BIS - LIMS (Laboratory Information Management System)

NATIONAL TESTING BUREAU, GHAZIABAD

KHASRA NO- 883, OPP GALI NO. 9, MAMRAJ NAGAR, SIHANI ROAD,, GHAZIABAD, Ghaziabad, Uttar Pradesh, 201001

7669008004 ntbureau.gzb@yahoo.com

Scope List

Reset

21 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 4246 (2025)

DOMESTIC GAS STOVE AND BUILT IN HOB FOR USE WITH LPG SPECIFICATION (Sixth Revision )

All

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1(General - IS 4246 : 2025)	-	500	-
4.1(General - IS 4246 : 2025)	-	500	-
4.1.1(General - IS 4246 : 2025)	-	500	-
5(Materials - Cl. 5 of IS 5116)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1.1(Materials - Toughened glass, if provided,)	-	1000	-
5.1(Materials - IS 5116)	-	1000	-
5.1(Materials - IS 5116)	-	1000	-
5.1.1(Materials - IS 5116)	-	1000	-
5.1.1(Materials - IS 5116)	-	1000	-
5.2(Materials - IS 5116)	-	1000	-
5.2(Materials - IS 5116)	-	1000	-
5.3(Materials - IS 5116)	-	1000	-
5.5(Materials - IS 5116)	-	1000	-
5.5(Materials - IS 5116)	-	1000	-
5.5(Materials - IS 5116)	-	1000	-
5.7(Materials - IS 5116)	-	1000	-
6.1(Design for Maintainance)	-	500	-
6.1(Design for Maintainance)	-	500	-
6.2(Design for Maintainance)	-	500	-
6.2(Design for Maintainance)	-	500	-
6.3(Design for Maintainance)	-	500	-
6.4(Design for Maintainance)	-	500	-
6.5(Design for Maintainance)	-	500	-
6.6(Design for Maintainance)	-	500	-
7.0(Rigidity and Stability)	-	500	-
7.1(Rigidity and Stability)	-	500	-
7.2(Rigidity and Stability)	-	500	-
7.3(Rigidity and Stability)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.1(Workmanship and Finish - Cl. 7 of IS 5116)	-	500	-
8.2(Workmanship and Finish -)	-	500	-
8.3(Workmanship and Finish -)	-	500	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
9(Gas Taps- Cl. 8 of IS 5116 (Except 8.7 and 8.11.1))	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
10(Injector Jets)	-	1000	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.1(Burners- Cl. 10 of IS 5116)	-	500	-
11.2(Burners)	-	500	-
11.3(Burners)	-	500	-
11.4(Burners)	-	500	-
12.1(Burner Pan Support)	-	500	-
12.2(Burner Pan Support)	-	500	-
12.3(Burner Pan Support)	-	500	-
13.1(Gas Soundness Test - Cl. 16 of IS 5116)	-	1000	-
13,2(Gas Soundness Test)	-	1000	-
13.2(Gas Leak Detector)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.1(Gas Inlet Connection - Cl. 18 of IS 5116)	-	1000	-
14.2(Gas Inlet Connection)	-	1000	-
14.2(Gas Inlet Connection)	-	1000	-
14.2(Gas Inlet Connection)	-	1000	-
14.2(Gas Inlet Connection)	-	1000	-
14.3(Gas Inlet Connection)	-	1000	-
14.4(Gas Inlet Connection)	-	1000	-
14.5(Gas Inlet Connection - Cl. 17.3 of IS 5116)	-	1000	-
14.6(Gas Inlet Connection)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
15.0(Strength and Rigidity)	-	1000	-
17.0(Gas Consumption Test)	-	2000	-
17.0(Gas Consumption Test)	-	2000	-
17.0(Gas Consumption Test)	-	2000	-
17.0(Gas Consumption Test)	-	2000	-
17.0(Gas Consumption Test)	-	2000	-
17.0(Gas Consumption Test)	-	2000	-
17.2(Gas Consumption Test - For Gas Stoves)	-	2000	-
17.2 (a)(Gas Consumption Test - For Gas Stoves)	-	2000	-
17.2 (b)(Gas Consumption Test - For Gas Stoves)	-	2000	-
17.2 (c)(Gas Consumption Test - For Gas Stoves)	-	2000	-
17.3(Gas Consumption Test - For Built in Hobs)	-	2500	-
17.3.1(Gas Consumption Test - For Built in Hobs)	-	2500	-
17.3.2(Gas Consumption Test - For Built in Hobs)	-	2500	-
18.1(Ignition and Flame Travel)	-	1000	-
18.1(Ignition and Flame Travel)	-	1000	-
18.2(Ignition and Flame Travel)	-	1000	-
18.3(Ignition and Flame Travel)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
18.4(Ignition and Flame Travel - Cl. 14 of IS 5116)	-	1000	-
19.1(Flame Stability)	-	1000	-
19.1.1(Flame Stability)	-	1000	-
19.2(Flame Stability)	-	1000	-
19.3(Flame Stability)	-	1000	-
20(Noise Control)	-	1000	-
21(Flash Back)	-	1000	-
22(Formation of Soot)	-	1000	-
23(Resistance to Draught)	-	1000	-
24.1(Combustion)	-	1000	-
24.1(Combustion)	-	1000	-
24.2(Combustion)	-	1000	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.1(Fire Hazard and Limiting Temperatures)	-	2000	-
25.2(Fire Hazard and Limiting Temperatures)	-	2000	-
26.1(Thermal Efficiency- Gas Stoves)	-	2500	-
26.1(Thermal Efficiency- Gas Stoves)	-	2500	-
26.1(Thermal Efficiency- Gas Stoves)	-	2500	-
26.1(Thermal Efficiency- Gas Stoves)	-	2500	-
26.1(Thermal Efficiency- Gas Stoves)	-	2500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2500	-
26.2(Thermal Efficiency- For Built in Hobs)	-	2500	-

10 Jul, 2028

-
Included w.e.f. 29.10.2025

IS 302 : Part 2 : Sec 2 (1997)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 2 vacuum cleaners and water suction cleaning appliances

All

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Rating)	-	500	-
6(Classification)	-	500	-
7(Marking)	-	500	-
8(Protection against Access to Live Parts)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
10("Power Input & Current")	-	1000	-
11(Temperature Rise/ Heating)	-	1000	-
12(OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS)	-	0	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	-
14(RADIO AND TELEVISION INTERFERENCE SUPPRESSION)	-	2000	-
15(MOISTURE RESISTANCE)	-	500	-
16(INSULATION RESISTANCE AND ELECTRIC STRENGTH ( AFTER HUMIDITY TREATMENT ))	-	1000	-
17(OVERLOAD PROTECTION)	-	0	-
19(ABNORMAL OPERATION)	-	500	-
20(STABILITY AND MECHANICAL HAZARDS)	-	500	-
21(MECHANICAL STRENGTH)	-	500	-
22(Construction)	-	500	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	0	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS)	-	1000	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1000	-
27(PROVISION FOR EARTHING)	-	500	-
28(SCREWS AND CONNECTIONS)	-	500	-
29(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH INSULATION)	-	1000	-
30(RESISTANCE TO HEAT, FIRE AND TRACKING)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION HAZARDS)	-	0	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-

10 Jul, 2028

-
Included w.e.f 26.09.2025 Exclusion CL 32 (RADIATION HAZARDS), Cl 19.11.4.1 to 19.11.4.7 (EMI/EMC), Cl 24 (COMPONENTS)

IS 302 : Part 2 : Sec 13 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 13 Deep Fat Fryers, Frying Pans and Similar Appliances (First Revision)

All

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
13.1 &13.2(Leakage current test)	-	1000	-
13.1 &13.3(Electric strength test)	-	1000	-
14(Transient overvoltages)	-	2000	-
15(Moisture resistance)	-	500	-
15.3(Moisture resistance)	-	500	-
15.101(Moisture resistance)	-	500	-
16.1 &16.2(Leakage current test)	-	500	-
16.1 & 16.3(Electric strength test)	-	500	-
17(Overload protection of transformers and associated circuits)	-	1000	-
19.1 to 19.13, Table No. - 9(Abnormal operation)	-	1000	-
19.101 to to 19.102(Abnormal operation)	-	1000	-
20(Stability and mechanical hazards)	-	1000	-
21(Mechanical strength)	-	500	-
22(Construction)	-	500	-
22.101(Construction)	-	500	-
23(Internal wiring)	-	1000	-
24(Components)	-	0	-
25("Supply connection and external flexible cords")	-	1000	-
26("Terminals for external conductors")	-	1000	-
27(Provision for earthing)	-	500	-
28(Screws and connections)	-	500	-
29("Clearances, creepage distances and solid insulation")	-	1000	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1000	-
32("Radiation, toxicity and similar hazards")	-	0	-
Cl.19.11.4.1(Electrostatic discharges)	-	0	-
Cl.19.11.4.2(Radiated fields)	-	0	-
Cl.19.11.4.3(Fast transient bursts)	-	0	-
Cl.19.11.4.4(Voltage surges)	-	0	-
Cl.19.11.4.5(Injected currents)	-	0	-
Cl.19.11.4.6(Class 3 voltage dips and interruptions)	-	0	-
Cl.19.11.4.7(mains signals)	-	0	-

10 Jul, 2028

-
Included w.e.f.28.08.2025 Exclusion "32 (""Radiation, toxicity and similar hazards"") 24 (Components) Cl.19.11.4.1 TO Cl.19.11.4.7" EMI/EMC

IS 302 : Part 2 : Sec 206 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 206 electric coffee makers

