| 4.0(Types) |
- |
0 |
|
- |
| 5,Table 1(Requirements) |
- |
0 |
|
- |
| 5,Table 1(Length ) |
- |
0 |
|
- |
| 5,Table 1(Width ) |
- |
0 |
|
- |
| 5,Table 1(Thickness) |
- |
0 |
|
- |
| 5,Table 1(Specific Gravity) |
- |
0 |
|
- |
| 5,Table 1( Tensile strength (Longitudinal) ,kg/m2) |
- |
0 |
|
- |
| 5,Table 1(Elongation at break (Longitudinal),250 % ,Min) |
- |
0 |
|
- |
| 5,Table 1( Tensile strength (Transverse) ,kg/m2) |
- |
0 |
|
- |
| 5,Table 1(Elongation at break (Transverse),250 % ,Min) |
- |
0 |
|
- |
| 5,Table 1(Tear resistance (machine direction)) |
- |
0 |
|
- |
| 5,Table 1(Tear resistance (Cross direction)) |
- |
0 |
|
- |
| 5,Table 1(Index puncture resistance,N) |
- |
0 |
|
- |
| 5,Table 1(Low temperature crack resistance) |
- |
0 |
|
- |
| 5,Table 1(Hydrostatic resistance,kg/cm2,Min) |
- |
0 |
|
- |
| 5,Table 1(Seam strength,kg,Min) |
- |
0 |
|
- |
| 5,Table 1(Volatile Loss ,% ,Max) |
- |
0 |
|
- |
| 5,Table 1(Peel strength,kN/m,Min) |
- |
0 |
|
- |
| 5,Table 1(Resistance to soil burial) |
- |
0 |
|
- |
| 5,Table 1(Tensile strength (Longitudinal),% change) |
- |
0 |
|
- |
| 5,Table 1(Elongation at break (Longitudinal),% change) |
- |
0 |
|
- |
| 5,Table 1(Tensile strength (Transverse),% change) |
- |
0 |
|
- |
| 5,Table 1(Elongation at break (Transverse),% change) |
- |
0 |
|
- |
| 5,Table 1(Water extraction,% loss in weight) |
- |
0 |
|
- |
| 5,Table 1(Stability to ultraviolet radiations,% retension in Tensile strength) |
- |
0 |
|
- |
| 5,Table 1(Stability to ultraviolet radiations,% retension in Elongation at break) |
- |
0 |
|
- |
| 6.0(Dimensions and tolerances) |
- |
2000 |
|
- |
| 5, Table-2(Length) |
- |
500 |
|
- |
| 5, Table-2(Width) |
- |
500 |
|
- |
| 5, Table-2(Thickness at 20kPa pressure) |
- |
1000 |
|
- |
| 5, Table-2(Tensile Strength (Longitudinal)) |
- |
1500 |
|
- |
| 5, Table-2(Tensile Strength (Transverse)) |
- |
1500 |
|
- |
| 5, Table-2(Elongation at break (Longitudinal)) |
- |
1500 |
|
- |
| 5, Table-2(Elongation at break (Transverse)) |
- |
1500 |
|
- |
| 5, Table-2(Tear Strength (Machine direction)) |
- |
1500 |
|
- |
| 5, Table-2(Tear Strength (Cross direction)) |
- |
1500 |
|
- |
| 5, Table-2(Behaviour during perforation) |
- |
3000 |
|
- |
| 5, Table-2(Height of fall without perforation) |
- |
3000 |
|
- |
| 5, Table-2(Cold crack resistance at low temperature) |
- |
3000 |
|
- |
| 5, Table-2(Hydrostatic Pressure Resistance) |
- |
5000 |
|
- |
| 5, Table-2(Dimensional Stability at 80 degree C) |
- |
3000 |
|
- |
| 5, Table-2(Change in length after heating) |
- |
1500 |
|
- |
| 5, Table-2(Change in width after heating) |
- |
1500 |
|
- |
| 5, Table-2(Resistance to acid and alkali) |
- |
20000 |
|
- |
| 5, Table-2(Strength of welded seam shear resistance) |
- |
3000 |
|
- |
| 5, Table-2(Resistance to static puncturing) |
- |
5000 |
|
- |
| 5, Table-2(Horizontal rate of burning) |
- |
12500 |
|
- |
| 5, Table-2(Vertical rate of burning) |
- |
12500 |
|
- |
| 7.0(Colour ,Surface characteristics and fredom from defects) |
- |
500 |
|
- |
| 7.1(Colour ,Surface characteristics and fredom from defects) |
- |
500 |
|
- |
| 7.2(Colour ,Surface characteristics and fredom from defects) |
- |
500 |
|
- |
| 5,Table 2(Specific Gravity) |
- |
1000 |
|
- |
