BIS - LIMS (Laboratory Information Management System)

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

Plot No. 65, Phase-IV, Sector-57, HSIDC Industrial Area, Behind Parnami Hospital, Kundli,, SONIPAT, Sonipat, Haryana, 131028

9810442016 rohit@delhitesthouse.com

Scope List

Reset

64 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 18112 (2025)

DIGITAL TELEVISION RECEIVER FOR SATELLITE BROADCAST TRANSMISSION SPECIFICATION (First Revision)

410000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 4.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	10000	-
Clause 4.3(Specifications)	-	10000	-
Clause 4.5(Safety Requirements)	-	35000	-
Clause 4.6(Electromagnetic Compatibility (EMC) Requirements)	-	150000	-
Clause 5(Marking)	-	5000	-
Clause 6(Operating Life Test)	-	30000	-
Clause 4.1, Table-1, i) a)(Hardware specification)	-	3000	-
Clause 4.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	5000	-
Clause 4.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	5000	-
Clause 4.1, Table-1, i) d)(Decompression and decoding of audio)	-	5000	-
Clause 4.1, Table-1, i) e)(Active Format descriptors)	-	5000	-
Clause 4.1, Table-1, i) f)(Captioning and Sub-titling)	-	5000	-
Clause 4.1, Table-1, i) g)(Teletext)	-	5000	-
Clause 4.1, Table-1, i) h)(Multi-language support)	-	2000	-
Clause 4.1, Table-1, i) j)(DTV receiver mixed Audio Description)	-	5000	-
Clause 4.1, Table-1, i) k)(Broadcast mixed audio description)	-	5000	-
Clause 4.1, Table-1, i) m)(Service demultiplexing)	-	5000	-
Clause 4.1, Table-1, i) n)(Data services)	-	5000	-
Clause 4.1, Table-1, i) p)(OSD)	-	5000	-
Clause 4.1, Table-1, i) q)(DTV character set)	-	5000	-
Clause 4.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	5000	-
Clause 4.1, Table-1, i) s)(Time)	-	2000	-
Clause 4.1, Table-1, i) t)(Digital TV output)	-	2000	-
Clause 4.4, Table-2, i) b)(Frequency)	-	2000	-
Clause 4.4, Table-2, i) a)(Input voltage range)	-	2000	-
Clause 4.1,Table-1, ii) a)(Demodulation and FEC decoding)	-	5000	-
Clause 4.1, Table-1, ii) b)(DTV Receiver Installation)	-	2000	-
Clause 4.1, Table-1, ii) c)(Network evolution)	-	2000	-
Clause 4.4, Table-2, iii) c)(RF input impedance)	-	5000	-
Clause 4.1, Table-1, ii) d)(Services available)	-	2000	-
Clause 4.1, Table-1, ii) e)(Selection via Service List)	-	2000	-
Clause 4.1, Table-1, ii) f)(Selection via Numeric Entry)	-	2000	-
Clause 4.1, Table-1, ii) g)(Favourite Channel list)	-	2000	-
Clause 4.1, Table-1, ii) h)(Hidden Services)	-	2000	-
Clause 4.4, Table-2, iii) b)(Input frequency range)	-	5000	-
Clause 4.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	2000	-
Clause 4.1, Table-1, ii) k)(RF input signal)	-	3000	-
Clause 4.1, Table-1, ii) m)(LNB supply current)	-	5000	-
Clause 4.1, Table-1, ii) n)(LNB supply voltage)	-	3000	-
Clause 4.1, Table-1, ii) p)(LNB Control)	-	2000	-
Clause 4.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	2000	-
Clause 4.4, Table-2, iii) a)(Input level per carrier)	-	5000	-
Clause 4.4, Table-2, iv) c)(RF input impedance)	-	5000	-
Clause 4.4, Table-2, iv) b)(Input frequency range)	-	5000	-
Clause 4.4, Table-2, iv) a)(Input level per carrier)	-	5000	-
Clause 4.4, Table-2, v)(Symbol rate)	-	5000	-
Clause 4.4, Table-2, vi)(RF input return loss)	-	5000	-
Clause 4.4, Table-2, vii)(DisEqC)	-	2000	-
Clause 4.4, Table-2, viii)(Operating ambient temperature range)	-	2000	-
Clause 4.4, Table-2, ix)(Operating humidity range)	-	2000	-
Clause 4.1, Table-1, iii) a)(Interfaces, Connectors)	-	2000	-
Clause 4.1, Table-1, iv)(Automatic software upgrade mechanism)	-	2000	-
Clause 4.1, Table-1, v) a)(Remote Control)	-	2000	-
Clause 4.1, Table-1, v) b)(Easy to use and simple documentation)	-	2000	-
Clause 3.1, Table-1, v) c)(Support package)	-	2000	-

31 Dec, 2026

-
Included w.e.f. 31.07.2025

IS 398 : Part 5 (1992)

Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7 (elec)(Freedom from defects)	-	100	-
13.2 (mech)(Visual Examination)	-	100	-
13.3 Table-1 (mech)(Diameter-Aluminium wires)	-	200	-
13.3 Table-2 (mech)(Diameter-Galvanized Steel wires)	-	200	-
13.5.1 Table 3 (elec)(Breaking Load on Complete conductor)	-	700	-
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires Before Stranding)	-	100	-
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires Before Stranding)	-	100	-
13.5.2 Table 1 (mech)(Breaking Load of Aluminium Wires After Stranding)	-	700	-
13.5.2 Table 2 (mech)(Breaking Load of Steel Wires After Stranding)	-	300	-
13.6.1 (mech)(Ductility by Torsion Test before stranding)	-	100	-
13.6.1 (mech)(Ductility by Torsion Test after stranding)	-	500	-
13.6.2 (mech)(Ductility by Elongation Test before stranding)	-	100	-
13.6.2 (mech)(Ductility by Elongation Test after stranding)	-	500	-
13.7.1 (mech)(Wrapping Test Aluminium Wires Before Stranding)	-	100	-
13.7.1 (mech)(Wrapping Test Aluminium Wires After Stranding)	-	300	-
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	100	-
13.7.2 (mech)(Wrapping Test Galvanized Steel Wires After Stranding)	-	200	-
13.8 (elec)(Resistance test-Aluminium wire before Stranding)	-	500	-
14.8 (elec)(Resistance test-Aluminium wire after stranding)	-	2000	-
13.9.2 (chem)(Mass of Zinc coating)	-	500	-
13.9.2 (chem)(Uniformity of Zinc coating)	-	500	-
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Outermost Layer)	-	200	-
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	200	-
13.4 Table-4 (mech)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-	200	-
13.4 Table-4 (mech)(Lay Ratio- Steel Core (6 Wire Layer))	-	200	-
13.10 (elec)(Surface condition test)	-	3700	-
13.11 (elec)(Corona Test)	-	0	-
13.12 (elec)(Radio Interference Voltage Test)	-	0	-
10.4 (mech)(Direction of lay)	-	100	-
13.5.2 & Table 2 (mech)(Breaking load of steel wire before stranding)	-	100	-
13.9 (elec)(The test of galvanising)	-	100	-
8.2.1 (elec)(Size of complete conductor)	-	100	-
8.2.2 (elec)(Resistance of complete conductor)	-	1000	-
10.4 (elec)(Direction of lay)	-	100	-
13.5.2 & Table 2 (elec)(Breaking load of steel wire before stranding)	-	100	-
13.4 Table-4 (elec)(Lay Ratio- Aluminium Wire Outermost Layer)	-	200	-
13.4 Table-4 (elec)(Lay Ratio- Aluminium Wire Layer Immediately Beneath Outermost Layer)	-	200	-
13.4 Table-4 (elec)(Lay Ratio- Aluminium Wire Innermost Layer of Conductors eith 3 Aluminium Wire Layers)	-	200	-
13.4 Table-4 (elec)(Lay Ratio- Steel Core (6 Wire Layer))	-	200	-
13.9.2 (elec)(Uniformity of Zinc coating)	-	500	-
13.9.2 (elec)(Mass of Zinc coating)	-	500	-
13.7.2 (elec)(Wrapping Test Galvanized Steel Wires After Stranding)	-	200	-
13.7.2 (elec)(Wrapping Test Galvanized Steel Wires Before Stranding)	-	500	-
13.7.1 (elec)(Wrapping Test Aluminium Wires After Stranding)	-	300	-
13.7.1 (elec)(Wrapping Test Aluminium Wires Before Stranding)	-	100	-
13.6.2 (elec)(Ductility by Elongation Test after stranding)	-	500	-
13.6.2 (elec)(Ductility by Elongation Test before stranding)	-	100	-
13.6.1 (elec)(Ductility by Torsion Test after stranding)	-	500	-
13.6.1 (elec)(Ductility by Torsion Test before stranding)	-	100	-
13.5.2 Table 2 (elec)(Breaking Load of Steel Wires After Stranding)	-	300	-
13.5.2 Table 1 (elec)(Breaking Load of Aluminium Wires After Stranding)	-	700	-
13.5.2 Table 2 (elec)(Breaking Load of Steel Wires Before Stranding)	-	100	-
13.5.2 Table 1 (elec)(Breaking Load of Aluminium Wires Before Stranding)	-	100	-
13.3 Table-2 (elec)(Diameter-Galvanized Steel wires)	-	200	-
13.3 Table-1 (elec)(Diameter-Aluminium wires)	-	200	-
13.2 (elec)(Visual Examination)	-	100	-
13.2(Visual Examination)	-	100	-
13.2(Visual Examination)	-	100	-
13.3(Diameter(mm), Aluminium wire)	-	200	-
13.3(Diameter(mm), Aluminium wire)	-	200	-
13.3(Diameter(mm), Steel Wire)	-	100	-
13.3(Diameter(mm), Steel Wire)	-	100	-
10(Stranding)	-	100	-
10(Stranding, Direction of Outermost layer)	-	100	-
10(Stranding, Ratio of diameter of Aluminium)	-	100	-
10.2, table 4(Lay Ratio, Aluminium Wire Outer of Layer)	-	300	-
10.2, table 4(Lay Ratio, Aluminium Wire, Layer immediately)	-	200	-
10.2, table 4(Lay Ratio, Aluminium Wire, Inner most layer of three Aluminium wire)	-	250	-
10.2, table 4(Lay Ratio, Steel wire, (6 wire layar))	-	250	-
13.5.2(Breaking Load, Aluminium wire(Before Stranding))	-	100	-
13.5.2(Breaking Load, Steel wire (Before Stranding))	-	100	-
13.5.2(Breaking Load Steel wire (After Stranding))	-	300	-
13.5.2(Breaking Load Aluminium wire (After Stranding))	-	700	-
13.6("Ductility Test on steel wire, Torsion Test ")	-	500	-
13.6(Ductility Test on steel wire, Torsion Test)	-	500	-
13.6(Ductility Test on steel wire, Elongation Test)	-	500	-
13.6(Ductility Test on steel wire, Elongation Test)	-	500	-
13.7(Wrapping Test, Aluminium wire)	-	300	-
13.7(Wrapping Test, Steel wire)	-	300	-
13.9(Galvanizing Test on steel wire, uniformity of coating)	-	500	-
13.9(Galvanizing Test on steel wire, uniformity of coating)	-	500	-
13.9(Galvanizing Test on steel wire,Weight of zinc coating)	-	500	-
13.9(Galvanizing Test on steel wire,Weight of zinc coating)	-	500	-
9(Joint in wires,)	-	200	-
9(Joint in wires,)	-	200	-
13.1(Surface Condition Test)	-	3700	-
13.11(Corona Test)	-	0	-
13.12(Radio Interference Voltage Test)	-	0	-

31 Dec, 2026

-
Included w.e.f 28.07.2025 Exclusion: Cl 13.11 (Corona Test), Cl 13.12 (Radio Interference Voltage Test)

IS 14772 (2020)

Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations — General Requirements ( First Revision )

200000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Nature of material)	-	100	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
7.2(Type of installation)	-	100	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
7.3(Types of inlets)	-	100	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
7.4(Clamping means)	-	100	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
7.5(Minimum temperature during installation)	-	100	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
7.6, 7.7, 7.8(The degree of ingress protection)	-	300	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
7.9(The provision for fixing accessories to the boxes )	-	100	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
7.1(The method of fixing the terminals)	-	100	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
8.1(marking)	-	500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
8.2(By Inspection and The marking is rubbed by hand 15s width a piece of cloth soaked with water and again for 15s with a piece of cloth soaked with petroleum spirit.)	-	500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
8.3(BIS Certification Marking)	-	250	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
9.0(Dimensions)	-	500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
10.0(Protection against electric shock)	-	1250	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
11.0(PROVISION FOR EARTHING)	-	500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
12.0(Constructions)	-	2500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
13.0(Resistance to ingress of solid objects)	-	2500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
13.0(Resistance toharmful ingress of water)	-	2500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
13.0(Resistance to ageing)	-	1000	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
14.0(insultation resistance)	-	1000	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
14.0(electric strength)	-	1000	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
15.0(Mechanical strength)	-	3000	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
16.0(resistance to heat)	-	2000	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
17.0(creepage distance)	-	500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
17.0(clearances)	-	500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
17.0(distance through seating compund)	-	500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
18.0(Resistance to insulating material to abnormal heat and fire)	-	2000	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
19.0(Resistance to tracking)	-	1000	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
20.0(Resistance to corrosion)	-	500	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-
21.0(Electromagnetic compatibility (EMC))	-	175000	WITHOUT EMI/EMC CHARGES ARE RS. 25000/-

31 Dec, 2026

-
Included w.e.f 30.06.2025

IS 15787 (2008)

Switch - Socket - Outlets (Non - Interlock Type)

25300 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.30 IS 15787:2008(Additional tests on pins providing with insulating sleeves)	-	200	-
Cl.29 IS 15787:2008(Resistance to Rusting)	-	1000	-
Cl.28 IS 15787:2008(Resistance of insulating material to Abnormal Heat , To Fire & To tracking )	-	1500	-
Cl.27 IS 15787:2008(Creepage distance, clearances & Distance through sealing compounds)	-	500	-
Cl.26 IS 15787:2008(Screws, current carrying parts & connections)	-	2000	-
Cl.25 IS 15787:2008(Resistance to heat )	-	2000	-
Cl.24 IS 15787:2008(Mechanical strength)	-	2000	-
Cl.23 IS 15787:2008(Flexible cables & their connections)	-	500	-
Cl.22 IS 15787:2008(Force necessary to withdraw the plug )	-	500	-
Cl.21 IS 15787:2008(Normal operation )	-	3500	-
Cl.20 IS 15787:2008(Making & Breaking )	-	500	-
Cl.19 IS 15787:2008(Temperature rise )	-	500	-
Cl.18 IS 15787:2008(Operation of Earthing Contacts)	-	500	-
Cl.17 IS 15787:2008(Insulation resistance & electric strength )	-	1000	-
Cl.16 IS 15787:2008(Resistance to ageing,To harmful ingress of water and To Humidity)	-	1000	-
Cl.15 IS 15787:2008(Interlocked Socket-outlet )	-	500	-
Cl.14 IS 15787:2008(Construction of Plugs and Portable Socket- Outlet )	-	1000	-
Cl.13 IS 15787:2008(Construction of fixed socket outlet)	-	1500	-
Cl.12 IS 15787:2008(Terminals)	-	1500	-
Cl.11 IS 15787:2008(Provision for earthing )	-	500	-
Cl.10 IS 15787:2008(Protection against to electric shock )	-	1000	-
Cl.9 IS 15787:2008(Checking of dimension)	-	1000	-
Cl.8 IS 15787:2008(Marking )	-	500	-
Cl.7 IS 15787:2008(Classification)	-	500	-
Cl.6 IS 15787:2008(Ratings )	-	100	-

31 Dec, 2026

-
Included w.e.f 30.06.2025

IS 9283 (2024)

LINE OPERATED A.C. MOTORS FOR SUBMERSIBLE PUMPSETS - SPECIFICATION (THIRD REVISION)

