BIS - LIMS (Laboratory Information Management System)

Matrix Test Labs

PLOT NO 28 BADLI INDUSTRIAL AREA, delhi, New Delhi, Delhi, 110042

9560422022 matrixtestlab@gmail.com

Scope List

Reset

33 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 16270 (2023)

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

700000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.1(Photovoltaic Energy System)	-	5000	10% discount to BIS
Cl-4.2(Secondary Cells and Batteries)	-	5000	10% discount to BIS
Cl-4.3(General Operating Conditions)	-	5000	10% discount to BIS
Cl-4.3.8(Storage)	-	5000	10% discount to BIS
Cl-4.3.9(Operating Temperature)	-	5000	10% discount to BIS
Cl-5.1(Mechanical Endurance)	-	5000	10% discount to BIS
Cl-5.2(Charge Efficiency)	-	5000	10% discount to BIS
Cl-5.3(Deep Discharge Protection)	-	5000	10% discount to BIS
Cl-5.4(Marking)	-	5000	10% discount to BIS
Cl-5.5(Safety)	-	5000	10% discount to BIS
Cl-5.6(Documentation)	-	5000	10% discount to BIS
Cl-6(Functional characteristice)	-	5000	10% discount to BIS
Cl-7(General test conditions)	-	5000	10% discount to BIS
Cl-8.1(Capacity Test)	-	50000	10% discount to BIS
Cl-8.2(Endurance Test)	-	500000	10% discount to BIS
Cl-8.3(Charge Retention Test)	-	20000	10% discount to BIS
Cl-8.4(Cycle Endurance in Photovoltaic Application (Extreme Conditions))	-	50000	10% discount to BIS
Cl-8.5(Sulphation Test (Applicable for Lead Acid Batteries only))	-	5000	10% discount to BIS
Cl-8.6(Water Loss Test (Valid for Flooded Lead Acid Batteries only))	-	5000	10% discount to BIS
Cl-9.1(Type Tests)	-	1000	10% discount to BIS
Cl-9.2(Acceptance Test)	-	1000	10% discount to BIS
4.3.7.1(Specific gravity)	-	3000	10% discount to BIS

31 Dec, 2026

-
-

IS 302 : Part 2 : Sec 59 (2024)

Household and Similar Electrical Appliances â Safety Part 2 Particular Requirements Section 59 Insect Killers (First Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 32 302-2-59 : 1999(Radiation Hazards)	-	1000	-
Cl. 31 302-2-59 : 1999(Resistance to Rusting)	-	1000	-
Cl. 30 302-2-59 : 1999(Resistance to Heat Fire & Tracking )	-	1000	-
Cl. 29 302-2-59 : 1999(Clearances, Creepage Distances & Solid insulation )	-	1000	-
Cl. 28 302-2-59 : 1999(Screws & Connections)	-	1000	-
Cl. 27 302-2-59 : 1999(Provision for Earthing )	-	1000	-
Cl. 26 302-2-59 : 1999(Terminals for External conductors )	-	1000	-
(CI. 6 IS 302-2-59 : 1999(Classification )	-	500	-
Cl. 7 302-2-59 : 1999(Marking)	-	500	-
Cl. 8 302-2-59 : 1999(Protection Against Electric Shock )	-	1000	-
Cl. 9 302-2-59 : 1999(Starting of motor operated appliances)	-	500	-
Cl. 10 302-2-59 : 1999(Power Input and Current )	-	1500	-
Cl. 11 302-2-59 : 1999(Temperature Rise)	-	1500	-
Cl. 13 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature)	-	1000	-
Cl. 14 302-2-59 : 1999(Radio and television interference suppression / Transient over voltages)	-	1000	-
Cl. 15 302-2-59 : 1999(Moisture Resistance Test )	-	1000	-
Cl. 16 302-2-59 : 1999(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	1000	-
Cl. 17 302-2-59 : 1999(Overload Protection of Transformers and Associated Circuit)	-	1000	-
Cl. 18 302-2-59 : 1999(Endurance)	-	0	-
Cl. 20 302-2-59 : 1999(Stability & Mechanical Hazards)	-	1000	-
Cl. 19 302-2-59 : 1999(Abnormal Operation )	-	1500	-
Cl. 21 302-2-59 : 1999(Mechanical strength)	-	1000	-
Cl. 22 302-2-59 : 1999(Construction )	-	1000	-
Cl. 23 302-2-59 : 1999(Internal Wiring)	-	1000	-
Cl. 25 302-2-59 : 1999(Supply Connection & External Flexible Cords)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	1000	-
27(PROVISION FOR EARTHING)	-	1000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	1000	-
6(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	1000	-
5(General conditions for the tests)	-	500	-
10(Power input and current)	-	1500	-
11(Heating)	-	1500	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
14(Transient overvoltages)	-	1000	-
15(MOISTURE RESISTANCE)	-	1000	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	500	-
11.3(Heating)	-	500	-
20("STABILITY AND MECHANICAL HAZARDS")	-	500	-
19(ABNORMAL OPERATION)	-	1500	-
21(MECHANICAL STRENGTH)	-	500	-
22(CONSTRUCTION)	-	500	-
23(INTERNAL WIRING)	-	500	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	500	-
4(General)	-	500	-
12(Charging of metal-ion batteries)	-	1000	-
11.7(Heating)	-	500	-
11.8(Heating)	-	500	-

31 Dec, 2026

-
Included w.e.f 09.02.2026 "19.11.4.1 (Electrostatic discharges) 19.11.4.2 (Radiated fields) 19.11.4.3 (Fast transient bursts) 19.11.4.4 (Voltage surges) 19.11.4.5 (Injected currents) 19.11.4.6 (Class 3 Voltage dips and interruptions) 19.11.4.7 (Mains signals) 24 (COMPONENTS)"

IS 302 : Part 1 (2024)

Household and Similar Electrical Appliances â Safety Part 1 General Requirements (Seventh Revision)

