BIS - LIMS (Laboratory Information Management System)

Classic Testing & Research Centre (B17), Noida

B-17, Sector-65, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

7982333919 cbcd@classiclabindia.com

Scope List

Reset

60 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 11951 (2024)

PUMPSET FOR DIRECT EVAPORATIVE AIR COOLER â SPECIFICATION (Second Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1(Non-Submersible Pumpset)	-	1000	-
5.1.2(Submersible Pumpset)	-	1000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Discharge Head, m)	-	3000	-
6.1, 7.3, 9.1, 9.4.2,Table-1(Minimum Discharge, l/min)	-	3000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Type 1 Motor Wattage)	-	3000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Type 2 Motor Wattage)	-	3000	-
6.1, 7.3, 9.1, 9.4.2, Table-2(Motor Wattage)	-	3000	-
6.1, 7.3, 9.1,9.4.2, Table-2(Minimum Discharge Head, Hd)	-	3000	-
6.1, 7.3, 9.1, 9.4.2,Table-2(Discharge Measurement Height, h)	-	3000	-
6.1, 7.3, 9.1, 9.4.2, Table-2(Minimum, Discharge*)	-	3000	-
Cl-8(GENERAL REQUIREMENTS)	-	1000	-
9.2(Tests on motor)	-	3000	-
9.3(Water Requirement)	-	3000	-
9.4.1(Reliability Tests)	-	10000	-
9.4.3(Ingress protection test)	-	3000	-
9.4.6(Dry Run Test)	-	5000	-
9.5(Routine Test)	-	3000	-
9.6(Type Test)	-	3000	-
9.7(Leakage current and electric strength at operating temperature)	-	3000	-
9.7(Moisture resistance)	-	3000	-
9.7(Leakage current and electric strength)	-	3000	-
5.1.1(Non-Submersible Pumpset)	-	3000	-
5.1.2(Submersible Pumpset)	-	3000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Discharge Head, m)	-	3000	-
6.1, 7.3, 9.1, 9.4.2,Table-1(Minimum Discharge, l/min)	-	3000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Type 1 Motor Wattage)	-	3000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Type 2 Motor Wattage)	-	3000	-
6.1, 7.3, 9.1, 9.4.2, Table-2(Motor Wattage)	-	3000	-
6.1, 7.3, 9.1,9.4.2, Table-2(Minimum Discharge Head, Hd)	-	3000	-
6.1, 7.3, 9.1, 9.4.2,Table-2(Discharge Measurement Height, h)	-	3000	-
6.1, 7.3, 9.1, 9.4.2, Table-2(Minimum, Discharge*)	-	3000	-
Cl-8(GENERAL REQUIREMENTS)	-	500	-
9.2(Tests on motor)	-	3000	-
9.3(Water Requirement)	-	3000	-
9.4.1(Reliability Tests)	-	3000	-
9.4.3(Ingress protection test)	-	5000	-
9.4.6(Dry Run Test)	-	3000	-
9.5(Routine Test)	-	3000	-
9.6(Type Test)	-	3000	-
9.7(Leakage current and electric strength at operating temperature)	-	3000	-
9.7(Moisture resistance)	-	3000	-
9.7(Leakage current and electric strength)	-	3000	-
5.1.1(Non-Submersible Pumpset)	-	3000	-
5.1.2(Submersible Pumpset)	-	3000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Discharge Head, m)	-	3000	-
6.1, 7.3, 9.1, 9.4.2,Table-1(Minimum Discharge, l/min)	-	3000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Type 1 Motor Wattage)	-	3000	-
6.1, 7.3, 9.1, 9.4.2, Table-1(Type 2 Motor Wattage)	-	3000	-
6.1, 7.3, 9.1, 9.4.2, Table-2(Motor Wattage)	-	3000	-
6.1, 7.3, 9.1,9.4.2, Table-2(Minimum Discharge Head, Hd)	-	3000	-
6.1, 7.3, 9.1, 9.4.2,Table-2(Discharge Measurement Height, h)	-	3000	-
6.1, 7.3, 9.1, 9.4.2, Table-2(Minimum, Discharge*)	-	3000	-
Cl-8(GENERAL REQUIREMENTS)	-	1000	-
9.2(Tests on motor)	-	3000	-
9.3(Water Requirement)	-	3000	-
9.4.1(Reliability Tests)	-	3000	-
9.4.3(Ingress protection test)	-	3000	-
9.4.6(Dry Run Test)	-	3000	-
9.5(Routine Test)	-	3000	-
9.6(Type Test)	-	3000	-
9.7(Leakage current and electric strength at operating temperature)	-	3000	-
9.7(Moisture resistance)	-	3000	-
9.7(Leakage current and electric strength)	-	3000	-

15 Oct, 2027

-
Included w.e.f 07.11.2025

IS 996 (2009)

