BIS - LIMS (Laboratory Information Management System)

Institute of Wood Science and Technology (IWST), Field Station, Kolkata

2/2 Biren Roy Road West, Kolkata, Kolkata, West Bengal, 700061

9874219758 samplecellfsk@icfre.org

Scope List

Reset

15 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Testing Charges (Excl. Of Taxes)

Validity Date

Remark

IS 1328 (1996)

Veneered Decorative Plywood -Specification

4400 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	150	Total testing charges for Dimensions & Tolerances is रु.720/-
8(Dimensions & Tolerances - Width - Cl. 8)	-	150	Total testing charges for Dimensions & Tolerances is रु.720/-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	150	Total testing charges for Dimensions & Tolerances is रु.720/-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	150	Total testing charges for Dimensions & Tolerances is रु.720/-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	150	Total testing charges for Dimensions & Tolerances is रु.720/-
9(Finish - Cl. 9.1, 8.3)	-	700	-
11(Tests - Moisture Content - Part 1 of IS 1734)	-	1008	-
11(Tests - Water Resistance Test - Cl. 11.1.2.1 [for MR Grade])	-	2292	-
11(Tests - Water Resistance Test - Cl. 11.1.2.2 [for BWR Grade])	-	2292	-
7.1.1(Requirements - Open splits, checks or open joints - For Type 1 - Cl. 7.1.1)	-	200	-
7.2.1(Requirements - Open splits, checks or open joints - For Type 2 - Cl. 7.2.1)	-	200	-
7.1.2(Requirements - Other defects - For Type 1 - Cl. 7.1.2)	-	200	-
7.2.2(Requirements - Other defects - For Type 2 - Cl. 7.2.2.)	-	200	-
7.1.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 1 - Cl. 7.1.3)	-	200	-
7.2.3(Requirements - Other Charcteristics and Manufacturing Defects - For Type 2 - Cl. 7.2.3)	-	200	-

31 Oct, 2025

-
-

IS 1003 : Part 1 (2003)

Timber Panelled and Glazed Shutters : Part 1 Door shutters -

18080 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Effective Date	Remark
No Record Found

31 Oct, 2025

-
-

IS 2202 : Part 1 (1999)

Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision)

BWP / BN

20840 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(Height - IS 4020 (Pt-2))	-	90	Total Testing Charges for Dimensions, Squareness, General flatness and Local planeness is रु.630/-
11.1(Width- IS 4020 (Pt-2))	-	90	Total Testing Charges for Dimensions, Squareness, General flatness and Local planeness is रु.630/-
11.1(Thickness - IS 4020 (Pt-2))	-	90	Total Testing Charges for Dimensions, Squareness, General flatness and Local planeness is रु.630/-
11.1(Variation in thickness - IS 4020 (Pt-2))	-	90	Total Testing Charges for Dimensions, Squareness, General flatness and Local planeness is रु.630/-
11.1( Squareness Test - IS 4020 (Pt-2))	-	90	Total Testing Charges for Dimensions, Squareness, General flatness and Local planeness is रु.630/-
11.2( Twist, cupping & wrapping - IS 4020 (Pt-3))	-	90	Total Testing Charges for Dimensions, Squareness, General flatness and Local planeness is रु.630/-
11.3(Depth of deviation - IS 4020(Pt-4))	-	90	Total Testing Charges for Dimensions, Squareness, General flatness and Local planeness is रु.630/-
11.4(Impact Indentation Test - IS 4020(Pt-5))	-	1090	Total Testing Charges for Impact Indentation is रु.2170/-
11.4(Depth of indentation - IS 4020(Pt-5))	-	1090	Total Testing Charges for Impact Indentation is रु.2170/-
11.5(Deflection at maximum load - IS 4020(Pt-6))	-	1090	Total Testing Charges for Flexure is रु.2170/-
11.5(Residual deflection - IS 4020(Pt-6))	-	1090	Total Testing Charges for Flexure is रु.2170/-
11.6(Deflection of the edge at maximum load - IS 4020(Pt-7))	-	550	Total Testing Charges for Edge Loading is रु.2170/-
11.6(Residual deflection after removal of load - IS 4020(Pt-7))	-	550	Total Testing Charges for Edge Loading is रु.2170/-
11.6(Lateral buckling during loading - IS 4020(Pt-7))	-	550	Total Testing Charges for Edge Loading is रु.2170/-
11.6(Residual lateral buckling - IS 4020(Pt-7))	-	550	Total Testing Charges for Edge Loading is रु.2170/-
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	1750	Total Testing Charges for Shock Resistance is रु.3500/-
11.7(Shock Resistance Test -IS 4020(Pt-8))	-	1750	Total Testing Charges for Shock Resistance is रु.3500/-
11.8(Buckling Test - IS 4020(Pt-9))	-	730	Total Testing Charges for Buckling is रु.2170/-
11.8(Initial deflection - IS 4020(Pt-9))	-	730	Total Testing Charges for Buckling is रु.2170/-
11.8(Residual deformation after 15 minutes of unloading - IS 4020(Pt-9))	-	730	Total Testing Charges for Buckling is रु.2170/-
11.9(Slamming Test - IS 4020(Pt-10))	-	1480	NA
11.1(Misuse Test - IS 4020(Pt-11))	-	2500	NA
11.11(Varying Humidity Test - IS 4020(Pt-12))	-	2040	Total Testing Charges for Varying Humidity is रु.6100/-
11.11(Maximum departure from the general planeness - IS 4020(Pt-12))	-	2040	Total Testing Charges for Varying Humidity is रु.6100/-
11.11(The recovery of the original size after subjecting the door to high and low humidity- IS 4020(Pt-12))	-	2040	Total Testing Charges for Varying Humidity is रु.6100/-
11.12(End Immersion Test - IS 4020(Pt-13))	-	1300	NA
11.13(Knife Test - IS 4020(Pt-14))	-	840	NA
11.14(Glue Adhesion Test - IS 4020(Pt-15))	-	1000	NA
11.15(Screw Withdrawal Strength - IS 4020 (Pt-16))	-	880	Total Testing Charges for Screw Withdrawal Strength is रु.1750/-
11.15(Screw Withdrawal Resistance test - IS 4020 (Pt-16))	-	880	Total Testing Charges for Screw Withdrawal Strength is रु.1750/-
6.2(Plywood)	-	200	Total Testing Charges for Workmanship & finish is रु.600/-
9.2(Workmanship & finish - IS 2202(Pt-1))	-	200	Total Testing Charges for Workmanship & finish is रु.600/-
9.3(Workmanship & finish - IS 2202(Pt-1))	-	200	Total Testing Charges for Workmanship & finish is रु.600/-

