BIS - LIMS (Laboratory Information Management System)

Bharat Test House Pvt Ltd 781 Haryana

781, HSIIDC Rai Industrial Estate, Sonipat, Sonipat, Haryana, 131029

9810562215 director@bharattesthouse.com

Scope List

Reset

60 Results

S.No.

Indian Standard No.

Product

Grade / Type / Size / Designation etc.

Exclusion

Testing Charges (Excl. Of Taxes)

Facility Type

Effective Date

Validity Date

Remark

IS 2993 : Part 2 (2024)

a.c. Motor Capacitors Part 2 Motor Start Capacitors ( Third Revision )

A.C. Motor Capacitors

430500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5.1.1.1(General)	-	0	-
5.1.7(Voltage test between the terminals)	-	2500	-
5.1.8(Voltage test between terminals and case)	-	3000	-
5.1.9(Capacitance measurement)	-	5000	-
5.1.10(Check of dimensions)	-	500	-
5.1.10(Check of dimensions)	-	500	-
5.1.11.1(Robustness of terminations)	-	2000	-
5.1.11.2(Soldering)	-	2000	-
5.1.11.3(Vibration)	-	2000	-
5.1.12(Sealing test)	-	4500	-
5.1.13(Endurance test)	-	343000	-
5.1.14(Damp heat test)	-	40000	-
5.1.15(Self-healing test)	-	12000	-
5.1.16(Destruction test)	-	2000	-
5.1.17.1(Ball-pressure test)	-	5000	-
5.1.17.2(Glow-wire test)	-	5000	-
5.1.17.3(Tracking test)	-	5000	-
5.2(Overloads)	-	2000	-
5.3.1(Creepage distances and clearances)	-	700	-
5.3.2(Terminals and connecting cables)	-	500	-
5.3.3(Earth connections)	-	500	-
5.3.4(Discharge devices)	-	800	-
5.3.5(Pollution)	-	500	-
5.4(Marking)	-	500	-
6.1.6(Voltage test between the terminals)	-	2500	-
6.1.7(Voltage test between terminals and case)	-	3000	-
6.1.8(Capacitance and power factor measurement)	-	5000	-
6.1.9(Check of dimensions)	-	1000	-
6.1.10.1(Robustness of terminations)	-	3000	-
6.1.10.2(Soldering)	-	3000	-
6.1.10.3(Vibration)	-	3000	-
6.1.10.4(Fixing bolt or stud (if fitted))	-	3000	-
6.1.10.4(Fixing bolt or stud (if fitted))	-	3000	-
6.1.10.5(Rapid change of temperature)	-	3000	-
6.1.11(Sealing test)	-	5000	-
6.1.12(Endurance test)	-	315000	-
6.1.13(Damp heat test)	-	40000	-
6.1.14(Pressure relief test)	-	15000	-
6.1.15.1(Ball-pressure test)	-	25000	-
6.1.15.2(Glow-wire test)	-	25000	-
6.1.15.3(Tracking test)	-	25000	-
6.2(Overloads)	-	2000	-
6.3.1(Creepage distances and clearances)	-	700	-
6.3.2(Terminals and connecting cables)	-	500	-
6.3.3(Earth connections)	-	500	-
6.3.4(Discharge devices)	-	800	-
6.3.5(Pollution)	-	500	-
6.4(Marking)	-	500	-
7.2.1(Measurement of working voltage)	-	0	-
7.2.2(Influence of capacitance)	-	0	-
7.3(Checking capacitor temperature)	-	0	-
7.4(Checking transients)	-	0	-
7.5(Storage of electrolytic capacitors)	-	0	-
Annex A(Test voltage)	-	0	-

Complete

31 Dec, 2023

included w.e.f.05.11.2024

IS 302 : Part 2 : Sec 207 (1994)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 207 electric hot plates

Electric hot plates

22500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	0	-
5(Rating)	-	100	-
6(Classification)	-	100	-
7(Marking)	-	100	-
11(TEMPERATURE RISE)	-	1500	-
12("OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS")	-	1000	-
13(" ELECTRICAL INSULATION AND LEKAGE CURRENT AT OPERATING TEMPERATURE ")	-	800	-
15(MOISTURE RESISTANCE)	-	3000	-
16("INSULATION RESlSTANCE AND specified in 16.2. ELECTRIC SHOCK STRENGTH ( AFTER HUMIDITY TREATMENT )")	-	800	-
19(ABNORMAL OPERATION)	-	2000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	500	-
21(MECHANICAL STRENGTH)	-	800	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	500	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	750	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	500	-
27(PROVISION FOR EARTHING)	-	500	-
28(SCREWS AND CONNECTIONS)	-	600	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	2000	-
31(RESISTANCE TO RUSTING)	-	750	-
8("PROTECTION AGAINST ELECTRIC SHOCK ")	-	500	-

Complete

31 Dec, 2023

Included.w.e.f.13.11.2024. Exclusion : 19.11.4.1 to 19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 46 (1993)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 46 electric steam cookers

Electric Steam Cookers

27500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General)	-	0	-
5(Rating)	-	100	-
6(Classification)	-	100	-
7(Marking)	-	100	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	500	-
9("STARTING OF MOTOR-OPERATING APPLIANCES ")	-	0	-
10(INPUT AND CURRENT)	-	1000	-
11(TEMPERATURE RISE)	-	1500	-
12("OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS")	-	1000	-
13(" ELECTRICAL INSULATION AND LEKAGE CURRENT AT OPERATING TEMPERATURE ")	-	800	-
14("RADIO AND TELEVISION INTERFERENCE SUPPRESSION")	-	2000	-
15(MOISTURE RESISTANCE)	-	4000	-
16("INSULATION RESlSTANCE AND specified in 16.2. ELECTRIC SHOCK STRENGTH ( AFTER HUMIDITY TREATMENT )")	-	800	-
17(OVERLOAD PROTECTION)	-	1500	-
19(ABNORMAL OPERATION)	-	2000	-
20("STABILITY AND MECHANICAL HAZARDS")	-	500	-
21(MECHANICAL STRENGTH)	-	1000	-
21(MECHANICAL STRENGTH)	-	1000	-
22(CONSTRUCTION)	-	2000	-
22(CONSTRUCTION)	-	2000	-
23(INTERNAL WIRING)	-	500	-
24(COMPONENTS)	-	0	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	1000	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	500	-
27(PROVISION FOR EARTHING)	-	1000	-
28(SCREWS AND CONNECTIONS)	-	600	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	2000	-
31(RESISTANCE TO RUSTING)	-	1000	-
31(RESISTANCE TO RUSTING)	-	1000	-
32(RADIATION HAZARDS)	-	500	-
4(General)	-	0	-
5(Rating)	-	0	-
6(Classification)	-	0	-
7(Marking)	-	0	-
8("8 PROTECTION AGAINST ELECTRIC SHOCK ")	-	0	-
9("STARTING OF MOTOR-OPERATING APPLIANCES ")	-	0	-
10(INPUT AND CURRENT)	-	0	-
11(TEMPERATURE RISE)	-	0	-
12("OPERATION UNDER OVERLOAD CONDITIONS OF APPLIANCES WITH HEATING ELEMENTS")	-	0	-
13(" ELECTRICAL INSULATION AND LEKAGE CURRENT AT OPERATING TEMPERATURE ")	-	0	-
14("RADIO AND TELEVISION INTERFERENCE SUPPRESSION")	-	0	-
15(MOISTURE RESISTANCE)	-	0	-
16("INSULATION RESlSTANCE AND specified in 16.2. ELECTRIC SHOCK STRENGTH ( AFTER HUMIDITY TREATMENT )")	-	0	-
17(OVERLOAD PROTECTION)	-	0	-
19(ABNORMAL OPERATION)	-	0	-
20("STABILITY AND MECHANICAL HAZARDS")	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	0	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
32(RADIATION HAZARDS)	-	0	-
20("STABILITY AND MECHANICAL HAZARDS")	-	0	-
21(MECHANICAL STRENGTH)	-	0	-
22(CONSTRUCTION)	-	0	-
23(INTERNAL WIRING)	-	0	-
24(COMPONENTS)	-	0	-
25("SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CABLES AND CORDS ")	-	0	-
26("TERMINALS FOR EXTERNAL CONDUCTORS")	-	0	-
27(PROVISION FOR EARTHING)	-	0	-
28(SCREWS AND CONNECTIONS)	-	0	-
30("RESISTANCE TO HEAT, FIRE AND TRACKING ")	-	0	-
31(RESISTANCE TO RUSTING)	-	0	-
32(RADIATION HAZARDS)	-	0	-

Complete

31 Dec, 2023

Included.w.e.f.13.11.2024. Exclusion : 19.11.4.1 to 19.11.4.7 (EMI/EMC)

IS 302 : Part 2 : Sec 21 (2024)

Household and Similar Electrical Appliancesï¿½Safety Part 2 Particular Requirements Section 21 Storage Water Heaters

Storage Water Heaters

15000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(General requirement)	-	0	-
5(General conditions for the tests)	-	0	-
6(Classification)	-	100	-
7(Marking and instructions)	-	100	-
8(Protection against access to live parts)	-	100	-
9(Starting of motor-operated appliances)	-	0	-
10(Power input and current)	-	500	-
11(Heating)	-	600	-
13(Leakage current and electric strength at operating temperature)	-	350	-
14(Transient overvoltages)	-	550	-
15(Moisture resistance)	-	1200	-
16(Leakage current and electric strength)	-	350	-
17(Overload protection of transformers and associated circuits)	-	400	-
18(Endurance)	-	1300	-
19(Abnormal operation)	-	1300	-
20(Stability and mechanical hazards)	-	500	-
21(Mechanical strength)	-	500	-
22(Construction)	-	600	-
23(Internal wiring)	-	500	-
24(Components)	-	100	-
25(Supply connection and external flexible cords)	-	500	-
26(Terminals for external conductors)	-	350	-
27(Provision for earthing)	-	100	-
28(Screws and connections)	-	100	-
29(Clearances, creepage distances and solid insulation)	-	400	-
30(Resistance to heat and fire)	-	800	-
31(Resistance to rusting)	-	1000	-
32(Radiation, toxicity and similar hazards)	-	1000	-
A.101(Pressure test)	-	1000	-

Complete

31 Dec, 2023

included.w.e.f 30.10.2024 Exclusion cl 19.11.4.1 to cl 19.11.4.7

IS 1287 (1993)

Electric toasters - Specification (Third Revision)

Electric Toasters

37000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Rating)	-	50	5% discount for BIS
7(Classification)	-	50	5% discount for BIS
8(Marking)	-	50	5% discount for BIS
9(Safety Requirements)	-	200	5% discount for BIS
11(Overall dimension)	-	200	5% discount for BIS
12(Length of the Flexible cord)	-	200	5% discount for BIS
13(Mass)	-	500	5% discount for BIS
14(Number and Dimensions of the toasing chambers, toasting surfaces and heating elements)	-	1500	5% discount for BIS
15(Force necessary to operate the bread carriage)	-	1250	5% discount for BIS
16(Preparation of bread for toasters)	-	1250	5% discount for BIS
17(Browning control setting)	-	1500	5% discount for BIS
18(Toasting)	-	2500	5% discount for BIS
19(Toasting time)	-	1550	5% discount for BIS
20(Evenness of Browning)	-	1500	5% discount for BIS
21(Browning control characteristic)	-	1500	5% discount for BIS
22(Endurance)	-	7000	5% discount for BIS
23(Finish)	-	250	5% discount for BIS
24(Functional Provision)	-	100	5% discount for BIS
Cl-9 (Cl-8 of IS 302-2-9)(PROTECTION AGAINST ACCESS TO LIVE PARTS)	-	200	5% discount for BIS
Cl-9 (Cl-10 of IS 302-2-9)(POWER INPUT AND CURRENT)	-	200	5% discount for BIS
Cl-9 (Cl-11 of IS 302-2-9)(HEATING)	-	200	5% discount for BIS
Cl-9 (Cl-13 of IS 302-2-9)(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	200	5% discount for BIS
Cl-9 (Cl-14 of IS 302-2-9)(TRANSIENT OVERVOLTAGES)	-	200	5% discount for BIS
Cl-9 (Cl-15 of IS 302-2-9)(MOISTURE RESISTANCE)	-	3250	5% discount for BIS
Cl-9 (Cl-16 of IS 302-2-9)(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	200	5% discount for BIS
Cl-9 (Cl-17 of IS 302-2-9)(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	200	5% discount for BIS
Cl-9 (Cl-19 of IS 302-2-9)(ABNORMAL OPERATION)	-	1500	5% discount for BIS
Cl-9 (Cl-20 of IS 302-2-9)(STABILITY AND MECHANICAL HAZARDS)	-	200	5% discount for BIS
Cl-9 (Cl-21 of IS 302-2-9)(MECHANICAL STRENGTH)	-	200	5% discount for BIS
Cl-9 (Cl-22 of IS 302-2-9)(CONSTRUCTION)	-	700	5% discount for BIS
Cl-9 (Cl-23 of IS 302-2-9)(INTERNAL WIRING)	-	750	5% discount for BIS
Cl-9 (Cl-25 of IS 302-2-9)(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1000	5% discount for BIS
Cl-9 (Cl-26 of IS 302-2-9)(TERMINALS FOR EXTERNAL CONDUCTORS)	-	600	5% discount for BIS
Cl-9 (Cl-27 of IS 302-2-9)(PROVISION FOR EARTHING)	-	750	5% discount for BIS
Cl-9 (Cl-28 of IS 302-2-9)(SCREWS AND CONNECTIONS)	-	750	5% discount for BIS
Cl-9 (Cl-29 of IS 302-2-9)(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1250	5% discount for BIS
Cl-9 (Cl-30 of IS 302-2-9)(RESISTANCE TO HEAT AND FIRE)	-	1500	5% discount for BIS
Cl-9 (Cl-31 of IS 302-2-9)(RESISTANCE TO RUSTING)	-	750	5% discount for BIS
Cl-9 (Cl-32 of IS 302-2-9)(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1250	5% discount for BIS

Complete

31 Dec, 2023

REVISED TESTING CHARGES W.E.F. 5-7-2021. Included w.e.f 29-07-2020. Excluding EMI/EMC tests (Electrostatic discharges, radiant fields, fast transient bursts, voltage surges, injected current, voltage dip and interruption, mains signals) (Cl.19.11.4.1 to 19.11.4.7), Components (Capacitors for radio interference suppression, isolating transformer, coupler) (Cl.24.1.1, 24.1.2, 24.1.5)

IS 2418 : Part 1 (2018)

Tubular fluorescent lamps for general lighting service: Part 1 safety requirements (Second Revision)

29500 View breakup
18W & 20W-Rs.19,000/- (2000 hours), 18W & 20W-Rs.27,500/- (3500 hours), 36W & 40W-Rs.21,500/- (2000 hours), 36W & 40W-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Clause No. 4.2 (Marking.)	-	500	5% discount for BIS
Clause No. 4.3(Mechanical requirement for caps)	-	1500	5% discount for BIS
Clause No. 4.4(Insulation Resistance Measurement)	-	2500	5% discount for BIS
Clause No. 4.5(Electric strength )	-	4000	5% discount for BIS
Clause No. 4.6(Parts which can become accidentally live)	-	1250	5% discount for BIS
Clause No. 4.7(Resistance to heat & fire)	-	4250	5% discount for BIS
Clause No. 4.8(Creepage distance for caps)	-	1500	5% discount for BIS
Clause No. 4.9(Lamp cap temperature rise)	-	3500	5% discount for BIS
Clause No. 4.10(Lamp minimum overall length)	-	1500	5% discount for BIS
4.11(Information for Luminaire Design)	-	4500	5% discount for BIS
4.12(Information for Ballast Design)	-	4500	5% discount for BIS
3.9(Routine test)	-	200	5% discount for BIS
7.1.3(Routine Tests)	-	50	5% discount for BIS

Complete

31 Dec, 2023

REVISED TESTING CHARGES W.E.F. 5-7-2021.