11500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
As Per Clause 5.1.2 Table 1(Material)	-	100	-
As Per Clause 5.1.3(Construction-General)	-	100	-
As per Clause 5.1.4(Construction-General)	-	100	-
As per Clause 5.2.1(Earthing)	-	100	-
As per Clause 5.4.1(Construction-Type of cable & Size of conductor of cable)	-	100	-
As per Clause 5.4.2(Construction-Length of cable)	-	100	-
As per Clause 5.4.3(Construction-Joint in Cable)	-	100	-
As per Clause 5.5(Finish of Bearings)	-	100	-
As per Clause 5.6(Balancing of Rotor)	-	100	-
As per Clause 7.1(Dimensions of Motors)	-	100	-
As per Clause 7.2(Tolerances)	-	100	-
As per Clause 12.1(Efficiency)	-	500	-
As per Clause 12.1(Efficiency)	-	500	-
As per Clause 13(Terminal Marking)	-	100	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.1(Rating Plate)	-	1000	-
As per Clause 15.2(Rating Plate)	-	500	-
As per Clause 16.1(a),21(Insulationresistance test(Before HV Test))	-	750	-
As per Clause 16.1(a),21(Insulationresistance test(After HV Test))	-	750	-
As per Clause 16.1(b),20(High voltage test)	-	750	-
As per Clause 16.[c](Measurement of stator resistance)	-	500	-
As per Clause 16.(d)(No Load Test)	-	500	-
As per Clause 16.(e)(Reduced voltage running up test at no load)	-	250	-
As per Clause 16.(f)(Locked rotor readings of voltage, current, power input and torque of motors)	-	250	-
As per Clause 16.(g)(Full load reading of voltage, current, power input, speed and frequency)	-	2000	-
As per Clause 16.(h),11(Performance characteristics)	-	500	-
As per Clause 16.(j),19(Temperature rise test at rated voltage)	-	500	-
As per Clause 16.(k),19(Temperature rise test at reduced voltage)	-	500	-
As per Clause 16.(m),18(Momentary Overload Test)	-	800	-
As per Clause 16.(n),22(Leakage Current Test at rated voltage at no load)	-	250	-

31 Dec, 2026

-
Included w.e.f 23.06.2025

IS 3315 (2024)

Direct Evaporative Air Cooler â Specification (Fourth Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(Enclosure)	-	4000	-
Cl-5.2(Filter Pads)	-	750	-
Cl-5.3(Sump Tank Capacities)	-	1500	-
Cl-5.4(Blower/Fan)	-	1000	-
Cl-5.4.3(Fan motor)	-	1000	-
Cl-5.5(Pump Set)	-	1000	-
Cl-5.6.1(Electrical wiring and connection)	-	2500	-
Cl-5.6.2(Suitable power cable)	-	1000	-
Cl-5.7(Switches)	-	250	-
Cl-6(Rating Requirement)	-	1000	-
Cl-8.1(Performance Requirement)	-	3000	-
Cl-8.2(Sound Test)	-	5000	-
Cl-8.3(Air Delivery (Air Flow) Test)	-	15000	-
Cl-8.4(Cooling Efficiency Test)	-	12000	-
Cl-8.5(Power Consumption)	-	2000	-
Cl-8.6(EER Calculation Method)	-	2000	-
Cl-8.7(Drop Test)	-	5000	-
Cl-8.8(Air Cooler Blower/Fan Reliability Test)	-	2000	-
Cl-12.2.1(General Running Tests)	-	1000	-
Cl-12.2.2(Protection against Electric Shock)	-	1500	-
Cl-12.2.3(High Voltage Tests)	-	2500	-
Cl-12.2.4(Leakage Current)	-	2500	-
Cl-12.2.5(Provision for Earthing)	-	2500	-
Cl-12.2.6(Finish)	-	1000	-
Cl-13(Additional Requirement for ECO-Mark)	-	1000	-
Cl-14(Storage)	-	3000	-

31 Dec, 2026

-
Included w.e.f.28.07.2025

IS 18112 (2022)

Digital Television Receiver for Satellite Broadcast Transmission Specification

400000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.4, Table-2, ii)(RF characteristics to be supported by the DTV receiver)	-	10000	-
3.3(Specifications)	-	10000	-
3.5(Safety specification)	-	35000	-
3.6(Electromagnetic Compatibility (EMC) Requirements)	-	150000	-
4(Marking)	-	5000	-
5(Operating Life Test)	-	30000	-
3.1, Table-1, i) a)(Hardware specification)	-	2000	-
3.1, Table-1, i) b)(Decompression and decoding of SDTV video)	-	5000	-
3.1, Table-1, i) c)(Decompression and decoding of HDTV video)	-	5000	-
3.1, Table-1, i) d)(Decompression and decoding of audio)	-	5000	-
3.1, Table-1, i) e)(Active Format descriptors)	-	5000	-
3.1, Table-1, i) f)(Captioning and Sub-titling)	-	5000	-
3.1, Table-1, i) g)(Teletext)	-	5000	-
3.1, Table-1, i) h)(Multi-language support)	-	2000	-
3.1, Table-1, i) j)(DTV receiver mixed Audio Descriptio)	-	5000	-
3.1, Table-1, i) k)(Broadcast mixed audio description)	-	5000	-
3.1, Table-1, i) m)(Service demultiplexing)	-	5000	-
3.1, Table-1, i) n)(Data services)	-	5000	-
3.1, Table-1, i) p)(OSD)	-	5000	-
3.1, Table-1, i) q)(DTV Receiver character set)	-	5000	-
3.1, Table-1, i) r)(Electronic Service Guide (ESG) ‘Now/Next’)	-	5000	-
3.1, Table-1, i) s)(Time)	-	2000	-
3.1, Table-1, i) t)(Digital TV output)	-	2000	-
3.4, Table-2, i) b)(Frequency)	-	2000	-
3.4, Table-2, i) a)(Input voltage range)	-	2000	-
3.1, Table-1, ii) a)(Demodulation and FEC decoding)	-	5000	-
3.1, Table-1, ii) b)(DTV Receiver Installation)	-	2000	-
3.1, Table-1, ii) c)(Network evolution)	-	2000	-
3.4, Table-2, iii) c)(RF input impedance)	-	5000	-
3.1, Table-1, ii) d)(Services available)	-	2000	-
3.1, Table-1, ii) e)(Selection via Service List)	-	2000	-
3.1, Table-1, ii) f)(Selection via Numeric Entry)	-	1000	-
3.1, Table-1, ii) g)(Favourite Channel list)	-	1000	-
3.1, Table-1, ii) h)(Hidden Services)	-	1000	-
3.4, Table-2, iii) b)(Input frequency range)	-	5000	-
3.1, Table-1, ii) j)(Logical Channel Number for Satellite services)	-	1000	-
3.1, Table-1, ii) k)(RF input signal)	-	2000	-
3.1, Table-1, ii) m)(LNB supply current)	-	2000	-
3.1, Table-1, ii) n)(LNB supply voltage)	-	2000	-
3.1, Table-1, ii) p)(LNB Control)	-	2000	-
3.1, Table-1, ii) q)(Modulation/Demodulation parameters for DVB-S & DVB-S2 standard)	-	2000	-
3.4, Table-2, iii) a)(Input level per carrier)	-	5000	-
3.4, Table-2, iv) c)(RF input impedance)	-	5000	-
3.4, Table-2, iv) b)(Input frequency range)	-	5000	-
3.4, Table-2, iv) a)(Input level per carrier)	-	5000	-
3.4, Table-2, v)(Symbol rate)	-	2000	-
3.4, Table-2, vi)(RF input return loss)	-	5000	-
3.4, Table-2, vii)(DisEqC)	-	2000	-
3.4, Table-2, viii)(Operating ambient temperature range)	-	1000	-
3.4, Table-2, ix)(Operating humidity range)	-	1000	-
3.4, Table-2, x)(Power consumption)	-	5000	-
3.1, Table-1, iii) a)(Interfaces, Connectors)	-	2000	-
3.1, Table-1, iv)(Automatic software upgrade mechanism)	-	2000	-
3.1, Table-1, v) a)(Remote Control)	-	2000	-
3.1, Table-1, v) b)(Easy to use and simple documentation)	-	2000	-
3.1, Table-1, v) c)(Support package)	-	2000	-

31 Dec, 2026

-
Included w.e.f 06.06.2025

IS 613 (2000)

Copper rods and bars for electrical purposes - Specification (Third Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause no.3(SUPPLY OF MATERIAL)	-	50	-
Clause no.6(FREEDOM FROM DEFECTS)	-	200	-
Clause no.7(CONDITION OF SUPPLY)	-	50	-
Clause no.8(CHEMICAL COMPOSITION)	-	4000	-
Clause no.9.1, table no,1(" tensile test ")	-	2100	-
Clause no.9.2(Bend test)	-	400	-
"Clause no.10.1 and 11.1.1 Table No. 2"(Dimensions and Tolerances)	-	400	-
"Clause no.10.2 and Table No. 3"("Tolerances on Length of Bar Rod in Straight Length ")	-	250	-
"Clause no.10.4 and Table No. 4"(Corner Radius and Tolerances)	-	250	-
"Clause no.11 and Table No. 5"(Electrical Resistivity)	-	2100	-
Clause no. 13(packing)	-	50	-
Clause no. 14(Marking)	-	150	-
Clause no.3(SUPPLY OF MATERIAL)	-	50	-
Clause no.6(FREEDOM FROM DEFECTS)	-	200	-
Clause no.7(CONDITION OF SUPPLY)	-	50	-
Clause no.8(CHEMICAL COMPOSITION)	-	4000	-
Clause no.9.1, table no,1(" tensile test ")	-	2100	-
Clause no.9.2(Bend test)	-	400	-
"Clause no.10.1 and 11.1.1 Table No. 2"(Dimensions and Tolerances)	-	400	-
"Clause no.10.2 and Table No. 3"("Tolerances on Length of Bar Rod in Straight Length ")	-	250	-
"Clause no.10.4 and Table No. 4"(Corner Radius and Tolerances)	-	250	-
"Clause no.11 and Table No. 5"(Electrical Resistivity)	-	2100	-
Clause no. 13(packing)	-	50	-
Clause no. 14(Marking)	-	150	-
Clause no.3(SUPPLY OF MATERIAL)	-	50	-
Clause no.6(FREEDOM FROM DEFECTS)	-	200	-
Clause no.7(CONDITION OF SUPPLY)	-	50	-
Clause no.8(CHEMICAL COMPOSITION)	-	4000	-
Clause no.9.1, table no,1(" tensile test ")	-	2100	-
Clause no.9.2(Bend test)	-	400	-
"Clause no.10.1 and 11.1.1 Table No. 2"(Dimensions and Tolerances)	-	400	-
"Clause no.10.2 and Table No. 3"("Tolerances on Length of Bar Rod in Straight Length ")	-	250	-
"Clause no.10.4 and Table No. 4"(Corner Radius and Tolerances)	-	250	-
"Clause no.11 and Table No. 5"(Electrical Resistivity)	-	2100	-
Clause no. 13(packing)	-	50	-
Clause no. 14(Marking)	-	150	-

31 Dec, 2026

-
Included w.e.f.02.06.2025

IS 6162 : Part 2 (1971)

Specification for paper covered aluminium conductors: Part 2 rectangular conductors

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
10.2 a(Conductor dimensions)	-	2500	-
10.2 b(Arrangement of Paper layers)	-	1500	-
10.2 c(Increase in dimension)	-	2500	-
10.2 d(Overall dimension)	-	3500	-
Cl. No. 10.2 a(Conductor dimensions)	-	2500	-
Cl. No. 10.2 b(Arrangement of Paper layers)	-	1500	-
Cl. No. 10.2 c(Increase in dimension)	-	2500	-
Cl. No. 10.2 d(Overall dimension)	-	3500	-

31 Dec, 2026

-
Included w.e.f.28.07.2025

IS 6162 : Part 1 (1971)

Specification for paper - Covered aluminium conductors: Part 1 round conductors

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2(Diameter)	-	1000	-
4.3(Resistance)	-	2500	-
4.4(Tensile strength and Elongation)	-	1500	-
6.3(Arrangement of Paper layers)	-	1000	-
7(Overall diameter and increase in diameter)	-	1500	-
Cl. No. 4.2(Diameter)	-	1000	-
Cl. No. 4.3(Resistance)	-	2500	-
Cl. No.4.4(Tensile strength and Elongation)	-	1500	-
Cl. No. 6.3(Arrangement of Paper layers)	-	1000	-
Cl. No. 7(Overall diameter and increase in diameter)	-	1500	-
Cl. No. 10.2 a(Conductor dimensions)	-	1000	-
4.5(IS 6162 Part-1)	-	1000	-
4.6(IS 6162 Part-1)	-	200	-
4.7(IS 6162 Part-1)	-	300	-

31 Dec, 2026

-
Included w.e.f 20.05.2025

IS 17046 (2018)

Fibre Optic Cable for Cable TV Application

125000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
3.1(Design and construction of aerial metal free optical fibre cable)	-	0	-
3.2(Fibre used in the cable)	-	0	-
3.3(Self-supporting metal free aerial optical fibre cable)	-	0	-
3.4(Technical Requirements)	-	4500	-
3.5(Mechanical Characteristics)	-	4500	-
3.6(Environmental Characteristic of Fibre)	-	4500	-
3.7(Optical Fibre Cable Construction Specifications)	-	1000	-
3.8(Mechanical Characteristics and Tests on Optical Fibre Cable)	-	110000	-
4(Marking)	-	500	-
3.1(Design and construction of aerial metal free optical fibre cable)	-	0	-
3.2(Fibre used in the cable)	-	0	-
3.3(Self-supporting metal free aerial optical fibre cable)	-	0	-
3.4(Technical Requirements)	-	4500	-
3.5(Mechanical Characteristics)	-	4500	-
3.6(Environmental Characteristic of Fibre)	-	4500	-
3.7(Optical Fibre Cable Construction Specifications)	-	1000	-
3.8(Mechanical Characteristics and Tests on Optical Fibre Cable)	-	110000	-
4(Marking)	-	500	-

31 Dec, 2026

-
Included w.e.f.02.06.2025

IS 17293 (2020)

Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c.