Single phase a.c. induction motors for general purpose (Third Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
10(Type of enclosures)	-	500	-
11(Methods of cooling)	-	1000	-
9.1(General construction (as per Cl. 9 & F-3))	-	1000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	1000	-
4.1(Rated Voltage)	-	500	-
4.2(Rated Frequency)	-	500	-
4.3(Rated Output)	-	500	-
4.4(Rated Speed)	-	500	-
7(Dimensions (Cl.App.F-4))	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
17.3 (a)(No load test at rated voltage and frequency )	-	1500	-
17.3 (a)(No load test at rated voltage and frequency)	-	1500	-
17.3 (a)(No load test at rated voltage and frequency)	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.7(Insulation resistance test)	-	1500	-
13.1(High voltage test)	-	1500	-
13.2(Moisture proofness)	-	1500	-
13.2(Moisture proofness)	-	1500	-
13.3(Leakage current test)	-	1500	-
12.6(Vibration Severity)	-	1500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	1500	-
15.1.5(Noise Level)	-	1500	-
15.2(Specific Requirements)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
10(Type of enclosures)	-	1000	-
11(Methods of cooling)	-	1000	-
9.1(General construction (as per Cl. 9 & F-3))	-	1000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	1000	-
4.1(Rated Voltage)	-	500	-
4.2(Rated Frequency)	-	500	-
4.3(Rated Output)	-	500	-
4.4(Rated Speed)	-	500	-
9.5(Earthing)	-	1000	-
9.5(Earthing)	-	1000	-
9.5(Earthing)	-	1000	-
17.3 (a)(No load test at rated voltage and frequency )	-	1500	-
17.3 (a)(No load test at rated voltage and frequency)	-	1500	-
17.3 (a)(No load test at rated voltage and frequency)	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.7(Insulation resistance test)	-	1500	-
13.1(High voltage test)	-	1500	-
13.2(Moisture proofness)	-	1500	-
13.2(Moisture proofness)	-	1500	-
13.3(Leakage current test)	-	1500	-
12.6(Vibration Severity)	-	1500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	1500	-
15.1.5(Noise Level)	-	1500	-
15.2(Specific Requirements)	-	1500	-
9.0(Observation)	-	500	-
7.2(Dimensions)	-	500	-
11.0(Observation)	-	500	-
17.3 (j)(Observation)	-	500	-
9.5(Observation)	-	500	-
14.0(Observation)	-	500	-
16.0(Observation)	-	500	-
17.4 & 9.4.6.1(Observation)	-	500	-
17.3 (k)(Current)	-	1000	-
17.3 (m)(Vibration)	-	1000	-
17.3 (g)(Insulation Resistance)	-	1000	-
17.3 (h)(Voltage)	-	1000	-
17.3 (b)(Temperature)	-	1000	-
17.3 (e)(Temperature)	-	1000	-
17.3 (f)(Torque)	-	1000	-
17.3 (c)(Current, Torque)	-	1000	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	1000	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	1000	-
14(Terminal marking)	-	500	-
12.1.2(Momentary overload for motors)	-	1000	-
16(Observation)	-	500	-
14(Observation)	-	500	-
9.5(Observation)	-	500	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	1000	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	1000	-
17.3 (c)(Current, Torque)	-	1000	-
17.3 (f)(Torque)	-	1000	-
17.3 (e)(Temperature)	-	1000	-
17.3 (b)(Temperature)	-	1000	-
17.3 (h)(Voltage)	-	1000	-
17.3 (g)(Insulation Resistance)	-	1000	-
17.3 (m)(Vibration)	-	1000	-
17.3 (j)(Observation)	-	500	-
17.3 (k)(Current)	-	1000	-
11(Observation)	-	500	-
17.4 & 9.4.6.1(Observation)	-	500	-
7.2(Dimensions)	-	1000	-
9(Observation)	-	500	-
16(Observation)	-	500	-
14(Observation)	-	500	-
9.5(Observation)	-	500	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	1000	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	1000	-
17.3 (c)(Current, Torque)	-	1000	-
17.3 (f)(Torque)	-	1000	-
17.3 (e)(Temperature)	-	1000	-
17.3 (b)(Temperature)	-	1000	-
17.3 (h)(Voltage)	-	1000	-
17.3 (g)(Insulation Resistance)	-	1000	-
17.3 (m)(Vibration)	-	1000	-
17.3 (j)(Observation)	-	1000	-
17.3 (k)(Current)	-	1000	-
11(Observation)	-	500	-
17.4 & 9.4.6.1(Observation)	-	500	-
7.2(Dimensions)	-	1000	-
9(Observation)	-	500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
10(Type of enclosures)	-	1500	-
11(Methods of cooling)	-	1500	-
9.1(General construction (as per Cl. 9 & F-3))	-	1500	-
9(General construction (as per Cl. 9 & F-3))	-	1500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1500	-
9(General construction (as per Cl. 9 & F-3))	-	1500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1500	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	1500	-
4.1(Rated Voltage)	-	1500	-
4.2(Rated Frequency)	-	1500	-
4.3(Rated Output)	-	1500	-
4.4(Rated Speed)	-	1500	-
7(Dimensions (Cl.App.F-4))	-	1500	-
9.5(Earthing)	-	1500	-
9.5(Earthing)	-	1500	-
9.5(Earthing)	-	1500	-
17.3 (a)(No load test at rated voltage and frequency )	-	1500	-
17.3 (a)(No load test at rated voltage and frequency)	-	1500	-
17.3 (a)(No load test at rated voltage and frequency)	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.7(Insulation resistance test)	-	1500	-
13.1(High voltage test)	-	1500	-
13.2(Moisture proofness)	-	1500	-
13.2(Moisture proofness)	-	1500	-
13.3(Leakage current test)	-	1500	-
12.6(Vibration Severity)	-	1500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	1500	-
15.1.5(Noise Level)	-	1500	-
15.2(Specific Requirements)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
10(Type of enclosures)	-	1500	-
11(Methods of cooling)	-	1500	-
9.1(General construction (as per Cl. 9 & F-3))	-	1500	-
9(General construction (as per Cl. 9 & F-3))	-	1500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1500	-
9(General construction (as per Cl. 9 & F-3))	-	1500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1500	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	1500	-
4.1(Rated Voltage)	-	1500	-
4.2(Rated Frequency)	-	1500	-
4.3(Rated Output)	-	1500	-
4.4(Rated Speed)	-	1500	-
9.5(Earthing)	-	1500	-
9.5(Earthing)	-	1500	-
9.5(Earthing)	-	1500	-
17.3 (a)(No load test at rated voltage and frequency )	-	1500	-
17.3 (a)(No load test at rated voltage and frequency)	-	1500	-
17.3 (a)(No load test at rated voltage and frequency)	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.7(Insulation resistance test)	-	1500	-
13.1(High voltage test)	-	1500	-
13.2(Moisture proofness)	-	1500	-
13.2(Moisture proofness)	-	1500	-
13.3(Leakage current test)	-	1500	-
12.6(Vibration Severity)	-	1500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	1500	-
15.1.5(Noise Level)	-	1500	-
15.2(Specific Requirements)	-	1500	-
14(Terminal marking)	-	1500	-
12.1.2(Momentary overload for motors)	-	1500	-
16(Observation)	-	1500	-
14(Observation)	-	1500	-
9.5(Observation)	-	1500	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	1500	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	1500	-
17.3 (c)(Current, Torque)	-	1500	-
17.3 (f)(Torque)	-	1500	-
17.3 (e)(Temperature)	-	1500	-
17.3 (b)(Temperature)	-	1500	-
17.3 (h)(Voltage)	-	1500	-
17.3 (g)(Insulation Resistance)	-	1500	-
17.3 (m)(Vibration)	-	1500	-
17.3 (j)(Observation)	-	1500	-
17.3 (k)(Current)	-	1500	-
11(Observation)	-	1500	-
17.4 & 9.4.6.1(Observation)	-	1500	-
7.2(Dimensions)	-	1500	-
9(Observation)	-	1500	-
16(Observation)	-	1500	-
14(Observation)	-	1500	-
9.5(Observation)	-	1500	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	1500	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	1500	-
17.3 (c)(Current, Torque)	-	1500	-
17.3 (f)(Torque)	-	1500	-
17.3 (e)(Temperature)	-	1500	-
17.3 (b)(Temperature)	-	1500	-
17.3 (h)(Voltage)	-	1500	-
17.3 (g)(Insulation Resistance)	-	1500	-
17.3 (m)(Vibration)	-	1500	-
17.3 (j)(Observation)	-	1500	-
17.3 (k)(Current)	-	1500	-
11(Observation)	-	1500	-
17.4 & 9.4.6.1(Observation)	-	1500	-
7.2(Dimensions)	-	1500	-
9(Observation)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
10(Type of enclosures)	-	1000	-
11(Methods of cooling)	-	1000	-
9.1(General construction (as per Cl. 9 & F-3))	-	1000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	1000	-
4.1(Rated Voltage)	-	1000	-
4.2(Rated Frequency)	-	500	-
4.3(Rated Output)	-	500	-
4.4(Rated Speed)	-	500	-
7(Dimensions (Cl.App.F-4))	-	1500	-
9.5(Earthing)	-	1500	-
9.5(Earthing)	-	1500	-
9.5(Earthing)	-	1500	-
17.3 (a)(No load test at rated voltage and frequency )	-	1500	-
17.3 (a)(No load test at rated voltage and frequency)	-	1500	-
17.3 (a)(No load test at rated voltage and frequency)	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.7(Insulation resistance test)	-	1500	-
13.1(High voltage test)	-	1500	-
13.2(Moisture proofness)	-	1500	-
13.2(Moisture proofness)	-	1500	-
13.3(Leakage current test)	-	1500	-
12.6(Vibration Severity)	-	1500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	500	-
15.1.5(Noise Level)	-	1500	-
15.2(Specific Requirements)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
16.1(Marking and Diagram of connenctions)	-	1000	-
10(Type of enclosures)	-	1000	-
11(Methods of cooling)	-	1000	-
9.1(General construction (as per Cl. 9 & F-3))	-	1000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1000	-
9(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1000	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	1000	-
4.1(Rated Voltage)	-	1000	-
4.2(Rated Frequency)	-	1000	-
4.3(Rated Output)	-	1000	-
4.4(Rated Speed)	-	1000	-
9.5(Earthing)	-	1500	-
9.5(Earthing)	-	1500	-
9.5(Earthing)	-	1500	-
17.3 (a)(No load test at rated voltage and frequency )	-	1000	-
17.3 (a)(No load test at rated voltage and frequency)	-	1000	-
17.3 (a)(No load test at rated voltage and frequency)	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1000	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1000	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.7(Insulation resistance test)	-	1500	-
13.1(High voltage test)	-	1500	-
13.2(Moisture proofness)	-	1500	-
13.2(Moisture proofness)	-	1500	-
13.3(Leakage current test)	-	1500	-
12.6(Vibration Severity)	-	1500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	1500	-
15.1.5(Noise Level)	-	1500	-
15.2(Specific Requirements)	-	1500	-
14(Terminal marking)	-	1500	-
12.1.2(Momentary overload for motors)	-	1500	-
16(Observation)	-	1000	-
14(Observation)	-	1000	-
9.5(Observation)	-	1000	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	1500	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	1500	-
17.3 (c)(Current, Torque)	-	1500	-
17.3 (f)(Torque)	-	1500	-
17.3 (e)(Temperature)	-	1500	-
17.3 (b)(Temperature)	-	1500	-
17.3 (h)(Voltage)	-	1500	-
17.3 (g)(Insulation Resistance)	-	1500	-
17.3 (m)(Vibration)	-	1500	-
17.3 (j)(Observation)	-	1500	-
17.3 (k)(Current)	-	1500	-
11(Observation)	-	1500	-
17.4 & 9.4.6.1(Observation)	-	1000	-
7.2(Dimensions)	-	1000	-
9(Observation)	-	1000	-
16(Observation)	-	10000	-
14(Observation)	-	1000	-
9.5(Observation)	-	1000	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	1500	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	1500	-
17.3 (c)(Current, Torque)	-	1500	-
17.3 (f)(Torque)	-	1500	-
17.3 (e)(Temperature)	-	1500	-
17.3 (b)(Temperature)	-	1500	-
17.3 (h)(Voltage)	-	1500	-
17.3 (g)(Insulation Resistance)	-	1500	-
17.3 (m)(Vibration)	-	1500	-
17.3 (j)(Observation)	-	1500	-
17.3 (k)(Current)	-	1500	-
11(Observation)	-	1500	-
17.4 & 9.4.6.1(Observation)	-	1500	-
7.2(Dimensions)	-	1500	-
9(Observation)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
10(Type of enclosures)	-	1500	-
11(Methods of cooling)	-	1500	-
9.1(General construction (as per Cl. 9 & F-3))	-	1500	-
9(General construction (as per Cl. 9 & F-3))	-	1500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1500	-
9(General construction (as per Cl. 9 & F-3))	-	1500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1500	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	1500	-
4.1(Rated Voltage)	-	1500	-
4.2(Rated Frequency)	-	1500	-
4.3(Rated Output)	-	1500	-
4.4(Rated Speed)	-	1500	-
7(Dimensions (Cl.App.F-4))	-	1500	-
9.5(Earthing)	-	1500	-
9.5(Earthing)	-	1500	-
9.5(Earthing)	-	1500	-
17.3 (a)(No load test at rated voltage and frequency )	-	1500	-
17.3 (a)(No load test at rated voltage and frequency)	-	1500	-
17.3 (a)(No load test at rated voltage and frequency)	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.7(Insulation resistance test)	-	1500	-
13.1(High voltage test)	-	1500	-
13.2(Moisture proofness)	-	1500	-
13.2(Moisture proofness)	-	1500	-
13.3(Leakage current test)	-	1500	-
12.6(Vibration Severity)	-	1500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	1500	-
15.1.5(Noise Level)	-	1500	-
15.2(Specific Requirements)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	1500	-
10(Type of enclosures)	-	1500	-
11(Methods of cooling)	-	1500	-
9.1(General construction (as per Cl. 9 & F-3))	-	1500	-
9(General construction (as per Cl. 9 & F-3))	-	1500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1500	-
9(General construction (as per Cl. 9 & F-3))	-	1500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	1500	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	1500	-
4.1(Rated Voltage)	-	1500	-
4.2(Rated Frequency)	-	1500	-
4.3(Rated Output)	-	1500	-
4.4(Rated Speed)	-	1500	-
9.5(Earthing)	-	1500	-
9.5(Earthing)	-	1500	-
9.5(Earthing)	-	1500	-
17.3 (a)(No load test at rated voltage and frequency )	-	1500	-
17.3 (a)(No load test at rated voltage and frequency)	-	1500	-
17.3 (a)(No load test at rated voltage and frequency)	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	1500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	1500	-
12.7(Insulation resistance test)	-	1500	-
13.1(High voltage test)	-	1500	-
13.2(Moisture proofness)	-	1500	-
13.2(Moisture proofness)	-	1500	-
13.3(Leakage current test)	-	1500	-
12.6(Vibration Severity)	-	1500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	1500	-
15.1.5(Noise Level)	-	1500	-
15.2(Specific Requirements)	-	1500	-
14(Terminal marking)	-	1500	-
12.1.2(Momentary overload for motors)	-	1500	-
16(Observation)	-	1500	-
14(Observation)	-	1500	-
9.5(Observation)	-	1500	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	1500	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	1500	-
17.3 (c)(Current, Torque)	-	1500	-
17.3 (f)(Torque)	-	1500	-
17.3 (e)(Temperature)	-	1500	-
17.3 (b)(Temperature)	-	1500	-
17.3 (h)(Voltage)	-	1500	-
17.3 (g)(Insulation Resistance)	-	1500	-
17.3 (m)(Vibration)	-	1500	-
17.3 (j)(Observation)	-	1500	-
17.3 (k)(Current)	-	1500	-
11(Observation)	-	1500	-
17.4 & 9.4.6.1(Observation)	-	1500	-
7.2(Dimensions)	-	1500	-
9(Observation)	-	1500	-
16(Observation)	-	1500	-
14(Observation)	-	1500	-
9.5(Observation)	-	1500	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	1500	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	1500	-
17.3 (c)(Current, Torque)	-	1500	-
17.3 (f)(Torque)	-	1500	-
17.3 (e)(Temperature)	-	1500	-
17.3 (b)(Temperature)	-	1500	-
17.3 (h)(Voltage)	-	1500	-
17.3 (g)(Insulation Resistance)	-	1500	-
17.3 (m)(Vibration)	-	1500	-
17.3 (j)(Observation)	-	1500	-
17.3 (k)(Current)	-	1500	-
11(Observation)	-	1500	-
17.4 & 9.4.6.1(Observation)	-	1500	-
7.2(Dimensions)	-	1500	-
9(Observation)	-	1500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
10(Type of enclosures)	-	500	-
11(Methods of cooling)	-	500	-
9.1(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	500	-
4.1(Rated Voltage)	-	500	-
4.2(Rated Frequency)	-	500	-
4.3(Rated Output)	-	500	-
4.4(Rated Speed)	-	500	-
7(Dimensions (Cl.App.F-4))	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
17.3 (a)(No load test at rated voltage and frequency )	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.7(Insulation resistance test)	-	500	-
13.1(High voltage test)	-	500	-
13.2(Moisture proofness)	-	500	-
13.2(Moisture proofness)	-	500	-
13.3(Leakage current test)	-	500	-
12.6(Vibration Severity)	-	500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	500	-
15.1.5(Noise Level)	-	500	-
15.2(Specific Requirements)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
10(Type of enclosures)	-	500	-
11(Methods of cooling)	-	500	-
9.1(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	500	-
4.1(Rated Voltage)	-	500	-
4.2(Rated Frequency)	-	500	-
4.3(Rated Output)	-	500	-
4.4(Rated Speed)	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
17.3 (a)(No load test at rated voltage and frequency )	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.7(Insulation resistance test)	-	500	-
13.1(High voltage test)	-	500	-
13.2(Moisture proofness)	-	500	-
13.2(Moisture proofness)	-	500	-
13.3(Leakage current test)	-	500	-
12.6(Vibration Severity)	-	500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	500	-
15.1.5(Noise Level)	-	500	-
15.2(Specific Requirements)	-	500	-
14(Terminal marking)	-	500	-
12.1.2(Momentary overload for motors)	-	500	-
16(Observation)	-	500	-
14(Observation)	-	500	-
9.5(Observation)	-	500	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	500	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	500	-
17.3 (c)(Current, Torque)	-	500	-
17.3 (f)(Torque)	-	500	-
17.3 (e)(Temperature)	-	500	-
17.3 (b)(Temperature)	-	500	-
17.3 (h)(Voltage)	-	500	-
17.3 (g)(Insulation Resistance)	-	500	-
17.3 (m)(Vibration)	-	500	-
17.3 (j)(Observation)	-	500	-
17.3 (k)(Current)	-	500	-
11(Observation)	-	500	-
17.4 & 9.4.6.1(Observation)	-	500	-
7.2(Dimensions)	-	500	-
9(Observation)	-	500	-
16(Observation)	-	500	-
14(Observation)	-	500	-
9.5(Observation)	-	500	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	500	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	500	-
17.3 (c)(Current, Torque)	-	500	-
17.3 (f)(Torque)	-	500	-
17.3 (e)(Temperature)	-	500	-
17.3 (b)(Temperature)	-	500	-
17.3 (h)(Voltage)	-	500	-
17.3 (g)(Insulation Resistance)	-	500	-
17.3 (m)(Vibration)	-	500	-
17.3 (j)(Observation)	-	500	-
17.3 (k)(Current)	-	500	-
11(Observation)	-	500	-
17.4 & 9.4.6.1(Observation)	-	500	-
7.2(Dimensions)	-	500	-
9(Observation)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
10(Type of enclosures)	-	500	-
11(Methods of cooling)	-	500	-
9.1(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	500	-
4.1(Rated Voltage)	-	500	-
4.2(Rated Frequency)	-	500	-
4.3(Rated Output)	-	500	-
4.4(Rated Speed)	-	500	-
7(Dimensions (Cl.App.F-4))	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
17.3 (a)(No load test at rated voltage and frequency )	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.7(Insulation resistance test)	-	500	-
13.1(High voltage test)	-	500	-
13.2(Moisture proofness)	-	500	-
13.2(Moisture proofness)	-	500	-
13.3(Leakage current test)	-	500	-
12.6(Vibration Severity)	-	500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	500	-
15.1.5(Noise Level)	-	500	-
15.2(Specific Requirements)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
10(Type of enclosures)	-	500	-
11(Methods of cooling)	-	500	-
9.1(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	500	-
4.1(Rated Voltage)	-	500	-
4.2(Rated Frequency)	-	500	-
4.3(Rated Output)	-	500	-
4.4(Rated Speed)	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
17.3 (a)(No load test at rated voltage and frequency )	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.7(Insulation resistance test)	-	500	-
13.1(High voltage test)	-	500	-
13.2(Moisture proofness)	-	500	-
13.2(Moisture proofness)	-	500	-
13.3(Leakage current test)	-	500	-
12.6(Vibration Severity)	-	500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	500	-
15.1.5(Noise Level)	-	500	-
15.2(Specific Requirements)	-	500	-
14(Terminal marking)	-	500	-
12.1.2(Momentary overload for motors)	-	500	-
16(Observation)	-	500	-
14(Observation)	-	500	-
9.5(Observation)	-	500	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	500	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	500	-
17.3 (c)(Current, Torque)	-	500	-
17.3 (f)(Torque)	-	500	-
17.3 (e)(Temperature)	-	500	-
17.3 (b)(Temperature)	-	500	-
17.3 (h)(Voltage)	-	500	-
17.3 (g)(Insulation Resistance)	-	500	-
17.3 (m)(Vibration)	-	500	-
17.3 (j)(Observation)	-	500	-
17.3 (k)(Current)	-	500	-
11(Observation)	-	500	-
17.4 & 9.4.6.1(Observation)	-	500	-
7.2(Dimensions)	-	500	-
9(Observation)	-	500	-
16(Observation)	-	500	-
14(Observation)	-	500	-
9.5(Observation)	-	500	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	500	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	500	-
17.3 (c)(Current, Torque)	-	500	-
17.3 (f)(Torque)	-	500	-
17.3 (e)(Temperature)	-	500	-
17.3 (b)(Temperature)	-	500	-
17.3 (h)(Voltage)	-	500	-
17.3 (g)(Insulation Resistance)	-	500	-
17.3 (m)(Vibration)	-	500	-
17.3 (j)(Observation)	-	500	-
17.3 (k)(Current)	-	500	-
11(Observation)	-	500	-
17.4 & 9.4.6.1(Observation)	-	500	-
7.2(Dimensions)	-	500	-
9(Observation)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
10(Type of enclosures)	-	500	-
11(Methods of cooling)	-	500	-
9.1(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	500	-
4.1(Rated Voltage)	-	500	-
4.2(Rated Frequency)	-	500	-
4.3(Rated Output)	-	500	-
4.4(Rated Speed)	-	500	-
7(Dimensions (Cl.App.F-4))	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
17.3 (a)(No load test at rated voltage and frequency )	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.7(Insulation resistance test)	-	500	-
13.1(High voltage test)	-	500	-
13.2(Moisture proofness)	-	500	-
13.2(Moisture proofness)	-	500	-
13.3(Leakage current test)	-	500	-
12.6(Vibration Severity)	-	500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	500	-
15.1.5(Noise Level)	-	500	-
15.2(Specific Requirements)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
10(Type of enclosures)	-	500	-
11(Methods of cooling)	-	500	-
9.1(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	500	-
4.1(Rated Voltage)	-	500	-
4.2(Rated Frequency)	-	500	-
4.3(Rated Output)	-	500	-
4.4(Rated Speed)	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
17.3 (a)(No load test at rated voltage and frequency )	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.7(Insulation resistance test)	-	500	-
13.1(High voltage test)	-	500	-
13.2(Moisture proofness)	-	500	-
13.2(Moisture proofness)	-	500	500
13.3(Leakage current test)	-	500	-
12.6(Vibration Severity)	-	500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	500	-
15.1.5(Noise Level)	-	500	-
15.2(Specific Requirements)	-	500	-
14(Terminal marking)	-	500	-
12.1.2(Momentary overload for motors)	-	500	-
16(Observation)	-	500	-
14(Observation)	-	500	-
9.5(Observation)	-	500	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	500	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	500	-
17.3 (c)(Current, Torque)	-	500	-
17.3 (f)(Torque)	-	500	-
17.3 (e)(Temperature)	-	500	-
17.3 (b)(Temperature)	-	500	-
17.3 (h)(Voltage)	-	500	-
17.3 (g)(Insulation Resistance)	-	500	-
17.3 (m)(Vibration)	-	500	-
17.3 (j)(Observation)	-	500	-
17.3 (k)(Current)	-	500	-
11(Observation)	-	500	-
17.4 & 9.4.6.1(Observation)	-	500	-
7.2(Dimensions)	-	500	-
9(Observation)	-	500	-
16(Observation)	-	500	-
14(Observation)	-	500	-
9.5(Observation)	-	500	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	500	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	500	-
17.3 (c)(Current, Torque)	-	500	-
17.3 (f)(Torque)	-	500	-
17.3 (e)(Temperature)	-	500	-
17.3 (b)(Temperature)	-	500	-
17.3 (h)(Voltage)	-	500	-
17.3 (g)(Insulation Resistance)	-	500	-
17.3 (m)(Vibration)	-	500	-
17.3 (j)(Observation)	-	500	-
17.3 (k)(Current)	-	500	-
11(Observation)	-	500	-
17.4 & 9.4.6.1(Observation)	-	500	-
7.2(Dimensions)	-	500	-
9(Observation)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
10(Type of enclosures)	-	500	-
11(Methods of cooling)	-	500	-
9.1(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	500	-
4.1(Rated Voltage)	-	500	-
4.2(Rated Frequency)	-	500	-
4.3(Rated Output)	-	500	-
4.4(Rated Speed)	-	500	-
7(Dimensions (Cl.App.F-4))	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
17.3 (a)(No load test at rated voltage and frequency )	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.7(Insulation resistance test)	-	500	-
13.1(High voltage test)	-	500	-
13.2(Moisture proofness)	-	500	-
13.2(Moisture proofness)	-	500	-
13.3(Leakage current test)	-	500	-
12.6(Vibration Severity)	-	500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	500	-
15.1.5(Noise Level)	-	500	-
15.2(Specific Requirements)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
10(Type of enclosures)	-	500	-
11(Methods of cooling)	-	500	-
9.1(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	500	-
4.1(Rated Voltage)	-	500	-
4.2(Rated Frequency)	-	500	-
4.3(Rated Output)	-	500	-
4.4(Rated Speed)	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
17.3 (a)(No load test at rated voltage and frequency )	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.7(Insulation resistance test)	-	500	-
13.1(High voltage test)	-	500	-
13.2(Moisture proofness)	-	500	-
13.2(Moisture proofness)	-	500	-
13.3(Leakage current test)	-	500	-
12.6(Vibration Severity)	-	500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	500	-
15.1.5(Noise Level)	-	500	-
15.2(Specific Requirements)	-	500	-
14(Terminal marking)	-	500	-
12.1.2(Momentary overload for motors)	-	500	-
16(Observation)	-	500	-
14(Observation)	-	500	-
9.5(Observation)	-	500	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	500	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	500	-
17.3 (c)(Current, Torque)	-	500	-
17.3 (f)(Torque)	-	500	-
17.3 (e)(Temperature)	-	500	-
17.3 (b)(Temperature)	-	500	-
17.3 (h)(Voltage)	-	500	-
17.3 (g)(Insulation Resistance)	-	500	-
17.3 (m)(Vibration)	-	500	-
17.3 (j)(Observation)	-	500	-
17.3 (k)(Current)	-	500	-
11(Observation)	-	500	-
17.4 & 9.4.6.1(Observation)	-	500	-
7.2(Dimensions)	-	500	-
9(Observation)	-	500	-
16(Observation)	-	500	-
14(Observation)	-	500	-
9.5(Observation)	-	500	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	500	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	500	-
17.3 (c)(Current, Torque)	-	500	-
17.3 (f)(Torque)	-	500	-
17.3 (e)(Temperature)	-	500	-
17.3 (b)(Temperature)	-	500	-
17.3 (h)(Voltage)	-	500	-
17.3 (g)(Insulation Resistance)	-	500	-
17.3 (m)(Vibration)	-	500	-
17.3 (j)(Observation)	-	500	-
17.3 (k)(Current)	-	500	-
11(Observation)	-	500	-
17.4 & 9.4.6.1(Observation)	-	500	-
7.2(Dimensions)	-	500	-
9(Observation)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
10(Type of enclosures)	-	500	-
11(Methods of cooling)	-	500	-
9.1(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	500	-
4.1(Rated Voltage)	-	500	-
4.2(Rated Frequency)	-	500	-
4.3(Rated Output)	-	500	-
4.4(Rated Speed)	-	500	-
7(Dimensions (Cl.App.F-4))	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
17.3 (a)(No load test at rated voltage and frequency )	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.7(Insulation resistance test)	-	500	-
13.1(High voltage test)	-	500	-
13.2(Moisture proofness)	-	500	-
13.2(Moisture proofness)	-	500	-
13.3(Leakage current test)	-	500	-
12.6(Vibration Severity)	-	500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	500	-
15.1.5(Noise Level)	-	500	-
15.2(Specific Requirements)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
16.1(Marking and Diagram of connenctions)	-	500	-
10(Type of enclosures)	-	500	-
11(Methods of cooling)	-	500	-
9.1(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.11(General construction (as per Cl. 9 & F-3))	-	500	-
9.4.13(General construction (as per Cl. 9 & F-3))	-	500	-
4.1(Rated Voltage)	-	500	-
4.2(Rated Frequency)	-	500	-
4.3(Rated Output)	-	500	-
4.4(Rated Speed)	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
9.5(Earthing)	-	500	-
17.3 (a)(No load test at rated voltage and frequency )	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
17.3 (a)(No load test at rated voltage and frequency)	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	500	-
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	-
12.7(Insulation resistance test)	-	500	-
13.1(High voltage test)	-	500	-
13.2(Moisture proofness)	-	500	-
13.2(Moisture proofness)	-	500	-
13.3(Leakage current test)	-	500	-
12.6(Vibration Severity)	-	500	-
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	500	-
15.1.5(Noise Level)	-	500	-
15.2(Specific Requirements)	-	500	-
14(Terminal marking)	-	500	-
12.1.2(Momentary overload for motors)	-	500	-
16(Observation)	-	500	-
14(Observation)	-	500	-
9.5(Observation)	-	500	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	500	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	500	-
17.3 (c)(Current, Torque)	-	500	-
17.3 (f)(Torque)	-	500	-
17.3 (e)(Temperature)	-	500	-
17.3 (b)(Temperature)	-	500	-
17.3 (h)(Voltage)	-	500	-
17.3 (g)(Insulation Resistance)	-	500	-
17.3 (m)(Vibration)	-	500	-
17.3 (j)(Observation)	-	500	-
17.3 (k)(Current)	-	500	-
11(Observation)	-	500	-
17.4 & 9.4.6.1(Observation)	-	500	-
7.2(Dimensions)	-	500	-
9(Observation)	-	500	-
16(Observation)	-	500	-
14(Observation)	-	500	-
9.5(Observation)	-	500	-
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	500	-
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	500	-
17.3 (c)(Current, Torque)	-	500	-
17.3 (f)(Torque)	-	500	-
17.3 (e)(Temperature)	-	500	-
17.3 (b)(Temperature)	-	500	-
17.3 (h)(Voltage)	-	500	-
17.3 (g)(Insulation Resistance)	-	500	-
17.3 (m)(Vibration)	-	500	-
17.3 (j)(Observation)	-	500	-
17.3 (k)(Current)	-	500	-
11(Observation)	-	500	-
17.4 & 9.4.6.1(Observation)	-	500	-
7.2(Dimensions)	-	500	-
9(Observation)	-	500	-