31 Oct, 2025

-
-

IS 1659 (2004)

Block boards - Specification (Fourth Revision)

BWP / MR

9200 View breakup
Total Testing Charges For MR Grade= Rs. 8,800/- Total Testing Charges For BWP Grade = Rs. 6,640/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.3(Dimensional Requirements - Length - 8.1.4)	-	110	Total Testing Charges for Dimensions and Tolerance is रु.630/-
7.3(Dimensional Requirements - Width - 8.1.4)	-	110	Total Testing Charges for Dimensions and Tolerance is रु.630/-
7.3(Dimensional Requirements - Thickness - Annexure E)	-	110	Total Testing Charges for Dimensions and Tolerance is रु.630/-
7.3(Dimensional Requirements - Variation in thickness - Annexure E)	-	110	Total Testing Charges for Dimensions and Tolerance is रु.630/-
7.3(Dimensional Requirements - Squareness - Annexure D)	-	110	Total Testing Charges for Dimensions and Tolerance is रु.630/-
7.3(Dimensional Requirements - Edge Straightness - Annexure D)	-	110	Total Testing Charges for Dimensions and Tolerance is रु.630/-
8.1.3, 6.3.3, IS 303(Visual Inspection - Permissible Defects - IS 303 [test method for COMMERCIAL type])	-	650	NA
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 90% RH - Annexure F)	-	110	Total Testing Charges for Dimensions and Tolerance is रु.650/-
9.2.1(Dimensional Changes caused by humidity - Change in Length - at 40% RH - Annexure F)	-	110	Total Testing Charges for Dimensions and Tolerance is रु.650/-
9.2.1(Dimensional Changes caused by humidity - Change in Thickness - at 90% RH - Annexure F)	-	110	Total Testing Charges for Dimensions and Tolerance is रु.650/-
9.2.1(Dimensional Changes caused by humidity - Change in thickness - at 40% RH - Annexure F)	-	110	Total Testing Charges for Dimensions and Tolerance is रु.650/-
9.2.1(Dimensional Changes caused by humidity Change in local planeness - Annexure F)	-	110	Total Testing Charges for Dimensions and Tolerance is रु.650/-
9.2.1(Dimensional Changes caused by humidity - Delamination - Annexure F)	-	110	Total Testing Charges for Dimensions and Tolerance is रु.650/-
9.2.3(Adhesion of Plies - Annexure H)	-	830	NA
9.2.2 (Resistance to water - Annexure G, Annexure H [For BWP grade])	-	2300	NA
9.2.2 (Resistance to water - Annexure G, Annexure H [For MR Grade])	-	2300	NA
9.2.5(Modulus of elasticity - AVERAGE - Annexure K)	-	1150	Total Testing Charges for Modulus of Elasticity is रु.2300/-
9.2.5(Modulus of elasticity - MINIMUM INDIVIDUAL - Annexure K)	-	1150	Total Testing Charges for Modulus of Elasticity is रु.2300/-
9.2.5(Modulus of rupture - AVERAGE - Annexure K)	-	1150	Total Testing Charges for Modulus of Rupture is रु.2300/-
9.2.5(Modulus of rupture - MINIMUM INDIVIDUAL - Annexure K)	-	1150	Total Testing Charges for Modulus of Rupture is रु.2300/-
9.2.6(Spot test - Annexure L)	-	830	NA
9.2.4(Mycological Test [for MR grade only] - Annexure J)	-	2300	NA