IS 369 (2019)

Household electric direct - Acting room heaters - Performance requirements (Fourth Revision)

Household electric direct - Acting room heaters

7000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-2-30:2007(Classification)	-	50	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.7 of IS 302-2-30:2007 &IS:302-1:2008(Marking and Instructions)	-	200	5% discount for BIS
Cl.8 of IS 302-2-30:2007 &IS:302-1:2008(Protection Against Access to Live Parts)	-	200	5% discount for BIS
Cl.10 of IS 302-2-30:2007 &IS:302-1:2008(Power Input and Current)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS 302-2-30:2007 &IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.13 of IS 302-2-30:2007 &IS:302-1:2008(Leakage Current & Electric Strength at operating temp)	-	200	5% discount for BIS
Cl.14 of IS 302-2-30:2007 &IS:302-1:2008(Transient Over Voltages)	-	200	5% discount for BIS
Cl.15 of IS 302-2-30:2007 &IS:302-1:2008(Moisture Resistance)	-	200	5% discount for BIS
Cl.16 of IS 302-2-30:2007 &IS:302-1:2008(Leakage Current & Electric Strength )	-	200	5% discount for BIS
Cl.18 of IS 302-2-30:2007 (Endurance)	-	200	5% discount for BIS
Cl.19 of IS 302-2-30:2007 &IS:302-1:2008(Abnormal Operation)	-	200	5% discount for BIS
Cl.20 of IS 302-2-30:2007 &IS:302-1:2008(Stability & Mechanical Hazards)	-	200	5% discount for BIS
Cl.21 of IS 302-2-30:2007 &IS:302-1:2008(Mechanical Strength)	-	200	5% discount for BIS
Cl.22 of IS 302-2-30:2007 &IS:302-1:2008(Construction)	-	200	5% discount for BIS
Cl.23 of IS 302-2-30:2007 &IS:302-1:2008(Internal Wiring)	-	200	5% discount for BIS
Cl.24 of IS 302-2-30:2007 &IS:302-1:2008(Component)	-	200	5% discount for BIS
Cl.25 of IS 302-2-30:2007 &IS:302-1:2008(Supply Connection and External Flexible Cords )	-	200	5% discount for BIS
Cl.26 of IS 302-2-30:2007 &IS:302-1:2008(Terminal for External Conductors)	-	200	5% discount for BIS
Cl.27 of IS 302-2-30:2007 &IS:302-1:2008(Provision for Earthing)	-	200	5% discount for BIS
Cl.28 of IS 302-2-30:2007 &IS:302-1:2008(Screws and Connections)	-	200	5% discount for BIS
Cl.29 of IS 302-2-30:2007 &IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation.)	-	200	5% discount for BIS
Cl.30 of IS 302-2-30:2007 &IS:302-1:2008(Resistance to Heat and Fire.)	-	200	5% discount for BIS
Cl.31 of IS 302-2-30:2007 &IS:302-1:2008(Resistance to Rusting)	-	200	5% discount for BIS
Cl.7 of IS 369:2019(Dimensions)	-	750	5% discount for BIS
Cl.8 of IS 369:2019(Temperature rises of air-outlet grilles and external surfaces)	-	1500	5% discount for BIS
Cl.9 of IS 369:2019(Temperature rises of surfaces surrounding the heater)	-	1500	5% discount for BIS
Cl.10 of IS 369:2019(Warming-up time of the heater)	-	700	5% discount for BIS
Cl.11 of IS 369:2019(Stability of room temperature)	-	0	-
Cl.12 of IS 369:2019(Set-back)	-	0	-
Cl.13 of IS 369:2019(Frost protection temperature)	-	0	-
Cl.14 of IS 369:2019(Inrush current)	-	1000	5% discount for BIS
Cl.15 of IS 369:2019(Effect of radiant heat)	-	1100	5% discount for BIS
Cl.16 of IS 369:2019(Usable power)	-	0	-

Complete

31 Dec, 2023

IS 302 : Part 2 : Sec 202 (1992)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves

Electric Stoves

19000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	50	5% discount for BIS
7.1(Marking- IS 302-1)	-	50	5% discount for BIS
7.3(Marking- IS 302-1)	-	50	5% discount for BIS
7.4(Marking- IS 302-1)	-	50	5% discount for BIS
7.6(Marking- IS 302-1)	-	50	5% discount for BIS
7.11(Marking- IS 302-1)	-	50	5% discount for BIS
7.12(Marking- IS 302-1)	-	50	5% discount for BIS
7.14(Marking- IS 302-1)	-	50	5% discount for BIS
7.15(Marking- IS 302-1)	-	50	5% discount for BIS
7.101(Marking)	-	50	5% discount for BIS
8( Protection Against Electric Shock, IS 302-1)	-	200	5% discount for BIS
10(Power Input and Current, IS 302-1)	-	700	5% discount for BIS
11(Heating, IS 302-1)	-	1100	5% discount for BIS
12(Operation under overload conditions of appliances with heating elements, IS 302-2-202: 1992)	-	500	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	5% discount for BIS
15.1(Moisture Resistance, IS 302-1)	-	2500	5% discount for BIS
15.3(Moisture Resistance, IS 302-1)	-	2500	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	1000	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	1000	5% discount for BIS
19.2(Abnormal Operation, IS 302-1)	-	2000	5% discount for BIS
19.2(Abnormal Operation, IS 302-1)	-	2000	5% discount for BIS
19.3(Abnormal Operation, IS 302-1)	-	2000	5% discount for BIS
19.3(Abnormal Operation, IS 302-1)	-	2000	5% discount for BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	400	5% discount for BIS
21.1(Mechanical Strength, IS 302-1 & IS 302-2-202)	-	500	5% discount for BIS
22(Construction, IS 302-1)	-	1500	5% discount for BIS
22.101(Construction)	-	1500	5% discount for BIS
22.102(Construction)	-	1500	5% discount for BIS
22.103(Construction)	-	1500	5% discount for BIS
22.104(Construction)	-	1500	5% discount for BIS
22.105(Construction)	-	1500	5% discount for BIS
22.105.1(Construction)	-	1500	5% discount for BIS
22.105.2(Construction)	-	1500	5% discount for BIS
22.106(Construction)	-	1500	5% discount for BIS
22.107(Construction)	-	1500	5% discount for BIS
11.107.1(Construction)	-	1500	5% discount for BIS
23.1(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
23.2(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
23.8(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
23.9(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
23.10(Internal Wiring, IS 302-1)	-	500	5% discount for BIS
24.1(Components, IS 302-1)	-	200	5% discount for BIS
24.101(Components)	-	200	5% discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.4(Supply Connection and External Flexible Cords)	-	500	5% discount for BIS
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
26(Terminals for External Conductors, IS 302-1)	-	500	5% discount for BIS
27.1(Provision for Earthing, IS 302-1)	-	500	5% discount for BIS
27.2(Provision for Earthing, IS 302-1)	-	500	5% discount for BIS
27.3(Provision for Earthing, IS 302-1)	-	500	5% discount for BIS
27.4(Provision for Earthing, IS 302-1)	-	500	5% discount for BIS
27.5(Provision for Earthing, IS 302-1)	-	500	5% discount for BIS
28(Screws & Connections, IS 302-1)	-	500	5% discount for BIS
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	5% discount for BIS
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	1000	5% discount for BIS
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	600	5% discount for BIS
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	600	5% discount for BIS
31(Resistance of Rusting, IS 302-1)	-	2000	5% discount for BIS

Complete

31 Dec, 2023

IS 1293 (2019)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)

8500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Ratings)	-	50	5% discount for BIS
7.1.1(Accessories Classification)	-	50	5% discount for BIS
7.1.2(Accessories Classification)	-	50	5% discount for BIS
7.1.3(Accessories Classification)	-	50	5% discount for BIS
7.1.4(Accessories Classification)	-	50	5% discount for BIS
7.1.5(Accessories Classification)	-	50	5% discount for BIS
7.2.1(Socket-Outlets Classification)	-	50	5% discount for BIS
7.2.2(Socket-Outlets Classification)	-	50	5% discount for BIS
7.2.3(Socket-Outlets Classification)	-	50	5% discount for BIS
7.2.4(Socket-Outlets Classification)	-	50	5% discount for BIS
7.3(Plug Classification)	-	50	5% discount for BIS
8.1(MARKING)	-	50	5% discount for BIS
8.8(MARKING)	-	50	5% discount for BIS
8.9(MARKING)	-	50	5% discount for BIS
9.1(CHECKING OF DIMENSIONS)	-	100	5% discount for BIS
9.2(CHECKING OF DIMENSIONS)	-	100	5% discount for BIS
10.1(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	5% discount for BIS
10.3(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	5% discount for BIS
10.4(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	5% discount for BIS
10.5(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	5% discount for BIS
10.6(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	5% discount for BIS
10.7(PROTECTION AGAINST ELECTRIC SHOCK)	-	100	5% discount for BIS
11.1(PROVISIONS FOR EARTHING)	-	100	5% discount for BIS
11.2(PROVISIONS FOR EARTHING)	-	100	5% discount for BIS
11.3(PROVISIONS FOR EARTHING)	-	100	5% discount for BIS
11.4(PROVISIONS FOR EARTHING)	-	100	5% discount for BIS
11.5(PROVISIONS FOR EARTHING)	-	100	5% discount for BIS
11.6(PROVISIONS FOR EARTHING)	-	100	5% discount for BIS
12.1.1(TERMINALS)	-	200	5% discount for BIS
12.1.2(TERMINALS)	-	200	5% discount for BIS
12.2.1(TERMINALS)	-	200	5% discount for BIS
12.2.2(TERMINALS)	-	200	5% discount for BIS
12.2.3(TERMINALS)	-	200	5% discount for BIS
12.2.4(TERMINALS)	-	200	5% discount for BIS
12.2.5(TERMINALS)	-	200	5% discount for BIS
12.2.6(TERMINALS)	-	200	5% discount for BIS
12.2.7(TERMINALS)	-	200	5% discount for BIS
12.2.8(TERMINALS)	-	200	5% discount for BIS
12.2.9(TERMINALS)	-	200	5% discount for BIS
12.2.10(TERMINALS)	-	200	5% discount for BIS
12.2.11(TERMINALS)	-	200	5% discount for BIS
12.3.1(TERMINALS)	-	200	5% discount for BIS
12.3.2(TERMINALS)	-	200	5% discount for BIS
12.3.3(TERMINALS)	-	200	5% discount for BIS
12.3.4(TERMINALS)	-	200	5% discount for BIS
12.3.5(TERMINALS)	-	200	5% discount for BIS
12.3.6(TERMINALS)	-	200	5% discount for BIS
12.3.7(TERMINALS)	-	200	5% discount for BIS
12.3.8(TERMINALS)	-	200	5% discount for BIS
12.3.9(TERMINALS)	-	200	5% discount for BIS
12.3.10(TERMINALS)	-	200	5% discount for BIS
12.3.11(TERMINALS)	-	200	5% discount for BIS
12.3.12(TERMINALS)	-	200	5% discount for BIS
13.1(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.2(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.3(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.4(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.5(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.6(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.7(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.8(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.9(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.11(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.12(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.13(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.14(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.15(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.16(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.17(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.18(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.19(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.21(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.22(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
13.23(CONSTRUCTIONS OF FIXED SOCKETOUTLETS)	-	200	5% discount for BIS
14.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.3(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.4(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.5(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.6(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.7(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.8(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.9(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.11(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.12(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.13(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.14(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.15(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.16(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.17(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.18(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.19(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.21(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.22(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.23(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.23.1(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.23.2(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.24(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.25(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
14.26(CONSTRUCTION OF PLUGS AND PORTABLE SOCKET-OUTLET)	-	200	5% discount for BIS
15(INTERLOCKED SOCKET-OUTLETS)	-	100	5% discount for BIS
16.1(RESISTANCE TO AGEING,)	-	500	5% discount for BIS
16.2(RESISTANCE TO HARMFUL INGRESS OF WATER AND TO HUMIDITY)	-	500	5% discount for BIS
16.3(Resistance to Humidity)	-	500	5% discount for BIS
17.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	400	5% discount for BIS
17.2(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	400	5% discount for BIS
17.3(INSULATION RESISTANCE AND ELECTRIC STRENGTH)	-	400	5% discount for BIS
18(OPERATION OF EARTHING CONTACTS)	-	200	5% discount for BIS
19(TEMPERATURE RISE)	-	800	5% discount for BIS
20(BREAKING CAPACITY)	-	1000	5% discount for BIS
21(NORMAL OPERATION)	-	1000	5% discount for BIS
22.1(Verification of the Maximum Withdrawal Force)	-	300	5% discount for BIS
22.2(Verification of Minimum Withdrawal Force)	-	300	5% discount for BIS
23.1(FLEXIBLE CABLES AND THEIR CONNECTION)	-	600	5% discount for BIS
23.3(FLEXIBLE CABLES AND THEIR CONNECTION)	-	600	5% discount for BIS
23.4(FLEXIBLE CABLES AND THEIR CONNECTION)	-	600	5% discount for BIS
24.1(MECHANICAL STRENGTH For all kinds of fixed socket-outlets )	-	600	5% discount for BIS
24.1(MECHANICAL STRENGTH For portable multiple and combined socket outlets with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	600	5% discount for BIS
24.1(MECHANICAL STRENGTH For surface mounting boxes)	-	600	5% discount for BIS
24.2(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	600	5% discount for BIS
24.2(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	600	5% discount for BIS
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies other than elastomeric or thermoplastic material)	-	600	5% discount for BIS
24.2(MECHANICAL STRENGTH For plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	600	5% discount for BIS
24.3(MECHANICAL STRENGTH for fixed socket-outlets with a main part intended to be mounted directly on a surface)	-	600	5% discount for BIS
24.4(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	600	5% discount for BIS
24.4(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	600	5% discount for BIS
24.4(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	600	5% discount for BIS
24.5(MECHANICAL STRENGTH For portable single socket-outlets: 1) with enclosures, covers or bodies of thermoplastic or elastomeric material)	-	600	5% discount for BIS
24.5(MECHANICAL STRENGTH For portable multiple and combined socket outlets: 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	600	5% discount for BIS
24.5(MECHANICAL STRENGTH For Plug 1) with enclosures, covers and bodies of elastomeric or thermoplastic material)	-	600	5% discount for BIS
24.6(MECHANICAL STRENGTH For screwed glands of accessories having an IP code higher than IP20)	-	600	5% discount for BIS
24.7(MECHANICAL STRENGTH For plug pins provided with insulating sleeves)	-	600	5% discount for BIS
24.8(MECHANICAL STRENGTH For shuttered socket-outlets)	-	600	5% discount for BIS
24.9(MECHANICAL STRENGTH For portable multiple and combined socket outlets (1) with enclosures, covers or bodies other than thermoplastic or elastomeric material)	-	600	5% discount for BIS
24.11(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	600	5% discount for BIS
24.12(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	600	5% discount for BIS
24.13(MECHANICAL STRENGTH For portable socket-outlets having means for suspension on a wall)	-	600	5% discount for BIS
24.14.1(MECHANICAL STRENGTH For fixed socket-outlets)	-	600	5% discount for BIS
24.14.2(MECHANICAL STRENGTH For fixed socket-outlets)	-	600	5% discount for BIS
24.14.3(MECHANICAL STRENGTH For plugs and portable socket-outlets)	-	600	5% discount for BIS
24.15(MECHANICAL STRENGTH )	-	600	5% discount for BIS
24.16(MECHANICAL STRENGTH For shroud of portable socket-outlets)	-	600	5% discount for BIS
25.1(RESISTANCE TO HEAT Accessories and surface mounting boxes)	-	600	5% discount for BIS
25.2(RESISTANCE TO HEAT Parts of insulating material necessary to retain current-carrying parts of the earthing circuit in position, as well as parts of the front surface zone of thermoplastic material)	-	600	5% discount for BIS
25.3(RESISTANCE TO HEAT Parts of insulating material not necessary to retain current-carrying parts and parts of the earthing circuit in position, even though they are in contact with them)	-	600	5% discount for BIS
25.4(RESISTANCE TO HEAT )	-	600	5% discount for BIS
26.1(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	5% discount for BIS
26.2(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	5% discount for BIS
26.3(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	5% discount for BIS
26.4(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	5% discount for BIS
26.5(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	5% discount for BIS
26.6(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	5% discount for BIS
26.7(SCREWS, CURRENT-CARRYING PARTS AND CONNECTIONS)	-	200	5% discount for BIS
27.1(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100	5% discount for BIS
27.2(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100	5% discount for BIS
27.3(CREEPAGE DISTANCES, CLEARANCES AND DISTANCES THROUGH SEALING COMPOUND)	-	100	5% discount for BIS
28.1.1(Resistance to Abnormal Heat and to Fire Glow-Wire Test)	-	500	5% discount for BIS
28.1.2(Resistance to Abnormal Heat and to Fire for plugs with pins provided with insulating sleeves)	-	500	5% discount for BIS
28.2(Resistance to Tracking For accessories other than IP code higher than IPX0 parts of insulating material retaining live parts in position)	-	500	5% discount for BIS
29(RESISTANCE TO RUSTING)	-	550	5% discount for BIS
30.1(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Pressure Test at High Temperature)	-	1000	5% discount for BIS
30.2(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Static Damp Heat Test)	-	1000	5% discount for BIS
30.3(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Tests at Low Temperature)	-	1000	5% discount for BIS
30.4(ADDITIONAL TESTS ON PINS PROVIDED WITH INSULATING SLEEVES Impact Test at Low Temperature)	-	1000	5% discount for BIS

Complete

31 Dec, 2023

IS 8978 (1992)