15 Oct, 2027

-
Included w.e.f.29.09.2025

IS 996 (2025)

SINGLE PHASE ac INDUCTION MOTORS FOR GENERAL PURPOSE (Fouth Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-7(Dimensions)	-	1000	-
Cl-9.1(Mounting)	-	2000	-
Cl-9.2(Terminal Box)	-	2000	-
Cl-9.3(Mounting Constructions)	-	2000	-
Cl-9.3(Mounting Constructions)	-	2000	-
Cl-9.4(Constructional Features)	-	2000	-
Cl-9.5(Earthing)	-	2000	-
Cl-10.1(Enclosures)	-	2000	-
Cl-12.1(Torques)	-	2000	-
Cl-12.1.2(Momentary overload test)	-	2000	-
Cl-12.2(Temperature Rise)	-	2000	-
Cl-12.3(Short Time Rating)	-	2000	-
Cl-12.4(Method of Testing)	-	2000	-
Cl-12.5(Performance Values)	-	2000	-
Cl-12.6(Limits of Vibration Severity)	-	2000	-
Cl-12.7(Insulation Resistance)	-	2000	-
Cl-13.1(High Voltage Values)	-	1500	-
Cl-13.2(Moisture Proofness)	-	1500	-
Cl-13.3(Leakage Current)	-	1500	-
Cl-14(Winding Resistance Measurement)	-	1500	-
Cl-15(REDUCED VOLTAGE RUNNING UP TEST AT NO LOAD)	-	1500	-
Cl-16(NOISE LEVEL)	-	1000	-
Cl-17(OVER SPEED TEST)	-	1000	-
Cl-18(TERMINAL MARKING)	-	1000	-
Cl-12.1.1(Test for torues at rated voltage and frequency)	-	1500	-
Cl-12.1.1(Pull up Torque at rated voltage and frequency)	-	2000	-
Cl-12.1.1(Test for breakaway starting current at rated voltage and frequency)	-	2000	-
Cl-12.1.2(Breakaway (starting) torque at rated voltage and frequency)	-	1500	-
Cl-12.5.1(Test for full-load performance at rated voltage and frequency)	-	1500	-
Cl-21.5(Acceptance Tests)	-	1500	-

15 Oct, 2027

-
Included w.e.f 21.08.2025

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	1000	-
Cl-7(Marking and instructions)	-	1000	-
Cl-8(Protection against access to live parts)	-	2000	-
Cl-10(Power input and current)	-	2000	-
Cl-11(Heating)	-	2000	-
Cl-12(Charging of metal-ion batteries)	-	2000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14(Transient overvoltages)	-	2000	-
Cl-15(Moisture resistance)	-	2000	-
Cl-16(Leakage current and electric strength)	-	2000	-
Cl-17(Overload protection of transformers and associated circuits)	-	2000	-
Cl-18(Endurance)	-	2000	-
Cl-19(Abnormal operation)	-	2000	-
Cl-20(Stability and mechanical hazards)	-	2000	-
Cl-21(Mechanical strength)	-	2000	-
Cl-22(Construction)	-	2000	-
Cl-23(Internal wiring)	-	2000	-
Cl-24(Components)	-	2000	-
Cl-25(Supply connection and external flexible cords)	-	2000	-
Cl-26(Terminals for external conductors)	-	2000	-
Cl-27(Provision for earthing)	-	2000	-
Cl-28(Screws and connections)	-	2000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	2000	-
Cl-30(Resistance to heat and fire)	-	2000	-
Cl-31(Resistance to rusting)	-	2000	-
Cl-32(Radiation, toxicity and similar hazards)	-	2000	-
Cl-4(General requirement)	-	2000	-
Cl-7(Marking and instructions)	-	2000	-
Cl-8(Protection against access to live parts)	-	2000	-
Cl-10(Power input and current)	-	2000	-
Cl-11(Heating)	-	2000	-
Cl-12(Charging of metal-ion batteries)	-	2000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14(Transient overvoltages)	-	2000	-
Cl-15(Moisture resistance)	-	2000	-
Cl-16(Leakage current and electric strength)	-	2000	-
Cl-17(Overload protection of transformers and associated circuits)	-	2000	-
Cl-18(Endurance)	-	2000	-
Cl-19(Abnormal operation)	-	2000	-
Cl-20(Stability and mechanical hazards)	-	2000	-
Cl-21(Mechanical strength)	-	2000	-
Cl-22(Construction)	-	2000	-
Cl-23(Internal wiring)	-	2000	-
Cl-24(Components)	-	2000	-
Cl-25(Supply connection and external flexible cords)	-	2000	-
Cl-26(Terminals for external conductors)	-	2000	-
Cl-27(Provision for earthing)	-	2000	-
Cl-28(Screws and connections)	-	2000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	2000	-
Cl-30(Resistance to heat and fire)	-	2000	-
Cl-31(Resistance to rusting)	-	2000	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-
Cl-4(General requirement)	-	500	-
Cl-7(Marking and instructions)	-	1000	-
Cl-8(Protection against access to live parts)	-	1500	-
Cl-10(Power input and current)	-	2000	-
Cl-11(Heating)	-	2000	-
Cl-12(Charging of metal-ion batteries)	-	2000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14(Transient overvoltages)	-	2000	-
Cl-15(Moisture resistance)	-	2000	-
Cl-16(Leakage current and electric strength)	-	2000	-
Cl-17(Overload protection of transformers and associated circuits)	-	2000	-
Cl-18(Endurance)	-	2000	-
Cl-19(Abnormal operation)	-	2000	-
Cl-20(Stability and mechanical hazards)	-	2000	-
Cl-21(Mechanical strength)	-	2000	-
Cl-22(Construction)	-	2000	-
Cl-23(Internal wiring)	-	2000	-
Cl-24(Components)	-	2000	-
Cl-25(Supply connection and external flexible cords)	-	2000	-
Cl-26(Terminals for external conductors)	-	2000	-
Cl-27(Provision for earthing)	-	2000	-
Cl-28(Screws and connections)	-	2000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	2000	-
Cl-30(Resistance to heat and fire)	-	2000	-
Cl-31(Resistance to rusting)	-	2000	-
Cl-19.11.4.1(Electrostatic discharges)	-	3000	-
Cl-19.11.4.3(Fast transient bursts)	-	3000	-
Cl-19.11.4.4(Surge immunity test)	-	3000	-
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	3000	-
Cl-19.11.4.7(Harmonics)	-	3000	-
Cl-4(General requirement)	-	500	-
Cl-7(Marking and instructions)	-	500	-
Cl-8(Protection against access to live parts)	-	2000	-
Cl-10(Power input and current)	-	2500	-
Cl-11(Heating)	-	3000	-
Cl-12(Charging of metal-ion batteries)	-	3000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14(Transient overvoltages)	-	2000	-
Cl-15(Moisture resistance)	-	2500	-
Cl-16(Leakage current and electric strength)	-	2500	-
Cl-17(Overload protection of transformers and associated circuits)	-	2000	-
Cl-18(Endurance)	-	2000	-
Cl-19(Abnormal operation)	-	2000	-
Cl-20(Stability and mechanical hazards)	-	2000	-
Cl-21(Mechanical strength)	-	2000	-
Cl-22(Construction)	-	2000	-
Cl-23(Internal wiring)	-	1500	-
Cl-25(Supply connection and external flexible cords)	-	1500	-
Cl-26(Terminals for external conductors)	-	1500	-
Cl-27(Provision for earthing)	-	2000	-
Cl-28(Screws and connections)	-	2000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	2000	-
Cl-30(Resistance to heat and fire)	-	2000	-
Cl-31(Resistance to rusting)	-	2000	-
Cl-19.11.4.1(Electrostatic discharges)	-	2000	-
Cl-19.11.4.3(Fast transient bursts)	-	2000	-
Cl-19.11.4.4(Surge immunity test)	-	2000	-
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	2000	-
Cl-19.11.4.7(Harmonics)	-	2000	-

15 Oct, 2027

-
Included w.e.f. 11.11.2025 Exclusion: "24 (Components) 19.11.4.2 (Radiated fields) 19.11.4.5 (Immunity to conducted discharges) 32 (Radiation, Toxicity and similar Hazard IS 302-1)"

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	500	-
6(Classification- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	500	-
7.101(Marking)	-	500	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.3(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation)	-	1000	-
19.9(Abnormal Operation)	-	1000	-
19.1(Abnormal Operation)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.101(Mechanical Strength, IS 302-2-3)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.106(Construction)	-	1000	-
22.107(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.4(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-
4(General requirement)	-	500	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
19(Abnormal operation)	-	1000	-
25(Supply Connection and External Flexible Cords)	-	1000	-
6(Classification- IS 302-1 )	-	1000	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.7(Marking- IS 302-1)	-	1000	-
7.8(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.101(Marking)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.3(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation)	-	1000	-
19.9(Abnormal Operation)	-	1000	-
19.1(Abnormal Operation)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.101(Mechanical Strength, IS 302-2-3)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.106(Construction)	-	1000	-
22.107(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.4(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-
4(General requirement)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
19(Abnormal operation)	-	1000	-
25(Supply Connection and External Flexible Cords)	-	1000	-
6(Classification- IS 302-1 )	-	1000	-
6(Classification- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.1(Marking- IS 302-1)	-	1000	-
7.3(Marking- IS 302-1)	-	1000	-
7.4(Marking- IS 302-1)	-	1000	-
7.6(Marking- IS 302-1)	-	1000	-
7.7(Marking- IS 302-1)	-	1000	-
7.8(Marking- IS 302-1)	-	1000	-
7.11(Marking- IS 302-1)	-	1000	-
7.12(Marking- IS 302-1)	-	1000	-
7.13(Marking- IS 302-1)	-	1000	-
7.14(Marking- IS 302-1)	-	1000	-
7.15(Marking- IS 302-1)	-	1000	-
7.101(Marking)	-	1000	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.3(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation)	-	1000	-
19.9(Abnormal Operation)	-	1000	-
19.1(Abnormal Operation)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.101(Mechanical Strength, IS 302-2-3)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.106(Construction)	-	1000	-
22.107(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.4(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	1000	-
4(General requirement)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	1000	-
19(Abnormal operation)	-	1000	-
25(Supply Connection and External Flexible Cords)	-	1000	-
6(Classification- IS 302-1 )	-	500	-
6(Classification- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	500	-
7.101(Marking)	-	500	-
8( Protection Against Electric Shock, IS 302-1)	-	1000	-
10(Power Input and Current, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
11(Heating, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15.3(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.4(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.5(Abnormal Operation, IS 302-1)	-	1000	-
19.7(Abnormal Operation)	-	1000	-
19.9(Abnormal Operation)	-	1000	-
19.1(Abnormal Operation)	-	1000	-
19.101(Abnormal Operation)	-	1000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	1000	-
21.2(Mechanical Strength, IS 302-1)	-	1000	-
21.101(Mechanical Strength, IS 302-2-3)	-	1000	-
22(Construction, IS 302-1)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
22.104(Construction)	-	1000	-
22.105(Construction)	-	1000	-
22.106(Construction)	-	1000	-
22.107(Construction)	-	1000	-
23.1(Internal Wiring, IS 302-1)	-	1000	-
23.2(Internal Wiring, IS 302-1)	-	1000	-
23.3(Internal Wiring, IS 302-1)	-	1000	-
23.4(Internal Wiring, IS 302-1)	-	1000	-
23.5(Internal Wiring, IS 302-1)	-	1000	-
23.6(Internal Wiring, IS 302-1)	-	1000	-
23.7(Internal Wiring, IS 302-1)	-	1000	-
23.8(Internal Wiring, IS 302-1)	-	1000	-
23.9(Internal Wiring, IS 302-1)	-	1000	-
23.10(Internal Wiring, IS 302-1)	-	1000	-
24.1(Components, IS 302-1)	-	1000	-
24.2(Components, IS 302-1)	-	1000	-
24.4(Components, IS 302-1)	-	1000	-
24.5(Components, IS 302-1)	-	1000	-
24.6(Components, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27.1(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
4(General requirement)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
19(Abnormal operation)	-	1000	-
25(Supply Connection and External Flexible Cords)	-	1000	-
6(Classification- IS 302-1 )	-	-	-
6(Classification- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.1(Marking- IS 302-1)	-	-	-
7.3(Marking- IS 302-1)	-	-	-
7.4(Marking- IS 302-1)	-	-	-
7.6(Marking- IS 302-1)	-	-	-
7.7(Marking- IS 302-1)	-	-	-
7.8(Marking- IS 302-1)	-	-	-
7.11(Marking- IS 302-1)	-	-	-
7.12(Marking- IS 302-1)	-	-	-
7.13(Marking- IS 302-1)	-	-	-
7.14(Marking- IS 302-1)	-	-	-
7.15(Marking- IS 302-1)	-	-	-
7.101(Marking)	-	-	-
8( Protection Against Electric Shock, IS 302-1)	-	-	-
10(Power Input and Current, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
11(Heating, IS 302-1)	-	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-	-
14(Transient Over Voltages, IS 302-1)	-	-	-
15.1(Moisture Resistance, IS 302-1)	-	-	-
15.2(Moisture Resistance, IS 302-1)	-	-	-
15.3(Moisture Resistance, IS 302-1)	-	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	-	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	-	-
19.4(Abnormal Operation, IS 302-1)	-	-	-
19.4(Abnormal Operation, IS 302-1)	-	-	-
19.5(Abnormal Operation, IS 302-1)	-	-	-
19.5(Abnormal Operation, IS 302-1)	-	-	-
19.7(Abnormal Operation)	-	-	-
19.9(Abnormal Operation)	-	-	-
19.1(Abnormal Operation)	-	-	-
19.101(Abnormal Operation)	-	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-	-
21.1(Mechanical Strength, IS 302-1)	-	-	-
21.2(Mechanical Strength, IS 302-1)	-	-	-
21.101(Mechanical Strength, IS 302-2-3)	-	-	-
22(Construction, IS 302-1)	-	-	-
22.101(Construction)	-	-	-
22.102(Construction)	-	-	-
22.103(Construction)	-	-	-
22.104(Construction)	-	-	-
22.105(Construction)	-	-	-
22.106(Construction)	-	-	-
22.107(Construction)	-	-	-
23.1(Internal Wiring, IS 302-1)	-	-	-
23.2(Internal Wiring, IS 302-1)	-	-	-
23.3(Internal Wiring, IS 302-1)	-	-	-
23.4(Internal Wiring, IS 302-1)	-	-	-
23.5(Internal Wiring, IS 302-1)	-	-	-
23.6(Internal Wiring, IS 302-1)	-	-	-
23.7(Internal Wiring, IS 302-1)	-	-	-
23.8(Internal Wiring, IS 302-1)	-	-	-
23.9(Internal Wiring, IS 302-1)	-	-	-
23.10(Internal Wiring, IS 302-1)	-	-	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26(Terminals for External Conductors, IS 302-1)	-	-	-
27.1(Provision for Earthing, IS 302-1)	-	-	-
27.2(Provision for Earthing, IS 302-1)	-	-	-
27.3(Provision for Earthing, IS 302-1)	-	-	-
27.4(Provision for Earthing, IS 302-1)	-	-	-
27.5(Provision for Earthing, IS 302-1)	-	-	-
28(Screws & Connections, IS 302-1)	-	-	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	-	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	-	-
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	-	-
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	-	-
31(Resistance of Rusting, IS 302-1)	-	-	-
4(General requirement)	-	-	-
16(Leakage current and electric strength)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
18(Endurance)	-	-	-
19.11.4.1(Electrostatic discharges)	-	-	-
19.11.4.3(Fast transient bursts)	-	-	-
19.11.4.4(Surge immunity test)	-	-	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	-	-
19.11.4.7(Harmonics)	-	-	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	-	-
19(Abnormal operation)	-	-	-
25(Supply Connection and External Flexible Cords)	-	-	-