45000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
12(Charging of metal-ion batteries)	-	500	-
6(Classification- IS 302-1)	-	100	-
5(General conditions for the tests)	-	100	-
11.8(Temperature rise)	-	500	-
11.6(Combined appliances)	-	500	-
11.5(Motor-operated appliances)	-	500	-
11.4(Heating appliances)	-	500	-
8.1.5(Live parts of built-in appliances)	-	500	-
17(Overload protection of transformers and associated circuits)	-	500	-
16(Leakage current and electric strength)	-	500	-
4(General requirement)	-	100	-
32.1(Radiation Toxicity and Similar Hazards)	-	500	-
31(Resistance to Rusting)	-	500	-
30.2(Needle Flame Test)	-	500	-
30.2(Glow Wire Test)	-	500	-
30.1(Ball pressure test)	-	500	-
29(clearance, creepage distances and solid insulation)	-	500	-
28(Screw test and connections)	-	500	-
26(Terminals for external conductors)	-	500	-
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
23.1(Internal Wiring, IS 302-1)	-	500	-
22.1(Construction, IS 302-1)	-	500	-
21.1(Mechanical Strength, IS 302-1)	-	500	-
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	-
19(Abnormal Operation)	-	1500	-
18(Endurance)	-	0	-
17(Over Load Protection of Transformers and associated circuits)	-	500	-
16.3(Electric Strength (after clause 15 and 16.2))	-	500	-
16.2(Leakage Current (after Clause 15))	-	500	-
16.1(General)	-	500	-
16.0(General)	-	1500	-
15.3(Humidity Test)	-	500	-
15.2(Spillage Test)	-	500	-
15.1(Ingress Protection test other than IPX0 (IP test))	-	500	-
15.0(Moisture resistance)	-	1500	-
14(Transient Over Voltages)	-	500	-
13.3(Electric Strength at operating temperature)	-	500	-
13.2(Leakage current at operating temperature)	-	500	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
11.3(Heating)	-	500	-
11.2(General)	-	500	-
11.1(General)	-	500	-
10.2(Current input)	-	500	-
10.1(Power input)	-	500	-
9(Starting of motor operation test requirements and tests)	-	0	-
8.1.4(Protection against live parts against protective impedance)	-	500	-
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	-
8.1.2(Protection against live parts in openings)	-	500	-
8.1.1(Protection against live parts in all positions)	-	500	-
7(Marking and instructions)	-	500	-
A.2(Earth continuity test)	-	1000	-
Annex C(Ageing test on motors)	-	500	-
Annex D(Thermal motor protectors)	-	500	-
15.2(Moisture resistance)	-	500	-
19.17(Abnormal Operation, IS 302-1)	-	500	-
20.2(Stability & Mechanical Hazards, IS 302-1)	-	500	-
21.2(Mechanical Strength, IS 302-1)	-	500	-
21.3(Mechanical Strength, IS 302-1)	-	500	-
22.5(Construction)	-	500	-
22.6(Construction, IS 302-1)	-	500	-
22.11(Construction, IS 302-1)	-	500	-
22.16(Construction)	-	500	-
22.32(Construction, IS 302-1)	-	500	-
22.42(Construction)	-	500	-
23.3(Internal Wiring, IS 302-1)	-	500	-
25.6(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
26.5(Terminals for external conductors)	-	500	-
27.5(Provision for Earthing, IS 302-1)	-	500	-
28.1(Screws and connections)	-	500	-
22.2(Construction, IS 302-1)	-	500	-
22.3(Construction, IS 302-1)	-	500	-
B.22.4(Construction, IS 302-1)	-	500	-
B.22.5(Construction, IS 302-1)	-	500	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.1(Marking- IS 302-1)	-	100	-
7.3(Marking- IS 302-1)	-	100	-
7.4(Marking- IS 302-1)	-	100	-
7.5(Marking- IS 302-1)	-	100	-
7.6(Marking- IS 302-1)	-	100	-
7.7(Marking- IS 302-1)	-	100	-
7.8(Marking- IS 302-1)	-	100	-
7.9(Marking- IS 302-1)	-	100	-
7.1O(Marking- IS 302-1)	-	100	-
7.11(Marking- IS 302-1)	-	100	-
7.12(Marking- IS 302-2-15)	-	100	-
7.13(Marking- IS 302-1)	-	100	-
6(Classification- IS 302-1)	-	100	-
7.15(Marking- IS 302-1)	-	100	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1, Table -3)	-	500	-
11(Heating, IS 302-1)	-	500	-
19.7(Abnormal Operation, IS 302-1)	-	500	-
19.8(Abnormal Operation, IS 302-1)	-	500	-
19.9(Abnormal Operation, IS 302-1)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	500	-
19.13(Abnormal Operation as per Cl 19, IS 302-1)	-	500	-
19.17(Abnormal Operation, IS 302-1)	-	500	-
22.7(Construction, IS 302-1)	-	500	-
22.9(Construction, IS 302-1)	-	500	-
22.10(Construction, IS 302-1)	-	500	-
22.12(Construction, IS 302-1)	-	500	-
22.14(Construction, IS 302-1)	-	500	-
22.15(Construction, IS 302-1)	-	500	-
22.18(Construction, IS 302-1)	-	500	-
22.19(Construction, IS 302-1)	-	500	-
22.21(Construction, IS 302-1)	-	500	-
22.22(Construction, IS 302-1)	-	500	-
22.24(Construction, IS 302-1)	-	500	-
22.25(Construction, IS 302-1)	-	500	-
22.28(Construction, IS 302-1)	-	500	-
22.31(Construction, IS 302-1)	-	500	-
22.34(Construction, IS 302-1)	-	500	-
22.35(Construction, IS 302-1)	-	500	-
22.36(Construction, IS 302-1)	-	500	-
22.37(Construction, IS 302-1)	-	500	-
22.38(Construction, IS 302-1)	-	500	-
22.40(Construction, IS 302-1)	-	500	-
22.41(Construction, IS 302-1)	-	500	-
22.43(Construction, IS 302-1)	-	500	-
22.43(Construction, IS 302-1)	-	500	-
22.44(Construction, IS 302-1)	-	500	-
22.49(Construction, IS 302-1)	-	500	-
22.54(Construction, IS 302-1)	-	500	-
22.55(Construction, IS 302-1)	-	500	-
22.58(Construction, IS 302-1)	-	500	-
22.59(Construction, IS 302-1)	-	500	-
22.60(Construction, IS 302-1)	-	500	-
22.61(Construction, IS 302-1)	-	500	-
23.2(Internal Wiring, IS 302-1)	-	500	-
23.4(Internal Wiring, IS 302-1)	-	500	-
23.6(Internal Wiring, IS 302-1)	-	500	-
23.7(Internal Wiring, IS 302-1)	-	500	-
23.8(Internal Wiring, IS 302-1)	-	500	-
23.9(Internal Wiring, IS 302-1)	-	500	-
23.10(Internal Wiring, IS 302-1)	-	500	-
25.1(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.2(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.3(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.4(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.5(Supply connection and external flexible cords, IS 302-1)	-	500	-
25.9(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.10(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.20(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.23(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
25.24(Supply Connection and External Flexible Cords, IS 302-1)	-	500	-
27.2(Provision for Earthing, IS 302-1)	-	500	-
27.3(Provision for Earthing, IS 302-1)	-	500	-
27.4(Provision for Earthing, IS 302-1)	-	500	-
27.6(Provision for Earthing, IS 302-1)	-	500	-
32.1(Radiation, toxicity and similar hazards, is 302-1)	-	500	-
32.2(Radiation, toxicity and similar hazards, is 302-1)	-	500	-
11.7(Duration corresponding)	-	500	-
18(Endurance)	-	0	-
27.1(Provision for Earthing, IS 302-1)	-	500	-

31 Dec, 2026

-
Included w.e.f 30.01.2026 Exclusion: Cl.19.11.4.1-Cl.19.11.4.7(EMI/EMC). Cl 24 (Components)

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	500	-
5(General conditions for the tests)	-	500	-
6(Classification)	-	500	-
7(Marking and instructions)	-	500	-
8(Protection against access to live parts)	-	1000	-
10(Power input and current)	-	1000	-
11(Heating)	-	1000	-
13(Leakage current and electric strength at operating temperature)	-	1000	-
14(Transient overvoltages)	-	500	-
15(Moisture resistance)	-	500	-
16(Leakage current and electric strength)	-	1000	-
17(Overload protection of transformers and associated circuits)	-	500	-
19(Abnormal operation)	-	1500	-
20(Stability and mechanical hazards)	-	500	-
21(Mechanical strength)	-	1000	-
22(Construction)	-	1500	-
23(Internal wiring)	-	1000	-
25(Supply connection and external flexible cords)	-	500	-
26(Terminals for external conductors)	-	1000	-
27(Provision for earthing)	-	1000	-
28(Screws and connections)	-	1000	-
29(Clearances, creepage distances and solid insulation)	-	1000	-
30(Resistance to heat and fire)	-	1000	-
31(Resistance to rusting)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	500	-
12(Charging of metal-ion batteries)	-	1000	-
22.101(rated pressure)	-	500	-
22.102(Closed water heaters)	-	500	-
22.103(Addition)	-	500	-
22.104(Addition)	-	500	-
22.105(Cistern-type water heaters)	-	500	-
22.109(Addition)	-	500	-
9(Starting of motor-operated appliances)	-	0	-
18(Endurance)	-	0	-
A.101(Pressure test)	-	500	-

31 Dec, 2026

-
Included w.e.f 06.01.2026 "Cl-19.11.4.1 (Electrostatic discharges) Cl-19.11.4.2 (Radiated fields) Cl-19.11.4.3 (Fast transient bursts) Cl-19.11.4.4 (Surge immunity test) Cl-19.11.4.5 (Immunity to conducted discharges) Cl-19.11.4.6 (Class 3 Voltage dips and interruptions) Cl-19.11.4.7 (Harmonics) Cl-24 (Components)"

IS 302 : Part 2 : Sec 3 (2024)

Household and Similar Electrical Appliances âSafety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4(General requirement)	-	500	-
Cl-7(Marking and instructions)	-	500	-
Cl-8(Protection against access to live parts)	-	2000	-
Cl-10(Power input and current)	-	2000	-
Cl-11(Heating)	-	2000	-
Cl-13(Leakage current and electric strength at operating temperature)	-	2000	-
Cl-14(Transient overvoltages)	-	2000	-
Cl-15(Moisture resistance)	-	2500	-
Cl-16(Leakage current and electric strength)	-	2500	-
Cl-18(Endurance)	-	0	-
Cl-19(Abnormal operation)	-	2000	-
Cl-20(Stability and mechanical hazards)	-	1500	-
Cl-21(Mechanical strength)	-	1500	-
Cl-22(Construction)	-	2000	-
Cl-23(Internal wiring)	-	1000	-
Cl-25(Supply connection and external flexible cords)	-	500	-
Cl-26(Terminals for external conductors)	-	1000	-
Cl-27(Provision for earthing)	-	1000	-
Cl-28(Screws and connections)	-	1000	-
Cl-29(Clearances, creepage distances and solid insulation)	-	1500	-
Cl-30(Resistance to heat and fire)	-	1500	-
Cl-31(Resistance to rusting)	-	1500	-
Cl-32(Radiation, toxicity and similar hazards)	-	1500	-
Cl-12(Charging of metal-ion batteries)	-	2000	-
Cl-17(Overload protection of transformers and associated circuits)	-	2000	-

31 Dec, 2026

-
Included w.e.f 06.01.2026 "Cl-32 (Radiation, toxicity and similar hazards) Cl-19.11.4.1 (Electrostatic discharges) Cl-19.11.4.2 (Radiated fields) Cl-19.11.4.3 (Fast transient bursts) Cl-19.11.4.4 (Surge immunity test) Cl-19.11.4.5 (Immunity to conducted discharges) Cl-19.11.4.6 (Class 3 Voltage dips and interruptions) Cl-19.11.4.7 (Harmonics) Cl-24 (Components)"

IS/IEC 62368 : Part 1 (2023)

Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

125000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl-4.5(Explosion)	-	1000	-
Cl-4.6(Fixing of conductors and conductive parts)	-	1000	-
Cl-5.1(General- Electrically-caused injury)	-	1000	-
Cl-5.2(Classification and limits of electrical energy sources)	-	1000	-
Cl-5.3(Protection against electrical energy sources)	-	1000	-
Cl-5.4(Insulation materials and requirements)	-	1000	-
Cl-5.5(Components as safeguards)	-	1000	-
Cl-5.6(Protective conductor)	-	1000	-
Cl-5.7(Prospective touch voltage, touch current and protective conductor current)	-	1000	-
Cl-5.8(Backfeed safeguard in battery backed up supplies)	-	1000	-
Cl-6.1(General- Electrically-caused fire)	-	1000	-
Cl-6.2(Classification of power sources and potential ignition sources)	-	1000	-
Cl-6.3(Safeguards against fire under normal operating conditions and abnormal operating conditions)	-	1000	-
Cl-6.4(Safeguards against fire under single fault conditions)	-	1000	-
Cl-6.5(Internal and external wiring)	-	1000	-
Cl-7.1(General- Injury caused by hazardous substances)	-	1000	-
Cl-7.2(Reduction of exposure to hazardous substances)	-	1000	-
Cl-7.3(Ozone exposure)	-	1000	-
Cl-7.4(Use of personal safeguards or personal protective equipment (PPE)	-	1000	-
Cl-7.5(Use of instructional safeguards and instructions)	-	1000	-
Cl-8.1(General- Mechanically-caused injury)	-	1000	-
Cl-8.2(Mechanical energy source classifications)	-	1000	-
Cl-8.3(Safeguards against mechanical energy sources)	-	1000	-
Cl-8.4(Safeguards against parts with sharp edges and corners)	-	1000	-
Cl-8.5(Safeguards against moving parts)	-	1000	-
Cl-8.6(Stability of equipment)	-	1000	-
Cl-8.7(Equipment mounted to a wall, ceiling or other structure)	-	1000	-
Cl-8.8(Handle strength)	-	1000	-
Cl-8.9(Wheels or casters attachment requirements)	-	1000	-
Cl-8.10(Carts, stands, and similar carriers)	-	1000	-
Cl-8.11(Mounting means for slide-rail mounted equipment (SRME))	-	1000	-
Cl-9.1(General-Thermal burn injury)	-	1000	-
Cl-9.2(Thermal energy source classifications)	-	1000	-
Cl-9.3(Touch temperature limits)	-	1000	-
Cl-9.4(Safeguards against thermal energy sources)	-	1000	-
Cl-9.5(Requirements for safeguards)	-	1000	-
Cl-9.6(Requirements for wireless power transmitters)	-	1000	-
Cl-10.1(General-Radiation)	-	1000	-
Cl-10.2(Radiation energy source classifications)	-	1000	-
Cl-10.3(Safeguards against laser radiation)	-	1000	-
Annex A(Examples of equipment within the scope of this document)	-	1000	-
Annex B(General- Normal operating condition tests, abnormal operating condition tests and single fault condition tests)	-	1000	-
Annex B-4(Simulated single fault conditions)	-	1000	-
Annex B-2(Normal operating conditions)	-	1000	-
Annex B-3(Simulated abnormal operating conditions)	-	1000	-
Annex D-1(Impulse test generators)	-	1000	-
Annex D-2(Antenna interface test generator)	-	1000	-
Annex E-1(Electrical energy source classification for audio signals)	-	1000	-
Annex E-2(Audio signals used during test)	-	1000	-
Annex E-3(Operating conditions of equipment containing an audio amplifier)	-	1000	-
Annex F-1(General-Equipment markings, instructions, and instructional safeguards)	-	1000	-
Annex F-2(Letter symbols and graphical symbols)	-	1000	-
Annex F-3(Equipment markings)	-	1000	-
Annex F-4(Instructions)	-	1000	-
Annex F-5(Instructional safeguards)	-	1000	-
Annex G-1(Switches)	-	1000	-
Annex G-2(Relays)	-	1000	-
Annex G-3(Protective devices)	-	1000	-
Annex G-4(Connectors)	-	1000	-
Annex G-5(Wound components)	-	1000	-
Annex G-6(Wire insulation)	-	1000	-
Annex G-7(Mains power supply cords and interconnection cables)	-	1000	-
Annex G-8(Varistors)	-	1000	-
Annex G-9(Integrated circuit (IC) current limiters)	-	1000	-
Annex G-10(Resistors)	-	1000	-
Annex G-11(Capacitors and RC units)	-	1000	-
Annex G-12(Optocouplers)	-	1000	-
Annex G-13(Printed boards)	-	1000	-
Annex G-14(Coatings on component terminals)	-	1000	-
Annex G-15(Pressurized liquid filled components or LFC assemblies)	-	1000	-
Annex G-16(IC that includes a capacitor discharge function (ICX))	-	1000	-
Cl-4.1(General- materials, components)	-	1000	-
Cl-4.2(Energy source classifications)	-	1000	-
Cl-4.3(Protection against energy sources)	-	1000	-
Cl-4.4(Safeguards)	-	1000	-
Cl-4.7(Equipment for direct insertion into mains socket-outlets)	-	1000	-
Cl-4.8(Equipment containing coin or button cell batteries)	-	1000	-
Cl-4.9(Likelihood of fire or shock due to entry of conductive objects)	-	1000	-
Cl-4.10(Components requirements)	-	1000	-
Annex H-1(General- Criteria for telephone ringing signals)	-	1000	-
Annex H-2(Method A)	-	1000	-
Annex H-3(Method B)	-	1000	-
Annex I(Overvoltage categories (see IEC 60364-4-44))	-	1000	-
Annex J-1(General-Insulated winding wires for use without interleaved insulation)	-	1000	-
Annex J-2(Type tests)	-	1000	-
Annex J-3(Testing during manufacturing)	-	1000	-
Annex K-1(General- Safety interlocks)	-	1000	-
Annex K-2(Components of the safety interlock safeguard mechanism)	-	1000	-
Annex K-3(Inadvertent change of operating mode)	-	1000	-
Annex K-4(Interlock safeguard override)	-	1000	-
Annex K-5(Fail-safe)	-	1000	-
Annex K-6(Mechanically operated safety interlocks)	-	1000	-
Annex K-7(Interlock circuit isolation)	-	1000	-
Annex L-1(General requirements)	-	1000	-
Annex L-2(Permanently connected equipment)	-	1000	-
Annex L-3()	-	1000	-
Annex L-4(Single-phase equipment)	-	1000	-
Annex L-5(Three-phase equipment)	-	1000	-
Annex L-6(Switches as disconnect devices)	-	1000	-
Annex L-7(Plugs as disconnect devices)	-	1000	-
Annex L-8(Multiple power sources)	-	1000	-
Annex L-9(Compliance criteria)	-	1000	-
Annex M-1(General requirements)	-	1000	-
Annex M-2(Safety of batteries and their cells)	-	1000	-
Annex M-3(Protection circuits for batteries provided within the equipment)	-	1000	-
Annex M-4(Additional safeguards for equipment containing a secondary lithium battery)	-	1000	-
Annex M-5(Risk of burn due to short-circuit during carrying)	-	1000	-
Annex M-6(Safeguards against short-circuits)	-	1000	-
Annex M-7(Risk of explosion from lead acid and NiCd batteries)	-	1000	-
Annex M-8("Protection against internal ignition from external spark sources of rechargeable batteries with aqueous electrolyte")	-	1000	-
Annex M-9(Preventing electrolyte spillage)	-	1000	-
Annex M-10(Instructions to prevent reasonably foreseeable misuse)	-	1000	-
Annex N(Electrochemical potentials (V))	-	1000	-
Annex O(Measurement of creepage distances and clearances)	-	1000	-
Annex P-1(General-Safeguards against conductive objects)	-	1000	-
Annex P-2(Safeguards against entry or consequences of entry of a foreign object)	-	1000	-
Annex P-3(Safeguards against spillage of internal liquids)	-	1000	-
Annex P-4(Metallized coatings and adhesives securing parts)	-	1000	-
Annex Q-1(Limited power source)	-	1000	-
Annex Q-2(Test for external circuits – paired conductor cable)	-	1000	-
Annex R(Limited short-circuit test)	-	1000	-
Annex S-1(Flammability test for fire enclosure and fire barrier materials of equipment where the steady state power does not exceed 4 000 W)	-	1000	-
Annex S-2(Flammability test for fire enclosure and fire barrier integrity)	-	1000	-
Annex S-3(Flammability tests for the bottom of a fire enclosure)	-	1000	-
Annex S-4(Flammability classification of materials)	-	1000	-
Annex S-5(Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W)	-	1000	-
Annex S-6(Grille covering material, cloth, and reticulated foam)	-	1000	-
Annex T-1(General-Mechanical strength tests)	-	1000	-
Annex T-2(Steady force test, 10 N)	-	1000	-
Annex T-3(Steady force test, 30 N)	-	1000	-
Annex T-4(Steady force test, 100 N)	-	1000	-
Annex T-5(Steady force test, 250 N)	-	1000	-
Annex T-6(Enclosure impact test)	-	1000	-
Annex T-7(Drop test)	-	1000	-
Annex T-8(Stress relief test)	-	1000	-
Annex T-9(Glass impact test)	-	1000	-
Annex T-10(Glass fragmentation test)	-	1000	-
Annex T-11(Test for telescoping or rod antennas)	-	1000	-
Annex U("Mechanical strength of CRTs and protection against the effects of implosion")	-	1000	-
Annex V-1(Accessible parts of equipment)	-	1000	-
Annex V-2(Accessible part criterion)	-	1000	-
Annex W(Comparison of terms introduced in this document)	-	1000	-
Annex X("Alternative method for determining clearances for insulation in circuits connected to an AC mains not exceeding 420 V peak (300 V RMS)")	-	1000	-
Annex Y-1(General- Construction requirements for outdoor enclosures)	-	1000	-
Annex Y-2(Resistance to UV radiation)	-	1000	-
Annex Y-3(Resistance to corrosion)	-	1000	-
Annex Y-4(Gaskets)	-	1000	-
Annex Y-5(Protection of equipment within an outdoor enclosure)	-	1000	-
Annex Y-6(Mechanical strength of enclosures)	-	1000	-

31 Dec, 2026

-
Included w.e.f 27.01.2026 "Cl-10.4 (""Safeguards against optical radiation from lamps and lamp systems (including LED types)"") Cl-10.5 (Safeguards against X-radiation) Cl-10.6 (Safeguards against acoustic energy sources) Annex C-1 (Protection of materials in equipment from UV radiation) Annex C-2 (UV light conditioning test) Annex D-3 (Electronic pulse generator)"

IS 16893 : Part 3 (2018)

Secondary Lithium - lon Cells For the Propulsion of Electric Road Vehicles Part 3 Safety Requirements