1050000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	1500	Except long duration tests
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2500	Except long duration tests
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2500	Except long duration tests
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	14500	Except long duration tests
IS 191 : 2007, IS 440(Copper purity test)	-	5000	Except long duration tests
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	5000	Except long duration tests
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	1500	Except long duration tests
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	12500	Except long duration tests
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	125000	Except long duration tests
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2500	Except long duration tests
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	10000	Except long duration tests
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	Except long duration tests
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	2000	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	32500	Except long duration tests
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	1500	Except long duration tests
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	350000	Except long duration tests
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	15000	Except long duration tests
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	3500	Except long duration tests
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	Except long duration tests
Annex - B of IS 17293:2020(Compatibility test)	-	500	Except long duration tests
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	Except long duration tests
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2500	Except long duration tests
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	6500	Except long duration tests
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	10000	Except long duration tests
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	15000	Except long duration tests
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	32500	Except long duration tests
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	15000	Except long duration tests
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	350000	Except long duration tests
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	2500	Except long duration tests
Annex - B of IS 17293:2020(Compatibility test)	-	2500	Except long duration tests
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	7500	Except long duration tests
Annex - E of IS 17293 : 2020(UV resistance)	-	95000	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	5000	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	5000	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	17500	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	17500	Except long duration tests
11.2.2(Spark Test)	-	2500	Except long duration tests
11.2.4(Long-term Resistance of Insulation to d.c.)	-	30000	Except long duration tests
11.2.5(Surface Resistance of Sheath)	-	2500	Except long duration tests
11.3.1(Sheath Colour)	-	500	Except long duration tests
11.3.2(Sheath Marking)	-	800	Except long duration tests
11.3.3(Overall Diameters and Ovality)	-	1500	Except long duration tests
Annex J(Assessment of Halogens)	-	32500	Except long duration tests
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	2500	Except long duration tests
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	7500	Except long duration tests
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	7500	Except long duration tests
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	350000	Except long duration tests
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	13500	Except long duration tests
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	13500	Except long duration tests
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	3500	Except long duration tests
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	2500	Except long duration tests
5.2(Application to the Conductor)	-	1200	Except long duration tests
5.3(Thickness)	-	1500	Except long duration tests
6.2(Sheath application)	-	500	Except long duration tests
6.3(Sheath Thickness)	-	1500	Except long duration tests
6.4(Sheath Colour)	-	500	Except long duration tests
7(Overall Dimension)	-	1500	Except long duration tests
8.1(Continuity of Marking)	-	750	Except long duration tests
8.2(Durability)	-	500	Except long duration tests
8.3(Legibility)	-	500	Except long duration tests
9(Core Identification)	-	500	Except long duration tests
12(Packing and Marking)	-	750	Except long duration tests
4.1(Resistance)	-	500	Except long duration tests
7.1.2.1, 7.2.3(Annealing)	-	2500	Except long duration tests
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	10500	Except long duration tests
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	1500	Except long duration tests
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	2500	Except long duration tests
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2500	Except long duration tests
Annex G and Table 3 of IS 17293:2020(Ozone Resistance test)	-	14500	Except long duration tests
IS 191 : 2007, IS 440(Copper purity test)	-	5000	Except long duration tests
Table 3 of IS 17293:2020 & IS 10810 (Part 63)(Smoke density test.)	-	5000	Except long duration tests
Cl 6.4.3 and Table 3 of IS 8130(Diameter of wire in conductor)	-	1500	Except long duration tests
Table-3 & Annex-F of IS 17293:2020 and IS 10810 (Part 7) 1984(Elongation at low temperature (Cold Elongation))	-	12500	Except long duration tests
Annex H and Table 3 of IS 17293:2020(Damp Heat test)	-	125000	Except long duration tests
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2500	Except long duration tests
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	10000	Except long duration tests
Cl 11.2.3 & Table-3 of IS 17293:2020 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	5000	Except long duration tests
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	2000	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(IS 17293)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	32500	Except long duration tests
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(IS 10810-30)	-	1500	Except long duration tests
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	350000	Except long duration tests
Annex D and Table 3 of IS 17293:2020(Dynamic Penetration test)	-	15000	Except long duration tests
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	3500	Except long duration tests
Annex C of IS 17293:2020 & IS:10810 (Part 21)-1984(Cold impact test)	-	5000	Except long duration tests
Annex - B of IS 17293:2020(Compatibility test)	-	500	Except long duration tests
Table 3 of IS 17293:2020 & IS:10810 (Part 20)-1984(Cold bend test)	-	5000	Except long duration tests
Cl. 5.3, 6.3 & Table 1 & 2 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	2500	Except long duration tests
Cl 5.3 of IS 17048:2018 & IS:10810 (Part 53)-1984(Flammability Test)	-	6500	Except long duration tests
Annex A of IS 17293-2020, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	10000	Except long duration tests
Cl 11.2.1 of IS 17293:2020 & IS:10810 (Part 45)-1984(High voltage test)	-	5000	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	15000	Except long duration tests
Annex B of IS 17293:2020 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	10000	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(pH)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Conductivity)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(HCl and HBr)	-	32500	Except long duration tests
Annex J (J-1, J-2, J-3 & J-4) of IS 17293:2020(Presence of Fluorine / Fluorine Content (if required))	-	32500	Except long duration tests
Annex B of IS 17293:2020 & IS:10810 (Part 30)-1984(Hot set test)	-	15000	Except long duration tests
"Annex B of IS 17293:2020 & IS:8504-1:2012 and IS: 8504-2: 2013"(Thermal endurance test)	-	350000	Except long duration tests
Annex- I, Annex-B, Table-11 of IS 17293:2020 and IS 10810 (Part 1) : 1984(Sheath resistance against acid and alkaline solution)	-	2500	Except long duration tests
Annex - B of IS 17293:2020(Compatibility test)	-	2500	Except long duration tests
Table 3 of IS 17293:2020 & IS:10810 (Part 12)-1984(Shrinkage test)	-	7500	Except long duration tests
Annex - E of IS 17293 : 2020(UV resistance)	-	95000	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(pH)	-	5000	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Conductivity)	-	5000	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(HCl and HBr)	-	17500	Except long duration tests
Cl 5.7 & Annex D (D.1, D.2, D.3, D.4) of IS 17048:2018.(Presence of Fluorine / Fluorine Content (if required))	-	17500	Except long duration tests
11.2.2(Spark Test)	-	2500	Except long duration tests
11.2.4(Long-term Resistance of Insulation to d.c.)	-	30000	Except long duration tests
11.2.5(Surface Resistance of Sheath)	-	2500	Except long duration tests
11.3.1(Sheath Colour)	-	500	Except long duration tests
11.3.2(Sheath Marking)	-	800	Except long duration tests
11.3.3(Overall Diameters and Ovality)	-	1500	Except long duration tests
Annex J(Assessment of Halogens)	-	32500	Except long duration tests
5.1, 6.1, Table 11, 1.1(Properties before ageing b)	-	2500	Except long duration tests
5.1, 6.1, Table 11, 1.2(Properties after ageing in oven)	-	7500	Except long duration tests
5.1, 6.1, Table 11, 1.3(Hot set test b)	-	7500	Except long duration tests
5.1, 6.1, Table 11, 1.4(Thermal endurance Test conditions b)	-	350000	Except long duration tests
5.1, 6.1, Table 11, 1.5(Bending at low temperature)	-	13500	Except long duration tests
5.1, 6.1, Table 11, 1.6(Elongation at low temperature Insulated conductor/cable overall diameter)	-	13500	Except long duration tests
5.1, 6.1, Table 11, 1.7(Sheath resistance against acid and alkaline solution)	-	3500	Except long duration tests
5.1, 6.1, Table 11, 1.8(Compatibility test)	-	2500	Except long duration tests
5.2(Application to the Conductor)	-	1200	Except long duration tests
5.3(Thickness)	-	1500	Except long duration tests
6.2(Sheath application)	-	500	Except long duration tests
6.3(Sheath Thickness)	-	1500	Except long duration tests
6.4(Sheath Colour)	-	500	Except long duration tests
7(Overall Dimension)	-	1500	Except long duration tests
8.1(Continuity of Marking)	-	750	Except long duration tests
8.2(Durability)	-	500	Except long duration tests
8.3(Legibility)	-	500	Except long duration tests
9(Core Identification)	-	500	Except long duration tests
12(Packing and Marking)	-	750	Except long duration tests
4.1(Resistance)	-	500	Except long duration tests
7.1.2.1, 7.2.3(Annealing)	-	2500	Except long duration tests
Table 3, (IS 10810 Part 53)(Test for vertical flame propagation on complete cable)	-	10500	Except long duration tests

31 Dec, 2026

-
Included w.e.f.02.06.2025

IS 17505 : Part 1 (2021)

Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc

135000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2500	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	1500	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2000	-
IS 191:2007 & IS 440(Copper purity test)	-	2000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	1500	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	2500	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	3500	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	2500	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	2000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	1500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	7500	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	1000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	3000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	2500	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	3000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	3000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	7500	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	1500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	3000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	1250	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	3500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	3000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	2000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	1000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	1500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	1000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	3000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	3000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	45000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	1000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	3000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	3000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	3000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	3000	-
Cl. 7.3, Table 1 to 5 of IS 8130:2013 & IS:10810 (Part 5)-1984(Conductor Resistance Test)	-	2500	-
Cl. 7.1.2 of IS 8130 : 2013 & IS:10810 (Part 1)-1984(Annealing Test (for copper))	-	1500	-
Cl. 7.1.1 of IS 8130:2013 & IS:10810 (Part 4)-1984(Persulphate Test for tinned copper)	-	2000	-
IS 191:2007 & IS 440(Copper purity test)	-	2000	-
Cl. 11,14,16, Table 4 and Table 6 of IS 17505 & IS:10810 (Part 6)-1984(Test for overall dimensions and thickness of insulation and sheath)	-	1500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 36)-1984(Diameter of armour Wire)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 37)-1984(Tensile strength and elongation at break)	-	1000	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 38)-1984(Torsion Test on galvanised steel wire for armouring)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 39)-1984(Winding Test for Formed Wires)	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 40)-1984(Uniformity of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	500	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 41)-1984(Mass of Zinc coating on Round Steel Wires and Formed Steel Wires (Strips))	-	750	-
Table 7 of IS 17505-1:2021, IS 3975:1999 & IS:10810 (Part 42)-1984(Resistivity test)	-	1500	-
Table 1 and Table 2 of IS 17505 -1: 2021, IS:10810 (Part 7)-1984 & IS:10810 (Part 11)-1984(Tensile Strength and elongation at break before and after ageing.)	-	2500	-
Cl 18.2 of IS 17505-1:2021 & IS:10810 (Part 45)-1984(High voltage test)	-	3500	-
Table 1 of IS 17505-1 :2021 & IS:10810 (Part 43)-1984(Insulation Resistance)	-	2500	-
Cl. 18.6 of IS 17505-1:2021 & IS:10810 (Part 58)-1998(Oxygen index)	-	3000	-
Cl. 18.7 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table-1 & Table-2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	2000	-
Specification for thermosetting insulated fire survival cables for fixed installation having low emission of smoke and corrosive gases when affected by fire for working voltages upto and including 1100 V A.C. and 1500 V D.C(Hot deformation)	-	1500	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Table-1 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Table 1 of IS 17505-1: 2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 30)-1984(Hot set test)	-	2500	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone Resistance test)	-	7500	-
Cl 18.5.1 of IS 17505-1 :2021 & IS:10810 (Part 61)-1988(Flame test on single cable)	-	1000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	3000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	2000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	2000	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 7)-1984(Tensile strength and elongation at break.)	-	2500	-
Tabel 1 and 2 of IS 17505-1:2021 & IS:10810 (Part 11)-1984(Ageing in air oven.)	-	3000	-
Cl 18.6 of IS 17505-1: 2021 & IS:10810 (Part 58)-1998(Oxygen Index.)	-	3000	-
Cl 18.8 of IS 17505-1:2021 & IS:10810 (Part 64)-2003(Temperature Index)	-	3000	-
Table 1 & 2 of IS 17505-1: 2021 & IS:10810 (Part 13)-1984(Ozone resistance test)	-	7500	-
Table 2 of IS 17505-1:2021 & IS:10810 (Part 15)-1984(Hot deformation)	-	1500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(pH)	-	3000	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Conductivity)	-	1250	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(HCl and HBr)	-	3500	-
Cl 7 & Annex-F (F.1, F.2, F.3 F.4) of IS 17505-1 :2021(Presence of Fluorine / Fluorine Content (if required))	-	3000	-
Table 1 of IS 17505-1:2021 & IS:10810 (Part 12)-1984(Shrinkage test)	-	1000	-
Cl 18.2of IS 17505-1:2021 & IS:10810 (Part 45)-1984.(High Voltage test.)	-	2000	-
Cl 18.5of IS 17505-1:2021 & IS:10810 (Part 53)-1984(Flammability Test)	-	1000	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 20)-1984(Cold bend test)	-	1500	-
Table-2 of IS 17505-1:2021 & IS:10810 (Part 21)-1984(Cold impact test)	-	1500	-
Cl 18.5 of IS 17505-1:2021 & IS:10810 (Part 61)-1988(Flammability Test)	-	1000	-
Cl 18.9 of IS 17505-1:2021(Water immersion test ( effect of water on sheath of cable))	-	3000	-
Cl 18.8 of IS 17505-1:2021& IS:10810 (Part 63)-1993(Smoke density test)	-	3000	-
Cl. 3.5, 18.4 & Annex-E of IS 17505-1:2021(Circuit integrity test under fire)	-	45000	-
Cl. 17.1 Table 9 (iv) e(Heat Shock)	-	1000	-
Cl. 17.1 Table 9 (iv) h(Water absorption (Gravimetric))	-	3000	-
Cl. 17.1 Table 9 (vii) b(Flame test on bunched cable)	-	3000	-
Cl. 17.1 Table 9 (ix)(Abrasion resistance test)	-	3000	-
Cl. 17.1 Table 9 (iv) m(Assessment of Halogen (HCl))	-	3000	-

31 Dec, 2026

-
Included w.e.f.02.06.2025

IS 398 : Part 6 (2021)

Aluminium Conductors For Overhead Transmission Purposes Part 6: High conductivity aluminium alloy stranded conductors

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.2(Visual Examination)	-	1000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.3, Table 4(Measurement of Lay Ratio / Direction of Lay)	-	5000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.4, Table 2(Measurement of Diameter of Individual Aluminium Alloy Wires)	-	12000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.5, Table 2(Breaking Load Test - before stranding)	-	2000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.5, Table 2(Breaking Load Test - after stranding)	-	15000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.6, Table 1(Elongation Test - before stranding)	-	2000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.6, Table 1(Elongation Test - after stranding)	-	5000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.7, Table 2(Resistivity Test)	-	13000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.8(Wrapping Test)	-	5000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
11(Stranding)	-	3000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
8(Freedom from defects)	-	2000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.9, Table 3(Ultimate Tensile Strength on Stranded Conductor)	-	20000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.10, Table 3(d.c. Resistance Test on Stranded Conductor)	-	15000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-
16.11(Stress-strain Test)	-	35000	Up to 80 mm² = RS. 10000/- Above 80 mm² to 200 mm² = RS. 100000/- Above 200 mm² to 276 mm² = RS. 125000/- Above 276 mm² to 744 mm² = RS. 150000/-

31 Dec, 2026

-
Included w.e.f 07.05.2025

IS 398 : Part 3 (1976)

Specification for aluminium conductors for overhead transmission purposes: Part 3 aluminium conductors, aluminized steel reinforced (Second Revision)

18000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.6(Aluminizing Test)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
7.2.2 Table 3(Resistance test-Aluminium wire Calculated Resistance)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
12.5 Table 1(Resistance test-Aluminium wire after stranding)	-	750	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
12.5 Table 1(Resistance test-Aluminium wire before Stranding)	-	750	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
12.4.2(Wrapping TestAluminized Steel Wires After Stranding)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
12.4.2(Wrapping Test Aluminized Steel Wires Before Stranding)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
12.4.1(Wrapping Test Aluminium Wires After Stranding)	-	250	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
12.4.1(Wrapping Test Aluminium Wires Before Stranding)	-	250	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
12.3.2(Ductility by Elongation Test after stranding)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
12.3.2(Ductility by Elongation Test before stranding)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
12.3.1(Ductility by Torsion Test after stranding)	-	250	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
12.3.1(Ductility by Torsion Test after stranding)	-	250	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
12.3.1(Ductility by Torsion Test before stranding)	-	250	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
12.3.1(Ductility by Torsion Test before stranding)	-	250	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
12.2 Table 2(Breaking Load of aluminized steel wires After Stranding)	-	750	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
12.2 Table 1(Breaking Load of Aluminium Wires After Stranding)	-	750	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
12.2 Table 2(Breaking Load of aluminized steel wires Before Stranding)	-	750	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
12.2 Table 1(Breaking Load of Aluminium Wires Before Stranding)	-	750	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
9.5(STRANDING)	-	200	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
9.4(STRANDING)	-	200	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
9.3 Table 4(STRANDING)	-	200	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
9.2 Table 4(STRANDING : Lay Ratio For Steel Core)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
9.2 Table 4(STRANDING : Lay Ratio For Aluminium Wire)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
9.2 Table 4(STRANDING : Lay Ratio For Aluminium Wire)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
9.2 Table 4(STRANDING : Lay Ratio For Aluminium Wire)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
8.2(JOINTS IN WIRES : Aluminized Steel Wires)	-	200	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
8.1(JOINTS IN WIRES : Aluminium Wires)	-	200	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
7.1.2.2 Table 2(Diameter of Alumized Steel Wires After Stranding)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
7.1.2.1 Table-1(Diameter of Aluminium Wires After Stranding)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
7.1.2.2 Table 2(Diameter of Alumized Steel Wires Before Stranding)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
7.1.2.1 Table-1(Diameter of Aluminium Wires Before Stranding)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
Cl-7.1.1, Table-1(DIAMETER)	-	1000	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
Cl-7.1.1, Table-1(CROSS SECTIONAL AREA OF NOMINAL DIAMETER WIRE)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
Cl-7.1.1, Table-1(MASS)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
Cl-7.1.1, Table-1(RESISTANCE AT 20°C, Max)	-	1000	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
Cl. 7.1.1, Table 1(BREAKING LOAD, Min- Before Stranding)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands
Cl.- 7.1.1, Table 1(BREAKING LOAD, Min-After Stranding)	-	500	RS. 10000/- For 7 Strands RS. 11000/- For 13 Strands RS. 14000/- For 37 Strands RS. 15500/- For 49 Strands RS. 18000/- For 61 Strands

31 Dec, 2026

-
Included w.e.f 07.05.2025

IS 9997 (2023)

ALUMINIUM ALLOY REDRAW RODS FOR ELECTRICAL PURPOSES - SPECIFICATION

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-5.1(General requirements)	-	500	-
Cl-5.2(Redraw rods)	-	500	-
Cl-6(Manufacture)	-	450	-
Cl-7.1, Table-2 (i)(Silicon)	-	400	-
Cl-7.1, Table-2 (ii)(Iron)	-	400	-
Cl-7.1, Table-2 (iii)(Copper)	-	400	-
Cl-7.1, Table-2 (iv)(Manganese)	-	400	-
Cl-7.1, Table-2 (v)(Magnesium)	-	400	-
Cl-7.1, Table-2 (vi)(Chromium)	-	400	-
Cl-7.1, Table-2 (vii)(Zinc)	-	400	-
Cl-7.1, Table-2 (viii)(Boron)	-	400	-
Cl-7.1, Table-2 (ix)(Vanadium + Titanium)	-	400	-
Cl-7.1, Table-2 (x)(Other each)	-	400	-
Cl-7.1, Table-2 (xi)(Others total)	-	400	-
Cl-7.1, Table-2 (xii)(Aluminium)	-	400	-
Cl-8.1, Table-3(UTS (MPa))	-	2000	-
Cl-8.1, Table-3(Elongation (%) - On 250 mm gauge length)	-	1000	-
Cl-8.1, Table-3(Resistivity (micro ohm.cm) at 20 oC)	-	1000	-
Cl-8.1, Table-3(Conductivity (%) (IACS))	-	1000	-
Cl-9(Electrical resistivity)	-	2000	-
Cl-10(Diameter and Permissible Variations)	-	650	-
Cl-11(Joints)	-	400	-
Cl-12(Finish and freedom from defects)	-	400	-
Cl-16(Marking)	-	300	-