31 Oct, 2025

-
-

IS 5509 (2000)

Fire retardant plywood - Specification (Second Revision)

BWR

13600 View breakup
Total Testing Charges Rs. 13,600/- Only for Cl.12.3.1, 12.3.2 & 12.3.3 = Rs. 7200/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(a) Length)	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
8(b) Width)	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
8(c) Thickness 1) less than 6mm ±10% 2) 6 mm and above ±5% )	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
8.3 & Annex A (d) Edge Straightness 0.2% Max.)	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
8.3 & Annex A (e) Edge Squareness 0.2% Max.)	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
9(Workmanship and finish)	-	600	NA
12.2(Moisture content )	-	840	NA
12.3.1(Flammability )	-	2400	NA
12.3.2(Flame Penetration )	-	2500	NA
12.2.3(Rate of burning )	-	2600	NA
12.4(Glue adhesion (water resistance ))	-	1000	NA
12.4(Modulus of Elasticity, (Along the grain direction of the face veneer))	-	580	Total Testing Charges for Modulus of Elasticity is रु.2300/-
12.4(Modulus of Elasticity, (Across the grain direction of the face veneer))	-	580	Total Testing Charges for Modulus of Elasticity is रु.2300/-
12.4(Modulus of Elasticity, (Across the grain direction of the face veneer))	-	580	Total Testing Charges for Modulus of Elasticity is रु.2300/-
12.4(Modulus of Rupture, (Along the grain direction of the face veneer))	-	580	Total Testing Charges for Modulus of Rupture is रु.2300/-
12.4(Modulus of Rupture, (Along the grain direction of the face veneer))	-	580	Total Testing Charges for Modulus of Rupture is रु.2300/-
12.4(Modulus of Rupture, (Across the grain direction of the face veneer))	-	580	Total Testing Charges for Modulus of Rupture is रु.2300/-
12.4(Modulus of Rupture, (Across the grain direction of the face veneer))	-	580	Total Testing Charges for Modulus of Rupture is रु.2300/-

31 Oct, 2025

-
-

IS 12406 (2003)

Medium density fibre boards for general purpose - Specification (First Revision)

Grade I/II SBG I / II

13750 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 4( Types)	-	600	NA
Cl 7(Finish)	-	600	NA
Cl 8(Dimensions & Tolerances)	-	630	NA
Cl 11.4(Test For Density)	-	840	NA
Cl 11.5(Test For Moisture Content)	-	840	NA
Cl 11.6(Test For water Absorption)	-	2300	NA
Cl 11.7.1(Due To General Absorption)	-	1050	NA
Cl 11.7.2(Due To Surfacel Absorption)	-	1030	NA
Cl 11.8(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	4600	Total Testing Charges for Modulus of Elasticity is रु.2300/- & Modulus of Rupture is रु.2300/-
Cl 11.9(Test For Internal Bond)	-	2300	NA

31 Oct, 2025

-
-

IS 15380 (2003)

Moulded Raised High Density Fibre (HDF) Panel Doors -

Type- Heavy Duty / Light Duty

19170 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
11.1(Dimension and squareness test)	-	630	NA
11.2(General flatness test)	-	630	NA
11.3(low Planeness Teat)	-	630	NA
11.4(Impact Indentation Test)	-	2170	NA
11.5(Flexure Test)	-	2170	NA
11.6(edge loading test)	-	2170	NA
11.7(shock resistance test)	-	3500	NA
11.8(Buckling Test)	-	2170	NA
11.9(slamming Test)	-	1480	NA
11.1(misuse test)	-	2500	NA
11.11(varying humidity test)	-	6100	NA
11.13(glue adhesion test)	-	1000	NA
11.12(end immersion test)	-	1300	NA
11.14(screw withdrawal resistance test)	-	1750	NA

31 Oct, 2025

-
-

IS 3087 (2005)