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(General Charge Conditions)	-	10000	10% discount to BIS
5.2(Capacity)	-	10000	10% discount to BIS
5.3(SOC Adjustment)	-	5000	10% discount to BIS
6.2.1(Vibration)	-	50000	10% discount to BIS
6.2.2(Mechanical Shock)	-	30000	10% discount to BIS
6.2.3(Crush)	-	25000	10% discount to BIS
6.3.1(High Temperature Endurance)	-	25000	10% discount to BIS
6.3.2(Temperature Cycling)	-	50000	10% discount to BIS
6.4.1(External Short Circuit)	-	25000	10% discount to BIS
6.4.2(Overcharge)	-	25000	10% discount to BIS
6.4.3(Forced Discharge)	-	50000	10% discount to BIS
6.4.3(Forced Discharge)	-	25000	10% discount to BIS
5.1(General Charge Conditions)	-	10000	10% discount to BIS
5.2(Capacity)	-	10000	10% discount to BIS
5.3(SOC Adjustment)	-	5000	10% discount to BIS
6.2.1(Vibration)	-	50000	10% discount to BIS
6.2.2(Mechanical Shock)	-	30000	10% discount to BIS
6.2.3(Crush)	-	25000	10% discount to BIS
6.3.1(High Temperature Endurance)	-	25000	10% discount to BIS
6.3.2(Temperature Cycling)	-	50000	10% discount to BIS
6.4.1(External Short Circuit)	-	25000	10% discount to BIS
6.4.2(Overcharge)	-	25000	10% discount to BIS
6.4.3(Forced Discharge)	-	50000	10% discount to BIS
6.4.3(Forced Discharge)	-	50000	10% discount to BIS
6.4.4(Internal short circuit test)	-	25000	10% discount to BIS

31 Dec, 2026

-
Included w.e.f. 29-09-2023.

IS 16047 : Part 3 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Secondary Lithium Cells and Batteries for Portable Applications Part 3 Prismatic and Cylindrical Lithium Secondary Cells, and Batteries Made From Them ( First Revision )

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Cell Designation and Marking)	-	5000	10% discount to BIS
7.1, 7.2(Charging Procedure for Test Purpose)	-	50000	10% discount to BIS
7.3.1(Discharge Performance at 20°C (Rated Capacity))	-	25000	10% discount to BIS
7.3.2("Discharge Performance at -20°C ")	-	25000	10% discount to BIS
7.3.3(High Rate Discharge Performance at 20°C)	-	25000	10% discount to BIS
7.4(Charge (capacity) Retention and Recovery)	-	30000	10% discount to BIS
7.5(Charge (Capacity) Recovery After Long Term Storage)	-	30000	10% discount to BIS
7.6.2(Endurance In Cycles at a Rate of 0.2It A)	-	50000	10% discount to BIS
7.6.3("Endurance in Cycles at a Rate of 0.5It A (Accelerated Test Procedure) ")	-	50000	10% discount to BIS
7.7(Battery Internal Resistance)	-	20000	10% discount to BIS
5(Cell Designation and Marking)	-	5000	10% discount to BIS
7.1, 7.2(Charging Procedure for Test Purpose)	-	50000	10% discount to BIS
7.3.1(Discharge Performance at 20°C (Rated Capacity))	-	25000	10% discount to BIS
7.3.2("Discharge Performance at -20°C ")	-	25000	10% discount to BIS
7.3.3(High Rate Discharge Performance at 20°C)	-	25000	10% discount to BIS
7.4(Charge (capacity) Retention and Recovery)	-	30000	10% discount to BIS
7.5(Charge (Capacity) Recovery After Long Term Storage)	-	30000	10% discount to BIS
7.6.2(Endurance In Cycles at a Rate of 0.2It A)	-	50000	10% discount to BIS
7.6.3("Endurance in Cycles at a Rate of 0.5It A (Accelerated Test Procedure) ")	-	50000	10% discount to BIS
7.7(Battery Internal Resistance)	-	50000	10% discount to BIS
5(Cell Designation and Marking)	-	-	-
7.1, 7.2(Charging Procedure for Test Purpose)	-	-	-
7.3.1(Discharge Performance at 20°C (Rated Capacity))	-	-	-
7.3.2("Discharge Performance at -20°C ")	-	-	-
7.3.3(High Rate Discharge Performance at 20°C)	-	-	-
7.4(Charge (capacity) Retention and Recovery)	-	-	-
7.5(Charge (Capacity) Recovery After Long Term Storage)	-	-	-
7.6.2(Endurance In Cycles at a Rate of 0.2It A)	-	-	-
7.6.3("Endurance in Cycles at a Rate of 0.5It A (Accelerated Test Procedure) ")	-	-	-
7.7(Battery Internal Resistance)	-	-	-

31 Dec, 2026

-
Included w.e.f. 29-09-2023. Exclusion: Cl.7.8 (Electrostatic Discharge)

IS 16805 (2018)

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes ” Safety Requirements for Secondary Lithium Cells and Batteries, for Use in Industrial Applications

300000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(General Safety Considerations)	-	5000	10% discount to BIS
7.1(Charging Procedures For Test Purposes)	-	50000	10% discount to BIS
7.2.1(External Short-Circuit Test)	-	30000	10% discount to BIS
7.2.2(Impact Test)	-	20000	10% discount to BIS
7.2.3(Drop Test)	-	20000	10% discount to BIS
7.2.4(Thermal Abuse Test)	-	30000	10% discount to BIS
7.2.5(Overcharge Test)	-	30000	10% discount to BIS
7.2.6(Forced Discharge Test)	-	30000	10% discount to BIS
8(Battery System Safety)	-	5000	10% discount to BIS
9(Information For Safety)	-	5000	10% discount to BIS
10(Marking and Designation)	-	5000	10% discount to BIS
5(General Safety Considerations)	-	5000	10% discount to BIS
7.1(Charging Procedures For Test Purposes)	-	50000	10% discount to BIS
7.2.1(External Short-Circuit Test)	-	30000	10% discount to BIS
7.2.2(Impact Test)	-	20000	10% discount to BIS
7.2.3(Drop Test)	-	20000	10% discount to BIS
7.2.4(Thermal Abuse Test)	-	30000	10% discount to BIS
7.2.5(Overcharge Test)	-	30000	10% discount to BIS
7.2.6(Forced Discharge Test)	-	30000	10% discount to BIS
8(Battery System Safety)	-	5000	10% discount to BIS
9(Information For Safety)	-	5000	10% discount to BIS
10(Marking and Designation)	-	5000	10% discount to BIS
5(General Safety Considerations)	-	5000	10% discount to BIS
7.1(Charging Procedures For Test Purposes)	-	50000	10% discount to BIS
7.2.1(External Short-Circuit Test)	-	30000	10% discount to BIS
7.2.2(Impact Test)	-	20000	10% discount to BIS
7.2.3(Drop Test)	-	25000	10% discount to BIS
7.2.4(Thermal Abuse Test)	-	30000	10% discount to BIS
7.2.5(Overcharge Test)	-	30000	10% discount to BIS
7.2.6(Forced Discharge Test)	-	30000	10% discount to BIS
8(Battery System Safety)	-	5000	10% discount to BIS
9(Information For Safety)	-	5000	10% discount to BIS
10(Marking and Designation)	-	5000	10% discount to BIS
7.3.3(Propagation Test)	-	50000	10% discount to BIS
5(General Safety Considerations)	-	5000	10% discount to BIS
7.1(Charging Procedures For Test Purposes)	-	50000	10% discount to BIS
7.2.1(External Short-Circuit Test)	-	30000	10% discount to BIS
7.2.2(Impact Test)	-	20000	10% discount to BIS
7.2.3(Drop Test)	-	20000	10% discount to BIS
7.2.4(Thermal Abuse Test)	-	30000	10% discount to BIS
7.2.5(Overcharge Test)	-	30000	10% discount to BIS
7.2.6(Forced Discharge Test)	-	30000	10% discount to BIS
8(Battery System Safety)	-	5000	10% discount to BIS
9(Information For Safety)	-	5000	10% discount to BIS
10(Marking and Designation)	-	5000	10% discount to BIS
7.3.3(Propagation Test)	-	50000	10% discount to BIS
7.3.2(Internal short-circuit test)	-	20000	10% discount to BIS

31 Dec, 2026

-
Included w.e.f. 29-09-2023.