31 Dec, 2026

-
Included w.e.f 03.03.2025

IS 7404 : Part 1 (1991)

Paper covered copper conductors - Specification: Part 1 round conductors (First Revision)

12000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General test conditions )	-	500	-
5(Conductor )	-	500	-
5.1(Material )	-	500	-
5.2(Diameter )	-	2500	-
6.1(Grade of Paper)	-	500	-
7(Application of paper )	-	500	-
8(Overall diameter and increase in diameter )	-	2500	-
8.1(Double Paper Covering Ordinary (0) and Fine (F))	-	500	-
8.2(Multiple Paper Covering Special (S))	-	1000	-
8.3(Measuring Equipment)	-	1500	-
8.4(Measuring Method)	-	1000	-
9(Packing and marking )	-	500	-
4(General test conditions )	-	500	-
5(Conductor )	-	500	-
5.1(Material )	-	500	-
5.2(Diameter )	-	2500	-
6.1(Grade of Paper)	-	500	-
7(Application of paper )	-	500	-
8(Overall diameter and increase in diameter )	-	2500	-
8.1(Double Paper Covering Ordinary (0) and Fine (F))	-	500	-
8.2(Multiple Paper Covering Special (S))	-	1000	-
8.3(Measuring Equipment)	-	1500	-
8.4(Measuring Method)	-	1000	-
9(Packing and marking )	-	500	-

31 Dec, 2026

-
Included.w.e.f.15.01.2025

IS 15884 (2024)

ALTERNATING CURRENT DIRECT CONNECTED STATIC PREPAYMENT METERS FOR ACTIVE ENERGY CLASS 1 AND 2 SPECIFICATION

600000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(GENERAL REQUIREMENTS)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.2.1(Spring Hammer Test)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.2.2(Shock Test)	-	25000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.2.3(Vibration Test)	-	25000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.2.4(Test of Resistance to Heat and Fire)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.2.5(Tests of Protection against Penetration of Dust and Water)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.3.1(Dry Heat Test)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.3.2(Cold Test)	-	170000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.3.3(Damp Heat Cyclic Test)	-	22000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.1(Test of Power Consumption)	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.2(Test of influence of voltage dips and interruptions)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.3(Test of Influence of Short-Time Overcurrent)	-	130000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.4(Test of Influence of Self-Heating)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.5(Test of Influence of Heating)	-	7000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.6.2(Impulse voltage test)	-	7000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.6.3(a.c. voltage test)	-	7000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.6.4(Insulation resistance test)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.5.2(Test of Immunity to Electrostatic Discharges)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.5.3(Test of Immunity to Electromagnetic HF Fields)	-	80000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.5.4(Fast Transient Burst Test)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.5.5(Radio Interference Measurement)	-	40000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.5.6(Surge Immunity Test)	-	20000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.6.2(Test of Influence Quantities)	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.6.3(Test of No-Load Condition)	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.6.4(Test of Starting Condition)	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.6.5(Test of Meter Constant)	-	12000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.6.6(Interpretation of Test Results)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.7(Test of the Load Switch operation for payment function)	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.8(Test of Charging Functions)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.9(Interruption and Restoration of the Load for Emergency Credit Facility (if applicable))	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.10(Tests of the Load Switch operation at Different Voltages and Temperature)	-	14000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
6(FUNCTIONAL REQUIREMENTS)	-	14000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
4(GENERAL REQUIREMENTS)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.2.1(Spring Hammer Test)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.2.2(Shock Test)	-	25000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.2.3(Vibration Test)	-	25000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.2.4(Test of Resistance to Heat and Fire)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.2.5(Tests of Protection against Penetration of Dust and Water)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.3.1(Dry Heat Test)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.3.2(Cold Test)	-	170000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.3.3(Damp Heat Cyclic Test)	-	22000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.1(Test of Power Consumption)	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.2(Test of influence of voltage dips and interruptions)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.3(Test of Influence of Short-Time Overcurrent)	-	130000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.4(Test of Influence of Self-Heating)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.5(Test of Influence of Heating)	-	7000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.6.2(Impulse voltage test)	-	7000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.6.3(a.c. voltage test)	-	7000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.6.4(Insulation resistance test)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.5.2(Test of Immunity to Electrostatic Discharges)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.5.3(Test of Immunity to Electromagnetic HF Fields)	-	80000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.5.4(Fast Transient Burst Test)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.5.5(Radio Interference Measurement)	-	40000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.5.6(Surge Immunity Test)	-	20000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.6.2(Test of Influence Quantities)	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.6.3(Test of No-Load Condition)	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.6.4(Test of Starting Condition)	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.6.5(Test of Meter Constant)	-	12000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.6.6(Interpretation of Test Results)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.7(Test of the Load Switch operation for payment function)	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.8(Test of Charging Functions)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.9(Interruption and Restoration of the Load for Emergency Credit Facility (if applicable))	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.10(Tests of the Load Switch operation at Different Voltages and Temperature)	-	14000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
6(FUNCTIONAL REQUIREMENTS)	-	14000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
4(GENERAL REQUIREMENTS)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.2.1(Spring Hammer Test)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.2.2(Shock Test)	-	25000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.2.3(Vibration Test)	-	25000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.2.4(Test of Resistance to Heat and Fire)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.2.5(Tests of Protection against Penetration of Dust and Water)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.3.1(Dry Heat Test)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.3.2(Cold Test)	-	170000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.3.3(Damp Heat Cyclic Test)	-	22000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.1(Test of Power Consumption)	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.2(Test of influence of voltage dips and interruptions)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.3(Test of Influence of Short-Time Overcurrent)	-	130000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.4(Test of Influence of Self-Heating)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.5(Test of Influence of Heating)	-	7000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.6.2(Impulse voltage test)	-	7000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.6.3(a.c. voltage test)	-	7000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.4.6.4(Insulation resistance test)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.5.2(Test of Immunity to Electrostatic Discharges)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.5.3(Test of Immunity to Electromagnetic HF Fields)	-	80000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.5.4(Fast Transient Burst Test)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.5.5(Radio Interference Measurement)	-	40000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.5.6(Surge Immunity Test)	-	20000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.6.2(Test of Influence Quantities)	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.6.3(Test of No-Load Condition)	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.6.4(Test of Starting Condition)	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.6.5(Test of Meter Constant)	-	12000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.6.6(Interpretation of Test Results)	-	15000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.7(Test of the Load Switch operation for payment function)	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.8(Test of Charging Functions)	-	5000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.9(Interruption and Restoration of the Load for Emergency Credit Facility (if applicable))	-	10000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
5.10(Tests of the Load Switch operation at Different Voltages and Temperature)	-	14000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2
6(FUNCTIONAL REQUIREMENTS)	-	14000	Complete Testing Charge = 350000/- for UC1 Complete Testing Charge = 600000/- for UC1 & UC2

31 Dec, 2026

-
Included.w.e.f.15.01.2025

IS 17018 : Part 1 (2022)

Solar Photovoltaic Water Pumping Systems Part 1 Centrifugal Pumps Specification

55000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Observation)	-	100	-
4.2.2(Observation)	-	100	-
4.2.3(Provision for remote monitoring)	-	100	-
4.3.1(STC Power (Wp))	-	100	-
4.3.2(Observation)	-	100	-
4.3.3(Observation)	-	100	-
4.3.4(Observation)	-	100	-
4.3.5(Observation)	-	100	-
4.3.6(Salt mist corrosion test)	-	100	VERIFICATION ONLY
4.3.7(Observation)	-	100	-
4.3.8(STC Power (Wp))	-	100	-
4.3.9(STC Power (Wp))	-	100	-
4.3.10(Solar Photo Voltaic (SPV) Array)	-	100	-
4.4.1(Motor- Pump set)	-	100	-
4.4.2(Observation)	-	100	-
4.4.3(Motor- Pump set Material)	-	100	-
4.5.1(Observation)	-	100	-
4.5.2(Observation)	-	100	-
4.5.3(Observation)	-	100	-
4.5.1(Module Mounting Structures and Tracking system)	-	100	-
4.5.4(Design of MMS)	-	100	-
4.6.1(SPV Pump Controller)	-	100	-
4.6.2(Observation)	-	100	-
4.6.3(Observation)	-	100	-
4.6.4(Observation)	-	100	-
6.2(Performance (with Sun simulator))	-	100	-
4.6.5(Observation)	-	100	-
4.7.1(Earthling arrangement)	-	100	-
4.7.4(Observation)	-	100	-
6.1(Observation)	-	8000	-
7.1(Litre/Wp, LPD, Head)	-	15000	-
7.2(Observation)	-	3700	-
7.2(Observation)	-	3700	-
8.1.1(Observation)	-	100	-
8.1.2(Observation)	-	100	-
9(Observation)	-	100	-
5(Litre, Litre/Wp)	-	25000	-
6(TESTS FOR HYDRAULIC AND ELECTRICAL PERFORMANCE OF PUMPSET)	-	100	-
4.2.1(Observation)	-	100	-
4.2.2(Observation)	-	100	-
4.2.3(Provision for remote monitoring)	-	100	-
4.3.1(STC Power (Wp))	-	100	-
4.3.2(Observation)	-	100	-
4.3.3(Observation)	-	100	-
4.3.4(Observation)	-	100	-
4.3.5(Observation)	-	100	-
4.3.6(Salt mist corrosion test)	-	100	VERIFICATION ONLY
4.3.7(Observation)	-	100	-
4.3.8(STC Power (Wp))	-	100	-
4.3.9(STC Power (Wp))	-	100	-
4.3.10(Solar Photo Voltaic (SPV) Array)	-	100	-
4.4.1(Motor- Pump set)	-	100	-
4.4.2(Observation)	-	100	-
4.4.3(Motor- Pump set Material)	-	100	-
4.5.1(Observation)	-	100	-
4.5.2(Observation)	-	100	-
4.5.3(Observation)	-	100	-
4.5.1(Module Mounting Structures and Tracking system)	-	100	-
4.5.4(Design of MMS)	-	100	-
4.6.1(SPV Pump Controller)	-	100	-
4.6.2(Observation)	-	100	-
4.6.3(Observation)	-	100	-
4.6.4(Observation)	-	100	-
6.2(Performance (with Sun simulator))	-	100	-
4.6.5(Observation)	-	100	-
4.7.1(Earthling arrangement)	-	100	-
4.7.4(Observation)	-	100	-
6.1(Observation)	-	8000	-
7.1(Litre/Wp, LPD, Head)	-	15000	-
7.2(Observation)	-	3700	-
7.2(Observation)	-	3700	-
8.1.1(Observation)	-	100	-
8.1.2(Observation)	-	100	-
9(Observation)	-	100	-
5(Litre, Litre/Wp)	-	25000	-
6(TESTS FOR HYDRAULIC AND ELECTRICAL PERFORMANCE OF PUMPSET)	-	100	-
4.2.1(Observation)	-	-	-
4.2.2(Observation)	-	-	-
4.2.3(Provision for remote monitoring)	-	-	-
4.3.1(STC Power (Wp))	-	-	-
4.3.2(Observation)	-	-	-
4.3.3(Observation)	-	-	-
4.3.4(Observation)	-	-	-
4.3.5(Observation)	-	-	-
4.3.6(Salt mist corrosion test)	-	-	-
4.3.7(Observation)	-	-	-
4.3.8(STC Power (Wp))	-	-	-
4.3.9(STC Power (Wp))	-	-	-
4.3.10(Solar Photo Voltaic (SPV) Array)	-	-	-
4.4.1(Motor- Pump set)	-	-	-
4.4.2(Observation)	-	-	-
4.4.3(Motor- Pump set Material)	-	-	-
4.5.1(Observation)	-	-	-
4.5.2(Observation)	-	-	-
4.5.3(Observation)	-	-	-
4.5.1(Module Mounting Structures and Tracking system)	-	-	-
4.5.4(Design of MMS)	-	-	-
4.6.1(SPV Pump Controller)	-	-	-
4.6.2(Observation)	-	-	-
4.6.3(Observation)	-	-	-
4.6.4(Observation)	-	-	-
6.2(Performance (with Sun simulator))	-	-	-
4.6.5(Observation)	-	-	-
4.7.1(Earthling arrangement)	-	-	-
4.7.4(Observation)	-	-	-
6.1(Observation)	-	-	-
7.1(Litre/Wp, LPD, Head)	-	-	-
7.2(Observation)	-	-	-
7.2(Observation)	-	-	-
8.1.1(Observation)	-	-	-
8.1.2(Observation)	-	-	-
9(Observation)	-	-	-
5(Litre, Litre/Wp)	-	-	-
6(TESTS FOR HYDRAULIC AND ELECTRICAL PERFORMANCE OF PUMPSET)	-	-	-

31 Dec, 2026

-
Included.w.e.f.13.01.2025

IS 3854 (1997)

Switches for domestic and similar purposes - Specification (Second Revision)