15 Oct, 2027

-
Included w.e.f. 11.11.2025 Exclusion: "24.1 (Components, IS 302-1) 19.11.4.2 (Radiated fields) 19.11.4.5 (Immunity to conducted discharges) 32 (Radiation, Toxicity and similar Hazard IS 302-1)"

IS 1475 (2024)

Drinking Water Coolers - Specification (Fourth Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Classification)	-	5000	-
5(Construction)	-	7000	-
6.3(Cooling Capacity Test)	-	10000	-
6.4(Maximum Operating Condition Test)	-	7000	-
6.5(Pull Down Test)	-	5000	-
9(Maximum Power Consumption Test)	-	7000	-
10(Annual Energy Consumption Test)	-	10000	-
11(Storage Capacity Test)	-	10000	-
13(Functional Test)	-	5000	-
14 a)(Protection against electric shock)	-	5000	-
14 b)(High voltage (electric strength) test)	-	5000	-
14 c)(Leakage current tests)	-	5000	-
14 d)(Provision for earthing)	-	5000	-

15 Oct, 2027

-
Included w.e.f 11.08.2025

IS 3315 (2024)

Direct Evaporative Air Cooler â Specification (Fourth Revision)

70000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Enclosure)	-	6000	-
Cl-5.2(Filter Pads)	-	6000	-
Cl-5.3(Sump Tank Capacities)	-	6000	-
Cl-5.4(Blower/Fan)	-	6000	-
Cl-5.4.3(Fan motor)	-	6000	-
Cl-5.5(Pump Set)	-	6000	-
Cl-5.6.1(Electrical wiring and connection)	-	6000	-
Cl-5.6.2(Suitable power cable)	-	6000	-
Cl-5.7(Switches)	-	6000	-
Cl-6(Rating Requirement)	-	6000	-
Cl-8.1(Performance Requirement)	-	6000	-
Cl-8.2(Sound Test)	-	6000	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	6000	-
Cl-8.4(Cooling Efficiency Test)	-	6000	-
Cl-8.5(Power Consumption)	-	6000	-
Cl-8.6(EER Calculation Method)	-	6000	-
Cl-8.7(Drop Test)	-	6000	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	6000	-
Cl-12.2.1(General Running Tests)	-	6000	-
Cl-12.2.2(Protection against Electric Shock)	-	6000	-
Cl-12.2.3(High Voltage Tests)	-	6000	-
Cl-12.2.4(Leakage Current)	-	6000	-
Cl-12.2.5(Provision for Earthing)	-	6000	-
Cl-12.2.6(Finish)	-	6000	-
Cl-13(Additional Requirement for ECO-Mark)	-	6000	-
Cl-14(Storage)	-	6000	-

15 Oct, 2027

-
Included w.e.f 21.08.2025

IS 17550 : Part 3 (2025)

Household Refrigerating Appliances - Characteristics and Methods Of Test Part 3 Energy Consumption and Volume (First Revision)

145000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.1, Annex A(set up for energy consumption)	-	15000	-
Clause 4.2, Annex B(Steady state power consumption)	-	15000	-
Clause 4.3, Annex C(Defrost and Recovery Energy and Temperature Change)	-	15000	-
Clause 4.4, Annex D(Defrost Frequency)	-	15000	-
Clause 4.5, Annex E(Number of Test Points and Interpolation)	-	15000	-
Clause 4.6, Annex G(Load Processing Efficiency)	-	15000	-
Clause 4.7, Annex F(Specified Auxiliaries)	-	15000	-
Clause 4.8, Annex H(Volume determination)	-	15000	-
Clause 4.8.1, Annex H(Rated total volume)	-	15000	-
Clause 5, 5.1, 5.2 Table 1(TARGET TEMPERATURES FOR ENERGY DETERMINATION)	-	15000	-
Clause 6, 6.1 to 6.8(DETERMINATION OF ENERGY CONSUMPTION)	-	15000	-
Clause 4.1, Annex A(set up for energy consumption)	-	15000	-
Clause 4.2, Annex B(Steady state power consumption)	-	15000	-
Clause 4.3, Annex C(Defrost and Recovery Energy and Temperature Change)	-	15000	-
Clause 4.4, Annex D(Defrost Frequency)	-	15000	-
Clause 4.5, Annex E(Number of Test Points and Interpolation)	-	15000	-
Clause 4.6, Annex G(Load Processing Efficiency)	-	15000	-
Clause 4.7, Annex F(Specified Auxiliaries)	-	15000	-
Clause 4.8, Annex H(Volume determination)	-	15000	-
Clause 4.8.1, Annex H(Rated total volume)	-	15000	-
Clause 5, 5.1, 5.2 Table 1(TARGET TEMPERATURES FOR ENERGY DETERMINATION)	-	15000	-
Clause 6, 6.1 to 6.8(DETERMINATION OF ENERGY CONSUMPTION)	-	15000	-

15 Oct, 2027

-
Included w.e.f 04.09.2025

IS 17550 : Part 2 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 2 Performance Requirements (First Revision)

315000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Storage Test)	-	20000	-
7(Cooling Capacity Test)	-	20000	-
8(Freezing Capacity Test)	-	20000	-
9("Automatic Ice-Making Capacity Test")	-	20000	-
Cl. No.4.6 & Annex A(PULL-DOWN TEST)	-	20000	-
Cl. No.4.6(b) & Annex B("Wine Storage Appliances And Compartments; Storage Test")	-	20000	-
Cl. No.4.6(C) & AnnexC("Temperature Rise Test ")	-	20000	-
Cl. No.4.6(d) & Annex D("Water Vapour Condensation Test ")	-	20000	-

15 Oct, 2027

-
Included w.e.f 19.12.2025

IS 17550 : Part 1 (2024)

Household Refrigerating Appliances - Characteristics and Test Methods Part 1 General Requirements (First Revision)

205000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(MARKING)	-	15000	-
8(MATERIALS, DESIGN, AND MANUFACTURE)	-	15000	-
9(Testing The Air Tightness Of Door Or Lid Seal(S))	-	15000	-
10(Testing The Opening Force Of Door(S) Or Lid(S))	-	15000	-
11(Testing The Durability Of Hinges And Handles Of Door(S) And Lid(S)	-	15000	-
12(Testing The Mechanical Strength Of Shelves And Similar Components)	-	15000	-
14(Ice-Making Test (If Applicable))	-	15000	-
15(Test For Absence Of Odour And Taste)	-	20000	-
16(Safety Requirements)	-	20000	-

15 Oct, 2027

-
Included w.e.f 19.12.2025

IS 18112 (2025)

DIGITAL TELEVISION RECEIVER FOR SATELLITE BROADCAST TRANSMISSION SPECIFICATION (First Revision)

125000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	7000	-
Clause 4.3(Specifications)	-	7000	-
Clause 4.5(Safety Requirements)	-	7000	-
Clause 5(Marking)	-	7000	-
Clause 6(Operating Life Test)	-	7000	-
Clause 4.1, Table-1, i) a)(Hardware specification)	-	7000	-
Clause 4.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	7000	-
Clause 4.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	7000	-
Clause 4.1, Table-1, i) d)(Decompression and decoding of audio)	-	7000	-
Clause 4.1, Table-1, i) e)(Active Format descriptors)	-	7000	-
Clause 4.1, Table-1, i) f)(Captioning and Sub-titling)	-	7000	-
Clause 4.1, Table-1, i) g)(Teletext)	-	7000	-
Clause 4.1, Table-1, i) h)(Multi-language support)	-	7000	-
Clause 4.1, Table-1, i) j)(DTV receiver mixed Audio Description)	-	7000	-
Clause 4.1, Table-1, i) k)(Broadcast mixed audio description)	-	7000	-
Clause 4.1, Table-1, i) m)(Service demultiplexing)	-	7000	-
Clause 4.1, Table-1, i) n)(Data services)	-	7000	-
Clause 4.1, Table-1, i) p)(OSD)	-	7000	-
Clause 4.1, Table-1, i) q)(DTV character set)	-	7000	-
Clause 4.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	7000	-
Clause 4.1, Table-1, i) s)(Time)	-	7000	-
Clause 4.1, Table-1, i) t)(Digital TV output)	-	7000	-
Clause 4.4, Table-2, i) b)(Frequency)	-	7000	-
Clause 4.4, Table-2, i) a)(Input voltage range)	-	7000	-
Clause 4.1,Table-1, ii) a)(Demodulation and FEC decoding)	-	7000	-
Clause 4.1, Table-1, ii) b)(DTV Receiver Installation)	-	7000	-
Clause 4.1, Table-1, ii) c)(Network evolution)	-	7000	-
Clause 4.4, Table-2, iii) c)(RF input impedance)	-	7000	-
Clause 4.1, Table-1, ii) d)(Services available)	-	7000	-
Clause 4.1, Table-1, ii) e)(Selection via Service List)	-	7000	-
Clause 4.1, Table-1, ii) f)(Selection via Numeric Entry)	-	7000	-
Clause 4.1, Table-1, ii) g)(Favourite Channel list)	-	7000	-
Clause 4.1, Table-1, ii) h)(Hidden Services)	-	7000	-
Clause 4.4, Table-2, iii) b)(Input frequency range)	-	7000	-
Clause 4.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	7000	-
Clause 4.1, Table-1, ii) k)(RF input signal)	-	7000	-
Clause 4.1, Table-1, ii) m)(LNB supply current)	-	7000	-
Clause 4.1, Table-1, ii) n)(LNB supply voltage)	-	7000	-
Clause 4.1, Table-1, ii) p)(LNB Control)	-	7000	-
Clause 4.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	7000	-
Clause 4.4, Table-2, iii) a)(Input level per carrier)	-	7000	-
Clause 4.4, Table-2, iv) c)(RF input impedance)	-	7000	-
Clause 4.4, Table-2, iv) b)(Input frequency range)	-	7000	-
Clause 4.4, Table-2, iv) a)(Input level per carrier)	-	7000	-
Clause 4.4, Table-2, v)(Symbol rate)	-	7000	-
Clause 4.4, Table-2, vi)(RF input return loss)	-	7000	-
Clause 4.4, Table-2, vii)(DisEqC)	-	7000	-
Clause 4.4, Table-2, viii)(Operating ambient temperature range)	-	7000	-
Clause 4.4, Table-2, ix)(Operating humidity range)	-	7000	-
Clause 4.1, Table-1, iii) a)(Interfaces, Connectors)	-	7000	-
Clause 4.1, Table-1, iv)(Automatic software upgrade mechanism)	-	7000	-
Clause 4.1, Table-1, v) a)(Remote Control)	-	7000	-
Clause 4.1, Table-1, v) b)(Easy to use and simple documentation)	-	7000	-
Clause 3.1, Table-1, v) c)(Support package)	-	7000	-

15 Oct, 2027

-
Included w.e.f.05.08.2025 Exclsuion Clause 4.6 (Electromagnetic Compatibility (EMC) Requirements)

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(General- materials, components)	-	8000	-
Cl-4.2(Energy source classifications)	-	8000	-
Cl-4.3(Protection against energy sources)	-	8000	-
Cl-4.4(Safeguards)	-	8000	-
Cl-4.5(Explosion)	-	8000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	8000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	8000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	8000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	8000	-
Cl-4.10(Components requirements)	-	8000	-
Cl-5.1(General- Electrically-caused injury)	-	8000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	8000	-
Cl-5.3(Protection against electrical energy sources)	-	8000	-
Cl-5.4(Insulation materials and requirements)	-	8000	-
Cl-5.5(Components as safeguards)	-	8000	-
Cl-5.6(Protective conductor)	-	8000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	8000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	8000	-
Cl-6.1(General- Electrically-caused fire)	-	8000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	8000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	8000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	8000	-
Cl-6.5(Internal and external wiring)	-	8000	-
Cl-7.1(General- Injury caused by hazardous substances)	-	8000	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	8000	-
Cl-7.3(Ozone exposure)	-	8000	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	8000	-
Cl-7.5(Use of instructional safeguards and instructions)	-	8000	-
Cl-8.1(General- Mechanically-caused injury)	-	8000	-
Cl-8.2(Mechanical energy source classifications)	-	8000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	8000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	8000	-
Cl-8.5(Safeguards against moving parts)	-	8000	-
Cl-8.6(Stability of equipment)	-	8000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	8000	-
Cl-8.8(Handle strength)	-	8000	-
Cl-8.9(Wheels or casters attachment requirements)	-	8000	-
Cl-8.10(Carts, stands, and similar carriers)	-	8000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	8000	-
Cl-9.1(General-Thermal burn injury)	-	8000	-
Cl-9.2(Thermal energy source classifications)	-	8000	-
Cl-9.3(Touch temperature limits)	-	8000	-
Cl-9.4(Safeguards against thermal energy sources)	-	8000	-
Cl-9.5(Requirements for safeguards)	-	8000	-
Cl-9.6(Requirements for wireless power transmitters)	-	8000	-
Annex A(Examples of equipment within the scope of this document)	-	8000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	8000	-
Annex B-2(Normal operating conditions)	-	8000	-
Annex B-3(Simulated abnormal operating conditions)	-	8000	-
Annex B-4(Simulated single fault conditions)	-	8000	-
Annex D-1(Impulse test generators)	-	8000	-
Annex D-2(Antenna interface test generator)	-	8000	-
Annex D-3(Electronic pulse generator)	-	8000	-
Annex E-1(Electrical energy source classification for audio signals)	-	8000	-
Annex E-2(Audio signals used during test)	-	8000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	8000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	8000	-
Annex F-2(Letter symbols and graphical symbols)	-	8000	-
Annex F-3(Equipment markings)	-	8000	-
Annex F-4(Instructions)	-	8000	-
Annex F-5(Instructional safeguards)	-	8000	-
Annex G-1(Switches)	-	8000	-
Annex G-2(Relays)	-	8000	-
Annex G-3(Protective devices)	-	8000	-
Annex G-4(Connectors)	-	8000	-
Annex G-5(Wound components)	-	8000	-
Annex G-6(Wire insulation)	-	8000	-
Annex G-7(Mains power supply cords and interconnection cables)	-	8000	-
Annex G-8(Varistors)	-	8000	-
Annex G-9(Integrated circuit (IC) current limiters)	-	8000	-
Annex G-10(Resistors)	-	8000	-
Annex G-11(Capacitors and RC units)	-	8000	-
Annex G-12(Optocouplers)	-	8000	-
Annex G-13(Printed boards)	-	8000	-
Annex G-14(Coatings on component terminals)	-	8000	-
Annex H-1(General- Criteria for telephone ringing signals)	-	8000	-
Annex H-2(Method A)	-	8000	-
Annex H-3(Method B)	-	8000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	8000	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	8000	-
Annex J-2(Type tests)	-	8000	-
Annex J-3(Testing during manufacturing)	-	8000	-
Annex K-1(General- Safety interlocks)	-	8000	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	8000	-
Annex K-3(Inadvertent change of operating mode)	-	8000	-
Annex K-4(Interlock safeguard override)	-	8000	-
Annex K-5(Fail-safe)	-	8000	-
Annex K-6(Mechanically operated safety interlocks)	-	8000	-
Annex K-7(Interlock circuit isolation)	-	8000	-
Annex L-1(General requirements)	-	8000	-
Annex L-2(Permanently connected equipment)	-	8000	-
Annex L-3()	-	8000	-
Annex L-4(Single-phase equipment)	-	8000	-
Annex L-5(Three-phase equipment)	-	8000	-
Annex L-6(Switches as disconnect devices)	-	8000	-
Annex L-7(Plugs as disconnect devices)	-	8000	-
Annex L-8(Multiple power sources)	-	8000	-
Annex L-9(Compliance criteria)	-	8000	-
Annex M-1(General requirements)	-	8000	-
Annex M-2(Safety of batteries and their cells)	-	8000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	8000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	8000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	8000	-
Annex M-6(Safeguards against short-circuits)	-	8000	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	8000	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	8000	-
Annex M-9(Preventing electrolyte spillage)	-	8000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	8000	-
Annex N(Electrochemical potentials (V))	-	8000	-
Annex O(Measurement of creepage distances and clearances)	-	8000	-
Annex P-1(General-Safeguards against conductive objects)	-	8000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	8000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	8000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	8000	-
Annex Q-1(Limited power source)	-	8000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	8000	-
Annex R(Limited short-circuit test)	-	8000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	8000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	8000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	8000	-
Annex S-4(Flammability classification of materials)	-	8000	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	8000	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	8000	-
Annex T-1(General-Mechanical strength tests)	-	8000	-
Annex T-2(Steady force test, 10 N)	-	8000	-
Annex T-3(Steady force test, 30 N)	-	8000	-
Annex T-4(Steady force test, 100 N)	-	8000	-
Annex T-5(Steady force test, 250 N)	-	8000	-
Annex T-6(Enclosure impact test)	-	8000	-
Annex T-7(Drop test)	-	8000	-
Annex T-8(Stress relief test)	-	8000	-
Annex T-9(Glass impact test)	-	8000	-
Annex T-10(Glass fragmentation test)	-	8000	-
Annex T-11(Test for telescoping or rod antennas)	-	8000	-
Annex V-1(Accessible parts of equipment)	-	8000	-
Annex V-2(Accessible part criterion)	-	8000	-
Annex W(Comparison of terms introduced in this document)	-	8000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	8000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	8000	-
Annex Y-2(Resistance to UV radiation)	-	8000	-
Annex Y-3(Resistance to corrosion)	-	8000	-
Annex Y-4(Gaskets)	-	8000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	8000	-
Annex Y-6(Mechanical strength of enclosures)	-	8000	-