All

23000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
32(Radiation hazards)	-	0	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat, Fire and Tracking)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connection)	-	1000	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cables and Cords)	-	1000	-
24(Component)	-	0	-
23(Internal wiring)	-	500	-
22(Construction)	-	500	-
21(Mechanical strength)	-	500	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	0	-
17(Overload Protection)	-	0	-
16(Insulation resistance and Electric Strength (After humidity treatment))	-	1000	-
15(Moisture Resistance)	-	500	-
14(Radio and television interference suppression/ Transient Overvoltages)	-	2000	-
13(Electrical insulation and Leakage Current at Operating Temperature)	-	1000	-
12(Operation under overload conditions of appliances with heating elements)	-	1000	-
11(Temperature Rise/Heating)	-	1000	-
10(Input)	-	1000	-
9(Starting Of Motor Operated Appliances)	-	1000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	-
7(Marking/ Marking & Instructions)	-	500	-
6(Classification)	-	500	-
5(Rating)	-	500	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
32(Radiation hazards)	-	0	-
31(Resistance to Rusting)	-	500	-
30(Resistance to Heat, Fire and Tracking)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connection)	-	500	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cables and Cords)	-	1000	-
24(Component)	-	0	-
23(Internal wiring)	-	500	-
22(Construction)	-	1000	-
21(Mechanical strength)	-	500	-
20(Stability & Mechanical Hazards)	-	500	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	1000	-
17(Overload Protection)	-	0	-
16(Insulation resistance and Electric Strength (After humidity treatment))	-	1000	-
15(Moisture Resistance)	-	1000	-
14(Radio and television interference suppression/ Transient Overvoltages)	-	1000	-
13(Electrical insulation and Leakage Current at Operating Temperature)	-	1000	-
12(Operation under overload conditions of appliances with heating elements)	-	1000	-
11(Temperature Rise/Heating)	-	1000	-
10(Input)	-	500	-
9(Starting Of Motor Operated Appliances)	-	500	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	-
7(Marking/ Marking & Instructions)	-	500	-
6(Classification)	-	500	-
5(Rating)	-	500	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
32(Radiation hazards)	-	0	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat, Fire and Tracking)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connection)	-	500	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	1000	-
25(Supply Connection & External Flexible Cables and Cords)	-	1000	-
24(Component)	-	0	-
23(Internal wiring)	-	1000	-
22(Construction)	-	500	-
21(Mechanical strength)	-	500	-
20(Stability & Mechanical Hazards)	-	1000	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	1000	-
17(Overload Protection)	-	1000	-
16(Insulation resistance and Electric Strength (After humidity treatment))	-	1000	-
15(Moisture Resistance)	-	1000	-
14(Radio and television interference suppression/ Transient Overvoltages)	-	1000	-
13(Electrical insulation and Leakage Current at Operating Temperature)	-	1000	-
12(Operation under overload conditions of appliances with heating elements)	-	1000	-
11(Temperature Rise/Heating)	-	1000	-
10(Input)	-	500	-
9(Starting Of Motor Operated Appliances)	-	1000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	-
7(Marking/ Marking & Instructions)	-	500	-
6(Classification)	-	500	-
5(Rating)	-	500	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
32(Radiation hazards)	-	0	-
31(Resistance to Rusting)	-	1000	-
30(Resistance to Heat, Fire and Tracking)	-	1000	-
29(Clearances, Creepage Distances & Solid Insulation)	-	1000	-
28(Screws & Connection)	-	500	-
27(Provision For Earthing)	-	1000	-
26(Terminals For External Conductors)	-	500	-
25(Supply Connection & External Flexible Cables and Cords)	-	1000	-
24(Component)	-	0	-
23(Internal wiring)	-	1000	-
22(Construction)	-	500	-
21(Mechanical strength)	-	500	-
20(Stability & Mechanical Hazards)	-	500	-
19(Abnormal Operation)	-	1000	-
18(Endurance)	-	1000	-
17(Overload Protection)	-	1000	-
16(Insulation resistance and Electric Strength (After humidity treatment))	-	1000	-
15(Moisture Resistance)	-	1500	-
14(Radio and television interference suppression/ Transient Overvoltages)	-	2000	-
13(Electrical insulation and Leakage Current at Operating Temperature)	-	1000	-
12(Operation under overload conditions of appliances with heating elements)	-	1000	-
11(Temperature Rise/Heating)	-	1000	-
10(Input)	-	500	-
9(Starting Of Motor Operated Appliances)	-	1000	-
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	1000	-
7(Marking/ Marking & Instructions)	-	500	-
6(Classification)	-	500	-
5(Rating)	-	500	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-

10 Jul, 2028

-
Included w.e.f 25.09.2025 Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC), Cl 24 (Component), Cl 32 (Radiation hazards)

IS 302 : Part 2 : SEC 31 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods

All

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
Clause No - 5.18(linear and angular dimension)	-	500	-
Clause No - 6.2(harmfull ingress of water)	-	500	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	500	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	500	-
Clause No - 8.2(Addition)	-	500	-
Clause No - 10.1, Table No. -1(power input deviation)	-	500	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	1000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	1000	-
Clause No - 14(Impulse test voltage)	-	2000	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	1000	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	1000	-
Clause No -19.11.4.1(electrostatic discharge)	-	0	-
Clause No -19.11.4.2(radiated field)	-	0	-
Clause No -19.11.4.3(fast transient)	-	0	-
Clause No -19.11.4.4(Voltage dips and interruption)	-	0	-
Clause No -21.1(Mechanical strength)	-	500	-
Clause No -22.1(construction)	-	500	-
Clause No -22.11(push force applied)	-	500	-
Clause No -24.1.2(safety isolating transformer)	-	0	-
Clause No -24.1.3(for switches)	-	0	-
Clause No -24.1.4(for automatic control)	-	0	-
Clause No -24.1.5(for innterconnection couplers)	-	0	-
Clause No -24.4(plug and socket)	-	0	-
Clause No -25.8, Table no -11(conductor resistance)	-	1000	-
Clause No -25.5(dimension for pins)	-	500	-
Clause No -27.6(for circuit board)	-	1000	-
Clause No -29.2(comparative tracking index)	-	1000	-
Clause No -29.3.3(dry heat test)	-	1000	-
Clause No -30.2.1(glow wire test)	-	1500	-
Clause No -30.101("incorporate combustible material")	-	1000	-
15(MOISTURE RESISTANCE)	-	500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
18(ENDURANCE)	-	0	-
28(SCREWS AND CONNECTIONS)	-	500	-
31(RESISTANCE TO RUSTING)	-	1000	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
22(CONSTRUCTION)	-	1000	-
24(COMPONENTS)	-	0	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
11(Heating)	-	1000	-
Clause No - 5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
Clause No - 5.18(linear and angular dimension)	-	500	-
Clause No - 6.2(harmfull ingress of water)	-	500	-
Clause No - 8.1.1("PROTECTION AGAINST ACCESS TO LIVE PART- test probe B")	-	500	-
Clause No - 8.1.2("PROTECTION AGAINST ACCESS TO LIVE PART - test probe 13")	-	500	-
Clause No - 8.2(Addition)	-	500	-
Clause No - 10.1, Table No. -1(power input deviation)	-	500	-
Clause No - 13.3("LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE")	-	1000	-
Clause No - 13.3,Table No.- 4(voltage for electrical strength)	-	1000	-
Clause No - 14(Impulse test voltage)	-	2000	-
Clause No - 15.1.1(MOISTURE RESISTANCE)	-	500	-
Clause No -19.7(test is repeated with the capacitor short circuited)	-	500	-
Clause No -19.11.4.1(electrostatic discharge)	-	0	-
Clause No -19.11.4.2(radiated field)	-	0	-
Clause No -19.11.4.3(fast transient)	-	0	-
Clause No -19.11.4.4(Voltage dips and interruption)	-	0	-
Clause No -21.1(Mechanical strength)	-	500	-
Clause No -22.1(construction)	-	500	-
Clause No -22.11(push force applied)	-	500	-
Clause No -24.1.2(safety isolating transformer)	-	0	-
Clause No -24.1.3(for switches)	-	0	-
Clause No -24.1.4(for automatic control)	-	0	-
Clause No -24.1.5(for innterconnection couplers)	-	0	-
Clause No -24.4(plug and socket)	-	0	-
Clause No -25.8, Table no -11(conductor resistance)	-	500	-
Clause No -25.5(dimension for pins)	-	500	-
Clause No -27.6(for circuit board)	-	500	-
Clause No -29.2(comparative tracking index)	-	500	-
Clause No -29.3.3(dry heat test)	-	500	-
Clause No -30.2.1(glow wire test)	-	1500	-
Clause No -30.101("incorporate combustible material")	-	1000	-
15(MOISTURE RESISTANCE)	-	500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	0	-
18(ENDURANCE)	-	0	-
28(SCREWS AND CONNECTIONS)	-	500	-
31(RESISTANCE TO RUSTING)	-	1000	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
22(CONSTRUCTION)	-	1000	-
24(COMPONENTS)	-	0	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	0	-
11(Heating)	-	1000	-

10 Jul, 2028

-
Included w.e.f. 29.09.2025 Exclusion: "19.11.4.5 (Immunity to conducted discharges) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Harmonics) 32 (RADIATION, TOXICITY AND SIMILAR HAZARDS) Clause No -19.11.4.1 (electrostatic discharge) Clause No -19.11.4.2 (radiated field) Clause No -19.11.4.3 (fast transient) Clause No -19.11.4.4 (Voltage dips and interruption) Clause No -24.1.2 (safety isolating transformer) Clause No -24.1.3 (for switches) Clause No -24.1.4 (for automatic control) Clause No -24.1.5 (for innterconnection couplers) Clause No -24.4 (plug and socket)"

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

All

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	500	-
6(Classification- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	500	-
7.3(Marking- IS 302-1)	-	500	-
7.4(Marking- IS 302-1)	-	500	-
7.6(Marking- IS 302-1)	-	500	-
7.7(Marking- IS 302-1)	-	500	-
7.8(Marking- IS 302-1)	-	500	-
7.11(Marking- IS 302-1)	-	500	-
7.12(Marking- IS 302-1)	-	500	-
7.13(Marking- IS 302-1)	-	500	-
7.14(Marking- IS 302-1)	-	500	-
7.15(Marking- IS 302-1)	-	500	-
7.101(Marking)	-	500	-
8( Protection Against Electric Shock, IS 302-1)	-	500	-
10(Power Input and Current, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
14(Transient Over Voltages, IS 302-1)	-	2000	-
15.1(Moisture Resistance, IS 302-1)	-	1000	-
15.2(Moisture Resistance, IS 302-1)	-	1000	-
15(Moisture Resistance, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	1000	-
19.7(Abnormal Operation, IS 302-1)	-	500	-
19.8(Abnormal Operation, IS 302-1)	-	500	-
19.9(Abnormal Operation, IS 302-1)	-	500	-
19.1(Abnormal Operation, IS 302-1)	-	500	-
19.101(Abnormal Operation)	-	500	-
19.102(Abnormal Operation)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	500	-
20.101(Stability & Mechanical Hazards)	-	500	-
20.102(Stability & Mechanical Hazards)	-	500	-
20.103(Stability & Mechanical Hazards)	-	500	-
20.104(Stability & Mechanical Hazards)	-	500	-
20.105(Stability & Mechanical Hazards)	-	500	-
20.106(Stability & Mechanical Hazards)	-	500	-
20.107(Stability & Mechanical Hazards)	-	500	-
20.108(Stability & Mechanical Hazards)	-	500	-
20.109(Stability & Mechanical Hazards)	-	500	-
20.110(Stability & Mechanical Hazards)	-	500	-
20.111(Stability & Mechanical Hazards)	-	500	-
20.112(Stability & Mechanical Hazards)	-	500	-
20.113(Stability & Mechanical Hazards)	-	500	-
20.114(Stability & Mechanical Hazards)	-	500	-
20.115(Stability & Mechanical Hazards)	-	500	-
20.116(Stability & Mechanical Hazards)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
22(Construction, IS 302-1)	-	500	-
22.101(Construction)	-	500	-
22.102(Construction)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
23.2(Internal Wiring, IS 302-1)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
23.4(Internal Wiring, IS 302-1)	-	500	-
23.5(Internal Wiring, IS 302-1)	-	500	-
23.6(Internal Wiring, IS 302-1)	-	500	-
23.7(Internal Wiring, IS 302-1)	-	500	-
23.8(Internal Wiring, IS 302-1)	-	500	-
23.9(Internal Wiring, IS 302-1)	-	500	-
23.10(Internal Wiring, IS 302-1)	-	500	-
24.1(Components, IS 302-1)	-	0	-
24.2(Components, IS 302-1)	-	0	-
24.5(Components, IS 302-1)	-	0	-
24.6(Components, IS 302-1)	-	0	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	1000	-
26(Terminals for External Conductors, IS 302-1)	-	1000	-
27(Provision for Earthing, IS 302-1)	-	1000	-
27.2(Provision for Earthing, IS 302-1)	-	1000	-
27.3(Provision for Earthing, IS 302-1)	-	1000	-
27.4(Provision for Earthing, IS 302-1)	-	1000	-
27.5(Provision for Earthing, IS 302-1)	-	1000	-
28(Screws & Connections, IS 302-1)	-	1000	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
4(GENERAL REQUIREMENTS)	-	500	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
27(Provision for Earthing)	-	500	-
29(Clearances, Creepage distances and Solid Insulation)	-	500	-