32000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Marking)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8(Marking)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8(Marking)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8(Marking)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8(Marking)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8(Marking)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8(Marking)	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8(Marking)	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8.9(Marking)	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8(Marking)	-	25	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
6(Rating)	-	25	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
6(Rating)	-	25	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7(Classification)	-	25	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
10(Protection against Electric Shock)	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
11.1(Provision for earthing)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12(Terminals)	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.1(Terminals)	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12(Terminals)	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.2(Connection of conductor)	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.3(Mechanical strength of terminals)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.3(Mechanical strength of terminals)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.4(Resistance to corrosion)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.4(Resistance to corrosion)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.5(Undue damage to conductor)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.7(Insertion of conductor)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.9(Locking against accidental loosening)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.11(Distance between screw and conductor)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.11(Distance between screw and conductor)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.2(Screwless terminals)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.3(Connectin of conductor)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.4(Material of terminals)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.5(Clamping)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.5(Clamping)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.7(v) Interconnection of conductors [Cl. 12.3.7])	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	700	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.11(vi) Electrical & Thermal Stresses [Cl 12.3.11])	-	700	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.12(vii) Deflection Stresses [Cl. 12.3.12])	-	700	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.1(a) Insulating lining, barriers and the like [Cl 13.1])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.2(b) Construction of switch [Cl 13.2])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.2(i) Installation Test)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.3(c) Covers,cover plates and actuating members [Cl 13.3])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.4(d) Ordinary switches [Cl 13.4])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.5(e) Rotary switches [Cl 13.5])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.6(f) Screws and other means [Cl 13.6])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.7(g) Combination of switches or switches and socket outlets [Cl 13.7])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.8(h) Assessories combined with switches [Cl. 13.8])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.9(j) Switches other than ordinary switches [Cl. 13.9])	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.1(k) Switches to be installed in a box [Cl. 13.10])	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.11(l) Surface type switches other than ordinary switch [Cl. 13.11])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.12, 13.13, 13.14(m) Inlet opening [Cl. 13.12.13.13 & 13.14])	-	300	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.15(q) Requirements for membrane in inlet opening [ Cl. 13.15])	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
14(Mechanism [Cl. 14])	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
14.4(Mechanism)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
15.1(Resistance to Ageing, to Harmful Ingress of water and to Humidity [Cl. 15]: Resistance to Ageing, [Cl. 15.1])	-	350	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
15.2(b)Resistance to Harmful ingress of water [Cl. 15.2])	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
15.3(c) Resistance to Humidity [Cl. 15.3])	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
16.1(Insulation resistance [Cl. 16.1])	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
16.2( Electric Strength [Cl. 16.2])	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
17(Temperature- rise [Cl. 17])	-	350	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
18(Marking and breaking Capacity[Cl. 18])	-	350	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
18(Marking and breaking Capacity[Cl. 18])	-	350	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
19(Normal Operation [Cl. 19] a) General & Operation)	-	700	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
19(b) Electric Strength)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
19(c)Temperature-rise )	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
14.3(d)Test for arcing and sparking [Cl 14.3])	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
19.2(Normal Operation (For AX type Switches) [Cl. 19.2])	-	400	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
19.2(Normal Operation (For AX type Switches) [Cl. 19.2])	-	400	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20(Mechanical Strength Test [Cl. 20])	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
21(Resistance to Heat [Cl.21])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
21(Resistance to Heat [Cl.21])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
21(Resistance to Heat [Cl.21])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
22(Screw, Current Carrying Part And Connection [Cl.22])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
22.1(i) Screw & Nuts [Cl.22.1])	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
22.4(ii) Screw & rivets [Cl . 22.4])	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
22.3(iii) Electrical Connections [Cl.22.3])	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
22.5(iv) Current carrying part [Cl.22.5])	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
23.2(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
23(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
23(Creepage distances, clearances and distance through sealing compound [Cl.23])	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
24.1.1(Resistance to Abnormal Heat & Fire [Cl.24.1] [Glow Wire Test] [Cl.24.1.1])	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
24.2(Resistance to tracking [For Switch other than ordinary] [Cl.24.2])	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
25 of IS 3854 : 1997(Resistance to rusting)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
11.3(Provision for earthing)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
11.2(Provision for earthing)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.9(Screwless terminal fixing)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.8(Screwless terminals design)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.1(Screwless terminals)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
14.6(Mechanism)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
14.5(Mechanism)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
16.3(Flash test)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.8(Mechanical Strength Test)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.7(Mechanical Strength Test)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.6(Mechanical Strength Test)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.5(Mechanical Strength Test)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.4(Mechanical Strength Test)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.3(Mechanical Strength Test)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.2(Mechanical Strength Test)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.1(Mechanical Strength Test)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
21.2(Resistance to Heat)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
21.1(Resistance to Heat)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
24.1(Resistance of insulating material to abnormal heat, to fire and to tracking )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
24(Resistance of insulating material to abnormal heat, to fire and to tracking )	-	50	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
23.2(Creepage distances, clearances & distance through sealing compound )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
23.1(Creepage distances, clearances & distance through sealing compound )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
22.7(Screws, current carrying parts and connections )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
22.6(Screws, current carrying parts and connections )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
22.5(Screws, current carrying parts and connections )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
22.4(Screws, current carrying parts and connections )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
22.3(Screws, current carrying parts and connections )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
22.2(Screws, current carrying parts and connections )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
22.1(Screws, current carrying parts and connections )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
22.2(Measurement and manual test)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
22.6(Inspection and chemical analysis)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
21.3(Resistance to heat )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
21.2(Resistance to heat )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
21.1(Resistance to heat )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.9(Mechanical strength )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.8(Mechanical strength )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.7(Mechanical strength )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.6 & 24.4.2(Mechanical strength )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.6 & 24.4.1(Mechanical strength )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.5 & 24.4.2(Mechanical strength )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.5 & 24.4.1(Mechanical strength )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.4.2(Mechanical strength )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.4.1(Mechanical strength )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.4(Mechanical strength )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.3(Mechanical strength )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
20.2(Mechanical strength )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
19.2(Normal operation)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
19.1(Normal operation)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
18.2(Making and breaking capacity )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
18.1(Making and breaking capacity )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
16.3(Insulation resistance and electric strength )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
16(Insulation resistance and electric strength )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
15.3(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
15.2.3(Resistance to ageing, to harmful ingress of water and to humidity )	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
15.2.2(Resistance to ageing, to harmful ingress of water and to humidity )	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
15.2.1(Resistance to ageing, to harmful ingress of water and to humidity )	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
15.2(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
15.1(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
15(Resistance to ageing, to harmful ingress of water and to humidity )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
14.6(Mechanism)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
14.5(Mechanism)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
14.4(Mechanism)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
14.3(Mechanism)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
14.2(Mechanism)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
14.1(Mechanism)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.15.2(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.15.1(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.15(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.14(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.13(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.12(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.11(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.1(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.9(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.8(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.7(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.6(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.5(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.4(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.3.3(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.3.2(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.3.1(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.3(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.2(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.1(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13(Constructional requirements )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.12(Terminals)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.11.b(Terminals)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.11.a(Terminals)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.10(Terminals)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.9(Terminals)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.8(Terminals)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.6(Terminals)	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.1(Terminals)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3(Terminals)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.12(Terminals)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.10(Terminals)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.8(Terminals)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.10(Terminals)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.8(Terminals)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.6(Terminals)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2(Terminals)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.1(Terminals)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
11.4(Provision for earthing)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
11.3(Provision for earthing)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
11.2(Provision for earthing)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
11.1(Provision for earthing)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
10.7(Protection against electric shock )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
10.6(Protection against electric shock )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
10.5(Protection against electric shock )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
10.4(Protection against electric shock )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
10.3.2(Protection against electric shock )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
10.3.1(Protection against electric shock )	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
10.3(Protection against electric shock )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
10.2(Protection against electric shock )	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
10.1(Protection against electric shock )	-	200	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8.1(Marking)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8.8(Marking)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8.7(Marking)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8.6(Marking)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8.5(Marking)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8.4(Marking)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8.3(Marking)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
8.1(Marking)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7.2(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7.1.8(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7.1.7(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7.1.6(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7.1.5(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7.1.4(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7.1.3(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7.1.2(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7.1.1(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
7.1(Classification)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
6.2(Ratings)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
6.1(Ratings)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
6(Ratings)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
25(Resistance to Rusting)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.2.6(Terminals, Qualitative)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.1(Terminals, Qualitative)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.6(Terminals, Qualitative)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
12.3.10(Terminals, Qualitative)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
13.12(Qualitative)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs
14(Mechanism)	-	100	For BIS Samples 1.5 times of BIS Testing Charges and Others Upto 10Amp = 10000Rs, Above 10Amp upto 20Amp = 15000Rs, Above 20Amp upto & including 32Amp= 20000Rs,Above 32Amp = 32000Rs

31 Dec, 2026

-
-

IS 17048 (2018)

Halogen free flame retardant (HFFR) cables for working voltages up to and including 1 100 Volts - Specification

180000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.1.1 a) (Conductor : Material )	-	250.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.1.1 b) (Material : Seperator tape )	-	250.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.1.1 d) , 11.1, 12.1, 13.1,14.1(Class of conductor )	-	250.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.1.1 e) (Shape of conductor )	-	500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.1.1 f) (Nominal size of conductor )	-	500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.2.1, 11.2, 12.2, 13.2, 14.2(Insulation : Material )	-	250.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.2.2, 11.2, 12.2, 13.2, 14.2(Insulation : Application )	-	250.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.2.3,11.2, 12.2, 13.2(Thickness of insulation - Avearge : IS 10810 ( Part 6 ))	-	2500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.2.3, 11.2, 12.2, 13.2, 14.2(Thickness of insulation - miniumum : IS 10810 ( Part 6 ))	-	1500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.2.4(Insulation : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	3000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.2.4(Insulation : Elongation ( Before ageing) -IS 10810 (Part 7))	-	1500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.2.4(Insulation : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	3000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.2.5(Insulation : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	2500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.2.4(Insulation : Elongation (after ageing) - IS 10810 (Part 7) )	-	2500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.2.5(Insulation : Elongation variation (after ageing) - IS 10810 (Part 7) )	-	1500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.3(Fillers)	-	500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.4(Binder Tape)	-	500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.5.1,13.4, 14.4(Sheath : Compound )	-	500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.5.2, 13.4, 14.4(Sheath : Application)	-	500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.5.3,13.4, 14.4(Thickness of sheath - Average : IS 10810 (Part 6))	-	2000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.5.3,13.4, 14.4(Thickness of sheath - Minimum : IS 10810 (Part 6))	-	500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.5.4, 13.4(Sheath : Tensile stregth ( Before ageing)-IS 10810 (Part 7) )	-	1500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.5.4,13.4(Sheath : Elongation ( Before ageing) -IS 10810 (Part 7))	-	1500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.5.4, 13.4, 14.4(Sheath : Tensile stregth ( After ageing) - IS 10810 (Part 7) )	-	1500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.5.5, 13.4, 14.4(Sheath : Tensile stregth variation ( After ageing) - IS 10810 (Part 7) )	-	1500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.5.4, 13.4, 14.4(Sheath : Elongation (after ageing) - IS 10810 (Part 7) )	-	1500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.5.5, 11.3, 12.3, 13.6, 14.6(Overall Dimensions)	-	1000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.5.5.1, 11.3, 12.3,13.5, 14.5(Ovality)	-	1000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.5.6, 13.4(Colour of Sheath)	-	500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.1(High Voltage Test (at Room Temperature))	-	10000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.3(Flammability Test- IS 10810 (Part 53).)	-	2000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.4(Oxygen Index Test- IS 10810 (Part 58))	-	5000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.5(Temperature Index-IS 10810 (Part 64).)	-	5000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.6(Smoke Density-IS 10810 (Part 63).)	-	5000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.7(Assessment of Halogen- Table 1 of Annex D)	-	10000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.1(Persulphate Test- IS 10810 (Part 4).)	-	3000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.11(Flame Retardant Test- IS 10810 (Part 61),)	-	7000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.12(Hot Set Test- IS 10810 (Part 30).)	-	3000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.12(Permanent Set - IS 10810 (Part 30).)	-	1000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.13(Water Immersion Test (Effect of Water on Sheath) : Tensile strength -IS 10810 (Part 7).)	-	5000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.13(Water Immersion Test (Effect of Water on Sheath) : Elogation -IS 10810 (Part 7).)	-	5000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.14(Ozone Resistance Test -IS 10810 (Part 13 ))	-	12000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.15(Cold Bend Test-IS 10810 (Part 20).)	-	1500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.16(Cold Impact Test- IS 10810 (Part 21).)	-	1500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
6.1, Table 1(CORE IDENTIFICATION)	-	500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
6.2(Core Identification by Numbers)	-	500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
6.2.1(Preferred Arrangement of Marking)	-	500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
6.2.2(Durability)	-	500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
7.0(CABLE CODE)	-	150.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
9.0( IDENTIFICATION)	-	150.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
10.1(Packing )	-	150.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
10.2(marking)	-	150.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
10.2.1(Standards marking)	-	150.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
13.3, 14.3(assembly of cores )	-	150.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
6.1(General Requirements)	-	150.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
6.1.1(Colour Combination Green Yellow)	-	150.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
12.1(Conductor)	-	150.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
12.2, Table 4(insulation)	-	150.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
Table 2 ,( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )(Insulation Resistance)	-	2500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Conductor Resistance)	-	2500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
Table 2 , Clause .5.13(Water immersion test (Effect of water on sheath) - TS Variation of Sheath)	-	10000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
Table 2 , Clause 5.13(Water immersion test (Effect of water on sheath) - Elongation Variation of Sheath)	-	2500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
"Table 2 ( Clause 11.4, 12.4, 13.7 14.7 and 15.7 )"(Hot Deformation)	-	2500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
Table 2, III.a.ii(Annealing test (for Cu, before stranding))	-	2500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
Table 2, II.a, b(Wrapping test before stranding (for Al))	-	1500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
Table 4(Copper Purity test)	-	2500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.3.1 (e)(Fluorine content test (Fillers))	-	7000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.3.1 (d)(Presence of fluorine test (Fillers))	-	7000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.3.1 (c)(Conductivity test (Fillers))	-	500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.3.1 (b)(pH test (Fillers))	-	2500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
4.3.1 (a)(HCl test (Fillers))	-	2500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.7 (a)(HCl test (Assessment of halogen test))	-	5000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.7 (b)(pH test (Assessment of halogen test))	-	2500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.7 (c)(Conductivity test (Assessment of halogen test))	-	2500.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.7 (d)(Presence of fluorine test (Assessment of halogen test))	-	5000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)
5.7 (e)(Fluorine content test (Assessment of halogen test))	-	5000.00	single core(HFFR)insulated(unsheathed)cables Rs. 93K for cat. 01&02,Rs 85K for cat. 03&04.single core(HFFR)insulated & sheathed cables Rs 1,60,000 for cat. 01&02,Rs 1,50,000 for cat. 03&04.Multi core(HFFR)insulated & sheathed cable Rs 1,80,800 (all core)

31 Dec, 2026

-
Included w.e.f. 13.06.2024

IS 16444 : Part 2 (2017)

AC static transformer operated watthour and var - Hour smart meters, class 0.2 S, 0.5 S and 1.0 S: Part 2 specification transformer operated smart meters

210000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.10.6((9.5 of IS 14697 ) Insulation Requirement )	-	1000	-
6.10.6((9.5 of IS 14697 ) Insulation Rtequirement )	-	1000	-
6.10.6((9.5 of IS 14697 ) Insulation Rtequirement )	-	1000	-
6.10.6((9.5 of IS 14697 ) Insulation Rtequirement )	-	1000	-
6.12(Test on limits of error)	-	5500	-
6.12(Test of meter constant)	-	1000	-
6.12(Test of starting condition)	-	2000	-
6.12(Test of no-load condition)	-	1000	-
6.12((11 of IS 14697 ) Accuracy Requirement )	-	1000	-
6.12(Test of ambient temperature influence)	-	2000	-
6.12(Test of repeatability of error)	-	3000	-
6.12(Test of influence quantities)	-	2000	-
6.12(Voltage Variation)	-	1000	-
6.12(Frequency Variation)	-	1000	-
6.12(Waveform 10% of 3rd Harmonics)	-	500	-
6.12(Reversed Phase Sequence)	-	500	-
6.12(Voltage Unbalanced)	-	500	-
6.12(Continuous Magnetic Induction of External Origin 67 milli Tesla)	-	500	-
6.12(Continuous Magnetic Induction of External Origin 0.2 Tesla)	-	500	-
6.12(Magnetic induction of External Origin 0.5mT)	-	1000	-
6.12(Abnormal Magnetic Induction of External Origin 10mT)	-	500	-
6.12(Operation of Accessories)	-	500	-
6.10.1(Test of power consumption)	-	1500	-
6.10.2(Test of influence of supply voltage)	-	1500	-
6.10.3(Test of influence of short time over currents)	-	1500	-
6.10.4(Test of influence of self-heating)	-	2000	-
6.10.5(Test of influence of heating)	-	2000	-
6.10.7(Test of immunity to earth/phase fault)	-	2000	-
6.11(Electromagnetic Compatibility)	-	5000	-
6.11(Radio interference measurement)	-	20000	-
6.11(Fast transient burst test)	-	20000	-
6.11(Test of immunity to electrostatic discharge)	-	20000	-
6.11(Test of immunity to electromagnetic HF field)	-	25000	-
6.11(Surge Immunity test)	-	10000	-
9.3(Test of Display)	-	1000	-
6.9(Climatic Codition)	-	1000	-
6.9(Dry heat test)	-	4000	-
6.9(Cold test)	-	3000	-
6.9(Damp heat cyclic test)	-	4000	-
6.5(Mechanical Requirement)	-	2000	-
6.5(Vibration test)	-	5000	-
6.5(Shock test)	-	2000	-
6.5(Spring hammer test)	-	1000	-
6.5(Test of protection against penetration of dust and water)	-	2500	-
6.1(Electrical Requirments)	-	500	-
6.1(Electrical Requirments)	-	500	-
6.1(Electrical Requirments)	-	500	-
6.2(General constructional Requirement)	-	500	-
6.2(General constructional Requirement)	-	500	-
6.3(Measurement ( 6.6 of IS 14697))	-	500	-
6.6(Display of measured values)	-	500	-
6.3(Clearance and creepage distances)	-	1000	-
6.7(Output device)	-	500	-
6.8(Inspection )	-	500	-
6.8.1(Additional information)	-	1000	-
6.8(Marking of meters Name plate)	-	500	-
6.8(BIS Standard Mark)	-	500	-
6.8(Connection diagrams and terminal marking)	-	500	-
10.0(Smart Meter Functional Requirements)	-	500	-
7, 9.4(Data Exchange for Electricity Meter Reading, Tariff and Load Control Companion Specification (The requirement as per IS 15959 : Part 1 & Part 3 shall apply))	-	500	-
8, 9.5(Smart Meter Communicability)	-	500	-
6.2(Communication module)	-	500	-
6.4(Test of resistance to heat and fire)	-	1000	-
Note b of Table 1(Access and data read test)	-	500	-
Note a of Table 1(Accuracy of the meter at pre-defined points)	-	500	-
6.10.6(Insulation test)	-	1000	-
6.10.6(ac high voltage test)	-	1500	-
6.10.6(Impulse voltage test)	-	2000	-
6.2.2(Insulating encased meter)	-	50	-
6.2.2(Terminal Cover(s))	-	50	-
6.2.1(Heat Deflection Test)	-	500	-
6.2.1(Terminals, terminal block and protective earth terminal)	-	500	-
6.2(Window)	-	50	-
6.2(Meter case)	-	50	-
6.10.7((9.6 of IS 14697 ) Insulation Rtequirement )	-	1000	-
9.3(Measurement)	-	500	-
6.8(Inspection ( 7 of IS 14697) )	-	50	-
6.7(Inspection ( 6.11 of IS 14697))	-	50	-
6.6(Inspection ( 6.10 of IS 14697))	-	50	-

31 Dec, 2026

-
Included w.e.f. 28-04-2022.