15 Oct, 2027

-
Included w.e.f 12.11.2025 Exclusion: Cl-10.1 (General-Radiation), Cl-10.2 (Radiation energy source classifications), Cl-10.3 (Safeguards against laser radiation),Cl-10.4 ("Safeguards against optical radiation from lamps and lamp systems (including LED types)"),Cl-10.5 (Safeguards against X-radiation), Cl-10.6 (Safeguards against acoustic energy sources), Annex C-1 (Protection of materials in equipment from UV radiation), , Annex C-2 (UV light conditioning test), Annex G-15 (Pressurized liquid filled components or LFC assemblies), Annex G-16 (IC that includes a capacitor discharge function (ICX)), Annex U ("Mechanical strength of CRTs and protection against the effects of implosion")

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	500	-
Cl.6 (Classification)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7(Marking and Instructions)	-	500	-
Cl.7(Marking and Instructions)	-	500	-
Cl.7(Marking and Instructions)	-	500	-
Cl.7.3(Marking and Instructions)	-	500	-
Cl.7.3(Marking and Instructions)	-	500	-
Cl.7.3(Marking and Instructions)	-	500	-
Cl.7.4(Marking and Instructions)	-	500	-
Cl.7.5(Marking and Instructions)	-	500	-
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	500	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	500	-
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	500	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	500	-
Cl.7.12.1 & IS:302-1:2009(Marking and Instructions)	-	500	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	500	-
Cl.7.14(Marking and Instructions)	-	500	-
Cl.7.14(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	500	-
Cl.7.101(Marking and Instructions)	-	500	-
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	2000	-
Cl.10 & IS:302-1:2008(Power Input and Current)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11 & IS:302-1:2008(Heating)	-	2000	-
Cl.11.8(Heating)	-	2000	-
Cl.11.8(Heating)	-	2000	-
Cl.11.8(Heating)	-	2000	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	2200	-
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	2200	-
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	1500	-
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	2500	-
Cl.15.3 of IS 302-1:200(Moisture Resistance )	-	2500	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	2200	-
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	2200	-
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	2000	-
Cl.18 (Endurance. )	-	2000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19.101(Abnormal Operation.)	-	2000	-
Cl.19.102(Abnormal Operation.)	-	2000	-
Cl.19.103(Abnormal Operation.)	-	2000	-
Cl.19.104(Abnormal Operation.)	-	2000	-
Cl.19.105(Abnormal Operation.)	-	2000	-
Cl.19.106(Abnormal Operation.)	-	2000	-
Table 8 of IS 302-1:2008(Abnormal Operation.)	-	2000	-
Cl.19.107(Abnormal Operation.)	-	2000	-
Cl.19.108(Abnormal Operation.)	-	2000	-
Cl.19.109(Abnormal Operation.)	-	2000	-
Cl.19.110(Abnormal Operation.)	-	2000	-
Cl.19.111(Abnormal Operation.)	-	2000	-
Cl.19.112(Abnormal Operation.)	-	2000	-
Cl.19.113(Abnormal Operation.)	-	2000	-
Cl.19.114(Abnormal Operation.)	-	2000	-
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	1500	-
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	1500	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	1500	-
Cl.21.101 (Mechanical Strength.)	-	1500	-
Cl.21.102(Mechanical Strength.)	-	1500	-
Cl.21.103(Mechanical Strength.)	-	1500	-
Cl.22.1 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.5 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.6 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.7 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.8 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.9 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.11(Construction)	-	2000	-
Cl.22.12 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.13 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.14 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.15 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.18 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.20 of IS 302-1:2008(Construction)	-	2000	-
Cl.22.21 of IS 302-1:2008(Construction)	-	2000	-
Cl.23 & IS:302-1:2008(Internal Wiring )	-	1500	-
Cl.23.4 & Cl.29 of 302-1:2008(Internal Wiring )	-	1500	-
Cl.23.5 of 302-1:2008(Internal Wiring )	-	1500	-
Cl.23.7 of 302-1:2008(Internal Wiring )	-	1500	-
C.23.7 of 302-1:2008(Internal Wiring )	-	1500	-
Cl.24.1 of 302-1:2008(Component)	-	1000	-
Cl.24.1 of 302-1:2008(Component)	-	1000	-
Cl.24.1.3 (Component)	-	1000	-
Cl.24.1.3 (Component)	-	1000	-
Cl.24.1.3 (Component)	-	1000	-
Cl.24.1.3 (Component)	-	1000	-
C.24.1.4(Component)	-	1000	-
C.24.2 of 302-1:2008(Component)	-	1000	-
Cl.24.10(Component)	-	1000	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.7.(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.8(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.9(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.11(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.12(Supply Connection and External Flexible Cords )	-	1000	-
Cl. 25.13(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.18(Supply Connection and External Flexible Cords )	-	1000	-
Cl.25.20(Supply Connection and External Flexible Cords )	-	1000	-
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	1000	-
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	1500	-
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	1500	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	1000	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	1500	-
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	1500	-
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	1500	-
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	1500	-
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	1500	-
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	1500	-
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	1500	-
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	1500	-
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	1500	-
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	1500	-
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	1500	-
Cl.28 of 302-1:2008(Screws and Connections.)	-	1500	-
Cl.27.5 of 302-1:2008(Provision for Earthing : ECR)	-	1500	-
Cl.27.1 of 302-1:2008(Provision for Earthing )	-	1500	-
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	1500	-
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	1500	-
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	1500	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	1500	-
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	1500	-
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	1500	-
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	1500	-
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	1500	-
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	1500	-
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	1500	-
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	1500	-
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords : Type of attachments )	-	1500	-
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords : Means of connection )	-	1500	-
Cl.24 of IS:302-2-30:2007(Component)	-	1000	-
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	1000	-
Cl.23 of IS:302-1:2008(Internal Wiring )	-	1000	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	2000	-
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	2000	-
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	2000	-
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	2000	-
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	2000	-
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	2000	-
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	2000	-
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	2000	-
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	2000	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	2000	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	2000	-
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	2000.42	-
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	1500	-
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	1500	-
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	1500	-
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	1500	-
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	1500	-
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	1500	-
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	1500	-
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	1500	-
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	1500	-
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	1500	-
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	1500	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	1500	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	1500	-
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	1500	-
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	1500	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	1500	-
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	1500	-
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	1500	-
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	1500	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	1500	-
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	1500	-
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	1500	-
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	1500	-
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	1500	-
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	1500	-
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	1500	-
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	1500	-
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	1500	-
Cl.10 of IS:302-1:2008(Power Input and Current)	-	1000	-
Cl.8 of IS:302-1:2008(Protection Against Access to Live Parts)	-	1000	-
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	500	-
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	500	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	500	-
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	500	-
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	500	-
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	500	-
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	500	-
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	500	-
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	500	-
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	500	-
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	500	-
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	500	-
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	500	-
19.11.4.1(Electrostatic discharges)	-	2500	-
19.11.4.3(Fast transient bursts)	-	2500	-
19.11.4.4(Surge immunity test)	-	2500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	2500	-
19.11.4.7(Harmonics)	-	2500	-

15 Oct, 2027

-
Included w.e.f 11.07.2025 Exclusion: Cl 19.11.4.2(Radiated fields), Cl 19.11.4.5(Injected Current)

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	5000	-
Cl-5(General Conditions for the tests)	-	5000	-
Cl-6(Classification)	-	5000	-
Cl-7(Marking)	-	5000	-
Cl-8(Safety Requirements)	-	5000	-
Cl-9(Endurance fpr motor and base assembly)	-	5000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	5000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	5000	-
Cl-10.4(Idli Batter)	-	5000	-
Cl-10.5(Operational Tests for Juicers)	-	5000	-
Cl-11(Temperature Withstand Test for Bowl)	-	5000	-
Cl-12.1(Test for Switches)	-	5000	-
Cl-13(Strength of Assembly)	-	5000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	5000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	5000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	5000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	5000	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	5000	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	5000	-
Cl-19.11.4.1(Electrostatic discharges)	-	5000	-
Cl-19.11.4.3(Fast transient bursts)	-	5000	-
Cl-19.11.4.4(Surge immunity test)	-	5000	-
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	5000	-
Cl-19.11.4.7(Harmonics)	-	5000	-

15 Oct, 2027

-
Included w.e.f 30.04.2025 Exclusion: Cl-19.11.4.2 (Radiated fields),Cl-19.11.4.5 (Immunity to conducted discharges)

IS 302 : Part 2 : Sec 74 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 74 Portable immersion heaters

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	5000	-
8(Protection against access to live parts)	-	5000	-
10(Power input and current)	-	5000	-
10(Power input and current)	-	5000	-
11(Heating)	-	5000	-
13.1 &13.2(Leakage current test)	-	5000	-
13.1 &13.3(Electric strength test)	-	5000	-
14(Transient overvoltages)	-	5000	-
15(Moisture resistance)	-	5000	-
15.3(Moisture resistance)	-	5000	-
16.1 &16.2(Leakage current test)	-	5000	-
16.1 & 16.3(Electric strength test)	-	5000	-
17(Overload protection of transformers and associated circuits)	-	5000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	5000	-
20.1(Stability and mechanical hazards)	-	5000	-
20.2(Stability and mechanical hazards)	-	5000	-
21(Mechanical strength)	-	5000	-
22(Construction)	-	5000	-
23(Internal wiring)	-	5000	-
24(Components)	-	5000	-
24.101(Components)	-	5000	-
25("Supply connection and external flexible cords")	-	5000	-
26("Terminals for external conductors")	-	5000	-
27(Provision for earthing)	-	5000	-
28(Screws and connections)	-	5000	-
29("Clearances, creepage distances and solid insulation")	-	5000	-
30(Resistance to heat and fire)	-	5000	-
30.101(Resistance to heat and fire)	-	5000	-
31(Resistance to rusting)	-	5000	-
32("Radiation, toxicity and similar hazards")	-	5000	-
Cl 19.11.4.1(Electrostatic discharges)	-	5000	-
Cl 19.11.4.3(Fast transient bursts)	-	5000	-
Cl 19.11.4.4(Voltage surges)	-	5000	-
Cl 19.11.4.6(Voltage dips and interruptions)	-	5000	-
Cl 19.11.4.7(Harmonics and inter-harmonics)	-	5000	-
Cl 19.11.4.8(Abnormal operation)	-	5000	-
7(Marking and instructions)	-	5000	-
8(Protection against access to live parts)	-	5000	-
10(Power input and current)	-	5000	-
10(Power input and current)	-	5000	-
11(Heating)	-	5000	-
13.1 &13.2(Leakage current test)	-	5000	-
13.1 &13.3(Electric strength test)	-	5000	-
14(Transient overvoltages)	-	5000	-
15(Moisture resistance)	-	5000	-
15.3(Moisture resistance)	-	5000	-
16.1 &16.2(Leakage current test)	-	5000	-
16.1 & 16.3(Electric strength test)	-	5000	-
17(Overload protection of transformers and associated circuits)	-	5000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	5000	-
20.1(Stability and mechanical hazards)	-	5000	-
20.2(Stability and mechanical hazards)	-	5000	-
21(Mechanical strength)	-	5000	-
22(Construction)	-	5000	-
23(Internal wiring)	-	5000	-
24(Components)	-	5000	-
24.101(Components)	-	5000	-
25("Supply connection and external flexible cords")	-	5000	-
26("Terminals for external conductors")	-	5000	-
27(Provision for earthing)	-	5000	-
28(Screws and connections)	-	5000	-
29("Clearances, creepage distances and solid insulation")	-	5000	-
30(Resistance to heat and fire)	-	5000	-
30.101(Resistance to heat and fire)	-	5000	-
31(Resistance to rusting)	-	5000	-
Cl 19.11.4.1(Electrostatic discharges)	-	5000	-
Cl 19.11.4.3(Fast transient bursts)	-	5000	-
Cl 19.11.4.4(Voltage surges)	-	5000	-
Cl 19.11.4.6(Voltage dips and interruptions)	-	5000	-
Cl 19.11.4.7(Harmonics and inter-harmonics)	-	5000	-
Cl 19.11.4.8(Abnormal operation)	-	5000	-

15 Oct, 2027

-
Incuded w.e.f.06.05.2025 Exclusion Cl 19.11.4.2 (Radiated fields) Cl 19.11.4.5 (Immunity to conducted disturbances) 32 ("Radiation, toxicity and similar hazards")

IS 302 : Part 2 : Sec 13 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 13 Deep Fat Fryers, Frying Pans and Similar Appliances (First Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	5000	-
8(Protection against access to live parts)	-	5000	-
10(Power input and current)	-	5000	-
11(Heating)	-	5000	-
13.1 &13.2(Leakage current test)	-	5000	-
13.1 &13.3(Electric strength test)	-	5000	-
14(Transient overvoltages)	-	5000	-
15(Moisture resistance)	-	5000	-
15.3(Moisture resistance)	-	5000	-
15.101(Moisture resistance)	-	5000	-
16.1 &16.2(Leakage current test)	-	5000	-
16.1 & 16.3(Electric strength test)	-	5000	-
17(Overload protection of transformers and associated circuits)	-	5000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	5000	-
19.101 to to 19.102(Abnormal operation)	-	5000	-
20(Stability and mechanical hazards)	-	5000	-
21(Mechanical strength)	-	5000	-
22(Construction)	-	5000	-
22.101(Construction)	-	5000	-
23(Internal wiring)	-	5000	-
24(Components)	-	5000	-
25("Supply connection and external flexible cords")	-	5000	-
26("Terminals for external conductors")	-	5000	-
27(Provision for earthing)	-	5000	-
28(Screws and connections)	-	5000	-
29("Clearances, creepage distances and solid insulation")	-	5000	-
30(Resistance to heat and fire)	-	5000	-
31(Resistance to rusting)	-	5000	-
32("Radiation, toxicity and similar hazards")	-	5000	-
7(Marking and instructions)	-	5000	-
8(Protection against access to live parts)	-	5000	-
10(Power input and current)	-	5000	-
11(Heating)	-	5000	-
13.1 &13.2(Leakage current test)	-	5000	-
13.1 &13.3(Electric strength test)	-	5000	-
14(Transient overvoltages)	-	5000	-
15(Moisture resistance)	-	5000	-
15.3(Moisture resistance)	-	5000	-
15.101(Moisture resistance)	-	5000	-
16.1 &16.2(Leakage current test)	-	5000	-
16.1 & 16.3(Electric strength test)	-	5000	-
17(Overload protection of transformers and associated circuits)	-	5000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	5000	-
19.101 to to 19.102(Abnormal operation)	-	5000	-
20(Stability and mechanical hazards)	-	5000	-
21(Mechanical strength)	-	5000	-
22(Construction)	-	5000	-
22.101(Construction)	-	5000	-
23(Internal wiring)	-	5000	-
24(Components)	-	5000	-
25("Supply connection and external flexible cords")	-	5000	-
26("Terminals for external conductors")	-	5000	-
27(Provision for earthing)	-	5000	-
28(Screws and connections)	-	5000	-
29("Clearances, creepage distances and solid insulation")	-	5000	-
30(Resistance to heat and fire)	-	5000	-
31(Resistance to rusting)	-	5000	-

15 Oct, 2027

-
Included w.e.f.06.05.2025 Exclusion Cl 19.1 to 19.13, Table No. - 9 (Abnormal operation) Cl 32 ("Radiation, toxicity and similar hazards")

IS 302 : Part 2 : Sec 32 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 32 massage appliances

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-32 : 1994(Radiation Hazards)	-	5000	-
Cl. 31 302-2-32 : 1994(Resistance to Rusting)	-	5000	-
Cl. 30 302-2-32 : 1994(Resistance to Heat Fire & Tracking )	-	5000	-
Cl. 29 302-2-32 : 1994(Clearances, Creepage Distances & Solid insulation )	-	5000	-
Cl. 28 302-2-32 : 1994(Screws & Connections)	-	5000	-
Cl. 27 302-2-32 : 1994(Provision for Earthing )	-	5000	-
Cl. 26 302-2-32 : 1994(Terminals for External conductors )	-	5000	-
Cl. 25 302-2-32 : 1994(Supply Connection & External Flexible Cords)	-	5000	-
Cl. 24 302-2-32 : 1994(Components)	-	5000	-
Cl. 23 302-2-32 : 1994(Internal Wiring)	-	5000	-
Cl. 22 302-2-32 : 1994(Construction )	-	5000	-
Cl. 21 302-2-32 : 1994(Mechanical strength)	-	5000	-
Cl. 20 302-2-32 : 1994(Stability & Mechanical Hazards)	-	5000	-
Cl. 19 302-2-32 : 1994(Abnormal Operation )	-	5000	-
Cl. 18 302-2-32 : 1994(Endurance)	-	5000	-
Cl. 17 302-2-32 : 1994(Overload Protection of Transformers and Associated Circuit)	-	5000	-
Cl. 16 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	5000	-
Cl. 15 302-2-32: 1994(Moisture Resistance Test )	-	5000	-
Cl. 14 302-2-32 : 1994(Radio and television interference suppression / Transient over voltages)	-	5000	-
Cl. 13 302-2-32 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	5000	-
Cl. 11 302-2-32 : 1994(Temperature Rise)	-	5000	-
Cl. 10 302-2-32 : 1994(Power Input and Current )	-	5000	-
Cl. 9 302-2-32 : 1994(Protection Against Electric Shock)	-	5000	-
Cl. 8 302-2-32 : 1994(Starting of motor operated appliances)	-	5000	-
Cl. 7 302-2-32 : 1994(Marking)	-	5000	-
(CI. 6 IS 302-2-32 : 1994(Classification )	-	5000	-
19.11.4.1(Electrostatic discharges)	-	5000	-
19.11.4.3(Fast transient bursts)	-	5000	-
19.11.4.4(Surge immunity test)	-	5000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	5000	-
19.11.4.7(Harmonics)	-	5000	-