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	500	10% discount to BIS
7(Marking and instructions)	-	500	10% discount to BIS
8(Protection against live parts)	-	500	10% discount to BIS
10(POWER INPUT AND CURRENT)	-	3000	10% discount to BIS
11(HEATING)	-	3000	10% discount to BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	2000	10% discount to BIS
14(TRANSIENT OVERVOLTAGES)	-	1000	10% discount to BIS
15(MOISTURE RESISTANCE)	-	2000	10% discount to BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	2000	10% discount to BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	10% discount to BIS
19(ABNORMAL OPERATION)	-	1000	10% discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	500	10% discount to BIS
21(MECHANICAL STRENGTH)	-	500	10% discount to BIS
22(CONSTRUCTION)	-	500	10% discount to BIS
23(INTERNAL WIRING)	-	500	10% discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	500	10% discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	500	10% discount to BIS
27(PROVISION FOR EARTHING)	-	2000	10% discount to BIS
28(SCREWS AND CONNECTIONS)	-	500	10% discount to BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	10% discount to BIS
30(RESISTANCE TO HEAT AND FIRE)	-	1000	10% discount to BIS
31(RESISTANCE TO RUSTING)	-	500	10% discount to BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	10% discount to BIS
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	0	-
18(ENDURANCE)	-	0	-
22.32(Oxygen bomb for rubber material)	-	500	10% DISCOUNT TO BIS
22.47(Water pressure inlet)	-	500	10% DISCOUNT TO BIS
22.106(Interlocks)	-	500	10% DISCOUNT TO BIS

31 Dec, 2026

-
Included w.e.f. 04-01-2023. Excluding: Cl.19.11.4.1 to 19.11.4.4 EMI/EMC test, Cl.22.16 (Cord reel test setup), Cl.22.46 (software ), Cl.24 (COMPONENTS) (10% discount for BIS)

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

8000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.1(Marking- IS 302-1)	-	500	10% DISCOUNT TO BIS
7.1(Marking- IS 302-1)	-	500	10% discount to BIS
7.3(Marking- IS 302-1)	-	500	10% discount to BIS
7.4(Marking- IS 302-1)	-	500	10% discount to BIS
7.6(Marking- IS 302-1)	-	500	10% discount to BIS
7.7(Marking- IS 302-1)	-	500	10% discount to BIS
7.11(Marking- IS 302-1)	-	500	10% discount to BIS
7.12(Marking- IS 302-1)	-	500	10% discount to BIS
7.13(Marking- IS 302-1)	-	500	10% discount to BIS
7.14(Marking- IS 302-1)	-	500	10% discount to BIS
7.15(Marking- IS 302-1)	-	500	10% discount to BIS
7.101(Marking)	-	500	10% discount to BIS
8( Protection Against Electric Shock, IS 302-1)	-	500	10% discount to BIS
10(Power Input and Current, IS 302-1)	-	500	10% discount to BIS
11(Heating, IS 302-1)	-	500	10% discount to BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	10% discount to BIS
14(Transient Over Voltages, IS 302-1)	-	500	10% discount to BIS
15.1(Moisture Resistance, IS 302-1)	-	500	10% discount to BIS
15.2(Moisture Resistance, IS 302-1)	-	500	10% discount to BIS
15.3(Moisture Resistance, IS 302-1)	-	500	10% discount to BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	10% discount to BIS
19.4(Abnormal Operation, IS 302-1)	-	500	10% discount to BIS
19.5(Abnormal Operation, IS 302-1)	-	500	10% discount to BIS
19.7(Abnormal Operation)	-	500	10% discount to BIS
19.1(Abnormal Operation)	-	500	10% discount to BIS
19.9(Abnormal Operation)	-	500	10% discount to BIS
19.101(Abnormal Operation)	-	500	10% discount to BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	500	10% discount to BIS
20.2(Stability & Mechanical Hazards, IS 302-1)	-	500	10% discount to BIS
21.1(Mechanical Strength, IS 302-1)	-	500	10% discount to BIS
21.2(Mechanical Strength, IS 302-1)	-	500	10% discount to BIS
21.101(Mechanical Strength, IS 302-2-3)	-	500	10% discount to BIS
22(Construction, IS 302-1)	-	500	10% discount to BIS
22.101(Construction)	-	500	10% discount to BIS
22.102(Construction)	-	500	10% discount to BIS
22.103(Construction)	-	500	10% discount to BIS
22.105(Construction)	-	500	10% discount to BIS
22.106(Construction)	-	500	10% discount to BIS
22.107(Construction)	-	500	10% discount to BIS
23.1(Internal Wiring, IS 302-1)	-	500	10% discount to BIS
23.2(Internal Wiring, IS 302-1)	-	500	10% discount to BIS
23.3(Internal Wiring, IS 302-1)	-	500	10% discount to BIS
23.4(Internal Wiring, IS 302-1)	-	500	10% discount to BIS
23.5(Internal Wiring, IS 302-1)	-	500	10% discount to BIS
23.6(Internal Wiring, IS 302-1)	-	500	10% discount to BIS
23.7(Internal Wiring, IS 302-1)	-	500	10% discount to BIS
23.8(Internal Wiring, IS 302-1)	-	500	10% discount to BIS
23.9(Internal Wiring, IS 302-1)	-	500	10% discount to BIS
23.10(Internal Wiring, IS 302-1)	-	500	10% discount to BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	500	10% discount to BIS
26(Terminals for External Conductors, IS 302-1)	-	500	10% discount to BIS
27.1(Provision for Earthing, IS 302-1)	-	500	10% discount to BIS
27.2(Provision for Earthing, IS 302-1)	-	500	10% discount to BIS
27.3(Provision for Earthing, IS 302-1)	-	500	10% discount to BIS
27.4(Provision for Earthing, IS 302-1)	-	500	10% discount to BIS
27.5(Provision for Earthing, IS 302-1)	-	500	10% discount to BIS
28(Screws & Connections, IS 302-1)	-	500	10% discount to BIS
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	10% discount to BIS
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	10% discount to BIS
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	500	10% discount to BIS
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	500	10% discount to BIS
31(Resistance of Rusting, IS 302-1)	-	500	10% discount to BIS
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	500	10% discount to BIS
7.8(Marking- IS 302-1)	-	500	10% DISCOUNT TO BIS
6(Classification- IS 302-1 )	-	0	10% DISCOUNT TO BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	10% DISCOUNT TO BIS
22.104(Construction)	-	500	10% DISCOUNT TO BIS
4(General requirement)	-	0	-
17(Overload protection of transformers and associated circuits)	-	0	-
18(Endurance)	-	0	-

31 Dec, 2026

-
Included w.e.f. 04-01-2023. Excluding: Cl.19.11.4.1 (Electrostatic discharges), Cl.19.11.4.2 (Radiated fields), Cl.19.11.4.3 (Fast transient bursts), Cl.19.11.4.4 (Surge immunity test), Cl.24.1 (Components), Cl.22.1 (Construction) (10% discount for BIS)

IS 302 : Part 2 : Sec 21 (2018)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and Instructions)	-	500	10% discount to BIS
8.0(Protection against access to live parts)	-	500	10% discount to BIS
10.0(Input and Current)	-	1000	10% discount to BIS
11.0(Heating)	-	1000	10% discount to BIS
13.0(Leakage Current and electric strength at operating temperature)	-	1000	10% discount to BIS
14.0(Transient Overvoltage)	-	500	10% discount to BIS
15.0(Moisture resistance)	-	1000	10% discount to BIS
16.0(Leakage current and Electric strength (After Humidity (Environmental) Treatment))	-	1000	10% discount to BIS
17.0(Overload Protection of transformer and associated circuit)	-	500	10% discount to BIS
19.0(Abnormal Operation)	-	1000	10% discount to BIS
20.0(Stability and mechanical hazards)	-	500	10% discount to BIS
21.0(Mechanical Strength)	-	500	10% discount to BIS
22.0(Construction)	-	500	10% discount to BIS
23.0(Internal Wiring)	-	500	10% discount to BIS
25.0(Supply Connection and External Flexible Cords)	-	500	10% discount to BIS
26.0(Terminals for external conductors)	-	500	10% discount to BIS
27.0(Provision For Earthing)	-	1000	10% discount to BIS
28.0(Screws and Connections)	-	500	10% discount to BIS
29.0(Creepage Distances and Clearances)	-	1000	10% discount to BIS
30.0(Resistance To Heat and Fire)	-	1000	10% discount to BIS
31.0(Resistance To Rusting)	-	500	10% discount to BIS
6.0(Classification)	-	0	10% DISCOUNT TO BIS

31 Dec, 2026

-
Included w.e.f. 04-01-2023. Excluding: Cl.19.11.4.1 (Electrostatic discharges), Cl.19.11.4.2 (Radiated fields), Cl.19.11.4.3 (Fast transient bursts), Cl.19.11.4.4 (Surge immunity test), Cl.22.16 (cord reel test setup), Cl.22.46 (software) (10% discount for BIS)

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	500	10% discount to BIS
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	500	10% discount to BIS
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	1000	10% discount to BIS
Cl.11 of IS 302-2201: 2008(Heating)	-	1000	10% discount to BIS
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	1000	10% discount to BIS
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	500	10% discount to BIS
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	1000	10% discount to BIS
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	1000	10% discount to BIS
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	500	10% discount to BIS
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	1000	10% discount to BIS
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	500	10% discount to BIS
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	500	10% discount to BIS
Cl.22 of IS 302-2-201: 2008(Construction)	-	500	10% discount to BIS
Cl.23 of 302-2-201:2008(Internal Wiring )	-	500	10% discount to BIS
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	500	10% discount to BIS
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	500	10% discount to BIS
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	1000	10% discount to BIS
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	500	10% discount to BIS
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	1000	10% discount to BIS
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	1000	10% discount to BIS
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	500	10% discount to BIS
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	500	10% discount to BIS
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	0	-

31 Dec, 2026

-
Included w.e.f. 04-01-2023. Excluding: Cl.19.11.4.1 (Electrostatic discharges), Cl.19.11.4.2 (Radiated fields), Cl.19.11.4.3 (Fast transient bursts), Cl.19.11.4.4 (Surge immunity test), Cl.22.16 (cord reel test setup), Cl.22.46 (software), Cl.24 (Component) (10% discount for BIS)