Specification for electric instantaneous water heaters (Second Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.10 of IS 8978 : 1992(Finish)	-	450	5% discount for BIS
Cl.10 of IS 8978 : 1992(Finish)	-	450	5% discount for BIS
Cl.11 of IS 8978 : 1992(Operation of flow switch)	-	200	5% discount for BIS
Cl.12 of IS 8978 : 1992(Endurance)	-	450	5% discount for BIS
Cl.12 of IS 8978 : 1992(Endurance)	-	450	5% discount for BIS
Cl.7 of IS 302-2-35:2017(Marking)	-	100	5% discount for BIS
Cl.6 of IS 302-2-35:2017(Classification)	-	100	5% discount for BIS
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	100	5% discount for BIS
Cl.10 of IS 302-2- 35:2011(Power Input & Current )	-	1500	5% discount for BIS
Cl.11 of 302-2-35:2017(Heating)	-	1500	5% discount for BIS
Cl.13 of IS 302-2-35:2017(Leakage Current & Electrical Strength at Operating Temperature )	-	1000	5% discount for BIS
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	100	5% discount for BIS
Cl.15 of IS 302-2-35-2011(Moisture Resistance )	-	2000	5% discount for BIS
Cl.16 of IS 302-2-35:2011(Leakage Current and Electric Strength)	-	1000	5% discount for BIS
Cl.17 IS 302-2-35:2017(Overload Protection of Transformers & Associated circuits )	-	50	5% discount for BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation)	-	1000	5% discount for BIS
Cl.20 of IS 302-2-35-2011(Stability & Mechanical Hazards )	-	100	5% discount for BIS
Cl.22 of IS 302-2-35-2011(Construction )	-	1000	5% discount for BIS
Cl.23 of IS 302-2-35-2011(Internal Wiring)	-	100	5% discount for BIS
Cl.24 of IS 302-2-35:2017(Component )	-	50	5% discount for BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	100	5% discount for BIS
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	100	5% discount for BIS
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	100	5% discount for BIS
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	100	5% discount for BIS
Cl.29 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation)	-	100	5% discount for BIS
Cl.30 of IS 302-2-35: 2011(Resistance to Heat and Fire)	-	500	5% discount for BIS
Cl.31 of IS 302-2-35: 2011(Resistance to Rusting )	-	450	5% discount for BIS
Cl.32 of IS 302-2-35: 2011(Radiation, Toxicity and Similar Hazards )	-	50	5% discount for BIS
Cl.31 of IS 302-2-35: 2017(Resistance to Rusting )	-	450	5% discount for BIS
Cl.30.1 of IS 302-1:2008(Resistance to Heat and Fire)	-	450	5% discount for BIS
Cl.30.2 of IS 302-1:2008(Resistance to Heat and Fire)	-	450	5% discount for BIS
Cl.29.1 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Clearance distance )	-	100	5% discount for BIS
Cl.29.2 of IS 302-2-35:2017(Clearances, Creepage Distances and Solid Insulation : Creepage distance )	-	100	5% discount for BIS
Cl.28 of IS 302-2-35:2017(Screws and Connections )	-	100	5% discount for BIS
Cl.27 of IS 302-2-35:2017(Provision for Earthing)	-	100	5% discount for BIS
Cl.27.5 of IS 302-2-35:2017(Provision for Earthing : ECR )	-	100	5% discount for BIS
Cl.26 of IS 302-2-35:2017(Terminals for External Conductors)	-	100	5% discount for BIS
Cl.25 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	100	5% discount for BIS
Cl.25.1 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : connection to the supply mains)	-	100	5% discount for BIS
Cl.25.5 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Type of attachment )	-	100	5% discount for BIS
Cl.25.8 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Resistance of supply cord )	-	100	5% discount for BIS
Cl.25.10 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Colour of Earthing conductor )	-	100	5% discount for BIS
Cl.25.12 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Moulding of supply cord )	-	100	5% discount for BIS
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test )	-	100	5% discount for BIS
Cl.25.15 of IS 302-2-35:2017(Supply Connection & External Flexible Cords : Cord grip test - displacement )	-	100	5% discount for BIS
Cl.25.18 of IS 302-2-35:2017(Supply Connection & External Flexible Cords)	-	100	5% discount for BIS
Cl.24 of IS 302-2-35:2017(Component )	-	50	5% discount for BIS
Cl.23 of IS 302-2-35:2017(Internal Wiring ; Colour of earthing conductor)	-	100	5% discount for BIS
Cl.23 of IS 302-2-35:2017(Internal Wiring)	-	100	5% discount for BIS
Cl.22.1 of IS 302-1:2008(Construction : IP test )	-	1000	5% discount for BIS
Cl.22.2 of IS 302-1:2008(Construction : connection to supply mains )	-	1000	5% discount for BIS
Cl.22.6 of IS 302-1:2008(Construction : effect of water on 3 insulation )	-	1000	5% discount for BIS
Cl.22.6 of IS 302-2-35:2017(Construction : size of drain hole )	-	1000	5% discount for BIS
Cl.22.7 of IS 302-1:2008(Construction : safeguards against the risk of excessive pressure. )	-	1000	5% discount for BIS
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	1000	5% discount for BIS
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knob, grips, levers and similar parts )	-	1000	5% discount for BIS
Cl.22.14 of IS 302-1:2008(Construction : Ragged or sharp edges )	-	1000	5% discount for BIS
Cl.22.17 of IS 302-1:2008(Construction : Spacers )	-	1000	5% discount for BIS
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	1000	5% discount for BIS
Cl 22.26 ,Cl.22.28, Cl 22.29, Cl 22.30 , Cl 22.31, Cl 22.32 of IS 302-1:2008(Construction : Supplymentry/ double / reinforced insulation for Class II/ Class III appliance )	-	1000	5% discount for BIS
Cl.22.33 of IS 302-1:2008(Construction : Direct contact of liquids )	-	1000	5% discount for BIS
Cl.22.34, Cl 22.35 of IS 302-1:2008(Construction : Shaft of operating Knobs )	-	1000	5% discount for BIS
Cl.22.44 of IS 302-1:2008(Construction : Shape and decoration )	-	1000	5% discount for BIS
Cl.22.47 of IS 302-2-35:2017(Construction : Water pressure test )	-	1000	5% discount for BIS
Cl.22.101 of IS 302-2-35:2017(Construction : Rated pressure of closed water heater )	-	1000	5% discount for BIS
Cl.22.102 of IS 302-2-35:2017(Construction : excessive temperature of outlet )	-	1000	5% discount for BIS
Cl.22.103 of IS 302-2-35:2017(Construction : Pressure relief device operation for closed water heater )	-	1000	5% discount for BIS
Cl.22.104 of IS 302-2-35:2017(Construction : Pressure in open outlet water heaters )	-	1000	5% discount for BIS
Cl.22.106 of IS 302-2-35:2017(Construction : Operation of thermal cut out for closed water heater )	-	1000	5% discount for BIS
Cl.22.107 of IS 302-2-35:2017(Construction : Temperature of outlet )	-	1000	5% discount for BIS
Cl.22.108 of IS 302-2-35:2017(Construction : Temperature of outlet water intended to supply for showring )	-	1000	5% discount for BIS
Cl.22.109 of IS 302-2-35:2017(Construction : Operation of presure switch of open outlet water heater )	-	1000	5% discount for BIS
Cl.22.110 of IS 302-2-35:2017(Construction : Provision for fixing to wall )	-	1000	5% discount for BIS
Cl.21.1 of IS 302-1:2008(Mechanical strength : Rough handling in normal use)	-	100	5% discount for BIS
Cl. 21.2 of IS 302-1:2008(Mechanical strength : prevent penetration by sharp implements. )	-	100	5% discount for BIS
Cl.20 of IS 302-2-35:2017(Stability & Mechanical Hazards )	-	100	5% discount for BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Emission of flames, molten metal ,or poisonous or ignitable gas)	-	1000	5% discount for BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of test corner)	-	1000	5% discount for BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : Temperature rise of insulation of supply cord)	-	1000	5% discount for BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : High voltage)	-	1000	5% discount for BIS
Cl.19 of IS 302-2-35:2017(Abnormal Operation : effect on container)	-	1000	5% discount for BIS
Cl.16 of IS 302-2-35:2017(Leakage Current and Electric Strength (After Humidity))	-	1000	5% discount for BIS
Cl.15 of IS 302-2-35:2017(Moisture Resistance )	-	2000	5% discount for BIS
Cl.14 of IS 302-2-35:2017(Transient Over Voltages )	-	100	5% discount for BIS
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature )	-	1000	5% discount for BIS
Cl.13 of IS 302-2-35:2017(Leakage Current & 3 Strength at Operating Temperature : High voltage )	-	1000	5% discount for BIS
Cl.11 of 302-2-35:2017(Heating : Temperature rise of test corner)	-	1500	5% discount for BIS
Cl.11 of 302-2-35:2017(Heating : Insulation of supply cord)	-	1500	5% discount for BIS
Cl.11 of 302-2-35:2017(Heating : room temperature)	-	1500	5% discount for BIS
Cl.10 of IS 302-2- 35:2017(Power Input & Current )	-	1500	5% discount for BIS
Cl.8 of IS 302-2-35:2017(Protection Against Access To Live Parts)	-	100	5% discount for BIS
Cl.7.1 of IS 302-1:2008(Marking : Rated Voltage)	-	100	5% discount for BIS
Cl.7.1 of IS 302-1:2008(Marking : Nature of supply)	-	100	5% discount for BIS
Cl.7.1 of IS 302-1:2008(Marking : Rated power input)	-	100	5% discount for BIS
Cl.7.1 of IS 302-1:2008(Marking : Manufacture identification)	-	100	5% discount for BIS
Cl.7.1 of IS 302-1:2008(Marking : Molel or type)	-	100	5% discount for BIS
Cl.7.1 of IS 302-1:2008(Marking : Symbol for class II)	-	100	5% discount for BIS
Cl.7.1 of IS 302-1:2008(Marking : IP number )	-	100	5% discount for BIS
Cl.7.1 of IS 302-1:2008(Marking : Country of manufacture)	-	100	5% discount for BIS
Cl.7.1 of IS 302-2-35:2017(Marking : rated pressure)	-	100	5% discount for BIS
Cl.7.6 of IS 302-1:2008(Marking : Symbols)	-	100	5% discount for BIS
Cl.7.8 of IS 302-1:2008(Marking : Terminal for connection )	-	100	5% discount for BIS
Cl.7.10 & 7.11 of IS 302-1:2008(Marking : Indication for direction of control)	-	100	5% discount for BIS
Cl.7.13 of IS 302-1:2008(Marking : Language)	-	100	5% discount for BIS
Cl.7.14 of IS 302-1:2008(Marking ; Legibility and durability)	-	100	5% discount for BIS
Cl.7.15 of IS 302-1:2008(Marking : Position of marking)	-	100	5% discount for BIS
Cl.7.101 of IS 302-2-35:2017(Marking : Woter inlet and outlet idetification)	-	100	5% discount for BIS
Cl.7.102 of IS 302-2-35:2017(Marking : Standard mark)	-	100	5% discount for BIS
Cl.21.1 of IS 302-2-35-2011(Mechanical strength)	-	100	5% discount for BIS
Cl. 21.2 of IS 302-1:2008(Mechanical strength)	-	100	5% discount for BIS

Complete

31 Dec, 2023

IS 2993 (1998)

A.C. motor capacitors (Second Revision)

425000 View breakup
Type Test (Class B): Rs.4,15,000/-¬, Type Test (Class C): Rs.4,00,000/-, Type Test (Class D): Rs.3,80,000/- (5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
2.5(Tangent of loss angle)	-	5000	5% discount for BIS
2.6(Visual Examination)	-	500	5% discount for BIS
2.7(Voltage test between terminals)	-	2500	5% discount for BIS
2.8(Voltage test between terminals and case)	-	3000	5% discount for BIS
2.9(Capacitance measurement)	-	5000	5% discount for BIS
2.11.1(Robustness of terminations)	-	150	5% discount for BIS
2.11.1.1(Tensile)	-	150	5% discount for BIS
2.11.1.2(Bending (half cf the terminations))	-	150	5% discount for BIS
2.11 .1.3(Torsion (other half of the terminations))	-	150	5% discount for BIS
2.11.1.4(Torque (screw terminals))	-	150	5% discount for BIS
2.11.1.5(Visual Examination)	-	150	5% discount for BIS
2.11.2(Soldering)	-	150	5% discount for BIS
2.11.3(Vibration)	-	800	5% discount for BIS
2.11.4(fixing bolt or stud (if fitted))	-	150	5% discount for BIS
2.12(Sealing Test)	-	4500	5% discount for BIS
2.13(Endurance test)	-	37000	5% discount for BIS
2.13.1(Endurance test :Testing in air with forced circulation)	-	300000	5% discount for BIS
2.13.3(Endurance test : Conditions of compliance)	-	6000	5% discount for BIS
2.14(Damping heat test)	-	40000	5% discount for BIS
2.15(Self-healing test (if applicable))	-	12000	5% discount for BIS
2.16.3(Destruction test : Test procedure)	-	400	5% discount for BIS
2.16.3.1(Destruction test : Test procedure - Preparation and pre-conditioning )	-	400	5% discount for BIS
2.16.3.2(Destruction test : Test procedure : DC conditioning)	-	400	5% discount for BIS
2.16.3.3(Destruction test : Test procedure : AC destruction test)	-	400	5% discount for BIS
2.16.4(Destruction tes: Evaluation of the failure )	-	400	5% discount for BIS
5.1(Check marking)	-	500	5% discount for BIS
2.1(Check of dimensions)	-	500	5% discount for BIS
2.10(Check of dimensions)	-	500	5% discount for BIS
4.1(Creepage distances and clearances)	-	700	5% discount for BIS
4.2(Terminals and connecting cables)	-	500	5% discount for BIS
4.3(Earth connections)	-	500	5% discount for BIS
4.4(Discharge devices)	-	800	5% discount for BIS

Complete

31 Dec, 2023

REVISED TESTING CHARGES W.E.F. 5-7-2021. For Rated voltage upto and including 660V

IS 15063 (2001)

Alkaline manganese dioxide cells - Specification

For LR03(AAA), LR6(AA), LR14(C), LR20(D), 6LR61(9V)

46250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4(Designation )	-	500	5% discount for BIS
5(Dimensions)	-	1000	5% discount for BIS
6(Materials and Construction)	-	500	5% discount for BIS
7(Battery Connections)	-	750	5% discount for BIS
8(Terminals)	-	500	5% discount for BIS
9(Marking)	-	500	5% discount for BIS
10.1(General)	-	0	5% discount for BIS
10.2.3(Standard Atmospheric Condition of Testing)	-	0	5% discount for BIS
11, 11.1, 11.2(Continuous Discharge Initial Life Test)	-	12500	5% discount for BIS
11, 11.1, 11.3(Intermittent Discharge Initial Application Test (Table 5A, LR03))	-	12500	5% discount for BIS
11, 11.1, 11.3(Intermittent Discharge Initial Application Test (Table 5B, LR6))	-	12500	5% discount for BIS
11, 11.1, 11.3(Intermittent Discharge Initial Application Test (Table 5C, LR14))	-	12500	5% discount for BIS
11, 11.1, 11.3(Intermittent Discharge Initial Application Test (Table 5D, LR20))	-	12500	5% discount for BIS
11, 11.1, 11.3(Intermittent Discharge Initial Application Test (Table 5E, 6LR61))	-	12500	5% discount for BIS
12(Leakage Test)	-	17500	5% discount for BIS
13(Delayed Life Test)	-	12500	5% discount for BIS
10.2.2(Discharge Resistance)	-	0	5% discount for BIS
Cl-10.2.2(Discharge Resistance)	-	0	5% discount for BIS

Complete

31 Dec, 2023

IS 15111 : PART 1 AND PART 2 (2002)

Self ballasted lamps for general lighting services: Part 1 safety requirements

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.1(Marking)	-	50	5% discount for BIS
6.2(Marking)	-	50	5% discount for BIS
6.3(Marking)	-	50	5% discount for BIS
6.4(BIS Certification Marking)	-	50	5% discount for BIS
7(Interchangeability )	-	100	5% discount for BIS
8(Protection against electric shock)	-	100	5% discount for BIS
9.1(INSULATION RESISTANCE AND ELECTRIC STRENGTH After HUMIDIT’Y TREATMENT)	-	1000	5% discount for BIS
9.2(Insulation Resistance)	-	1000	5% discount for BIS
9.2(The insulation resistance of B 22 caps between shell and contact shall be not less than 5 MΩ When measure with a 500 voltage DC.)	-	1000	5% discount for BIS
9.3(Electric Strength)	-	1000	5% discount for BIS
10(Mechanical strength test )	-	1250	5% discount for BIS
11(Cap Temperature rise test )	-	2800	5% discount for BIS
12(Resistance to heat)	-	1800	5% discount for BIS
13(Resistance to Flame and Ignition)	-	1800	5% discount for BIS
14(Fault Conditions)	-	1800	5% discount for BIS
15(Mercury Content )	-	1800	5% discount for BIS

Complete

31 Dec, 2023

REVISED TESTING CHARGES W.E.F. 5-7-2021. Restricted to cap type B22d, E14 & E27 only Excluding:15: Mercury content

IS 15111 : Part 2 (2002)

Self ballasted lamps for general lighting services: Part 2 performance requirements

Self Ballasted lamps for general lighting services

35000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(DIMENSIONS)	-	300	5% discount for BIS
8.1(STARTING AND RUN-UP)	-	3000	5% discount for BIS
8.2(STARTING AND RUN-UP)	-	3000	5% discount for BIS
9(Lamp Wattage)	-	1000	5% discount for BIS
10(Luminous Flux)	-	1000	5% discount for BIS
11(Colour)	-	1000	5% discount for BIS
12(LUMEN MAINTENANCE)	-	4000	5% discount for BIS
13.1(Life)	-	10000	5% discount for BIS
13.2(Life)	-	10000	5% discount for BIS
14(Harmonics)	-	2000	5% discount for BIS
15(Lamp Efficacy)	-	5800	5% discount for BIS
16(Power factor)	-	6000	5% discount for BIS
18.1(Marking)	-	500	5% discount for BIS
18.2(BIS Cirtification Marking)	-	500	5% discount for BIS