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

Grade I / II / FPT1 / FPT2 / XPS / FPS / XPT

16830 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8.3(Dimensional Tolerances)	-	600	NA
7(Finish)	-	600	NA
1 (i) Table 1(Density Variation (Flat Pressed Single Layer))	-	840	NA
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 1))	-	840	NA
1 (i) Table 1(Density Variation (Flat Pressed Three Layer grade 2))	-	840	NA
1 (i) Table 1(Density Variation (Extrusion Pressed Solids) XPS)	-	840	NA
9.2, 11.4(Moisture content)	-	830	NA
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Single Layer))	-	1150	Total Testing Charges for Water Absorption is रु.2300/-
1 (ii) Table 1 (b)(Water absorption, 24h soacking (Flat Pressed Single Layer))	-	1150	Total Testing Charges for Water Absorption is रु.2300/-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 1))	-	1150	Total Testing Charges for Water Absorption is रु.2300/-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 1))	-	1150	Total Testing Charges for Water Absorption is रु.2300/-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Flat Pressed Three Layer grade 2))	-	1150	Total Testing Charges for Water Absorption is रु.2300/-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Flat Pressed Three Layer grade 2))	-	1150	Total Testing Charges for Water Absorption is रु.2300/-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Solids) XPS)	-	1150	Total Testing Charges for Water Absorption is रु.2300/-
1 (ii) (b) Table 1 (Water absorption, 24h soacking (Extrusion Pressed Solids) XPS)	-	1150	Total Testing Charges for Water Absorption is रु.2300/-
1 (ii) (a) Table 1(Water absorption, 2h soacking (Extrusion Pressed Tubular) XPS)	-	1150	Total Testing Charges for Water Absorption is रु.2300/-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Single Layer))	-	780	Total Testing Charges for Swelling due to general absorption is रु.2300/-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 1))	-	780	Total Testing Charges for Swelling due to general absorption is रु.2300/-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Flat Pressed Three Layer grade 2))	-	780	Total Testing Charges for Swelling due to general absorption is रु.2300/-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Solids) XPS)	-	780	Total Testing Charges for Swelling due to general absorption is रु.2300/-
1 (iii) (a) Table 1(Linear expression (swelling in water), Length (Extrusion Pressed Tubular) XPS)	-	780	Total Testing Charges for Swelling due to general absorption is रु.2300/-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Single Layer))	-	780	Total Testing Charges for Swelling due to general absorption is रु.2300/-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 1))	-	780	Total Testing Charges for Swelling due to general absorption is रु.2300/-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Flat Pressed Three Layer grade 2))	-	780	Total Testing Charges for Swelling due to general absorption is रु.2300/-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Solids) XPS)	-	780	Total Testing Charges for Swelling due to general absorption is रु.2300/-
1 (iii) (b) Table 1(Linear expression (swelling in water), Width (Extrusion Pressed Tubular) XPS)	-	780	Total Testing Charges for Swelling due to general absorption is रु.2300/-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Single Layer))	-	780	Total Testing Charges for Swelling due to general absorption is रु.2300/-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 1))	-	780	Total Testing Charges for Swelling due to general absorption is रु.2300/-
1 (iv) Table 1(Thickness swelling, Width (Flat Pressed Three Layer grade 2))	-	780	Total Testing Charges for Swelling due to general absorption is रु.2300/-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Extrusion Pressed Solids) XPS)	-	780	Total Testing Charges for Swelling due to general absorption is रु.2300/-
1 (iv) Table 1(Thickness swelling, Width (Extrusion Pressed Tubular) XPS)	-	780	Total Testing Charges for Swelling due to general absorption is रु.2300/-