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	1000	10% DISCOUNT TO BIS
8.1.1(Protection against live parts in all positions)	-	500	10% DISCOUNT TO BIS
8.1.2(Protection against live parts in openings)	-	500	10% DISCOUNT TO BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	10% DISCOUNT TO BIS
8.1.4(Protection against live parts against protective impedance)	-	500	10% DISCOUNT TO BIS
10.1(Power input)	-	3000	10% DISCOUNT TO BIS
10.2(Current input)	-	3000	10% DISCOUNT TO BIS
11.1(General)	-	500	10% DISCOUNT TO BIS
11.2(General)	-	2000	10% DISCOUNT TO BIS
11.3(Heating)	-	3000	10% DISCOUNT TO BIS
13.1(General)	-	1000	10% DISCOUNT TO BIS
13.2(Leakage current at operating temperature)	-	1000	10% DISCOUNT TO BIS
13.3(Electric Strength at operating temperature)	-	1000	10% DISCOUNT TO BIS
14(Transient Over Voltages)	-	1000	10% DISCOUNT TO BIS
15.0(General)	-	500	10% DISCOUNT TO BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	1000	10% DISCOUNT TO BIS
15.2(Spillage Test)	-	500	10% DISCOUNT TO BIS
15.3(Humidity Test)	-	500	10% DISCOUNT TO BIS
16.0(General)	-	1000	10% DISCOUNT TO BIS
16.1(General)	-	1000	10% DISCOUNT TO BIS
16.2(Leakage Current (after Clause 15))	-	500	10% DISCOUNT TO BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	500	10% DISCOUNT TO BIS
17(Over Load Protection of Transformers and associated circuits)	-	2000	10% DISCOUNT TO BIS
19(Abnormal Operation)	-	8000	10% DISCOUNT TO BIS
20(Stability test)	-	2000	10% DISCOUNT TO BIS
21(Mechanical Strength Test)	-	2000	10% DISCOUNT TO BIS
22(Construction verification related test)	-	2000	10% DISCOUNT TO BIS
23(General)	-	3000	10% DISCOUNT TO BIS
25(Supply connection and external flexible cords)	-	3000	10% DISCOUNT TO BIS
26(Terminals for external conductors)	-	3000	10% DISCOUNT TO BIS
27(Provision for earthing)	-	2000	10% DISCOUNT TO BIS
28(Screw test and connections)	-	2000	10% DISCOUNT TO BIS
29(clearance, creepage distances and solid insulation)	-	2000	10% DISCOUNT TO BIS
31(Resistance to Rusting)	-	2000	10% DISCOUNT TO BIS
32(Radiation Toxicity and Similar Hazards)	-	2000	10% DISCOUNT TO BIS
30.1(Ball pressure test)	-	1000	10% DISCOUNT TO BIS
30.2(Glow Wire Test)	-	1000	10% DISCOUNT TO BIS
30.2(Needle Flame Test)	-	1000	10% DISCOUNT TO BIS
8.1.5(Live parts of built-in appliances)	-	500	10% DISCOUNT TO BIS
9(Starting of motor operation test requirements and tests)	-	0	-
18(Endurance Test requirements and tests)	-	0	-
11.4(Heating appliances)	-	500	10% DISCOUNT TO BIS
11.5(Motor-operated appliances)	-	500	10% DISCOUNT TO BIS
11.6(Combined appliances)	-	500	10% DISCOUNT TO BIS
11.7(Duration corresponding)	-	500	10% DISCOUNT TO BIS
11.8(Temperature rise)	-	500	10% DISCOUNT TO BIS

31 Dec, 2026

-
Included w.e.f. 04-01-2023. Excluding: Cl.19.11.4.1 (Electrostatic discharges), Cl.19.11.4.2 (Radiated fields), Cl.19.11.4.3 (Fast transient bursts), , Cl.19.11.4.4 (Surge immunity test), Cl. 22.46 (Software), Cl.24 (Components) (10% discount for BIS) "(1)Cooking ranges, hobs, ovens and similar appliances, (2)Commercial Dispensing Appliances and Vending Machines, (3) spin extractors (For testing charges please refer relevant Part 2 standard in LIMS)"

IS 302 : Part 2 : Sec 35 (2017)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision)

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 7 IS 302-2-35(Marking and Instruction)	-	500	10% discount to BIS
Cl. 8 IS 302-2-35(Protection against access to live parts)	-	500	10% discount to BIS
Cl. 10 IS 302-2-35(Power Input and Current )	-	1000	10% discount to BIS
Cl. 11 IS 302-2-35(Heating)	-	1000	10% discount to BIS
Cl. 13 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature)	-	1000	10% discount to BIS
Cl. 14 IS 302-2-35(Radio and television interference suppression / Transient over voltages)	-	500	10% discount to BIS
Cl. 15 IS 302-2-35(Moisture Resistance Test )	-	1000	10% discount to BIS
Cl. 16 IS 302-2-35(Leakage Current & Electric Strength at Operating Temperature (After Humidity Treatment))	-	1000	10% discount to BIS
Cl. 17 IS 302-2-35(Overload Protection of Transformers and Associated Circuit)	-	500	10% discount to BIS
Cl. 19 IS 302-2-35(Abnormal Operation )	-	1000	10% discount to BIS
Cl. 20 IS 302-2-35(Stability & Mechanical Hazards)	-	500	10% discount to BIS
Cl. 21 IS 302-2-35(Mechanical strength)	-	500	10% discount to BIS
Cl. 22 IS 302-2-35(Construction )	-	500	10% discount to BIS
Cl. 23 IS 302-2-35(Internal Wiring)	-	500	10% discount to BIS
Cl. 25 IS 302-2-35(Supply Connection & External Flexible Cords)	-	500	10% discount to BIS
Cl. 26 IS 302-2-35(Terminals for External conductors )	-	500	10% discount to BIS
Cl. 27 IS 302-2-35(Provision for Earthing )	-	1000	10% discount to BIS
Cl. 28 IS 302-2-35(Screws & Connections)	-	500	10% discount to BIS
Cl. 29 IS 302-2-35(Clearances, Creepage Distances & Solid insulation )	-	1000	10% discount to BIS
Cl. 30 IS 302-2-35(Resistance to Heat Fire & Tracking )	-	1000	10% discount to BIS
Cl. 31 IS 302-2-35(Resistance to Rusting)	-	500	10% discount to BIS
Cl. 32 IS 302-2-35(Radiation, Toxicity and similar hazards)	-	500	10% discount to BIS
Cl. 6 IS 302-2-35(Classification)	-	0	-
Cl. 24 IS 302-2-35(Components)	-	500	10% DISCOUNT TO BIS
Cl. 18 IS 302-2-35(Endurance)	-	0	-
Cl. 9 IS 302-2-35(Starting of motor operated appliances)	-	0	-

31 Dec, 2026

-
Included w.e.f. 04-01-2023. Excluding: Cl.19.11.4.1 (Electrostatic discharges), Cl.19.11.4.2 (Radiated fields), Cl.19.11.4.3 (Fast transient bursts), Cl.19.11.4.4 (Surge immunity test), Cl.22.16 (cord reel test setup), Cl.22.46 (Software), Cl. 24 (Components) (10% discount for BIS)

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

30000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.0(Marking and instructions)	-	500	10% discount to BIS
8.0(Protection against access to live part test)	-	1000	10% discount to BIS
10.0(Power Input and current test)	-	2000	10% discount to BIS
11.0(Heating test)	-	2000	10% discount to BIS
13.0(Leakage current and electric strength test)	-	2000	10% discount to BIS
14.0(Transient voltages)	-	1000	10% discount to BIS
15.0(Moisture Resistance)	-	5000	10% discount to BIS
16.0(Leakage current and electric strength test)	-	2000	10% discount to BIS
17.0(Overload protection of transformers test)	-	500	10% discount to BIS
19.0(Abnormal Operations)	-	5000	10% discount to BIS
20.0(Stability and Mechanical Hazards)	-	500	10% DISCOUNT TO BIS
21.0(Mechanical Strength)	-	500	10% DISCOUNT TO BIS
22.0(Construction verification related tests)	-	500	10% DISCOUNT TO BIS
23.0(Internal wiring)	-	500	10% DISCOUNT TO BIS
25.0(Supply connections and External Flexible Cords)	-	500	10% DISCOUNT TO BIS
26.0(Terminal for External Conductors)	-	500	10% DISCOUNT TO BIS
27.0(Provision for Earthing)	-	1000	10% DISCOUNT TO BIS
28.0(Screws and connections)	-	500	10% DISCOUNT TO BIS
29.0(Clearances and Creepage distances and solid insulation)	-	500	10% DISCOUNT TO BIS
30.0(Resistance to heat and fire)	-	1000	10% DISCOUNT TO BIS
31.0(Resistance to rusting)	-	500	10% DISCOUNT TO BIS
32.0(Radiation, Toxicity and Similar hazards)	-	500	10% DISCOUNT TO BIS
6.0(Classification)	-	0	-
9.0(Starting of motor-operated appliances test)	-	0	-
18.0(Endurance test)	-	0	-

31 Dec, 2026

-
Included w.e.f. 04-01-2023. Excluding: CL.19.11.4.1 (Electrostatic discharges), Cl.19.11.4.2 (Radiated fields), Cl.19.11.4.3 (Fast transient bursts), Cl.19.11.4.4 (Surge immunity test), Cl.22.16 (cord reel test setup), Cl.22.46 (software), Cl.24.0 (Components) (10% discount for BIS)

IS 16822 (2019)

Secondary cells and batteries containing alkaline or other non - Acid electrolytes - Secondary lithium cells and batteries for use in industrial applications

450000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and Designation)	-	10000	10% discount to BIS
6, 6.1, 6.2(Charging Procedures For Test Purposes)	-	50000	10% discount to BIS
6.3, 6.3.1(Discharge Performance, Discharge Performance at +25°C)	-	20000	10% discount to BIS
6.3.2(Discharge performance at Low Temperature)	-	20000	10% discount to BIS
6.3.3(High Rate Permissible Current)	-	20000	10% discount to BIS
6.4(Charge (Capacity) Retention and Recovery)	-	20000	10% discount to BIS
6.5(Cell and Battery Internal Resistance)	-	20000	10% discount to BIS
6.6(Endurance)	-	200000	10% discount to BIS
5(Marking and Designation)	-	10000	10% discount to BIS
6, 6.1, 6.2(Charging Procedures For Test Purposes)	-	50000	10% discount to BIS
6.3, 6.3.1(Discharge Performance, Discharge Performance at +25°C)	-	20000	10% discount to BIS
6.3.2(Discharge performance at Low Temperature)	-	20000	10% discount to BIS
6.3.3(High Rate Permissible Current)	-	20000	10% discount to BIS
6.4(Charge (Capacity) Retention and Recovery)	-	20000	10% discount to BIS
6.5(Cell and Battery Internal Resistance)	-	20000	10% discount to BIS
6.6(Endurance)	-	200000	10% discount to BIS

31 Dec, 2026

-
Included w.e.f. 29-09-2023.