Complete

31 Dec, 2023

IS 418 (2004)

Tungsten filament lamps for domestic and similar general lighting purposes (Fourth Revision)

120000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking, IS 418)	-	500	5% discount for BIS
7.1(Lamp Dimensions, IS 418:2004)	-	250	5% discount for BIS
7.2(Lamp Dimensions, IS 418:2004)	-	250	5% discount for BIS
8.1(Wattage, IS 418)	-	1000	5% discount for BIS
8.2.1(Luminous Flux Initial, IS 418)	-	5000	5% discount for BIS
8.2.2(Luminous Flux Initial, IS 418)	-	5000	5% discount for BIS
9(Lumen Maintenance, IS 418)	-	20000	5% discount for BIS
10.1(Life Test Requirements, IS 418)	-	40000	5% discount for BIS
10.2(Life Test Requirements, IS 418)	-	40000	5% discount for BIS
6(Marking, IS 418)	-	500	5% discount for BIS
6(Marking, IS 418)	-	500	5% discount for BIS
6(Marking, IS 418)	-	500	5% discount for BIS
6(Marking, IS 418)	-	500	5% discount for BIS
6(Marking, IS 418)	-	500	5% discount for BIS
6(Marking- IS 302-1)	-	500	5% discount for BIS

Complete

31 Dec, 2023

IS 15518 : Part 1 (2004)

Safety requirements for incandescent lamps: Part 1 tungsten filament lamps for domestic and similar general lighting purposes

25000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
4.2.1(Mandatory Markings)	-	100	5% discount to BIS
4.2.2(Standard Mark)	-	100	5% discount to BIS
4.2.3(Dichroic Reflectorized (Cool Beam) Lamps and Bowl Mirror Lamps)	-	100	5% discount to BIS
4.2.4(Lamps with Operating Positions Limitations)	-	100	5% discount to BIS
4.3, Table 1(Lamp Cap)	-	800	5% discount to BIS
4.3, Table 1(Gauge)	-	800	5% discount to BIS
4.3.1(E14 Capped Lamps)	-	800	5% discount to BIS
4.4.1(Average Cap Temperature Rise)	-	5000	5% discount to BIS
4.4.2(Compliance)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(Group Number)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(Wattage (Note 1))	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(Bulb Shape)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, B15d)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, B22d)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, E12)	-	5000	5% discount to BIS
4.4.1, 4.4.2, Table 2(t3, E27)	-	5000	5% discount to BIS
4.4.3(Batch Testing)	-	5000	5% discount to BIS
4.5.1(Resistance to Torque, Caps)	-	1000	5% discount to BIS
4.5.2(Resistance to Torque, Unused Lamps)	-	1000	5% discount to BIS
4.5.2, Table 3(Cap type)	-	1000	5% discount to BIS
4.5.2, Table 3(Torque Value)	-	1000	5% discount to BIS
4.5.3(Resistance to Heat)	-	1000	5% discount to BIS
4.5.3, Table 4(Cap type)	-	1000	5% discount to BIS
4.5.3, Table 4(Torque Value)	-	1000	5% discount to BIS
4.5.4(Heating Treatment Temperatures)	-	1000	5% discount to BIS
4.6(Insulation Resistance of B15d, B22d and E27/51 × 39 Capped Lamps and Other Lamps having Insulated Skirts)	-	1000	5% discount to BIS
4.7.1(Metal Parts Intended to be Insulated from Live Parts)	-	1100	5% discount to BIS
4.7.2(Bayonet Caps)	-	1100	5% discount to BIS
4.7.3(Edison Screw Caps)	-	1100	5% discount to BIS
4.8(Creepage Distances for B15d and B22d Capped Lamps)	-	500	5% discount to BIS
4.9(Safety at End of Life)	-	10000	5% discount to BIS
4.10, Table 5(Lamp Cap)	-	1000	5% discount to BIS
4.10, Table 5(Cap Dimensions to be Checked by the Gauges)	-	1000	5% discount to BIS
4.10, Table 5(Data Sheet)	-	1000	5% discount to BIS
4.1(Interchangeability)	-	1000	5% discount to BIS

Complete

31 Dec, 2023

REVISED TESTING CHARGES W.E.F. 5-7-2021. Included w.e.f 29-07-2020

IS 2215 (2006)

Starters for fluorescent lamps (Third Revision)

20000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Marking)	-	100	5% discount for BIS
7.3(Protection Against Accidental Electric Shocks)	-	100	5% discount for BIS
7.4(Insulation Resistance under Humidity Conditions)	-	2000	5% discount for BIS
7.5(Dielectric Strength)	-	500	5% discount for BIS
7.6(Dimensions)	-	500	5% discount for BIS
7.7(Torsion Test)	-	500	5% discount for BIS
7.8(Mechanical Strength)	-	500	5% discount for BIS
7.9(Connections)	-	500	5% discount for BIS
7.1(Resistance to Heat and Fire)	-	500	5% discount for BIS
7.11(Quality of Marking)	-	200	5% discount for BIS
7.12(Radio Interference Suppression Capacitors)	-	3300	5% discount for BIS
7.13(Heating of Starters with operating time limitation)	-	5000	5% discount for BIS
8(Starting Test)	-	1800	5% discount for BIS
9(Endurance Test)	-	3500	5% discount for BIS
10(Deactivated Lamp Test)	-	500	5% discount for BIS
11(Information for Ballast Design)	-	500	5% discount for BIS

Complete

31 Dec, 2023

REVISED TESTING CHARGES W.E.F. 5-7-2021. For Two pin glow starters for pre heat type fluorescent lamps of rating 4W to 65W

IS 302 : Part 2 : Sec 3 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision)

3250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	100	5% discount for BIS
7.1(Marking- IS 302-1)	-	100	5% discount for BIS
7.3(Marking- IS 302-1)	-	100	5% discount for BIS
7.4(Marking- IS 302-1)	-	100	5% discount for BIS
7.6(Marking- IS 302-1)	-	100	5% discount for BIS
7.7(Marking- IS 302-1)	-	100	5% discount for BIS
7.8(Marking- IS 302-1)	-	100	5% discount for BIS
7.11(Marking- IS 302-1)	-	100	5% discount for BIS
7.12(Marking- IS 302-1)	-	100	5% discount for BIS
7.13(Marking- IS 302-1)	-	100	5% discount for BIS
7.14(Marking- IS 302-1)	-	100	5% discount for BIS
7.15(Marking- IS 302-1)	-	100	5% discount for BIS
7.101(Marking)	-	100	5% discount for BIS
8( Protection Against Electric Shock, IS 302-1)	-	100	5% discount for BIS
10(Power Input and Current, IS 302-1)	-	100	5% discount for BIS
11(Heating, IS 302-1)	-	400	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	100	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	100	5% discount for BIS
14(Transient Over Voltages, IS 302-1)	-	100	5% discount for BIS
15.1(Moisture Resistance, IS 302-1)	-	250	5% discount for BIS
15.2(Moisture Resistance, IS 302-1)	-	250	5% discount for BIS
15.3(Moisture Resistance, IS 302-1)	-	250	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	100	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	100	5% discount for BIS
19.4(Abnormal Operation, IS 302-1)	-	200	5% discount for BIS
19.5(Abnormal Operation, IS 302-1)	-	200	5% discount for BIS
19.7(Abnormal Operation)	-	200	5% discount for BIS
19.9(Abnormal Operation)	-	200	5% discount for BIS
19.1(Abnormal Operation)	-	200	5% discount for BIS
19.101(Abnormal Operation)	-	200	5% discount for BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	100	5% discount for BIS
20.2(Stability & Mechanical Hazards, IS 302-1)	-	100	5% discount for BIS
21.1(Mechanical Strength, IS 302-1)	-	100	5% discount for BIS
21.2(Mechanical Strength, IS 302-1)	-	100	5% discount for BIS
21.101(Mechanical Strength, IS 302-2-3)	-	100	5% discount for BIS
22(Construction, IS 302-1)	-	500	5% discount for BIS
22.101(Construction)	-	500	5% discount for BIS
22.102(Construction)	-	500	5% discount for BIS
22.103(Construction)	-	500	5% discount for BIS
22.104(Construction)	-	500	5% discount for BIS
22.105(Construction)	-	500	5% discount for BIS
22.106(Construction)	-	500	5% discount for BIS
22.107(Construction)	-	500	5% discount for BIS
23.1(Internal Wiring, IS 302-1)	-	100	5% discount for BIS
23.2(Internal Wiring, IS 302-1)	-	100	5% discount for BIS
23.3(Internal Wiring, IS 302-1)	-	100	5% discount for BIS
23.4(Internal Wiring, IS 302-1)	-	100	5% discount for BIS
23.5(Internal Wiring, IS 302-1)	-	100	5% discount for BIS
23.6(Internal Wiring, IS 302-1)	-	100	5% discount for BIS
23.7(Internal Wiring, IS 302-1)	-	100	5% discount for BIS
23.8(Internal Wiring, IS 302-1)	-	100	5% discount for BIS
23.9(Internal Wiring, IS 302-1)	-	100	5% discount for BIS
23.10(Internal Wiring, IS 302-1)	-	100	5% discount for BIS
24.1(Components, IS 302-1)	-	100	5% discount for BIS
24.2(Components, IS 302-1)	-	100	5% discount for BIS
24.4(Components, IS 302-1)	-	100	5% discount for BIS
24.5(Components, IS 302-1)	-	100	5% discount for BIS
24.6(Components, IS 302-1)	-	100	5% discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
26(Terminals for External Conductors, IS 302-1)	-	100	5% discount for BIS
27.1(Provision for Earthing, IS 302-1)	-	100	5% discount for BIS
27.2(Provision for Earthing, IS 302-1)	-	100	5% discount for BIS
27.3(Provision for Earthing, IS 302-1)	-	100	5% discount for BIS
27.4(Provision for Earthing, IS 302-1)	-	100	5% discount for BIS
27.5(Provision for Earthing, IS 302-1)	-	100	5% discount for BIS
28(Screws & Connections, IS 302-1)	-	100	5% discount for BIS
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	5% discount for BIS
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	100	5% discount for BIS
30.1(Resistance to Heat, Fire & Tracking, IS 302-1)	-	100	5% discount for BIS
30.2(Resistance to Heat, Fire & Tracking, IS 302-1)	-	100	5% discount for BIS
31(Resistance of Rusting, IS 302-1)	-	100	5% discount for BIS
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	100	5% discount for BIS
7.1(Marking- IS 302-1)	-	100	5% discount for BIS
7.1(Marking- IS 302-1)	-	100	5% discount for BIS
7.1(Marking- IS 302-1)	-	100	5% discount for BIS
7.1(Marking- IS 302-1)	-	100	5% discount for BIS
7.1(Marking- IS 302-1)	-	100	5% discount for BIS
7.1(Marking- IS 302-1)	-	100	5% discount for BIS
7.1(Marking- IS 302-1)	-	100	5% discount for BIS
11(Heating, IS 302-1)	-	100	5% discount for BIS
11(Heating, IS 302-1)	-	400	5% discount for BIS
11(Heating, IS 302-1)	-	400	5% discount for BIS
11(Heating, IS 302-1)	-	400	5% discount for BIS
11(Heating, IS 302-1)	-	400	5% discount for BIS
11(Heating, IS 302-1)	-	400	5% discount for BIS
11(Heating, IS 302-1)	-	400	5% discount for BIS
6(Classification- IS 302-1)	-	100	5% discount for BIS
19.4(Abnormal Operation, IS 302-1)	-	200	5% discount for BIS
19.5(Abnormal Operation, IS 302-1)	-	200	5% discount for BIS
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	100	5% discount for BIS
4(General requirement)	-	10	5% discount for BIS
16(Leakage current and electric strength)	-	100	5% discount for BIS
17(Overload protection of transformers and associated circuits)	-	10	5% discount for BIS
17(Overload protection of transformers and associated circuits)	-	10	5% discount for BIS
17(Overload protection of transformers and associated circuits)	-	10	5% discount for BIS
18(Endurance)	-	10	5% discount for BIS
5(GENERAL CONDITIONS FOR THE TESTS)	-	10	5% discount for BIS
19(Abnormal operation)	-	200	5% discount for BIS
25(Supply Connection and External Flexible Cords)	-	100	5% discount for BIS

Complete

31 Dec, 2023

REVISED TESTING CHARGES W.E.F. 5-7-2021. Excluding Cycle test for components (Cl.24)components

IS 302 : Part 2 : Sec 30 (2007)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision)