10 Jul, 2028

-
Included w.e.f.22.08.2025 Exclusion Cl "24.1 (Components, IS 302-1) Cl 24.2 (Components, IS 302-1) Cl 24.5 (Components, IS 302-1) Cl 24.6 (Components, IS 302-1) Cl 32 (Radiation, Toxicity and similar Hazard IS 302-1) Cl 19.11.4.1 TO Cl 19.11.4.7" EMI/EMC

IS 302 : Part 2 : Sec 59 (2024)

Household and Similar Electrical Appliances â Safety Part 2 Particular Requirements Section 59 Insect Killers (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
11.3(Heating)	-	1000	-
11.7(Heating)	-	1000	-
11.8(Heating)	-	1000	-
12(Charging of metal-ion batteries)	-	0	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
14(Transient overvoltages)	-	2000	-
15(MOISTURE RESISTANCE)	-	1000	-
16(Leakage current and electric strength)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
19(ABNORMAL OPERATION)	-	500	-
19.11.4.1(Electrostatic discharges)	-	500	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Voltage surges)	-	0	-
19.11.4.5(Injected currents)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Mains signals)	-	0	-
20("STABILITY AND MECHANICAL HAZARDS")	-	500	-
21(MECHANICAL STRENGTH)	-	500	-
22(CONSTRUCTION)	-	1000	-
23(INTERNAL WIRING)	-	1000	-
24(COMPONENTS)	-	0	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	1000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	1000	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	0	-
29(Clearances, creepage distances and solid insulation)	-	1000	-

10 Jul, 2028

-
Included w.e.f. 04.08.2025 Exclusion: "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Voltage surges) 19.11.4.5 (Injected currents) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Mains signals) 24 (COMPONENTS) 32 (Radiation, toxicity and similar hazards) "

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	500	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	1000	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	1000	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.24 of IS 302-2-201: 2008(Component)	-	0	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	1000	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	1000	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	1000	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	0	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
4(GENERAL REQUIREMENTS)	-	0	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	0	-

10 Jul, 2028

-
Included w.e.f.21.08.2025 Exclusion Cl 19.11.4.1 to 19.11.4.7 EMI/EMC Cl.24 of IS 302-2-201: 2008 (Component)

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

All

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	500	-
Cl-7(Marking and instructions)	-	500	-
Cl-8(Protection against access to live parts)	-	500	-
Cl-10(Power input and current)	-	500	-
Cl-11(Heating)	-	500	-
Cl-12(Charging of metal-ion batteries)	-	0	-
Cl-13(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14(Transient overvoltages)	-	2000	-
Cl-15(Moisture resistance)	-	1000	-
Cl-16(Leakage current and electric strength)	-	1000	-
Cl-17(Overload protection of transformers and associated circuits)	-	0	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	1000	-
Cl-20(Stability and mechanical hazards)	-	1000	-
Cl-21(Mechanical strength)	-	500	-
Cl-22(Construction)	-	500	-
Cl-23(Internal wiring)	-	500	-
Cl-24(Components)	-	0	-
Cl-25(Supply connection and external flexible cords)	-	1000	-
Cl-26(Terminals for external conductors)	-	500	-
Cl-27(Provision for earthing)	-	500	-
Cl-28(Screws and connections)	-	500	-
Cl-29(Clearances, creepage distances and solid insulation)	-	500	-
Cl-30(Resistance to heat and fire)	-	500	-
Cl-31(Resistance to rusting)	-	500	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-
Cl-4(General requirement)	-	500	-
Cl-7(Marking and instructions)	-	500	-
Cl-8(Protection against access to live parts)	-	1000	-
Cl-10(Power input and current)	-	1000	-
Cl-11(Heating)	-	1000	-
Cl-12(Charging of metal-ion batteries)	-	1000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14(Transient overvoltages)	-	2000	-
Cl-15(Moisture resistance)	-	1000	-
Cl-16(Leakage current and electric strength)	-	1000	-
Cl-17(Overload protection of transformers and associated circuits)	-	2000	-
Cl-18(Endurance)	-	1000	-
Cl-19(Abnormal operation)	-	1000	-
Cl-20(Stability and mechanical hazards)	-	1000	-
Cl-21(Mechanical strength)	-	1000	-
Cl-22(Construction)	-	1000	-
Cl-23(Internal wiring)	-	1000	-
Cl-24(Components)	-	1000	-
Cl-25(Supply connection and external flexible cords)	-	1000	-
Cl-26(Terminals for external conductors)	-	1000	-
Cl-27(Provision for earthing)	-	1000	-
Cl-28(Screws and connections)	-	1000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	1000	-
Cl-30(Resistance to heat and fire)	-	1000	-
Cl-31(Resistance to rusting)	-	1000	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-
Cl-4(General requirement)	-	500	-
Cl-7(Marking and instructions)	-	1000	-
Cl-8(Protection against access to live parts)	-	1000	-
Cl-10(Power input and current)	-	1000	-
Cl-11(Heating)	-	1000	-
Cl-12(Charging of metal-ion batteries)	-	0	-
Cl-13(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14(Transient overvoltages)	-	2000	-
Cl-15(Moisture resistance)	-	1000	-
Cl-16(Leakage current and electric strength)	-	1000	-
Cl-17(Overload protection of transformers and associated circuits)	-	1000	-
Cl-18(Endurance)	-	1000	-
Cl-19(Abnormal operation)	-	1000	-
Cl-20(Stability and mechanical hazards)	-	1000	-
Cl-21(Mechanical strength)	-	1000	-
Cl-22(Construction)	-	1000	-
Cl-23(Internal wiring)	-	1000	-
Cl-24(Components)	-	1000	-
Cl-25(Supply connection and external flexible cords)	-	1000	-
Cl-26(Terminals for external conductors)	-	1000	-
Cl-27(Provision for earthing)	-	1000	-
Cl-28(Screws and connections)	-	1000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	1000	-
Cl-30(Resistance to heat and fire)	-	1000	-
Cl-31(Resistance to rusting)	-	1000	-
Cl-32(Radiation, toxicity and similar hazards)	-	0	-

10 Jul, 2028

-
Included w.e.f.21.08.2025 Exclusion Cl-12 (Charging of metal-ion batteries) Cl-24 (Components) Cl-32 (Radiation, toxicity and similar hazards)

IS 4159 (2021)

Mineral Filled Sheathed Heating Elements

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
"Cl. 6 IS 4159:2021"(Classification)	-	500	-
"Cl. 8 IS 4159:2021"(Protection against access to live parts)	-	500	-
"Cl. 9 IS 4159:2021"(Starting of motor operated appliances)	-	1000	-
"Cl. 10 IS 4159:2021"(Power Input and Current)	-	1000	-
"Cl. 11 IS 4159:2021"(Heating)	-	500	-
"Cl. 13 IS 4159:2021"(Leakage Current & Electrical Strength at Operating Temperature)	-	500	-
"Cl. 14 IS 4159:2021"(Transient Over Voltage)	-	2000	-
"Cl. 15 IS 4159:2021"(Moisture Resistance)	-	500	-
"Cl. 16 IS 4159:2021"(Leakage Current and Electric strength)	-	1000	-
"Cl. 17 IS 4159:2021"(Overload protection of transformers and associated circuits.)	-	0	-
"Cl. 18 IS 4159:2021"(Endurance)	-	0	-
"Cl. 19 IS 4159:2021"(Abnormal Operation)	-	500	-
"Cl. 20 IS 4159:2021"(Stability and mechanical Hazards)	-	500	-
"Cl. 21 IS 4159:2021"(Mechanical Strength)	-	500	-
"Cl. 22 IS 4159:2021"(Construction)	-	500	-
"Cl. 23 IS 4159:2021"(Internal Wiring)	-	500	-
"Cl. 24 IS 4159:2021"(Components)	-	0	-
"Cl. 25 IS 4159:2021"(Supply Connections and External Flexible Cables and Cords)	-	1000	-
"Cl. 26 IS 4159:2021"(Terminal For External Conductors)	-	500	-
"Cl. 27 IS 4159:2021"(Provision For Earthing)	-	500	-
"Cl. 28 IS 4159:2021"(Screws and Connections)	-	500	-
"Cl. 29 IS 4159:2021"(Creepage Distances, Clearances And Distances Through Insulation)	-	500	-
"Cl. 30 IS 4159:2021"(Resistance To Heat, Fire And Tracking)	-	1000	-
"Cl. 31 IS 4159:2021"(Resistance To Rusting)	-	500	-
"Cl. 102 IS 4159:2021"(Leakage and hydrostatic strength (for oil heating elements))	-	500	-
Cl.22.106(CONSTRUCTION)	-	500	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
Cl.7.1 of IS 4159:2021(Marking)	-	500	-
Cl.7.1 of IS 4159:2021(Marking)	-	500	-
Cl.7.1 of IS 4159:2021(Marking)	-	500	-
Cl.7.1 of IS 4159:2021(Marking)	-	500	-
Cl.7.1 of IS 4159:2021(Marking)	-	500	-
Cl.7.1 of IS 4159:2021(Marking)	-	500	-
Cl.7.2 of IS 4159:2021(Marking)	-	500	-
Cl.7.3 of IS 4159:2021(Marking)	-	500	-
Cl.10 of IS 302-1:2008(Power Input & Current)	-	500	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	500	-
Cl.11 of IS 4159:2021 & IS 302‐1:2008(Heating)	-	500	-
Cl.11.2 of IS 4159:2021(Heating)	-	500	-
Cl.11.101 of IS 4159:2021(Heating)	-	500	-
Cl.18 of IS 4159:2021(Endurance Test)	-	0	-
Cl.19.2 of IS 302-1: 2008(Abnormal Operation)	-	500	-
Cl.19.3 of IS 302-1: 2008(Abnormal Operation)	-	500	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	500	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	500	-
Cl.19.13 IS 302-1: 2008(Abnormal Operation)	-	500	-
Cl.22.101 of IS 4159:2021(Construction)	-	500	-
Cl.22.102 of IS 4159:2021(Construction)	-	500	-
Cl.22.103 of IS 4159:2021(Construction)	-	500	-
Cl.22.104 of IS 4159:2021(Construction)	-	500	-
Cl.22.105 of IS 4159:2021(Construction)	-	500	-
Cl.22.106 of IS 4159:2021(Construction)	-	500	-
Cl.22.107 of IS 4159:2021(Construction)	-	500	-
Cl.22.108 of IS 4159:2021(Construction)	-	500	-
Cl.22.109 of IS 4159:2021(Construction)	-	500	-
Cl.22.110 of IS 4159:2021(Construction)	-	500	-
Cl.22.111 of IS 4159:2021(Construction)	-	500	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	500	-
Cl.27 & IS 302-1: 2008(Provision for Earthing)	-	500	-
Cl.28.1 & IS 302-1: 2008(Screws & Connection)	-	500	-
Cl.28.4 IS 302-1: 2008(Screws & Connection)	-	500	-
Cl. 29.1 & IS 302-1: 2008(Creepage Distances & Clearances)	-	500	-
Cl. 29.2 & IS 302-1: 2009(Creepage Distances & Clearances)	-	500	-