IS 16333 : Part 3 (2022)

Mobile phone handsets: Part 3 Indian language support for mobile phone handsets - Specific requirements(Second Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1(Inputting of text)	-	10000	10% discount to BIS
5.2(Message Readability)	-	10000	10% discount to BIS
6(Marking)	-	5000	10% discount to BIS
5.1(Inputting of text)	-	10000	10% discount to BIS
5.2(Message Readability)	-	10000	10% discount to BIS
6(Marking)	-	5000	10% discount to BIS

31 Dec, 2026

-
Included w.e.f. 16-12-2022.

IS 10322 : Part 5 : Sec 9 (2017)

Luminaires: Part 5 particular requirements: Sec 9 rope lights

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
21.6(Marking)	-	2000	10% discount to BIS
21.7(Construction)	-	5000	10% discount to BIS
21.8(Creepage Distance and Clearances)	-	5000	10% discount to BIS
21.9(Provision for earthing)	-	5000	10% discount to BIS
21.10(Terminals)	-	2000	10% discount to BIS
21.11(External & Internal Wiring)	-	5000	10% discount to BIS
21.12(Protection against electric shock)	-	5000	10% discount to BIS
21.13(Endurance Tests and Thermal Tests)	-	15000	10% discount to BIS
21.14(Resistance to Dust & Moisture)	-	10000	10% discount to BIS
21.15(Insulation Resistance and Electric Strength)	-	10000	10% discount to BIS
21.16(Resistance to Heat , fire and tracking)	-	5000	10% discount to BIS

31 Dec, 2026

-
Included w.e.f. 16.11.2022. Electromechanical Contact System (Cl.4.11.6), Photo Biological hazards (Cl.4.24), as per (RD) IS 10322(P1):2014

IS 10322 : Part 5 : Sec 7 (2017)

Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
20.6(Marking)	-	2000	10% discount to BIS
20.7(Construction)	-	5000	10% discount to BIS
20.8(Creepage Distance and Clearances)	-	5000	10% discount to BIS
20.9(Provision for earthing)	-	5000	10% discount to BIS
20.10(Terminals)	-	2000	10% discount to BIS
20.11(External & Internal Wiring)	-	5000	10% discount to BIS
20.12(Protection against electric shock)	-	5000	10% discount to BIS
20.13(Endurance Tests and Thermal Tests)	-	15000	10% discount to BIS
20.14(Resistance to Dust & Moisture)	-	10000	10% discount to BIS
20.15(Insulation Resistance and Electric Strength)	-	10000	10% discount to BIS
20.16(Resistance to Heat , fire and tracking)	-	5000	10% discount to BIS

31 Dec, 2026

-
Included w.e.f. 16.11.2022. Electromechanical Contact System (Cl.4.11.6), Photo Biological hazards (Cl.4.24), as per (RD) IS 10322(P1):2014

IS 10322 : Part 5 : Sec 6 (2013)

Luminaires: Part 5 particular requirements: Sec 6 handlamps

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Marking)	-	2000	10% discount to BIS
8.0(Creepage Distance and Clearances)	-	5000	10% discount to BIS
9.0(Provision for earthing)	-	5000	10% discount to BIS
10.0(Terminals)	-	2000	10% discount to BIS
11.0(External & Internal Wiring)	-	5000	10% discount to BIS
12.0(Protection against electric shock)	-	5000	10% discount to BIS
13.0(Endurance Tests and Thermal Tests)	-	15000	10% discount to BIS
14.0(Resistance to Dust & Moisture)	-	10000	10% discount to BIS
15.0(Insulation Resistance and Electric Strength)	-	10000	10% discount to BIS
16.0(Resistance to Heat , fire and tracking)	-	5000	10% discount to BIS
7.0(Construction)	-	5000	10% discount to BIS

31 Dec, 2026

-
Included w.e.f. 16.11.2022. Electromechanical Contact System (Cl.4.11.6), UV Radiation (Cl. 4.24, Annex-P), as per (RD) IS 10322(P-1):2014

IS 16103 : Part 1 (2012)

Led modules for general lighting: Part 1 safety requirements

50000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	5000	10% discount to BIS
8(Terminals)	-	5000	10% discount to BIS
9(PROVISION FOR EARTHING)	-	5000	10% discount to BIS
10(Protection against accidental contact with live parts)	-	5000	10% discount to BIS
11(Mositure Resistance and Insulation)	-	5000	10% discount to BIS
12(Electric Strength)	-	5000	10% discount to BIS
13(Fault conditions)	-	10000	10% discount to BIS
16(Creepage distance and clearances)	-	5000	10% discount to BIS
17(Screws, current carrying parts and connections)	-	5000	10% discount to BIS
18(Resistance to heat, fire and tracking)	-	2000	10% discount to BIS
19(Resistance to corrosion)	-	1000	10% discount to BIS

31 Dec, 2026

-
Included w.e.f. 16.11.2022

IS 16333 : Part 3 (2017)

Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements (First Revision)

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
5.1(Inputting of text)	-	10000		10% discount to BIS
5.2(Message Readability)	-	15000		10% discount to BIS

31 Dec, 2026

-
-

IS 13252 : Part 1 (2010)

Information technology equipment - Safety: Part 1 general requirements (Second Revision)

125000 View breakup
Rs. 1,00,000/- (for Laptop/ notebook/tablet, Visual display unit, video monitors of screen size up to 75", Printer & Plotters, Scanner, Power adaptor for IT equipments, Mobile phones and Mail processing machine/ postage machine/ Franking machine, Point of sale terminal, Copying machine/ duplicators, Passport Readers and Power bank for use in portable applications, Set Top Box, Telephone answering machine, Cash Registers and Smart card readers, Wireless Keyboard). Rs. 75,000/- (For CCTV Recorders & CCTV Cameras). Rs. 1,25,000/- for (Automatic data processing machine. Additional Products). Rs.75,000/- (For USB driven Barcode readers, Barcode scanner, Iris scanners, Optical fingerprint scanners and Smart watches). Rs. 75000/- for Keyboard. Rs. 1,25,000/- for Automatic teller cash dispensing machines. Rs. 75000/- for USB type external hard disk drive. Rs. 75000/- for USB type external solid state storage devices (above 256GB capacity). Rs. 75000/-(for standalone switch mode power supplies (SMPS) with output voltage 48V (mx)). Rs. 1,25,000/- (for Digital Camera)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
1.6(Power interface .)	-	5000	10% discount to BIS
1.7(Markings and instructions)	-	3000	10% discount to BIS
2.1(Protection from electric shock and energy hazards)	-	3000	10% discount to BIS
2.2(SELV circuits)	-	5000	10% discount to BIS
2.3(TNV circuits)	-	5000	10% discount to BIS
2.4(Limited current circuits)	-	5000	10% discount to BIS
2.5(Limited power sources .)	-	5000	10% discount to BIS
2.6(Provisions for earthing and bonding)	-	5000	10% discount to BIS
2.7(Overcurrent and earth fault protection in primary circuits)	-	3000	10% discount to BIS
2.8(Safety interlocks)	-	3000	10% discount to BIS
2.9(Electrical insulation)	-	15000	10% discount to BIS
2.10(Clearances, creepage distances and distances through insulation)	-	5000	10% discount to BIS
3.1(General)	-	3000	10% discount to BIS
3.2(Connection to a mains supply)	-	3000	10% discount to BIS
3.3(Wiring terminals for connection of external conductors)	-	3000	10% discount to BIS
3.5(Interconnection of equipment)	-	3000	10% discount to BIS
4.1(Stability)	-	3000	10% discount to BIS
4.2(Mechanical strength)	-	5000	10% discount to BIS
4.3(Design and construction)	-	3000	10% discount to BIS
4.4(Protection against hazardous moving parts)	-	10000	10% discount to BIS
4.5(Thermal requirements)	-	5000	10% discount to BIS
4.6(Openings in enclosures)	-	3000	10% discount to BIS
4.7(Resistance to fire)	-	5000	10% discount to BIS
5.1(Touch current and protective conductor curren)	-	5000	10% discount to BIS
5.2(Electric strength)	-	5000	10% discount to BIS
5.3(Abnormal operating and fault conditions)	-	5000	10% discount to BIS
6.1(Protection of telecommunication network service persons, and users of other equipment connected to the network, from hazards in the equipment)	-	3000	10% discount to BIS
6.2(Protection of equipment users from overvoltages on networks telecommunication)	-	15000	10% discount to BIS
6.3(Protection of the telecommunication wiring system from overheating)	-	3000	10% discount to BIS
7.3(Protection of equipment users from overvoltages on the cable distribution system)	-	3000	10% discount to BIS
7.4(Insulation between primary circuits and cable distribution systems)	-	15000	10% discount to BIS
1.5(Components)	-	15000	10% discount to BIS
3.4(Disconnection from the mains supply)	-	0	-
7.2(Protection of cable distribution system service persons, and users of other equipment connected to the system, from hazardous voltages in the equipment)	-	0	-

31 Dec, 2026

-
Following Additional products included w.e.f. 18.09.2018: USB driven Barcode readers, Barcode scanner, Iris scanners, Optical fingerprint scanners and Smart watches. Excluding: Component (Cl.1.5), Safety Interlocks: Safety Interlocks: Moving parts (Cl.2.8.5), Switches & Relays(Cl.2.8.7), Contact gaps (Cl.2.8.7.1), Endurance test (Cl.2.8.7.3), Semiconductor Devices (Opto-coupler test) (Cl.2.10.5.4), Insulation in wound components (Cl.2.10.5.11), Cathode Ray Tube (Cl.4.2.8), Flammable Liquids (Cl.4.3.12), Ionizing Radiation (Cl.4.3.13.2), Effect of UV Radiation on materials (Cl.4.3.13.3), Human exposure to UV radiation (Cl.4.3.13.4), Lasers including LED (Cl.4.3.13.5), Bottom of the fire enclosure/ Hot flaming oil test (Cl.4.6.2 & Annex-A3), Insulating winding wires (Annex U), Evaluation of IC current limiters (Annex CC).

