BIS - LIMS (Laboratory Information Management System)

MSME TESTING STATION, HYDERABAD

A-1, Industrial Estate,Sanathnagar,Hyderabad-500018, Hyderabad, Hyderabad, Telangana, 500018

8971423923 dcts-hyd@dcmsme.gov.in

Scope List

Reset

1 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 1786 (2008)

High strength deformed steel bars and wires for concretere inforcement - Specification (Fourth Revision)

Grade: Fe 415,to 600D, Sizes: up to and including 25mm

14500 View breakup
-

Clause No.	Exclusion	Remark
Cl 9.4(Load In Other Direction From Bend)	-	-
Cl 9.3(Load In One Direction)	-	-
Cl 7.2(Weight)	-	-
Cl 6.1(Length, Width & Thickness)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-
Cl 9.3(Load In One Direction)	-	-
Cl 7.2(Weight)	-	-
Cl 6.1(Length, Width & Thickness)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-
Cl 9.3(Load In One Direction)	-	-
Cl 8.1(UTM)	-	-
Cl 7.2(Weight)	-	-
Cl 6.1(Length, Width & Thickness)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON +EQUIVELENT )	-	-
4.1(Sulphur and phosphorous)	-	-
4.1(CE)	-	-
4.1(Ni)	-	-
4.1(Mo)	-	-
4.1(Cr)	-	-
4.1( Ti)	-	-
4.1(V)	-	-
4.1( Nb)	-	-
4.1( Aluminium %)	-	-
4.1( Copper %)	-	-
4.1(Silicon %)	-	-
4.1(Sulphur %)	-	-
4.1(Phosphorus %)	-	-
4.1(Manganese %)	-	-
4.1(Carbon %)	-	-
Cl.9.4 & Cl. 9.4.1(Rebend test)	-	-
Cl. 9.3, Table 4(Bend Test )	-	-
Cl. 8.1 Table 3(Elongation, percentage)	-	-
Cl. 8.1 Table 3(TS/YS ratio)	-	-
Cl. 8.1 Table 3(Tensile Strength (TS))	-	-
Cl. 8.1 Table 3(Yield Stress (YS))	-	-
Cl. 7.2 Table -2 (Nominal Mass)	-	-
Cl. 6.1(Nominal Size)	-	-
Cl. 5 (Cl. 5 - Mean projected area of transverse ribs (1/3 of Ar))	-	-
Cl. 5 (Cl.5 Mean area of ribs/unit length (Ar), )	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR+PHOSPHUR)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 MANGANESE)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 NITROGEN)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 PHOSPHURS)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 SULPHUR)	-	-
Clause - 4.2 & 4.2.1(Fe- 415, Fe- 415D, Fe-500, Fe-500D, Fe-550, Fe-550D, Fe-600 CARBON )	-	-
Cl.4.2 of IS 1786 (Vanadium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Molybdenum- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Chromium- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Nickel- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Copper- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Nitrogen- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Manganese- IS 228 and relevant parts or any other established Instrumental/Chemical method.)	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415D,Fe 415S, Fe 500D,Fe 500S,Fe 550D)(Carbon Equivalent)	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur & Phosphorous)	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Phosphorous- IS 228)	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Sulphur-IS 228)	-	-
Cl.4.2 of IS 1786 (Grade:- Fe 415,Fe 415D,Fe 415S,Fe 500,Fe 500D,Fe 500S,Fe 550,Fe 550D,Fe600,Fe 650,Fe 700)(Carbon-IS 228)	-	-
8.18.1 Table 3(Total elongation at maximum force)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
4.2(Niobium (Nb))	-	-
4.2(Boron (B))	-	-
Cl. 8.1 Table 3(TS/YS Ratio)	-	-
Cl. 5.3 (b)(The ribs contributing the projected area - Transverse Ribs)	-	-
Cl. 5.3 (a)(The ribs contributing the projected area - Longitudinal Ribs)	-	-
Cl. 8.1 Table 3(Maximum Extension)	-	-
Cl. 8.1 Table 3(Total Elongation at Maximum Force)	-	-
Cl. 6.2, 6.3 Table 1(Gross Cross Sectional Area, A)	-	-
Cl. 4.3(Visual Inspection.)	-	-
Cl. 5.2(Surface Characteristics)	-	-
Clause 9.4(Rebend Test)	-	-
Clause 6.3(Effective Cross-sectional Area)	-	-
Clause 8.1(Table 3)(Total Elongation at Maximum Force)	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-
Cl 9.3(Load In One Direction)	-	-
Cl 8.1(UTM)	-	-
Cl 7.2(Weight)	-	-
Cl 6.1(Length, Width & Thickness)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
Cl 5(Deformations and Surface Characteristics)	-	-
Cl 6.1(Length, Width & Thickness)	-	-
Cl 7.2(Weight)	-	-
Cl 8.1(UTM)	-	-
Cl 9.3(Load In One Direction)	-	-
Cl 9.4(Load In Other Direction From Bend)	-	-
7.0 & 7.1(Specified lengths - SOP MT-23)	-	-
8.0 & 8.1("Total elongation at maximum force on 5.65 vSo mm GL. ")	-	-
4.3(Rolling and cold working of bars/wire)	-	-
7.1(Specified length)	-	-
9.1(Preparation of test sample)	-	-
9.2(Tensile test,IS:1608(Pt1)-2018)	-	-
9.5(Retest)	-	-
Clause 4.2 Note 2, Amendment 1 & 3(Nb+V+B+Ti)	-	-
Clause 4.2 Note 3, Amendment 1 & 3(Cr+Cu+Ni+Mo+P)	-	-
Clause 4.2, Amendment 3 Note 4("In order to ascertain whether sufficient quantities of nitrogen binding elements are present, following formula may be used, where all elements are in ppm. (N−120)< (Al free/10)+((Ti+V)/7)+(Nb/14)")	-	-
4.1( Nitrogen%)	-	-
13(Identification and marking)	-	-
12(Inspection)	-	-
1()	-	-

Complete

17 Oct, 2024

17 Oct, 2027

Excluding Pull-Out Test.

Bureau of Indian Standards

The National Standards Body of India

MSME TESTING STATION, HYDERABAD

A-1, Industrial Estate,Sanathnagar,Hyderabad-500018, Hyderabad, Hyderabad, Telangana, 500018

8971423923 dcts-hyd@dcmsme.gov.in

Scope List