10 Jul, 2028

-
Included w.e.f. 04.08.2025 Exclusion: "Cl. 24 IS 4159:2021"" (Components) 19.11.4.7 (Harmonics) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.5 (Immunity to conducted discharges) 19.11.4.4 (Surge immunity test) 19.11.4.3 (Fast transient bursts) 19.11.4.2 (Radiated fields) 19.11.4.1 (Electrostatic discharges) "

IS 368 (2014)

Electric immersion water heaters - Specification (Fifth Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	-
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	500	-
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	500	-
Cl.11 of IS 302-2201: 2008(Heating)	-	500	-
Cl. 12 of IS 368:2014(Operation under overload conditions of appliances with heating elements)	-	500	-
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	500	-
Cl.13 of IS 302-2-201: 2009(Leakage Current & Electric Strength at Operating Temperature)	-	500	-
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	500	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	500	-
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	500	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	500	-
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	500	-
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	500	-
Cl.18 of IS 368:2014(Endurance)	-	500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	500	-
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	500	-
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	500	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	500	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	500	-
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	500	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	500	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	500	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	500	-
Cl.22 of IS 302-2-201: 2008(Construction)	-	500	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	-
Cl.24 of IS 302-2-201: 2008(Component)	-	500	-
Cl.24 of IS 302-2-201: 2008(Component)	-	500	-
Cl.24 of IS 302-2-201: 2008(Component)	-	500	-
Cl.24 of IS 302-2-201: 2008(Component)	-	500	-
Cl.24 of IS 302-2-201: 2008(Component)	-	500	-
Cl.24 of IS 302-2-201: 2008(Component)	-	500	-
Cl.24 of IS 302-2-201: 2008(Component)	-	500	-
Cl.24 of IS 302-2-201: 2008(Component)	-	500	-
Cl.24 of IS 302-2-201: 2008(Component)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	-
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	500	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	500	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	500	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	500	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	500	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	500	-
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	500	-
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	500	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	500	-
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	500	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	500	-
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	500	-
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	500	-
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	500	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(GENERAL REQUIREMENT)	-	500	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-

10 Jul, 2028

-
Included w.e.f.18.08.2025

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

All

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	500	-
5(General conditions for the tests)	-	500	-
6(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	1000	-
9(Starting of motor-operated appliances)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(Moisture resistance)	-	500	-
16(Leakage current and electric strength)	-	500	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	1000	-
19(Abnormal operation)	-	1000	-
20(Stability and mechanical hazards)	-	500	-
21(Mechanical strength)	-	500	-
22(Construction)	-	500	-
23(Internal wiring)	-	500	-
24(Components)	-	500	-
25(Supply connection and external flexible cords)	-	500	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	0	-
A.101(Pressure test)	-	500	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
12(Charging of metal-ion batteries)	-	0	-
22.101(rated pressure)	-	500	-
22.102(Closed water heaters)	-	500	-
22.103(Addition)	-	500	-
22.104(Addition)	-	500	-
22.105(Cistern-type water heaters)	-	500	-
22.109(Addition)	-	500	-
4(General requirement)	-	500	-
5(General conditions for the tests)	-	500	-
6(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	500	-
9(Starting of motor-operated appliances)	-	500	-
10(Power input and current)	-	500	-
11(Heating)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	500	-
14(Transient overvoltages)	-	500	-
15(Moisture resistance)	-	500	-
16(Leakage current and electric strength)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
18(Endurance)	-	500	-
19(Abnormal operation)	-	500	-
20(Stability and mechanical hazards)	-	500	-
21(Mechanical strength)	-	500	-
22(Construction)	-	500	-
23(Internal wiring)	-	500	-
24(Components)	-	500	-
25(Supply connection and external flexible cords)	-	500	-
26(Terminals for external conductors)	-	500	-
27(Provision for earthing)	-	500	-
28(Screws and connections)	-	500	-
29(Clearances, creepage distances and solid insulation)	-	500	-
30(Resistance to heat and fire)	-	500	-
31(Resistance to rusting)	-	500	-
32(Radiation, toxicity and similar hazards)	-	500	-
A.101(Pressure test)	-	500	-
19.11.4.1(Electrostatic discharges)	-	500	-
19.11.4.2(Radiated fields)	-	500	-
19.11.4.3(Fast transient bursts)	-	500	-
19.11.4.4(Surge immunity test)	-	500	-
19.11.4.5(Immunity to conducted discharges)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.7(Harmonics)	-	500	-
12(Charging of metal-ion batteries)	-	500	-
22.101(rated pressure)	-	500	-
22.102(Closed water heaters)	-	500	-
22.103(Addition)	-	500	-
22.104(Addition)	-	500	-
22.105(Cistern-type water heaters)	-	500	-
22.109(Addition)	-	500	-

10 Jul, 2028

-
Included w.e.f.18.08.2025 Exclusion 24 (Component) Cl 19.11.4.1 to Cl 19.11.4.7

IS 366 (1991)

Electric iron - Specification (Fourth Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	500	-
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-	500	-
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	500	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-	500	-
10.0(Measurement of Heating up time)	-	500	-
10.0(Measurement of Heating up time)	-	500	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
11.0(Measurement of sole plate temperature)	-	1000	-
12.0(Measurement of Tempearture Distribution)	-	1000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1000	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	1000	-
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	1000	-
16.0(Measurement of Thermostatic staibility)	-	500	-
16.0(Measurement of Thermostatic staibility)	-	500	-
16.0(Measurement of Thermostatic staibility)	-	500	-
16.0(Measurement of Thermostatic staibility)	-	500	-
16.0(Measurement of Thermostatic staibility)	-	500	-
16.0(Measurement of Thermostatic staibility)	-	500	-
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.1 of IS 302-1))	-	500	-
7.0(Classification (as per Cl.6 of IS 302-2-3 and Cl.6.2 of IS 302-1))	-	500	-
9.0(Protection against access to live parts (as per Cl. 8 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Power input and current (as per Cl. 10 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Temperature Rise (as per Cl. 11 of IS 302-2-3 and IS 302-1))	-	1000	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Leakage current and Electric Strength at Operating Temperature (as per Cl. 13 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Transient Overvoltage (as per of Cl. 14 of IS 302-2-3 and Table 6 of IS 302-1))	-	500	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Moisture Resistance (as per of Cl.15 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Abnormal Operation (as per of Cl.19 of IS 302-2-3 and IS 302-1) )	-	1000	-
9.0(Staibilty and mechanical hazards (as per of Cl.20 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Mechanical strength (as per of Cl.21 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Construction (as per of Cl.22 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Internal wiring (as per of Cl.23 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Supply connection and external flexible cord (as per of Cl.25 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Terminals for external conductors (as per of Cl.26 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Provision for earthing (as per of Cl.27 of IS 302-2-3 and IS 302-1) )	-	500	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Screw and connections (as per of Cl.28 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Clearances, creepage distances and solid insulation (as per of Cl.29 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Resistance to Heat and Fire (as per of Cl.30 of IS 302-2-3 and IS 302-1))	-	500	-
9.0(Resistance to Rusting (as per of Cl.31 of IS 302-2-3 and IS 302-1))	-	500	-
10.0(Measurement of Heating up time)	-	500	-
10.0(Measurement of Heating up time)	-	500	-
11.0(Measurement of sole plate temperature)	-	500	-
11.0(Measurement of sole plate temperature)	-	500	-
11.0(Measurement of sole plate temperature)	-	500	-
11.0(Measurement of sole plate temperature)	-	500	-
12.0(Measurement of Tempearture Distribution)	-	500	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	500	-
13.0(Measurement of Initial overswing temperature and Heating up excess temperature)	-	500	-
14.0(Measurement of Cyclic fluctuation of temperature of hottest point )	-	500	-
16.0(Measurement of Thermostatic staibility)	-	500	-
16.0(Measurement of Thermostatic staibility)	-	500	-
16.0(Measurement of Thermostatic staibility)	-	500	-
16.0(Measurement of Thermostatic staibility)	-	500	-
16.0(Measurement of Thermostatic staibility)	-	500	-
16.0(Measurement of Thermostatic staibility)	-	500	-
6(Measurement of Thermostatic staibility)	-	500	-
15(MEASUREMENT OF TEMPERATURE DROP UNDER LOAD)	-	500	-
17(Measurement of Thermostatic staibility)	-	500	-
16 of IS 302-2-3(Leakage current electric strength)	-	500	-
4(GENERAL REQUIREMENTS)	-	500	-
5(GENERAL NOTES ON TESTS)	-	500	-
8(Marking)	-	500	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	500	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	500	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	500	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	500	-
(Cl.11 of IS 302-2-3 :2007)(Heating)	-	500	-
(Cl.22 of IS 302-2-3 :2007)(Construction)	-	500	-
(Cl.22 of IS 302-2-3 :2007)(Construction)	-	500	-
(Cl.32 of IS 302-2-3 :2007)(Radiation, Toxicity and similar)	-	0	-
6(Measurement of Thermostatic staibility)	-	500	-
15(MEASUREMENT OF TEMPERATURE DROP UNDER LOAD)	-	500	-
17(Measurement of Thermostatic staibility)	-	500	-
16 of IS 302-2-3(Leakage current electric strength)	-	500	-
4(GENERAL REQUIREMENTS)	-	500	-
5(GENERAL NOTES ON TESTS)	-	500	-
8(Marking)	-	500	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	500	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	500	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	500	-
(Cl.8 of IS 366:1991 )(Marking and Instructions)	-	500	-
(Cl.11 of IS 302-2-3 :2007)(Heating)	-	500	-
(Cl.22 of IS 302-2-3 :2007)(Construction)	-	500	-
(Cl.22 of IS 302-2-3 :2007)(Construction)	-	500	-
(Cl.32 of IS 302-2-3 :2007)(Radiation, Toxicity and similar)	-	500	-