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	3000	10% discount to BIS
8(Protection against live parts)	-	3000	10% discount to BIS
10(POWER INPUT AND CURRENT)	-	10000	10% discount to BIS
11(HEATING)	-	6000	10% discount to BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3000	10% discount to BIS
14(TRANSIENT OVERVOLTAGES)	-	3000	10% discount to BIS
15(MOISTURE RESISTANCE)	-	10000	10% discount to BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	5000	10% discount to BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	3000	10% discount to BIS
19(ABNORMAL OPERATION)	-	5000	10% discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	3000	10% discount to BIS
21(MECHANICAL STRENGTH)	-	3000	10% discount to BIS
22(CONSTRUCTION)	-	3000	10% discount to BIS
23(INTERNAL WIRING)	-	3000	10% discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	3000	10% discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	3000	10% discount to BIS
27(PROVISION FOR EARTHING)	-	5000	10% discount to BIS
28(SCREWS AND CONNECTIONS)	-	3000	10% discount to BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	5000	10% discount to BIS
30(RESISTANCE TO HEAT AND FIRE)	-	5000	10% discount to BIS
31(RESISTANCE TO RUSTING)	-	3000	10% discount to BIS
6.0(Classification)	-	0	-
24(COMPONENTS)	-	15000	10% discount to BIS

31 Dec, 2026

-
Excluding: EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Cord Reel Test Set-up (Cl.22.16), Software (Cl.22.46), Water Pressure Inlet (Cl.22.47) and Components (Cl.24).

IS 16046 (2015)

Secondary Cells and Batteries Containing Alkaline or Other Non-acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made from them, for Use in Portable Applications ( First Revision )

- View breakup
Rs.1,80,000/- [10% discount to BIS]

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Dec, 2026

-
Transport test (Cl.8.3.8) based on manufacturer’s documents to demonstrate compliance.

IS 616 (2017)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

100000 View breakup
Rs. 75,000/- (For Electronic games (Video), Electronic musical system with input power 200W and above, Power adopters for audio, video & similar electronic apparatus). Rs.1,00,000/- (For Plasma/LCD/LED TV of screen size up to 75". Additional Products). Rs.75,000/- (For Amplifiers with input power 2000W and above, Optical Disc Players with built in amplifiers of input power 200W and above). Rs.1,00,000/- (For Plasma/LCD/LED TV of screen size up to 32"). Rs.75000/- (for Wireless Headphone & Earphone) Rs.75000/- (for Electronic Musical System with input power below 200W) Rs.10000/- (for Television other than plasma/LCD/LED/TVS. Additonal Products Included For Phase V). Rs.75000/- (for Microphone. Video camera, Webcam (finished product), Smart Speakers (with and without display), Bluetooth speakers).

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking and instructions)	-	5000	10% discount to BIS
7(Heating under normal operating conditions)	-	10000	10% discount to BIS
8(Constructional requirements with regard to the protection against electric shock)	-	15000	10% discount to BIS
9(Electric shock hazard under normal operating conditions)	-	10000	10% discount to BIS
10(Insulation requirements)	-	10000	10% discount to BIS
11(Fault conditions)	-	10000	10% discount to BIS
12(Mechanical strength)	-	15000	10% discount to BIS
13(CLEARANCES and CREEPAGE DISTANCES)	-	10000	10% discount to BIS
15(TERMINALS)	-	10000	10% discount to BIS
16(External flexible cords)	-	5000	10% discount to BIS
17(Electrical connections and mechanical fixings)	-	10000	10% discount to BIS
19(Stability and mechanical hazards)	-	10000	10% discount to BIS
20(Resistance to fire)	-	10000	10% discount to BIS
14(Components)	-	15000	10% discount to BIS

31 Dec, 2026

-
REVISED VERSION IS 616:2017 and Additional Products included w.e.f. 18.09.2018. Excluding: Ionizing radiation test (Cl.6.1), Laser radiation (Cl.6.2), Endurance test for wound components with insulated winding wires without additional interleaved insulation (Cl.8.17), Printed Boards (Cl.13.5), Component test (Cl.14), Plugs & Sockets (Cl.15.1), Mechanical strength of picture tubes & protection against the effect of implosion (Cl.18).

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

150000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	5000	10% discount to BIS
8(Protection against live parts)	-	5000	10% discount to BIS
10(POWER INPUT AND CURRENT)	-	10000	10% discount to BIS
11(HEATING)	-	10000	10% discount to BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	5000	10% discount to BIS
15(HUMIDITY TREATMENT TEST)	-	5000	10% discount to BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	5000	10% discount to BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	5000	10% discount to BIS
18(ENDURANCE)	-	35000	10% discount to BIS
19(ABNORMAL OPERATION)	-	10000	10% discount to BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	5000	10% discount to BIS
21(MECHANICAL STRENGTH)	-	5000	10% discount to BIS
22(CONSTRUCTION)	-	5000	10% discount to BIS
23(INTERNAL WIRING)	-	5000	10% discount to BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	5000	10% discount to BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	5000	10% discount to BIS
27(PROVISION FOR EARTHING)	-	5000	10% discount to BIS
28(SCREWS AND CONNECTIONS)	-	5000	10% discount to BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	5000	10% discount to BIS
30(RESISTANCE TO HEAT AND FIRE)	-	5000	10% discount to BIS
31(RESISTANCE TO RUSTING)	-	10000	10% discount to BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	10000	10% discount to BIS
6.0(Classification)	-	0	-
24(COMPONENTS)	-	15000	10% discount to BIS
14(IMPULSE VOLTAGE TEST)	-	25000	10% discount to BIS

31 Dec, 2026

-
Excluding: EMI/EMC (Cl.19.11.4.1 to 19.11.4.7), Cord Reel Test Set-up (Cl.22.16), Software (Cl.22.46), Water Pressure Inlet (Cl.22.47), Interlocks (Cl.22.106), Component (Cl.24), Appliance for board ships (Annex-BB) & Salt spray test (Annex-CC).

IS 15885 : Part 2 : Sec 13 (2012)

Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules

75000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking)	-	5000	10% discount to BIS
8(Protection against accidental contact with live parts)	-	5000	10% discount to BIS
9(Terminals)	-	5000	10% discount to BIS
10(PROVISION FOR EARTHING)	-	5000	10% discount to BIS
11(MOISTURE RESISTANCE)	-	5000	10% discount to BIS
12(Electric Strength)	-	5000	10% discount to BIS
14(Fault conditions)	-	10000	10% discount to BIS
15(Transformer heating)	-	15000	10% discount to BIS
16(Construction)	-	5000	10% discount to BIS
17(Creepage distance and clearances)	-	5000	10% discount to BIS
18(Screws, current carrying parts and connections)	-	5000	10% discount to BIS
19(Resistance to heat, fire and tracking)	-	10000	10% discount to BIS
20(Resistance to corrosion)	-	10000	10% discount to BIS

31 Dec, 2026

-
Excluding: Components: Enclosure, Bridging resistor in primary circuit, Capacitor and RC units, RF suppression (X-Y capacitors), Inductor, MOV/VDR, SMPS/Mains Transformer, PCB material, Metal base PCB for LED, Transparent cover, Bobbin, Insulated tape, Heat shrinkage sleeve, Connector, Fuse, Internal wire, LED, Opto-coupler, EMI/EMC filter, Winding wire, Thin sheet materials etc.

IS 16102 : Part 1 (2012)

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

80000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(Marking)	-	5000	10% Discount to BIS
6(Interchangeability)	-	10000	10% Discount to BIS
7(Protection against accidental contact with live parts)	-	5000	10% Discount to BIS
8(Insulation Resistance and Electric Strength)	-	15000	10% Discount to BIS
9(MECHANICAL STRENGTH)	-	10000	10% Discount to BIS
10(cap temperature)	-	10000	10% Discount to BIS
11(Resistance to Heat)	-	10000	10% Discount to BIS
12(Resistance to Flame and Ignition)	-	10000	10% Discount to BIS
13(Fault conditions)	-	10000	10% Discount to BIS
14(Creepage distance and clearances)	-	5000	10% Discount to BIS

31 Dec, 2026

-
Restricted to Cap type B22d, E14 & E27 only.

Bureau of Indian Standards

The National Standards Body of India

Matrix Test Labs

PLOT NO 28 BADLI INDUSTRIAL AREA, delhi, New Delhi, Delhi, 110042

9560422022 matrixtestlab@gmail.com

Scope List

No Record Found