BIS - LIMS (Laboratory Information Management System)

RAHUL ENGINEERS LABORATORY PRIVATE LIMITED

5A-CHITRAKUT NAGAR, Udaipur, Udaipur, Rajasthan, 313001

8107343935 rahul.labudr@gmail.com

Scope List

Reset

3 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 1489 : Part 2 (2015)

Portland - Pozzolana cement - Specification: Part 2 calcined clay based

POZZOLANA PORTLAND CEMENT - CALCINED CLAY BASED

21100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	600	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	600	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	600	-
7 -Table 2- i(Fineness 4031 Part 2)	-	2400	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1500	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	1500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	2400	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	2400	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	2400	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	700	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	700	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	4000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	600	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	600	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	600	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	600	-
7 -Table 2- i(Fineness 4031 Part 2)	-	2400	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1500	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	1500	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	2400	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	2400	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	700	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	700	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	4000	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	-
Clause 7 Table 2 SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	4000	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	600	-

27 Oct, 2028

-
Clause 7 Table 2 SI No. (v) (Transverse Strength, 672 ± 4 h) Clause 7Table 2 SI No. (v) (Transverse Strength, 168 ± 2 h) Clause 7Table 2 SI No. (v) (Transverse Strength, 72 ± 1 h)

IS 1489 (Part 1) (2015)

Portland pozzolana cement - Specification: Part 1 fly Ash Based

PORTLAND POZZOLANA CEMENT - FLY ASH BASED

21100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	700	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	700	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	2400	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	2400	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	1500	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1500	-
7 -Table 2- i(Fineness 4031 Part 2)	-	2400	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	600	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	600	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	600	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	600	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	600	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	600	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	600	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	600	-
7 -Table 2- vi(Drying Shrinkage- IS 4031 Part 10)	-	1000	-
7 -Table 2- iv- c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 -Table 2- iv- b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 -Table 2- iv- a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 -Table 2-iii- b(Setting Time Final- 4031 Part 5)	-	700	-
7 -Table 2- iii- a(Setting Time Initial- 4031 Part 5)	-	700	-
7 -Table 2- ii- b(Expansion after aeration- 4031 Part 3)	-	2400	-
7 -Table 2- ii- b(Expansion by Autoclave- 4031 Part 3)	-	2400	-
7 -Table 2- ii- a(Expansion after aeration - 4031 Part 3)	-	1500	-
7 -Table 2- ii- a(Expansion by Le Chatelier- 4031 Part 3)	-	1500	-
7 -Table 2- i(Fineness 4031 Part 2)	-	2400	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	600	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	600	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	600	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	600	-
6 - Table - 1 vi( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	600	-
6 - Table - 1 v(Chloride content - Cl 4.13 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Loss on ignition - Cl 7.1 of IS 4032:1985)	-	600	-
6 - Table - 1 iii(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 7.3 of IS 4032:1985)	-	600	-
6 - Table - 1 i(Insoluble residue - Cl 7.4 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Magnesia - Cl 7.2 of IS 4032:1985)	-	600	-
7 -Table 2- v(Transverse Strength - IS 4031 Part 8 (Optional))	-	4000	-

27 Oct, 2028

-
Clause 7 Table 2 SI No. (v) (Transverse Strength, 672 ± 4 h) Clause 7Table 2 SI No. (v) (Transverse Strength, 168 ± 2 h) Clause 7Table 2 SI No. (v) (Transverse Strength, 72 ± 1 h)

IS 269 (2015)

Ordinary portland cement - Specification (Sixth Revision)