10 Jul, 2028

-
Included w.e.f.18.08.2025 Exclusion 9.0 (Components (as per of Cl.24 of IS 302-2-3 and IS 302-1) ) (Cl.32 of IS 302-2-3 :2007) (Radiation, Toxicity and similar)

IS 4250 (2025)

Electric Food-Mixers (Liquidizers and Grinders) and Centrifugal Juicers ï¿½ Specification ( Second Revision )

All

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General Requirements)	-	1000	-
Cl-5(General Conditions for the tests)	-	1000	-
Cl-6(Classification)	-	1000	-
Cl-7(Marking)	-	1000	-
Cl-8(Safety Requirements)	-	2500	-
Cl-9(Endurance fpr motor and base assembly)	-	1500	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	500	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	500	-
Cl-10.4(Idli Batter)	-	500	-
Cl-10.5(Operational Tests for Juicers)	-	500	-
Cl-11(Temperature Withstand Test for Bowl)	-	1000	-
Cl-12.1(Test for Switches)	-	1000	-
Cl-13(Strength of Assembly)	-	1000	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	1000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	500	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	500	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	500	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	500	-
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	500	-
Cl-19.11.4.1(Electrostatic discharges)	-	0	-
Cl-19.11.4.2(Radiated fields)	-	0	-
Cl-19.11.4.3(Fast transient bursts)	-	0	-
Cl-19.11.4.4(Surge immunity test)	-	0	-
Cl-19.11.4.5(Immunity to conducted discharges)	-	0	-
Cl-19.11.4.7(Harmonics)	-	0	-
Cl-4(General Requirements)	-	500	-
Cl-5(General Conditions for the tests)	-	500	-
Cl-6(Classification)	-	500	-
Cl-7(Marking)	-	500	-
Cl-8(Safety Requirements)	-	1000	-
Cl-9(Endurance fpr motor and base assembly)	-	1000	-
Cl-10.2("Grinding Coffee (for Machines that Have a Dry Grinding Arrangement)")	-	2000	-
Cl-10.3(Whisking Egg Whites (for Machines that have Whisking Egg Arrangement))	-	1000	-
Cl-10.4(Idli Batter)	-	1000	-
Cl-10.5(Operational Tests for Juicers)	-	1000	-
Cl-11(Temperature Withstand Test for Bowl)	-	1000	-
Cl-12.1(Test for Switches)	-	500	-
Cl-13(Strength of Assembly)	-	500	-
Cl-14.2, 14.3 Table-2 (i)(Protection against access to live parts)	-	1000	-
Cl-14.2, Table-2 (ii)(Power input and current)	-	1000	-
Cl-14.2, 14.3 Table-2 (iii)(Leakage current and electric strength at operating temperature)	-	1000	-
Cl-14.2, Table-2 (iv)(Moisture resistance)	-	500	-
Cl-14.2, Table-2 (v)(Leakage current and electric strength)	-	1000	-
Cl-19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
Cl-14.2, 14.3 Table-2 (vi)(Provision for earthing)	-	500	-
Cl-19.11.4.1(Electrostatic discharges)	-	0	-
Cl-19.11.4.2(Radiated fields)	-	0	-
Cl-19.11.4.3(Fast transient bursts)	-	0	-
Cl-19.11.4.4(Surge immunity test)	-	0	-
Cl-19.11.4.5(Immunity to conducted discharges)	-	0	-
Cl-19.11.4.7(Harmonics)	-	0	-

10 Jul, 2028

-
Included w.e.f.18.08.2025 Exclusion Cl 19.11.4.1 to Cl 19.11.4.7 EMI/EMC 12(Charging of metal-ion Batteries)

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	500	-
6(Classification- IS 302-1)	-	500	-
5(General conditions for the tests)	-	500	-
19.11.4.7(Harmonics)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.1(Electrostatic discharges)	-	0	-
11.8(Temperature rise)	-	1000	-
11.7(Duration corresponding)	-	500	-
11.6(Combined appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.4(Heating appliances)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
18(Endurance)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
16(Leakage current and electric strength)	-	1000	-
4(General requirement)	-	500	-
32.1(Radiation Toxicity and Similar Hazards)	-	0	-
31(Resistance to Rusting)	-	1000	-
30.2(Needle Flame Test)	-	1000	-
30.2(Glow Wire Test)	-	1000	-
30.1(Ball pressure test)	-	1000	-
29(clearance, creepage distances and solid insulation)	-	1000	-
28(Screw test and connections)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	500	-
26(Terminals for external conductors)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
24(Components)	-	0	-
23.1(Internal Wiring, IS 302-1)	-	500	-
22.1(Construction, IS 302-1)	-	1000	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
19(Abnormal Operation)	-	500	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	0	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	1000	-
15.3(Humidity Test)	-	1000	-
15.2(Spillage Test)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.0(Moisture resistance)	-	500	-
14(Transient Over Voltages)	-	1500	-
13.3(Electric Strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	500	-
11.3(Heating)	-	1000	-
11.2(General)	-	500	-
11.1(General)	-	500	-
10.2(Current input)	-	500	-
10.1(Power input)	-	500	-
9(Starting of motor operation test requirements and tests)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
7(Marking and instructions)	-	500	-
A.2(Earth continuity test)	-	500	-
Annex C(Ageing test on motors)	-	0	-
Annex D(Thermal motor protectors)	-	0	-
15.2(Moisture resistance)	-	500	-
19.17(Abnormal Operation, IS 302-1)	-	500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
21.3(Mechanical Strength, IS 302-1)	-	500	-
22.5(Construction)	-	500	-
22.6(Construction, IS 302-1)	-	500	-
22.11(Construction, IS 302-1)	-	500	-
22.16(Construction)	-	500	-
22.32(Construction, IS 302-1)	-	500	-
22.42(Construction)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26.5(Terminals for external conductors)	-	500	-
27.5(Provision for Earthing, IS 302-1)	-	500	-
28.1(Screws and connections)	-	500	-
22.2(Construction, IS 302-1)	-	500	-
22.3(Construction, IS 302-1)	-	500	-
B.22.4(Construction, IS 302-1)	-	500	-
B.22.5(Construction, IS 302-1)	-	500	-
16.0(General)	-	1000	-
12(Charging of metal-ion batteries)	-	-	-
6(Classification- IS 302-1)	-	-	-
5(General conditions for the tests)	-	-	-
19.11.4.7(Harmonics)	-	-	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	-	-
19.11.4.5(Immunity to conducted discharges)	-	-	-
19.11.4.4(Surge immunity test)	-	-	-
19.11.4.3(Fast transient bursts)	-	-	-
19.11.4.2(Radiated fields)	-	-	-
19.11.4.1(Electrostatic discharges)	-	-	-
11.8(Temperature rise)	-	-	-
11.7(Duration corresponding)	-	-	-
11.6(Combined appliances)	-	-	-
11.5(Motor-operated appliances)	-	-	-
11.4(Heating appliances)	-	-	-
8.1.5(Live parts of built-in appliances)	-	-	-
18(Endurance)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
16(Leakage current and electric strength)	-	-	-
4(General requirement)	-	-	-
32.1(Radiation Toxicity and Similar Hazards)	-	-	-
31(Resistance to Rusting)	-	-	-
30.2(Needle Flame Test)	-	-	-
30.2(Glow Wire Test)	-	-	-
30.1(Ball pressure test)	-	-	-
29(clearance, creepage distances and solid insulation)	-	-	-
28(Screw test and connections)	-	-	-
27.1(Provision for Earthing, IS 302-1)	-	-	-
26(Terminals for external conductors)	-	-	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
24(Components)	-	-	-
23.1(Internal Wiring, IS 302-1)	-	-	-
22.1(Construction, IS 302-1)	-	-	-
21.1(Mechanical Strength, IS 302-1)	-	-	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	-	-
19(Abnormal Operation)	-	-	-
18(Endurance)	-	-	-
17(Over Load Protection of Transformers and associated circuits)	-	-	-
16.3(Electric Strength (after clause 15 and 16.2))	-	-	-
16.2(Leakage Current (after Clause 15))	-	-	-
16.1(General)	-	-	-
15.3(Humidity Test)	-	-	-
15.2(Spillage Test)	-	-	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	-	-
15.0(Moisture resistance)	-	-	-
14(Transient Over Voltages)	-	-	-
13.3(Electric Strength at operating temperature)	-	-	-
13.2(Leakage current at operating temperature)	-	-	-
13(Leakage current and electric strength at operating temperature)	-	-	-
11.3(Heating)	-	-	-
11.2(General)	-	-	-
11.1(General)	-	-	-
10.2(Current input)	-	-	-
10.1(Power input)	-	-	-
9(Starting of motor operation test requirements and tests)	-	-	-
8.1.4(Protection against live parts against protective impedance)	-	-	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	-	-
8.1.2(Protection against live parts in openings)	-	-	-
8.1.1(Protection against live parts in all positions)	-	-	-
7(Marking and instructions)	-	-	-
A.2(Earth continuity test)	-	-	-
Annex C(Ageing test on motors)	-	-	-
Annex D(Thermal motor protectors)	-	-	-
15.2(Moisture resistance)	-	-	-
19.17(Abnormal Operation, IS 302-1)	-	-	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	-	-
21.2(Mechanical Strength, IS 302-1)	-	-	-
21.3(Mechanical Strength, IS 302-1)	-	-	-
22.5(Construction)	-	-	-
22.6(Construction, IS 302-1)	-	-	-
22.11(Construction, IS 302-1)	-	-	-
22.16(Construction)	-	-	-
22.32(Construction, IS 302-1)	-	-	-
22.42(Construction)	-	-	-
23.3(Internal Wiring, IS 302-1)	-	-	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	-	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	-	-
26.5(Terminals for external conductors)	-	-	-
27.5(Provision for Earthing, IS 302-1)	-	-	-
28.1(Screws and connections)	-	-	-
22.2(Construction, IS 302-1)	-	-	-
22.3(Construction, IS 302-1)	-	-	-
B.22.4(Construction, IS 302-1)	-	-	-
B.22.5(Construction, IS 302-1)	-	-	-
16.0(General)	-	-	-

10 Jul, 2028

-
Included w.e.f 28.07.2025 Exclusion: Cl 19.11.4.1- 19.11.4.7(EMI/EMC), Cl 12 (Charging of metal-ion batteries), Cl 24 (Components), Cl 32 (Radiation Toxicity and Similar Hazards)