3250 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 (Classification)	-	50	5% discount for BIS
Cl.7 & IS:302-1:2008(Marking and Instructions)	-	50	5% discount for BIS
Cl.7(Marking and Instructions)	-	50	5% discount for BIS
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Rated Voltage )	-	50	5% discount for BIS
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Nature of supply )	-	50	5% discount for BIS
Cl.7.1 of IS:302-1:2008(Marking and Instructions : rated power input )	-	50	5% discount for BIS
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Name , trade-mark or identification mark of the manufacturer )	-	50	5% discount for BIS
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Model or type )	-	50	5% discount for BIS
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Symbol for Class-II )	-	50	5% discount for BIS
Cl.7.1 of IS:302-1:2008(Marking and Instructions : Country of manufacture )	-	50	5% discount for BIS
Cl 7.1 & Cl.7.6 of IS:302-2:30: 2007(Marking and Instructions : Do not cover )	-	50	5% discount for BIS
Cl.7.3(Marking and Instructions)	-	50	5% discount for BIS
Cl.7.4(Marking and Instructions)	-	50	5% discount for BIS
Cl.7.5(Marking and Instructions)	-	50	5% discount for BIS
Cl.7.5 of IS:302-1:2008(Marking and Instructions : upper of lower limit of the rated power input )	-	50	5% discount for BIS
Cl.7.6 & IS:302-1:2008(Marking and Instructions)	-	50	5% discount for BIS
Cl.7.6 of IS:302-1:2008(Marking and Instructions : Symbols )	-	50	5% discount for BIS
Cl.7.8 of IS :302-1:2008(Marking and Instructions)	-	50	5% discount for BIS
Cl.7.8 of IS :302-1:2008(Marking and Instructions : terminals )	-	50	5% discount for BIS
Cl.7.9 of IS :302-1:2008(Marking and Instructions)	-	50	5% discount for BIS
Cl.7.9 of IS :302-1:2008(Marking and Instructions : switches )	-	50	5% discount for BIS
Cl.7.10 of IS :302-1:2008(Marking and Instructions)	-	50	5% discount for BIS
Cl.7.11 of IS :302-1:2008(Marking and Instructions)	-	50	5% discount for BIS
Cl.7.11 of IS :302-1:2008(Marking and Instructions : Controls )	-	50	5% discount for BIS
Cl.7.12 & IS:302-1:2008(Marking and Instructions)	-	50	5% discount for BIS
Cl.7.12.1 & IS:302-1:2008(Marking and Instructions)	-	50	5% discount for BIS
Cl.7.13 of IS 302-1:2008(Marking and Instructions)	-	50	5% discount for BIS
Cl.7.13 of IS 302-1:2008(Marking and Instructions : Languge of instruction and texts )	-	50	5% discount for BIS
Cl.7.14 of IS302-1:2008(Marking and Instructions)	-	50	5% discount for BIS
Cl.7.14(Marking and Instructions)	-	50	5% discount for BIS
Cl.7.14 of IS302-1:2008(Marking and Instructions : Legibility and durability )	-	50	5% discount for BIS
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : height of symbol)	-	50	5% discount for BIS
Cl.7.14 of IS:302-2:30: 2007(Marking and Instructions : Height of “Do not cover”)	-	50	5% discount for BIS
Cl.7.15 of IS 302-1:2008(Marking and Instructions)	-	50	5% discount for BIS
Cl.7.15 of IS 302-1:2008(Marking and Instructions : discernibility from the out side )	-	50	5% discount for BIS
Cl.7.15 of IS 302-1:2008(Marking and Instructions : Visibility of marking concerning covering)	-	50	5% discount for BIS
Cl.7.101(Marking and Instructions)	-	50	5% discount for BIS
Cl.7.101 of IS:302-2:30: 2007(Marking and Instructions : standard mark. )	-	50	5% discount for BIS
Cl.8 & IS:302-1:2008(Protection Against Access to Live Parts)	-	100	5% discount for BIS
Cl.10 & IS:302-1:2008(Power Input and Current)	-	100	5% discount for BIS
Cl.11 & IS:302-1:2008(Heating)	-	200	5% discount for BIS
Cl.11 of IS:302-2:30: 2007(Heating : Room temperature)	-	200	5% discount for BIS
Cl.11 of IS:302-2:30: 2007(Heating : Temperature rise in winding)	-	200	5% discount for BIS
Cl.11 of IS:302-2:30: 2007(Heating : Air-outlet grills)	-	200	5% discount for BIS
Cl.11 of IS:302-2:30: 2007(Heating : Surfaces of handles, knobs, grips and similar parts)	-	200	5% discount for BIS
Cl.11 of IS:302-2:30: 2007(Heating : Wooden supports, walls, ceiling and floor of the test corner)	-	200	5% discount for BIS
Cl.11 of IS:302-2:30: 2007(Heating : PVC Insulation )	-	200	5% discount for BIS
Cl.11.8(Heating)	-	200	5% discount for BIS
Cl.11.8 of IS:302-2:30: 2007(Heating : For liquid filled radiators the temp. rise of the outer surface of the liquid container)	-	200	5% discount for BIS
Cl.13 & IS:302-1:2008(Leakage Current & Electric Strength at operating temp. )	-	200	5% discount for BIS
Cl.13 of IS:302-1:2008(Leakage Current of Electric Strength at operating temp. )	-	200	5% discount for BIS
Cl.14 & IS:302-1:2008(Transient Over Voltages)	-	200	5% discount for BIS
Cl.14 of IS:302-1:2008(Transient Over Voltages)	-	200	5% discount for BIS
Cl.15 & IS: 302-1:2008(Moisture Resistance )	-	500	5% discount for BIS
Cl.15 of IS 302-1:2008(Moisture Resistance )	-	500	5% discount for BIS
Cl.16 & IS:302-1:2008(Leakage Current & Electric Strength )	-	200	5% discount for BIS
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Electric Strentgh )	-	200	5% discount for BIS
Cl.16 of IS:302-1:2008(Leakage current and Electric strength (After humidity): Leakage current )	-	200	5% discount for BIS
Cl.17 & IS:302-1:2008(Over load Protection of Transformers and Associated Circuits )	-	100	5% discount for BIS
Cl.18 (Endurance. )	-	10	5% discount for BIS
Cl.19 & IS:302-1:2008(Abnormal Operation.)	-	450	5% discount for BIS
Cl.19 of IS:302-1:2008(Abnormal Operation : Emission of molten or poisonous or ignitable gas)	-	450	5% discount for BIS
Cl.19 of IS:302-2-30:2007(Abnormal Operation : Temp rise of test corner )	-	450	5% discount for BIS
Cl.19 of IS:302-2-30:2007(Abnormal Operation : temp rise of supply cord )	-	450	5% discount for BIS
Cl.19 of IS:302-2-30:2007(Abnormal Operation : High Voltage )	-	450	5% discount for BIS
Cl.19.103 , Cl 19.104 of IS:302-2-30:2007(Abnormal Operation : Operation after Covering by cotton)	-	450	5% discount for BIS
Cl.19.106 of IS:302-2-30:2007(Abnormal Operation : Locked rotor of fan hetear )	-	450	5% discount for BIS
Cl.19.109 of IS:302-2-30:2007(Abnormal Operation : operation against wall for fan heater )	-	450	5% discount for BIS
Cl.19.110 of IS:302-2-30:2007(Abnormal Operation : operation against wall for visibly glowing radiant heaters )	-	450	5% discount for BIS
Cl.19.111 of IS:302-2-30:2007(Abnormal Operation : Ignition of flannelette for Visibly glowing heaters)	-	450	5% discount for BIS
Cl.19.112 of IS:302-2-30:2007(Abnormal Operation : Ignition of bleached cotton gauge)	-	450	5% discount for BIS
Cl.19.114 of IS:302-2-30:2007(Abnormal Operation : the temp. of the surface of the container for oil heaters )	-	450	5% discount for BIS
Cl.19.101(Abnormal Operation.)	-	450	5% discount for BIS
Cl.19.102(Abnormal Operation.)	-	450	5% discount for BIS
Cl.19.103(Abnormal Operation.)	-	450	5% discount for BIS
Cl.19.104(Abnormal Operation.)	-	450	5% discount for BIS
Cl.19.105(Abnormal Operation.)	-	450	5% discount for BIS
Cl.19.106(Abnormal Operation.)	-	450	5% discount for BIS
Cl.19.107(Abnormal Operation.)	-	450	5% discount for BIS
Cl.19.108(Abnormal Operation.)	-	450	5% discount for BIS
Cl.19.109(Abnormal Operation.)	-	450	5% discount for BIS
Cl.19.110(Abnormal Operation.)	-	450	5% discount for BIS
Cl.19.111(Abnormal Operation.)	-	450	5% discount for BIS
Cl.19.112(Abnormal Operation.)	-	450	5% discount for BIS
Cl.19.113(Abnormal Operation.)	-	450	5% discount for BIS
Cl.19.114(Abnormal Operation.)	-	450	5% discount for BIS
Cl.20 & IS:302-1:2008(Stability & Mechanical Hazards)	-	100	5% discount for BIS
Cl.20 of IS:302-2-30:2007(Stability of Mechanical Hazards)	-	100	5% discount for BIS
Cl.21 & IS:302-1:2008)(Mechanical Strength.)	-	100	5% discount for BIS
Cl.21.1 of IS:302-1:2008)(Mechanical Strength : Rough handling )	-	100	5% discount for BIS
Cl.21.2 of IS 302-1:2008(Mechanical Strength : Pentration by sharp implementation )	-	100	5% discount for BIS
Cl.21.2 of IS 302-1:2008(Mechanical Strength.)	-	100	5% discount for BIS
Cl.21.101 of IS:302-2-30:2007(Mechanical Strength : fire gaurd deformation test )	-	100	5% discount for BIS
Cl.21.101 (Mechanical Strength.)	-	100	5% discount for BIS
Cl.21.102(Mechanical Strength.)	-	100	5% discount for BIS
Cl.21.103(Mechanical Strength.)	-	100	5% discount for BIS
Cl.22.1 of IS 302-1:2008(Construction)	-	100	5% discount for BIS
Cl.22.5 of IS 302-1:2008(Construction)	-	100	5% discount for BIS
Cl.22.6 of IS 302-1:2008(Construction)	-	100	5% discount for BIS
Cl.22.7 of IS 302-1:2008(Construction)	-	100	5% discount for BIS
Cl.22.8 of IS 302-1:2008(Construction)	-	100	5% discount for BIS
Cl.22.9 of IS 302-1:2008(Construction)	-	100	5% discount for BIS
Cl.22.11(Construction)	-	100	5% discount for BIS
Cl.22.12 of IS 302-1:2008(Construction)	-	100	5% discount for BIS
Cl.22.13 of IS 302-1:2008(Construction)	-	100	5% discount for BIS
Cl.22.14 of IS 302-1:2008(Construction)	-	100	5% discount for BIS
Cl.22.15 of IS 302-1:2008(Construction)	-	100	5% discount for BIS
Cl.22.18 of IS 302-1:2008(Construction)	-	100	5% discount for BIS
Cl.22.20 of IS 302-1:2008(Construction)	-	100	5% discount for BIS
Cl.22.21 of IS 302-1:2008(Construction)	-	100	5% discount for BIS
Cl.22.11 of IS 302-1:2008(Construction : Fixing of non detachable parts )	-	100	5% discount for BIS
Cl.22.12 of IS 302-1:2008(Construction : Fixing of Handle, knobs,grips,lever and similer parts )	-	100	5% discount for BIS
Cl.22.13 of IS 302-1:2008(Construction : Position of handles )	-	100	5% discount for BIS
Cl.22.14 of IS 302-1:2008(Construction : ragged and sharp edges)	-	100	5% discount for BIS
Cl.22.15 of IS 302-1:2008(Construction : Storage hooks for flexible cords)	-	100	5% discount for BIS
Cl.22.18 of IS 302-1:2008(Construction : Resistance to corrosion )	-	100	5% discount for BIS
Cl.22.7 of IS:302-2-30:2007(Construction : Pressure test of oil heater )	-	100	5% discount for BIS
Cl.22.24 of IS:302-2-30:2007(Construction : test of bare heating element)	-	100	5% discount for BIS
Cl.22.101 of IS:302-2-30:2007(Construction : Prevention to contact with heating element)	-	100	5% discount for BIS
Cl.22.102 & Cl 22.103 of IS:302-2-30:2007(Construction : Fireguard )	-	100	5% discount for BIS
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of openings on the underside)	-	100	5% discount for BIS
Cl.22.106 of IS:302-2-30:2007(Construction : Checking of thermostats, timers or similar means for visibl glowing radiant heaters)	-	100	5% discount for BIS
Cl.23 & IS:302-1:2008(Internal Wiring )	-	100	5% discount for BIS
Cl.23.5 of 302-1:2008(Internal Wiring )	-	100	5% discount for BIS
Cl.23.7 of 302-1:2008(Internal Wiring )	-	100	5% discount for BIS
Cl.23 of IS:302-1:2008(Internal Wiring )	-	100	5% discount for BIS
Cl.23.7 of 302-1:2008(Internal Wiring : Colour of earting conductor )	-	100	5% discount for BIS
Cl.24 of IS:302-2-30:2007(Component)	-	100	5% discount for BIS
Cl.24.1 of 302-1:2008(Component)	-	100	5% discount for BIS
C.24.2 of 302-1:2008(Component)	-	100	5% discount for BIS
Cl.24.1.3 (Component)	-	100	5% discount for BIS
C.24.1.4(Component)	-	100	5% discount for BIS
Cl.25.1 of 302-1:2008(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl. 25.2 of IS 3021:2008(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl. 25.3 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl. 25.4 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl.25.5 of 302-1:2008(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl.25.6 of 302-1:2008(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl.25.8 of 302-1:2008(Supply Connection and External Flexible Cords : Resistance of supply wires )	-	100	5% discount for BIS
Cl. 25.9 of 302-1:2008(Supply Connection and External Flexible Cords : Contact with sharp edge )	-	100	5% discount for BIS
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl.25.10 of 302-1:2008(Supply Connection and External Flexible Cords : Colour of earthing wire )	-	100	5% discount for BIS
Cl. 25.12 of 302-1:2008(Supply Connection and External Flexible Cords : Moulding of cords )	-	100	5% discount for BIS
Cl. 25.13 of 302-1:2008(Supply Connection and External Flexible Cords : Inlet opening of supply cords )	-	100	5% discount for BIS
Cl.25.14 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - strain at terminals )	-	100	5% discount for BIS
Cl.25.15 of IS 302-1:2008(Supply Connection and External Flexible Cords : Cord grip test - displacement)	-	100	5% discount for BIS
Cl.25.17 of IS 302-1:2008(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl.25.18 of 302-1:2008(Supply Connection and External Flexible Cords : Arrangement of cord anchorages )	-	100	5% discount for BIS
Cl.25.20 of 302-1:2008(Supply Connection and External Flexible Cords : Additional insulation )	-	100	5% discount for BIS
Cl.25.7.(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl.25.7 of IS:302-2-30:2007(Supply Connection and External Flexible Cords : Supply cords material )	-	100	5% discount for BIS
Cl.25.8(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl. 25.9(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl. 25.11(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl. 25.12(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl. 25.13(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl.25.18(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl.25.20(Supply Connection and External Flexible Cords )	-	100	5% discount for BIS
Cl.26 of IS 302-1:2008(Terminal for External Conductors )	-	100	5% discount for BIS
Cl.26.1 of IS 302-1:2008(Terminal for External Conductors )	-	100	5% discount for BIS
Cl.26.10 of IS 302-1:2008(Terminal for External Conductors )	-	100	5% discount for BIS
Cl.26.11 of IS 302-1:2008(Terminal for External Conductors )	-	100	5% discount for BIS
Cl.27.1 of 302-1:2008(Provision for Earthing.)	-	100	5% discount for BIS
Cl.27.5 of 302-1:2008(Provision for Earthing.)	-	100	5% discount for BIS
Cl.28 of 302-1:2008(Screws and Connections.)	-	100	5% discount for BIS
Cl.29 & IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation)	-	100	5% discount for BIS
Cl.29.1 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Clearance )	-	100	5% discount for BIS
Cl.29.2 of IS:302-1:2008(Clearances, Creepage Distances and Solid Insulation : Creepage Distance)	-	100	5% discount for BIS
Cl.30 & IS:302-1:2008(Resistance to Heat and Fire)	-	100	5% discount for BIS
Cl.30.1 of IS:302-1:2008(Resistance to Heat and Fire: Resistance to heat. )	-	100	5% discount for BIS
Cl.30.2 of 302-1:2008(Resistance to Heat and Fire : Resistance to fire)	-	100	5% discount for BIS
Cl.30.2.2 of 302-1:2008(Resistance to Heat and Fire)	-	100	5% discount for BIS
Cl.31 & IS:302-1:2008(Resistance to Rusting.)	-	100	5% discount for BIS
Cl.31 of IS:302-1:2008(Resistance to Rusting.)	-	100	5% discount for BIS
Cl.32 & IS:302-1:2008(Radition,Toxicity and similar Hazards.)	-	100	5% discount for BIS

Complete

31 Dec, 2023

REVISED TESTING CHARGES W.E.F. 5-7-2021. IP Test included w.e.f. 27.02.2019. EXCLUSIONS: EMI/EMC tests (Electrostatic discharges, radiant fields, fast transient bursts, voltage surges, injected current, voltage dip and interruption, mains signals) (Cl.19.11.4.1 to 19.11.4.7), Components (Capacitors for radio interference suppression, isolating transformer, coupler) (Cl.24.1.1, 24.1.2, 24.1.5)

IS 302 : Part 2 : Sec 201 (2008)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision)

7500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl.6 of IS 302-‐2-‐201:2008(Classification)	-	100	5% discount for BIS
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	5% discount for BIS
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	5% discount for BIS
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	5% discount for BIS
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	5% discount for BIS
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	5% discount for BIS
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	5% discount for BIS
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	5% discount for BIS
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	5% discount for BIS
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	5% discount for BIS
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	5% discount for BIS
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	5% discount for BIS
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	5% discount for BIS
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	5% discount for BIS
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	5% discount for BIS
Cl.7 of IS 302-2-201:2008(Marking and Instruction )	-	100	5% discount for BIS
Cl.8 of IS 302‐2-201: 2008(Protection Against Access to Live Parts)	-	150	5% discount for BIS
Cl.10 of IS 302‐2‐201:2008(Power Input and Current )	-	200	5% discount for BIS
Cl.11 of IS 302-2201: 2008(Heating)	-	300	5% discount for BIS
Cl.13 of IS 302-2-201: 2008(Leakage Current & Electric Strength at Operating Temperature)	-	500	5% discount for BIS
Cl.14 of IS 302‐2-201:2008(Transient Over Voltages )	-	500	5% discount for BIS
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	400	5% discount for BIS
Cl.15 of IS 302-2-201:2008(Moisture Resistance )	-	400	5% discount for BIS
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	350	5% discount for BIS
Cl.16 of IS 302-2-201:2008(Leakage Current & Electric Strength)	-	350	5% discount for BIS
Cl.17 of IS 302‐2-201: 2008(Overload Protection of Transformers & Associated Circuits)	-	300	5% discount for BIS
Cl.19 of IS 302‐2-201: 2008(Abnormal Operation )	-	500	5% discount for BIS
Cl.20 of IS 302-2-201: 2008(Stability & Mechanical Hazards)	-	400	5% discount for BIS
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	500	5% discount for BIS
Cl.22 of IS 302-2-201: 2008(Construction)	-	400	5% discount for BIS
Cl.21 of IS 302-2-201: 2008(Mechanical Strength )	-	500	5% discount for BIS
Cl.23 of 302-2-201:2008(Internal Wiring )	-	350	5% discount for BIS
Cl.24 of IS 302-2-201: 2008(Component)	-	200	5% discount for BIS
Cl.24 of IS 302-2-201: 2008(Component)	-	200	5% discount for BIS
Cl.26 of IS 302-2-201: 2008(Terminals for External Conductors)	-	200	5% discount for BIS
Cl.27 of IS 302-2-201: 2008(Provision for Earthing )	-	200	5% discount for BIS
Cl.28 of IS 302-2-201: 2008(Screws & Connections )	-	200	5% discount for BIS
Cl.29 of IS 302-2‐201:2008(Clearances, Creepage Distances and Solid Insulation )	-	200	5% discount for BIS
Cl.30 of IS 302-2‐201:2008(Resistance to Heat and Fire )	-	300	5% discount for BIS
Cl.31 of IS 302-2-201:2008(Resistance of Rusting )	-	300	5% discount for BIS
Cl.32 of IS 302-2-201:2008(Radiation, Toxicity and Similar Hazards)	-	200	5% discount for BIS
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	200	5% discount for BIS
Cl.25 of IS 302-2-201: 2008(Supply Connection and External Flexible Cords)	-	200	5% discount for BIS

Complete

31 Dec, 2023

REVISED TESTING CHARGES W.E.F. 5-7-2021. EXCLUSIONS: EMI/EMC tests (Electrostatic discharges, radiant fields, fast transient bursts, voltage surges, injected current, voltage dip and interruption, mains signals) (Cl.19.11.4.1 to 19.11.4.7), Components (Capacitors for radio interference suppression, isolating transformer, coupler) (Cl.24.1.1, 24.1.2, 24.1.5)

IS 302 : Part 1 (2008)

Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
7(Marking and instructions)	-	50	5% discount for BIS
8.1.1(Protection against live parts in all positions)	-	500	5% discount for BIS
8.1.2(Protection against live parts in openings)	-	500	5% discount for BIS
8.1.3(Protection against live parts in visible glowing heating elements)	-	500	5% discount for BIS
8.1.4(Protection against live parts against protective impedance)	-	500	5% discount for BIS
9(Starting of motor operation test requirements and tests)	-	1	5% discount for BIS
10.1(Power input)	-	500	5% discount for BIS
10.2(Current input)	-	500	5% discount for BIS
11.1(General)	-	1000	5% discount for BIS
11.2(General)	-	1000	5% discount for BIS
11.3(Heating)	-	1000	5% discount for BIS
13.1(General)	-	1000	5% discount for BIS
13.2(Leakage current at operating temperature)	-	1000	5% discount for BIS
13.3(Electric Strength at operating temperature)	-	1000	5% discount for BIS
14(Transient Over Voltages)	-	2000	5% discount for BIS
15.0(General)	-	3500	5% discount for BIS
15.1(Ingress Protection test other than IPX0 (IP test))	-	3500	5% discount for BIS
15.2(Spillage Test)	-	3500	5% discount for BIS
15.3(Humidity Test)	-	3500	5% discount for BIS
16.0(General)	-	1000	5% discount for BIS
16.1(General)	-	1000	5% discount for BIS
16.2(Leakage Current (after Clause 15))	-	1000	5% discount for BIS
16.3(Electric Strength (after clause 15 and 16.2))	-	1000	5% discount for BIS
17(Over Load Protection of Transformers and associated circuits)	-	2000	5% discount for BIS
18(Endurance Test requirements and tests)	-	2	5% discount for BIS
19(Abnormal Operation)	-	2000	5% discount for BIS
20(Stability test)	-	700	5% discount for BIS
21(Mechanical Strength Test)	-	700	5% discount for BIS
22(Construction verification related test)	-	2000	5% discount for BIS
23(General)	-	500	5% discount for BIS
24(Components)	-	500	5% discount for BIS
25(Supply connection and external flexible cords)	-	500	5% discount for BIS
26(Terminals for external conductors)	-	500	5% discount for BIS
27(Provision for earthing)	-	800	5% discount for BIS
28(Screw test and connections)	-	800	5% discount for BIS
29(clearance, creepage distances and solid insulation)	-	800	5% discount for BIS
30.1(Ball pressure test)	-	1500	5% discount for BIS
30.2(Glow Wire Test)	-	1500	5% discount for BIS
30.2(Needle Flame Test)	-	1500	5% discount for BIS
31(Resistance to Rusting)	-	1000	5% discount for BIS
32(Radiation Toxicity and Similar Hazards)	-	100	5% discount for BIS
4(General requirement)	-	10	5% discount for BIS
16(Leakage current and electric strength)	-	1000	5% discount for BIS
17(Overload protection of transformers and associated circuits)	-	2000	5% discount for BIS
18(Endurance)	-	2	5% discount for BIS
8.1.5(Live parts of built-in appliances)	-	500	5% discount for BIS
11.4(Heating appliances)	-	1000	5% discount for BIS
11.5(Motor-operated appliances)	-	1000	5% discount for BIS
11.6(Combined appliances)	-	1000	5% discount for BIS
11.7(Duration corresponding)	-	1000	5% discount for BIS
11.8(Temperature rise)	-	1000	5% discount for BIS
4(General Requirement)	-	10	5% discount for BIS
5(General conditions for tests)	-	10	5% discount for BIS
6(Classifications)	-	50	5% discount for BIS

Complete

31 Dec, 2023

REVISED TESTING CHARGES W.E.F. 5-7-2021. Upto 5 KW Excluding: EMI/EMC tests (Electrostatic discharges, radiant fields, fast transient bursts, voltage surges, injected current, voltage dip and interruption, mains signals) (Cl.19.11.4.1 to 19.11.4.7), Components (Capacitors for radio interference suppression, isolating transformer, coupler) (Cl.24.1.1, 24.1.2, 24.1.5)

IS 302 : Part 2 : Sec 14 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision)

12500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification- IS 302-1 )	-	50	5% discount for BIS
7.1(Marking- IS 302-1)	-	50	5% discount for BIS
7.3(Marking- IS 302-1)	-	50	5% discount for BIS
7.4(Marking- IS 302-1)	-	50	5% discount for BIS
7.6(Marking- IS 302-1)	-	50	5% discount for BIS
7.7(Marking- IS 302-1)	-	50	5% discount for BIS
7.8(Marking- IS 302-1)	-	50	5% discount for BIS
7.11(Marking- IS 302-1)	-	50	5% discount for BIS
7.12(Marking- IS 302-1)	-	50	5% discount for BIS
7.13(Marking- IS 302-1)	-	50	5% discount for BIS
7.14(Marking- IS 302-1)	-	50	5% discount for BIS
7.15(Marking- IS 302-1)	-	50	5% discount for BIS
7.101(Marking)	-	50	5% discount for BIS
8( Protection Against Electric Shock, IS 302-1)	-	100	5% discount for BIS
10(Power Input and Current, IS 302-1)	-	800	5% discount for BIS
11(Heating, IS 302-1)	-	800	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	5% discount for BIS
13(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	5% discount for BIS
14(Transient Over Voltages, IS 302-1)	-	500	5% discount for BIS
15.1(Moisture Resistance, IS 302-1)	-	1500	5% discount for BIS
15.2(Moisture Resistance, IS 302-1)	-	1500	5% discount for BIS
15(Moisture Resistance, IS 302-1)	-	1500	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: Leakage current, IS 302-1)	-	500	5% discount for BIS
16(Electrical Insulation and Leakage Current at Operating Temperature: High Voltage, IS 302-1)	-	500	5% discount for BIS
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	200	5% discount for BIS
19.1(Abnormal Operation, IS 302-1)	-	1200	5% discount for BIS
19.7(Abnormal Operation, IS 302-1)	-	1200	5% discount for BIS
19.8(Abnormal Operation, IS 302-1)	-	1200	5% discount for BIS
19.9(Abnormal Operation, IS 302-1)	-	1200	5% discount for BIS
19.101(Abnormal Operation)	-	1200	5% discount for BIS
19.102(Abnormal Operation)	-	1200	5% discount for BIS
20.1(Stability & Mechanical Hazards, IS 302-1)	-	900	5% discount for BIS
20.2(Stability & Mechanical Hazards, IS 302-1)	-	900	5% discount for BIS
20.101(Stability & Mechanical Hazards)	-	900	5% discount for BIS
20.102(Stability & Mechanical Hazards)	-	900	5% discount for BIS
20.103(Stability & Mechanical Hazards)	-	900	5% discount for BIS
20.104(Stability & Mechanical Hazards)	-	900	5% discount for BIS
20.105(Stability & Mechanical Hazards)	-	900	5% discount for BIS
20.106(Stability & Mechanical Hazards)	-	900	5% discount for BIS
20.107(Stability & Mechanical Hazards)	-	900	5% discount for BIS
20.108(Stability & Mechanical Hazards)	-	900	5% discount for BIS
20.109(Stability & Mechanical Hazards)	-	900	5% discount for BIS
20.110(Stability & Mechanical Hazards)	-	900	5% discount for BIS
20.111(Stability & Mechanical Hazards)	-	900	5% discount for BIS
20.112(Stability & Mechanical Hazards)	-	900	5% discount for BIS
20.113(Stability & Mechanical Hazards)	-	900	5% discount for BIS
20.114(Stability & Mechanical Hazards)	-	900	5% discount for BIS
20.115(Stability & Mechanical Hazards)	-	900	5% discount for BIS
20.116(Stability & Mechanical Hazards)	-	900	5% discount for BIS
21.1(Mechanical Strength, IS 302-1)	-	800	5% discount for BIS
21.2(Mechanical Strength, IS 302-1)	-	800	5% discount for BIS
22(Construction, IS 302-1)	-	800	5% discount for BIS
22.101(Construction)	-	800	5% discount for BIS
22.102(Construction)	-	800	5% discount for BIS
23.1(Internal Wiring, IS 302-1)	-	700	5% discount for BIS
23.2(Internal Wiring, IS 302-1)	-	700	5% discount for BIS
23.3(Internal Wiring, IS 302-1)	-	700	5% discount for BIS
23.4(Internal Wiring, IS 302-1)	-	700	5% discount for BIS
23.5(Internal Wiring, IS 302-1)	-	700	5% discount for BIS
23.6(Internal Wiring, IS 302-1)	-	700	5% discount for BIS
23.7(Internal Wiring, IS 302-1)	-	700	5% discount for BIS
23.8(Internal Wiring, IS 302-1)	-	700	5% discount for BIS
23.9(Internal Wiring, IS 302-1)	-	700	5% discount for BIS
23.10(Internal Wiring, IS 302-1)	-	700	5% discount for BIS
24.1(Components, IS 302-1)	-	100	5% discount for BIS
24.2(Components, IS 302-1)	-	100	5% discount for BIS
24.5(Components, IS 302-1)	-	100	5% discount for BIS
24.6(Components, IS 302-1)	-	100	5% discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.2(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.5(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.6(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.7(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.8(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.11(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.12(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.13(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.15(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.16(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.17(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.18(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.19(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.21(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.22(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
26(Terminals for External Conductors, IS 302-1)	-	500	5% discount for BIS
27(Provision for Earthing, IS 302-1)	-	500	5% discount for BIS
27.2(Provision for Earthing, IS 302-1)	-	500	5% discount for BIS
27.3(Provision for Earthing, IS 302-1)	-	500	5% discount for BIS
27.4(Provision for Earthing, IS 302-1)	-	500	5% discount for BIS
27.5(Provision for Earthing, IS 302-1)	-	500	5% discount for BIS
28(Screws & Connections, IS 302-1)	-	500	5% discount for BIS
29.1(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	5% discount for BIS
29.2(Clearances, Creepage distances and Solid Insulation, IS 302-1)	-	500	5% discount for BIS
30.1(Resistance to Heat and Fire, IS 302-1)	-	500	5% discount for BIS
30.2(Resistance to Heat and Fire, IS 302-1)	-	500	5% discount for BIS
31(Resistance of Rusting, IS 302-1)	-	700	5% discount for BIS
32(Radiation, Toxicity and similar Hazard IS 302-1)	-	200	5% discount for BIS
6(Classification- IS 302-1)	-	50	5% discount for BIS
7.1(Marking- IS 302-1)	-	50	5% discount for BIS
7.1(Marking- IS 302-1)	-	50	5% discount for BIS
7.1(Marking- IS 302-1)	-	50	5% discount for BIS
7.1(Marking- IS 302-1)	-	50	5% discount for BIS
7.1(Marking- IS 302-1)	-	50	5% discount for BIS
7.1(Marking- IS 302-1)	-	50	5% discount for BIS
7.1(Marking- IS 302-1)	-	50	5% discount for BIS
11(Heating, IS 302-1)	-	800	5% discount for BIS
11(Heating, IS 302-1)	-	800	5% discount for BIS
11(Heating, IS 302-1)	-	800	5% discount for BIS
11(Heating, IS 302-1)	-	800	5% discount for BIS
17(Overload protection of Transformers and Associated Circuits, IS 302-1)	-	200	5% discount for BIS
25.1(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
25.14(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
26.9(Supply Connection and External Flexible Cords, IS 302-1)	-	500	5% discount for BIS
4(GENERAL REQUIREMENTS)	-	10	5% discount for BIS
5(GENERAL CONDITIONS FOR THE TESTS)	-	10	5% discount for BIS
27(Provision for Earthing)	-	500	5% discount for BIS
29(Clearances, Creepage distances and Solid Insulation)	-	500	5% discount for BIS

Complete

31 Dec, 2023

REVISED TESTING CHARGES W.E.F. 5-7-2021. Included w.e.f. 04-04-2019. EXCLUSIONS: EMI/EMC tests (Electrostatic discharges, radiant fields, fast transient bursts, voltage surges, injected current, voltage dip and interruption, mains signals) (Cl.19.11.4.1 to 19.11.4.7), Components (Capacitors for radio interference suppression, isolating transformer, coupler) (Cl.24.1.1, 24.1.2, 24.1.5).

IS 302 : Part 2 : Sec 9 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision)

10000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
Cl. 6(Verification)	-	50	5% discount for BIS
Cl. 7(Verification)	-	50	5% discount for BIS
Cl.8(Verification)	-	300	5% discount for BIS
Cl.10(Verification)	-	500	5% discount for BIS
Cl.11(Verification)	-	800	5% discount for BIS
Cl.13(Verification)	-	400	5% discount for BIS
Cl.14(Verification)	-	500	5% discount for BIS
Cl.15(Verification)	-	800	5% discount for BIS
Cl. 16(Verification)	-	400	5% discount for BIS
Cl.19(Verification)	-	800	5% discount for BIS
Cl.20(Verification)	-	300	5% discount for BIS
Cl.21(Verification)	-	300	5% discount for BIS
Cl.22(Verification)	-	500	5% discount for BIS
Cl.23(Verification)	-	500	5% discount for BIS
Cl.24(Verification)	-	100	5% discount for BIS
Cl.25(Verification)	-	500	5% discount for BIS
Cl.26(Verification)	-	500	5% discount for BIS
Cl.27(Verification)	-	500	5% discount for BIS
Cl.28(Verification)	-	500	5% discount for BIS
CL.29(Verification)	-	200	5% discount for BIS
Cl.30(Verification)	-	500	5% discount for BIS
Cl.31(Verification)	-	300	5% discount for BIS
Cl.32(Verification)	-	200	5% discount for BIS
Cl. 32 IS 302-2-9(Radiation, Toxicity and similar hazards)	-	200	5% discount for BIS
Cl. 31 IS 302-2-9(Resistance To Rusting )	-	300	5% discount for BIS
Cl. 30 IS 302-2-9(Resistance To Heat, Fire And Tracking)	-	500	5% discount for BIS
Cl. 29 IS 302-2-9(Creepage Distances, Clearances And Distances Through Insulation)	-	200	5% discount for BIS
Cl. 28 IS 302-2-9(Screws and Connections)	-	500	5% discount for BIS
Cl. 27 IS 302-2-9(Provision For Earthing )	-	500	5% discount for BIS
Cl. 26 IS 302-2-9(Terminal For External Conductors )	-	500	5% discount for BIS
Cl. 25 IS 302-2-9(Supply Connections and External Flexible Cables and Cords )	-	500	5% discount for BIS
Cl. 24 IS 302-2-9(Components)	-	100	5% discount for BIS
Cl. 23 IS 302-2-9(Internal Wiring)	-	500	5% discount for BIS
Cl. 22 IS 302-2-9(Construction )	-	500	5% discount for BIS
Cl. 21 IS 302-2-9(Mechanical Strength)	-	300	5% discount for BIS
Cl. 20 IS 302-2-9(Stability and mechanical Hazards)	-	300	5% discount for BIS
Cl. 19 IS 302-2-9(Abnormal Operation )	-	800	5% discount for BIS
Cl. 18 IS 302-2-9(Endurance)	-	10	5% discount for BIS
Cl. 17 IS 302-2-9(Overload protection of transformers and associated circuits.)	-	50	5% discount for BIS
Cl. 16 IS 302-2-9(Leakage Current and Electric strength )	-	400	5% discount for BIS

Complete

31 Dec, 2023

REVISED TESTING CHARGES W.E.F. 5-7-2021. Included w.e.f 29-07-20. Excluding EMI/EMC tests (Electrostatic discharges, radiant fields, fast transient bursts, voltage surges, injected current, voltage dip and interruption, mains signals) (Cl.19.11.4.1 to 19.11.4.7), Components (Capacitors for radio interference suppression, isolating transformer, coupler) (Cl.24.1.1, 24.1.2, 24.1.5)

IS 302 : Part 2 : Sec 23 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision)

24000 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6(Classification)	-	200	5% discount for BIS
7(Marking/ Marking & Instructions)	-	300	5% discount for BIS
8(Protection against Electric Shock/ Protection against Access to Live Parts)	-	750	5% discount for BIS
9(Starting Of Motor Operated Appliances)	-	1	5% discount for BIS
10(Power Input & Current)	-	1000	5% discount for BIS
11(Temperature Rise/Heating)	-	1500	5% discount for BIS
13(Leakage Current and Electric Strength at Operating Temperature)	-	1000	5% discount for BIS
14(Transient Over Voltage)	-	1200	5% discount for BIS
15(Moisture Resistance)	-	1800	5% discount for BIS
16(Leakage Current and Electric Strength)	-	1000	5% discount for BIS
17(Overload Protection/ Overload Protection of Transformers & Associated Circuits)	-	750	5% discount for BIS
18(Endurance)	-	1	5% discount for BIS
19(Abnormal Operation)	-	2000	5% discount for BIS
20(Stability & Mechanical Hazards)	-	500	5% discount for BIS
21(Mechanical strength)	-	500	5% discount for BIS
22(Construction)	-	1000	5% discount for BIS
23(Internal wiring)	-	1000	5% discount for BIS
24(Component)	-	200	5% discount for BIS
25(Supply Connection & External Flexible Cables and Cords)	-	1000	5% discount for BIS
26(Terminals For External Conductors)	-	1500	5% discount for BIS
27(Provision For Earthing)	-	1000	5% discount for BIS
28(Screws & Connection)	-	1200	5% discount for BIS
29(Clearances, Creepage Distances & Solid Insulation)	-	500	5% discount for BIS
30(Resistance to Heat & Fire)	-	2000	5% discount for BIS
31(Resistance to Rusting)	-	1500	5% discount for BIS
32(Radiation ,Toxicity and similar hazards)	-	1100	5% discount for BIS
22.32(CONSTRUCTION)	-	1000	5% discount for BIS