IS 16444 (2015)

AC static direct connected watthour smart meter class 1 and 2 - Specification

212000.00 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.10.6(Impulse voltage test)	-	3000	-
6.10.6(ac high voltage test)	-	2500	-
6.10.6(Insulation resistance test)	-	2000	-
6.12(Test on limits of error due to variation of the current)	-	5000	-
6.12(Test of meter constant)	-	1000	-
6.12(Test of starting condition)	-	2000	-
6.12(Test of no-load condition)	-	1000	-
6.12(Test of ambient temperature influence)	-	2000	-
6.12(Test of repeatability of error )	-	3000	-
6.12(Test of influence quantities)	-	2000	-
6.12(Voltage Variation)	-	500	-
6.12(Frequency Variation)	-	500	-
6.12(Waveform 10% of 3rd Harmonics)	-	500	-
6.12(Reversed Phase Sequence)	-	500	-
6.12(Voltage Unbalanced)	-	500	-
6.12(DC & Even Harmonics in the ac current circuit)	-	500	-
6.12(Continuous Magnetic Induction of External Origin 67 milli Tesla)	-	500	-
6.12(Continuous Magnetic Induction of External Origin 0.2 Tesla)	-	500	-
6.12(Magnetic induction of External Origin 0.5mT)	-	500	-
6.12(Abnormal Magnetic Induction of External Origin 10mT)	-	500	-
6.12(Operation of Accessories)	-	500	-
6.10.1(Test of power consumption)	-	500	-
6.10.1(Test of influence of supply voltage)	-	500	-
6.10.1(Test of influence of short time over currents)	-	500	-
6.10.4(Test of influence of self-heating)	-	500	-
6.10.5(Test of influence of heating)	-	500	-
6.10.7(Test of influence of immunity to earth fault)	-	500	-
6.11(Radio interference measurement)	-	35000	-
6.11(Fast transient burst test)	-	20000	-
6.11(Test of immunity to electrostatic discharge)	-	20000	-
6.11(Test of immunity to electromagnetic HF field)	-	35000	-
6.11(Surge Immunity test)	-	15000	-
6.9(Dry heat test)	-	5000	-
6.9(Cold test)	-	4000	-
6.9(Damp heat cyclic test)	-	5000	-
6.5(Test of resistance to heat and fire)	-	1000	-
6.5(Vibration test)	-	2000	-
6.5(Shock test)	-	2000	-
6.5(Spring Hammer test)	-	3500	-
6.5(Protection against penetration of dust and water)	-	1000	-
12.4 of IS 13779(Testof Resistance to Heat and Fire )	-	1000	-
6.2(General constructional Requirement)	-	1000	-
6.2(General constructional Requirement)	-	1000	-
6.2.2(Insulating encased meter)	-	500	-
6.2.2(Terminal Cover(s))	-	500	-
6.2.1(Heat Deflection Test)	-	500	-
6.2.1(Terminals, terminal block and protective earth ter-minal)	-	500	-
6.2(Communication module Load switch)	-	500	-
6.2(Window)	-	500	-
6.2(Meter case)	-	500	-
6.2(General and constructional requirements)	-	500	-
6.3(Measurement)	-	500	-
6.6(Display of measured values)	-	500	-
6.7(Output device)	-	500	-
6.8(BIS Standard Mark)	-	500	-
6.8(Marking of smart meters Name plate)	-	500	-
cl. 7.1 a) of IS 13779(MARKING OF METERS : Name Plate )	-	500	-
cl. 7.1 b) of IS 13779(MARKING OF METERS : Name Plate )	-	500	-
cl. 7.1 c) of IS 13779(MARKING OF METERS : Name Plate )	-	500	-
cl. 7.1 d) of IS 13779(MARKING OF METERS : Name Plate )	-	500	-
cl. 7.1 e) of of IS 13779(MARKING OF METERS : Name Plate )	-	500	-
cl. 7.1 f) of IS 13779(MARKING OF METERS : Name Plate )	-	500	-
cl. 7.1 g) of IS 13779(MARKING OF METERS : Name Plate )	-	500	-
cl. 7.1 h) of IS 13779(MARKING OF METERS : Name Plate )	-	500	-
cl. 7.1 j) of IS 13779(MARKING OF METERS : Name Plate )	-	500	-
cl. 7.1 k) of IS 13779(MARKING OF METERS : Name Plate )	-	500	-
cl. 7.1 m) of IS 13779(MARKING OF METERS : Name Plate )	-	500	-
cl. 7.1 p) of IS 13779(MARKING OF METERS : Name Plate )	-	500	-
cl. 7.1 n) of IS 13779(MARKING OF METERS : Name Plate )	-	500	-
7.2, 10.4(Performance Requirements for Load Switching (UC1))	-	500	-
7.2, 10.4(Dielectric strength (G-8))	-	500	-
7.2, 10.4(Minimum switched current (G-7))	-	500	-
7.2, 10.4(Short circuit current carrying capacity (G-6))	-	500	-
7.2, 10.4(Fault current making capacity (G-5))	-	500	-
7.2, 10.4(Line to load voltage surge withstand (G-4))	-	500	-
8.0(Data Exchange for Electricity Meter Reading, Tariff and Load Control Companion Specification (Verification up to two Port))	-	500	-
9, 10.6(Test of Smart Meter Communicability)	-	500	-
10.3(Test of Display)	-	500	-
10.3(Inspection)	-	500	-
10.4(Test for Load Switch)	-	5000	-
10.5(Test for Data Exchange Protocol)	-	500	-
10.6.2(Test for Smart meter communicability )	-	500	-
11(Smart Meter Functional Requirement)	-	100	-
cl. 11.1 of IS 13779(Limits of Error Due to Variation of tile Current)	-	100	-
cl. 11.2 of IS 13779(Limits of Error Due to Other Influence Quantities (Voltage-Variation, Frequency Variation, Phase-Sequence, Wave Form, Voltage-Unba.ance))	-	100	-
cl. 11.3 of IS 13779(Limits of Error Due to Ambien! Temperature Variation )	-	100	-
cl. 11.4 of IS 13779(Starting and Running w'th No-Load)	-	100	-
cl. 11.5 of IS 13779(Starting Current)	-	100	-
cl. 11.6 of IS 13779(Meter Constant)	-	100	-
cl. 12.7.6.3 of IS 13779(ac Voltage test)	-	1000	-
cl. 12.7.6.4 of IS 13779(Insulation resistance test)	-	500	-
12.10.1 a) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	500	-
12.10.1 b) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	500	-
12.10.1 c) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	500	-
12.10.1 d) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	500	-
12.10.1 e) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	500	-
12.10.1 f) of IS 13779(Testof Accuracy Requirements : General Test Conditions )	-	500	-
cl 11.1 of IS 13779(Limits of Error and Interpretation or Test Results)	-	500	-
12.16 a) of IS 13779(Limits of Error and Interpretation or Test Results)	-	500	-
12.16 b) of IS 13779(Limits of Error and Interpretation or Test Results)	-	500	-
12.16 c) of IS 13779(Limits of Error and Interpretation or Test Results)	-	500	-
12.15 of IS 13779(Test of Meter Constant/Registration)	-	500	-
12.14 of IS 13779(Test of Starting Conditions)	-	500	-
12.13 of IS 13779(Test of No-Load Condition)	-	500	-
12.12 of IS 13779(Test ofAmbient Temperature Influence)	-	500	-
12.17 of IS 13779(Repeatability of Error Test )	-	500	-
12.11 of IS 13779(Test of Iniluence Quantities)	-	500	-
12.7.1 of IS 13779(Test of Power Consumption)	-	500	-
12.7.2 of IS 13779(Test of Influence of Supply Voltage)	-	500	-
12.7.3 of IS 13779( Test of Influence of Short-time Overcurrents)	-	1000	-
12.7.4 of IS 13779(Test of Influence of Self-Heating)	-	500	-
12.7.5 of IS 13779(Test of Influence of Heating)	-	500	-
12.8 of IS 13779(TestorImmunity to Earth Fault)	-	500	-
12.9.2 of IS 13779(Test for Immunity to Electrostatic Discharge (ESD))	-	2000	-
12.9.3 of IS 13779(Test for Immunity to EIectromagnetic HF Fields)	-	20000	-
12.9.4 of IS 13779(FastTransient BurstTest)	-	20000	-
12.9.5 of IS 13779(Radio Interference Measurement)	-	20000	-
12.6.1 of IS 13779(Dry Heat Test)	-	500	-
12.6.2 of IS 13779(Cold Test)	-	500	-
12.6.3 of IS 13779( Damp Heat Cycle Test)	-	1500	-
4.4.2.1 of IS 15844(Voltage range)	-	500	-
4.4.2.2 of IS 15844( Specified operating range )	-	500	-
4.4.2.3 of IS 15844(Extended operating range)	-	500	-
4.4.2.4 of IS 15844( Limit range of operation)	-	500	-
4.4.2.5 of IS 15844(Withstand range)	-	500	-
4.4.2.6 of IS 15844(Abnormal voltage conditions)	-	500	-
4.4.2.7 of IS 15844(Voltage dips and short interruptions)	-	500	-
4.4.3 of IS 15844(Influence of Short-Time Overcurrents)	-	500	-
4.4.4 of IS 15844(Influence of Self-Heating)	-	500	-
4.4.5 of IS 15844(Influence of Heating)	-	500	-
4.4.6 of IS 15844(Insulation)	-	500	-
6.3(Clearance and creepage distances)	-	500	-
11.0(Smart meter functional requirements)	-	500	-
7.2, 10.4(Electrical endurance (G-3))	-	500	-
7.2, 10.4(Normal operation (G-2))	-	500	-
Note 1c of Table 1(Remote disconnect/connect)	-	500	-
Note 1b of Table 1(Access and data read test)	-	500	-
Note 1a of Table 1(Accuracy of the meter at pre-defined points)	-	500	-
6.8(Connection diagrams and terminal marking)	-	1000	-
Table 1 (Note 1)(Schedule of type tests)	-	500	-
Table 1 (Note 1)(Schedule of type tests)	-	600	-
6.11(Electromagnetic Compatibility)	-	700	-
6.8(Inspection)	-	600	-
6.7(Inspection)	-	600	-
6.6(Inspection)	-	60	-

31 Dec, 2026

-
Included w.e.f. 28-04-2022.

IS 15884 (2010)

Alternating current direct connected static prepayment meters for active energy (Class 1 And 2) - Specification

240000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.2(Test of mechanical requirements)	-	500	-
5.2.1(As per cl 12.3.3 of IS 13779)	-	1000	-
5.2.2(As per IS 9000 (Part 7/Sec 1))	-	4000	-
5.2.3(As per IS 9000 (Part 8))	-	4000	-
5.2.4(As per IS 11000 (Part 2 / Sec1))	-	3000	-
5.2.5(Protection against penetration of dust (IP5X))	-	500	-
5.2.5(Protection against penetration of water (IP1X))	-	500	-
5.2.5(500 V dc)	-	500	-
5.2.5(As per IS 12063)	-	500	-
5.3(Tests of Climatic Influences)	-	500	-
5.3.1(according to IS 9000 (Part 3/ Sec 1 to 5))	-	500	-
5.3.2(according to IS 9000 (Part 2/Sec 1 to 4))	-	4000	-
5.3.3(according to IS 9000 (Part 5/Sec 1 and 2))	-	1500	-
5.3.3(As per cl 5.4.6)	-	1500	-
5.3.3(Visual examination)	-	1000	-
5.4(As per 5.6.1)	-	500	-
5.4.1(As per 4.4.1.1)	-	1500	-
5.4.2(As per 4.4.2.1)	-	1500	-
5.4.3(Table 8, as per cl4.4.3)	-	3000	-
5.4.4(Table 9, and cl 4.4.4)	-	2000	-
5.4.5(As per cl 4.4.5)	-	2000	-
5.4.6(As per IS 2071 (Part1))	-	500	-
5.4.6.2(6 KV, As per cl 12.7.6.2 of IS 13779)	-	500	-
5.4.6.2(12.7.6.2 of IS 13779)	-	2500	-
5.4.6.3(Table 15, power source 500 VA)	-	2500	-
5.4.6.4(500±50V dc)	-	2000	-
5.5(Test of electromagnetic compatibility)	-	5000	-
5.5.2(according to IS 14700 (Part 4/Sec 2))	-	10000	-
5.5.2(the load switch shall not operate during the tests.)	-	5000	-
5.5.3(Table 12 & IS 14700 (Part 4/Sec 3))	-	35000	-
5.5.4(according to IS 14700 (Part 4/Sec 4))	-	20000	-
5.5.5(according to IEC 62052-11)	-	35000	-
5.5.6(Surge Immunity Test)	-	10000	-
5.5.6(according to IEC 61000- 4-5)	-	10000	-
5.6(As per cl 4.6)	-	5000	-
4.6.1(As per table 10 & 11, cl 5.6.1)	-	12000	-
5.6.3(I= open circuit V= 115% of rated voltage test period 60 000/k minutes)	-	1000	-
5.6.4(As per cl 4.6.3, Table 13)	-	1000	-
5.6.5(As per cl 4.6.5)	-	2000	-
5.6.7(Test shall be carried out at 0.05Ib and Ib at UPF load under reference conditions. Twenty error samples shall be taken at time-intervals of 30 minutes)	-	3000	-
5.8(Test of Load Switch)	-	15000	-
5.9(Test of Consumption-Based charging function)	-	5000	-
5.10(Test of Time-Based charging function)	-	5000	-
6(Functional Requirements)	-	500	-
Annexure A(Functional Performance)	-	500	-
4(General Requirements)	-	500	-
4.1.1(By Inspection)	-	500	-
4.1.2(By Inspection)	-	500	-
4.1.3(By Inspection)	-	500	-
4.1.4(By Inspection)	-	500	-
4.2(Mechanical Requirements)	-	500	-
4.2.1(By Inspection)	-	500	-
4.2.2(By Inspection)	-	500	-
4.2.2(By Inspection)	-	500	-
4.2.3(By Inspection)	-	500	-
4.2.4(IS 13360 (Part 6/Sec 17) for a temperature of 135°C and a pressure of 1.8 MPa (Method A).)	-	500	-
4.2.4(By inserting copper conductor of appropriate size)	-	500	-
4.2.4(By Inspection)	-	500	-
4.2.5(shall have a separate cover which can be sealed independently of the meter cover. The terminal cover shall enclose the actual terminals)	-	200	-
4.2.5(The terminals their fixing screws, a suitable length of external insulated conductor and its insulation shall be enclosed by a cover with a provision for sealing. )	-	200	-
4.2.5(The fixing screws used on the terminal cover for fixing and sealing shall be held captive in the terminal cover.)	-	200	-
4.2.5(When the meter is mounted on the meter board, no access to the terminals shall be possible without breaking the seal of the terminal cover.)	-	200	-
4.2.6(By measurement)	-	1000	-
4.2.7(Standard test fingure)	-	1000	-
4.2.10(Display of measured values)	-	500	-
4.2.10.1(By inspection)	-	500	-
4.2.10.2(By inspection)	-	500	-
4.2.10.3(By measurement)	-	500	-
4.2.10.4(By inspection)	-	500	-
4.2.10.5(By inspection)	-	500	-
4.2.10.6(By inspection)	-	500	-
4.2.10.7(By inspection)	-	500	-
4.2.10.8(Fig. 4, annexure F)	-	500	-
4.2.10.9(Fig. 5, annexure F)	-	500	-
4.2.11(By inspection)	-	500	-
4.2.11.1(By inspection)	-	500	-
4.2.12(Test on Token Carrier Interface)	-	500	-
4.6.3(Limits of error due to Ambient temperature Variation)	-	500	-
4.6.6.2.2(Performance requirement for load switching Utilization category UC2 (Annex G.))	-	1500	-
4.6.6.2.2 & G2(Normal operation)	-	2000	-
4.6.6.2.2 & G3(Electrical endurance)	-	2000	-
4.6.6.2.2 & G4(Line to load voltage surge withstand)	-	1500	-
4.6.6.2.2 & G5(Fault current making capacity)	-	1500	-
4.6.6.2.2 & G6(Short circuit current carrying capacity)	-	2000	-
4.6.6.2.2 & G7(Minimum switched current)	-	2000	-
4.6.6.2.2 & G8(Dielectric strength)	-	1500	-
3.12.6, 4.6.6.2.1 & 5.1.7(Load Switching Capability (UC1))	-	1500	-
4.2.10.8(General requirements- Mechanical and electrical characteristics)	-	1000	-
4.2.10.9(General requirements- Optical characteristics)	-	1000	-
4.2.12.3(Keypad Interface)	-	50	-
4.6.6.2 , annexure G -8(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	1500	-
4.6.6.2 , annexure G -7(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	1500	-
4.6.6.2 , annexure G -6(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	1500	-
4.6.6.2 , annexure G -5(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	1500	-
4.6.6.2 , annexure G -4(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	1500	-
4.6.6.2 , annexure G -3(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	2000	-
4.6.6.2 , annexure G -2(Performance requirements for Prepayment Meters with Load switching utilization category UC2 and UC3)	-	2000	-
4.6.6.2 .1(Load switching capability)	-	2000	-
4.6.6.1 , annexure D - 4.3(Test of crystal Controlled Clocks in Payment Meters)	-	2000	-
4.6.6.1 , annexure D - 4.2(Test of crystal Controlled Clocks in Payment Meters)	-	2000	-
4.6.6.1 , annexure D - 4.1(Test of crystal Controlled Clocks in Payment Meters)	-	1500	-
4.6.6.1 , annexure D - 3.2.3(Test of crystal Controlled Clocks in Payment Meters)	-	1500	-
4.6.6.1 ,annexure D - 3.2.2(Test of crystal Controlled Clocks in Payment Meters)	-	1500	-
4.6.6.1 ,annexure D - 3.2.1(Test of crystal Controlled Clocks in Payment Meters)	-	1500	-

31 Dec, 2026

-
Included w.e.f. 28-04-2022.