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1)	-	500	-
7(Marking and instructions)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
9(Starting of motor operation test requirements and tests)	-	1000	-
10.1(Power input)	-	500	-
10.2(Current input)	-	500	-
11.1(General)	-	500	-
11.2(General)	-	500	-
11.3(Heating)	-	500	-
13.1(General)	-	500	-
13.2(Leakage current at operating temperature)	-	1500	-
13.3(Electric Strength at operating temperature)	-	1000	-
14(Transient Over Voltages)	-	2000	-
15.0(General)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.2(Spillage Test)	-	500	-
15.3(Humidity Test)	-	1000	-
16.0(General)	-	500	-
16.1(General)	-	500	-
16.2(Leakage Current (after Clause 15))	-	1000	-
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	-
17(Over Load Protection of Transformers and associated circuits)	-	1500	-
18(Endurance Test requirements and tests)	-	1000	-
19(Abnormal Operation)	-	1000	-
20(Stability test)	-	1000	-
21(Mechanical Strength Test)	-	500	-
22(Construction verification related test)	-	500	-
23(General)	-	500	-
24(Components)	-	1000	-
25(Supply connection and external flexible cords)	-	500	-
26(Terminals for external conductors)	-	500	-
27(Provision for earthing)	-	500	-
28(Screw test and connections)	-	500	-
29(clearance, creepage distances and solid insulation)	-	1000	-
30.1(Ball pressure test)	-	500	-
30.2(Glow Wire Test)	-	1500	-
30.2(Needle Flame Test)	-	1500	-
31(Resistance to Rusting)	-	1000	-
32(Radiation Toxicity and Similar Hazards)	-	0	-
4(General requirement)	-	500	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	1000	-
18(Endurance)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
11.4(Heating appliances)	-	1000	-
11.5(Motor-operated appliances)	-	1000	-
11.6(Combined appliances)	-	1000	-
11.7(Duration corresponding)	-	1500	-
11.8(Temperature rise)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	0	-
19.11.4.2(Radiated fields)	-	0	-
19.11.4.3(Fast transient bursts)	-	0	-
19.11.4.4(Surge immunity test)	-	0	-
19.11.4.5(Immunity to conducted discharges)	-	0	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	0	-
19.11.4.7(Harmonics)	-	0	-
4(General Requirement)	-	500	-
5(General conditions for tests)	-	500	-
6(Classification- IS 302-1)	-	-	-
7(Marking and instructions)	-	-	-
8.1.1(Protection against live parts in all positions)	-	-	-
8.1.2(Protection against live parts in openings)	-	-	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	-	-
8.1.4(Protection against live parts against protective impedance)	-	-	-
9(Starting of motor operation test requirements and tests)	-	-	-
10.1(Power input)	-	-	-
10.2(Current input)	-	-	-
11.1(General)	-	-	-
11.2(General)	-	-	-
11.3(Heating)	-	-	-
13.1(General)	-	-	-
13.2(Leakage current at operating temperature)	-	-	-
13.3(Electric Strength at operating temperature)	-	-	-
14(Transient Over Voltages)	-	-	-
15.0(General)	-	-	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	-	-
15.2(Spillage Test)	-	-	-
15.3(Humidity Test)	-	-	-
16.0(General)	-	-	-
16.1(General)	-	-	-
16.2(Leakage Current (after Clause 15))	-	-	-
16.3(Electric Strength (after clause 15 and 16.2))	-	-	-
17(Over Load Protection of Transformers and associated circuits)	-	-	-
18(Endurance Test requirements and tests)	-	-	-
19(Abnormal Operation)	-	-	-
20(Stability test)	-	-	-
21(Mechanical Strength Test)	-	-	-
22(Construction verification related test)	-	-	-
23(General)	-	-	-
24(Components)	-	-	-
25(Supply connection and external flexible cords)	-	-	-
26(Terminals for external conductors)	-	-	-
27(Provision for earthing)	-	-	-
28(Screw test and connections)	-	-	-
29(clearance, creepage distances and solid insulation)	-	-	-
30.1(Ball pressure test)	-	-	-
30.2(Glow Wire Test)	-	-	-
30.2(Needle Flame Test)	-	-	-
31(Resistance to Rusting)	-	-	-
32(Radiation Toxicity and Similar Hazards)	-	-	-
4(General requirement)	-	-	-
16(Leakage current and electric strength)	-	-	-
17(Overload protection of transformers and associated circuits)	-	-	-
18(Endurance)	-	-	-
8.1.5(Live parts of built-in appliances)	-	-	-
11.4(Heating appliances)	-	-	-
11.5(Motor-operated appliances)	-	-	-
11.6(Combined appliances)	-	-	-
11.7(Duration corresponding)	-	-	-
11.8(Temperature rise)	-	-	-
19.11.4.1(Electrostatic discharges)	-	-	-
19.11.4.2(Radiated fields)	-	-	-
19.11.4.3(Fast transient bursts)	-	-	-
19.11.4.4(Surge immunity test)	-	-	-
19.11.4.5(Immunity to conducted discharges)	-	-	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	-	-
19.11.4.7(Harmonics)	-	-	-
4(General Requirement)	-	-	-
5(General conditions for tests)	-	-	-

10 Jul, 2028

-
Included w.e.f 28.07.2025 Exclusion: Cl 19.11.4.1- 19.11.4.7(EMI/EMC), Cl 24 (Components), Cl 32 (Radiation Toxicity and Similar Hazards)

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

Closed Type / Open-Outlet Type

17000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6 IS 302-2-35(Classification)	-	100	-
Cl. 7 IS 302-2-35(Marking and Instruction)	-	100	-
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	300	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	300	-
Cl.10(Verification)	-	100	-
Cl. 11 IS 302-2-35(Heating)	-	1200	-
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	1500	-
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	500	-
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	1200	-
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	1500	-
Cl. 19 IS 302-2-35(Abnormal Operation )	-	1300	-
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	300	-
Cl. 21 IS 302-2-35(Mechanical strength)	-	200	-
Cl. 22 IS 302-2-35(Construction )	-	500	-
Cl. 23 IS 302-2-35(Internal Wiring)	-	300	-
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	500	-
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	200	-
Cl. 27 IS 302-2-35(Provision for Earthing )	-	400	-
Cl. 28 IS 302-2-35(Screws & Connections)	-	200	-
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	100	-
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	300	-
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	300	-
Cl.32(Verification)	-	100	-
Cl.31(Verification)	-	100	-
Cl.30(Verification)	-	100	-
CL.29(Verification)	-	100	-
Cl.28(Verification)	-	100	-
Cl.27(Verification)	-	100	-
Cl.26(Verification)	-	100	-
Cl.25(Verification)	-	100	-
Cl.24(Verification)	-	100	-
Cl.23(Verification)	-	100	-
Cl.22(Verification)	-	100	-
Cl.21(Verification)	-	100	-
Cl.20(Verification)	-	100	-
Cl.19(Verification)	-	100	-
Cl.17(Verification)	-	100	-
Cl. 16(Verification)	-	100	-
Cl.15(Verification)	-	100	-
Cl.14(Verification)	-	100	-
Cl.13(Verification)	-	100	-
Cl.11(Verification)	-	100	-
Cl.8(Verification)	-	100	-
Cl. 7(Verification)	-	100	-
Cl. 7(Verification)	-	100	-
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	300	-
Cl. 24 IS 302-2-35(Components)	-	300	-
Cl. 18 IS 302-2-35(Endurance)	-	3000	-
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	500	-
Cl. 10 IS 302-2-35(Power Input and Current )	-	300	-
19.11.4.7(Harmonics)	-	200	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	300	-
19.11.4.5(Immunity to conducted discharges)	-	300	-
19.11.4.4(Surge immunity test)	-	300	-
19.11.4.3(Fast transient bursts)	-	300	-
19.11.4.2(Radiated fields)	-	300	-
19.11.4.1(Electrostatic discharges)	-	300	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	300	-
4(GENERAL REQUIREMENT)	-	30000	ok

10 Jul, 2028

-
Exclusion: Cl 19.11.4.1-19.11.4.7(EMI/EMC)

IS 4250 (1980)

Specification for domestic electric food - Mixers (Liquidizers And Grinders) (First Revision)