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Single Layer))	-	2300	NA
1 (v) Table 1(Swelling in thickness due to surface absorption, (Flat Pressed Three Layer grade 2))	-	2300	NA
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Single Layer))	-	1150	Total Testing Charges for Modulus of rupture is रु.2300/-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 1))	-	1150	Total Testing Charges for Modulus of rupture is रु.2300/-
1 (vi) (a), Table 1(Modulus of rupture, Average (Flat Pressed Three Layer grade 2))	-	1150	Total Testing Charges for Modulus of rupture is रु.2300/-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Solids) XPS)	-	1150	Total Testing Charges for Modulus of rupture is रु.2300/-
1 (vi) (a), Table 1(Modulus of rupture, Average (Extrusion Pressed Tubular) XPS)	-	1150	Total Testing Charges for Modulus of rupture is रु.2300/-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Single Layer))	-	1150	Total Testing Charges for Modulus of rupture is रु.2300/-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 1))	-	1150	Total Testing Charges for Modulus of elasticity is रु.2300/-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Flat Pressed Three Layer grade 2))	-	1150	Total Testing Charges for Modulus of rupture is रु.2300/-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Solids) XPS)	-	1150	Total Testing Charges for Modulus of rupture is रु.2300/-
1 (vi) (b), Table 1(Modulus of rupture, Minimum (Extrusion Pressed Tubular) XPT)	-	1150	Total Testing Charges for Modulus of rupture is रु.2300/-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Single Layer))	-	1150	Total Testing Charges for Modulus of elasticity is रु.2300/-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 1))	-	1150	Total Testing Charges for Modulus of elasticity is रु.2300/-
1 (vii) (a), Table 1(Modulus of elasticity, Average (Flat Pressed Three Layer grade 2))	-	1150	Total Testing Charges for Modulus of elasticity is रु.2300/-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Single Layer))	-	1150	Total Testing Charges for Modulus of elasticity is रु.2300/-
1 (vii) (b), Table 1(Modulus of elasticity, Minimum (Flat Pressed Three Layer grade 2))	-	1150	Total Testing Charges for Modulus of elasticity is रु.2300/-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Single Layer))	-	880	Total Testing Charges for Tensile strength perpendicular to the surface is रु.1750/-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface,Upto 20mm thickness (Flat Pressed Three Layer grade 1))	-	880	Total Testing Charges for Tensile strength perpendicular to the surface is रु.1750/-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Flat Pressed Three Layer grade 2))	-	880	Total Testing Charges for Tensile strength perpendicular to the surface is रु.1750/-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Solids) XPS)	-	880	Total Testing Charges for Tensile strength perpendicular to the surface is रु.1750/-
1 (viii) (a), Table 1(Tensile strenath perpendicullr to surface, Upto 20mm thickness (Extrusion Pressed Tubular) XPT)	-	880	Total Testing Charges for Tensile strength perpendicular to the surface is रु.1750/-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Single Layer))	-	880	Total Testing Charges for Tensile strength perpendicular to the surface is रु.1750/-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface,Above 20mm thickness (Flat Pressed Three Layer grade 1))	-	880	Total Testing Charges for Tensile strength perpendicular to the surface is रु.1750/-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Flat Pressed Three Layer grade 2))	-	880	Total Testing Charges for Tensile strength perpendicular to the surface is रु.1750/-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Solids) XPS)	-	880	Total Testing Charges for Tensile strength perpendicular to the surface is रु.1750/-
1 (viii) (b), Table 1(Tensile strenath perpendicullr to surface, Above 20mm thickness (Extrusion Pressed Tubular) XPT)	-	880	Total Testing Charges for Tensile strength perpendicular to the surface is रु.1750/-
11.10(screw withdrawal strength)	-	1750	NA

