULSE VOLTAGE TEST)	-	1000	20% Discount to BIS
15(HUMIDITY TREATMENT TEST)	-	2000	20% Discount to BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	20% Discount to BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	20% Discount to BIS
18(ENDURANCE)	-	5000	20% Discount to BIS
19(ABNORMAL OPERATION)	-	2000	20% Discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	20% Discount to BIS
21(MECHANICAL STRENGTH)	-	1000	20% Discount to BIS
22(CONSTRUCTION)	-	1000	20% Discount to BIS
23(INTERNAL WIRING)	-	1000	20% Discount to BIS
24(COMPONENTS)	-	1000	20% Discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	20% Discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	20% Discount to BIS
27(PROVISION FOR EARTHING)	-	1000	20% Discount to BIS
28(SCREWS AND CONNECTIONS)	-	1000	20% Discount to BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	20% Discount to BIS
30(RESISTANCE TO HEAT AND FIRE)	-	1000	20% Discount to BIS
31(RESISTANCE TO RUSTING)	-	1000	20% Discount to BIS
22.32(Oxygen bomb for rubber material)	-	1000	20% Discount to BIS
22.46(Software)	-	1000	20% Discount to BIS

05 Aug, 2027

-
-

IS 398 : Part 2 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	750	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	750	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.7.2 (elec)(Uniformity of Zinc coating)	-	750	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.7.2 (elec)(Mass of Zinc coating)	-	750	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	250	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	250	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	250	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	250	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	300	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	300	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	300	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	300	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
10 (elec)(Stranding)	-	0	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (mech)(Ductility by Torsion Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	750	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	750	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.7.2 (elec)(Uniformity of Zinc coating)	-	750	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.7.2 (elec)(Mass of Zinc coating)	-	750	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	300	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	300	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	300	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	300	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	250	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	250	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	250	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	250	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
10 (elec)(Stranding)	-	0	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	350	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	500	Only upto 100 sqmm Rs. 10000/- up to & including 100 sqmm
13.4.2 (elec)(Ductility by Elongation Test before stranding)	-	-	-
13.4.2 (elec)(Ductility by Elongation Test after stranding)	-	-	-
13.6 (elec)(Resistance test-Aluminium wire before Stranding)	-	-	-
13.6 (elec)(Resistance test-Aluminium wire after stranding)	-	-	-
13.7.2 (elec)(Uniformity of Zinc coating)	-	-	-
13.7.2 (elec)(Mass of Zinc coating)	-	-	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	-	-
13.5.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	-	-
13.5.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	-	-
13.5.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	-	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires After Stranding)	-	-	-
13.3 Table 1 (elec)(Breaking Load of Steel Wires Before Stranding)	-	-	-
13.8 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	-	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors with 3 Aluminium Wire Layers)	-	-	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	-	-
13.8 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	-	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	-	-
13.4.1 (elec)(Ductility by Torsion Test after stranding)	-	-	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	-	-
13.4.1 (elec)(Ductility by Torsion Test before stranding)	-	-	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	-	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	-	-
13.3 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	-	-
13.3 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	-	-
10 (elec)(Stranding)	-	-	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires After Stranding)	-	-	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires After Stranding)	-	-	-
8.1.1 & 13.2 Table 2 (elec)(Diameter of Steel Wires Before Stranding)	-	-	-
8.1.1 & 13.2 Table-1 (elec)(Diameter of Aluminium Wires Before Stranding)	-	-	-
13.4.1 (mech)(Ductility by Torsion Test before stranding)	-	-	-

05 Aug, 2027

-
-

IS 398 : Part 1 (1996)

Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Freedom from defects)	-	300	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	1200	-
12.3, Table-1(Breaking load before stranding)	-	1200	-
12.3, Table-1(Breaking load after stranding)	-	1200	-
12.4(Wrapping test)	-	1200	-
12.5, Table 1(Resistance test)	-	1200	-
12.6, Table 3(Measurement of lay ratio)	-	1200	-
6(Freedom from defects)	-	250	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	1200	-
12.3, Table-1(Breaking load before stranding)	-	1200	-
12.3, Table-1(Breaking load after stranding)	-	1200	-
12.4(Wrapping test)	-	1200	-
12.5, Table 1(Resistance test)	-	1200	-
12.6, Table 3(Measurement of lay ratio)	-	1200	-
9.3(Stranding)	-	0	-
7.2.1(Sizes)	-	200	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	0	-
9.2(Lay ratio)	-	200	-
9.4(Multiple layer of wires)	-	200	-
7.2.2(Resistance)	-	500	-
7.1.1(Nominal Sizes)	-	200	-
6(Freedom from defects)	-	250	-
12.2, Table-1(Measurement of diameter of individual aluminium wire)	-	1200	-
12.3, Table-1(Breaking load before stranding)	-	1200	-
12.3, Table-1(Breaking load after stranding)	-	1200	-
12.4(Wrapping test)	-	1200	-
12.5, Table 1(Resistance test)	-	1200	-
12.6, Table 3(Measurement of lay ratio)	-	1200	-
9.3(Stranding)	-	0	-
7.2.1(Sizes)	-	200	-
8, 8.1, 8.2(Joint in wires, except during stranding)	-	0	-
9.2(Lay ratio)	-	200	-
9.4(Multiple layer of wires)	-	200	-
7.2.2(Resistance)	-	500	-
7.1.1(Nominal Sizes)	-	200	-

05 Aug, 2027

-
-

Bureau of Indian Standards

The National Standards Body of India

Bharti Automation Pvt. Ltd.(A Testing Division), Gurugram

Plot no. 354,Sector-7, IMT Manesar, Gurgaon, Gurgaon, Gurugram, Haryana, 122050

9711337466 ashok@bhartiautomation.com

Scope List