IS 14494 (2019)

Elastomer insulated flexible cables for use in mines - Specification (First Revision)

200000 View breakup
For BIS Samples: 1.5 times of BIS Testing Charges and other for 1.1kV- Rs.55,000/- 3.3kV- Rs.70,000/- 3.8/6.6kV- Rs.75,000.00/- 6.35/11kV- Rs.2,00,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Table 33(a)(Annealing test)	-	2000	For 1.1 kV - 55000.00/- 3.3 kV - 70000.00/- 3.8/6.6 kV – 75000.00/- 6.35/11 kV – 200000/-
Table 33(a)(Conductor resistance test)	-	2500	-
5(INSULATION)	-	500	-
7.1(TAPE : Proofed Tape)	-	500	-
7.2(TAPE : Polyethylene Terephalate (PETP) or Polypropylene Base Tape)	-	500	-
7.3(TAPE )	-	500	-
8(CENTRE)	-	500	-
9.1(FILLERS)	-	500	-
9.2(FILLERS)	-	500	-
11.1(ARMOUR)	-	500	-
11.2(ARMOUR)	-	500	-
11.2 a)(ARMOURING: Tensile Strength)	-	500	-
11.2 b)(ARMOURING: Elongation )	-	500	-
11.2 c)(ARMOURING: Torsion Test (For round wire ) )	-	1250	-
11.2 d)(ARMOURING: Uniformity of zinc coating)	-	2250	-
11.2 e)(ARMOURING: Mass of zinc coating )	-	2250	-
12.1(SHEATH : Inner Sheath)	-	500	-
12.2(SHEATH : Outer Sheath)	-	500	-
17.1(INSULATION SCREEN)	-	500	-
17.2(INSULATION SCREEN)	-	500	-
17.3(INSULATION SCREEN)	-	500	-
17.4(INSULATION SCREEN)	-	500	-
18(PROTECTIVE SCREEN)	-	500	-
27.8(Flammability Test)	-	1500	-
13.1(REINFORCEMENT MATERIAL : Tape)	-	1000	-
Table 33(d)(Hot set on Insulation)	-	3500	-
Table 33(f)(Insulation resistance)	-	3500	-
Table 33(h), Cl. No. 27.2(Partial discharge test)	-	30000	-
21.1(LAYING UP OF CORES)	-	500	-
21.2(LAYING UP OF CORES)	-	500	-
21.3(LAYING UP OF CORES)	-	500	-
21.4(LAYING UP OF CORES)	-	500	-
23.1(ARMOURING)	-	500	-
23.2(ARMOURING)	-	500	-
23.3(ARMOURING)	-	500	-
23.4(ARMOURING)	-	500	-
Table 33(d)(Elongation at break on Insulation)	-	2500	-
Table 33(e)(Elongation at break on Sheath)	-	2500	-
13.2(REINFORCEMENT MATERIAL : Cord/Yarns)	-	500	-
Table 33(e)(Oil resistance - Elongation on sheath)	-	4000	-
Table 33(e)(Oil resistance - Tensile strength on sheath)	-	4000	-
Table 33(e)(Tear resistance on sheath)	-	4000	-
Table 33(d)(Ozone resistance on Insulation)	-	15000	-
5.2(Pilot and Earth Cores)	-	500	-
10(CRADLE SEPARATOR)	-	500	-
16.1(INSULATION)	-	500	-
16.2(INSULATION : Thickness of Insulation)	-	2500	-
16.3(INSULATION : Tolerance on Insulation Thickness)	-	2500	-
16.4(INSULATION : Application of Insulation)	-	500	-
16.5(INSULATION)	-	500	-
28(IDENTIFICATION)	-	500	-
29.1(PACKING AND MARKING)	-	750	-
29.2(PACKING AND MARKING)	-	750	-
14.1(CONSTRUCTION : CONDUCTOR)	-	500	-
14.2(CONSTRUCTION : CONDUCTOR)	-	500	-
14.3(CONSTRUCTION : CONDUCTOR)	-	500	-
14.4(CONSTRUCTION : CONDUCTOR)	-	500	-
Table 33(j), Cl. No. 27.4(Dielectric Power Factor (as a function of Voltage))	-	30000	-
Table 33(n), Cl. No. 27.7(High Voltage test for 4 hrs.)	-	15000	-
Table 33®, Annex E(Electric tset on semi-conducting screen)	-	12000	-
27.2(Bending test followed by partial discharge test;)	-	12000	-
27.4(Dielectric power factor test)	-	30000	-
27.5(Heating cycle test followed by partial discharge test;)	-	25000	-
27.6(Impulse voltage test; and)	-	1250	-
4(CONDUCTOR)	-	500	-
5.1(Power Cores)	-	500	-
6(SEMI-CONDUCTING COMPOUND)	-	500	-
15(CONDUCTOR SCREENING)	-	500	-
19.1(Individual Core Screen)	-	500	-
19.2(Collective Screen)	-	500	-
20.1(CORE IDENTIFICATION)	-	500	-
20.2(Colour Scheme for Identification)	-	500	-
20.3(Scheme for Identification by Numbering)	-	500	-
22.1(INNER SHEATH)	-	500	-
22.2(Thickness of Inner Sheath)	-	2500	-
22.3(INNER SHEATH)	-	500	-
24.1(OUTER SHEATH)	-	500	-
24.2(Thickness of Outer Sheath)	-	2500	-
24.3(Tolerance on Thickness of Outer Sheath)	-	2500	-
24.4(OUTER SHEATH)	-	500	-
25.1(CABLE CONSTRUCTION AND DIMENSIONS)	-	1500	-
27.9(Water Absorption Test)	-	5000	-
30(BIS CERTIFICATION MARKING)	-	500	-
Table 33(e)(Permanent set on Sheath)	-	500	-
Table 33(e)(Hot set on Sheath)	-	3500	-
Table 33(e)(Ageing in air bomb - Elongation on Sheath)	-	4500	-
Table 33(e)(Ageing in air bomb - Tensile strength on Sheath)	-	4500	-
Table 33(e)(Tensile strength on Sheath)	-	2500	-
Table 33(d)(Permanent set on Insulation)	-	500	-
Table 33(d)(Ageing in air bomb - Elongation on Insulation)	-	4500	-
Table 33(d)(Ageing in air bomb - Tensile strength on Insulation)	-	4500	-
Table 33(d)(Ageing in air oven - Elongation on Insulation)	-	4000	-
Table 33(d)(Ageing in air oven - Tensile strength on Insulation)	-	4000	-
Table 33(d)(Tensile strength on Insulation)	-	2500	-
Table 33(c)(Resistivity of steel wire)	-	500	-
Table 33(b)(Diameter of armour wire)	-	500	-

31 Dec, 2026

-
Included w.e.f. 28-04-2022.

IS 14220 (2018)

Openwell submersible pumpsets - Specification (First Revision)

20000 View breakup
For BIS Samples: 1.5 times of BIS Testing Charges and other upto 15 Kw Rs.15,000/- Each Additional Kw Rs.1,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.1(Design Features)	-	100	Upto 15 kW : 15000 Rs 16 to 20 kW - 20000 Rs
8.1.1(Design Features)	-	100	-
8.1.4(Design Features)	-	100	-
8.1.5(Design Features)	-	100	-
8.1.5(Design Features)	-	100	-
8.1.7(Design Features)	-	100	-
9(Efficiency)	-	500	-
10(Performance (Cl 17.1 of IS 5120))	-	100	-
10(Suction and Delivery Ends (Cl 17.2 of IS 5120))	-	100	-
10(Suction and Delivery Ends (Cl 17.2.1 of IS 5120))	-	100	-
10(Fluid Passages (Cl 17.3 of IS 5120))	-	100	-
10(Draining Plugrs (Cl 17.4 of IS 5120))	-	100	-
10(Lantern Ring (Cl 17.5 of IS 5120))	-	100	-
10(Casing (Cl 17.6 of IS 5120))	-	100	-
10(Impeller (Cl 17.7 of IS 5120))	-	100	-
10(Shaft (Cl 17.8 of IS 5120))	-	100	-
10(Shaft Couplings (Cl 17.9 of IS 5120))	-	100	-
10(Bearings (Cl 17.10 of IS 5120))	-	100	-
10(Bearings (Cl 17.10.1 of IS 5120))	-	100	-
10(Bearings (Cl 17.10.2 of IS 5120))	-	100	-
10( Stuffing Boxes (Cl 17.11 of IS 5120))	-	100	-
10(Base Plates (Cl 17.12 of IS 5120))	-	100	-
10(Prime Mover (Cl 17.13 of IS 5120))	-	100	-
10(Name Plate (Cl 17.14 of IS 5120))	-	100	-
10(Name Plate (Cl 17.14 of IS 5120))	-	100	-
10(Name Plate (Cl 17.14 of IS 5120))	-	100	-
10(Name Plate (Cl 17.14.1 of IS 5120))	-	100	-
10.2(Casing)	-	100	-
10.3(Impeller)	-	100	-
10.4.1(Shaft)	-	100	-
10.4.2(Shaft)	-	100	-
10.5.1(Balancing)	-	100	-
10.5.2(Balancing)	-	100	-
10.5.3(Balancing)	-	100	-
10.5.4(Balancing)	-	100	-
10.6.1( Provision for Earthing)	-	100	-
10.6.2( Provision for Earthing)	-	100	-
10.6.3( Provision for Earthing)	-	100	-
10.6.4( Provision for Earthing)	-	100	-
10.7.1(Terminal Marking and Direction of Rotation)	-	500	-
10.7.2(Terminal Marking and Direction of Rotation)	-	500	-
10.7.3(Terminal Marking and Direction of Rotation)	-	500	-
15.2(Laboratory Tests Cl.8 of IS 11346-2002 Rate of flow and head Cl.8 of IS 11346-2002)	-	1200	-
15.2(Laboratory Tests Cl.8 of IS 11346-2002 Efficiency Cl.8.3 of IS 11346-2002)	-	1200	-
15.5(Hydrostatic Pressure Test)	-	1200	-
16.1.1( Guarantee of Performance)	-	3000	-
16.1.2( Guarantee of Performance)	-	3000	-
16.1.3( Guarantee of Performance)	-	3000	-
16.1.4( Guarantee of Performance)	-	3000	-
16.1.5( Guarantee of Performance)	-	3000	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1.3(Marking)	-	500	-
7(Constructional features)	-	100	-
7.1(It is recognized that a number of materials of construction are available to meet the needs for pumps handling clear, cold water.)	-	100	-
7.2(Gaskets, seals and packings used for clear, cold water pumps shall conform to the applicable requirements specified in 5.2 of IS 5120.)	-	100	-
7.3(The motor shall be provided with a breathing attachment like bellows, diaphragm etc; to compensate the volumetric variation of water inside the motor due to change in the temperature.)	-	100	-
7.4(The motor shall be protected from ingress of well water, sand and other foreign matter by means of cable glands, rubber seals etc.)	-	100	-
7.5(All materials and components for the motor shall be suitable for application in respect of resistance and mechanical performance to protect it)	-	100	-
7.6(The rotor of the wet type open well submersible motor and rotor in water filled designed motor shall be provided with suitable coating from corrosion under water. However if suitable anticorrosion additive is added in the water, no separate protection on rotors is necessary.)	-	100	-
8(Design Features)	-	100	-
8.1.2(The multi-stage pump shaft may be guided through bearings, the bearings may be provided in stage casing, suction housing and discharge casing, while in case of intermediate bearings, suitable positions may be selected in the overall span.)	-	100	-
8.1.3(The pump may be equipped with replaceable bearing and wearing ring, wherever provided.)	-	100	-
8.1.4(The strainer on the suction shall offer the best compromise amongst restraining large solids from entering the pump and containing the suction losses to the minimum.)	-	100	-
8.1.5(The pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage and supply frequency at minimum +5 percent and minimum –15 percent of the guaranteed duty point head up to 30 m. Above 30 m, the pump shall be capable to give discharge without overloading the prime mover within the permissible current at rated voltage and supply frequency at minimum +10 percent and minimum –25 percent of the guaranteed duty point head.)	-	100	-
12(Cable)	-	200	-
12.1(Flat/Round cables as per IS694 shall be used)	-	200	-
12.1.2(The size of the conductor shall be adequate and suitable for contineous use under water and in air. the length of the cable shall be minimum 2 m externallly unless otherwise specified by the customer)	-	200	-
12.1.3(The size and of the cable should be suitably selected so that the voltage drop between control panel and the mptor terminal does not exeed three percent of the rated voltage)	-	200	-
12.1.4(In case a joint is required to be made between the lead cable supplied with the motor and the user’s cable, a detailed procedure to make water tight joining shall be supplied by the motor manufacturer.)	-	200	-
12.1.5(If four core cable is used, the fourth core is to be used for earthing.)	-	200	-
14.10.1(Type test)	-	500	-
14.10.1(a)(Insulation Resistance test)	-	500	-
14.10.1(b)(High Voltage test)	-	1000	-
14.10.1(c)(Measurement of stator resistance)	-	750	-
14.10.1(d)(No load test at rated voltage)	-	1000	-
14.10.1(e)(Reduced voltage running up test at no load)	-	1000	-
14.10.1(f)(Locked rotor)	-	750	-
14.10.1(g)(Breakaway (starting) torque)	-	750	-
14.10.1(h)(Leakage current test;)	-	750	-
14.10.1(j)(Temperature rise test at rated voltage)	-	750	-
14.10.1(k)(Temperature rise test at reduced voltage)	-	750	-
16.1(Guarntee of Performance)	-	3000	-
16.1.1(The pumpset shall be guaranteed for their performance of the nominal volume rate of flow and the nominal head at the guaranteed duty point. The overall efficiency of the pumpset shall be guaranteed at the declared duty point only.)	-	3000	-
16.1.2(The guarantee shall be deemed to have been met with, if the measured values of head, volume rate of flow and overall efficiency are within the indicated in IS 11346 limits)	-	3000	-
16.1.3(Open well submersible motor shall not get overloaded in the specified operating head range at rated voltage and supply frequency.)	-	3000	-
16.1.4(The pump shall be tested for the operating head range as per 8.1.5.)	-	3000	-
16.1.5(The overloading of motor is that condition when maximum current drawn by the motor exceeds the limit of 1.07 times of the rated motor current)	-	3000	-
16.1.6(The tolerance shall apply to guaranteed duty point only.)	-	3000	-
16.1.7(Performance at rated voltage and supply frequency is actual performance of the set. This is better than performance at rated speed, since in the entire operating head range speed of motor is higher than rated speed, as motor is running in under loaded condition.)	-	750	-
16.1.8(The manufacturer shall specify the minimum submergence of pump unit at duty point.)	-	750	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-
18.1(Marking)	-	500	-

31 Dec, 2026

-
Included w.e.f. 28-04-2022.