15 Oct, 2027

-
Included w.e.f.13.05.2025 Exclusion Cl 19.11.4.2 (Radiated fields) Cl 19.11.4.5 (Immunity to conducted discharges)

IS 302 : Part 2 : Sec 209 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 209 low speed food grinding machines

40000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-209 : 1994(Radiation Hazards)	-	5000	-
Cl. 31 302-2-209 : 1994(Resistance to Rusting)	-	5000	-
Cl. 30 302-2-209 : 1994(Resistance to Heat Fire & Tracking )	-	5000	-
Cl. 29 302-2-209 : 1994(Clearances, Creepage Distances & Solid insulation )	-	5000	-
Cl. 28 302-2-209 : 1994(Screws & Connections)	-	5000	-
Cl. 27 302-2-209 : 1994(Provision for Earthing )	-	5000	-
Cl. 26 302-2-209 : 1994(Terminals for External conductors )	-	5000	-
Cl. 25 302-2-209 : 1994(Supply Connection & External Flexible Cords)	-	5000	-
Cl. 24 302-2-209 : 1994(Components)	-	5000	-
Cl. 23 302-2-209 : 1994(Internal Wiring)	-	5000	-
Cl. 22 302-2-209 : 1994(Construction )	-	5000	-
Cl. 21 302-2-209 : 1994(Mechanical strength)	-	5000	-
Cl. 20 302-2-209 : 1994(Stability & Mechanical Hazards)	-	5000	-
Cl. 19 302-2-209 : 1994(Abnormal Operation )	-	5000	-
Cl. 18 302-2-209 : 1994(Endurance)	-	5000	-
Cl. 17 302-2-209 : 1994(Overload Protection of Transformers and Associated Circuit)	-	5000	-
Cl. 16 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	5000	-
Cl. 15 302-2-209 : 1994(Moisture Resistance Test )	-	5000	-
Cl. 14 302-2-209 : 1994(Radio and television interference suppression / Transient over voltages)	-	5000	-
Cl. 13 302-2-209 : 1994(Leakage Current & Electric Strength at Operating Temperature)	-	5000	-
Cl. 11 302-2-209 : 1994(Temperature Rise)	-	5000	-
Cl. 10 302-2-209 : 1994(Power Input and Current )	-	5000	-
Cl. 9 302-2-209 : 1994(Starting of motor operated appliances)	-	5000	-
Cl. 8 302-2-209 : 1994(Protection Against Electric Shock )	-	5000	-
Cl. 7 302-2-209 : 1994(Marking)	-	5000	-
(CI. 6 IS 302-2-209 : 1994(Classification )	-	5000	-
Cl. 5 IS 302-2-209 :1994(Rating)	-	5000	-
Cl-19.11.4.1(Electrostatic discharge)	-	5000	-
Cl-19.11.4.3(Fast transient bursts)	-	5000	-
Cl-19.11.4.4(Surge Immunity test)	-	5000	-
Cl-19.11.4.6(Voltage dips and interruptions)	-	5000	-
Cl-19.11.4.7(Harmonics)	-	5000	-

15 Oct, 2027

-
Included w.e.f.13.05.2025 Exclusion Cl-19.11.4.2 (Radiated Fields) Cl-19.11.4.5 (Immunity to conducted discharge)

IS 302 : Part 2 : Sec 8 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 8 Shavers, Hair Clippers and Similar Appliances (First Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1500	-
8(Protection against access to live parts)	-	3000	-
10(Power input and current)	-	2000	-
11(Heating)	-	2000	-
12(Charging of metal-ion batteries)	-	2000	-
13.1 &13.2(Leakage current test)	-	1500	-
13.1 &13.3(Electric strength test)	-	2000	-
14(Transient overvoltages)	-	2000	-
15(Moisture resistance)	-	1500	-
15.3(Moisture resistance)	-	1500	-
16.1 &16.2(Leakage current test)	-	1500	-
16.1 & 16.3(Electric strength test)	-	1500	-
17(Overload protection of transformers and associated circuits)	-	1000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1000	-
19.101(Abnormal operation)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
21.101(Mechanical strength)	-	1000	-
21.102(Mechanical strength)	-	1000	-
21.103(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
23(Internal wiring)	-	1000	-
24(Components)	-	1000	-
25("Supply connection and external flexible cords")	-	1000	-
26("Terminals for external conductors")	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29("Clearances, creepage distances and solid insulation")	-	1000	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1000	-
32("Radiation, toxicity and similar hazards")	-	1000	-
7(Marking and instructions)	-	1000	-
8(Protection against access to live parts)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
12(Charging of metal-ion batteries)	-	1000	-
13.1 &13.2(Leakage current test)	-	1000	-
13.1 &13.3(Electric strength test)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	1500	-
15.3(Moisture resistance)	-	1000	-
16.1 &16.2(Leakage current test)	-	700	-
16.1 & 16.3(Electric strength test)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1000	-
19.101(Abnormal operation)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
21.101(Mechanical strength)	-	1000	-
21.102(Mechanical strength)	-	1000	-
21.103(Mechanical strength)	-	1000	-
22(Construction)	-	1500	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
23(Internal wiring)	-	500	-
24(Components)	-	500	-
25("Supply connection and external flexible cords")	-	1000	-
26("Terminals for external conductors")	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29("Clearances, creepage distances and solid insulation")	-	1000	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1000	-
32("Radiation, toxicity and similar hazards")	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
12(Charging of metal-ion batteries)	-	1000	-
13.1 &13.2(Leakage current test)	-	1000	-
13.1 &13.3(Electric strength test)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
16.1 &16.2(Leakage current test)	-	1000	-
16.1 & 16.3(Electric strength test)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1000	-
19.101(Abnormal operation)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
21.101(Mechanical strength)	-	1000	-
21.102(Mechanical strength)	-	1000	-
21.103(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
23(Internal wiring)	-	1000	-
24(Components)	-	1000	-
25("Supply connection and external flexible cords")	-	1000	-
26("Terminals for external conductors")	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29("Clearances, creepage distances and solid insulation")	-	1000	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1000	-
32("Radiation, toxicity and similar hazards")	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
12(Charging of metal-ion batteries)	-	1000	-
13.1 &13.2(Leakage current test)	-	1000	-
13.1 &13.3(Electric strength test)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	1000	-
15.3(Moisture resistance)	-	1000	-
16.1 &16.2(Leakage current test)	-	1000	-
16.1 & 16.3(Electric strength test)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1000	-
19.101(Abnormal operation)	-	1000	-
20.1(Stability and mechanical hazards)	-	1000	-
20.2(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	1000	-
21.101(Mechanical strength)	-	1000	-
21.102(Mechanical strength)	-	1000	-
21.103(Mechanical strength)	-	1000	-
22(Construction)	-	1000	-
22.101(Construction)	-	1000	-
22.102(Construction)	-	1000	-
22.103(Construction)	-	1000	-
23(Internal wiring)	-	1000	-
24(Components)	-	1000	-
25("Supply connection and external flexible cords")	-	1000	-
26("Terminals for external conductors")	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29("Clearances, creepage distances and solid insulation")	-	1000	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1000	-
32("Radiation, toxicity and similar hazards")	-	1000	-
19.11.4.1(Electrostatic discharges)	-	1000	-
19.11.4.3(Fast transient bursts)	-	1000	-
19.11.4.4(Surge immunity test)	-	1000	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	-
19.11.4.7(Harmonics)	-	1000	-

15 Oct, 2027

-
Included.w.e.f.07.04.2025. Exclusion Cl 19.11.4.5 (Immunity to conducted discharges), Cl 19.11.4.2 (Radiated fields)

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	5000	-
Cl-4.2(Secondary Cells and Batteries)	-	5000	-
Cl-4.3(General Operating Conditions)	-	5000	-
Cl-4.3.8(Storage)	-	5000	-
Cl-4.3.9(Operating Temperature)	-	5000	-
Cl-5.1(Mechanical Endurance)	-	5000	-
Cl-5.2(Charge Efficiency)	-	5000	-
Cl-5.3(Deep Discharge Protection)	-	5000	-
Cl-5.4(Marking)	-	5000	-
Cl-5.5(Safety)	-	5000	-
Cl-5.6(Documentation)	-	5000	-
Cl-6(Functional characteristice)	-	5000	-
Cl-7(General test conditions)	-	5000	-
Cl-8.1(Capacity Test)	-	5000	-
Cl-8.2(Endurance Test)	-	5000	-
Cl-8.3(Charge Retention Test)	-	5000	-
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	5000	-
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	5000	-
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	5000	-
Cl-9.1(Type Tests)	-	5000	-
Cl-9.2(Acceptance Test)	-	5000	-
4.3.7.1(Specific gravity)	-	5000	-

15 Oct, 2027

-
-

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	500	20% Discount to BIS
Cl.6 of IS 302-2-35:2017(Classification)	-	500	20% Discount to BIS
Cl.6 of IS 302-2-35:2017(Classification)	-	500	20% Discount to BIS
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	1000	20% Discount to BIS
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	1000	20% Discount to BIS
Cl.11 of 302-2-35:2017(Heating)	-	1000	20% Discount to BIS
Cl.11 of 302-2-35:2017(Heating)	-	1000	20% Discount to BIS
Cl.11 of 302-2-35:2017(Heating)	-	1000	20% Discount to BIS
Cl.11 of 302-2-35:2017(Heating)	-	1000	20% Discount to BIS
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	1000	20% Discount to BIS
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	1000	20% Discount to BIS
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	1000	20% Discount to BIS
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	1000	20% Discount to BIS
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	1000	20% Discount to BIS
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	1000	20% Discount to BIS
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	1000	20% Discount to BIS
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	1000	20% Discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	20% Discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	20% Discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	20% Discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	20% Discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	20% Discount to BIS
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	1000	20% Discount to BIS
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	1000	20% Discount to BIS
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	20% Discount to BIS
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	20% Discount to BIS
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	20% Discount to BIS
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	20% Discount to BIS
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	20% Discount to BIS
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	20% Discount to BIS
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	20% Discount to BIS
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	20% Discount to BIS
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	20% Discount to BIS
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	20% Discount to BIS
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	20% Discount to BIS
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	20% Discount to BIS
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	20% Discount to BIS
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	20% Discount to BIS
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	500	20% Discount to BIS
Cl.24 of IS 302-2-35:2017(Component )	-	500	20% Discount to BIS
Cl.24 of IS 302-2-35:2017(Component )	-	500	20% Discount to BIS
Cl.24 of IS 302-2-35:2017(Component )	-	500	20% Discount to BIS
Cl.24 of IS 302-2-35:2017(Component )	-	500	20% Discount to BIS
Cl.24 of IS 302-2-35:2017(Component )	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	20% Discount to BIS
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	20% Discount to BIS
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	20% Discount to BIS
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	20% Discount to BIS
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	20% Discount to BIS
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	20% Discount to BIS
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	20% Discount to BIS
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	20% Discount to BIS
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	20% Discount to BIS
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	20% Discount to BIS
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	20% Discount to BIS
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	20% Discount to BIS
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	20% Discount to BIS
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	20% Discount to BIS
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	20% Discount to BIS
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	20% Discount to BIS
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	20% Discount to BIS
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	20% Discount to BIS
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	500	20% Discount to BIS
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	20% Discount to BIS
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	20% Discount to BIS
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	500	20% Discount to BIS
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	500	20% Discount to BIS
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	500	20% Discount to BIS
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	500	20% Discount to BIS
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	500	20% Discount to BIS
Cl.10 of IS 8978 : 1992(Finish)	-	500	20% Discount to BIS
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	500	20% Discount to BIS
Cl.12 of IS 8978 : 1992(Endurance)	-	200	20% Discount to BIS
Cl.12 of IS 8978 : 1992(Endurance)	-	200	20% Discount to BIS
Cl.10 of IS 8978 : 1992(Finish)	-	200	20% Discount to BIS
Cl.31 of IS 302-2-35: 2017(Resistance to Rusting )	-	500	20% Discount to BIS
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	500	20% Discount to BIS
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	500	20% Discount to BIS
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	500	20% Discount to BIS
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	500	20% Discount to BIS
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	500	20% Discount to BIS
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	500	20% Discount to BIS
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	500	20% Discount to BIS
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	500	20% Discount to BIS
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	500	20% Discount to BIS
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	500	20% Discount to BIS
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	500	20% Discount to BIS
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	500	20% Discount to BIS
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	500	20% Discount to BIS
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	500	20% Discount to BIS
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	500	20% Discount to BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl.24 of IS 302-2-35:2017(Component )	-	500	20% Discount to BIS
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	500	20% Discount to BIS
Cl.23 of IS 302-2-35:2017(Internal Wiring)	-	500	20% Discount to BIS
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	500	20% Discount to BIS
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	500	20% Discount to BIS
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	500	20% Discount to BIS
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	500	20% Discount to BIS
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	500	20% Discount to BIS
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	500	20% Discount to BIS
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	500	20% Discount to BIS
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	500	20% Discount to BIS
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	500	20% Discount to BIS
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	500	20% Discount to BIS
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	500	20% Discount to BIS
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	500	20% Discount to BIS
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	500	20% Discount to BIS
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	500	20% Discount to BIS
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	500	20% Discount to BIS
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	500	20% Discount to BIS
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	500	20% Discount to BIS
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	500	20% Discount to BIS
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	500	20% Discount to BIS
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	500	20% Discount to BIS
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	500	20% Discount to BIS
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	500	20% Discount to BIS
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	500	20% Discount to BIS
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	500	20% Discount to BIS
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	500	20% Discount to BIS
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	500	20% Discount to BIS
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	500	20% Discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	500	20% Discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	500	20% Discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	500	20% Discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of test corner)	-	500	20% Discount to BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Emission of flames, molten metal ,or poisonous or ignitable gas)	-	500	20% Discount to BIS
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	500	20% Discount to BIS
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	500	20% Discount to BIS
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	500	20% Discount to BIS
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	500	20% Discount to BIS
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	500	20% Discount to BIS
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature )	-	500	20% Discount to BIS
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	500	20% Discount to BIS
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	500	20% Discount to BIS
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	500	20% Discount to BIS
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	500	20% Discount to BIS
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	500	20% Discount to BIS
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	500	20% Discount to BIS
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	500	20% Discount to BIS
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	500	20% Discount to BIS
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	500	20% Discount to BIS
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	500	20% Discount to BIS
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	500	20% Discount to BIS
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	500	20% Discount to BIS
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	500	20% Discount to BIS
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	500	20% Discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	500	20% Discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	500	20% Discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	500	20% Discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	500	20% Discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	500	20% Discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	500	20% Discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	500	20% Discount to BIS
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	500	20% Discount to BIS
4(GENERAL REQUIREMENTS)	-	200	20% Discount to BIS
5(GENERAL NOTE ON TEST)	-	200	20% Discount to BIS
Cl-19.11.4.1(Electrostatic discharge)	-	500	20% Discount to BIS
Cl-19.11.4.3(Fast transient bursts)	-	500	20% Discount to BIS
Cl-19.11.4.4(Surge Immunity test)	-	500	20% Discount to BIS
Cl-19.11.4.6(Voltage dips and interruptions)	-	500	20% Discount to BIS
Cl-19.11.4.7(Harmonics)	-	500	20% Discount to BIS
7(Marking)	-	500	20% Discount to BIS
7(Marking)	-	500	20% Discount to BIS
(Cl.7.1 of IS 302-2-35:2017)(Marking)	-	500	20% Discount to BIS
(Cl.7.101 of IS 302-2-35:2017)(Marking)	-	500	20% Discount to BIS
(Cl.8.1.1 of IS 8978:1992)(Marking)	-	500	20% Discount to BIS
(Cl.19.13 of IS 302-2-35:2017)(Abnormal operation)	-	500	20% Discount to BIS
(Cl.19.13 of IS 302-2-35:2017)(Abnormal operation)	-	500	20% Discount to BIS
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	20% Discount to BIS
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	20% Discount to BIS
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	20% Discount to BIS
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	20% Discount to BIS
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	20% Discount to BIS
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	20% Discount to BIS
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	20% Discount to BIS
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	20% Discount to BIS
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	20% Discount to BIS
(Cl.22 of IS 302-2-35:2017)(Construction)	-	500	20% Discount to BIS
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	500	20% Discount to BIS
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	500	20% Discount to BIS
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	500	20% Discount to BIS
(Cl.23 of IS 302-2-35:2017)(Internal wiring)	-	500	20% Discount to BIS
(Cl.24 of IS 302-2-35:2017)(Components)	-	500	20% Discount to BIS
(Cl.24 of IS 302-2-35:2017)(Components)	-	500	20% Discount to BIS
(Cl.24 of IS 302-2-35:2017)(Components)	-	500	20% Discount to BIS
(Cl.24 of IS 302-2-35:2017)(Components)	-	500	20% Discount to BIS
(Cl.24 of IS 302-2-35:2017)(Components)	-	500	20% Discount to BIS
(Cl.25.8 of IS 302-2-35:2017)(Supply Connection and External Flexible cords)	-	500	20% Discount to BIS
(CL.27.5 of IS 302-2-35:2017)(Provision for Earthing)	-	500	20% Discount to BIS