31 Oct, 2025

-
-

IS 848 (2006)

Synthetic resin adhesives for plywood (Phenolic And Aminoplastic) - Specification (Second Revision)

MR / BWP / BWR

5840 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4 Table (i)(BWP (BOiling WaterProof))	-	4630	NA
4 Table (i)(BWR (Boiling Water Resistant))	-	4630	NA
4 Table (i)(MR (Moisture Ressistant))	-	4630	NA
7.4(Acidity and Alkalinity ( pH))	-	1210	NA

31 Oct, 2025

-
-

IS 4990 (2011)

Plywood for concrete shuttering works - Specification (Third Revision)

21600 View breakup
Total Testing Charges = Rs. 21,600/- Only for Retention of Preservative Chemicals =Rs. 10,400/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7.2(DIMENSIONS & TOLERANCES )	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
7.2(DIMENSIONS & TOLERANCES )	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
7.3(DIMENSIONS & TOLERANCES )	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
7.4(DIMENSIONS & TOLERANCES )	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
7.4(DIMENSIONS & TOLERANCES )	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
8.1(WORKMANSHIP AND FINISH )	-	600	NA
8.3(WORKMANSHIP AND FINISH )	-	600	NA
10.1.1(MOISTURE CONTENT)	-	840	NA
10.1.2, 10.1.2.1 (Table-1)(GLUE ADHESION IN DRY STATE)	-	500	Total Testing Charges for Glue Adhesion Strength in dry state is रु.1000/-
10.1.2, 10.1.2.2(GLUE ADHESION IN DRY STATE)	-	500	Total Testing Charges for Glue Adhesion Strength in dry state is रु.1000/-
10.1.3, 10.1.3.1.1 (Table-1)(RESISTANCE TO WATER TEST)	-	1150	Total Testing Charges for Resistance to water is रु.2300/-
10.1.3, 10.1.3.1.2(RESISTANCE TO WATER TEST)	-	1150	Total Testing Charges for Resistance to water is रु.2300/-
10.1.5(MYCOLOGICAL TEST )	-	770	Total Testing Charges for Resistance to microorganisms (Mycological Test) is रु.2300/-
10.1.5, 10.1.5.1 (Table-1)(MYCOLOGICAL TEST )	-	770	Total Testing Charges for Resistance to microorganisms (Mycological Test) is रु.2300/-
10.1.5.2(MYCOLOGICAL TEST )	-	770	Total Testing Charges for Resistance to microorganisms (Mycological Test) is रु.2300/-
Cl. 10.1.6(Cl. 10.1.6 (Tensile Strength: Parallel to grain))	-	770	Total Testing Charges for Tensile strength is रु.2300/-
Cl. 10.1.6 (Cl. 10.1.6 (Tensile Strength: Perpendicular to grain))	-	770	Total Testing Charges for Tensile strength is रु.2300/-
Cl. 10.1.6(Cl. 10.1.6 (Tensile Strength: Sum of the Tensile Strength in two directions))	-	770	Total Testing Charges for Tensile strength is रु.2300/-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Average))	-	580	Total Testing Charges for Modulus of Elasticity is रु.2300/-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	580	Total Testing Charges for Modulus of Elasticity is रु.2300/-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Average))	-	580	Total Testing Charges for Modulus of Elasticity is रु.2300/-
Cl. 10.1.7 (Table 2)(Cl. 10.1.7 (Table 2) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	580	Total Testing Charges for Modulus of Elasticity is रु.2300/-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Average))	-	580	Total Testing Charges for Modulus of Rupture is रु.2300/-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	580	Total Testing Charges for Modulus of Rupture is रु.2300/-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Average))	-	580	Total Testing Charges for Modulus of Rupture is रु.2300/-
Cl. 10.1.7 (Table 2) (Cl. 10.1.7 (Table 2) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	580	Total Testing Charges for Modulus of Rupture is रु.2300/-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-	580	Total Testing Charges for Wet Bending Strength Modulus of elasticity is रु.2300/-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	580	Total Testing Charges for Wet Bending Strength Modulus of elasticity is रु.2300/-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-	580	Total Testing Charges for Wet Bending Strength Modulus of elasticity is रु.2300/-
Cl. 10.1.8 (Table 3)(Cl. 10.1.8 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	580	Total Testing Charges for Wet Bending Strength Modulus of elasticity is रु.2300/-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-	580	Total Testing Charges for Wet Bending Strength Modulus of Rupture is रु.2300/-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	580	Total Testing Charges for Wet Bending Strength Modulus of Rupture is रु.2300/-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-	580	Total Testing Charges for Wet Bending Strength Modulus of Rupture is रु.2300/-
Cl. 10.1.8 (Table 3) (Cl. 10.1.8 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	580	Total Testing Charges for Wet Bending Strength Modulus of Rupture is रु.2300/-
10.1.9(RETENTION OF PRESERVATIVE)	-	11670	NA

31 Oct, 2025

-
-

IS 12823 (2015)

Prelaminated Particle Boards from Wood and other Lignocellulosic Material - Specification ( First Revision )

Grade I/II Type I/II/III/IV

19420 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl 8(Dimensions & Tolerances)	-	630	NA
Cl 10.2(Test For Density)	-	840	NA
Cl 10.3(Test For Moisture Content)	-	840	NA
Cl 10.4(For Water AbsorptionTest )	-	2300	NA
Cl 10.5(For Swelling in water Test )	-	2300	NA
Cl 10.6(Tesr For Modulus Of Elasticity & Mudulus Of Rupture)	-	4600	Testing Charges for Modulus of Elasticity and Modulus of Rupture is रु.2300/- each.
Cl 10.7(For Determination of Tensile Strength Perpendicular to Surface)	-	2300	NA
Cl 10.8(For Determination of Tensile Strength Perpendicular to Surface After Ageing Test)	-	2300	NA
Cl 10.9(Test For Screw Withdrawal Strength)	-	1750	NA
Cl 10.10 & Annex C( Test For Abrasion Resistance)	-	3500	NA
Cl 10.11 & Annex D( Test For Resistance to Steam)	-	650	NA
Cl 10.12 & Annex E( Test For Crack Resistance)	-	550	NA
Cl 10.13 & Annex F( Test For Resistance to Cigarette Burn)	-	550	NA
Cl 10.14 & Annex G( Test For Resistance to Stain)	-	510	NA

31 Oct, 2025

-
-

IS 14587 (1998)