ORDINARY PORTLAND CEMENT

21100 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	4000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iii b(Setting Time Final)	-	700	-
7 Table-3 iii a(Setting Time Initial)	-	700	-
7 Table-3 ii b(Expansion after aeration)	-	2400	-
7 Table-3 ii b(Expansion by Autoclave)	-	2400	-
7 Table-3 ii a(Expansion after aeration)	-	1500	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1500	-
7 Table-3 i.(Fineness)	-	2400	-
6.1 Table-2 viii(Alkali content)	-	600	-
6.1 Table-2 vii(Chloride content)	-	600	-
6.1 Table-2 vi(Loss on ignition)	-	600	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	-
6.1 Table-2 iv(Magnesia)	-	600	-
6.1 Table-2 iii.(Insoluble residue)	-	600	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	600	-
6 - Table - 1 viii(Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	600	-
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	600	-
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	600	-
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	600	-
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	600	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	600	-
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	4000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iii b(Setting Time Final)	-	700	-
7 Table-3 iii a(Setting Time Initial)	-	700	-
7 Table-3 ii b(Expansion after aeration)	-	2400	-
7 Table-3 ii b(Expansion by Autoclave)	-	2400	-
7 Table-3 ii a(Expansion after aeration)	-	1500	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1500	-
7 Table-3 i.(Fineness)	-	2400	-
6.1 Table-2 viii(Alkali content)	-	600	-
6.1 Table-2 vii(Chloride content)	-	600	-
6.1 Table-2 vi(Loss on ignition)	-	600	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	-
6.1 Table-2 iv(Magnesia)	-	600	-
6.1 Table-2 iii.(Insoluble residue)	-	600	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	600	-
6 - Table - 1 viii( Alkali content as (Na2O + 0.658 K2O) - Cl 4.11 of IS 4032:1985)	-	600	-
6 - Table - 1 vii(Chloride content - Cl 4.13 of IS 4032:1985)	-	600	-
6 - Table - 1 vi(Loss on ignition - Cl 4.2 of IS 4032:1985)	-	600	-
6 - Table - 1 v(Total Sulphur Content calculated as Sulphuric Anhydride (SO3) - Cl 4.9 of IS 4032:1985)	-	600	-
6 - Table - 1 iv(Magnesia - Cl 4.8 of IS 4032:1985)	-	600	-
6 - Table - 1 iii(Insoluble residue - Cl 4.10 of IS 4032:1985)	-	600	-
6 - Table - 1 ii(Ratio of percentage of alumina to that of iron oxide - Cl 4 of IS 4032:1985)	-	600	-
6 - Table - 1 i(Ratio of percentage of lime to percentages of silica, alumina and iron oxide - Cl 4 of IS 4032:1985)	-	600	-
7.1.8(Pump efficiency shall be as per 11.4)	-	5000	-
Clause 7 Table 3, SI No. (v) (Compressive strength of Transverse Specimen, 672 ± 4 h)	-	1100	-
Clause 7 Table 3, SI No. (v) (Compressive strength of Transverse Specimen, 168 ± 2 h)	-	4000	-
Clause 7 Table 3, SI No. (v) (Compressive strength of Transverse Specimen, 72 ± 1 h)	-	4000	-
Clause 7 Table 3, SI No. (v) (Transverse Strength, 672 ± 4 h)	-	4000	-
Clause 7 Table 3, SI No. (v) (Transverse Strength, 168 ± 2 h)	-	4000	-
Clause 7 Table 3, SI No. (v) (Transverse Strength, 72 ± 1 h)	-	4000	-
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	4000	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iii b(Setting Time Final)	-	700	-
7 Table-3 iii a(Setting Time Initial)	-	700	-
7 Table-3 ii b(Expansion after aeration)	-	2400	-
7 Table-3 ii b(Expansion by Autoclave)	-	2400	-
7 Table-3 ii a(Expansion after aeration)	-	1500	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1500	-
7 Table-3 i.(Fineness)	-	2400	-
6.1 Table-2 viii(Alkali content)	-	600	-
6.1 Table-2 vii(Chloride content)	-	600	-
6.1 Table-2 vi(Loss on ignition)	-	600	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	-
6.1 Table-2 iv(Magnesia)	-	600	-
6.1 Table-2 iii.(Insoluble residue)	-	600	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	600	-
6.1 Table-2 i.(Ratio of percentage of lime to percentage of silica, alumina and iron oxide)	-	600	-
6.1 Table-2 ii.(Ratio of percentage of alumina to that of iron oxide)	-	600	-
6.1 Table-2 iii.(Insoluble residue)	-	600	-
6.1 Table-2 iv(Magnesia)	-	600	-
6.1 Table-2 v(Total Sulphur Content calculated as Sulphuric Anhydride)	-	600	-
6.1 Table-2 vi(Loss on ignition)	-	600	-
6.1 Table-2 vii(Chloride content)	-	600	-
7 Table-3 i.(Fineness)	-	2400	-
7 Table-3 ii a(Expansion by Le Chatelier)	-	1500	-
7 Table-3 ii a(Expansion after aeration)	-	1500	-
7 Table-3 ii b(Expansion by Autoclave)	-	2400	-
7 Table-3 ii b(Expansion after aeration)	-	2400	-
7 Table-3 iii a(Setting Time Initial)	-	700	-
7 Table-3 iii b(Setting Time Final)	-	700	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv a(Compressive Strength At 72 hrs ± 1 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv b(Compressive Strength At 168 hrs ± 2 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 iv c(Compressive Strength At 672 hrs ± 4 hr - IS 4031 Part 6)	-	1100	-
7 Table-3 v(Transverse Strength - IS 4031 Part 8 (Optional))	-	1100	-

27 Oct, 2028

-
Clause 7 Table 3, SI No. (v) (Transverse Strength, 168 ± 2 h) Clause 7 Table 3, SI No. (v) (Transverse Strength, 672 ± 4 h) Clause 7 Table 3, SI No. (v) (Transverse Strength, 72 ± 1 h)

Bureau of Indian Standards

The National Standards Body of India

RAHUL ENGINEERS LABORATORY PRIVATE LIMITED

5A-CHITRAKUT NAGAR, Udaipur, Udaipur, Rajasthan, 313001

8107343935 rahul.labudr@gmail.com

Scope List