15 Oct, 2027

-
Included.w.e.f.08.01.2025 Exclusion Cl 19.11.4.5 (Immunity to conducted discharges) Cl 19.11.4.2 (Radiated fields)

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.32(Verification)	-	500	20% Discount to BIS
Cl.31(Verification)	-	500	20% Discount to BIS
Cl.30(Verification)	-	500	20% Discount to BIS
CL.29(Verification)	-	500	20% Discount to BIS
Cl.28(Verification)	-	500	20% Discount to BIS
Cl.27(Verification)	-	500	20% Discount to BIS
Cl.26(Verification)	-	500	20% Discount to BIS
Cl.25(Verification)	-	500	20% Discount to BIS
Cl.24(Verification)	-	500	20% Discount to BIS
Cl.23(Verification)	-	500	20% Discount to BIS
Cl.22(Verification)	-	500	20% Discount to BIS
Cl.21(Verification)	-	500	20% Discount to BIS
Cl.20(Verification)	-	500	20% Discount to BIS
Cl.19(Verification)	-	500	20% Discount to BIS
Cl.17(Verification)	-	500	20% Discount to BIS
Cl. 16(Verification)	-	500	20% Discount to BIS
Cl.15(Verification)	-	500	20% Discount to BIS
Cl.14(Verification)	-	500	20% Discount to BIS
Cl.13(Verification)	-	500	20% Discount to BIS
Cl.11(Verification)	-	500	20% Discount to BIS
Cl.10(Verification)	-	500	20% Discount to BIS
Cl.8(Verification)	-	500	20% Discount to BIS
Cl. 7(Verification)	-	500	20% Discount to BIS
Cl. 7(Verification)	-	500	20% Discount to BIS
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	500	20% Discount to BIS
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	800	20% Discount to BIS
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	800	20% Discount to BIS
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	700	20% Discount to BIS
Cl. 28 IS 302-2-35(Screws & Connections)	-	500	20% Discount to BIS
Cl. 27 IS 302-2-35(Provision for Earthing )	-	500	20% Discount to BIS
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	500	20% Discount to BIS
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	500	20% Discount to BIS
Cl. 24 IS 302-2-35(Components)	-	500	20% Discount to BIS
Cl. 23 IS 302-2-35(Internal Wiring)	-	500	20% Discount to BIS
Cl. 22 IS 302-2-35(Construction )	-	500	20% Discount to BIS
Cl. 21 IS 302-2-35(Mechanical strength)	-	500	20% Discount to BIS
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	500	20% Discount to BIS
Cl. 19 IS 302-2-35(Abnormal Operation )	-	500	20% Discount to BIS
Cl. 18 IS 302-2-35(Endurance)	-	500	20% Discount to BIS
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	700	20% Discount to BIS
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	800	20% Discount to BIS
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	800	20% Discount to BIS
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	700	20% Discount to BIS
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	700	20% Discount to BIS
Cl. 11 IS 302-2-35(Heating)	-	600	20% Discount to BIS
Cl. 10 IS 302-2-35(Power Input and Current )	-	800	20% Discount to BIS
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	500	20% Discount to BIS
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	800	20% Discount to BIS
Cl. 7 IS 302-2-35(Marking and Instruction)	-	500	20% Discount to BIS
Cl. 6 IS 302-2-35(Classification)	-	500	20% Discount to BIS
19.11.4.7(Harmonics)	-	500	20% Discount to BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	20% Discount to BIS
19.11.4.4(Surge immunity test)	-	500	20% Discount to BIS
19.11.4.3(Fast transient bursts)	-	500	20% Discount to BIS
19.11.4.1(Electrostatic discharges)	-	500	20% Discount to BIS
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	20% Discount to BIS
4(GENERAL REQUIREMENT)	-	500	20% Discount to BIS

15 Oct, 2027

-
Included.w.e.f.08.01.2025 Exclusion Cl 19.11.4.5 (Immunity to conducted discharges) Cl 19.11.4.2 (Radiated fields)

IS 367 (1993)

Electric kettles and jugs for household and similar use - Specification (Fourth Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20(Finish)	-	1000	20% Discount to BIS
19(Endurance)	-	1000	20% Discount to BIS
18(Thermal Efficiency)	-	1000	20% Discount to BIS
17(Temperature of supporting surface)	-	1000	20% Discount to BIS
16(Minimum quantity of water that can be boiled)	-	1000	20% Discount to BIS
15(Time to boil water capacity)	-	1000	20% Discount to BIS
14(Time to boil one litre of water)	-	1000	20% Discount to BIS
13(Water Capacity)	-	500	20% Discount to BIS
12(Mass)	-	500	20% Discount to BIS
11(Overall Dimensions)	-	500	20% Discount to BIS
9(Safety Requirements)	-	500	20% Discount to BIS
8(Marking and Instruction)	-	500	20% Discount to BIS
7(Classification)	-	500	20% Discount to BIS
6(Rating)	-	500	20% Discount to BIS
Cl-9 (Cl-8 of IS 302-2-15)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	1000	20% Discount to BIS
Cl-9 (Cl-10 of IS 302-2-15)(POWER INPUT AND CURRENT)	-	1000	20% Discount to BIS
Cl-9 (Cl-11 of IS 302-2-15)(HEATING)	-	1000	20% Discount to BIS
Cl-9 (Cl-13 of IS 302-2-15)(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	20% Discount to BIS
Cl-9 (Cl-14 of IS 302-2-15)(TRANSIENT OVER VOLTAGES)	-	1000	20% Discount to BIS
Cl-9 (Cl-15 of IS 302-2-15)(MOISTURE RESISTANCE)	-	1000	20% Discount to BIS
Cl-9 (Cl-16 of IS 302-2-15)(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	20% Discount to BIS
Cl-9 (Cl-17 of IS 302-2-15)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	20% Discount to BIS
Cl-9 (Cl-19 of IS 302-2-15)(ABNORMAL OPERATION)	-	1000	20% Discount to BIS
Cl-9 (Cl-20 of IS 302-2-15)(STABILITY AND MECHANICAL HAZARDS)	-	1000	20% Discount to BIS
Cl-9 (Cl-21 of IS 302-2-15)(MECHANICAL STRENGTH)	-	1000	20% Discount to BIS
Cl-9 (Cl-22 of IS 302-2-15)(CONSTRUCTION)	-	1000	20% Discount to BIS
Cl-9 (Cl-23 of IS 302-2-15)(INTERNAL WIRING)	-	1000	20% Discount to BIS
Cl-9 (Cl-24 of IS 302-2-15)(COMPONENTS)	-	500	20% Discount to BIS
Cl-9 (Cl-25 of IS 302-2-15)(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	20% Discount to BIS
Cl-9 (Cl-26 of IS 302-2-15)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	20% Discount to BIS
Cl-9 (Cl-27 of IS 302-2-15)(PROVISION FOR EARTHING)	-	1000	20% Discount to BIS
Cl-9 (Cl-28 of IS 302-2-15)(SCREWS AND CONNECTIONS)	-	1000	20% Discount to BIS
Cl-9 (Cl-29 of IS 302-2-15)(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	20% Discount to BIS
Cl-9 (Cl-30 of IS 302-2-15)(RESISTANCE TO HEAT AND FIRE)	-	1000	20% Discount to BIS
Cl-9 (Cl-31 of IS 302-2-15)(RESISTANCE TO RUSTING)	-	1000	20% Discount to BIS
Cl-9 (Cl-32 of IS 302-2-15)(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1000	20% Discount to BIS

15 Oct, 2027

-
Included.w.e.f.08.01.2025

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	1000	20% discount to BIS
6(Classification- IS 302-1)	-	500	20% discount to BIS
5(General conditions for the tests)	-	500	20% discount to BIS
19.11.4.7(Harmonics)	-	1000	20% discount to BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	20% discount to BIS
19.11.4.4(Surge immunity test)	-	1000	20% discount to BIS
19.11.4.3(Fast transient bursts)	-	1000	20% discount to BIS
19.11.4.1(Electrostatic discharges)	-	1000	20% discount to BIS
11.8(Temperature rise)	-	1000	20% discount to BIS
11.7(Duration corresponding)	-	1000	20% discount to BIS
11.6(Combined appliances)	-	1000	20% discount to BIS
11.5(Motor-operated appliances)	-	1200	20% discount to BIS
11.4(Heating appliances)	-	900	20% discount to BIS
8.1.5(Live parts of built-in appliances)	-	1000	20% discount to BIS
18(Endurance)	-	500	20% discount to BIS
17(Overload protection of transformers and associated circuits)	-	1000	20% discount to BIS
16(Leakage current and electric strength)	-	1000	20% discount to BIS
4(General requirement)	-	500	20% discount to BIS
32.1(Radiation Toxicity and Similar Hazards)	-	1000	20% discount to BIS
31(Resistance to Rusting)	-	1000	20% discount to BIS
30.2(Needle Flame Test)	-	1000	20% discount to BIS
30.2(Glow Wire Test)	-	1000	20% discount to BIS
30.1(Ball pressure test)	-	1000	20% discount to BIS
29(clearance, creepage distances and solid insulation)	-	1000	20% discount to BIS
28(Screw test and connections)	-	1000	20% discount to BIS
27.1(Provision for Earthing, IS 302-1)	-	1000	20% discount to BIS
26(Terminals for external conductors)	-	1000	20% discount to BIS
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% discount to BIS
24(Components)	-	1000	20% discount to BIS
23.1(Internal Wiring, IS 302-1)	-	1000	20% discount to BIS
22.1(Construction, IS 302-1)	-	1000	20% discount to BIS
21.1(Mechanical Strength, IS 302-1)	-	1000	20% discount to BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	1000	20% discount to BIS
19(Abnormal Operation)	-	1000	20% discount to BIS
18(Endurance)	-	500	20% discount to BIS
17(Over Load Protection of Transformers and associated circuits)	-	1000	20% discount to BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	20% discount to BIS
16.2(Leakage Current (after Clause 15))	-	1000	20% discount to BIS
16.1(General)	-	500	20% discount to BIS
16.0(General)	-	500	20% discount to BIS
15.3(Humidity Test)	-	1000	20% discount to BIS
15.2(Spillage Test)	-	1000	20% discount to BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	20% discount to BIS
15.0(Moisture resistance)	-	1000	20% discount to BIS
14(Transient Over Voltages)	-	1000	20% discount to BIS
13.3(Electric Strength at operating temperature)	-	1000	20% discount to BIS
13.2(Leakage current at operating temperature)	-	1000	20% discount to BIS
13(Leakage current and electric strength at operating temperature)	-	1000	20% discount to BIS
11.3(Heating)	-	1000	20% discount to BIS
11.2(General)	-	500	20% discount to BIS
11.1(General)	-	500	20% discount to BIS
10.2(Current input)	-	1000	20% discount to BIS
10.1(Power input)	-	1000	20% discount to BIS
9(Starting of motor operation test requirements and tests)	-	1000	20% discount to BIS
8.1.4(Protection against live parts against protective impedance)	-	1000	20% discount to BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	1000	20% discount to BIS
8.1.2(Protection against live parts in openings)	-	1000	20% discount to BIS
8.1.1(Protection against live parts in all positions)	-	1000	20% discount to BIS
7(Marking and instructions)	-	500	20% discount to BIS
A.2(Earth continuity test)	-	1000	20% discount to BIS
Annex C(Ageing test on motors)	-	1000	20% discount to BIS
Annex D(Thermal motor protectors)	-	1000	20% discount to BIS
15.2(Moisture resistance)	-	1000	20% discount to BIS
19.17(Abnormal Operation, IS 302-1)	-	1000	20% discount to BIS
20.2(Stability & Mechanical Hazards, IS 302-1)	-	1000	20% discount to BIS
21.2(Mechanical Strength, IS 302-1)	-	1000	20% discount to BIS
21.3(Mechanical Strength, IS 302-1)	-	1000	20% discount to BIS
22.5(Construction)	-	1000	20% discount to BIS
22.6(Construction, IS 302-1)	-	1000	20% discount to BIS
22.11(Construction, IS 302-1)	-	1000	20% discount to BIS
22.16(Construction)	-	1000	20% discount to BIS
22.32(Construction, IS 302-1)	-	1000	20% discount to BIS
22.42(Construction)	-	1000	20% discount to BIS
23.3(Internal Wiring, IS 302-1)	-	1000	20% discount to BIS
25.6(Supply connection and external flexible cords, IS 302-1)	-	1000	20% discount to BIS
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% discount to BIS
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% discount to BIS
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% discount to BIS
26.5(Terminals for external conductors)	-	1000	20% discount to BIS
27.5(Provision for Earthing, IS 302-1)	-	1000	20% discount to BIS
28.1(Screws and connections)	-	1000	20% discount to BIS
22.2(Construction, IS 302-1)	-	1000	20% discount to BIS
22.3(Construction, IS 302-1)	-	1000	20% discount to BIS
B.22.4(Construction, IS 302-1)	-	1000	20% discount to BIS
B.22.5(Construction, IS 302-1)	-	1000	20% discount to BIS

15 Oct, 2027

view Scope file
Included w.e.f 02.01.2025 Exclusion : Cl 19.11.4.5 (Immunity to conducted discharges), Cl 19.11.4.2 (Radiated fields) "Domestic Electric Clothes Washing Machines (For testing charges please refer part 2 standard in LIMS)"

IS 302 : Part 2 : Sec 2 (1997)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 2 vacuum cleaners and water suction cleaning appliances

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	20% Discount to BIS
6(Classification)	-	500	20% Discount to BIS
7(Marking)	-	1000	20% Discount to BIS
8(Protection against Access to Live Parts)	-	1500	20% Discount to BIS
9(Starting Of Motor Operated Appliances)	-	1000	20% Discount to BIS
10("Power Input & Current")	-	1000	20% Discount to BIS
11(Temperature Rise/ Heating)	-	1000	20% Discount to BIS
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	1000	20% Discount to BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	20% Discount to BIS
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	1000	20% Discount to BIS
15(MOISTURE RESISTANCE)	-	1000	20% Discount to BIS
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	1000	20% Discount to BIS
17(OVERLOAD PROTECTION)	-	1000	20% Discount to BIS
19(ABNORMAL OPERATION)	-	1000	20% Discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	20% Discount to BIS
21(MECHANICAL STRENGTH)	-	1000	20% Discount to BIS
22(Construction)	-	1000	20% Discount to BIS
23(INTERNAL WIRING)	-	1000	20% Discount to BIS
24(COMPONENTS)	-	1000	20% Discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	1000	20% Discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	20% Discount to BIS
27(PROVISION FOR EARTHING)	-	1000	20% Discount to BIS
28(SCREWS AND CONNECTIONS)	-	1000	20% Discount to BIS
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	1000	20% Discount to BIS
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1000	20% Discount to BIS
31(RESISTANCE TO RUSTING)	-	1000	20% Discount to BIS
32(RADIATION HAZARDS)	-	1000	20% Discount to BIS
5(Rating)	-	500	20% Discount to BIS
6(Classification)	-	500	20% Discount to BIS
7(Marking)	-	500	20% Discount to BIS
8(Protection against Access to Live Parts)	-	1000	20% Discount to BIS
9(Starting Of Motor Operated Appliances)	-	1000	20% Discount to BIS
10("Power Input & Current")	-	1000	20% Discount to BIS
11(Temperature Rise/ Heating)	-	1000	20% Discount to BIS
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	1000	20% Discount to BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	20% Discount to BIS
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	1000	20% Discount to BIS
15(MOISTURE RESISTANCE)	-	1000	20% Discount to BIS
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	1000	20% Discount to BIS
17(OVERLOAD PROTECTION)	-	1000	20% Discount to BIS
19(ABNORMAL OPERATION)	-	1000	20% Discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	1000	20% Discount to BIS
21(MECHANICAL STRENGTH)	-	1000	20% Discount to BIS
22(Construction)	-	1000	20% Discount to BIS
23(INTERNAL WIRING)	-	1000	20% Discount to BIS
24(COMPONENTS)	-	1000	20% Discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	1000	20% Discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	20% Discount to BIS
27(PROVISION FOR EARTHING)	-	1000	20% Discount to BIS
28(SCREWS AND CONNECTIONS)	-	1000	20% Discount to BIS
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	1000	20% Discount to BIS
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1000	20% Discount to BIS
31(RESISTANCE TO RUSTING)	-	1000	20% Discount to BIS
32(RADIATION HAZARDS)	-	1000	20% Discount to BIS
19.11.4.7(Harmonics)	-	1000	20% Discount to BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	20% Discount to BIS
19.11.4.4(Surge immunity test)	-	1000	20% Discount to BIS
19.11.4.3(Fast transient bursts)	-	1000	20% Discount to BIS
19.11.4.1(Electrostatic discharges)	-	1000	20% Discount to BIS

15 Oct, 2027

-
Included.w.e.f.26.12.2024 Exclusion Cl 19.11.4.5 (Immunity to conducted discharges) Cl 19.11.4.2 (Radiated fields)

IS 302 : Part 2 : Sec 203 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 203 electric call bells and buzzers for indoor use