Domestic Electric Food Mixers Liquidizer/Grinder/Juicer

16000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	100	-
Cl. 7(Marking and instructions)	-	100	-
Cl.8(Protection against access to live parts/ Protection against electric shock)	-	200	-
9(Starting, IS 302-1)	-	200	-
Cl.10(Power Input and Current)	-	400	-
Cl.11(Temperature rise/ Heating)	-	500	-
Cl.13(Leakage current and Electric strength at operating temperature)	-	500	-
Cl.14(Transient Over voltage)	-	1000	-
Cl.15(Moisture Resistance)	-	1500	-
Cl. 16(Leakage current and Electric strength)	-	500	-
Cl.19(Abnormal operation)	-	2000	-
Cl.20(Stability & Mechanical Hazards)	-	300	-
Cl.21(Mechanical Strength)	-	300	-
Cl.22(Construction)	-	1500	-
Cl.23(Internal wiring)	-	500	-
Cl.25(Supply connection and external flexible cords)	-	500	-
Cl.26(Terminals for external conductors)	-	500	-
Cl.27(Provision for Earthing)	-	300	-
Cl.28(Screws and connections)	-	300	-
CL.29(Clearances, Creepage distances and Solid Insulation)	-	200	-
Cl.30(Resistance to heat and fire)	-	1200	-
Cl.31(Resistance to rusting)	-	1000	-
Cl 34(Operational Tests)	-	200	-
Cl 35(Temperature withstand test for bowl)	-	200	-
Cl 36(Test for controls)	-	200	-
Cl 37(Strength of assembly)	-	300	-
6(Classification- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.2(Marking)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.4(Marking)	-	100	-
7.5(Marking)	-	100	-
7.6(Marking)	-	100	-
8( Protection Against Electric Shock, IS 302-1)	-	200	-
10(Power Input and Current, IS 302-1)	-	400	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
14(Transient Over Voltages, IS 302-1)	-	1000	-
15.1(Moisture Resistance, IS 302-1)	-	1500	-
15.2(Moisture Resistance-Spillage test)	-	200	-
15(Moisture Resistance, IS 302-1)	-	1500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
19(Abnormal Operation, IS 302-1)	-	2000	-
19(Abnormal Operation, IS 302-1)	-	2000	-
19(Abnormal Operation, IS 302-1)	-	2000	-
19(Abnormal Operation, IS 302-1)	-	2000	-
20(Stability & Mechanical Hazards, IS 302-1)	-	300	-
20(Stability & Mechanical Hazards, IS 302-1)	-	300	-
21(Mechanical Strength, IS 302-1)	-	300	-
21(Mechanical Strength, IS 302-1)	-	300	-
22.1(Construction, IS 302-1)	-	1500	-
22.2(Construction)	-	1500	-
22.3(Construction)	-	1500	-
22.4(Construction)	-	1500	-
22.5(Construction)	-	1500	-
22.6(Construction)	-	1500	-
22.8(Construction)	-	1500	-
22.9(Construction)	-	1500	-
22.1(Construction)	-	1500	-
34.5.1 (a)(Operational test for juicers )	-	500	-
34.5.1 (b)(Operational test for juicers )	-	500	-
34.5.2(Operational test for juicers )	-	500	-
35(Temperature withstand test for bowl)	-	200	-
36(Test for controls )	-	200	-
37(Strength of Assembly )	-	300	-
Cl.32(Radiation, toxicity and similar hazards)	-	500	-
Cl.24(Components)	-	500	-
Cl.18(Endurance)	-	2000	-
5(RATING)	-	100	-
4(GENERAL NOTES ON TESTS)	-	500	-
3(GENERAL REQUIREMENTS)	-	500	-
19.11.4.1(Electrostatic discharges)	-	500	-
19.11.4.2(Radiated fields)	-	500	-
19.11.4.3(Fast transient bursts)	-	500	-
19.11.4.4(Surge immunity test)	-	500	-
19.11.4.5(Immunity to conducted discharges)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.7(Harmonics)	-	500	-
24.1(Components, IS 302-1)	-	500	-
24.1(Components, IS 302-1)	-	500	-
24.1(Components, IS 302-1)	-	500	-
24.1(Components, IS 302-1)	-	500	-
24.2(Components)	-	500	-
24.4(Components)	-	500	-
24.5(Components)	-	500	-
24.6(Components)	-	500	-
24.7(Components)	-	500	-
24.8(Components)	-	500	-
24.9(Components)	-	500	-
23(Internal Wiring, IS 302-1)	-	500	-
23(Internal Wiring, IS 302-1)	-	500	-
23(Internal Wiring, IS 302-1)	-	500	-
23(Internal Wiring, IS 302-1)	-	500	-
23(Internal Wiring, IS 302-1)	-	500	-
23(Internal Wiring, IS 302-1)	-	500	-
23(Internal Wiring, IS 302-1)	-	500	-
23(Internal Wiring, IS 302-1)	-	500	-
23(Internal Wiring, IS 302-1)	-	500	-
23(Internal Wiring, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26(Terminals for External Conductors, IS 302-1)	-	500	-
27(Provision for Earthing, IS 302-1)	-	300	-
27(Provision for Earthing, IS 302-1)	-	300	-
27(Provision for Earthing, IS 302-1)	-	300	-
27(Provision for Earthing, IS 302-1)	-	300	-
27(Provision for Earthing, IS 302-1)	-	300	-
28(Screws & Connections, IS 302-1)	-	300	-
29(Clearances and Distances through Insulation, IS 302-1)	-	200	-
29(Clearances and Distances through Insulation, IS 302-1)	-	200	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	1000	-
30(Resistance to Heat, Fire, Tracking, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-
37(Strength of Assembly )	-	300	-
Cl. 6(Classification)	-	100	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	200	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	200	-
34.2(Operational tests- Grinding coffee (for machines which have a dry grinding arrangement))	-	200	-
34.3(Whisking egg whites )	-	300	-
34.4(IDLI batter-Grinding of black gram)	-	300	-
34.4(IDLI batter-Grinding of rice)	-	300	-
34.4(IDLI batter-Grinding of rice)	-	300	-
34.4(IDLI batter-Grinding of rice)	-	300	-

10 Jul, 2028

-
-

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

Electrical appliances for heating Liquids

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	100	-
7(Marking and instructions)	-	100	-
8(Protection against live parts)	-	200	-
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	200	-
10(POWER INPUT AND CURRENT)	-	400	-
11(HEATING)	-	500	-
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	500	-
14(TRANSIENT OVERVOLTAGES)	-	1000	-
15(MOISTURE RESISTANCE)	-	1500	-
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	500	-
19(ABNORMAL OPERATION)	-	2000	-
20(STABILITY AND MECHANICAL HAZARDS)	-	300	-
21(MECHANICAL STRENGTH)	-	300	-
22(CONSTRUCTION)	-	1500	-
23(INTERNAL WIRING)	-	500	-
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	500	-
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	-
27(PROVISION FOR EARTHING)	-	300	-
28(SCREWS AND CONNECTIONS)	-	300	-
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	200	-
30(RESISTANCE TO HEAT AND FIRE)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	100	-
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	-
18(ENDURANCE)	-	1500	-
22.16(Automatic cord reel)	-	1000	-
22.32(Oxygen bomb for rubber material)	-	100	-
22.47(Water pressure inlet)	-	200	-
22.106(Interlocks)	-	200	-
22.3(Flexing test)	-	500	-
24(COMPONENTS)	-	1000	-
24(Components)	-	1000	-
19.11.4.1(Electrostatic discharges)	-	500	-
19.11.4.2(Radiated fields)	-	500	-
19.11.4.3(Fast transient bursts)	-	500	-
19.11.4.4(Surge immunity test)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.7(Harmonics)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-2-15)	-	2000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	2000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	2000	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	2000	-
19.11.4.5(Immunity to conducted discharges)	-	500	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-2-15)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.5(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.7(Marking- IS 302-1)	-	100	-
7.8(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-2-15)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.5(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.7(Marking- IS 302-1)	-	100	-
7.8(Marking- IS 302-1)	-	100	-
7.9(Marking- IS 302-1)	-	100	-
7.1O(Marking- IS 302-1)	-	100	-
7.11(Marking- IS 302-1)	-	100	-
7.12(Marking- IS 302-2-15)	-	100	-
7.12(Marking- IS 302-1)	-	100	-
7.12.1(Marking- IS 302-1)	-	100	-
7.12.3(Marking- IS 302-1)	-	100	-
7.12.5(Marking- IS 302-1)	-	100	-
7.12.6(Marking- IS 302-1)	-	100	-
7.13(Marking- IS 302-1)	-	100	-
7.14(Marking- IS 302-1)	-	100	-
7.15(Marking- IS 302-1)	-	100	-
7.101(Marking- IS 302-2-15)	-	100	-
4(General requirements)	-	100	-
5(General Conditions of tests)	-	100	-
6(Classification- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
8(Protection Against Electric Shock, IS 302-1)	-	200	-
Marking- IS 302-1(Marking- IS 302-1)	-	100	-
10(Power Input and Current, IS 302-1)	-	400	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
11(Heating, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	-
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	-
15.1(Moisture Resistance, IS 302-1)	-	1500	-
15.2(Spillage test as 15.2, IS 3.02-1 & 302-2-15)	-	500	-
16(Leakage current as per Cl 16, IS 302-1)	-	500	-
16(electric strength as per Cl 16, IS 302-1)	-	500	-
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	2000	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	300	-
21.1(Mechanical Strength, IS 302-1)	-	300	-
21.2(Mechanical Strength, IS 302-1)	-	300	-
22.1(Construction, IS 302-1)	-	1500	-
22.7(Construction as per Cl 22.7, IS 3.02-2-15)	-	1500	-
22.107(Construction as per Cl 22.7, IS 3.02-2-15)	-	1500	-
22.108(Construction as per Cl 22.8, IS 3.02-2-15)	-	1500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
23.2(Internal Wiring, IS 302-1)	-	500	-
23.4(Internal Wiring, IS 302-1)	-	500	-
23.5(Internal Wiring, IS 302-1)	-	500	-
23.6(Internal Wiring, IS 302-1)	-	500	-
23.7(Internal Wiring, IS 302-1)	-	500	-
23.8(Internal Wiring, IS 302-1)	-	500	-
23.9(Internal Wiring, IS 302-1)	-	500	-
23.1O(Internal Wiring, IS 302-1)	-	500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	1500	-
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26(Terminals for External Conductors, IS 302-1)	-	500	-
27.1(Provision for Earthing, IS 302-1)	-	500	-
27.2(Provision for Earthing, IS 302-1)	-	300	-
27.3(Provision for Earthing, IS 302-1)	-	300	-
27.4(Provision for Earthing, IS 302-1)	-	300	-
27.5(Provision for Earthing, IS 302-1)	-	300	-
28(Screws & Connections, IS 302-1)	-	300	-
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	200	-
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	200	-
30.1(Resistance to Heat and Fire, IS 302-1)	-	1000	-
30.2(Resistance to Heat and Fire, IS 302-1)	-	1000	-
31(Resistance of Rusting, IS 302-1)	-	1000	-

10 Jul, 2028

-
Exclusion: Cl 19.11.4.1-19.11.4.7 (EMI/EMC)

IS 2082 (2018)

Stationary storage type electric water heaters - Specification (Fifth Revision)