Complete

31 Dec, 2023

REVISED TESTING CHARGES W.E.F. 5-7-2021. Included w.e.f 29-07-2020 Excluding EMI/EMC tests (Electrostatic discharges, radiant fields, fast transient bursts, voltage surges, injected current, voltage dip and interruption, mains signals) (Cl.19.11.4.1 to 19.11.4.7), Components (Capacitors for radio interference suppression, isolating transformer, coupler) (Cl.24.1.1, 24.1.2, 24.1.5)

IS 302 : Part 2 : Sec 15 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)

10500 View breakup
For BIS Samples:1.5 times of BIS Testing charges, For Others

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	50	5% discount for BIS
7(Marking and instructions)	-	50	5% discount for BIS
8(Protection against live parts)	-	300	5% discount for BIS
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	1	5% discount for BIS
10(POWER INPUT AND CURRENT)	-	500	5% discount for BIS
11(HEATING)	-	500	5% discount for BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	300	5% discount for BIS
14(TRANSIENT OVERVOLTAGES)	-	500	5% discount for BIS
15(MOISTURE RESISTANCE)	-	1000	5% discount for BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	300	5% discount for BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	500	5% discount for BIS
18(ENDURANCE)	-	1	5% discount for BIS
19(ABNORMAL OPERATION)	-	1000	5% discount for BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	300	5% discount for BIS
21(MECHANICAL STRENGTH)	-	300	5% discount for BIS
22(CONSTRUCTION)	-	800	5% discount for BIS
23(INTERNAL WIRING)	-	500	5% discount for BIS
24(COMPONENTS)	-	100	5% discount for BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	400	5% discount for BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	300	5% discount for BIS
27(PROVISION FOR EARTHING)	-	500	5% discount for BIS
28(SCREWS AND CONNECTIONS)	-	300	5% discount for BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	300	5% discount for BIS
30(RESISTANCE TO HEAT AND FIRE)	-	700	5% discount for BIS
31(RESISTANCE TO RUSTING)	-	500	5% discount for BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	500	5% discount for BIS

Complete

31 Dec, 2023

IS 302 : Part 2 : Sec 6 (2009)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision)

14500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	50	5% discount for BIS
7.0(Marking and instructions)	-	50	5% discount for BIS
8.0(Protection against access to live part test)	-	300	5% discount for BIS
9.0(Starting of motor-operated appliances test)	-	1	5% discount for BIS
10.0(Power Input and current test)	-	1000	5% discount for BIS
11.0(Heating test)	-	1000	5% discount for BIS
13.0(Leakage current and electric strength test)	-	500	5% discount for BIS
14.0(Transient voltages)	-	800	5% discount for BIS
15.0(Moisture Resistance)	-	1200	5% discount for BIS
16.0(Leakage current and electric strength test)	-	500	5% discount for BIS
17.0(Overload protection of transformers test)	-	500	5% discount for BIS
18.0(Endurance test)	-	1	5% discount for BIS
19.0(Abnormal Operations)	-	1000	5% discount for BIS
20.0(Stability and Mechanical Hazards)	-	500	5% discount for BIS
21.0(Mechanical Strength)	-	500	5% discount for BIS
22.0(Construction verification related tests)	-	1000	5% discount for BIS
23.0(Internal wiring)	-	400	5% discount for BIS
24.0(Components)	-	100	5% discount for BIS
25.0(Supply connections and External Flexible Cords)	-	800	5% discount for BIS
26.0(Terminal for External Conductors)	-	500	5% discount for BIS
27.0(Provision for Earthing)	-	800	5% discount for BIS
28.0(Screws and connections)	-	500	5% discount for BIS
29.0(Clearances and Creepage distances and solid insulation)	-	500	5% discount for BIS
30.0(Resistance to heat and fire)	-	1000	5% discount for BIS
31.0(Resistance to rusting)	-	500	5% discount for BIS
32.0(Radiation, Toxicity and Similar hazards)	-	500	5% discount for BIS
4(General Requirements)	-	10	5% discount for BIS
5(General condition for the tests)	-	10	5% discount for BIS

Complete

31 Dec, 2023

REVISED TESTING CHARGES W.E.F. 5-7-2021. Excluding EMI/EMC tests (Electrostatic discharges, radiant fields, fast transient bursts, voltage s367urges, injected current, voltage dip and interruption, mains signals) (Cl.19.11.4.1 to 19.11.4.7), Components (Capacitors for radio interference suppression, isolating transformer, coupler) (Cl.24.1.1, 24.1.2, 24.1.5)

IS 996 (2009)

Single phase a.c. induction motors for general purpose (Third Revision)

5500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
10(Type of enclosures)	-	500	5% discount for BIS
11(Methods of cooling)	-	100	5% discount for BIS
9.1(General construction (as per Cl. 9 & F-3))	-	200	5% discount for BIS
9(General construction (as per Cl. 9 & F-3))	-	200	5% discount for BIS
9.4.11(General construction (as per Cl. 9 & F-3))	-	200	5% discount for BIS
9(General construction (as per Cl. 9 & F-3))	-	200	5% discount for BIS
9.4.11(General construction (as per Cl. 9 & F-3))	-	200	5% discount for BIS
9.4.13(General construction (as per Cl. 9 & F-3))	-	200	5% discount for BIS
4.1(Rated Voltage)	-	50	5% discount for BIS
4.2(Rated Frequency)	-	50	5% discount for BIS
4.3(Rated Output)	-	25	5% discount for BIS
4.4(Rated Speed)	-	50	5% discount for BIS
7(Dimensions (Cl.App.F-4))	-	200	5% discount for BIS
9.5(Earthing)	-	200	5% discount for BIS
9.5(Earthing)	-	200	5% discount for BIS
9.5(Earthing)	-	200	5% discount for BIS
17.3 (a)(No load test at rated voltage and frequency )	-	200	5% discount for BIS
17.3 (a)(No load test at rated voltage and frequency)	-	200	5% discount for BIS
17.3 (a)(No load test at rated voltage and frequency)	-	200	5% discount for BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	700	5% discount for BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	700	5% discount for BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	700	5% discount for BIS
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	700	5% discount for BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	700	5% discount for BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	700	5% discount for BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	700	5% discount for BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	700	5% discount for BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	700	5% discount for BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	5% discount for BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	5% discount for BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	5% discount for BIS
12.7(Insulation resistance test)	-	300	5% discount for BIS
13.1(High voltage test)	-	300	5% discount for BIS
13.2(Moisture proofness)	-	800	5% discount for BIS
13.3(Leakage current test)	-	200	5% discount for BIS
12.6(Vibration Severity)	-	300	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	200	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
13.2(Moisture proofness)	-	800	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
16.1(Marking and Diagram of connenctions)	-	50	5% discount for BIS
10(Type of enclosures)	-	500	5% discount for BIS
11(Methods of cooling)	-	100	5% discount for BIS
9.1(General construction (as per Cl. 9 & F-3))	-	200	5% discount for BIS
9(General construction (as per Cl. 9 & F-3))	-	200	5% discount for BIS
9.4.11(General construction (as per Cl. 9 & F-3))	-	200	5% discount for BIS
9(General construction (as per Cl. 9 & F-3))	-	200	5% discount for BIS
9.4.11(General construction (as per Cl. 9 & F-3))	-	200	5% discount for BIS
9.4.13(General construction (as per Cl. 9 & F-3))	-	200	5% discount for BIS
4.1(Rated Voltage)	-	50	5% discount for BIS
4.2(Rated Frequency)	-	50	5% discount for BIS
4.3(Rated Output)	-	50	5% discount for BIS
4.4(Rated Speed)	-	50	5% discount for BIS
9.5(Earthing)	-	200	5% discount for BIS
9.5(Earthing)	-	200	5% discount for BIS
9.5(Earthing)	-	200	5% discount for BIS
17.3 (a)(No load test at rated voltage and frequency )	-	200	5% discount for BIS
17.3 (a)(No load test at rated voltage and frequency)	-	200	5% discount for BIS
17.3 (a)(No load test at rated voltage and frequency)	-	200	5% discount for BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	700	5% discount for BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	700	5% discount for BIS
12.1.1(Test for torques at rated voltage and frequency (Cl.12.1.1 & F-6.2 ))	-	700	5% discount for BIS
12.1.1(Test for Breakaway starting current at rated voltage and frequency (Cl.12.1.1 & Cl. 12.5))	-	700	5% discount for BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	700	5% discount for BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	700	5% discount for BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	700	5% discount for BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	700	5% discount for BIS
12.5.1(Full load performance at rated voltage and frequency (Cl.12.5 & F-6.2.4 ))	-	700	5% discount for BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	5% discount for BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	5% discount for BIS
12.2(Temperature-rise test (Cl.12.2 & Cl.F-6.2.5))	-	500	5% discount for BIS
13.1(High voltage test)	-	300	5% discount for BIS
13.2(Moisture proofness)	-	800	5% discount for BIS
13.2(Moisture proofness)	-	800	5% discount for BIS
13.3(Leakage current test)	-	200	5% discount for BIS
12.6(Vibration Severity)	-	300	5% discount for BIS
9.0(Observation)	-	200	5% discount for BIS
7.2(Dimensions)	-	200	5% discount for BIS
11.0(Observation)	-	100	5% discount for BIS
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	10	5% discount for BIS
15.1.5(Noise Level)	-	1	5% discount for BIS
15.2(Specific Requirements)	-	1	5% discount for BIS
15.1(ADDITIONAL TESTS (For ECO - MARK))	-	1	5% discount for BIS
15.1.5(Noise Level)	-	1	5% discount for BIS
15.2(Specific Requirements)	-	1	5% discount for BIS
17.3 (j)(Observation)	-	200	5% discount for BIS
9.5(Observation)	-	200	5% discount for BIS
14.0(Observation)	-	50	5% discount for BIS
16.0(Observation)	-	50	5% discount for BIS
17.4 & 9.4.6.1(Observation)	-	50	5% discount for BIS
17.3 (k)(Current)	-	50	5% discount for BIS
17.3 (m)(Vibration)	-	300	5% discount for BIS
17.3 (g)(Insulation Resistance)	-	300	5% discount for BIS
17.3 (h)(Voltage)	-	200	5% discount for BIS
17.3 (b)(Temperature)	-	500	5% discount for BIS
17.3 (e)(Temperature)	-	500	5% discount for BIS
17.3 (f)(Torque)	-	700	5% discount for BIS
17.3 (c)(Current, Torque)	-	700	5% discount for BIS
17.3 (d)(Voltage, Current, Power, Frequency, Speed, Efficiency, Power factor, Slip)	-	700	5% discount for BIS
17.3 (a)(Voltage, Current, Power, Frequency, Speed)	-	700	5% discount for BIS

Complete

31 Dec, 2023

IS/IEC 60730 : Part 2 : Sec 9 (2011)

Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements Section 9 Temperature Sensing Controls

