BIS - LIMS (Laboratory Information Management System)

Reset

4 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 ii a(Expansion by Le Chatelier)	-	3000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	3000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	3000	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	3000	-

02 Apr, 2029

-
-

IS 3812 (Part 1) (2013)

Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6.1, Table 1 - viii( Loss on ignition - IS 1727)	-	1000	-
Cl. 6.1, Table 1 - iv(Magnesium oxide (MgO) - IS 1727)	-	1000	-
Cl. 6.2(Moisture content of the fly ash when supplied in dry condition - Annex D)	-	1000	-
Cl. 6.1, Table 1 - ii(Silicon dioxide (SiO2) - IS 1727)	-	1000	-
Cl. 6.1, Table 1 - i(Silicon dioxide (SiO2) plus aluminium oxide (Al2O3) plus ironoxide (Fe2O3) - IS 1727)	-	3000	-
Cl. 6.1, Table 1 - v( Total sulphur as sulphur trioxide (SO3) - IS 1727)	-	2000	-
7.1-Table 2(iv)(PHYSICAL REQUIREMENTS-Compressive strength at 28 days)	-	3000	-
7.1-Table 2(i)(PHYSICAL REQUIREMENTS-Fineness)	-	2000	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	3000	-
7.1-Table 2(ii)(PHYSICAL REQUIREMENTS-Particles retained on 45 micron IS sieve)	-	2000	-
5.1&7.1, table-2 (III)(Lime Reactivity)	-	3000	-
5.1, 7.1, table-2, iii(Lime reacitivity)	-	3000	-

02 Apr, 2029

-
-

IS 14871 (2000)

Products in fibre reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding - Specification

Type A

117000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.4.1(dimensions)	-	4000	-
5.4.2.1, Table-1(Breaking load)	-	10000	-
5.4.2.2(Deflection)	-	3000	-
5.4.3.1(Impermeability)	-	10000	-
5.4.3.2(Frost resistance)	-	50000	-
5.4.3.3(Apparent density)	-	5000	-
5.4.3.4(warm water)	-	35000	-

02 Apr, 2029

-
-

IS 14862 (2000)

Fibre cement flat sheets - specification

Type A & B

189000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2.2(Apparent Density)	-	5000	-
6.1(For TypeA sheets - Bending Strength)	-	5000	-
6.3(For TypeA sheets - Frost Resistance)	-	50000	-
6.6( Heat-Rain)	-	50000	-
5.1.1(Nominal Length )	-	500	-
5.1.1(Nominal Width)	-	500	-
6.5(For TypeA sheets - Soak-Dry)	-	30000	-
5.1.4.2(Squareness of edges)	-	500	-
5.1.4.1(Straightness of edges - Length )	-	500	-
5.1.4.1(Straightness of edges - Width )	-	500	-
5.1.2(Thickness)	-	500	-
6.4(For TypeA sheets - Warm Water)	-	30000	-
6.2(For TypeA sheets - Water Impermeability)	-	10000	-
4.1(CLASSIFICATION)	-	500	-
4.2(CLASSIFICATION -The sheets are further classified into five categories)	-	500	-
5.2.1(Bending Strength)	-	5000	-

02 Apr, 2029

-
-

Bureau of Indian Standards