Prelaminated Medium Density Fibre Board -specification

Grade I / II, Type I/II/III/IV

21670 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions and tolerances)	-	630	NA
10.2, Table-1(Test for Density)	-	840	NA
10.4, Table-1(Test for Water Absorption)	-	2300	NA
10.5(test for swelling in water)	-	2300	NA
10.6(test for modulis of rupture)	-	2300	NA
10.7(Test for tensile strength perpendicular to Surface)	-	1750	NA
10.8(Test for tensile strength perpendicular to Surface after ageing )	-	1750	NA
10.9(test screw withdrawal strength)	-	1750	NA
10.1(test for surface abrasion resistance)	-	3500	NA
10.11(test for resistance to steam)	-	650	NA
10.12(test for resistance to crack)	-	550	NA
10.13(test for resistance to cigarette burn)	-	550	NA
10.14(test for resistance to stain)	-	510	NA

31 Oct, 2025

-
-

IS 10701 (2012)

Structural plywood - Specification (First Revision)

BWP

24000 View breakup
Total Testing Charges =Rs. 24,000/- Only for Retention of Preservative Chemicals=12,800/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause 11.2(Moisture content)	-	840	NA
11.3(Glue Shear strength in dry state)	-	1000	NA
11.4.1(Resistance to Water)	-	1150	Total Testing Charges for Resistance to Water is रु.2300/-
11.4.2(Resistance to Water)	-	1150	Total Testing Charges for Resistance to Water is रु.2300/-
11.5(Resistance to Micro-organisms)	-	2300	NA
11.6(Tensile Strength)	-	2300	NA
11.7.1(Compressive Strength, Bending Strength, Panel Shear Strength, Plate Shear Strength and Rolling Shear Strngth)	-	16400	Testing Charges for Compressive Strength is रु.2200/- Testing Charges for Bending Strength (MoR & MoE) is रु.4600/- Testing Charges for Panel Shear Strength, Plate Shear Strength and Rolling Shear Strength is रु.3200/-each.
11.8(Wet Bending Strength)	-	4600	Testing Charges for Wet Bending Strength MoR & MoE is रु.2300/- each.

31 Oct, 2025

-
-

IS 710 (2010)

Marine plywood - Specification (Second Revision)

BWP

16800 View breakup
Total Testing Charges =Rs. 20,800/- Only for Retention of Preservative Chemicals=9,600/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(DIMENSIONS)	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
6.1(DIMENSIONS)	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
6.2(DIMENSIONS)	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
7.1(WORKMANSHIP AND FINISH )	-	600	NA
9.1.1(MOISTURE CONTENT)	-	800	NA
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Average ))	-	340	Total Testing Charges for Glue Adhesion in Dry State is रु.1000/-
9.1.2 , 9.1.2.2(Glue Adhesion in Dry State)	-	340	Total Testing Charges for Glue Adhesion in Dry State is रु.1000/-
9.1.3 , 9.1.3.1.1(Water resistance test)	-	770	Total Testing Charges for Resistance to water (After 72 hrs boiling) is रु.2300/-
9.1.3 , 9.1.3.1.2(Water resistance test)	-	770	Total Testing Charges for Resistance to water (After 72 hrs boiling) is रु.2300/-
9.1.5 , 9.1.3.1.1(Mycological test)	-	1150	Total Testing Charges for Resistance to microorganisms (Mycological Test) is रु.2300/-
9.1.5 , 9.1.3.1.2(Mycological test)	-	1150	Total Testing Charges for Resistance to microorganisms (Mycological Test) is रु.2300/-
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Parallel to grain))	-	770	Total Testing Charges for Tensile Strength is रु.2300/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Average))	-	580	Total Testing Charges for Modulus of Elasticity is रु.2300/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	580	Total Testing Charges for Modulus of Elasticity is रु.2300/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Average))	-	580	Total Testing Charges for Modulus of Elasticity is रु.2300/-
Cl. 9.1.6 (Table 3)(Cl. 9.1.6 (Table 3) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	580	Total Testing Charges for Modulus of Elasticity is रु.2300/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Average))	-	580	Total Testing Charges for Modulus of Rupture is रु.2300/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	580	Total Testing Charges for Modulus of Rupture is रु.2300/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Average))	-	580	Total Testing Charges for Modulus of Rupture is रु.2300/-
Cl. 9.1.6 (Table 3) (Cl. 9.1.6 (Table 3) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	580	Total Testing Charges for Modulus of Rupture is रु.2300/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Average))	-	580	Total Testing Charges for Modulus of Elasticity Wet is रु.2300/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Along the Face Grain: Minimum Individual))	-	580	Total Testing Charges for Modulus of Elasticity Wet is रु.2300/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Average))	-	580	Total Testing Charges for Modulus of Elasticity Wet is रु.2300/-
Cl. 9.1.7 (Table 4)(Cl. 9.1.7 (Table 4) (Modulus of Elasticity: Across the Face Grain: Minimum Individual))	-	580	Total Testing Charges for Modulus of Elasticity Wet is रु.2300/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Average))	-	580	Total Testing Charges for Modulus of Rupture Wet is रु.2300/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Along the Face Grain: Minimum Individual))	-	580	Total Testing Charges for Modulus of Rupture Wet is रु.2300/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Average))	-	580	Total Testing Charges for Modulus of Rupture Wet is रु.2300/-
Cl. 9.1.7 (Table 4) (Cl. 9.1.7 (Table 4) (Modulus of Rupture: Across the Face Grain: Minimum Individual))	-	580	Total Testing Charges for Modulus of Rupture Wet is रु.2300/-
9.1.8(Retention of preservative)	-	11670	NA
6.3(DIMENSIONS)	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
6.3(DIMENSIONS)	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
Cl. 9.1.2, 9.1.2.1 (Cl. 9.1.2 (Glue Adhesion in Dry State), 9.1.2.1 ( Glue Shear Strength: Individual))	-	340	Total Testing Charges for Glue Adhesion in Dry State is रु.1000/-
Cl. 9.1.3, 9.1.3.1.1 (Cl. 9.1.3 (Water Resistance Test) , 9.1.3.1.1 (Glue Shear Strength: Individual))	-	770	Total Testing Charges for Resistance to water (After 72 hrs boiling) is रु.2300/-
Cl. 9.1.4 (Cl. 9.1.4 (Tensile Strength: Perpendicular to grain))	-	770	Total Testing Charges for Tensile Strength is रु.2300/-
Cl. 9.1.4(Cl. 9.1.4 (Tensile Strength: Sum of the Tensile Strength in two directions))	-	770	Total Testing Charges for Tensile Strength is रु.2300/-