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	20% Discount to BIS
6(Classification)	-	500	20% Discount to BIS
7(Marking)	-	500	20% Discount to BIS
8(Protection against Access to Live Parts)	-	1000	20% Discount to BIS
9(Starting Of Motor Operated Appliances)	-	500	20% Discount to BIS
10("Power Input & Current")	-	1000	20% Discount to BIS
11(Temperature Rise/ Heating)	-	1000	20% Discount to BIS
12(Operation Under Overload Conditions of Appliances with heating Element)	-	1000	20% Discount to BIS
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	20% Discount to BIS
14("Radio and Television Interference Suppression / Transient Over Voltage ")	-	1000	20% Discount to BIS
15(Moisture Resistance)	-	1000	20% Discount to BIS
16(Leakage Current and Electric Strength/ Insulation Resistance and Electric Strength (After Humidity treatment))	-	1000	20% Discount to BIS
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	1000	20% Discount to BIS
18(Endurance)	-	1000	20% Discount to BIS
19(Abnormal Operation)	-	1000	20% Discount to BIS
20(Stability & Mechanical Hazards)	-	1000	20% Discount to BIS
21(Mechanical strength)	-	1000	20% Discount to BIS
22(Construction)	-	1000	20% Discount to BIS
23(Internal Wiring)	-	1000	20% Discount to BIS
24(Components)	-	1000	20% Discount to BIS
25(Supply Connection & External Flexible Cords)	-	1000	20% Discount to BIS
26(Terminals For External Conductors)	-	1000	20% Discount to BIS
27(Provision For Earthing)	-	1000	20% Discount to BIS
28(Screws & Connections)	-	1000	20% Discount to BIS
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	20% Discount to BIS
30(Resistance to Heat & Fire)	-	1000	20% Discount to BIS
31(Resistance to Rusting)	-	1000	20% Discount to BIS
32(Radiation hazards)	-	1000	20% Discount to BIS

15 Oct, 2027

-
Included.w.e.f.24.12.2024

IS 18112 (2022)

Digital Television Receiver for Satellite Broadcast Transmission Specification

125000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	5000	20% Discount to BIS
3.3(Specifications)	-	5000	20% Discount to BIS
3.5(Safety specification)	-	5000	20% Discount to BIS
4(Marking)	-	5000	20% Discount to BIS
5(Operating Life Test)	-	5000	20% Discount to BIS
3.1, Table-1, i) a)(Hardware specification)	-	5000	20% Discount to BIS
3.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	5000	20% Discount to BIS
3.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	5000	20% Discount to BIS
3.1, Table-1, i) d)(Decompression and decoding of audio)	-	5000	20% Discount to BIS
3.1, Table-1, i) e)(Active Format descriptors)	-	5000	20% Discount to BIS
3.1, Table-1, i) f)(Captioning and Sub-titling)	-	5000	20% Discount to BIS
3.1, Table-1, i) g)(Teletext)	-	5000	20% Discount to BIS
3.1, Table-1, i) h)(Multi-language support)	-	5000	20% Discount to BIS
3.1, Table-1, i) j)(DTV receiver mixed Audio Descriptio)	-	5000	20% Discount to BIS
3.1, Table-1, i) k)(Broadcast mixed audio description)	-	5000	20% Discount to BIS
3.1, Table-1, i) m)(Service demultiplexing)	-	5000	20% Discount to BIS
3.1, Table-1, i) n)(Data services)	-	5000	20% Discount to BIS
3.1, Table-1, i) p)(OSD)	-	5000	20% Discount to BIS
3.1, Table-1, i) q)(DTV Receiver character set)	-	5000	20% Discount to BIS
3.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	5000	20% Discount to BIS
3.1, Table-1, i) s)(Time)	-	5000	20% Discount to BIS
3.1, Table-1, i) t)(Digital TV output)	-	5000	20% Discount to BIS
3.4, Table-2, i) b)(Frequency)	-	5000	20% Discount to BIS
3.4, Table-2, i) a)(Input voltage range)	-	5000	20% Discount to BIS
3.1, Table-1, ii) a)(Demodulation and FEC decoding)	-	5000	20% Discount to BIS
3.1, Table-1, ii) b)(DTV Receiver Installation)	-	5000	20% Discount to BIS
3.1, Table-1, ii) c)(Network evolution)	-	5000	20% Discount to BIS
3.4, Table-2, iii) c)(RF input impedance)	-	5000	20% Discount to BIS
3.1, Table-1, ii) d)(Services available)	-	5000	20% Discount to BIS
3.1, Table-1, ii) e)(Selection via Service List)	-	5000	20% Discount to BIS
3.1, Table-1, ii) f)(Selection via Numeric Entry)	-	5000	20% Discount to BIS
3.1, Table-1, ii) g)(Favourite Channel list)	-	5000	20% Discount to BIS
3.1, Table-1, ii) h)(Hidden Services)	-	5000	20% Discount to BIS
3.4, Table-2, iii) b)(Input frequency range)	-	5000	20% Discount to BIS
3.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	5000	20% Discount to BIS
3.1, Table-1, ii) k)(RF input signal)	-	5000	20% Discount to BIS
3.1, Table-1, ii) m)(LNB supply current)	-	5000	20% Discount to BIS
3.1, Table-1, ii) n)(LNB supply voltage)	-	5000	20% Discount to BIS
3.1, Table-1, ii) p)(LNB Control)	-	5000	20% Discount to BIS
3.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	5000	20% Discount to BIS
3.4, Table-2, iii) a)(Input level per carrier)	-	5000	20% Discount to BIS
3.4, Table-2, iv) c)(RF input impedance)	-	5000	20% Discount to BIS
3.4, Table-2, iv) b)(Input frequency range)	-	5000	20% Discount to BIS
3.4, Table-2, iv) a)(Input level per carrier)	-	5000	20% Discount to BIS
3.4, Table-2, v)(Symbol rate)	-	5000	20% Discount to BIS
3.4, Table-2, vi)(RF input return loss)	-	5000	20% Discount to BIS
3.4, Table-2, vii)(DisEqC)	-	5000	20% Discount to BIS
3.4, Table-2, viii)(Operating ambient temperature range)	-	5000	20% Discount to BIS
3.4, Table-2, ix)(Operating humidity range)	-	5000	20% Discount to BIS
3.4, Table-2, x)(Power consumption)	-	5000	20% Discount to BIS
3.1, Table-1, iii) a)(Interfaces, Connectors)	-	5000	20% Discount to BIS
3.1, Table-1, iv)(Automatic software upgrade mechanism)	-	5000	20% Discount to BIS
3.1, Table-1, v) a)(Remote Control)	-	5000	20% Discount to BIS
3.1, Table-1, v) b)(Easy to use and simple documentation)	-	5000	20% Discount to BIS
3.1, Table-1, v) c)(Support package)	-	5000	20% Discount to BIS

15 Oct, 2027

-
Included w.e.f 20.02.2025 Exclusion : Cl 3.6 Electromagnetic Compatibility(EMC) Requirements, Cl 3.1 Table 1(i)(p) OSD

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	500	20% Discount to BIS
6(Classification- IS 302-1)	-	500	20% Discount to BIS
7.1(Marking- IS 302-1)	-	500	20% Discount to BIS
7.1(Marking- IS 302-1)	-	500	20% Discount to BIS
7.1(Marking- IS 302-1)	-	500	20% Discount to BIS
7.1(Marking- IS 302-1)	-	500	20% Discount to BIS
7.1(Marking- IS 302-1)	-	500	20% Discount to BIS
7.1(Marking- IS 302-1)	-	500	20% Discount to BIS
7.1(Marking- IS 302-1)	-	500	20% Discount to BIS
7.1(Marking- IS 302-1)	-	500	20% Discount to BIS
7.1(Marking- IS 302-1)	-	500	20% Discount to BIS
7.3(Marking- IS 302-1)	-	500	20% Discount to BIS
7.4(Marking- IS 302-1)	-	500	20% Discount to BIS
7.6(Marking- IS 302-1)	-	500	20% Discount to BIS
7.11(Marking- IS 302-1)	-	500	20% Discount to BIS
7.12(Marking- IS 302-1)	-	500	20% Discount to BIS
7.13(Marking- IS 302-1)	-	500	20% Discount to BIS
7.14(Marking- IS 302-1)	-	500	20% Discount to BIS
7.15(Marking- IS 302-1)	-	500	20% Discount to BIS
7.101(Marking)	-	500	20% Discount to BIS
8( Protection Against Electric Shock, IS 302-1)	-	1000	20% Discount to BIS
10(Power Input and Current, IS 302-1)	-	1000	20% Discount to BIS
11(Heating, IS 302-1)	-	1000	20% Discount to BIS
11(Heating, IS 302-1)	-	1000	20% Discount to BIS
11(Heating, IS 302-1)	-	1000	20% Discount to BIS
11(Heating, IS 302-1)	-	1000	20% Discount to BIS
11(Heating, IS 302-1)	-	1000	20% Discount to BIS
11(Heating, IS 302-1)	-	1000	20% Discount to BIS
11(Heating, IS 302-1)	-	1000	20% Discount to BIS
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	1000	20% Discount to BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	20% Discount to BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	20% Discount to BIS
15.1(Moisture Resistance, IS 302-1)	-	1000	20% Discount to BIS
15.3(Moisture Resistance, IS 302-1)	-	1000	20% Discount to BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	20% Discount to BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	20% Discount to BIS
19.2(Abnormal Operation, IS 302-1)	-	800	20% Discount to BIS
19.2(Abnormal Operation, IS 302-1)	-	800	20% Discount to BIS
19.3(Abnormal Operation, IS 302-1)	-	800	20% Discount to BIS
19.3(Abnormal Operation, IS 302-1)	-	800	20% Discount to BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	800	20% Discount to BIS
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	1000	20% Discount to BIS
22(Construction, IS 302-1)	-	1000	20% Discount to BIS
22.101(Construction)	-	1000	20% Discount to BIS
22.102(Construction)	-	1000	20% Discount to BIS
22.103(Construction)	-	1000	20% Discount to BIS
22.104(Construction)	-	1000	20% Discount to BIS
22.105(Construction)	-	1000	20% Discount to BIS
22.105.1(Construction)	-	1000	20% Discount to BIS
22.105.2(Construction)	-	1000	20% Discount to BIS
22.106(Construction)	-	1000	20% Discount to BIS
22.107(Construction)	-	1000	20% Discount to BIS
11.107.1(Construction)	-	1000	20% Discount to BIS
23.1(Internal Wiring, IS 302-1)	-	500	20% Discount to BIS
23.2(Internal Wiring, IS 302-1)	-	500	20% Discount to BIS
23.8(Internal Wiring, IS 302-1)	-	500	20% Discount to BIS
23.9(Internal Wiring, IS 302-1)	-	500	20% Discount to BIS
23.10(Internal Wiring, IS 302-1)	-	500	20% Discount to BIS
24.1(Components, IS 302-1)	-	1000	20% Discount to BIS
24.2(Components, IS 302-1)	-	1000	20% Discount to BIS
24.101(Components)	-	1000	20% Discount to BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
25.4(Supply Connection and External Flexible Cords)	-	1000	20% Discount to BIS
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	20% Discount to BIS
26(Terminals for External Conductors, IS 302-1)	-	500	20% Discount to BIS
27.1(Provision for Earthing, IS 302-1)	-	1000	20% Discount to BIS
27.2(Provision for Earthing, IS 302-1)	-	1000	20% Discount to BIS
27.3(Provision for Earthing, IS 302-1)	-	1000	20% Discount to BIS
27.4(Provision for Earthing, IS 302-1)	-	1000	20% Discount to BIS
27.5(Provision for Earthing, IS 302-1)	-	1000	20% Discount to BIS
28(Screws & Connections, IS 302-1)	-	500	20% Discount to BIS
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	20% Discount to BIS
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	20% Discount to BIS
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	20% Discount to BIS
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	1000	20% Discount to BIS
31(Resistance of Rusting, IS 302-1)	-	1000	20% Discount to BIS
19.11.4.7(Harmonics)	-	1000	20% Discount to BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1000	20% Discount to BIS
19.11.4.4(Surge immunity test)	-	1000	20% Discount to BIS
19.11.4.3(Fast transient bursts)	-	1000	20% Discount to BIS
19.11.4.1(Electrostatic discharges)	-	1000	20% Discount to BIS

15 Oct, 2027

-
Included w.e.f.12.12.2024 Exclusion 19.11.4.2 (Radiated fields) 19.11.4.5 (Immunity to conducted discharges)

IS 302 : Part 2 : Sec 206 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 206 electric coffee makers

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation hazards)	-	1000	20% Discount to BIS
31(Resistance to Rusting)	-	1000	20% Discount to BIS
30(Resistance to Heat, Fire and Tracking)	-	1000	20% Discount to BIS
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	20% Discount to BIS
28(Screws & Connection)	-	1000	20% Discount to BIS
27(Provision For Earthing)	-	1000	20% Discount to BIS
26(Terminals For External Conductors)	-	1000	20% Discount to BIS
25(Supply Connection & External Flexible Cables and Cords)	-	1000	20% Discount to BIS
24(Component)	-	500	20% Discount to BIS
23(Internal wiring)	-	1000	20% Discount to BIS
22(Construction)	-	1000	20% Discount to BIS
21(Mechanical strength)	-	1000	20% Discount to BIS
20(Stability & Mechanical Hazards)	-	1000	20% Discount to BIS
19(Abnormal Operation)	-	1000	20% Discount to BIS
18(Endurance)	-	1000	20% Discount to BIS
17(Overload Protection)	-	1000	20% Discount to BIS
16(Insulation resistance and Electric Strength (After humidity treatment))	-	1000	20% Discount to BIS
15(Moisture Resistance)	-	1000	20% Discount to BIS
14(Radio and television interference suppression/ Transient Overvoltages)	-	1000	20% Discount to BIS
13(Electrical insulation and Leakage Current at Operating Temperature)	-	1000	20% Discount to BIS
12(Operation under overload conditions of appliances with heating elements)	-	1000	20% Discount to BIS
11(Temperature Rise/Heating)	-	1000	20% Discount to BIS
10(Input)	-	1000	20% Discount to BIS
9(Starting Of Motor Operated Appliances)	-	1000	20% Discount to BIS
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	20% Discount to BIS
7(Marking/ Marking & Instructions)	-	500	20% Discount to BIS
6(Classification)	-	500	20% Discount to BIS
5(Rating)	-	500	20% Discount to BIS
19.11.4.1(Electrostatic discharges)	-	1500	20% Discount to BIS
19.11.4.3(Fast transient bursts)	-	1500	20% Discount to BIS
19.11.4.4(Surge immunity test)	-	1500	20% Discount to BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1500	20% Discount to BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	1500	20% Discount to BIS
19.11.4.7(Harmonics)	-	1500	20% Discount to BIS

15 Oct, 2027

-
Included w.e.f.12.12.2024 Exclusion Cl 19.11.4.2 (Radiated fields) CL 19.11.4.5 (Immunity to conducted discharges)

IS 302 : Part 2 : Sec 4 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 4 spin extractors

60000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3(GENERAL REQUIREMENTS)	-	1000	20% Discount to BIS
4(GENERAL NOTES ON TESTS)	-	1000	20% Discount to BIS
5(RATING)	-	1000	20% Discount to BIS
6(CLASSIFICATION)	-	1000	20% Discount to BIS
7(MARKING)	-	1000	20% Discount to BIS
8(PROTECTION AGAINST ELECTRIC SHOCK)	-	2000	20% Discount to BIS
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	2000	20% Discount to BIS
10(INPUT AND CURRENT)	-	2000	20% Discount to BIS
11(HEATING)	-	2000	20% Discount to BIS
13(ELECTRICAL INSULATION AND LEAKAGE CURRENT AT OPERATING TEMPERATURE)	-	2000	20% Discount to BIS
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	2000	20% Discount to BIS
15(MOISTURE RESISTANCE)	-	2000	20% Discount to BIS
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH (AFTER HUMIDITY TREATMENT))	-	2000	20% Discount to BIS
17(OVERLOAD PROTECTION)	-	2000	20% Discount to BIS
19(ABNORMAL OPERATION)	-	2000	20% Discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	2000	20% Discount to BIS
21(MECHANICAL STRENGTH)	-	2000	20% Discount to BIS
22(CONSTRUCTION)	-	2000	20% Discount to BIS
23(INTERNAL WIRING)	-	2000	20% Discount to BIS
24(COMPONENTS)	-	2000	20% Discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	2000	20% Discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	2000	20% Discount to BIS
27(PROVISION FOR EARTHING)	-	2000	20% Discount to BIS
28(SCREWS AND CONNECTIONS)	-	2000	20% Discount to BIS
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	2000	20% Discount to BIS
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	2000	20% Discount to BIS
31(RESISTANCE TO RUSTING)	-	2000	20% Discount to BIS
19.11.4.1(Electrostatic discharges)	-	2000	20% Discount to BIS
19.11.4.3(Fast transient bursts)	-	2000	20% Discount to BIS
19.11.4.4(Surge immunity test)	-	2000	20% Discount to BIS
19.11.4.6(Class 3 Voltage dips and interruptions)	-	2000	20% Discount to BIS
19.11.4.7(Harmonics)	-	2000	20% Discount to BIS

15 Oct, 2027

-
Included w.e.f.12.12.2024 Exclusion Cl 19.11.4.2 (Radiated fields) CL 19.11.4.5 (Immunity to conducted discharges)

Bureau of Indian Standards

The National Standards Body of India

Classic Testing & Research Centre (B17), Noida

B-17, Sector-65, Noida, Gautam Buddha Nagar, Uttar Pradesh, 201301

7982333919 cbcd@classiclabindia.com

Scope List