92500 View breakup
-

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
5(By inspection)	-	250	5% discount for BIS
5.1(By inspection)	-	125	5% discount for BIS
5.2(By inspection)	-	125	5% discount for BIS
6.1(By inspection)	-	13	5% discount for BIS
6.2(By inspection)	-	13	5% discount for BIS
6.3(By inspection)	-	13	5% discount for BIS
6.4(By inspection)	-	13	5% discount for BIS
6.4.3(By inspection)	-	13	5% discount for BIS
6.5(By inspection)	-	29	5% discount for BIS
6.5.1(IEC 60529 and by inspection)	-	10	5% discount for BIS
6.5.2(IEC 60529 and by inspection)	-	9	5% discount for BIS
6.5.3(Annexure N and by inspection)	-	10	5% discount for BIS
6.6(By inspection)	-	13	5% discount for BIS
6.7.1(By inspection)	-	7	5% discount for BIS
6.7.2(By inspection)	-	6	5% discount for BIS
6.8(By inspection)	-	13	5% discount for BIS
6.8.2(By inspection)	-	13	5% discount for BIS
6.9(Annexure H and by inspection)	-	13	5% discount for BIS
6.1(By inspection)	-	13	5% discount for BIS
6.11(By inspection)	-	13	5% discount for BIS
6.12(By inspection)	-	13	5% discount for BIS
6.13(By inspection)	-	13	5% discount for BIS
6.14(By inspection)	-	13	5% discount for BIS
6.15(Annexure J and by inspection)	-	13	5% discount for BIS
6.16(By inspection)	-	13	5% discount for BIS
6.17(Annexure H)	-	13	5% discount for BIS
6.18(Annexure H)	-	13	5% discount for BIS
8(Test finger as shown in figure 2 with force 20 N/30 N)	-	2500	5% discount for BIS
9(By inspection)	-	3000	5% discount for BIS
9.1.1(By inspection)	-	214	5% discount for BIS
9.1.2(By inspection)	-	214	5% discount for BIS
9.1.3(By inspection)	-	214	5% discount for BIS
9.2(By inspection)	-	214	5% discount for BIS
9.3.1(1,5 times the rated current and no-load voltage not exceeding 12 V)	-	218	5% discount for BIS
9.3.2(by inspection, by manual test and by the appropriate tests of 10. 1)	-	214	5% discount for BIS
9.3.4(by inspection, by manual test and by the appropriate tests of 10. 1)	-	214	5% discount for BIS
9.3.5(by inspection, by manual test and by the appropriate tests of 10. 1)	-	214	5% discount for BIS
9.3.6(by inspection, by manual test and by the appropriate tests of 10. 1)	-	214	5% discount for BIS
9.4(by inspection and by plating)	-	214	5% discount for BIS
9.4.1(by inspection)	-	214	5% discount for BIS
9.4.2(by inspection)	-	214	5% discount for BIS
9.5.1(by inspection)	-	214	5% discount for BIS
9.5.2(by inspection)	-	214	5% discount for BIS
10.1.1(By inspection and as per IEC 60988-2-2)	-	77	5% discount for BIS
10.1.1.1(By inspection and as per IEC 60988-2-2)	-	77	5% discount for BIS
10.1.2(By inspection )	-	77	5% discount for BIS
10.1.3(By inspection )	-	77	5% discount for BIS
10.1.4(by inspection, by measurement and by fitting conductors of the smallest and largest cross-sectional areas specified or declared.)	-	77	5% discount for BIS
10.1.5(By measurement)	-	77	5% discount for BIS
10.1.5.1(by inspection, by measurement, by torque test)	-	77	5% discount for BIS
10.1.6(by inspection after cl 10.1.5)	-	77	5% discount for BIS
10.1.7(by inspection)	-	77	5% discount for BIS
10.1.7.1(by inspection)	-	77	5% discount for BIS
10.1.8(The wires of flexible cables and cords are twisted so that there is an even twist of one complete turn in 20 mm.)	-	77	5% discount for BIS
10.1.8.4(For flexible cords the test is repeated using a new conductor which is twisted as before, but in the opposite direction)	-	77	5% discount for BIS
10.1.9(The pull as shown in table 10.1.9 is applied without jerk for 1 min , In the direction of the axis of the conductor space.)	-	77	5% discount for BIS
10.1.11(By inspection)	-	77	5% discount for BIS
10.1.12(An 8 mm length of insulation is removed from the end of a stranded conductor having a nominal cross-sectional area equal to the minimum size used during the test of 10.1.4. One wire of the stranded conductor is left free, and the other wires are fully inserted into and clamped in the terminal. The free wire is bent, without tearing the insulation back , in every direction , but without making sharp bends around barriers.)	-	77	5% discount for BIS
10.1.13(By inspection and after the test of cl 17)	-	77	5% discount for BIS
10.1.14(By inspection)	-	77	5% discount for BIS
10.1.15(Figure 11 or 12)	-	77	5% discount for BIS
10.2(By inspection)	-	77	5% discount for BIS
10.2.1(Table 10.2.1)	-	77	5% discount for BIS
10.2.2(By inspection)	-	77	5% discount for BIS
10.2.3(By inspection)	-	77	5% discount for BIS
10.2.4.1(Figure 14 or 15)	-	77	5% discount for BIS
10.2.4.2(During the test of cl 14)	-	77	5% discount for BIS
10.2.4.3(As per table 10.2.4.3)	-	77	5% discount for BIS
10.2.4.4(As per Figure 16)	-	75	5% discount for BIS
11.1(By inspection)	-	70	5% discount for BIS
11.1.1(By inspection)	-	70	5% discount for BIS
11.1.2(by inspection and by analysis of the material)	-	70	5% discount for BIS
11.1.3(by inspection)	-	70	5% discount for BIS
11.2(by inspection and by test)	-	70	5% discount for BIS
11.2.2(by inspection, by measurement and/or by manual test)	-	70	5% discount for BIS
11.2.3(by inspection, by measurement and/or by manual test)	-	70	5% discount for BIS
11.2.3.2(by inspection, by measurement and/or by manual test)	-	70	5% discount for BIS
11.2.4(as per lEC 60227 or IEC 60245.)	-	70	5% discount for BIS
11.2.5(As per annexure H, cl 11.2.5)	-	70	5% discount for BIS
11.3.1(by inspection and by the tests of clauses 13 and 20)	-	70	5% discount for BIS
11.3.2(by inspection and by the tests of clauses 13)	-	70	5% discount for BIS
11.3.3(by inspection)	-	70	5% discount for BIS
11.3.4(by inspection)	-	70	5% discount for BIS
11.3.5(by inspection)	-	70	5% discount for BIS
11.3.6(by inspection, and for a closed position by the temperature requirements of clause 14, and for open position by the requirements of clause 13, as specifiedfor micro -disconnection. )	-	70	5% discount for BIS
11.3.7(by inspection, and if necessary as per cl 11.3.7.2)	-	70	5% discount for BIS
11.3.8(by inspection)	-	70	5% discount for BIS
11.3.9(By pull not exceeding 45 N vertically downwards, or 70 N at 45° to the vertical)	-	70	5% discount for BIS
11.4.1 (by inspection)	-	70	5% discount for BIS
11.4.2(by inspection)	-	70	5% discount for BIS
11.4.3(by the tests of clauses 15 to 17)	-	70	5% discount for BIS
11.4.4 to 11.4.16(As per relevent type)	-	70	5% discount for BIS
11.5(by inspection)	-	70	5% discount for BIS
11.6.1(by inspection and by manual test)	-	70	5% discount for BIS
11.6.2(by inspection and by manual test)	-	70	5% discount for BIS
11.6.3.1(By inspection)	-	70	5% discount for BIS
11.6.3.2(By inspection)	-	70	5% discount for BIS
11.6.3.3(By inspection)	-	70	5% discount for BIS
11.6.3.4(By inspection)	-	70	5% discount for BIS
11.6.3.5(By inspection)	-	70	5% discount for BIS
11.6.3.6(By inspection)	-	70	5% discount for BIS
11.6.3.7(By inspection)	-	70	5% discount for BIS
11.7.1(By Flexing test as per fig 9)	-	70	5% discount for BIS
11.7.1.2.2(By Flexing test as per fig 9)	-	70	5% discount for BIS
11.7.1.2.3(By Flexing test as per fig 9)	-	70	5% discount for BIS
11.7.2.1 to 11.7.2.10(torque equal to two-thirds of the torque specified in 19.1)	-	70	5% discount for BIS
11.7.2.11 to 11.7.2.15(By pull test as per table 11.7.2)	-	70	5% discount for BIS
11.7.2.11 to 11.7.2.15(By measurement)	-	70	5% discount for BIS
11.8(By inspection)	-	70	5% discount for BIS
11.8.1(By inspection)	-	70	5% discount for BIS
11.8.2(By inspection and as per table 11.8.2)	-	70	5% discount for BIS
11.8.3(by inspection and by connecting cords of the largest cross-sectional eree used in 10.1.4)	-	70	5% discount for BIS
11.9.1(By inspection)	-	70	5% discount for BIS
11.9.1.1(by inspection and manual test)	-	70	5% discount for BIS
11.9.1.2(by inspection and manual test)	-	70	5% discount for BIS
11.9.1.3(by inspection and manual test)	-	70	5% discount for BIS
11.9.1.4(by inspection and manual test)	-	70	5% discount for BIS
11.10.1(by inspection)	-	70	5% discount for BIS
11.10.2(by inspection)	-	70	5% discount for BIS
11.10.3(by inspection and by test of socket-outlet system)	-	70	5% discount for BIS
11.11(Requirements during mounting, maintenance and servicing)	-	70	5% discount for BIS
11.11.1(By inspection)	-	70	5% discount for BIS
11.11.1.1(By inspection)	-	70	5% discount for BIS
11.11.2(By inspection)	-	70	5% discount for BIS
11.11.3.1(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	70	5% discount for BIS
11.11.3.2(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	70	5% discount for BIS
11.11.3.3(by inspection and, for actuating members which do not requ ire a tool for their removal, by the test of 18.9)	-	70	5% discount for BIS
11.11.4(By inspection)	-	70	5% discount for BIS
11.11.5(By inspection and by manual test)	-	70	5% discount for BIS
11.11.6(By inspection)	-	70	5% discount for BIS
11.11.7(By inspection)	-	70	5% discount for BIS
11.12(As per H, cl 11.12)	-	70	5% discount for BIS
12.1(As per IEC 60529)	-	1500	5% discount for BIS
12.1.6.2(Torque test)	-	1500	5% discount for BIS
12.2(Humidity treatment at 91 % and 95 % and temp between 20 to 30°C)	-	1500	5% discount for BIS
12.3(as per cl 12.3.1 to 12.3.7)	-	1500	5% discount for BIS
13.1(as per table 13.1)	-	666	5% discount for BIS
13.2(As per table 13.2)	-	666	5% discount for BIS
13.3.1 to 13.3.4(as per clause 13.3.4)	-	668	5% discount for BIS
14.1(As per table 14.1)	-	2300	5% discount for BIS
14.3(As per table 14.1)	-	2300	5% discount for BIS
15(as per cl 15.1 to 15.4)	-	1200	5% discount for BIS
15.5(as per cl 15.5 to 15.6)	-	1200	5% discount for BIS
15.6.4(42 of table 7.2, and as per annexure AA)	-	1200	5% discount for BIS
15.7(as per annexure J, cl 15.7)	-	1250	5% discount for BIS
16.2(as per cl 16.2.1 to 16.2.3 )	-	2500	5% discount for BIS
16.2.4(test of cl 15 repeated )	-	2500	5% discount for BIS
16.2.4(42 of table 7.2)	-	2500	5% discount for BIS
17.1(by the tests of 17.1.3 as indicated in 17.16)	-	580	5% discount for BIS
17.6(as per cl 17.6.1 and 17.6.2)	-	1000	5% discount for BIS
17.7(as per cl 17.7.1 to 17.7.7)	-	1000	5% discount for BIS
17.8(as per cl 17.8.1 to 17.8.4.1)	-	1000	5% discount for BIS
17.9(as per cl 17.9.1 to 17.9.4)	-	1000	5% discount for BIS
17.1(as per cl 17.10.1 to 17.10.4)	-	580	5% discount for BIS
17.11(as per cl 17.11.1 to 17.11.4)	-	580	5% discount for BIS
17.12(as per cl 17.12.1 to 17.12.5)	-	580	5% discount for BIS
17.13(as per cl 17.13.1 to 17.13.4)	-	580	5% discount for BIS
H 17.1.4.2(as per cl H 17.1.4.2)	-	570	5% discount for BIS
H.17.14(as per cl H 17.4.16)	-	570	5% discount for BIS
17.15.2(as per cl 17.15.2 and 17.15.2.3)	-	580	5% discount for BIS
17.16.106(as per cl 17.7 and 17.8 at an ambient temperature of (20 ± 5) °C)	-	580	5% discount for BIS
17.16.107( 250 thermal cycles.)	-	580	5% discount for BIS
17.16.108( 7 h at a temperature of –20 C (or lower, if declared))	-	580	5% discount for BIS
17.101.1(as per cl 17.101.1 to 17.105)	-	580	5% discount for BIS
J 17.18.5(as per cl J 17.8.5)	-	580	5% discount for BIS
J 17.18.5(as per cl J 17.8.6)	-	580	5% discount for BIS
J 17.17.2(as per table 13.1)	-	580	5% discount for BIS
J 17.17(As per table 13.2)	-	580	5% discount for BIS
J. 17. 18.2(as per cl J. 17. 18.2)	-	580	5% discount for BIS
J. 17. 18.3(as per cl J. 17. 18.3)	-	580	5% discount for BIS
J. 17. 18.4(as per cl J. 17. 18.4)	-	580	5% discount for BIS
18.1.6(By inspection)	-	200	5% discount for BIS
18.1.6.1(By inspection)	-	150	5% discount for BIS
18.1.6.2(By inspection)	-	150	5% discount for BIS
18.1.6.3(Pull test as per cl 18.1.6.3)	-	500	5% discount for BIS
18.2(Impact tester)	-	500	5% discount for BIS
18.5(by the test of 18.5.2 and 18.5.3using the apparatus shown in figure 4)	-	500	5% discount for BIS
18.6(tested in a tumbling barrel as per cl 18.6.2 to 18.6.5)	-	500	5% discount for BIS
18.7(Pull test as per table 18.7)	-	500	5% discount for BIS
18.8(as per cl 18.8.2 and 18.8.3)	-	500	5% discount for BIS
18.9(axial pull of 15N/30N)	-	500	5% discount for BIS
18.101(as per cl 18.101.2 and 101.3)	-	500	5% discount for BIS
18.102(Hydrualic test)	-	500	5% discount for BIS
19.1.1(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	125	5% discount for BIS
19.1.2(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	125	5% discount for BIS
19.1.3(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	125	5% discount for BIS
19.1.4(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	125	5% discount for BIS
19.1.5(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	125	5% discount for BIS
19.1.6(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	125	5% discount for BIS
19.1.8(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	125	5% discount for BIS
19.1.9(by inspection and by the test of 19. 1. 11 to 19. 1.15)	-	125	5% discount for BIS
19.2.1(By inspection)	-	125	5% discount for BIS
19.2.2(By inspection)	-	125	5% discount for BIS
19.2.3(By inspection)	-	125	5% discount for BIS
19.2.4(By inspection)	-	125	5% discount for BIS
19.2.4.1(By inspection)	-	125	5% discount for BIS
19.2.5(By inspection)	-	125	5% discount for BIS
19.2.5.1(By inspection)	-	125	5% discount for BIS
19.2.6(By inspection)	-	125	5% discount for BIS
20.1(as per table 20.2)	-	800	5% discount for BIS
20.2.1(as per table 20.3)	-	800	5% discount for BIS
20.2.2(as per table 20.4)	-	900	5% discount for BIS
21.2.2 to 21.2.6(Ball pressure test as per cl 21.2.5)	-	1600	5% discount for BIS
21.2.2 to 21.2.6(as per annexure G)	-	1600	5% discount for BIS
21.2.7(As per cl G.4)	-	1800	5% discount for BIS
22.1.1(As per cl 21.1.3 to 21.1.6)	-	5000	5% discount for BIS
24.1(as per IEC 60742)	-	1000	5% discount for BIS
24.1(as per IEC 60384-14)	-	1000	5% discount for BIS
24.1(as per IEC 60127 or IEC 60269)	-	1000	5% discount for BIS
25(as per annexure H)	-	5000	5% discount for BIS
27.1(as per annexure H)	-	1875	5% discount for BIS
27.2(as per cl 27.2.1 and 27.2.2)	-	1875	5% discount for BIS
27.3( 85 % of the minimum rated voltage and 110 % of the maximum rated voltage inclusive .)	-	1875	5% discount for BIS
H 27.4(as per cl H 27.4.1 and H 27.4.2)	-	1875	5% discount for BIS
11.1.101(Additional test as per IS 60730 : Part 2 : Sec 9 : 2011 ( Other than test covered in Part 1) by inspection of the manufacturer's declaration and by the test of 18.102. )	-	80	5% discount for BIS
11.1.102(As per IEC 60216-1:2001)	-	80	5% discount for BIS
11.4.13.102(an impact tool is dropped once from a height of 0.60 m )	-	80	5% discount for BIS
11.4.101(as per cl 11.4.101)	-	70	5% discount for BIS
11.4.103(table 7.2 item 103 and by the test of cl 17.15)	-	70	5% discount for BIS
11.4.107(As per annexure DD)	-	70	5% discount for BIS
11.6.3.101(As per table 7, item 117)	-	70	5% discount for BIS
11.101(As per annexure BB)	-	70	5% discount for BIS
12.101(None)	-	1500	5% discount for BIS
12.101.2(15 K+Tmax for 16 hr)	-	1000	5% discount for BIS
12.101.6(a voltage equal to (2 x VR) + 1 000 V is applied at rated frequency for 1 min )	-	500	5% discount for BIS
14.101.1( as per cl 14.102 and 14.102.1)	-	400	5% discount for BIS
15.5.3.101 to 15.5.3.105(According to type of control)	-	1200	5% discount for BIS
15.5.3.109( voltage specified in Table 13.2)	-	1200	5% discount for BIS

Complete

31 Dec, 2023

IS 302 : Part 2 : Sec 25 (2014)

Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens

80000 View breakup
(5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	400	5% discount for BIS
7(Marking and instructions)	-	500	5% discount for BIS
8(Protection against live parts)	-	600	5% discount for BIS
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	200	5% discount for BIS
10(POWER INPUT AND CURRENT)	-	1500	5% discount for BIS
11(HEATING)	-	2300	5% discount for BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	3000	5% discount for BIS
14(IMPULSE VOLTAGE TEST)	-	4000	5% discount for BIS
15(HUMIDITY TREATMENT TEST)	-	5000	5% discount for BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	3000	5% discount for BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	3000	5% discount for BIS
18(ENDURANCE)	-	15300	5% discount for BIS
19(ABNORMAL OPERATION)	-	12500	5% discount for BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	4000	5% discount for BIS
21(MECHANICAL STRENGTH)	-	3000	5% discount for BIS
22(CONSTRUCTION)	-	5000	5% discount for BIS
23(INTERNAL WIRING)	-	2000	5% discount for BIS
24(COMPONENTS)	-	200	5% discount for BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1500	5% discount for BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1500	5% discount for BIS
27(PROVISION FOR EARTHING)	-	2000	5% discount for BIS
28(SCREWS AND CONNECTIONS)	-	1500	5% discount for BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1500	5% discount for BIS
30(RESISTANCE TO HEAT AND FIRE)	-	3000	5% discount for BIS
31(RESISTANCE TO RUSTING)	-	2500	5% discount for BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1000	5% discount for BIS

Complete

31 Dec, 2023

Excluding : cl.22.16 automatic cord reel, cl 22.32 test on ceramic materials cl.22.46 software, cl.24 components. cl.22.106 Interlocks, (Annex CC) salt spray

IS 302 : Part 2 : Sec 26 (2014)

Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision)

25600 View breakup
(5% discount for BIS)

Clause No.	Exclusion	Testing Charges (Excl. Of Taxes)	Remark
6.0(Classification)	-	200	5% discount for BIS
7(Marking and instructions)	-	500	5% discount for BIS
8(Protection against live parts)	-	800	5% discount for BIS
9(STARTING OF MOTOR-OPERATED APPLIANCES)	-	200	5% discount for BIS
10(POWER INPUT AND CURRENT)	-	1000	5% discount for BIS
11(HEATING)	-	1000	5% discount for BIS
13(LEAKAGE CURRENT AND ELECTRIC STRENGTH AT OPERATING TEMPERATURE)	-	1000	5% discount for BIS
14(TRANSIENT OVERVOLTAGES)	-	1000	5% discount for BIS
15(MOISTURE RESISTANCE)	-	2300	5% discount for BIS
16(LEAKAGE CURRENT AND ELECTRIC STRENGTH)	-	1000	5% discount for BIS
17(OVERLOAD PROTECTION OF TRANSFORMERS AND ASSOCIATED CIRCUITS)	-	1000	5% discount for BIS
18(ENDURANCE)	-	200	5% discount for BIS
19(ABNORMAL OPERATION)	-	1800	5% discount for BIS
20(STABILITY AND MECHANICAL HAZARDS)	-	1200	5% discount for BIS
21(MECHANICAL STRENGTH)	-	1200	5% discount for BIS
22(CONSTRUCTION)	-	1500	5% discount for BIS
23(INTERNAL WIRING)	-	1000	5% discount for BIS
24(COMPONENTS)	-	200	5% discount for BIS
25(SUPPLY CONNECTION AND EXTERNAL FLEXIBLE CORDS)	-	1200	5% discount for BIS
26(TERMINALS FOR EXTERNAL CONDUCTORS)	-	1100	5% discount for BIS
27(PROVISION FOR EARTHING)	-	1000	5% discount for BIS
28(SCREWS AND CONNECTIONS)	-	1200	5% discount for BIS
29(CLEARANCES, CREEPAGE DISTANCES AND SOLID INSULATION)	-	1000	5% discount for BIS
30(RESISTANCE TO HEAT AND FIRE)	-	1200	5% discount for BIS
31(RESISTANCE TO RUSTING)	-	1200	5% discount for BIS
32(RADIATION, TOXICITY AND SIMILAR HAZARDS)	-	1000	5% discount for BIS
22.16(Automatic cord reel)	-	1500	5% discount for BIS
22.32(Oxygen bomb for rubber material)	-	1500	5% discount for BIS
22.47(Water pressure inlet)	-	1500	5% discount for BIS
22.3(Flexing test)	-	1500	5% discount for BIS
24(Components)	-	200	5% discount for BIS
5(General conditions for the tests)	-	10	5% discount for BIS
4(General Requirements)	-	10	5% discount for BIS

Complete

31 Dec, 2023

Excluding : cl.22.16 automatic cord reel, cl 22.32 test on ceramic materials cl.22.46 software, cl.24 components.

Bureau of Indian Standards

The National Standards Body of India

Bharat Test House Pvt Ltd 781 Haryana

781, HSIIDC Rai Industrial Estate, Sonipat, Sonipat, Haryana, 131029

9810562215 director@bharattesthouse.com

Scope List