31 Oct, 2025

-
-

IS 303 (1989)

Plywood for General Purposes -

MR AND BWR

5790 View breakup
Total Testing Charges for BWR Grade = Rs. 4,240/- Total Testing Charges for MR Grade = Rs. 6,400/-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
8(Dimensions & Tolerances - Length - Cl. 8)	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
8(Dimensions & Tolerances - Width - Cl. 8)	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
8(Dimensions & Tolerances - Thickness - Cl. 8)	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
8(Dimensions & Tolerances - Squareness - Annexure C)	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
8(Dimensions & Tolerances - Edge Straightness - Annexure C)	-	130	Total Testing Charges for Dimensions and Tolerance is रु.630/-
11.3(Moisture Content - Part 1 of IS 1734)	-	840	NA
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for MR Grade])	-	2300	NA
11.2.2(Glue Adhesion - Mycological test - 11.2.2, Part 7 of IS 1734 [for MR Garde only])	-	2300	Test parameter not required for BWR Grade plywood.
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Average)	-	580	Total Testing Charges for Static Bending Strength - Modulus of Elasticity is रु.2300/-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Along the Face Grain - Minimum Individual)	-	580	Total Testing Charges for Static Bending Strength - Modulus of Elasticity is रु.2300/-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Average)	-	580	Total Testing Charges for Static Bending Strength - Modulus of Elasticity is रु.2300/-
11.4, Table 4(Static Bending Strength - Modulus of Elasticity - Across the Face Grain - Minimum Individual)	-	580	Total Testing Charges for Static Bending Strength - Modulus of Elasticity is रु.2300/-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Average)	-	580	Total Testing Charges for Static Bending Strength - Modulus of Rupture is रु.2300/-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Along the Face Grain - Minimum Individual)	-	580	Total Testing Charges for Static Bending Strength - Modulus of Rupture is रु.2300/-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Average)	-	580	Total Testing Charges for Static Bending Strength - Modulus of Rupture is रु.2300/-
11.4, Table 4(Static Bending Strength - Modulus of Rupture - Across the Face Grain - Minimum Individual)	-	580	Total Testing Charges for Static Bending Strength - Modulus of Rupture is रु.2300/-
11.2.1(Glue Adhesion - Water resistance test - 11.2.1.1 [for BWR Grade])	-	2300	NA
5.1(Type - For AA Type)	-	600	NA
5.1(Type - For AB Type)	-	600	NA
5.1(Type - For BB Type)	-	600	NA
9(Workmanship and Finish - Cl.9, 8.3, Annexure C)	-	600	NA
5.2, Table 1, Table 2(Quality Requirements - Cl. 5.2)	-	650	NA

31 Oct, 2025

-
-

Bureau of Indian Standards

The National Standards Body of India

Institute of Wood Science and Technology (IWST), Field Station, Kolkata

2/2 Biren Roy Road West, Kolkata, Kolkata, West Bengal, 700061

9874219758 samplecellfsk@icfre.org

Scope List

No Record Found