IS 13779 (2020)

ac STATIC WATTHOUR METERS CLASS 1 AND 2-Specefication

125000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12.7.6.2(Impulse voltage test)	-	1000	-
12.7.6.2(Impulse voltage tests for circuits and between the circuits)	-	1000	-
12.7.6.2(Impulse voltage test of electric circuits relative to earth)	-	500	-
12.7.6.3(ac high voltage test)	-	2000	-
12.7.6.4(Insulation resistance test)	-	1000	-
11.1(Test on limits of error due to variation of current)	-	1000	-
12.15 & 11.6(Test of meter constant)	-	1000	-
12.14 & 11.5(Test of starting condition)	-	750	-
12.13 & 11.4(Test of no-load condition)	-	750	-
12.12 & 11.3(Test of ambient temperature influence)	-	2000	-
12.16 & 11.7(Test of repeatability of error)	-	1000	-
11.2(Test on limits of error due to other influence quantities)	-	1500	-
12.7.1(Test of power consumption)	-	750	-
12.7.2(Test of influence of supply voltage)	-	750	-
12.7.2(Voltage interruptions of Vref=100% Interruption time: 1sec Number of interruptions: 3 Restoring time between interruptions: 50msec.)	-	750	-
12.7.3(Test of influence of short time over currents)	-	1500	-
12.7.4(Test of Influence of self heating)	-	1000	-
12.7.5(Test of influence of heating)	-	1000	-
12.8(Test of immunity to earth/phase fault)	-	1500	-
12.9.6(Radio Interference Measurement)	-	1000	-
12.9.4(Fast transient burst test)	-	17000	-
12.9.5(Surge Immunity Test)	-	22000	-
12.9.2(Test of Immunity to electrostatic discharge)	-	20000	-
12.9.3(Test of Immunity to electromagnetic HF field)	-	22000	-
12.6.1(Dry heat test)	-	2000	-
12.6.2(Cold test)	-	3000	-
12.6.3(Damp heat cyclic test)	-	3500	-
12.3.1(Shock test)	-	2000	-
12.3.2(Vibration test)	-	2000	-
12.3.3(Spring hammer test)	-	1000	-
12.5(Test of protection against penetration of dust and water)	-	1500	-
12.4(Test of resistance to heat and fire)	-	2000	-
4(Classification)	-	500	-
5.1(Standard Reference Voltages)	-	100	-
5.2(Standard Basic Currents)	-	100	-
5.3(Rated Maximum Current)	-	100	-
5.4(Standard Frequency)	-	100	-
6.1(General)	-	300	-
6.2(Meter Case)	-	300	-
6.3(Window)	-	200	-
6.4(Terminals, terminal block and protective earth terminal)	-	300	-
6.5(Terminals covers and Extended Terminal Cover)	-	300	-
6.6(Clearance and creepage distances)	-	1000	-
6.7(Insulating encased meter)	-	300	-
6.10(Display of measured values)	-	500	-
6.11(Output device)	-	500	-
7.1(Name Plate)	-	150	-
7.2(Connection diagrams and terminal marking)	-	150	-

31 Dec, 2026

-
Included w.e.f. 28-04-2022.

IS 12615 (2018)

Line operated three phase AC motors (IE Code) "Efficiency classes and performance specification" (Third Revision)

20250 View breakup
For BIS Samples:1.5 times of BIS Testing Charges and other upto 11Kw Rs.20,250/- Each Additional Kw Rs.1,000/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.0(Earthing)	-	100	UPTO 10 kW : 15000 RS 11 kW TO 20 kW : 20250 RS
9.0(Terminal Marking)	-	100	-
11.0(DUTY AND RATING)	-	100	-
Cl. 12.2(Pull up test)	-	100	-
Cl. 15.2(rating)	-	750	-
15.3.2(Marking)	-	750	-
16.1.1(Insulation Resistance Test)	-	750	-
16.1.2(Measurement of Resistance of Windings of Stator)	-	750	-
16.1.3(No Load Test)	-	750	-
16.1.4(Locked Rotor Readings of Voltage, Current and Power Input at a Suitable Reduced Voltage)	-	750	-
16.1.5(5 Reduced Voltage Running up Test at no-load (for squirrel cage motor up to 37 kW only))	-	750	-
16.1.6(High Voltage Test)	-	750	-
16.2.1(Dimensions)	-	250	-
16.2.2(Locked Rotor Test)	-	500	-
16.2.2.1(Locked Rotor Test)	-	100	-
16.2.2.2(Locked Rotor Test)	-	100	-
16.2.2.2.1(Locked Rotor Test)	-	100	-
16.2.2.3(Determination of starting characteristics -locked rotor current)	-	100	-
16.2.2.3.1(Direct proportion method)	-	100	-
16.2.3(Full Load Test to Determine Efficiency, Power Factor and Slip)	-	1250	-
16.2.4(Temperature Rise Test)	-	750	-
16.2.5(Momentary Overload Test)	-	750	-
16.3.1( Test for Vibration Severity of Motor)	-	500	-
16.3.2( Test for Noise Levels of Motor)	-	500	-
16.3.3( Test for Degree of Protection by Enclosure)	-	750	-
16.3.4(Over Speed Test)	-	500	-
16.3.5( Temperature Rise Test at Limiting Values of Voltage and Frequency Variation)	-	500	-
18.3(Marking)	-	250	-
Cl. 18.1(Marking and labelling)	-	250	-
Cl. 18.2(Marking and labelling)	-	250	-
Cl. 9(Terminal marking)	-	500	-
Cl. 16.2.5(Momentary overload test)	-	500	-
16.1.1(Insulation Resistance Test)	-	500	-
Cl. 18.3(BIS Certification Marking)	-	500	-
12.2(Pull up torque)	-	100	-

31 Dec, 2026

-
Included w.e.f. 28-04-2022.

IS 9968 : Part 1 (1988)

Specification for elastomer insulatedcables: Part 1 for working voltages up to and including 1100 volts (First Revision)

12000 View breakup
Single core Rs.12,000/- additional each extra core Rs.1,500/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21. (a)(Persulphate tests (for copper))	-	500	-
21.1( Tensile strength )	-	250	-
22.1( Elongation)	-	250	-
21.1(type test : Ageing In air oven)	-	250	-
21.1(type test : Ageing in air bomb)	-	250	-
21.1(type test : Ageing In oxygen bomb)	-	250	-
21.1(type test : Hot set elongation)	-	250	-
21.1(type test : Tear resistance )	-	250	-
22.2(type test :Insulauon resistance High voltage (water immersron ) test)	-	250	-
22.2(type test : Flammability test ( applicable to cables finished With SE 3 and SE 4 sheaths only) )	-	250	-
21. (b)(Annealing Test (for coper))	-	500	-
21. (e)(Conductor Resistance )	-	500	-
3.1( Copper Cooduetor)	-	250	-
3.2(Aluminium conductor)	-	250	-
4.1(INSULATION : lnsulation for General Service)	-	500	-
4.2(INSULATION : Heat Resisting insulation)	-	500	-
4.3(INSULATION : Silicone Rubber Insulation)	-	500	-
5.1(TAPE : Proofed Tape)	-	200	-
5.2(TAPE : 2 Polyethyl_ Terephthalate ( PETP ) Tape or Plastic: Tape or Any Other SlIIitable Tape )	-	200	-
5.3(TAPE : Giass Tape)	-	200	-
6.1(FILLERS : )	-	200	-
7.1(BRAID : Textile Braid)	-	200	-
7.2(BRAID : Glass Braid )	-	100	-
8.1(SHEATH : General Service Insulated Cables and Flexible Cords)	-	100	-
8.2(SHEATH :Heat Resisting Insulated Cables)	-	100	-
9.1(PresenRtive Compound)	-	100	-
9.2(Varnish)	-	100	-
10( Conductor )	-	500	-
11(Separator tape)	-	200	-
12.2(Insulation : Thickness of Insufatien)	-	200	-
12.4(Insulation : Allplication of Insulation)	-	200	-
13(CORE IDENTiFICATlON)	-	200	-
14(Tape)	-	200	-
15(BRAIDING)	-	200	-
16(COMPOUNDING AND VARNISHING)	-	100	-
17(LAYING UP OF CORES)	-	100	-
18( Binder tape)	-	100	-
19.2(Sheath : Thickness of Sheath)	-	100	-
19.4( Sheath :Colour)	-	100	-
20( Overall diameter)	-	100	-
21. (c)( Tensile Test (for aluminium))	-	100	-
21. (d)( Wrapping Test (for aluminium))	-	200	-
21(Water absorption test)	-	500	-
23(identification)	-	200	-
Cl No. 4.1(Ageing in oxygen bomb - Elongation)	-	200	-
Cl No. 4.1(Ageing in oxygen bomb - Tensile strength )	-	200	-
Cl No. 4.1(Ageing in air bomb - Elongation)	-	200	-
Cl No. 4.1(Ageing in air bomb - Tensile strength )	-	200	-
Cl No. 4.1(Ageing in air oven - Elongation)	-	200	-
Cl No. 4.1(Ageing in air oven - Tensile strength )	-	200	-
Cl No. 22.2(High Voltage Test (Water Immersion))	-	200	-
Cl No. 4.1(Insulation resistance)	-	200	-
Cl No. 23.1, 23.2(Identification)	-	200	-
Cl No. 22.2.2/22.2.3(High Voltage Test / Spark test)	-	500	-

31 Dec, 2026

-
Included w.e.f. 28-04-2022.

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

16500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	50.00	-
7.1.1(Accessories Classification)	-	50.00	-
7.1.2(Accessories Classification)	-	50.00	-
7.1.3(Accessories Classification)	-	50.00	-
7.1.4(Accessories Classification)	-	50.00	-
7.1.5(Accessories Classification)	-	50.00	-
7.2.1(Socket-Outlets Classification)	-	50.00	-
7.2.2(Socket-Outlets Classification)	-	50.00	-
7.2.3(Socket-Outlets Classification)	-	50.00	-
7.2.4(Socket-Outlets Classification)	-	50.00	-
7.3(Plug Classification)	-	50.00	-
8.1(MARKING)	-	50.00	-
8.8(MARKING)	-	50.00	-
8.9(MARKING)	-	50.00	-
9.1(CHECKING OF DIMENSIONS)	-	100.00	-
9.2(CHECKING OF DIMENSIONS)	-	100.00	-
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	50.00	-
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	50.00	-
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	50.00	-
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	50.00	-
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	50.00	-
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	50.00	--
11.1(PROVISIONS FOR EARTHING)	-	1000	-
11.2(PROVISIONS FOR EARTHING)	-	1000	-
11.3(PROVISIONS FOR EARTHING)	-	50.00	-
11.4(PROVISIONS FOR EARTHING)	-	50.00	-
11.5(PROVISIONS FOR EARTHING)	-	50.00	-
11.6(PROVISIONS FOR EARTHING)	-	50.00	-
12.1.1(TERMINALS)	-	50.00	-
12.1.2(TERMINALS)	-	50.00	-
12.2.1(TERMINALS)	-	50.00	-
12.2.2(TERMINALS)	-	50.00	-
12.2.3(TERMINALS)	-	50.00	-
12.2.4(TERMINALS)	-	50.00	-
12.2.5(TERMINALS)	-	50.00	-
12.2.6(TERMINALS)	-	100.00	-
12.2.7(TERMINALS)	-	100.00	-
12.2.8(TERMINALS)	-	100.00	-
12.2.9(TERMINALS)	-	100.00	-
12.2.10(TERMINALS)	-	100.00	-
12.2.11(TERMINALS)	-	50.00	-
12.3.1(TERMINALS)	-	50.00	-
12.3.2(TERMINALS)	-	50.00	-
12.3.3(TERMINALS)	-	50.00	-
12.3.4(TERMINALS)	-	50.00	-
12.3.5(TERMINALS)	-	50.00	-
12.3.6(TERMINALS)	-	50.00	-
12.3.7(TERMINALS)	-	50.00	-
12.3.8(TERMINALS)	-	50.00	-
12.3.9(TERMINALS)	-	100.00	-
12.3.10(TERMINALS)	-	200.00	-
12.3.11(TERMINALS)	-	200.00	-
12.3.12(TERMINALS)	-	100.00	-
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
15(INTERLOCKED SOCKET-OUTLETS)	-	200.00	-
16.1(RESISTANCE TO AGEING,)	-	200.00	-
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	200.00	-
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	200.00	-
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	200.00	-
18(OPERATION OF EARTHING CONTACTS)	-	100.00	-
19(TEMPERATURE RISE)	-	200.00	-
20(BREAKING CAPACITY)	-	100.00	-
21(NORMAL OPERATION)	-	300.00	-
22.1(Verification of the Maximum Withdrawal Force)	-	50.00	-
22.2(Verification of Minimum Withdrawal Force)	-	50.00	-
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	100.00	-
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	100.00	-
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	100.00	-
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	100.00	-
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	150.00	-
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	150.00	-
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	150.00	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies other than elastomeric or thermoplastic material)	-	150.00	-
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	150.00	-
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	100.00	-
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	100.00	-
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	100.00	-
24.4(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	100.00	-
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	100.00	-
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	100.00	-
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	100.00	-
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	100.00	-
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	100.00	-
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	100.00	-
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	100.00	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	100.00	-
24.1(MECHANICAL STRENGTH For Plug (1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	100.00	-
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	50.00	-
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	50.00	-
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	150.00	-
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	150.00	-
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	150.00	-
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	150.00	-
24.15(MECHANICAL STRENGTH )	-	50.00	-
24.16(MECHANICAL STRENGTH )	-	50.00	-
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	50.00	-
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	50.00	-
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	100.00	-
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	100.00	-
25.4(RESISTANCE TO HEAT )	-	100.00	-
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100.00	-
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100.00	-
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100.00	-
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100.00	-
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100.00	-
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100.00	-
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100.00	-
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100.00	-
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	50.00	-
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	50.00	-
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	100.00	-
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	100.00	-
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	200.00	-
29(RESISTANCE TO RUSTING)	-	100.00	-
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	100.00	-
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	100.00	-
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	100.00	-
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	100.00	-
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	50.00	-
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	100.00	-
16.3(Resistance to Humidity)	-	100.00	-
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50.00	-
8.7(Marking)	-	50.00	-
8.6(Marking)	-	50.00	-
8.5(Marking)	-	50.00	-
8.4(Marking)	-	50.00	-
8.3(Marking)	-	50.00	-
8.2(Marking)	-	50.00	-
10.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	50.00	-
23.2(FLEXIBLE CABLES AND THEIR CONNECTION)	-	50.00	-
24.17(MECHANICAL STRENGTH)	-	50.00	-
24.18(MECHANICAL STRENGTH)	-	50.00	-
24.19(MECHANICAL STRENGTH)	-	50.00	-
28.1(RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT, TO FIRE AND TO TRACKING)	-	50.00	-
27(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100.00	-
26(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	100.00	-
25(RESISTANCE TO HEAT)	-	100.00	-
24.14(MECHANICAL STRENGTH)	-	100.00	-
24(MECHANICAL STRENGTH)	-	100.00	-
23(FLEXIBLE CABLES AND THEIR CONNECTION)	-	100.00	-
22.1.2(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	100.00	-
22.1.1(FORCE NECESSARY TO WITHDRAW THE PLUG)	-	100.00	-
19.3(TEMPERATURE RISE)	-	100.00	-
19.2(TEMPERATURE RISE)	-	100.00	-
19.1(TEMPERATURE RISE)	-	100.00	-
17.1.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	100.00	-
17.1.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	100.00	-
16.2.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	100.00	-
16.2.1.2(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	100.00	-
16.2.1.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	100.00	-
16.2.1(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	100.00	-
16(RESISTANCE TO AGEING, TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	50.00	-
14.10.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.10.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14.10.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	50.00	-
13.7.3 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.7.2 (CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
13.7.1(CONSTRUCTION OF FIXED SOCKETOUTLETS)	-	50.00	-
12.3.11 (b)(TERMINALS)	-	100.00	-
12.3.11 (a)(TERMINALS)	-	100.00	-
10.2.2(PROTECTION AGAINST ELECTRIC SHOCK)	-	50.00	-

31 Dec, 2026

-
Included w.e.f. 28-04-2022

1
2
3
Next
Last

Bureau of Indian Standards

The National Standards Body of India

DELHI TEST HOUSE (65) KUNDLI-2 SONIPAT

Plot No. 65, Phase-IV, Sector-57, HSIDC Industrial Area, Behind Parnami Hospital, Kundli,, SONIPAT, Sonipat, Haryana, 131028

9810442016 rohit@delhitesthouse.com

Scope List