Closed / Open-Outlet/ Cistern-fed/ Cistern-type/Low-pre

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-14(Verification of the rated capacity)	-	500	-
(Cl.15 of IS 2082:2018)(Verification of the Rated Capacity)	-	500	-
Cl.16 of IS 2082:2018(Standing Loss per 24 Hours)	-	2500	-
(Cl.17 of IS 2082:2018)(Hot Water Output)	-	2500	-
(Cl.18 of IS 2082:2018)( Reheating Time)	-	2500	-
(Cl.19 of IS 2082:2018)(Mixing Factor)	-	2500	-
(Cl.20 of IS 2082:2018)(Deviation of Dial Calibration)	-	2500	-
(Cl.21 of IS 2082:2018)(Cyclic Temperature Variation)	-	2500	-
4(GENERAL REQUIREMENT)	-	500	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	500	-
6(Classification )	-	100	-
6(Classification )	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
7.101(Marking : Indifiction of water inlet and water outlet )	-	100	-
7.14(Marking : Legibility and durability)	-	100	-
7.11(Marking : Indication of controls )	-	100	-
7.8(Marking : Terminals )	-	100	-
7.6(Marking : Symbol used )	-	100	-
7.1(Marking : Warning for Open- outlet )	-	100	-
7.1(Marking : Statement for pressure reducing valve ( For rated pressure less than 0.6 MPa))	-	100	-
7.1(Marking : Statement for a pressure-relief device)	-	100	-
7.1(Marking : Rated capacity)	-	100	-
7.1(Marking : Rated pressure)	-	100	-
7.1(Marking : Country of manufacture)	-	100	-
7.1(Marking: IP Number)	-	100	-
7.1(Marking: Symbol for Class II)	-	100	-
7.1(Marking: Model or type reference)	-	100	-
7.1(Marking: Name, trademark or identification mark of manufacturer )	-	100	-
7.1(Marking : Rated power input)	-	100	-
7.1(Marking : Symbol for nature of supply )	-	100	-
7.1(Marking : Rated Voltage )	-	100	-
7(Marking)	-	100	-
7(Marking)	-	100	-
(Cl.8 of IS 302-2-21:2011)(Protection Against Access to Live Parts)	-	200	-
Cl.8 of IS 302-2-21:2018(Protection Against Access to Live Parts)	-	200	-
(Cl.10 of IS 302-2-21: 2011)(Power Input & Current)	-	400	-
Cl.10 of IS 302-2-21: 2018(Power Input & Current)	-	400	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
(Cl.11 of 302-2-21:2011)(Heating)	-	500	-
Cl.11 of 302-2-21:2018(Heating : Room Temp.)	-	500	-
Cl.11 of 302-2-21:2018(Heating : Temp of Rubber or PVC insulation of internal and external wiring)	-	500	-
Cl.11 of 302-2-21:2018(Heating : Temp of Walls, ceilings and floor of the test corner )	-	500	-
(Cl.13 of IS 302-2-21:2011)(Leakage Current )	-	500	-
(Cl.13 of IS 302-2-21:2011)(Electrical Strength at Operating Temperature)	-	500	-
Cl.13 of IS 302-2-21:2018(3 Strength at Operating Temperature)	-	500	-
Cl.13 of IS 302-2-21:2018(Leakage Current )	-	500	-
(Cl.14ofIS302-2-21:2011)(Transient Over Voltages)	-	1000	-
Cl.14 of IS 302-2-21:2018(Transient Over Voltages)	-	1000	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1500	-
(Cl.15 of IS 302-2-21-2011)(Moisture Resistance)	-	1500	-
Cl.15 of IS 302-2-21-2018(Moisture Resistance)	-	1500	-
Cl.15 of IS 2082:2018(Verification of the Rated Capacity)	-	500	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Leakage current )	-	500	-
(Cl.17 of IS 302-2-21:2011)(Overload protection of transformers & associated circuits)	-	1000	-
Cl.17 of IS 2082:2018(Hot Water Output)	-	2500	-
Cl.18 of IS 2082:2018( Reheating Time)	-	2500	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
(Cl.19 of IS 302-2-21:2011)(Abnormal Operation)	-	2000	-
Cl.19 of IS 2082:2018(Mixing Factor)	-	2500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : leakage from container during test)	-	500	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : High Voltage )	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Insulation of the supply cable or cord)	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : Wall ceiling temp. of test corner )	-	2000	-
Cl.19 of IS 302-2-21:2018(Abnormal Operation : emission of flame or molten metal or poisonous or ignitable gas )	-	2000	-
(Cl.20 of IS 302-2-21:2011)(Stability & Mechanical Hazards)	-	300	-
Cl.20 of IS 2082:2018(Deviation of Dial Calibration)	-	2500	-
Cl.20 of IS 302-1:2008(Stability & Mechanical Hazards)	-	300	-
(Cl.21ofIS302-2-21:2011)(Mechanical strength)	-	300	-
Cl.21 of IS 2082:2018(Cyclic Temperature Variation)	-	2500	-
Cl.21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	300	-
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	30	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 Of IS 302-2-21:2011)(Construction)	-	1500	-
(Cl.22 of IS 2082:2018)(Finish)	-	500	-
Cl.22 of IS 2082:2018(Finish)	-	500	-
Cl.22.111 of IS 302-2-21:2018(Construction : Resistance to vacuum )	-	1500	-
Cl.22.110 of IS 302-2-21:2018(Construction : meterial of connections )	-	1500	-
Cl.22.110 of IS 302-2-21:2018(Construction : Material of Inner conatiner )	-	1500	-
Cl.22.109 of IS 302-2-21:2018(Construction : Drain for appliance having a capacity of more than 15 liter)	-	1500	-
Cl.22.108 of IS 302-2-21:2018(Construction : fixing to wall )	-	1500	-
Cl.22.107 of IS 302-2-21:2018(Construction : Position of Heating elements and thermal control sensor)	-	1500	-
Cl.22.106 of IS 302-2-21:2018(Construction : Operation of thermal cut- out )	-	1500	-
Cl.22.104 of IS 302-2-21:2018(Construction : Outlet of open outlet heater )	-	1500	-
Cl.22.103 of IS 302-2-21:2018(Construction : Operation of Pressure relieve devices )	-	1500	-
Cl.22.102 of IS 302-2-21:2018(Construction : repeated drawing of water temp )	-	1500	-
Cl.22.101 of IS 302-2-21:2018(Construction : rated pressure of closed water heater )	-	1500	-
Cl.22.47 of IS 302-2-21:2018 (Construction : Water pressure test )	-	1500	-
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration of enclosure)	-	1500	-
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	1500	-
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	1500	-
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	1500	-
Cl.22.18 Of IS 302-1:2008(Construction : Resistance to corrosion )	-	1500	-
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	1500	-
Cl.22.14 of IS 302-1:2008(Construction : ragged or sharp edges)	-	1500	-
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts)	-	1500	-
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable part )	-	1500	-
Cl.22.7 of IS 302-1:2008(Construction: adequate safeguards against the risk of excessive pressure)	-	1500	-
Cl.22.6 of IS 302-2-21:2018(Construction : Size of drain hole )	-	1500	-
Cl.22.6 of IS 302-1:2008(Construction : Effect of water on 3 insulation )	-	1500	-
Cl.22.2 of IS 302-1:2008(Construction : Provision to ensure all pole disconnection )	-	1500	-
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	1500	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl.22 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl.22.108 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl.22.6 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl.22.47 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl.22.101 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl.22.103 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl.22.104 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl.22.105 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl.22.109 of IS 302-2-21:2018)(Constructions)	-	1500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
(Cl. 23 of IS 302-2-21: 2011)(Internal Wiring )	-	500	-
Cl. 23 of IS 302-1:2008(Internal Wiring : color identification for earthing conductor )	-	500	-
Cl. 23 of IS 302-1:2008(Internal Wiring )	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
(Cl.24ofIS302-221:2011)(Component)	-	500	-
Cl.24.102 of IS 302-221:2018(Component : Operation of thermal cut-out )	-	500	-
Cl.24.101 of IS302-221:2018(Component : Location of non self reseting thermal cut out )	-	500	-
Cl.24of IS 302-221:2018(Component : Relevent Indian standards )	-	500	-
(Cl.24.101 of IS 302-2-21:2018)(Components)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
(Cl.25 of IS 302-2-21:2011)(Supply Connection & External Flexible Cords)	-	500	-
Cl.25.18 of IS 302-1:2008(Supply Connection & External Flexible Cords)	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	500	-
Cl.25.15 of IS 302-1:2008(Supply Connection & External Flexible Cords : Cord grip test )	-	500	-
Cl.25.12 of IS 302-1:2008(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	500	-
Cl.25.10 of IS 302-1:2008(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	500	-
Cl.25.8 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	500	-
Cl.25.5 of IS 302-1:2008(Supply Connection & External Flexible Cords : Type of attachment )	-	500	-
Cl.25 of IS 302-2-21:2018(Supply Connection & External Flexible Cords : connection to the supply mains)	-	500	-
(Cl.25 of IS 302-2-21:2018)(Supply Connection and External Flexible cords)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
(Cl.26 of IS 302-2-21: 2011)(Terminals for External Conductors)	-	500	-
Cl.26 of IS 302-2-21: 2018(Terminals for External Conductors)	-	500	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	300	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	300	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	300	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	300	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	300	-
(Cl.27 of IS 302-2-21:2011)(Provision for Earthing)	-	300	-
Cl.27 of IS 302-2-21:2018(Provision for Earthing)	-	300	-
(Cl.28 of IS 302-2-21:2011)(Screws & Connections)	-	300	-
Cl.28 of IS 302-2-21:2018(Screws & Connections)	-	300	-
(Cl.29ofIS302-2-21:2011)(Clearances, Creepage Distances and Solid Insulation)	-	200	-
Cl.29.2 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	200	-
Cl.29.1 of IS 302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	200	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1000	-
(Cl.30 of IS 302-2-21:2011)(Resistance to Heat & Fire)	-	1000	-
Cl.30.2 of IS 302-1:2008(Resistance to Heat & Fire : Glow wire test )	-	1000	-
Cl.30.1 of IS 302-1:2008(Resistance to Heat & Fire : Ball pressure test )	-	1000	-
Cl.31 of IS 302-2-21:2018(Resistance to Rusting)	-	1000	-
(Cl.31 of IS 302-2-21:2011)(Resistance to Rusting)	-	1000	-
Cl.16 of IS 302-2-21-2018(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	500	-
Cl.27.5 of IS 302-1:2008(Provision for Earthing : ECR )	-	300	-
7.13(Marking : Official language of Instruction )	-	100	-
Cl.32 of IS 302-1:2008()	-	500	-
12(THERMOSTAT SETTING)	-	1000	-
Cl-10(Mounting of the water heater)	-	100	-
Cl-11(Measurements of stored water temperature)	-	100	-
Cl-12(Thermostat setting)	-	1000	-
Cl-13(Measurement of energy consumption)	-	2500	-
(Cl.16 of IS 2082:2018)(Standing Loss per 24 Hours)	-	2500	-

10 Jul, 2028

-
-

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

Closed / Open-Outlet/ Cistern-fed/ Cistern-type/Low-pre

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and Instructions)	-	100	-
8.0(Protection against access to live parts)	-	200	-
10.0(Input and Current)	-	400	-
11.0(Heating)	-	500	-
13.0(Leakage Current and electric strength at operating temperature)	-	500	-
14.0(Transient Overvoltage)	-	1000	-
15.0(Moisture resistance)	-	1500	-
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	500	-
19.0(Abnormal Operation)	-	2000	-
20.0(Stability and mechanical hazards)	-	300	-
21.0(Mechanical Strength)	-	300	-
22.0(Construction)	-	1500	-
23.0(Internal Wiring)	-	500	-
25.0(Supply Connection and External Flexible Cords)	-	500	-
26.0(Terminals for external conductors)	-	500	-
27.0(Provision For Earthing)	-	300	-
28.0(Screws and Connections)	-	300	-
29.0(Creepage Distances and Clearances)	-	200	-
30.0(Resistance To Heat and Fire)	-	1000	-
31.0(Resistance To Rusting)	-	1000	-
4(GENERAL REQUIREMENTS)	-	30000	-
5(GENERAL CONDITIONS FOR THE TESTS)	-	30000	-
6.0(Classification)	-	1000	-
17.0(Overload Protection of transformer and associated circuit)	-	1000	-
19.11.4.7(Harmonics)	-	500	-
19.11.4.6(Class 3 Voltage dips and interruptions)	-	500	-
19.11.4.5(Immunity to conducted discharges)	-	500	-
19.11.4.4(Surge immunity test)	-	500	-
19.11.4.3(Fast transient bursts)	-	500	-
19.11.4.2(Radiated fields)	-	500	-
19.11.4.1(Electrostatic discharges)	-	500	-
24(Components)	-	500	-
32(RADIATION TOXICITY AND SIMILAR HAZARDS)	-	500	-

10 Jul, 2028

-
Exclusion: Cl 19.11.4.1 - 19.11.4.7 (EMI/EMC)

Bureau of Indian Standards

The National Standards Body of India

NATIONAL TESTING BUREAU, GHAZIABAD

KHASRA NO- 883, OPP GALI NO. 9, MAMRAJ NAGAR, SIHANI ROAD,, GHAZIABAD, Ghaziabad, Uttar Pradesh, 201001

7669008004 ntbureau.gzb@yahoo.com

Scope List